Documente Academic
Documente Profesional
Documente Cultură
RFID
Contents
RFID General Page 3 RFID from Kathrein Page 4 Kathrein-RFID Test Center Amerang RFID Applications RFID/Software RFID Antenna Concepts RFID Antenna Overview Page 5 Page 6-7 Page 8-9 Page 10 Page 11
RFID (Radio Frequency Identification) enables non-contact communication with an RFID data carrier. In the process, digital information can either be read from the data carrier or written to it. Kathrein develops and manufactures the required writer/reader units and antenna systems.
RFID General
In general, RFID technology is grouped into three frequency ranges: LF-RFID: HF-RFID: 125 kHz 13.56 MHz
RFID Wide Range Antennas Page 12-13 RFID Mid Range Antennas Page 14-15 RFID Low Range Antennas Page 16-17 RFID Reader Concepts Page 18 RFID Reader System Overview RFID RRU4 Platform Page 19 Page 20
Due to many years of experience in the UHF range, Kathrein is specialized in RFID systems in the UHF range. UHF-RFID: 865-928 MHz
RFID ARU4 Platform Page 21 RFID M-ARU4 Platform Page 22 RFID Cable Page 23-24 RFID Mounting Accessories Page 26-27 Contact Page 28
Readers
RFID
RFID Applications
Industrial Automation
RFID is particularly suitable for use in industrial automation, to control and optimize manufacturing processes. An extension of its use into internal logistics is a further step for successful introduction of RFID systems. This makes very wide demands on an RFID system. A wide variety of antenna systems is available so as to achieve the desired read range at the various reading points. The Kathrein RFID UHF technology allows even typically varied RFID HF applications to be satisfied with only one single medium. There is no longer any need to change the transponder within the production and internal logistics environment. This opens up entirely new possibilities for design and layout of automatic ID processes, which mean the desired ROI is achieved more quickly.
RFID Applications
RFID for AVI
RFID UHF is particularly well suited to the identification of vehicles, as its large range of up to 10 meter allows a multitude of possible applications. Due to Kathreins many years of experience in the field of integrated vehicle antennas, the business has the necessary know-how to make effective use of systems to identify transponders in the vehicle environment. The ARU4 read/write device has been specially developed for this application field. It provides an efficient and cost-effective solution for integration of RFID technology into safety and access systems. The high protection class and the robust design ensure a long working life at extremely low operating costs.
Intra-Logistics
Kathrein offers products and solutions specially designed for efficient delivery of RFID systems in the field of logistics. The very large number of transponders already in use for logistics demand very high-performance evaluation electronics, capable of recording as many as several hundred transponders quickly and reliably. For these requirements there are optimized process profiles available, which allow users to quickly parameterise their entire system. Kathrein portal antennas are the world leaders in this field; they provide uninterrupted coverage of the field in the read range
RFID in logistics
7
7
RFID Applications
RFID Software
Kathrein has now released the new Reader Start v2 software for quick and efficient configuration and parameterization of Kathrein RFID systems. A large number of optimised and tested RFID applications are pre-selected, allowing the RFID system to be customized and optimized very easily for a wide variety of applications. The user is supported in making the correct choice of antennas and antenna configurations, so that the Kathrein RFID system is ideally suited for any task from near field to far field.
