Documente Academic
Documente Profesional
Documente Cultură
Catalogue 2011/2012
Air-termination Stud
For implementing air-termination systems according to the mesh method, for walkable and drivable flat roofs e.g. parking decks Material StSt
see page 32
FS Clamps
For connecting of air-termination rods/air-termination spikes with one or two conductors With special pressure disc for longitudinal and cross connection Connection of two conductors provides better distribution of lightning current see page 158
New Products
13 19
35
61 95
99 117
133 159
165 177
187 199
205 221
225 235
239
251 254
This catalogue replaces the Main Catalogue published in 2009. We reserve the right to introduce changes in performance, configuration and technology, dimensions, weights and materials in the course of technical progress.
www.dehn.de
263 271
Misprints, errors and alterations excepted. Reproduction in any form whatsoever is forbidden without our authorisation.
www.dehn.de
DEHN worldwide
Algeria Argentina Australia Austria Belgium Belize Bolivia Brazil Bulgaria Canada Cap Verde Chile China Colombia Costa Rica Croatia Czech Republic Denmark El Salvador Estonia Finland France Great Britain Greece Guatemala
Honduras Hungary Iceland India Ireland Israel Italy Japan Latvia Lebanon Lithuania Luxembourg Malaysia Mauritius Macedonia Mexico Netherlands New Zealand Nicaragua Nigeria Norway Oman Pakistan Panama Peru
Poland Portugal Romania Russia Saudi Arabia Serbia Singapore Slovakia Slowenia South Africa Spain Sri Lanka Sweden Switzerland Syria Taiwan Thailand Tunisia Turkey Uganda United Arab Emirates USA Venezuela
We shall be pleased to name you the right contact person of our subsidiaries or representatives. Export Tel. +49 9181 906 462 Fax +49 9181 906 444 or export@dehn.de
www.dehn.de
www.dehn.de
www.dehn.de
Our aspriation and intention now and in future especially for our customers interests is to be always one step ahead of the state of engineering and to be better. In our highly specialized laboratories the active parameters of lightning can be simulated and thus installations/ systems can be tested for lightning safety and upgraded if necessary. Special solutions for lightning and surge protective systems can anytime
Part 3: Physical damage to structures and life hazard Part 4: Electrical and electronic systems within structures
Part 4: Requirements for conductor fasteners Part 5: Requirements for earth electrode inspection housings and earth electrode seals
www.dehn.de
DEHN informativ
Brochures, Data Sheets, Test Reports and Audit Records DEHN provides you with detailed installation instructions, data sheets and test reports in order to support you already in the designing of installations and systems. The necessary technical details are practice conveniently prepared. The papers are being updated continuously and are always available under www.dehn.de. But also after the erection of the system we will support you in creating a documentation e.g. in case of a system inspection with the corresponding test protocols (e.g. inspection of the lightning protection system according to EN 62305-3 or documentation of the earth-termination system). These are also available under www.dehn.de. Numerous brochures with practical information on our products as well as many application proposals complete the offer and can be downloaded also from www.dehn.de service range. Specialist Publication LIGHTNING PROTECTION GUIDE For nearly 30 years the LIGHTNING PROTECTION GUIDE by DEHN + SHNE has been an indispensible aid for the technical expert and is now the brandmark for practice orientated technical literature in the field of lightning and surge protection of buildings and structures. Whatever you may need for the practical understanding of lightning and surge protection the LIGHTNING PROTECTION GUIDE provides comprehensive and detailed expert knowledge about e.g. standards, regulations, projecting fundamentals, installation examples and application proposals for special cases on more than 300 pages. The LIGHTNING PROTECTION GUIDE by DEHN + SHNE is available as book or pdf file on CD or under www.dehn.de. Planning Software for Lightning Protection Systems The electronic decision aid DEHNsupport Toolbox offers the planner and installer easy and practical programmes. These range from the risk management to the calculation of the air-termination rod length, the determination of the separation distance to the calculation of the length of the earth electrodes. Thus designing of a lightning protection system will be considerably easier. Please see also the following page for more details.
DEHN-Seminars DEHN + SHNE offers a wide spectrum for practice orientated education and training in the fields of surge protection, lightning protection / earthing and safety equipment. The seminars impart practical knowledge about the application of components and devices in special structures and systems. More details and information is available under www.dehn.de.
DVD A picture is worth a thousand words. With DVD DS708 we provide 3DAnimated films to show the use of products and to meet DEHN + SHNE on a tour through the company with the DEHNtour DS707 DVD. Tender Specifications A current description of our products for tenders (delivery list texts) is available in the service download range under www.dehn.de.
DEHN quick and direct Proximity to our customers is important to us! For any questions on special application topics of the DEHN products we are at your disposal with the service hotline 09181 / 906-750. You can also contact our competent partners in your region. We shall be pleased to name you the contact person or our subsidiaries or representatives. The catalogue lightning protection / earthing comprises components for lightning protection, earthing and equipotential bonding. Further technical information is available under www.dehn.de. We also shall be pleased to send you the brochures.
www.dehn.de
DEHNsupport Toolbox
sa s well a r a n io t a u le on o d inform Detaile sion is availab .de er hn demo v page www.de home
Calculation Programme for Lightning Protection Systems The DEHNsupport Toolbox provides a calculation tool for the specific determination and realisation of lightning and surge proteciton measures based on the requirements of the EN 623051 to 4 standard series. In addition to international requirements, there are country-specific adaptations which were integrated into the software and which are regularly extended. In order to give the user a targeted support for his application the DEHNsupport Toolbox offers a variety of planning aids: DEHN Risk Tool Risk management in accordance with EN 62305-2 Risk analysis: A risk analysis allows to assess the potential risk for structures and to take specific measures to reduce the risk. The result is the selection of protection measures which make good economic sense and which are ideally suited for the characteristics of the structure and the type of utilisation. DEHN Distance Tool Calculation of the separation distance in accordance with EN 62305-3 Base of the DEHN Distance Tool module is a 3D building model with automatic calculation of the separation distance s. Calculation is based on the nodal point potential method. The automatic calculation saves time and simplifies the work steps. DEHN Air-termination Tool Calculation of the air-termination rod length in accordance with EN 62305-3 This software tool allows for calculating of air-termination rod lengths depending on the class of the lightning protection system. DEHN Earthing Tool Calculation of the earth electrode length in accordance with EN 62305-3 This software provides an aid to determine the necessary earth electrode length depending on the type of earth electrode and on the specific earth resistance.
www.dehn.de
System requirements 1 Operating Systems Supported: Windows 2000 Windows XP Windows 2003 Windows Vista Windows 7 1 Office package with word processing and spreadsheet 1 Internet connection (optional)
Fax
Step 1: Salt mist treatment This test is intended for components or devices which were designed to withstand exposure to a saline atmosphere. The test equipment (Figure 1) consists of a salt mist chamber where the specimens are tested using severity 2 for more than three days. Severity 2 includes three spraying phases with a 5% sodium chloride solution (NaCl) of 2 h each at a temperature between 15 C and 35 C and subsequent humidity storage between 20 h and +2 22 h at a relative humidity of 933 % and a temperature of 40 2 C in accordance with EN 60068-2-52. Step 2: Humid sulphurous atmosphere treatment This test is to evaluate the resistance of materials or objects to condensed humidity containing sulphur dioxide in accordance with BS EN ISO 6988. The test equipment (Figure 2) consists of a test chamber where the specimens are treated with a concentration of sulphur dioxide of 667 ppm (in volume)
www.dehn.de
Connection components Connection components, or often simply called clamps, are used for the installation of lightning protection systems to connect conductors (down conductor, air-termination conductor, earth entry) with one another or to an installation. Depending on the type of clamp and clamp material, a lot of different clamp combinations are possible. The type of conductor routing and possible material combinations are decisive for this. Type of conductor routing means that the clamp connects the conductor or conductors in cross or parallel arrangement. A lightning current load causes electrodynamic and thermal forces which act on the clamp and have to be taken up by the clamp. The resulting forces are highly dependant on the type of conductor routing and the clamp connection. Table 1 shows materials which can be combined without causing contact corrosion.
9
Table 1: Material combinations of air-termination systems and down conductors with one another and with structural parts
The combination of different materials with one another and their different mechanical strengths and thermal properties have different effects on the connection components in the event of a lightning current load. This is particularly evident for connection components made of stainless steel (StSt) where high temperatures occur due to the low conductivity as soon as lightning currents flow through the connection components. Therefore a lightning
current test in compliance with EN 50164-1 has to be carried out for all clamps. To test the worst case scenario, the material combinations specified by the manufacturer have to be tested apart from the different conductor arrangements.
Test procedure using the example of an MV clamp At first it must be determined how many combinations are to be tested. The MV clamp used is made of stainless steel (StSt) and hence can be combined with steel, aluminium, StSt and copper conductors as stated in the above table. Moreover, it can be connected in cross and parallel arrangement which also has to be tested. This means that there are eight possible test combinations for the MV clamp used (Figures 3 and 4). In accordance with EN 50164 each of these test combinations has to be tested on three suitable specimens / test set-ups. This means that 24 specimens of this single MV clamp have to be tested to cover the complete range. Every single specimen is mounted with the adequate tightening torque in
compliance with normative requirements and is subjected to artificial ageing by means of salt mist and humid sulphurous atmosphere treatment as described above. For the subsequent electrical test the specimens have to be fixed on an insulating plate (Figure 5). Three lightning current impulses of 10/350 s wave shape with 50 kA (Normal duty) and 100 kA (Heavy duty) are applied to every specimen. After being loaded with lightning current, the specimens must not show signs of damage. The transition resistance (measured above the clamp) for a stainless steel clamp must not exceed 1 m in case of normal duty and 2.5 m in case of heavy duty. The required loosening torque has to be ensured. A manufacturers test report is prepared for every test combination. A detailed test report is available on request from the manufacturer or a less detailed report (Figure 6) can be downloaded from the internet (e.g. www.dehn.de Products Product data). For installers of lightning protection systems this means te that the connection compos ted nents have to be selected for the duty (H or N) to be expected on site. This means that a clamp for H duty (100 kA) has to be used for e.g. an airtermination rod (full lightning current) and a clamp for N duty (50 kA) has to be used e.g. in a mesh or at an earth entry (lightning current already distributed). Conductors EN 50164-2 also places special demands on conductors such as air-termination and down conductors or earth electrodes e.g. ring earth electrodes, for example: Mechanical properties (minimum tensile strength, minimum elongation), Electrical properties (max. resistivity) and Corrosion resistance properties (artificial ageing as described above). The mechanical properties have to be tested and adhered to. Figure 7 shows the test set-up for tensile testing of circular conductors (e.g. aluminium). The
www.dehn.de
10
Figure 5: Specimen fixed on insulating plate (MV clamp) for a test in the impulse current laboratory
Manufacturers Test Report
Test according to EN 50164-1
Application: above ground Connected conductor Conductor (1): Rd 8 St/tZn Conductor (2): Rd 8 St/tZn Conductor (1): Rd 8 Cu Conductor (2): Rd 8 Cu Conductor (1): Rd 8 StSt Conductor (2): Rd 8 StSt Conductor (1): Rd 8 Al Conductor (2): Rd 8 Al Legend
Lightning current carrying capability class H Lightning current carrying capability class N 100 kA (10/350 s) 50 kA (10/350 s)
Test result N H H H
www.dehn.de
11
12
www.dehn.de
Conductors
Round wires according to EN 50164-2, for use in lightning protection and earth-termination systems
Round Wires
DEHNalu wire
Al and AlMgSi must not be installed directly (without distance) on, in, or under plaster, mortar or concrete nor in soil.
Part No. Conductor Cross section Material Characteristics/Material No. Standard Coil weight Packing unit
mm mm2
kg m
Part No. Conductor Cross section Material Characteristics/Material No. Standard Outer Coating material Coating thickness Coil weight Packing unit
mm mm2
mm mm kg m
Steel wire
with zinc coating * 50 m average (approx. 350 g/m2)
Part No. Conductor Cross section Material Standard Short-circuit current (50 Hz) (1 s; ) 300C) Coil weight Packing unit
mm mm2
kA kg m
approx. 50 127
www.dehn.de
13
Round Wires
Steel wire with plastic coating
Conductors
Type with plastic coating as an additional mechanical protection/corrosion protection e.g. at connections to the lightning protection system
Part No. Conductor Cross section Material Standard Outer Coating material Coating thickness Coil weight Packing unit
mm mm2
mm mm kg m
Copper wire
Part No. Conductor Cross section Material Characteristics/Material No. Standard Short-circuit current (50 Hz) (1 s; ) 300C) Coil weight Packing unit
mm mm2
kA kg m
Part No. Conductor Cross section Material Characteristics/Material No. Standard Short-circuit current (50 Hz) (1 s; ) 300C) Coil weight Packing unit
mm mm2
kA kg m
50 125
50 80
12 20
50 125
37 7.5
4.7
mm mm mm pc(s)
max. 0.5
14
21
www.dehn.de
Conductors
Strips according to EN 50164-2, for use in earth-termination and lightning protection systems as well as for ring equipotential bonding.
Strips
Steel strip
zinc coating = 70 m average (approx. 500 g/m2)
Part No. Width Thickness Cross section Material Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Coil weight Packing unit
mm mm mm2
kA kg m
approx. 40 100
Copper strip
Part No. Width Thickness Cross section Material Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Coil weight Packing unit
mm mm mm2
kA kg m
Part No. Width Thickness Cross section Material Characteristics/Material No. Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Coil weight Packing unit
mm mm mm2
860 325 30 3.5 105 StSt (V4A) 1.4571 EN 50164-2 3.9 approx. 21 25
860 335 30 3.5 105 StSt (V4A) 1.4571 EN 50164-2 3.9 approx. 50 60
kA kg m
approx. 21 25
approx. 50 60
www.dehn.de
15
Conductors
Terminal lugs straightened, made of corrosion-resistant stainless steel StSt (V4A), for connecting down conductors to the earth-termination system Other dimensions available on request
10 l1
Round wires
Part No. Material Length (l1) Dimension Cross section Material No. Standard Packing unit
mm mm mm2
pc(s)
Flat strips
30
t = 3.5
l1
Part No. Material Length (l1) Dimension Cross section Material No. Standard Packing unit
mm mm mm2
pc(s)
12.5
70
32
38
35
49
mm mm mm pc(s)
16
www.dehn.de
Conductors
Cables for use in lightning protection and earth-termination systems
Cables
Aluminium cable
Al must neither be installed directly (without distance) on, in or under plaster, mortar or concrete nor in soil.
Part No. Cross section mm2 Cable structure qty x wire mm Material Standard Outer mm Coil weight kg Packing unit m 840 050 50 19 x 1.8 Al EN 50164-2 9 approx. 13.5 kg 100
Steel cable
Part No. Cross section mm2 Cable structure qty x wire mm Material Outer mm Coil weight kg Packing unit m
Copper cable
Part No. Cross section mm2 Cable structure qty x wire mm Material Standard Outer mm Short-circuit current(50 Hz) (1 s; ) 300 C) kA Coil weight kg Packing unit m Versorgungs-Nr.
approx. 44 100
approx. 30 50
approx. 60 100
Part No. Cross section mm2 Cable structure qty x wire mm Material Standard Outer mm Short-circuit current(50 Hz) (1 s; ) 300 C) kA Coil weight kg Packing unit m
832 839 50 19 x 1,8 Cu/gal Sn EN 50164-2 9 (max. 150 C) 7.2 approx. 44 100
832 292 70 19 x 2.1 Cu/gal Sn EN 50164-2 10.5 (max. 150 C) 10.1 approx. 60 100
832 295 95 19 x 2.5 Cu/gal Sn EN 50164-2 12.5 (max. 150 C) 13.8 approx. 42 49
832 320 120 19 x 2.8 Cu/gal Sn EN 50164-2 14.5 (max. 150 C) 17.3 approx. 53 50
Part No. Cross section mm2 Cable structure qty x wire mm Material Outer mm Coil weight kg Packing unit m
www.dehn.de
850 008 27 [7x] 19 x ca. 0.59 StSt (V4A) 8 approx. 23.5 100
850 010 42 [7x] 19 x ca. 0.68 StSt (V4A) 10 approx. 39.5 100 17
18
www.dehn.de
Air-termination Rods
Due to the wind load, air-termination rods of more than 2500 mm in free length, established on concrete base need to be additionally fixed e.g. by DEHNiso spacers.
Part No. Total length (l1) Material Standard Diameter Packing unit
mm
mm pc(s)
Part No. Total length (l1) Material Standard Diameter Packing unit
mm
mm pc(s)
Part No. Total length (l1) Material Standard Diameter Type Packing unit
mm
mm pc(s)
16
45
1000 l1
Part No. Total length (l1) Material Standard Diameter Type Packing unit
www.dehn.de
mm
mm pc(s)
10
Air-termination Rods
Tubular air-termination rods with tapering
16
1000 l1
Part No. Total length (l1) Material Standard Diameter Wall thickness of pipe (t1) Packing unit Part No. Total length (l1) Material Standard Diameter Wall thickness of pipe (t1) Packing unit
mm
mm mm pc(s) mm
103 410 1500 AlMgSi EN 50164-2 16/10 2.5 10 103 480 5000 AlMgSi EN 50164-2 16/10 2.5 10
103 420 2000 AlMgSi EN 50164-2 16/10 2.5 10 103 419 1500 StSt EN 50164-2 16/10 3 10
t1
103 430 2500 AlMgSi EN 50164-2 16/10 2.5 10 103 429 2000 StSt EN 50164-2 16/10 3 10
103 440 3000 AlMgSi EN 50164-2 16/10 2.5 10 103 439 2500 StSt EN 50164-2 16/10 3 10
103 450 3500 AlMgSi EN 50164-2 16/10 2.5 10 103 449 3000 StSt EN 50164-2 16/10 3 10
10
103 460 4000 AlMgSi EN 50164-2 16/10 2.5 10 103 417 1500 Cu EN 50164-2 16/10 2.5 10
mm mm pc(s)
te
s ted
Part No. Total length (l1) Material Standard Diameter Terminal clamping range Packing unit
mm
mm mm pc(s)
Part No. Total length (l1) Material Standard Diameter Packing unit
mm
mm pc(s)
s ted
Using the connecting sleeve requires an additional fixing of the air-termination rod above the sleeve.
Part No. Material Clamping range Rd / Rd Screw Material of screw Outer Standard Packing unit 385 216 Al 16 / 16 di M8x12 StSt 28 EN 50164-1 10
www.dehn.de
mm mm mm pc(s)
18
17
42 90
42
28
20
Concrete Bases
337
325
114 80 40 depth 40 mm 41
26
28
Part No. Weight Support Diameter Material Material of wedge Packing unit
kg mm
pc(s)
347
337 325
324
114 80 40 depth 40 mm 41
26
28
Part No. Weight Support Diameter Material Material of wedge Packing unit
kg mm
pc(s)
www.dehn.de
Concrete Bases
Weight 8.5 kg for wedge mounting
for air-termination rods 10 mm, length 1000 mm or DEHNiso spacers 16 mm, length up to 675 mm (distance 1 m)
18 60 90
240
Part No. Weight Support Diameter Material Material of wedge Packing unit
kg mm
pc(s)
102 075 8.5 wedge 10/16 mm 240 concrete (C45/55) StSt 120
230
26
26
21 30 26
337
325
Part No. Weight Support Diameter Material Material of adapter Packing unit
kg mm
pc(s)
114 80 40 depth 40 mm 41
Part No. Weight Support Diameter Material Material of adapter Packing unit
kg mm
pc(s)
102 003 8.5 thread M16 240 concrete (C45/55) plastic 120
230
26
22
26
21 30 29
www.dehn.de
Support Plates
Large design
for concrete bases (Part No. 102 010, 102 002) weight 17 kg
10
360
370
3.5
Part No. Diameter (d1) Diameter (d2) Material Colour Packing unit
mm mm
pc(s)
Small design
for concrete bases (Part No. 102 075, 102 003) weight 8.5 kg
10
280
270
3.5
Part No. Diameter (d1) Diameter (d2) Material Colour Packing unit
mm mm
pc(s)
www.dehn.de
23
1000
10
24
120-240
Part No. Material of air-termination rod Length mm Diameter mm Material of clip Clamping range mm Standard Packing unit pc(s)
20
Combinable with air-termination rods 16/10 mm tapered, e.g. length 2000 mm (Part No. 103 221) or length 2500 mm (Part No. 103 231). The air-termination rods have to be ordered separately.
10
The air-termination rods are dimensioned for wind velocities up to 145 km/h (wind load zone II). Components: pipe 40x5 mm with threaded head M16 lock nut M16 earthing terminal St/tZn with KS connector made of StSt Fixing e.g. at a wall shall be implemented with Part No. 105 140, fixing at pipes with Part No. 105 354. The maximum free length of the air-termination rod is measured from the tip to the upper support (fixing point). For stability reasons, the middle support (3 fixings) shall be mounted as closely as possible to the top support. The distance must not be more than 15 cm. At the bottom the support (fixing point) shall be installed in a height of ) 15 cm.
l2
16
M16
l1
103 40
s ted
40
Part No. Length of pipe (l1) mm Max. free length with air-term. rod 2000/2500 mm (l2) mm Clamping length with air-term. rod 2000/2500 mm (l3) mm Quantity of fixings Material air-termination rod Standard Packing unit pc(s) 24
125
te
l3
Tripods for air-termination rods to be established with concrete base (weight 17 kg) adjustable to the roof inclination up to max. 10 by means of threaded rod M16 dimensioned for a wind velocity up to 145 km/h (wind load zone II) The air-termination rods D40/supporting tubes or the stackable concrete base (Part No. 102 010) and the support plate (Part No. 102 050) have to be ordered separately. The air-termination rods D40 can be set up detached in the tripod without additional fixing. Possible combinations for the tripod radius 590 mm: Height 4000 mm: Height 4500 mm: Height 5000 mm: Height 5500 mm: Part No. 105 202 + 103 221 Part No. 105 202 + 103 231 Part No. 105 203 + 103 221 Part No. 105 203 + 103 231
More details in installation instructions No. 1690 Applications in other wind load zones/wind velocities available upon request
Hinged design
for air-termination rods D40 up to a height of 5500 mm, DEHNiso Combi supporting tubes with a length of 3200 mm with air-termination spike/rod (nine concrete bases), or HVI conductor laid in/at the supporting tube with a length of 3200 mm (nine concrete bases)
600
54
1410
R5 90
Part No. Material of tripod Support Radius Required space for tripod Height quantity of contrete bases Packing unit
1250
mm mm mm
pc(s)
45
Separable design
for air-termination rods D40 up to a height of 8000 mm, DEHNiso Combi supporting tubes with a length of 4700 mm with air-termination spike (nine concrete bases), or HVI conductor laid in/at the supporting tube with a length of 4700 mm (nine concrete bases)
2000
54
R1
2340
15
Part No. Material of tripod Support Radius Required space for tripod Height quantity of contrete bases Packing unit
mm mm mm
pc(s)
www.dehn.de
2070
152
4 0
2.5 64
Part No. Material Fixing Wall distance Clamping range of air-termination rod Material of screw Packing unit
mm mm mm pc(s)
5.1
100
75
25
40
50
50 320
11
20
122
5.1
20
11
Part No. Material Fixing Wall distance Clamping range of air-termination rod Material of screw Packing unit
mm mm mm pc(s)
105 342 StSt [8x] 5.1 / [4x] 7x10 / [2x] 11x20 46 40-50 StSt 1
40
170
10
30
46
20
35
28
26
28 3
Part No. Material Clamping range of pipe mm Clamping range of air-termination rod mm Material of screw Packing unit pc(s)
20
94 122
26
40
26
20
40
11 15
40 -50
www.dehn.de
14
400-700 349 40
4 11
30x3 40x4
0/ 50 4
40 4 120
12
3 400
Part No. Material Fixing Wall distance Clamping range of air-termination rod Material of screw Packing unit
mm mm mm pc(s)
122 94
28 3 26
49
28 120
0.3
2.5 17
1100
Part No. Material Clamping range of pipe mm Clamping range of air-termination rod mm Material of screw Packing unit pc(s)
23
20
www.dehn.de
27
94
1000
2000 10
16
1000
22
16 5
40 5 55
230-520
230-520
te
s ted
59 5
te
s ted
59 5
1 1
500/1000
2000/2500
Part No. Total length Length (16/10 mm) Profile distance Fixing Material of air-termination rod Material of braces Material of nut/washer Standard Packing unit
mm mm mm mm
pc(s)
Type with a length of 1500 mm (Part No. 103 211) available upon request.
28
Part No. Total length Length (16/10 mm) Length (22 mm) Profile distance Fixing Material of air-term. rod Material of braces Material of nut/washer Standard Packing unit
mm mm mm mm mm
pc(s)
123 425 2500 2000 500 230-520 [4x] 11 Al StSt StSt EN 50164-2 1
123 430 3000 2000 1000 230-520 [4x] 11 Al StSt StSt EN 50164-2 1
123 435 3500 2500 1000 230-520 [4x] 11 Al StSt StSt EN 50164-2 1
www.dehn.de
1 1
30
30
Air-termination rod for protecting roof superstructures, domelights etc. The air-termination rod will be set into the profile valley of the sheeting. Due to the variable base frame it is adjustable to any trapezoidal profile. The special support of the air-termination rod allows to compensate roof inclinations up to 10.
10
110
Part No. Total length Length (10 mm) Length (16 mm) Profile distance Material of air-termination rod Material of bases Material of braces Standard Packing unit
600
30
mm mm mm mm
pc(s)
Type with a length of 1500 mm (with Part No. 103 211) upon request
www.dehn.de
29
25 17 15
3 0.3
28 120 64
2.5 17
te
s ted
25
1100
Part No. Material of head/strip Clamping range of square hollow profile Clamping range of pipe Connection Rd Dimension of strip (l x w x d) Screw Material of screw Standard Packing unit
mm mm mm mm mm
pc(s)
540 105 StSt 40x60 up to 70x70 50-300 16 1100x25x0.3 di M8x20 StSt EN 50164-1 1
66
86
25 40 17 20 7 20 19
Part No. Material of brace Material of bolt Fixing Length of bolt Conductor holder support Rd Material of screw/nut Screw Packing unit
mm mm mm mm pc(s)
30
40
www.dehn.de
23
Air-termination spike with two saddle clamps (Part No. 365 031)
clamping range of the saddle clamps 0.7-8 mm
10
10
500
500
55
55
6 47
47
20
mm mm pc(s)
mm mm pc(s)
www.dehn.de
31
25
Part No. Inclination Material of support Clamping range Material of bolt Type of screw Material of screw Packing unit
95
mm mm pc(s)
Air-termination Caps
Air-termination caps to be attached ontop of the air-termination conductors
157
16
11
29
29
10
15
14
mm mm mm pc(s)
mm mm mm pc(s)
Air-termination Stud
Air-termination stud for use in air-termination systems installed according to the mesh net method, for walkable and drivable flat roofs, e.g. parcking decks The air-termination stud and the conductors can either be installed in concrete or in the joints of the deck slabs. More details in installation instructions No.1505
80
70-88
35
R5 9
2.5
R5 40 40
Part No. Material of clamp Material of stud Connection Rd Standard Installation depth Levelling range Packing unit 32
mm mm mm pc(s)
2.5
Roof Bushings
97
65
72
2.5
54
25
59
27
15
0
48
mm mm mm pc(s)
70
40
7.5
mm
mm mm pc(s)
48
44
Zone I II III IV
Wind force
Figure 1: Survey of wind load zones in Germany with the respective values of dynamic pressure and maximum wind velocity
The components are standardized and designed for wind velocities up to 145 km/h and a building height up to 40 m. Other factors of influence such as building height of more than 40 m ground level above 600 m sea level (normal zero) dynamic pressure natural oscillation safety coefficients ice accretion are to be taken into regard. Air-termination rod 1.5 m 2.0 m 2.5 m 3.0 m on request on request on request
Legend: The particulars apply for all tapered air-termination rods. The spacer is recommended to be mounted in the mid of the airtermination rod. 1x concrete block (weight 8.5 kg) 1x concrete block (weight 17 kg) 2x concrete block stackered (weight 34 kg) 1x concrete block (weight 17 kg) with spacer made of GRP 34 Part No. 102 075 Part No. 102 010 Part No. 102 010
Following specifications about ring conductor height (Al round wire 8 mm), distance and type or quantity of concrete blocks are referring to wind load zone II. Zone II Zone III Zone IV Height of ring conductor 675 mm 1000 mm 1500 mm Distance of concrete bases Middle / Middle 800 mm 1200 mm 1200 mm
Zone I
1000
The concrete base (Part No. 102 075 or 102 010) and the support plate (Part No. 102 060 or 102 050) have to be ordered separately. Air-termination rod Part No. 105 425 Part No. 105 430
10
Concrete base
Support plate
3x Part No. 102 075 3x Part No. 102 060 3x Part No. 102 010 3x Part No. 102 050 3x Part No. 102 010 3x Part No. 102 050
l2
Components: pipe 22x4 mm air-termination rod, tapered 16/10 mm terminal clamp (rod clamp) for Rd 8-10 mm tripod for wedge mounting concrete base More details in installation instructions No. 1712
16
22
l1
16
te
s ted
R25
Part No. Height Length (22x4) (l1) Length (16/10) (l2) Radius Space required for tripod (l x w) Quantity of bases Material of air-termination rod Material of tripod Standard Packing unit
mm mm mm mm mm
pc(s)
105 425 2500 500 2000 250 620x670 3 of 8.5 kg each Al St/tZn EN 50164-(1+2) 1
105 430 3000 1000 2000 250 750x810 3 of 17 kg each Al St/tZn EN 50164-(1+2) 1
105 435 3500 1000 2500 250 750x810 3 of 17 kg each Al St/tZn EN 50164-(1+2) 1
www.dehn.de
35
l2
1000
10
16
40
te
Self-supporting air-termination rods with hinged tripod to protect larger roof superstructures and adjustment to the roof pitch up to max. 10 The air-termination rods are dimensioned for wind velocities up to 145 km/h (wind load zone II). The stackable concrete base (Part No. 102 010) and the support plate (Part No. 102 050) have to be ordered separately. Components: pipe 40 x 5 mm air-termination rod tapered 16/10 mm terminal clamp for Rd 6-10 mm tripod for wedge mounting concrete bases More details in installation instructions No. 1436
s ted
0 R56
1340
Part No. Height Length (40x5) (l1) Length (16/10) (l2) Radius Space required for tripod (l x w) Quantity of concrete bases Material of tripod Material of air-termination rod Standard Packing unit
mm mm mm mm mm
pc(s)
105 400 4000 2000 2000 560 1180x1320 3 of 17 kg each St/tZn Al EN 50164-(1+2) 1
105 450 4500 2000 2500 560 1180x1320 3 of 17 kg each St/tZn Al EN 50164-(1+2) 1
105 500 5000 3000 2000 560 1180x1320 6 of 17 kg each St/tZn Al EN 50164-(1+2) 1
1210
l1
105 550 5500 3000 2500 560 1180x1320 6 of 17 kg each St/tZn Al EN 50164-(1+2) 1
36
www.dehn.de
1000
10 l2
16
40
l1
10
2770
2530
te
s ted
R1
43
2850
Part No. Height Length (40x5) (l1) Length (16/10) (l2) Radius Space required for tripod (l x w) Quantity of concrete bases Material of tripod Material of air-termination rod Standard Packing unit
mm mm mm mm mm
pc(s)
105 600 6000 4000 2000 1435 2490x2830 6 of 17 kg each St/tZn Al EN 50164-(1+2) 1
105 650 6500 4000 2500 1435 2490x2830 6 of 17 kg each St/tZn Al EN 50164-(1+2) 1
105 700 7000 5000 2000 1435 2490x2830 6 of 17 kg each St/tZn Al EN 50164-(1+2) 1
105 750 7500 5000 2500 1435 2490x2830 6 of 17 kg each St/tZn Al EN 50164-(1+2) 1
105 800 8000 6000 2000 1435 2490x2830 9 of 17 kg each St/tZn Al EN 50164-(1+2) 1
105 850 8500 6000 2500 1435 2490x2830 9 of 17 kg each St/tZn Al EN 50164-(1+2) 1
www.dehn.de
37
pipe 100x5 mm, length approx. 4000 mm pipe 90x3 mm, length approx. 2000 mm pipe 80x3 mm + 70x3 mm, length approx. 2000 mm each opt. pipe 40x5 mm, length approx. 2000 mm air-termination rod Al terminal clamp for Rd 6-10 mm tripod for wedge mounting concrete bases including StSt braces 20x20x2 mm
free height 14 m
1000 10
2000
1000
4000
free height 12 m
10
20
40
2000
16
2000
2000
70 4000 14000
70
4000
80
80
12000
2000
2000
90
90
100
100
4000
2300
4000
5640
00 0
5640
R3 00 0
te
R3
s ted
4920
R1400
50 R7
R1800
4920
R1400
R7
50
R1800
Part No. Height Air-termination rod ( length) Radius Space required for tripod Quantity of concrete bases Material of tripod Material of air-termination rod Standard Roof load Packing unit 38
mm mm mm mm
kg pc(s)
105 912 12000 16/10-2000 3000 4920x5640 21 of 17 kg each St/tZn Al EN 50164-(1+2) approx. 460 1
Part No. Height Air-termination rod ( length) Radius Space required for tripod Quantity of concrete bases Material of tripod Material of air-termination rod Standard Roof load Packing unit
mm mm mm mm
kg pc(s)
105 914 14000 20/10-2000 3000 4920x5640 24 of 17 kg each St/tZn Al EN 50164-(1+2) approx. 515 1
www.dehn.de
2300
Air-termination mast to protect special facilities e.g. biogas plants or free-field PV installation plants against direct lightning strike The masts will be established with screw foundation. Excavation or foundation works are not necessary. The screw foundation will just be screwed into the ground and fixed additionally with earth rods. Three earth rods 20 mm with a length of 1500 mm (Part No. 620 151) each are necessary for the screw foundation. These have to be ordered separately. The masts are designed for wind velocities up to 145 km/h (wind load zone II). These calculations are based on an applied pressure of 0.02 kN/cm2 of natural ground (e.g. loam, sand, medium tight gravel). Components: air-termination mast out of St/tZn and Al, tapered 70/60/40 mm air-termination rod out of Al 16/10 mm, length 1 or 2 m with thread M16 screw foundation out of St/tZn, length 800 mm with braces of length 530 mm and M10 locking screws with lock nut earthing terminal lug with boring 11 mm Advantages: easy erection due to tapered design out of St/tZn and aluminium if necessary, the air-termination mast can simply be removed from the screw foundation and put down
d1
40
l1
60 l2 1700
l3
l4
70
te
s ted
11 200
R53 0
Part No. Material Height above floor (l1) Length of pipe 70 mm Length of pipe 60 mm (l2) Length of pipe 40 mm (l3) Air-termination rod (d1) (l4) Standard Packing unit
www.dehn.de
mm mm mm mm mm pc(s)
103 122 St/tZn / Al 7000 1700 2000 2000 16/10 / 2000 EN 50164-(1+2) 1
103 124 St/tZn / Al 9000 1700 4000 2000 16/10 / 2000 EN 50164-(1+2) 1
800
103 126 St/tZn / Al 11000 1700 6000 2000 16/10 / 2000 EN 50164-(1+2) 1 39
Telescopic Lightning Protection Mast in Bucket or Concrete Foundation Isolated Lightning Protection
10
Air-termination masts to protect special facilities, e.g. biogas plants, free-field PV installation plants, Ex systems, ammunition dumps etc. against direct lightning strike This air-termination mast system turns whole systems/areas into strike protected areas (lightning protection zone 0B) without a horizontal airtermination system (spanning of cables) having to be installed. The separation distance s according to EN 62305-3 between the air-termination mast and the object to be protected has to be kept.
