Documente Academic
Documente Profesional
Documente Cultură
ICS524 Features
Extremely low skew outputs (50 ps maximum) Packaged in 8-pin SOIC Available in Pb (lead) free package Low power CMOS technology Operating voltages of 2.5 V to 5 V 5 V tolerant input clock Industrial temperature range
Block Diagram
Q0 Q1 ICLK Q2 Q3
ICS524
REV C 021909
Pin Assignment
ICLK Q0 Q1 NC 1 2 3 4 8 7 6 5 8-pin SOIC GND Q3 Q2 VDD
Pin Descriptions
Pin Pin Number Name
1 2 3 4 5 6 7 8 ICLK Q0 Q1 NC VDD Q2 Q3 GND
Pin Type
Input Output Output Power Output Output Power Clock input, 5V tolerant input. Clock output 0. Clock output 1. Internal no connect.
Pin Description
Connect to +2.5 V, +3.3 V or +5.0 V. Clock Output 2. Clock Output 3. Connect to ground.
External Components
A minimum number of external components are required for proper operation. A decoupling capacitor of 0.01 F should be connected between VDD on pin 5 and GND on pin 8, as close to the device as possible. A 33 series terminating resistor may be used on each clock output if the trace is longer than 1 inch. To achieve the low output skew that the ICS524 is capable of, careful attention must be paid to board layout. Essentially, all four outputs must have identical terminations, identical loads and identical trace geometries. If they do not, the output skew will be degraded. For example, using a 30 series termination on one output (with 33 on the others) will cause at least 15 ps of skew.
ICS524
REV C 021909
Item
Supply Voltage, VDD Outputs ICLK Ambient Operating Temperature Storage Temperature Junction Temperature Soldering Temperature 7V
Rating
-0.5 V to VDD+0.5 V -0.5 V to 5.5 V -40 to +85 C -65 to +150 C 125 C 260 C
Min.
-40 +2.375
Typ.
Max.
+85 +5.25
Units
C V
DC Electrical Characteristics
VDD=2.5 V 5%, Ambient temperature -40 to +85 C, unless stated otherwise
Parameter
Operating Voltage Input High Voltage, ICLK Input Low Voltage, ICLK Output High Voltage Output Low Voltage Operating Supply Current Nominal Output Impedance Input Capacitance Short Circuit Current
Symbol
VDD VIH VIL VOH VOL IDD ZO CIN IOS
Conditions
Note 1 Note 1 IOH = -16 mA IOL = 16 mA No load, 135 MHz ICLK
Min.
2.375 VDD/2+0.5 2
Typ.
Max.
2.625 5.5 VDD/2-0.5 0.4
Units
V V V V V mA pF mA
25 20 5 28
ICS524
REV C 021909
Symbol
VDD VIH VIL VOH VOL VOH IDD ZO CIN IOS
Conditions
Note 1 Note 1 IOH = -25 mA IOL = 25 mA IOH = -12 mA No load, 135 MHz ICLK
Min.
3.15 VDD/2+0.7 2.4
Typ.
Max.
3.45 5.5 VDD/2-0.7 0.4
Units
V V V V V V
VDD-0.4 35 20 5 50
mA pF mA
Symbol
VDD VIH VIL VOH VOL VOH IDD ZO CIN IOS
Conditions
Note 1 Note 1 IOH = -35 mA IOL = 35 mA IOH = -12 mA No load, 135 MHz ICLK
Min.
4.75 VDD/2+1 2.4
Typ.
Max.
5.25 5.5 VDD/2-1 0.4
Units
V V V V V V
VDD-0.4 45 20 5 80
mA pF mA
ICS524
REV C 021909
AC Electrical Characteristics
VDD = 2.5 V 5%, Ambient Temperature -40 to +85 C, unless stated otherwise
Parameter
Input Frequency Output Rise Time Output Fall Time Propagation Delay Output to Output Skew Device to Device Skew tOR tOF Note 1 Note 2 Rising edges at VDD/2 Rising edges at VDD/2 0.8 to 2.0 V, CL=15 pF 2.0 to 0.8 V, CL=15 pF 2.2
Symbol
Conditions
Min.
0
Typ.
1.0 1.0 3 0
Max. Units
200 1.5 1.5 5 50 500 MHz ns ns ns ps ps
VDD = 3.3 V 5%, Ambient Temperature -40 to +85 C, unless stated otherwise
Parameter
Input Frequency Output Rise Time Output Fall Time Propagation Delay Output to Output Skew Device to Device Skew tOR tOF Note 1 Note 2 Rising edges at VDD/2 Rising edges at VDD/2 0.8 to 2.0 V, CL=15 pF 2.0 to 0.8 V, CL=15 pF 2.0
Symbol
Conditions
Min.
0
Typ.
0.6 0.6 2.4 0
Max. Units
200 1.0 1.0 4 50 500 MHz ns ns ns ps ps
Symbol
Conditions
Min.
0
Typ.
0.3 0.3 2.5 0
Max. Units
200 0.7 0.7 4 50 500 MHz ns ns ns ps ps
Notes: 1. With rail to rail input clock 2. Between any 2 outputs with equal loading. 3. Duty cycle on outputs will match incoming clock duty cycle. Consult IDT for tight duty cycle clock generators.
Thermal Characteristics
Parameter
Thermal Resistance Junction to Ambient
Symbol
JA JA JA JC
Conditions
Still air 1 m/s air flow 3 m/s air flow
Min.
Typ.
150 140 120 40
Max. Units
C/W C/W C/W C/W
ICS524
REV C 021909
Package Outline and Package Dimensions (8-pin SOIC, 150 Mil. Narrow Body) Package dimensions are kept current with JEDEC Publication No. 95
Millimeters Symbol
8
Min
Max
A A1 B
E H
C D E e H h L
INDEX AREA
1.27 BASIC
0.050 BASIC
1 2 D
-Ce
B SEATING PLANE L
.10 (.004)
Ordering Information
Part / Order Number
524MILF 524MILFT
Marking
524MILF 524MILF
Shipping Packaging
Tubes Tape and Reel
Package
8-pin SOIC 8-pin SOIC
Temperature
-40 to +85 C -40 to +85 C
Parts that are ordered with a "LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant. While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT) result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or critical medical instruments.
ICS524
REV C 021909
www.IDT.com
For Sales
800-345-7015 408-284-8200 Fax: 408-284-2775
Corporate Headquarters
Integrated Device Technology, Inc. 6024 Silver Creek Valley Road San Jose, CA 95138 www.idt.com
2006 Integrated Device Technology, Inc. All rights reserved. Product specifications subject to change without notice. IDT and the IDT logo are trademarks of Integrated Device Technology, Inc. Accelerated Thinking is a service mark of Integrated Device Technology, Inc. All other brands, product names and marks are or may be trademarks or registered trademarks used to identify products or services of their respective owners. Printed in USA