Documente Academic
Documente Profesional
Documente Cultură
http://www.keytometals.com/Print_new.aspx?id=ChemCrt&LN=PT&...
1045
SAE USA Os aos estruturais e de construo
SAE J 1397 (1992) Estimated mechanical properties and machinability of steel bars Chemical composition according to SAE J 403. Average machinability rating (for cold drawn): 55%, (for annealed cold drawn): 65%.
Composio qumica
Composio qumica (%)
Critrio C Mn P S Si (*) Cu (*) B (*) Pb (*) 0.1000 0.2000 0.0005 0.1000 0.0030 0.3500 Min. 0.4300 0.6000 Max. 0.5000 0.9000 0.0400 0.0500 0.2500 Pb Aproximado Critrio Si Cu B Comentrio or 0,15 < Si <= 0,35% When required When required, the letter B can be inserted. When required, the letter L can be inserted.
1 de 1
30/07/2012 20:11
http://www.keytometals.com/Print_new.aspx?id=Mechanic&LN=PT&...
1045
SAE USA Os aos estruturais e de construo
SAE J 1397 (1992) Estimated mechanical properties and machinability of steel bars Chemical composition according to SAE J 403. Average machinability rating (for cold drawn): 55%, (for annealed cold drawn): 65%.
Propriedades Mecnicas
Unidades de medida: Mtrico (SI) Anglo-Saxnico
Min. Bars; Hot rolled; 20 < d <= 30 mm (length: 50 mm) Limite de escoamento R
p0,2
Max.
Aproximado
(MPa)
HB max 163
(MPa)
HB max 179
Bars; Annealed cold drawn; 20 < d <= 30 mm (length: 50 mm) Limite de escoamento R
p0,2
(MPa)
HB max 170
1 de 1
30/07/2012 20:11
http://www.keytometals.com/Print_new.aspx?id=HeatTreatment&LN...
1045
SAE USA Os aos estruturais e de construo
SAE J 1397 (1992) Estimated mechanical properties and machinability of steel bars Chemical composition according to SAE J 403. Average machinability rating (for cold drawn): 55%, (for annealed cold drawn): 65%.
Tratamento trmico
1 de 3
30/07/2012 20:12
http://www.keytometals.com/Print_new.aspx?id=HeatTreatment&LN...
Hardness-Tempering
TTT
2 de 3
30/07/2012 20:12
http://www.keytometals.com/Print_new.aspx?id=HeatTreatment&LN...
CCT
3 de 3
30/07/2012 20:12
http://www.keytometals.com/Print_new.aspx?id=StressStrain&LN=P...
1045
SAE USA Os aos estruturais e de construo
SAE J 1397 (1992) Estimated mechanical properties and machinability of steel bars Chemical composition according to SAE J 403. Average machinability rating (for cold drawn): 55%, (for annealed cold drawn): 65%.
Diagramas Tenso-Deformao
Unidades de medida: Selecione a condio: Mtrico (SI) Anglo-Saxnico
1: Forged bars; Strain rate (%/min): 1.8; Hardness (HB): 260; 100 % rel. atmospheric humidity; Direction: L (tensile)
Condio: Forged bars; Strain rate (%/min): 1.8; Hardness (HB): 260; 100 % rel. atmospheric humidity; Direction: L (tensile) Comentrio: Stress strain data originating from tensile testing
True Stress - Strain Engineering Stress - Strain
Esforo / Deformao 0 0.002 0.005 0.01 0.015 0.02 0.025 0.03 0.035 0.04 0.045 0.05 Tenso Interna (MPa) 0 354 538 653 718 764 801 832 858 881 902 920
1 de 3
30/07/2012 20:13
http://www.keytometals.com/Print_new.aspx?id=StressStrain&LN=P...
Esforo / Deformao 0 0.002 0.005 0.01 0.015 0.02 0.025 0.03 0.035 0.04 0.045 0.05
Tenso Interna (MPa) 0 353 535 647 707 749 781 807 828 846 862 875
Fatigue Considerations in Use of Aluminum Alloys / M.R. Mitchel, M.E. Meyer, N.Q. Nguyen / Proceedings of the SAE Fatigue Conference, Dearborn, Michigan / 1982 / pp. 249-272
1 2 3 4
Fatigue Considerations in Use of Aluminum Alloys / M.R. Mitchel, M.E. Meyer, N.Q. Nguyen / Proceedings of the SAE Fatigue Conference, Dearborn, Michigan / 1982 / pp. 249-272 Monotonic and Cyclic Properties of Engineering Materials / R. W. Landgraf, M. R. Mitchell, N. R LaPointe / Metallurgical Dept., Scientific Research Staff, Ford Motor Co., Dearborn, Michigan / 1972 Non published information Technical Report on Low Cycle Fatigue Properties Ferrous and Non-Ferrous of Materials, SAE J1099 / Society of Automotive Engineers, Inc., Warrendale, Pa. / 2002
Referncia cruzada
Tabela de Referncia
Propriedades
Composio Propriedades Mecnicas Propriedades Fsicas * Temperaturas Elevadas * Usinabilidade Tratamento trmico Metalografia * Carbono equivalente
Fornecedores (beta)
2 de 3
30/07/2012 20:13
http://www.keytometals.com/Print_new.aspx?id=StressStrain&LN=P...
