Documente Academic
Documente Profesional
Documente Cultură
cabling systems
AMP NETCONNECT
warranties
AMP NETCONNECT offers three warranties for users of its AMP NETCONNECT Open Cabling Systems: a Five Year General Component Warranty, a 25 Year Extended Component Warranty and a 25 Year Performance Warranty.
AMP NETCONNECT provides these warranties directly to the end user, not to the independent systems integrator or network specialist who installs the network. In a time of rapid market consolidation, this is an important distinction. AMP NETCONNECT warranties far exceed the scope of other manufacturers guarantees. Through them, AMP NETCONNECT users can have complete confidence in their cabling Systems capabilities to meet not just todays needs but tomorrows as well.
NETCON N
years
Warranty
On
T Open Cab C E l
ystem gS in
Extended
ns
ce
rta in
*These 25 Year Warranties apply to premises cabling installations consisting of 100 per cent AMP NETCONNECT products or AMP NETCONNECTapproved products. Systems must be installed by authorised contractors and registered with AMP NETCONNECT . For further details, please ask for a copy of the AMP NETCONNECT Warranty Statement.
W e a rr anty Programm
www.amp.com/networking
The AMP NETCONNECT Category 6 System exceeds all proposed performance and bandwidth requirements for Category 6/Class E components and systems. It will easily support any unshielded twisted pair voice or data application on the market today including Gigabit Ethernet. Its Category 6 performance also forms the basis around which the next generation of applications will be developed. Both Category 6 system performance and Gigabit Ethernet Zero Bit Error Rate have been independently confirmed by Intertek Testing Services (ETL). For more information on the AMP NETCONNECT Category 6 Cabling System, please visit our Web site at www.ampnetconnect.com.
COPPER CAT 6
AMP NETCONNECT Category 6 cable features round design, round solid filler, and non-bonded pairs to provide excellent performance while maintaining ease of installation and termination. Longer-length 2000- and 3000-foot reels are available upon request.
NETWORK
S E RV I C E S
Category 6 Cable
Description
4-Pair, Plenum (CMP) 4-Pair, Non-Plenum (CMR)
X denotes color and packaging: -1=White; 1000-foot reel, -2=White; 1000-foot reel-in-a-box, -3=Gray; 1000-foot reel, -4=Gray; 1000-foot reel-in-a-box, -5=Blue; 1000-foot reel, -6=Blue; 1000-foot reel-in-a-box,- 7=Yellow; 1000-foot reel, -8=Yellow; 1000-foot reel-in-a-box
Part Number
219567-X 6-1427200-X
Description
Black Gray Blue Green Red White Yellow Orange
Part Number
X-219884-X X-219885-X X-219886-X X-219887-X X-219888-X X-219889-X X-219890-X X-219891-X
X denotes length: -1=.5', 2=2', 3=3', 4=4', 5=5', 6=6', 7=7', 8=8', 9=9', 1-0=10', 1-2=12', 1-4=14', 1-5=15', 1-6=16', 2-0=20', 2-5=25', 3-0=30', 5-0=50
Category 6 Jacks
AMP NETCONNECT Category 6 SL Series slim profile jacks are compatible with AMP NETCONNECT SL Series outlets, 110Connect outlets and FLEX-MODE modular furniture faceplates. They also offer the additional flexibility of both 180 and 90 termination Each Category 6 jack comes with a bend-llimiting strain relief.
Description
SL Series 110Connect Jacks, Universal (T568A/T568B) Wiring Cat 6 with Dust Cover
Part Number
1375055-X 1375187-X
X denotes color: -1=Almond, -2=Black, -3=White, -4=Gray, -5=Orange, -6=Blue, -7=Red -8= Yellow, -9=Green, 1- -0=Violet, 1- -1=Violet
Part Number
1375013-1 1375014-1 1375015-1 1375016-1
Workarea Outlets
AMP NETCONNECT British Style Faceplate accept both Shielded and Unshielded 110Connect and SL Series Modular Jacks, MTRJ Work Area Outlet Jacks, 110Connect Multimedia and SL Series Inserts. These British style faceplate are available in single and dual port versions in famous white colour. In addition to the traditional British style faceplate, AMP NETCONNECT offers you a wide selection of standard, flush, angular faceplate, Multimedia & hideout outlets and 2,4 and 6 port office boxes to choose from to meet any requirement. Please Contact for details.
