Documente Academic
Documente Profesional
Documente Cultură
Client
Pn. Siti Hasnah
Lecturer
Mr. Liau Chung Fan
When we are design a product and sell to customer, there are some issues
have to take into consideration such as product lifecycle management, protection of
intellectual property, environmental issues, product liability, product safety and
universal design principles. All this issues is important to ensure unfavorable
incidents will be avoided, product liability which held responsible for the injuries
those product cause and so on.
Digital clock with remote control is a wall clock that can be use in class or
office. This clock was built with real time clock with AM/FM or 24-hours indicator
plus calendar and day functions. It also has special features such as the wireless
remote control to set the time and date. This clock is very user friendly and very
useful. The lifecycle management of the digital clock for classroom product has four
phases. Conceive, design, realize and service.
The first phase is conceived. It is the definition of its requirements based on
customer, company, market and regulatory bodies’ viewpoints. From the first
proposal, the client had required to build a digital clock for classroom with additional
features such as calendar, stopwatch, countdown timer and remote control. However,
facing with a few constraints, the final specification for this product is a digital clock
with calendar and wireless remote control. The clock is displayed with LCD display
that can be set with remote control wirelessly. The specialty of this product is it was
control by a wireless remote. The market research shows that the digital clock that
uses wireless remote control is still too few in market. The price rate is still around
$250 to $300 in foreign country.
The design and development start at second phase. From the first
development, the digital clock was programmed using assembly, but there is a lot of
problem facing using assembly language because it is too long and complicate when
writing the code. Therefore, the product is redesign and improved using C
programming. The wireless remote control is using radio frequency to set the time on
the digital clock. The model also designed in this phase. This is where the detailed
design and development of the products form starts, progressing to prototype testing,
through pilot release to full product launch. It can also involve redesign and ramp for
improvement to existing products as well as planned obsolescence.
The third phase is realized where the digital clock was make, build,
procure and produce. The digital clock is built on a PCB board. Then, the
manufacturing is planning to produce, sells and delivers the product. After the
product is complete and the method of manufacturing is defined, the digital clock
is build, test and analyze to finalize the product and manufacture it. Once the
component is manufacture, the size and form can be checked using computer-
aided design. Parallel to the engineering tasks, sales product configuration and
marketing documentation work will be taking place.
The last phase is service. This phase involve managing off in service
information. This is where the product is selling to customer and it provides
customers and service engineers with support information for repair and
maintenance, as well as waste management or recycling information. This phase
will make the digital clock a marketable set of products and services capable of
jointly fulfilling a user's needs.
The product lifecycle management is more to managing description and
properties of product through its development and usefulness. The benefit of
documenting the product lifecycle is it can improve the product quality. The
digital clock can be improved and redesign if there has some lacking or weakness.
This management also reduced the cost of prototyping and reduced time to market
this product.
The product lifecycle management also includes the recycle or disposal of
the product. This is important because it helps to reduce the rubbish all around
and slow down the global warming. Our digital clock with remote control is form
by different type of electronic component. Some of the components are recyclable
and some of the components are disposal. Components such as LED, LCD is
recyclable, crystal oscillator, button switch, resistor, capacitors, wires are subject
to disposal.
8. UNIVERSAL DESIGN PRINCIPLE
9. SAFETY ISSUES
In this project design, we could not make our product follow the product
life cycle as efficiently as we stated. However, our objective of this project design
is to achieve so feature that required by our customer. This leaves us for
improvement for some feature if future resources permit it.
Our digital clock can be improves by adding more feature into it. For
example, feature like stopwatch, countdown timer, alarm, temperature, and so on.
With more feature of the digital clock, the market of buying our digital clock will
be increase. This is because our digital clock not just for display the time and
calendar, it also can use to do experiment (stopwatch), as a reminder as the time
countdown (alarm or countdown), knowing the room temperature so that they can
adjust the air –condition and so on. Future more, we can put musical function with
various music songs inside the digital clock so that customer can choose any song
as their alarm that they like. This will attract more customers to buy it. Besides
that, auto update function should include inside the digital clock. This is
important so that people will not be late just because of the time is not update or
have some delay. Casing with some good qualities include waterproof and hard
material can be use to build the casing of the digital clock and remote control.
11. REFERENCE
a. http://www.product-lifecycle-management.com//
b. http://en.wikipedia.org/wiki
c. http://www.cytron.com.my