Documente Academic
Documente Profesional
Documente Cultură
Catal og N umb er T B V- 10 0 1
TABLE OF CONTENTS
Standard Features
4 6 8
Standar d Product s
Trunnion Valves Pressure/Temperature Charts Terms and Conditions of Sale Return Goods Policy and Warranty
9 20 21 22
Standard Features
T r u n n i o n B a l l V a lv e 2 "
to
1 6 " C l a ss 1 5 0 - 2 5 0 0
The GWC forged body trunnion mounted ball valves are designed, constructed and tested according to API-6D. The full range of GWC Trunnion Ball Valves are supplied standard in full compliance with NACE MR-01-75. GWC ball valves have been developed for oil and gas pipelines, and process industry use according to API-6D standards.
GWC forged body standard trunnion mounted ball valves are furnished with the following fire-safe materials: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. Body Cap Seat Ring Seat Spring Plate Ball Gland Stem Adaptor Plate Trunnion Key Body Fire-Proof Gasket Seat Fire-Proof Gasket Gland Fire-Proof Gasket Trunnion Fire-Proof Gasket Graphite Stem Seal Thrust Washer Trunnion Gasket Bearing Bearing Stem O-Ring 22. 23. 24. 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. 38. Gland O-Ring Body O-Ring Seat O-Ring Trunnion O-Ring Anti-Static Spring And Ball Anti-Static Spring Spring Pin Screw Screw (Not shown) Screw Burried Check Vent Valve (Not shown) Drain Valve Stem Injection Stud Nut
Note: 6" and above: Seat Injection & Buried Check are standard and are not shown.
Standard Features
T r u n n i o n B a l l V a lv e 1 8 "
The GWC forged body trunnion mounted ball valves are designed, constructed and tested according to API-6D. The full range of GWC Trunnion Ball Valves are supplied standard in full compliance with NACE MR-01-75. GWC ball valves have been developed for oil and gas pipelines, and process industry use according to API-6D standards.
and
A b o v e C l a ss 1 5 0
to
2500
GWC forged body standard trunnion mounted ball valves are furnished with the following fire-safe materials: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. Body Cap Seat Ring Seat Spring Plate Ball Gland Stem Adaptor Plate Bearing Plate Key Body Fire-Proof Gasket Seat Fire-Proof Gasket Gland Fire-Proof Gasket Graphite Stem Seal Thrust Washer Ball Thrust Bearing Bearing Screw Screw Key Screw 25. 26. 27. 28. 29. 30. 31. 32. 33. 34. 35. 36. 37. Body O-Ring Gland O-Ring Stem O-Ring Pin Spring Anti-Static Spring And Ball Drain Valve Vent Valve (Not shown) Buried Check Stem Injection Seat Injection (Not shown) Stud Nut
Standard Features
C a s t B o dy Tr u n n i o n s
GWC cast body standard trunnion valves are furnished with the following fire-safe materials: 1. Body 2. Cap 3. Seat Ring 4. Seat Inserts 5. Seat Spring 6. Ball 7. Gland Flange 8. Gland Bush 9. Stem 10. Trunnion 11. Key 12. Ball Joint Key 13. Body Fire-Proof Gasket 14. Seat Fire-Proof Gasket 15. Gland Fire-Proof Gasket 16. Trunnion Fire-Proof Gasket 17. Gland Bush Fire-Proof Gasket 18. Graphite Stem Seal 19. Stem Thrust Washer 20. Trunnion Thrust Washer 21. Bearing 22. Bearing 23. Stem O-Ring 24. Gland O-Ring 25. Body O-Ring 26. Seat O-Ring 27. Seat O-Ring 28. Trunnion O-Ring 29. Anti-Static Spring And Ball 30. Spring 31. Pin 32. Screw 33. Screw 34. Buried Check 35. Drain & Vent Valve 36. Stem Injection 37. Stud 38. Nut 39. Stop Ring Note: 6 and above - Seat Injection and Buried Check are standard and are not shown.
