Documente Academic
Documente Profesional
Documente Cultură
M/s Ganno on Dunkerley& & Co. Ltd., #6-3-1111/16, Somajiguda circle, adj. lane to Kirtilaljewellary, K NishatBhag, Beg gumpet Hyderabad-500016
D Date : 23/02/2012
Providing and fixing Glass panes of selected glazing quality and thickness as specified below including providing and fixing Nylon / Rubber / PVC lining of approved quality and fixing with Aluminium glazing clips/ Aluminium beadings (Supply cost of Aluminium clips/ Aluminium beadings are measured in items 85a and 85b above for DOORS / WINDOWS/ PARTITIONS etc.,Using 9.5mm to 10.0mm thick Laminated glass
102.00
sqm
4700/sqm
479400.00
87
Supplying and fixing frameless curtain wall with 10mm thk toughened glass for a clear oepning of size as indicated in drawing with DORMA Universal Patch fittings. Wall connecting profile system as per DORMA Universal, consisting of base section, with bore holes (every 300 mm), including clamping parts with screws and gasket strips to be provided to fix glass to the side walls and ceiling as per Manufacturer's specification and direction of Engineer-In-Charge with all lead and lifts.
79.00
sqm
5300/sqm
418700.00
88
Providig and fixing Frameless Suspended Glazing with Spider Fittings. Design, Supply and Installation of frameless glazed faade suspended from the top of the opening provided with finishing/shading as per Architect incorporating glass panes as per approved drawing, clear float tempered / toughened and toughened/laminated fins as stabilizers used at each vertical joint to provide lateral stiffness against wind loading, deflections and other specified loads expected including frame work structural supports wherever necessary and hardware all other accessories in the glazing with all extrusions, fittings, suspension brackets, DORMA spider fittings of "PFF" series, "V" Series with 4,3,2,1 points spiders & FHB / FHAB M12 stainless steel bolts as per design.
168.00
sqm
9700/sqm
1629600.00
The "PFF" Series Spiders shall have a curvilinear design to reduce stress concentration at transition points, Sleek & twisted arm design for higher torsional moment of resistance & better aesthetic features. The spiders shall be fastened to the fin glass with high tensile strength SS 316 Countersunk Allen bolts. The Flat head bolts for facade glass shall be of SS 316 with an outer diameter of 38mm and all necessary accessories. The "V" Series Spiders shall be with open web arm structure for higher section modulus & flexural strength Support Sturcture : The Intermediate Support Structure to be designed, provided as per structural drawing . The structure should be designed to hold the Forces & Reactions due to Wind Load & Self weight of the Complete Spider Glazing System. This structure should be feasible to accomodate the Fin Shoe Bracket & Fin Bracket as indicated in the dwg. The spiders shall be manufactured by investment casting process of grade SS 316 as per EN Norms
All screws, all weather elements such as flashing, coping, approved Dow Corning sealants, etc to make the system completely waterproof. All spider fittings should be designed to support the weight of the glass by direct bearing on the bolts wherein the structure should be designed as per the relevant codes and should be able to withstand the relevant thermal movements. Design calculations for the facade to be furnished for approval by Engineer-In-Charge with all leads and lifts.
89
Supply and fixing of structural glazing including necessary scaffolding using colour anodised aluminium sections of approved colour special Jindal sections 22736 for peripheral frame sections, section 22738 for intermediate verticals and horizontals in semi unitized system to form grids of size as per the architectural and site requirements and securily fixing the basic frame work onto the masonry with adequate and properly designed achorfasterners Fisher/Hilti make nut and bolts, etc. The frame work has to be finished to line and level, for providing single glazing with heat strengthened, soft coat temperable 6 mm thick reflective Saint Gobain of approved colour placed horizontally on to the sub frame Jindal 22740 and packing with suitable aluminium angle section to meet the same glass in line with spacer foam tape Norton and applied with architectural grade silicon construction sealant (UV resistant) of Dow corning 795 with requisite structural bite applied along the perimeter of each glass pane properl dull matt finished 15 MICRON thick including cost of putty , 230mm centres, missible deflecting of not more than 2 .
Cured glass panes along with sub frame may be fixed on to the main frame work with necessary thermal gaskets and adequate fasteners to line and level. Space for thermal expansions between glass modules shall be restricted to 18 mm and 20 mm for single glazing and baker rod placed between glass panes and covered with water proof rubber strips fixed on to the sub frame, the gap between baker rod and rubber strip & joint of curved panels to be provided with weather sealant Dow corning 789. The gaps around the peripheral frame work and the adjacent masonry/RCC shall be applied with Dow corning 795 or equivalent with requisite structural bite with a provision of 10% openable shutter etc., all as per th direction of Engineer-In-Charge.
Structural glazing of sizes as per the Architectural and site requirements of Saint Gobain-heat strengthened, soft coat 6mm thick reflective glazing of approved colour-cool lite STdeep green (ST 408) or equivalent in rectangular, triangular and curved shapes.
753.00
sqm
2200/sqm
1656600.00
90
Supplying and fixing frameless 10mm thk toughened glass door with stailess steel handle for a clear opening of size as indicated in drawing with DORMA Universal Patch fittings. Wall connecting profile system as per DORMA Universal, consisting of base section, with bore holes (every 300 mm), including clamping parts with screws and gasket strips to be provided to fix glass to the side walls and ceiling as per specification, with heavy duty floor springs, side fixed panels and all necessary hardware complete etc., in all floors with all lead and lifts.
8.00
sqm
9100/Sqm
72800.00
Terms &conditions : 1. 2. 3. 4. 5. VAT @14% Is applicable 50% Payment has to be done in advance. 40% payment has to be done after 50% work is finished Balance Payment should be done within 10days after work is finished. Scaffolding is Your scope