Documente Academic
Documente Profesional
Documente Cultură
com
TABLE OF CONTENTS
BOBCAT PRODUCTS
4
introduction
31
PRODUCT SPECIFICATIONS
COMPACT ExcavatorS
LOADERS, EXCAVATORS............. 3132 TRACTORS, UTILITY VEHICLES, TOOLCAT MACHINES, TELEHANDLER............................ 3334
42
13
47
utility vehicles
18
SKID-STEER LOADERS
51
TELEHANDLER: V417
26
54
compact tractors
29 2
DEALER SUPPORT
60
ATTACHMENTS
Angle blade 3 pt...................................... 59 Angle broom.................................. 36, 46, 59 Asphalt preservation tool: AH30 heater .... 36 Asphalt preservation tool: AP40 processor.36 Auger........................................ 12, 36, 46, 59 Backhoe...................................................... 36 Bob-Tach backhoe.................................... 36 Bale fork..................................................... 36 Boring unit.................................................. 36 Box blade............................................. 36, 59 Brushcat rotary cutter............................... 36 Brush saw.................................................... 37 Buckets: Excavators.................................... 12 Buckets: Loaders...................................3637 Bucket: Telehandler.................................... 53 Bucket: Toolcat Utility Work Machines....... 46 Chipper....................................................... 37 Clamp......................................................... 12 Combination bucket................................... 37 Concrete mixer........................................... 37 Concrete pump.......................................... 37 Digger........................................................ 37 Dozer blade................................................ 37 Drop hammer............................................. 37 Dumping hopper........................................ 37 Finish mower.............................................. 59 Flail cutter................................................... 37 Forestry cutter............................................ 38 Front-end loader........................................ 59 Grader........................................................ 38 Grading blade............................................ 12 Grapples: Excavators.................................. 12 Grapples: Loaders...................................... 38 Grapples: Telehandler ............................... 53 Grapple: Toolcat Utility Work Machines..... 46 Hydraulic breaker....................................... 38 Hydra-Tilt Swing Accessory...................... 12 Landplane................................................... 38 Landscape rake..................................... 38, 46 Mower.................................................. 38, 59 Packer wheel.............................................. 38 Pallet fork.............................................. 38, 53 Pin-grabber Quick Coupler Accessory....... 12 Planers ....................................................... 38 Plate compactor......................................... 12 PowerTilt Swing Accessory......................... 12 Push broom................................................ 38 Rear ballast box 3 pt................................ 59 Rear stabilizers............................................ 39 Rebar bender.............................................. 39 Ripper......................................................... 12 Rotary cutter 3 pt..................................... 59 Scarifier....................................................... 39 Scraper....................................................... 39 Seeder.................................................. 39, 46 Silt fence installer....................................... 39 Snow blade........................................... 39, 53 Snow pusher......................................... 39, 53 Snow V-blade............................................. 39 Snowblower.................................... 39, 53, 59 Sod layer..................................................... 39 Soil conditioner.................................... 39, 46 Sprayer................................................. 46, 59 Spreaders............................................. 39, 46 Steel tracks................................................. 40 Stump grinder............................................ 40 Sweeper...................................................... 40 Three-point hitch adapter.......................... 40 Tiller...................................................... 40, 58 Tilt carriage ................................................ 53 Tilt-TatchTM accessory................................. 40 Tree fork...................................................... 40 Tree spade.................................................. 40 Trench compactor....................................... 40 Trencher...................................................... 40 Truss boom ................................................ 53 VersaHandler adapter frame .................... 53 Vibratory plow............................................ 40 Vibratory roller............................................ 40 Water kit..................................................... 40 Wheel saw.................................................. 40
STAFF
Publisher
WorkSaver magazine is distributed by your local Bobcat dealer as a complimentary publication throughout the United States, Canada, Australia, New Zealand, New Guinea and the Pacific Islands. It is published four times per year by Bobcat Company, P.O. Box 6000, West Fargo, ND 58078. Produced for Bobcat Company by Two Rivers Marketing. Editorial correspondence should be directed to WorkSaver Magazine, Two Rivers Marketing, 106 E. 6th Street, Des Moines, IA 50309-1951.
Email: WorkSaver@Bobcat.com
Leroy Anderson
Editor
Bobcat and the Bobcat logo are registered trademarks of Bobcat Company in the United States. 2013 Bobcat Company. All rights reserved.
Ryan Johnson
Art director
ADDRESS CHANGES
Option 1
Emily Shendelman
Graphic Designers
Indicate your new address on the enclosed Dialogue card and mail it.
Option 3
Chad Halverson
Print Production Coordinator
Alicia Prendergast
Print Production Manager
Send the back cover area that includes your name and address, along with your new address to: WorkSaver Magazine, Two Rivers Marketing, 106 E. 6th Street, Des Moines, IA 50309-1951.
Option 4
Melissa Alto-Kintigh
Dealer CoordinatorS
Printed in the USA by Quad/Graphics an EPA partner through the Climate Leaders, Energy Star and SmartWaySM Transport Programs. The ink contains 27 percent renewable resources.
Please recycle
Visit m.bobcat.com with your favorite mobile device to view specifications, browse image galleries and watch videos for Bobcat products. You can also browse current special offers, used equipment listings or find the Bobcat dealer nearest you.
www.MyWorkSaver.com/build
Configure your machine and get a quote from your local Bobcat dealer.
PREPARE PERFORM
www.MyWorkSaver.com/training
Find safety videos and Bobcat training resources for compact equipment.
www.MyWorkSaver.com/literature
Request literature by mail or download a PDF.
www.BobcatAdvantage.com
Watch head-to-head excavator and compact track loader comparisons.
www.MyWorkSaver.com
Start a subscription to WorkSaver, update an address or add an email.
www.Bobcat.com/email
Sign up to receive Bobcat emails about new products, special promotions, contests and events.
Follow us:
>>> Excavators
Choose from 11 unique Bobcat excavators, ranging from 10 to 57 horsepower and featuring Conventional, Minimal and Zero Tail Swing configurations to best match your operating conditions. M-Series excavators provide unmatched visibility, operator comfort and service access. Improved hydraulic horsepower and auxiliary hydraulic flow ensure maximum performance from attachments, of which Bobcat offers 16 to maximize your potential. Turn to page 6 for more details.
>>> Loaders
New for 2013, Bobcat is expanding its line of M-Series loaders with seven new models. M-Series skid-steer and compact track loaders offer superior all-around visibility, top-of-the-line operator comfort and multiple uptime protection enhancements. The new models are part of 14 skid-steer loaders and eight compact track loaders. Also available are the unique all-wheel steer loader and two mini track loaders. Turn to page 13 for compact track loaders, 18 for skid-steer loaders and 26 for mini track loaders.
>>> Telehandler
When a task calls for a machine that can lift more and higher, Bobcat offers the V417 telescopic tool carrier (telehandler). Its Bob-Tach attachment mounting system enables the V417 to operate many Bobcat loader attachments for improved versatility. Turn to page 51 to learn more.
Toolcat Utility
Attachments
Attachments expand the versatility of Bobcat compact equipment, allowing you to take on more jobs, different tasks and get more work done in less time. Available for purchase or rent from your local Bobcat dealer, there are more than 100 unique attachments with hundreds of models to choose from. A new attachment section on www.Bobcat.com provides you with an in-depth look at Bobcat attachments and implements.
COMPACT EXCAVATORS
Excavators are increasingly replacing larger equipment as the preferred machines for excavating, grading and site preparation projects
Theres one brand of excavator that simply cant be beat: Bobcat. Thats because Bobcat excavators have repeatedly outperformed other brands in productivity, comfort, visibility and serviceability. Dig deep, place spoil away from a trench or directly into a truck and backfill with one machine a Bobcat excavator.
418 324 E26 E32 E35 E42 E45 E50 E55 E60 E80
INTRODUCTION
Excavator lineup
Choose from 11 Bobcat excavators, with Conventional, Minimal and Zero Tail Swing models to match different operating conditions and digging needs. From the ultra-compact 418 to the heavy-duty 8-metric-ton E80, theres a model suited for all applications. Nine of the 11 models offered by Bobcat are part of the M-Series the latest generation of excavator excellence and feature improved hydraulic horsepower for unmatched digging performance and faster cycle times.
Work in comfort
Comfort is king in Bobcat excavators. Easily enter and exit the cab through a large door opening. Once inside, M-Series excavators have the most cab space in the industry. For added comfort, an adjustable suspension seat and arm rests and fold-up foot pedals let owners choose their preferred settings. An optional enclosed cab with heat and air conditioning is available for yearround comfort. Easy-to-reach joystick controls are well positioned and provide fingertip control of boom swing and auxiliary hydraulic functions.
COMPACT EXCAVATORS
INTRODUCTION
SPECIFICATIONS
COMPACT EXCAVATORS
tight jobsites by The Zero Tail Swing 418 can access 28 inches, and retracting its track width to less than els. shov with ing replace hand digg
Engine 10.2 hp Final Tier 4 diesel (7,6 kW) Operating weight 2593 lb. (1176 kg) Dig depth 6 ft. (1,8 m) Reach at ground level 10.2 ft. (3,1 m) Bucket digging force 1865 lbf. (8294 N)
324
inches to travel Retract the 324 undercarriage to 39 then expand it and , ings open ow narr and through gates n digging. whe rint to 54 inches for a wider footp
Engine 13.9 hp Final Tier 4 diesel (10,4 kW) Operating weight 3571 lb. (1620 kg) Dig depth 8.5 ft. (2,6 m) Reach at ground level 14 ft. (4,2 m) Bucket digging force 3620 lbf. (16102 N)
418
Attachment shown: Hydraulic breaker
E26
attachments, the Approved for use with nine Bobcat inches wide and 60 than less is E26 g Swin Minimal Tail ries models. M-Se r large has the same spacious cab as
Engine 27 hp interim Tier 4 diesel (20,1 kW) Operating weight 5666 lb. (2570 kg)* Dig depth 8.5 ft. (2,6 m)* Reach at ground level 15 ft. 4 in. (4,6 m)* Bucket digging force 4991 lbf. (22200 N)*
E32
is just 60 inches wide, The Conventional Tail Swing E32 7 pounds for quickly 2,53 of and has excellent lift capacity building materials. and dirt ing plac and easily lifting and
Engine 33.3 hp interim Tier 4 diesel (24,8 kW) Operating weight 7183 lb. (3258 kg)* Dig depth 10 ft. 3 in. (3,1 m)* Reach at ground level 16 ft. 4 in. (4,9 m)* Bucket digging force 6968 lbf. (30995 N)*
Long-arm option Extendable-arm option Auto-shift drive Auto-idle throttle
Available
Standard
* Standard-arm configuration
wall with unrestricted Work close to objects or against a the Zero Tail Swing rotation and greater flexibility with r. vato exca pact com E35
Engine 33.3 hp interim Tier 4 diesel (24,8 kW) Operating weight 7468 lb. (3387 kg)* Dig depth 10 ft. 3 in. (3,1 m)* Reach at ground level 17 ft. 2 in. (5,2 m)* Bucket digging force 6968 lbf. (30995 N)*
Angle blade Long-arm option Auto-shift drive Extendable-arm option Auto-idle throttle
es it easy to The X-Change mounting system mak chments. atta switch among 12 Bobcat-approved access. ite jobs t grea for The E42 is 69 inches wide
Engine 41.8 hp interim Tier 4 diesel (31,2 kW) Operating weight 9246 lb. (4194 kg)* Dig depth 10 ft. 6 in. (3,2 m)* Reach at ground level 17 ft. 3 in. (5,2 m)* Bucket digging force 9183 lbf. (40850 N)*
Angle blade Long-arm option Auto-shift drive Extendable-arm option Auto-idle throttle
E45
ers unmatched The Zero Tail Swing E45 gives own s for daily checks access to routine maintenance item -access hood. side and ate through a swing-open tailg
Engine 41.8 hp interim Tier 4 diesel (31,2 kW) Operating weight 10077 lb. (4571 kg)* Dig depth 10 ft. 10 in. (3,3 m)* Reach at ground level 18 ft. 7 in. (5,6 m)* Bucket digging force 7650 lbf. (34030 N)*
Angle blade Long-arm option Auto-shift drive Extendable-arm option Auto-idle throttle
E50
g E50 has less than The 5-metric-ton Minimal Tail Swin that require a cts an inch of tail overhang for proje test spots. tigh the in work compact machine to
Engine 48.8 hp interim Tier 4 diesel (36,4 kW) Operating weight 10677 lb. (4843 kg)* Dig depth 11 ft. 7 in. (3,5 m)* Reach at ground level 19 ft. 6 in. (5,9 m)* Bucket digging force 8977 lbf. (39930 N)*
Angle blade Long-arm option Auto-shift drive
COMPACT EXCAVATORS
SPECIFICATIONS
E35
E42
SPECIFICATIONS
E55
COMPACT EXCAVATORS
osed cab, and heat and The E55 comes standard with an encl excavators available at air conditioning. Its one of five Bobc is clamp-ready. and n optio m le-ar with the extendab
Engine 48.8 hp interim Tier 4 diesel (36,4 kW) Operating weight 12271 lb. (5566 kg) Dig depth 12 ft. 11 in. (3,9 m) Reach at ground level 20 ft. (6 m) Bucket digging force 8977 lbf. (39932 N)
Angle blade Long-arm option Auto-shift drive Extendable-arm option Auto-idle throttle Turbo
the industry in dig The Minimal Tail Swing E60 leads on routine maintenance depth and reach. Spend less time greasing intervals. hour because of the E60s 250Engine 52.3 hp interim Tier 4 diesel (39 kW) Operating weight 13556 lb. (6149 kg) Dig depth 13 ft. 7 in. (4,1 m) Reach at ground level 21 ft. 4 in. (6,5 m) Bucket digging force 9117 lbf. (40554 N)
Angle blade Long-arm option Auto-shift drive Extendable-arm option Auto-idle throttle
E60
Attachment shown: Bucket with clamp
E80
Bobcat Company makes it easy to compare compact excavators on its Bobcat Advantage website. The website contains 17 short video clips that show why Bobcat compact excavators are No 1. Watch Bobcat excavators compete head-to-head with other brands in performance, uptime protection and attachment tests.
Engine 57 hp interim Tier 4 diesel (42,5 kW) Operating weight 18689 lb. (8477 kg) Dig depth 15 ft. 4 in. (4,6 m) Reach at ground level 24 ft. 6 in. (7,4 m) Bucket digging force 12280 lbf. (54623 N)
Auto-idle throttle
www.MyWorkSaver.com/BobcatAdvantage
10
Available
Standard
A Bobcat E42 compact excavator helps operator Troy Patterson lift, carry and place boulders, as well as complete trenching projects for landscape installations.
Visit www.MyWorkSaver.com/MX to read more, find additional product specs and watch videos about the benefits of Bobcat M-Series excavators.
COMPACT EXCAVATORS
11
SUCCESS STORY
ATTACHMENTS
Auger
Dig holes for posts, piers, poles or trees Drills 6- to 42-in. diameter holes Unique knuckle-joint design helps ensure plumb-line accuracy
Grapple (three-tine)
Make easy work of moving, sorting and placing bulky materials Move brush, logs, demolition debris and landscaping stones Three-tine grapple comes in two sizes
Bucket (trenching)
COMPACT EXCAVATORS
8- to 20-in.-wide pin-on 13- to 36-in. standard-duty X-Change attachment mounting system 12- to 36-in. severe-duty X-Change attachment mounting system
Bucket (grading)
Perfect choice for finish-grading, backfilling and ditch-cleaning Three sizes: 39, 52 and 54 in. Combine with Hydra-Tilt or PowerTilt swing accessory for greater productivity
Clamp
Easily move broken concrete, tree stumps and other oddshaped objects Works with a Bobcat trenching bucket or three-tine grapple Compatible with extendable-arm Bobcat excavators
Plate Compactor
Eliminates the need for a worker in the trench More powerful compaction force than a hand-operated compactor Two models are available
Grading Blade
55-inch blade Does an excellent job of finish grading, backfilling and leveling Combine with the Hydra-Tilt or PowerTilt swing accessory to create slopes, grade and contour
Grapple (rotating)
Dig square holes, clean up jobsites, sort material precisely, place landscape rock and timbers and move fallen trees Two bucket designs available Pin-on mount
Ripper
Penetrate and scarify frost and hard ground with the Bobcat ripper Replaceable tooth Also approved for use with the backhoe attachment on certain loader models
NOT PICTURED
12
Visit www.MyWorkSaver.com/MX/att for a complete list and pictures of Bobcat attachments for compact excavators.
13
INTRODUCTION
INTRODUCTION
the loaders impressive drive, engine torque and tractive effort. By the end of the day, you will notice the performance difference.
Difference-making performance
When its time to dig in and deliver pushing and lifting power, Bobcat compact track loaders outperform other brands every time. Each machine has the right balance between the engine, hydraulic pump, horsepower and cubicinch displacement to do more and do it faster. Take the controls to experience
Easy maintenance
To make sure Bobcat compact track loaders are simple to service, engine checkpoints are located within easy reach. Routine maintenance does not require moving radiators, raising lift arms or installing lift-arm support devices. Just open the tailgate and service the machine. Its that simple. A standard automatic shutdown feature monitors engine and hydraulic functions, alerts the operator to potential problems and shuts down the machine when necessary.
Visit www.MyWorkSaver.com/CTL to find additional details about Bobcat compact track loaders.
14
NEW
T550
et) allows the A width of just 50 inches (with buck erty lines and prop ow narr T110 to travel between s. tion loca ned confi in k wor
Rated operating capacity 1100 lb. (499 kg) Lift path Radius Engine 41.8 hp interim Tier 4 diesel (31,2 kW) Lift height to hinge pin 8 ft. 8 in. (2,6 m) Operating weight 5202 lb. (2360 kg) Auxiliary hydraulic flow 12.5 gpm (47,5 L/min) Ground pressure 4.6 psi (31,4 kPa)
Selectable Joystick Controls Two-speed travel
ent for the T180, The T550 is an M-Series replacem visibility ator oper ed atch offering unm for improved productivity.
Rated operating capacity 1995 lb. (905 kg) Lift path Radius Engine 66 hp interim Tier 4 turbo diesel (49,2 kW) Lift height to hinge pin 9 ft. 7 in. (2,9 m) Operating weight 7662 lb. (3475 kg) Auxiliary hydraulic flow 17.1 gpm (64,7 L/min) High-flow option 26.7 gpm (101,1 L/min) Ground pressure 4.5 psi with wide tracks (31 kPa)
Roller SuspensionTM System Selectable Joystick Controls
T590
NEW
ent for the T190. The T590 is an M-Series replacem hoppers easier. Clear high-sided truck boxes and
Rated operating capacity 2100 lb. (953 kg) Lift path Vertical Engine 66 hp interim Tier 4 turbo diesel (49,2 kW) Lift height to hinge pin 9 ft. 11 in. (3 m) Operating weight 7870 lb. (3570 kg) Auxiliary hydraulic flow 17.1 gpm (64,7 L/min) High-flow option 26.7 gpm (101,1 L/min) Ground pressure 4.7 psi with wide tracks (32,4 kPa)
Roller Suspension System Selectable Joystick Controls
T630
at projects This radius-lift-path loader excels filling or back as such hts, heig at mid-range dumping over a wall.
Rated operating capacity 2230 lb. (1012 kg) Lift path Radius Engine 74.3 hp interim Tier 4 turbo diesel (55,4 kW) Lift height to hinge pin 10 ft. 1 in. (3 m) Operating weight 9015 lb. (4089 kg) Auxiliary hydraulic flow 23 gpm (87,1 L/min) High-flow option 30.5 gpm (115,5 L/min) Ground pressure 4 psi with wide tracks (27,6 kPa)
Roller Suspension System Selectable Joystick Controls Two-speed travel
Available
Standard
15
SPECIFICATIONS
T110
SPECIFICATIONS
T650
stry, the T650 has With the largest cab space in the indu llent visibility. exce and unmatched operator comfort
Rated operating capacity 2570 lb. (1166 kg) Lift path Vertical Engine 74.3 hp interim Tier 4 turbo diesel (55,4 kW) Lift height to hinge pin 10 ft. 4 in. (3,1 m) Operating weight 9440 lb. (4282 kg) Auxiliary hydraulic flow 23 gpm (87,1 L/min) High-flow option 30.5 gpm (115,5 L/min) Ground pressure 4.1 psi with wide tracks (28,2 kPa)
Roller Suspension System Selectable Joystick Controls Two-speed travel
T750
Standard, Advanced Choose from three control options: Controls. Control System or Selectable Joystick
Rated operating capacity 3325 lb. (1508 kg) Lift path Vertical Engine 85 hp interim Tier 4 turbo diesel (63,4 kW) Lift height to hinge pin 11 ft. (3,3 m) Operating weight 10327 lb. (4684 kg) Auxiliary hydraulic flow 23 gpm (87,1 L/min) High-flow option 36.6 gpm (138,5 L/min) Ground pressure 4.2 psi with wide tracks (28,9 kPa)
Roller Suspension System Selectable Joystick Controls Two-speed travel
controls, the auto-idle Available with selectable joystick savings and less noise. fuel for RPM ine feature lowers eng
Rated operating capacity 3475 lb. (1576 kg) Lift path Vertical Engine 92 hp interim Tier 4 diesel (68,6 kW) Lift height to hinge pin 11 ft. (3,3 m) Operating weight 10327 lb. (4684 kg) Auxiliary hydraulic flow 23 gpm (87,1 L/min) High-flow option 36.6 gpm (138,5 L/min) Ground pressure 4.2 psi with wide tracks (28,9 kPa)
Roller Suspension System Selectable Joystick Controls Two-speed travel
T870
0 the highest A 12-foot lift height makes the T87 industry. the in er load k trac lifting compact
Rated operating capacity 3525 lb. (1599 kg) Lift path Vertical Engine 99.2 hp interim Tier 4 diesel (74 kW) Lift height to hinge pin 12 ft. (3,6 m) Operating weight 12678 lb. (5751 kg) Auxiliary hydraulic flow 23.8 gpm (90,1 L/min) High-flow option 37.7 gpm (142,7 L/min) Ground pressure 4.7 psi (32,3 kPa)
Roller Suspension System Selectable Joystick Controls Two-speed travel
T770
16
Available
Standard
Visit www.MyWorkSaver.com/CTL to learn more about the advantages of Bobcat compact track loaders.
17
SUCCESS STORY
SKID-STEER LOADERS
New Bobcat M-Series skid-steer loaders offer best-in-class operating cabs and top-of-the-line performance to improve operator comfort, productivity and uptime protection
S70 S100 S130 S510 S530 S550 S570 S590 S630 S650 S750 S770 S850 A770
INTRODUCTION
For more than 50 years, operators of Bobcat skid-steer loaders have been able to count on the worlds original compact work-saving machine to complete jobs large and small, routine and difficult easier and faster. The new lineup for 2013 features loaders that continue to deliver high-performance results while offering enhanced operator comfort and visibility, along with superior reliability and serviceability. In other words, the best skid-steer loaders in the business just keep getting better and better.
18
operator comfort. An adjustable seat accommodates different-sized operators while an optional air-ride seat adds even more comfort. The pressurized cab rates as the best in the business for keeping operators clean and comfortable. Its also a factor in reducing cab noise by as much as 60 percent over other machines.
Unparalleled access to service points makes regular maintenance easy. The large, swing-open tailgate makes it convenient to do routine maintenance. The transverse-mounted engine and belt drive system are accessible from one side for easy maintenance checks.
Improved visibility
The redesigned M-Series cab brings the operator closer to the front of the machine to better monitor attachment performance and improve visibility to the corners of the machine and the work area. In fact, visibility has been substantially increased in all directions.
Bobcat skid-steer loaders are designed and built for reliable performance day after day. The radiator and hydraulic oil cooler are well protected between the frame uprights to prevent damage. The superior cooling system is in a class by itself. The hydraulically powered smart fan senses machine temperature and only turns as fast as needed. Its also 30 percent quieter than ordinary cooling fans. The patented, dual-path cooling system takes in cool, clean air from above while forcing warm engine air out two side vents. An industry exclusive, the chaincase on a Bobcat loader is maintenance-free and has fixed axle tubes, stronger axles, fully sealed bearings and the largest chains in the industry (38 percent stronger than other brands). A standard feature on Bobcat loaders is automatic shutdown protection. The system, which monitors engine and hydraulic functions, alerts the operator and shuts down the machine when there is a problem.
Premium cab
The new M-Series cab is also larger and more comfortable. With up to 20 percent more interior space than competitive machines, Bobcat has created a new level of
Dozens of optional features such as heat and air conditioning, two-speed travel, deluxe instrumentation, highflow auxiliary hydraulics, Advanced Control System and Selectable Joystick Controls make it even more enjoyable and productive to operate a Bobcat skid-steer loader.
