Documente Academic
Documente Profesional
Documente Cultură
Crawler Loader
Travel Control
1 joystick lever ____________________ with servo-control for all travel
functions: travel direction, speed,
steering and counter-rotation
Low speed range __________________ for difficult applications the maxi-
mum travel speed can be limited
to 4 km/h (2.5 mph)
Engine speed sensing
control ________________________________ the engine speed sensing control
assures constant balance between
traction and travel speed guarantees
Refill Capacities
maximum utilization of available Fuel tank __________________________________________________________________ 350 l (92 gal)
engine horsepower and protects the Cooling system __________________________________________________________ 39 l (10 gal)
Diesel engine from overload Engine oil __________________________________________________________________ 22 l (3.2 gal)
Safety lever ________________________ inactivates complete travel and Splitterbox ________________________________________________________________ 3,5 l (0.9 gal)
working hydraulic circuit and auto- Hydraulic tank __________________________________________________________ 165 l (44 gal)
matically activates parking brake Final drive, each __________________________________________________________ 31 l (8 gal)
Technical Data
2
Basic Machine
Dimensions ft-in/mm
C Height over ca 11’2”/3415
D Height over exhaust pipe 11’2”/3400
Q Ground clearance 1’6”/ 455
F Overall length without attachment 16’8”/5065
L Distance idler/sprocket center 9’7”/2930
M Crawler length 13’3”/4040
W Track gauge 6’5”/1950
N Width of trackpads 18”/ 457
20”/ 508
22”/ 560
26”/ 660
Dimensions
3
Standard Bucket
Dimensions ft-in/mm
E Overall length 23’1”/6975
H Dumping height at 45° 10’6”/3200
I Reach at 45° 4’2”/1270
K Max. digging depth below grade 5”/125
U Overall height 18’7”/5675
T Max. height of hinge pin 13’9”/4180
T1 Height of hinge pin, transport position 1’10”/555
W Width of bucket 9’0”/2750
Attachments
4
Multi-purpose Bucket
Dimensions ft-in/mm
E Overall length 23’5”/7115
H Dumping height at 45° (bucket) 10’2”/3090
H1 Dumping height at 45° (blade) 11’11”/3630
I Reach at 45° (bucket) 4’1”/1250
I1 Reach at 45° (blade) 2’5”/735
K Max. digging depth below grade 81 ⁄ 2”/220
U Overall height 18’7”/5660
U1 Overall height 20’10”/6355
T Max. height of hinge pin 1’9”/4180
T1 Max. height of hinge pin, transport position 1’10”/555
V Width of opening 4’7”/1405
W Width of bucket 9’0”/2750
5
Ripper
Dimensions ft-in/mm
D Ground clearance below toolbar 111 ⁄ 2”/290
F Ripping width 6’5”/1960
G Toolbar width 7’5”/2250
H Lifting height 2’9”/830
K Ripping depth 1’4”/405
M Overall length attachment raised 7’2”/2195
M1 Overall length attachment, teeth angled in 6’1”/1860
N Overall length attachment lowered 6’11”/2105
W Distance between teeth 3’1”/950
X Angle 17°
X1 Angle, teeth angled in 22°
Weight lbs/kg
Ripper complete 4,500/2050
Attachments
6
Standard Equipment* Optional Equipment
Diesel Engine: x Perforated engine side covers
x Fuel system with pre-filter, water separator and fine x Backup alarm
filters x Air conditioner
x Dry-type air cleaner with main and safety element x Cab protection screens
x Alternator, 27 Amp x Power adjustable, air suspension seat
x Starter motor 6.5 kW/8.8 hp x Electric fuel pump
x Electrically activated battery master switch x Full length track guard
x Two HD cold start batteries – 110 Ah x Track guide, center
x Final drive protection
Track Components: x Extra hydraulic controls
x Maintenance-free track components, sealed and x Hydraulic winch
lubricated rollers, idlers and sprockets x Swinging drawbar
x Segmented, bolted sprocket rims x Remote radio control
x Landfill package
Travel Drive: x Forestry package
x Hydrostatic drive with hydraulic control x Steel mill package
x Automatic parking brake x Special paint, one or two tone
x Special buckets
Attachment Hydraulics:
x 3-spool control block Other optional items on request
x Electrical switches for lift stop, bucket positioning
and bucket-float
x Z-bar linkage
Operator’s Compartment:
x Cab with integrated ROPS/FOPS, hot water heater,
pressurized and filtered ventilation
x Fully adjustable suspension seat with seatbelt
x Windshield wipers front and rear
x Windshield washer system
x Dome light, rear view mirror, sun shade
x Preparation kit to install fire extinguisher and
beacon
x Safety glass
x Tinted glass
x Lockable doors
x Two front and two rear working lights
x Lighted instrument panel with engine oil pressure
and engine coolant temperature gauge, hour meter
and fuel gauge
Basic Machine:
x Tool kit
x Rear drawbar hitch
x Lockable engine side doors
x Homuligation kit for european standards
LIEBHERR-WERK TELFS GMBH, Hans-Liebherr-Straße 35, A-6410 Telfs, ç (0 52 62) 6 00, Fax (0 52 62) 6 00 72
www.liebherr.com, e-Mail: info@lwt.liebherr.com
With compliments: