Documente Academic
Documente Profesional
Documente Cultură
All contents are Copyright 19922007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 4
Addressing Table
Device Interface Fa0/0 Fa0/1 HQ S0/0/0 S0/0/1 S0/1/0 S0/1/1 Fa0/0 B1 Fa0/1 S0/0/0 Fa0/0 B2 Fa0/1 S0/0/0 Fa0/0 B3 Fa0/1 S0/0/0 ISP Web Server PC1 PC2 PC3 PC4 PC5 PC6 PC7 PC8 Fa0/0 S0/0/0 NIC NIC NIC NIC NIC NIC NIC NIC NIC IP Address 10.2.0.225 10.2.0.233 209.165.201.2 172.17.1.225 172.17.1.229 172.17.1.233 10.2.0.1 10.2.0.65 172.17.1.226 10.2.0.129 10.2.0.161 172.17.1.230 10.2.0.193 10.2.0.209 172.17.1.234 209.165.202.129 209.165.201.1 209.165.202.130 10.2.0.62 10.2.0.126 10.2.0.158 10.2.0.190 10.2.0.206 10.2.0.222 10.2.0.230 10.2.0.238 Subnet Mask 255.255.255.248 255.255.255.248 255.255.255.252 255.255.255.252 255.255.255.252 255.255.255.252 255.255.255.192 255.255.255.192 255.255.255.252 255.255.255.224 255.255.255.224 255.255.255.252 255.255.255.240 255.255.255.240 255.255.255.252 255.255.255.252 255.255.255.252 255.255.255.252 255.255.255.192 255.255.255.192 255.255.255.224 255.255.255.224 255.255.255.240 255.255.255.240 255.255.255.248 255.255.255.248 Default Gateway N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 209.165.202.129 10.2.0.1 10.2.0.64 10.2.0.129 10.2.0.161 10.2.0.193 10.2.0.209 10.2.0.225 10.2.0.233
All contents are Copyright 19922007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 2 of 4
Objectives
Design and document an addressing scheme based on requirements. Select appropriate equipment and cable the devices. Apply a basic configuration to the devices. Test connectivity between directly connected devices. Configure RIPv2 routing. Configure static and default routing for Internet access. Verify full connectivity between all devices in the topology.
All contents are Copyright 19922007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 4
Step 2: Verify RIPv2. Use verification commands to check your configuration. All routers should be converged on all the 10.2.0.0/24 and 172.17.1.224/28 subnets
Task 6: Configure static and default routing. Task 7: Test connectivity and examine the configuration.
Test connectivity and examine the configuration.
All contents are Copyright 19922007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 4 of 4