Documente Academic
Documente Profesional
Documente Cultură
It is the process by which a computer retrieves a program instruction from its memory, determines what actions the instruction requires, and carries out those actions. This cycle is repeated continuously by the central processing unit (CPU), from bootup to when the computer is shut down.
Contents
1 Circuits Used 2 Initiating the cycle 3 Fetch cycle 4 Decode 5 Read the effective address 6 Execute cycle 7 The Fetch-Execute cycle in Transfer Notation 8 References
Circuits Used
The circuits used in the CPU during the cycle are:
Program counter (PC) - an incrementing counter that keeps track of the memory address of the instruction that is to be executed next. Memory address register (MAR) - holds the address of a memory block to be read from or written to. Memory data register (MDR) - a two-way register that holds data fetched from memory (and ready for the CPU to process) or data waiting to be stored in memory Instruction register (IR) - a temporary holding ground for the instruction that has just been fetched from memory Control unit (CU) - decodes the program instruction in the IR, selecting machine resources such as a data source register and a particular arithmetic operation, and coordinates activation of those resources Arithmetic logic unit (ALU) - performs mathematical and logical operations
Each computer's CPU can have different cycles based on different instruction sets, but will be similar to the following cycle: 1. Fetching the instruction The next instruction is fetched from the memory address that is currently stored in the program counter (PC), and stored in the instruction register (IR). At the end of the fetch operation, the PC points to the next instruction that will be read at the next cycle. 2. Decode the instruction The decoder interprets the instruction. During this cycle the instruction inside the IR (instruction register) gets decoded. 3.In case of a memory instruction (direct or indirect) the execution phase will be in the next clock pulse. If the instruction has an indirect address, the effective address is read from main memory, and any required data is fetched from main memory to be processed and then placed into data registers(Clock Pulse: T3). If the instruction is direct, nothing is done at this clock pulse. If this is an I/O instruction or a Register instruction, the operation is performed (executed) at clock Pulse. 4. Execute the instruction The control unit of the CPU passes the decoded information as a sequence of control signals to the relevant function units of the CPU to perform the actions required by the instruction such as reading values from registers, passing them to the ALU to perform mathematical or logic functions on them, and writing the result back to a register. If the ALU is involved, it sends a condition signal back to the CU. The result generated by the operation is stored in the main memory, or sent to an output device. Based on the condition of any feedback from the ALU, Program Counter may be updated to a different address from which the next instruction will be fetched.
Fetch cycle
Step 1 of the Instruction Cycle is called the Fetch Cycle. These steps are the same for each instruction. The fetch cycle processes the instruction from the instruction word which contains an opcode.
Decode
Step 2 of the instruction Cycle is called the decode. The opcode fetched from the memory is being decoded for the next steps and moved to the appropriate registers...
Direct memory instruction - Nothing is being done. Indirect memory instruction - The effective address is being read from the memory.
If this is a I/O or Register instruction - the computer checks its kind and executes the instruction.
Execute cycle
Step 4 of the Instruction Cycle is the Execute Cycle. These steps will change with each instruction. Data is transferred between the CPU and the I/O module. Next arithmetic and logical operations given in the instructions are executed on the data, as well as other instructions such as jumping to another location on the program counter.
The registers used above, besides the ones described earlier, are the Memory Address Register (MAR) and the Memory Data Register (MDR), which are used (at least conceptually) in the accessing of memory. Often, the MDR is expressed as the MBR (Memory Buffer Register). Fetch and execute example (written in RTL - Register Transfer Language): PC=0x5AF, AC=0x7EC3, M[0x5AF]=0x932E, M[0x32E]=0x09AC, M[0x9AC]=0x8B9F. T0 : AR = 0x5AF (PC) T1 : IR = 0x932E (M[AR]), PC=0x5B0 (PC + 1) T2 : DECODE (IR) = ADD opCode, AR=0x32E, I=1 (Indirect instruction) T3 : AR = 0x9AC (M[AR]) T4 : DR = 0x8B9F (M[AR]) T5 : AC = 0x8B9F + 0x7EC3 = 0x0A62, E = 1 (carry out), SC = 0 Summary: this is an example for an ADD Instruction which makes use of Register Indirect addressing. The steps T0 to T5 have the following meaning: T0-T1 : Fetch operation T2 : Decode operation T3-T4 : Indirect Memory reference T5 : Execute ADD operation