Visit www.MyWorkSaver.com/SSL to learn more about the advantages of Bobcat skid-steer loaders, including the new M-Series models. Choose from online buying tools to configure a skid-steer loader, and request a quote from your local Bobcat dealer.
S590 with root grapple
19
SKID-STEER LOADERS
Uptime protection
Get more work completed faster and easier. More than 65 Bobcat attachments are available to turn skid-steer loaders into a multi-purpose tool carrier that, within a matter of minutes, can dig a trench, unload a truck and sweep a parking lot. The standard Bob-Tach attachment mounting system allows the operator to move effortlessly from one attachment to another. An optional Power Bob-Tach system is available for changing non-hydraulic attachments from inside the cab.
INTRODUCTION
SPECIFICATIONS
S70
SKID-STEER LOADERS
where
S100
ds, This machine can lift up to 1,000 poun ed. limit is e spac re whe s work and
Rated operating capacity 1000 lb. (453 kg) Lift path Radius Engine 35.5 hp interim Tier 4 diesel (26,5 kW) Lift height to hinge pin 8 ft. 8 in. (2,6 m) Operating weight 4091 lb. (1856 kg) Auxiliary hydraulic flow 13.1 gpm (49,6 L/min)
Selectable Joystick Controls Two-speed travel
Rated operating capacity 700 lb. (318 kg) Lift path Radius Engine 23.5 hp Final Tier 4 diesel (17,5 kW) Lift height to hinge pin 7 ft. 11 in. (2,4 m) Operating weight 2795 lb. (1268 kg) Auxiliary hydraulic flow 9.8 gpm (37,1 L/min)
S130
an all-new M-Series The S510 replaces the S150 and is design of the radius-lift-path loader.
Rated operating capacity 1300 lb. (590 kg) Lift path Radius Engine 49 hp interim Tier 4 diesel (36,5 kW) Lift height to hinge pin 9 ft. 2 in. (2,8 m) Operating weight 5235 lb. (2375 kg) Auxiliary hydraulic flow 16.9 gpm (64 L/min)
Selectable Joystick Controls
NEW
Rated operating capacity 1650 lb. (748 kg) Lift path Radius Engine 49 hp interim Tier 4 diesel (36,5 kW) Lift height to hinge pin 9 ft. 6 in. (2,9 m) Operating weight 5922 lb. (2686 kg) Auxiliary hydraulic flow 17.1 gpm (64,7 L/min)
Selectable Joystick Controls Two-speed travel
20
S510
Attachment shown: BrushcatTM rotary cutter
Available
Standard
NEW
S530
ath S175, with an The S530 replaces the vertical-lift-p g capacity. liftin of ds poun 100 l additiona
Rated operating capacity 1850 lb. (840 kg) Lift path Vertical Engine 49 hp interim Tier 4 diesel (36,5 kW) Lift height to hinge pin 9 ft. 11 in. (3 m) Operating weight 6207 lb. (2815 kg) Auxiliary hydraulic flow 17.1 gpm (64,7 L/min)
Selectable Joystick Controls Two-speed travel
To start, Bobcat M-Series loaders have the largest entry/exit area. Operators are less likely to bump their head or body when they enter or exit the loader. The swing-open door may be removed without tools and does not take up cab space.
All-around visibility
The cab-forward design of Bobcat M-Series loaders provides operators with better all-around visibility and gets them closer to the work area. This may be particularly helpful when working in tight areas, such as grading next to a building or loading the machine on a trailer. Operators have improved visibility to the loadermounted attachment, including bucket corners to help see the cutting edge, for improved productivity.
Learn more and see pictures of the new Bobcat M-Series loader cab at www.MyWorkSaver.com/M-Series
travel up to 11 mph The S550 replaces the S160 and can el with the two-speed trav option.
Rated operating capacity 1750 lb. (794 kg) Lift path Radius Engine 61 hp interim Tier 4 diesel (45,5 kW) Lift height to hinge pin 9 ft. 7 in. (3 m) Operating weight 6265 lb. (2841 kg) Auxiliary hydraulic flow 17.1 gpm (64,7 L/min) High-flow option 26.7 gpm (101,1 L/min)
Selectable Joystick Controls Two-speed travel
NEW
S550
21
SKID-STEER LOADERS
SPECIFICATIONS
SPECIFICATIONS
NEW
SKID-STEER LOADERS
a high-flow auxiliary The S570 replaces the S185 and has ent performance. chm atta nced enha hydraulic option for
Rated operating capacity 1950 lb. (885 kg) Lift path Vertical Engine 61 hp interim Tier 4 diesel (45,5 kW) Lift height to hinge pin 9 ft. 11 in. (3 m) Operating weight 6395 lb. (2900 kg) Auxiliary hydraulic flow 17.1 gpm (64,7 L/min) High-flow option 26.7 gpm (101,1 L/min)
Selectable Joystick Controls Two-speed travel
NEW
available with The S590 replaces the S205 and is h include the whic , trols Con tick Selectable Joys Speed Management feature.
Rated operating capacity 2100 lb. (952 kg) Lift path Vertical Engine 66 hp interim Tier 4 diesel (49,2 kW) Lift height to hinge pin 9 ft. 11 in. (3 m) Operating weight 6735 lb. (3054 kg) Auxiliary hydraulic flow 17.1 gpm (64,7 L/min) High-flow option 26.7 gpm (101,1 L/min)
Selectable Joystick Controls Two-speed travel
S590
Attachment shown: Root grapple
S570
are approved More than 50 Bobcat attachments . S650 the with for use
Rated operating capacity 2180 lb. (989 kg) Lift path Radius Engine 74.3 hp interim Tier 4 diesel (55,4 kW) Lift height to hinge pin 10 ft. 1 in. (3 m) Operating weight 7707 lb. (3496 kg) Auxiliary hydraulic flow 23 gpm (87,1 L/min) High-flow option 30.5 gpm (115,5 L/min)
Selectable Joystick Controls Two-speed travel
S650
es this machine a Best visibility in the industry mak g and loading. fillin good choice for jobs such as back
Rated operating capacity 2690 lb. (1220 kg) Lift path Vertical Engine 74.3 hp interim Tier 4 diesel (55,4 kW) Lift height to hinge pin 10 ft. 4 in. (3,1 m) Operating weight 8327 lb. (3777 kg) Auxiliary hydraulic flow 23 gpm (87,1 L/min) High-flow option 30.5 gpm (115,5 L/min)
Selectable Joystick Controls Two-speed travel
S630
Attachment shown: Wheel saw
22
Available
Standard
S750
of lift height, The vertical-lift-path S750 has 11 feet ons. icati appl ing load for l idea it making
Rated operating capacity 3200 lb. (1452 kg) Lift path Vertical Engine 85 hp interim Tier 4 diesel (63,4 kW) Lift height to hinge pin 11 ft. (3,3 m) Operating weight 8730 lb. (3960 kg) Auxiliary hydraulic flow 23 gpm (87,1 L/min) High-flow option 36.6 gpm (138,5 L/min)
Selectable Joystick Controls Two-speed travel
Bobcat loaders are the rst and only loaders to be remote-ready Operate the loader remotely when you dont want an operator in the cab Transfer controls easily to another loader Guard-bar protects transmitter controls from accidental activation and damage Approved for dozens of Bobcat loader attachments Easy to switch between remote and machine/direct control modes Rechargeable transmitter battery has up to 15 hours of life Transmitter tilt sensor stops loader engine if the transmitter is tilted more than 45 degrees in any direction Bobcat Loader Radio Remote Control Operator Training Course Kit features a DVD along with classroom training and hands-on operation Bobcat loader Radio Remote Control System is not approved for certain types of hazardous or explosive environments (see the Operation, Maintenance and Parts Manual for more information)
S770
Available
The
two-speed travel, Options like deluxe instrumentation, Tach set the high-flow hydraulics and Power Bobds. bran r othe S770 apart from
Rated operating capacity 3350 lb. (1520 kg) Lift path Vertical Engine 92 hp interim Tier 4 diesel (68,6 kW) Lift height to hinge pin 11 ft. (3,3 m) Operating weight 9175 lb. (4162 kg) Auxiliary hydraulic flow 23 gpm (87,1 L/min) High-flow option 36.6 gpm (138,5 L/min)
Selectable Joystick Controls Two-speed travel
23
SKID-STEER LOADERS
SPECIFICATIONS
SPECIFICATIONS
SKID-STEER LOADERS
S850
er lineup and has The S850 tops off the skid-steer load easy operation. for st standard controls with power assi
Rated operating capacity 3950 lb. (1791 kg) Lift path Vertical Engine 92 hp interim Tier 4 diesel (68,6 kW) Lift height to hinge pin 12 ft. (3,6 m) Operating weight 10008 lb. (4550 kg) Auxiliary hydraulic flow 23 gpm (87,1 L/min) High-flow option 36.6 gpm (138,5 L/min)
Selectable Joystick Controls Two-speed travel
Fingertip controls
Bobcat loader operators can better manage attachments with help from fingertip controls. With minimal effort, operators can precisely control Bobcat attachment functions for improved productivity. A Bobcat detent feature continuously engages attachment flow without needing to hold a switch. Additionally, the detent feature can be used to lock the auxiliary hydraulic flow in the opposite direction. This is particularly helpful for use with Bobcat sweepers, soil conditioners, tillers and other attachments. Variable or maximum flow is available for operation of Bobcat grapples and combination buckets.
The Bobcat A770 all-wheel steer loader is the only compact loader in the industry that offers both allwheel steer and skidsteer capabilities for minimal ground disturbance. In the all-wheel steer mode, both the right and left sides work together to minimize turf damage and marks on finished surfaces, and reduce tire wear. The inside tires turn at a different angle and speed than the outside tires. In skid-steer mode, the tires on the left side work independently of those on the right side to achieve maximum maneuverability. Visit www.MyWorkSaver.com/AWS to learn more about the exclusive Bobcat all-wheel steer loader.
A770
choose all-wheel A unique loader that allows you to skid-steer for or age dam ace surf steer to limit maximum maneuverability.
Rated operating capacity 3325 lb. (1508 kg) Lift path Vertical Engine 92 hp interim Tier 4 diesel (68,6 kW) Lift height to hinge pin 11 ft. (3,3 m) Operating weight 9460 lb. (4291 kg) Auxiliary hydraulic flow 23 gpm (87,1 L/min) High-flow option 36.6 gpm (138,5 L/min)
Two-speed travel
24
Available
Standard
The maneuverability of the loader allows us to finish grade right up next to the foundation. The time we save is amazing.
Delbert Schlabach, Schlabach Excavating
People around here are leasing their land for the oil and gas rights, says Monroe, and home construction is picking up as the population is expected to grow. If everything works out, our entire area, including us, should be sitting pretty good.
Brothers Delbert (left) and Monroe Schlabach can work more efficiently, thanks to Bobcat skid-steer loaders and attachments.
Visit www.MyWorkSaver.com/M-Series to learn more about why M-Series Bobcat loaders are the leader in performance, comfort and reliability.
25
SKID-STEER LOADERS
SUCCESS STORY
INTRODUCTION
MT52 MT55
26
ATTACHMENT OPTIONS
With more than two dozen Bobcat attachments approved for mini track loaders, there are an almost endless number of jobs that you no longer need to complete with hand tools, or with back-breaking labor, either. From the angle broom and auger to the tiller and trencher, whatever the project, there is an attachment that turns a Bobcat mini track loader into an efficient and productive jobsite solution. Site preparation, utility installation, demolition and transporting building materials are just of a few of the tasks that can be accomplished with the mini track loader and a job-matched attachment. All attachments can be connected quickly and easily with the standard Bob-Tach attachment mounting system. Some attachments approved for mini track loaders may also be operated with larger Bobcat loaders and excavators for even more versatility.
Rubber tracks also help limit damage to surfaces such as established lawns, concrete and patio pavers. This reduces repairs and costs when the project is done. Ground pressure is just 4.7 psi for the MT52 and 3.6 psi for the MT55 using the wide track option.
EASY-TO-USE CONTROLS
The one-hand-drive controls on the Bobcat mini track loaders are easy to use and reach. One multi-function handle operates travel speed and direction while another lever controls lift and tilt functions. The adjustable height drive controls allow operators of varying heights to work comfortably. Check out these mini track loaders at your local Bobcat dealership and learn just how much a one-man crew can do.
Visit www.MyWorkSaver.com/MTL to find more information about Bobcat mini track loaders.
