Documente Academic
Documente Profesional
Documente Cultură
Contents
Mobil and Esso lubricants - Quality for the future Advice for the handling of lubricants Mobil Products - Technical descriptions according to field of application Alphabetical index by application Alphabetical index by grade Esso Products - Technical descriptions according to field of application Alphabetical index by application Alphabetical index by grade Technical Technical remarks/measurement methods Viscosity Overview Valid from May 2005
Page
3 4 5 6 7 41 42 43 53 54 55
While this guide has been developed using the best information currently available, it is intended purely as a guidance. No responsibility is accepted by Esso Petroleum Company Limited and its affiliated and parent companies who or which has or have been in any way concerned with the compilation or publication of this guide, for the accuracy of any information or advice given herein or for any omission herefrom or for any consequences whatsoever resulting directly or indirectly from compliance with or adoption of guidance contained herein.
Technical Help
UK Help Desk: 0800 028 285 Ireland Help Desk: 18 00 882 024 Email: techdeskeurope@exxonmobil.com
It is essential that materials such as lubricants are stored and handled in an appropriate manner. Waste Oil Management Duty of care - UK legislation requires that companies take all reasonable care to dispose of waste oil properly and ensure it is disposed of in an approved manner. Prevent escape - you must not allow waste to escape. Complete records you must keep records of all consignements of waste. Safe disposal - you must not allow waste to be disposed of in such a way that it endangers life or causes pollution. Spill kits - emergency kits should be available and the staff should be trainined in their use. Storage Bulk tanks - should be bunded and labelled correctly. Measuring devices should be calibrated and service regularly. Barrels - should be stored in a bunded area and laid on their side to prevent moisture entry. Pack storage - should be secure and well ventilated it may also be necessary to control the temperature to keep certain fluids. Drains - ensure drains located in any storage areas are not connected to external drains, sewer or water course. Display appropriate warning signs. Hygiene Avoid unnecessary contact with new or used oils - use personal protective equipment. Never wear contaminated clothing or put oily rags in overall pockets. Seek first aid for cuts and abrasions. Ensure medical advice is sought if any irritation or skin abnormality appears.
Please consult the Material Safety Data Sheet for information on the hazards of individual products.
Mobil Products
Application
Agricultural Oils Air Tool Oils Automotive Gear Oils Automotive Transmission Fluids Commercial Vehicle Oils Compressor Oils Cutting Fluids - Neat Cutting Fluids - Water Miscible Cylinder Oils Electrical Insulating Oils Gas Engine Oils Gear Oils
Page
22 30 13 17 18 30 35 34 27 30 31 27
Application
Greases Heat Transfer Oils Hydraulic Oils Lubricants of the Food Industry Motorcycle Oils Open Gear Lubrication Grease Passenger Engine Oils Refrigeration Oils Rust Preventives Slideway and Spindle Oils Specialty Products Turbine and Circulation Oils
Page
38 33 25 37 21 40 10 29 36 25 33 23
Product
Mobil 1 0W-30 Mobil 1 0W-40 Mobil 1 5W50 Mobil 1 ESP Formula 5W-30 Mobil 1 Racing 2T Mobil 1 Racing 4T 15W-50 Mobil 1 Turbo Diesel 0W-40 Mobil 600W Super Cylinder Oil Mobil Agri Super 10W-30 Mobil Almo 525 Mobil Almo 527 Mobil Almo 529 Mobil ATF 220 Mobil ATF 320 Mobil ATF SHC Mobil Chassis Grease LBZ Mobil Delvac 1 5W-40 Mobil Delvac 1230 Mobil Delvac 1240 Mobil Delvac 1320 Mobil Delvac 1330 Mobil Delvac 1340 Mobil Delvac 1640 Mobil Delvac Hydraulic 10W Mobil Delvac MX 15W-40 Mobil Delvac Super 1400 15W-40 Mobil Delvac Super GEO 15W-40 Mobil Delvac XHP Extra 10W-40 Mobil DTE 11M Mobil DTE 13M
Page
10 10 10 10 21 21 12 27 22 30 30 30 18 17 17 39 18 20 20 20 20 20 20 20 19 19 19 19 26 26
Product
Mobil DTE 15M Mobil DTE 16M Mobil DTE 18M Mobil DTE 19M Mobil DTE 22 Mobil DTE 24 Mobil DTE 25 Mobil DTE 26 Mobil DTE 27 Mobil DTE 798 Mobil DTE 832 Mobil DTE 846 Mobil DTE Excel 100 Mobil DTE Excel 32 Mobil DTE Excel 46 Mobil DTE Excel 68 Mobil DTE FM 100 Mobil DTE FM 150 Mobil DTE FM 220 Mobil DTE FM 32 Mobil DTE FM 46 Mobil DTE FM 68 Mobil DTE Oil Heavy Mobil DTE Oil Heavy Medium Mobil DTE Oil Light Mobil DTE Oil Medium Mobil DTE PM 220 Mobil EAL Arctic 22 Mobil EAL Arctic 22 CC Mobil EAL Arctic 32
Page
26 26 26 26 25 25 25 25 25 23 23 23 26 26 26 26 37 37 37 37 37 37 23 23 23 23 24 29 29 29
Product
Mobil EAL Arctic 46 Mobil EAL Arctic 68 Mobil Extra 2T Mobil Extra 4T 10W-40 Mobil Extra Hecla Super Cylinder Oil Mobil Extra Super Cylinder Oil Mineral Mobil FM 100 Spray Lubricant Mobil Gargoyle Arctic Oil 155 Mobil Gargoyle Arctic Oil 300 Mobil Gargoyle Arctic SHC 224 Mobil Gargoyle Arctic SHC 226 E Mobil Gargoyle Arctic SHC 228 Mobil Gargoyle Arctic SHC 230 Mobil Gargoyle Arctic SHC 234 Mobil Gargoyle Arctic SHC NH 68 Mobil Gearlube VS 500 Mobil Gearlube VS 600 Mobil Glygoyle 11 Mobil Glygoyle 22 Mobil Glygoyle 30 Mobil Glygoyle Grease 00 Mobil Glygoyle HE 220 Mobil Glygoyle HE 320 Mobil Glygoyle HE 460 Mobil Glygoyle HE 680 Mobil Nyvac FR 200D Mobil Pegasus 1 Mobil Pegasus 605 Mobil Pegasus 610 Mobil Pegasus 705
Page
29 29 21 21 27 27 37 29 29 29 29 29 29 29 29 15 15 28 28 28 39 28 28 28 28 26 31 32 32 31
Product
Mobil Pegasus 710 Mobil Pegasus 805 Mobil Pegasus 905 Mobil Pegasus HPC 40 Mobil Polyrex EM Mobil Pyrolube 830 Mobil Pyrotec HFD 46 Mobil Rarus 424 Mobil Rarus 425 Mobil Rarus 426 Mobil Rarus 427 Mobil Rarus 429 Mobil Rarus 827 Mobil Rarus 829 Mobil Rarus SHC 1024 Mobil Rarus SHC 1025 Mobil Rarus SHC 1026 Mobil SHC 524 Mobil SHC 526 Mobil SHC 624 Mobil SHC 626 Mobil SHC 629 Mobil SHC 630 Mobil SHC 632 Mobil SHC 634 Mobil SHC 639 Mobil SHC 825 Mobil SHC FM 46 Mobil SHC PM 220 Mobil Super FE Special 5W-30
Page
31 31 31 31 39 33 26 30 30 30 30 30 30 30 30 30 30 25 25 24 24 24 24 24 24 24 23 37 24 11
Product
