Documente Academic
Documente Profesional
Documente Cultură
WINDSHIELDS
CRUISER &
TOURING
SEATS &
LUGGAGE
DECALS &
GRAPHICS
Combo
CONTROL
Single Rail
Tail Lamp
SUSPENSION Replacements
ON PAGE 1285
DRIVE TRAILER SPECS:
Single Rail Trailer Dual Rail Trailer Combo Trailer
Weight: 300 lbs Weight: 400 lbs Weight: 390 lbs
BRAKE Capacity: 1000 lbs Capacity: 2000 lbs Capacity: 1000 lbs
KENDON® TRAILERS Standing Height: 89”
Maximum Width: 72”
Standing Height: 93.5” Standing Height: 88”
• Round tube construction Maximum Width: 84” Maximum Width: 84”
• Removable rails for ATV or utility use (Dual Rail Trailer) Maximum Length: 120” Maximum Length: 120” Maximum Length: 120”
ENGINE Depth: 27” Depth: 27” Depth: 27”
• Larger casters
• Improved wheel chock system
• Wider center-to-center rail width. Holds any size rear bike tire
FUEL & AIR
• Lower platform and longer ramps for easier loading
• Full size spare tire mount
• Folds up and stands up for easy storage
ELECTRICAL • Double frame construction
• Powder-coated finish
• Chrome 13” wheels and tires
CHEMICAL • Independent rubber torsion suspension
• E-Z Lube axle system
• 2” coupler
SECURITY • Platform: 5’x7’ (Dual Rail Trailer)
& COVERS • 1-year manufacturer’s warranty on the trailer frame KENDON®
• 5-year manufacturer’s warranty on the axle TRAILER WINCH KIT
TRAILER & • Kit contains winch and cable, mounting
STANDS Description P/N Retail post, electrical cables, control box and
Single Rail Trailer - 1000 lb. capacity (weight 300 lbs) 77-5490 $2018.95 manual crank handle
Dual Rail Trailer - 2000 lb. capacity (weight 400 lbs) 77-54911 2414.95 • Powerful 12 volt DC winch with 6000 lb.
TOOLS Combo Trailer - 1000 lb. capacity (weight 390 lbs) 77-5489 2018.95 rolling load capacity
Single Rail Stone Guard 77-5494 298.95 • Hand-held winch control box with
Optional Center Rail 77-5488 129.95 20 ft. cord
SHOP 13” Full Size Replacement Tire 06-Up Vin # 77-5524 129.95
SUPPLIES • Winch drum has hook and 30 ft. of
Replacement Loading Ramp 77-5498 69.95 3/16” aircraft cable
Jack Stand 77-5499 45.95 • Winch post clamps onto trailer tongue,
DISPLAY 1
Trailer comes with 1 loading ramp. Must purchase additional ramp (77-5498)
& PROMO
no drilling, (hardware supplied)
for ATV use • Winch post attaches to all Kendon Trailers
• Electrical power is supplied by tow-vehicle battery
CROSS • Connect the tow cable, hold onto your bike – winch pulls
REFERENCE bike onto trailer
77-5544 $313.95
1282
EXHAUST
TIRES &
WHEELS
SPORT BIKE
SEATS &
LUGGAGE
SUSPENSION
CHEMICAL
SECURITY
& COVERS
TRAILER &
STANDS
37-0676 37-0677
1283
EXHAUST
TIRES &
WHEELS
SECURITY
& COVERS
TRAILER &
STANDS
BikeMaster®
INFLATE-IT
TOOLS
15-0067 15-0073 15-0081 “AIR COMPRESSOR
IN A CAN”
SHOP PRAIRIE VIEW • Small compact can is easy to carry and
SUPPLIES store
UTILITY JUG/FUEL • Use what you need and save the rest
DISPLAY CAN TRAVEL RACKS until you need it again
& PROMO • Single, double and triple racks for square jugs • Fills virtually anything containing air
• Can also be bolted to floor of enclosed trailer • Non-explosive, non-flammable
CROSS • Lockable retention bar and all hardware included
• Contains no CFC’s, environmentally
REFERENCE Description Square P/N Retail friendly
Single jug offset base rack Alloy 15-0067 $89.99 • Contains no sealant
1284 Double jug offset base rack
Triple jug offset base rack
Alloy
Alloy
15-0073
15-0081
119.99
139.99
Description
2.75 oz. Air Can
P/N
15-0271
Retail
$5.39
EXHAUST
TIRES &
WHEELS
WESBAR
SPORT BIKE
UNDER 80” TAIL LAMPS
• Designed for a wide variety of trailers TAILLIGHTS
• Meets D.O.T. requirements for: stop, • Low-profile, waterproof taillight
turn, tail and side marker light, side WINDSHIELDS
• Replaceable sealed lamp capsule
and rear reflectors • Flush or recess mounting
• Left hand has built-in LP illuminator
• Compact design WESBAR SUBMERSIBLE • 15” pigtail and mounting hardware CRUISER &
• 8” L x 2-7/8”H x 2-3/4”D
4.7”W x 4.7”H x 2.8” deep UNDER 80” TAILLIGHT KIT • Display packaged, sold individually
TOURING
• Push-in wiring connections • Uses a diving bell/trapped air system
• Mounts with 2 1⁄4” studs on industry Description P/N Retail
to keep bulbs dry and safe RH Assembly 15-5870 $34.95 SEATS &
standard 2” centers • All lamps are pre-wired for installation LUGGAGE
Description P/N Retail LH Assembly 15-5871 34.95
• Conforms to all applicable D.O.T. 108
Left Hand Tail Lamp 15-9660 $16.95 regulations
Right Hand Tail Lamp 15-9661 16.95 • Kit contains: 2 multi-function submersible DECALS &
taillights with gasketed lenses; 1 license GRAPHICS
21-5224 plate bracket; 1-20 ft. wishbone trailer
wiring harness, 1-4 ft. trunk connector
and accessory bag with frame clips CONTROL
and wire taps
Description P/N Retail
Taillight Kit 15-9663 $53.95 SUSPENSION
21-5223 Repl. License Plate Bracket 15-9664 3.95
EXHAUST
TIRES &
WHEELS
SPORT BIKE
WINDSHIELDS
CRUISER &
TOURING
SEATS &
TRAVELRACK P-LOK STRAPLESS
LUGGAGE
MOTORCYCLE CARRIER MOTORCYCLE LOCKDOWN SYSTEM
• Fits any Class III hitch • Minimizes jarring and shifting while maximizing usable
DECALS & • Only needs 2 tiedowns to be secure storage space, just simply bolt track to truck bed or trailer floor
