Documente Academic
Documente Profesional
Documente Cultură
r =78. Find(i) attenuation constant (ii) phase constant (iii) wave length (iv) intrinsic impedance (v) wave velocity
2. a) Derive an expression for reflection coefficient of an EM wave when it is incident normally on a dielectric. b) Write short notes on the following (i) surface impedance (ii) Brewster angle (iii) Total internal reflection. (c) A parallel polarized wave propagates from air to a dielectric at Brewster angle of 750c, calculate r of the dielectric
3. (a) Derive the expression for input impedance of a line when it is terminated into (i) Z0 (ii) short circuited (iii) open circuited
(b) At 8MHz , the characteristic impedance of a transmission line is (40 j2) and the propagation constant is (0.01 +j0.18) per m. Find primary constants. (c) List out types of transmission lines with diagrams and explain the applications of diagrams and explain the applications of transmission lines.
and
line
(b) Explain what is meant by voltage reflection co-efficient in a transmission line (c) A 75 line is terminated by a load of 120+j80 , find the maximum and minimum impedance on the line.
(b) Calculate the reflection coefficient and VSWR for a 50 line terminated with (i) Matched load (ii) short circuit (iii) +j50 (iv) -j50 . (c) Write the applications of smith chart.
DAMISETTY SRINIVASA
NAIDUS
1.
For a plane wave E=3sin (2107 t-0.4x)ay v/m the wave length making use of the phase constant a) 36 b) 1 c) 6 d) 10 [ ]
2.
= ____________ a) b) c) d) +j
a)
b)
c)
d)
5. The characteristic impedance of a free space is a)277 b)377 c)120 d) both b and c
[
d) Zs = Etan
b)
8. In a god conductor E and H are a) In phase b) out of phase c) not related to each other
[ d) differed by 450
9. The standing wave ratio for perfect transmission line is a)2 b)0 c) 1 d)-1
(a) LG=RC
b) LC=RG
c) RL=CG
d) None
a)
b)
c)
d)
a)
b)
c)
d)
a) (/)
b)
c)
d)
14. If f= 1KHz and = 0.187 the Vp a) 3.46 x 103 km/sec c) 3.56 x 104 km/sec b) 3.36 x 104 km/sec d)4.46 x 104 km/sec
15. Loading is the process of adding _______ a) capacitance b) resistance c) inductance d) conductance
16. A 50 transmission line is connected to a load impedance yielding a VSWR of unity. The load impedance is [ ] a)50 b)100 c)1 d)0
17. If maximum and minimum currents in a transmission line are 4A and 2 A respectively, CSWR is
a)0.5
b)2
c)1
d)4
18. The reflected voltage on a transmission line is zero the VSWR a)0.5 b)2 c)1 d)4
20. A transmission line having the parameters Z0 = 100 , ZR = 400 then reflection coefficient a) 0.4 b)0.6 c) 0.8 d)1.0 [ ]