Mobil Super M 10W-40 Mobil Super M 15W-40 Mobil Super M Diesel 15W-40 Mobil Super S 10W-40 Mobil Super S Turbo Diesel 10W-40 Mobil Synt S 5W-40 Mobil Synt S Special V 5W-40 Mobil Vactra Oil No 1 Mobil Vactra Oil No 2 Mobil Vactra Oil No 3 Mobil Vactra Oil No 4 Mobil Vacuoline 128 Mobil Vacuoline 133 Mobil Vacuoline 137 Mobil Vacuoline 146 Mobil Vacuoline 525 Mobil Vacuoline 528 Mobil Vacuoline 533 Mobil Vacuoline 537 Mobil Vacuoline 546 Mobil Vacuoline Oil 1405 Mobil Vacuoline Oil 1409 Mobil Vacuum Pump Oil Mobil Velocite Oil No 10 Mobil Velocite Oil No 3 Mobil Velocite Oil No 4 Mobil Velocite Oil No 6 Mobil Zerice S 100 Mobil Zerice S 46 Mobil Zerice S 68
Page
11 12 12 11 12 11 11 25 25 25 25 24 24 24 24 24 24 24 24 24 25 25 30 25 25 25 25 29 29 29
Product
Mobilarma 524 Mobilarma LT Mobilarma MT Mobilarma ST Mobilcut 222 Mobilcut 242 Mobilcut 321 Mobilect 35 Mobilfluid 422 Mobilfluid 424 Mobilfluid 426 Mobilgear 626 Mobilgear 627 Mobilgear 629 Mobilgear 630 Mobilgear 632 Mobilgear 634 Mobilgear 636 Mobilgear OGL 007 Mobilgear OGL 007A Mobilgear OGL 009 Mobilgear SHC 22M Mobilgear SHC 3200 Mobilgear SHC 46M Mobilgear SHC 6800 Mobilgear SHC XMP 150 Mobilgear SHC XMP 220 Mobilgear SHC XMP 320 Mobilgear SHC XMP 460 Mobilgear SHC XMP 680
Page
36 36 36 36 34 34 34 30 16 16 17 28 28 28 28 28 28 28 40 40 40 28 28 28 28 27 27 27 27 27
Product
Mobilgear XMP 150 Mobilgear XMP 220 Mobilgear XMP 320 Mobilgear XMP 460 Mobilgrease EAL 102 Mobilgrease FM 007 Mobilgrease FM 102 Mobilgrease FM 462 Mobilgrease Special Mobilgrease XHP 103 Mobilgrease XHP 221 Mobilgrease XHP 222 Mobilgrease XHP 322 Special Mobilgrease XHP 461 Mobilith SHC 007 Mobilith SHC 100 Mobilith SHC 1000 Special Mobilith SHC 1500 Mobilith SHC 220 Mobilith SHC 460 Mobilith SHC PM
Page
27 27 27 27 39 39 39 39 39 38 38 38 38 38 38 38 38 38 38 38 38
Product
Mobilmet 424 Mobilmet 427 Mobilmet 443 Mobilmet 762 Mobilmet 763 Mobilmet 766 Mobilsol PM Mobiltac 375 NC Mobiltemp 1 Mobiltemp 78 Mobiltemp SHC 100 Mobiltherm 603 Mobiltherm 605 Mobiltrans HD 10W Mobiltrans HD 30 Mobiltrans HD 50 Mobiltrans SHC V 30 Mobilube 1 SHC 75W-90 Mobilube GX 80W-90 Mobilube GX-A 80W Mobilube HD 80W-90
Page
35 35 35 35 35 35 33 28 38 38 38 39 39 16 16 16 13 13 14 14 15
Product
Mobilube HD 85W-140 Mobilube HD-A 85W-90 Mobilube LS 85W-90 Mobilube SHC LS 75W-90 Mobilux EP 0 Mobilux EP 004 Mobilux EP 023 Mobilux EP 1 Mobilux EP 2 Mobilux EP 3 Quaker Quintolubric 888-46 Quaker Quintolubric 888-68 Vacmul 03D Vacmul 925 Vacmul EDM 2 Vacmul G 13 Vacmul XLM 10 Vacmul XLM 13 Vacmul XLM 543
Page
15 14 15 13 38 38 38 38 38 38 26 26 35 35 35 35 35 35 35
Automotive
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
Mobil 1 0W-30
0W-30
56
10.3
175
0.851
-54
Meets ACEA A1/B1/A5/B5 API SJ/SL/CF/EC Ford WSS M2C 913A/B Meets ACEA C3, A3/B3/B4 API CF Engine test requirements of API SL/SM
5W-30
73
12.1
164
0.851
-45
Mobil 1 5W50
5W-50
105
17.5
184
0.859
-54
10
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
5W-40
93
14.1
156
0.857
-51
High performance semi-synthetic engine oil. Primarily for use in Volkswagen pump injected diesel engines (PD TDi) according to VW 505 01 and Ford diesel engines according to Ford WSS M2C 917-A. Fully synthetic high performance engine oil. Ideal for modern, high performance engines, especially turbocharged. Excellent low and high temperature properties. Suitable for most types of gasoline and diesel engines found in passenger cars. High performance, high shear stable semisynthetic engine oil for gasoline and diesel engines. Specially developed for Ford vehicles. Semi-synthetic high performance engine oil. Effective wear and deposit control. Keeps engines cleaner and better protected than standard conventional mineral oils. Enhanced thermal and oxidation stability. Premium quality multi grade engine oil containing a combination of high quality conventional mineral oils and a premium performance additive system. For diesel and gasoline engines found in passenger cars, including turbocharged.
5W-40
84
14.2
176
0.855
-39
Approved BMW Longlife 98 GM-LL-B025 Porsche VW 502 00/505 00 MB 229.3 Meets API SL
5W-30
59
10.6
172
0.850
-51
Meets ACEA A1/B1 Ford WSS M2C 913A/B Meets ACEA A3/B3 API SL/SJ/CF Quality Level VW 500 00 Meets ACEA A3/B3 API SL/SJ/CF Quality Level VW 500 00
10W-40
98
14.4
157
0.870
-30
10W-40
98
14.4
157
0.870
-30
11
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
15W-40
107
14.4
138
0.885
-24
Meets ACEA A3/B3 API SL/SJ/CF Quality Level VW 501 01 Meets ACEA B3/B4 API CF
Premium quality multi grade suitable for both gasoline and diesel engines of passenger cars. Based on carefully selected mineral oils and high performance additive system. Fully synthetic advanced performance engine oil including new SuperSyn antiwear technology. Recommended for turbocharged diesel engines to provide improved cold starting as well as excellent high temperature protection. Semi-synthetic premium quality engine oil. Enhanced high and low temperature protection in severe driving conditions. For use in naturally aspirated and turbocharged diesel engines in passenger cars and light commercial vehicles. Premium quality multi grade engine oil containing solvent refined refined mineral base oils. Especially for use in diesel engines found in passenger cars, inluding turbo-charged
0W-40
80
14.3
187
0.855
-54
10W-40
98
14.4
157
0.870
-30
15W-40
107
14.4
138
0.885
-24
12
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
75W-90
107
15.5
149
0.890
-39
Mobiltrans SHC V 30
30
10.3
144
-54
13
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
80W
76
10,0
104
0.89
-33
Automotive gear lubricant formulated from high performance base oils and an advanced additive system. Used for commercial transmissions, axles and final drives where protection against wear and scoring is required. Provides excellent performance in Mercedes Benz applications and where API GL-4 is required. High performance, heavy duty gear lubricant formulated from high quality base oils and an advanced additive system. For use in automotive heavy-duty transmissions, axles, and final drives where protection against wear and scoring is required. Provide excellent performance where API GL-4 is required.