GWC cast body trunnion mounted b a l l v a l v e s a re d e s i g n e d , constructed and tested according to API-6D. The full range of GWC Trunnion Ball Valves are supplied standard in full compliance with NACE MR-01-75. GWC ball valves have been developed for oil and gas pipelines, and process industry use according to API-6D standards.
Bleed
Vent Valve
Drain Valve
S e a l i n g F e at u r e
All Trunnion ball valves utilize the differential between the sealing diameter of the seat insert/ball contact and the outer diameter of the seat. The difference between these areas times the line pressure is the sealing force. When line pressure is so low that the force generated by the different diameters cannot seal, the seat springs provide the force. (Figure 2) Figure 2 Upstream Downstream
F i r e S a f e D e s i g n F e at u r e
GWC Trunnion Ball valves are designed with a secondary metal-to-metal seal after a fire. When the primary soft seals are destroyed by fire, the fire-safe seals energize the seat assembly to seal. The differential seat area energized by line pressure with the spring force loads the seat into the ball. All GWC Model FF and GG Trunnion Mounted ball valves have been tested to API-607/API-6FA. (Figure 3) Figure 3
I n j e c t i o n S e a l a n t F e at u r e
The full range of Trunnion Ball Valves are supplied with a standard anit-blow out stem and stem sealant injection fitting. Seat sealant fittings are also standard on the 6 and larger valves. These sealant fittings can be used to provide a temporary seal in the event of damage incurred from fire or line media contamination. (Figure 4) Figure 4
Ordering Guide
Example: 12 Figure # FF600-1-CF-E2-GO
FF 60 0
1. 2. 3.
1
4.
CF
5.
E 2
6. 7.
GO
8.
12 CLASS 600 TRUNNION BALL VALVE, FLG-RF, FULL BORE, A105 BODY x A105 + ENP TRIM, DEVLON SEAT INSERTS, Viton-B, O-RINGS, NACE, FIRESAFE, GEAR OP.
1. MODEL
F - TRUNNION BALL, 2 PIECE, SPLIT BODY, FULL BORE G - TRUNNION BALL, 2 PIECE, SPLIT BODY, REDUCED BORE FF - TRUNNION BALL, 3 PIECE, SPLIT BODY, FULL BORE GG - TRUNNION BALL, 3 PIECE, SPLIT BODY, REDUCED BORE FT - TRUNNION BALL, 1 PIECE, TOP ENTRY, FULL BORE GT - TRUNNION BALL, 1 PIECE, TOP ENTRY, REDUCED BORE FW - TRUNNION BALL, FULLY WELDED BODY, FULL BORE GW - TRUNNION BALL, FULLY WELDED BODY, REDUCED BORE
2. RATING
15 30 60 90 - - - - CLASS 150 CLASS 300 CLASS 600 CLASS 900 150 250 300 500 - - - - CLASS 1500 CLASS 2500 API 3000 API 5000
3. END CONNECTION
0 - RF FLANGED 7 - BUTTWELD (SCHEDULE REQUIRED) 9 - RING JOINT X - SPECIAL
4. TYPE
1 - FIRE-SAFE
6. MATERIAL (SEAT)
G - RTFE B - NYLON E - DEVLON V - PEEK J - DELRIN M - METAL X - SPECIAL
8. OPERATOR
L - HANDWHEEL OPERATOR GO - WORM GEAR OPERATOR B - BARE STEM
9. SPECIAL REQUIREMENTS
EB - EXTENDED BONNET S - SUPPLY COMPLETE INFORMATION
S ta n d a r d M at e r i a l s
F150-1-LC-G2, G150-1-LC-G2 FF150-1-LC-G2, GG150-1-LC-G2
Ball A105N*
Dimensions in inches
Valve Size Bore Size (d) Face to Face (A)
RF BWE
C l a s s 150 F u l l B o r e
3 80mm 3.00 8.00 11.13 15.55 94 4 100mm 4.00 9.00 12.00 15.55 18.11 158 6 150mm 6.00 15.50 18.00 25.23 18.11 287 8 200mm 8.00 18.00 20.50 18.11 440 10 250mm 10.00 21.00 22.00 24.00 678 12 250mm 12.00 24.00 25.00 24.00 989 14 350mm 13.25 27.00 30.00 24.00 1346 16 400mm 15.25 30.00 33.00 24.00 1813 18 450mm 17.25 34.00 36.00 24.00 2526 20 500mm 19.25 36.00 39.00 28.00 3165 24 600mm 23.25 42.00
28.00 5450
C l a s s 150 R e d u c e d B o r e
14 350mm 10.00 27.00 16 400mm 12.00 30.00 18 450mm 13.25 34.00 20 500mm 15.25 36.00 24 600mm 19.25 42.00
11.13
14.76 54
12.00
15.55 111
18.00
15.55 18.11 179
20.50
25.23 18.11 331
22.00
18.11 510
25.00
24.00 818
30.00
24.00 1094
33.00
24.00 1461
36.00
24.00 1901
39.00
24.00 2285
45.00
28.00 3605
45.00
S ta n d a r d M at e r i a l s
Figure Number: 2-Piece F300-1-CC-G2, G300-1-CC-G2 Figure Number: 3-Piece FF300-1-CC-G2, GG300-1-CC-G2
Ball A105N*
O-Rings Viton-B
C l a s s 300
Valve Size Bore Size (d) Face to Face (A)
RF BWE
Full Bore
2
50mm
Dimensions in inches
6
150mm
3
80mm
4
100mm
8
200mm
10
250mm
12
250mm
14
350mm
16
400mm
18
450mm
20
500mm
24
600mm
C l a s s 300
Valve Size Bore Size (d) Face to Face (A) RF BWE
Reduced Bore
3
80mm
Dimensions in inches
10
250mm
4
100mm
6
150mm
8
200mm
12
250mm
14
350mm
16
400mm
18
450mm
20
500mm
24
600mm
10.00
12.00
13.25
15.25
19.25
S ta n d a r d M at e r i a l s
F600-1-LC-E2, G600-1-LC-E2 FF600-1-LC-E2, GG600-1-LC-E2
FF600-1-BC-E2, GG600-1-BC-E2
A216 WCB A182 F316 A182 F316 A182 F316 + Devlon V Viton-B
A351 CF8M A182 F316 A182 F316 A182 F316 + Devlon V Viton-B
Dimensions in inches
Valve Size Bore Size (d) RF Face to Face (A) RTJ BWE Handle Length (C) Handwheel Diameter (F) Approx. Weight (lbs.) 2 50mm 2.00 11.50 11.63 11.50 19.69 11.80 58 3 80mm 3.00 14.00 14.13 14.00 25.39 18.11 113 4 100mm 4.00 17.00 17.13 17.00 33.46 18.11 179 6 150mm 6.00 22.00 22.13 22.00 24.00 455 8 200mm 8.00 26.00 26.13 26.00 24.00 880 10 250mm 10.00 31.00 31.13 31.00 24.00 1316
C l a s s 600 F u l l B o r e
12 250mm 12.00 33.00 33.13 33.00 28.00 2253 14 350mm 13.25 35.00 35.13 35.00 28.00 2688 16 400mm 15.25 39.00 39.13 39.00 28.00 3000 18 450mm 17.25 43.00 43.13 43.00 28.00 4083 20 500mm 19.25 47.00 47.25 47.00 30.00 4875 24 600mm 23.25 55.00 55.38
30.00 8006
Dimensions in inches
Valve Size Bore Size (d) RF Face to Face (A) RTJ BWE Handle Length (C) Handwheel Diameter (F) Approx. Weight (lbs.) 3 80mm 2.00 14.00 14.13 14.00 19.69 11.80 70 4 100mm 3.00 17.00 17.13 17.00 25.39 18.11 141 6 150mm 4.00 22.00 22.13 22.00 33.46 18.11 270 8 200mm 6.00 26.00 26.13 26.00 24.00 510 10 250mm 8.00 31.00 31.13 31.00 24.00 962 12 250mm 10.00 33.00 33.13 33.00 24.00 1426
C l a s s 600 R e d u c e d B o r e
14 350mm 10.00 35.00 35.13 35.00 28.00 2006 16 400mm 12.00 39.00 39.13 39.00 28.00 2302 18 450mm 13.25 43.00 43.13 43.00 28.00 2960 20 500mm 15.25 47.00 47.25 47.00 28.00 4183 24 600mm 19.25 55.00 55.38 55.00 30.00 5720
55.00
S ta n d a r d M at e r i a l s
Figure Number
Body/Cap Stem
A182 F316 A182 F316 A182 F316 + RTFE * Electroless Nickel Plating .003
C l a s s 150
Valve Size Bore Size (d) Face to Face (A)
RF BWE
Full Bore
3
80mm
Dimensions in inches
8 10
250mm
2
50mm
4
100mm
6
150mm
12
250mm
14
350mm
16
400mm
18
450mm
20
500mm
24
600mm
30
750mm
36
900mm
40
mm
42
mm
48
mm
200mm
* * * * * *
* * * * * *
* * * * * *
* Available on request.
