Documente Academic
Documente Profesional
Documente Cultură
Dedication. Innovation. Performance. These three words sum up our drive to help push our segment of the pool and spa industry to new heights. AquaStar has a history of innovation. Our innovative spirit has driven us to push new ideas and concepts to develop meaningful and useful products, setting a new standard in the industry. In 2013, we are pushing the envelope again by introducing a bold new line of drains and many other specialty products to make life a little easier for designers and pool builders alike. We have streamlined our entire product line to give you a great selection and a multitude of options. As always, on behalf of our incredible team, I want to thank all of our loyal customers for their support. So jump in and take a DIP (dedication, innovation, performance) with AquaStar.
Table of Contents
3 What Makes AquaStar Different 93 Chlorinators
NOTE: For compliance with the ANSI/APSP 16 Standard, AquaStar has determined that all covers and screws need to be replaced every 5 years from date of installation. The facility owner should keep records. Make sure frame/sump is structurally sound and screws have at least 3 threads of engagement, or replacement of the frame/sump is also necessary.
table of contents
VGB-Compliant
AquaStar suction outlets, gravity drains, sumps, frames and retrofit plates are the safest drains available, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (federal mandate).
CPSC-Listed
All AquaStar drain covers and sumps are tested at nationally recognized testing labs (NRTL), exceeding ANSI/APSP 16-2011, NSF 50-2008 and G154 UV standards.
Advanced Materials
AquaStars engineered polymers far exceed the UV and durability standards of other materials. AquaStar has been testing all materials to the G154 UV test standard since 2004, long before it became standard requirement.
Innovative Technology
A disciplined approach to research and development, combined with advanced manufacturing methods enables AquaStar to deliver cuttingedge products to the market faster.
drains
drains
Dual-Port 2" Spigot x 2" Socket Deep PVC Sump (see drain cover options on following pages)
4" Socket Deep PVC Sump (see drain cover options on following pages)
6" Socket Deep PVC Sump (see drain cover options on following pages)
SB
SBAC
8" Standard Sump with Adjustable Collar (see drain cover options on following pages)
SBV
8" Standard sump for vinyl/fiberglass (see drain cover options on following pages)
drains
VGB Series
Features
For single or multiple drain use in gunite, steel, vinyl, fiberglass and tile pools and spas (see installation instructions) Single sumpless Floor/wall: 56 GPM at 3.5 fps Floor/wall: 24.4 GPM at 1.5 fps 5.2 square inch opening Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater #316 stainless steel screws, qty 3 for brass inserts Manufactured from superior UV-resistant engineered polymers All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Easily and safely retrofits many HydroAir/ITT parts Listed with IAMPO R&T See page 7 for six different adapter plates that are sold separately, available for sumpless connections to 1022s, 1.5" female adapters, 1.5" and 2" inside and outside slip and threads 25 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
EQ UI R P R E
No sump required!
/
D
ZE R
O SU
EP
TH / NO
Part # 4HPxxx
4 2 3 1
3/32 typ
3X 1-3/8
1. 4" suction outlet cover 2. 8-32 x 1/2" lg flat head phillips screw, 316 ss, qty 3 3. VGB 2008 color code swimming man
1-1/16
DI
TI O N A L
Code Key:
4 = for 4HPxxx xxx = color (i.e. 101 = white) HP = hockey puck cover 25 = 2" 15 = 1" Soc. = socket, slip 20 = 2" SPG = spigot, slip SI = Slip Insider T = Thread
4" Bulkhead Adapter with 2" Slip-Insider Sumpless Fitting (sold separately)
1-1/8
4" Bulkhead Adapter with 1" Slip-Insider Sumpless Fitting (sold separately)
1-1/8 2 2" slip-inside 1. 4" suction outlet cover 2. #8 x 1/2" lg flat head phillips screw, 316 ss 3. 4" sumpless bulkhead, 2" slip-insider 4. VGB 2008 color code swimming man
1-5/16 4
Part # 420SIxxx
Part # 415SIxxx
1. 4" suction outlet cover 2. #8 x 1/2" lg flat head phillips screw, 316 ss 3. VGB 2008 color code swimming man 4. 4" sumpless bulkhead, 1-1/2" slip-insider
4" Bulkhead Adapter with 2" Threaded x 1" Socket Sumpless Fitting (sold separately)
1-1/8 1-1/8 1-1/2" soc. 1 3 1. 4" suction outlet cover 2. #8 x 3/4" lg flat head phillips screw, 316 ss, qty 3 3. VGB 2008 color code swimming man 4. 4" sumpless bulkhead, 2" MPT x 1-1/2" soc. 2" mpt
4" Bulkhead Adapter with 1" Threaded Sumpless Fitting (sold separately)
1-1/8 2 3 1 1-1/2" mpt 1. 4" suction outlet cover 2. #8 x 3/4" lg flat head phillips screw, 316 ss, qty 3 3. VGB 2008 color code swimming man 4. 4" sumpless bulkhead, 1-1/2" mpt 5/8
Part # 420T15Sxxx
Part # 415Txxx
Use with 1" FPT, does not fit 1022 female adapters
Retrofit 4" Bulkhead Adapter with 1" Threaded Sumpless Fitting (sold separately)
1-1/16 15/32 1-1/2" thread
4 3
Retrofit 4" Bulkhead Adapter with 1" Threaded Sumpless Fitting (sold separately)
1-1/16 1/2 2 3 1 27/32 1-1/2" straight pipe thread 11/32
1. 4" suction outlet cover 2. Retro 4" sumpless bulkhead, 1-1/2" MPT 3. VGB 2008 color code swimming man 4. #8 x 1/2" lg flat head phillips screw, 316 ss, qty 3
1. 4" suction outlet cover 2. 8-32 x 1/2" lg flat head phillips screw, 316 ss 3. VGB 2008 color code swimming man 4. Retro 4" sumpless bulkhead, w/ extended 1-1/2" thread
drains
6" Round Hockey Puck Sumpless Suction Outlet Cover, HydroAir/ITT Replacement
drains
VGB Series
Features
For single or multiple drain use in gunite, steel, vinyl, fiberglass and tile pools and spas (see installation instructions) Single sumpless Floor/wall (2" pipe): 224 GPM at 6.3 fps Floor (1" pipe): 177 GPM at 5.9 fps Wall (1" pipe): 122 GPM at 3.4 fps 11.4 square inch opening Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Listed with IAMPO R&T See page 9 for eight different adapter plates that are sold separately, available for sumpless connections to 1022s, 1.5" female adapters, 1.5" and 2" inside and outside slip and threads as well as existing HydroAir wall fittings #10-6015S and 10-6304S (both with brass inserts) 25 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
EQ UI R P R E
No sump required!
/
D
ZE R
O SU
EP
TH / NO
3 2
2-7/8 1. 6" round suction outlet cover 2. VGB 2008 color code swimming man 3. #8-32 x 1.25" flat head phillips screw, 316 ss, qty 4 1/4
Retrofits to Sta-Rite/Pentair #8011 and AquaStar #4RNDxxx equalizer
DI
TI O N A L
105
108
OPTIONAL COLORS
104
106
SI = Slip Insider T = Thread
107
drains
Code Key:
6" Bulkhead Adapter with 2" Thread and 2" Socket for Fiberglass/ Steel, with Gasket and 2" Locking Nut (sold separately)
2-7/8 3-13/16 1 2-7/8 4x 8-32 threaded inserts
6" Bulkhead Adapter with Extended 1" Threaded Sumpless Fitting (sold separately)
Use with flush mount 1" FPT, does not fit 1022 female adapters
3 1-23/32 1 1-1/2" NPS 5/32 wall 5/16
3 2
2 1
2-13/32
1.187 .010
1. 6" HP bulkhead fitting adapter 2. nut, 2-1/2" straight pipe thread 3. gasket, 2-1/2" thread
Part # 6E15Txxx
1. 6" round suction outlet cover 2. VGB 2008 color code swimming man 3. #8-32 x 1-1/4" flat head phillips screw, 316 ss, qty 4 4. 6" sumpless bulkhead with extended 1-1/2" NPS
6" Bulkhead Adapter with 1" Slip-Insider Sumpless Fitting (sold separately)
6" Bulkhead Adapter with 1" Threaded Sumpless Fitting (sold separately)
Fits 1022 female adapters
3 1-1/2" slip-inside 2 1. 6" round suction outlet cover 2. VGB 2008 color code swimming man 3. #8-32 x 1.25" flat head phillips screw, 316 ss, qty 4 4. 6" sumpless bulkhead with 1-1/2" NPS 1-23/32 3/4 1-1/2" NPS 5/32 wall 5/16
3 2 1-5/16 1
1-9/16
Part # # 615SIxxx
1. 6" round suction outlet cover 2. VGB 2008 color code swimming man 3. #8-32 x 1-1/2" flat head phillips screw, 316 ss, qty 4 4. 6" bulkhead with 1-1/2" slip-inside
1 4
Part # # 615Txxx
6" Bulkhead Adapter with 2" Socket Sumpless Fitting (sold separately)
1-1/2 5 3 1-1/4 .154 min. wall 2" socket 4 1. 6" suction outlet cover, HydroAir replacement 2. 2" socket sumpless fitting 3. VGB 2008 color code swimming man 4. Spacer blocks, 6" round suction outlet, qty 4 5. #8 x 2.5" flat head phillips screw, 316 ss, qty 4 6. 2" socket x 1-1/2" socket pipe reducer 3
6" Bulkhead Adapter with 2" Threaded x 1" Socket Sumpless Fitting (sold separately)
1-9/16 1-1/8 4 2" pipe thread 2 1 1. 6" suction outlet cover 2. VGB 2008 color code swimming man 3. 6" sumpless bulkhead with 2" thread and 1-1/2" soc. 4. #8-32 x 1-1/4" flat head phillips screw, qty 4
1-1/2" socket
Part # RNDxxx
Part # 620T15Sxxx
6" Bulkhead Adapter with 2" Threaded x 2" Socket Sumpless Fitting (sold separately)
1-9/16 4 2 2-1/2" straight pipe thd. 1-31/32
6" Bulkhead Adapter with 2" Slip-Insider Sumpless Fitting (sold separately)
Also available as 1" slip Insider p/n 615SIxxx
3 2 1. 6" round suction outlet cover 2. VGB 2008 color code swimming man 3. #8-32 x 1-14" flat head phillips screw, 316 ss, qty 4 4. 6" sumpless bulkhead with 2" slip-insider 1-9/16 1-5/8 2" slip-insider
1-5/16
2" socket
1 3
Part # 625T20Sxxx
1. 6" round suction outlet cover 2. VGB 2008 color code swimming man 3. 6" sumpless bulkhead with 2-1/2" NPT & 2" socket 4. #8-32 x 1-1/4" flat head phillips screw, 316 ss, qty 4
1 4
Part # 620SIxxx
drains
Super High Flow 8" Anti-Entrapment Suction Outlet Cover, Solid Riser Ring and Mud Frame
drains
VGB Series
Features
For single or multiple drain use (see installation instructions) Single 3" sump depth: Floor: 145 GPM at 2.8 fps Wall: 84 GPM at 1.7 fps Single Sumpless: Floor: 140 GPM at 2.8 fps Wall: 84 GPM at 1.7 fps Floor/wall: 75 GPM at 1.5 fps 16.0 square inch opening Additional sump versions also available #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Meets or exceeds ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing 24 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
EQ UI R P R E
No sump required!
/
D
ZE R
O SU
EP
TH / NO
Part # A8Rxxx
Fits: AquaStar (all standard 8" models), American, Pentair, Color Match, Waterway and most Custom Molded (CMP)
5 9-5/8 4 3 6 2
2 7/8 1
8" Round Solid Riser Ring also sold separately p/n A8RRxxx
1. 2. 3. 4. 5. 6.
8FRxxx frame, 8" round A8RRxxx riser ring, 8" round A8Rxxx super high flow 8" round anti-entrapment cover VGB 2008 color code swimming man 10x075-FPA #10 x 3/4" flat-head phillips type-a screw, 316 ss, qty 4 10x125-FPA #10 x 1-1/4" flat-head phillips type-a screw, 316 ss, qty 2
DI
TI O N A L
3 3-5/8
3 6 2
4 5
2 5-1/2
5 2
1 1. 2. 3. 4. 5. 8" round double deep frame Riser ring, 8" round Super high flow 8" round anti-entrapment cover #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 4 #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 4
2" socket
1. Dual-port 2-1/2" spigot x 2" socket deep PVC sump 2. Riser ring, 8" round 3. Super high flow 8" round anti-entrapment cover 4. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 4 5. 2" NPT port plug 6. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 4
1-15/16
4 3 7
12-19/32
6 5
1 2
1. 8" round double-deep frame 2. 4" socket deep PVC sump 3. Super high flow 8" round anti-entrapment cover 4. 10-32 x 5/8" flat head phillips machine screw, 316 ss, qty 4 5. 6" NPT plug 6. Riser ring, 8" round 7. #10 x 1 1/4" flat head phillips type-a screw, 316 ss, qty 4
1. 8" round double-deep frame 2. Super high flow 8" round anti-entrapment cover 3. 10-32 x 5/8" flat head phillips machine screw, 316 ss, qty 4 4. 6" NPT plug 5. Riser ring, 8" round 6. #10 x 1 1/4" flat head phillips type-a screw, 316 ss, qty 4
7 2 1-1/2" NPT 4 6-25/32 2 2" socket 1 1. 8" sump bucket 8" for drain cover 2. 2" NPT port plug 3. 2" socket x 1-1/2" socket pipe reducer 3 4. Riser ring, 8" round 5. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 4 6. Super high flow 8" round anti-entrapment cover 7. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 2 2" socket 6 5 1-1/2 NPT 8-3/32 2 6
7 5 4
1 1. 8" sump bucket for adjustable collar 2. 2" socket x 1-1/2" socket pipe reducer 2 3. 2" NPT port plug 4. 8" sump bucket adjustable collar 5. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 2 6. Riser ring, 8" round 7. Super high flow 8" round anti-entrapment cover 8. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 4
drains
11
8" Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame
drains
VGB Series
Features
For single or multiple drain use (see installation instructions) Single 3" sump depth: Floor: 88 GPM at 2.0 fps Wall: 70 GPM at 1.6 fps Floor/wall: 66.4 GPM at 1.5 fps 14.2 square inch opening Additional sump and frame versions also available #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Meets or exceeds ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing 24 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Part # 8AVWRxxx
Fits: AquaStar (all standard 8" models), American, Pentair, Color Match, Waterway and most Custom Molded (CMP)
9-5/8 3 2 5 1 7-1/2 1-3/8 4 1. 8" vented riser ring 2. 8" round anti-entrapment suction outlet cover 3. #10 x 3/4" lg., flat head phillips type a, 316 ss, qty 2 4. 8" round anti-entrapment frame 5. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 2
15/16
8" Round Vented Riser Ring also sold separately p/n 8RRxxx
5 4 3 1-3/8" 2 1 1. 8" round double-deep frame 2. 8" vented riser ring 3. #10 x 1-1/2" flat head phillips type-a screw, 316 ss, qty 4 4. 8" anti-entrapment suction outlet cover 5. #10 x 3/4" lg flat head phillips type-a screw, 316 ss, qty 2 12-25/32 2-7/32 1-1/4 2" socket
1-3/8
7 2 6 5 3
4 1
1. Dual-port 2-1/2" spigot x 2" socket deep PVC sump 2. 8" anti-entrapment suction outlet cover 3. 2" tapered pipe thread plug 4. 8" round double-deep frame 5. 8" vented riser ring 6. #10 x 1-1/2" flat head phillips type-a screw, 316 ss, qty 4 7. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 2
1-3/8
6 2 5 4
12-23/32 4 6" socket .280 min. 1-3/8 2 5
12-19/32 2-1/8
1. 4" socket deep PVC sump 2. 8" anti-entrapment suction outlet 3. 8" round double deep frame 4. 8" vented riser 5. #10 x 1-1/2" flat head phillips type-a screw, 316 ss, qty 4 6. #10 x 3/4" lg flat head phillips type-a screw, 316 ss, qty 2 7. 6" NPT plug
7 3
7 3
1. 6" socket deep PVC sump 2. 8" anti-entrapment suction outlet 3. 8" round double-deep frame 4. 8" vented riser 5. #10 x 1-1/2" flat head phillips type-a screw, 316 ss, qty 5 6. #10 x 3/4" lg flat head phillips type-a screw, 316 ss, qty 2 7. 6" NPT plug
2 1 5 3 9-15/32
1-3/8
8 7 6 5 4 3
6-27/32
1-1/2" NPT