RFID Applications
RFID in logistics
9
7
RFID Products
RFID Antennas
RFID antennas are divided into three different categories; the choice of the right antenna will depend on the application. The modular design of the antenna allows creation of OEM versions by changing the color and logo. Kathreins antenna program comprises the following antenna types:
RFID Products
RFID Antenna Overview
Wide Range Antennas: Type number 520 10078 520 10079 520 10086 520 10087 Frequency range 865-870 MHz 902-928 MHz 865-870 MHz 902-928 MHz Beamwidth 70 circular 70 circular 30 circular 30 circular Protection class IP 65 IP 65 IP 65 ruggedized IP 65 ruggedized
Antenna concepts WIRA Wide Range Antennas Far-field applications Versions with 30 or 70 beamwidth Maximum radiated power of 2 W ERP Wide read range up to 10 m Selectivity dependent upon reading distance MIRA Mid Range Antennas Applications in radiating near field or far field Small dimensions Reading range limited by 0.5 W ERP Typ. read range: 20 cm to 2 m Selectivity dependent upon reading distance LORA Low Range Antennas Applications in reactive near field Extremely small dimensions Very low gain Reading distance < 20 cm Extremely high selectivity Not influenced by metal
Mid Range Antennas: Type number 520 10082 520 10083 520 10172 Frequency range 865-870 MHz 902-928 MHz 865-928 MHz Beamwidth 100 circular 100 circular/linear 100 circular Protection class IP 67 IP 67 IP 67
NEW! NEW!
Low Range Antennas: Type number 520 10084 520 10085 520 10092 Frequency range 865-870 MHz 902-928 MHz 865-928 MHz Beamwidth Near field Near field Near field Protection class IP 67 IP 67 IP 67
NEW!
11
7
RFID Products
RFID Wide Range Antenna Overview
Order no. General Data
Frequency range 865-870 MHz Beamwidth 30/70 Antenna gain 11 dBic 1 dB Axial ratio circular Polarization Type N connector (female) Connection IP 65 Protection class 555 x 262 x 59 mm Dimensions
RFID Products
RFID Wide Range Antenna Overview
Order no. General Data
Frequency range 865-870 MHz Beamwidth 69/69 8.5 dBic Antenna gain Axial ratio 1 dB circular Polarization TNC connector (female) Connection IP 65 Protection class 270 x 270 x 45 mm Dimensions
520 10086
520 10078
520 10087
520 10079
Frequency range 902-928 MHz Beamwidth 30/70 Antenna gain 10.5 dBic Axial ratio 1 dB Polarization circular Connection Type N connector (female) Protection class IP 65 Dimensions 555 x 262 x 59 mm
Frequency range 902-928 MHz Beamwidth 69/69 Antenna gain 8.3 dBic Axial ratio 1 dB Polarization circular TNC connector (female) Connection Protection class IP 65 270 x 270 x 45 mm Dimensions
13
7
RFID Products
RFID Mid Range Antenna Overview
Order no. General Data
Frequency range 865-870 MHz Beamwidth 100/100 Typ. 0.2-2 meters Read range Antenna gain 4 dBic Axial ratio 2 dB Polarization circular Connection TNC connector (female) Protection class IP 67 Dimensions 154 x 126 x 36 mm
RFID Products
520 10082
520 10172
NEW!
Frequency range 865-928 MHz Beamwidth 100/100 Read range Typ. 0-1 meter -13 dBic Antenna gain Axial ratio Typ. 2 dB circular Polarization TNC connector (female) Connection IP 67 Protection class 154 x 126 x 36 mm Dimensions
520 10083
NEW!
Frequency range 902-928 MHz Beamwidth 100/100 Read range Typ. 0.2-2 meters Antenna gain 2.5 dBic Axial ratio Typ. 2 dB Polarization circular Connection TNC connector (female) Protection class IP 67 Dimensions 154 x 126 x 36 mm
15
7
RFID Products
RFID Low Range Antenna Overview
Order no. General Data
Frequency range Read range Selectivity EIFF Antenna gain Connection Protection class Dimensions 865-870 MHz Typ. 7 cm @ NF-Tags * Typ. 5 cm @ NF-Tags * > 20 dB < -15 dBi TNC connector (female) IP 67 90 x 63 x 31 mm
RFID Products
RFID Low Range Antenna Overview
Order no. General Data
Frequency range Read range Selectivity Read range Selectivity EIFF Antenna gain Connection Protection class Dimensions
* Near field tags ** Far field tags
520 10084
LORA
520 10092
ULORA
865-928 MHz Typ. 3 cm @ NF-Tags * Typ. 3 cm @ NF-Tags * Typ. 8 cm @ FF-Tags ** Typ. 10 cm @ FF-Tags ** > 15 dB < -30 dBi TNC connector (female) IP 67 90 x 63 x 31 mm
520 10085
LORA
NEW!