C l a s s 150
Valve Size Bore Size (d) Face to Face (A) RF BWE
Reduced Bore
3
80mm
Dimensions in inches
10 12
250mm
4
100mm
6
150mm
8
200mm
14
350mm
16
400mm
18
450mm
20
500mm
24
600mm
30
750mm
36
900mm
250mm
10.00
27.00 30.00 24.00 1368
12.00
30.00 33.00 24.00 1826
13.25
34.00 36.00 24.00 2376
15.25
36.00 39.00 24.00 2856
19.25
42.00 45.00 28.00 4506
12
S ta n d a r d M at e r i a l s
FF300-1-LF-G2, GG300-1-LF-G2
FF300-1-BF-G2, GG300-1-BF-G2
Body/Cap A105N A105N A182 F316 Ball A105N* Stem AISI 4140* Seats & Inserts ASTM A105N* + RTFE * Electroless Nickel Plating .003 A182 F316 A182 F316 A182 F316 + RTFE A182 F316 A182 F316 A182 F316 + RTFE
Dimensions in inches
Valve Size Bore Size (d) Face to Face (A)
RF BWE
C l a s s 300 F u l l B o r e
3
80mm
2
50mm
4
100mm
6
150mm
8
200mm
10
250mm
12
250mm
14
350mm
16
400mm
18
450mm
20
500mm
24
600mm
30
750mm
36
900mm
40
mm
42
mm
48
mm
* * * * * *
* * * * * *
* * * * * *
* Available on request.
Dimensions in inches
Valve Size Bore Size (d) Face to Face (A) RF BWE 3
80mm
C l a s s 300 R e d u c e d B o r e
4
100mm
6
150mm
8
200mm
10
250mm
12
250mm
14
350mm
16
400mm
18
450mm
20
500mm
24
600mm
30
750mm
36
900mm
10.00
30.00 30.00 24.00 1804
12.00
33.00 33.00 28.00 2486
13.25
36.00 36.00 28.00 3516
15.25
39.00 39.00 28.00 3953
19.25
45.00 45.00 28.00 5867
23.25
55.00 55.00 30.00 9878
29.00
68.00 68.00 30.00 18018
S ta n d a r d M at e r i a l s
Figure Number FF600-1-CF-E2, GG600-1-BF-E2
Body/Cap A105N A105N A182 F316 Ball Stem A105N* 4140* A182 F316 A182 F316 A182 F316 + Devlon V A182 F316 A182 F316 A182 F316 + Devlon V * Electroless Nickel Plating .003
C l a s s 600
Valve Size Bore Size (d) RF Face to Face (A) RTJ BWE 2
50mm
Full Bore
3
80mm
Dimensions in inches
10
250mm
4
100mm
6
150mm
8
200mm
12
250mm
14
350mm
16
400mm
18
450mm
20
500mm
24
600mm
30
750mm
36
900mm
40
mm
42
mm
48
mm
* * * * * * *
* * * * * * *
* * * * * * *
* Available on request.