GRAPHICS
• Aluminum rails make it light and easy to store • Single person operation
• Helps deter theft when used in conjunction with a lock
• Rated for 400 lbs., so that it will haul more than
• Increases fork seal life up to 300%
CONTROL the design limit of any Class III hitch • Simply set the system, insert rod through footpeg, step down to
• Note: The tongue weight of a receiver-type hitch is rated sag height, insert set pin and you are locked and loaded
at the distance the ball normally is from the end of the receiver. • P-Lok system includes a 21" track, 2 P-LOK bars, 2 P-LOK rods,
Most carriers of this type are approximately double that 2 detent ring pins and a tool case
SUSPENSION
distance so the load rating is normally reduced by 1/2. 10-0959 $249.95
A 500 lb. rated hitch will carry about 250 lbs. Check with
your hitch manufacturer
DRIVE Description P/N Retail
Carrier 59-0226 $244.95
Accessory Ramp 59-0227 44.95
BRAKE
ENGINE
ELECTRICAL
RISK RACING
CHEMICAL LOCK-N-LOAD
• Securely holds motocross bike into trailer without the use of
tiedown straps, floor anchors or wheel chocks
SECURITY • Frees up valuable space allowing the ability to transport more
& COVERS motorcycles or gear
• Takes an enormous amount of pressure off of fork seals
TRAILER & during transit
• Can be quickly removed from the trailer floor by unscrewing the
STANDS CYCLE COUNTRY 4 thumb screws leaving only the low profile mounting plates
MOTORCYCLE • Each plate has a “D” ring for additional anchor points on your
TOOLS WEDGE-LOK CARRIER trailer floor
• Wedge-Lok design helps reduce rattle and improves motorcycle • Simply roll or ride bike into trailer until the foot pegs hit the
carrier stability open jaws of the Lock-N-Load. Then step on the upper jaws and
SHOP • Fits any 2” Class III hitch they will automatically lock into place
SUPPLIES • Rated for 400 lbs., so will fit most dirt bikes and scooters • To release bike, simply rotate the knobs into the release position
and step on the top jaws
• Bike deck is 72” long and includes 4 tiedown points
• For additional safety, insert the attached locking pins prior
DISPLAY • Constructed of 7 gauge steel and powder-coated for long to transport
& PROMO lasting quality • You can replace the locking pins with padlocks for added
• Includes ramp for easy, single person loading and unloading security and a theft deterrent
CROSS (ramp stores between the wheels) • Designed for use with 125cc-450cc modern motocross specific
REFERENCE • Quick and easy to assemble bikes, or bikes with similar geometry regarding footpeg width
• Tough texture paint for long lasting finish and height
1286 56-6236 $263.94 77-8292 $179.00
EXHAUST
TIRES &
WHEELS
SPORT BIKE
WINDSHIELDS
10-0936
CRUISER &
TOURING
CONDOR ®
ELECTRICAL
CHEMICAL
SECURITY
& COVERS
TRAILER &
STANDS
TOOLS
CONDOR® TRAILER ONLY CHOCK CONDOR® SCOOTER CHOCK
• Fully adjustable wheel locking system capable of • Fully adjustable wheel locking system that will accommodate
accommodating either front or rear wheels in sizes from either the front or rear tire of virtually any scooter SHOP
SUPPLIES
14-22” / 80-220W and bikes weighing up to 300 lbs. • Comes with the trailer adapter kit but a floor adapter kit is
• Patented locking mechanism securely supports motorcycles in available separately which allows the unit to be used in the
an upright position garage or any flat surface DISPLAY
• As a trailer chock it easily snaps on and off transport platforms • Requires only one person to load or release any motorcycle & PROMO
• Requires only one person to load or release any motorcycle and in most cases, 2 tie-down straps are required to secure the
and 2 tie-down straps to secure bike for transport bike for transport CROSS
• Fold down for easy storage Description P/N Retail REFERENCE
Description P/N Retail Chock 10-0942 $155.00
Simple Chock - Trailer Only w/ Kit 10-0938 $185.00 Adapter Kit 10-0946 80.00 1287
EXHAUST
TIRES &
WHEELS
SPORT BIKE
WINDSHIELDS
CYCLE COUNTRY™
WHEEL STABILIZER
CRUISER & • Holds tire in place for secure trailering
TOURING • 1” tubing bolts to pickup or trailer 56-6026 56-6027
• Will accommodate tire up to 5”
SEATS & 56-0336
CYCLE COUNTRY ™
$22.89
LUGGAGE REMOVABLE MOTORCYCLE
WHEEL CHOCK
DECALS & • Quick and easy installation with knife thread inserts for
GRAPHICS wooden floors
• All hardware included for removable installation
• Can be permanently mounted if desired, hardware not included
CONTROL • Heavy-duty 1” tubing will accommodate tires 4” to 6” in width
• Made in the USA
SUSPENSION
Easy as • Available in 3 options: black powder-coated with tough
textured finish, silver powder-coated with durable clear coat
1- 2 - 3... finish and rich nickel finish
Description P/N Retail
DRIVE Black Powder-Coated with Tough Textured Finish 56-6026 $38.94
Silver Powder-Coated with Durable Clear Coat Finish 56-6027 41.30
Rich Nickel Finish 56-6028 49.56
BRAKE
ENGINE
1. Set in Place
ELECTRICAL
CHEMICAL
2. Set Rear Straps 3. Strap in Bike
SECURITY
& COVERS Or... simply place EZ Chock against the front
of the truck bed and strap in the bike.