2" socket 1. 8" anti-entrapment suction outlet 2. #10 x 3/4" lg flat head phillips type-a screw, 316 ss, qty 2 3. 8" vented riser 4. 8" sump bucket for 8" drain cover 5. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 4 6. 2" socket x 1-1/2" socket pipe reducer 7. 2" NPT port plug 7 1. 8" sump bucket for adjustable 2. 2" socket x 1-1/2" socket pipe reducer 3. 2" NPT port plug 4. 8" sump bucket adjustable collar 5. 8" vented riser ring 6. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 2 7. 8" anti-entrapment suction outlet 8. #10 x 3/4" lg flat head phillips type-a screw, 316 ss, qty 2
drains
13
8" Low-Profile Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame
drains
VGB Series
Features
For single or multiple drain use (see installation instructions) Single 3" sump depth: Floor: 100 GPM at 2.0 fps Wall: 70 GPM at 1.7 fps Floor/wall: 61.2 GPM at 1.5 fps 13.1 square inch opening Additional sump versions also available #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Meets or exceeds ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing 24 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Part # LP8AVWRxxx
7-1/2
Fits: AquaStar (all standard 8" models), American, Pentair, Color Match, Waterway and most Custom Molded (CMP)
9-5/8 2
1 5 4 1
15/16
8" Round Vented Riser Ring also sold separately p/n 8RRxxx
1. 8" vented riser ring 2. 8" low profile anti-vortex cover 3. #10 x 3/4" flat head phillips screw, 316 ss, qty 2 4. 8" round anti-entrapment frame 5. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 2
5 4 3 2 12-25/32
7 6 3
1 4
1. 8" round double deep frame 2. 8" vented riser ring 3. #10 x 1-1/2" flat head phillips type-a screw, 316 ss, qty 4 4. 8" low profile anti-entrapment suction outlet 5. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 2
1. 8" round double deep frame 2. 8" vented riser ring 3. #10 x 1-1/2" flat head phillips type-a screw, 316 ss, qty 4 4. Dual-port 2-1/2" spigot x 2" socket deep PVC sump 5. 2-2" tapered pipe thread plug 6. 8" low profile anti-entrapment suction outlet 7. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 2
6 1 5 3 2 7 1 .280 min. 4
12-19/32 7 2-1/8 .237 min. 4" socket 4 1. 8" round double-deep frame 2. 8" vented riser ring 3. #10 x 1-1/2" flat head phillips type-a screw, 316 ss, qty 4 4. 4" socket deep PVC sump 5. 8" low profile anti-entrapment suction outlet 6. #10 x 3/4" flat head phillips screw, 316 ss, qty 2 7. 6" NPT plug
1. 8" round double-deep frame 2. 8" vented riser ring 3. #10 x 1-1/2" flat head phillips type-a screw, 316 ss, qty 4 4. 6" socket deep PVC sump 5. 8" low profile anti-entrapment suction outlet 6. #10 x 3/4" flat head phillips screw, 316 ss, qty 2 7. 6" NPT plug
5
1
2" socket 7 1. 8" sump bucket for 8" drain cover 2. 8" vented riser ring 3. #10 x 1-1/4" flat head phillips 1 type-a screw, 316 ss, qty 2 4. 8" low profile anti-entrapment suction outlet 5. #10 x 3/4" lg flat head phillips 6 screw, 316 ss, qty 2 6. 2" socket x 1-1/2" socket pipe reducer 7. 2" NPT plug
1 1. 8" sump bucket for adjustable collar 2. 2" socket x 1-1/2" socket pipe reducer 3. 2" NPT port plug 4. 8" sump bucket for adjustable collar 2 5. 8" vented riser ring 6. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 2 7. 8" low profile anti-entrapment suction outlet 8. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 2
drains
15
VGB Series
Features
For single or multiple drain use (see installation instructions) Single 3" sump depth Floor: 110 GPM @ 2.2 fps Wall: 106 GPM @ 2.1 fps Floor/wall: 70.6 GPM at 1.5 fps 15.1 square inch opening Additional sump versions also available #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Meets or exceeds ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing 36 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Part # 8FUWxxx
STANDARD COLORS 101 102 103 105 108
Fits: AquaStar (all standard 8" models), American, Pentair, Color Match, Waterway and most Custom Molded (CMP) at least two mud frame screws must be used to secure cover
8-1/16" 7-9/16"
3
2-3/16"
1-1/4"
1. 8" round drain frame 2. 8" suction outlet cover 3. 10 x 3/4" flat head phillips type-a screw, 316 ss, qty 4
drains
2" socket
1. 8" round double deep frame 2. 8" suction outlet cover 3. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 4
1. 8" round double deep frame 2. Dual-port 2-1/2" spigot x 2" socket deep PVC sump 3. 2" tapered pipe thread plug 4. 8" suction outlet cover 5. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 4
1. 8" round double-deep frame 2 2. 4" socket deep PVC sump 3. Riser ring, 8" round 4. 8" suction outlet cover 5. #10 x 3/4" flat head phillips screw, 316 ss, qty 4 6. 6" NPT plug
2 1. 8" round double-deep frame 2. 6" socket deep PVC sump 3. 6" NPT plug 4. Riser ring, 8" round 5. 8" suction outlet cover 6. #10 x 3/4" flat head phillips screw, 316 ss, qty 4
4
6-29/32
6-25/32
1-1/2" NPT
2" socket
2" socket
7 9 8-1/4 2
2 1. 8" sump bucket for 8" drain cover 2. 2" socket x 1-1/2" socket pipe reducer 3. 2" NPT port plug 4. 8" suction outlet cover 5. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 2
1. 8" sump bucket for vinyl gasket 2. 2" socket x 1-1/2" socket pipe reducer 3. 2" NPT port plug 4. 8" sump bucket vinyl gasket 5. 8" sump bucket ring with overmolded gasket 6. #10-32 x 1" pan head phillips screw, 316 ss, qty 8 7. 8" suction outlet cover 8. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 2
1. 8" sump bucket for 8" drain cover 2. 2" socket x 1-1/2" socket pipe reducer 3. 2" NPT port plug 4. 8" suction outlet cover 5. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 2
drains
17
8" Hockey Puck Sumpless Suction Outlet Cover and Mud Frame
drains
VGB Series
Features
For single or multiple drain use in concrete or tile pools and spas (see installation instructions) Single sumpless Floor/wall: 224 GPM at 6.3 fps Floor/wall: 74.3 GPM at 1.5 fps 15.8 square inch opening Additional sump versions also available #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Easily and safely retrofits most brands existing 8" frames and sumps that R8HPxxx does not fit* Patent-pending technology Meets or exceeds ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater 32 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
EQ UI R P R E
No sump required!
/
D
ZE R
O SU
EP
TH / NO
Part # 8HPxxx
STANDARD COLORS 101 102 103 105 108
7
*Fits: AquaStar (all standard 8" models), American, Pentair, Color Match, Waterway and most Custom Molded (CMP) at least two mud frame screws must be used to secure cover
2 1
7-1/2 6 4
5 2-7/8
1-5/8 15/16
1. 6" round suction outlet cover 2. VGB 2008 color code swimming man 3. #8-32 x 1.25" flat head phillips screw, 316 ss, qty 4 4. 8" round adapter plate 5. 8" round frame 6. #10 x 3/4" flat head phillips screw, 316 ss, qty 2
DI
TI O N A L
drains
1. 8" round double deep frame 2. 8" round adapter plate 3. 6" round suction outlet cover 4. #8-32 x 1-1/4" flat head phillips screw, 316 ss, qty 4 5. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 2
1. 8" round double deep frame 5 2. 8" round adapter plate 3. 6" round suction outlet cover 4. #8-32 x 1-1/4" flat head phillips screw, 316 ss, qty 4 5. dual-port 2-1/2" spigot x 2" socket deep PVC sump 6. 2-plug 2" tapered pipe thread plug 7. 1#10 x 3/4" flat head phillips type-a screw, 316 ss, qty 2
1. 8" round adapter plate 2. 6" round suction outlet cover 3. #8-32 x 1.25" flat head phillips screw, 316 ss, qty 4 4. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 2 5. 8" sump bucket for 8" drain cover 6. 2" soc. x 1-1/2" socket pipe reducer 7. 2" NPT port plug
1. 8" sump bucket for vinyl gasket 2. 2" socket x 1-1/2" socket pipe reducer 2 3. 2" NPT port plug 4. 8" sump bucket vinyl gasket 5. 8" sump bucket ring w/ overmolded gasket 6. #10-32 x 1" pan head phillips screw, 316 ss, qty 8 7. 8" round adapter plate 8. #10 x 3/4" flat head phillips screw, 316 ss, qty 2 9. 6" round suction outlet cover 10. #8-32 x 1-1/4" flat head phillips screw, 316 ss, qty 4
2 4 1 6 7
3-1/2
2 9-23/32 5 8
1-1/2" NPT
1. 8" round adapter plate 2. 6" round suction outlet cover 3. #8-32 x 1-1/4" flat head phillips screw, 316 ss 4 4. #10 x 3/4" flat head phillips type-a screw, 316 ss 2 5. 2" socket x 1-1/2" socket pipe reducer 6. 2" NPT port plug 7. 8" sump bucket adjustable collar 8. 8" sump bucket for adjustable collar
drains
19
8" Retrofit Hockey Puck Sumpless Suction Outlet Cover with Screw and Bushing Kit
drains
VGB Series
Features
For single or multiple drain use in existing frames and sumps (see installation instructions) Single sumpless Floor/wall: 224 GPM at 6.3 fps Floor/wall: 74.3 GPM at 1.5 fps 15.8 square inch opening Three sets of different stainless steel screws Manufactured from superior UV-resistant engineered polymers Easily and safely retrofits most brands existing 8" frames and sumps that the 8HPxxx does not fit Patent-pending technology Meets or exceeds ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater 32 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
EQ UI R P R E
No sump required!
/
D
ZE R
O SU
EP
TH / NO
Part # R8HPxxx
STANDARD COLORS 101 102 103
7-13/32 6
Fits: AquaStar R 8" models, Alloy Brass Foundry (ABF), Afras, Splash, Sta-Rite, Swimquip, Caretaker/Polaris, Advanced (APP), Hayward and certain Custom Molded (CMP) at least two mud frame screws must be used to secure cover
105 108
7-11/16
2 1
4 6 7 5 2-7/8
6-27/32
1. 6" round suction outlet cover 2. VGB 2008 color code swimming man 3. #8-32 x 1-1/4" flat head phillips screw, 316 ss, qty 4 4. 8" round retrofit adapter plate 5. 8" round universal ring adapters, qty 2 6. #10 x 3/4" flat head phillips screw, 316 ss, qty 2 7. #10-24 x 1/2" flat head phillips screw, 316 ss, qty 2
DI
TI O N A L
10" Round Star Sumpless Suction Outlet Cover, Universal Adapter Kit and Mud Frame
drains
VGB Series
Features
(see installation instructions) Single sumpless: Floor: 170 GPM at 1.7 fps Wall: 170 GPM at 1.7 fps Floor/wall: 147.3 GPM at 1.5 fps 31.5 square inch opening For retrofit or new construction! Available with mud frame for new construction or with universal adapter frame to retrofit all existing frames/sumpsup to 10" round Trademarked VGB compliance button easily identifies VGB 2008 compliance from pool/ spa deck Manufactured from superior UV-resistant engineered polymer Can be used with Brass Anchor Kit p/n BIK4 for odd-sized or non-structured frames/sump All components (cover, adapter plate, frame, screws) meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure #316 stainless steel screws 6 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
EQ UI R P R E
No sump required!
/
D
ZE R
O SU
Retrofits over all sumps/frames up to 10" using included plastic concrete anchors
EP
TH / NO
A
Part # A10RCFRxxx
3 2
11-3/16" 5/16" largest opening
5 4
16 10 13 12
15
11 14
1 9 8
1-15/16"
7 6
9. 1/4" concrete anchor, qty 3 10. 10-32 x 5/16" lg. pan head phillips, 316 ss, qty 2 11. #10 x 1" lg. pan head phillips, 316 ss, qty 3 12. 8-32 x 3/4" lg. pan head phillips, 316 ss, qty 2 13. 10-24 x 7/8" lg. pan head phillips, 316 ss, qty 2 14. #10 x 3/4" pan head phillips, 316 ss, qty 2 15. #8 x 1" lg. pan head phillips, 316 ss, qty 2 16. #8 x 3/4" lg. pan head phillips, 316 ss, qty 2
Also available as a Contractors 2-Pack without Retrofit Kit, with Mud Frame p/n A10RCFR2xxx Vinyl Retrofit Kit p/n 10RCVKxxx
5/8" 1. 10" universal adapter frame 2. 10" round suction outlet drain 3. 10-32 x 5/8" lg. flat head phillips, 316 ss, qty 4 4. Adjustable slide, long, qty 2 5. Adjustable slide, short, qty 2 6. 8" super low profile round frame 7. 3/8" bushing, qty 6 8. 1/4" bushing, qty 2
DI
TI O N A L
drains
21
10" Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame
drains
VGB Series
Features
For single or multiple drain use (see installation instructions) Single 3" sump depth: Floor: 206 GPM at 4.1 fps Wall: 96 GPM at 1.9 fps Floor/wall: 76.2 GPM at 1.5 fps 16.3 square inch opening Additional sump versions also available #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Meets or exceeds ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing 8 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Part # 10AVWRxxx
Fits: AquaStar (all standard 10" models), Waterway and Color Match
12
3 2 5
10 1 15/16 1-5/16
10" Round Vented Riser Ring also sold separately p/n 10RRxxx
1. 10" vented riser ring 2. 10" anti-entrapment suction outlet cover 3. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 2 4. 10" round frame 5. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 2
10-1/16
6 3 7 5
1-9/32
1-9/32 3-15/32 1
3-15/32
1
12-3/4 2" NPT 1. Dual-port 2-1/2" spigot x 2" socket deep PVC sump 2. 10" anti-entrapment round sump frame 3. 10" anti-entrapment suction outlet cover 4. 2" tapered pipe thread plug 5. 10" vented riser ring 6. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 2 7. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 2
1. 10" round double-deep frame 2. 10" vented riser ring 3. 10" anti-entrapment suction outlet cover 4. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 2 5. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 2
2-7/32
10-1/16
5 3 7 4
10-1/16
5 2 7 4
1-9/32 3-15/32
1 1. 6" socket deep PVC sump 2. 10" anti-entrapment suction outlet cover 3. 10" anti-entrapment round sump frame 4. 10" vented riser ring 5. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 2 6. 6" NPT plug 7. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 2
1 12-9/16 1. 4" socket deep PVC sump 2. 10" anti-entrapment round sump frame 3. 10" anti-entrapment suction outlet cover 4. 10" vented riser ring 5. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 2 6. 6" NPT plug 7. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 2
12-23/32
2-1/8
10" Anti-Entrapment Suction Outlet Cover, Solid Riser Ring and Mud Frame
drains
VGB Series
Features
For single or multiple drain use (see installation instructions) Single 3" sump depth: Floor: 166 GPM at 4.8 fps Wall: 96 GPM at 2.8 fps Floor/wall: 53 GPM at 1.5 fps 11.2 square inch opening Additional sump versions also available #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Meets or exceeds ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing 8 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Part # 10AVRxxx
STANDARD COLORS 101 102 103 105 108
Fits: AquaStar (all standard 10" models), Waterway and Color Match
10-1/4 3
11-1/8
4 2 1
1-3/8 7/8 1. 2. 3. 4. 10" round frame Riser ring for 10" cover 10" anti-entrapment suction outlet cover #10 x 1-1/4" flat-head phillips type-a screw, 316 ss, qty 2 5. #10 x 3/4" flat-head phillips type-a screw, 316 ss, qty 2
10" Round Solid Riser Ring also sold separately p/n 10AVRRxxx
drains
9-1/2 10-7/32 5 4 11-3/16 5/16 max 1-5/16 3-15/32 1 2-7/32 3 2 3-15/32 12-3/4 2" NPT 1-5/16 9-1/2
7 6 5 4 3 1 2
10-7/32
1. 2. 3. 4. 5.
10" round double deep frame Riser ring for 10" cover #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 4 10" anti-entrapment suction outlet cover #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 2
1. 10" anti-entrapment round sump frame 2. Dual-port 2-1/2" spigot x 2" socket deep PVC sump 3. 2" tapered pipe thread plug 4. Riser ring for 10" cover 5. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 4 6. 10" anti-entrapment suction outlet cover 7. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 2
5 11-3/16 9-1/2 4 3 5/16 max 6 9-31/32 1-5/16 1-5/16 3-19/32 1 12-3/4 1. 2. 3. 4. 5. 6. 4" socket deep PVC sump Riser ring for 10" cover #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 4 10" anti-entrapment suction outlet cover #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 2 6" NPT plug 1. 6" socket deep PVC sump 2. Riser ring for 10" cover 3. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 4 4. 10" anti-entrapment suction outlet cover 5. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 2 6. 6" NPT plug 3-19/32 1 2 9-1/2 5/16 max 3 2 9-31/32 6 11-3/16 5 4
12-5/8
drains
25
10" Round Debris Catcher Anti-Entrapment Suction Outlet Cover and Mud Frame
drains
VGB Series
Features
For single or multiple drain use (see installation instructions) Single 3" sump depth Floor only with Sun Lid: 60 GPM at 0.7 fps Floor only without Sun Lid: 125 GPM at 1.4 fps Additional sump versions also available 29.4 square inch opening #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Meets or exceeds ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing 6 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Part # 10LTxxx
STANDARD COLORS 101 102 103 105 108
10-5/8 4
2-9/16
1-9/16
1/2 1. 10" round drain frame 1 2. 10" leaf trapper base 3. 10" leaf trapper drain 4. 10" leaf trapper cover 5. 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 2
drains
5 4 5 10-13/16 4 6 1/2 1-9/16 3 3-7/16 14-5/16 2 2" NPT 7 1/2 1. 2. 3. 4. 5. 6. 10" round double-deep frame 10" leaf trapper base 10" leaf trapper drain 10" leaf trapper cover (optional) 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4, (optional) 10 x 1-1/4" pan-head phillips screw, 316 ss, qty 4 1 2" socket 2-1/2" spigot 2-1/4 1-1/4 .231 min 1. 2. 3. 4. 5. 6. 7. 8. 10" round double-deep frame 10" leaf trapper base 10" leaf trapper drain 10" leaf trapper cover (optional) 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4, (optional) 10 x 1-1/4" pan-head phillips screw, 316 ss, qty 4 Dual-port 2-1/2" spigot x 2" socket deep PVC sump 2" NPT plug 1 10-13/16 6 3 2 8
1-9/16
3-7/16
5 4 10-13/16 6 3 2 1/2 3-7/16 14-1/8 1 3-7/16 7 2-1/8 .251 min 4" socket 1. 10" round double-deep frame 2. 10" leaf trapper base 3. 10" leaf trapper drain 4. 10" leaf trapper cover (optional) 5. 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4, (optional) 6. 10 x 1-1/4" pan-head phillips screw, 316 ss, qty 4 7. Dual-port 2-1/2" spigot x 2" socket deep PVC sump 8. 6" NPT plug 1-9/16 8 1/2 1-9/16 1 8 10-13/16
5 4 6 3 2
14-9/32
7 1. 10" round double-deep frame 2. 10" leaf trapper base 3. 10" leaf trapper drain 4. 10" leaf trapper cover (optional) 5. 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4, (optional) 6. 10 x 1-1/4" pan-head phillips screw, 316 ss, qty 4 7. Dual-port 2-1/2" spigot x 2" socket deep PVC sump 8. 6" NPT plug
3-1/8
6" socket
drains
27
9" Square Star Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame
drains
VGB Series
Features
For single or multiple drain use (see installation instructions) Single 3" sump depth Floor/wall: 270 GPM at 2.1 fps Floor/wall: 196.4 GPM at 1.5 fps 42.0 square inch opening Additional sump versions also available Easily and safely retrofits to 9" square " deep frames #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers All components (cover, frame, screws) meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure 6 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
NEW
Part #P9xxx
Fits: AquaStar (all standard 9" square), Pentair (#1 selling) with " deep existing frames and four screw hole pattern
8-7/8
11-1/16
8-7/8 11-1/16 2
2-7/8
9" Square Vented Riser Ring also sold separately p/n 9RRxxx
1. 9" square drain frame 2. 9" vented riser ring 3. 9" suction outlet cover 4. 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4
drains
2 5-7/8
4 3
2 5-7/8
3 2
15-1/8
2" NPT
2-9/32 1-1/4 2" spigot .231 min 2" socket
6 1
1. 9" square double deep frame 2. 9" vented riser ring 3. 9" suction outlet cover 4. 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4
5 1. 9" square double deep frame 2. 9" vented riser ring 3. 9" suction outlet cover 4. 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4 5. Dual-port 2-1/2" spigot x 2" socket deep PVC sump 6. 2" NPT plug
5-7/8
4 3 2 6 5-7/8
4 3 2
6 1
1 5
1. 9" square double deep frame 2. 9" vented riser ring 3. 9" suction outlet cover 4. 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4 5. 4" socket deep PVC sump 6. 6" NPT plug
5 1. 9" square double deep frame 2. 9" vented riser ring 3. 9" suction outlet cover 4. 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4 5. 6" socket deep PVC sump 6. 6" NPT plug
drains
29
9" Square Wave Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame
drains
VGB Series
Features
For single or multiple drain use (see installation instructions) Single 3" sump depth: Floor/wall: 224 GPM at 1.5 fps 48.4 square inch opening Easily and safely retrofits most brands existing 9" square " deep frames* Additional sump versions also available Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers All components (cover, sump, screws) meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure 8 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Part # WAV9WRxxx
11-1/16
*Fits: AquaStar (all standard 9" square), Pentair (#1 selling) with " deep existing frames and four screw hole pattern
4 2 11-1/16
1 1-7/8 1
15/16 9" Square Vented Riser Ring also sold separately p/n 9RRxxx
3 1. 9" vented riser ring 2. 9" square wave suction outlet cover 3. 9" square drain frame 4. #10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4
drains
4 3
29/32
1-7/8 2
29/32
1-7/8
13-3/16 2-7/32
8-5/16
1. 9" square double deep frame 2. 9" vented riser ring 3. 9" square wave suction outlet cover 4. #10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4
1. Dual-port 2-1/2" spigot x 3 2" socket deep PVC sump 2. 9" square wave suction outlet cover 3. 9" square double deep frame 4. 9" vented riser ring 1 5. 2" NPT port plug 6. #10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4
29/32 1-7/8 3 2
29/32
1-7/8 3 2
13
13-1/8
1. 4" socket deep PVC sump 2. 9" vented riser ring 3. 9" square wave suction outlet cover 4. 6" NPT plug 5. 10 x 1-3/4" lg flat head phillips screw, 316 ss, qty 4
1 1. 6" socket deep PVC sump 2. 9" vented riser ring 3. 9" square wave suction outlet cover 4. 6" NPT plug 5. 10 x 1-3/4" lg flat head phillips screw, 316 ss, qty 4
drains
31
9" Square Retro-Adapter Frame and Mud Frame with 14" Square Anti-Entrapment Suction Outlet Cover
drains
VGB Series
Features
For single or multiple drain use
(see installation instructions) Single Floor: 560 GPM at 2.1 fps Wall: 300 GPM at 1.2 fps Floor/wall: 394 GPM at 1.5 fps 84 square inch opening Retrofit adapter frame easily and safely retrofits most brands existing 9" mud frame with epoxy or screws or both; cover anchors into in-molded brass inserts in frame with four fine thread machine screws Ideal for retrofitting over all existing sumps/ frames up to 13 by anchoring directly into pool finish (plaster, tile, fiberglass, etc.) using four brass anchors and stainless screws in kit #BIK4 Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers All components (cover, sump, screws) meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure 4 per case Requires a minimum 3" sump depth
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Mud frame
Optional extra screw holes for anchoring directly into pool finish using four brass anchor kit part # BIK4
Part # 914xxx
13-9/16 12-7/16 8-1/4 6-29/32 4 .218 1
8-3/8 10-17/32
1. 14" x14" to 9" x 9" square anti-entrapment cover 2. 14" x 14" to 9" x 9" square adapter 3. 9" square drain frame 4. 10-32 x 1" pan head phillips screw, ss, qty 4 5. #10 flat head phillips screw, qty 4 6. 10-24 x 1-1/4" flat head phillips screw, ss, qty 4
drains
29/32 3-27/32
29/32
1. 9" square double deep frame 2. 14" square anti-entrapment cover 3. 9" square to 14" square adapter 4. 10-32 x 1" pan head phillips screw, 316 ss, qty 4 5. #10 x 3/4" flat head phillips screw, 316 ss, qty 4
1. Dual-port 2-1/2" spigot x 2" socket deep PVC sump 2. 14" square anti-entrapment cover 3. 9" square to 14" square adapter 4. 2" tapered pipe thread plug 5. #10 x 3/4" flat head phillips screw, 316 ss, qty 4 6. 10-32 x 1" pan head phillips screw, 316 ss, qty 4
1-15/16
1-15/16
4 2
5 6 .280 min.
3 6
1. 4" socket deep PVC sump 2. 14" square anti-entrapment cover 3. 9" square to 14" square adapter 4. 10-32 x 1" pan head phillips screw, 316 ss, qty 4 5. #10 x 3/4" flat head phillips screw, 316 ss, qty 4 6. 6" NPT plug
1. 6" socket deep PVC sump 2. 14" square anti-entrapment cover 3. 9" square to 14" square adapter 4. 10-32 x 1" pan head phillips screw, 316 ss, qty 4 5. #10 x 3/4" flat head phillips screw, 316 ss, qty 4 6. 6" NPT plug
drains
33
12" Square Star Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame
drains
VGB Series
Features
For single or multiple drain use (see installation instructions) Single 3" sump depth Floor/wall: 360 GPM at 1.5 fps 79.9 square inch opening Additional sump versions also available Easily and safely retrofits to 12" square " deep frames #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers All components (cover, frame, screws) meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure 6 per case
The AquaStar line of suction outlet covers, compliant with the new Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
NEW
Part #P12xxx
Fits: AquaStar (all standard 12" square), Pentair (#1 selling) with " deep existing frames and four screw hole pattern
2-7/8"
1"
12" Square Vented Riser Ring also sold separately p/n 12RRxxx
1. 12" drain frame 2. 12" vented riser ring 3. 12" suction outlet cover 4. 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4
drains
4 3 2 6 1 5
1. 12" square double-deep frame 2. 12" vented riser ring 3. 12" suction outlet cover 4. 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4
1. 12" square double-deep frame 2. 12" vented riser ring 3. 12" suction outlet cover 4. 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4 5. Dual-port 2-1/2" spigot x 2" socket deep PVC sump 6. 2" NPT plug
1 5
15-5/16 2-1/8
1. 12" square double-deep frame 2. 12" vented riser ring 3. 12" suction outlet cover 4. 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4 5. 4" spigot deep PVC sump 6. 6" NPT plug
1. 12" square double-deep frame 2. 12" vented riser ring 3. 12" suction outlet cover 4. 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4 5. 6" socket deep PVC sump 6. 6" NPT plug
drains
35
12" Square Wave Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame
drains
VGB Series
Features
For single or multiple drain use (see installation instructions) Single 3" sump depth: Floor/wall: 361 GPM at 1.3 fps 90.8 square inch opening Easily and safely retrofits most brands existing 12" square " deep frames* Additional sump versions also available Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers All components (cover, sump, screws) meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure 8 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Part # WAV12WRxxx
*Fits: AquaStar (all standard 12" square), Pentair (#1 selling) with " deep existing frames and four screw hole pattern
4 2 14 1
3 14 15/16 12" Square Vented Riser Ring also sold separately p/n 12RRxxx 2 1 1. 12" vented riser ring 2. 12" square wave suction outlet 3. 12" square drain frame 4. #10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4
drains
29/32 4-1/4
1-31/32
1 13-9/16 2" NPT 2-7/32 1-1/4 .154 min. 2-1/2" spigot 2" socket 1. Dual-port 2-1/2" spigot x 2" socket deep PVC sump 2. 12" square double deep frame 3. 12" vented riser ring 4. 12" square wave suction outlet 5. 2" NPT port plug 6. #10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4
1. 12" square double-deep frame 2. 12" vented riser ring 3. 12" square wave suction outlet 4. #10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4
11-15/16 11-1/4 4
11-15/16 11-1/4 4 5
11-15/16
11-1/4
3 6
11-15/16 11-1/4
1-31/32
1 1. 4" socket deep PVC sump 2. 12" square double-deep frame 3. 12" vented riser ring 4. 12" square wave suction outlet 5. #10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4 6. 6" NPT plug 13-1/2
1 1. 6" socket deep PVC sump 2. 12" square double-deep frame 3. 12" vented riser ring 4. 12" square wave suction outlet 5. #10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 4 6. 6" NPT plug
drains
37
12" Square Retro-Adapter Frame and Mud Frame with 16" Square Anti-Entrapment Suction Outlet Cover
drains
VGB Series
Features
(see installation instructions) Single Floor: 460 GPM at 1.46 fps Wall: 445 GPM at 1.4 fps Floor/wall: 474 GPM at 1.5 fps 101 square inch opening Frame easily and safely retrofits most brands existing 12" frame with epoxy or screws or both; cover anchors into in-molded brass inserts in frame with four fine thread machine screws Ideal for retrofitting over all existing sumps/ frames up to 15 by anchoring directly into pool finish (plaster, tile, fiberglass, etc.) using four brass anchors and stainless screws in kit #BIK4 Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers All components (cover, sump, screws) meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure 4 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Mud frame
Optional extra screw holes for anchoring directly into pool finish using four brass anchor kit part # BIK4
Part # 1216xxx
16-11/32 15-3/16 11 7/32 9-21/32 5 2 16-11/32 15-3/16 11 9-21/32 3 4 1
1-3/4 13-17/32
2-21/32
1. 16" x 16" anti-entrapment suction outlet cover 2. 12" to 16" square conversion frame 3. 12"x12" square drain frame 4. 10-32 x 1" pan head phillips machine screw, 316 ss, qty 4 5. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 4 6. 10-24 x 1-1/4" flat head phillips screw, 316 ss, qty 4
drains
16-11/32 11
4 3
16-11/32 11
5 3
16-11/32 11
6 5/16 max
1. 12" square double-deep frame 2. 12" to 16" AQ conversion frame 3. 16" x 16" drain cover 4. 10-32 x 1" pan head phillips screw, 316 ss, qty 4 5. 10 x 3/4" flat head phillips screw, 316 ss, qty 4
13-9/16 1-1/4 2-7/32 2-1/2" spigot .154 min. 2" socket 2" NPT
1. Dual-port 2-1/2" spigot x 2" socket deep PVC sump 2. 2" NPT port plug 3. 16" x 16" drain cover 4. 12" to 16" AQ conversion frame 5. 10-32 x 1" pan head phillips screw, 316 ss, qty 4 6. 10 x 3/4" flat head phillips screw, 316 ss, qty 4
16-11/32 11
4 2
16-11/32 11
4 2
29/32 4-1/4
1-7/8
29/32 1 4-1/4
1-7/8
13-3/8 2-1/8
1. 4" socket deep PVC sump 2. 16" x 16" drain cover 3. 12" to 16" AQ conversion frame 4. 10-32 x 1" pan head phillips screw, 316 ss, qty 4 5. 10 x 3/4" flat head phillips screw, 316 ss, qty 4 6. 6" NPT plug
1. 6" socket deep PVC sump 2. 16" x 16" drain cover 3. 12" to 16" AQ conversion frame 4. 10-32 x 1" pan head phillips screw, 316 ss, qty 4 5. 10 x 3/4" flat head phillips screw, 316 ss, qty 4 6. 6" NPT plug
drains
39
18" Square Mud Frame with Four 9" Square Star Suction Outlet Covers and Vented Riser Rings
drains
VGB Series
Features
Single 6" sump depth Floor/wall: 740 GPM at 1.5 fps 160.8 square inch opening #316 stainless steel screws VGB compliance button easily identifies VGB 2008 compliance from pool/spa deck Manufactured from superior UV-resistant engineered polymers Easily and safely retrofits to 18" square " deep frames All components (cover, frame, screws) meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure 4 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
NEW
Part # P18xxx
Grates fit: AquaStar (p/n 18xxx, pre-VGB flat); Pentair (#1 selling) with " deep existing window grid frame and 4x4 screw hole pattern
20-1/4"
2 20-1/4"
18" Square Vented Riser Ring also sold separately p/n 18RRxxx Also available with four grates only for retrofits p/n P18NFxxx
3-7/8"
2" 1"
1. 18" drain frame 2. Vented riser ring for 18" frame 3. 9" suction outlet cover 4. 10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 16
18" Square Frame with Four 9"Square Wave AntiEntrapment Suction Outlet Covers and Vented Riser Rings
drains
VGB Series
Features
For single or multiple drain use (see installation instructions) Requires a minimum 6" sump depth Single Floor/wall: 628 GPM at 1.1 fps 176.8 square inch opening Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers See installation instructions for details and special requirements All components (covers, frame, screws) meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure 4 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Part # WAV18WRxxx
20-5/16
Grates fit: AquaStar (p/n 18xxx, pre-VGB flat); Pentair (#1 selling) with "deep existing window grid frame and 4x4 screw hole pattern
3 2 1
20-5/16
18" Square Vented Riser Ring also sold separately p/n 18RRxxx Also available with four grates only for retrofits p/n WAV18WRNFxxx
1-15/16
1-7/8 1. 18" square (4) 9"x9" frame, plastic 2. 18" vented riser ring 3. 9" x 9" wave square drain cover 4. #10 x 1-3/4" flat head phillips type-a screw, 316 ss, qty 16
drains
41
18" Square Mud Frame with Four 9" Square SUN/8HPH Suction Outlet Covers
drains
VGB Series
Features
Single 6" sump depth Floor: 1000 GPM at 3.1 fps Wall: 644 GPM at 2.0 fps Floor/wall: 490 GPM at 1.5 fps 104.4 square inch opening #316 stainless steel screws VGB compliance button easily identifies VGB 2008 compliance from pool/spa deck Manufactured from superior UV-resistant engineered polymers Easily and safely retrofits most brands existing frames All components (cover, adapter plate, frame, screws) meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Mud frame included for new construction 4 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
SUN Series
Part # SUN18HPHxxx
1
7 4
19-25/32
2 6 18-19/32 19-25/32
18" Square Vented Riser Ring also sold separately part # 18RRxxx Also available with four grates only for 1" deep retrofits p/n RSUN18HPHRxxx Also available with four grates only for " deep retrofits p/n RSUN18HPHxxx
18-19/32
1. #8-32 x 1.25" flat head phillips screw, 316 ss, qty 16 2. #10 x 3/4" flat head phillips screw, 316 ss, qty 24 3. 18" (4) 9"x9" square frame 4. 6" round suction outlet cover, qty 4 5. 8" round frame, qty 4 6. 9" shallow square sun to 8" round adapter, qty 4 7. VGB 2008 color code swimming man, qty 4
1-5/8
3/4 1-15/16
24" Square Mud Frame with Four 12" Square Star Anti-Entrapment Suction Outlet Covers
drains
VGB Series
Features
Single 12" sump depth Floor/wall: 1428 GPM at 1.5 fps 299.7 square inch opening #316 stainless steel screws VGB compliance button easily identifies VGB 2008 compliance from pool/spa deck Manufactured from superior UV-resistant engineered polymers All components (cover, frame, screws) meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure 1 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
