Documente Academic
Documente Profesional
Documente Cultură
Horizontal Directional Drilling Rig, Frame Version HDD-Rigs 1,500 kN - 6,000 kN pull force (150 t - 600 t) the low cost version 70 kNm - 180 kNm torque
PRIME DRILLING is operating worldwide and is specialized in Horizontal Directional Drilling Technology. With our optimized products and 30 years of experience in the construction of HDDRigs we have set standards in the international HDD-industry. We do not only oer you technology tailor-made for your projects, but simultaneously provide experience and know- how. Your investment oers you the inestimable advantage of independence, error prevention and cost saving. From technical training, planning and preparation up to execution of the job we are always on your side at all times. We support our customers with their projects directly on site. We assist them systematically and give advice on their projects also in the long term to meet our objectives: optimal technology on optimal arranged job-sites for successful clients, who can operate their equipment independently. It does not matter where you are, but we will keep our word: whether in the Arctic, Sahara or Himalayas, the PRIME DRILLING modular construction system will be adjusted individually to any geographical and geological challenges - from standard version up to customer-made product.
Standard equipment
Breakout system High power hydraulic motors Bentonite supply Protection hose guide chain Walkway with hand rail
All our drilling rigs are equipped with Load-Sensing Hydraulic Systems but are also available as crawler version, trailer version or frame version. The Diesel engine including the hydraulic system can be mounted on board or can be provided as a separate power pack (20 ft container) similar to the trailer or frame version. With the separate power pack the customer can choose between 330 kW, 470 kW, 570 kW and 900 kW drive capacity. The power rotary head which is driven by hydraulic motors develops of a torque rating from 70 kNm to 180 kNm and can be selected in two or three di erent gear steps.
Furthermore the drilling rig is available with drill rod supplysystem, hydraulic manipulator, drill rod crane, camera system, a drill data monitoring system as well as further options. According to the customers requirements, the devices are equipped with a mounted control cabin or a separate operating container, which provides the operator an optimal view.
Camera and lights for power rotary head and breakout system
Modular construction
Length
Width
10
Height
Length
Height 11
Length
Height
Width
12
Length
Height 13
14
15
Bentonite components
Bentonite Pumps
Power rating /motor Speed Volume rate Pressure max. Container size PD X-2.000 1,6 HD PD X-2.000 2,1 HD PD X-2.000 2,4 HD PD X-3.000 2,7 HD PD X-3.000 3,0 HD PD X-3.000 3,5 HD 280 kW 330 kW 380 kW 470 kW 520 kW 570 kW 155 rpm 200 rpm 235 rpm 180 rpm 200 rpm 230 rpm 1,600 l/min 2,100 l/min 2,400 l/min 2,700 l/min 3,000 l/min 3,500 l/min 120 bar 110 bar 107 bar 113 bar 102 bar 107 bar 20 ft 20 ft 20 ft 20 ft 20 ft 20 ft
16
17
HDD-accessories
Directional drill rods
Size 3 3 3 3 5 5 5 6 58 7 58 Drill rod length 5,000 mm 6,000 mm 5,000 mm 6,000 mm 5,000 mm 6,000 mm 9,600 mm 9,600 mm 9,600 mm Thread type 2 78 IF 2 78 IF 3 IF 3 IF 4 IF 4 IF 4 IF 6 58 FH 6 58 FH DS Weight 115 kg 130 kg 125 kg 140 kg 190 kg 205 kg 315 kg 397 kg 485 kg
Hydraulic assembly
PRIME DRILLING GmbH Ludwig-Erhard-Strae 4 D-57482 Wenden-Gerlingen Tel. +49 (0) 2762 930 96-0 Fax +49 (0) 2762 930 96-50 E-Mail: info@prime-drilling.de www.prime-drilling.de
20
03/2013
PRIME DRILLING has been manufacturing high-quality Horizontal Directional Drilling Rigs and components on its 2,000 m2 production area and 600 m2 office area with nearly 50 employees since the year 2000.