Documente Academic
Documente Profesional
Documente Cultură
Course Modules
1. 2. 3. 4. 5. 6.
GPON Overview Site Preparation and Safety Precautions Site Survey AOLT-4000 chassis Overview AOLT-4000 Circuit Cards Overview Topologies for HIS, IPTV ,VoIP & RF
Power Dissipation
10
11
12
USB Local Management Port A USB connector is provided for local shelf management. You can use this connection to enter CLI commands.
Alphion Corporation 2010 all rights reserved
13
14
15
16
17
18
19
20
21
There are three sets of ports on the front of the SWT card. XFP Uplink Ports
The SWT card provides two XFP cages (housings) on its faceplate, labeled 10G Uplink (A and B). Each housing can accommodate an Alphion XFP.
EXP Ports
The SWT card provides two 10/100 Base-TX RJ45 connectors on its faceplate, labeled EXPA and EXP B. Note: These Expansion ports are for FUTURE USE.
Alphion Corporation 2010 all rights reserved
22
23
24
25
The manufacturers label or nameplate identify the type of transceiver, generally by specifying its operating wavelength. Each SFP has two LC connectors for connecting the transmit and receive fibers that go to the GPON network.
Alphion Corporation 2010 all rights reserved
26
27
28
29
30
SFP/XFP Compatibility
31
32
33
GLCP Card
34
35
36
The GLCP card provides four pairs of SFP receptacles on its faceplate, numbered 1A/1B to 4A/4B. Each receptacle can accommodate one Alphion SFP. Four SFPs can actively be transmitting at any one time. Normally, the SFPS plugged into receptacles 1A, 2A, 3A, and 4A are active.
37
38
39
40
41
42
43
44
45
46
I/O Panel
Concealed with Decorative Flip Down Cover Push to Open & Close Timing connectors (Redundant) Alarm Panel Connectors Power Connectors (Redundant) Circuit Breakers (Redundant)
47
48
49
50
Summarization
Different types of Cards Functions of Control Card Functions of Switch Card Functions of GPON Line Card I/O Panel SFPs XFPs
51