902-928 MHz Typ. 7 cm @ NF-Tags * Typ. 5 cm @ NF-Tags * > 20 dB < -15 dBi TNC connector (female) IP 67 90 x 63 x 31 mm
17
7
RFID Products
RFID Reader System Overview
The RRU and ARU Reader Series features a broad range of options and features like the new integrated Linux based Interface module with high-speed ARM 1 GHz Processor. To optimize the performance in dense reader installations, Kathrein integrates a dynamic base band filtering system to eliminate false read results. Thanks to their housing all Readers are suitable for outdoor use. With the new M-ARU RFID Mid Range Sensor, Kathrein introduce a high integrated Reader Unit based on our successful Mid-Range Antenna Design. With a leading read/write performance for professional industrial installations the M-ARU is focused on Intra-Logistic, Forklift and Automation application. The system is based on the approved Kathrein premium RFID Reader Platform and is 100 % compatible to our Kathrein RFID Reader Protocol KBRP.
RFID Products
RFID Reader System Overview
RRU4:
Type number Designation
520 10094 520 10095 520 10097 520 10098 RRU4-ETG-E6 RRU4-ETL-E6 RRU4-ETG-U6 RRU4-ETL-U6
Frequency range
865-870 MHz 865-870 MHz 902-928 MHz 902-928 MHz
Protection class
IP 65 IP 65 IP 65 IP 65
Reader Concepts RRU4 Stationary readers Far field applications Compact construction Flexible antenna configuration Read distance: up to 10 m Max. radiated power 2 W ERP or 4 W EIRP M-ARU ARU4 Antenna-integrated readers Antenna-integrated readers Far field AVI applications Compact construction Integrated circular wide range antenna Up to 3 additional external antennas can be connected Read distance: up to 10 m Max. radiated power 2 W ERP or 4 W EIRP Mid Range applications Small construction Integrated MIRA antenna Read distance: up to 1.5 m Max. radiated power 0.2 W ERP
M-ARU:
Type number Designation
520 10135 M-ARU RS232 EU
NEW!
Frequency range
865-870 MHz
Protection class
IP 65
ARU4:
Type number Designation
520 10100 520 10101 520 10103 520 10104 ARU4-ETG-E6 ARU4-ETL-E6 ARU4-ETG-U6 ARU4-ETL-U6
Frequency range
865-870 MHz 865-870 MHz 902-928 MHz 902-928 MHz
Protection class
IP 65 IP 65 IP 65 IP 65
RRU4
ARU4
M-ARU
19
7
RFID Products
RRU4 Plattform
Frequency range Output power Standards Antenna interface Operating system User platform Interfaces Digital I/O Operating temperature Storage temperature Protection class Dimensions Conforms to ETSI/FCC 33 dBm EPC Global Gen2/ ISO 18000-6C 4-port RX/TX, TNC-reverse Kathrein firmware Linux platform optional Ethernet 4 inputs/4 outputs optional -20 C to +55 C -20 C to +85 C IP 65 252 x 216 x 66 mm CE, FCC, China
RFID Products
ARU4 Platform
Frequency range Output power Standards Antenna interface Antenna integration Operating system User platform Interfaces Digital I/O Indicators Operating temperature Storage temperature Protection class Dimensions Conforms to ETSI/FCC 33 dBm EPC Global Gen2/ ISO 18000-6C 3-port RX/TX, TNC-reverse 69/69 circular Kathrein firmware Linux platform optional Ethernet 4 inputs/4 outputs optional 4 LEDs, freely programmable -20 C to +55 C -20 C to +85 C IP 65 270 x 270 x 80 mm CE, FCC, China