C l a s s 600
Valve Size Bore Size (d) RF Face to Face (A) RTJ BWE Handle Length (C) Handwheel Diameter (F) Approx. Weight (lbs.)
Reduced Bore
3
80mm
Dimensions in inches
12
250mm
4
100mm
6
150mm
8
200mm
10
250mm
14
350mm
16
400mm
18
450mm
20
500mm
24
600mm
30
750mm
36
900mm
10.00
35.00 35.13 35.00 28.00 2508
12.00
39.00 39.13 39.00 28.00 2878
13.25
43.00 43.13 43.00 28.00 3700
15.25
47.00 47.25 47.00 28.00 5229
19.25
55.00 55.38 55.00 30.00 7150
23.25
65.00 65.50 65.00 30.00 12694
29.00
82.00 82.63 82.00 30.00 22836
14
S ta n d a r d M at e r i a l s
FF900-1-LF-E2, GG900-1-LF-E2
FF900-1-BF-E2, GG900-1-BF-E2
Seats & Inserts A105N* + Devlon V O-Rings Viton-B * Electroless Nickel Plating .003
Dimensions in inches
Valve Size Bore Size (d) RF Face to Face (A) RTJ BWE Handle Length (C) Handwheel Diameter (F) Approx. Weight (lbs.) 2
50mm
C l a s s 900 F u l l B o r e
3
80mm
4
100mm
6
150mm
8
200mm
10
250mm
12
250mm
14
350mm
16
400mm
18
450mm
20
500mm
24
600mm
30
750mm
36
900mm
28.11 70.08
* * *
70.08 -
* * *
26862
* Available on request.
Dimensions in inches
Valve Size Bore Size (d) RF Face to Face (A) RTJ BWE Handle Length (C) Handwheel Diameter (F) Approx. Weight (lbs.) 3
80mm
C l a s s 900 R e d u c e d B o r e
4
100mm
6
150mm
8
200mm
10
250mm
12
250mm
14
350mm
16
400mm
18
450mm
20
500mm
24
600mm
30
750mm
36
900mm
10.00
40.50 40.88 40.50 28.00 3615
12.00
44.50 44.88 44.50 28.00 3777
13.25
48.00 48.50 48.00 30.00 5361
15.25
52.00 52.50 52.00 30.00 6351
19.25
61.00 61.75 61.00 30.00 11880
*
* * * * * *
*
* * * * * *
S ta n d a r d M at e r i a l s
Figure Number FF1500-1-CF-E2, GG1500-1-CF-E2
A182 F316 A182 F316 17-4PH A182 F316 + Devlon V Viton-B * Electroless Nickel Plating .003
O-Rings Viton-B
C l a s s 1500
Valve Size Bore Size (d) RF Face to Face (A) RTJ BWE
Full Bore
2
50mm
Dimensions in inches
6 8
200mm
3
80mm
4
100mm
10
250mm
12
250mm
14
350mm
16
400mm
18
450mm
20
500mm
24
600mm
150mm
C l a s s 1500
Valve Size Bore Size (d) RF Face to Face (A) RTJ BWE Handle Length (C) Handwheel Diameter (F) Approx. Weight (lbs.)