Part #
288004-1 288072-1
Description
British Style Faceplate Dual Shutter British Style Faceplate Singular Shutter
F AX : (051) 2855227
W EB :
E MAIL :
101
Exceeds all TIA and ISO specifications for Category 5e/Class D cabling systems and components Independently confirmed system performance Independently confirmed Gigabit Ethernet Zero Bit Error Rate Single vendor solution ensures optimum system performance AMP NETCONNECT Category 6 performance war ranted for 25 years Easier to install and certify because of increased performance margins Components engineered and verified as a system to deliver enhanced performance
80.0
70.0 60.0
(dB)
Power Su m NEXT
ation Attenu
40 60 Frequency (MH z)
80
100
COPPER CAT 5E
This high-performance cable exceeds the TIAs requirements for Category 5e. Typical crosstalk performance (NEXT, PSNEXT, ELFEXT and PSELFEXT) exceeds TIA requirements by 3 dB or more. Additionally, the cable exceeds TIA requirements for SRL and skew, resulting in less noise from reflected signals and elimination of timing errors in multipair applications. The 24 AWG fourpair cable is available in riser- and plenum-rated versions. The cable is packaged in 1000-foot lengths either on reels or easypayout reel-in-a-box. To reduce scrap during installation, longer-length 2000- and 3000- foot reels are available on request. The outer jacket is available in white, gray, blue or yellow.
NETWORK
S E RV I C E S
Category 5e Cable
Part #
219590-2 219413-2
Description
4-pair , UTP, Enhance Category 5 CM 4-pair, FTP, Enhance Category 5 CM
110Connect Jacks
This eight-position modular jack offers enhanced performance at component, link and channel levels. Additionally, to simplify installation and to offer increased flexibility, the jack allows for universal termination in either the T568A or T568B wiring pattern without field installation of labels. The jack is compatible with existing AMP NETCONNECT faceplates, including the 110Connect and HideAway outlets, office boxes, FLEX-MODE modular furniture outlets and Access Floor Workstation Modules. (See data sheet 1308360.)
Part #
406373-x 1116603-x 1116515-1
Description
Enhanced Cat 5, Non-keyed, 4-pair UTP, Universal Wiring Toolless, Enhanced Cat 5, 4-pair UTP, Universal Wiring Enhanced Cat 5, 4-pair FTP, Universal Wiring
Part #
406483-x
Description
4-pair 24 AWG stranded, black cable, with black snagless boots and blue identification labels. Additional colors available.
219242=Blue, 219246=Yellow, 219243=Green, 219244=Red Note: x denotes length: 1=6", 2=2', 3=3', 4=4', 5=5', 6=6', 7=7' ,8=8', 9=9', 1-0=10', 1-2=12', 1-4=14', 1-6=16', 2-0=20', 3-0=30', 5-0=50'
Part #
406390-1 0-0442113-23 406330-1 406331-1 406332-1
Description
12-port, Enhanced Cat 5, UTP, Universal Wiring, Mounts to 89D bracket included 16 Port (Unloaded), for both FTP and UTP Jacks 24-port, Enhanced Cat 5, UTP, Universal Wiring, 1.75 (1 RMS) height 48-port, Enhanced Cat 5, UTP, Universal Wiring, 3.50 (2 RMS) height 96-port, Enhanced Cat 5, UTP, Universal Wiring, 7.00 (4 RMS) height
Workarea Outlets
AMP NETCONNECT British Style Faceplate accept both Shielded and Unshielded 110Connect and SL Series Modular Jacks, MT-RJ Work Area Outlet Jacks, 110Connect Multimedia and SL Series Inserts. These British style faceplate are available in single and dual port versions in famous white colour. In addition to the traditional British style faceplate, AMP NETCONNECT offers you a wide selection of standard, flush, angular faceplate, Multimedia & hideout outlets and 2,4 and 6 port office boxes to choose from to meet any requirement. Pleas contact for details.
Part #
288004-1 288072-1
Description
British Style Faceplate Dual Shutter British Style Faceplate Singular Shutter
F AX : (051) 2855227
W EB :
E MAIL :
101
Part #
569854-1 569855-1 569857-1 569858-1 569851-1 569852-1
Description
300-pair frame kit, with 4- & 5- pair connecting blocks 300-pair frame kit, with 5-pair connecting blocks 900-pair frame kit, with 4- & 5- pair connecting blocks 900-pair frame kit, with 5-pair connecting blocks 300-pair vertical cable management frame 900-pair vertical cable management frame
Part #
569854-1 569855-1 569857-1 569858-1 569851-1 569446-1
Description
300-Pair, 4- & 5-Pair, 300-Pair, 5-Pair 900-Pair, 4- & 5-Pair 900-Pair, 5-Pair 300-Pair, Cable Mgmt. Frame 900-Pair, Cable Mgmt. Frame
Part #
569854-1 569855-1 569857-1 569858-1 569851-1 569446-1
Description
300-Pair 4- & 5-Pair 300-Pair 5-Pair 900-Pair 4- & 5-Pair 900-Pair 5-Pair 300-Pair Cable Mgmt. Frame 900-Pair Cable Mgmt. Frame
Part #
569477-1 569478-1 569479-1 569480-1
101
Description
1-Pair 110Connect XC Plug 2-Pair 110Connect XC Plug 3-Pair 110Connect XC Plug 4-Pair 110Connect XC Plug
FOR
NETWORK
S E RV I C E S
Description
569523-X 569524-X 569525-X 569526-X 219856-Y 569527-X 569528-X
Part Number
110/110, 1-pair 110/110, 2-pair 110/110, 3-pair 110/110, 4-pair 110/RJ45, 1-pair (4&5) 110/RJ45, T568A 110/RJ45, T568B
-X Dash Number
-2 -4 -6 -8 1- -0
Length in feet
2 4 6 8 10
-Y Dash Number
-1 -3 -5 -7
Length in feet
10 3 5 7
-9 1- -1
9 11
Talk to our technical specialists. We'll work with you to determine what type of product and System solution will solve your particular problem.
