Documente Academic
Documente Profesional
Documente Cultură
NEW!
ROC L6
The ability to drill in different angles and to accurately set the inclination and control the depth of the hole contributes to the overall economy of the operation.
Technical data
Recommended hole-diameter range: COP 34 92-105 mm 3 5/8"-41/8" COP 44 110-130 mm 4 5/16"-51/8" COP 54 134-152 mm 5 1/8"-51/2" Drill tube diam. . 76/89/102 mm 3"/31/2"/4" Drill tube length 4 m 13 ft Hole Depth, max. 36 m 118 ft Compressor Atlas Copco, screw type compressor XRV 9 Working pressure max. 25 bar FAD 295 l/s Engine Caterpillar, water-cooled diesel engine, CAT 3176 ATAAC Rating at 2000 rpm 272 kW Fuel tank Total capacity Feed Feed length, total Travel length Feed extension Feed rate, max. Feed force, max. Tractive pull, max
365 HP
775 l
200 Usgal
Tramming Tramming speed, max. 3.4 km /h Traction force 110 kN Hill climbing ability 20 Track oscillation 10/8 Ground clearance 405 mm Hydraulic Rotation unit DHR 45H Rotation speed 30-80 Torque, max. 2400 DHR 48H-45 Rotation speed 30-80 Torque, max. 3250 Transport dimensions Weight, optional equipment excluded, approx. 18480 Width 2 490 Length 12700 Height 3 150 Length 10.300 Height 3 995
16"
r/min Nm r/min Nm
1770 lbf/ft
2400 lbf/ft
Flexibility and mobility are two important factors for a smooth operation. The boom and feed movements of ROC L6 gives the rig excellent flexibility for vertical, horizontal and angle drilling.
kg mm mm mm mm mm
40 660 lb 82" 3611" (feed in forward position) 131" 3310" (feed dumped on canopy) 131" Retractable suction hood Track chains with triple grouser pads Toe hole drilling kit Optional equipment Central lubrication system Electric refuelling pump Engine pre-heater, diesel driven Hydraulic support leg Water mist system Track chains with single grouser pads
Standard equipment Air conditioning, heater Tube handling system capacity of 8 tubes, with permutation Fuel saving device Two-speed traction motors Dust collector and pre-separator Feed extension Operators cab, ROPS and FOPS approved Electronic hole inclination and depth control instrument Reduced air pressure for collaring Break-out table
Illustrations in this brochure may show equipment with optionel extras. Specifications and equipment subjects to change without notice. Consult your Atlas Copco sales company for specific information.
mm mm mm m /s kN kN