Documente Academic
Documente Profesional
Documente Cultură
Myrvete Pazaj General Director General Directorate of Metrology Str. Sami Frasheri no. 33 Tirana, Albania
To establish and to manage national system of metrology in Republic of Albania in accordance with global and regional metrology; To protect consumers interests, through organization of measuring instruments control in field of health, hygiene, environment protection, technical assurance and services; To offer possibilities to producers and users do assure accuracy of measuring instruments, to be competitive with their products in global market
The DPM
DPM is responsible for: 9 Realization and keeping of national measurement standards 9 Their comparisons with international or foreign national standards 9 Implementation of SI units 9 Type evaluation and approval of measuring instruments 9 Enacting metrological regulations 9 Calibration of measurement standards and measuring instruments 9 Verification of measuring instruments 9 Metrological supervision 9 International cooperation
...
The DPM
DPM is a governmental organization A typical public institute with a science link in the field of metrologyis the most important national provider of metrological services It operates under the auspices of the Ministry of Economy, Trade and Energetic (METE) has a staff of approx. 100 members has the central premises (laboratories) in Tirana and 4 Regional Centers in the country DPM is in full reform new staff new management approach (e.g. quality management) new areas related to Quality of Life: fostering networking within country (metrology in chemistry)
Over 100 Albanian experts were trained in Albania, as well as in Austria, Belgium, Bulgaria, Czech Republic and Slovenia
Benefiting from JRC expertise and their ability to link into network of experts across Europe
5
Outcomes:
A national Strategy & Business Plan On developement of metrology system is prepared with the EU assistance under CARDS 2003 project Albania Metrology with assistance of EC DG JRC-IRMM taking into consideration: International requirements ( EU Directives, CIPM MRA) National capabilities (Limitation of resourcesdistribution of the activities) National needs A new law on metrology Prepared with assistance of EC GD JRC-IRMM (CARDS 2003). Adopted by the Parliament in February 14, 2008 Reference for adoption of Acquis Communatuare on metrology
The EU Directive 90/384 EEC NAWI - adopted by the Council of Ministers in June 2006 in implementation. The regulations that transposing of the EU directives on prepackages: 80/232 EEC ; 76/211 EEC ; 75/106 EEC; 75/107 EEC Decision of the Council of Ministers on units of measurement that implements of Directive 80/181/EEC, amended by 85/1/EEC, 89/617/EEC and 1999/103/EC.
Volume Laboratory Standard Volumes 20, 50 l Glass volumes 10 ml 1 l Standard Densimeter DMA 4500
10
Project components:
Building a national metrology centre Measurements standards and equipment Metrological expertise
New location Industrial area, Kashar
11
DPM
dissamination
traceability 9 9
9 9 9 9
Testing laboratories, Reference institutes (food, health, higiene, environment, etc) Calibration laboratories Regulators (inspection bodies) Conformity assesment dodies (labs) Agencies, industry
13
Thank you for your attention! See you on 20th May, the World Metrology Day
Street: Sami Frasheri nr. 33, Tirana, Albania Tel: ++355 4 233 174 Fax: ++355 4 233 462 E-mail: metrology@dpmk.gov.al