F AX : (051) 2855227 W EB :
WWW . NEXTERA . COM . PK
...we will!
INFO @ NEXTERA . COM . PK 101
E MAIL :
The AMP NETCONNECT XG System is a high performance multimode fiber optic cabling system which has been designed to meet the requirements of the 10 GigaBit Ethernet and 10 GigaBit Fibre Channel applications. The system fulfills the specifications of IEEE 802.3ae for 10GBase-SR (10 GigaBit Ethernet serial transmission on 850 nm) and complies to the upcoming fiber type and link class definitions of the 2nd edition of ISO 11801. In addition, the XG products also support the complete range of 50/125 m legacy LED and laser-based applications. All system components have been designed and optimized to provide the best multimode system performance possible in order to ensure compatibility for the upcoming GigaBit and 10 GigaBit network applications.
NETWORK
S E RV I C E S
XG Cable Assemblies
The AMP NETCONNECT XG System cable assemblies are LSZH jacketed and contain OM3 fiber. To ensure a maximum performance on VCSEL & FP Laser links, the cable assemblies come with factory tested Insertion Loss & Return Loss test results.
Y- -X
0- -1 0- -2 0- -3 0- -5 1- -0
Length
1,0 m 2,0 m 3,0 m 5,0 m 10,0 m
Description
MT-RJ / MT-RJ XG Patch Cord MT-RJ / SC Duplex XG Patch Cord SC Duplex / SC Duplex XG Patch Cord
Description
MT-RJ XG Jack Pigtail, 3 m SC XG Pigtail, 2 m, easy strip SC XG Pigtail, 2 m, tight buffer
XG Cable
Description
XG Office Distribution Cable, 4 fiber XG Office Distribution Cable, 6 fiber XG Office Distribution Cable, 8 fiber XG Office Distribution Cable, 12 fiber XG Office Distribution Cable, 24 fiber XG Office Distribution Cable, 48 fiber XG I/E DLT Cable, 12 fiber XG I/E DLT Cable, 24 fiber XG I/E DLT Cable, 48 fiber XG I/E DLT Cable, Rodent Resistant, 12 fiber XG I/E DLT Cable, Rodent Resistant, 24 fiber XG I/E DLT Cable, Rodent Resistant, 48 fiber AMP NETCONNECT XG System Cable contain the OM3 fiber. All cable are ULSZH-jacketed. Notes: DLT = Dry Loose Tube; I/E = Internal/External
Part Number 2-0599144-3 2-0599145-3 2-0599146-3 2-0599148-3 2-0599151-3 2-0599603-3 2-0599156-3 2-0599159-3 2-0599605-3 2-0599617-3 2-0599619-3 2-0599621-3
All existing AMP NETCONNECT System Cable constructions can be constructed with the OM3 fiber. If you are interested in a certain cable design not listed here, please contact your local AMP NETCONNECT office. The telephone numbers are listed below for your convenience.
F AX : (051) 2855227
W EB :
E MAIL :
101
AMP NETCONNECT MT-RJ Connector Fiber Optic System. The brightest light in fiber optics.
Through the campus or building backbone or to the desktop, the MT-RJ Connector System provides the extra bandwidth and distance capabilities demanded by gigabit networking systems and whatever comes after them. Through the use of high-bandwidth multimode and singlemode fiber, the MT-RJ Connector System is an ideal choice for todays high-traffic backbone installations. And the MT-RJ Connector System fea-tures the revolutionary MTRJ con-nector, which packs full fiberoptic speed and reliability into a plug and jack the size of an RJ-45 connector. Its compact size enables increased port density in the closet and at the outlet. The AMP NETCONNECT MTRJ Connector System is easier to install and use than any fiber system has ever been. If youre looking for the fiber system for the third millennium, look directly into MT-RJ. Its brilliant.