The non-slip rubber pad on the bottom plate
TRAILER &
STANDS ensures the chock stays put!
TOOLS
KURYAKYN®
EZ CHOCK
• EZ Chock design allows the use of the same chock in the truck, ANCHORTRAX
SHOP trailer or toy hauler without additional mounting hardware
SUPPLIES • A chock that goes where your bike goes not the other way PAYLOAD SECURING DEVICE
• Perfect choice for securing your ATV, motorcycle, or cargo in
around your truck bed or trailer
DISPLAY • It’s patented plate and tab strapping design secures your bike • Adjustable tracks make them ideal for a variety of loads
& PROMO in place without the traditional mounting hardware that all • Easy to install: Drilling 2 small holes on each actually
other chocks require strengthens the bed
CROSS • Available in 3 different sizes • Complete kit contains 2-12” tracks, 2 heavy-duty anchors and
REFERENCE Description P/N Retail mounting hardware
3-1/2” (Mfg/N 929) 49-6812 $89.99 Description P/N Retail
1288 5-1/2” (Mfg/N 935) 49-6813 99.99 Complete Kit 21-0783 $41.50
6-1/2” (Mfg/N 936) 49-6814 99.99 Replacement anchors 21-0784 12.50 ea.
EXHAUST
TIRES &
WHEELS
SPORT BIKE
03-0515
ANCRA TRACKSTAR™ WINDSHIELDS
WHEEL CHOCK
• Patented, lock n’ load system using high strength aircraft-style 03-0513 CRUISER &
track provides positive attachment to your bike hauler TOURING
• Designed to fit front tires 3.5” to 5.5” wide PINGEL®
• Reinforced, powder-coated, tubular steel, solid base plate
• Designed to fit standard truck beds and flat floor trailers REMOVABLE WHEEL CHOCK SEATS &
• To install, position chock stud feet into track, press down and slide • Features quick and easy installation and removal, ideal for LUGGAGE
chock forward wood floor
• To remove, pull up on the top mounted “plunger” and slide • Removable chock is made of thick-wall steel tube construction DECALS &
chock out of the track. No tools required with a show chrome finish GRAPHICS
• Additional mounting kit can be ordered separately enabling • Complete with mounting hardware
you to use wheel chock in more than one vehicle/trailer • Mounting hardware remains fastened to floor, chock easily
10-0882 $88.95 removes from hardware when not in use CONTROL
Additional Mounting Kit • Made in the USA
10-0894 $15.99 Description P/N Retail
3-1/2” Inside Width 03-0513 $66.95
SUSPENSION
6-1/2” Inside Width 03-0532 66.95
Extra Mounting Hardware (Pair)
Fits all sizes 03-0515 $25.95
DRIVE
03-0527
BRAKE
ENGINE
PINGEL®
REMOVABLE
WHEEL CHOCK FUEL & AIR
• Chock designed for corrugated floor
• Complete with mounting plate
Description P/N Retail Track
49-8628 Not Included ELECTRICAL
3-1/2” Inside Width 03-0527 $112.95
6-1/2” Inside Width 03-0534 112.95
Mounting Plate - Fits 3-1/2”, or 6-1/2” wheel chocks 03-0533 58.95
CHEMICAL
SECURITY
PINGEL® & COVERS
SERIES E TRACK WHEEL CHOCK SYSTEM
• Allows you to locate your motorcycle anywhere along the track TRAILER &
for best position STANDS
• Multiple motorcycles can now be quickly and easily installed in
your trailer with optimum space utilization
PINGEL® • With Series E Track already in place, there is no further TOOLS
hardware to install
PERMANENT • Installation is easy: 2 clips and a pull of a strap and your chock
MOUNT WHEEL CHOCK is secured SHOP
• Bolts directly to the floor of any truck, van or trailer • Installs securely in both recessed and floor mounted Series E Tracks SUPPLIES
• Features lustrous chrome-plated, heavy-duty, thick wall steel • Features a heavy-duty, thick-wall steel, construction plated with
construction a lustrous chrome finish, durable aluminum mounting plate and DISPLAY
• Includes mounting bolts, nuts and washers quality fasteners & PROMO
• Made in the USA • Patent pending
Description P/N Retail • Wheel chock only, track not included
Fits tire widths up to 3-1/2” 03-0572 $42.95 Description P/N Retail CROSS
Fits tire widths from 5-3/4” to 6-1/2” 03-0574 56.79 Fits Tire Widths up to 3-1/2” Recess Mount 49-8628 $154.95 REFERENCE
Fits Tire Widths up to 6-1/2” Recess Mount 49-8629 154.95
Fits Tire Widths up to 3-1/2” Floor Mount 49-8630 154.95 1289
Fits Tire Widths up to 6-1/2” Floor Mount 49-8631 154.95
EXHAUST
TIRES &
WHEELS
SPORT BIKE
WINDSHIELDS
CRUISER &
TOURING
SEATS &
LUGGAGE QUADBOSS
BI-FOLD RAMPS
DECALS & • High value, all-purpose bi-fold ramp
GRAPHICS • Featherlite but tough as nails
• 5” rung spacing
• Aircraft aluminum construction
CONTROL • Tiedowns included (attached to ramps)
• Soft, black plastic holding finger covers to protect truck bed QUADBOSS
• 1250 lb. capacity
SUSPENSION • SECURITY STRAPS INCLUDED AND ARE REQUIRED WHEN ADJUSTABLE RAMPS
USING PRODUCT • High value, all-purpose adjustable ramp
Capacity • Featherlite but tough as nails
Bi-Fold Ramp Dimensions (lbs.) P/N Retail • 5” rung spacing
DRIVE • Aircraft aluminum construction
44”W x 71”L Pallet of 10 1,250 40-3476 $149.00 ea.