20
l2 42
The masts will be set up with bucket foundation (pre-fabricated element) or an on-site concrete foundation with foundation basket (to be ordered separately). For details on the locking system, the foundation and installation see installation instructions No. 1729. The masts are dimensioned for wind velocities up to 162 km/h (wind load zone III). Advantages of the air-termination mast system: excavation works can be completely done in advance installation on (prefabricated) bucket foundation requires little onsite efforts or installation on concrete foundation on site with foundation basket (time of concrete hardening has to be taken into account for scheduling and installation) type with flange plate for quick mounting easy adjustment by threaded bolts M24 detailed installation instructions statical calculations (upon request) Components: air-termination rod St/tZn 42/20/10 mm length 2400 or 5400 mm with thread M20 and lock nut conic mast segments flange plate with terminal lug and bore 12 mm for earth connection (of round conductor 10 mm e.g. with KS connector Part No. 301 019) max. transport length 6 m
l1
565
Part No. Material Height above floor (l1) m Mast segments Length of air-termination rod (l2) mm Dimension of flange plate mm Type of flange plate mm Concrete foundation on-site (a x b x c) Standard Weight Packing unit 40
103 013 St/tZn 13.35 2 2400 400x400 4x28 for 4xM24 (300x300) 1400x1400x900 EN 50164-(1+2) approx. 228 1
103 016 St/tZn 16.35 2 5400 400x400 4x28 for 4xM24 (300x300) 1400x1400x900 EN 50164-(1+2) approx. 230 1
103 019 St/tZn 19.35 3 5400 400x400 4x28 for 4xM24 (300x300) 1600x1600x900 EN 50164-(1+2) approx. 310 1
103 022 St/tZn 22.35 4 5400 565x565 8x28 for 8xM24 (490x490) 1800x1800x900 EN 50164-(1+2) approx. 450 1
103 025 St/tZn 24.85 5 5400 565x565 8x28 for 8xM24 (490x490) 2000x2000x900 EN 50164-(1+2) approx. 550 1
www.dehn.de
mm kg pc(s)
Bucket foundations as pre-fabricated components for easy erection of the telescopic lightning protection masts No need of on-site concreting. More details in installation instruction No. 1729
850
140
M24
Type KFU I
for masts with a height above floor of 13.35 to 19.35 m (Part No. 103 013 / 103 016 / 103 019) flange plate 400x400 mm
1800
2000
300
300
transport loop
Part No. Material Dimension (l x b x h) Weight Type of threaded bolts Packing unit
mm t mm pc(s)
1010
140
M24
Type KFU II
for masts with a height above floor of 22.35 and 24.85 m (Part No. 103 022 + 103 025) flange plate 565x565 mm
2400
490
Part No. Material Dimension (l x b x h) Weight Type of threaded bolts Packing unit
mm t mm pc(s)
www.dehn.de
41
Small design
for masts with a height above floor of 13.35 m up to 19.35 m (Part No. 103 013 / 103 016 / 103 019) flange plate 400x400 mm
Large design
for masts with a height above floor of 22.35 m + 24.85 m (Part No. 103 022 + 103 025) flange plate 565x565 mm
300
472
662 245 662
324
870
mm mm pc(s)
mm mm pc(s)
42
490
870
www.dehn.de
DEHNiso Spacers
Elevated air-termination system with spacers and concrete bases in the range of the electrical installation on the roof
Variable range of supports for conductors and air-termination rods for keeping the separation distance according to EN 62305-3 Spacer bar made of glass-fibre reinforced plastic (GRP), 16 mm, UV-stabilised, light grey colour, permanent temperature range -50 to +100 C Material factor km = 0.7 is used to determine the separation distance (length of spacer bar) A spacer bar length of 1000 mm is equivalent to a clearance of 700 mm Design providing other spacer lengths available on request
20
40 20
23
170
16
R8
5.1
10
11
45
l2 l1
45
35
20
Part No. CH Rd Material of CH Length (l1) Insulating distance (l2) Fixing Material of plate Material of fixing bushing Packing unit
10
mm mm mm mm
pc(s)
106 115 16 StSt 530 445 [8x] 5,1 / [4x] 7x10 / [2x] 11x20 StSt ZDC 1
106 120 16 StSt 690 605 [8x] 5,1 / [4x] 7x10 / [2x] 11x20 StSt ZDC 1
106 123 16 StSt 1030 945 [8x] 5,1 / [4x] 7x10 / [2x] 11x20 StSt ZDC 1
www.dehn.de
43
DEHNiso Spacers
with conductor holder and fixing plate
fixed conductor leading
3 10
20 40
20
170
23
16
R5
2 5.1 45 10 l2 l1 35 20 7 10
Part No. CH Rd Material of CH Length (l1) Insulating distance (l2) Fixing Material of plate Material of fixing bush Packing unit
mm mm mm mm
pc(s)
106 090 7-10 StSt 530 445 [8x] 5.1 / [4x] 7x10 / [2x] 11x20 StSt ZDC 1
45
106 100 7-10 StSt 690 605 [8x] 5.1 / [4x] 7x10 / [2x] 11x20 StSt ZDC 1
11
106 105 7-10 StSt 1030 945 [8x] 5.1 / [4x] 7x10 / [2x] 11x20 StSt ZDC 1
20 40
20
20
170
5.1
23
10
11
45
16
l2 l1
45
35
20
Part No. CH Rd Material of CH Length (l1) Insulating distance (l2) Fixing Material of plate Material of fixing bush Packing unit
mm mm mm mm
pc(s)
106 110 8 StSt 690 605 [8x] 5.1 / [4x] 7x10 / [2x] 11x20 StSt ZDC 1
10
R8
23
122
10 3 45 l2 l1 2
40
20
26
Part No. CH Rd Material of CH Length (l1) Insulating distance (l2) Clamping range of pipe Material of fixing bush Material of fixing element Packing unit 44
mm mm mm mm
pc(s)
106 225 16 StSt 530 445 40-60 (11/4 - 2") ZDC StSt 1
106 226 16 StSt 690 605 40-60 (11/4 - 2") ZDC StSt 1
16
94
28
106 228 16 StSt 1030 945 40-60 (11/4 - 2") ZDC StSt 1
www.dehn.de
DEHNiso Spacers
17
0.3 x 1000 45
28
10 l2 l1 2
Part No. CH Rd Material of CH Length (l1) Insulating distance (l2) Clamping range of pipe Material of fixing bush Material of fixing element Packing unit
mm mm mm mm
pc(s)
16
R5
16
te
s ted
l2
l1
Part No. CH Rd Material of CH Length (l1) Insulating distance (l2) Material of fixing bush Packing unit
mm mm mm pc(s)
Part No. CH Rd Material of CH Length (l1) Insulating distance (l2) Material of fixing bush Packing unit
l2
l1
mm mm mm pc(s)
C mm mm pc(s)
Tensioning Strap
Part No. Material Dimension of strap (l x w x d) Length Packing unit
www.dehn.de
mm m pc(s)
DEHNiso Spacers
Single Parts for DEHNiso Spacers
27 16.5
M8 28
mm mm pc(s)
27 16.5 10
Fixing Plate
3
30
basic plate for the spacer or the spacer bar (16 mm) to be fixed e.g. at construction components
35 20
45
170 35 20 7 10 5.1 11
35 45
35 45
Part No. Material of fixing plate Material of fixing bush Fixing Dimension (l x w x d) Screw Material of screw Packing unit
mm mm mm pc(s)
106 127 StSt ZDC [8x] 5.1 / [4x] 7x10 / [2x] 11x20 170x40x3 di M8x12 StSt 20
20
40
R5 2
30
47
16.5 38
10
mm
mm pc(s)
58
28
20
R8.5 2 2
30
16.5 38
10
mm
mm pc(s)
58
28
20
R5
16
l2 2 l1
R8.5
16
l2 2 l1
46
DEHNiso Spacers
Single Parts for DEHNiso Spacers
mm mm pc(s)
16.5
15 M10
M10
16
30
46
25
Fixing Bracket
with fixing bolt for spacer bar (16 mm)
Part No. Material Angle Fixing Dimension (l x w x h) Packing unit 106 311 StSt 90 [4x] 5.1 / [2x] 6.5 / [2x] 11x20 110x60x30 20
142 46 10 34 11
mm mm pc(s)
16
5.1 33 42
6.5
20
11 15
Frixing Bracket
for DEHNiso spacer with bore 11 mm
Part No. Material Angle Fixing Dimension (l x w x h) Packing unit 106 310 StSt 90 [4x] 5.1 / [2x] 6.5 / [2x] 11x20 110x60x30 20
3 110 46 10 34 11 60
30
mm mm pc(s)
16
5.1 33 42
6.5
mm mm pc(s)
106 315 StSt 45 [4x] 5.1 / [2x] 6.5 / [2x] 11x20 104x54x30 20
54
Fixing Bracket
20
15
11
45
104 10 46 34 11
30
16
5.1 33 42
6.5
20
54 15
Corner Bracket
with fixing bolt for spacer (16 mm)
Part No. Material Angle Fixing Dimension (l x w x h) Packing unit 106 316 StSt 90 [8x] 5.1 / [4x] 6.5 / [4x] 11x20 132x155x30 20
4 10 3
mm mm pc(s)
90
25
28
mm mm pc(s)
106 352 StSt 40-60 (11/4 - 2'') ZDC e M8x50 / di M8x12 StSt 10
94 122
16.5
40
20
26
Pipe Clamp
45
10
30
47
DEHNiso Spacers
Single Parts for DEHNiso Spacers
45 10
28 3
mm mm pc(s)
130 158
16.5
40
31
36
10
45
50
50
16.5
mm mm pc(s)
30
25
16.5
fixing by tensioning straps up to 30 mm (e.g. tensioning strap 25x0.3 mm with grip head Part No. 106323) with fixing bolt
Part No. Material of clip Material of bolt Width of slot (l x w) Fixing Packing unit 106 321 StSt Al 32x6 [2x] 11 10
17 13 24 70
42 32
11 30 44
33
mm mm pc(s)
30
10
45
28 120 16.5
mm mm pc(s)
3
40
for fixing (tensioning) of clip (Part No. 106 321) or attachment with fixing bush (Part No. 106 322) at different pipes
Part No. Material of head/strap Clamping range Dimension of strap (l x w x d) Screw Material of screw Packing unit 106 323 StSt 50-300 1100x25x0.3 di M8x20 StSt 10
2.5 17
mm mm mm pc(s)
25
0.3
40
23
1100
2.5 17
26 35
Part No. Material of head For strap (w x d) Screw Material of screw Packing unit
mm mm pc(s)
48
23
DEHNiso Spacers
Single Parts for DEHNiso Spacers
mm mm pc(s)
R8.5
25
10 40 73
60 3
for supporting tubes DEHNiso Combi (50 mm) with 2 fixing bolts for spacer bar (16 mm)
Part No. Material Clamping range Rd Screw Material of screw/nut Packing unit 106 326 StSt 50/16 di M8x16 StSt 10
mm mm pc(s)
16
Fixing Adapter
for saddle and terminal clamps, angled
Part No. Material of bar Bar Angle Material of bush Packing unit 106 341 StSt 8 90 ZDC 20
25
10 40 100
25
88 10 58
mm
pc(s)
16.5
45
Fixing Adapter
for saddle and terminal clamps, angled
Part No. Material of bar Bar Angle Material of bush Packing unit 106 342 StSt 8 130 ZDC 20
10 8 16.5 45
130
130 10 100 16.5
mm
pc(s)
Fixing Adapter
for saddle and terminal clamps, straight
Part No. Material of bar Bar Angle Material of bush Packing unit 106 340 StSt 8 0 ZDC 20
mm
20
pc(s)
45
MV Clamp
especially for the fixing of air-termination rods at the spacer bar without fixing bush
Part No. Material Conductor holder support Rd Conductor leading Screw Material of screw Packing unit 393 069 StSt 16/16 fixed e M10x50 StSt 50
16 3
R8
R8
mm mm pc(s)
44
50
mm mm mm pc(s)
R8 22
40
16
20
5 19 30 53 75
10
25
90
49
Crimped design
10
20
20
16
16
l1
Part No. Total length (l1) Insulating distance (l2) Material of air-termination spike/bushing Material of spacer Packing unit
mm mm
l2
pc(s)
Part No. Total length (l1) Insulating distance (l2) Material of air-termination spike/bushing Material of spacer Packing unit
mm mm
l2
pc(s)
50
www.dehn.de
Isolated Lightning Protection Accessories for Air-termination Rods GRP/Al Air-termination Spike with Lock Nut
for screwing
Part No. Material Diameter Length Thread Material of nut Standard Packing unit 101 001 Al 10 1000 M10 StSt EN 50164-2 1
1000
mm mm
pc(s)
10
30
M10
mm mm
pc(s)
1000
te
R5
s ted
40
70
te
s ted
mm mm
pc(s)
40
40
www.dehn.de
51
Spacer with concrete block and support plate, loose conductor leading
43
27
R4
22
10 l1 74 180
Part No. Conductor holder Rd Material of roof conductor holder Length (l1) Insulating clearance Total weight Packing unit 52
mm mm mm kg pc(s)
00
www.dehn.de
Isolated Lightning Protection Single Parts for DEHNiso Roof Conductor Holders Spacer Bar with Conductor Holder
loose conductor leading
Part No. Conductor holder support Rd Material of conductor holder Length (l1) Insulating clearance Packing unit mm mm mm pc(s) 253 315 8 plastic 220 280 24 253 325 8 plastic 420 360 24
22 43 27 R4
DEHNiso RoofConductorHolder
10
l1
18 R4
22
mm pc(s)
15
27
C mm mm pc(s)
Concrete Block
for stabilization of the base plate with attached spacer bar
Part No. Type Material Weight Dimension (l x w x h) Packing unit 253 301 square open form concrete (C35/45) 4.6 180x180x70 24
kg mm pc(s)
10
60
Support Plate
support plate with lock bush for the spacer bar (Part No. 253 315, 253 325) and as protection of the roofing sheets under the concrete block (Part No. 253 301)
Part No. Diameter Diameter of lock bush Height Material Colour Packing unit mm mm mm 253 300 300 10 60 plastic grey 24
00
pc(s)
12
180
5 6
70
22
29
www.dehn.de
53
Components for isolated air-termination systems (insulated) to protect larger roof superstructures, e.g. air-conditioning systems, recooling plants etc. For the separation distance to electrically conductive parts to be kept according to EN 62305-3 Tubes and spacers are made of glass-fibre reinforced plastic (GRP), are UV stabilized, of light grey colour and for a permanent temperature range of -50 to +100 C
1 1 1 1 1
1535 50
complete unit ready-to-install low own weight stable overall construction single-screw fixing clamps various bore patterns for different mounting requirements
3200
x 2500
4200
1030
Material factor km = 0.7 is applied to determine the separation distance (length of the spacer bar. A spacer bar of 1000 mm is equivalent to a clearance in air of 700 mm. The distance between supporting tube head and upper holder (fixing point) is considered as maximum free length. In case of an elevated spanning with aluminium cable (Part No. 840 050) distances of max. 10 m are allowed (mind the sagging). More details in installation instructions No. 1475
Part No. Total length Quantity of spacers Quantity of fixing brackets Length of supporting tube Max. free length Material of supporting tube Packing unit
50 1650
150
500
mm
mm mm pc(s)
54
DEHNiso-Combi Sets
two-piece, total height 7200 mm
(transport length 3200 mm) comprising 1x air-termination spike Al, L = 1000 mm (Part No. 105 071) 1x supporting tube GRP/Al, L = 6200 mm (Part No. 105 302) 3x wall fixing bracket StSt (Part No. 105 340) 3x spacer GRP/Al, L = 1030 mm (Part No. 106 331)
10
50
10
4200
1535
50
3200
x 3000
1030
1535
7200
1650
50
x 3000
1030
500
5700
1030
50 4700
3150
150
3000
500
1030
1030
50
150
Part No. Total length Quantity of spacers Quantity of fixing brackets Length of supporting tube Max. free length Material of supporting tube Packing unit
www.dehn.de
mm
mm mm pc(s)
Part No. Total length Quantity of spacers Quantity of fixing brackets Length of supporting tube Max. free length Material of supporting tube Packing unit
150
mm
mm mm pc(s)
DEHNiso-Combi Sets
Single Parts for DEHNiso Combi Sets
mm mm
pc(s)
1000
s ted
te
s ted
R5
70
mm mm
R5
40
40
40
pc(s)
for a separated (insulated) construction of air-termination systems with female thread for attachment of air-termination spike or MV clamp for spanning as well as for the HVI conductor to be fixed
1535
one-piece
50
60
50
60
M10
Part No. Material of supporting tube Length of supporting tube (l1) Outer diameter Transport length Length of insulating clearance Permanent temperature range Packing unit
M45
mm mm mm mm C pc(s)
l1 1650 / 3150
1560
28
50
for attachment of air-termination spike or MV clamp for spanning as well as for the HVI conductor to be fixed two-piece
Part No. Material of supporting tube Length of supporting tube Outer diameter Transport length Length of insulating clearance Permanent temperature range Packing unit 105 302 GRP / Al 6200 50 3200/3000 1535 -50 to +100 1
3200
60
60
M10 M8
3000
50
mm mm mm mm C pc(s)
1535
50
1625
one-piece with air-termination spike 10 mm, length 1000 mm, Al and lateral/horizontal air-termination spikes 8 mm, length 500 mm, StSt
Part No. Material of supporting tube Length of supporting tube Outer diameter Transport length Length of insulating clearance Permanent temperature range Packing unit 105 310 GRP / Al 3200 50 3200 1535 -50 to +100 1
www.dehn.de
50 1650
1000
mm mm mm mm C pc(s)
56
500
DEHNiso-Combi Sets
50
1000
mm mm mm mm C pc(s)
10
3200
16
60
50
Fixing Bracket
for the supporting tubes to be fixed at the structure to be protected or at the wall
Part No. Material Clamping range of supporting tube Wall/corner distance Dimension of fixing Fixing Material of screw Packing unit 105 340 StSt 50 80 320 [8x] 5.1 / [4x] 11x20 StSt 1
1615
2500
50
mm mm mm mm pc(s)
159
62
320 5.1 75
20
11 11 20 15
80 50 50 25
Fixing Bracket
for the supporting tubes to be fixed at the structure to be protected or at the wall
Part No. Material Clamping range of supporting tube Wall/corner distance Dimension of fixing Fixing Material of screw Packing unit 105 341 StSt 50 80 152 [8x] 5.1 / [4x] 11x20 StSt 1
50
mm mm mm mm pc(s)
157
103
80
122
60
Fixing Bracket
wall fixing bracket for vertical mounting for fixing of the supporting tubes or air-termination rods D40/D50
Part No. Material of bracket Fixing Clamping range of supporting tube Wall/corner distance Dimension of fixing Material of screw Packing unit 105 342 StSt [8x] 5,1 / [4x] 7x10 / [2x] 11x20 40-50 46 170 StSt 1
90
mm mm mm mm pc(s)
5.1
20
11 40
170
10
30
45
20
Fixing Bracket
wall fixing bracket with adjustment range of 400-700 mm for fixing of the supporting tubes or air-termination rods D40/D50
Part No. Material of bracket Clamping range of supporting tube Wall/corner distance Dimension of plate Fixing Profile Packing unit
www.dehn.de
35
40x4
30x3
/5 0
mm mm mm mm pc(s)
105 343 St/tZn / StSt 40-50 400-700 120x120x4 [4x] 12x25 40x40x4 / 30x30x3 1
40
400-700 349 40
14
4 11
40
105
2 15
120
12
40 3 400
4 0
57
94
-50 40
DEHNiso-Combi Sets
Single Parts for DEHNiso Combi Sets
28 120
0.3
2.5 17
Part No. Material of clip Clamping range of supporting tube mm Clamping range pipe mm Material of tensioning strap Material of screw Packing unit pc(s)
26
1100
23
29
28 120
2.5 17
1100
Part No. Material of clip Clamping range of supporting tube Clamping range pipe Material of tensioning strap Material of screw Length of spacer Material of spacer Packing unit
mm mm
mm pc(s)
30
26 0.3 23
3
56
with additional long spacer for holders of sector antennas to be adjusted at the mast
3
28 120
2.5 17
1100
Part No. Material of clip Clamping range of supporting tube Clamping range pipe Material of tensioning strap Material of screw Length of spacer Material of spacer Packing unit
mm mm
mm pc(s)
95
26 0.3
28
20
23
121
26
28 3
mm mm mm pc(s)
20
94 122
58
40
www.dehn.de
Isolated Lightning Protection Single Parts for DEHNiso Combi Sets Fixing Equipment for Railings
for pipes
Part No. Material Clamping range pipe Screw Material of screw Clamping range of supporting tube Packing unit 105 355 StSt 70-90 (21/4 - 3'') e M8x40 / e M8x70 StSt 40-50 5
31 3 94
DEHNiso-Combi Sets
28 26 36 28 130 158
Rd40-50 20 28 26 20-50/1120 50/60 60/70 88/98
mm mm
20
122
mm pc(s)
20x20 to 50x50 60x120 60x120 e M8x40 / e M8x40 / e M8x40 / di M8x70 di M8x150 di M8x150 StSt StSt StSt 40-50 5 40-50 5 40-50 5
mm pc(s)
40
Pipe Clamp
with fixing bush for spacer (16 mm) for pipes up to 60 mm
Part No. Material of clamp Clamping range pipe Material of bush Screw Material of screw/nut Packing unit 106 352 StSt 40-60 (11/4 - 2'') ZDC e M8x50 / di M8x12 StSt 10
3
45
10
28
mm mm pc(s)
94 122
16.5
Pipe Clamp
Part No. Material of clamp Clamping range pipe Material of bush Screw Material of screw/nut Packing unit 106 353 StSt 70-90 (21/4 - 3'') ZDC e M8x70 / di M8x12 StSt 10
3
45
10
40
20
28 130 158 31 16.5 40 36
mm mm pc(s)
26
www.dehn.de
59
DEHNiso-Combi Sets
Single Parts for DEHNiso Combi Sets
10
45
50
50
mm mm pc(s)
16.5
30
60 88
45
R2 5
16
10
3 51 215
Part No. Material Screw mm Material of screw Clamping range of supporting tube mm Material of fixing bush Packing unit pc(s)
100
28
80
2 45
R2 5
16
R5
10 2 l2
3 51 l1
Part No. Material of spacer Material of fixing element Material of conductor holder Conductor holder support Rd Height of conductor holder Total length (l1) Insulating clearance (l2) Clamping range of supporting tube Packing unit
mm mm mm mm mm pc(s)
100
28
80
16
1200
120
40/50
30
1330
R5 60
mm mm mm pc(s)
60
HVI Conductor
Isolated air-termination system for recooling plant with HVI conductor grey in a supporting tube
protective angle
according to EN 62305-3 Lightning Protection Part 3, Ta able 2
air-termination rod
AI L = 1000 mm Part No. 101 001
a a
s
connecting plate
Par a t No. 301 229
Parallel ducted HVI conductor with terminal clamp Part No. 301 329
EB connection element
Part No. 405 020
HVI Conductor I
earth-termination system
61
HVI Conductor
High-voltage resistant insulated down conductor for keeping the separation distance from electrically conductive parts according to EN 62305-3 Equivalent separation distance s ) 0.75 m (in air) or s ) 1.5 m (solid building material). Hence, depending on the protection class of the lightning protection system (LPS) one down conductor realizes the following maximum conductor lengths: LPS I LPS II LPS III/IV max. 9.40 m max. 12.50 m max. 18.75 m
10 23/25
The HVI conductor meets the requirements according to EN 50164-2. A processing temperature of * 0 C and a permanent temperature range (at fixed installation) of -30 C up to +70 C are to be minded. Minimum order length 4 m, conductor length to be indicated when ordering. Three types of HVI conductor are available: HVI conductor I for application to directly connect the air-termination system of the external lightning protection with the earth-termination system of the building. HVI conductor II for application e.g. to interconnect several system components to be protected via a common "isolated ring conductor" with the earth-termination system of the building. HVI conductor III with a firmly affixed sealing end and a sealing end to be implemented in situ for typical application in cases where the total conductor length can not be determined exactly when designing the installation. HVI conductor III can be used just like HVI conductor II. HVI conductors I and III may be shortened but not extended. More details in installation instructions No.1566. For being a customized product (customized conductor length) the conductor can not be returned.
Part No. Material of conductor Material of insulation Material of coating Colour of conductor Cross section of core Outer conductor Minimum order length (l1) Packing unit 819 020 Cu PE PVC black 19 20 4 1
20/23
l1
23/25
10
mm2 mm m pc(s)
62
49
www.dehn.de
HVI Conductor
HVI Conductor III
with one head piece, one connection element and two equipotential bonding connection elements. One equipotential bonding connection element and one connection element are loosely enclosed.
50 36 23/25 11 27 1450 l1 49 100 23/25 10
10 23/25
l1
20/23
23/25 100
49
20/23 40 10
10
Part No. Material of conductor Material of insulation Material of coating Colour of conductor Cross section of core Outer conductor Minimum order length (l1) Packing unit
50
mm2 mm m pc(s)
Part No. Material of conductor Material of insulation Material of coating Colour of conductor Cross section of core Outer conductor Minimum order length (l1) Packing unit
100
mm2 mm m pc(s)
www.dehn.de
63
HVI Conductor
Accessories for HVI Conductor Air-termination Spike with Lock Nut
for screwing on top of the supporting tube and for connecting the HVI conductor
Part No. Material Diameter Length Thread Material of nut Standard Ident number Packing unit 101 001 Al 10 1000 M10 StSt EN 50164-2 -1 101001/S StSt 10 1000 M10 StSt EN 50164-2 046334
mm mm
1000
60 M10
pc(s)
for a separated (insulated) construction of air-termination systems wtih female thread for attachment of air-termination spike or MV clamp for spanning as well as for the HVI conductor to be fixed
50
10
M10
one-piece
60
30
50
60 M10
Part No. Material of supporting tube Length of supporting tube (l1) Outer diameter Transport length Length of insulating clearance Permanent temperature range Packing unit
mm mm mm mm C pc(s)
l1
M45
1650 / 3150
1560
28
50
for attachment of air-termination spike or MV clamp for spanning as well as for the HVI conductor to be fixed two-piece
Part No. Material of supporting tube Length of supporting tube Outer diameter Transport length Length of insulating clearance Permanent temperature range Packing unit 105 302 GRP / Al 6200 50 3200/3000 1535 -50 to +100 1
3200
60
3000
50
60 M10
1625
mm mm mm mm C pc(s)
M8
1535
one-piece with air-termination spike 10 mm, length 1000 mm, Al and lateral/horizontal air-termination spikes 8 mm, length 500 mm, StSt
10
60
3200
M16
60
1560
50
50
10
Part No. Material of supporting tube Length of supporting tube Outer diameter Transport length Length of insulating clearance Permanent temperature range Packing unit
8
mm mm mm mm C pc(s)
1000
1650
1000
500
3185
16
60
50
2500
mm mm mm mm C pc(s)
64
1615
HVI Lightning Protection Accessories for HVI Conductor Fixing Clamp with Tensioning Strap
for the supporting tubes to be fixed at construction elements e.g. antenna masts
HVI Conductor
100
Part No. Material of clip Clamping range of supporting tube mm Clamping range pipe mm Material of tensioning strap Material of screw Packing unit pc(s)
50
1100
mm mm
30
28 120
mm pc(s)
mm mm
mm pc(s)
1100
Fixing Bracket
for the supporting tubes to be fixed at the structure to be protected or at the wall
Part No. Material Clamping range of supporting tube Wall/corner distance Dimension of fixing Fixing Material of screw Packing unit 105 340 StSt 50 80 320 [8x] 5.1 / [4x] 11x20 StSt 1
50
mm mm mm mm pc(s)
159
www.dehn.de
65
40
105
23
121
3
3
23
56
3
23
29
HVI Conductor
Accessories for HVI Conductor Terminal Plate
R5
te
for connecting the HVI conductor to the air-termination spike with two KS connectors
Part No. Material of terminal plate Material of KS connector Clamping range Rd Type Dimension (l x w x d) Standard Packing unit 301 229 StSt StST 2x 6-10 with spring washer 63x30x3 EN 50164-1 1
s ted
mm mm pc(s)
30
40 63
R8.5
R5.3
Terminal Plate
for connecting the HVI conductor to the air-termination rod 16 mm with KS screw
Part No. Material of terminal plate Material of KS connector Clamping range Rd Type Dimension (l x w x d) Standard Packing unit 301 239 StSt StSt 1x 16 / 1x 6-10 with spring washer 63x30x3 EN 50164-1 1
te
s ted
mm mm pc(s)
30
40 63
Terminal Plate
R5 3
for connecting two HVI conductors to the air-termination spike 10 mm with KS connector
Part No. Material of terminal plate Material of KS connector Clamping range Rd Type Dimension (l x w x d) Packing unit 301 329 StSt StSt 3x 6-10 with spring washer 103x30x3 1
te
s ted
30
mm mm pc(s)
40 80 103
Terminal Plate
R8 R5
for connecting two HVI conductors to the air-termination spike 16 mm with KS screw
Part No. Material of terminal plate Material of KS connector Clamping range Rd Type Dimension (l x w x d) Standard Packing unit 301 339 StSt StSt 1x 16 / 2x 6-10 with spring washer 103x30x3 EN 50164-1 1
te
s ted
mm mm pc(s)
30
40 80 103
EB Clamp
for connecting the special coating of the HVI conductor to the equipotential bonding
Part No. Material of clamp Clamping range Terminal cross section Material of cleat Type of screw Material of screw Packing unit 405 020 St/tZn 20 4-95 StSt dm M6x16 StST 25
R10
mm mm2 mm pc(s)
20
38 58
10
66
www.dehn.de
HVI Lightning Protection Accessories for HVI Conductor Conductor Holder for HVI Conductor
for wall mounting and for mounting in the sealing end range
Part No. Material of conductor holder Conductor holder support Rd Female thread Fixing bore Screw Packing unit 275 220 PA 20 M8 6.5 r M6x16 25 275 225 PA 23 M8 6.5 r M6x16 25
19 42 20
HVI Conductor
mm mm mm pc(s)
44 69
mm mm mm pc(s)
6.5
16 38 58
mm mm mm pc(s)
38 58
M8 8
mm mm pc(s)
30
20
20
20
10
30
25
mm mm mm pc(s)
Part No. Material of conductor holder Conductor holder support Rd Tensioning range pipe Screw Material of screw Packing unit
www.dehn.de
mm mm mm pc(s)
120 61
0.3
2.5 17
1100
67
23
26
3
20
23
26
3
HVI Conductor
Accessories for HVI Conductor Roof Conductor Holder for flat roofs
R4 70 56
for the fixing of round conductors and strips on flat roofs with single conductor holder Type FB
Part No. Conductor leading Material of conductor holder Colour of conductor holder Conductor holder support Rd Block Weight Packing unit 253 015 loose plastic black 8 concrete (C35/45) 1 10
mm kg pc(s)
47
13
100
with roof conductor holder Type FB (Part No. 253 015) for snapping on
Part No. Material Colour Conductor holder support Rd Packing unit 253 026 plastic black 20 50 253 027 plastic black 23 50
20
32
42
mm pc(s)
30
M6
Part No. Material Thread Female thread Length Colour Packing unit
18
mm pc(s)
28
for mounting of the plastic conductor holder (Part No. 275 220 and 275 223) with thread M8 for hooking or pushing underneath of tiles for the sealing end range
107
28
Part No. Material of roof conductor holder Thread Length of brace Packing unit
mm pc(s)
2.5
30
260
5
28
70
25
Part No. Material of roof conductor holder Material of conductor holder Conductor leading Conductor holder support Rd Height of brace Length of brace Fixing Packing unit
mm mm mm mm pc(s)
68
www.dehn.de
HVI Lightning Protection Accessories for HVI Conductor Roof Conductor Holder with Angled Brace for HVI Conductor
for installing the HVI conductor on the surface of gable roofs
Part No. Material of roof conductor holder Material of conductor holder Conductor leading Conductor holder support Rd Height of brace Length of brace Fixing Packing unit 202 830 St/tZn PA fixed 20 55 115 [2x] 5.2 25 202 840 St/tZn PA fixed 23 55 115 [2x] 5.2 25
17 55 32 115
HVI Conductor
mm mm mm mm pc(s)
14 50
28
16
5.2
48
5.2
6
mm mm mm mm pc(s)
134 263
5
28
70
25
d1
mm mm mm
l2
pc(s)
Part No. Material of conductor holder/adapter Length Thread Screw / grooved pin Packing unit
l1
19
12 5 16.5 30 25
mm
pc(s)
www.dehn.de
69
HVI Conductor
Accessories for HVI Conductor
18 60
90
337
Concrete Base
325
stackable, for wedge mounting of chamfered or tapered air-termination rods 16 mm or of DEHNiso spacers 16 mm
Part No. Weight Support Diameter Material Material of wedge/adapter Packing unit kg mm mm 102 010 17 wedge mounting 16 337 concrete (C45/55) StSt 54
26 40
28 114 80
depth 40 mm 41
pc(s)
10
360
370
3.5
Support Plate
to protect the roofing sheets under the concrete base for concrete bases (Part No. 102 010, 102 0029
Part No. Diameter (d1) Diameter (d2) Material Colour Packing unit mm mm 102 050 370 360 EVA black 1
pc(s)
Bolt Clamp
for fixing the HVI conductor e.g. at already mounted C rails clamp with bottom saddle
50 24 R12 23 R10.7 34
Part No. Material of conductor holder Conductor holder support Rd Screw Material of screw Packing unit
mm mm pc(s)
C Rail
separate for cutting to length
16.5
35
mm m
70
1.5
18
www.dehn.de
HVI Lightning Protection Accessories for HVI Conductor Tripod for HVI Conductor in Supporting Tube
Special design for HVI Conductor run inside of the supporting tube (length 3200 mm) In order to keep the bending radius of the HVI Conductor at the bottom of the tripod, two concrete blocks will be positioned under the limb and one on top. The stackable concrete block (Part No. 102 010) and the support plate (Part No. 102 050) have to be ordered separately.
Part No. Material of tripod Support Quantity of concrete blocks Radius Space required for tripod Packing unit 105 350 St/tZn 50 9 560 1180x1320 1
HVI Conductor
16
30
mm mm mm pc(s)
40/50
1200
120
R5
60
1330
300
www.dehn.de
71
HVI conductor inside of the supporting tube, optically adjusted, provides little wind exposed surface Minimum order length 6 or 8 m. Conductor length to be indicated when ordering Being a customized product (customized conductor length) the conductor can not be returned.
