Documente Academic
Documente Profesional
Documente Cultură
D-HG 400
CHARACTERISTICS
Ignition of liquid or gaseous fuels in
high-capacity industrial burners
APPLICATION
The Durag High Spark Igniter ignites oil and gas burners of any
capacity, In its standard version, the ignition lance and the control
unit form a compact module.
Depending on the ignition device model, ignition can be triggered
either through a push button or automatically by feeding the
supply voltage.
After fuel ignition, the igniter tip must be retracted from the ame
area as a protection against heat overload. This can be done
manually or automatically, (automatically by way of a Durag
D-VE 500 Pneumatic Retraction Unit. With special burner types
(e.g. torch systems), no retraction is required if after ignition the
ame wanders off so far that the thermal load stays within the
permissible working temperature.
The length of the ignition lance is manufactured to suit the
furnance plants requirements.
DESCRIPTION
155 mm
45
L2
L1
L3
591
22 mm
Ignition Tip
LED to indicate
igntion
108 mm
SW19