Documente Academic
Documente Profesional
Documente Cultură
upper 1 2 3 4 5 9
t oven dry /h2) ca. 8 - 12 10 - 15 13 - 20 23 - 35 35 - 52 56 - 85 4.350 6.350 9.000 14.000 24.000 90.000
185 x 700 225 x 700 325 x 650 425 x 850 525 x 1.050 725 x 1.450
1) 2)
55 2 * 61
kW 3 kW kW
90 2 * 98
kW 4 kW kW
315 2 * 345
kW 15 kW kW
500 2 * 530
kW 15 kW kW
800 - 1500 kW 2 * 22 kW kW
billets
slabs
log ends
edgings
chipping rotor
Schwinge
case
clearing roll
knife
wear plate
wedge
release device
knife
traverse
counter knife
screen
counter knife wedge tension screw serrated end plate tension screw serrated end plate
counter knife
counter knife
feeding rolls1)
2.27 m
1.18 m
1.05 m
Fast and precise adjusting shorten mounting; thereby max. stability through tangential power. Vibration will be caught and therefore not transmitted into foundation. Usual construction style:
rail bolt
fine threaded stretched spindle due to flatten spindle thermic tensions as a result of welding disc
no counter bearing of the spindle end. Spindle will be squeezed out of middle axes
High quality chips due to optimal chipping geometry and improved material infeed
Feeding of the drum chipper possible with feeding belt, vibrating trough or steel plate belts
Transport of chips through screw conveyor, conveyer belt, chain conveyor or pneumatic
Spread worldwide and proved since decades for full satisfaction of our clients
Even, one-parted main shaft for fasten the rotor with tension elements
Lateral sealing of the front feeding roll carriers for dust protection
Trouble free infeed and secure locking of the material by two individual feeding rolls carriers
HeliCoil technology for optimal gripping power of screws; threads are replaceable
Contact
Ph.: +49 (6 71) 7 07-0 Fax: +49 (6 71) 7 07-67 P.O. Box 16 61 E-Mail: info@hombak.de D-55506 Bad Kreuznach Homepage: www.hombak.de