48”W x 71”L Pallet of 10 1,250 40-3477 199.99 ea. • Tiedowns included (attached to ramps)
46”W x 81”L Pallet of 10 1,250 40-3478 269.99 ea. • Soft, black plastic holding finger covers to protect truck bed
BRAKE
12”W x 89”L (Pair) Pallet of 10 2,500 40-3491 419.99 • 1250 lb. capacity
Mix-N-Match Pallet 1,250 40-34811 • 42-52” x 76” open
1
10-15 Ramps from above sizes also includes Adjustable Ramp (40-3479). Must fill out • 14” x 76” x 5.5” folded
ENGINE SO form • SECURITY STRAPS INCLUDED AND ARE REQUIRED WHEN
USING PRODUCT
Capacity
FUEL & AIR Adjustable Ramp Dimensions (lbs.) P/N Retail
42-52”W x 76”L Pallet of 10 1,250 40-3479 $214.99 ea.
ELECTRICAL
CHEMICAL
SECURITY
& COVERS
TRAILER &
STANDS PRAIRIE VIEW
BAD BOY
TOOLS MOTORCYCLE RAMP
• High-strength, lightweight aluminum
• Skid-resistant surface
QUADBOSS ATV
SHOP • Full platform for stability and footing DISPLAY/WORK STAND
SUPPLIES • Great for displaying or working on
• Folds in half for compact storage
• 2 handles for carrying any ATV
DISPLAY • 1-1/2” curb for edge protection • 2,000 lb. total capacity
& PROMO • Folded dimensions: 55” x 36” x 6” • Adjustable height max 24” deck and
• Weight: 68 lbs. width of 54-60”
CROSS • Special order only • Ships UPS
REFERENCE Capacity • Plastic tips protect floor
Dimensions Mfg/N (lbs.) P/N Retail • Loading ramps not included, may be
1290 96” x 36” x 4” BB836 1200 15-0903 $559.95 ordered separately
56-0061 $451.52
EXHAUST
TIRES &
WHEELS
SPORT BIKE
WINDSHIELDS
56-0053 56-0052 56-0055
CRUISER &
TOURING
SEATS &
LUGGAGE
DECALS &
GRAPHICS
QUADBOSS 15-5-5-5-5-5 PALLET DEAL
• Convenient way to stock up on a mix of QuadBoss ramps
• Order 1 and receive: 15 of part number 56-0050 and CONTROL
5 each of part numbers 56-0051, 56-0052, 56-0053,
56-0093 and 56-0055
• Drop shipped from factory, freight paid
SUSPENSION
56-0058 • Saves money when compared to buying individually
56-0326 $139.99-229.99
DRIVE
QUADBOSS ALUMINUM ATV RAMPS QUADBOSS 10-5-5 PALLET DEAL
• Made in USA with 6063T5 aluminum billet • Convenient way to stock up on a mix of QuadBoss ramps
• .07” wall thickness • Order 1 and receive: 10 of part number 56-0050 and BRAKE
• Robotically welded 5 each of part numbers 56-0051 and 56-0052
• 10-year manufacturer’s warranty • Drop shipped from factory, freight paid
against defects ENGINE
• Saves money when compared to buying individually
• Lightweight with vinyl-coated tips 56-3056
• 1,500 lb. capacity on all folding ramps 56-0327 $139.99-219.99
• 1,500 lb. total capacity on arched
ramp when used as pairs FUEL & AIR
• Dealer can save money by buying by the pallet QUADBOSS CUSTOM PALLET
• SECURITY STRAPS INCLUDED AND ARE REQUIRED • Convenient way to stock up on a mix of QuadBoss ramps
WHEN USING PRODUCT • Order 1 and receive 10-20 ramps that you choose from part ELECTRICAL
Capacity
Bi-Fold Ramp Dimensions (lbs.) P/N Retail numbers 56-0050, 56-0051, 56-0093, 56-0053, 56-0055
44”W x 71”L 1,500 56-0050 $149.99 and 56-0328
44”W x 71”L Pallet of 10 1,500 56-0320 1412.99 ea. • Drop shipped from factory, freight paid CHEMICAL
41”W x 81”L Extra Long 1,500 56-0051 212.99 • Saves money when compared to buying individually
41”W x 81”L Extra Long, Pallet of 10 1,500 56-0321 2037.99 ea. 56-0393 $139.99-229.99
50”W x 72”L Extra Wide 1,500 56-0052 252.99 SECURITY
50”W x 72”L Extra Wide, Pallet of 10 1,500 56-0322 2550.99 ea. & COVERS
50”W x 81”L 1,500 56-00934 271.99
50”W x 81”L Pallet of 10 1,500 56-0058 2674.99 ea. QUADBOSS UTILITY RAMP
Tri-Fold Ramp Dimensions • With the introduction by Yamaha of the Rhino Side by Side TRAILER &
50-3/4”W x 71” Unfolded, 1,500 56-0053 $238.99 units that are being rolled off the trucks (instead of crated), STANDS