NETWORK
S E RV I C E S
Fiber
and MT-RJ
Connectors High performance singlemode and multimode fibers meet all industry performance standards Strippable buffer coating allows for easy connectorization Aramid yarn reinforcement UL and cUL listed OFNR (Riser)/OFNP(Plenum) Designed and tested in accordance with TIA/EIA-568-B,Telcordia GR-409-CORE, IEC 793-1/794-1 and ISO/IEC 11801:2000
Zipcord Cable
Fiber Tight Buffering (900 m)
Description
2 Fiber, 50/125, MM, Zipcord Tight Buffered Cable 2 Fiber, 50/125, MM, Zipcord Tight Buffered Cable (Easy Strip Construction) 2 Fiber, 50/125, MM, Dualan Tight Buffered Cable 4 Fiber, 50/125, MM, Tight Buffered Distribution Style Cable 6 Fiber, 50/125, MM, Tight Buffered Distribution Style Cable 12 Fiber, 50/125, MM, Tight Buffered Distribution Style Cable 2 Fiber, 9/125, SM, Zipcord Tight Buffered Cable 2 Fiber, 9/125, SM, Zipcord Tight Buffered Cable (Easy Strip Construction) 2 Fiber, 9/125, SM, Dualan Tight Buffered Cable 4 Fiber, 9/125, SM, Tight Buffered Distribution Style Cable 6 Fiber, 9/125, SM, Tight Buffered Distribution Style Cable 12 Fiber, 9/125, SM, Tight Buffered Distribution Style Cable
Part Number
2-599142-7 2-599192-7 2-599193-7 2-599144-7 2-599145-7 2-599148-7 2-599142-4 2-599192-4 2-599193-4 2-599144-4 2-599145-4 2-599148-4
2-Fiber
4-Fiber
Notes: - Cable standard Drum length is 2Kms. - All the cables are available with OM3-High performance Fiber(optimized for 10 Gigabit data transmissions) - For standard fiber specifications please contact. - For Hybrid singlemode + multimdoe cables, please contact. - For other fiber counts and lengths, please contact
Backbone/Distribution Loose Tube Armored/All dielectric Optical Fiber Cables (for Outdoor Applications)
AMP NETCONNECT outdoor cables are designed for campus-type environments or for long runs between buildings in aerial, duct or direct buried installations. These cables are available in both dielectric and Armored construction style.
Suitable for: . Intra building links (ducted or direct burial) in a campus environment . Aerial links(whenused with a messenger strand) . Local loop and feeder networks . Outdoor areas with intermittent flooding or moisture . Environments with severe temperature fluctuations Drop or service cables High performance single mode and multimode fibers meet all industry performance standards TIA color-coded fibers for easy identification Dry water-blocking technology Small diameter single tube construction saves space inside ducts Polyethylene UV-protected jacket for harsh outdoor environment Low friction jacket for ease of pulling through ducts Armored construction Designed and tested in accordance with TIA/EIA-568-B, Telcordia GR-20CORE, IEC 793-1/794-1,ICEA-640and ISO/IEC11801:2000
Fibers Filled Buffer Tube Water-Blocking Outer Strength Members Strength Members Corrugated Armor Outer Jacket
Description
6 Fiber, 50/125, MM, Loose Tube, Steel Tape Armored Cable 12 Fiber, 50/125, MM, Loose Tube Steel Tape Armored Cable 6 Fiber, 9/125, SM, Loose Tube Steel Tape Armored Cable 12 Fiber, 9/125, SM, Loose Tube Steel Tape Armored Cable 6 Fiber, 50/125, MM, Loose Tube All Dielectric (Non-Armored) Cable 12 Fiber, 50/125, MM, Loose Tube All Dielectric (Non-Armored) Cable 6 Fiber, 9/125, SM, Loose Tube All Dielectric (Non-Armored) Cable 12 Fiber, 9/125, SM, Loose Tube All Dielectric (Non-Armored) Cable
Part Number
2-599682-7 2-599683-7 2-599682-4 2-599683-4 2-769509-7 2-769510-7 2-769509-4 2-769510-4
Notes: - Cable standard Drum length is 2Kms. - All the cables are available with OM3-High performance Fiber(optimized for 10 Gigabit data transmissions) - For standard fiber specifications please contact. - For Hybrid singlemode + multimdoe cables, please contact. - For other fiber counts and lengths, please contact
F AX : (051) 2855227
W EB :
E MAIL :
101
MT-RJ to MT-RJ
MT-RJ to SC
MT-RJ to ST
The AMP NETCONNECT duplex singlemode (9/125) and multimode (50/125) optical fiber cable assemblies/patchcords are built and tested individually to ensure low light losses and years of dependable performance. These assemblies consist of AMP connectors and optical fiber cable.