Extended Range
Diagramas Tenso-Deformao Fluxo de Tenso-Deformao Dados da fadiga Fratura mecnica Dados sobre a fluncia
3 de 3
30/07/2012 20:13
http://www.keytometals.com/Print_new.aspx?id=FlowStressFlowStra...
1045
SAE USA Os aos estruturais e de construo
SAE J 1397 (1992) Estimated mechanical properties and machinability of steel bars Chemical composition according to SAE J 403. Average machinability rating (for cold drawn): 55%, (for annealed cold drawn): 65%.
Fluxo de Tenso-Deformao
Unidades de medida: Selecione a condio: Mtrico (SI) Anglo-Saxnico
1: Strain rate range (1/sec): 0.5 - 30; Temperature [C]: 1000; Chem. composition: C (%): 0.46; Si (%): 0.29; Mn (%): 0.73; P (%): 0.018; S (%):
Condio: Strain rate range (1/sec): 0.5 - 30; Temperature [C]: 1000; Chem. composition: C (%): 0.46; Si (%): 0.29; Mn (%): 0.73; P (%): 0.018; S (%): 0.021; Cr (%): 0.08; Mo (%): 0.01; Ni (%): 0.04
True Stress - Strain Engineering Stress - Strain
Selecione a Temperatura:
1000C
Digita taxa de deformao (1/s):
0.5
(entre 0.5 and 30 )
Calcular
Esforo / Deformao 0.05 0.1 0.2 0.3 0.4 Tenso Interna (MPa) 98 121 146 157 155
1 de 2
30/07/2012 20:13
http://www.keytometals.com/Print_new.aspx?id=FlowStressFlowStra...
Selecione a Temperatura:
1000C
Digita taxa de deformao (1/s):
0.5
(entre 0.5 and 30 )
Calcular
Esforo / Deformao 0.05 0.1 0.2 0.3 0.4 Tenso Interna (MPa) 93 109 119 116 104
Calculation of flow stress in warmforming with the help of coefficients / R. Hinkforth and H. D. Konig / 1967
1 2
Calculation of flow stress in warmforming with the help of coefficients / R. Hinkforth and H. D. Konig / 1967 Flow curves of carbon and alloy steels / S. Schwandt / 1968 / p. 366
2 de 2
30/07/2012 20:13
http://www.keytometals.com/Print_new.aspx?id=FatigueData&LN=P...
1045
SAE USA Os aos estruturais e de construo
SAE J 1397 (1992) Estimated mechanical properties and machinability of steel bars Chemical composition according to SAE J 403. Average machinability rating (for cold drawn): 55%, (for annealed cold drawn): 65%.
Dados da fadiga
Unidades de medida: Mtrico (SI) Anglo-Saxnico
Parmetros de deformao
Selecione a condio:
1728
Amplitude de deformao :
Reverses s falhas, 2Nf 1E1 1E2 1E3 1E4 1E5 1E6 1E7
Comentrio:
1 de 3
30/07/2012 20:14
http://www.keytometals.com/Print_new.aspx?id=FatigueData&LN=P...
rompimento, s .