17” x 71” x 5” Folded this ramp will be an important part of your operation as
50-3/4”W x 71”L Pallet of 10 1,500 56-0323 2359.99 ea. Yamaha requires dealers to have a ramp or loading dock to
Capacity TOOLS
off-load fully assembled Rhinos
Arched Ramp Dimensions (lbs.) • Each Ramp dimensions: 178” x 16”; Sold as a pair; Security
12”W x 89”L 1,500 56-00551,2 $241.99 Straps included; 2000 lbs. load capacity when used as a pair
12”W x 89”L 750 56-0054 129.99 SHOP
12”W x 89”L Pallet of 10 1,500 56-03243 2292.99 ea. and cut in half when using single ramp SUPPLIES
18”W x 88”L UTV 2,400 56-03281 252.99 ea. • Dealer cost includes freight
18”W x 88”L UTV Folding Pallet of 10 pair 2,400 56-03251,3 5165.50 pr. 56-0079 $1309.99 DISPLAY
& PROMO
Replacement Security Straps
Each 56-3056 $6.60 QUADBOSS ACCESSORY VINYL TIPS
1
Total capacity is rated using pair of ramps; Capacity is cut in half when using single ramp • Adds tailgate protection CROSS
2
Order 1 and receive 1 PAIR of ramps • Order individually, 4 are required REFERENCE
3
Order 1 and receive 10 PAIRS of ramps per ramp
4
This part can only be ordered with another pallet of QuadBoss ramps being drop shipped 56-0048 $1.49 1291
directly to the dealer. Qualified P/N’s 56-0320, 56-0321, 56-0322, 56-0323 and 56-0324
EXHAUST
TIRES &
WHEELS
56-0092
SPORT BIKE
WINDSHIELDS 56-0070
OXLITE® “DRESSER” TRIFOLD RAMP
• UPS shippable, when ordered individually
CRUISER & • 5-year manufacturer’s warranty against defects
TOURING • 9 rubber tip fingers for tailgate OXLITE® ARCHED RAMPS
• UPS shippable, when ordered individually
• Arch design prevents dragging • 5-year manufacturer’s warranty against defects
SEATS & • Side panels detach • Sold as a pair unless noted
LUGGAGE • SECURITY STRAPS INCLUDED AND ARE REQUIRED • Dealer can save money by buying by the pallet
WHEN USING PRODUCT • SECURITY STRAPS INCLUDED AND ARE REQUIRED
Capacity WHEN USING PRODUCT
DECALS &
GRAPHICS
Dimensions Mfg/N (lbs.) P/N Retail Capacity
36”W x 94”L 11652 1,500 56-0092 $520.99 Dimensions Mfg/N (lbs.) P/N Retail
12”W x 89”L 73252 (pair) 1,0001 56-01162 $230.99
CONTROL 12”W x 89”L 13983 (pair) 1,5001 56-00702 285.99
12”W x 89”L 14983 (each) 750 56-0062 149.99
12”W x 89”L Folding Ramp 12982 (pair) 1,0001 56-00832 335.99
18”W x 94”L Folding 12650 1,000 56-0117 3
384.99
SUSPENSION
Rubber Replacement Tips (pack of 6) 56-0063 19.95
1
Total capacity using pair of ramps, capacity is cut in half when used individually.
2
Order 1 and receive 1 PAIR of ramps
DRIVE 3
For a pair order qty of 2
56-0305
TOOLS
TRAVELRITE BI-FOLD AND
TRI-FOLD RAMPS
• Ships UPS when ordered individually
SHOP • Includes security cable
SUPPLIES • SECURITY CABLES ARE INCLUDED AND ARE REQUIRED WHEN
RAMP IS USED. NEVER USE RAMP WITHOUT CABLES
DISPLAY Bi-Fold Ramps Capacity
& PROMO Dimensions Construction Mfg/N (lbs.) P/N Retail
PRAIRIE VIEW INDUSTRIES 41”W x 70”L Steel 6005 1,000 59-0029 $153.95
CROSS
LOADING RAMPS Tri-Fold Ramps
43”W x 70”L Steel 6002 1,000 59-0047 $153.95
REFERENCE • Made from top-quality aluminum
• Unfolds to 6’x46”, folded size is 23.5”x40” 43”W x 84”L Steel 6003 1,000 59-0048 183.95
• Handles loads up to 1,000 lbs. 45”W x 70”L Aluminum 6020 1,500 59-0049 214.95
1292 15-0900 $259.95 45”W x 84”L Aluminum 6021 1,200 59-0050 244.95
EXHAUST
ROLLASTAND WINDSHIELDS
• Designed for bikes without center-stands
• Easily clean front and back wheels
• Easy 1-person operation CRUISER &
• Powder-coated finish TOURING
ALUMINUM PRAIRIE VIEW INDUSTRIES • Sealed bearings
• Works great for bearing and
MOTORCYCLE RAMP LOADING RAMP shim alignment
SEATS &
LUGGAGE
• Excellent for loading in truck • Made from top-quality aluminum
• Sport Bikes or Cruisers
• 600 lb. load capacity • Motorcycle ramp is 12” wide by 8 ft.
Application P/N Retail DECALS &
• Measures 5’ 9” x 6” long unfolded, or 53” folded
Sport Bike 21-6079 $49.95 GRAPHICS
• Ships UPS (not oversized) • 1,000 lb. load capacity
Cruisers 21-6080 64.95
59-0027 $53.95 15-0901 $209.95
CONTROL
SUSPENSION
DRIVE
BRAKE
ENGINE
MSR® ACERBIS
PRO-LIFT STAND BIKE STAND
• Sturdy, aluminum, reinforced construction • 2 tool trays molded into the stand FUEL & AIR
• Pedal mechanism for a quick and easy lift of your vehicle • Flip it over and carry more stuff
• Tough, rubber top platform for positive traction • 17” high
34-0008 $114.95 73-6046 $84.95
ELECTRICAL
CHEMICAL
SECURITY
& COVERS
TRAILER &
STANDS
BikeMaster®
UNIVERSAL REAR STAND TOOLS
• Universal rear stand fits most
double-sided swingarm applications BikeMaster ®
• Folding design for compact storage SHOP
• Comes with aluminum sliding UNIVERSAL ROLL-ON STAND SUPPLIES
adjustable distance Spool Type • Universal roll-on stand fits all motorcycles
lift points • Tipping point design insures that the weight of the bike holds it
firmly between the vertical stop DISPLAY
• 4 rubber bumbers between tubes & PROMO
and floor, allow for easy pick up • Adjustable for both height and wheel diameter
• Powder-coated paint for long-lasting good looks • Durable and lightweight steel design
• Extra reinforcement hoop at handle end for strength over other • Powder-coated paint for long lasting good looks CROSS
open hoop designs • Dismantles for compact storage REFERENCE
• Extra strength wheels • Perfect for track or shop use
15-1571 $99.95 15-1573 $149.95 1293
EXHAUST
TIRES &
WHEELS
SPORT BIKE
WINDSHIELDS
DRIVE
BRAKE
HARDLINE
ENGINE UFO ® MOTOSLIDE
BIKE CRATE BIKE STAND 360 WHEEL DOLLY
• Slides bike into any tight space
• Heavy-duty plastic construction • Super tough molded plastic • Works great for storage
FUEL & AIR • High enough to support all bikes • Easy-carry handles • Use on any motorcycle
• Great for carrying oil etc. • Height 16.4” • Roll on and off
34-1035 $22.99 11-9999 $85.99 • Low profile - will not tip over
ELECTRICAL • Corrosion resistant
21-6082 $69.95
CHEMICAL
SECURITY
& COVERS
TRAILER &
STANDS
27-3887
TOOLS
FMF TORIN BIG RED™
SHOP
FMF PODIUM BIKE STAND MOTORCYCLE JACK
SUPPLIES • Lightweight anodized aluminum • Folds for easy and convenient storage
STEP-UP BIKE STAND construction • Use tiedown straps to secure
DISPLAY • Lightweight cast aluminum platform that • FMF logos on all 4 sides • Maximum capacity: 1500 lbs.
& PROMO won’t flex or bend • Available in minibike and big bike • Lifting range: 5.125” x 16.625”
• Rubber topped platform is adjustable sizes • 360˚ locking swivel casters
CROSS • Extends from 12.5” to 16” so it’s great • 4 pack also available • 6 locking positions
REFERENCE for mini’s or the big 4-strokes Description P/N Retail • Handle included for easy movement
• Takes about 5 minutes to assemble and Stand (Single) 27-3887 $79.95 • Replaceable bottle jack included
1294 27-3863can be taken apart if needed Stand (4 pk) 27-3888 79.95 Description P/N Retail
$84.95 Stand (Mini) 27-3889 79.95 Single 59-9335 $185.95
EXHAUST
K&L MC15R CYCLE DOCK
• The MC15R Cycle Dock self locking clamp allows one
person to load and unload a motorcycle in a trailer, TIRES &
pickup truck or on a service lift WHEELS
• The pivot mechanism uses the weight of the bike to hold
itself upright, leaving your hands free to secure the bike. It
SPORT BIKE
is simple in design and ruggedly built
• Use the supplied mounting rails to mount the Dock into a
trailer or pickup truck
• The rails mount to the deck WINDSHIELDS
so you can slide the Dock out
leaving just the mounting rails
CRUISER &
behind, this frees up your truck TOURING
or trailer for other uses
• The kit comes with 2 mounting rails
• UPS shippable SEATS &
Note: Tie-Downs recommended LUGGAGE
29-3105 $278.99
DECALS &
GRAPHICS
13” 13-1/2”
CHEMICAL
3-1/2” SECURITY
& COVERS
K&L MC455
TRAILER &
FAT JACK & MC464 FAT JACK DOLLY STANDS
• Everything you like about the MC450 and more
• Fat Jack’s wider deck with rubber non-skid pad increases your
lifting area for increased stability 4”
TOOLS
• The MC464 Fat Jack Dolly is for shops that already own the
MC455
• It’s sturdy casters allow you to move bikes easily, with the SHOP
stability you need SUPPLIES
• UPS shippable
NOTE: Do not use air/impact guns to raise and lower the DISPLAY
MC455 & PROMO
Minimum Height: 3-1/2”, Maximum Height: 13”
Dimensions: 16”(405mm) Length x 10”(255mm) Width CROSS
Maximum Height: 13”(330mm). Base Width: 14”(355mm) REFERENCE
Description P/N Retail
K&L MC455 Fat Jack 29-3075 $310.99 1295
K&L MC464 Fat Jack Dolly 29-3076 122.99 29-3075 and 29-3076
EXHAUST
TIRES &
WHEELS
SPORT BIKE
WINDSHIELDS
CRUISER &
TOURING
SEATS &
LUGGAGE
CONTROL
29-3073
SUSPENSION
DRIVE
29-3072 29-3073
BRAKE
ENGINE
ELECTRICAL
K&L K&L
CHEMICAL MC40 UNIVERSAL FRONT WHEEL STAND MC45 UNIVERSAL SWINGARM STAND
• The MC40 heavy-duty front end stand from K&L Supply • Our MC45 heavy-duty universal swingarm stand comes with
features a pendulum type design which keeps the adapters in fully adjustable adapters, and accommodates both spool and
SECURITY place every time you use it swingarm designs
& COVERS • Handle is removable and the adapters are adjustable from side • The MC45 gives great stability in use; the removable handle
to side for a more universal fit allows freedom of movement after the bike is raised
TRAILER & 29-3072 $154.99 29-3073 $163.99
STANDS
TOOLS
SHOP
SUPPLIES
DISPLAY
& PROMO
CROSS
REFERENCE
1296
EXHAUST
TIRES &
WHEELS
A B C D E F G H I J K L M N O P
SPORT BIKE
CONTROL
STS STANDS
SUSPENSION
STS STRAPLESS TRANSPORT STAND
DRIVE
REAR STANDS
The Strapless Transport Stand works by way of a stainless steel
rod inserted into the hollow rear axle of most modern sportbikes.
The steel rod is then captured in the Strapless Transport Stand
BRAKE using slide locks, allowing the bike to ride on its own suspension.
The Strapless Transport Stand is removable in seconds, using two
mounting plates that bolt to the floor, just slide the stand into place
ENGINE and engage the locking mechanism.
• Stand is removable
• No tie-downs, no wheel chocks
FUEL & AIR • No stress on suspension parts
• 100% rigid mounting
• Allows for bikes to be placed closer to walls or other bikes
ELECTRICAL • Easy loading and unloading
59-9920 $200.00
EXHAUST
TIRES &
WHEELS
SPORT BIKE
HARRIS PERFORMANCE
REAR PADDOCK WINDSHIELDS
STAND-SPOOL HARRIS PERFORMANCE
• Made from high quality stainless steel tube incorporating a
“1-piece” structure SINGLE SIDED PADDOCK CRUISER &
• High load nylon wheels provide a “roll-on” application STAND-RIGHT HAND ENTRY TOURING
• Prong fittings are adjustable to accommodate different • Made from high quality stainless steel tube incorporating a
swingarm widths “1 piece” structure
NOTE: Suitable swingarm spools must be purchased separately SEATS &
• A sealed roller bearing is incorporated into the spigot design LUGGAGE
20-2679 $176.00 allowing the wheel to be spun when the stand is in use
• The spigot is supplied with a through bolt, preventing the sport
bike from slipping off of it DECALS &
GRAPHICS
• High load nylon wheels provide a “roll-on” application
• Used for all “right entry” single sided swingarm applications
• Comes standard with the correct pin kit for the BMW “R” series CONTROL
and HP2 Enduro bikes
20-2043 $390.85
SUSPENSION
HARRIS PERFORMANCE
REAR UNIVERSAL
PADDOCK STAND DRIVE
• Made from high quality stainless steel tube incorporating a
“1-piece” structure
• High load nylon wheels provide a “roll-on” application BRAKE
• Swingarm cups are made from mild steel and are also coated
to prevent swingarm damage
• Cups are adjustable to accommodate different swingarm widths
20-2678 $176.00 ENGINE
HARRIS PERFORMANCE
FRONT UNIVERSAL PADDOCK STAND FUEL & AIR
• 1-piece, welded structure supplied with all necessary fixtures
and fasteners
• Satin finished, stainless steel with mild steel, zinc-plated
ELECTRICAL
swing plates
• Swing plates are sleeved with anti-scuff PVC
• Provides enough clearance for wheel cleaning and removal
HARRIS PERFORMANCE • Slides easily under the fork legs CHEMICAL
SINGLE SIDED PADDOCK STAND 20-2676 $182.85
• Made from high quality stainless steel tube incorporating a
“1-piece” structure SECURITY
• A sealed roller bearing is incorporated into the stand allowing & COVERS
various size aluminum spigots to be inserted
• Bearing arrangement also allows the wheel to be spun when TRAILER &
the stand is in use HARRIS PERFORMANCE STANDS
• The spigot is supplied with through bolt, preventing the sport FOOTREST SUPPORT
bike from slipping off the spigot
• Used for all “left entry” single sided swingarm applications STANDS TOOLS
NOTE: Proper rear wheel pin kit must be purchased separately • Made from high quality stainless
20-2680 $390.85 steel tubing
• Designed to be used in conjunction SHOP
Single Sided Stand Pin Kit
AGUSTA P/N Retail with a fixed footrest peg SUPPLIES
MV Augusta F4 20-2032 $42.95 • Allows easy removal of the rear
BMW swingarm
DISPLAY
BMW K1200R/S 20-2030 $42.95 • Offers height adjustability & PROMO
BMW R1200GS/ST/RT 20-2031 42.95 20-2667 $132.00
DUCATI
Ducati 748/916/996 20-2027 $42.95 CROSS
HONDA REFERENCE
Honda VFR750/800 20-2028 $42.95
TRIUMPH 1299
Triumph T509/595 20-2029 $42.95
EXHAUST
TIRES &
WHEELS
SPORT BIKE
WINDSHIELDS
SUSPENSION
CROSS
REFERENCE
1300
EXHAUST
TIRES &
WHEELS
67-4504
SPORT BIKE
WINDSHIELDS
67-4503
BIKE-LIFT ® FRONT STAND 9
• Universal front stand
CRUISER & • 1 piece tube design
TOURING • Powder-coated for added protection
• Fits under the front forks
SEATS & 67-4525 $56.95 67-4506
LUGGAGE
ELECTRICAL
CHEMICAL
SECURITY 67-4520
& COVERS
EXHAUST
TIRES &
WHEELS
SPORT BIKE
67-4508 67-4509
WINDSHIELDS
DRIVE
67-4516
BRAKE
67-4515 67-4501
67-4500
ENGINE
TOOLS
SHOP
SUPPLIES
DISPLAY
& PROMO
CROSS
REFERENCE
1303
EXHAUST
TIRES &
WHEELS
SPORT BIKE
WINDSHIELDS
VALENTINO MAX
CRUISER &
TOURING
REAR POWERSTAND
• Spool/Non-spooled with removable handle
VALENTINO MICK • Adjustable width, guaranteed to fit sportbikes with conventional
SEATS & FRONT FORK POWERSTAND
LUGGAGE • Fork-lift front with removable handle
swingarms
• Quick-release, removable handle for show/sales floor bike display