SC to SC Description
Multimode 50/125 Optical Fiber Cables Patchcords MTRJ to MTRJ MM Patch Cable, 50/125um MTRJ to SC (Duplex) MM Patch Cable 50/125um MTRJ to ST MM Patch Cable 50/125um SC/SC, MM Duplex Patch Cable, 50/125um SC/ST, MM Duplex Patch Cable, 50/125um ST/ST, MM Duplex Patch Cable, 50/125um Singlemode 9/125 Optical Fiber Cables Patchcords MTRJ to MTRJ SM Patch Cable 9/125um MTRJ to SC (Duplex) SM Patch Cable 9/125um MTRJ to ST SM Patch Cable 9/125um SC/SC, SM Duplex Patch Cable, 9/125um SC/ST, SM Duplex Patch Cable, 9/125um ST/ST, SM Duplex Patch Cable, 9/125um Notes: - x denotes length: x denotes lengths (in Meter): 1=1m, 2=2m, 3=3m, 5=5m, 0=10m - For patchcords with different length requirements and fiber type, please contact.
Part Number
1206617-x 1206619-x 1206620-x 349565-x 349567-x 349561-x 1278033-x 1278031-x 1278298-x 288214-x 492020-x 503162-x
SC to ST
ST to ST
MT-RJ Jack Pigtail Assemblies The AMP NETCONNECT MT-RJ jack cable assembly is a no-epoxy, no-polish two-fiber pigtailed cable assembly used for splicing into distribution cable at the patch panel or consolidation point. This product performs the function of the jack in the plug/jack interface of the MT-RJ system, eliminating the need for a separate adapter. Installation is achieved by fusion splicing or mechanically splicing to the distribution cable. The AMP NETCONNECT MT-RJ connector meets or exceeds the requirements of TIA/EIA568-B and ISO 11801 and is part of the Tyco Electronics 25-year Component and System Warranties.
Description
Multimode 50/125m jack cable assembly Singlemode 9/125m jack cable assembly Notes: - x denotes length: x denotes lengths (in Meter): 1=1m, 2=2m, 3=3m, 5=5m, 0=10m - For pigtail with other connector style (SC and ST) and fiber type, please contact.
MT-RJ
Part Number
1374018-X 1374020-X
SC and ST
101
FOR
NETWORK
S E RV I C E S
Description
MT-RJ Outlet Jack, 50/125m Multimode, Black Jack
Part Number
1278414-1
Description
MT-RJ Patch Panel Jack 50/125/250m Coated Fiber (Black) MT-RJ Patch Panel Jack 50/125/900m Buffered Fiber (Black)
Part Number
1278303-1 1588880-1
SC-Style Connectors
. Epoxy, polish type connectors . Two-piece connectors are tunable . Pre-radiused ferrules . Durability of multimode connectors: 500 cycles . Durability of singlemode connectors: 200 cycles . Operate in temperatures ranging from -40C to +85C
Description
SC, simplex, ceramic ferrule, short boot, MM SC, duplex, ceramic ferrule, short boot, MM SC, simplex, polymer ferrule, MM SC, duplex, polymer ferrule, MM
Part Number
503948-5 504657-5 492210-1 492209-1
ST-Style Connectors
. Epoxy, polish type connectors . Pre-radiused ferrules . Maximum jacket diameter: 3.0mm . Durability of multimode connectors: 500 cycles . Durability of singlemode connectors: 200 cycles . Operate in temperatures ranging from -20C to +75C
Description
ST, ceramic ferrule, metal body/nut, short boot ST, ceramic ferrule, polymer body/nut, short boot ST, ploymer ferrule, polymer body/nut, short boot ST, ceramic w/Ni Broonze Body, 126um, SM ST, ceramic w/Ni Br. Body, 127um, SM ST, ceramic w/Ni Br. Body, short boot - 126um, SM ST, ceramic w/Ni Br. Body, short boot - 127um, SM
Part Number
492458-1 503571-3 503415-1 502579-2 502579-3 502580-2 502580-3
Metal Alignment Sleeve Suitable for Any SC/ST Connector Duplex Adapters Accept Two Simplex Connectors or One Duplex Connector Assortment of Hybrid Configurations Available Mounting Screws Available Available in a Bulk Packing
Description
SC simplex adapters, multimode SC simplex adapters, singlemode SC duplex adapters, multimode SC duplex adapters, singlemode ST simplex adapters, multimode ST simplex adapters, singlemode
Part Number
504614-1 502632-8 504640-1 502776-1 501381-1 504021-1
Description
ST duplex adapters, multimode ST duplex adapters, singlemode SC to ST duplex adapters, multimode SC to ST duplex adapters, singlemode ST to SC duplex adapters, multimode ST to SC duplex adapters, singlemode
Part Number
504662-2 503273-5 502780-3 502780-2 504663-4 503137-5
