Documente Academic
Documente Profesional
Documente Cultură
The entropy of a pure crystalline substance increases with increase of temperature, because molecular motion increases with increase of temperature and vice - versa.
Or the entropy of a perfectly crystalline solid approaches zero as the absolute zero of temperature is approached. This is third law of thermodynamics.
THERMOCHEMISTRY
The branch of chemistry which deals with energy changes involved in chemical reactions is called thermochemistry. The energy change that occurs in a chemical reactions is largely due to change of bond energy.
Let us consider a chemical reaction taking place at constant temperature and at constant volume. In such a case, w = 0 and hence from the first law
U = qv
Where qv is the heat exchanged at constant volume, or heat or enthalpy of reaction at constant volume.
Let qP be the heat exchanged in the chemical reaction taking place at constant pressure, Then evidently,
Reaction that give out heat, i.e. which are accompanied by evolution of heat, are called exothermic reaction. In such reactions H is negative. On the other hand, reaction that intake heat, i.e. which are accompanied by absorption of heat are called endothermic reactions. In these reactions H is positive.
Solution:
(ii) Exothermic
(iii) Endothermic
Enthalpy of reaction
It is the enthalpy change taking place during the reaction when the number of moles of reactants and products are same as the stoichiometric coefficient indicates in the balanced chemical equation. The enthalpy change of the reaction depends upon the conditions like temperature, pressure etc under which the chemical reaction is carried out. Therefore, it is necessary to select the standard state conditions. According to thermodynamics conventions, the standard state refers to 1 bar pressure and 298 K temperature. The enthalpy change of a reaction at this standard state conditions is called o standard enthalpy of the reaction.(H )
(i) Enthalpy of formation: Enthalpy change when one mole of a given compound is formed from its elements.
H = 890.36 kJ / mol
Exercise.
H = 92.4 KJ
H = 74.8 KJ
H1 (H (aq)) = 0.0 KJ
(ii) Enthalpy of combustion: Enthalpy change when one mole of a substance is burnt in oxygen.
H = 890.36 kJ / mol
Exercise.
The heat liberated on complete combustion of 7.8 g benzene is 327 KJ. This heat has been measured at constant volume and at 27C. Calculate heat of combustion of benzene at constant pressure at 27C.
(iii) Enthalpy of Neutralization: Enthalpy change when one equivalent of an acid is neutralized by a base or vice versa in dilute solution. This is constant and its value is 13.7 kcal for neutralization of any strong acid by a base since in dilute solutions they completely dissociate into ions.
H = 13.7 kcal
For weak acids and bases, heat of neutralization is different because they are not dissociated completely and during dissociation some heat is absorbed. So total heat evolved during neutralization will be less.
H = 2.9 kcal
Heat of ionization in this reaction is equal to (2.9 + 13.7) kcal = 10.8 kcal
Solution: (A) Since heat of neutralization of strong acid and strong base is equal to the heat of formation of water.
(iv) Enthalpy of hydration: Enthalpy of hydration of a given anhydrous or partially hydrated salt is the enthalpy change when it combines with the requisite no.of mole of water to form a specific hydrate. For example, the hydration of anhydrous copper sulphate is represented by
H = 18.69 kcal
SOLVED EXAMPLE. Ionisation energy of Al = 5137 kJ mole (H) hydration of Al = 4665 kJ 1 1 mole . (DH)hydration for Cl = 381 kJ mole . Which of the following statement is correct
3+
Solution:
3+
3+
(v) Enthalpy of Transition: Enthalpy change when one mole of a substance is transformed from one allotropic form to another allotropic form.
H = 1.9 kJ/mol
Solved example. The heat of transition for carbon from the following is
Solution:
Given
H = 94.3 kcal/mole
(1)
CD CA > 0;
H = +3.3 kcal/mole
CD > CA
H = +3.3 kcal/mole
(B)
Solved example. From the reaction P(white) > P (Red): H = - 18.4 kJ, It follows that
(D) White P can be converted into red P and red P is more stable
Solution:
(D)
HESSS LAW
This law states that the amount of heat evolved or absorbed in a process, including a chemical change is the same whether the process takes place in one or several steps.