20
1000
50 1535
50 1535
3200 / 4700
16
100 l1
M10
l1
3200
1650 / 3150
3800
50
8.4 25 10 40
1650
50
Part No. Material of conductor Material of supporting tube Length of supporting tube Colour of conductor Outer conductor Minimum order length (l1) Packing unit 72
mm mm m pc(s)
100
Part No. Material of conductor Material of supporting tube Length of supporting tube Colour of conductor Outer conductor Minimum order length (l1) Packing unit
mm mm m pc(s)
3800
60
60
HVI Lightning Protection HVI Conductor II in supporting tube with air-termination spike
with interior sealing end and air-termination spike 10 mm, length 1000 mm
100 M10 10 50
20
1000
1400
16
50 l1 1535
1535 11 27
50
11 27 36
36
49
3200
3200
3800
1400< x <1600
3800
1650
1650
50
8.4 50 25 10
50
8.4 25 50
100
10
Part No. Material of conductor Material of supporting tube Length of supporting tube Colour of conductor Outer conductor Minimum order length (l1) Packing unit
mm mm m pc(s)
Part No. Material of conductor Material of supporting tube Length of supporting tube Colour of conductor Outer conductor Minimum order length (l1) Packing unit
100
1400< x <1600
60
60
49
l1
mm mm m pc(s)
M10
20
1000
1400
16
50 1535
1535
50
3200 / 4700
l1
3200
1650 / 3150
3800
60
60
11
1650
50
8.4 40 25 10
50
8.4 40 100
100
25 10
Part No. Material of conductor Material of supporting tube Length of supporting tube Colour of conductor Outer conductor Minimum order length (l1) Packing unit
www.dehn.de
mm mm m pc(s)
Part No. Material of conductor Material of supporting tube Length of supporting tube Colour of conductor Outer conductor Minimum order length (l1) Packing unit
l1
mm mm m pc(s)
Antennas with a radiation characteristic of 360 are used in different fields of radio application. Such antennas are known as omnidirectional antennas on the market. Typical applications of omnidirectional antennas in practice are private mobile radio (PMR) systems, safety nets and sometimes also GSM networks. In GSM networks, however, they are only applied if there is a low frequency of radio waves. For omnidirectional antennas it has to be taken into account that metal structures in the direct vicinity have a negative, i.e. attenuating influence on the radiation characteristics. Hence, the father from the antenna, the lower the influence of these structures on the radiation characteristics. For evaluating what type and size of closely situated metal structures do interfere the radiation characteristics, measurings for products of DEHN + SHNE have been carried out together with Kathrein, a German company in Rosenheim. When installing an isolated air-termination systems at an omnidirectional antenna it has to be minded that an isolated air-termination rod provides a sufficient protective angle for the antenna to be protected. A sufficient separation distance s has to be kept as well. If the HVI conductor is used for isolated air-termination systems, a maximum separation distance in air of 0.75 m has to be complied with. Considering the mechanical deflection of antenna and air-termination system in case of wind, a distance of 1 m between antenna and isolated air-termination system has to be specified for wind velocities up to 145 km/h. Referring to the radio technical evaluation the resulting distance is equal to one quarter of the wave length. Calculation of wave length and a synopitcal table are shown in the following. Preferred frequency range of private mobile radio systems is 40 MHz. The typical frequency range of emergency call systems (fire brigade, police, etc.) presently is 80 MHz and 160 MHz. Security authorities and organizations (BOS) in Germany are going to be operated at a frequency of 400 MHz. Current GSM networks are operated at 900 MHz and 1800 MHz, UMTS system has 2 GHz.
74
www.dehn.de
air-termination rod Al 10 mm
L = 1000 mm
omnidirectional antenna
length approx. 1000 mm
1000 mm
GRP 50x4 mm
L = 1500 mm
e.g.
spacer
Part No. 105 363, 55-100 mm Part No. 105 364, 100-150 mm Part No. 105 365, 150-190 mm
approx. 1000 mm
wave length =
h"
air-termination rod Al 10 mm
L = 1000 mm
omnidirectional antenna
length approx. 1000 mm
air-termination rod Al 16 mm
L = 1500 mm
1 Frequency (Hz =) s
100 000 1 000 000 10 000 000 100 000 000 40x 106 80x 106 160x 106 900x 106 1 800x 106 Table
GRP 50x4 mm
L = 1500 mm
e.g.
spacer
Part No. 105 363, 55-100 mm Part No. 105 364, 100-150 mm Part No. 105 365, 150-190 mm
1000 mm
approx. 1000 mm
Spacer for DEHNiso Combi supporting tubes with HVI conductor inside and/or outside
1000 6 100 d
28
Part No. Material of spacer/T profile Clamping range ( mast) Clamping range of supporting tube Length of spacer Screw Material of screw Dimension (w1 x h1 x d1) Packing unit
www.dehn.de
40
mm mm mm mm mm pc(s)
h1
50
2 40
t1
b1
Biogas/natural gas plant Kerpen, Germany Protection of the fermenters air-termination masts with HVI conductors
100
M10
10
50
10 16
1000
20
2500
1400
16
2500
50
2050
60 50
insertion depth 200
10350
1535
7850
50
10350
2050
50
8500
l1
200
insertion depth 200
6000
8.4 40
20
100
60
25 10
Part No. Conductor length of HVI conductor (l1) Length of air-termination rod Length of supporting tube Length of mast pipe Total length of air-termination mast Packing unit 76
mm mm mm mm mm pc(s)
Part No. Conductor length of HVI conductor (l1) Length of air-termination rod Length of supporting tube Length of mast pipe Total length of air-termination mast Packing unit
mm mm mm mm mm pc(s)
l1
HVI Lightning Protection Accessory for Air-termination Masts with HVI Conductor Variable Support for Air-termination Masts
three supports per air-termination mast are to be mounted clamping range of air-termination mast 60 mm
Part No. Material of support Range of adjustment Clamping range of air-termination mast Fixing bores Profile Screw Material of screw Packing unit 105 345 St/tZn 250-350 60 [4x] 12x25 40x40x4 / 30x30x3 di M10x30 / M10x45 StSt 1
mm mm mm mm pc(s)
10
6 15
12
150
225
www.dehn.de
77
HVI conductor light also allows for installations without performing an equipotential bonding with the building or structure at the end of an adjustment range. HVI conductor light is a supplementation to the proved HVI conductor. The coupling point has to be implemented as defined, e.g. at the tripod, without an equipotential bonding (functional earth conductor) being necessary. Thus mounting and installation is easier and a lot of time can be saved. The roof surface of buildings today is often the final installation level. Pipings, electrical and IT systems as well as PV systems are installed on the roof regardless of the potential risk of lightning strikes. All of these systems having a conductive connection into the structure, lightning partial currents can also enter the building and influence or even destroy electrical/electronic equipment. This dragging of lightning partial currents into the buildings can be avoided by isolated air-termination systems.
HVI conductor light is the system for keeping the separation distance on flat roofs. Uncontrolled flashover e.g. through the roofing to metal or electrical parts underneath will be avoided by the high-voltage resistant insulation of the HVI conductor light. The conductor will be delivered in a length of 100 m on a disposable plywood reel (diameter approx. 800 mm, width approx. 500 mm) including one Allen key. high-voltage-resistant insulated HVI conductor light for keeping the separation distance from electrically conductive parts according to EN 62305-3 equivalent separation distance s ) 0.45 m (in air), or s ) 0.90 m (solid building material) The HVI conductor light meets the requirements according to EN 50164-2
Part No. Material of conductor Material of insulation Material of coating Colour of conductor Cross section of core Outer conductor Packing unit
mm2 mm m
17
SW17 20 M12
36
2.5 55 95 10
28
75
49
11
mm pc(s)
mm mm mm pc(s)
27
Air-termination mast complete set with quad terminal plate for HVI conductor light and fixing set for mounting the conductor at the air-termination mast adjustable to roof inclination up to max. 10 concrete bases (weight 17 kg) and support plates have to be ordered separately When using air-termination mast Part No. 819 280 with a total height of 2900 mm, and Part No. 819 281, total height 2600 mm, three concrete bases (weight 17 kg) provide stability for wind velocities up to 162 km/h (wind load zone III). When using air-termination mast Part No, 819 285 with a total height of 3900 mm, three concrete bases (weight 17 kg) are necessary to provide stability for wind velocities up to 145 km/h (wind load zone II) and six contrete bases (weight 17 kg) provide stability for wind velocities up to 162 km/h (wind load zone III). For air-termination mast Part No. 819 286 with a total height of 3100 mm, three concrete bases (weight 17 kg) have to be used to provide stability for wind velocities up to 145 km/h (wind load zone II).
Air-termination mast 30 for HVI conductor light SET I 2600 mm total height
Air-termination mast 30 for HVI conductor light SET II 3100 mm total height
=
1000 10
1000
16 450
10
3060
top view: 30
top view: 30
2610
740
1195
1195
740
R2
50
R2
50
1500
790
790
220
Part No. Material of tripod Material of supporting tube Length of supporting tube Insulating clearance Female thread Length of air-termination spike Material of air-termination spike Packing unit
www.dehn.de
mm mm mm pc(s)
Part No. Material of tripod Material of supporting tube Length of supporting tube Insulating clearance Female thread Length of air-termination rod Material of air-termination rod Packing unit
220
22
1500
22
mm mm mm pc(s)
Air-termination mast 50 for HVI conductor light SET II 3900 mm total height
1000
10 2000
1000
16
10 top view: 50
50
top view:
1535
1210
1535
R5 60
1210
R5 60
1340 1900
1900
1340
Part No. Material of tripod Material of supporting tube Length of supporting tube Insulating clearance Female thread Length of air-termination spike Material of air-termination spike Packing unit
mm mm mm pc(s)
Part No. Material of tripod Material of supporting tube Length of supporting tube Insulating clearance Female thread Length of air-termination rod Material of air-termination rod Packing unit
mm mm mm pc(s)
for the fixing of round conductors and strips on flat roofs with single conductor holder Type FB
Part No. Conductor leading Material of conductor holder Colour of conductor holder Conductor holder support Rd Block Weight Packing unit 253 015 loose plastic black 8 concrete (C35/45) 1 10
mm kg pc(s)
47
13
100
for snapping on
Part No. Material Colour Conductor holder support Rd Packing unit 253 026 plastic black 20 50
www.dehn.de
20
32
42
pc(s)
80
mm mm mm mm pc(s)
260
5
28
70
25
mm mm mm mm pc(s)
14 50
28
16
5.2
48
5.2
6
mm mm mm mm pc(s)
134 263
5
28
70
25
mm mm mm pc(s)
mm mm mm pc(s)
20
19 44 69 30 42
25
81
28
30
Part No. Material Thread Female thread Length Colour Packing unit
mm pc(s)
18
20
16
19
mm mm mm
475
500
pc(s)
18
60
Concrete Base
for wedge mounting of air-termination rods 10, length 1000 mm or of DEHNiso spacers 16 mm, length up to 675 mm (distance 1 m)
240 90
30
Part No. Total weight Diameter Material Material of wedge/adapter Packing unit
kg mm
pc(s)
230
26
21
26
230
10
26
3.5
Support Plate
to protect the roofing sheets under the concrete base for concrete bases (Part No. 102 075, 102 0039)
Part No. Diameter (d1) Diameter (d2) Material Colour Packing unit mm mm 102 060 280 270 EVA black 1
270
pc(s)
280
82
www.dehn.de
18 60 90
337
Concrete Base
stackable, for wedge mounting of chamfered or tapered air-termination rods 16 mm or of DEHNiso spacers 16 mm
Part No. Weight Support Diameter Material Material of wedge/adapter Packing unit kg mm mm 102 010 17 wedge mounting 16 337 concrete (C45/55) StSt 54
325
114 80 40 depth 40 mm 41
10
pc(s)
26
28
360
370
Support Plate
to protect the roofing sheets under the concrete base for concrete bases (Part No. 102 010, 102 0029)
Part No. Diameter (d1) Diameter (d2) Material Colour Packing unit mm mm 102 050 370 360 EVA black 1
pc(s)
3.5
www.dehn.de
83
DEHNcon-H
Equivalent separation distance s ) 0.45 m (in air), s ) 0.90 m (solid building material) Supporting tube with insulating section out of glass-fibre reinforced plastic (GRP) tube 30 mm Material factor km = 0.7 Colour light grey, UV stabilized HVI conductor light fulfils the requirements of EN 50164-2. DEHNcon-H HVI conductor light I is used if the air-termination system is directly connected with the earth-termination system of the building. DEHNcon-H HVI conductor light III with a sealing end to be implemented on site is used if connection with other parts of the external lightning protection system shall be effected. The separation distance at the terminal point is s ) 0.175 m (in air) or s ) 0.35 m (solid building material). The entire structure is dimesioned for wind velocities up to 185 km/h (Wind Load Zone IV). Minimum order quantity is 6 m. Please indicate the conductor length on your order. More details in installation instructions No. 1632 Being a customized product (customized conductor length) the conductor can not be returned.
Detail supporting tube with installed conductor
Isolated air-termination system all roof-mounted structures such as solar thermal, PV and exhaust systems incl. the parabolic antenna in the protective area
When laying bare, uninsulated wires of the air-termination system directly on the roof surface, the separation distance to electrical and metal systems installed under the roof has to be kept according to state-of-the-art and the actual standard of protection against lightning EN 62305-3. Cables, pipings and metal parts installed underneath the roofing often are in close vicinity to the air-termination systems/down conductors thus may provide a problem in terms of proximity. Isolated air-termination systems with high-voltage insulated down conductors are a solution in such cases. New type of isolated air-termination system for transmitters/ receivers (parabolic, terrestrial antennas) or whole buildings or structures Optically adjusted design with the HVI conductor light inside of the supporting tube, reduced size of the supporting tubes (Al pipe 40x5 mm) and light weight of the whole structure, also suitable for subsequent mounting at antenna poles Interior sealing end providing a flexible StSt strip which is led out at the bottom end of the supporting tube for equipotential bonding connection High-voltage-resistant insulated down conductor for keeping the separation distance from electrically conductive parts according to EN 62305-3
84
www.dehn.de
DEHNcon-H
10
500/1000 45
20 17
40 30x3
1195
2055/2705
1000/1650
1125
18x0.4
15
500/1000
20 17
40 30x3
1195
2055/2705
40
Part No. Material of conductor Material of supporting tube Length of air-termination spike Length of supporting tube Outer conductor Colour of conductor Minimum order quantity (l1) Packing unit
mm mm mm m pc(s)
1000/1650
1125
90
10
45
40
Part No. Material of conductor Material of supporting tube Length of air-termination spike Length of supporting tube Outer conductor Colour of conductor Minimum order quantity (l1) Packing unit
850/1500
mm mm mm m pc(s)
10
40x5
20 20 SW17 10
60
l1
36
20 SW17 10 60
27 49
www.dehn.de
85
DEHNcon-H
Accessories for DEHNcon-H Fixing Clamp for DEHNcon-H
20 3 28 3 26
Clamp for fixing the supporting tube e.g. at the antenna pole with spacer length 30 mm, in order to adjust antenna supports
Part No. Material Clamping range pipe Clamping range of supporting tube Length of spacer Screw Material of screw Packing unit 105 161 StSt 45-65 (11/2 - 2'') 40 30 e M8x40 / e M8x70 StSt 1
30
30
28 122
122
19
mm mm mm mm pc(s)
26
-50 40
94
Fixing Bracket
wall fixing bracket for vertical mounting for fixing of the supporting tubes or air-termination rods D40/D50
Part No. Material of bracket Fixing Clamping range of supporting tube Wall/corner distance Dimension of fixing Material of screw Packing unit 105 342 StSt [8x] 5.1 / [4x] 7x10 / [2x] 11x20 40-50 46 170 StSt 1
40
5.1
20
11 40
10
30
45
20
mm mm mm mm pc(s)
170
35
40
40
2.5 64
320 5.1 75
Part No. Material Fixing Wall distance Clamping range of air-termination rod Material of screw Packing unit
mm mm mm pc(s)
25
11
80 40
100
50
50
11
20
15
28
28 3
Part No. Material Clamping range pipe Screw Material of screw Clamping range of supporting tube Packing unit
mm mm mm pc(s)
105 354 StSt 48-60 (1 1/2 - 2'') e M8x40 / e M8x50 StSt 40-50 5
20
26
94 122
26
Fixing Bracket
wall fixing bracket with adjustment range of 400-700 mm for fixing of the supporting tubes or air-termination rods D40/D50
Part No. Material of bracket Clamping range of supporting tube Wall/corner distance Dimension of plate Fixing Profile Packing unit 105 343 St/tZn / StSt 40-50 400-700 120x120x4 [4x] 12x25 40x40x4 / 30x30x3 1
40
14
400-700 349 40
40x4
30x3
11
4
4 0/ 50
94
40 4 120
12
3 400
mm mm mm mm pc(s)
122 94
20 28 3 26
49
28 120
0.3
2.5 17
1100
86
23
HVI Lightning Protection Accessories for DEHNcon-H Roof Conductor Holder with Straight Brace for HVI Conductor
for installing the HVI conductor on gable roof surfaces
Part No. Material of roof conductor holder Material of conductor holder Conductor leading Conductor holder support Rd Height of brace Length of brace Fixing Packing unit 202 831 St/tZn PA fixed 20 55 260 [2x] 5 25
17 55 32
DEHNcon-H
260
mm mm mm mm pc(s)
5
28
70
25
115
mm mm mm mm pc(s)
14 50
mm mm mm mm pc(s)
17 55 32
28
16
5.2
48
5.2
134
263
5
28
70
25
mm mm mm pc(s)
R10 2
6.5
16 38 58
mm mm mm pc(s)
20
20
19 44 69
M8 10 13 28 30 M6 18
10
30 42
mm pc(s)
87
Roof conductor holder for fixing the HVI Conductor light I at the end of the connection range (height: 175 mm), e.g. at eaves gutters of gable roofs
17 32
Part No. Material of roof conductor holder Material of conductor holder Conductor leading Conductor holder support Rd Height of brace Length of brace Fixing Packing unit
mm mm mm mm pc(s)
155
260
5 28 70 25
17 32 155 115 2 14 48 16 5 48
Part No. Material of roof conductor holder Material of conductor holder Conductor leading Conductor holder support Rd Height of brace Length of brace Fixing Packing unit
mm mm mm mm pc(s)
17 32
Part No. Material of roof conductor holder Material of conductor holder Conductor leading Conductor holder support Rd Height of brace Length of brace Fixing Packing unit 88
mm mm mm mm pc(s)
155
28
134 260 5 28 70 25
www.dehn.de
=
48 578
53 24-
25 50 136 17 15 50 60 13
10.5
60
11
22
600-750
Part No. Material Adjustment range Roof pitch Outer of supporting tube of cable bushing in supporting tube Packing unit
mm mm mm mm pc(s)
mm mm
mm C C
105 245 105 246 aluminium mit UV stabilized plastic coating 450 x 500 450 x 500 38 - 60 38 - 60 24 - 53 24 - 53 UV stabilized rubber mixture rubber based plastical sealant strongly adhesive, self-welding 600 x 80 600 x 80 +5 to +40 +5 to +40 -40 to +80 black 1 -40 to +80 red 1
15
61
75
113 144
130
4 1.5
60 45 40
74
450
104 87 70
116
69
90
125
38
500
75
89
More details in installation instructions No.1759 The minimum order length is 6 m, conductor length to be indicated when ordering. For being a customized product (customized conductor length) the conductor can not be returned.
DEHNcon-H HVI conductor light I in the supporting tube with air-termination spike
with interior sealing end and air-termination spike 10 mm, length 1000 mm
90 10
45
20
1000
1125
1000
2500
16
40 30x3
1195
18x0.4 1000 l1
2940
15
40x5 10
50
l1
1385
20
350
1950
60x5 40
350
1560
60
8.4
3800
100
10
10
Part No. Material of conductor Material of supporting tube Supporting tube GRP mm Length of supporting tube mm Colour of conductor Outer of conductor mm Equivalent separation distance s (in air) m Minimum order length (l1) m Packing unit pc(s)
Part No. Material of conductor Material of supporting tube Supporting tube GRP mm Length of supporting tube mm Colour of conductor Outer of conductor mm Equivalent separation distance s (in air) m Minimum order length (l1) m Packing unit pc(s)
90
100
20
25
40
1400
100
M10
www.dehn.de
DEHNcon-H HVI conductor light III in the supporting tube with air-termination spike
with interior sealing end and air-termination spike 10 mm, length 1000 mm
45
10
10
50
17 1000
1125
1000
20
2500
16
40 30x3
1195
18x0.4 1000 l1
2940
15
40x5 10
50
l1
1385
20
1950
350
60x5
11
350
1560
3800
60
11
8.4 25 10 40 100
10
Part No. Material of conductor Material of supporting tube Supporting tube GRP mm Length of supporting tube mm Colour of conductor Outer of conductor mm Equivalent separation distance s (in air) m Minimum order length (l1) m Packing unit pc(s)
100
25
40
Part No. Material of conductor Material of supporting tube Supporting tube GRP mm Length of supporting tube mm Colour of conductor Outer of conductor mm Equivalent separation distance s (in air) m Minimum order length (l1) m Packing unit pc(s)
1400
100
90
www.dehn.de
91
92
www.dehn.de
32
19
10
20
30 5.1
R10
52 73
7 100
Part No. Material of base part Material of cleat Conductor holder support Rd Material of brace Fixing Screw Packing unit
mm mm mm pc(s)
275 420 ZDC StSt 20 StSt [4x] 5.1 / [2x] 7x10 dm M6x16 10
R10
Part No. Material of base part Material of cleat Conductor holder support Rd mm Material of brace Screw mm Packing unit pc(s)
16
Connecting Brace
for installing the HVI conductor with conductor holder and spacer sleeve (Part No. 275 420) on a non-conductive structure e.g. stone or wood
500 478 5.5 30 19 10 R17
t=3 10 35
mm mm pc(s)
www.dehn.de
93
Fixing Plate
Base plate for the spacer or the spacer bar (16 mm) to be fixed e.g. at construction components
45
30
170 35 20 7 10 5.1 11 35 20
Part No. Material of fixing plate Material of fixing bush Fixing Dimension (l x w x d) Screw Material of screw Packing unit
mm mm mm pc(s)
106 127 StSt ZDC [8x] 5.1 / [4x] 7x10 / [2x] 11x20 170x40x3 di M8x12 StSt 20
20 35 45 35 45
10
40
45
40
61
26
Part No. Material Width of slot (l x w) Clamping range Rd Material of bush Packing unit
mm mm pc(s)
0.3
2.5 17
23
25
40
3
1100
Pipe Clamp
for fixing (tensioning) of the attachment with fixing bush (Part No. 106 322) at different pipes
Part No. Material of head/strap Clamping range Dimension of strap (l x w x d) Screw Material of screw Packing unit 106 323 StSt 50-300 1100x25x0.3 di M8x20 StSt 10
mm mm mm pc(s)
94
www.dehn.de
CUI Conductor
The surge withstand capability of 100 kV (1.2/50 s) is achieved by an insulation out of special cross-linked polyethylene (XLPE). Without additional measures, high impulse voltages cause sparkovers at insulating surfaces. This effect is known as creeping discharge. If the creeping discharge inception voltage is exceeded, a surface discharge will be initiated, which can easily spark over a distance of several metres to earthed parts. In order to avoid arising creeping discharges even at rain, the CUI conductor additionally has a shield which keeps the conductor dry. This shield on the conductor and the drops after the rain test is shown in Figure 4. For the development of the CUI conductor, account was taken to the rain test according to IEC 60-1 Subclause 9. This test requires a specific quantity of water to be sprayed on the conductor in an angle of approx. 45. This test is shown in Figs. 4 and 5.
The CUI conductor is available in two standard lengths of 3.5 m and 5 m and will be installed vertically at the wall with corresponding conductor holders. One head piece and the shield are premounted. The conductor can be shortened on site but can not be extended. Disconnecting or MV clamps e.g. can be used for connection to the down conductor. Cross units which additionally have to be protected against corrosion can be used e.g. to connect the CUI conductor to the earth-termination system. Application of the CUI conductor in the entrance/exit area of a mulitpurpose hall is shown in Fig. 6. With the new patented system CUI conductor, touch voltage at down conductors can be avoided. More details on CUI conductor in installation instructions No. 1482
Figure 6: Application in entrance area
Effective protection measures against injuries due to touch voltages are defined according to the standard as follows the bare down conductor is coated with a material providing insulation at an impulse withstand voltage of 100 kV at 1.2/50 s, e.g. cross-linked polyethylene at least 3 mm thick; there are physical restrictions and/or warning signs to minimize the probability of down conductors being touched. The CUI conductor (CU copper Insulated) has an inner cooper conductor with a diameter of 8 mm and a high-voltage-resistant insulation (see Figure 3).
Figure 3: Design of a CUI conductor
These conductors have to provide a surge withstand capability of 100 kV (1.2/50 s) and to avoid creepage sparkover even at rain.
2.50 m
www.dehn.de
95
CUI Conductor
38 10
95
23
445
20
67
l1
Part No. Material of conductor Material of insulation Outer of conductor Colour of conductor Cross section of core Total length (l1) Packing unit
mm mm2 mm pc(s)
96
www.dehn.de
Height 19 mm
20
Height 10 mm
R10 2
42
19
6.5
30
25
16 38 58
44 69
Part No. Material of conductor holder Conductor holder support Rd Height of conductor holder Fixing Thread Packing unit
mm mm mm pc(s)
Part No. Material of conductor holder Conductor holder support Rd Height of conductor holder Fixing Packing unit
20
10
mm mm mm pc(s)
20
8.2
Part No. Material of conductor holder Conductor holder support Rd mm Fixing mm Packing unit pc(s)
6.5
58 38
www.dehn.de
97
98
www.dehn.de
80
117 17
12 R4
70
R4
55
55
29
86
141
59 86
75 120 141
Part No. Conductor leading Material of conductor holder Colour of conductor holder Conductor holder support Rd mm Block Weight kg Dimension (l x w x h) mm Packing unit pc(s)
Part No. Conductor leading Material of conductor holder Colour of conductor holder Conductor holder support Rd Dimension (l x w x h) Packing unit
mm mm pc(s)
Part No. Conductor leading Material of conductor holder Colour of conductor holder Conductor holder support Rd mm Block Weight kg Dimension (l x w x h) mm Packing unit pc(s)
56
47
13
100
70
70
www.dehn.de
99
R4 70
55
17.5
5.5
100 47
102
100
96
110
Part No. Conductor leading Material of conductor holder Colour of conductor holder Conductor holder support Rd Dimension (l x w x h) Packing unit
mm mm pc(s)
More details in installation instructions No. 1251 Separate plastic top Type KF Part No. 253 016 upon request
Accessories for Roof Conductor Holders for flat roofs Adapter for round conductor holders Type FB and KF
to be snapped on roof conductor holders for conductors Rd 10 mm, loose conductor leading
R5
42
Part No. Conductor holder support Rd mm Material Colour Packing unit pc(s)
17
20
32
to be snapped on roof conductor holder (Part No. 253015) for flat conductors 30 mm, loose conductor leading
26 25 32
48
mm
pc(s)
42
Part No. Conductor holder support Rd mm Material Colour Packing unit pc(s)
22
10
100
3 7
31
105
96
14
www.dehn.de
Roof Conductor Holders with tension spring for ridge and hip tiles
Roof conductor holders for air-termination conductors to be fixed at the ridge e.g. of tiled roofs
SPANNsnap light
for fixing by StSt tension spring with conductor holder DEHNsnap, loose conductor leading, laterally adjustable
h1 33
1
25
20
70
clamping range
Part No. Material of roof conductor holder Clamping range of ridge tile width Height of conductor holder (h1) Material of conductor holder Colour of conductor holder Conductor holder support Rd Packing unit
1.5
mm mm
mm pc(s)
SPANNsnap
for fixing by StSt tension spring with conductor holder DEHNsnap, loose conductor leading, laterally adjustable
h1 33
1
25
20
70
clamping range
70
Part No. Material of roof conductor holder Clamping range of ridge tile width Height of conductor holder (h1) Material of conductor holder Colour of conductor holder Conductor holder support Rd Packing unit
25
mm mm
mm pc(s)
SPANNgrip light
for fixing by StSt tension spring with DEHNgrip conductor holder, loose conductor leading, laterally adjustable
h1 33
1
25
20
70
clamping range
Part No. Material of roof conductor holder Clamping range of ridge tile width Height of conductor holder (h1) Material of conductor holder Conductor holder support Rd Packing unit
1.5
mm mm mm pc(s)
SPANNgrip
for fixing by StSt tension spring with DEHNgrip conductor holder, loose conductor leading, laterally adjustable
h1 33
20
25
70
clamping range
70
Part No. Material of roof conductor holder Clamping range of ridge tile width Height of conductor holder (h1) Material of conductor holder Conductor holder support Rd Packing unit
www.dehn.de
25
mm mm mm pc(s)
Conductor holder for air-termination conductors to be fixed at the ridge e.g. of tiled roofs
h1
12 23
clamping range 24
Part No. Material of roof conductor holder Clamping range Height of conductor holder (h1) Material of conductor holder Colour of conductor holder Conductor holder support Rd Packing unit
mm mm
mm pc(s)
h1
12 23
clamping range 24
Part No. Material of roof conductor holder Clamping range Height of conductor holder (h1) Material of conductor holder Conductor holder support Rd Packing unit
mm mm mm pc(s)
102
www.dehn.de
R4.5
clamping range
Part No. Material of roof conductor holder Clamping range Material of conductor holder Conductor holder support Rd Packing unit
mm mm pc(s)
FIRSTsnap
to be attached on the ridge clamp in case of dry ridge, with DEHNsnap conductor holder, loose conductor leading
16
53
25
33
28 42
Part No. Material of roof conductor holder Height of conductor holder Material of conductor holder Colour of conductor holder Conductor holder support Rd Packing unit
mm
mm pc(s)
Part No. Material of roof conductor holder Bore Material of conductor holder Conductor holder support Rd Conductor holder support Fl Packing unit
20
30
68
mm mm mm pc(s)
www.dehn.de
103
Roof conductor holders for fixing of air-termination conductors and down conductors
UNIsnap
with preformed bending points for hooking at the tiles or battens, with DEHNsnap conductor holder, loose conductor leading
h1
10
25 4
25
22 l1
20
14
Part No. Material of roof conductor holder Length of brace (l1) Height of conductor holder (h1) Material of conductor holder Colour of conductor holder Conductor holder support Rd Packing unit Part No. Material of roof conductor holder Length of brace (l1) Height of conductor holder (h1) Material of conductor holder Colour of conductor holder Conductor holder support Rd Packing unit
204 149 StSt mm 205 mm 16 plastic grey mm 8 pc(s) 50 204 924 StSt mm 205 mm 36 plastic brown mm 8 pc(s) 50
204 921 StSt 205 16 plastic brown 8 50 204 177 StSt / gal Cu 205 36 plastic brown 8 50
204 147 StSt / gal Cu 205 16 plastic brown 8 50 204 189 StSt 335 36 plastic grey 8 50
204 159 StSt 335 16 plastic grey 8 50 204 925 StSt 335 36 plastic brown 8 50
204 157 StSt / gal Cu 335 16 plastic brown 8 50 204 187 StSt / gal Cu 335 36 plastic brown 8 50
204 169 StSt 475 16 plastic grey 8 50 204 199 StSt 475 36 plastic grey 8 50
204 179 StSt 205 36 plastic grey 8 50 204 197 StSt / gal Cu 475 36 plastic brown 8 50
16
10
25
25
20 205
14
Part No. Material of roof conductor holder Length of brace (l1) Height of conductor holder (h1) Material of conductor holder Colour of conductor holder Conductor holder support Rd Packing unit 104
mm mm
mm pc(s)
with preformed bending points for hooking at tiles or battens, with DEHNgrip conductor holder, loose conductor leading
h1
10
25 4
25
22 l1
20
14
Part No. Material of roof conductor holder Length of brace (l1) Height of conductor holder (h1) Material of conductor holder Conductor holder support Rd Packing unit Part No. Material of roof conductor holder Length of brace (l1) Height of conductor holder (h1) Material of conductor holder Conductor holder support Rd Packing unit
mm mm mm pc(s) Cu mm mm mm pc(s)
206 219 StSt 335 20 StSt 8 50 206 319 StSt 335 32 StSt 8 50
10
25 4
1 4
25
22 205
20
14
Part No. Material of roof conductor holder Length of brace (l1) Height of conductor holder (h1) Material of conductor holder Conductor holder support Rd Packing unit
mm mm mm pc(s)
36
10
25 4
160
25
22 205
20
14
Part No. Material of roof conductor holder Length of brace (l1) Height of conductor holder (h1) Material of conductor holder Colour of conductor holder Conductor holder support Rd Packing unit
www.dehn.de
mm mm
mm pc(s)
Roof Conductor Holders with angled flexible brace for roof surfaces
Roof conductor holder for mounting at the roof tiles with flexible brace made of thin StSt (0.3 mm), adjustable to interlocking tiles
FLEXIsnap
loose conductor leading
h1 0.3 20 10 20 1 29 170
Part No. Material of roof conductor holder Length of brace Height of conductor holder (h1) Material of conductor holder Colour of conductor holder Conductor holder support Rd Packing unit
mm mm
mm pc(s)
FLEXIgrip
loose conductor leading
32
10
20 29
0.3
25
20 1 170
Part No. Material of roof conductor holder Length of brace Height of conductor holder (h1) Material of conductor holder Conductor holder support Rd Packing unit
mm mm mm pc(s)
Roof Conductor Holder DEHNspann with embossed brace for roof surfaces
Roof conductor holder for fixing air-termination conductors and down conductors on the roof surface For inserting the wire just press the limbs together and it will be fixed due to the characteristics of the used spring steel.