NEW
Part # P24xxx
25-7/8 3-1/4
Also available with four grates only for " deep retrofits p/n P24NFxxx
1. 24" drain frame 2. 12" suction outlet cover 3. 10 x 5/8" flat head phillips type-a screw, 316 ss
drains
43
24" Square Frame with Four 12" Square Wave Anti-Entrapment Suction Outlet Covers
drains
VGB Series
Features
For single or multiple drain use (see installation instructions) Requires a minimum 12" sump depth Single Floor/wall: 1444 GPM at 1.3 fps 340.8 square inch opening Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers See installation instructions for details and special requirements All components (covers, frame, screws) meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure 1 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Part # WAV24xxx
25-29/32 11-29/32
11-29/32
25-29/32
5/16
Also available with four grates only for " deep retrofits p/n WAV24NFxxx
3-1/4
1-15/32
1. 24" plastic frame 2. 12" x 12" square wave drain, qty 4 3. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 16
24" Square Frame with Four 12"Square Flat Grate Anti-Entrapment Suction Outlet Covers
drains
VGB Series
Features
For single or multiple drain use (see installation instructions) Requires a minimum 12" sump depth Single Floor/wall: 1531 GPM at 1.4 fps 352 square inch opening Trademarked VGB compliance button easily identifies VGB 2008 compliant cover from on deck and underwater #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers See installation instructions for details and special requirements Installs flat level with finish All components (covers, frame, screws) meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure 1 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Part # 24xxx
STANDARD COLORS 101 102 103
11-29/32 2
105 108
25-29/32 11-29/32 3
25-29/32 11/32
Also available with four grates only for " deep retrofits p/n 24NFxxx
3/4 2-7/32
1. 24" plastic frame 2. 12" x 12" flat square drain cover, qty 4 3. #10 x 3/4" lg flat head phillips screw, 316 ss, qty 16
drains
45
VGB Series
Features
All AquaStar 32" channel drains are now available with either PVC or ABS three-port manufactured sumps Integrated patent-pending Waterstop around edge of entire sump reduces leaks Super strong PVC material sump does not require transitional glue
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
NEW
Pool Finish
Gunite
Part # 32CDPxxx
Pipe
32-29/32
5-1/2
10
10
32" Channel Drain Flat Grate Anti-Entrapment Suction Outlet Cover and PVC Three-Port Manufactured Sump
32" Channel Drain Anti-Entrapment Suction Outlet Cover and PVC Three-Port Manufactured Sump
Part # 32CDFLPxxx
Part # 32CDAVPxxx
5 2 5 4 3 1
32-19/32
5/16 3-27/32
5/16 4-11/32
5 2 3 4 1
4-11/32 10 10
10
10
1. 32" three-port manufactured sump bucket 2. 32" channel drain, cover, flat 3. 2" NPT plug, qty 2 4. 32" channel drain, plaster shield 5. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 16
1. 32" three-port manufactured sump bucket 2. 32" anti-entrapment suction outlet cover 3. 32" channel drain, plaster shield 4. 2" NPT plug, qty 2 5. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 16
32" Channel Drain Debris Catcher Suction Outlet with PVC Three-Port Manufactured Sump
32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover and PVC Three-Port Manufactured Sump
Part # 32CDLTPxxx
32-19/32 3-27/32
Part # 32CDPHPxxx
2 3 32-19/32 4 5 3 1 5/16 4-11/32
1/2
23/32 4-11/32 10 10
2 7 5 4 1
3-27/32
1. 32" three-port manufactured sump bucket 2. 32" leaf trap insert 3. 32" leaf trap cover 4. 2" NPT plug, qty 2 5. 32" channel drain, plaster shield 6. #10 x 3/4" pan head phillips hi-lo screw, 316 ss, qty 8 7. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 8
10
10
1. 32" 3 port manufactured sump 2. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 16 3. 32" channel drain, plaster shield 4. 2" NPT plug, qty 2 5. 32" channel drain anti-entrapment suction outlet pinhole cover
drains
47
VGB Series
Features
For single or multiple drain use (see installation instructions) Retrofits over any existing sump up to 10" round No need for a secondary drain or SVRS, unblockable drain and sump assembly Single Floor: 196 GPM at 2.3 fps Wall: 88 GPM at 1.0 fps Floor/wall: 131 at 1.5 fps 27.9 square inch opening Manufactured from superior UV-resistant engineered polymers All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Individually boxed 6 per master case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
NEW
Part # 32PDxxx
Note: Propeller Sump must be permanently affixed to pool floor using epoxy and provided anchors to be considered unblockable
10-3/4
1-3/8 35
1. 32" propeller sump 2. 32" channel drain anti-entrapment suction outlet pinhole cover 3. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 8 4. #10 x 1" pan head phillips screw, 316 ss, qty 10 (2 optional) 5.1/4" concrete anchor, qty 8
32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover and ABS Three-Port Manufactured Sump
drains
VGB Series
Features
Single 3" sump depth Floor: 268 GPM at 3.1 fps Wall: 172 GPM at 2.0 fps Floor/wall: 131 at 1.5 fps 27.9 square inch opening #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Three ports: bottom 2" OD, 2" ID S/S; inside 2" threaded FPT; two 2" threaded plugs included All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Orange disposable plastic pre-gunite/ plaster insert keeps debris out and retains sump shape during construction Must use transitional glue when attaching to PVC pipe Now available with PVC sump see page 47 for details 4 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
NEW
The Unblockable!
5 4 3 1 5/16 4-11/32
3-27/32
10
10
1. 32" 3 port manufactured sump 2. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 16 3. 32" channel drain, plaster shield 4. 2" NPT plug, qty 2 5. 32" channel drain anti-entrapment suction outlet pinhole cover
drains
49
32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover with Mud Frame
drains
VGB Series
Features
Requires a minimum 3" sump depth the entire length of cover For single or multiple drain use (see installation instructions for plumbing, hydrostatic valve/drain pipe and single or multi-pump connections) Single 3" sump depth Floor: 268 GPM at 3.1 fps Wall: 172 GPM at 2.0 fps Floor/wall: 131 at 1.5 fps 27.9 square inch opening #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Includes disposable dogbone supports to retain shape during all phases of construction 12 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
NEW
The Unblockable!
Also available cover only without sump/frame p/n 32CDPHNFxxx 40 per case
1-1/4 1. 32" channel drain, no sump, frame 2. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 16 3. 32" channel drain, frame support dog bones, qty 4 4. 32" channel drain anti-entrapment suction outlet pinhole cover
32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover and ABS Three-Port Manufactured Sump for Vinyl/Fiberglass
drains
VGB Series
Features
For single or multiple drain use (see installation instructions for plumbing, hydrostatic valve/drain pipe and single or multi-pump connections) Single 3" sump depth Floor: 268 GPM at 3.1 fps Wall: 172 GPM at 2.0 fps Floor/wall: 131 at 1.5 fps 27.9 square inch opening #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Three ports: bottom 2" OD, 2" ID S/S; inside 2" threaded FPT; two 2" threaded plugs included Permanently attached gasket reduces gasket alignment problems All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Must use transitional glue when attaching to PVC pipe 4 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
NEW
The Unblockable!
105 108
33-7/8
1
5-1/8
7 3 6 4 2
1. 32" channel drain anti-entrapment suction outlet pinhole cover 2. 32" three-port manufactured vinyl/fiberglass sump bucket 3. 32" channel drain vinyl clamping gasket 4. 2" NPT plug 5. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 8 6. 32" channel drain vinyl clamping ring with gasket 7. #10 x 1" flat head phillips type-a screw, 316 ss, qty 30
51
32" Channel Drain Flat Grate Anti-Entrapment Suction Outlet Cover and ABS Three-Port Manufactured Sump
drains
VGB Series
Features
For single or multiple drain use (see installation instructions for plumbing, hydrostatic valve/drain pipe and single or multi-pump connections) Single Floor: 316 GPM at 3.9 fps Wall: 208 GPM at 2.6 fps Floor/wall: 122 GPM at 1.5 fps 25.9 square inch opening #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Three ports: bottom 2" OD, 2" ID S/S; inside 2" threaded FPT; two 2" threaded plugs included All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Orange disposable plastic pre-gunite/ plaster insert keeps debris out and retains sump shape during construction Must use transitional glue when attaching to PVC pipe Now available with PVC sump see page 47 for details 4 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
The Unblockable!
4-11/32 10 10
1. 32" three-port manufactured sump bucket 2. 32" channel drain, cover, flat 3. 2" NPT plug, qty 2 4. 32" channel drain, plaster shield 5. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 16
32" Channel Drain Flat Grate Anti-Entrapment Suction Outlet Cover and Frame
drains
VGB Series
Features
Requires a minimum 3" sump depth the entire length of cover For single or multiple drain use (see installation instructions for plumbing, hydrostatic valve/drain pipe and single or multi-pump connections) Single 3" sump depth Floor: 316 GPM at 3.9 fps Wall: 208 GPM at 2.6 fps Floor/wall: 122 GPM at 1.5 fps 25.9 square inch opening Manufactured from superior UV-resistant engineered polymers All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Includes disposable dogbone supports to retain shape during all phases of construction 12 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
The Unblockable!
4-1/16
1-1/4 3/8
Also available cover only without sump/frame p/n 32CDFLNFxxx 40 per case
1. 32" channel drain, no sump, frame 2. 32" channel drain, cover, flat 3. 32" channel drain, frame support dog bones, qty 4 4. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 16
drains
53
32" Channel Drain Flat Grate Suction Outlet Cover and ABS Three-Port Manufactured Sump for Vinyl/Fiberglass
drains
VGB Series
Features
For single or multiple drain use (see installation instructions for plumbing, hydrostatic valve/drain pipe and single or multi-pump connections) Single Floor: 316 GPM at 3.9 fps Wall: 208 GPM at 2.6 fps Floor/wall: 122 GPM at 1.5 fps 25.9 square inch opening #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Three ports: bottom 2" OD, 2" ID S/S; inside 2" threaded FPT; two 2" threaded plugs included Permanently attached gasket reduces gasket alignment problems All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Must use transitional glue when attaching to PVC pipe Now available with PVC sump see page 47 for details 4 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
The Unblockable!
10
10
1. 32" three-port manufactured vinyl/fiberglass sump bucket 2. 32" channel drain vinyl clamping gasket 3. 32" channel drain vinyl clamping ring with gasket 4. 32" channel drain, cover, flat 5. 2" NPT plug, qty 2 6. #10 x 1" flat head phillips type-a screw, 316 ss, qty 30 7. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 8
32" Channel Drain Anti-Entrapment Suction Outlet Cover and ABS Three-Port Manufactured Sump
drains
VGB Series
Features
For single or multiple drain use (see installation instructions for plumbing, hydrostatic valve/drain pipe and single or multi-pump connections) Single Floor: 236 GPM at 3.4 fps Wall: 136 GPM at 1.9 fps Floor/wall: 106 GPM at 1.5 fps 22.6 square inch opening #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Three ports: bottom 2" OD, 2" ID S/S; inside 2" threaded FPT; two 2" threaded plugs included All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Orange disposable plastic pre-gunite/ plaster insert keeps debris out and retains sump shape during construction Must use transitional glue when attaching to PVC pipe Now available with PVC sump see page 47 for details 4 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
The Unblockable!
105 108
32-19/32
1. 32" three-port manufactured sump bucket 2. 32" anti-entrapment suction outlet cover 3. 32" channel drain, plaster shield 4. 2" NPT plug, qty 2 5. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 16
drains
55
VGB Series
Features
Requires a minimum 3" sump depth the entire length of cover For single or multiple drain use (see installation instructions for plumbing, hydrostatic valve/drain pipe and single or multi-pump connections) Single 3" sump depth Floor: 236 GPM at 3.4 fps Wall: 136 GPM at 1.9 fps Floor/wall: 106 GPM at 1.5 fps 22.6 square inch opening #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Includes disposable dogbone supports to retain shape during all phases of construction 12 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
The Unblockable!
105 108
32-13/16
5/16 4-1/16
1-1/4
4 2 3 1
Also available cover only without sump/frame p/n 32CDAVNFxxx 40 per case
1. 32" channel drain, no sump, frame 2. 32" anti-entrapment suction outlet cover 3. 32" channel drain, frame support dog bones, qty 4 4. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 16
32" Channel Drain Anti-Entrapment Suction Outlet Cover and ABS Three-Port Manufactured Sump for Vinyl/Fiberglass
drains
VGB Series
Features
For single or multiple drain use (see installation instructions for plumbing, hydrostatic valve/drain pipe and single or multi-pump connections) Single Floor: 236 GPM at 3.4 fps Wall: 136 GPM at 1.9 fps Floor/wall: 106 GPM at 1.5 fps 22.6 square inch opening #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Three ports: bottom 2" OD, 2" ID S/S; inside 2" threaded FPT; two 2" threaded plugs included Permanently attached gasket reduces gasket alignment problems All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Must use transitional glue when attaching to PVC pipe 4 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
The Unblockable!
105 108
33-27/32
10
10
1. 32" three-port manufactured vinyl/fiberglass sump bucket 2. 32" channel drain vinyl clamping gasket 3. 32" channel drain vinyl clamping ring with gasket 4. 32" anti-entrapment suction outlet cover 5. 2" NPT plug, qty 2 6. #10 x 1" flat head phillips type-a screw, 316 ss, qty 30 7. #10 x 1-1/4" flat head phillips type-a screw, 316 ss, qty 8
drains
57
32" Channel Drain Debris Catcher Suction Outlet with ABS Three-Port Manufactured Sump
drains
VGB Series
Features
Uniquely engineered concave/convex design allows for superior debris catching while exceeding U.L. articulate probe finger and knuckle ASME A112 2008 tests For single or multiple drain use (see installation instructions for plumbing, hydrostatic valve/drain pipe and single or multi-pump connections) Single Floor: 196 GPM at 1.3 fps Wall: 192 GPM at 1.2 fps Floor/wall: 236 GPM at 1.5 fps 50.1 square inch opening #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Three ports: bottom 2" OD, 2" ID S/S; inside 2" threaded FPT; two 2" threaded plugs included All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Orange disposable plastic pre-gunite/ plaster insert keeps debris out and retains sump shape during construction Must use transitional glue when attaching to PVC pipe Now available with PVC sump see page 47 for details 4 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Debris catcher
32-19/32
23/32 4-11/32 10 10
2 7 5 4 1
1. 32" three-port manufactured sump bucket 2. 32" leaf trap insert 3. 32" leaf trap cover 4. 2" NPT plug, qty 2 5. 32" channel drain, plaster shield 6. #10 x 3/4" pan head phillips hi-lo screw, 316 ss, qty 8 7. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 8
VGB Series
Features
Requires a minimum 3" sump depth the entire length of the cover Uniquely engineered concave/convex design allows for superior debris catching while exceeding U.L. articulate probe finger and knuckle ASME A112 2008 tests For single or multiple drain use (see installation instructions) Single 3" sump depth Floor: 196 GPM at 1.3 fps Wall: 192 GPM at 1.2 fps Floor/wall: 236 GPM at 1.5 fps 50.1 square inch opening #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Includes disposable dogbone supports to retain shape during all phases of construction 4 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Debris catcher
105 108
32-13/16
3 2 5 4 1
1/2
23/32 1-31/32
1. 32" channel drain, no sump, frame 2. 32" leaf trap insert 3. 32" leaf trap cover 4. 32" channel drain, frame support dog bones, qty 4 5. #10 x 3/4" flat head phillips type-a screw, 316 ss, qty 8 6. #10 x 3/4" pan head phillips hi-lo screw, 316 ss, qty 8
drains
59
32" Channel Drain Debris Catcher Suction Outlet with ABS Three-Port Manufactured Sump for Vinyl/Fiberglass
drains
VGB Series
Features
Uniquely engineered concave/convex design allows for superior debris catching while exceeding U.L. articulate probe finger and knuckle ASME A112 2008 tests For single or multiple drain use (see installation instructions for plumbing, hydrostatic valve/drain pipe and single or multi-pump connections) Single Floor: 196 GPM at 1.3 fps Wall: 192 GPM at 1.2 fps Floor/wall: 236 GPM at 1.5 fps 50.1 square inch opening #316 stainless steel screws Manufactured from superior UV-resistant engineered polymers Three ports: bottom 2" OD, 2" ID S/S; inside 2" threaded FPT; two 2" threaded plugs included Permanently attached gasket reduces gasket alignment problems All components meet or exceed ANSI/ APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure Must use transitional glue when attaching to PVC pipe 4 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
Debris catcher
105 108
33-27/32
1/8
1-7/32 5-3/4
3 2 6
10
10
1. 32" three-port manufactured vinyl/fiberglass sump bucket 2. 32" channel drain vinyl clamping gasket 3. 32" channel drain vinyl clamping ring with gasket 4. 32" leaf trap insert 5. 32" leaf trap cover 6. 2" NPT plug, qty 2 7. #10 x 1" flat head phillips type-a screw, 316 ss, qty 30 8. #10 x 3/4" pan head phillips hi-lo screw, 316 ss, qty 8
20" Full Circle Suction Outlet Cover and One-Port Manufactured Sump
drains
VGB Series
Features
For single or multiple drain use (see installation instructions) Single floor only: Min. 2" pipe 158 GPM at 1.2 fps 42 square inch opening #316 stainless steel screws Disposable plaster shield included to prevent debris from entering sump and to retain shape during pool finish Waterstop around edges prevent water leaks Unique circle design is filled with plaster/pebble to blend into pool finish Manufactured from superior UV-resistant PVC One port: bottom 2" spigot x 2" socket x 2" NPT All components meet or exceed ANSI/APSP 16-2011 and NSF 50-2008 national standards and ASTM G154 UV testing exposure 1 per case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
NEW
Unblockable!
Top view of completed Full Circle drain Cross-section of completed Full Circle drain
Water Stop Pebble or Plaster
Part # FCxxx
Gunite
Pipe
3 4
5 1
21-3/16 18-3/32 3-5/8 2-3/8 2-1/2 spigot x 2" socket x 2" NPT
1. 20" full circle sump drain 2. 20" drain 3. 20" full circle cap 4. #10-32 x 3/4 flat head phillips screw, 316 ss, qty 10 5. Plaster shield
drains
61
Brass Inserts with Stainless Steel Screws for Suction Outlet Retrofits
drains
VGB Series
Features
Custom brass cement anchors, qty 4, and stainless steel #316 pan head machine screws, qty 4 Mount, drill and epoxy directly into pool finish using a 5/16" masonry drill bit and two-part wet/dry epoxy Install with accompanying stainless steel #316 pan head machine screws No need to use existing frame Perfect for odd-sized sumps or non-structural frames/sumps Use with four outside holes on part # 914xxx for all sumps/frames up to 13" Use with four outside holes on part # 1216xxx for all sumps/frames up to 15" Use with three outside frame holes on part # A10RCFRxxx for all sumps/frames up to 10" Set of 4, 1 set/case
The AquaStar line of suction outlet covers, compliant with the Virginia Graeme-Baker Pool and Spa Safety Act (ANSI/APSP 16-2011 and NSF 50-2008)
To retrofit all existing sumps/frames up to 15", anchor directly into the pool finish using the extra holes on 1216xxx, 914xxx or A10RCFRxxx
1-5/8 5/8 2
10-32 thread
1. 10-32 brass anchor, qty 4 2. 10-32 x 5/8" pan head phillips screw, 316 ss, qty 4
drains
fittings
drains
63
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
Large Extended 2" Return Fitting with Gasket/Nut for Vinyl, Fiberglass or Steel Features
Fits 2" thread or 1" slip 1" thread in front face Extended wall fitting allows for variations in fiberglass depths Includes gasket and locking nut for vinyl, fiberglass or steel installations Includes removable eyeball and nut Manufactured from UV-resistant ABS material 25 per case
2-31/32 2" straight pipe thread 1-15/32 7/8 1 1/2" straight pipe thread 1/2 17/32 2-5/16 1-7/8 3-3/8
R1/16 min.
Part # 1020Fxxx
1. Body, fiberglass wall fitting 2. Eye ball, fiberglass wall fitting 3. Ring, locking, fiberglass wall fitting 4. Nut, fiberglass wall fitting 5. Gasket, fiberglass wall fitting
fittings
64
Part # xxgasket
C A
dimension A dimension B dimension C THD 20nut 3-15/32" 25nut 3-25/32" 2-5/8" 3-1/4" 5/8" 17/32" 2" NPSC 2-1/2" NPSC
THD
B C
Part # xxnut101
Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits 1" or 1" Pipe) Features
Slips inside 1" pipe or outside 1" pipe Integrated water stop to reduce leaks Eyeball available in four orifice sizes (1", ", ", slotted) Manufactured from engineered polymer UV-resistant ABS material 250 per case Addl orifice size suffix: "-B, "-C, slotted-D (ie. 301B = white " orifice)
2-11/32 2-3/32 1 1-5/16 3 2-13/32 2 1
1. Flush mount return fitting, 1"/1.5", body 2. Flush mount return fitting, 1" eyeball 3. Flush mount return fitting, nut
Part # 3xx
Flush-Mount Return Fitting with Water Stop (Fits Outside 1" Pipe) Features
Fits outside 1" pipe 1" FPT in front face Finishes flush, no protrusion past the surface Integrated water stop reduces leaks Manufactured from engineered polymer UV-resistant ABS material Available in four orifice sizes (1", ", ", slotted) 250 per case Addl orifice size suffix: "-B, "-C, slotted-D (ie. JE3101B = white " orifice)
2-11/32 2-3/32 1/2 1-29/32 2-13/32 3 2 1
1. Flush mount return fitting, 1.5", body 2. Flush mount return fitting, 1/2" eyeball 3. Flush mount return fitting, nut
Part # JE31xx
aquastar product catalog
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
Vacuum Fitting with Water Stop (Fits Outside 1" Pipe) Features
Fits outside 1" pipe 1" FPT in front face Finishes flush, no protrusion past the surface Integrated water stop reduces leaks Manufactured from engineered polymer UV-resistant ABS material 250 per case
2-3/32 1-29/32 2-13/32
2-11/32
Part # 32xx
fittings
Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits Inside 2" Pipe) Features
Slips inside 2" pipe Integrated water stop to reduce leaks Eyeball available in four orifice sizes (1", ", ", slotted) Manufactured from engineered polymer UV-resistant ABS material 250 per case Addl orifice size suffix: "-B, "-C, slotted-D (ie. 3301B = white " orifice)
2-11/32 2-3/32 1/16 33xx = 1" 33xxb = 3/4" 33xxc = 1/2" 33xxd = slot 2-1/16 1 2 3 2-3/8 1-1/16
2" slip-insider
1. Flush mount return body, fits inside 2" pipe 2. Eyeball, 1", 3/4", 1/2", or slotted orifice 3. Locking ring, flush mount
Part # 33xx
Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits Over 2" Pipe) Features
Slips outside 2" pipe Integrated water stop to reduce leaks Eyeball available in four orifice sizes (1", ", ", slotted) Manufactured from engineered polymer UV-resistant ABS material 250 per case Addl orifice size suffix: "-B, "-C, slotted-D (ie. 3501B = white " orifice)
3/4 1 2 3 2-13/32 2-11/32 1-3/16
1. Flush mount return w/water barrier, 2" socket 2. 200 series eyeball, .75" orifice 3. Eyeball locking ring
Part # 35xx
15/16
3/8
1. 1.5" Australian return knock-in fitting 2. 1.5" Australian retrun fitting eye ball
Part # 4xx
1-19/32
fittings
65
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
1. 1.5" directional knock-in fitting, body 2. 100 series eyeball, 1" orifice 3. Standard eyeball locking ring
Part # 4xxx
1-5/8
fittings
66
5.983 4
1. 1" Australian return knock-in fitting 2. 1" Australian return fitting eye ball
Part # 5xx
1-1/32
1. 1" directional eyeball knock-in fitting body 2. 100 series eyeball, 1" orifice 3. Decorative cover eyeball locking ring
1-1/32
Part # 5xxx
aquastar product catalog
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
3/8"
15/32" 1-1/2"
Part # 6xx
fittings
Part # CM6xx
4"
1. 2" directional eyeball knock-in fitting body 2. 100 series eyeball, 1" orifice 3. Standard eyeball locking ring
Part # 6xxx
2-1/16
Part # 7xx
fittings 67
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
"A"
1-27/32
25/32
Part # 8xxx
fittings
68
2-5/32
Part # SL8xxx
1-19/32
1. 1.5" directional slip insider, body 2. 100 series eyeball, 1" orifice 3. Standard eyeball locking ring
Part # ASDxxx
1"
Part # BSASDxxx
1. 1/2" extender x 1-1/4" MPT body 2. 100 series eyeball, 1" orifice 3. Eyeball locking ring
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
AquaStop Pipe Sleeve with Threaded Slurry Seal Cap and O-ring 1"/ 2"/ 2"/ 3" Features
Similar to original AquaStop pipe sleeve (see p/n WSxxx) except engineered with additional female thread for polypropylene cap and gasket seal Excess glue will not stick to polypropylene cap Apply with PVC glue to drain pipe prior to pool finish with cap attached to prevent slurry from going into pipes (remove cap after pool finish and acid wash) AquaStop pipe sleeve prevents leaks after start-up Helps avoid costly repairs Available in four sizes Manufactured from engineered PVC and polypropylene materials 250 per case
1.5" 2" 2.5" 3" 1 29/32" 2 3/8" 2 7/8" 3 17/32"
1
27/32" 27/32" 27/32" 1 1/8"
Part # BC2000-x
1. Water stop with internal threads 2. Water stop threaded cap 3. Water stop o-ring
fittings
1-19/32"
1-1/16"
Part # BU101-2x1.5
1-29/32"
BU101-4x3
3-17/32"
Part # BU101-4x3
3-15/16"
1" Safety Grate Insert (for Use on Fittings Only) 1" MPT Features
Manufactured from UV-resistant ABS material Threads directly into 1" FPT CAUTION: Not to be used as a suction outlet under any circumstances 250 per case
2.149"
.535"
.575"
Part # CFMxxx
1 1/2" NPT
fittings
69
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
Part # CSxxx-x
fittings
70
Part # DCxxx
1. 1-1/2" MPT to eyeball body 2. 100 series eyeball, 1" orifice 3. Decorative cover eyeball locking ring
27/32
Part # ENxxx
Large Wall Fitting with Threaded O.D. (Fits 1" Pipe) for Fiberglass/Vinyl Features
Standard 1022 fits outside 1" pipe, threads inside 2" pipe 1" FPT in front face Large flange camouflages pipe and surface construction variations See also decorative cover p/n DCxxx to make existing 1022s like new with different colors Manufactured from engineered polymer UV-resistant ABS material 250 per case
5/16 3-15/32 1-25/32 1-29/32 2-11/32
1-23/32
Part # ES1022xx
13/16
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
Large Wall Fitting with Water Stop (Fits 1" Pipe) Features
Fits outside 1" pipe 1" FPT in front face Similar to standard 1022 but with integrated water stop to reduce leaks Large flange camouflages pipe and surface construction variations See also decorative cover p/n DCxxx to make existing 1022s like new with different colors Manufactured from engineered polymer UV-resistant ABS material 250 per case
3-15/32
1-29/32
1-29/32 2-11/32
Part # ES1022WBxx
2-13/32 Hex
5/16
fittings
Large Wall Fitting with Threaded O.D. (Fits 1" Pipe) with Lock Nut and Gasket For Fiberglass/Vinyl Features
Standard 1022 fits outside 1" pipe, threads inside 2" pipe 1" FPT in front face Large flange camouflages pipe and surface construction variations See also decorative cover p/n DCxxx to make existing 1022s like new with different colors Manufactured from engineered polymer UV-resistant ABS material 250 per case
3-7/16 Accepts 1-5/8 Eyeball 1-1/2" socket 1-1/2" straight pipe thd. 3/8 1-5/16 13/16
1-23/32
Part # ES1022Vxx
7/8"
1/2"
1 2
Part # EVT101
2-7/8"
Part # GDDxxx
2-3/8"
1. 2" x 4" gutter/deck drain body 2. 2" x 4" gutter/deck drain cover 3. #10 flat head phillips screw
fittings
71
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
1. Hydrostatic relief valve body 2. Hydrostatic relief valve cap 3. Hydrostatic relief valve retainer 4. Spring, hydrostatic relief valve 5. O-ring, hydrostatic relief valve 6. Reducer bushing, 1-1/2 MPT
1-5/16
Part # HVxxx
fittings
72
Part # HWPL100
Part # JMCP109
" Extender with Plaster Cap and Three-Piece Decorative Cover Features
Screws into 1" FPT Removable plaster cap prevents slurry from entering pipes during pool finish, keeps threads clean Great for old 1022 fitting remodels, adds " for new finish Eliminates the need for costly removal of old fittings (just screw in) Stack more than one for longer extension Large flange camouflages pipe and surface construction variations Eyeball available in four orifice sizes (1", ", ", slotted) Manufactured from UVresistant ABS material 125 per case Addl orifice size suffix: "-B, "-C, slotted-D (ie. MP101B = " orifice)
6 1" 1/2" 3/4" 3-11/16" 2-9/32" 1-3/32" 2 5 7/16" 1-1/2" MPT thread
7 4 3 1
Part # MPxxx
1. 1-1/2" MPT to eyeball body 2. 100 series eyeball, 1" orifice 3. Decorative cover eyeball locking ring 4. 1/2" extender body
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
Part # SSxxx
3-15/32"
fittings
2-31/32"
SWAxxx
SWCxxx
2" socket
SWBxxx
SWDxxx
1-7/32"
11/16"
Part # TMxxx
fittings 73
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
1-13/32 29/32
Part # TSxxx
fittings
74
7-13/32"
Part # USxxx
Part # SMUSxxx
Part # USCGxxx
aquastar product catalog
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
4"S x 4"S x 2"S x 2"S Horizontal T with Two 4" x 3" Reducer Bushings Features
NSF-approved materials Universal fit for AquaStar skimmer bottom, and "B" 2 port PVC sumps Converts two 2" spigot to 4" or 3" T Comes complete with two 4" x 3" reducer bushings p/n BU101-4x3 Schedule 40 white PVC 12 per case 2 1
2-7/8"
3-1/8"
1. 2.5" socket to 4" socket adapter bushing, qty 2 2. 4" spc. to 3" socket adapter
fittings
3-7/16"
5-3/16"
4-17/32"
3-17/32"
Part # BFB101
2" spigot
1/8
2-3/8
1/8
1 1/2" spigot
1/8 1-7/8
fittings
75
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
Socket and Jet Removal Tool for Most Major Brand Return Fittings Features
Perfect for homeowners and pool service professionals to make adjustments to jet or directional eyeball locking ring Manufactured from super strong GF nylon
11-31/32" 1-3/4" 15/16"
Two size hex sockets on end of wrench allow for jet removal or adjustment of most styles Fits most adjustable eyeball locking rings 25 per case
2"
10-1/8"
9/16" HEX
11/16" HEX
Part # VSJW102
fittings
76
Features
Prevents leaks Helps avoid costly repairs Available in five sizes Manufactured from engineered polymer PVC material 250 per case
Water Stop
Plaster
Gunite Pipe
Part # WSxxx
WS801 1" WS901 1" WS1001 2" WS1101 2" WS1201 3"
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
NEW
fittings
5 2x ~4-7/8 2x ~4-1/2 2x 4-1/4 2x ~3-3/16 2 4 ~3-31/32 4-5/8 ~19/32 ~4-1/32 ~1-11/32 1" spc. 1 8 6 3 9 7
1. Body, wall jet 2. Eye ball, 1/2 mpt, wall jet 3. Single nozzle, wall jet 4. Flow insert, wall jet 5. Cover, wall jet 6. *Gasket, wall jet 7. Dual nozzle, wall jet
8. Pipe adapter, wall jet 9. *Screw, wall jet 10. Plug, wall jet *not included with WJxxx
fittings
77
drains
78 aquastar product catalog
NEW
spa jets
AquaThunder spa jets are designed for maximum efficiency. The soothing water/air combination will give your next spa project great therapeutic massage action. The PVC housing makes assembly a breeze and threaded interchangeable jet barrels are available for a variety of combinations. The adjustable jet fitting is made with a flange so it won't interfere with the adjustment ring on the jet barrel. The pool finish can go right up against the outer flange giving it a very clean look.