f
Expoente de comprimento da fadiga, b varia de -0,05 at -0,12 para a maioria dos metais dentro de uma mdia de -0,085. Coeficiente de ductibilidade da fadiga, e '
f
Expoente de ductibilidade da fadiga, c Expoente de ductibilidade da fadiga, c no to bem definido como outros parmetros. Coffin constatou que c is aproximadamente -0,5; Manson encontrou aproximadamente -0,6; de acordo com Morrow, c vria entre -0,5 e -0,7. Uma regra de aproximao deve ser seguida ao invz de uma equao emprica. Coeficiente de Resistncia ciclco, K' K' = s ' / (e ' )
f f n'
e = ln (1 / (1 - RA))
f
Technical Report on Low Cycle Fatigue Properties Ferrous and Non-Ferrous of Materials, SAE J1099 / Society of Automotive Engineers, Inc., Warrendale, Pa. / 2002
1 2 3 4 5 6
Crack initiation fatigue-data analysis, trends and estimation / B. E. Boardman / Proceedings of the SAE Fatigue Conference. Fatigue conference and exposition, Dearborn, MI, Warrendale / 1982 / pp. 5973 Fatigue Considerations in Use of Aluminum Alloys / M.R. Mitchel, M.E. Meyer, N.Q. Nguyen / Proceedings of the SAE Fatigue Conference, Dearborn, Michigan / 1982 / pp. 249-272 Materials Data For Cyclic Loading / Chr. Boller, T. Seeger / Amsterdam [etc.] : Elsevier / 1987 Monotonic and Cyclic Properties of Engineering Materials / R. W. Landgraf, M. R. Mitchell, N. R LaPointe / Metallurgical Dept., Scientific Research Staff, Ford Motor Co., Dearborn, Michigan / 1972 Non published information Technical Report on Low Cycle Fatigue Properties Ferrous and Non-Ferrous of Materials, SAE J1099 / Society of Automotive Engineers, Inc., Warrendale, Pa. / 2002
Parmetros de tenso
Selecione a condio:
724
Technical Report on Low Cycle Fatigue Properties Ferrous and Non-Ferrous of Materials, SAE J1099 / Society of Automotive Engineers, Inc., Warrendale, Pa. / 2002
Crack initiation fatigue-data analysis, trends and estimation / B. E. Boardman / Proceedings of the SAE Fatigue Conference. Fatigue conference and exposition, Dearborn, MI, Warrendale / 1982 / pp. 5973
2 de 3
30/07/2012 20:14
http://www.keytometals.com/Print_new.aspx?id=FatigueData&LN=P...
2 3 4 5 6
Fatigue Considerations in Use of Aluminum Alloys / M.R. Mitchel, M.E. Meyer, N.Q. Nguyen / Proceedings of the SAE Fatigue Conference, Dearborn, Michigan / 1982 / pp. 249-272 Materials Data For Cyclic Loading / Chr. Boller, T. Seeger / Amsterdam [etc.] : Elsevier / 1987 Monotonic and Cyclic Properties of Engineering Materials / R. W. Landgraf, M. R. Mitchell, N. R LaPointe / Metallurgical Dept., Scientific Research Staff, Ford Motor Co., Dearborn, Michigan / 1972 Non published information Technical Report on Low Cycle Fatigue Properties Ferrous and Non-Ferrous of Materials, SAE J1099 / Society of Automotive Engineers, Inc., Warrendale, Pa. / 2002
3 de 3
30/07/2012 20:14
http://www.keytometals.com/Print_new.aspx?id=FractureMechanics...
1045
SAE USA Os aos estruturais e de construo
SAE J 1397 (1992) Estimated mechanical properties and machinability of steel bars Chemical composition according to SAE J 403. Average machinability rating (for cold drawn): 55%, (for annealed cold drawn): 65%.
Fratura mecnica
Selecione a condio:
1: Hardened; Specimen: thicknes: 11.303 mm, width: 45.72 mm; R: 0.023; Rp0,2 [MPa]: 552; Rm [MPa]: 862; Direo: L
Condio: Hardened; Specimen: thicknes: 11.303 mm, width: 45.72 mm; R: 0.023; Rp0,2 [MPa]: 552; Rm [MPa]: 862; Direo: L Propriedades Monotnica: Limite de escoamento: 552 MPa; Resistncia trao: 862 MPa Temperatura 20 Direo L R 0.023 K
IC
[MPa vm] -
Collection, Processing, and Reporting of Damage Tolerant Design Data for Non-Aerospace Structural Materials / P.D. Huber, J.P. Gallagher / University of Dayton Research Institute, Dayton / 1994 / Report UDR-TR-94-88
1 de 2
30/07/2012 20:15
http://www.keytometals.com/Print_new.aspx?id=FractureMechanics...
R EF ER NC IA
1 2
Collection, Processing, and Reporting of Damage Tolerant Design Data for Non-Aerospace Structural Materials / P.D. Huber, J.P. Gallagher / University of Dayton Research Institute, Dayton / 1994 / Report UDR-TR-94-88 Plane-Strain Fracture Toughness Data Handbook for Metals / T.W. Matthews / National Technical Information Service (NTIS) / 1973
Referncia cruzada
Tabela de Referncia
Propriedades
Composio Propriedades Mecnicas Propriedades Fsicas * Temperaturas Elevadas * Usinabilidade Tratamento trmico Metalografia * Carbono equivalente
Fornecedores (beta)
Fornecedores Diretos Fornecedores Alternativos
Extended Range
Diagramas Tenso-Deformao Fluxo de Tenso-Deformao Dados da fadiga Fratura mecnica Dados sobre a fluncia
2 de 2
30/07/2012 20:15