Suppose in a process the system changes from state A to state B in one step and the heat exchanged in this change is q. Now suppose the system changes from state A to state B in three steps involving a change from A to C, C to D and finally from D to B. If q1, q2 and q3 are the heats exchanged in the first, second and third step, respectively then according to Hesss law
q1 + q2 + q3 = q
Hesss law is simply a corollary of the first law of thermodynamics. It implies that enthalpy change of a reaction depends on the initial and final state and is independent of the manner by which the change is brought about.
Sample problem.
Solution:
H = H1 + H2 + H3
Sample problem.
DH = + 890.36 kJ / mole
Solution:
H = + 890.36 kJ / mole
Exercise .
H = 26.4 Kcals
H =?
(ii) What is heat evolved using neutralisation of HCN by a strong base? Heat of ionization of HCN is 10.8 Kcal.
There are large number of compounds such as C6H6, CO, C2H6 etc whose direct synthesis from their 0 constituent element is not possible. Their H f values can be determined indirectly by Hesss law. e.g. 0 let us consider Hesss law cycle for CO2 (g) to calculate the H f of CO(g) which can not determined otherwise.
H1 = ?
H2 = 283 KJ/mole
H1 = 0393 KJ/mole
H3 = H1 + H2 or H1 = H3 H2
From the knowledge of the standard enthalpies of formation of reactants and products the standard enthalpy of reaction can be calculated using Hesss law.
H = [sum of statndard enthalpies of formation of products] [sum of standard enthalpies of formation of reactants]
BOND ENERGY
Bond energy for any particular type of bond in a compound may be defined as the average amount of energy required to dissociate one mole, viz Avogadros number of bonds of that type present in the compound. Bond energy is also called the enthalpy of formation of the bond.
Calculation:
For diatomic molecules like H2, O2, N2, HCl, HF etc, the bond energies are equal to their dissociation energies. For polyatomic molecules, the bond energy of a particular bond is found from the values of the enthalpies of formation. Similarly the bond energies of heteronuclear diatomic molecules like HCl, HF etc can be obtained directly from experiments or may be calculated from the bond energies of homonuclear diatomic molecules.
Sample problem. Calculate the bond energy of HCl. Given that the bond energies of H2 and Cl2 are -1 -1 0 -1 430 KJmol and 242 KJ mol respectively and H f for HCl is -91 KJ mol .
Solution:
H = +430 KJmol
...(i)
H = +242 KJmol
...(ii)
H = ?
...(iii)
H = 427 KJ mol
-1
Sample problem.
Given that
2H2(g) + O2(g) > H2O(g) , DH = 115.4 kcal the bond energy of HH and O = O bond respectively is 104 kcal and 119 kcal, then the OH bond energy in water vapour is
(D) None
Solution:
Sample problem. Given the bond energies of N N, H H and N H bonds are 945, 436 and 391 kJ/mol respectively, the enthalpy of the reaction.
(A) 93kJ
(B) 102kJ
(C) 90kJ
(D) 105kJ
Solution:
(A)
Exercise.
Estimate the average S F bond energy in SF6. The values of standard enthalpy of formation of SF6(g), SF(g) and F(g) are 1100, 275 and 80 KJ/mole respectively.
The change in enthalpy that occurs when 1 mole of a solid crystalline substance is formed from its gaseous ions, is known as Lattice energy.
Step 1:
H1 = sublimation
Step 2:
H2 = Dissociation energy
Step 3:
H3 = (Ionization energy)
Step 4:
H4 = Electron affinity
Step 5:
M (g) and X (g) get together and form the crystal lattice
H5 = lattice energy
H1 + 1/2 H2 + H3 + H4 + H5 = Hf (MX)
On putting the various known values, we can calculate the lattice energy.
Sample problem.
What is the expression of lattice energy (U) of CaBr 2 using BornHaber cycle?
Solution:
Sample problem.
CH4(g) + 2O2(g)
CO2(g) + 2H2O(l)
Solution:
H = E + nRT
H = E 2RT
Sample problem.
Solution:
Sample problem. The lattice energy of solid NaCl is 180 kcal/mole. The dissolution of the solid in water in the forms of ions is endothermic to the extent of 1 kcal/mol. If the solution energies of + + Na and Cl are in the ratio 6:5, what is the enthalpy of hydration of Na ion?
Solution:
(B)
Exercise .
(i) For a system C(s) + O2(g) = CO2(g) which of the following is correct: