Documente Academic
Documente Profesional
Documente Cultură
INSIDE INSIDE
CLLI NILI-cu CAREFREE- SL MS 2+3 Trinity MD-SC3C- MD-SC3C MD-4Ccu CLLI MD-BNC-0E MD-BNC cu MDSC0039 MD-4Ccu MD-4Ccu MD-4Ccu MD-4Ccu
Model (GBH) LITE P&S + Earth TP-pack CU-XV-10A 2A (5V-1A) Model For CCTV Data / +Filter 5A or 10A 12V-1A +12V-1A (CB-xV) (Data 5V)
RRP@ RM 103.00 73.00 73.00 123.00 53.00 43.00 43.00 RRP @RM 43.00 43.00 53.00 43.00 43.00 53.00 43.00
LLSWA Facts & Mutual Understandings: THANK YOU for using CLLI
Limited Lifetime Service Warranty Arrangements (Know Your Benefits & Limitations)
1. When your CLLI (Cal-Lab Lightning Isolator) is being put to correct usage – following the
• Go to a CAL-LAB showroom and ask for an immediate exchange of RECYCLED unit at
Step-by-step installation procedures and not subjected to overloading or abuse, we
RM25.00, or follow ADDRESS LABEL, and send with appropriate payments directly to
undertake to provide two types of warranties: Manufacturing Defect warranty and
CAL-LAB HQ following instructions found in LLSWA. Unit received without correct
Lightning-Damaged service warranty according to conditions found inside LLSWA
payment will not be serviced, sorry!
2. If you do not intend to respect our LLSWA by paying the stated amounts for the stated
• There will be a minimum charge for check-up only (RM5). For Restoration. / Replacement
services, we cannot force you. But please do not send any unit for restoration or
Exchange of lightning-damaged CLLI, please follow terms in LLSWA below. Tampered replacement if you refuse to pay or do not send with correct payment. Manufacturing
units will not be serviced via LLSWA Terms. defects are extremely rare!
< Please read Conditions & Exclusions in Warranty Card & in www.cal-lab.com > 3. A perfectly healthy CLLI can be damaged on the first time the main switch is turned ON,
• All payment-amounts quoted in this arrangement are only valid at CAL-LAB Restoration if all connected equipment add-up to an OVERLOAD or all equipment were left at ON
Centre at HQ: 30 Lrg Kurau 9, Tmn Sg Abong, 84000 Muar, Johor, for RESTORATION position (If you do not follow our Step-by-step installation-instructions!)
only (cost of sending has not been included). 4. A perfectly healthy CLLI can also be damaged by surges (even from far away) anytime
• Immediate exchange-replacement cost for APO & Dealer available on request. immediately after it has been installed! (probably saving your equipment)
• End-users pay: RM25 or RM15 or RM10 respectively for CLLI above RRP @ RM49 or
RM29 or RM19 If the equipment supposedly protected by a CLLI is also damaged,
• If you have a valid & registered PG-Card (with a registration number given by CAL-LAB),
CLLI proceed to claim following the conditions therein.
for sale @ RRP Pay RRP (Cash & Carry without
• If you have a valid Certificate of Insurance (CI), initiate claims following the instructions at
installation)
Pay Cash & Carry price and
the back of the CI.
additional installation charges Important Reminder: Each CLLI is NOT a MAGIC-box! It needs to be correctly connected
CLLI from RM 20.00 ~ RM 80.00 in order to avoid dangers to equipment & user’s life.
correctly installed
Why your equipment can still be damaged even though protected by a CLLI?
IMPORTANT • If there is a direct strike onto the LNB so powerful that high surge is induced into the co-
CLLI damaged CLLI damaged
There will be ax cable that also supplies the power to the LNB or booster, minor damage may occur.