Mobilube GX 80W-90
80W-90
135
14.5
104
0.892
-33
85W-90
184
17,0
99
0.903
-24
Heavy duty gear lubricant formulated from high performance base oils and an advanced additive system. For use in commercial transmissions, axles and final drives where extreme pressures and shock loading are expected. Provide exceptional performance where API GL-5 is required.
14
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
Mobilube HD 80W-90
80W-90
136
14.5
97
0.897
-30
Mobilube HD 85W-140
85W-140
328
25.3
97
0.905
-18
High performance, heavy duty gear lubricants using high performance base oils and an advanced additive system. For use in automotive applications including heavy duty axles and final drives where extreme pressures and shock loading are expected. Provide excellent performance where API GL-5 is required. Meets API GL-5 Super premium, automotive gear lubricant formulated from select high quality base oils and an optimum balance of additives designed for limited-slip applications. Provides reliable performance in cars and light commercial vehicles including taxicabs, trucks and buses where limitedslip capability is required. Fully synthetic rear axle oils for use in hypoid axles with limited slip differentials in passenger cars and SUV vehicles. Service fill for rear axles of Opel Frontera, Isuzu Trooper, Mitsubishi, Nissan, Toyota and other 4-wheel drive vehicles with hypoid final drives and locked differentials. Fully synthetic rear axle oils for use in hypoid axles. Specially formulated and approved by BMW for use in cinventional (non-limited slip) differentials. Suitable for other high performance applications where an API GL-5 gear lubricant is specified.
Mobilube LS 85W-90
85W-90
153
15.3
100
0.899
-36
75W-140
177
25.0
174
0.862
-54
75W-90
101
15.4
161
0.857
-57
15
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
Mobiltrans HD 10W
10W
42
6.3
96
0.888
-33
Mobiltrans HD 30
30
100
11.2
97
0.893
-18
Meets CAT TO-4 (All) Quality Level Allison C-4 (10W, 30)
Mobiltrans HD 50
50
195
18.0
100
0.906
-15
Extra high performance, heavy duty transmission and drive-train lubricants to meet the specifications required by Caterpillar TO-4. Designed to optimise the performance of powershift transmissions, gearboxes, and final drives. Provide maximum protection even in high pressure hydraulic systems. Extra high performance, multipurpose tractor lubricant for transmission and hydraulic fluid requirements. Used for service top-up and refill of transmissions, final drives and hydraulic systems of farm and industrial tractors and other mobile equipment and with oil-immersed brake systems. Special frictional characteristics to prevent squawk and chatter in wet brake systems and for consistent braking performance. Extra high performance, multipurpose tractor lubricants for transmission and hydraulic fluid requirements. Designed for off highway and commercial equipment operating in a wide range of environments and conditions. Excellent lubrication performance for drive trains of agricultural and construction equipment in severe duty applications. Suitable for reducing wet brake and Power Take-Off (PTO) chatter.
Mobilfluid 422
83
10.7
118
0.894
-27
Meets MF 1135
Mobilfluid 424
10W-30
55
9.3
145
0.884
-42
Quality Level Allison C-4 Caterpillar TO-2 Vickers 35VQ35 MF 1135, MF 1141 Denison HF-0 Ford ESN-M2C-134D John Deere J20C Powerfluid 821 XL JI Case MS 120407/09
16
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
Mobilfluid 426
59
9.7
149
0.889
-33
Quality Level Allison C-4 John Deere J20C Caterpillar TO-2 JI Case MS 120407/09 Vickers 35VQ35 MF 1135, 1141 Denison HF-0 Ford ESN-M2C-134D Powerfluid 821 XL
Extra high performance, multipurpose tractor lubricant for transmission and hydraulic fluid requirements. Designed for off highway and commercial equipment operating in a wide range of environments and conditions. Excellent lubrication performance for drive trains of agricultural and construction equipment in severe duty applications. Suitable for reducing wet brake and Power Take-Off (PTO) chatter.
35
7.7
201
0.863
-42
High performance ATF that meets the latest specifications. Outstanding low temperature cold start performance.
17
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
37
7.1
153
0.870
-45
Approved MB 236.7 ZF TE-ML 03D/04D/11A/14A /17C Voith G607 MAN 339D Allison C-4
Quality Level GM Dextron IID Caterpillar TO-2 GM Type A Suffix A Renk Doromat
High performance ATF Fluid for automatic transmissions, power steering sytems and some manual transmissions. Also suitable for some special hydraulic systems.
18
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
10W-40
93
14.0
152
0.871
-36
Approved MAN M3277 MB 228.5 Volvo VDS-2/VDS-3 MTU Type 3 Renault RXD
Synthetic extra high performance diesel engine oil engineered to provide outstanding lubrication for modern, high performance diesel engines used in severe on and off-highway applications. Uses high performance base oils to provide excellent low temperature fluidity, high temperature viscosity retention, volatility control and fuel economy improvement. Long oil drain intervals. Extra high performance diesel engine oil that provides excellent lubrication of modern diesel engines promoting extended engine life. Suitable for many major European and American engine manufacturers. Used in a wide variety of industries, applications and mixed fleets.
15W-40
105
14.2
138
0.880
-33
Meets ACEA E7/B4/B3/A2 API CI-4/CH-4/CG4/CF-4 API CF/SJ/SL Cat ECF-1 Quality Level Allison C-4 Meets ACEA E3/B2 API CF-4/CF Quality Level API CG-4
15W-40
106
15.0
145
0.887
-27
High performance diesel engine oil that provides proven engine protection of diesel engines operating in on and off-highway severe service applications. Recommended for use in a wide range of heavy-duty applications and operating environments found in the trucking, mining, construction, quarrying and agricultural industries. High performance natural gas engine oil. Heavy-duty truck and bus applications using CNG and LNG.