Reduced Bore
3
80mm
Dimensions in inches
10
250mm
4
100mm
6
150mm
8
200mm
12
250mm
14
350mm
16
400mm
18
450mm
20
500mm
24
600mm
16
S ta n d a r d M at e r i a l s
FF2500-1-LF-E2, GG2500-1-LF-E2
FF2500-1-BF-E2, GG2500-1-BF-E2
Body/Cap A105N A105N A182 F316 Ball Stem A105N* 17-4 PH A182 F316 17-4 PH A182 F316 + Devlon V A182 F316 17-4 PH A182 F316 + Devlon V
Dimensions in inches
Valve Size Bore Size (d) RF Face to Face (A) RTJ BWE Handle Length (C) Handwheel Diameter (F) Approx. Weight (lbs.) 2 50mm 1.65 17.76 17.87 17.76 18.11 390 3 80mm 2.44 22.76 22.99 27.76 24.00 620 4 100mm 3.43 26.50 26.89 26.50 24.00 866 6 150mm 5.16 35.98 36.50 35.98 24.00 1518
C l a s s 2500 F u l l B o r e
8 200mm 7.05 40.24 40.82 40.24 30.00 2974 10 250mm 8.78 50.00 50.87 50.00 30.00 4994 12 250mm 10.43 55.98 56.89 55.98 30.00 7187
Dimensions in inches
Valve Size Bore Size (d) RF Face to Face (A) RTJ BWE Handle Length (C) Handwheel Diameter (F) Approx. Weight (lbs.) 3 80mm 2.05 22.76 22.99 22.76 18.11 400 4 100mm 2.44 26.50 26.89 26.50 24.00 601 6 150mm 3.43 35.98 36.50 35.98 24.00 1357
C l a s s 2500 R e d u c e d B o r e
8 200mm 5.16 40.24 40.87 40.24 24.00 2416 10 250mm 7.05 50.00 50.87 50.00 30.00 3667 12 250mm 8.78 55.98 56.89 55.98 30.00 5647
S ta n d a r d M at e r i a l s
Figure Number FF3009-1-CF-E2, GG3009-1-CF-E2
A182 F316 A182 F316 17-4 PH A182 F316 + Devlon V Viton-B * Electroless Nickel Plating .003
O-Rings Viton-B
API 3000 F u l l B o r e
Valve Size Bore Size (d) 2-1/16 51.6mm 2.06 RTJ 14.61 30.00 110 3-1/8 78.13mm 3.12 17.13 36.00 190 4-1/16 101.6mm 4.06 20.12 17.00 350
Dimensions in inches
5-1/8 128.1mm 5.12 24.13 20.00 550 7-1/16 176.6mm 7.06 28.11 24.00 950
API 3000 R e d u c e d B o r e
Valve Size Bore Size (d) Face to Face (A) Handle Length (C) Handwheel Diameter (F) Approx. Weight (Lbs.) RTJ 2-1/16 51.6mm 1.81 14.61 30.00 110
Dimensions in inches
3-1/8 78.13mm 2.06 17.13 36.00 190 4-1/16 101.6mm 3.12 20.12 17.00 350 7-1/16 176.6mm 5.12 24.13 20.00 750
18
S ta n d a r d M at e r i a l s
Figure Number FF5009-1-CF-E2, GG5009-1-CF-E2 FF5009-1-BF-E2, GG5009-1-BF-E2 FF5009-1-LF-E2, GG5009-1-LF-E2
Dimensions in inches
Valve Size Bore Size (d) Face to Face (A) Handle Length (C) Handwheel Diameter (F) Approx. Weight (Lbs.) RTJ 2-1/16 51.6mm 2.06 14.61 30.00 110 3-1/8 78.13mm 3.12 18.62 17.00 240 4-1/16 101.6mm 4.06 21.61 20.00 420
API 5000 F u l l B o r e
5-1/8 128.1mm 5.12 28.62 20.00 805 7-1/16 176.6mm 7.06
24.00 1,360
Dimensions in inches
Valve Size Bore Size (d) Face to Face (A) Handle Length (C) Handwheel Diameter (F) Approx. Weight (Lbs.) RTJ 2-1/16 51.6mm 1.81 14.61 30.00 110
API 5000 R e d u c e d B o r e
3-1/8 78.13mm 2.06 18.62 17.00 240 4-1/16 101.6mm 3.12 21.61 20.00 420 7-1/16 176.6mm 5.12 32.01 24.00 1,190
32.01
Pressure/temperature chart
M odel F, FF, G & GG T runnion B all V alve
The following chart indicates the pressure and temperature ratings for commonly used seat insert plastic and elastomer seal material used in GWC trunnion mounted ball valves. Other materials are available upon request.
Claims
All claims for shortages, corrections, or deductions must be made within 10 days after receipt of goods. Responsibility for goods lost or damaged in transit rests with carrier, and claims should be filed with the carrier by the consignee. Delivery of material to a common carrier shall be considered delivery to the buyer, and shall be at the buyers risk thereafter.