80
STANDARD COLORS
101
102
103
105
108
OPTIONAL COLORS
104
106
107
NEW
25/32
Part # ATBxxx
1-15/32
NEW
1-11/16
2-1/8
spa jets
Part # ATBTSxxx
1-15/32
NEW
4-3/32 2-1/8
Part # ATFxxx
1-1/16"
NEW
2-27/32
Part # ATHxxx
spa jets 81
fittings
82
flowstar skimmers
Flow Star Standard Skimmer with Water Stop Face, Float Assembly, Basket, Lid and Adjustable Collar
Features
Adjustable collar Weir plate with easy snap in and out locks Self-contained gunite grip, water stop on face plate to prevent water leaks Large self-contained basket with lock-in feature (will not float) Pre-installed O-ring for float assembly Underwater dampers on face plate for noise reduction on weir plate especially on windy days Super strong engineered polymer upper housing Extra heavy duty PVC lower unit (does not require transitional glue) 2" outside slip and 2" inside slip (outside skimmer) 2" threads for pressure testing (inside skimmer) Built-in overflow or fill line knock out Upper housing has pre-cut rebar cut outs with pre-drilled holes for tie wire Additional box inside skimmer box for basket, float assembly and weir plate (so assembly does not get lost on job site) Skimmer Lid and Collar G154 UV tested NSF 50 approved for commercial use, 25 GPM min, 55 GPM max. Approved for residential use up to 100 GPM Optional custom name/logo engraved on lid (requires minimum 100 piece lid order) 1 per case
Part # SKR1xx
STANDARD COLORS 101 102 103
19-25/32 15-25/32 10-9/32 6-1/16 1-5/16
Optional vacuum plate with snap-in lug can be glued in under lid for easy storage p/n SK43xx
skimmers
84
105 108
12-29/32 10-1/4
3 2 5
8-11/16
Skimmer with square lid: p/n SKR164xx Available without lid and collar: p/n SKR1NL 01 (white only) 1. Skimmer, body, concrete/gunite 2. Collar, skimmer 3. Lid, skimmer 4. Skimmer, float assy. 5. Basket, skimmer 6. Weir assy., skimmer 7. O-ring, #257, float seal 8. 2" NPT port plug
6 1
Flow Star Standard Skimmer with Flush Face, Float Assembly, Basket, Lid and Adjustable Collar
Features
Adjustable collar Weir plate with easy snap in and out locks Large self-contained basket with lock-in feature (will not float) Pre-installed O-ring for float assembly Underwater dampers on face plate for noise reduction on weir plate especially on windy days Super strong engineered polymer upper housing Extra heavy duty PVC lower unit (does not require transitional glue) 2" outside slip and 2" inside slip (outside skimmer) 2" threads for pressure testing (inside skimmer) Built-in overflow or fill line knock out Upper housing has pre-cut rebar cut outs with pre-drilled holes for tie wire Skimmer Lid and Collar G154 UV tested NSF 50 approved for commercial use, 25 GPM min, 55 GPM max. Approved for residential use up to 100 GPM Optional custom name/logo engraved on lid (requires minimum 100 piece lid order) 1 per case
Part # skr2xxx
STANDARD COLORS 101 102 103
19-21/32 14-15/16 10-7/32 5-1/4
Optional vacuum plate with snap-in lug can be glued in under lid for easy storage p/n SK43xx
skimmers
1-1/4 10-3/16
3 2
105 108
7-7/16
7 4
Skimmer with square lid: p/n SKR264xx Available without lid and collar: p/n SKR2NL01 (white only)
1. 2. 3. 4. 5. 6. 7.
Skimmer, body, concrete/gunite Collar, skimmer Lid, skimmer Skimmer, float assembly Basket, skimmer Weir assembly, skimmer O-ring, #257, float seal
skimmers
85
Flow Star Skimmer with Narrow 9" Deep Throat, Float Assembly, Basket, Lid and Adjustable Collar for Vinyl/Fiberglass
Features
Adjustable collar Weir plate with easy snap in and out locks Large self-contained basket with lock-in feature (will not float) Pre-installed O-ring for float assembly Underwater dampers on face plate for noise reduction on weir plate especially on windy days Super strong engineered polymer upper housing Extra heavy duty PVC lower unit (does not require transitional glue) 2" outside slip and 2" inside slip (outside skimmer) 2" threads for pressure testing (inside skimmer) Built-in overflow or fill line knock out Upper housing has pre-cut rebar cut outs with pre drilled holes for tie wire Additional box inside skimmer box for basket, float assembly and weir plate (so assembly does not get lost on job site) Skimmer Lid and Collar G154 UV tested NSF 50 approved for commercial use, 25 GPM min, 55 GPM max. Approved for residential use up to 100 GPM Optional custom name/logo engraved on lid (requires minimum 100 piece lid order) Designed to work with allSTANDARD existing vinyl liner COLORS steel, polymer or fiberglass pool walls 101 105 1 per case
108
Optional vacuum plate with snap-in lug can be glued in under lid for easy storage p/n SK43xxx
Decorative cover removed to show screw locations
skimmers
86
3 2
6-15/16 19-15/16
8-17/32 5 2-5/16 7
Skimmer without float assemblyp/n SKRV3Nxxx (vinyl) / SKRF3Nxxx (fiberglass). Skimmer with Square Lid p/n SKRFFL3N64xxx (fiberglass with float assy), SKRVFL3N64xxx (vinyl with float assy), SKRF3N64xxx (fiberglass without float assy) SKRV3N64xxx (vinyl without float assy) Available without lid/collar p/n SKRFFL3NNL01 (fiberglass with float assy-white only), SKRVFL3NNL01 (vinyl with float assy-white only), SKRF3NNL01 (fiberglass without float assywhite only), SKRV3NNL01 (vinyl without float assy-white only)
2-1/2" Sp. x 2" Soc. x 2" NPT 10
4 9 8
1. Skimmer, body, concrete/gunite 12 2. Collar, skimmer 3. Lid, skimmer 4. Skimmer, float assembly 5. Basket, skimmer 6. Weir assembly, skimmer 7. O-ring, #257, float seal 8. 2" NPT port plug 9. Gasket, extender 9" & 12", skimmer 10. Face frame, extender 9" & 12", skimmer 11. #12 x 1-1/4" lg. (vinyl) / #12 x 1-3/4" lg. (fiberglass), flat head phillips, type b, 316 ss
11
1 6
103
105
108
OPTIONAL COLORS
104
106
107
1-5/16
12-29/32 10-1/4
SKR1xxx (Standard Skimmer with Waterstop Face Dual Bottom Port 2 " Spigot x 2" Socket) SKR1xxxD (Single Bottom Port 4" Socket) SKR1xxxF (Single Bottom Port 6" Socket)
8-11/16 19-25/32
Page 84
1-1/4
10-3/16
14-15/16 10-7/32
5-1/4
7-7/16
19-21/32
SKR2xxx (Standard Skimmer with Flush Face Dual Bottom Port 2 " Spigot x 2" Socket) SKR2xxxD (Single Bottom Port 4" Socket) SKR2xxxF (Single Bottom Port 6" Socket)
Page 85
18-11/16
2-15/16 6-15/16
10-23/32 9-1/16
SKRVFL3Nxxx with Float Assembly and SKRV3Nxxx without Float Assembly (Dual Bottom Port 2 " Spigot x 2" Socket)
8-17/32
SKRVFL3NxxxD and SKRV3NxxxD (Single Bottom Port 4" Socket) SKRVFL3NxxxF and SKRV3NxxxF (Single Bottom Port 6" Socket)
Page 86
SKR164xxx (Standard Skimmer with Waterstop Face Dual Bottom Port 2 " Spigot x 2" Socket) SKR164xxxD (Single Bottom Port 4" Socket)
8-11/16
skimmers
2-1/8
10-3/16
15-1/32 10-13/32
5-13/32
7-7/16 20-1/2
SKR264xxx (Standard Skimmer with Flush Face Dual Bottom Port 2 " Spigot x 2" Socket) SKR264xxxD (Single Bottom Port 4" Socket) SKR264xxxF (Single Bottom Port 6" Socket)
Page 85
18-25/32 9-5/32
2-15/16 6-15/16
10-23/32 9-1/16
8-17/32 2-5/16
SKRVFL3N64xxx with Float Assembly and SKRV3N64xxx without Float Assembly (Dual Bottom Port 2 " Spigot x 2" Socket) SKRVFL3N64xxxD and SKRV3N64xxxD (Single Bottom Port 4" Socket) SKRVFL3N64xxxF and SKRV3N64xxxF (Single Bottom Port 6" Socket)
21-5/8
Page 86
skimmers
87
SKIMMER ACCESSORIES
STANDARD COLORS 101 102 103 105 108 OPTIONAL COLORS 104 106 107
Skimmer Basket
Large self-contained basket locks in to remain in place during on and off pump cycles
Part # SK6
50/case
Part # SECxxx
20/case
Float Assembly
O-ring gasket seals and locks float to remain at desired level during on and off pump cycles
skimmers
88
Part # SKFL101
24/case
Part # SKWDxxx
24/case
Weir Clips
Clips snap in/out for easy replacement
Part # SK9xxx
Set of 2, 50 sets/case
Part # RTxxx
25/case
SKIMMER ACCESSORIES
STANDARD COLORS 101 102 103 105 108 OPTIONAL COLORS 104 106 107
Vacuum Plate
Snaps under skimmer lid for easy storage
Part # SK5xxx
20/case
Part # SK43xxx
25/case
skimmers
Part # SKRTxxx
25/case
Part # SK61xxx
6/case
Part # SK63xxx
24/case
Part # SK64xxx
6/case
skimmers
89
drains
pool cleaners
90
StarzTruck Automatic Suction Pool Cleaner for Concrete & Vinyl/Fiberglass Pools
Features
Programmed movement for better cleaning Efficient, quiet operation Highly engineered for durability Simple installation, no additional tools required Vinyl/fiberglass or concrete Easy grip roll bar handle Private label grill insert available Patent-pending design Kit includes cleaner, nine connector hoses, one leader hose, regulator valve, skimmer cone,safety vacuum lock wall fitting, flow gauge and owners manual Replacement parts and kits available from ProStar Replacement Parts, a division of AquaStar Pool Products For more information, visit ProStarReplacementParts.com or call 877-768-2717 1 per case
Includes flow gauge, hoses, regulator valve, skimmer cone and safety vacuum lock wall fitting
13-27/32 9-17/32
pool cleaners
13-21/32 4-31/32
8-7/16
pool cleaners
91
StealthStar Automatic Pressure Side Pool Cleaner for All Pool Finishes
Features
Double Venturi jets enable quicker cleaning and more vacuum power Brushes and scours the floor and walls of any size pool Works separately from the rest of the pool on its own booster pump Handy filter bag catches debris before it gets trapped in your pump or filter, extending the life of your equipment Highly engineered for durability Simple installation, no additional tools required Works on all pool finishes Replacement parts and kits available from ProStar Replacement Parts, a division of AquaStar Pool Products For more information, visit ProStarReplacementParts.com or call 877-768-2717 1 per case
coming soon!
Part # SSCxxxx-H
pool cleaners
92
16-3/32 59-3/8
Chlorinators
Features
For permanent installation in return line on pressure side of pump, downstream of all equipment, in new or existing pools or spas Standard with 2-inch slip PVC fittings and adapters for 1 -1/2 in. Completely enclosed system no escaping gases, so no special venting is required 50 PSI maximum operating pressure Features an external fine control valve that lets you adjust the feed rate to meet specific pool or spa needs Top-load large or small Trichlor or Bromine slow-dissolving tablets enables an effective, trouble-free way to sanitize your pool or spa 1 per case
NEW
Part # CH100
STANDARD COLORS White
16 4 5 1. CH1007 CH100 body 2. CH1008 bottom o-ring 3. CH1005 diverter tee 4. CH1004 3" threaded cap 5. CH1009 3" O-ring 6. CH1010 check valve 7. CH1015 1/2" MPT PVC plug 8. CH1016 2" x 1-1/2" S x S bushing, qty 2 9. CH1017 1/2" NPT x tube fitting w/nut, qty 2 10. CH1018 1/2" x short MPT nipple 11. CH1019 1/2" chlorine control valve 12. CH1026 5/8" OD chlorinator tube 13. CH1027 tube support spring 14. CH1029 screen 15. CH1030 standpipe adapter 16. CH1031 5/8" OD 18" tube (optional top feed) 9
15
14
7 1
6 2 8 3 9 12 13
10 11
94
ProStar
ProStar All-American REPLACEMENT PARTS FOR the STARZTRUCK automatic pool cleaner
1. Top Shell HWN121xx 2. Cone Gear HWN122
3. Intermediate Gear HWN123 4. Intermediate Gear Shaft HWN124 5. Spindle Gear Screw HWN125 6. Spindle Gear HWN126 7. Spindle Gear Bushing HWN127 8. Cone Gear Bushing HWN128 9. Upper Middle Body HWN129 10. Upper Body Screw Kit (Six Pack) HWN130 11. Medium Turbine Drive Gear HWN131 12. Medium Turbine HWN132 13. Medium Turbine Case with Axle HWN133 14. Gear Box Assembly HWN134 15. Rear Screen HWN135xx 16. Float Kit (Two Pack) HWN136 17. Lower Middle Body HWN137 18. Bumper HWN138xx 19. Middle Body Screw (Six Pack) HWN139 20. Lower Body Screw (Four Pack) HWN140 21. Flap Adjuster HWN141 22. Lower Body HWN142xx 23. Flap Kit HWN143xx 24. Pod Screw Kit HWN110 25. Pod Plugs (Six Pack) HWN111 26. Wing Kit: Left and Right Wings HWN117xx 7a. Pod Shoes (Four Pack) for Vinyl 2 HWN114 7b. Pod Shoes (Four Pack) for 2 Concrete HWN115 28. Captive Screw / Retaining Clip HWN148 29a. Fixed Access Cover Assembly for Concrete Models HWN149xx 9b. Fixed Access Cover Assembly 2 for Vinyl Models HWN157xx 30. Pod Kit HWN116xx 31. Turbine Bearings HWN112 32. Skimmer Cone HWN152 33. Leaf Canister HWN162 34. Regulator Valve HWN161 35. Safety Vacuum Lock Wall Fitting VLK15Txx 36. Flow Gauge HWN153 37. Hose Connector HWN158 38. Four-Foot Regular Hose SZTHxx 39. Four-Foot Leader Hose SZTHLxx Replacement Kits Medium Turbine/Spindle Gear Kit HWN154 (see page 103) Universal A-Frame Kit HWN118 (see page 103) Turbine Kit HWN113 (see page 103) ropulsion/Conversion Kit HWN160 P (see page 103) A-Frame and Turbine Kit HWN119 (see page 103) A-Frame/Bushing/Saddle Kit HWN120 (see page 103)
34 39
ProStar
32 37
33 38
32 34 37 39
33 35 38 40 32
32 34 36 37 39 41 33 38
33 35 38 40 32 34 37 39
32 34 36 37 39 41
33 35 38 40
34 36 39 41
35 40 34 36 39 41
36 41 35 40 36 41
33 35 32 34 36 33 35 38 40 37 39 41 38 40
35 40
36 41
37
96 ProStar
18
2 5 3 8 4 7 6
ProStar
11 12 13 15 16 14 19 31 20 21 26 25 24 23 17
30
22 10 29
27
28
ProStar # HWN121xx
REPLACES # AXV411LG
ProStar # HWN122
REPLACES # AXV070
ProStar # HWN123
REPLACES # AXV301
ProStar # HWN124
REPLACES # AXV309
ProStar
Intermediate Gear
ProStar # HWN125
REPLACES # AXV068
ProStar # HWN126
REPLACES # AXV303
Spindle Gear
ProStar # HWN127
REPLACES # AXV066A
ProStar # HWN128
REPLACES # AXV306
ProStar # HWN129
REPLACES # AXV060WH
10
ProStar # HWN130
REPLACES # AXV065P
11
ProStar # HWN131
REPLACES # AXV064A
12
ProStar # HWN132
REPLACES # AXV062C
ProStar
Medium Turbine
13
ProStar # HWN133
REPLACES # AXV009
14
ProStar # HWN134
REPLACES # AXV408P
15
ProStar # HWN135xx
REPLACES # AXV051AWH
16
ProStar # HWN136
REPLACES # AXV054P
Rear Screen
17
ProStar # HWN137
REPLACES # AXV050CHW
18
Bumper
ProStar # HWN138xx
REPLACES # AXV605WHP
19
ProStar # HWN139
REPLACES # AXV057P
20
ProStar # HWN140
REPLACES # AXV313
ProStar
21
ProStar # HWN141
REPLACES # AXV031B
22
ProStar # HWN142xx
REPLACES # AXV230DBKXWH
Flap Adjuster
Lower Body
23
ProStar # HWN143xx
REPLACES # AXV434BKP
24
ProStar # HWN110
REPLACES # AXV015P
25
ProStar # HWN111
REPLACES # AXV016P
26
ProStar # HWN117xx
REPLACES # AXV604WHP
27a
ProStar # HWN114
REPLACES # AXV413P
27b
ProStar # HWN115
REPLACES # AXV414P
ProStar
28
ProStar # HWN148
REPLACES # AXV314P
29 a
ProStar # HWN149xx
REPLACES # AXV603
29 b
ProStar # HWN149Vxx
REPLACES # AXV603A
30
ProStar # HWN116xx
REPLACES # AXV417WHP
31
ProStar # HWN112
REPLACES # AXV055P
32
ProStar # HWN152
REPLACES # AXV093CP
Skimmer Cone
38
ProStar # HWN162
REPLACES # W560
39
ProStar # HWN161
REPLACES # V094P
ProStar
Leaf Canister
Regulator Valve
40
ProStar # VLK15Txx
REPLACES # W4008WHP
43
ProStar # HWN153
REPLACES # AXV574P
Safety Vacuum Lock Wall Fitting (1" NPT) Part # VLK20Txx (2" NPT) Flow Gauge
44
ProStar # HWN158
REPLACES # AXV092
45 46
REPLACES # V109
ProStar # SZTHxx
ProStar # SZTHLxx
REPLACES # V532
Hose Connector
102 ProStar
30b
Weve made pool equipment service and repair a lot easier with these convenient replacement kits, shown below. Each kit is a complete grouping that contains everything you need for that particular repair. To stock up on individual replacement parts, see pages 96-102.