15W-40
110
14,4
132
0.879
-27
19
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
40
132
14.7
112
0.892
-21
Approved MB 228.2 MAN 270 MTU Type 2 Meets ACEA E2 API CF JASO DH-1
Extra high performance diesel engine oil formulated from advanced base oils and a balanced additive system to meet or exceed the demanding specifications of global builders of modern diesel engines. Exceptional performance in many European and Japanese-designed intercooled, highly turbocharged engines operating under the most severe on and off-highway conditions. High performance hydraulic oil formulated from advanced base oils and a balanced additive system for a wide range of heavyduty hydraulic equipment requirements, on and off-highway. Contains an effective balance of ashless dispersants and metallic detergents combined with inhibitors to control oxidation, wear, corrosion and rust. High performance, heavy duty diesel engine oils. Used in intercooled, turbo-charged engines operating under severe on and off highway conditions. Used in a wide range of applications where a monograde lubricant is recommended.
10W
39
6.3
109
0.879
-33
20 30 40
61 106 146
108 99 99
Quality Level API SF/CF MB 227.0 (1330 & 1340) Allison CF-4 (1330)
30
110
12.0
98
0.892
-30
40
160
15.5
98
0.894
-30
Monograde diesel engine oils, including 2cycle engines, normally aspirated and turbocharged. For commercial vehicles and contractor equipment, gasoline engines of passenger cars and farming equipment.
20
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
Motorcycle Oils
Mobil 1 Racing 2T 83 12.7 154 0.884 -42 Meets API TC JASO FC Meets ISO E-GC/E-GD TISI Fully synthetic high performance motor oil for most types of high-powered 2-stroke motorcycle-engines. Excellent thermal and oxidation stability. Helps to extend spark plug and valve life, to reduce ring sticking and piston tightening and to prevent of preignition problems. Suitable also for outboard engines. Semi-synthetic extra high performance lubricant. Reduces exhaust smoke and delivers outstanding protection and cleanliness. For 2-stroke engines in motorcycles, snowmobiles and chain saws. Fully synthetic, highly advanced lubricant for high-powered 2-stroke motorcycle engines. Delivers exceptional engine protection and cleanliness for everyday use and in race conditions. Semi-synthetic extra high performance motorcycle oil. For all types of 4-stroke engines in a wide range of operating conditions.
Mobil Extra 2T
55
8.8
135
0.877
-24
15W-50
152
20.7
159
0.866
-45
Meets JASO MA
10W-40
98
14.4
157
0.870
-30
Meets JASO MA
21
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
Agricultural Oils
Mobil Agri Super 10W-30 10W-30 80 12.0 148 0.880 -36 Approved ZF-TE-ML 06B/07B Meets MF 1144 Quality Level API CE/SF/GL-4 MF 1139/1135 Allison C-4 John Deere J27 Ford M2C 159B High performance, multi-functional STOU lubricant for use in a wide range of heavyduty applications and operating environments found in the farming industry. Provide good performance in diesel and gasoline engines, transmissions, hydraulics, final drives and oil-immersed brakes.
22
Industrial
BRAND NAME ISO VG KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
32 46
30 42
5.4 6.2
110 106
0.862 0.870
-30 -30
224 244
46
44
6.8
106
0.865
-30
232
32 46 68 100
31 45 65 95
102 98 95 92
23
Industrial (cont.)
BRAND NAME ISO VG KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
Synthetic gear and bearing lubricants. Designed for use in hot and cold conditions. Excellent thermal and oxidation stability for long service life. For use in industrial enclosed gear sets and in heavily loaded plain and rolling element bearings.
14.8 18.8 23.9 30.1 10.7 14.4 18.8 24.4 29.4 25.6
96 95 95 95 99 96 96 96 95 133
0.890 0.893 0.900 0.898 0.884 0.888 0.890 0.900 0.901 0.863
280 288 286 296 264 272 284 288 286 220
Extra high quality circulation oils for the lubrication of plain bearings, operating with heavy water contamination. Morgoil rolling mills. Outstanding demulsibility. Meets DIN 51517 Part 2, Morgan Construction Company Advanced Lubrication Specification. Extra high performance heavy duty circulatory oils. Meet the critical requirements of No-Twist Rod Mills by Morgan and Danielli. Have excellent water demulsibility. Suitable for gears and bearings. Meet Morgan Construction Company No Twist Rod Mill Lubricant Specification.
Synthetic, high performance lubricant. For use in demanding industrial paper machine circulatory systems of high output paper machines and calendar rolls. Separates water effectively and retain their colour characteristics for long periods of operation. High quality, high performance lubricant for demanding industrial paper machine circulatory systems. Excellent separation from water. Good anti-wear performance. DIN 51517 Part 3.
220
220
18.4
95
0.889
-6
260
24
Industrial (cont.)
BRAND NAME ISO VG KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
Extra high performance lubricants specifically designed to satisfy the requirements of machine tools that use one oil for both hydraulic systems and way lubrication. Premium performance oils for the lubrication of high-speed spindles in machine tools. They have good oxidation and thermal resistance. Good resistance to foaming and separate readily from water.
No No No No
3 4 6 10
2 5 10 22
2 5 10 22
104 104
Hydraulic Oils
Mobil SHC 524 Mobil SHC 526 32 68 32 68 6.4 11.5 144 158 0.852 0.854 -54 -42 234 216 Synthetic high performance anti-wear hydraulic oils. Very high VI for excellent low and high temperature performance. Maximum anti-wear protection for vane and piston pumps. Wide range of operating temperatures and shear stable. Premium quality anti-wear industrial hydraulic fluids. Optimum balance of high quality base stocks with anti-wear agents for maximised keep clean and antiwear protection. Long service life and good filtrability even in the presence of water. Approved by Denison HF-0 and Vickers I-286-S and M2650-S, depending on viscosity grade.
22 24 25 26 27
22 32 46 68 100
21 31 44 71 95
98 98 98 98 98
25
Industrial (cont.)
BRAND NAME ISO VG KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
Mobil Mobil Mobil Mobil Mobil Mobil Mobil Mobil Mobil Mobil
DTE DTE DTE DTE DTE DTE DTE DTE DTE DTE
11M 13M 15M 16M 18M 19M Excel Excel Excel Excel 32 46 68 100
15 32 46 68 100 150 32 46 68 95
3.7 6.1 7.9 10.0 12.8 16.6 5.4 6.5 8.5 10.8
0.859 0.874 0.879 0.884 0.888 0.895 0.873 0.878 0.883 0.890
-42 -45 -42 -45 -36 -36 -33 -33 -33 -24
188 210 216 218 228 268 222 226 230 230
Supreme performance high VI anti-wear hydraulic oils. Optimum flow properties even at sub-zero temperatures. Shear stable for long service life. Maximised keep clean and antiwear protection. Approved by Denison HF-0 and Vickers I-286-S and M2650-S depending on viscosity grade. Meet DIN 51524 Part 3 and ISO 11158 HV.
Premium quality, zinc-free anti-wear hydraulic oils. Unique additive systems gives outstanding thermal, oxidative and hydrolytic stability, even in the presence of water and water-based cutting fluids. Meets Denison HF-0, Vickers I-286-S and M2650-S depending on viscosity grade and DIN 51524 Part 2. Fire resistant phosphoric acid ester based HFD fluid. Designed especially for use in turbines and turbine control system requiring HFD-R fluids. High quality, anti-wear environmentally aware hydraulic oil. Used in a wide range of mobile equipment in moderate service conditions. Approved by RAL Blauer Angel. Meets ISO 15380. High performance fire resistant hydraulic fluids. Based on synthetic polyolesters basestocks, HF-DU type. Good compatibilty with elastomers. Used where fire hazard and environmental considerations are important.