25
R4.2
40
0.8
48
25
20 232
14
Part No. Material of roof conductor holder Brace length Height of conductor holder Conductor holder support Rd Packing unit
mm mm mm pc(s)
106
61
www.dehn.de
Roof conductor holder for insertion at tiled, slated and roofing felt roofs
Straight design
with DEHNQUICK conductor holder, fixed conductor leading
R4.5
20 h1 32
l1 5 28 70 25
Part No. Material of roof conductor holder Height of brace (h1) Length of brace (l1 / t1) Material of conductor holder Conductor holder support Rd Packing unit
mm mm mm pc(s)
Cranked design
with DEHNQUICK conductor holder, for conductors Rd 6-10 mm, fixed conductor leading
R4.5
20 55 32
134 6 t1 5 28 70 28
l1
Part No. Material of roof conductor holder Height of brace (h1) Length of brace (l1 / t1) Material of conductor holder Conductor holder support Rd Packing unit
mm mm mm pc(s)
www.dehn.de
107
20
16
20
20 25 1 25
20 25 1 25
169
169
Part No. Material of roof conductor holder Length of brace (l1) Height of conductor holder Material of conductor holder Colour of conductor holder Conductor holder support Rd Packing unit
mm pc(s)
Part No. Material of roof conductor holder Length of brace (l1) Height of conductor holder Material of conductor holder Conductor holder support Rd Packing unit
mm mm mm pc(s)
20
36/48
Part No. Material of roof conductor holder Length of brace (l1) Material of conductor holder Conductor holder support Rd Packing unit
mm mm pc(s)
25/28
R5 109 3
476
45
20
Part No. Material of roof conductor holder Length of brace (l1) Material of conductor holder Conductor holder support Rd Packing unit 108
mm mm pc(s)
Roof conductor holder for the fixing of air-termination conductors and down conductors
PLATTENsnap
for fixing at overlapping constructions, with DEHNsnap conductor holder, loose conductor leading
ZIEGELsnap
for fixing between flat tiles (pantiles) and plates, with DEHNsnap conductor holder, loose conductor leading
16
20
17
26
42
Part No. Material of roof conductor holder Clamping range Height of conductor holder Material of conductor holder Colour of conductor holder Conductor holder support Rd Packing unit
mm mm
mm pc(s)
Part No. Material of roof conductor holder Clamping range Height of conductor holder Material of conductor holder Colour of conductor holder Conductor holder support Rd Packing unit
25
21
16
20
26
Klemmbereich
7 80
Part No. Material of roof conductor holder Clamping range Height of conductor holder Material of conductor holder Conductor holder support Rd Packing unit
29
1.5
mm mm
mm pc(s)
mm mm mm pc(s)
www.dehn.de
109
for hooking into the bottom groove with DEHNgrip conductor holder
loose conductor leading
for hooking into the bottom groove with DEHNsnap conductor holder
loose conductor leading
20
R5.5 1
20 103
25
90
25
Part No. Material of roof conductor holder Length of brace Height of conductor holder (h1) Material of conductor holder Conductor holder support Rd Packing unit
mm mm mm pc(s)
Part No. Material of roof conductor holder Length of brace Height of conductor holder (h1) Material of conductor holder Colour of conductor holder Conductor holder support Rd Packing unit
mm mm
mm pc(s)
for hooking into the top groove with DEHNgrip conductor holder
loose conductor leading
50 87
Part No. Material of roof conductor holder Length of brace Height of conductor holder (h1) Material of conductor holder Conductor holder support Rd Packing unit
mm mm mm pc(s)
110
25
33
R9
20
36
www.dehn.de
R 5.5
20
t1
20
52
t1 R10
R 10
40
te
s ted
42
42
Part No. Material of roof conductor holder Material thickness (t1) Clamping range Type of conductor holder Material of conductor holder Conductor holder support Rd Conductor leading Screw Material screw/nut Standard Packing unit
mm mm
mm mm
pc(s)
223 010 StSt 2.5 20 clamping frame StSt 6-10 fixed e M8x25 StSt EN 50164-1 50
Part No. Material of roof conductor holder Material thickness (t1) Clamping range Type of conductor holder Height of conductor holder Material of conductor holder Conductor holder support Rd Conductor leading Screw Material screw/nut Packing unit
40
52
mm mm mm mm mm pc(s)
for roofing with clamping seam (e.g. RIB ROOF Speed 500 by Zambelli)
R5 3
21
18 27
22
40
44
te
42
s ted
Part No. Material of roof conductor holder Material thickness (t1) Clamping range Type of conductor holder Material of conductor holder Conductor holder support Rd Conductor leading Screw Material screw/nut Standard Packing unit
www.dehn.de
mm mm
mm mm
pc(s)
223 070 Al 3 approx. 18/22 clamping frame Al 6-10 fixed e M8x25 StSt EN 50164-1 50 111
Roof Conductor Holders for roofing with standing seam, with DEHNgrip
loose conductor leading
R5
45
16
45
47
2.5
47
42
te
s ted
37
37
42
Part No. Material of roof conductor holder Material thickness (t1) Clamping range Type of conductor holder Material of conductor holder Conductor holder support Rd Conductor leading Screw Material screw/nut Standard Packing unit
mm mm
mm mm
pc(s)
365 059 StSt 3 0.7-8 clamping frame StSt 6-10 fixed e M8x25 StSt EN 50164-1 50
Part No. Material of roof conductor holder Material thickness (t1) Clamping range Type of conductor holder Height of conductor holder Material of conductor holder Conductor holder support Rd Conductor leading Screw Material screw/nut Packing unit
mm mm mm mm mm pc(s)
223 031 StSt 2.5 0.7-8 DEHNgrip 20 StSt 8 loose e M8x25 StSt 50
2.5
R5
40
42
42 27 8.5
27 8.5
23
8.5 40
12 84
12 84
12
Part No. Material of roof conductor holder Material thickness (t1) Type of conductor holder Material of conductor holder Conductor holder support Rd Conductor leading Standard Packing unit
mm
mm
pc(s)
223 020 StSt 2.5 clamping frame StSt 6-10 fixed EN 50164-1 50
Part No. Material of roof conductor holder Material thickness (t1) Type of conductor holder Height of conductor holder Material of conductor holder Conductor holder support Rd Conductor leading Packing unit
mm mm mm pc(s)
112
8.5 40
40
2.5
20
16
20
www.dehn.de
with DEHNsnap
with DEHNgrip
36
32
67
67
Part No. Material of roof conductor holder Colour of roof conductor holder Material of conductor holder CH Conductor holder support Rd Height of conductor holder Colour of conductor holder Conductor leading Dimension Packing unit
mm mm
mm pc(s)
Part No. Material of roof conductor holder Colour of roof conductor holder Material of conductor holder CH Conductor holder support Rd Height of conductor holder Conductor leading Dimension Packing unit
mm mm mm pc(s)
Accessory for Roof Conductor Holders with adhesive pad Special cleanser
Clean the spot thoroughly with a cloth. One litre of this liquid is sufficient for approx. 500 to 1000 spots to be cleaned. Mind the instructions for use on the bottle. Dangerous goods regulations allow for transportation only in Germany and Austria. Alternatively use ISOPROPYL ALCOHOL 99,1 to 99,9% (CAS - NO. 67-63-0).
Part No. Cleanness Packing unit 297 199 99.1 - 99.9 % 1
www.dehn.de
113
66
4
31 20 50
80 70
60
20
10
100
Part No. Material of roof conductor holder Dimension Fixing Material of roof conductor holder Conductor holder support Rd Packing unit
mm mm mm pc(s)
Part No. Material of roof conductor holder Dimension Fixing Material of roof conductor holder Conductor holder support Rd Packing unit
mm mm mm pc(s)
M8 3
10 4
30 40
78 ca. 100
Part No. Material of roof conductor holder Dimension Fixing Packing unit
mm mm pc(s)
Part No. Material of roof conductor holder Colour Dimension Fixing Packing unit
mm mm pc(s)
114
15
www.dehn.de
Roof conductor holders for the installation of conductors on the ridge and on the roof surface Corrugations 177 mm (profile 5) and 130 mm (profile 8)
R4.5 2
20
20 42 18
20 42 18
17
17
9 28
116
116
Part No. Material of roof conductor holder Type of conductor holder Material of conductor holder Conductor holder support Rd Conductor leading Packing unit
mm pc(s)
Part No. Material of roof conductor holder Type of conductor holder Height of conductor holder Material of conductor holder Conductor holder support Rd Conductor leading Packing unit
28
mm mm pc(s)
2 88
70
4
22 8.5
30
20 9
17
20 72
21
45
16
Part No. Material of roof conductor holder Type of conductor holder Material of conductor holder Conductor holder support Rd Conductor leading Packing unit
28
mm pc(s)
Part No. Material of roof conductor holder Type of conductor holder Material of conductor holder Conductor holder support Rd Conductor leading Packing unit
8.5 25
26
37
mm pc(s)
20
58
22 8.5
22 8.5
8.5
25
8.5
21 58
21
Part No. Material of roof conductor holder Type of conductor holder Height of conductor holder Material of conductor holder Conductor holder support Rd Conductor leading Packing unit
mm mm pc(s)
Part No. Material of roof conductor holder Type of conductor holder Height of conductor holder Material of conductor holder Colour of conductor holder Conductor holder support Rd Conductor leading Packing unit
25
16
mm
mm pc(s)
www.dehn.de
116
www.dehn.de
Conductor Holders
screwless StSt holder system with loose conductor leading Easy installation: just push down the conductor Advantages: conductor is fixed in the DEHNgrip no further screwing required
Height 20 mm
Height 32 mm
33
45
32
20
1.5 20
20 20
1.5
26
7.8
Part No. Thread of conductor holder Bore of conductor holder Material of conductor holder Conductor holder support Rd Packing unit
Part No. Thread of conductor holder Bore of conductor holder Material of conductor holder Conductor holder support Rd Packing unit
26
7.8
20
43
14
40
Part No. Bore of conductor holder Material of conductor holder Conductor holder support Rd Screw Plastic dowel Packing unit
35
26
37
19
mm mm mm mm pc(s)
www.dehn.de
117
Conductor Holders
plastic holder system with loose conductor leading easy mounting: insert conductor laterally press down cap (self-locking) Advantages: conductor is held in a massive recess in the base body, thus no strain on the latch double cap locking (open with tool) straight loose conductor leading robust and weather-resistant design UV stabilized, halogen-free
34
16
R4
54
R4 36
25
Part No. 204 001 Thread of conductor holder M6 Material of conductor holder plastic Colour of conductor holder grey Conductor holder support Rd mm 8 Packing unit pc(s) 100
Part No. 204 003 Thread of conductor holder M6 Material of conductor holder plastic Colour of conductor holder grey Conductor holder support Rd mm 8 Packing unit pc(s) 100
25
34
16
16
40
25
40
Part No. Thread of conductor holder Material of conductor holder Colour of conductor holder Conductor holder support Rd Screw Packing unit
mm mm pc(s)
Part No. Thread of conductor holder Material of conductor holder Colour of conductor holder Conductor holder support Rd Screw Plastic dowel Packing unit
mm mm mm pc(s)
118
37
25
40
34
www.dehn.de
Conductor Holders
Conductor holder for the fixing of round conductors with slotted cleat, for fixed conductor leading For use with different materials e.g. Al, StSt, St/tZn and Cu
with female thread e.g. for round wire with plastic coating
R6.5
R5
1.5
1.5
1.5 38 52 20
18
20
1.5 20
26 40
Part No. Material of conductor holder Conductor holder support Rd Conductor holder support Fl Height of conductor holder Thread of conductor holder Packing unit
mm mm mm pc(s)
Part No. Material of conductor holder Conductor holder support Rd Height of conductor holder Thread of conductor holder Packing unit
18
20
mm mm pc(s)
with female thread premounted with screw, plastic base and dowel
1.5 35 26 40 37 14 16 R5
R5
1.5
1.5
14
16
26 40
35
18
Part No. Material of conductor holder Conductor holder support Rd Conductor holder support Fl Height of conductor holder Thread of conductor holder Packing unit
mm mm mm pc(s)
Part No. Material of conductor holder Conductor holder support Rd Conductor holder support Fl Height of conductor holder Thread of conductor holder Plastic base Screw Plastic dowel Packing unit
18
40
1.5
mm mm mm
mm mm pc(s)
www.dehn.de
119
Conductor Holders
7.5
mm mm
pc(s)
37
mm mm pc(s)
Plastic bases
for snapping onto the conductor holders DEHNgrip and DEHNhold
Part No. Height Diameter Material Colour Type Packing unit mm mm 276 016 10 35 plastic grey UV stabilized 100 276 017 10 35 plastic brown UV stabilized 100
14
20
8.5
35
pc(s)
46
5 10
38 58
Part No. Conductor holder support Rd Conductor holder support Fl Height of conductor holder Material of conductor holder Screw Plastic dowel Packing unit
mm mm mm mm mm pc(s)
40
120
37
20
37
www.dehn.de
Conductor Holders
Complete unit with flange for fixed conductor leading
with female thread e.g. for round wire with plastic coating
R6.5 3
20
30
28 42
38 58
Part No. Conductor holder support Rd Thread of conductor holder Height of conductor holder Material of cleat Material of base part Packing unit
mm mm
pc(s)
Part No. Conductor holder support Rd Thread of conductor holder Height of conductor holder Material of cleat Material of base part Packing unit
30
20
20
20
mm mm
pc(s)
R5
mm mm
40
mm mm pc(s)
28 42
30
20
34
20
h2
h1
34
Part No. Material of cleat Material of base part Colour of conductor holder Conductor holder support Rd Striking dowel Packing unit
mm mm pc(s)
28
18
www.dehn.de
121
Conductor Holders
R5 3 3 28 42
Part No. Conductor holder support Rd Conductor holder support Fl Material of cleat Material of base part Fixing (l1) Packing unit
mm mm
mm pc(s)
20
l1
3 l1
38 58
Part No. Conductor holder support Rd Conductor holder support Fl Material of cleat Material of base part Fixing (l1) Packing unit
20
Conductor holders for fixing of down conductors at walls with external thermal insulation composite system
20
28 42
Part No. Thickness of insulating material Bore depth Conductor holder support Rd Material of base part Material of cleat Height of conductor holder Screw of dowel Packing unit 122
mm mm mm
mm mm pc(s)
273 740 approx. 60 approx. 150 7-10 ZDC St/tZn 20 bl (TX40) 7x140 50
30
20
140/180/240
273 741 approx. 110 approx. 190 7-10 ZDC St/tZn 20 bl (TX40) 7x180 50
273 742 approx. 130 approx. 250 7-10 ZDC St/tZn 20 bl (TX40) 7x240 50
www.dehn.de
Conductor Holders
Conductor holder for wall mounting with locking screw M6, fixed conductor leading
Part No. Bore Material of conductor holder Conductor holder support Rd Height of conductor holder Screw Material of screw Packing unit 273 019 6.5 StSt 6-10 22 dj M6x20 StSt 50
R4 30 6.5 8 18 28 9 25
mm mm mm pc(s)
22 1
mm
DEHNQUICK
single-screw cleat with flexible clamping range and fixed conductor leading
R4.5 9
Clamping frame
single-screw cleat for clamping frames with flexible clamping range and fixed conductor leading
9
8.5/6.5
28
2.5
2/1.5
R5
16
12 29
18
9 33
Part No. Material of conductor holder Conductor holder support Rd mm Bore mm Packing unit pc(s)
Part No. Material of conductor holder Conductor holder support Rd Bore Packing unit
26
mm mm pc(s)
Part No. Conductor holder support Rd Material of conductor holder Conductor leading Fixing Clamping plate Packing unit
mm
mm mm pc(s)
36
20
70
www.dehn.de
123
Conductor Holders
Conductor holders for the installation of down conductors at downpipes with fixed conductor leading All types are suitable also for plastic downpipes.
Type PPS
with worm drive and bead
17
0.7/1
cla
in mp
an gr
ge
R4
12
Part No. Clamping range pipe Conductor holder support Rd Material of conductor holder Screw Material of grip head/screw Packing unit
mm mm mm pc(s)
200 079 80-100 8 StSt screw with worm drive SW7 StSt 50
200 077 80-100 8 StSt / gal Cu screw with worm drive SW7 StSt / gal Cu 50
200 089 100-120 8 StSt screw with worm drive SW7 StSt 50
200 087 100-120 8 StSt / gal Cu screw with worm drive SW7 StSt / gal Cu 50
Type PS
screwless, with embossments for tongs
clamping range 10 1 5 R4
60
30.5 12
10
Part No. Clamping range pipe Conductor holder support Rd Material of conductor holder Packing unit
mm mm pc(s)
Type PV
adjustable, with clamping screw M8
16
R4 36
22
14
0.3
clamping range
Part No. Clamping range pipe Conductor holder support Rd Material of conductor holder Screw Material of grip head/screw Packing unit
mm mm mm pc(s)
124
www.dehn.de
36
Part No. Conductor holder support Rd Material of conductor holder Screw Material of grip head/screw Packing unit
22
16
mm mm pc(s)
Part No. Material of conductor holder Dimension of strap (l x w x d) Length Packing unit
mm m pc(s)
20
21
1 26 67
1 26 67 50
20
25
20
28
38
Part No. Material of conductor holder Material of clamping part Conductor holder support Rd Packing unit
mm pc(s)
Part No. Material of conductor holder Material of clamping part Conductor holder support Rd Conductor holder support Fl Packing unit
25
21
mm mm pc(s)
R8
Part No. Material of conductor holder Material of clamping part Conductor holder support Rd Packing unit
mm pc(s)
1 26 67 52
20
38
25
21
www.dehn.de
125
Staples
Staples for fixing conductors e.g. at wooden masts etc.
4
Conductor Holders
R5
23
Part No. Material of conductor holder Conductor holder support Rd Conductor leading Packing unit
mm pc(s)
40
1.5
1.5
20
18
38 52
20
40
37
38 52
Part No. Material of conductor holder Conductor holder support Rd Height of conductor holder Thread of conductor holder Packing unit
mm mm pc(s)
Part No. Material of conductor holder Conductor holder support Rd Height of conductor holder Thread of conductor holder Screw Plastic dowel Packing unit
mm mm mm mm pc(s)
126
35
18
14
R8.5
1.5 16
www.dehn.de
Conductor Holders
Complete unit with flange for the installation of air-termination rods and earth entry rods, fixed conductor leading
R8.5 3
20
20
58
38 58
Part No. Conductor holder support Rd Thread of conductor holder Height of conductor holder Material of cleat Material of base part Packing unit
mm mm
pc(s)
Part No. Conductor holder support Rd Thread of conductor holder Height of conductor holder Material of cleat Material of base part Screw Plastic dowel Packing unit
30
38
20
30
20
40
41
mm mm
mm mm pc(s)
with pin
R8.5 3 3
20
l1
38 58
38 58
Part No. Material of cleat Material of base part Conductor holder support Rd Fixing (l1) Packing unit
mm mm pc(s)
Part No. Material of cleat Material of base part Conductor holder support Rd Fixing (l1) Packing unit
20
100
mm mm pc(s)
www.dehn.de
127
Conductor Holders
two-screw cleat with screws M6 Rod holder with flange (ZDC) and plastic dowel 10 mm
20 140/180
38 58
Part No. Thickness of insulating material Depth of bore Material of cleat Material o base part Height of conductor holder Conductor holder support Rd Screw/dowel Packing unit
mm mm
mm mm mm pc(s)
273 730 273 731 approx. 60 approx. 110 approx. 150 approx. 190 St/tZn St/tZn ZDC ZDC 20 20 16 16 bl (TX40) 7x140 bl (TX40) 7x180 50 50
R8
100
30
20
40
Part No. Material of cleat Material of base part Colour of conductor holder Conductor holder support Rd Impact dowel Packing unit
mm mm pc(s)
R8
28
22
6.5 8
29
Part No. Bore Material of conductor holder Height of conductor holder Conductor holder support Rd Screw Material of screw Packing unit
28
46
mm mm mm mm pc(s)
128
25
www.dehn.de
Conductor Holders
Flat strip holders for the fixing of flat conductors with slotted cleat, fixed conductor leading for use with different materials e.g. Al, StSt, St/tZn and Cu
1.5
14
1.5 16
37
1.5
40
18
38 52
35 18
38 52
Part No. Material of conductor holder Conductor holder support Fl Conductor holder support Rd Height of conductor holder Thread of conductor holder Screw Plastic dowel Packing unit
mm mm mm mm mm pc(s)
Part No. Material of conductor holder Conductor holder support Fl Conductor holder support Rd Height of conductor holder Thread of conductor holder Packing unit
20
1.5 20
mm mm mm pc(s)
www.dehn.de
129
Conductor Holders
20
10
45
14 l1
10
14 58
Part No. Height of conductor holder Conductor holder support Fl Material of conductor holder Dimension (l1) Packing unit
mm mm mm pc(s)
Part No. Height of conductor holder Conductor holder support Fl Material of conductor holder Screw Dimension (l1) Packing unit
mm mm mm mm pc(s)
with female thread with female thread, premounted with screw and dowel
3
20
40
33
30
38 58
38 58
Part No. Conductor holder support Fl Thread of conductor holder Height of conductor holder Material of cleat Material of base part Packing unit
mm mm
pc(s)
Part No. Conductor holder support Fl Thread of conductor holder Height of conductor holder Material of cleat Material of base part Screw Plastic dowel Packing unit
mm mm
mm mm pc(s)
130
30
20
20
20
20
10
www.dehn.de
Conductor Holders
Flat strip holder for wall mounting Thrust piece with screw M8 for the installation of strip conductor up to 11 mm and round conductor 6-10 mm
Wall distance 11 mm
27 15 11 12
60
R5.5 7 20
10
13 2.5
36
Part No. Material of conductor holder Wall distance Fixing Slot width Screw Material of screw Packing unit
mm mm mm mm pc(s)
30
Wall distance 15 mm
27 15
20 70 15 12 7 3 40
Part No. Material of conductor holder Wall distance Fixing Slot width Screw Material of screw Packing unit
mm mm mm mm pc(s)
40
mm pc(s)
40
32
www.dehn.de
131
Conductor Holders
This dowel is only suitable for the fixing of conductor holders, if there is no risk of any additional tensile forces acting on the down conductor. More details in installation instructions No. 1459.
Short design
Long design
17
1 TX40
TX40 25
50
Part No. Material Thickness of insulating material Length of anchoring depth Working load of Styrofoam PS20 Working load of rigid foam plates Packing unit
mm mm N N pc(s)
200 600 PA 60 50 35 60 50
Part No. Material Thickness of insulating material Length of anchoring depth Working load of Styrofoam PS20 Working load of rigid foam plates Packing unit
mm mm N N pc(s)
132
25
85
www.dehn.de
Clamps
Multipurpose connecting clamp for universal use as a cross clamp, T clamp and parallel clamp; two-part
MV Clamps
40
t1
te
s ted
40
Part No. Material of clamp Clamping range Rd Material thickness (t1 / t2) Screw Material of screw/nut Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm mm
390 079 StSt (V4A) 8-10 2.5 di M10x35 StSt (V4A) EN 50164-1 1.4 50
kA pc(s)
50
50
50
50
50
Part No. 390 079 with StSt (V4A) also for underground application
te
s ted
40
Part No. Material of clamp Clamping range Rd Material thickness (t1 / t2) Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
www.dehn.de
133
MV Clamps
with truss head screw
screw with rotation locking (square hole in the upper part)
t1 R4/R4.5/R5
Clamps
te
s ted
40
t1
40
Part No. Material of clamp Clamping range Rd Material thickness (t1 / t2) Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
Type of MV clamp St/tZn Part No. 390 060 with StSt screw Part No. 390 060/S Id. No. 045137 upon request
t2
R4/R5
44
te
s ted
48
s ted
48
Part No. Material of clamp Clamping range Rd Material thickness (t1 / t2) Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
Part No. Material of clamp Clamping range Rd Material thickness (t1 / t2) Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
44
Bimetallic MV clamp
for the connection of conductors made of different materials, with intermediate plate (Cupal) and threaded base part
1.5 3 R4 40 40 3 R5
Part No. Material of clamp Clamping range Rd Material thickness (t1 / t2) Screw Material of screw/nut Packing unit 134
mm mm mm pc(s)
Clamps
Mini multipurpose connecting clamp for universal use as a cross clamp, T clamp and parallel clamp, with rotation locking
MMV Clamps
MMV Clamp
R5
2.5 1.5 35 28
2.5
2.5
28
33
te
30
s ted
te
s ted
33
Part No. Material of clamp Clamping range Rd Material thickness Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
Part No. Material of clamp Clamping range Rd Material thickness Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
MAXI MV Clamps
Maxi multipurpose connecting clamp for universal use as a cross clamp, T clamp and parallel clamp; three-part, with thread in the base part
R13 16 3 R8
Part No. Material of clamp Clamping range Rd Material thickness Screw Material of screw Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Approval Packing unit Stock No.
www.dehn.de
mm mm mm
308 041 St/tZn 8-16 / 15-25 3.0 / 2.0 di M12x65 St/tZn EN 50164-1 6.2 20 5999-12-362-1557
308 040 St/bare 8-16 / 15-25 3.0 / 2.0 di M12x65 St/bare EN 50164-1 6.2 UL467B 20
75 75
kA pc(s)
16
te
s ted
135
Clamps
R5
28
te
s ted
33
Part No. Material of clamp Clamping range Rd Material thickness Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
26
KS Connectors
Clamping screw connector for lightning current carrying capable connection of round conductors e.g. to flat profiles, downpipe clamps or other parts of the lightning protection system
one-part St/tZn
with screw and nut M10
40 R5
one-part Cu
with screw and nut M10
11
R5
13
te
25
te
s ted
s ted
Part No. KS screw Material of clamp Clamping range Rd Type Material of nut Standard Packing unit
mm
pc(s)
301 010 St/tZn ZDC 7-10 + spring washer St/tZn EN 50164-1 100
Part No. KS screw Material of clamp Clamping range Rd Connection (single-wire/multi-wire) Type Material of nut Standard Packing unit
mm mm2
pc(s)
136
25
40
www.dehn.de
KS Connectors
heavy design
with screw and nut M12
R6.5 6 12
40
10
48
te
te
s ted
22
s ted
30
Part No. KS screw Material of clamp Clamping range Rd Connection (single-wire/multi-wire) Type Material of nut Standard Packing unit
mm mm2
301 019 StSt StSt 6-10 25 - 70 + spring washer StSt EN 50164-1 100
Part No. KS screw Material of clamp Clamping range Rd Connection (single-wire/multi-wire) Material of nut Standard Packing unit
30
mm mm2
pc(s)
pc(s)
two-part distance 30 mm
with screw and nut M10, distance 30 mm
two-part distance 40 mm
with screw and nut M10, distance 40 mm
=
te
s ted
te
s ted
R5
R5.5
40 12
30
30 55
25
40 63
Part No. KS screw Material of clamp Clamping range Rd Material of nut Standard Packing unit
mm
pc(s)
Part No. KS screw Material of clamp Clamping range Rd Type Material of nut Standard Packing unit
mm
pc(s)
www.dehn.de
137
Connectors
connection of round conductors for T arrangement and longitudinal arrangement
Clamps
EST connector
one-screw T connector
R4 22
ES connectors
one-screw connectors for longitudinal arrangement
R4
te
s ted
te
s ted
27
49
27
20
60
Part No. Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm
pc(s)
Part No. Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm
pc(s)
310 008
Universal Connector
R5
=
te
R5 8
connection of round conductors for cross connections, T connections, parallel connections and double conductor connections
Part No. Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit 315 119 StSt 8-10 e M10x35 StSt EN 50164-1 50
mm mm
34
s ted
pc(s)
138
www.dehn.de
Clamps
connection of two conductors in parallel arrangement
Parallel Connectors
3/4
46
40
te
s ted
37
56
te
s ted
Part No. Material of clamp Clamping range Rd/Rd Screw Material of screw/nut Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm
306 029 StSt (V4A) 7-10 e M10x35 StSt (V4A) EN 50164-1 2.9 50
kA pc(s)
50
Part No. Material of clamp Clamping range Rd/Rd Screw Material of screw/nut Standard Military name Packing unit Stock No.
307 000 St/tZn mm 7-10 mm di M8x20 St/tZn EN 50164-1 VG 96953 T06 D0002 pc(s) 50 5999-12-158-2303
mm mm
kA pc(s)
50
39
te
s ted
R6
40
42
50
s ted
te
52
s ted
Part No. Material of clamp Clamping range Rd/Rd Clamping range (stranded or cable) Screw Material of screw/nut Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm2 mm
kA pc(s)
Part No. Material of clamp Clamping range Rd/Rd Clamping range (stranded or cable) Screw Material of screw/nut Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm2 mm
kA pc(s)
www.dehn.de
139
Connecting Sleeves
Clamps
Connecting sleeves for longitudinal connection of two round conductors with four screws M6
ZDC 8
ZDC 7-10
14
te
16
te
s ted
s ted
17
75
75
11
Part No. Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm
pc(s)
Part No. Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm
pc(s)
Al 8
Cu 8
16
te
13
te
s ted
s ted
75
10
75
Part No. Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm
pc(s)
Part No. Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm
pc(s)
s ted
Using the connecting sleeve requires an additional fixing of the air-termination rod above the sleeve.
Part No. Material Clamping range Rd / Rd Screw Material of screw Outer Standard Packing unit 385 216 Al 16 / 16 di M8x12 StSt 28 EN 50164-1 10
18
17
mm mm mm pc(s)
42 90
42
28
140
15
20
www.dehn.de
Clamps
Cross units for aboveground connection of conductors in cross arrangement and T arrangement
Part No. Material of clamp Clamping range Rd / Rd Clamping range Rd / Fl Clamping range Fl / Fl Screw Material of screw Dimension (l x w x d) Standard Packing unit
mm pc(s)
50
39
mm mm mm mm
314 300 St/tZn 8-10 / 8-10 8-10 / 30 30 / 30 dj M6x20 StSt 50x50x2.5 EN 50164-1 50
te
s ted
2.5 2.5
R5
39 50
Part No. Material of clamp Clamping range Rd / Rd Clamping range Rd / Fl Clamping range Fl / Fl Screw Material of screw Dimension (l x w x d) Standard Packing unit
mm mm mm mm mm pc(s)
314 310 St/tZn 8-10 / 8-10 8-10 / 30 30 / 30 dj M6x20 StSt 50x50x2.5 EN 50164-1 50
s ted
2.5
R5
50 39
39 50
s ted
Part No. Material of clamp Clamping range Rd / Rd Clamping range Rd / Fl Screw Material of screw Dimension (l x w x d) Standard Packing unit
mm pc(s)
50 39
mm mm mm
2.5 2.5
R8
39 50
www.dehn.de
141
Clamps
Cross units for aboveground and underground connection of conductors in cross arrangement and T arrangement Type StSt (V4A) especially for Fl 30 mm and Rd 8-10 mm with intermediate plate (dimension 60x60 mm) Part No. 319 209/S Id.No. 040332 available on request
R5
R5
60
40
te
s ted
40 60
Part No. Material of clamp Clamping range Rd / Rd Clamping range Rd / Fl Clamping range Fl / Fl Clamping range (stranded/cable) Screw Material of screw/nut Dimension (l x w x d) Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm mm mm2 mm mm kA pc(s)
319 201 St/tZn 8-10 / 8-10 8-10 / 30 30 / 30 di M8x25 St/tZn 60x60x3 EN 50164-1 14 25
319 207 Cu 8-10 / 8-10 8-10 / 30 30 / 30 50-70 di M8x25 StSt 60x60x4 EN 50164-1 29 25
R5
319 209 StSt (V4A) 8-10 / 8-10 8-10 / 30 30 / 30 50-70 di M8x25 StSt (V4A) 60x60x3 EN 50164-1 7 25
te
s ted
70
49
49 70
Part No. Material of clamp Clamping range Rd / Rd Clamping range Rd / Fl Clamping range Fl / Fl Clamping range (stranded/cable) Screw Material of screw/nut Dimension (l x w x d) Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
321 045 St/tZn mm mm mm mm2 mm mm kA pc(s) 8-10 / 30-40 30-40 / 30-40 di M8x30 St/tZn 70x70x3 EN 50164-1 12.6 25
321 047 Cu 8-10 / 30-40 30-40 / 30-40 50-70 di M8x30 StSt 70x70x3 EN 50164-1 35.1 25
319 229 StSt (V4A) 7-10 / 7-10 7-10 / 30-40 30-40 / 30-40 35-70 di M8x30 StSt (V4A) 70x70x3 EN 50164-1 5.0 25
142
www.dehn.de
Clamps
R5
60
40
te
s ted
40 60
Part No. Material of clamp Clamping range Rd / Rd Clamping range Rd / Fl Clamping range (stranded/cable) Screw Material of screw/nut Dimension (l x w x d) Standard Packing unit
mm mm mm2 mm mm pc(s)
319 219 StSt (V4A) 8-10 / 16 16 / 30 50-70 di M8x25 StSt (V4A) 60x60x3 EN 50164-1 25
3 60 40 3
te
s ted
40 60
Part No. Material of clamp Clamping range Rd / Rd Clamping range Rd / Fl Clamping range Fl / Fl Clamping range (stranded/cable) Screw Material of screw/nut Dimension (l x w x d) Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
318 209 StSt (V4A) 8-10 / 30 30 / 30 50-70 di M8x25 StSt (V4A) 60x60x3 EN 50164-1 7.0 25
318 251 St/tZn 8-10 / 8-10 8-10 / 30 30 / 30 di M8x25 St/tZn 60x60x3 EN 50164-1 14 25
318 219 StSt (V4A) 8-10 / 8-10 8-10 / 30 30 / 30 50-70 di M8x25 StSt (V4A) 60x60x3 EN 50164-1 7 25
kA pc(s)
www.dehn.de
143
Clamps
40
60
te
s ted
te
40 60
s ted
70
49
49 70
Part No. Material of clamp Clamping range Fl / Fl Screw Material of screw/nut Dimension (l x w x d) Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm mm
318 233 StSt (V4A) 30 / 30 di M8x25 StSt (V4A) 60x60x3 EN 50164-1 7.0 25
kA pc(s)
Part No. Material of clamp Clamping range Fl / Fl Screw Material of screw/nut Dimension (l x w x d) Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm mm
320 044 St/tZn 30-40 / 30-40 di M8x30 St/tZn 70x70x3 EN 50164-1 12.6 25
kA pc(s)
R8
te
s ted
3 3
R5
60
40
40 60
Part No. Material of clamp Clamping range Rd / Rd Clamping range Rd / Fl Screw Material of screw/nut Dimension (l x w x d) Standard Packing unit
mm mm mm mm pc(s)
144
www.dehn.de
Clamps
SV clamps for cross connections and T connections, screw with rotation locking thread shaft
R4
30
t1
l1
308 220308 229308 320308 329
te
s ted
Part No. Material of clamp Clamping range Rd / Rd Clamping range Rd / Fl Clamping range Fl / Fl Screw Material of screw/nut Dimension (l1 x t1) Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm mm mm mm
308 220 St/tZn 7-10 / 7-10 7-10 / 30 30 / 30 e M10x30 St/tZn 94x4 EN 50164-1 7.3 25
308 229 StSt (V4A) 7-10 / 7-10 7-10 / 30 30 / 30 e M10x30 StSt (V4A) 94x3 EN 50164-1 3.2 25
308 320 St/tZn 7-10 / 7-10 7-10 / 30-40 30-40 /30-40 e M10x30 St/tZn 108x4 EN 50164-1 9.6 25
308 329 StSt (V4A) 7-10 / 7-10 7-10 / 30-40 30-40 /30-40 e M10x30 StSt (V4A) 108x3 EN 50164-1 3.2 25
kA pc(s)
R4
30
94
308 249
te
30
t1
s ted
94
te
s ted
Part No. Material of clamp Clamping range Rd / Fl Screw Material of screw/nut Dimension (l1 x t1) Standard Packing unit
mm mm mm pc(s)
308 249 StSt (V4A) 7-10 / 30 e M10x30 StSt (V4A) 94x3 EN 50164-1 25
Part No. Material of clamp Clamping range Fl / Fl Screw Material of screw/nut Dimension (l1 x t1) Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm mm
308 239 StSt (V4A) 30 / 30 e M10x30 StSt (V4A) 94x3 EN 50164-1 3.9 25
kA pc(s)
R4
Part No. Material of clamp Clamping range Rd / Rd Clamping range Rd / Fl Screw Material of screw/nut Dimension (l1 x t1) Standard Packing unit
mm mm mm mm pc(s)
R8
30
t1
108
te
s ted
www.dehn.de
145
Clamps
R5
R5
3 R5 R5
30
te
s ted
60 83
te
s ted
60 83
Part No. Material of clamp Clamping range Rd / Rd Clamping range Rd / Fl Clamping range Fl / Fl Screw Material of screw Standard Packing unit
mm mm mm mm
pc(s)
Part No. Material of clamp Clamping range Rd / Rd Clamping range Rd / Fl Clamping range Fl / Fl Screw Material of screw Standard Packing unit
mm mm mm mm
pc(s)
30
308 060
308 070
146
www.dehn.de
Clamps
Clamps for the connection to steel constructions and steel sheets
Terminal Clamps
longitudinal connection
R5 21
58
47
5 15
te
36
s ted
11
45
27
te
s ted
371 008
Part No. Clamping range Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
Part No. Clamping range Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
20
54
41
56 43
18
16 30
14 29
te
s ted
22 45
28 21
26
18 33
te
s ted
14
R5.5
14
R5.5
370 014
370 018
Part No. Clamping range Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
Part No. Clamping range Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
www.dehn.de
147
Clamps
30 53 75
3-18/18-35
Part No. Clamping range Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
10
s ted
20
te
45
63
R5
te
s ted
30 53 75
3-18/18-35
Part No. Clamping range Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
10
20
25
te
s ted
45
30 53 75
3-18/18-35
Part No. Clamping range Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit 148
mm mm mm
pc(s)
10
20
63
R5
30 53 75 3-18/18-35
Part No. Clamping range Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
10
20
25
te
s ted
Small design
longitudinal or cross connection
Part No. Clamping range Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit 372 018 5-18 St/tZn 6-10 di M10x35 StSt EN 50164-1 25 372 019 5-18 StSt 6-10 di M10x35 StSt EN 50164-1 25
1.5
15
mm mm mm
R5.5 10
te
s ted
13
19
21 40
4 24
pc(s)
Large design
longitudinal or cross connection
Part No. Clamping range Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit 372 035 18-35 St/tZn 6-10 di M10x35 StSt EN 50164-1 25 372 039 18-35 StSt 6-10 di M10x35 StSt EN 50164-1 25
1.5
15
te
51
s ted
R5.5
mm mm mm
10
13
36
21 40
4 24
pc(s)
68
www.dehn.de
149
Saddle Clamps
Clamps
Clamps for connecting conductors to flanges of the same or other materials
31
t1
s ted
3
2.5 9 30 32
Part No. Clamping range of flange Material of clamp Material thickness (t1) Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm mm mm
pc(s)
39
R4.5
te
34
s ted
24
3
30 32
Part No. Clamping range of flange Material of clamp Material thickness (t1) Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm mm mm
pc(s)
150
39
www.dehn.de
Saddle Clamps
with two-screw cleat e.g. for standing seams
longitudinal or crosswise conductor leading
2.5 21 5 32
R5
28
64
16 32
12
7
te
28
s ted
6 11 R5
te
s ted
Part No. Clamping range of flange Material of clamp Material thickness (t1) Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm mm mm
pc(s)
Part No. Clamping range of flange Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
33
59
59
12
17
28
39
2.5 17 12
47
10.5
te
20
s ted
28 47
10.5
te
s ted
R5
Part No. Clamping range of flange Material of clamp Material thickness (t1) Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm mm mm
pc(s)
Part No. Clamping range of flange Material of clamp Material thickness (t1) Clamping range Rd Screw Material of screw/nut Standard Packing unit
mm mm mm mm
pc(s)
39
13
2.5 1.5
30 32
2.5 1.5
30 32
Part No. Clamping range of flange Material of clamp Clamping range Rd Screw Material of screw/nut Standard Packing unit
www.dehn.de
mm mm mm
pc(s)
Part No. Clamping range of flange Material of clamp Clamping range Rd Screw Material of screw/nut Packing unit
13
te
s ted
39
mm mm mm pc(s)
151
Clamps
Type angled
longitudinal or cross connection
R5
16
47
te
s ted
37
Part No. Clamping range of seam Material of clamp Clamping range Rd Screw Material of screw/nut Material thickness (t1 / t2) Standard Packing unit
mm mm mm mm pc(s)
2.5/3 42
45
Type straight
longitudinal or crosswise connection
9 6 R4/R5 26 2.5/3 2.5/3 40 55
te
45
2.5/3
s ted
Part No. Clamping range of seam Material of clamp Clamping range Rd Screw Material of screw/nut Material thickness (t1 / t2) Standard Packing unit 152
mm mm mm mm pc(s)
18
48
Clamps
Clamps for connecting conductors to gutters of the same or of different materials
Gutter Clamps
40 16 16
28 17 9 42
33
R5
t1
26 28
te
R9
s ted
Part No. Clamping range of bead Material of clamp Clamping range Rd Material of cleat Width / material thickness (t1) Screw Material of screw Standard Packing unit
mm mm mm mm
pc(s)
40 16
28 17 8
34 42
R4.5
te
s ted
32
t1
3 R9
Part No. Clamping range of bead Material of clamp Clamping range Rd Material of cleat Width / material thickness (t1) Screw Material of screw Standard Packing unit
mm mm mm mm
pc(s)
Type bimetallic for gutters Cu with clamping frame (St/tZn) and intermediate plate (Cupal)
40 16 16 26 16 9 2.5
Type bimetallic for gutters Cu with double cleat (St/tZn) and intermediate plate (Cupal)
40 16 16 28 16 1.5 3
33
42
53 45
53 45
34
42
R5
R4.5
2
te
2
26 28 R9
1.5
s ted
8 R9
te
32
s ted
Part No. Clamping range of bead Material of clamp Clamping range Rd Screw Material of screw Standard Packing unit
www.dehn.de
mm mm mm
pc(s)
Part No. Clamping range of bead Material of clamp Clamping range Rd Screw Material of screw Standard Packing unit
mm mm mm
pc(s)
Gutter Clamps
with two-screw cleat width 40 mm
longitudinal conductor leading
R5 28 75 28
Clamps
t1 3
57 43
R3
te
s ted
40
22
13
Part No. Clamping range of bead Material of clamp Clamping range Rd Material of cleat Width / material thickness (t1) Screw Material of screw Standard Packing unit
mm mm mm mm
pc(s)
338 000 13-25 St/tZn 7-10 St/tZn 40 / 3 dm M6x16 / M6x10 StSt EN 50164-1 25
338 009 13-25 StSt 7-10 StSt 40 / 2,5 dm M6x16 StSt EN 50164-1 25
2.5
te
s ted
R10 23 15
Part No. Clamping range of bead Material of clamp Clamping range Rd Material of cleat Width / material thickness (t1) Screw Material of screw Standard Packing unit
mm mm mm mm
pc(s)
339 010 13-25 St/tZn 7-10 St/tZn 60 / 2,5 dj M6x20 StSt EN 50164-1 25
61
44 36
24
28
32
32
9 2.5 R4 40
40 3
8 R4
R5
te
R4.5
te
s ted
37
s ted
37
Part No. Clamping range of bead Material of clamp Clamping range Rd Width Screw Material of screw Standard Packing unit 154
mm mm mm mm
pc(s)
Part No. Clamping range of bead Material of clamp Clamping range Rd Width Screw Material of screw Standard Packing unit
mm mm mm mm
pc(s)
32
Clamps
Clamps for connecting conductors to gutter boards, longitudinal connection with two-screw cleat
R5
90 28
28
20 2
50
14
28
te
s ted
35
Part No. Clamping range Material of clamp Width Clamping range Rd Screw Material of screw Standard Packing unit
mm mm mm mm
pc(s)
Clamping Bushes
Clamping bushes for connecting conductors to construction parts
with bore
40 R4/5
with screws
15 11.5
te
19
=
s ted
43
23
38
10.5
14
12
11
28
mm mm pc(s)
Part No. Clamping range Rd Material Fixing bore Screw Material of screw Standard Packing unit
mm mm mm
pc(s)
www.dehn.de
155
Terminal Brackets
Terminal brackets for connecting metal sheaths by blind rivets or screws
Clamps
te
s ted
Part No. Material of bracket Material thickness (t1) Fixing Standard Packing unit
mm mm pc(s)
30
=
te
s ted
te
s ted
R5
27
27
51 3
51 3 16 81
5.2 12 6.5 20 28 8
81
5.2 12
6.5
30
18
32
16
20 28
Part No. Material of bracket Material thickness (t1) Fixing Material of clamping frame Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
377 100 Al 3 [4x] 5.2 / [2x] 6.5 St/tZn e M10x30 StSt EN 50164-1 50
Part No. Material of bracket Material thickness (t1) Fixing Material of double cleat Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
156
18
18
www.dehn.de
Clamps
Rod clamps for connecting air-termination rods to conductors for longitudinal connection of all conductor materials for cross connection (crosswise arrangement) only of St/tZn and StSt
Rod Clamps
45
17 30
28 R4 3/4 25
te
s ted
Part No. Material of clamp Clamping range Rd / Rd Screw Material of screw Standard Packing unit
mm mm
pc(s)
with hexagon screw, spring washer and thread in the base part
R8 t1
t2
R4/R5
44
te
44
s ted
te
s ted
48
48
Part No. Material of clamp Clamping range Rd Material thickness (t1 / t2) Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
Part No. Material of clamp Clamping range Rd Material thickness (t1 / t2) Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
www.dehn.de
157
FS Clamps
Clamps
for connecting air-termination rods/spikes with one or two conductors with special pressure disk for longitudinal and crosswise connection connection of two conductors provides a better distribution of the lightning current, thus the separation distance can be reduced
=
te
=
s ted
te
s ted
51 44
8 6
51 40
26
26
18
3 13 8 55
R8 19
3 55
R5
R5
Part No. Material of clamp Clamping range of air-termination spike Clamping range Rd Screw Material of screw/nut Material of pressure disk Standard Packing unit
pc(s)
Part No. Material of clamp Clamping range of air-termination rod Clamping range Rd Screw Material of screw/nut Material of pressure disk Standard Packing unit
pc(s)
158
18
R5
48
51
www.dehn.de
Expansion Pieces
Round design
for connection e.g. with MV clamp (Part No. 390 051)
395
66 158
66
te
s ted
mm mm pc(s)
Flat design
for connection e.g. with KS connector (Part No. 301 000) Note: At crossing points two expansion pieces may be connected with one screw M10x20 mm and nut.
58
50
11 30
te
s ted
22 170
Part No. Material Dimension Length Fixing Central bore Standard Packing unit
mm mm mm mm pc(s)
www.dehn.de
159
Bridging Brackets
te
s ted
te
s ted
58
58
50
50
28
5.2
28
5.2
28/30
18
18
12
20
11 170
6.5
12
20 170
30
6.5
Part No. Material Dimension Length Fixing Central bore Standard Packing unit
mm mm mm mm pc(s)
377 006 377 027 Al Cu 30x2 28x2 170 170 [8x] 5.2 / [4x] 6.5 [8x] 5.2 / [4x] 6.5 11 11 EN 50164-1 EN 50164-1 50 50
mm mm mm pc(s)
58
50
28
5.2
18
te
s ted
12
20
30
11 220
6.5
Part No. Material Dimension Length Fixing Central bore Standard Packing unit 160
mm mm mm mm pc(s)
Bridging Braids
Short design
te
s ted
te
s ted
10.5
5.2
10.5
6.5
33
16
16
33 18
18
23
4/5
180
35
35
35 180
35
Part No. Material Length Cross section Fixing Fixing possibility Standard Packing unit
377 015 377 007 Al Cu mm 180 180 mm2 50 50 mm [8x] 5.2 / [2x] 10.5 [8x] 5.2 / [2x] 10.5 blind rivets/screws blind rivets/screws EN 50164-1 EN 50164-1 pc(s) 10 10
Part No. Material Length Cross section Fixing Fixing possibility Standard Packing unit
mm mm2 mm
pc(s)
377 045 Al 180 50 [4x] 6.5 / [2x] 10.5 drilling screws/screws EN 50164-1 100
10.5
33
10.5
5.2
16
te
18 35 30 300 35
s ted
Part No. Material Length Cross section Fixing Central bore Fixing possibility Standard Packing unit
www.dehn.de
4/5
mm mm2 mm mm
pc(s)
377 115 Al 300 50 [8x] 5.2 / [3x] 10.5 10.5 blind rivets/screws EN 50164-1 10
377 107 Cu 300 50 [8x] 5.2 / [3x] 10.5 10.5 blind rivets/screws EN 50164-1 10 161
16
Bridging Cables
16
l1
te
s ted
21.5
21
10.5
6.5
Part No. Length (l1) Material of cable lug Material of cable Cross section Fixing Insulation Standard Packing unit
mm
mm2 mm
pc(s)
377 210 200 Al Cu 16 [4x] 6.5 / [2x] 10.5 rubber EM5 black EN 50164-1 10
377 310 300 Al Cu 16 [4x] 6.5 / [2x] 10.5 rubber EM5 black EN 50164-1 10
377 410 400 Al Cu 16 [4x] 6.5 / [2x] 10.5 rubber EM5 black EN 50164-1 10
377 510 500 Al Cu 16 [4x] 6.5 / [2x] 10.5 rubber EM5 black EN 50164-1 10
Drilling Screw
Drilling screw self-tapping with hexagon head and collar for connecting bridging brackets or cables with the metal capped parapet (at materials > 2 mm thick)
6.3
19
SW10
mm
pc(s)
162
www.dehn.de
55 R8 18
3
2.5
400
te
40
s ted
2.5
R5
Part No. Clamping range of seam Material of saddle clamps Length Material of cable Cross section Standard Packing unit
mm mm mm2 pc(s)
cable 8 R5 4
te
s ted
12
21
22
50
52 47
1000
Part No. Clamping range of connection lug Material of connection lug Clamping range of clamping frame Material of clamping frame Length Material of rope Cross section Temperature range Type of cable Insulation Standard Packing unit
www.dehn.de
mm mm mm mm2 C
pc(s)
365 519 8 (design 7x7/7x19) StSt Rd 6-10 StSt 1000 Cu 16 -40 to +80 flexible rubber EM5 black EN 50164-1 1 163
Cupal Sleeves
Sleeves for corrosion-resistant connection between steel or aluminium and copper
Part No. Material outside Material inside Cross section Length Packing unit
mm2 mm pc(s)
Part No. Material outside Material inside Cross section Length Packing unit
mm2 mm pc(s)
Cupal Sheets
Metal strips for corrosion-resistant connection between steel or aluminium and copper
mm pc(s)
164
www.dehn.de
Test Joints
Disconnecting sleeves for connecting down conductors to the earth entries
Disconnecting Sleeves
27.5
41
R5.5
28 R5
17.5
40
te
s ted
17
40
te
s ted
Part No. Material Clamping range Rd / Rd Screw Material of screw Standard Packing unit
mm mm
pc(s)
Part No. Material Clamping range Rd / Rd Screw Material of screw Standard Packing unit
mm mm
pc(s)
17
20
27.5
41
R5.5
21
17.5
43
te
s ted
R4
30
11
40
te
s ted
Part No. Material Clamping range Rd / Rd Screw Material of screw Standard Packing unit
mm mm
pc(s)
Part No. Material Clamping range Rd / Rd Screw Material of screw Standard Packing unit
mm mm
pc(s)
www.dehn.de
165
Test Joints
Type bimetallic for two round conductors Cu and St/tZn or StSt (V4A)
R5 1.5 3 R5
R5
t1
30
te
40
s ted
58
te
s ted
40 58
Part No. Material Clamping range Rd / Rd Screw Material of screw Screw distance Material thickness (t1) Standard Packing unit
mm mm mm mm pc(s)
Part No. Material Clamping range Rd / Rd Screw Material of screw Screw distance Packing unit
mm mm mm pc(s)
Type bimetallic for round conductor Cu and flat conductor St/tZn or StSt (V4A)
R5 1.5 3 3
te
2.5
30
te
s ted
40 58
s ted
40 58
Part No. Material Clamping range Rd / Fl Screw Material of screw Screw distance Material thickness (t1) Standard Packing unit
mm mm mm mm pc(s)
Part No. Material Clamping range Rd / Fl Screw Material of screw Standard Packing unit
mm mm
pc(s)
Type bimetallic for round conductor Cu and earth entry rod St/tZn or StSt (V4A)
R5 1.5 3 R8
te
2.5
R8
30
40
te
s ted
58
s ted
40 58
Part No. Material Clamping range Rd / Rd Screw Material of screw Screw distance Material thickness (t1) Standard Packing unit
mm mm mm mm pc(s)
Part No. Material Clamping range Rd / Rd Screw Material of screw Standard Packing unit
mm mm
pc(s)
30
30
30
www.dehn.de
Test Joints with intermediate plate for two round conductors, small design
3 R5 3
R5 3
R8
30
30 50
te
s ted
30 50
30
te
s ted
Part No. Material Clamping range Rd / Rd Screw Material of screw Distance of screws Material thickness (t1) Standard Packing unit
mm mm mm mm pc(s)
Part No. Material Clamping range Rd / Rd Screw Material of screw Distance of screws Material thickness (t1) Standard Packing unit
mm mm mm mm pc(s)
R5
t1 30
40 58
te
s ted
te
s ted
Part No. Material Clamping range Rd / Rd Screw Material of screw Distance of screws Material thickness (t1) Standard Packing unit
mm mm mm mm pc(s)
Part No. Material Clamping range Rd / Fl Screw Material of screw Distance of screws Material thickness (t1) Standard Packing unit
mm mm mm mm pc(s)
R5
t1
s ted
Part No. Material Clamping range Rd / Rd Screw Material of screw Distance of screws Material thickness (t1) Standard Packing unit
www.dehn.de
mm mm mm mm pc(s)
ES Disconnecting Clamp
Single-screw design for connecting down conductors to earth entries
R5 20 R4
Test Joints
te
s ted
27
60
Part No. Material Clamping range Rd / Rd Screw Material of screw/nut Standard Packing unit
mm mm
pc(s)
16
44
16 23
te
s ted
Part No. Material Clamping range Rd / Rd Screw Material of screw/nut Standard Packing unit
mm mm
pc(s)
70 50
R5
35 9.5 2.5
60 15
35 2.5
te
s ted
3 136
Part No. Material Clamping range Rd / Fl Screw Material of screw/nut Insulating piece Standard Packing unit
mm mm
pc(s)
453 100 St/tZn 8-10 / 30-40 di M8x16/M8x20 StSt plastic grey EN 50164-1 10
Test Joints
Two-part or three-part connection system with thread in the base part
R5
40
te
40
R4
50 70
s ted
te
s ted
50 70
Part No. Material Clamping range Rd / Fl Screw Material of screw Standard Packing unit
mm mm
pc(s)
Part No. Material Clamping range Rd / Fl Screw Material of screw Standard Packing unit
mm mm
pc(s)
6 54
s ted
Part No. Material Clamping range Fl / Fl Screw Material of screw Standard Packing unit
mm mm
pc(s)
s ted
Part No. Material Clamping range Rd / Fl Screw Material of screw Shield Standard Packing unit
www.dehn.de
mm mm
pc(s)
109 35
29
50 70 9 55
2.5
169
Test Joints
Test joint boxes for underfloor mounting to disconnect the down conductor from the earth-termination system for measuring purposes More details in installation instructions No. 1718
65 45 220 30 R5 85
3 8
s ted
Part No. Material Colour Dimension (l x w x h) Clamping range Rd / Fl Standard Max. permissible load Material of test joint Packing unit
mm mm kg/cm2 pc(s)
549 001 GCI black (varnished) 240x160x120 7-10 / 30-40 EN 50164-5 40 StSt 1
220
8 23
Part No. Material Colour Dimension (l x w x h) Standard Max. permissible load Packing unit
mm kg/cm2 pc(s)
170
160
23
te
65
50
www.dehn.de
Test Joints Type Plastic with integrated, easily accessible test joint
detachable with a key, with integrated terminal for the connection of the down conductor and earthing conductor, open at the bottom
24
115
204
te
s ted
4
121
4 67 R5 197
40
Part No. Material Colour Dimension (l x w x h) Clamping range Rd / Fl Standard Max. permissible load Material of test joint Packing unit
85
mm mm kg/cm2 pc(s)
50
30
197
187
204
Part No. Material Colour Dimension (l x w x h) Standard Max. permissible load Packing unit
mm kg/cm2 pc(s)
www.dehn.de
171
Test Joints
detachable with a key, with integrated terminal for the connection of the down conductor and earthing conductor, open at the bottom (without bottom)
17
55
65 3
te
s ted
R5 50 30
Part No. Material Dimension (l x w x h) Clamping range Rd / Fl Standard Max. permissible load Material of test joint Packing unit
mm mm kg/cm2 pc(s)
105
85
45
150
93
154
5 16
200
164
Part No. Material Dimension (l x w x h) Standard Max. permissible load Packing unit
mm kg/cm2 pc(s)
172
103
200
www.dehn.de
Test Joints
Test joint boxes for flush mounting and for concrete structures with integrated test joint with symbol for concrete constructions
72
68
te
s ted
140
200
200
Part No. Material of box Dimension of box (l x w x h) mm Material of cover Dimension of cover (l x w) mm Standard Packing unit pc(s)
160
72
68
10
10.5
10.5
te
s ted
190
190
140
Part No. Material of box Dimension of box (l x w x h) mm Material of cover Dimension of cover (l x w) mm Standard Packing unit pc(s)
www.dehn.de
173
Inspection Doors
Inspection doors for flush-mounted test joints
Test Joints
11
175
290
235
200
32
140
230
150
15
230
200
205
202
14
180
155
230
205
200
Part No. Material Mounting dimensions (l x w) mm Dimension (l x w) mm Packing unit pc(s) 174
202 14
180
155
www.dehn.de
Test Joints
Number plates for marking the test joints Number plates with company logo upon request
Number Plates
12
R5 38 58
12
R8
38 58
15
34
1.5
15
Part No. Material Clamping range Rd / Fl Screw Material of screw Packing unit
mm mm pc(s)
Part No. Material Clamping range Rd / Fl Screw Material of screw Packing unit
1.5
34
mm mm pc(s)
34
1.5
R5
R8 3 1.5
38 58
38 58
Part No. Material Clamping range Rd / Fl Screw Material of screw Packing unit
mm mm pc(s)
Part No. Material Clamping range Rd / Fl Screw Material of screw Packing unit
34
mm mm pc(s)
www.dehn.de
175
Test Joints
84
R5
R8.5 1 2
Part No. Material Clamping range Rd / Fl Screw Material of screw Material of cleat Dimension (l x w x d) Packing unit
mm mm
mm pc(s)
Part No. Material Clamping range Rd / Fl Screw Material of screw Material of cleat Dimension (l x w x d) Packing unit
mm mm
mm pc(s)
without cleat
58 38 15
7
84
mm pc(s)
176
www.dehn.de
Type St/tZn
with disconnecting sleeve (Part No. 450 000) and KS screws (Part No. 300 000)
1500 30
60 42 16
te
21 40
s ted
Part No. Material Standard Length Connection KS screw Rd Connection sleeve Rd / Rd Packing unit
mm mm mm pc(s)
Type Cu
with disconnecting sleeve (Part No. 450 007) and KS screws (Part No. 300 007)
1500 30
60 38 16
te
21 40
s ted
Part No. Material Standard Length Connection KS screw Rd Connection sleeve Rd / Rd Packing unit
mm mm mm pc(s)
www.dehn.de
177
mm mm pc(s)
11 8
50
Part No. Material Standard Diameter Length (l1) Bore distance Packing unit
mm mm mm pc(s)
tapered
notched conductor 10 mm, partly insulated (length approx. 700 mm)
16
l1 16 10 l3 700
l2
Part No. Material Standard Diameter Length (l1) Partial length 16 mm (l2) Partial length 10 mm (l3) Packing unit 178
mm mm mm mm pc(s)
Terminal lugs straightened, for connecting down conductors to the earth-termination system, made of corrosion-resistant stainless steel StSt (V4A) Other dimensions available on request
Round wires
10 l1
Part No. Material Length (l1) Dimension Cross section Material No. Standard Packing unit
mm mm mm2
pc(s)
Flat strips
30
t = 3.5
l1
Part No. Material Length (l1) Dimension Cross section Material No. Standard Packing unit
mm mm mm2
pc(s)
Accessory for Terminal Lugs straightened Protective Cap for Terminal Lugs
to be attached on round wires or strips as striking marking (as required according to DIN 18014) and accident prevention during the construction phase
Part No. Material Diameter Support Fl Support Rd Colour Packing unit 478 099 PVC 70 30x3.5 10 green/yellow 20
12.5 70 49 38 35 6 32
mm mm mm pc(s)
www.dehn.de
179
Fixed earthing terminals as corrosion-free connection of the down-conductor system e.g. to the reinforcement of buildings to the earth-termination system for the protective equipotential bonding and/or the functional equipotential bonding measuring point for the transient or resistance test
Type M
with terminal axis (l = 180 mm, 10 mm)
4 2.5 M10/M12
12 86 80
te
10
SW19
s ted
0
3x 4.5
39 50 180
Part No. Terminal thread Material of plate Material of axis Terminal plate Short-circuit current (50 Hz) (1 s; ) 300 C) Standard Packing unit
mm kA pc(s)
2.5
M10/M12
12 86 80
SW19
39
te
s ted
50
Part No. Terminal thread Material of plate Terminal plate Short-circuit current (50 Hz) (1 s; ) 300 C) Standard Packing unit
mm kA pc(s)
specified short-circuit current applies for the connection with copper cable lug
180
6 0
3x 4.5
www.dehn.de
12 86 80
SW14
10
22 247
180
6
3x 4.5
te
s ted
Part No. Terminal thread Material of plate Material of axis Terminal plate Short-circuit current (50 Hz) (1 s; ) 300 C) Standard Packing unit
mm kA pc(s)
80
86
19
70
10
80
3x 4.5
te
247
s ted
Part No. Terminal thread Material of plate Material of axis Terminal plate Short-circuit current (50 Hz) (1 s; ) 300 C) Standard Packing unit
mm kA pc(s)
2.5
M10/M12
12 86 80
SW19
R5
R5
39 50
9
2.5
te
6 0
3x 4.5
s ted
Part No. Terminal thread Material of plate Terminal plate Short-circuit current (50 Hz) (1 s; ) 300 C) Standard Packing unit
mm kA pc(s)
www.dehn.de
181
10
M10/M12
10
12 86 90
SW19
46
6
31 50 180
te
s ted
5
3x 6
Part No. Terminal thread Material of plate Material of axis Terminal plate Short-circuit current (50 Hz) (1 s; ) 300 C) Standard Packing unit
mm kA pc(s)
s ted
80x2.5
SW22
0
M16
90
3x 4.5 56 3.5
45
400 10.5
Part No. Terminal thread Material of plate Material of cable Cross section of terminal cable Length of terminal cable Diameter of terminal cable Terminal plate Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit 182
mm mm mm mm kA pc(s)
Clamps for connecting the reinforcement by clamping frame for round conductors or fixed earthing terminals with simultanious fixing in the formwork arrangement: (II) = parallel (+) = crosswise
R5
te
s ted
50
10
22
40
42 51
Part No. Material Clamping range Rd / Rd Clamping range Rd / Fl Screw Material of screw Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm mm
kA pc(s)
308 035 St/bare (+/II) 6-22 / 6-10 (+) 6-22 / 40 di M10x60 St/bare EN 50164-1 1.0 25
M10 92 48
te
s ted
33 30
58 88
Part No. Material Clamping range Rd / Rd Clamping range Rd / Fl Screw Material of screw Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm mm
kA pc(s)
308 046 St/bare (+/II) 16-48 / 6-10 (II) 16-48 / 30-40 stirrup bolt M10x48 St/bare EN 50164-1 6.5 25
www.dehn.de
183
End Pieces
Simple design
for universal use at terminals M10 and M12, e.g. at the fixed earthing terminal for connecting Rd e.g. with KS connector (Part No. 301 019), or for connecting Fl with screws and nuts M10 or M12
28 33 3
28
63 3 13 11
10.5 30
12.5
30
18 69
18
18 99
30
18
mm pc(s)
mm mm pc(s)
28
28
46 3
46 3 11 30 15 79 22 10
11 30
te
s ted
15 79
22
10
Part No. Material Distance of bores Bore Clamping range Rd Standard Packing unit
mm mm mm pc(s)
mm mm pc(s)
184
www.dehn.de
Heavy design
70 49
Light design
49
70
te
s ted
60 2.5 2.5
R5.5
te
s ted
45
M10 3
40 58
R5
Part No. Material of clamp Clamping range Rd / Fl Material of bolt Screw Material of screw/nut Dimension (l x w x d) Standard Packing unit
mm mm mm pc(s)
478 141 St/tZn 7-10 / 30-40 StSt di M10x45 / M8x25 StSt 70x70x3 EN 50164-1 10
Part No. Material of clamp Clamping range Rd / Fl mm Material of bolt Screw mm Material of screw/nut Dimension (l x w x d) mm Standard Short-circuit current (50 Hz) (1 s; ) 300 C) kA Packing unit pc(s)
30
478 129 StSt (V4A) 8-10 / 30 StSt (V4A) di M10x60 / M8x16 StSt (V4A) 58x30x2.5 EN 50164-1 3.0 10
Sealing is performed by the pressing of the neopren disks against the brickwork/wall (fixed and loose flange). Installation can be implemented from inside. The threaded rod can be held by the lock nuts (inside) when tightening the screws. More details in installation instructions No.1332
te
s ted
53
80
=
l1
49
Part No. Length of bushing (l2) Length of threaded rod (l1) Sealings Sealing disk Material of disk Short-circuit current (50 Hz) (1 s; ) 300 C) Standard Packing unit
13
mm mm mm kA pc(s)
478 450 500-700 708 Neopren 80 StSt (V4A) 2.7 EN 50164-1 1 185
www.dehn.de
tested with 5 bar compressed air according to EN 50164-5 Type for formwork installation with water barrier and double thread M10 / M12 for connection e.g. to the equipotential bonding bar adjustable according to wall thickness by thread M10 and lock nut the bushing thread may be cut to length if necessary including connecting piece (St/tZn dimension 30x4 mm) with square hole for connection with clamping frame at round conductors or cross unit at flat strips
Figure 2: Set-up with terminal for the pressure-water test
86
19
adjusting range
3x 4.5 4 80 11 11
te
s ted
l1
Part No. Material of plate Material of axis Wall thickness (l1) Terminal thread Terminal plate Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm kA pc(s)
186
60
www.dehn.de
Earth Electrodes
Earth rods usually consist of composable single rods with a length of 1.5 m. Earth rods of DEHN + SHNE have a self-closing coupling with bore and tenon. Advantage of this construction is that the coupling closes automatically during the driving process and thus a mechanically high-strength and electrically safe connection will be implemented. Additional work steps such as screwing are not necessary. Impact tool of different kind is used to drive in the earth rods. Take into account that the driving should be carried out with a blow count of 1200 blows/min. A considerably higher blow count usually does not provide sufficient blow power so that the earth rod can not be hammered deeply enough. In case of too low blow frequencies as provided typically by compressed-air-operated impact tool, the blow power often is too high and the blow count too low. The own weight of the impact tool should be * 20 kg. The driving depth of earth electrodes depends on various geological conditions. Light soil as can be met in coastal areas or in wetlands allow for driving depths of 30 m to 40 m.
www.dehn.de
187
Earth Rods
Earth Electrodes
Earth rods for implementing earth-termination systems for down conductors or transformer stations Features: no cross section thickening at the coupling point self-closing coupling resistant against corrosion easier storage and transport universal application according to local soil conditions constant resistance values easy driving by vibration hammer More details in installation instructions No. 1014
Type S
with lead ball in the coupling
1500 34/43 d1 38/43
Part No. Material Standard Rod length (l1) Diameter (d1) Cu layer Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
12/15
mm mm mm kA pc(s)
Type Z
with triple knurled tenon (coupling with especially high tensile strength)
l1 40/45 d1 37/42
Part No. Material Standard Rod length (l1) Diameter (d1) Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
12/15
mm mm kA pc(s)
Type AZ
with offset knurled tenon
1500 10 13
www.dehn.de
35 20
Part No. Material Material No. Standard Rod length (l1) Diameter (d1) Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm kA pc(s)
188
12/15
12/15
Earth Electrodes
light design for the installation of earth-termination systems for down conductors
Type Steel
Type StSt
1500 25x2 60 21
mm mm pc(s)
Part No. Material Material No. Standard Rod length Diameter Packing unit
mm mm pc(s)
Impact Spikes
Impact spikes for driving the first earth rod The impact spikes can be used for earth rods made of steel as well as StSt and they are also applicable for tubular earth rods.
l1
d1
mm pc(s)
620 001 MCI/tZn for earth rods 20 mm or tubular earth rods St/tZn 27 mm 20x40 100
15
625 001 MCI/tZn for earth rods 25 mm or tubular earth rods StSt (V4A) 25 mm 25x45 50
www.dehn.de
189
Earth Electrodes
te
s ted
26
3.5
22
R14
R5
Part No. Material Clamping range Rd / Fl Clamping range of cable Type for earth rods Screw Material of screw Standard Packing unit
mm mm2 mm mm
pc(s)
Terminal Clamps
Clamps for cross and parallel connection of round conductors, flat strips or cables to earth rods
R5 8
35
3 3
22
13
R10
R5
75
53
70
te
s ted
53 75
te
s ted
49
12
49 70
Part No. Material Clamping range Rd / Fl Clamping range (stranded/cable) Screw Material of screw/nut Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm2 mm
kA pc(s)
Part No. Material Clamping range Rd / Fl Clamping range (stranded/cable) Screw Material of screw/nut Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm2 mm
610 020 StSt (V4A) 7-10 / -40 35-70 di M8x30 StSt (V4A) EN 50164-1 8 25
kA pc(s)
190
www.dehn.de
Terminal Brackets
R4
optional
Brackets for connecting round conductors, cables and flat strips to earth rods
30 10 8 85
te
s ted
Part No. Material Clamping range Rd / Fl Clamping range (stranded or cable) Type for earth rods Screw Material of screw/nut Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm2 mm mm
kA pc(s)
620 915 StSt (V4A) 7-10 / -40 50-95 20 di M10x30 StSt (V4A) EN 50164-1 8 20
649 015 StSt (V4A) 7-10 / -40 50-95 25 di M10x30 StSt (V4A) EN 50164-1 8 20
R10/R12.5
te
3
s ted
R4
te
30 85 10 8
s ted
61 115 30
Part No. Material Clamping range Rd / Fl Type for earth rods Screw Material of screw/nut Standard Packing unit
mm mm mm
pc(s)
Part No. Material Clamping range Rd / Fl Type for earth rods Screw Material of screw/nut Standard Packing unit
40
mm mm mm
pc(s)
R5
12
te
s ted
te
3
s ted
40 61 30 115
40
61 145
30
Part No. Material Clamping range Rd / Fl Type for earth rods Screw Material of screw/nut Standard Packing unit
www.dehn.de
mm mm mm
pc(s)
Part No. Material Clamping range Rd / Fl Type for earth rods Screw Material of screw/nut Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm mm
kA pc(s)
20
Earth Electrodes
Product
Type
BH 23 petrol engine BH 24 petrol engine BH 24 Low Vib petrol engine BH 30 petrol engine (no longer available) EH 23 Low Vib universal engine 230 V EH 25 asynchronous engine 230 V EH 22/400 electric engine 400 V Cobra Combi (former 149) petrol engine CP Red Hawk (former Cobra Standard) petrol engine Cobra TT * petrol engine Cobra PRO * (former MK1) petrol engine
Connection
Blow power
55 J 65 J 55 J
Wacker Neuson
round 27x80 mm
27.4 kg
1270
47 J
22.4 kg
1280
50 J
25.0 kg
1275
70 J
22.0 kg
1250
40 J
2500-2600
24 J
2600
24 J
Atlas Copco
720-1600
40 J
720-1440
60 J
Note: The details of the DEHN + SHNE installation instructions Nr. 1014 for earth rods have to be considered! * Hexagon SW 32x160 Part No. 625 007/S Id. No. 46399 (special design on request)
192
www.dehn.de
Earth Electrodes
Hammer inserts for driving of earth rods with vibration hammer for earth rods Types S + Z 20 mm (tenon 12 mm Part No. 620...) or 25 mm (tenon 15 mm Part No. 625...) For Atlas Copco equipment several types of supports can be used. Please note when placing your order. Design for other types of hammer available on request.
15
l1 200
25
80
34
Part No. Type Adapter Material Bore (d1 x l1) Length Packing unit
mm mm pc(s)
620 005 EH 23/230, 22/400, BH 23 and BHF 30 round 27x80 mm St/bare 13x50 200 1
625 005 EH 23/230, 22/400, BH 23 and BHF 30 round 27x80 mm St/bare 16x55 200 1
Special hammer insert for earth rods d=20 mm, StSt for Wacker equipment Part No. 620 005/S Id. No. 046377 upon request.