• Quick-release, removable handle for show/sales floor bike display • Rubberized V prevents accidental scratch to any part of the bike
DECALS & • Rubberized hardware helps prevent accidental scratch to any part • Large rubber blocks with grooved surface for non-spooled
GRAPHICS of the bike application
59-0010 $139.99 59-0009 $139.99
CONTROL
SUSPENSION
DRIVE
BRAKE
MARIO EUROPEAN
REAR POWERSTAND
ENGINE MARCO EUROPEAN • Single-sided swingarm stand
FRONT POWERSTAND • 5 axle pins for Ducati, Honda, Triumph and MV
• Ducati speciality triple tree/fork lift stand • Left and right side reversible allows easy rear wheel/sprocket/
FUEL & AIR • Special “hook” hardware to lift Ducati superbikes without a chain maintenance/removal
hole in its lower triple tree • Quick-release, removable handle for show/sales floor bike display
• Converts to a fork-lift stand • Quick-release axle pin design for fast pin interchangeability
ELECTRICAL 59-0008 $199.00 59-0007 $189.00
CHEMICAL
SECURITY
& COVERS
TRAILER &
STANDS
EXHAUST
TIRES &
WHEELS
SPORT BIKE
WINDSHIELDS
GILLES TOOLING
KTS CHAIN ADJUSTER ACCESSORIES CRUISER &
TOURING
• Machined from high-grade aircraft aluminum AL7075
• Attaches to any Gilles chain adjuster offering that professional, MotoGP look
• Provides a convenient way of raising your bike on paddock stands SEATS &
• Can be used with Harris Performance factory style stand TR# 20-2042 LUGGAGE
Description Black Blue Gold Red Titanium Retail
Swingarm Lifter 63-5085 63-5086 63-5087 63-5088 63-5089 $67.36 DECALS &
Jack Bolt 20x20 L=135 63-5090 26.95 GRAPHICS
Jack Bolt 12x100 63-5091 26.95
Jack Bolt US 12x100-drill hole
for pins Ø 3mm 63-5092 26.95 CONTROL
SUSPENSION
DRIVE
GILLES TOOLING
TECA-GT CHAIN ADJUSTERS BRAKE
• Unique and innovative chain adjuster
• High precision chain adjustments by an angular transmission
• Precise positioning by a graded-scale ENGINE
• Rear wheel position can be read off in “mm” increments
• Easier rear wheel installation
• Braces the axle against compressive and tensile load
FUEL & AIR
• Easy installation
• Available in these hard anodize colors: Black, gold and titanium
• Optional swingarm lifter, crash pad and stand bolts are available and
must be purchased separately ELECTRICAL
HONDA Year Black Gold Titanium Retail YAMAHA Year Black Gold Titanium Retail
CBR600RR 05-08 63-3400 63-3401 63-3402 $221.36 YZF R1 07-09 63-3406 63-3407 63-3408 $221.36
CHEMICAL
CBR1000RR 04-08 63-3400 63-3401 63-3402 221.36
ACCESSORIES Color P/N Retail
SUZUKI Crash Pad Set Black 63-3409 $56.84 SECURITY
GSXR600 06-08 63-3403 63-3404 63-3405 $221.36 Teca Swingarm Lifter Set Black 63-3410 56.84 & COVERS
GSXR750 06-08 63-3403 63-3404 63-3405 221.36 Gold 63-3411 56.84
GSXR1000 05-08 63-3403 63-3404 63-3405 221.36 Titatanium 63-3412 56.84
TRAILER &
Jack Bolt 12X100 Silver 63-5091 26.95 STANDS
Jack Bolt 20X20L-135 Silver 63-5090 26.95
TOOLS
SHOP
SUPPLIES
DISPLAY
& PROMO
CROSS
REFERENCE
1305
EXHAUST
TIRES &
WHEELS
POWERSTANDS POWERPLATFORM
• Heavy-duty mild steel construction with a weight
SPORT BIKE capacity of 500 lbs.
• Portable folding design, great for setting up anywhere
• Height adjustable table legs to accommodate any uneven
WINDSHIELDS garage surface
• Built in carrying handle for ease of handling
• UPS shippable packaging at OS2 70 lbs.
CRUISER & • Table dimensions 24” W x 88” L x 18” H
TOURING • Black powder-coated finish
• Removable front wheel stopper
SEATS & • Ramp not included
LUGGAGE 59-0016 $279.99
DECALS &
GRAPHICS
CONTROL
SUSPENSION
DRIVE
POWERSTANDS POWERCHOCK
• Heavy-duty mild steel construction
BRAKE
• Self locking mechanism holds motorcycle in place
• Universal design to fit sportbike tire sizes 120/60/17,
120/65/17 and 120/70/17
ENGINE • 4 mounting holes for anchoring bolts and can be mounted on
top of PowerPlatform
• 2 openings for tie downs
FUEL & AIR • Locking tab with quick release pin for added security
• Durable and low maintenance powder-coated finish same as
PowerPlatform
ELECTRICAL • Assembles easily in minutes
59-0011 $139.00
CHEMICAL
SECURITY
& COVERS
TRAILER &
STANDS
TOOLS
POWERSTANDS POWERJACK
SHOP ADJUSTABLE SERVICE JACK STANDS
SUPPLIES • Holds bike up via footpeg bracket or frame sliders
• Height adjustment with quick release spring loaded pin
• Triple reinforced design for life time heavy-duty usage
DISPLAY • Compact dimension for easy transportation and storage
& PROMO
• Allows complete front end or rear end removal
• Must have for suspension adjustment or service
CROSS • Sold in set of two
REFERENCE 58-9989 $139.00
1306