46
43
5.0
1.13
-24
263
46
50
9.8
186
0.922
<-30
>310
46 68
46 68
9.0 11.5
181 165
0.909 0.911
-24 -24
42
8.4
1.089
-30
175
Extra high performance water-glycol (HFC) type fire resistant hydraulic oil. Good anti-wear properties and corrosion protection. Red in colour.
26
Industrial (cont.)
BRAND NAME ISO VG KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
Cylinder Oils
Mobil 600W Super Cylinder Oil Mobil Extra Hecla Super Cylinder Oil Mobil Extra Super Cylinder Oil Mineral 460 680 460 680 30.5 35.8 95 85 0.910 0.918 -6 0 282 282 Extra high performance, high viscosity oils for steam cylinders. Lubrication of high load and slow moving bearings and gears. Also suitable for use in worm gears.
1000
1000
43.0
80
0.920
288
96 96 96 96
27
Industrial (cont.)
BRAND NAME ISO VG KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
98 98 98 98 97 96 90 160 160
Extra high performance gear oils having outstanding extreme pressure characteristics and load-carrying properties. Intended for use in all types of enclosed gear drives with circulation or splash lubrication systems. Meets AGMA 9005-D94 EP, DIN 51517 Part 3 (CLP), ISO 12925-1 Type CKD.
Very high viscosity, extra-heavy-duty synthetic lubricants for industrial low speed enclosed gears and plain and rolling bearings. Do not contain any solvent. Synthetic, supreme performance, ultra high viscosity lubricants intended for use in heavily loaded open gears. Can be pumped over long distances and use standard spray application equipment. Do not contain any solvent. High performance, poly-alkylene-glycol (PAG) based lubricants. For use in extreme temperature gear, bearing and circulation applications. Not miscible with mineral oils. Fully synthetic, high performance polyalkylene glycol (PAG) worm gear lubricants. Provide excellent EP/anti-wear protection, corrosion and rust protection and foam resistance. Compatible with most seals and gaskets, but not with mineral oils. Very low pour points. Plain and rolling contact bearings in wide variety of applications. High quality, diluent-type lubricant for lubrication of large, slow moving heavily loaded open gears, resistant to rain, snow and process water washing.
22000 46000
22000 46000
700 1375
180 210
0.890 0.924
6 15
232 240
Mobil Glygoyle 11 Mobil Glygoyle 22 Mobil Glygoyle 30 Mobil Mobil Mobil Mobil Glygoyle Glygoyle Glygoyle Glygoyle HE HE HE HE 220 320 460 680
Mobiltac 375 NC
5000
0.960
121
28
Industrial (cont.)
BRAND NAME ISO VG KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
Refrigeration Oils
Mobil Gargoyle Arctic SHC 224 Mobil Gargoyle Arctic SHC 226 E Mobil Gargoyle Arctic SHC 228 Mobil Gargoyle Arctic SHC 230 Mobil Gargoyle Arctic SHC 234 Mobil Gargoyle Arctic SHC NH 68 32 68 100 220 68 29 68 97 220 399 64 5.6 10.2 13.7 25.0 40.0 8.5 132 136 147 149 150 111 0.827 0.833 0.838 0.846 0.853 0.848 -54 -45 -45 -39 -39 -54 230 266 255 260 280 211 Fully synthetic, supreme performance lubricants, specifically designed for use in refrigeration compressors and heat pumps. Outstanding resistance to thermal/oxidative degradation. Suitable for use with Ammonia, R-22 and other HCFCs and carbon dioxide. Quality Level USDA H-1.
Fully synthetic refrigeration compressor oil blended with PAO and alkyl benzene basestocks. Recommended for screw and reciprocating compressors, using ammonia as refrigerant. High performance naphthenic mineral oils for refrigeration compressors. Low pour points and excellent fluidity at very low temperatures. Food freezing, cold storage plants and marine applications. For ammonia refrigerant but also selected hydrocarbons. Not for HFC refrigerants. Fully synthetic, high performance Environmental Awareness Lubricants (EAL) oils for refrigeration compressors using ozone-friendly HFC refrigerants. Based pm synthesised polyol esters (POEs). Miscible with HFC refrigerants. Suitable for household and commercial refrigeration and air conditioning systems in shopping malls and hotels and low temperature transportation. Mobil EAL Arctic 22CC is for Copeland compressors. Synthetic, premium quality refrigeration compressor oils. Based on alkyl benzenes. For a range of industrial reciprocating and rotary compressors with fluorocarbon refrigerants such as R502 and R12.
Mobil Gargoyle Arctic Oil 155 Mobil Gargoyle Arctic Oil 300
32 68
32 68
0.910 0.910
-42 -42
190 200
22 22 CC 32 46 68
22 22 32 46 68
23 24 34 49 68
46 68 100
48 64 98
29
Industrial (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
Compressor Oils
Mobil Rarus SHC 1024 Mobil Rarus SHC 1025 Mobil Rarus SHC 1026 32 46 68 32 46 67 5.6 7.2 10.4 127 131 144 0.846 0.849 0.854 -39 -48 -45 245 236 246 Supreme performance fully synthetic oils for the lubrication of rotary screw and vane air compressors. Reduced deposit formation. Stationary and mobile applications. Long service life.
100 150
107 158
10.1 13.2
66 77
0.945 0.976
-36 -39
270 270
Synthetic, supreme performance air compressor lubricants. For use in severe duty reciprocating air compressors. Single and multistage air compressors. Stationary and mobile equipment. Premium performance ashless air compressor oils. Single and multistage air compressors. Suitable for reciprocating and rotary type machines. Excellent wear protection. Stationary and mobile applications. Meets DIN 51506 VD-L (RWTUEV approved) specification.
32 46 68 100 150
32 46 68 106 147 64
Mineral oil based lubricant suitable for a wide range of vacuum pumps.
30
Industrial (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
40
130
13.5
97
0.890
-12
262
40
126
13.0
97
0.885
-21
247
40
130
13.5
99
0.890
-12
262
40
126
13.2
98
0.887
-15
252
40
128
13.2
98
0.894
-15
249
31
Industrial (cont.)
BRAND NAME ISO VG KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
40
129
13.4
96
0.887
-18
255
TBN = 10.8. Ash = 0.5%. High performance gas engine oil for medium and high speed four stroke engines operating on aggressive fuel such as hydrogen sulpide and halogens. Quality Level Deutz MWM, Caterpillar and Waukesha. TBN = 11.1. Ash = 1.0%. High performance gas engine oil for medium and high speed four stroke engines operating on very corrosive fuel such as hydrogen sulphide and halogens. Quality Level of Deutz MWM, Jenbacher, Wartsila, Waukesha.
40
132
13.6
98
0.889
-18
257
32
Industrial (cont.)