70
28
27
d1
34
15
l1 260
25
80
Part No. Type Adapter Material Bore (d1 x l1) Length Packing unit
mm mm pc(s)
620 009 EH 23 Low Vib, BH 24 Low Vib, BH 23 and EH 25 round 27x80 mm St/bare 13x50 260 1
625 009 EH 23 Low Vib, BH 24 Low Vib, BH 23 and EH 25 round 27x80 mm St/bare 16x55 260 1
www.dehn.de
193
Earth Electrodes
35
d1
l1 240
108
SW22
Part No. Type Adapter Material Bore (d1 x l1) Length Packing unit
mm mm pc(s)
620 007 Cobra Combi, Cobra Standard hexagon SW22x108 mm St/bare 13x50 240 1
625 007 Cobra Combi, Cobra Standard hexagon SW22x108 mm St/bare 16x55 240 1
39
30
l1 240
39
d1
108
SW25
Part No. Type Adapter Material Bore (d1 x l1) Length Packing unit
mm mm pc(s)
620 008 TEX 15 PE, 19 PE, 23 PE hexagon SW25x108 mm St/bare 13x50 240 1
625 008 TEX 15 PE, 19 PE, 23 PE hexagon SW25x108 mm St/bare 16x55 240 1
35
29
l1 350
45
d1
160
SW28
Part No. Type Adapter Material Bore (d1 x l1) Length Packing unit
mm mm pc(s)
620 019 TEX 28 HE, 27 H, 15 PE, 19 PE, 23 PE, 22 PS hexagon SW28x160 mm St/bare 13x50 350 1
625 019 TEX 28 HE, 27 H, 15 PE, 19 PE, 23 PE, 22 PS hexagon SW28x160 mm St/bare 16x55 350 1
35
d1
l1 250
170
SW28
Part No. Type Adapter Material Bore (d1 x l1) Length Packing unit
mm mm pc(s)
194
26
www.dehn.de
Earth Electrodes
Hammer inserts for driving of tubular earth rods with vibration hammer Design for other types of hammer upon request
25 246
80
SW34
mm pc(s)
649 005 EH 22/400, 23/230, 24/042/200, BH 23 and BHF 30 round 27x80 mm St/bare 246 1
40
25
29
35
7 246
108
SW22
mm pc(s)
649 007 Cobra 149+248 and Cobra 120+130 hexagon SW22x108 mm St/bare 246 1
39 246
25
80
34
mm pc(s)
648 005 EH 22/400, 23/230, 24/042/200, BH 23 and BHF 30 round 27x80 mm St/bare 246 1
Design for tubular earth rods 25 mm StSt (V4A) Atlas Copco equipment
25.6 40 25 35
39 246
108
SW22
mm pc(s)
648 007 Cobra 149+248 and Cobra 120+130 hexagon SW22x108 mm St/bare 246 1
www.dehn.de
195
Impact Heads
Impact heads for driving of earth rods with manual beetle
Earth Electrodes
80 65
d1
44
Part No. Type of earth rod Dimension (d1 x l1) Material Packing unit
mm pc(s)
Hammer Frame
Hammer frame for driving of earth rods with a length of 1000 mm and 1500 mm with vibration hammer The device features a solid and useful structure and is easily transportable. The attached cable winch allows for safe hammer guiding. The hammer frame will be delivered without hammer guiding rider. If the hammer guiding rider shall be mounted please state when ordering. More information about working with the hammer frame (with list of spare parts) in the instructions for use No. 1171
2550
l1
0 212
1830
27
mm pc(s)
www.dehn.de
Earth Electrodes
Hammer guiding riders for vibration hammers of the following manufacturers
106
40 168
40 215 109
62 4 225 56 52 15
pc(s)
600 035 EH 23 Low Vib, EH 22/400, BH 24 Low Vib, BH 23, BHF 30 und EH 25 St/tZn 1
93
194
231 21 5
36
40
225 560
15
79
162
56
52
pc(s)
117
130
133
40
40
97
40
255
15
162
190
176
pc(s)
www.dehn.de
205
56
52
40
26
26
26
0 R9
Earth Electrodes
Profiled earth rods for the establishing of earth-termination systems e.g. for antennas or worksite distribution boards
Profile (50x50x3 mm), with connecting tab and bores, e.g. for KS connector
50
l1
25
94
11
22 60
13 13
90
mm mm pc(s)
198
www.dehn.de
Nominal diameter dS
Outer diameter dA
The outer diameter including corrugation is approx. dA = 1.15 x dS. Nominal diameter ds (mm) Outer diameter incl. corrugation dA (mm) Nominal cross section (mm2) 6 6.9 28.3 8 9.2 50.3 10 11.5 78.5 12 13.8 113.1 14 16.1 154 16 18.4 201 20 23 314 25 29 491 28 32 616 32 37 804 40 46 1257
Figure 1: Diameters of reinforcement steels Ref.: Bewehrungen von Stahlbetontragwerken nach DIN 1045-1:2001-07
www.dehn.de
199
41
37
13 R2 11 40
te
14
R2 40 32 38
te
s ted
17
s ted
Part No. Material Clamping range Rd / Rd Clamping range Rd / Fl Clamping range Fl / Fl Screw Material of screw Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm mm mm
308 025 St/tZn (+) 6-10 / 6-10 (+) 6-10 / 30 (II) 30 / 30 di M10x25 StSt EN 50164-1 9 50
kA pc(s)
Part No. Material Clamping range Rd / Fl Clamping range Fl / Fl Screw Material of screw Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm mm
kA pc(s)
R5
22
50
50
10
10
22
te
s ted
40
42 51
te
s ted
40
42 51
Part No. Material Clamping range Rd / Fl Screw Material of screw Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm
kA pc(s)
Part No. Material Clamping range Rd / Rd Clamping range Rd / Fl Screw Material of screw Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm mm
308 035 St/bare (+/II) 6-22 / 6-10 (+) 6-22 / 40 di M10x60 St/bare EN 50164-1 1.0 25
kA pc(s)
200
www.dehn.de
Components for Foundation Earth Electrodes U-clamp terminal for large diameters
M10 R5 55 6
R5 55 6
M10
92 48
92
48
30
s ted
33 30
te
te
s ted
58 88
58 88
Part No. Material Clamping range Rd / Rd Clamping range Rd / Fl Screw Material of screw Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm mm
308 045 St/bare (II) 16-48 / 6-10 (II) 16-48 / 30-40 stirrup bolt M10x48 St/bare EN 50164-1 16 25
kA pc(s)
Part No. Material Clamping range Rd / Rd Clamping range Rd / Fl Screw Material of screw Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm mm
308 046 St/bare (+/II) 16-48 / 6-10 (II) 16-48 / 30-40 stirrup bolt M10x48 St/bare EN 50164-1 11 25
kA pc(s)
MAXI MV clamps
for T, cross and parallel connections
R13 16 3 R8
75
16
te
s ted
75
Part No. Material Clamping range Rd / Rd Screw Material of screw Standard Short-circuit current (50 Hz) (1 s; ) 300 C) UL certification Packing unit Stock No.
308 041 St/tZn mm (+ / II) 8-16 / 15-25 mm di M12x65 St/tZn EN 50164-1 kA pc(s) 6.2 20 5999-12-362-1557
308 040 St/bare (+ / II) 8-16 / 15-25 di M12x65 St/bare EN 50164-1 6.2 UL467B 20
www.dehn.de
201
Clamps for connecting round and flat conductors in the concrete foundation for T, cross and parallel connections, without having to thread the conductors Arrangement: (II) = parallel (+) = crosswise
te
s ted
35
R6 34 9
19 32 62
32 38
Part No. Material Clamping range Rd / Fl Clamping range Fl / Fl Screw Material of screw Standard Packing unit
mm mm mm
pc(s)
Wedge Connector
Wedge connector with catch position for T, cross and parallel connections for use in concrete foundations
50 35
100
135
42
70
2.5
Part No. Material Clamping range Rd / Fl Clamping range Fl / Fl Material of wedge Packing unit
mm mm pc(s)
42
R5.5
202
www.dehn.de
85
40
Part No. Material of strap Dimension of strap (l x w x d) Cross section Material of block Dimension of block (l x w x d) Standard Short-circuit current (50 Hz) (1 s; ) 300 C) Packing unit
mm mm2 mm kA pc(s)
45
Spacers
Spacers for installing earth conductors in the foundation slab with safety lug which prevents coming loose of the conductor
Type straight
3.5 8 3 40
R5
19
60
3.5
53
300
18 12 280
210
121
35
45 45
65
45 50
mm mm mm pc(s)
mm mm mm pc(s)
30
4x1
5 Years
Figure 1
filled earth
DEHNIT filling
Figure 2
0.3 m
Figure 3
d + 10 cm
2. Procedure for earth rods 2.1 Drill a hole as deep as the length of the earth electrode with a diameter of at least 10 cm wider than the diameter (d) or the outer dimensions of the earth rod. 2.2 Mix DEHNIT according to 1.2. 2.3 Put the earth rod into the centre of the hole and fill the remaining space with DEHNIT. Pound every 0.5 m filling level. Finally refill the upper approx. 0.5 m with natural soil. 2.4 Make the first resistance measuring of the earth-termination system. Proceeding instructions Following this procedure, usually 0.84 kg of DEHNIT is needed per metre of earth rod depth (d = 20 mm). The final earth electrode resistance will be achieved after about 3 4 months. It is 1/2 1/3 of the value measured immediately after the filling with DEHNIT. After this time the DEHNIT earth-termination system has an earth electrode resistance which is approx. 50 % lower than that of usual earthtermination systems without enclosure. This resistance value remains constant throughout years.
573 000 special clay 5 parts sand / 1 part DEHNIT / 0.5 parts water 25
204
approx. 0.5 m
www.dehn.de
Equipotential Bonding
Equipotential busbars for protective and funcitonal equipotential bonding and lightning equipotential bonding according to EN 62305-3 Type: tested according to DIN VDE 0618 Part 1 CE mark Fixing frames and plastic cover grey or black (halogen-free) sealable / labelable cover snap-on terminals, St/gal Zn (loosely included) with 12 contact studs Assignment: for Rd one contact stud each for Fl two contact studs each
Standard type
Terminals for: 10 conductors 2.5-95 mm2 (solid/stranded) or Rd 10 mm 1 conductor Fl up to 30x4 mm
149 59
161
35
25.5
18.5
te
125
s ted
Part No. Contact bar Cross section Fixing Standard Packing unit
mm2 mm pc(s)
UV stabilized type
Terminals for: 10 conductors 2.5-95 mm2 (solid/stranded) or Rd 10 mm 1 conductor Fl up to 30x4 mm
149 59
161
35
25.5
18.5
125
te
s ted
Part No. Contact bar Cross section Fixing Standard Packing unit
www.dehn.de
mm2 mm pc(s)
Equipotential Busbar MS
Busbar for equipotential bonding Terminals for: 7 conductors 2.5-16 mm 1 conductor Rd 7-10 mm 1 conductor Fl up to 30x3.5 mm or Rd 8-10 mm
38 16 49 8 38
Equipotential Bonding
Design with plastic cover, grey
164
52
174
mm2 mm pc(s)
Type A
Terminals for: 7 conductors 2.5-25 mm (solid/stranded) 2 conductors 16-95 mm or Rd 8-10 mm 1 conductor Fl up to 30x4 mm
15
56
200
34 155
14
te
176
s ted
Part No. Clamping bar Cross section Fixing Standard Packing unit 206
mm2 mm pc(s)
65
56
200
34 155
14 176
65
te
s ted
Part No. Clamping bar Cross section Fixing Standard Packing unit
mm2 mm pc(s)
Type C
Terminals for: 13 conductors 2.5-25 mm (solid/stranded) 1 conductor 16-95 mm (solid/stranded) or Rd 8-10 mm
56
200
14
6 155 176
65
te
s ted
Part No. Clamping bar Cross section Fixing Standard Packing unit
mm2 mm pc(s)
Accessories for Equipotential Busbars R15 with Terminal Block System / Kit Terminal Block
for connection of: 1 conductor
Part No. Material Modules Standard Packing unit
2.5-25 mm (solid/stranded)
563 011 St/gal Zn 1 EN 50164-1 200
6.5
26
5.7
10.5 16
12
pc(s)
te
s ted
Terminal Block
for connection of: 1 conductor
Part No. Material Modules Standard Packing unit
www.dehn.de
2 14
pc(s)
te
s ted
207
Equipotential Bonding
34
te
20
s ted
10.4
pc(s)
30
20
Terminal Block
for connection of: 1 conductor Fl up to 40x5 mm
Part No. Material Modules Standard Packing unit 563 019 St/gal Zn 5 EN 50164-1 25
27 2 20 10.5 20 3
3 41
te
s ted
pc(s)
Clamping Bar
Part No. Length (l1) Modules Material Cross section Quantity of bar frames Quantity of covers Packing unit mm 563 016 198 15 Ms/gal Sn 100 2 1 10 563 017 398 30 Ms/gal Sn 100 4 2 10 563 018 798 60 Ms/gal Sn 100 8 4 10
l1 10
mm2
29 22 3
10.5
17
pc(s)
Bar Frame
12
36 58
mm pc(s)
20 6
10
Cover
to snap on / labelable
5
56
22
154 200
16.5 65
pc(s)
30
13
31
6 113
without cover Equipotential busbars for protective and functional equipotential bonding in small systems tested according to DIN VDE 0609 terminal block St/gal Zn Terminals for: 6 conductors 2.5-25 mm (solid/stranded)
Part No. Clamping bar Cross section Bar frames Fixing Standard Packing unit
12
16
10.5
52.5
20
mm2 mm pc(s)
208
36 58
te
s ted
10
13.5
Equipotential Bonding
Earthing clamps for incorporating the mounting systems e.g. of PV systems into the functional equipotential bonding/functional earthing The StSt contact plate (intermediate plate) allows for conductors of different materials such as Cu, Al, St/tZn and StSt to be connected with the usual mounting systems e.g. aluminium without risk of contact corrosion. Easy and quick interconnection of the profiles e.g. by feed-through wiring is possible due to the double cleat design.
=
with screw M8 and locking nut with screw M10 and locking nut
R5
R5 R5 8
te
s ted
te
s ted
8 5
24 34
11
23 34
11
32
37
32
37
Part No. Material of clamp Clamping range Rd Connection (solid/stranded) Screw Material of screw/nut Standard Packing unit
mm mm2 mm
pc(s)
540 250 StSt 8-10 4-50 hammer-head bolt M8x30 StSt EN 50164-1 50
Part No. Material of clamp Clamping range Rd Connection (solid/stranded) Screw Material of screw/nut Standard Packing unit
mm mm2 mm
pc(s)
540 260 StSt 8-10 4-50 hammer-head bolt M10x30 StSt EN 50164-1 50
te
s ted
te
s ted
1 6
R5 8 6
R5 8
37
37
32
11
11
32
11
10
Part No. Material of clamp Clamping range Rd Connection (solid/stranded) Standard Packing unit
www.dehn.de
mm mm2 pc(s)
32
Part No. Material of clamp Clamping range Rd Connection (solid/stranded) Standard Packing unit
mm mm2 pc(s)
32
12
12
Equipotential Bonding
Equipotential busbars for the protective and functional equipotential bonding and lightning equipotential bonding according to EN 62305-3 also for use in potentially explosive atmospheres (screws are locked to prevent accidental loosening) with spring washer insulator UP (duroplastic, red) with thread M10 UV stabilized and halogen-free
6 terminals
40 15 11 t1
te
s ted
Part No. Material Dimension (l x w x t1) Cross section Short-circuit current (50 Hz) (1 s; ) 300 C) Screw Material of screw/nut Material of insulator Packing unit
mm mm2 kA mm
pc(s)
8 terminals
40
40
15
40
te
s ted
Part No. Material Dimension (l x w x t1) Cross section Short-circuit current (50 Hz) (1 s; ) 300 C) Screw Material of screw/nut Material of insulator Packing unit
mm mm2 kA mm
pc(s)
10 terminals
t1
11
40
15
40
te
s ted
Part No. Material Dimension (l x w x t1) Cross section Short-circuit current (50 Hz) (1 s; ) 300 C) Screw Material of screw/nut Material of insulator Packing unit 210
mm mm2 kA mm
pc(s)
t1
11
40
15
40
te
s ted
Part No. Material Dimension (l x w x t1) Cross section Short-circuit current (50 Hz) (1 s; ) 300 C) Screw Material of screw/nut Material of insulator Packing unit
mm mm2 kA mm
pc(s)
Accessories for Equipotential Busbars Industry Design Insulator for EBB Industry Design
Part No. Material Terminal thread Colour Dimension (d x h) Packing unit 472 210 UP (Duroplast) M10 (length 12 mm) red 32x40 1
40 32
mm pc(s)
mm
pc(s)
0.8
SW13 15 M10
mm
M10
pc(s)
11 l1
M10
Part No. Material of screw Screw Plastic dowel Total length Packing unit
mm mm mm pc(s)
SW8 80
60
45
20
60
t1
www.dehn.de
211
11
Earthing Busbars
Earthing busbars for screwing or welding to steel structures, distance of bores 50 mm
Equipotential Bonding
Connection possibilities: flat strip with bore: with hexagon screws M10, nuts and spring washer flat strip (-40 mm) without bore: with cleat of disconnecting clamps e.g. Part No. 454 100 round conductor: with KS connector e.g. Part No. 301 000 / 301 019 or with clamping frame e.g. Part No. 390 150
2x2 terminals
126
Part No. Material Cross section Connection bores Dimension (l x w x d1) Fixing Packing unit
mm mm mm mm pc(s)
50
50 15
12
11
30
170 196
2x3 terminals
171
Part No. Material Cross section Connection bores Dimension (l x w x d1) Fixing Packing unit
mm2 mm mm mm pc(s)
50
60
11
50
t1
2x50 (=100) 15 50 12 30 216 242
224
2x4 terminals
Part No. Material Cross section Connection bores Dimension (l x w x d1) Fixing Packing unit
mm2 mm mm mm pc(s)
60
11
t1
3x50 (=150) 15 50 12 30 267 293
2x6 terminals
323
Part No. Material Cross section Connection bores Dimension (l x w x d1) Fixing Packing unit 212
mm mm mm mm pc(s)
50
60
t1
5x50 (=250) 15 50
30
11
12
367 393
60
t1
www.dehn.de
Equipotential Bonding
Earthing pipe clamps for integrating pipes into the protective and functional equipotential bonding, with continuously adjustable tensioning strap
Mini type
one-wire connection, terminal cross section 2.5-6 mm2
15
1
15
19
l1
Part No. Material of head Material of strap Clamping range of pipe Screw Material of screw Dimension of strap (l1 x w x d) Packing unit
10
0.25
mm mm mm pc(s)
540 001 Ms/gal Sn StSt 13.5-48.3 (1/4 - 11/2") g M6x10 St/gal Zn 190x10x0.25 20
540 002 Ms/gal Sn StSt 13.5-88.9 (1/4 - 3'') g M6x10 St/gal Zn 325x10x0.25 20
26 2
61
Standard type
for one-wire or two-wire connection with feed-through wiring, terminal cross-section 4-25 mm2
0.3
2 16 35
25
l1
Part No. Material Clamping range of pipe Screw Material of screw Dimension of strap (l1 x w x d) Packing unit
26 2
mm mm mm pc(s)
61
540 910 StSt 26.9-60.3 (3/4 - 2'') di M8x20 / dm M6x16 StSt 240x25x0.3 10
19
540 911 StSt 26.9-114.3 (3/4 - 4'') di M8x20 / dm M6x16 StSt 410x25x0.3 10
540 912 StSt 26.9-165 (3/4 - 6'') di M8x20 / dm M6x16 StSt 570x25x0.3 10
2 16 20
26 35
20
19
mm pc(s)
www.dehn.de
Equipotential Bonding
mm m pc(s)
Part No. Material Clamping range of pipe Terminal cross section Screw Material of screw Dimension (l1 x r1) Packing unit
mm mm2 mm mm pc(s)
l1
s ted
Part No. Material Clamping range of pipe Terminal cross section Screw Material of screw Dimension (l1 x r1) Packing unit
mm mm2 mm mm pc(s)
214
www.dehn.de
Equipotential Bonding
Earthing pipe clamps for integrating pipes into the lightning equipotential bonding according to EN 62305-3
R4 r1
l1
16
te
s ted
Part No. Clamping range of pipe Material Screw Material of screw/nut Dimension (l1 x r1) Standard Packing unit
mm mm mm pc(s)
R5.5
r1
te
s ted
l1
40
Part No. Clamping range of pipe Material Screw Material of screw/nut Dimension (l1 x r1) Standard Packing unit
mm mm
mm pc(s)
407 012 21.3 (1/2'') MCI / St/tZn di M10x30 / M8x20 St/tZn 80x11 EN 50164-1 10
407 034 26.9 (3/4'') MCI / St/tZn di M10x30 / M8x20 St/tZn 83x14 EN 50164-1 10
407 100 33.7 (1'') MCI / St/tZn di M10x30 / M8x20 St/tZn 85x17.5 EN 50164-1 10
407 114 42.4 (1 1/4'') MCI / St/tZn di M10x30 / M8x20 St/tZn 100x24.5 EN 50164-1 10
407 112 48.3 (1 1/2'') MCI / St/tZn di M10x30 / M8x20 St/tZn 95x22 EN 50164-1 10
407 200 60.3 (2'') MCI / St/tZn di M10x30 / M8x20 St/tZn 113x30.5 EN 50164-1 10
www.dehn.de
215
Equipotential Bonding
St/tZn material thickness 3 mm connection for Fl with screws and nuts M10, for Rd 7-10 mm e.g. KS connector Part No. 301 000 or clamping frame, Part No. 390 150
r1 3 3 12
te
s ted
30 l1
Part No. Clamping range of pipe Material Screw Material of screw/nut Dimension (l1 x r1) Standard Packing unit Part No. Clamping range of pipe Material Screw Material of screw/nut Dimension (l1 x r1) Standard Packing unit
mm mm mm pc(s) mm mm mm pc(s)
410 038 17.2 (3/8'') St/tZn di M8x20 St/tZn 110x8.5 EN 50164-1 25 410 112 48.3 (1 1/2'') St/tZn di M8x20 St/tZn 140.5x24 EN 50164-1 25
410 012 21.3 (1/2'') St/tZn di M8x20 St/tZn 115x10.5 EN 50164-1 25 410 134 54.5 (1 3/4'') St/tZn di M8x20 St/tZn 145x27.5 EN 50164-1 25
410 034 26.9 (3/4'') St/tZn di M8x20 St/tZn 115x13.5 EN 50164-1 25 410 200 60,3 (2'') St/tZn di M8x20 St/tZn 151x30 EN 50164-1 25
410 100 33,7 (1'') St/tZn di M8x20 St/tZn 124x17 EN 50164-1 25 410 212 76.1 (2 1/2'') St/tZn di M8x20 St/tZn 169x38 EN 50164-1 20
410 114 42.4 (1 1/4'') St/tZn di M8x20 St/tZn 132.5x21 EN 50164-1 25 410 300 88,9 (3'') St/tZn di M8x20 St/tZn 182.5x44.5 EN 50164-1 15
40
te
30 l1
Part No. Clamping range of pipe Material Screw Material of screw/nut Dimension (l1 x r1) Standard Packing unit Part No. Clamping range of pipe Material Screw Material of screw/nut Dimension (l1 x r1) Standard Packing unit
mm mm mm pc(s) mm mm mm pc(s)
410 309 17.2 (3/8'') StSt di M8x20 StSt 110.5x8.5 EN 50164-1 25 410 359 48.3 (1 1/2'') StSt di M8x20 StSt 140.5x24 EN 50164-1 25
410 319 21.3 (1/2'') StSt di M8x20 StSt 114.5x10.5 EN 50164-1 25 410 369 54.5 (1 3/4'') StSt di M8x20 StSt 145x27.5 EN 50164-1 25
410 329 26.9 (3/4'') StSt di M8x20 StSt 115.5x13.5 EN 50164-1 25 410 379 60,3 (2'') StSt di M8x20 StSt 151x30 EN 50164-1 25
410 339 33,7 (1'') StSt di M8x20 StSt 124x17 EN 50164-1 25 410 389 76.1 (2 1/2'') StSt di M8x20 StSt 169x38 EN 50164-1 20
410 349 42.4 (1 1/4'') StSt di M8x20 StSt 132.5x21 EN 50164-1 25 410 399 88,9 (3'') StSt di M8x20 StSt 182.5x44.5 EN 50164-1 15
216
11
11
40
www.dehn.de
23
15 2.5 2.5 34 30
68
25
te
s ted
17
Pipe clamps for lightning current carrying capable connection e.g. of antenna poles and for lightning equipotential bonding according to EN 62305-3 with adjustable tensioning strap for connecting one or two conductors and for feed-through wiring lightning current tested according to EN 50164-1 up to 100 kA (10/350)
mm
pc(s)
te
s ted
mm m pc(s)
15
23
2.5 2.5 34
30
68
25
17
25
0.3
l1
Part No. Material Clamping range of pipe Screw Material of screw Dimension of strap (l1 x w x d) Standard Military name Packing unit Stock No.
mm mm
540 103 StSt 26.9-88.9 (3/4 - 3'') di M8x20 StSt 330x25x0.3 EN 50164-1 VG 96953 T05 B0001 10
540 100 StSt 26.9-165 (3/4 - 6'') di M8x20 StSt 570x25x0.3 EN 50164-1 VG 96953 T05 B0002 10 5975-12-120-7744
mm
pc(s)
www.dehn.de
217
Equipotential Bonding
15
23
2.5 2.5
te
s ted
34
30
68
25
17 l1
Part No. Material Clamping range of pipe Screw Material of screw Dimension of strap (l1 x w x d) Standard Packing unit
mm mm mm pc(s)
540 200 StSt 26,9-165 (3/4 - 6'') di M8x20 StSt 570x25x0.3 EN 50164-1 10
Downpipe Clamps
Pipe clamps for lightning equipotential bonding connection of downpipes according to EN 62305-3 connection possibilities for Rd e.g. with KS connector Part No. 301 000 or with clamping frame Part No. 390 150 (according to material)
X X
10 11
25
0.3
s ted
d1
29
16
40
11
Part No. Material Clamping range of pipe (d1) Bore Screw Material of screw/nut Standard Packing unit 218
mm mm mm
pc(s)
Downpipe Clamps
for the connection of conductors made of St with downpipe clamps made of Cu, with clamping frame St/tZn and intermediate plate (Cupal)
1
R5
R7
29
1.5
te
s ted
Part No. Material Clamping range of pipe (d1) mm Clamping range Rd mm Screw mm Material of screw/nut Standard Packing unit pc(s)
40
Type RV adjustable
with additional screw-retaining thread insert of the fixing screw and markings, predetermined bending points as well as stamped-on cutting aids
10.5 15 25
te
56
s ted
l1 8.5
30
16
32
Part No. Material Clamping range of pipe (d1) mm Length (l1) mm Bore mm Screw mm Material of screw/nut Standard Packing unit pc(s)
www.dehn.de
219
Earthing Tongs
Equipotential Bonding
for connection of fuel lorries, aircraft etc. for static discharge for application in explosion-hazard areas More details in installation instructions No. 1530
Small design
brass jaw with steel tips (Material No. 1.4104) and copper contact clip; Terminal: panhead screw with slot or with enclosed crimping cable lug 25 mm M6 (Cu/gal Sn)
140
Part No. Material of tongs Clamping range Length Terminal screw Material of screw Packing unit
mm mm mm pc(s)
Large design
brass jaw without steel tips and copper contact clip; Terminal: threaded bolt with nut
66 205
26
47
Part No. Material of tongs Clamping range Length Terminal nut Material of screw Packing unit
mm mm
pc(s)
220
38
www.dehn.de
Electrical installations are an implementation of interacting equipment powered by different electrical systems as there are high-voltage technology (HV systems) medium voltage technology (MV systems) low-voltage technology (LV systems) information technology (IT systems) Basis for a reliable interaction of the different systems is a common earth-termination system and a common equpotential bonding system. It is important that all conductors, clamps and connectors are specified for the various applications. For buildings with integrated transformers, standards and guidelines concerning power plants with nominal voltages over 1 kV have to be considered. Conductor materials and connection components for use in HV, MV and LV systems have to comply with the requirements arising in case of 50 Hz currents. Due to the prospective short-circuit currents (50 Hz) the cross sections of the earth electrode material for the various systems / buildings have to be especially determined. Currents of shortcircuits to earth (standard requirement double short-circuit to earth current IkEE) must not lead to inadmissible heating of the components. If the distribution network operator (DNO) does not have special requirements, the standard requirements concerning the fault current duration (duration of disconnection) of one second and the maximum permissible temperature of 300 C are taken as a basis for the used materials of earthing conductors and connection components / clamps. Decisive factors for the selection of the earthing conductor cross section are the material and the current density G (in A/mm) in relation to the fault current duration. The diagram shows the permissible 50 Hz short-circuit current density (G) for the conductor materials copper, steel and high-alloy steel (stainless steel V4A material No. 1.4571). Detailed values of the short-circuit current (Ik) at a current flow duration of 1 s on the earthing conductors, earth rods and various connection components / clamps are indicated in the main catalogue lightning protection or in the product data sheets (www.dehn.de product data).
2000 1000 800 600 400 300 200 150 100 80 60 40 20 10 0.02 0.06 0.1 0.04 0.08 0.4 0.8 0.6 1 2 4 6 10
1 2 3 1 2 3
0.2
www.dehn.de
221
50 Hz Ampacity of Conductors and Connection Components Components for Ring Equipotential Bonding
In the following a calculaton of the short-circuit current to earth showing how to design the earth conductor: Version 1 A 3-pole short-circuit current specified by the system operator e.g. Ik3 5 15000 A Version 2 Calculation of a theoretical worst case asssuming that the supplying voltage will not fail (remains constant). The short-circuit voltage (uk) is used to determine the max. 3-pole short-circuit current. The 3-pole short-circuit current Ik3 is the max. 3-pole short-circuit current at the transformer regardless of an impedance on the fault site (Z = 0 ). In the calculation exemplarily a transformer with the following data is considered: Nominal capacity of the transformer S = 630 kVA Nominal voltage on low-voltage side U = 400 V Short-circuit voltage uk = 6.05 % Design for short-circuit Linear conversion for the short-circuit voltage (worst case): Determination of the resulting cross section The cross section of a conductor results from the material and the disconnecting time. In the German standard VDE 0101 the maximum short-circuit current density G [A/mm2] is specified for different materials (see VDE 0101 Figure B1 ). Time
0.3 s 0.5 s 1s 3s 5s
If via the earthing conductor/protective equipotential bonding conductor to the transformer, the short-circuit current to earth distributes in the mesh of a system (earthing bus conductor or intermeshed earthtermination system), it can be assumed that the current will distribute at the nodal point into two directions. The asymmetry in the intermeshing of the earth-termination system can be assumed with a sufficient accuracy to be 65 %. The short-circuit current to earth which has to be taken into account for this earth-termination system (earthing bus conductor or intermeshed earth-termination system) is specified as IkEE (branch) in our example.
A current of IkEE (branch) = 8300 A therefore is taken as basis for the dimensioning of the cross section of this earth-termination system in the example shown.
Ik3 =
S 3 U uk
1 1 1
St/tZn
129 A/mm
2
Copper
355 A/mm
2
StSt (V4A)
70 A/mm2 55 A/mm2 37 A/mm2 21 A/mm2 17 A/mm2
Ik3
31 A/mm2
87 A/mm2
The worst case of a double short-circuit to earth in a system shall be assumed for the dimensioning of the cross section of an earthing conductor / earthing bus conductor. Therefore earth-termination systems shall be designed for the double short-circuit current to earth (IkEE).
Table: Short-circuit current density G The determined current now is divided by the current density G of the respective material and the assigned disconnecting time and the minimum cross section Amin of the conductor will be determined.
A factor of 85 % for the dimensioning of the short-circuit current to earth on the basis of the 3-pole short-circuit current to earth results from the German standard DIN VDE 0101 Starkstromanlagen mit Wechselspannungen ber 1 kV. The earthing conductor/the protective equipotential bonding conductor is to be dimensioned for the double short-circuit current to earth IkEE up to the transformer directly.
Legend: S U uk Ik Ik3 IkEE G Amin nominal capacity nominal voltage (low voltage) short-circuit voltage short-circuit current 3-pole short-circuit current double short-circuit current to earth short-circuit current density minimum cross section [VA] [V] [%] [A] [A] [A] [A/mm2] [mm2]
222
www.dehn.de
Thrust piece with screw M8 for the installation of strip conductor up to 11 mm and round conductor 6-10 mm
Wall distance 11 mm
27 15 11 12
60
R5.5 7 20
10
13 2.5
36
Part No. Material of conductor holder Wall distance mm Fixing mm Slot width mm Screw mm Material of screw Packing unit pc(s)
30
Wall distance 15 mm
27 15
20 70 15 12 7 3 40
Part No. Material of conductor holder Wall distance mm Fixing mm Slot width mm Screw mm Material of screw Packing unit pc(s)
40
www.dehn.de
223
Conductor Holder
Conductor holder for installing round and flat conductors for equipotential bonding e.g. in transformer stations, processor rooms insulated conductor holder
R6 19 22 32 42 60
14
Part No. Conductor holder support Rd / Fl Fixing Material Colour Screw Material of screw Packing unit
mm mm
mm pc(s)
277 130 6-13 / 30x4 10 and 6x19 plastic grey dm M6x16 StSt 50
Terminal Clamp
Clamp for universal connection to the ring equipotential bonding for St/tZn, copper or stainless steel (StSt)
20 2 3
R5 77 66 38
Part No. Conductor holder support Rd / Fl Material Terminal cross section Short-circuit current (50 Hz) (1 s; ) 300 C) Screw Material of screw Packing unit
mm mm2 kA mm pc(s)
224
20
www.dehn.de
Wire Straighteners
180
15
Part No. Material Support Rd Material of guide pulleys Dimension (l x w) Packing unit
28 33
mm mm pc(s)
50
132
290
16
250
Part No. Material Support Rd Material of guide pulleys Dimension (l x w) Packing unit
www.dehn.de
mm mm pc(s)
Wire Straighteners
10 guide pulleys, with derrick
for stationary set-up
580 10 950 500
1350
200
200
Part No. Material Support Rd Material of guide pulleys Dimension (l x w) Packing unit
mm mm pc(s)
1200
20
10
950
840
550
00 2
150
1650
Part No. Material Support Rd Material of guide pulleys Dimension (l x w) Packing unit
mm mm pc(s)
226
460
www.dehn.de
Straightening Tools
Straight design
19 4.5 32 25 10 50 260
38
mm mm g pc(s)
Cranked design
wrench size A/F 10 for screwing
22
32
10 18
27 SW10 18 17
12
49
11 261
36
mm mm g pc(s)
57
Spider Wrench
120
120
mm pc(s)
www.dehn.de
227
Anti-corrosion Tape
mm pc(s)
Heat-shrinkable Sleeve
Heat-shrinkable sleeve for coating of conductors Rd and Fl e.g. whenfor leading terminal lugs out of the concrete or earth entries out of the ground UV resistant type, customized length
Part No. For use with Rd For use with Fl Material Colour Packing unit 554 011 16 30 DERAY black 1
mm mm
litres pc(s)
228
www.dehn.de
Short design
Long design
17 1 TX40 25 85
1 TX40 25
Part No. Material Thickness of insulating material Length of anchoring depth Working load of Styrofoam PS20 Working load of rigid foam plates Packing unit
50
mm mm N N pc(s)
200 600 PA 60 50 35 60 50
Part No. Material Thickness of insulating material Length of anchoring depth Working load of Styrofoam PS20 Working load of rigid foam plates Packing unit
mm mm N N pc(s)
Part No. Material Thread Length (l1) Length (l2) Packing unit
l2
l1
mm mm pc(s)
www.dehn.de
229
mm g pc(s)
mm g pc(s)
mm g pc(s)
mm g pc(s)
mm pc(s)
www.dehn.de
231
Case with shoulder strap for easy transport and combination lock Equipment includes: 1 coiler with handle for unwinding and 25 m measuring line red, with split plug, Part No. 585 310 1 coiler with handle for unwinding and 50 m measuring line blue, with split plug, Part No. 585 320 2 earth borers 350 mm long, Part No. 587 460 2 measuring lines black 0.75 mm, 3 m long, with split plug on both sides, Part No. 545 010 (connection between earth termination system and earth resistance meter) 1 measuring line red 0.75 mm, 0.5 m long, with split plug on both sides, Part No. 545 010 1 measuring line blue 0.75 mm, 0.5 m long, with split plug on both sides, Part No. 545 011 (connection between coiler and earth borer) 1 test terminal, clamping range 2-21 mm, Part No. 588 000 The case provides an empty compartment for optional support of either FLUKE 1621 or GEOHM C measuring device.
mm pc(s)
Accessories for Earth Resistance Measuring Equipment in a leather case Earth Borer
350 35 135
For use as an auxiliary earth electrode and sensor for measuring of earthing resistances With bore for split plugs of the measuring line
Part No. Terminal Material Length Packing unit 587 460 f M5 TG/gal Zn 350 1
110
15
11
mm pc(s)
24
4.4 25 27 49
Test Clamp up to 21 mm
for earth electrode measuring
Part No. Connection Material Clamping range Clamping spindle Packing unit 588 000 f M5 MCI/tZn 2-21 M8 1
75
33 13
mm pc(s)
35
44
4.4 52 85 50
Test Clamp up to 45 mm
for earth electrode measuring
Part No. Connection Material Clamping range Clamping spindle Packing unit
20
mm pc(s)
42 16
58
232
111
www.dehn.de
Accessories for Earth Resistance Measuring Equipment in a leather case Coiler width 40 mm
Part No. Length of measuring line Colour of measuring line Width Material Packing unit Part No. Length of measuring line Colour of measuring line Width Material Packing unit m mm pc(s) 585 025 25 blue 40 plastic 1 585 050 50 blue 40 plastic 1 585 026 25 red 40 plastic 1 585 051 50 red 40 plastic 1
140
55 40
55
155
m mm pc(s)
55
155
pc(s)
Coiler width 80 mm
Part No. Length of measuring line Colour of measuring line Width Material Packing unit m mm pc(s) 585 210 100 blue 80 plastic 1 585 211 100 red 80 plastic 1
140 95 80
95 195 3
95 195 3
pc(s)
Measuring Line
Part No. Length Cross section Material Designaiton Insulation Colour Packing unit m mm2 545 000 100 0.75 545 001 100 0.75
Cu
H05V-K PVC blue 100
Cu
H05V-K PVC red 100
www.dehn.de
233
Occurrence Counter
Counter for the digital recording of impulse currents The device is preferably installed as a discharge current meter between the equipotential bonding busbar and the earth-termination system. More details in installation instructions No. 1133
46 8
175
48
72
17
58
100
Part No. Operating range Counter Lead-through rod Material of rod Packing unit
mm pc(s)
234
www.dehn.de
Figure 1: New design of lightning protection for thatched roofs (total view)
supporting tube with HVI Conductor I inside heather or sod ridge transom HVI Conductor I installed under the roof to the eaves foil for sealing the mast
EBB
www.dehn.de
235
On thatched roofs the air-termination conductors have to be installed as elevated traverses e.g. on isolating supports. Certain distances have to be kept also to the eaves. For ridge conductors the aspired span width is approx.15 m and for down conductors approx. 10 m without additional supports. Span stakes have to be fastened at the roof construction (rafters and crosspieces) by anchor bolts and flat washers.
110
Wooden Stake
with rain shelter, suitable for clamping cap (Part No. 146 309)
Part No. Material Dimension (l x w x h) Packing unit 145 241 oak (impregnated) 90x90x2400 1
675
mm pc(s).
2400
300
90
168
Clamping Cap
10
for fixing at wood stakes (Part No. 145 241) with air-termination spike (length 300 mm, 10 mm in StSt)
Part No. Material Support Rd Screw Material of screw/nut Packing unit 146 309 StSt 7-10 di M10x110 StSt 1
300
mm mm pc(s).
R5 100 50
2.5
75
236
77
94
www.dehn.de
mm mm pc(s).
60
24
410
30
205
46
148
33 325
m mm pc(s).
174
l1
adjusting range
m mm pc(s).
Guy Clamp
for tightening/guying the cable at the wall
Part No. Material Dimension (l x w x d) Support Rd Bore Screw Material of screw Packing unit 241 009 StSt 150x40x4 8 9 di M8x20 StSt 20
60 42 40
25
mm mm mm mm pc(s).
40
12.5
12
120 150
www.dehn.de
237
238
www.dehn.de
R12 64
25 2
Part No. Cable cross section Cable length (l1) Cable lug open Colour Military name Packing unit Stock No. Part No. Cable cross section Cable length (l1) Cable lug open Colour Military name Packing unit Stock No. Part No. Cable cross section Cable length (l1) Cable lug open Colour Military name Packing unit Stock No.
mm2 m
pc(s)
410 003 410 005 410 006 410 010 410 015 410 020 10 10 10 10 10 10 0,35 0,55 0,65 1,05 1,55 2,05 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 black black black black black black VG 96927 T011 A044 VG 96927 T011 A045 VG 96927 T011 A046 VG 96927 T011 A047 VG 96927 T011 A048 VG 96927 T011 A049 1 1 1 1 1 1 6150-12-156-9107 6150-12-156-8386 6150-12-156-9108 6150-12-156-8387 6150-12-156-9069 6150-12-156-9073 410 025 410 030 410 035 410 040 410 050 410 060 10 10 10 10 10 10 2,55 3,05 3,55 4,05 5,05 6,05 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 black black black black black black VG 96927 T011 A050 VG 96927 T011 A051 VG 96927 T011 A052 VG 96927 T011 A053 VG 96927 T011 A054 VG 96927 T011 A055 1 1 1 1 1 1 6150-12-156-9072 6150-12-156-9109 6150-12-156-9071 6150-12-156-9070 6150-12-156-6051 6150-12-156-9110 410 070 410 099 410 140 410 150 410 199 410 299 10 10 10 10 10 10 7,05 10,0 14,0 15,0 20,0 30,0 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 black black black black black black VG 96927 T011 A056 VG 96927 T011 A057 VG 96927 T011 A058 VG 96927 T011 A059 VG 96927 T011 A060 VG 96927 T011 A061 1 1 1 1 1 1 6150-12-156-9111 6150-12-156-9112 6150-12-156-6207 6150-12-161-4272 6150-12-156-9113 6150-12-156-9114
mm2 m
pc(s)
mm2 m
pc(s)
10 .4 8
25
23 13
R12
25 64
10 46
5 6
Part No. Cable cross section Cable length (l1) Cable lug open Colour Military name Packing unit Stock No.
mm2 m
pc(s)
410 615 10 1.55 1xM8/M10 1xM5/M6 black VG 96927 T011 A123 1 6150-12-308-6928
15
www.dehn.de
239
R12 64
te
25 2
s ted
Part No. Cable cross section Cable length (l1) Cable lug open Colour Military name Packing unit Stock No. Part No. Cable cross section Cable length (l1) Cable lug open Colour Military name Packing unit Stock No. Part No. Cable cross section Cable length (l1) Cable lug open Colour Military name Packing unit Stock No.
mm2 m
pc(s)
416 003 416 005 416 006 416 010 416 015 416 020 416 025 416 030 16 16 16 16 16 16 16 16 0,35 0.55 0.65 1.05 1.55 2.05 2.55 3.05 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 black black black black black black black black VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 A062 A063 A064 A065 A066 A067 A068 A069 1 1 1 1 1 1 1 1 6150-126150-126150-126150-126150-126150-126150-126150-12156-9115 156-9085 156-9116 156-9084 156-9117 156-9118 156-9119 156-9083
416 035 416 040 416 050 416 060 416 070 416 080 416 100 16 16 16 16 16 16 16 3.55 4.05 5.05 6.05 7.05 8.05 10.05 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 black black black black black black black VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 A070 A071 A072 A073 A074 A075 A076 pc(s) 1 1 1 1 1 1 1 6150-12-156-6208 6150-12-156-8388 6150-12-156-9120 6150-12-156-9082 6150-12-156-9121 6150-12-188-4475 6150-12-156-9122 mm2 m 416 120 416 140 416 150 416 200 416 220 416 280 416 300 16 16 16 16 16 16 16 12.05 14.05 15.05 20.05 22.05 28.05 30.03 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 2xM8/M10 black black black black black black black VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 A077 A078 A079 A080 A081 A082 A083 pc(s) 1 1 1 1 1 1 1 6150-12-188-4476 6150-12-156-9123 6150-12-161-4273 6150-12-156-9124 6150-12-188-4477 6150-12-188-4478 6150-12-156-9125 mm2 m
10 .4 8
25
23 13
R12
25 64
10 46
5 6
Part No. Cable cross section Cable length (l1) Cable lug open Colour Military name Packing unit Stock No.
mm2 m
pc(s)
416 516 16 1,55 1xM8/M10 1xM5/M6 black VG 96927 T011 A125 1 6150-12-308-6607
240
6
www.dehn.de
15
R12 64
25 2
Part No. Cable cross section Cable length (l1) Cable lug open Colour Packing unit Stock No. Part No. Cable cross section Cable length (l1) Cable lug open Colour Packing unit Stock No.
mm2 m
pc(s)
417 005 16 0.55 2xM8/M10 green-yellow 1 6150-12-313-5059 417 100 16 10.05 2xM8/M10 green-yellow 1 6150-12-313-5065
417 010 16 1.05 2xM8/M10 green-yellow 1 6150-12-313-5060 417 115 16 15.05 2xM8/M10 green-yellow 1 6150-12-313-5066
417 015 16 1.55 2xM8/M10 green-yellow 1 6150-12-313-5061 417 120 16 20,05 2xM8/M10 green-yellow 1 6150-12-313-5067
417 020 16 2.05 2xM8/M10 green-yellow 1 6150-12-313-5062 417 125 16 25.05 2xM8/M10 green-yellow 1 6150-12-185-8587
417 030 16 3.05 2xM8/M10 green-yellow 1 6150-12-313-5063 417 130 16 30.05 2xM8/M10 green-yellow 1 6150-12-313-5068
417 050 16 5.05 2xM8/M10 green-yellow 1 6150-12-313-5064 417 150 16 50.05 2xM8/M10 green-yellow 1 6150-12-174-2744
mm2 m
pc(s)
8.5
25
R12
25 64
10 46
5 6
Part No. Cable cross section Cable length (l1) Cable lug open Cable lug closed Bore Colour Military name Packing unit Stock No.
410 503 410 506 410 510 410 515 410 520 410 525 410 530 10 10 10 10 10 10 10 0,35 0.65 1.05 1.55 2.05 2.55 3.05 M5/M6 M5/M6 M5/M6 M5/M6 M5/M6 M5/M6 M5/M6 M8 M8 M8 M8 M8 M8 M8 mm 8,5 8.5 8.5 8.5 8.5 8.5 8.5 black black black black black black black VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 A116 A117 A118 A119 A120 A121 A122 pc(s) 1 1 1 1 1 1 1 6150-12-196-7302 6150-12-195-9694 6150-12-196-7304 6150-12-196-7303 6150-12-196-7606 6150-12-198-6807 6150-12-198-6808 mm2 m
15
www.dehn.de
241
R12
R12
25 64
25
10 8 .4
64
8 2
Part No. Cable cross section Cable length (l1) Cable lug open Cable lug closed Bore Colour Military name Packing unit Stock No. Part No. Cable cross section Cable length (l1) Cable lug open Cable lug closed Bore Colour Military name Packing unit Stock No.
mm2 m
mm
pc(s)
410 401 10 0.20 M8/M10 M8 8.5 black VG 96927 T011 A092 1 6150-12-300-9132 410 411 10 1.05 M8/M10 M8 8.5 black VG 96927 T011 A097 1 6150-12-192-5457
410 403 10 0.35 M8/M10 M8 8.5 black VG 96927 T011 A093 1 6150-12-195-9490 410 415 10 1.55 M8/M10 M8 8.5 black VG 96927 T011 A098 1 6150-12-192-5458
410 404 10 0.45 M8/M10 M8 8.5 black VG 96927 T011 A094 1 6150-12-192-5455 410 420 10 2.05 M8/M10 M8 8.5 black VG 96927 T011 A099 1 6150-12-198-1217
410 450 10 0.55 M8/M10 M8 8.5 black VG 96927 T011 A095 1 6150-12-197-0088 410 425 10 2.55 M8/M10 M8 8.5 black VG 96927 T011 A100 1 6150-12-198-6803
410 406 10 0.65 M8/M10 M8 8.5 black VG 96927 T011 A096 1 6150-12-192-5456 410 430 10 3.05 M8/M10 M8 8.5 black VG 96927 T011 A101 1 6150-12-198-6805
mm2 m
mm
pc(s)
R12
25 64
25
10 8 .4
64
8 2
Part No. Cable cross section Cable length (l1) Cable lug open Cable lug closed Bore Colour Military name Packing unit Stock No.
mm2 m
mm
pc(s)
410 413 410 405 410 407 410 410 410 416 410 421 410 426 410 431 10 10 10 10 10 10 10 10 0.35 0.55 0.65 1.05 1.55 2.05 2.55 3.05 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M10 M10 M10 M10 M10 M10 M10 M10 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 black black black black black black black black VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 A085 A085 A086 A087 A088 A089 A090 A091 1 1 1 1 1 1 1 1 6150-126150-126150-126150-126150-126150-126150-126150-12196-7301 196-6346 198-7027 171-2783 198-1216 198-1218 198-6804 198-6806
242
www.dehn.de
Earthing Material for Telecommunications Cable lug, 1x open M5/M6 and 1x closed M8
l1 8.5
23 13
25
R12
25 64
10 46
5 6
Part No. Cable cross section Cable length (l1) Cable lug open Cable lug closed Bore Colour Military name Packing unit Stock No.
mm2 m
mm
pc(s)
416 505 16 0.55 M5/M6 M8 8.5 black VG 96927 T011 A124 1 6150-12-300-9131
R12
25 64
25
10 8 .4
64
Part No. Cable cross section Cable length (l1) Cable lug open Cable lug closed Bore Colour Military name Packing unit Stock No.
416 411 416 415 416 420 416 425 416 430 416 440 416 450 16 16 16 16 16 16 16 1.05 1.55 2.05 2.55 3.05 4.05 5.05 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8 M8 M8 M8 M8 M8 M8 mm 8.5 8.5 8.5 8.5 8.5 8.5 8.5 black black black black black black black VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 A109 A110 A111 A112 A113 A114 A115 pc(s) 1 1 1 1 1 1 1 6150-12-308-6934 6150-12-308-6981 6150-12-308-6933 6150-12-308-6932 6150-12-308-6931 6150-12-308-6930 6150-12-308-6929 mm2 m
R12
25 64
25
64
te
10 8 .4
s ted
Part No. Cable cross section Cable length (l1) Cable lug open Cable lug closed Bore Colour Military name Packing unit Stock No.
mm2 m
mm
pc(s)
416 410 416 416 416 421 416 426 416 431 416 441 416 451 16 16 16 16 16 16 16 1.05 1.55 2.05 2.55 3.05 4.05 5.05 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M8/M10 M10 M10 M10 M10 M10 M10 M10 10.5 10.5 10.5 10.5 10.5 10.5 10.5 black black black black black black black VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 A102 A103 A104 A105 A106 A107 A108 1 1 1 1 1 1 1 6150-126150-126150-126150-126150-126150-126150-12308-6941 308-6940 308-6939 309-6938 308-6937 308-6936 308-6935 243
www.dehn.de
15
10.5
R12
25 64
8 2
Part No. Cable cross section Cable length (l1) Cable lug closed Bore Colour Military name Packing unit Stock No.
mm2 m mm
pc(s)
410 903 410 905 410 906 410 910 410 915 410 920 410 925 410 930 10 10 10 10 10 10 10 10 0.35 0.55 0.65 1.05 1.55 2.05 2.55 3.05 2xM10 2xM10 2xM10 2xM10 2xM10 2xM10 2xM10 2xM10 10.5 10.5 10.5 10.5 10.5 10.5 10.5 10.5 black black black black black black black black VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 VG 96927 T011 A027 A028 A029 A030 A031 A032 A033 A034 1 1 1 1 1 1 1 1 6150-126150-126150-126150-126150-126150-126150-12198-1948 198-6809 198-6810 198-1482 168-2696 168-2695 168-2694
10.5
R12
25 64
te
s ted
8 2
Part No. Cable cross section Cable length (l1) Cable lug closed Bore Colour Military name Packing unit Stock No. Part No. Cable cross section Cable length (l1) Cable lug closed Bore Colour Military name Packing unit Stock No.
mm2 m mm
pc(s)
416 903 16 0.35 2xM10 10.5 black VG 96927 T011 A035 1 6150-12-198-6812 416 920 16 2.05 2xM10 10.5 black VG 96927 T011 A040 1 6150-12-198-6815
416 905 16 0.55 2xM10 10.5 black VG 96927 T011 A036 1 6150-12-198-6813
416 906 16 0.65 2xM10 10.5 black VG 96927 T011 A037 1 6150-12-198-6814
416 910 16 1.05 2xM10 10.5 black VG 96927 T011 A038 1 6150-12-168-9942
416 915 16 1.55 2xM10 10.5 black VG 96927 T011 A039 1 6150-12-168-2693 416 970 16 7.05 2xM10 10.5 black VG 96927 T011 A043 1 6150-12-168-2692
mm2 m mm
pc(s)
416 925 16 2.55 2xM10 10.5 black VG 96927 T011 A041 1 6150-12-198-6816
416 930 16 3.05 2xM10 10.5 black VG 96927 T011 A042 1 6150-12-198-1483
244
www.dehn.de
R12
4.5
25
10
8 .4
64
Part No. Cable cross section Cable length (l1) Cable lug open Pin terminal Colour Military name Packing unit Stock No.
mm2 m
pc(s)
410 720 10 2.05 M8/M10 size 10 (d = 4.3) black VG 96927 T011 A127 1 6150-12-308-6979
30 18
2
R12
25
10
8 .4
64
Part No. Cable cross section Cable length (l1) Cable lug open Pin terminal Colour Military name Packing unit Stock No.
mm2 m
pc(s)
416 016 16 1.55 M8/M10 size 16 (d = 5.4) black VG 96927 T011 A128 1 6150-12-178-9673
4.5
25 64
R12
Part No. Cable cross section Cable length (l1) Cable lug closed Bore Pin terminal Colour Military name Packing unit Stock No.
www.dehn.de
mm2 m mm
pc(s)
410 606 10 0.65 M8 8.5 size 10 (d = 4,3) black VG 96927 T011 A126 1 6150-12-304-4604 245
open M5/M6
open M8/M10
R12
15
5
6 2
6
8 2
10 8 .4
46
23 13
16 25
Part No. Cable cross section Cable lug fitting Material Military name Packing unit Stock No.
mm2
pc(s)
444 006 6-16 M5/M6 Cu/gal Sn VG 96933 T14 A002A 100 5940-12-156-9126
10
Part No. Cable cross section Cable lug fitting Material Military name Packing unit Stock No.
16
mm2
pc(s)
444 010 6-16 M8/M10 Cu/gal Sn VG 96933 T14 A001A 100 5940-12-152-3867
closed M8
closed M10
25
64
10.5
8.5
8
R12
8
R12
2 64 2
2 64 2
16
16
Part No. Cable cross section Cable lug fitting Material Military name Packing unit Stock No.
mm2
pc(s)
25
Part No. Cable cross section Cable lug fitting Material Military name Packing unit Stock No.
mm2
pc(s)
444 009 6-16 M10 Cu/gal Sn VG 96933 T14 B002A 100 5940-12-156-9127
246
25
www.dehn.de
Earthing Clamps
Small design
Large design
44
67
21
90
50
85
140
176
42
70
16
20
110
20
58
71
Part No. Material of clamping body Material of spindle Clamping range of pipe Terminal cross section Military name Packing unit Stock No.
mm mm2 pc(s)
435 805 TG/tZn St/gal Zn 4-45 (3/8 - 11/4'') 6-16 VG 96953 T06 A0001 1 5999-12-156-9129
Part No. Material of clamping body Material of spindle Clamping range of pipe Terminal cross section Military name Packing unit Stock No.
28
134
126
52
77
mm mm2 pc(s)
435 803 TG/tZn St/gal Zn 12-60 (1/2 - 2'') 6-16 VG 96953 T06 B0001 10 5999-12-156-2656
Earthing Busbars
Earthing busbars with slot and rotation locking, for fixing at the earthing pipe
Three-pole design
Five-pole design
21
35
55 181
55
21
35
55
55 290
55
55
7.5
7.5
Part No. Material of busbar Length Screw Nut Material of screw/nut Military name Packing unit Stock No.
mm mm
pc(s)
465 801 St/tZn 181 di M10x35 wing nut M10 StSt VG 96953 T07 A0001 1 5940-12-156-8385
Part No. Material of busbar Length Screw Nut Material of screw/nut Military name Packing unit Stock No.
mm mm
pc(s)
466 192 St/tZn 290 di M10x35 wing nut M10 StSt VG 96953 T07 B0001 1 5940-12-188-4931
www.dehn.de
247
Earthing Spike
3
50
50
20
10
Part No. Material of profile Profile Length (l1) Screw Nut Material of screw/nut Military name Packing unit Stock No.
l1
mm mm mm
pc(s)
634 145 634 160 St/tZn St/tZn 50x50x3 50x50x3 450 600 di M8x40 di M8x40 wing nut M8 wing nut M8 StSt StSt VG 96953 T10 D0003 VG 96953 T10 D0004 1 1 5975-12-166-0114 5975-12-153-8505
Anchoring Pole
32 25 3.6
70
Anchoring pole for guying rod sections and batten shears e.g. in case of an elevated spanning of telecommunication cables
10
29 25 R23 43 28 R14 20
Part No. Material of profile Profile Length Design Military name Packing unit Stock No.
mm mm
pc(s)
466 203 MCI/tZn 25x25x3 405 hole 28 mm VG 96953 T10 E0001 1 4030-12-320-9037
15
248
405
www.dehn.de
120
Part No. Material Pipe Length Screw Material of screw Military name Packing unit Stock No.
mm mm
pc(s)
646 000 St/tZn 34 600 wing nut M8 StSt VG 96953 T010 B0001 1 5975-12-133-4342
30
770
mm mm
pc(s)
644 000 St/tZn 1000 di M10x35 StSt VG 96953 T10 A0001 1 5975-12-120-0006
130
1000
52
www.dehn.de
249
250
www.dehn.de
Pipe clamp for electrical contacting of pipes in explosion-hazard areas for implementing of lightning equipotential bonding according to EN 62305-3
Usable in potentially explosive atmospheres Ex zones 1 and 2 (gases, vapours, mists) as well as Ex zones 21 and 22 (dusts) 1 Tested according to explosion group IIB 1 Time-saving installation no need to deactivate systems/areas for welding or drilling works So far equipotential bonding and lightning equipotential bonding of pipes in explosion-hazard areas has been implemented by means of welded or threaded bushing connections. Using clamps was only permitted if evidence of no ignition sparking in case of lightning current loading was provided. Such proof has now been rendered for a pipe clamp by DEHN + SHNE. In compliance with and tested according to EN 50164-1 (VDE 0185-201) title English: Requirements for connection components (clamps and connectors) in a potentially explosive atmosphere, the sample passed the test to give no rise ot ignition sparking at a lightning current loading of up to 50 kA (10/350 s). This new pipe clamp for explosion-risk areas not only ensures the safe electrical contact by means of two contact clips, but also the adequate mechanical fixing by an electrically insulated clamping body.
1
DECLARATION OF MANUFACTURER
Product: Product description:
Manufacturer:
Application: The pipe clamp for explosive zones is used for connecting pipes of different materials and diameters to the lightning equipotential bonding structure in explosive atmospheres. Lightning currents are discharged without formation of sparks as specified in the technical data sheet. We herewith confirm that the pipe clamp for explosive zones is suitable for the use in explosive zones 1 and 2 (gas, vapour, mist) and explosive zones 21 and 22 (combustible dust) in connection with the installation instructions, P
The Ex pipe clamp provides following connection possibilities round conductors made of Cu, St/tZn, Al, StSt with 8 mm or stranded copper conductors, cross section 16-35 mm, with E-Cu crimping cable lug (DIN 46235) flat copper conductors with minimum dimensions of 20x2.5 mm and a bore of 10.5 mm More details in installation instructions No. 1599
not legally admissible and not necessary with respect to explosion protection.
www.dehn.de
251
11 73 39
11
120
0.25 107
11
Part No. Lightning impulse current (10/350) Cu 6-12 mm (Iimp) Lightning impulse current (10/350) Cu 12-26.9 mm (Iimp) Lightning impulse current (10/350) Cu 26.9 mm (Iimp) Lightning impulse current (10/350) St/tZn 17.2-26.9 mm (Iimp) Lightning impulse current (10/350) StSt 6-12 mm (Iimp) Lightning impulse current (10/350) StSt 12-26.9 mm (Iimp) Lightning impulse current (10/350) StSt 26.9 mm (Iimp) Clamping range of pipe Material of clamping body Material of grip head/tensioning strap Material of contact clip Standard Packing unit
l1
te
10
s ted
kA kA kA kA kA kA kA mm
pc(s)
10
30
1.5
1.5 30 66 135 23 30 34
te
s ted
26 35 40
23
l1 2.5 17
Part No. Lightning impulse current (10/350) Cu (Iimp) Lightning impulse current (10/350) St/tZn (Iimp) Lightning impulse current (10/350) St/blank (Iimp) Lightning impulse current (10/350) StSt (Iimp) Clamping range of pipe Material of clamping body Material of grip head/tensioning strap Material of contact clip Standard Packing unit 252
kA kA kA kA mm
pc(s)
to 500 mm
3 86 73
20 10 108
66 135
23
30 34
26 35 40
23
2.5 17
te
s ted
Part No. Lightning impulse current (10/350) Cu (Iimp) Lightning impulse current (10/350) St/tZn (Iimp) Lightning impulse current (10/350) StSt (Iimp) Clamping range of pipe Material of clamping body Material of grip head/tensioning strap Material of contact clip Standard Packing unit
kA kA kA mm
pc(s)
Accessory Part for Pipe Clamps for Explosion Hazard Areas Tensioning Strap
Part No. Material Dimension of strap (l x w x d) Length Packing unit 540 901 StSt ...x25x0.3 100 1
mm m pc(s)
www.dehn.de
253
Spark Gaps
For indirect connection of an overhead line roof pole to the external lightning protection system Corrosion-resistant stainless steel connections
The DSFS spark gap allows for indirect connection of an overhead line roof pole to the external lightning protection system in accordance with IEC 62305.
13 40
142
67
11
30
Part No. 100% Lightning impulse sparkover voltage (1,2/50 s) Uas100 Nominal discharge current (8/20 s) In Degree of protection Power frequency sparkover voltage (50 Hz) Uaw Material (connection) Connection Enclosure material Packing unit
920 000
920 000
kV kA
kV mm pc(s)
12
te
s ted
l1
30
Part No. Clamping range pipe Material Bore Screw Material of screw/nut Dimension (l1 x r1) Packing unit
mm mm mm mm pc(s)
11
40
76/89
Part No. Clamping range pipe Material Conductor holder support Rd Conductor leading Screw Material of screw/nut Packing unit
35
mm mm mm pc(s)
28
148/161
254
www.dehn.de
Spark Gaps
For indirect connection/earthing of functionally isolated installation components when being affected by lightning For lightning equipotential bonding application according to IEC 62305 With corrosion-resistant stainless steel connections For mounting inside of buildings, outdoors, in damp rooms as well as for underground installation Extremely heavy-duty devices
TFS: KFSU:
TFS / KFSU
Isolating spark gaps with plastic coating and 2 connections (Rd 10 mm) made of stainless steel
Type Part No. Lightning impulse current (10/350 s) Iimp Classification of lightning current carrying capability according to EN 50164-3 Nominal discharge current (8/20 s) In Rated power-frequency withstand voltage (50 Hz) UW/AC 100 % Lightning impulse sparkover voltage Urimp Power frequency sparkover voltage (50 Hz) Uaw Operating temperature range TU Degree of protection Length Diameter of enclosure Enclosure material Connection Rd Material (connection) Packing unit
kA
TFS 923 023 100 H 100 300 4 2.5 -20 ... +80 IP 65 160 43 steel-plastic coating 10 stainless steel 1
KFSU 923 021 100 300 4 2.5 -20 ... +80 IP 65 160 43 steel-plastic coating 10 stainless steel 1
kA V kV kV C mm mm mm pc(s)
www.dehn.de
255
Spark Gaps
For indirect connection/earthing of functionally isolated installation components when being affected by lightning Device for lightning equipotential bonding according to IEC 62305 in explosion-hazard areas For bridging insulating pieces, insulating flanges etc. in cathodically corrosion-protected pipe sections For safe installation in explosion protected zone 1 (gas) or 21 (dust) Especially low sparkover voltage Especially high a.c. current withstand capability
EXFS 100:
Isolating spark gap for use in explosionhazard areas with plastic coating and M10 connecting thread nut EXFS 100 KU: Isolating spark gap for use in explosionhazard areas with 2 m connecting cable for underground installation
The Ex isolating spark gaps of the EXFS 100 / EXFS 100 KU product family are used when conductive installation components situated in explosion-hazard areas cannot be connected directly with each other. The spark gaps with low sparkover voltage are especially efficient for isolated installation components with little insulation resistance. No special regulations have to be observed for safe application in zone 1 with gases or zone 21 with dusts. With a maximum lightning impulse current of 100 kA (10/350 s), EXFS 100 and EXFS 100 KU meet class H according to EN 50164-3 Lightning Protection Components (LPC) Part 3: Requirements for isolating spark gaps. The ATEX-certified spark gaps EXFS 100 and EXFS 100 KU provide approved safety according to harmonised European standards. For connecting EXFS 100 spark gaps, prewired connecting cables with different lengths are available as accessories. Flat and angled connection brackets (IF) make it easier to connect the spark gaps to pipe flanges. EXFS 100 KU types are enclosed by a damp-proof plastic coating and can therefore be ideally used for underground installation at insulating couplings.
Baumusterprfbescheinigung 256
www.dehn.de
Ex isolating spark gap with plastic coating and M10 connecting thread nuts
Installation of EXFS 100 Type Part No. Lightning impulse current (10/350 s) Iimp Classification of lightning current carrying capability according to EN 50164-3 Nominal discharge current (8/20 s) In Rated power-frequency withstand voltage (50 Hz) UW/AC 100 % Lightning impulse sparkover voltage Urimp Power frequency sparkover voltage (50 Hz) Uaw Rated discharge current (50 Hz) Imax (Ex) Marking according to EN 60079: gas (Ex) Marking according to EN 61241: dust Operating temperature range TU Degree of protection Approvals, Certifications Length of enclosure Diameter of enclosure Enclosure material Connection of enclosure Packing unit EXFS 100 923 100 100 H 100 250 1.25 * 0.3 500 A / 0.5 (TU: 45 C) II 2G Ex d IIC T6 II D Ex tD A21 IP67 T 80 C -20 ... +60 IP 67 BVS 06 ATEX E 099, IECEx KEM 09.0051... 100 45.5 plastic coating thread nut M10, 2x M10x25 mm, 2x spring washer 1
kA
923 100
kA V kV kV sec.
mm mm
pc(s)
Accessory Parts for EXFS 100 / EXFS 100 KU EXFS 100: Connecting cable, Cu 25 mm2
Connecting cable for EXFS 100; two cable lugs 10.5 mm; hexagon screw and nut (M10), StSt(V2A) and spring washer
Type Part No. Cable lug material Screw /nut material Cross section Cable length Packing unit AL EXFS L100 KS AL EXFS L200 KS AL EXFS L300 KS 923 025 923 035 923 045 Cu/gal Sn Cu/gal Sn Cu/gal Sn NIRO NIRO NIRO mm2 25 25 25 mm 100 200 300 pc(s) 1 1 1
pc(s)
pc(s)
Spark Gaps
insulation / Isolierung
Type Part No. Lightning impulse current (10/350 s) Iimp Classification of lightning current carrying capability according to EN 50164-3 Nominal discharge current (8/20 s) In Rated power-frequency withstand voltage (50 Hz) UW/AC 100 % Lightning impulse sparkover voltage Urimp Power frequency sparkover voltage (50 Hz) Uaw Rated discharge current (50 Hz) Imax (Ex) Marking according to EN 60079: gas (Ex) Marking according to EN 61241: dust Operating temperature range TU Degree of protection Approvals, Certifications Length of enclosure Diameter of enclosure Enclosure material Connection of enclosure Cable length Packing unit
kA
EXFS 100 KU 923 101 100 H 100 250 1.25 * 0.3 500 A / 0.5 (TU: 45 C) II 2G Ex d IIC T6 II 2D Ex tD A21 IP67 T 80 C -20 ... +60 IP 67 BVS 06 ATEX E 099, IECEx KEM 09.0051... 123 34 plastic coating; water-proof coating NYY-J-1x25 mm2, 2x approx. 2 1
kA V kV kV sec.
923 101
mm mm
m Stk.
258
www.dehn.de
Spark Gaps
For indirect connection/earthing of functionally isolated installation components when being affected by lightning Device for lightning equipotential bonding acc. to IEC 62305 in explosion-hazard areas (Zone 2) According to ATEX Directive 94/9/EC Corrosion-resistant zinc diecasting enclosure with plastic cover and flexible conductor connection For bridging insulating pieces, insulating flanges etc. in cathodically corrosion protected pipe sections Extremely heavy-duty device
EXFS L ...: Isolating spark gap for use in explosion-hazard areas with flexible connecting cable EXFS KU: Isolating spark gap for use in explosion-hazard areas with 1.5 m connecting cable for underground installation
Ex isolating spark gaps of the EXFS L / EXFS KU product family are used when the direct interconnection of electrically conductive installation components in Ex areas is not applicable. As, for example, in case of cathodically corrosion protected pipeline sections. ATEX-certified EXFS L and EXFS KU spark gaps provide approved and tested safety in accordance with harmonised European standards. The arc-resistant tungsten-copper electrodes ensure a long service life of the Ex spark gaps. The approved type EXFS L with flexible conductor connection quickly adapts to any application environment. The prewired spark gaps provide connecting cables with different lengths with cable lugs, screws and M10 nut. The flat or angled connection brackets (IF), which are available as accessories, allow for easy connection of the spark gap to pipeline flanges. The EXFS KU type is enclosed in a damp-proof PVC enclosure and is ideal for underground installation at insulating couplings.
www.dehn.de
259
Spark Gaps
Installation of EXFS Type Part No. Lightning impulse current (10/350 s) Iimp Classification of lightning current carrying capability according to EN 50164-3 Nominal discharge current (8/20 s) In Rated power-frequency withstand voltage (50 Hz) UW/AC 100 % Lightning impulse sparkover voltage Urimp Power frequency sparkover voltage (50 Hz) Uaw Type of protection according to EN 50014, EN 50021 Operating temperature range TU Degree of protection Approvals, Certifications Length of enclosure Diameter of enclosure Enclosure material Connecting cable Cable length Suitable for flange size Packing unit EXFS L100 923 060 50 EXFS L200 923 061 50 EXFS L300 923 062 50
923 060 923 061 923 062
kA
kA V kV kV C
mm mm
mm mm pc(s)
N N N 100 100 100 300 300 300 2.5 2.5 2.5 1.2 1.2 1.2 II 3 G EEx nC II T4 II 3 G EEx nC II T4 II 3 G EEx nC II T4 -20 ... +80 -20 ... +80 -20 ... +80 IP 54 IP 54 IP 54 ZELM 03 ATEX 3192X ZELM 03 ATEX 3192X ZELM 03 ATEX 3192X 90 90 90 63 63 63 zinc diecasting, plastic zinc diecasting, plastic zinc diecasting, plastic H01N2-D 25 mm2 with cable lug H01N2-D 25 mm2 with cable lug H01N2-D 25 mm2 with cable lug and screw/nut (M10) and screw/nut (M10) and screw/nut (M10) 100 200 300 20-130 120-230 220-320 1 1 1
Accessory Parts for EXFS 100 / EXFS 100 KU Pair of angled connection brackets IF 1
Pair of angled connection brackets for EXFS ...; diameter corresponds to bolt diameter of the bolted flange joint (d1 up to max. 60 mm, please indicate the diameter required when placing your order)
Part No. Cable lug material Packing unit 923 011 St/tZn 1
923 011
pc(s)
pc(s)
260
www.dehn.de
Ex isolating spark gap with connecting cables for aboveground and underground installation
923 019
Type Part No. Lightning impulse current (10/350 s) Iimp Classification of lightning current carrying capability according to EN 50164-3 Nominal discharge current (8/20 s) In Rated power-frequency withstand voltage (50 Hz) UW/AC 100 % Lightning impulse sparkover voltage Urimp Power frequency sparkover voltage (50 Hz) Uaw Type of protection according to EN 50014, EN 50021 Operating temperature range TU Degree of protection Approvals, Certifications Length of enclosure Diameter of enclosure Enclosure material Connecting cable Cable length Packing unit
kA
EXFS KU 923 019 50 N 100 300 2.5 1.2 II 3 G EEx nC II T4 -20 ... +80 IP 67 ZELM 03 ATEX 3192X 90 63 zinc diecasting, plastic NYY-J-1x25 2x approx. 1.5 1
kA V kV kV C
mm mm mm2 m pc(s)
www.dehn.de
261
262
www.dehn.de
Part No. 104 150 104 200 104 250 104 300 104 600 104 903 104 905 104 906
Part No. 105 800 105 850 105 912 105 914 106 008 106 090 106 100 106 105 106 110 106 115 106 120 106 121 106 123 106 125 106 126 106 127 106 128 106 129 106 150 106 160 106 165 106 170 106 175 106 178 106 180 106 185 106 207 106 210 106 214 106 217 106 220 106 225 106 226 106 228 106 245 106 246 106 248 106 301 106 309 106 310 106 311 106 312 106 315 106 316 106 319 106 321 106 322 106 323 106 324 106 325 106 326 106 328 106 331 106 340 106 341 106 342 106 352 106 353 106 760 106 812
Page 37 37 38 38 32 44 44 44 44 43 43 60 43 45 46 46 46 46 45 45 46 46 46 46 46 46 50 50 50 50 50 44 44 44 45 45 45 47 47 47 47 60 47 47 49 48 48 48 48 49 49 60 60 49 49 49 47 48 67 69
Part No. 106 813 106 852 106 898 106 899 108 009 110 000 110 017 123 021 123 031 123 109 123 425 123 430 123 435 145 241 146 309 200 027 200 029 200 039 200 057 200 059 200 067 200 069 200 077 200 079 200 087 200 089 200 600 200 601 202 000 202 001 202 005 202 008 202 010 202 015 202 017 202 020 202 021 202 027 202 030 202 037 202 040 202 050 202 060 202 080 202 169 202 227 202 830 202 831 202 832 202 835 202 836 202 837 202 840 202 841
Page 69 69 68 69 32 32 32 28 29 24 28 28 28 236 236 124 124 124 124 124 124 124 124 124 124 124 229 229 123 123 115 107 107 115 107 103 103 103 114 107 107 108 114 108 123 103 69 68 69 88 88 88 69 68
Part No. 202 842 202 890 202 900 202 901 202 902 202 906 204 001 204 002 204 003 204 004 204 006 204 007 204 017 204 027 204 029 204 037 204 039 204 049 204 059 204 069 204 079 204 089 204 107 204 109 204 120 204 127 204 129 204 147 204 149 204 157 204 159 204 169 204 170 204 171 204 177 204 179 204 187 204 189 204 197 204 199 204 229 204 239 204 247 204 249 204 267 204 269 204 359 204 447 204 449 204 467 204 469 204 906 204 911 204 913 204 916 204 921 204 924 204 925 204 935 204 936
Page 69 68 103 107 107 115 118 118 118 118 118 118 118 118 103 118 103 109 109 109 109 104 102 102 118 102 102 104 104 104 104 104 105 105 104 104 104 104 104 104 110 110 101 101 101 101 108 101 101 101 101 115 102 102 115 104 104 104 106 106
Part No. 204 937 204 938 204 949 204 957 206 105 206 109 206 170 206 171 206 207 206 209 206 217 206 219 206 227 206 229 206 237 206 239 206 247 206 249 206 309 206 319 206 329 206 339 206 349 206 359 206 369 206 389 206 399 206 437 206 439 206 447 206 449 206 509 206 807 206 809 206 817 206 819 207 009 207 019 207 029 207 039 207 109 216 000 223 000 223 010 223 011 223 020 223 021 223 031 223 040 223 041 223 070 239 000 239 001 239 009 239 019
Page 106 106 106 106 115 102 105 105 105 105 105 105 105 105 101 101 101 101 105 105 105 115 110 108 110 109 109 101 101 101 101 106 102 102 102 102 117 117 117 117 117 103 108 111 111 112 112 112 111 111 111 237 237 237 237
263
Part No. 274 260 275 019 275 030 275 110 275 113 275 116 275 120 275 129 275 160 275 220 275 225 275 229 275 230 275 239 275 260 275 320 275 330 275 333 275 420 275 430 275 499 275 520 275 521 275 711 275 716 275 730 276 006 276 007 276 009 276 016 276 017 276 056 276 057 277 130 277 230 277 237 277 239 277 240 284 030 284 040
Page 126 128 130 121 121 127 67 97 121 97 67 97 130 67 127 67 67 67 93 93 93 70 70 125 125 125 120 120 120 120 120 14 14 224 131 131 131 131 130 130
Part No. 301 000 301 007 301 009 301 010 301 017 301 019 301 229 301 239 301 329 301 339 302 010 305 000 305 007 306 020 306 029 306 100 306 101 307 000 307 007 308 001 308 025 308 026 308 030 308 035 308 040 308 041 308 045 308 046 308 060 308 070 308 120 308 129 308 150 308 220 308 229 308 230 308 239 308 249 308 320 308 329 308 330
Page 136 136 137 136 136 137 66 66 66 66 137 139 139 139 139 139 139 139 139 202 200 200 200 183 135 135 201 183 146 146 202 202 203 145 145 145 145 145 145 145 145
Part No. 318 033 318 201 318 207 318 209 318 219 318 233 318 251 318 252 319 201 319 202 319 207 319 209 319 219 319 229 320 044 321 045 321 047 338 000 338 001 338 007 338 009 339 010 339 050 339 051 339 057 339 059 339 060 339 061 339 067 339 069 339 100 339 101 339 110 339 111 339 157 339 167 343 000 343 007 345 008 345 010
Page 144 143 143 143 143 144 143 144 142 143 142 142 143 142 144 142 142 154 154 154 154
Part No. 365 031 365 037 365 039 365 040 365 047 365 050 365 051 365 057 365 059 365 117 365 127 365 220 365 221 365 227 365 229 365 419 365 519 370 014 370 018 371 007 371 008 371 009 372 018
Page 150 150 150 151 151 152 152 152 152 151 151 152 152 152 152 163 163 147 147 147 147 147 149 149 149 149 148 148 148 148 148 148 148 148 148 148 149 149 148 148 149 149 159 159
Part No. 377 115 377 200 377 210 377 310 377 410 377 510 380 020 380 029 380 110 380 116 385 202 385 203 385 207 385 213 385 216 390 050 390 051 390 057 390 059 390 060 390 061 390 067 390 079 390 110 390 119 390 150 390 157 390 159 390 250 390 257 390 259 390 267 390 479 390 499 390 550 390 551 390 557 390 559 390 657 391 050 391 059 391 060 391 069 391 550 391 559 392 050 392 059 392 060 392 069 393 069 405 020
Page 161 156 162 162 162 162 157 157 158 158 140 140 140 140 140 133 133 133 133 134 134 134 133 123 123 136 136 136 135 135 135 135 184 184 133 133 133 133 134 133 133 134 134 133 133 134 134 134 134 49 66
154 153 153 153 153 153 153 153 153 154 154 154 154 153 153 155 155 155 155
372 019 372 035 372 039 372 110 372 119 372 120 372 129 372 140 372 149 372 150 372 159 372 210 372 219 372 220 372 229 372 240 372 249 372 250 372 259 374 011 374 020
264
Page 215 215 215 215 215 215 215 215 215 215 215 214 214 214 214 214 214 239 239 239 239 216 239 239 239 239 216 239 216 239 239 239 239 239 216 216 216 216 239 239 239 216 216 78 239 216 216 216 216 216 216 216 216 216 216 216 242 242
Part No. 410 404 410 405 410 406 410 407 410 410 410 411 410 413 410 415 410 416 410 420 410 421 410 425 410 426 410 430 410 431 410 450 410 503 410 506 410 510 410 515 410 520 410 525 410 530 410 603 410 605 410 606 410 610 410 615 410 620 410 625 410 630 410 720 410 903 410 905 410 906 410 910 410 915 410 920 410 925 410 930 416 003 416 005 416 006 416 010 416 015 416 016 416 020 416 025 416 030 416 035 416 040 416 050 416 060 416 070 416 080 416 100 416 120 416 140 416 150 416 200
Page 242 242 242 242 242 242 242 242 242 242 242 242 242 242 242 242 241 241 241 241 241 241 241 239 239 245 239 239 239 239 239 245 244 244 244 244 244 244 244 244 240 240 240 240 240 245 240 240 240 240 240 240 240 240 240 240 240 240 240 240
Part No. 416 220 416 280 416 300 416 403 416 410 416 411 416 415 416 416 416 420 416 421 416 425 416 426 416 430 416 431 416 440 416 441 416 450 416 451 416 505 416 516 416 903 416 905 416 906 416 910 416 915 416 920 416 925 416 930 416 970 417 005 417 010 417 015 417 020 417 030 417 050 417 100 417 115 417 120 417 125 417 130 417 150 420 100 420 107 420 120 420 127 420 207 423 010 423 011 423 017 423 019 423 020 423 021 423 027 423 029 425 076 425 089
Page 240 240 240 243 243 243 243 243 243 243 243 243 243 243 243 243 243 243 243 240 244 244 244 244 244 244 244 244 244 241 241 241 241 241 241 241 241 241 241 241 241 218 218 218 218 219
Part No. 435 803 435 805 444 006 444 008 444 009 444 010 450 000 450 001 450 007 450 011 450 101 453 100 454 000 454 100 454 107 455 000 459 000 459 003 459 010 459 019 459 020 459 029 459 030 459 039 459 119 459 127 459 129 459 139 460 147 460 213 460 507 460 517 460 557 463 010 465 801 466 192 466 203 472 021
Page 247 247 246 246 246 246 165 165 165 165 165 168 169 169 169 169 167 167 167 167 167 167 167 167 166 166 166 166 169 168 166 166 166 168 247 247 248 212 212 212 212 212 212 212 212 211 210 210 211 210
Part No. 472 219 472 227 472 229 472 237 472 239 472 269 472 279 472 289 472 299 476 001 476 010 476 016 476 020 476 100 478 011 478 012 478 019 478 027 478 041 478 049 478 051 478 099 478 112 478 129 478 141 478 200 478 410 478 430 478 450 478 530 478 540 478 550 480 003 480 004 480 005 480 006 480 018 480 019 480 020 480 021 480 110 480 113 480 114 480 150 480 157
Page 210 210 210 211 211 211 211 211 211 174 173 173 174 174 180 180 180 182 181 181 181 16 181 185 185 182 185 185 185 186 186 186 175 175 175 175 178 178 178 178 176 176 176 177 177 19 19 19 19 162 229 229 126 131
Part No. 540 001 540 002 540 100 540 103 540 105 540 110 540 200 540 250 540 251 540 260 540 261 540 801 540 803 540 805 540 810 540 821 540 900 540 901 540 910 540 911 540 912 540 930 540 931 545 000 545 001 546 000 546 001 546 002 546 025 549 000 549 001 549 050 549 051 549 090 549 091 552 010 552 030 554 011 556 125 556 130 559 010 559 011
Page 213 213 217 217 30 217 218 209 209 209 209 252 252 252 253 252 213 214 213 213 213 125 125 233 233 220 220 220 220 170 170 171 171 172 172 33 33 228 228 228 228 228 164 164 164 164 164 164 164 164 164 206
219 219 219 219 219 219 219 219 254 254
472 022 472 023 472 024 472 109 472 119 472 129 472 139 472 201 472 207 472 209 472 210 472 217
483 100 483 125 483 150 483 200 528 619 528 850 528 870 538 010 538 030
562 001 562 035 562 050 562 101 562 135 562 150 562 250 562 440 562 460 563 010
265
266
www.dehn.de
Stock No.
Page
Stock No.
Page
Stock No.
Page
5999-12-158-2303 139
6150-12-308-6928 239 6150-12-353-5887 239 6150-12-308-6979 245 6150-12-198-1948 244 6150-12-198-6809 244 6150-12-198-6810 244 6150-12-198-1482 244 6150-12-168-2696 244 6150-12-168-2695 244 6150-12-168-2694 244 244
6150-12-308-6935 243 6150-12-300-9131 243 6150-12-308-6607 240 6150-12-198-6812 244 6150-12-198-6813 244 6150-12-198-6814 244 6150-12-168-9942 244 6150-12-168-2693 244 6150-12-198-6815 244 6150-12-198-6816 244 6150-12-198-1483 244 6150-12-168-2692 244
308 041
5999-12-362-1557 135
410 003 410 005 410 006 410 010 410 015 410 020 410 025 410 030 410 035 410 040 410 050 410 060 410 070 410 099 410 140 410 150 410 199 410 299 410 401 410 403 410 404 410 405 410 406 410 407 410 410 410 411 410 413 410 415 410 416 410 420 410 421 410 425 410 426 410 430 410 431 410 450 410 503 410 506 410 510 410 515 410 520 410 525 410 530 410 606
VG 96927 T011 A044 VG 96927 T011 A045 VG 96927 T011 A046 VG 96927 T011 A047 VG 96927 T011 A048 VG 96927 T011 A049 VG 96927 T011 A050 VG 96927 T011 A051 VG 96927 T011 A052 VG 96927 T011 A053 VG 96927 T011 A054 VG 96927 T011 A055 VG 96927 T011 A056 VG 96927 T011 A057 VG 96927 T011 A058 VG 96927 T011 A059 VG 96927 T011 A060 VG 96927 T011 A061 VG 96927 T011 A092 VG 96927 T011 A093 VG 96927 T011 A094 VG 96927 T011 A085 VG 96927 T011 A096 VG 96927 T011 A086 VG 96927 T011 A087 VG 96927 T011 A097 VG 96927 T011 A084 VG 96927 T011 A098 VG 96927 T011 A088 VG 96927 T011 A099 VG 96927 T011 A089 VG 96927 T011 A100 VG 96927 T011 A090 VG 96927 T011 A101 VG 96927 T011 A091 VG 96927 T011 A095 VG 96927 T011 A116 VG 96927 T011 A117 VG 96927 T011 A118 VG 96927 T011 A119 VG 96927 T011 A120 VG 96927 T011 A121 VG 96927 T011 A122 VG 96927 T011 A126
6150-12-156-9107 239 6150-12-156-8386 239 6150-12-156-9108 239 6150-12-156-8387 239 6150-12-156-9069 239 6150-12-156-9073 239 6150-12-156-9072 239 6150-12-156-9109 239 6150-12-156-9071 239 6150-12-156-9070 239 6150-12-156-6051 239 6150-12-156-9110 239 6150-12-156-9111 239 6150-12-156-9112 239 6150-12-156-6207 239 6150-12-161-4272 239 6150-12-156-9113 239 6150-12-156-9114 239 6150-12-300-9132 242 6150-12-195-9490 242 6150-12-192-5455 242 6150-12-196-6346 242 6150-12-192-5456 242 6150-12-198-7027 242 6150-12-171-2783 242 6150-12-192-5457 242 6150-12-196-7301 242 6150-12-192-5458 242 6150-12-198-1216 242 6150-12-198-1217 242 6150-12-198-1218 242 6150-12-198-6803 242 6150-12-198-6804 242 6150-12-198-6805 242 6150-12-198-6806 242 6150-12-197-0088 242 6150-12-196-7302 241 6150-12-195-9694 241 6150-12-196-7304 241 6150-12-196-7303 241 6150-12-196-7606 241 6150-12-198-6807 241 6150-12-198-6808 241 6150-12-304-4604 245
410 905 410 906 410 910 410 915 410 920 410 925 410 930
416 003 416 005 416 006 416 010 416 015 416 016 416 020 416 025 416 030 416 035 416 040 416 050 416 060 416 070 416 080 416 100 416 120 416 140 416 150 416 200 416 220 416 280 416 300 416 410 416 411 416 415 416 416 416 420 416 421 416 425 416 426 416 430 416 431 416 440 416 441 416 450
VG 96927 T011 A062 VG 96927 T011 A063 VG 96927 T011 A064 VG 96927 T011 A065 VG 96927 T011 A066 VG 96927 T011 A128 VG 96927 T011 A067 VG 96927 T011 A068 VG 96927 T011 A069 VG 96927 T011 A070 VG 96927 T011 A071 VG 96927 T011 A072 VG 96927 T011 A073 VG 96927 T011 A074 VG 96927 T011 A075 VG 96927 T011 A076 VG 96927 T011 A077 VG 96927 T011 A078 VG 96927 T011 A079 VG 96927 T011 A080 VG 96927 T011 A081 VG 96927 T011 A082 VG 96927 T011 A083 VG 96927 T011 A102 VG 96927 T011 A109 VG 96927 T011 A110 VG 96927 T011 A103 VG 96927 T011 A111 VG 96927 T011 A104 VG 96927 T011 A112 VG 96927 T011 A105 VG 96927 T011 A113 VG 96927 T011 A106 VG 96927 T011 A114 VG 96927 T011 A107 VG 96927 T011 A115
6150-12-156-9115 240 6150-12-156-9085 240 6150-12-156-9116 240 6150-12-156-9084 240 6150-12-156-9117 240 6150-12-178-9673 245 6150-12-156-9118 240 6150-12-156-9119 240 6150-12-156-9083 240 6150-12-156-6208 240 6150-12-156-8388 240 6150-12-156-9120 240 6150-12-156-9082 240 6150-12-156-9121 240 6150-12-188-4475 240 6150-12-156-9122 240 6150-12-188-4476 240 6150-12-156-9123 240 6150-12-161-4273 240 6150-12-156-9124 240 6150-12-188-4477 240 6150-12-188-4478 240 6150-12-156-9125 240 6150-12-308-6941 243 6150-12-308-6934 243 6150-12-308-6981 243 6150-12-308-6940 243 6150-12-308-6933 243 6150-12-308-6939 243 6150-12-308-6932 243 6150-12-309-6938 243 6150-12-308-6931 243 6150-12-308-6937 243 6150-12-308-6930 243 6150-12-308-6936 243 6150-12-308-6929 243 646 000 VG 96953 T010 B0001 5975-12-133-4342 249 644 000 VG 96953 T10 A0001 5975-12-120-0006 249 634 145 634 160 VG 96953 T10 D0003 VG 96953 T10 D0004 5975-12-166-0114 248 5975-12-153-8505 248 540 100 540 103 VG 96953 T05 B0002 VG 96953 T05 B0001 5975-12-120-7744 217 217 466 192 466 203 VG 96953 T07 B0001 VG 96953 T10 E0001 5940-12-188-4931 247 4030-12-320-9037 248 465 801 VG 96953 T07 A0001 5940-12-156-8385 247 444 006 444 008 444 009 444 010 VG 96933 T14 A002A VG 96933 T14 B001A VG 96933 T14 B002A VG 96933 T14 A001A 5940-12-156-9126 246 5940-12-156-9128 246 5940-12-156-9127 246 5940-12-152-3867 246 435 803 435 805 VG 96953 T06 B0001 VG 96953 T06 A0001 5999-12-156-2656 247 5999-12-156-9129 247 417 005 417 010 417 015 417 020 417 030 417 050 417 100 417 115 417 120 417 125 417 130 417 150 6150-12-313-5059 241 6150-12-313-5060 241 6150-12-313-5061 241 6150-12-313-5062 241 6150-12-313-5063 241 6150-12-313-5064 241 6150-12-313-5065 241 6150-12-313-5066 241 6150-12-313-5067 241 6150-12-185-8587 241 6150-12-313-5068 241 6150-12-174-2744 241
www.dehn.de
267
Conversion Table
Description
Round Wires St/tZn, 8 mm Round Wires St/tZn, 10 mm Round Wires St/tZn, with plastic coating, 8 mm Round Wires St/tZn, with plastic coating, 10 mm Round Wires Al, medium-hard/soft, 8 mm Round Wires Al, medium-hard/soft, 10 mm Round Wires Al, with plastic coating, medium-hard, 8 mm Round Wires StSt (V2A) / (V4A), 8 mm Round Wires StSt (V2A) / (V4A), 10 mm Round Wires Cu, medium-hard/soft, 8 mm Strips St/tZn, 20x2.5 mm, Z300/500 Strips St/tZn, 30x3.5 mm, Z300/500 Strips St/tZn, 30x4 mm, Z300/500 Strips St/tZn, 40x4 mm, Z300/500 Strips St/tZn, 40x5 mm, Z300/500 Strips StSt (V2A) / (V4A), 30x3.5 mm Strips Cu, 20x2.5 mm
Part No.
800 008 800 010 / 800 310 800 108 800 110 840 008 / 840 018 840 108 / 840 028 840 010 840 118 860 008 / 860 908 860 010 / 860 020 860 910 / 860 920 830 008 / 830 108 830 038 810 225 / 801 225 810 335 / 852 335 801 335 / 825 335 810 304 / 801 304 810 404 / 801 404 810 405 / 801 405 860 335 / 860 325 860 900 / 860 925 831 225
Length (m)
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Weight (kg)
1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
268
www.dehn.de
Abbreviations
The following list shows and explains all abbreviations mentioned in the present catalogue. Material combinations of air-termination systems and down conductors with one another and with structural parts
Steel Aluminium Copper Steel (St/tZn) Aluminium Copper StSt Titanium Tin yes yes no yes yes yes yes yes no yes yes yes no no yes yes no yes StSt yes yes yes yes yes yes Titanium yes yes no yes yes yes Tin yes yes yes yes yes yes
Conductor Types:
Abbreviation
in catalogue
Fl Rd
Materials:
Abbreviation
in catalogue
Symbols:
Material Aluminium Aluminium magnesium silicon wrought alloy Electrical aluminium alloy Aluminium casting with magnesium Stainless steel (Material No. e.g. 1.4016/1.4301/1.4303) Stainless steel (Material No. e.g. 1.4571/1.4401/1.4404) Stainless steel, copper-coated Steel (black) Steel (GEOMET) Steel, hot dip galvanised Steel, galvanised Steel, copper-coated Malleable cast iron Malleable cast iron, hot dip galvanised Zinc die casting Grey cast iron Copper, electrical copper Red castin brass Brasss Brass, copper coated Brass, tin-coated Copper, tin-coated Tin Plastic material / Polyethylene / Polyamide / Polystyrene Polyvinyl chloride Glass-fibre reinforced plastic Polyester (unsaturated) Polyamide Ethylene vinyl acetate copolymer Cross-linked polyethylene Discontinued Products New Products Screws Screw heads
Al AlMgSi E-AlMgSi G-AlMg3 StSt StSt (V4A) StSt / gal Cu St/blank St/Zn St/tZn St/gal Zn St/Cu MCI MCI/tZn ZDC GCI Cu RCB Ms Ms/gal Cu Ms/gal Sn Cu/gal Sn Sn K PVC GRP UP PA EVA XLPE
f Knurled screw
g Countersunk screw r
Raised head screw
Recommended values:
Screw M5 / M6 M8 M10 M12 Tightening torque * 4 Nm * 10 Nm * 20 Nm * 25 Nm
Others:
tested according EN 50164-1
te
s ted
= >
www.dehn.de
269
Legal Notes
Since we do not carry out the design of systems or system components, the suggested application of our products should be regarded as product information and for advisory purposes only. Our oral and written advice on application is based on experience and given to the best of our knowledge. However, it must be also considered as not binding. This particularly applies to the different conditions of use which are beyond our control. We recommend to check whether the respective DEHN product is suitable for the intended application. Application, use and processing of our products take place beyond our control. Therefore, the product is completely subject to the users responsibility.
Trademarks
"BLITZPLANER * "DEHNgrip" * "DEHNfix" * "DEHNQUICK" * "DEHNsnap" * "HVI" "...Mit Sicherheit DEHN." *
* in Germany
270
www.dehn.de
2.2
2.3
2.4
2.5
2.6
3. Prices, Value-Added Tax, Packaging Costs 3.1 Our prices are subject to change without notice. 3.2 Prices include, insofar as nothing else is arranged, customary packaging from our plant without value-added tax. On the day of invoicing, the legally identified VAT amount is to be reimbursed to us. 3.3 The cost of non-customary packaging, e.g., collective or seaworthy packaging, is invoiced separately. The customer bears the cost of the disposal or return of packaging. 4. Passing of Risk, Optional Insurance The risk of accidental loss, destruction, or deterioration passes to the customer upon dispatch to the customer from our plant, even if carriage-paid delivery is agreed upon. At the request and expense of the customer, we will insure the delivery against breakage, damage to goods in transit and fire damage. Payment Due Dates, Discounts, Right of Refusal, Default, Small Order Quantity Surcharge Unless otherwise agreed, invoices are payable net 10 days. Purchaser shall pay the costs of payment. Discount amounts are deductible only if they have been agreed on with us and all accounts payable due have been paid. If purchaser is in default with his payments, interest on the outstanding amount shall be payable at the rate of 8 % above the base interest rate. We reserve the right to prove and allege higher default damages. We reserve the right to cause default by demanding early payment. If we are required to advance performance and, if after the execution of the contract, it becomes apparent that our claim, in particular for payment, may be jeopardised by purchasers inability to perform we may refuse performance. The customer cannot charge counter-claims against our due payment claims or exercise a right of retention, unless the customer is entitled to a claim recognised by declaratory judgement that is not contested by us and if, while exercising the right of retention, the counter-claim from the customer is based on the same contractual relationship. Orders, with the exception of cash sales, for which the net amount (invoiced amount without shipping costs and value-added tax) is less than 75.00, a small order surcharge of 25.00 will be charged.
5. 5.1
5.2
5.3
5.4
www.dehn.de
271
Key Words
Product Page 32 79 90 76 32 24 29 19 24 28 50 32 248 31 228 DEHNcon-H 85 DEHNfix Conductor Holders 121 DEHNgrip Conductor Holders 117 DEHNhold Conductor Holders 119 DEHNiso Combi Sets 54 DEHNiso RoofConductorHolder 52 DEHNiso Spacers 43 DEHNIT Earthing Method 204 DEHNsnap Conductor Holders 118 Disconnecting Clamp Austrian Standard 168 Disconnecting Sleeves 165 Dowels for Rigid Foam Plates 132/229 Downpipe Clamps 218 Drilling Screw 162 Dripping Water Protective Collars 14 Driving Options and Driving Depth of Earth Rods 187 Earth Electrode Wall Bushings 185 Earth Entry Rods 178 Earth Resistance Measuring Equipment in a leather case 232 Earth Rods 188 Earthing Busbars 212/247 Earthing Cable Lugs 246 Earthing Clamps 247 Earthing Conductors with cable lugs 239-245 Earthing Pipe Clamps 213-215 Earthing Pipe with Drilling Spiral 249 Earthing Pipe with Impact Spike 249 Earthing Resistance 230 Earthing Spike 248 Earthing Test Tongs CA 6412 230 Earthing Tongs 220 End Pieces 184 EP4 Continuity Tester 231 Equipotential Busbars 205-208 ES Disconnecting Clamp 168 EXFS 100 / EXFS 100 KU for explosionhazard areas 256 EXFS L / EXFS KU for use in explosionhazard areas 259 Expansion Pieces 159 Expansion Strap for Foundation Earth Electrodes 203 FIX Test Joint 168 Fixed Earthing Terminal M16 182 Fixed Earthing Terminals 180 Flat Strip Holders DEHNhold 129 Flat Strip Holders with cleat flat design 130 Flat Strip Holders with cleat and flange 130 Flat Strip Holders with thrust piece 131/223 Foundation Basket for On-site Concrete Foundation 42 FS Clamps 158 Gutter Board Clamps Gutter Clamps Gutter Clamps in single-screw technique 155 153 154 Product Cupal Sheets Cupal Sleeves Page 164 164 Product Page 196 197 193 195 228 235 61 72 78 196 189 174 255 136 Product Page Air-termination Caps Air-termination Masts for HVI Conductor light on Flat Roofs Air-termination Masts for Sub-roof Installation of HVI Conductors Air-termination Masts with HVI Conductor Air-termination Rod Adapter Air-termination Rod for Ridge and Hip Tiles Air-termination Rod for Trapezoidal Sheet Metal Roofing Air-termination Rods Air-termination Rods D40 Air-termination Rods for Metal Roofs Air-termination Rods GRP/Al Air-termination Stud Anchoring Pole Angled air-termination Spikes Anti-corrosion Tape Hammer Frame Hammer Guiding Riders Hammer Inserts for Earth Rods Hammer Inserts for Tubular Earth Rods Heat-shrinkable Sleeve HVI Lightning Protection at Thatched Roofs HVI Conductor HVI Conductor in Supporting Tube HVI Conductor light Impact Heads Impact Spikes Inspection Doors Isolating Spark Gap for lightning equipotential bonding KS Connectors Roof Conductor Holders for metal roofs 111 Roof Conductor Holders for ridge and hip tiles 103 Roof Conductor Holders with adhesive pad 113 Roof Conductor Holders with angled brace for roof surfaces 108 Roof Conductor Holders with angled flexible brace for roof surfaces 106 Roof Conductor Holders with brace for roof surfaces 107 Roof Conductor Holders with clamping device for roof surfaces 109 Roof Conductor Holders with embossed brace for roof surfaces 104 Roof Conductor Holders with preformed brace for roof surfaces 110 Roof Conductor Holders with tension spring for ridge and hip tiles 101 Round Wires 13 Saddle Clamps 150 Saddle Clamps with enlarged contact surface 152 Self-supporting Air-termination Rods 35-38 Set of Earth Entry Rods 177 Single-screw Terminal Clamps 190 Spacers 203 Spacers for Omnidirectional Antennas 74 Special Coating Paint 228 Spider Wrench 227 Staples 126 Staples for flat strips 131 Straightening Tools 227 Strips 15 Support Plates 23 Supports for Air-termination Rods D40 and DEHNcon-H 26 Supports for VDB Test Badge 176 SV Clamps for aboveground and underground connections 145 Telescopic Lightning Protection Mast in Bucket or Concrete Foundation 40 Telescopic Lightning Protection Mast with Screw Foundation 39 Terminal Brackets 156/191 Terminal Clamp 147/190/224 Terminal Clamps for Steel Girders 148 Terminal Clamps with threaded bolt 185 Terminal Clamps with Thrust Piece 149 Terminal Lugs straightened 16/179 Tripods for Air-termination Rods D40 and Supporting Tubes GRP/Al 25 Tubular Earth Rods 189 UF Test Joint Boxes UNI Disconnecting Clamps UNI Earthing Clamps Universal Connector UP Test Joint Boxes Wedge Connector Wind Load at Isolated Air-termination Systems Wire Straighteners Wood Screws with threaded head 170 166 209 138 173 202 34 225 229
Leather Case with Measuring Accessories for Continuity Tester 231 MAXI MV Clamps MMV Clamps MV Clamps MV Clamps for Air-termination Rods Number Plates Occurrence Counter 135 135 133 157 175 234
Bimetallic Isolating Clamp with Shield 169 Bridging Brackets 160 Bridging Braids 161 Bridging Cable with Saddle Clamps 163 Bridging Cables 162 Bucket Foundations for Telescopic Lightning Protection Masts 41 Cables 17 Clamping Bushes 155 Clamping Frame Variants 136 Components for Buildings with Thatched Roof 236 Concrete Bases 21 Conductor Holder 224 Conductor Holder Cleats 123 Conductor Holder for CUI Conductor 97 Conductor Holder for flush mounting 123 Conductor Holder for HVI Conductor in Ex Areas 92 Conductor Holder for Rafters 89 Conductor Holder with claw 123 Conductor Holder with cleat flat design 120 Conductor Holders for downpipes 124 Conductor Holders for external thermal insulation composite systems 122 Conductor Holders for Overhead Line Roof Poles 254 Conductor Holders with cleat and flange 121 Conductor Holders with cleat and pin 122 Connecting / Disconnecting Clamps 169 Connecting Clamps for Fixed Earthing Terminals and Reinforcement 183 Connecting Clamps for Foundation Earth Electrodes 202 Connecting Clamps for Reinforcements 199 Connecting Set for Safety Rope System 163 Connecting Sleeve for Air-termination Rods 20/140 Connectors 138 Conversion Table 268 Cover Plates and Plastic Bases 120 Cross Units for aboveground and underground connections 142 Cross Units for aboveground connections 141 CUI Conductor 95 272
Parallel Connectors 139 Pipe Clamp for Air-termination Rods 30 Pipe Clamp Lightning Protection with Tines 218 Pipe Clamps for Antennas 217 Pipe Clamps for Explosion Hazard Areas251 Pipe Clamps for Overhead Line Roof Poles 254 Plastic Conductor Holders for downpipes 125 Pressure-water-tight Wall Bushings for White Tank 186 Profiled Earth Rods 198 Protective Cap for Terminal Lugs 16 Protective Spark Gap for Use at Overhead Line Roof Poles 254 Rod Clamps 157 Rod Holder for external thermal insulation composite systems 128 Rod Holder for Gable Roofs 30 Rod Holder with claw 128 Rod Holders DEHNfix 128 Rod Holders DEHNhold 126 Rod Holders with cleat and flange 127 Rod Holders with cleat and pin 127 Roof Bushings 33 Roof Conductor Holder DEHNspann with embossed brace for roof surfaces 106 Roof Conductor Holder with Brace for HVI Conductor light 88 Roof Conductor Holders adjustable to ridge and hip tiles 102 Roof Conductor Holders for corrugated sheet roofing 115 Roof Conductor Holders for flat roofs 99 Roof Conductor Holders for flat roofs with fixing bores 114
www.dehn.de
Surge Protection Lightning Protection / Earthing Safety Equipment DEHN + SHNE GmbH + Co.KG. Hans-Dehn-Str. 1 Postfach 1640 92306 Neumarkt Germany Copyright 2011 DEHN + SHNE DS427/E/0411 Tel. +49 9181 906-0 Fax +49 9181 906-444 www.dehn.de export@dehn.de