Key Features Intra Logistics Industrial Automation High Speed Applications up to 250 km/h Vehicle Identification Outdoor use Support NXP Ucode I2C & Impinj Monza 4 & Alien Higgs 3
Key Features Intra Logistics Industrial Automation High Speed Applications up to 250 km/h Vehicle Identification Outdoor use Support NXP Ucode I2C & Impinj Monza 4 & Alien Higgs 3
21
7
RFID Products
M-ARU Plattform
Frequency range Output power Standards Antenna integration Operating system Interface Digital I/O Operating temperature Storage temperature Protection class Dimensions Conforms to ETSI 22 dBm EPC Global Gen2/ ISO 18000-6C 100/100 circular Kathrein firmware RS 232 3 inputs/3 outputs -20 C to +55 C -20 C to +85 C IP 65 154 x 126 x 76 mm CE, FCC, UL, CCC
RFID Products
RFID Reader Power Supply
Type number Designation RFID Reader power adapter 115-230 V/24 V
Key Features Fork Lift Application Industrial Automation Storage Systems Outdoor use Support NXP Ucode I2C & Impinj Monza 4 & Alien Higgs 3
23
7
RFID Products
RFID Antenna Cable
In order to meet specific demands, Kathrein support you with a wide range of high quality RFID cables with low insertion losses and high IP 65 protection class in combination with our IP 65 protected antennas and readers.
RFID Products
RFID Cables
Type number Designation
520 10125 Connecting kit RS 485 RRU4-RS4 cable set (cable set including 1 x DC cable M12/open, 1.5 meters in length, 1 x RS interface cable M12/open, 1.5 meters in length, 2 x GPIO cable M12/open, 1.5 meters in length 520 10126 Connecting kit Ethernet 520 10127 Protective cover set for the RRU and ARU reader serie RRU4-ETG/ETL cable set (cable set including 1 x DC cable M12/open, 1.5 meters in length, 1 x Ethernet interface cable M12/RJ45 socket, 1.5 meters in length, 2 x GPIO cables M12/open, 1.5 meters in length) To cover unused M12 sockets or antenna sockets Set including 3 TNC and 2 M12 caps
Type number 520 101 74 520 101 75 520 101 76 520 101 77 520 101 78
Designation R-AC 3 TNC-TNCR R-AC 6 TNC-TNCR R-AC 10 TNC-TNCR R-AC 15 TNC-TNCR R-AA TNC-N (f-m)
Cable type LL240 flex, L = 3 m, IP 65 LL240 flex, L = 6 m, IP 65 LL240 flex, L = 10 m, IP 65 LL240 flex, L = 15 m, IP 65 Adapter TCN-N (f-m)
*Cable TNC-TNCR in combination with the antenna adapter TNC-N Type: 52010178 also fit for antennas: 52010086/52010087
Connecting kit
25
7
RFID Products
RFID Mounting Accessories
Type number
520 10005
RFID Products
RFID Mounting Accessories
Interface
Mast installation
Description
Mast mounting set
Material
Steel
Type number
520 1 0128
Description
Wall mount/mast mounting set
Interface
Wall/mast installation
Material
Steel
Mast mounting set 520 10005 is suitable for the following antennas: 520 10003/520 10004/520 10086/52010087
Mast mounting set 520 10128 is suitable for the following antennas: 520 10078/520 10079/520 10060/520 10073 and all RRU4 and ARU4 readers
Wall mounting
Mast installation
27
7
KATHREIN representatives
You will find an updated list of KATHREIN representatives on our website www.kathrein-rfid.de
Contact: Sales RFID Phone: E-mail: Internet: +49 8075 914 933 0 rfid-sales@kathrein-sachsen.de www.kathrein-RFID.de
99811847/0.5/022012/JH/PF