BRAND NAME ISO VG KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
Specialty Products
Mobil Pyrolube 830 180 20.4 132 0.930 -45 270 Synthetic, PAO/ester mix based, high temperature lubricant for conveyor chains (up to 230C). Excellent oxidation stability and reduced deposit formation. Synthetic based cleaner for circulatory systems such as paper machine, hydraulic and heating systems
Mobilsol PM
383
21.0
56
0.885
-27
208
33
Industrial (cont.)
BRAND NAME pH DILUTION DILUTION APPEARANCE MIN DENSITY OIL @ 15C CONTENT% APPLICATION & DESCRIPTION
Mobilcut 321
8.9
Green solution
9.6 9.4
Translucent Translucent
40 50
34
Industrial (cont.)
BRAND NAME ISO VG KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
10 19 35 6
Vacmul 925
22
165
1.8 (@20C) 13
3.1
0.749 0.857
-21
70 192
Vacmul XLM 10
10
0.840
184
Vacmul XLM 13
13
170
14
0.856
-24
35
Industrial (cont.)
BRAND NAME SOILDS
CONTENT
FILM
THICKNESS
FILM TYPE
FLASH POINT C
Rust Preventives
Mobilarma 524 88 10.5 0.882 Oily 218 A high performance rust preventative oil, SAE 40, recommended for temporary corrosion protection of hydraulic systems, gearboxes and engines. These systems can be flushed or run at light load, and then drained, leaving a protective film. Solvent based corrosion preventives for short, medium and long term protection. Thin films and high coverage capacity. Higher flash point for enhanced operator safety and lower evaporation.
11 17 31
Oil-like Greaselike
Wax-like
62 62 62
36
Industrial (cont.)
BRAND NAME ISO VG KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
100
99
10.4
0.790
-21
216
Mobil SHC FM 46
46
43
7.3
133
0.832
-57
262
37
Industrial (cont.)
BRAND NAME COLOUR NLGI CLASS TYPE OF THICKENER BOV mm2/s OR cST
DROPPING
POINT C
Greases
Mobiltemp SHC 100 Tan 2 Clay 100 Fully synthetic anti-wear grease for high temperature applications. Excellent resistance to thermal/oxidative degradation with excellent structural stability at high temperature. Long life for extended relubrication periods and energy savings potential. Supreme performance fully synthetic greases designed for a wide variety of applications at extremes of temperature and operating conditions. Excellent adhesion, structural stability and resistance to water. Used in industrial, automotive and marine applications.
007 100 220 460 PM 1500 1000 Special 103 221 222 461 322 Special
Red Red Red Red White Red Black Blue Blue Blue Blue Black Tan Tan Tan Tan Tan Tan Tan Black
Lithium Lithium Lithium Lithium Lithium Lithium Lithium Lithium Lithium Lithium Lithium Lithium
Complex Complex Complex Complex Complex Complex Complex Complex Complex Complex Complex Complex
460 100 220 460 460 1500 1000 100 220 220 460 320 1000 460 150 150 150 150 460 460
Mobilgrease Mobilgrease Mobilgrease Mobilgrease Mobilgrease Mobilux Mobilux Mobilux Mobilux Mobilux Mobilux EP EP EP EP EP EP
Extra high performance greases for industrial, automotive, construction and marine applications. Used for severe operating conditions, including high temperature, water contamination, high loads and shock loading. Mobilgrease XHP 322 Special contains molybdenum disulphide for extra protection. High performance general-purpose industrial greases. Based on mineral oils and a lithium thickener to provide extra protection against wear, rusting and water washout. Suitable for equipment where moist or wet conditions are common. Recommended for most types of industrial applications including heavy-duty applications. Mobilux EP 004 and Mobilux EP 023 are used for enclosed gears. High performance clay-thickened greases. Used for plain and anti-friction bearings operating at low speed and high temperature. Low volatility and excellent resistance to oxidation and water washout and good anti-wear performance. Mobiltemp 78 contains molybdenum disulphide.
023 004 0 1 2 3
Mobiltemp 1 Mobiltemp 78
38
Industrial (cont.)
BRAND NAME COLOUR NLGI CLASS TYPE OF THICKENER BOV mm2/s OR cST
DROPPING
POINT C
Green
00
Lithium
Synthetic, polyglycol based semi-fluid long service life grease. First and service fill. For enclosed gears and bearings.
Mobilgrease Special
Black
Lithium
150
Extreme pressure lithium thickened grease. Contains molybdenum disulphide to give extra protection in heavily loaded bearings. Wheel bearings and chassis components in automotive and industrial equipment, passenger cars, trucks, farm tractors, construction and mobile equipment. Biodegradable, synthetic-ester based, multipurpose grease. Water resistant with good adherance properties. For use in environmentally sensitive applications. Super performance polyurea thickened grease. Recommended for electric motor bearings and sealed-for-life bearings. High temperatures and low oil separation. Also for low noise sensitive environments. Semi-fluid grease, designed for the central lubrication systems of commercial vehicles. Excellent flow properties at low temperatures in long pipelines. MB pg 264. Willy Vogel. Range of food grade approved greases. Multipurpose and gear box applications. For the food, beverage and sanitation industries. NSF registered. Quality Level USDA H-1
Tan
Lithium
100
Mobil Polyrex EM
Blue
Polyurea
110
Green
00
Lithium
40
2 00 2
39
Industrial (cont.)
BRAND NAME COLOUR NLGI CLASS TYPE OF THICKENER BOV mm2/s OR cST
DROPPING
POINT C
00
Lithium
460
200
40
Esso Products
41
Application
Agricultural Oils Automotive Transmission Fluids Commercial Vehicle Engine Oils Greases Hydraulic Oils
Page
52 52 49 46 45
Application
Motorcycle Oils Paper Machine Oils Passenger Engine Oils Turbine and Circulation Oils
Page
51 45 47 44
42
Product
Esso 2T Esso 2T Special Esso 2T Synthetic Esso 4T Special 10W-40 Esso 505 01 5W-40 Esso ATF D 21605 Esso ATF EZL 799 Esso ATF LT 71141 Esso Extra 15W-40 Esso Extra 20W-50 Esso Extra Diesel 15W-40 Esso Ultra 10W-40 Esso Ultra 5W-30 Esso Ultra 913 5W-30 Esso Ultra Turbo Diesel 10W-40 Esso Ultron 5W-40 Esso Ultron Turbo Diesel 5W40 Esso Unifarm 10W-30
Page
51 51 51 51 47 52 52 52 48 48 49 47 47 47 48 47 48 52
Product
Esso Unifarm 15W-40 Esso Uniflo 10W-40 Esso Uniflo 15W-40 Esso Uniflo 20W-50 Esso Uniflo Diesel 15W-40 Esso Uniflo Diesel 20W-50 Essolube Hydraulic 10W Essolube X 3 Essolube X 3 Essolube X 3 Essolube XT 2 15W-40 Essolube XT 4 15W-40 Essolube XT 5 15W-40 Faxam 32 Nuto 100 Nuto 32 Nuto 46 Nuto 68
Page
52 48 48 48 49 49 50 51 51 51 50 50 49 44 44 44 44 44
Product
Nuto H 100 Nuto H 22 Nuto H 32 Nuto H 46 Nuto H 68 Teresstic EP 46 Teresstic N 150 Teresstic N 220 Teresstic T 100 Teresstic T 32 Teresstic T 46 Teresstic T 68 Unirex EP 2 Unirex N 2 Unirex N 3 Univis HVI 13 Univis HVI 26
Page
45 45 45 45 45 44 45 45 44 44 44 44 46 46 46 45 45
43
Industrial
BRAND NAME ISO VG KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
Teresstic EP 46
46
46
6.8
102
0.876
-12
228
32 46 68 100
32 46 68 100 32
32 46 68 100 32
97 97 98 98 90
Faxam 32
44
Industrial (cont.)
BRAND NAME ISO VG KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C FLASH POINT C APPLICATION & DESCRIPTION
Hydraulic Oils
Nuto Nuto Nuto Nuto Nuto H H H H H 22 32 46 68 100 22 32 46 68 100 22 32 46 68 100 4.4 5.4 6.7 8.5 11.1 95 95 95 95 95 0.865 0.872 0.876 0.882 0.884 -24 -24 -21 -18 -15 206 212 226 234 242 Premium quality anti-wear hydraulic oils intended for industrial and mobile service applications, employing gear, vane, radial and axial piston pumps. Depending on the viscosity grade, Approved by Denison HF-0; Quality Level Vickers I-286-S and Vickers M-2950-S; Meets DIN 51524-2 and ISO 11158 HM specifications.
14 26
5.3 9.3
384 360
0.872 0.878
-60 -60
101 103
Premium performance anti-wear hydraulic oils characterised by very high VIs. Possess high resistance to viscosity change. Applications include severe hydraulic systems used in hydrostatic transmissions and dash pots, fine instruments and servo valves.
45
Greases
BRAND NAME ISO VG TYPE OF THICKENER BASE OIL VISCOSITY cSt @ 40C DROPPING POINT C APPLICATION & DESCRIPTION
Unirex N 2 Unirex N 3
2 3
115 115
260 260
Premium quality long-life lithium complex greases suitable for hightemperature service in all types of bearings. Versatile product profile with applications in a wide range of industries but most particularly for electric motors and sealed-for-life bearings. Premium quality lithium complex thickened mineral oil based grease. Excellent multipurpose grease, particularly where there may be water contamination and/or heavy duty in service. Suitable for plain and antifriction bearings in a wide variety of industrial and automotive applications.
Unirex EP 2
Lithium Complex
220
260
46
Automotive
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
5W-40
93
14.1
156
0.857
-51
Semi synthetic passenger car engine oil. For use in pump-jerk diesel engines according to OEM specifications. Semi-synthetic premium quality motor oil that delivers excellent engine protection in a wide variety of operating conditions. Designed for use in Peugeot and Citreon gasoline and diesel engines.
5W-30
59
10.1
162
0.857
-42
5W-30
59
10.6
172
0.850
-51
Semi-synthetic premium quality engine oil, developed for use in Ford gasoline and diesel engines. Aims to improve fuel economy and reduce exhaust emission.
10W-40
97
14.4
153
0.876
-30
Semi-synthetic premium quality engine oil. Compared to conventional products, it offers excellent wear protection under a wide variety of operating conditions.
47
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
10W-40
98
14.4
152
0.876
-27
Meets API SL/SJ/CF ACEA A2/B2 Meets API SL/SJ/CF ACEA A3/B3, A2/B2 Meets API SL/SJ/CF ACEA A3/B3, A2/B2 Quality Level API SG/CD
High quality mineral oil based engine oil. For year round use in normally aspirated petrol engines. High quality mineral oil based engine oil. For year round use in normally aspirated petrol engines. High quality mineral oil based engine oil. For year round use in normally aspirated gasoline engines. Mineral oil based quality engine oil. For year round use in normally aspirated gasoline engines. Mineral oil based quality engine oil. For year round use in normally aspirated gasoline engines. Meets API CF ACEA B3/B4 Fully synthetic, super premium quality engine oil. For modern diesel engines with multivalve fuel injection engines and turbochargers.
15W-40
107
14.4
138
0.885
-24
20W-50
171
19.1
127
0.894
-24
15W-40
100
14.5
150
0.881
-30
20W-50
160
19.0
135
0.890
-33
5W-40
84
14.2
176
0.855
-39
Approved VW 505 00 MB 229.3 Peugeot D Level 3 GM-LL-B025 BMW Longlife Oil 98 Approved MB 229.1 VW 505 00 PSA D-02 Level 2
10W-40
97
14.4
153
0.876
-30
Semi-synthetic premium quality engine oil. For use in naturally aspirated and turbocharged diesel engines in passenger cars and light commercial vehicles.
48
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
15W-40
107
14.4
138
0.885
-24
High quality mineral oil based engine oil. For year round use in normally aspirated diesel engines.
20W-50
171
19.1
127
0.894
-24
Meets API SL/SJ/CF ACEA A3/B3, A2/B2 Quality Level API SG/CD
High quality mineral oil based engine oil. For year round use in normally aspirated diesel engines. Mineral oil based quality engine oil. For year round use in normally aspirated diesel engines.
15W-40
100
14.5
150
0.881
-33
49
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
Essolube XT 4 15W-40
15W-40
106
14.4
135
0.880
-30
Premium diesel engine oil that provides reliable engine protection in severe service applications. Based on advanced multifunctional additive technology with highly refined base stocks, it provides excellent performance with extended oildrain intervals. Recommended for use in a wide range of applications in the trucking, mining, construction and agricultural industries. Premium, heavy duty engine oil that provides reliable diesel and gasoline engine protection. Recommended for use in a wide range of heavy duty applications and operating environments found in the trucking, construction and agricultural industries. Premium hydraulic oil formulated from high quality base oils and a balanced additive system for a wide range of hydraulic equipment requirements. Uses an effective balance of ashless dispersants and metallic detergents combined with inhibitors to control oxidation, wear, corrosion and rust. Used for on and off-highway applications.
Essolube XT 2 15W-40
15W-40
105
14.6
139
0.880
-27
10W
39
6.3
109
0.879
-33
50
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
30 40 50
99 99 99
Premium, heavy duty diesel engine oils formulated with high quality base oils and a balanced additive system. For use in intercooled, turbo-charged engines operating in severe on and off highway applications where a monograde lubricant is recommended.
Motorcycle Oils
Esso 2T Synthetic 83 12.7 154 0.884 -42 Meets API TC JASO FC Meets API TC ISO E-GC Meets API TB JASO FB Meets API SJ JASO MA Meets API TC JASO FC Meets JASO FC TISI Meets API TB JASO FB Meets API SJ JASO MA Premium quality fully synthetic lubricant for use in a wide range of two stroke motorcycles. Suitable for outboard engines High performance semi-synthetic base stock lubricant for 2-stroke engines. For motorcycles, snowmobiles and chain saws. Engine oil for two stroke engines used in motor cycles, snowmobiles and lean oil/fuel ratio chain saws. High performance synthetic based motor oil for most types of 4-stroke engines. Delivers excellent engine protection and cleanliness.
Esso 2T Special
55
8.8
135
0.867
-24
Esso 2T
63
8.7
110
0.878
-12
10W-40
98
14.4
157
0.870
-30
51
Automotive (cont.)