EXCEPTIONAL TRACTION
You can rely on the durable rubber track undercarriage to keep the mini track loaders working in soft, sandy, wet or muddy conditions with minimal ground disturbance. The working season can be extended in both spring and fall to increase revenue and profits.
s jobsites dont stop At just 36 inches wide, limited-acces ual labor. this hard-working alternative to man
Rated operating capacity 520 lb. (236 kg) Width 35.6 in. without bucket (903 mm) Engine 20 hp Final Tier 4 diesel (14,9 kW) Lift height to the hinge pin 71.2 in. (1807 mm) Operating weight 2580 lb. (1170 kg) Auxiliary hydraulic flow 12 gpm (45,4 L/min) Ground pressure 4.7 psi (35 kPa)
higher lift capacity The MT55 has more tractive effort, in a small package. with still er, and increased horsepow
Rated operating capacity 550 lb. (249 kg) Width 35.6 in. without bucket (903 mm) Width with wide track option 41.4 in. (1055 mm) Engine 25 hp Final Tier 4 diesel (18,6 kW) Lift height to the hinge pin 71.2 in. (1807 mm) Operating weight 2610 lb. (1186 kg) Auxiliary hydraulic flow 12 gpm (45,4 L/min) Ground pressure with wide tracks 3.6 psi (28 kPa)
MT55
MT52
27
SPECIFICATIONS
SUCCESS STORY
Site development
The MT55 has really been beneficial to our company with our land development clients, Hawkins says. The tough housing market makes budgets tight on new developments. This equipment has really helped install silt fences because, without the mini track loader, we would have to clear out a much bigger area to use the T650 or E45. Our clients are looking for the most economical ways to get the projects completed on time and within the budget. The MT55 makes this possible when installing silt fence.
Trail-building
Along with being a valuable complement to his highly productive Bobcat loader and excavator, the MT55 and dozer blade has enabled Hawkins to expand into the trail-building business through the mountain terrain. Hawkins sees more trail-building in his future now that he has the right combination of equipment. Hes done plenty of hiking trails for developers in subdivisions. He is using that experience to bid on trail work in the surrounding areas. Trails are somewhat narrow and you have to make them interesting for the user, he says. They often require adjustments in the field, and with the MT55, we will be able to make any needed changes from the original design easier and faster. Its the perfect machine for this application.
The mini track loader has allowed us to get more done in less time and with fewer employees.
Josh Hawkins, Slope Solutions
A Bobcat MT55 mini track loader complements Josh Hawkins Bobcat compact track loader and compact excavator on landscape installations.
Visit www.MyWorkSaver.com/MTL to learn more about Bobcat mini track loaders and approved attachments.
28
PRODUCT SPECIFICATIONS
Skid-Steer Loaders
Engine
Gross Horsepower (SAE) hp (kW)
S70 S100 S130 S150 S160 S175 S185 S205 S510 S530 S550 S570 S590 S630 S650 S750 S770 S850 A770* 23.5 (17,5) 35.5 (26,5) 49 (36,5) 49 (36,5) 61 (45,5) 49 (36,5) 61 (45,5) 66 (49,2) 49 (36,5) 49 (36,5) 61 (45,5) 61 (45,5) 66 (49,2) 74.3 (55,4) 74.3 (55,4) 85 (63,4) 92 (68,6) 92 (68,6) 92 (68,6)
*All-wheel steer loader.
Performance
Engine Type
Diesel Diesel Diesel Diesel Turbo Diesel Diesel Turbo Diesel Turbo Diesel Diesel Diesel Turbo Diesel Turbo Diesel Turbo Diesel Turbo Diesel Turbo Diesel Turbo Diesel Turbo Diesel Turbo Diesel Turbo Diesel
Dimensions
Max. Travel Speed Two-Speed Option mph (km/hr)
n/a 8.7 (14) n/a 11.1 (17,9) 11.1 (17,9) 11.1 (17,9) 11.1 (17,9) 10.7 (17,2) 11 (17,3) 11 (17,3) 11 (17,3) 11 (17,3) 11 (17,3) 12.3 (19,8) 12.3 (19,8) 12.3 (19,8) 12.3 (19,8) 12.3 (19,8) 12.3 (19,8)
Beacons
Performance
Engine Type
Diesel Diesel
Dimensions
Operating Weight lb. (kg)
2580 (1170) 2610 (1183)
Dimensions
Ground Pressure with Narrow Tracks psi (kPa)
4.6 (31,4) 4.9 (33,7) 5 (34) 5.8 (39,9) 5.6 (38) 5.5 (37,9) 5.8 (39,9) 5.9 (40,6) 5.9 (40,6) n/a
Replacement Seats
T110 T180 T190 T550 T590 T630 T650 T750 T770 T870
Cab Enclosures
Decal Kits
NEW
compact Excavators
Type
Tail Swing Type
418 324 E26 E32 E35 E42 E45 E50 E55 E60 E80 Zero Conventional Minimal Conventional Zero Conventional Zero Minimal Conventional Minimal Minimal
Engine
Gross Horsepower (SAE) hp (kW)
10.2 (7,6) 13.9 (10,4) 27 (20,1) 33.3 (24,8) 33.3 (24,8) 41.8 (31,2) 41.8 (31,2) 48.8 (36,4) 48.8 (36,4) 52.3 (39) 57 (42,5)
Performance
Machine Shutdown Protection
n/a n/a Standard Standard Standard Standard Standard Standard Standard n/a n/a
Dimensions
Travel Speed: High mph (km/hr)
2.1 (3,3) 2.5 (4) 2.9 (4,7) 2.9 (4,7) 2.9 (4,7) 2.9 (4,7) 2.6 (4,2) 3.1 (5) 3.1 (5) 2.4 (3,9) 2.9 (4,7)
Long-Arm Option
Extendable-Arm Option
Engine Type
Diesel Diesel Diesel Diesel Diesel Diesel Diesel Diesel Diesel Diesel Diesel
Angle Blade
n/a n/a n/a n/a Optional Optional Optional Optional Optional n/a n/a
Dig Depth
ft. (m)
ft. (m)
ft. (m)
www.bobcat.com/readyloaders or www.bobcat.com/readyexcavators
Bobcat and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries. 2011 Bobcat Company. All Rights Reserved. | P127A-0 *12-month pro-rated warranty from the date of purchase.
n/a n/a n/a n/a n/a n/a 8089 (3669) 13 (3,9) 8374 (3798) 13 (3,9) 9976 (4525) 12.5 (3,8) 10807 (4902) 12.8 (3,9) n/a n/a 12602 (5716) 14.5 (4,4) n/a n/a n/a n/a
n/a n/a n/a 19 (5,7) 19.7 (6) 19.1 (5,8) 20.5 (6,2) n/a 21.8 (6,6) n/a n/a
n/a n/a n/a 12.5 (3,8) 12.5 (3,8) 13.3 (4) 13 (3,9) n/a 14.5 (4,4) n/a n/a
31
32
PRODUCT SPECIFICATIONS
compact tracTORS
Engine
Horsepower hp (kW)
CT122 CT225 CT230 CT235 CT335 CT440 CT445 CT450 22 (16,4) 27 (20,1) 30 (22,4) 34 (25,4) 38 (28,3) 41 (30,6) 45 (33,6) 49 (36,5)
Performance
PTO Horsepower (HST / SST) hp (kW)
16.2 (12,1) 19.5 (14,5) 22 (16,4) 26.5 (19,8) 26.5 (19,8) / 28.5 (21,3) 30 (22,3) 34 (25,4) / 36.5 (27,2) 38 (28,3) / 41 (30,6)
3-Point Hitch
Category 1 Category 1 Category 1 Category 1 Category 1 Category 1 Category 1 Category 1
At your service
For complete service and parts needs, Bobcat dealers provide trained service technicians, genuine parts, accessories, light construction products and readily available rentals
More than 600 Bobcat dealers across the United States and Canada are ready to serve you with a trio of service, parts and rental aimed to maximize your machine uptime and provide additional resources as needed. No other compact equipment manufacturer can offer this breadth of service.
Dimensions
Operating Weight HST / SST lb. (kg)
CT122 CT225 CT230 CT235 CT335 CT440 CT445 CT450 2026 (919) 3028 (1373) 3056 (1386) 3056 (1386) 3668 (1664) / 3701 (1679) 3847 (1745) 3881 (1760) / 3914 (1775) 3935 (1785) / 3968 (1800)
Loader Attachment
Cab Height in. (mm)
n/a n/a n/a n/a 94.3 (2395) 94.7 (2405) 94.7 (2405) 94.7 (2405)
Features
Loader Max. Lift Height in. (mm)
74.8 (1900) 84.1 (2136) 84.1 (2136) 84.1 (2136) 97.9 (2487) 111.5 (2832) 111.5 (2832) 111.5 (2832)
Loader Lift Capacity at 500 mm in Front of Bucket Pin (with rear ballast) lb. (kg)
744 (337) 1108 (503) 1108 (503) 1108 (503) 1369 (621) 2030 (921) 2030 (921) 2030 (921)
Loader Lift Capacity at Bucket Pivot (with rear ballast) lb. (kg)
1075 (488) 1514 (687) 1514 (687) 1514 (687) 1805 (819) 2713 (1231) 2713 (1231) 2713 (1231)
Suspension Seat
Standard Standard Standard Standard Standard Standard Standard Standard
Mid PTO
Standard Optional Optional Optional Optional Optional Optional Optional
Cruise Control
Standard Standard Standard Standard Standard Standard Standard Standard
* Per SAE J283 ** Measured at 15 above ground *** General purpose and turf tires also available
Utility vehicles
Engine
Engine Type
3200 3400 3400XL 3450 Gasoline Gasoline / Diesel Gasoline / Diesel Gasoline / Diesel
Performance
Displacement cu. in. (L)
27.8 (0,4) 30.5 (0,5) / 55 (0,9) 30.5 (0,5) / 55 (0,9) 55 (0,9)
Dimensions
Travel Speed (reverse) mph (km/h)
24 (39) 26 (42) / 16 (26) 26 (42) / 16 (26) 16 (26)
Horsepower hp (kW)
29 (21,6) 32 (23,9) / 24.8 (18,5) 32 (23,9) / 24.8 (18,5) 24.8 (18,5)
Performance
Machine Rated Capacity* lb. (kg)
2200 (996)
Dimensions
Travel Speed (high range) mph (km/h)
018 (029)
Attachment Systems
Lift Height (pivot pin) in. (mm)
83.3 (2116)
3-Point Hitch
3-Point Hitch Capacity
lb. (kg)
n/a 1775 (805)
Length Width (with attachment) (without bucket) in. (mm) in. (mm)
171.4 (4353) 60 (1524)
Outside Turning Rated Operating Height Diameter (AWS) Capacity (ROC) in. (mm) ft. (m) lb. (kg)
81 (2057) 17.5 (5,3) 1500 (680) 1500 (680) with 3-point hitch
PTO Horsepower
hp (kW)
n/a 25 (18,6)
5600
Turbo Diesel
61 (45,4)
5610
Turbo Diesel
61 (45,4)
5835 (2646)
2200 (996)
4200 (1901)
4000 (1814)
09 (014,5)
018 (029)
09 (014,5)
180.8 (4592)
60 (1524)
81 (2057)
17.5 (5,3)
83.3 (2116)
18.9 (71,5)
* Machine rated capacity: combined weight of load on lift arm, cargo box load, operator and passenger.
** T otal rated capacity: combined weight of load on lift arm, cargo box load, operator, passenger and tow weight if equipped with a hitch.
Performance
Displacement cu. in. (L)
230 (3,7)
Dimensions
Max. Reach in. (mm)
124 (3150)
Horsepower hp (kW)
75 (56)
Properly maintaining your Bobcat equipment will help extend its life, and now its easy to learn the essential maintenance checks. Visit www.MyWorkSaver.com/maintenance/tips to watch the videos. For additional information regarding maintenance procedures, refer to your operation and maintenance manual, operators handbook and machine decals. WorkSaver BobCatalog 2013
33
34
29
Most operators are pretty good about keeping up with routine maintenance its the out of sight, out of mind things that are most often overlooked and can lead to costly repairs, Sacks says. Its these issues that the PM service program helps detect.
Continuous monitoring
The core of the PM service program is a small Global Positioning System (GPS) that service technicians install on Bobcat machines. The device is installed free of charge at the time of the first service. Equipment model serial numbers are linked to a unique number assigned to each tracking device, which monitors machine activity and location. The device monitors several important functions hours of operation, oil pressure, battery voltage, etc. and generates an email or text alert automatically when potential problems surface or hours specified for various routine maintenance tasks approach. The information is relayed to a central database and recorded for historical documentation at the dealership.
A main component of the PM service program is a thorough 33-point, top-to-bottom, inside and outside inspection. Once completed, customers receive a BobCHECKSM Inspection Report summarizing the results. Service technicians then complete scheduled maintenance and offer recommendations for any additional services and corresponding charges that may be beneficial in preventing the onset of bigger problems.
The program is designed to allow our customers to focus on their business and let us take care of the maintenance.
Joyce Sacks, Metro Bobcat Sales
We developed the PM service program to help our customers get the maximum productivity and value from their Bobcat equipment, Sacks says. The best way to do that is to keep machines properly maintained through scheduled maintenance. The program is designed to allow our customers to focus on their business and let us take care of the maintenance. Timely completion of various maintenance tasks helps minimize downtime and saves our customers money.
35
ATTACHMENTS
Angle Broom
Three widths: 48, 68 and 84 in. With fingertip controls, hydraulically angle the 68- and 84-in. models NEW: heavy-duty orange bristles available; longer-lasting, durable bristles Compatible Equipment CT CTL MTL SSL TH UWM
Bob-Tach Backhoe
6-ft. digging depth Three bucket widths: 13, 16 and 20 in. Dipper swings left or right 48 degrees to dump spoil without moving the loader Compatible Equipment CTL SSL
LOADERS
Part of new asphalt preservation tools Powered by a 36 kVA generator and connected to Bobcat loader with Bob-Tach mounting system Three electric heating units Four adjustable jack stands
Bale fork length: 40.8 in. Two small-diameter forks penetrate material to stabilize it Mounts to standard or heavy-duty pallet fork attachment frame Compatible Equipment CT CTL SSL UWM
NEW
Boring Unit
Install utilities under driveways and sidewalks with minimal surface damage 36 in. wide Bore as deep as 2 ft. below the surface and as far as 30 ft. horizontally Compatible Equipment MTL SSL
NEW
Box Blade
84-in. grading attachment; laser-guided option available Foam-lled tires that never go flat for uptime protection Fingertip control of blade raising and lowering function Compatible Equipment CTL SSL UWM
BUCKETS
Bucket (fertilizer and grain)
Greater rollback range allows you handle large volumes of granular material with minimum spillage over the front edge
Backhoe
Digging depths from 6 to 11 ft. Bucket widths from 9 to 39 in. Optional rear stabilizers and street pads available Compatible Equipment CT CTL MTL SSL
With a longer bottom than the The low-profile bucket dirt bucket works well in many grading, The general-purpose bucket is leveling and material excellent for light-duty grading, handling applications leveling and material handling on A bolt-on grapple attachment smaller Bobcat loaders expands the capabilities of this bucket
36
EQUIPMENT KEY:
CT (Compact Tractor)
MX
Remove brush and small trees (up to 15 feet tall) A 28-inch, high-tensile steel blade produces a powerful cutting action Special Applications Kit required Compatible Equipment CTL SSL
Dig trenches, remove rocks and stumps, transplant small trees, prune roots, and carry and plant balled and burlapped trees Six models with digging depths from 27 to 48 in. Widths: 12 to 36 in. Compatible Equipment CT CTL MTL SSL
Chipper
For grinding branches, tree limbs and small trees in locations where other equipment wont fit Two models available Continuous chipping size up to 5 in. diameter; reduces branch volume 10-to-1 Compatible Equipment CTL SSL UWM
Dozer Blade
Combination Bucket
Use it as a bucket for loading, carrying and dumping; as a grapple for handling odd-shaped objects; or for dozing, leveling and spreading material with the clamshell open Six sizes: 44 to 84 in. Compatible Equipment CTL MTL SSL TH UWM
Drop Hammer
Demolish concrete up to 18 inches thick with this efficient attachment, delivers up to 20 blows per minute 1140-lb. hammer weight 3600 ft.-lb. of impact energy Compatible Equipment CTL SSL
Concrete Mixer
6.9-cu.-ft. capacity Mixer drum is made of 3/16-in. steel with mixing fins of -in. reinforced steel Operate from outside the loader with the Remote Attachment Control Kit Compatible Equipment CTL SSL
Dumping Hopper
Move large amounts of materials fast and with minimum effort Available in two sizes: 25.6 and 67.5 cu. ft. Predrilled holes drain away rainwater Compatible Equipment CTL SSL UWM
Concrete Pump
Delivers concrete in difficult-to-reach locations Pump as far as 250 feet horizontally and up to two stories vertically Places up to 28 cubic yards per hour Compatible Equipment CTL SSL
Flail Cutter
Remove light brush and small trees (up to 3 inches in diameter) Variable displacement motor with a 17- to 37-gpm flow range Floating linkage and compact deck length follows the land contour Compatible Equipment CTL SSL UWM
(Excavator)
TH (VersaHandler TTC)
37
LOADERS
Level, pile and grade loose dirt, gravel and sand; backfill; fill trenches; dig runoff grades and shape landscape areas Five models: 54 to 96 in. Blade angles 30 degrees
ATTACHMENTS
Brush Saw
Digger
ATTACHMENTS
Forestry Cutter
Two sizes: 50 and 60 in. Two-speed models are available in each size for maximum productivity while mulching -in.-thick laminated forestry door with the Forestry Applications Kit required Compatible Equipment CTL SSL
Landscape Rake
Rake and collect surface debris while smoothing and leveling the soil It picks up rocks -inch and larger and most -inch rocks Two models: 60- and 72-in. working widths Compatible Equipment CTL SSL TH (V417 only) UWM
Grader
LOADERS
Six-way, hydraulically controlled moldboard operated with switches for precise control Three models: 84, 96 and 108 in. Moldboard manually adjusts sideways up to 12 in. on either side on the 84-in. model Compatible Equipment CTL SSL UWM
Mower
Cutting widths of 71.5 and 89.5 in. Adjustable cutting heights from 2 to 5.5 in. in half-inch increments Standard rear discharge; side-discharge and mulching kits available Compatible Equipment CTL SSL TH (V417 only) UWM
Grapple (industrial)
Easily handle bulky materials, such as brush, logs and landscape boulders Eight models from 36 to 80 in. Fork and bucket styles Compatible Equipment CTL MTL SSL TH (V417 only)
Packer Wheel
Compacts the soil from the bottom up as the weight of the packer wheel and down pressure from the excavator or loader is used to achieve compaction No auxiliary hydraulics required 11-in. width Compatible Equipment CTL MX SSL
Grapple (root)
Clear rocks, roots, brush and overgrowth easier Design allows dirt to fall between the teeth to minimize topsoil removal for lighter and fewer loads Five models from 36 to 82 in. Compatible Equipment CTL MTL SSL TH (V417 only)
Pallet Fork
Lift, carry and place materials easily with a pallet fork and Bobcat loader Five models Optional heavy-duty pallet fork and frame available Compatible Equipment CT CTL MTL SSL TH UTV UWM
Hydraulic Breaker
Seven models 60 to 1000 ft.-lb. impact energy classes Approved tools include multiple points, chisels and tamping pads Compatible Equipment CTL MTL MX SSL
40-in. Planer
Make street repairs, match uneven pavement surfaces, cut drainage in parking lots and clean up around larger milling machines. Compatible Equipment CTL SSL
Landplane
Three models: 48, 72 and 78 in. Cutting edges on front and rear Deluxe models include scarier assembly and expanded metal grate Compatible Equipment CT CTL MTL SSL UWM
Push Broom
This attachment sweeps wet or dry material Operate the broom going forward or in reverse Attaches to loader bucket quickly with spring-loaded pins Compatible Equipment CTL SSL UWM
38
EQUIPMENT KEY:
CT (Compact Tractor)
MX
Frame-mounted, quick-attach rear stabilizers Grouser bars help keep the loader from being pulled forward toward the work area Street pads are available to protect sensitive surfaces Compatible Equipment CTL SSL
Clear snow quickly and efficiently from parking lots, driveways and building sites Two models: 96 and 120 in. Standard rubber or dealer-installed polyurethane cutting edge Compatible Equipment CTL SSL TH (V417 only) UWM
NEW
ScariFIer
Rip up asphalt and break up hard-packed soil Adjustable skid shoes and teeth allow multiple depth options Compatible Equipment CTL SSL
Snowblower
Widths: 36 to 84 in.; standard or high-flow models available Replaceable bolt-on cutting edges Truck loading chute available for high-ow models Compatible Equipment CT CTL MTL SSL TH (V417 only) UWM
scraper
Remove difficult, packed-on materials such as mud, ice and snow from sidewalks, driveways, bike paths and parking lots Two models: 36 and 45 in. Self-sharpening cutting edge Compatible Equipment CTL SSL TH (V417 only) UWM
Sod Layer
Carry and lay rolls of sod from 24 to 48 inches wide Sod is held in place during transport by an exclusive lock-and-pin system Relief valve prevents over-squeezing of sod rolls Compatible Equipment CTL SSL UWM
SP5 Spreader
Spread dry, free-flowing granular material, including seed, fertilizer, sand and salt 5.75-cu.-ft. capacity hopper Spreads from 4 to 40 ft. Compatible Equipment CTL SSL
Snow Blade
Five standard-duty models: 54, 60, 72, 84 and 96 in. Three heavy-duty models: 86, 96 and 108 in. Hydraulic cylinders angle the moldboard left or right 30 degrees Compatible Equipment CT CTL MTL SSL TH (V417 only) UTV UWM
(Excavator)
TH (VersaHandler TTC)
39
LOADERS
Five sizes: 60, 72, 84, 96 and 108 in. Use straight, angle left, angle right, plow or scoop to clear snow Reversible high-carbon steel cutting edge; optional rubber cutting edge
ATTACHMENTS
Rear Stabilizers
Snow Pusher
ATTACHMENTS
Steel Tracks
Improve the performance of your skid-steer loader in rough, rocky or muddy conditions Tracks provide better flotation and reduced ground pressure Compatible Equipment SSL
Tree Spade
Five sizes, three spade shapes Open design for easy access to trees Adjustable legs allow for digging five different sizes of tree balls Compatible Equipment CTL SSL
Stump Grinder
LOADERS
Three models Valve design prevents cutting wheel from stalling in the cut Rubber deecting shields and screening provide additional operator comfort and protection from wood chips Compatible Equipment CTL MTL SSL UWM
Trench Compactor
Wheel-type trench compactor does an excellent job of compacting soil Use it in trenches 4 to 12 in. wide and up to 4 ft. deep Compatible Equipment CTL SSL
Sweeper
Operate in forward or in reverse to deposit dirt and other debris into the bucket Optional gutter brush can be attached for cleaning curbs and hard-to-reach places Seven models: 44 to 84 in. Compatible Equipment CTL MTL SSL TH (V417 only) UWM
Trencher
Eight models to dig from 2 to 5 ft. deep Trench widths: 4 to 12 in. wide Side-shift feature: Work close to a building; manual and hydraulic side-shift available Compatible Equipment CTL MTL MX SSL TH (V417 only) UWM
Vibratory Plow
Install flexible pipe and cable Produces a narrow, knife-like slit, 6 to 18 inches below the surface Pulls up to 1.5-in.-diameter pipe, cable or wire Compatible Equipment MTL
Tiller
Break up the ground for seed, sod or other plantings Three widths: 40, 62 and 76 in. Bi-directional rotation for top-cutting and under-cutting in either direction Compatible Equipment CT CTL MTL SSL TH (V417 only) UWM
Vibratory Roller
Three widths: 48, 73 and 80 in. Smooth and padded drums available (80-in. model is smooth only) Industry-exclusive smooth shell kit converts padded drums into smooth drums Compatible Equipment CTL SSL
Tilt-Tatch accessory
Position attachments independent of the loader With a rotation range of right or left 15 degrees from center a bucket Replaceable wear components and debris guards on front of the Bob-Tach mounting system Compatible Equipment CT CTL SSL UWM
Water Kit
Helps reduce dust from attachments such as an angle broom or sweeper Two to four spray nozzles evenly distribute water High-capacity water tanks save time Compatible Equipment CTL SSL UWM
Tree Fork
Lift, lower and transport balled-and-burlapped trees Hydraulic arm opens and closes to grasp and hold objects securely against a rigid second arm Not for medium- or large-frame loaders Compatible Equipment CTL MTL SSL
Wheel Saw
Cuts through asphalt, concrete, frozen ground and wire mesh Two models: 18- or 24-in. max. dig depths Wheel widths: 3, 6 and 8 in. Compatible Equipment CTL SSL
40
Visit www.MyWorkSaver.com/SSL/att for more information about all 68 Bobcat attachments approved for Bobcat skid-steer loaders.
Commence wrecking
Bobcat machines and attachments hold up well in harsh demolition applications In the competitive demolition business, a company that owns its own equipment has an advantage, especially on projects where the schedule is an important factor. That, says Scott McPherson, is one of the reasons the firm started by his parents 46 years ago has been so successful. These days, in our industry, you have to find every competitive advantage possible, whether it is bid work or negotiated, he says. Owning our equipment makes us more competitive. We are not dependent on renting machines or getting them from someone else. We can match the equipment to the job. Thats a big key to being productive and efficient. Plus, we arrive at the job with dependable equipment that doesnt break down, even in a difficult work environment. We are not constantly trying to keep a machine running. As a company that is on the front-end of a schedule, we need to get in, do our job and get out so others can follow.
Owning our equipment makes us more competitive. We are not dependent on renting machines or getting them from someone else. We can match the equipment to the job. Thats a big key to being productive and efficient.
Scott McPherson, McPherson Wrecking
Demolition lineup
Among the equipment that helps keep McPherson Wrecking, Inc. working efficiently are eight Bobcat skid-steer loaders and two compact excavators. The machines, purchased from White Star Machinery in Topeka, Kan., are able to handle a variety of on-site demolition duties because the company also owns about two dozen Bobcat attachments. We have been extremely pleased with our Bobcat equipment, says McPherson, who manages project bidding for the Topeka-based company. The machines have proven to be very durable in difficult working conditions. At the same time, Bobcat attachments are every bit as tough as the loaders and excavators. Other Bobcat attachments include a Brushcat rotary cutter, drop hammer, planer, scraper, vibratory roller, pallet forks, excavator trenching buckets, three industrial grapples, four hydraulic breakers and eight additional loader buckets. Whether we are busting concrete with a breaker, tearing down a wall with a grapple or removing tile with a scraper, all of our Bobcat attachments stand up to the job. If they werent tough and durable, we wouldnt keep buying them.
Much of our work is repeat business with government agencies, school districts and general contractors, McPherson says. Whether it is a total demolition project or selective, they know we bring reliability to the job. Our Bobcat equipment is an important part of what makes us successful.
Members of the McPherson family: (back row, left to right) grandson Mitch, son Scott, son Craig, son Shannon and grandson Shannon Jr. Front row are Sara and Virgil. Not pictured is grandson Laramie.
Visit www.MyWorkSaver.com/attachments to find a complete list of Bobcat attachments, compatible carriers, pictures and videos (for select attachments).
41
SUCCESS STORY
ATTACHMENTS
INTRODUCTION
5600 5610
42
While no piece of equipment can do more, versatility only tells part of the machines story. Look at the performance side and the comfort features and you will see more reasons why the Toolcat 5600 and 5610 are in a class by themselves.
40+ ATTACHMENTS
In most cases, superior performance is based on what the Toolcat machines can accomplish with more than 40 approved attachments and implements. You can use the 5600 for dozens of jobs, from snow removal to sweeping to installing fences. With the Bob-Tach attachment mounting system, one person can change frontmounted attachments in minutes. For even easier attachment changes, the Power Bob-Tach system is available as an option. The 5610 allows you to use front-mounted attachments, as well as PTO and rear remote hydraulics to power Category 1, 3-pt. hitch implements or attachments.
Less damage helps prevent costly repairs after the job is complete. The precise maneuverability of allwheel steer enables you to work in confined spaces, and the hydrostatic drive system provides excellent traction on snow, ice and loose gravel.
HIGH-PERFORMANCE UNITS
Toolcat utility work machines have been designed and built by Bobcat Company in Bismarck and Gwinner, N.D., to deliver top performance in a wide range of applications. Excellent lifting and pulling capacity, fast travel speed (up to 18 mph), superior pushing power and traction, multi-attachment and implement capabilities and outstanding cargo capacity combine to make the Toolcat machines perfect for buildings and grounds, agricultural and homeowner with acreage applications. The 5600 can haul 2,000 pounds of tools, materials and supplies in the 17-cubic-foot cargo box. Unload the box in seconds without exiting the cab with the hydraulic dump. Towing capacity is 4,000 pounds to quickly transport trailered supplies and light equipment.
RIDE IN COMFORT
CARGO CONVENIENCE
Doing double duty is standard for the Toolcat machines. For example, the 5600 can use an attachment such as an auger or trencher on the front and carry supplies such as fencing, trees and shrubs, and irrigation materials in the cargo box. Another option for the 5600 is a snow attachment on the front and a Bobcat salt and sand spreader in the box. These types of jobsite combinations can save a vast amount of time and work. In addition to delivering superior performance, Toolcat utility work machines are easy on existing surfaces because of the all-wheel steer feature. The feature is activated by simply pressing a button to transition from front-wheel steer to all-wheel steer.
A utility work machine can reduce the size of your fleet because it can do the jobs of other pieces of equipment, eliminating the cost of maintaining multiple machines. Talk to your local Bobcat dealer to experience the difference a Toolcat utility work machine can make around your business and property.
Visit www.MyWorkSaver.com/toolcat to see a complete list of approved attachments for Toolcat utility work machines.
43
Automotive-type cab features, including foot pedals, adjustable seat and adjustable tilt steering wheel provide the type of environment that helps maintain productivity throughout the day. Optional heat and air conditioning add even more comfort. The driver and passenger can count on a smooth ride, even at the maximum travel speed, because Toolcat utility work machines have an independent suspension system, long wheelbase and more wheel-to-ground contact. Visibility from inside the cab is outstanding, an important feature at all times, but particularly valuable when mowing, sweeping and plowing snow.
INTRODUCTION
SPECIFICATIONS
5600
attachments Room for two, 40+ front-mounted . ling hau for and a cargo box
Engine 61 hp turbo diesel (45,4 kW) Operating weight 5685 lb. (2578 kg) Loader rated operating capacity 1500 lb. (680 kg) Auxiliary hydraulic flow 18.9 gpm (71,5 L/min) High-flow option 27.9 gpm (105,6 L/min) Maximum cargo box load 2000 lb. (905 kg) Machine rated capacity 2200 lb. (996 kg)* Total machine rated capacity 4200 lb. (1901 kg)** Towing capacity 4000 lb. (1814 kg) Transport speed 18 mph (30 km/hr)
5610
front-mounted Multi-tasking machine excels with lements. imp d unte -mo attachments and rear
Engine 61 hp turbo diesel (45,4 kW) Operating weight 5835 lb. (2646 kg) Loader Rated operating capacity (with 3-pt. hitch) 1500 lb. (680 kg) Auxiliary hydraulic flow 18.9 gpm (71,5 L/min) High-flow option 27.9 gpm (105,6 L/min) 3-Point hitch capacity (24 in. behind lift points) 1175 lb. (805 kg) Machine Rated Capacity 2200 lb. (996 kg)* Total machine Rated Capacity 4200 lb. (1901 kg)** Towing Capacity 4000 lb. (1814 kg) Transport Speed 18 mph (30 km/hr)
* Machine rated capacity: combined weight of load on lift arm, cargo box load, operator and passenger. ** Total machine rated capacity: combined weight of load on lift arm, cargo box load, operator, passenger and tow weight if equipped with a hitch.
Exceptional maneuverability
With the press of a button, Toolcat utility work machine operators can switch into all-wheel steer mode. Four steerable axles deliver a tighter turning radius than a compact tractor, utility vehicle or pickup truck for better maneuverability, particularly when working in tight areas. All-wheel steering also minimizes tire wear while working on asphalt or concrete, and protects sensitive surfaces such as grass or turf. When operators are done working in all-wheel steer mode they can easily switch back to front-wheel steer by pressing the same button.
44
The Toolcat machines are used every day, 12 months of the year.
Ed Koble, University of North Dakota
An early start
While most students are sleeping, Koble and his employees get an early start when it snows. We start clearing snow at 2 a.m. and need to have the inner campus done by 7 a.m., Koble says. We have 27 miles of sidewalks and 130 acres of parking lots. Normally we get about 39 inches of snow in Grand Forks and, although last winter (20112012) we had just 20 inches, we have been averaging about 60 inches for the past 15 years. A few years ago we had 79 inches. In addition to the two Toolcat machines, Kobles department also owns four Bobcat skid-steer loaders two smaller ones for clearing sidewalks and two larger loaders that his employees operate with a snowblower attachment to clear parking lots. All of his Bobcat equipment is utilized to its maximum potential. The Toolcat machines are used every day, 12 months of the year, Koble says. We have Bobcat angle brooms, blades and snowblowers for them, and they get a lot of hours.
We can put two people in them, put shovels and rakes in the cargo box, or we can put dirt in the box and haul it, Koble adds. In the winter we place Bobcat sand and salt spreaders in the cargo box. With a front-mounted snow removal attachment and a salt and sand spreader in the cargo box, the Toolcat 5600s are a complete snow and ice removal system.
Loyalty to Bobcat
We tried other equipment, but weve stuck with Bobcat because the company has been good to us, especially our local dealer, Bobcat of Grand Forks, Koble says. My employees are familiar with Bobcat machines, and its easier to stay with a trusted brand. Bobcat equipment is top-notch. And its a big deal for us that theyre made right here in North Dakota. Bobcat skid-steer loaders and Toolcat machines are both manufactured in Gwinner, N.D.
Visit www.MyWorkSaver.com/Toolcat to learn more about Toolcat utility work machines. Click on the attachments tab to read about the 40-plus attachments approved for Bobcat utility work machines.
45
SUCCESS STORY
ATTACHMENTS
Angle Broom
Three widths: 48, 68 and 84 in. With fingertip controls, hydraulically angle the 68- and 84-in. models NEW: heavy-duty orange bristles available; longer-lasting, durable bristles Also Compatible With CT CTL MTL SSL TH
Seeder
Application rate of more than 2 acres per hour and rear rollers that cover the seed 4-bushel hopper 72-in. seeding width; variable seeding rate Also Compatible With CT CTL SSL (V417 only)
Auger
For efficient installation of fence posts, planting trees or digging footings Six models available; drills 6- to 42-in. holes Unique knuckle-joint design helps ensure plumb-line accuracy Also Compatible With CT CTL MTL MX SSL TH
Soil Conditioner
Separate rocks and debris, grade, level, fill, pulverize clumps of dirt; and tear out old sod Eight hydraulic models, including high-ow hydraulics Optional hydraulic depth control and hydraulic angle Also Compatible With CT CTL MTL SSL TH (V417 only)
Buckets
Bolt-on teeth and cutting edges are available for most buckets Bolt-on bucket spill guard for construction/industrial, low profile, and snow and light material buckets Advantage videos available
Sprayer
40-gal. and 80-gal. tanks available for Toolcat 5600 Boom height adjusts to match height of vegetation Hand wand makes easy work of spot-spraying
Landscape Rake
Rake and collect surface debris while smoothing and leveling the soil It picks up rocks -inch and larger and most -inch rocks Two models: 60- and 72-in. working widths Also Compatible With CTL SSL TH (V417 only)
SP12 Spreader
Mounted in the cargo box of a Toolcat 5600 utility work machine Dash-mounted control adjusts auger and spinner to spread material from 5 to 40 ft. Corrosion-proof, all-poly construction
Snow pusher Snow V-blade Snowblower Snowblower (3-pt.)* Sod layer Soil conditioner Soil conditioner (3-pt.)* Stump grinder Sweeper Three-point hitch adapter Tiller Tiller (3-pt.)* Tilt-Tatch accessory Tine rake (3-pt.)* Trencher Water kit
Page 39 Page 39 Page 39 Page 59 Page 39 Page 39 Page 59 Page 40 Page 40 Page 40 Page 40 Page 59 Page 40 Page 59 Page 40 Page 40
46
Visit www.MyWorkSaver.com/TC/att for more information about all 49 Bobcat attachments approved for Toolcat utility work machines.
UTILITY VEHICLES
Get more work done faster with a Bobcat utility vehicle
A more efficient way to get work done, travel across challenging terrains and haul cargo can be accomplished with a Bobcat utility vehicle. Choose from four models, including three with four-wheel drive, to quickly get from Point A to Point B for applications such as agriculture, homeowners with acreage or buildings and grounds.
47
INTRODUCTION
INTRODUCTION
PERFORMANCE
Making work easier is priority one for Bobcat utility vehicles. It starts with a sturdy frame, durable components and high horsepower. An electronic fuel ignition, available on gasolinepowered Bobcat 3400 and 3400XL models, provides smooth starts and rapid acceleration, and it adjusts to temperature and altitude changes to maintain peak performance. Available with gas or diesel engines, Bobcat utility vehicles have ample horsepower to deliver speed, acceleration and power when its needed most. Travel up to 30 miles per hour to reduce travel time and complete projects faster. Choose between low-range for maximum torque or towing heavy loads. For faster speeds when the load is light, use the high-range. Utility vehicles are a more effective way of transporting passengers and materials than all-terrain vehicles, and they use less fuel and are more compact than pickup trucks. Bobcat utility vehicles offer owners a spacious cargo box to haul up to 1,100 pounds. A 2-inch receiver hitch is available to pull a trailer with additional cargo.
or turf. In four-wheel drive, if the rear wheels start to lose traction, the front wheels engage to power through difficult terrain. In two-wheel drive, the rear differential is locked for added traction on soft ground or gravel, and both wheels spin independently, resulting in minimal ground disturbance when turning. Turf mode is ideal for minimal ground disturbance on established or sensitive surfaces.
Abundant accessories
Bobcat offers numerous options and accessories to customize utility vehicles. Below are some of the most commonly requested:
UTILITY VEHICLES
COMFORTABLE RIDE
The four-wheel independent suspension on Bobcat utility vehicles contributes to a comfortable ride for the driver and passengers. Each wheel moves independently to keep the wheels in contact with the ground for maximum traction and exceptional comfort. An adjustable rear suspension allows the driver to customize the mounting position; vertically for heavy-duty hauling or angled for improved comfort. Easy entry and exit, ergonomic controls, low-effort steering, comfortable seats and a quiet engine help contribute to excellent operator and passenger comfort. Add an optional cab and heat for cold weather comfort, whether its checking on cattle, hauling fire wood or clearing snow.
Turn to page 33 to find specs for Bobcat utility vehicles. Visit www.MyWorkSaver.com/UTV for additional resources. Choose the Build & Quote tool to configure a Bobcat utility vehicle and request a quote. Demonstrations are available upon request from a local Bobcat dealer.
Enclosed cab with heat Bench seat for additional seating Powered lift for cargo box Radio and speakers Brush guard Turn signals and flashers Winch Tool holder mount Poly windshield Canopy top
TOP: The Bobcat 3400 utility vehicle with camouflage package is ideal for outdoor enthusiasts. RIGHT: The sporty Bobcat 3400 limited edition utility vehicle has a unique decal and color scheme. Visit your local Bobcat dealer to see these utility vehicles in person.
48
3200
3400
4x2 utility The fuel-efficient, gas-powered 3200 acreage with vehicle is ideal for homeowners . ions licat app or commercial
-wheel drive The 3400 utility vehicle offers four h terrain. toug ugh thro to help operators power
Engine 29 hp gas (21,6 kW) Vehicle rated capacity (payload) 1600 lb. (726 kg)* Cargo box load capacity 1100 lb. (500 kg) Travel speed (high) 30 mph (48 km/hr) Operating weight 1375 lb. (624 kg)
Engine 32 hp gas (23,8 kW) or 24.8 hp diesel (18,4 kW) Vehicle rated capacity (payload) 1600 lb. (726 kg)* Cargo box load capacity 1100 lb. (500 kg) Travel speed (high) 30 mph (48 km/hr)** Operating weight 1440 lb. gas (653 kg); 1610 lb. diesel (839 kg)
3400XL
a second row Transport up to six occupants with ing. and optional bench seat
Engine 32 hp gas (23,8 kW) or 24.8 hp diesel (18,4 kW) Vehicle rated capacity (payload) 1850 lb. (839 kg)* Cargo box load capacity 1100 lb. (500 kg) Travel speed (high) 30 mph (48 km/hr)** Operating weight 1673 lb. gas (759 kg); 1880 lb. diesel (853 kg)
3450
a traditional utility Three approved attachments turn vehicle into a versatile tool carrier.
Engine 24.8 hp diesel (18,4 kW) Vehicle rated capacity (payload) 1600 lb. (726 kg)* Cargo box load capacity 1100 lb. (500 kg) Travel speed (high) 30 mph (48 km/hr)** Operating weight 1864 lb. (845 kg) Approved front-mounted attachments bucket, pallet fork and snow blade
* Vehicle rated capacity (payload) is the combined weight of passengers, cargo box load and accessories on level surface only. ** Travel speed of 35 mph is available and requires an optional dealer-installed kit. Additional safety equipment may be required. Check with a local Bobcat dealer for more details.
49
UTILITY VEHICLES
SPECIFICATIONS
SUCCESS STORY
Rapid responders
Tampa Fire Rescue purchased five Bobcat 3400XL 4x4 utility vehicles for quick responses, and to gain access to areas larger fire equipment cannot during special events After a thorough evaluation of utility vehicles, Bobcat models rose to the top of the list for officials with the City of Tampa (Fla.). Based on the results of an in-depth assessment, Tampa Fire Rescue purchased five new Bobcat 3400XL utility vehicles. This is our first Bobcat equipment purchase, says Frank Pfister, specifications officer for the Tampa Fire Rescue. After the City of Tampa did an on-site evaluation of many different manufacturers of this type of vehicle, it was determined that Bobcat utility vehicles fit our needs. The City of Tampa conducted its on-site evaluation prior to the 2012 Republican National Convention in August. Bobcat utility vehicles provided by the local dealer proved to be the best solution. After the evaluation, the citys police department purchased 18 Bobcat 3400XL utility vehicles for security purposes. Pfister is responsible for supervising, overseeing and coordinating Tampa Fire Rescues fleet vehicle inventory, including vehicle specifications and purchases. Hes also responsible for Tampas fire stations and support facility, including property improvements, repairs and construction. Pfister says the 3400XL operators have told him that the vehicles are well-built and easy to operate. Bobcat utility vehicles are necessary to respond quickly to areas where normal fire equipment cannot get to during special events, he says. The Bobcat 3400XL is just 60 inches wide and can travel up to 30 miles per hour. Bobcat 3400XL utility vehicles have two rows of seating and can transport up to six occupants with optional bench seats. Tampa Fire Rescue purchased the stretch utility vehicles with the following options: brush guard, canopy, windshield and mirror kit.
Tampa Fire Rescue employee Frank Pfister stands next to the departments Bobcat 3400XL utility vehicles.
UTILITY VEHICLES
training tools
Frank Pfister says training materials provided by his Bobcat dealer were helpful, especially since this was his first Bobcat machine purchase. Tampa Fire Rescue places safety as a top priority, he says. We have a comprehensive training division that has ongoing training to keep our employees safe. We used the Bobcat utility vehicle operation and maintenance manual as part of our employee training program. In addition to the manual, Bobcat Company offers an online utility vehicle safety video. The 13-minute safety video provides operators with the essentials of safe and proper operation of utility vehicles. Visit www.Bobcat.com/trainings to review the complete list of Bobcat Company training and safety resources.
50
TELEHANDLERS
A Bobcat telehandler is the smart choice for jobs requiring greater lift height, reach and capacity
Working efficiently can be difficult at times when the job requires greater lift height, reach and capacity than a traditional skid-steer or compact track loader can provide. Enter the Bobcat V417 telehandler, the perfect machine for lifting farther and carrying more at construction sites, agriculture and agribusiness applications, and landscaping projects.
There is a lot to like about the V417 telehandler. With a single loader-style hydraulic joystick that operates the boom and attachment functions, the V417 is Two methods of transmission operation designed for top production. Variableare controlled by a simple mode switch. control thumb wheels on the joystick One is for applications needing higher operate the boom and auxiliary hydraulic wheel torque, such as pushing or loading functions. One shuttle lever controls a truck. The other is for normal working forward and reverse and high or low conditions. Three steering modes provide settings. Use the other lever to operate job-matched options: all-wheel steer for turn signals, horn and high-beam road tight turning, front-wheel steer for road lights. The steering wheel is similar to travel (15 mph top speed) and crab-steer what is found in many pickup trucks. for positioning loads from side to side. The V417 is a high-performance machine thats built to handle the toughest projects with ease. Its right 20+ ATTACHMENTS at home when the job calls for loading, digging, grading, backfilling, handling More than 20 approved Bobcat loader and placing materials, moving bales, attachments enable the telehandler to sweeping, working around waste transfer take on a large number of jobs, ranging stations, mulching and removing snow. from loading and lifting to ground Its also a valuable addition to any preparation. Change attachments rental fleet. quickly and easily with the Bob-Tach attachment mounting system.
Easy to operate
STURDY FRAME
The extendable, low-profile, two-stage boom has a lift height of 17 feet, 2 inches and a maximum reach of 10 feet, 4 inches. The two-section boom protects cylinders, hoses and lines. Its low-mounted position provides good all-around visibility. A light, rigid, unitized frame is strong enough to lift more than 4,400 pounds. Thats as much as heavier machines in its class. A 6-foot-wide frame and a height of just 6 feet, 5 inches allow the machine to work in and maneuver around confined spaces. A fully enclosed cab, which is more than 36 inches wide, has heat and air conditioning, a standard suspension seat and rear and left-side windows that open.
V417
are approved for Select Bobcat loader attachments atility. vers its nd exte to 7 the V41
Maximum load capacity 4400 lb. (1996 kg) Engine 75 hp Tier 3 diesel (56 kW) Lift height 17 ft. 2 in. (5,2 m) Maximum reach 10 ft. 4 in. (3,1 m) Rated lift capacity 4400 lb. (1996 kg) Operating weight 10648 lb. (4830 kg) Auxiliary hydraulic flow 22 gpm (83,3 L/min)
51
TELEHANDLER
SPECIFICATIONS
SUCCESS STORY
TELEHANDLER
The Bobcat V417 telescopic tool carrier helps Erik Timmermans with tasks that require a compact machine with more reach and higher lifting abilities.
When immigrant Case Timmermans came to British Columbia from his native Netherlands in 1976, he was mesmerized by the spectacular scenery and lush landscape surrounding the Vancouver metropolitan area. Shortly thereafter, he realized that it was his love of nature and heartfelt desire to be a landscaper that prompted this Dutch native to pursue his professional calling. So, in 1977, with a wheelbarrow, a shovel and a whole lot of energy and determination, his dream came true when he founded Timmermans Landscaping in the city of Abbotsford, British Columbia. He was later joined by his brother Erik, who helped Case grow the business. Today, more than 35 years later, Timmermans Landscaping the company that still bears his name and remains familyowned and operated is one of the most successful commercial and residential landscaping companies in the Vancouver area.
52
Buckets
Choose from general purpose, rock, or snow and light material buckets for Bobcat telehandlers Multiple sizes available Easily attach to V417 Bob-Tach attachment mounting system
Approved for use with V417 Hydraulic cylinders angle the moldboard left or right 30 degrees Five standard-duty models: 54, 60, 72, 84 and 96 in. Three heavy-duty models: 86, 96 and 108 in. Also Compatible With CT CTL MTL SSL UTV UWM
Grapple (industrial)
Approved for use with Bobcat V417 Move items such as brush, logs and landscape boulders Eight models from 36 to 80 in. Also Compatible With CTL MTL SSL
Snow Pusher
Grapple (root)
Approved for use with Bobcat V417 Design allows dirt to fall between the teeth to minimize topsoil removal for lighter and fewer loads Five models from 36 to 82 in. Also Compatible With CTL MTL SSL
Snowblower
Approved for use with Bobcat V417 Several different widths: 36 to 84 in.; standard or high-flow models available Replaceable bolt-on cutting edges A rotating chute directs snow where you want to place it Also Compatible With CT CTL MTL SSL UWM
Grapple (telehandler)
As either a grapple bucket or grapple fork, easily pick up and move difficult-to-handle materials Industrial fork grapple: 78 and 90 in. Industrial grapple buckets: 74, 80 and 90 in.
Tilt Carriage
When working on uneven ground you can level the tilt carriage to align with the angle of the pallet Two sizes: 48 and 60 in. Oscillates 15 degrees right or left
Landscape Rake
Rake and collect surface debris while smoothing and leveling the soil It picks up rocks -inch and larger and most -inch rocks Two models: 60- and 72-in. working widths Compatible Equipment CTL SSL TH (V417 only) UWM
Truss Boom
Keep construction jobs rolling along by picking and placing trusses with a Bobcat telehandler and this rugged 12-foot boom
Pallet Fork
Lift, carry and place materials easily with a pallet fork and Bobcat loader Five models Optional heavy-duty pallet fork and frame available Also Compatible With CT CTL MTL SSL UTV UWM
Telehandler attachments
Visit www.MyWorkSaver.com/TTC/att for information about all 27 Bobcat attachments approved for Bobcat telehandlers.
53
TELEHANDLER
Approved for use with V417 Clear snow quickly and efficiently from parking lots and driveways Two models: 96 and 120 in. Standard rubber or dealer-installed polyurethane cutting edge
ATTACHMENTS
Snow Blade
INTRODUCTION
COMPACT TRACTORS
Bobcat compact tractors provide labor-saving solutions on farms, acreages, landscaping projects and campuses, helping you get more done in less time
Combining durability, power and comfort into a compact footprint, Bobcat tractors are increasingly popular in the Bobcat family of equipment. Bobcat has seven tractor models, ranging from 22 to 49 hp, and dozens of attachments and implements to further maximize productivity all from the company that invented the compact equipment industry more than 50 years ago.
54
Operate in comfort
Operator comfort sets Bobcat compact tractors apart from others. Take a seat in any model from the CT122 to the CT450 and its standard suspension seat limits vibration when traveling over rough terrain. These adjustable seats can be shifted forward or backward to easily reach the pedals, controls and steering wheel. Tilt steering on all Bobcat tractors lets you adjust the steering wheel to your preferred angle. Controls were also designed with ergonomics in mind. An integrated joystick design, logical control placement and hanging foot pedals all contribute to an operating experience that complements the body and keeps the focus on the task.
work in a barn, open a gate or connect an implement, its important to have easy access to the operator area. A fully integrated joystick control means you can enter and exit the tractor from either side with no obstruction, and climbing on board is made even easier with fender-mounted grab handles that provide a solid grip.
Local Dealers
More than 400 Bobcat tractor dealers in North America provide sales, service and parts support, as well as training resources. Visit a local dealer to test drive a Bobcat compact tractor.
Read more about Bobcat compact tractors on the following pages. Turn to page 33 for complete specification listings or go online to www.MyWorkSaver.com/tractor for additional information. Check out the Build & Quote tool to customize a Bobcat compact tractor, and get a quote from your local dealer.
Unmatched performance
Bobcat compact tractors are built to be some of the heaviest tractors on the market, and its why they perform so well. The robust construction originates from a design that specifies heavy-duty axles, transmissions, undercarriages and frames. The solid components add durability and help transfer more horsepower to the ground for maximum traction when pushing and pulling. The hefty front axles contribute to industryleading lift capacities, enabling them to carry more material.
Easy-to-use controls
Bobcat compact tractors are simple to operate with automotive-influenced controls that are easy to use. Colorcoded knobs on the control handles are quick to identify and placed within easy reach. When you load a bucket,
CT445
55
COMPACT TRACTORS
INTRODUCTION
SPECIFICATIONS
COMPACT TRACTORS
t-duty chores and The CT122 is ideal for tackling ligh doors. passing through tight gates and barn
Engine 22 hp (16,4 kW) PTO Horsepower 16.2 hp (12,1 kW) Operating weight 2026 lb. (919 kg) Loader lift Capacity 744 lb. (337 kg)* 3-PT. Lift Capacity 860 lb. (390 kg)** Speed Two forward travel speeds; top speed is 9.3 mph (15 km/hr)
copic lower links, Quickly change implements with teles er models. larg and available on the CT225
Engine 27 hp (20,1 kW) PTO Horsepower 19.5 hp (14,5 kW) Operating weight 3028 lb. (1373 kg) Loader lift Capacity 1108 lb. (503 kg)* 3-PT. Lift Capacity 1508 lb. (684 kg)** Speed Three forward travel speeds; top speed is 13.1 mph (20,9 km/hr)
CT225
Attachments shown: Bucket and tiller
CT122
CT230
euverability to the The CT230 delivers power and man of tasks. ety acreage or jobsite for a vari
Engine 30 hp (22,4 kW) PTO Horsepower 22 hp (16,4 kW) Operating weight 3056 lb. (1386 kg) Loader lift Capacity 1108 lb. (503 kg)* 3-PT. Lift Capacity 1508 lb. (684 kg)** Speed Three forward travel speeds; top speed is 13.1 mph (20,9 km/hr)
CT235
d flexibility The CT235 has live PTO for improve nts. leme when operating 3-pt. hitch imp
Engine 34 hp (25,4 kW) PTO Horsepower 26.5 hp (19,8 kW) Operating weight 3056 lb. (1386 kg) Loader lift Capacity 1108 lb. (503 kg)* 3-PT. Lift Capacity 1508 lb. (684 kg)** Speed Three forward travel speeds; top speed is 13.1 mph (20,9 km/hr)
* Loader lift capacity is measured at 500 mm in front of bucket with rear ballast, equipped with a pin-on bucket. ** 3-pt. lift capacity is measured at 24 inches behind lift point. HST: hydrostatic transmission
56
Available
CT440
CT445
can power The CT440s hydrostatic transmission projects nds grou commercial landscaping or your t. prin foot pact com a around home within
lable for the CT445 A Shuttle Shift Transmission is avai ating speeds. oper of e and CT450 for a wide rang
Engine 45 hp (33,6 kW) PTO Horsepower 34 hp (25,4 kW) HST; 36.5 hp (27,2 kW) SST option Operating weight 3881 lb. (1760 kg) HST; 3914 lb. (1775 kg) SST option Loader lift Capacity 2030 lb. (921 kg)* 3-PT. Lift Capacity 1870 lb. (848 kg)** Speed Three forward travel speeds; top speed is 16.5 mph (26,5 km/hr)
Shuttle Shift Transmission
Engine 41 hp (30,6 kW) PTO Horsepower 30 hp (22,3 kW) Operating weight 3847 lb. (1745 kg) Loader lift Capacity 2030 lb. (921 kg)* 3-PT. Lift Capacity 1870 lb. (848 kg)** Speed Three forward travel speeds; top speed is 16.5 mph (26,5 km/hr)
CT450
Productivity boost
Front-mounted attachments and 3-pt. hitch implements turn Bobcat compact tractors into highly productive and versatile tools for accomplishing your project goals. Learn more about the Bobcat compact tractor lineup by turning to page 33 for complete product specification listings. Turn to page 59 for a list of attachments and implements for tractors. To take a quick digital look, visit Bobcat online at www.MyWorkSaver.com/att for more photos, videos and animations.
The CT450 comes standard with an d operator independent PTO for more improve nts. leme imp g usin n whe rol cont
Engine 49 hp (36,6 kW) PTO Horsepower 38 hp (28,3 kW) HST; 41 hp (30,6 kW) SST option Operating weight 3881 lb. (1760 kg) HST; 3914 lb. (1775 kg) SST option Loader lift Capacity 2030 lb. (921 kg)* 3-PT. Lift Capacity 1870 lb. (848 kg)** Speed Three forward travel speeds; top speed is 16.5 mph (26,5 km/hr)
Shuttle Shift Transmission
57
COMPACT TRACTORS
SPECIFICATIONS
SUCCESS STORY
COMPACT TRACTORS
Full-service landscaping
A visit to the companys website (www.buckleysprairielandscaping.net) shows a prospective customer that Velten has the horsepower and hands-on expertise to construct everything from hardscapes and landscapes to water features and entire lawns much of it with the Bobcat compact tractor, loaders and attachments. The loaders also contribute to the companys reputation as one of the capital citys top snow removal operations. The loaders are typically equipped with a snow blade or snow pusher to help clear commercial parking lots. Back in college, Velten only imagined how diverse his operation could become. I couldnt do what I do now without dedicated staff and Bobcat equipment. The versatility of the machines and the power they have for their footprint is very good, and the compact tractors always going to have its place. Velten says.
The tractor finishes grades on yards much quicker than putting attachments on a loader, because the gradings done behind you and youre not driving over it again.
Wade Velten, Buckleys Prairie Landscaping
Ideal fit
Velten points out that the 41-hp tractors compact size and 3-point lift capacity is an ideal fit to his customers residential properties, which typically average 8,000 to 10,000 square feet of turf, but its also often used on 3- to 5-acre sites. If youre grading 10 yards in a week with a small tractor, youre really going to beat a little unit up, he says. Even though the CT440s footprint is compact, you dont have to run it full throttle and you get longer life out of the machine, Velten says. Prior to owning Bobcat, Velten owned other brands, but prefers the Bobcat tractor and its hydrostatic transmission for preparing seed beds. It has a low profile and is very powerful, he says. When youre in a higher gear where you need to move a little quicker, it works very efficiently.
A Bobcat compact tractor complements Wade Veltens skid-steer loader and compact track loader for landscaping assignments.
58
Mid-mount Mower
Two models with cutting widths of 54 and 66 in. Anti-scalp wheels minimize lawn damage Comes standard with side discharge and solid rubber wheels Compatible Equipment CT
A new front-mount angle broom is available for use with Bobcat compact tractors Two widths: 68 and 84 in. Powered by the mid-PTO and requires a lift kit
Compatible Equipment CT
Snowblower 3-pt.
Three widths: 54, 66 and 72 in. Two-stage design to handle heavy snowfalls Optional hydraulic chute rotation helps to place snow Compatible Equipment CT 5610
Sprayer 3-pt.
60-gal. 3-pt. model for compact tractors Compatible Equipment CT
Front-end Loader
Use for digging, grading and loading 74.6- to 111.7-in. lift height 744- to 2030-lb. loader lift capacity** Available with Bob-Tach mounting system for easy hookup and removal of approved attachments Compatible Equipment CT
Tiller 3-pt.
Break ground; prepare soil for planting; amend soil with fertilizer, manure or mulch Tines rotate in the same direction as the tires when the tractor is moving forward Tiller side-shifting is eliminated Compatible Equipment CT 5610
www.MyWorkSaver.com/CT
Backhoe Bale fork Bob-Tach mounted snow blade Bucket Digger Landplane Pallet forks Seeder Silt fence installer Snow blade Snowblower Soil conditioner Tilt-Tatch accessory Utility fork
* Requires front auxiliary hydraulics. Approved for use on CT440, CT445 and CT450 models. ** Loader lift capacity is measured at 500 mm in front of bucket pin with rear ballast and pin-on bucket.
EQUIPMENT KEY:
CT (Compact Tractor)
59
COMPACT TRACTORS
ATTACHMENTS
TRAINING RESOURCES
Prepare to perform
Operators handbooks Operation and Maintenance manuals Safety signs and decals Safety videos (available on DVD or for view on www.Bobcat.com) Operator training courses Service safety training courses Rent-It Safely brochures Rental condition and delivery reports AEM safety manuals
Skid-steer loaders Excavators Toolcat utility work machines Compact tractors VersaHandler telescopic tool carriers (telehandlers) Loader backhoes Loader radio remote control system Backhoe attachments Planer attachments
These training resources are prepared by product experts at Bobcat to make sure operators understand every aspect of their equipment.
Additionally, a maintenance DVD is available for Bobcat forestry cutter attachments. The video portions of these kits are available on DVD. Many of the kits are available in English and Spanish, and each kit includes course handbooks and an administrators guide. An operator training kit flyer is available online for download. Visit www.Bobcat.com/trainings to download the order form (PDF) and review a list of available training course kits and safety videos with part numbers that you can order from your local Bobcat dealer.
Visit www.Bobcat.com/trainings to find online resources available for proper operator training and safety materials.
Watch a short video to learn about training and safety materials available from Bobcat Company. Scan this code with your smartphone, using a code reader application available from your favorite app store. If you dont have a smartphone, visit www.MyWorkSaver.com/safety to watch the video.
60
Bobcat and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries. 2013 Bobcat Company. All Rights Reserved. | 1147WS-0
MAIL TO
PAID
S550 The
m-series
S59 0
New S205 The
S530 T h
51
0 The Ne w
S1
the most popular loaders of all time just got more m-pressive
T590
New S160
500 pl at fo r m
T5 5
50
FPO
S5
70
The
New S185
eN Th
ew
T1
90
The best is even better. The Bobcat S185 and T190 were the best selling skid-steer loader and compact track loader in North America for more than decade. Bobcat is excited to announce that these models and five others have been completely redesigned to increase performance, reliability and comfort. Visit myworksaver.com/500 or scan the code to see what makes these legendary loaders better than ever.
myworksaver.com/500
Bobcat and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries. 2013 Bobcat Company. All Rights Reserved. | 1213A-0