Documente Academic
Documente Profesional
Documente Cultură
MAINTENANCE
Loss of signal (LOS) Transmitter Signal (TF) Transmitter degraded (TD) Loss of frame (LOF) AIS Excessive BER (EBER) Degraded Signal (DS) Loss of Pointer (LOP) Payload Mismatch (PLM) Far End Received Failure (FERF) Server Signal Failure (SSF) Frequency offset (DRIFT) Loss of timing source (LOSS) Resource Isolation Communication Subsystem Isolation (CSF) Unequipped (U) Referred to Signal Label Unconfigured Equipment Present (UEP)
Check line Replace unit Replace unit when possible (laser degrade) Check line (alignment problems due to line error) Check connected equipment Check line (excessive line BER) Check line (line signal degrade) Check line Configuration error Check farend equipment Check all the TU path. Alarm indicates AIS signal received on the TU Check reference and connection between it and the equipment Check reference and connection between it and the equipment Check connection between NE and Craft Terminal Check Communication configuration (LAPD)
Configuration error
Internal Communication Prob- Reset NE. If persists substitute EQUICO/SYNTH1N/SYNTH4 unit lem according to the NE type. URU Underlying Resource Insert the board Unavailable PM_AS Performance Monitoring Alarm Synthesis Check path / line section interested to the indication.
CPECommunication protocol Check MSP protocol (architecture type, switch fail) error LOMF Loss Of MultiFrame Check payload structure
ED
02
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel.
MAINTENANCE
AUXP
BOARD ACRONYM
MAINTENANCE
A2S1 A21E1 A3E3 A3T3 A4ES1 AFOX ETHATX ETHMB GETHAG HPROT L41 L41N L42 L42N M4E1 M1E3 M1T3 P3E3/T3 P4ES1N P4S1 P4S1N P21E1 P21E1N P21E1NM4 P63E1 P63E1N P63E1NM4 S41 S41N SERVICE EQUICO
Replace unit
Insert right unit (unit inserted into a slot set with another type of unit)
Replace unit
ED
02
Unit Problem (RUP) Unit type mismatch (RUTM) Power Problem (POP) Pump failure (PF) Enclosure Door Open (EDO) Unit missing (RUM)
Replace unit Insert right unit (unit inserted into a slot set with another type of unit) Replace unit
PR16
Replace unit Check that the protection cover in front of the unit has been correctly placed.
Unit Problem (RUP) Unit type mismatch (RUTM) Pump failure (PF) Enclosure Door Open (EDO) Unit missing (RUM) BST10 BST15 BST17
Replace unit Insert right unit (unit inserted into a slot set with another type of unit) Replace unit Check that the protection cover in front of the unit has been correctly placed.
Replace unit GETHMB Insert right unit (unit inserted into a slot set with another type of unit) Internal dialogue problem in the unit. It indicates a temporary condition which will be restored. If the condition persists it is due to a unit hardware failure: in this case it will activate the RUP alarm
ED
02
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel.
BOARD ACRONYM
MAINTENANCE
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel.
NAME AND ACRONYM OF DISPLAYED ALARM Unit missing (RUM) Unit Problem (RUP) Unit type mismatch (RUTM) Version Mismatch Internal communication problem (ICP) Unit missing (RUM) Unit Problem (RUP) Unit type mismatch (RUTM) High Laser Temperature (HLT) Cooling Fans Failure (CFF)
BOARD ACRONYM
MAINTENANCE
Insert missing unit MATRIX MATRIXN PREA S1P PREAS1P PREA1GBE PREA4ETH ATM8X8 ATM4X4 SYNTH1 SYNTH1N SYNTH4
Replace unit Insert right unit (unit inserted into a slot set with another type of unit) Update software version by means of SW download Internal dialogue problem in the unit. It indicates a temporary condition which will be restored. If the condition persists it is due to a unit hardware failure: in this case it will activate the RUP alarm
S161 S161N S161ND L161 L161N L 161N L161ND L162 L 162 L162N L162ND I161ND
Replace unit Insert right unit (unit inserted into a slot set with another type of unit)
Replace unit
Check the fan units and substitute the faulty one FAN
ED
02
Unit missing (RUM) Unit Problem (RUP) Unit type mismatch (RUTM) CONGI LAN problem (LAN) Battery Failure (BF) Fuse Failure (FF) Unit missing (RUM) Unit Problem (RUP) Unit type mismatch (RUTM) Battery Failure (BF) Fuse Failure (FF) SERGI
Replace unit Insert right unit (unit inserted into a slot set with another type of unit) This alarm type is present only on 1650SMC or 1660sm. Check LAN interconnection or substitute CONGI unit According to the CONGI slot check the station battery. (Battery A or Battery B) Substitute the fuse on the CONGI unit.
Replace unit Insert right unit (unit inserted into a slot set with another type of unit) Check the Station Battery connected to the unit
ED
02
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel.
BOARD ACRONYM
MAINTENANCE
ICMI IS1.1 IL1.1 IL1.2 MM1 IS4.1 IL4.1 IL4.2 SMOPT 1000BSX 1000BLX OHI OLIN OHMM OLMM
All rights reserved. Passing on and copying of this document, use and communication of its contents not permitted without written authorization from Alcatel.
ED
02