BRAND NAME SAE GRADE KIN VISCOSITY mm2/s OR cSt 40C 100C VI DENSITY @ 15C g/cm3 POUR POINT C SPECIFICATIONS APPLICATION & DESCRIPTION
37.3
7.9
191
860
Passenger car lubricant for vehicles fitted with Continuously Variable Transmission systems. Semi-synthetic oil for ATF requirements for major international transmission manufacturers.
37
7.3
168
853
-54
Agricultural Oils
Esso Unifarm 10W-30 10W-30 80 12.0 148 0.880 -36 Approved ZF-TE-ML 06B/07B Meets MF 1144 Quality Level API CE/SF/GL-4 Allison C-4 John Deere J27 Ford M2C 159B MF 1139/MF1135 Quality Level API CF/CE/SF/GL-4 MF 1139 Allison C-4 John Deere J27 Ford M2C 159B STOU Premium, multi-functional tractor, STOU lubricants for most farm equipment applications. Suitable for use in diesel and gasoline engines, transmissions, hydraulics, final drives and oil-immersed brakes.
15W-40
96
14.2
140
0.880
-30
52
Technical
53
Flash Point The flash point is the lowest temperature at which the vapor of a combustible liquid can be made to ignite momentarily in air, as distinct from fire point. There are a number of ASTM tests for flash point, e.g. Cleveland open cup, Pensky-Martens closed tester, Tag closed tester, Tag open cup.
Flash point is an important indicator of the fire and explosion hazards associated with a petroleum product.
NLGI The National Lubrication Grease Institute established a simplified system for rating the consistency of grease (see table on the left). Pour Point The pour point is the lowest temperature at which an oil is observed to flow, when cooled under conditions prescribed by the test method ASTM D 97. The pour point is 3C (5F) above the temperature at which the oil in a test vessel shows no movement when the container is held horizontally for five seconds. TBN The Total Base Number is the weight in milligrams of acid, expressed in equivalent milligrams of KOH (potassium hydroxide), to neutralize all basic constituents of one gram of oil. Test Methods are ASTM D 664 (potentiometric method) or ASTM D 974 (colorimetric method).
Density The density of a petroleum product is defined as mass per unit volume, usually expressed as kilograms litre (kg/l).
3 3 3 = m v t/m ; kg/dm ; kg/I; g/ml; kg/m
The density is also used for the determination of the oil mass or pump power, in terms of lubrication performance it has only minor significance. Dropping Point The dropping point is the lowest temperature at which a grease is sufficiently fluid to drip, as determined by test method ASTM D 566 or D 2265. It is an indication of whether a grease will flow from a bearing at operating temperatures. The test is of limited significance in predicting overall service performance.
54
Viscosity - Overview
Penetration (worked) Penetration is reported as the tenths of a millimetre (penetration number) that a standard cone, acting under the influence of gravity, will penetrate the grease sample under test conditions prescribed by method ASTM D 217. Standard test temperature is 25C (77F). The higher the penetration number, the softer the grease. Worked penetration is the penetration of a sample immediately after it has been subjected to 60 double strokes of a standard grease worker.
ISO VG The ISO Viscosity Grades are an international system approved by the International Standards Organization (ISO) for classifying industrial lubricants according to viscosity. Each ISO viscosity grade number designation corresponds to the mid-point of a viscosity range expressed in centistokes (cSt) or mm2/s at 40C. For example, a lubricant with an ISO grade of 32 has a viscosity within the range of 28.8 - 35.2 cSt, the mid-point of which is 32.
ISO VG ISO VG ISO VG ISO VG ISO VG ISO VG ISO VG ISO VG ISO VG ISO VG
2.2 3.2 4.6 6.8 10 15 22 32 46 68 100 150 220 320 460 680 1000 1500
1.98 2.88 4.14 6.12 9.00 13.5 19.8 28.8 41.4 61.2 90.0 135 198 288 414 612 900 1350
2.42 3.52 5.06 7.48 11.0 16.5 24.2 35.2 50.6 74.8 110 165 242 352 506 748 1100 1650
NLGI Grade
000 00 0 1 2 3 4 5 6
Note from the table that the grades above 68 are multiples of 10 or 100 of the grades from 10 through 68
55
SAE The Society of Automotive Engineers is an organisation responsible for the establishment of many U.S. automotive and aviation standards, including the viscosity classifications of engine oils and gear oils. The classification is not able and does not intend to specify the quality, the field of application or the additives of the fluid.
6200 at -35 6600 at -30 7000 at -25 7000 at -20 9500 at -15 13000 at -10 -
3.8 3.8 4.1 5.6 5.6 9.3 5.6 9.3 12.5 16.3 21.9
NOTE: 1 cp = 1 mPas; 1 cSt = 1mm2/s. 1 All values are critical specifications as defined by ASTM D 3244 (see text, Section 3). 2 ASTM D 5293. 3 ASTM D 4684 (See also Appendix B and text, Section 4.1): Note that the presence of any yield stress detectable by this method constitutes a failure regardless of viscosity. 4 ASTM D 445.
<24.0 <41.0 -
a Centipoise (cp) is the customary absolute viscosity unit and is numerically equal to the corresponding SI unit of millipascal-second (mPas). b Centistokes (cSt) is the customary kinematic viscosity unit and is numerically equal to the corresponding SI unit of square millimeter per second (mm2/s). c The precision of ASTM Method D 2983 has not been established for determinations made at temperatures below -40C; consequently, this fact should be realised in any producer-consumer relationship. It is expected that ASTM will shortly undertake work in the range down to -55C for D 2983.
56
500 000 300 000 200 000 100 000 70 000 50 000 30 000 20 000 10 000 7 000 5 000 4 000 3 000 2 000 1 500 1 000 800 700 600 500 400 300 200 150 100 90 80 70 60 50 40 30 25 20 18 16 14 12 11 10 9 8 7 6 5 4.5 4.0 3.5 3.0 2.7 100 mm2 / s 90 80 70 60 50 40 30 25 20 18 16 14 12 10 9 8 7 6
Mobil DTE 27 Mobil DTE 26 Mobil DTE 25 Mobil DTE 24 Mobil DTE 22
5 4.5 4 3.5 3
-50 -45 -40 -35 -30 -25 -20 -15 -10 -5 0 +5 10 15 20 25 30 -18 C
40
50
60
70
80
90
40 C 50 C
Temperature(C)
57
Esso Petroleum Company Limited ExxonMobil House Ermyn Way Leatherhead Surrey KT22 8UX Tel: 0800 028 285
Esso Ireland Limited 4th Floor, Block C Central Park Leopardstown Dublin 18 Tel: 18 00 882 024
The Mobil logo, Esso logo, the Flying Horse design, the Running Tiger and ExxonMobil Logo are trademarks of Exxon Mobil Corporation or one of its subsidiaries. 2005 Exxon Mobil Corporation In this document the term, ExxonMobil is used for convenience only and may refer to Exxon Mobil Corporation or one of its Affiliates.
Email: techdeskeurope@exxonmobil.com
www.exxonmobil.co.uk
Stock number MI9720