Delivery Delays
We assume no responsibility for delays in delivery, or defaults resulting from strikes, work stoppages, fires, floods, accidents, war, inability to obtain materials, or any other cause unavoidable and beyond our control.
Approval
All quotations, contracts, orders, or agreements are subject to approval and/or acceptance by the main office of GWC. We reserve the right to correct clerical or stenographic errors in quotations, orders, invoices, and other contracts, agreements, or documents.
Taxes
GWC quotations and/or contracts do not include any municipal, state, or federal sales, excise, use occupational, or other taxes, and any such tax, if paid by us will be charged to the purchaser.
Prices
Possession of price lists will not be accepted by GWC as an obligation, or offer to sell the goods listed therein to anyone. All prices contained therein are subject to change without notice, and supersede all previous lists. All orders will be invoiced at prices in effect at the time of shipment unless quoted in writing.
Catalog Illustrations
Catalog illustrations are actual representations of a certain size of each product line, but do not necessarily represent all sizes in details. We reserve the right to institute changes in materials, designs, and specifications without notice in keeping with our policy of continuing product improvement.
Catalog Weights
Catalog weights represent average weights of products and are in no sense guaranteed.
Changes
Orders cannot be cancelled or specifications be changed without the consent of GWC, and then only in terms indemnifying GWC against loss.
Returns
See Return Goods Policy on next page.
Quotations
Goods quoted F.O.B. our service center are subject to prior sale. Prices quoted are valid only for the duration indicated in the quotation. Quoted prices supersede all previous prices, quotations, or contracts, and are subject to change without notice.
Special Orders
Orders for special goods must be in writing and accompanied with detailed prints and/or sets of specifications, unless specifications on the orders are definite and complete. Orders will not be entered with the factory unless this is adhered to. Cancellation charges will be as outlined in our quotations.
Cancellations
Orders placed with us cannot be cancelled without our prior written consent. A cancellation charge will be applicable as outlined in our quotation.
Freight Terms
All shipments are F.O.B. our service centers. See current bulletin for freight allowance.
Warranty
See warranty on reverse side
Warranty
GWC Valve International
GWC Valve International, Inc. warrants each product sold, if the products are of our manufacture, against defects in material and workmanship under normal use and service for a period of one year after date of shipment. This warranty is made to the buyer only, and does not extend to any other party. The obligation of GWC Valve International, Inc. under this warranty is limited to: (a) replacement of any part or parts proven defective in material or workmanship, (b) repair of the product F.O.B. the factory or service center, (c) refund of the purchase price. In the case of product or parts not wholly of GWCs manufacture, GWCs liability under this warranty shall be limited to the extent of GWCs recovery from the manufacturer of such parts under its warranty to GWC. This warranty does not extend to any claims for labor, consequential damages, down time, or any other loss, damage, or expense of any kind arising out of the defect. We do not allow claims for unauthorized repairs, labor, or material. We are not responsible for loss of use, personal injury, lost profits, or any other damages whatsoever in connection with the warranties set forth. No warranty shall apply to any product which has been modified or changed in design or function after leaving GWCs facilities or which is misused or operated beyond its design capabilities, or used for other than its intended purpose. Purchasers of GWC products should consult knowledgeable advisors in the selection of product type and material of construction for their specific use. The buyer assumes all risk of this selection. The buyer shall permit GWC or its authorized representative to inspect the product so that it may determine its obligation. GWCshall be entitled to the return of the defective product or parts. Buyer must notify GWCpromptly upon discover of any claimed defect. No material may be returned without first obtaining written permission from GWC Valve International, Inc.
22
U S A H EAD Q UARTER S
GWC Valve Inter national , I nc. 4301 Yeager Way Bak e r sfie ld, CA 93313 Ph: 1-661-834-1775 Fax : 1-661-834-207 2 E-Mail: S ales@ GWCvalv e.com WWW.GWCValve . com
C atal og Nu mbe r TB V- 10 0 1