Beyond Repair But Restorable additional charges if • If your equipment contains faulty component or your installation is wrong, CLLI cannot
unit has been help much. Only equipment still in good condition can be saved.
tampered with, and / • Components WEAR & TEAR in the equipment itself (especially at the POWER section)
Send with End-user may or shipment to
RM30.00 Send with can cause a breakdown, at the slightest surge (or no surge!).
go to APO or Authorized
To CAL-LAB HQ RM15.00 • Abnormal power supply conditions, such as BROWNOUTS and severe VOLTAGE
location for immediate
To CAL-LAB SABAH or SARAWAK FLUCTUATIONS cannot be easily detected by a normal CLLI (unless customized).
exchange-replacement
HQ
@RM25 for a recycled
unit. How to buy CAL-LAB products?
• Delivered to your doorstep – Get details in HOW TO BUY or BUY GUIDE in our web
site or in leaflets or call CAL-LAB to confirm payment amount before pay-in online, then
AT CAL-LAB HQ: AT CAL-LAB HQ: fax or email pay-in slip and provide details for goods to be delivered. Notify us if goods not
Check damages 1. Check damages
Refund RM15.00 if can be restored received after 3 working days.
2. Restore unit to original
Exchange with recycled unit @ RM25.00 functions @ RM10.00 • Go to our showroom in PJ or an APO or Biz-Partner near you and buy through them.
Return on the same day by courier 3. Return unit on the same day
by courier service @ RM5.00 How to pay to CAL-LAB?
service @ RM5.00
• Email callab@callab.com.my or call us or visit www.cal-lab.com for details
• By CASH-ON-LINE – Please check with us or follow instructions in our web site.
• By paying through our Business Partner (BP) who has a credit a/c with us. We will ship
CLLI back to customer goods ordered c/o the BP’s address.
(Repeat, if damaged again, for life) < Specifications / Prices / Terms & Conditions subject to change. Refer to www.cal-lab.com >
Where the CLLI has been damaged before but has not been restored by CAL-LAB
Conditions & Exclusions •
where a set of proprietary equipment is available to perform simulation checks to ensure it
< More Details in www.cal-lab.com > would work the next time.
• Where there is a poor connection between connectors, such as the F-connectors
Conditions for CLLI to be effective for Satellite LNB, where the nuts need to be tightened.
CLLI definitely will make equipment & users safer, but if your equipment is by • Where DCJ-cu or data-cable-CLLI is not used at equipment with AC / DC adapter
itself poorly designed, manufactured or handled, CLLI cannot help much! power supply.
The piece of equipment to be protected must first meet the following basic • Where the item, such as INTERNAL MODEM, DISC-DRIVE, LNB or any item internally
requirements for good quality, in itself, before CLLI can effectively protect! interconnected and not possible for a cable-CLLI to be added.
• Where a damage or mal-function of any equipment is NOT accompanied by any
1. Your equipment must be able to withstand Voltage Tolerance up to corresponding sign of damage at the connected CLLI.
three times the normal operating voltage for one second without any • Where a setup is thought to be correctly protected with a CLLI, but is
damage to any part; interconnected by any type of cable, such as COMM cable, AV cable, UTP cable, RF
cable, Telephone cable, etc. to another set-up, powered separately. (For such situations,
2. Spark-over Voltage or Isolation Withstand Voltage between any two
an appropriate Isolator must be added at each cable-end)
ISOLATED circuits, isolated by any means, must be at least 1KV
• Where the CLLI has been tampered with and was not reassembled correctly.
3. The equipment to be protected must be new and has never been
• Any conditions, though not mentioned above, not in accordance with the
exposed to any surge damage before, as partial damage could have recommended use, mount, or treatment of the CLLI or equipment, such as, water or
been caused before! moisture entering an equipment leaving little trace after having caused some damages, or
4. Each equipment must be absolutely correctly interconnected insect in a equipment causing some components to fail.
internally or among themselves so that a single CLLI can provide the • This list is, by no means exclusive.
links to all external connections, such as Power supply, Telephone line,
TV antenna, Satellite LNB cable, etc. Un-protected cables must not be
! too close to protected ones!