Documente Academic
Documente Profesional
Documente Cultură
While troubleshooting a connectivity issue between two directly connected routers, the
network administrator checks the encapsulation settings on the serial interfaces of both
routers. Which layer of the OSI model is the administrator troubleshooting?
A. application layer
B. network layer
C. data link layer
D. physical layer
2. How many host addresses can be assigned in each subnetwork when using network
address 172.16.0.0 with subnet mask 255.255.252.0?
A. 256
B. 510
C. 512
D. 1022
E. 024
3. What will a router do with a packet that is destined for a host with the IP address
192.168.1.5/24 if no entry for the 192.168.21.0/24 network exists in the routing table?
A. It will broadcast the packet out of all of its active interfaces that received the packet.
B. It will send the packet back to the source address.
C. It will drop the packet.
D. It will broadcast the packet out of all of its active interfaces.
4. Which statement correctly describes the difference between HTTP and HTTPS?
A. The maximum number of simultaneous connections that a server can support for
HTTPS is more than for HTTP.
B. HTTPS and HTTP use different client request-server response processes.
C. HTTPS authenticates and encrypts the data being transferred between the client and
the web server.
D. HTTPS specifies the rules for passing data between the physical layer and the data
layer.
A. The protocol interpreter (PI) function engages once the data transfer process (DTP)
function is complete.
B. The DTP function is responsible for the login sequence.
C. FTP requires two connections, one for control and one for data.
D. Both the PI and the DTP close automatically when the transfer is complete.
A. ISDN
B. Frame Relay
C. dialup
D. T1/E1
7. A building has experienced a power outage. When the power returns, none of the
devices on one floor can access the Internet. The network administrator checks the
switch in the IDF that these devices are connected to and notes that the SYST LED on the
front of the switch is amber.
8. Which two parameters are stored in the routing table? (Choose two.)
10. If the start-up configuration is not found in NVRAM, where will the router look for it
next by default?
A. flash
B. ROM
C. RAM
D. TFTP server
11. Which address does a switch use for implementing port security?
13. Which two services are required to enable a computer to receive dynamic IP
addresses and access the internet usingn domain names? (Choose two.)
A. DNS
B. WINS
C. HTTP
D. DHCP
E. SMTP
14. Which routing protocol excludes the subnet information from routing updates?
A. EIGRP
B. OSPF
C. RIPv1
D. BGP