F AX : (051) 2855227
W EB :
E MAIL :
101
Description
Rack Mount Encloure, Clear Plastic Front Window, Biege color, 2U Unloaded, Support up to 4 Adapter Plates Rack Mount Encloure, Clear Plastic Front Window, Biege color, 3U Unloaded, Support up to 12 Adapter Plates Rack Mount "Sliding Tray" Patch Panel, Black color, 1U Loaded with 6 SC MM Duplex Couplers (12 optical Fibers) Rack Mount "Sliding Tray" Patch Panel, Black color, 1U Loaded with 12 ST MM Simplex Couplers (24 optical Fibers) Rack Mount "Sliding Tray" Patch Panel, Black color, 1U Loaded with 12 ST Simplex Couplers (12 optical Fibers) Rack Mount "Sliding Tray" Patch Panel, Black color, 1U Loaded with 24 ST Simplex Couplers (24 optical Fibers) Rack Mount MTRJ Optical Patch panel, 24 port (MTRJ panel jacks are to be purchased seperately) Wall Mount Fiber Enclosure, Biege color, Support up to 6 couplers (X denotes no. of SC Duplex cooupler loaded: -1=0, -2=2, -3=3, -4=4, -5=6) Wall Mount Fiber Enclosure, Biege color, Unloaded, Support up to 2 Adapter Plates Wall Mount Fiber Enclosure, Biege color, Unloaded, Support up to 4 Adapter Plates
Part Number
288234-1 288234-1 2-1206138-4 4-1206138-4 2-1206136-4 4-1206136-4 1206704-4
Description
Part Number
Multi-mode Optical Fiber Snap-in Adapater Plates SC-SC MM Snap-in Adapters Plate, Duplex, 6-Fiber 84660-1 SC-SC MM Snap-in Adapters Plate, Duplex, 12-Fiber 559596-1 ST-ST MM Snap-in Adapters Plate, Duplex, 6-Fiber 559557-1 *MT-RJ MM Snap-in Adapter Plate, Unloaded 1278328-3 Single-mode Optical Fiber Snap-in Adapater Plates SC-SC SM Snap-in Adapters Plate, Duplex, 6-Fiber 559558-2 SC-SC SM Snap-in Adapters Plate, Duplex, 12-Fiber 559596-2 ST-ST SM Snap-in Adapters Plate, Duplex, 6-Fiber 559515-2 *MT-RJ SM Snap-in Adapter Plate, Unloaded 1278328-3 * Single-mode/Multi-mode MT-RJ Patch Panel Jacks are to be purchase Separately
101
FOR
TOOLS
Includes all tools necessary to install these connectors
. ST-Style, AMP NETCONNECT SC, FSD, FC, D4, FSMA Tool kits include (except . . . . . . . .
NETWORK
S E RV I C E S
Termination Tool Kit, Pro-Installer Epoxy/Polish Type Connectors, with 240V Curing Oven
were specified otherwise): Pro-Crimper II Hand Tool and crimping dies Polishing bushings Polishing film Cable and fiber strippers Scissors Scribe tool Microscope with tripod and power source (on page 184) Epoxy curing oven
Description
Termination Tool Kit, Pro-Installer Epoxy/Polish Type Connectors, with 240V Curing Oven Fiber Optic, Cleave Tool, LightCrimp Plus and MT-RJ Jack
Part Number
501258-8 492674-1
Part Number
58433-4 492026-1
110Connect Tools
The industry standard termination tool for all 110 Connect terminations Each tool comes with a blade, while Pro-installer kits comes with installer knife, pro-impact tool with blade, shears and pouch. Part Number
346859-1 1375308-1
Description
Punchdown 110 connect tool with blade Pro Impact Tool with Extended-life Blade
Description
Professional Modular Plug Tool, 8-Position line, box Professional Modular plug tool kit with 8, 6, 4 position line die sets and carrying case
F AX : (051) 2855227
W EB :
E MAIL :
101
Gig@Flex
Open Structured Cabling System Exclusively from NEXTERA
Patch Panels The infrastructure solution-Exclusively from NEXTERA
NEXTERA is dedicated to providing you with the latest premise and infrastructure solution! We have everything you need for your networkWeather youre transmitting voice, data or video signals. The symbols shown at right identity specially selected product group for Enhanced Category 5 and Category 6 technologies. Use the symbols to put together a complete system from the wall plates to the wiring center. Everything is guaranteed to work together and to meet the appropriate requirements.. Not sure what you need to how to put it together? Just cal us .Our hotline Tech Support is available to help you. For free advice, just dial call today!
NEXTERA patch panels and wiring blocks make managing cross-connect fields easy,Especially movies, adds and changers.
Patch Panels
See page 218 and 220 our other patch panels are on page 221,230,232238,251-252,258 and 262
Jacks
We have the jacks for every connection, from simple CAT5e application to Category 6 highspeed application..
Jacks
For more information See page 218 and 223 also see page 230
Horizontal Cable
NEXTERA carries the finest and most extensive line of horizontal copper media available.
Horizontal Cable
Wallplates
We have all the wallplates and hardware you need to make your cabling connections at the work area.
Wallplates
For more information See page 218 and 223.Also see page 230,236-237and259.
Patch Cables
NEXTERA offer patch cables for every type of connection, so you dont have to worry about compatibility, quality or performance.
Patch Cables
Backbone Cable
Call NEXTERA for backbone cable to connect telecommunication centers, equipment rooms and entrance facility in many different application
Backbone Cable
Cables
Part Number
TBC6-UTP TBC6-FTP TBC5E-UTP TBC5E-FTP
Description
CAT 6, 4 Pair, Solid, unshielded twisted pair (UTP) cable CAT 6, 4 Pair, Solid, Foiled twisted pair (FTP) cable CAT 5E, 4 Pair, Solid, unshielded twisted pair (UTP) cable CAT 5E, 4 Pair, Soild, Foiled twisted pair (FTP) cable
Patch Cords
NEXTERA is proud to offer a complete line of Category 6 and 5E copper patch cords. High quality and low cost, NEXTERA Patch cords deliver superior performance to your Local Area Network and can be used with industry standard communication products.
Part Number
TBC6PCUTP-x TBC6PCFTP-x TBC5EPCUTP-x TBC5EPCFTP-x
Description
CAT 6, 4 pair, Stranded, UTP, patch cord CAT 6, 4 pair, Stranded, FTP, patch cord CAT 5E, 4 pair, Stranded, UTP, patch cord CAT 5E, 4 pair, Stranded, FTP, patch cord
Patch Panels
NEXTERA Category 6 and 5E patch panels are available in 12 through 48 port configurations. These panels meet all TIA/EIA TSB40A specifications. The new version of 110D terminal block can be used for both "Krone & 110"tool ,and has 568B and 568A color code both on the top of new version 110D IDC for easy installation. To save the cost of rack and cabinets, Wall Mount Brackets are also available for 19" rack mount patch panels for direct mounting of the same on walls or any other suitable place. Please contact for details.
Part Number
TBC6PP-U12W TBC6PP-U12R TBC6PP-U24R TBC6PP-U48R TBC5EPP-U12W TBC5EPP-U12R TBC5EPP-U24R TBC5EPP-U48R TBC5EPP-S16R TBC5EPP-S12R TBC5EPP-S16R TBC5EPP-S24R TB-329/WH
Description
CAT 6, 12 port, UTP patch panel, Universal Wiring, Wall mount CAT 6, 12 port, UTP patch panel, Universal Wiring, 19" rack mount CAT 6, 24 port, UTP patch panel, Universal Wiring, 19" rack mount CAT 6, 48 port, UTP patch panel, Universal Wiring, 19" rack mount CAT 5E, 12 port, UTP patch panel, Universal Wiring, Wall mount CAT 5E, 12 port, UTP patch panel, Universal Wiring, 19" rack mount CAT 5E, 24 port, UTP patch panel, Universal Wiring, 19" rack mount CAT 5E, 48 port, UTP patch panel, Universal Wiring, 19" rack mount CAT 5E, 16 port, STP patch panel, Universal Wiring, 19" rack mount CAT 5E, 12 port, STP patch panel, Universal Wiring, 19" rack mount CAT 5E, 16 port, STP patch panel, Universal Wiring, 19" rack mount CAT 5E, 24 port, STP patch panel, Universal Wiring, 19" rack mount Wall mount bracket for 19" UTP patch panels
Jacks
NEXTERA copper jacks are available for Category 6 and 5E standards and offered shielded and unshielded versions to meet any cabling requirement. These jacks are developed for high speed high speed network applications and meet/exceed ANSI EIA/TIA 568A (TSB-40A); ISO/IEC 11801 standards.
Part Number
TBC6UJ-X TBC6TUJ-X TBC5EUJ-X TBC5ETUJ-X TBC5ESJ-X
Description
CAT 6, 4 Pair, , UTP Jack, Universal Wiring CAT 6, 4 Pair, , UTP Jack, Universal Wiring (Toolless) CAT 5E, 4 Pair, , UTP Jack, Universal Wiring CAT 5E, 4 Pair, , UTP Jack, Universal Wiring (Toolless) CAT 5E, 4 Pair, , STP Jack, Universal Wiring (Shielded)
101
FOR
NETWORK
S E RV I C E S
Part Number
TBWOFP2S-X TBWOFP2A-X TBWOSMB2S-X TBWOFP-BB
Description
UK style, standard faceplate, Dual Shutter (unloaded) UK style, angular faceplate, Dual Shutter (unloaded) 2 Port Surface Mount Box (unloaded) Backbox for UK style faceplate
Modular Plugs
NEXTERA RJ-45 modular plugs feature super flexibility to work with both stranded and solid UTP and FTP cables. . These eight-conductor modular plugs are designed for high-speed applications and meet or exceed category 5e specifications.
Part Number
Description
TBMPUTPS-SO-X 8-position RJ-45 modular plug, UTP, solid TBMPUTPS-St-X 8-position RJ-45 modular plug, UTP, stranded TBMPUTPH-SO-X 8-position RJ-45 modular plug, UTP, solid TBMPUTPH-St-X 8-position RJ-45 modular plug, UTP, stranded TBMPSTPH-SO-X 8-position RJ-45 modular plug, STP, solid TBMPSTPH-St-X 8-position RJ-45 modular plug, STP, stranded Note: X denotes number of plugs in a pack (5-50 and 10-100)
Modular Plugs
NEXTERA's horizontal types cable management tray systems is a perfect solution to organize your cables and patchcords. These management trays let you minimize length of exposed cables and maintain proper twists and bend radius.
Part Number
TB311/1 TB311/2
Description
19" cable Management Tray (1 Unit) 19" cable Management Tray (2 Unit)
F AX : (051) 2855227
W EB :
E MAIL :
101
CABLE TRAY
CABLOFIL is a cable tray concept centred on performance, safety and economy, three qualities which make CABLOFIL the cable tray system preferred by installers. CABLOFIL adapts to the most complex configurations, and its structure gives maximum strengths for minimum weight. The ease of creating fittings, carried out on site, as well as the wide range of unique and universal accessories gives complete with exceptionally fast installation. Cablofil's special Safe-T-Edge protects installers from sharp wires while it prevents cables from fraying. The wire is smooth and round to resist dirt and dust build-up...
Easy and Fast W i t h t h e n e w FA S F a s t Assembling System, installation time is reduced: There is no need for screws, bolts, etc., simply bend the anchoring tab on the wire ... and that's all. The new range of FAS system profiles and brackets greatly reduces cable tray installation time even more, in all situations.
Flexibility Cable can leave the tray at any point by passing through the mesh. The open construction of CABLOFIL makes it easy to locate cables. CABLOFIL adapts on site to all unforeseen obstacles, avoiding delay through waiting for specific fittings.
101
FOR
CABLE TRAY
. 30, 54 and 105mm deep tray is
available in 3 meters straight sections
NETWORK
S E RV I C E S
Hot Gal
Code 000023 000033 000043 000053 Kg / m 0.70 0.89 1.09 1.47
S/S 316L
Code 000014 000024 000034 000044 000054
S/S 304
Kg / m 0.48 0.65 0.83 1.02 1.38
Kg / m Code 0.48 0.65 0.83 1.02 1.38 000018 000028 000038 000048 000058
F AX : (051) 2855227
W EB :
E MAIL :
101
Splicing
Cablofil offers a number of splices for wire cable tray to fill any installation demand. All of these splicing options were designed with one goal - to make installation EASY. Some of our splices require NO TOOLS for installations. Yet each option offers a durable, strong splice that's been tested and proven in installations around the world.
Nut/Bolt/Clamp Assembly
CE 40 Splice Washer
101
FOR
NETWORK
S E RV I C E S
Wall Brackets
Look to Cablofil for the most complete line of wall attachment hardware. Many of these brackets feature the patented FAS system for attaching tray directly to the wall bracket without any additional hardware. It reduces install time and saves labor costs.
CM 50 Bracket
CS Bracket
CU Universal Brackets
CSN Brackets
Hanging Supports
From ceiling hung installations in a communications closet to a trapeze hung installation in a factory, Cablofil has the right hanging accessory for you. Each hanging accessory is specifically designed to work with wire cable tray and many utilize patented FAS system for fast tray attachment without the need for additional hardware.
AS Suspension Staples
CSN Profile
CSNC Bracket
F AX : (051) 2855227
W EB :
E MAIL :
101
Bolt
EZ HN Hex Nut
EZ Flat Washer
Threaded Rod
Accessories
Each of these accessoriess will enhance the Cablofil installation. They are designed to maximum performance with a minimum of install time. For example, our award winning FAS Roller is the perfect answer to the problems of pulling cables. When planning your next project, look through all of the accessories to make of the most of your Cablofil installation.
FAS Roller
Cover
Velcro On A Roll
Cable Exit
Bolt Cutter
Mounting Plate
Divider Strip
101
FOR