Documente Academic
Documente Profesional
Documente Cultură
Setup Instructions
The AIRAVE 2.5 you requested is enclosed. The AIRAVE provides a boosted signal for your wireless voice and 3G data services. Its like having your very own cell tower.
2. Plug one end of the yellow Ethernet cable into your broadband modem.
LAN 2 LAN 1
GPS
Reset
Mob Netw
ile
ork
2 3
To Broadband Modem
LAN 2
WAN
LAN 1
WAN
AIRAVE 2.5
Mobile
Network
GPS
12VDC
Broadband
12VDC
AIRAVE
Printed Materials
3. Connect the other end of the cable into the yellow WAN port at the back of the AIRAVE. 4. Reconnect power to your cable or DSL modem and wait about two minutes for the modem to power up and initialize. 5. Plug the power supply connector into the back of the AIRAVE. 6. Plug the other end of the power cord into an available electrical outlet.
WAN
2. Place the GPS antenna on a flat surface and next to a closed window, if possible.
Note: It may take up to 30 minutes for the GPS LED light to become solid green. Note: In large homes, the external GPS antenna can be used to allow the AIRAVE to be placed in a more central location, allowing for more even coverage throughout the house.
to Power Supply
4 5
Power Cord
LAN 1
12VDC
6
co ot ntin he ue rs d id on e
External GPS Antenna Cable Note: You will also need a working electrical outlet and a broadband connection (cable, DSL, etc.) to use this device.
Resources
If your AIRAVE is still not working, you have several resources that will have you up and running in no time: In the Box The Technical and Troubleshooting Guide, with expanded details. Online (sprint.com/airaveaccesspoint) FAQs, technical documentation, and more. The latest User Guide, with detailed instructions for advanced features. Phone Advanced Tech Support for AIRAVE: 1-866-556-7310
WAIT
This process can take up to two hours. Do not interrupt the process during this time.
Reset
LAN 2
Once the four LED lights have stopped blinking and are a steady green, test your AIRAVE connection: Dial *99 on any Sprint phone. You should hear a message that says You are now within AIRAVE coverage.
Note: You will hear three short beeps when placing or answering calls on your wireless phone if you are within range of the AIRAVE.
LAN 1
WAN
12VDC
Important: To ensure the best voice and data quality, always connect the LAN router to your AIRAVE. Do not connect the router directly to your broadband modem or other broadband connection device.
The AIRAVE will display solid green lights when it is activated and functioning properly.
2012 Sprint. SPRINT and the logo are trademarks of Sprint. Other marks are property of their respective owners.
911902