30a 30b
HWN11601 POD KIT (WHITE) REPLACES (REPLACES AXV417WHP) HWN11602 -POD KIT (BLACK) (REPLACES AXV417BKP)
33
HWN118 -UNIVERSAL A-FRAME KIT HWN120 - A-FRAME/BUSHING/SADDLE KIT # HWN118 35 41 HWN154 - MED. TURBINE/SPINDLE GEAR KIT ProStar # HWN154 ProStar - PROPULSION/CONVERSION KIT 34 40 HWN160(REPLACES AXV621D) (REPLACES AXV079VP) (REPLACES AXV621D)
# AXV079VP31
34
(REPLACES AXV622DPK)
30a 30b
41
HWN11601 POD KIT (WHITE) (REPLACES AXV417WHP) HWN11602 -POD KIT (BLACK) (REPLACES AXV417BKP)
Universal A-Frame Kit
31
35
35
ProStar # HWN113
36
37
ProStar # HWN119
REPLACES # AXV621DAT
Turbine Kit: Turbine and Two HWN120 Turbine Bearings A-Frame and Turbine - A-FRAME/BUSHING/SADDLE KITKit
41
(REPLACES AXV621D)
35
40
37
ProStar # HWN120
34
41
ProStar # HWN160xx
REPLACES # AXV622DPK
Propulsion/Conversion Kit
ProStar 103
ProStar All-American REPLACEMENT PARTS FOR the StealthStar automatic Pressure Side cleaner
SS1 P1015 All-Purpose Bag, Sand/Silt Bag, Leaf Bag SS2 P2031 Screw 10-32x3/8 SS3 P2104xx Top SS4 P1014 Float SS5 P2059 Sweep Hose Scrubber SS6 P1034 Orifice Tip with Guard SS7 P1016 Complete Sweep Hose SS8 P2056 Wear Rings SS9 P2053 Sweep Hose Attach Clamp SS10 P2043 Adjustment Screw, Sweep Hose SS11 P2048 Feed Pipe SS12 P1032 Vacuum Tube SS13 P1004 Large Axle with Washer and Sand Guard SS14 P2042 10-32x7/8 Screw SS15 P2038 Lock Washer SS16 P2016 Axle Plate SS17 P1005 Ball Bearings and Wheels SS18 P2014 Wheel Screw SS19 P2013 Wheel Washer SS20 P2015 Tire SS21 P2012 Wheel SS22 P2017 Large Axle (Rear Wheel Only) SS23 P1035 Thrust Jet Kit SS24 P2022 Small Idler Wheel SS25 P2035 4-40x3/16" Screw SS26 P2036 6-32x1/2" Screw SS27 P2037 Spring SS28 P1036 Swing Axle Kit SS29 P1037 Bottom Bracket SS30 P1009 Water Management System SS31 P1017 Frame SS32 P1002 Ball Bearings and Turbine SS33 P1038 Turbine Shaft Tube SS34 P2044 Hose Clamp SS35 P2003 Turbine Shaft Seal SS36 P1001 Drive Shaft Assembly SS37 P2045 Hose SS38 P1033 Turbine Cover SS39 P2052 Bag Collar
ProStar
104 ProStar
SS
SS
SS SS
11
SS
SS
10
SS
SS
12
SS
38 35
SS
SS
SS
SS
32 34
SS
SS
18 37
SS
SS
22
SS
14
SS
15 16
SS SS
SS
19 9
SS
SS
36
SS
33
21 13 31
SS SS
SS
20
SS
17
SS
23 25
SS
SS
27
SS
26 30
SS
SS
ProStar
29
SS SS
SS
24
SS
28
39
ProStar 105
SS1
ProStar # P1015
SS2
ProStar # P2031
REPLACES # C-40
SS3
ProStar # P2104
REPLACES # K-5
SS4
ProStar # P1014
REPLACES # A-20
ProStar
Top
Float
SS5
ProStar # P2059
REPLACES # 9-100-3105
SS6
ProStar # P1034
REPLACES # B-25
SS7
ProStar # P1016
REPLACES # B-5
SS8
ProStar # P2056
REPLACES # B-10
Wear Rings
SS9
ProStar # P2053
REPLACES # B-15
SS10
ProStar # P2043
REPLACES # B-20
SS11
ProStar # P2048
REPLACES # K-30
SS12
ProStar # P1032
REPLACES # K-20
ProStar
Feed Pipe
Vacuum Tube
SS13
ProStar # P1004
REPLACES # C-66
SS14
ProStar # P2042
REPLACES # C-76
SS15
ProStar # P2038
REPLACES # C-45
SS16
ProStar # P2016
REPLACES # C-70
Lock Washer
Axle Plate
ProStar 107
SS17
ProStar # P1005
REPLACES # C-60
SS18
ProStar # P2014
REPLACES # C-55
Wheel Screw
SS19
ProStar # P2013
REPLACES # C-64
SS20
ProStar # P2015
REPLACES # C-10
ProStar
Wheel Washer
Tire
SS21
ProStar # P2012
REPLACES # C-6
SS22
ProStar # P2017
REPLACES # C-65
Wheel
SS23
ProStar # P1035
REPLACES # C-131
SS24
ProStar # P2022
REPLACES # C-16
SS25
ProStar # P2035
REPLACES # C-30
SS26
ProStar # P2036
REPLACES # C-32
SS27
ProStar # P2037
REPLACES # C-25
SS28
ProStar # P1036
REPLACES # C-36
ProStar
Spring
SS29
ProStar # P1037
REPLACES # K-10
SS30
ProStar # P1009
REPLACES # K-25
Bottom Bracket
SS31
ProStar # P1017
REPLACES # K-145
SS32
ProStar # P1002
REPLACES # C-80
Frame
SS33
ProStar # P1038
REPLACES # C-83
SS34
ProStar # P2044
REPLACES # 9-100-7170
Hose Clamp
SS35
ProStar # P2003
REPLACES # A-40
SS36
ProStar # P1001
REPLACES # C-86
ProStar
SS38
ProStar # P1033
REPLACES # C-110
7-1/2" Hose
REPLACES # 9-100-1018
ProStar # SSC100
Bag Collar
110 ProStar
ProStar
ProStar 111
112
Index
Part #
Part Description
pg #
Drains
10AVRxxx 10AVRxxxA 10AVRxxxB 10AVRxxxD 10AVRxxxF 10AVWRxxx 10AVWRxxxA 10AVWRxxxB 10AVWRxxxD 10AVWRxxxF 10LTxxx 10LTxxxA 10LTxxxB 10LTxxxD 10LTxxxF 1216xxx 1216xxxA 1216xxxB 1216xxxD 1216xxxF 24xxx 24NFxxx 32CDAVFRxxx 32CDAVFGxxx 32CDAVNFxxx 32CDAVxxx 32CDAVPxxx 32CDAVVxxx 32CDFLFRxxx 32CDFLFGxxx 32CDFLNFxxx 32CDFLPxxx 32CDFLVxxx 32CDFLxxx 32CDLTFGxxx 32CDLTFRxxx 32CDLTxxx 32CDLTPxxx 32CDLTVxxx 32CDPxxx 32CDPHFGxxx 32CDPHFRxxx 10" Anti-Entrapment Suction Outlet Cover, Solid Riser Ring and Mud Frame 10" Anti-Entrapment Suction Outlet Cover, Solid Riser Ring with Double-Deep Sump 10" Anti-Entrapment Suction Outlet Cover, Solid Riser Ring with Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 10" Anti-Entrapment Suction Outlet Cover, Solid Riser Ring with 4" Socket Deep PVC Sump 10" Anti-Entrapment Suction Outlet Cover, Solid Riser Ring with 6" Socket Deep PVC Sump 10" Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame 10" Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with Double-Deep Sump 10" Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 10" Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 4" Socket Deep PVC Sump 10" Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame with 6" Socket Deep PVC Sump 10" Round Debris Catcher Anti-Entrapment Suction Outlet Cover and Mud Frame 10" Round Debris Catcher Anti-Entrapment Suction Outlet Cover and Mud Frame with Double-Deep Sump 10" Round Debris Catcher Anti-Entrapment Suction Outlet Cover and Mud Frame with Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 10" Round Debris Catcher Anti-Entrapment Suction Outlet Cover and Mud Frame with 4" Socket Deep PVC Sump 10" Round Debris Catcher Anti-Entrapment Suction Outlet Cover and Mud Frame with 6" Socket Deep PVC Sump 16" Square Anti-Entrapment Suction Outlet Cover, Mud Frame and 12" Square Retro-Adapter Frame 16" Square Anti-Entrapment Suction Outlet Cover, Mud Frame and 12" Square Retro-Adapter Frame with Double-Deep Sump 16" Square Anti-Entrapment Suction Outlet Cover, Mud Frame and 12" Square Retro-Adapter Frame with Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 16" Square Anti-Entrapment Suction Outlet Cover, Mud Frame and 12" Square Retro-Adapter Frame with 4" Socket Deep PVC Sump 16" Square Anti-Entrapment Suction Outlet Cover, Mud Frame and 12" Square Retro-Adapter Frame with 6" Socket Deep PVC Sump 24" Square Frame with Four 12"Square Flat Grate Anti-Entrapment Suction Outlet Covers Four 12"Square Flat Grate Anti-Entrapment Suction Outlet Covers for " Deep Retrofits 32" Channel Drain Anti-Entrapment Suction Outlet Cover and Frame 32" Channel Drain Anti-Entrapment Suction Outlet Cover and Frame 32" Channel Drain Anti-Entrapment Suction Outlet Cover Only without Mud Frame 32" Channel Drain with ABS Three-Port Sump/Anti-Vortex Anti-Entrapment Suction Outlet Cover 32" Channel Drain Anti-Entrapment Suction Outlet Cover and PVC Three-Port Manufactured Sump 32" Channel Drain Anti-Entrapment Suction Outlet Cover and ABS Three-Port Manufactured Sump 32" Channel Drain Flat Grate Anti-Entrapment Suction Outlet Cover and Frame 32" Channel Drain Flat Grate Anti-Entrapment Suction Outlet Cover and Frame 32" Channel Drain with Flat Grate Anti-Entrapment Suction Outlet Cover Only without Mud Frame 32" Channel Drain Flat Grate Anti-Entrapment Suction Outlet Cover and PVC Three-Port Manufactured Sump 32" Channel Drain Flat Grate Suction Outlet Cover and ABS Three-Port Manufactured Sump 32" Channel Drain Flat Grate Anti-Entrapment Suction Outlet Cover and ABS Three-Port Manufactured Sump 32" Channel Drain Debris Catcher Suction Outlet with Frame 32" Channel Drain Debris Catcher Suction Outlet with Frame 32" Channel Drain Debris Catcher Suction Outlet with ABS Three-Port Manufactured Sump 32" Channel Drain Debris Catcher Suction Outlet with PVC Three-Port Manufactured Sump 32" Channel Drain Debris Catcher Suction Outlet with ABS Three-Port Manufactured Sump 32" Channel Drain Three-Port Manufactured PVC Sump 32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover with Mud Frame 32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover with Mud Frame 56 56 56 55 47 57 53 53 53 47 54 52 60 59 58 47 60 46 50 50 24 25 25 25 25 22 23 23 23 23 26 27 27 27 27 38 39 39 39 39 45
index
113
Index
Part #
Part Description
pg #
Drains continued
32CDPHPxxx 32CDPHVxxx 32CDPHxxx 32CDSBxxx 32PDxxx 415SIxxx 415Txxx 420SIxxx 420T15Sxxx 4HPxxx 6HA25T20Sxxx 6HPHAxxx 6HPxxx 8AVWRxxx 8AVWRxxxA 8AVWRxxxB 8AVWRxxxD 8AVWRxxxF 8FUWxxx 8FUWSBACxxx 8FUWSBVxxx 8FUWSBxxx 8FUWxxxA 8FUWxxxB 8FUWxxxD 8FUWxxxF 8HPxxx 8HPMHxxx 8HPSBACxxx 8HPSBVxxx 8HPSBxxx 8HPxxxA 8HPxxxB 8HPxxxD 8HPxxxF 8SBACWRxxx 8SBWRxxx 914xxx 914xxxA 914xxxB 32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover and PVC Three-Port Manufactured Sump 32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover and ABS Three-Port Manufactured Sump 32" Channel Drain Pinhole Anti-Entrapment Suction Outlet Cover and ABS Three-Port Manufactured Sump 32" Channel Drain with ABS Three-Port Sump Only 32" Pinhole Anti-Entrapment Suction Outlet Cover and Propeller Drain Manufactured Sump
47 51 49 52 48 7 7 7 7 6 9 8 8 12 13 13 13 13 16 17 17 17 17 17 17 17 19 19 19 16 17 19 19 19 19 13 13 32 33 33
1" Slip-Insider Bulkhead Adapter for 4HPxxx 1" MPT Bulkhead Adapter for 4HPxxx 2" Slip Insider Bulkhead Adapter for 4HPxxx 2" MPT & 1" Socket Bulkhead Adapter for 4HPxxx 4" Round Hockey Puck Sumpless Suction Outlet Cover 2" Thread and 2" Socket for Fiberglass/Steel, with Gasket and 2" Locking Nut for 6HPHAxxx 6" Round Suction Outlet, HydroAir/ITT Replacement 6" Round Hockey Puck Sumpless Suction Outlet Cover 8" Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame 8" Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame with Double-Deep Sump 8" Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame with Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 8" Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame with 4" Socket Deep PVC Sump 8" Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame with 6" Socket Deep PVC Sump 8" Anti-Entrapment Suction Outlet Cover and Mud Frame 8" Anti-Entrapment Suction Outlet Cover with 8" Standard Sump with Adjustable Collar 8" Anti-Entrapment Suction Outlet Cover with 8" Standard Sump for Vinyl/Fiberglass 8" Anti-Entrapment Suction Outlet Cover with 8" Standard Sump 8" Anti-Entrapment Suction Outlet Cover and Mud Frame with Double-Deep Sump 8" Anti-Entrapment Suction Outlet Cover and Mud Frame with Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 8" Anti-Entrapment Suction Outlet Cover and Mud Frame with 4" Socket Deep PVC Sump 8" Anti-Entrapment Suction Outlet Cover and Mud Frame with 6" Socket Deep PVC Sump 8" Hockey Puck Sumpless Suction Outlet Cover and Mud Frame 8" Hockey Puck Sumpless Suction Outlet Cover with Retrofit Skimmer Equalizer Kit 8" Hockey Puck Sumpless Suction Outlet Cover with 8" Standard Sump with Adjustable Collar 8" Hockey Puck Sumpless Suction Outlet Cover with 8" Standard Sump with Standard Sump for Vinyl/Fiberglass 8" Hockey Puck Sumpless Suction Outlet Cover with 8" Standard Sump 8" Hockey Puck Sumpless Suction Outlet Cover with Double-Deep Sump 8" Hockey Puck Sumpless Suction Outlet Cover with Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 8" Hockey Puck Sumpless Suction Outlet Cover with 4" Socket Deep PVC Sump 8" Hockey Puck Sumpless Suction Outlet Cover with 6" Socket Deep PVC Sump 8" Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 8" Standard Sump with Adjustable Collar 8" Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 8" Standard Sump 14" Square Anti-Entrapment Suction Outlet Cover, Mud Frame and 9" Square Retro-Adapter Frames 14" Square Anti-Entrapment Suction Outlet Cover and 9" Square Retro-Adapter Frame with Double-Deep Sump 14" Square Anti-Entrapment Suction Outlet Cover and 9" Square Retro-Adapter Frame with Dual-Port 2" Spigot x 2" Socket Deep PVC Sump
114
Index
Part #
Part Description
pg #
Drains continued
914xxxD 914xxxF A10RCFRxxx A10RCFR2xxx A8Rxxx A8RSBACxxx A8RSBxxx A8RxxxA A8RxxxB A8RxxxD A8RxxxF BIK4 FCxxx LP8AVWRxxx LP8AVWRxxxA LP8AVWRxxxB LP8AVWRxxxD LP8AVWRxxxF LP8SBACWRxxx LP8SBWRxxx P12xxx P12xxxA P12xxxB P12xxxD P12xxxF P18xxx P18NFxxx P24xxx P24NFxxx P9xxx P9xxxA P9xxxB P9xxxD P9xxxF R415Txxx R8HPxxx RE415Txxx RNDxxx RSUN18HPHxxx RSUN18HPHRxxx SUN18HPHxxx 14" Square Anti-Entrapment Suction Outlet Cover and 9" Square Retro-Adapter Frame with 4" Socket Deep PVC Sump 14" Square Anti-Entrapment Suction Outlet Cover and 9" Square Retro-Adapter Frame with 6" Socket Deep PVC Sump 10" Round Star Sumpless Suction Outlet Cover, Universal Adapter Kit and Mud Frame 2-Pack 10" Round Star Sumpless Suction Outlet Covers and Mud Frame without Retrofit Kit Super High Flow 8" Anti-Entrapment Suction Outlet Cover, Solid Riser Ring Mud Frame Super High Flow 8" Anti-Entrapment Suction Outlet Cover and Solid Riser Ring with 8" Standard Sump with Adjustable Collar Super High Flow 8" Anti-Entrapment Suction Outlet Cover and Solid Riser Ring with 8" Standard Sump Super High Flow 8" Anti-Entrapment Suction Outlet Cover and Solid Riser Ring with Double-Deep Sump Super High Flow 8" Anti-Entrapment Suction Outlet Cover and Solid Riser Ring with Dual-Port 2" Spigot x 2" Socket Deep PVC Sump Super High Flow 8" Anti-Entrapment Suction Outlet Cover and Solid Riser Ring with 4" Socket Deep PVC Sump Super High Flow 8" Anti-Entrapment Suction Outlet Cover and Solid Riser Ring with 6" Socket Deep PVC Sump Brass Inserts with Stainless Steel Screws for Suction Outlet Retrofits 20" Full Circle Suction Outlet Cover and One-Port Manufactured Sump
33 33 21 21 10 11 11 11 11 11 11 62 61 14 15 15 15 15 15 15 34 35 35 35 35 40 40 43 43 28 29 29 29 29 7 20 7 9 42 42 42
8" Low-Profile Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame 8" Low-Profile Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with Double-Deep Sump 8" Low-Profile Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with Dual-Port 2" Spigot 8" Low-Profile Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 4" Socket Deep PVC Sump 8" Low-Profile Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 6" Socket Deep PVC Sump 8" Low-Profile Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 8" Standard Sump with Adjustable Collar 8" Low-Profile Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 8" Standard Sump 12" Square Star Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame 12" Square Star Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with Double-Deep Sump 12" Square Star Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 12" Square Star Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 4" Socket Deep PVC Sump 12" Square Star Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 6" Socket Deep PVC Sump 18" Square Mud Frame with Four 9" Square Star Suction Outlet Covers and Vented Riser Rings Four 9" Square Star Suction Outlet Covers and Vented Riser Rings for Retrofits 24" Square Mud Frame with Four 12" Square Star Anti-Entrapment Suction Outlet Covers Four 12" Square Star Anti-Entrapment Suction Outlet Covers for " Deep Retrofits 9" Square Star Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame 9" Square Star Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with Double-Deep Sump 9" Square Star Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 9" Square Star Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 4" Socket Deep PVC Sump 9" Square Star Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 6" Socket Deep PVC Sump Retrofit 1" MPT Bulkhead Adapter for 4HPxxx (also retrofits HydroAir #30-6906 and #30-6806) 8" Retrofit Hockey Puck Sumpless Suction Outlet Cover with Screw and Bushing Kit Retrofit 1" MPT Bulkhead Adapter Extended for 4HPxxx (also retrofits HydroAir #30-6906 and #30-6806) 6" Bulkhead Adapter with 2" Socket Sumpless Fitting Four 9" Square SUN/8HPH Suction Outlet Covers for 1" Deep Retrofits Four 9" Square SUN/8HPH Suction Outlet Covers for Retrofits 18" Square Mud Frame with Four 9" Square SUN/8HPH Suction Outlet Covers
index
115
Index
Part #
Part Description
pg #
Drains continued
WAV12WRxxx WAV12WRxxxA WAV12WRxxxB WAV12WRxxxD WAV12WRxxxF WAV18WRxxx WAV18WRNFxxx WAV24xxx WAV24NFxxx WAV9WRxxx WAV9WRxxxA WAV9WRxxxB WAV9WRxxxD WAV9WRxxxF 12" Square Wave Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame 12" Square Wave Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with Double-Deep Sump 12" Square Wave Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 12" Square Wave Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 4" Socket Deep PVC Sump 12" Square Wave Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 6" Socket Deep PVC Sump 18" Square Frame with Four 9"Square Wave Anti-Entrapment Suction Outlet Covers and Vented Riser Rings Four 9"Square Wave Anti-Entrapment Suction Outlet Covers and Vented Riser Rings for Retrofits 24" Square Frame with Four 12" Square Wave Anti-Entrapment Suction Outlet Covers Four 12" Square Wave Anti-Entrapment Suction Outlet Covers for Retrofits 9" Square Wave Anti-Entrapment Suction Outlet Cover, Vented Riser Ring and Mud Frame 9" Square Wave Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with Double-Deep Sump 9" Square Wave Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with Dual-Port 2" Spigot x 2" Socket Deep PVC Sump 9" Square Wave Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 4" Socket Deep PVC Sump 9" Square Wave Anti-Entrapment Suction Outlet Cover, Vented Riser Ring with 6" Socket Deep PVC Sump 36 37 37 37 37 41 41 44 44 30 31 31 31 31
Fittings
1020Fxxx 20GASKET 25GASKET 20NUT101 25NUT101 3xx 33xx 33xxB 33xxC 33xxD 32xx 35xx 35xxB 35xxC 35xxD 4xxB 4xxC 4xxx 4DIVxxx 4xx 42xx 43xx 5xx 5xxB 5xxC 5xxx 52xx Large Extended 2" Return Fitting with Gasket/Nut for Fiberglass Gasket for Vinyl, Fiberglass or Stainless Steel Installations Gasket for Vinyl, Fiberglass or Stainless Steel Installations Locking Nut for Vinyl, Fiberglass or Stainless Steel Installations Locking Nut for Vinyl, Fiberglass or Stainless Steel Installations Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits 1" or 1" Pipe) Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits Inside 2" Pipe) with 1" Orifice Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits Inside 2" Pipe) with " Orifice Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits Inside 2" Pipe) with " Orifice Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits Inside 2" Pipe) with Slotted Orifice Vacuum Fitting with Water Stop (Fits Outside 1" Pipe) Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits Over 2" Pipe) with 1" Orifice Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits Over 2" Pipe) with " Orifice Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits Over 2" Pipe) with " Orifice Flush-Mount Return Fitting with Water Stop, Eyeball and Nut (Fits Over 2" Pipe) with Slotted Orifice Australian Return Fitting with Adjustable Eyeball 1" Knock-In with " Orifice Australian Return Fitting with Adjustable Eyeball 1" Knock-In with " Orifice Three-Piece Directional Eyeball Fitting 1" Knock-In 4" Adjustable Floor Return Fitting with Water Stop Australian Return Fitting with Adjustable Eyeball 1" Knock-In with 1" Orifice Directional Eyeball Fitting, Three-Piece 1" Knock-In with " Orifice Directional Eyeball Fitting, Three-Piece 1" Knock-In with " Orifice Australian Return Fitting with Adjustable Eyeball 1" Knock-In Australian Return Fitting with Adjustable Eyeball 1" Knock-In with " Orifice Australian Return Fitting with Adjustable Eyeball 1" Knock-In with " Orifice Three-Piece Directional Eyeball Fitting 1" Knock-In with Flange/1" Orifice Three-Piece Directional Eyeball Fitting 1" Knock-In with Flange/" Orifice 64 64 64 64 64 64 65 64 64 64 65 65 65 65 65 65 65 66 66 65 66 66 66 66 66 66 66
116
Index
Part #
Part Description
pg #
Fittings continued
53xx 54xx 615SIxxx 615Txxx 6E15Txxx 620SIxxx 620T15Sxxx 625T20Sxxx 6xx 6xxx 62xx 63xx 64xx 7xx 8xxx 82xx 83xx 84xx ASDxxx ASDxxxB ASDxxxC ASDxxxD BC2000-1.5 BC2000-2 BC2000-2.5 BCR2000-3 BFB101 BSASDxxx BSASDxxxB BSASDxxxC BSASDxxxD BU101-2x1.5 BU101-4x3 CFMxxx CM6xx CSxxx-1.5 CSxxx-2 CSxxx-2.5 CSxxx-3 DCxxx DCxxxB DCxxxC DCxxxD DIV0xxx Three-Piece Directional Eyeball Fitting 1" Knock-In with Flange/" Orifice Three-Piece Directional Eyeball Fitting 1" Knock-In with Flange/Slotted Orifice 1" Slip-Insider Bulkhead Adapter for 6HPxxx 1" Threaded Bulkhead Adapter for 6HPxxx Extended 1" Threaded Sumpless Fitting for 6HPxxx 2" Slip-Insider Bulkhead Adapter for 6HPxxx 2" Threaded x 1" Socket Bulkhead Adapter for 6HPxxx 2" Threaded x 2" Socket Bulkhead Adapter for 6HPxxx Rope Anchor Directional Eyeball Fitting, Three-Piece 2" Knock-In with 1" Orifice Directional Eyeball Fitting, Three-Piece 2" Knock-In with " Orifice Directional Eyeball Fitting, Three-Piece 2" Knock-In with " Orifice Directional Eyeball Fitting, Three-Piece 2" Knock-In with Slotted Orifice Pool Wall Step/Set of Three Directional Eyeball Fitting Three-Piece 1" MPT with 1" Orifice Directional Eyeball Fitting Three-Piece 1" MPT with " Orifice Directional Eyeball Fitting Three-Piece 1" MPT with " Orifice Directional Eyeball Fitting Three-Piece 1" MPT with Slotted Orifice " Extender with Eyeball and Nut 1" MPT with 1" Orifice " Extender with Eyeball and Nut 1" MPT with " Orifice " Extender with Eyeball and Nut 1" MPT with " Orifice " Extender with Eyeball and Nut 1" MPT with Slotted Orifice 1" Water Stop with Screw-In Cap and O-Ring 2" Water Stop with Screw-In Cap and O-Ring 2" Water Stop with Screw-In Cap and O-Ring 3" Water Stop with Screw-In Cap and O-Ring 4" S x 4"S x 2"S x 2"S Horizontal T with 4" x 3" Reducer Bushings " Extender with Eyeball and Nut 1" MPT (Fits SwimQuip # 8429-14) 1" Orifice " Extender with Eyeball and Nut 1" MPT (Fits SwimQuip # 8429-14) " Orifice " Extender with Eyeball and Nut 1" MPT (Fits SwimQuip # 8429-14) " Orifice " Extender with Eyeball and Nut 1" MPT (Fits SwimQuip # 8429-14) Slotted Orifice Bushing to convert 2" to 1" Bushing to convert 4" to 3" 1" Safety Grate Insert (for Use on Fittings Only) 1" MPT Commercial Rope Anchor with Stainless Steel Pin 1" Winterizing Cap with O-ring 2" Winterizing Cap with O-ring 2" Winterizing Cap with O-ring 3" Winterizing Cap with O-ring Decorative Cover with 1" Orifice Decorative Cover with " Orifice Decorative Cover with " Orifice Decorative Cover with Slotted Orifice Floor Return Diverter Plate Only 66 66 9 9 9 9 9 9 67 67 67 67 67 67 68 68 68 68 68 68 68 68 69 69 69 69 75 68 68 68 68 69 69 69 67 70 70 70 70 70 70 70 70 66
index
117
Index
Part #
Part Description
pg #
Fittings continued
ENxxx ENBxx ENCxx ENDxx ES1022Vxx ES1022WBxx ES1022xx EVT101 GDDLxxx GDDxxx HVxxx HWPL100 JE31xx JE31xxB JE31xxC JE31xxD JMCP109 JMCP109-2 MPxxx MPxxxB MPxxxC MPxxxD PE15101 PE20101 SL8xxx SL82xx SL83xx SL84xx SMUSxxx SSxxx SWAxxx SWBxxx SWCxxx SWDxxx TMxxx TMxxxB TMxxxC TSxxx USCGxxx USxxx VSJW102 WJFxxx Standard Eyeball and Nut Replacement with 1" Orifice Standard Eyeball and Nut Replacement with " Orifice Standard Eyeball and Nut Replacement with " Orifice Standard Eyeball and Nut Replacement with Slotted Orifice Large Wall Fitting with Threaded O.D. (Fits 1" Pipe) with Lock Nut and Gasket For Fiberglass/Vinyl Large Wall Fitting with Water Stop (Fits 1" Pipe) Large Wall Fitting with Threaded O.D. (Fits 1" Pipe) for Fiberglass/Vinyl Extended Venturi Tee for Gunite with Removable Jet, 1" x 1" x 1" 2 x 4 Gutter/Deck Drain Grate only with Screws 2 x 4 Gutter Deck Drain (Fits 2" Pipe) 2" Hydrostatic Relief Valve Pump Strainer Cover, Thread Style (replaces # SPX3100D) Flush-Mount Return Fitting with Water Stop (Fits Outside 1" Pipe) with 1" Orifice Flush-Mount Return Fitting with Water Stop (Fits Outside 1" Pipe) with " Orifice Flush-Mount Return Fitting with Water Stop (Fits Outside 1" Pipe) with " Orifice Flush-Mount Return Fitting with Water Stop (Fits Outside 1" Pipe) with Slotted Orifice 1" Cap For Plastering With Magnet Finding Metal Insert 2" Cap For Plastering With Magnet Finding Metal Insert " Extender with Three-Piece Decorative Cover and Plaster Cap with 1" Orifice " Extender with Three-Piece Decorative Cover and Plaster Cap with " Orifice " Extender with Three-Piece Decorative Cover and Plaster Cap with " Orifice " Extender with Three-Piece Decorative Cover and Plaster Cap with Slotted Orifice Pipe Extender (2") Pipe Extender (1") Three-Piece Directional Eyeball Fitting 1" Slip Insider with 1" Orifice Three-Piece Directional Eyeball Fitting 1" Slip Insider with " Orifice Three-Piece Directional Eyeball Fitting 1" Slip Insider with " Orifice Three-Piece Directional Eyeball Fitting 1" Slip Insider with Slotted Orifice 5" Umbrella Stand with Sleeve and Center Cap Shell Wall Step/Set of Three 1" S x 1" SPG 90-Degree Sweep Ell 1" S x 1" S 90-Degree Sweep Ell 2" S x 2" SPG 90-Degree Sweep Ell 2" S x 2" S 90-Degree Sweep Ell 1" Orifice Straight Flow Insert with 1" MPT " Orifice Straight Flow Insert with 1" MPT " Orifice Straight Flow Insert with 1" MPT Therapeutic Spinner 1" MPT Umbrella Stand Cap Only with Gasket Seal 7" Umbrella Stand with Sleeve and Center Cap Socket and Jet Removal Tool For Most Major Brand Return Fittings Wall/Deck Spout (Fiberglass) 70 70 70 70 71 71 70 71 71 71 72 72 64 64 64 64 72 72 72 72 72 72 75 75 68 68 68 68 74 73 73 73 73 73 73 73 73 74 74 74 76 77
118
Index
Part #
Part Description
pg #
Fittings continued
WJxxx WS1001 WS1101 WS1201 WS801 WS901 Wall/Deck Spout (Gunite) 2" Waterstop 2" Waterstop 3" Waterstop 1" Waterstop 1" Waterstop 77 76 76 76 76 76
FlowStar Skimmers
RTxxx RTxxxA SECxxx SK43xxx SK5xxx SK6 SK61 SK63 SK64 SK9xx SKFL01 SKR1xx SKR164xx SKR164xxxD SKR164xxxF SKR1xxxD SKR1xxxF SKR2xxx SKR264xx SKR264xxxD SKR264xxxF SKR2xxxD SKR2xxF SKRTxxx SKRVFL3Nxxx SKRVFL3NxxxD SKRVFL3NxxxF SKRVFL3N64xxx Round Skimmer Lid (Fits Sta-Rite Size Skimmers) Round Skimmer Lid (Fits Sta-Rite Size Skimmers) with Custom Name 3" Skimmer Extension Collar Vacuum Plate Adjustable Round Skimmer Collar Skimmer Basket Square Skimmer Collar Square Skimmer Lid Square Skimmer Lid and Collar Skimmer Weir Clip (Set of Two) Skimmer Float Assembly Standard Skimmer with Float Assembly and Adjustable Collar (Dual Bottom Port 2" Spigot x 2" Socket) Standard Skimmer with Float Assembly and Adjustable Collar with Square Lid (Dual Bottom Port 2" Spigot x 2" Socket) Standard Skimmer with Float Assembly and Adjustable Collar with Square Lid (Single Bottom Port 4" Socket) Standard Skimmer with Float Assembly and Adjustable Collar with Square Lid (Single Bottom Port 6" Socket) Standard Skimmer with Float Assembly and Adjustable Collar (Single Bottom Port 4" Socket) Standard Skimmer with Float Assembly and Adjustable Collar (Single Bottom Port 6" Socket) Skimmer with Basket, Collar and Lid (Dual Bottom Port 2" Spigot x 2" Socket) Skimmer with Basket, Collar with Square Lid (Dual Bottom Port 2" Spigot x 2" Socket) Skimmer with Basket, Collar with Square Lid (Single Bottom Port 4" Socket) Skimmer with Basket, Collar with Square Lid (Single Bottom Port 6" Socket) Skimmer with Basket, Collar and Lid (Single Bottom Port 4" Socket) Skimmer with Basket, Collar and Lid (Single Bottom Port 6" Socket) Round Skimmer Lid and Collar Skimmer with Narrow 9" Deep Throat, Float Assembly, Collar and Lid for Vinyl (Dual Bottom Port 2" Spigot x 2" Socket) Skimmer with Narrow 9" Deep Throat, Float Assembly, Collar and Lid for Vinyl (Single Bottom Port 4" Socket) Skimmer with Narrow 9" Deep Throat, Float Assembly, Collar and Lid for Vinyl (Single Bottom Port 6" Socket) Skimmer with Narrow 9" Deep Throat, Float Assembly, Collar and Square Lid for Vinyl (Dual Bottom Port 2" Spigot x 2" Socket) 88 88 88 89 89 88 89 89 89 88 88 84 84 84 84 84 84 85 85 85 85 85 85 89 86 86 86 86
index
119
Index
Part #
Part Description
pg #
Pool Cleaners
SSCxxxx-H SZTxxxx-H SZTVxxxx-H StealthStar Automatic Pressure Side Pool Cleaner for All Pool Finishes StarzTruck Automatic Suction Pool Cleaner for Concrete Pools StarzTruck Automatic Suction Pool Cleaner for Concrete & Vinyl/Fiberglass Pools 92 91 91
120
Index
Part #
Part Description
pg #
index
121
Index
Part #
Part Description
pg #
Notes
122
Notes
index
123
Notes
124