Tubes Catalogue

GENERAL TERMS AND CONDITIONS
General terms and conditions

DEFINITIONS
The company shall mean Tubes International Sp. z o.o.
with registered office at Bystra Street 15a, 61-366
Pozna, entered to National Court Register (KRS) kept
by District Court in Poznan, VIII Commercial under the
number: 0000124055, VAT number: 781-00-46-084,
share capital: 115.500 PLN.
The customer shall mean a buyer who made an
agreement to purchase products from the company
(verbal or written agreement).
The order shall mean a stated intention to buy specific
products or services.
The products shall mean the subject of an agreement
between the customer and the company.
Standard terms of sale of products and services offered
by the company are stated in the conditions given below.
No other terms will apply unless the parties agreed in
writing. The conditions of sale are also available at our
website and in all branches of the company.
the number of that offer must be included in the order

Following the above standards allows for precise and
fast completion of an order. The customer is always
responsible for giving the correct data both in an order
and in documents enclosed in an order. Each time an
order is submitted a written confirmation is sent (by fax
or email) within 7 days from the date of its submission
unless agreed differently. Execution of an order starts
either when confirmation is sent or according to the
agreements of a contract, but not earlier than before all
necessary documents are delivered by the customer
and before the payment conditions are met.
Delivery date is considered to be reached if the products
left the warehouse by the agreed time or the purchaser
was acknowledged that the goods are ready to be
sent. The delivery date can be postponed by reason of
a force majeure. The force majeure is the appearance
of obstacles that are not caused by the company
and cannot be overcome in any way. The company
acknowledges the customer immediately if any of the
above happens and tell the expected date of delivery.
GENERAL GUIDELINES
Catalogues, brochures, price lists and other publications
about products offered by the company are
issued only by means of indication and should not be
treated as trade offers as stated by the Polish law. Product
samples should be treated as trial and display materials.
All technical data included in the catalogues, price lists
and other advertising materials are approximate only and
are not binding unless clearly stated in an agreement.
The company owns copyright to all documents. The
customer must provide information needed to complete
an order successfully. It is customers responsibility to
provide details of working conditions in which ordered
items will be used, the quantity and the precise name
and address of both the purchaser and the delivery point.
The acceptation of the conditions of sale when placing
the first order means subsequent accepting them at all
following orders if the customer maintains regular trade
relations with the company.
DELIVERY
The company is obliged to deliver the products that meet
the conditions outlined in the confirmation of an order,
which include delivery date, quantity, type of products
and price. Any changes made in the delivery conditions
require written approval. When the products are passed
to the customer from the company warehouse or are
taken by a forwarders, all responsibility regarding any
gains or burdens connected with the products and
danger of its accidental loss or damage are transferred
to the customer. Delivery charges are not included in the
product prices. The products are delivered by forwarders
at the expense of the customer to the address indicated
in the customers order. The products delivered by the
company remain the property of the company until the
payment is made. The company reserves the right to
choose a forwarder and to refuse the return of any
products that are sent back by the customer without
any prior notice.
SALE OPTIONS
Two ways of sale of products and services are available:
- direct sale in the company branches,
- mail order when the goods are delivered by
forwarders.
PLACING AN ORDER
Placing orders can be done in two ways:
- verbally where a signature is a confirmation or in a
written form both during direct sale,
- in a written form, by fax or email when using mail
order.
When an order is placed, code numbers and precise
names of products must be taken from our latest
catalogue. If an order concerns an offer made earlier,
PAYMENT
Payment options:
- by cash or cheque (in case of a mail order, payment
is collected by forwarders),
- money transfer within 7 days from the date of an
invoice),
- money transfer (within 14 days from the date of an
invoice).
Any other conditions of payment are agreed upon
individually with a Sales Department Manager. Money
transfer is available for customers who have already
bought products from the company and provided
following:
- valid extract from National Court Register (KRS) or
Business Activity Register,
- copy of VAT number or REGON statistical number,

General terms and conditions - continuation
- a completed money transfer application (available in
our branches and at www.tubes-international.com).
If the customer does not pay on time or exceeds credit
limit, execution of orders paid with money transfer will
be suspended until all overdue payments are made by
the customer.
In case of overdue payments, the company has a right to:
- demand from the customer to pay interest for default,
- withdraw a contract and demand to return products,
- suspend order execution,
- suspend money transfer orders and withdraw granted
discounts,
- suspend all allowances the customer is entitled to
having the customer credit.
the complaint is to be resolved at longer time agreed

by both sides. The customer shall be informed about
the outcome of the complaint by mail, fax or verbally by
an authorized employee of the company or in any other
agreed upon way. If a complaint is acknowledged and
delivery of defect-free products is agreed, the goods
which are the subject
of a complaint should be sent back to the company. If
the complaint is resolved in any other way, the company
shall repair the defective product. The customers do not
have a right to eliminate defects themselves or have
someone else repair it at the expense of the company.
PRODUCT QUALITY AND WARRANTY
We do not allow the cession of rights resulting from any

agreement with the company to the third party without
the written permission of the company. For an agreement
to be completed, the customer has to accepts the right
of the company to process personal data for marketing
purposes. For issues not settled hereunder Polish law
applies.
The company shall try to settle all disputes resulting from
the agreements between the company and the customer
out of court. If the dispute is not settled out of court, a
court assigned to the city of Poznan decides.
The company guarantees meeting all technical

parame-ters of offered products. These technical
parameters are determined by the information outlined
in the sale correspondence (enquiry, offer, order, order
confirmation). The customer is fully responsible for
providing correct and detailed information regarding all
technical parameters (working conditions) of ordered
products. Proper attests, certificates, letters of conformity
or other documents that confirm product quality are
provided with the product if such a requirement was
stated in the order. There can be additional charge for
those documents. The company will not accept liability
in the event of product failure caused by mechanical
damage, abuse of the products or when incorrect
technical parameters of the products were provided by
the customer. The company is not responsible for faults
resulting from defects not lying in the product itself. In
particular it is not responsible for faults resulting from
accidental damage or its results, damage done by
incorrect handling or storage by the customer or design
and implementation mistakes performed by the third
party. The warranty shall not apply to defects resulting
from incorrect usage or modifications of the products
performed by the purchaser or the third party. In case
of justified claims in virtue of defects, the company will
not accept liability to compensate lost profits, production
loss, etc.
In case of machines and equipment sold by the company,
the warranty conditions are stated in a warranty card.
FINAL STATEMENTS
Owner
COMPLAINT PROCESS
Lodging a complain does not entitle the customer to
defer payment for the purchased goods or for its part.
The company has a right to postpone the performance
of provisions of a claim until all overdue payments are
settled.
The ground to lodge a complaint is an immediate
complain in writing to the company. The complaint must
include a detailed specification of the defect along with all
documents justifying the complaint. We aim to resolve all
complaints within 14 days of a receipt. If performance of
tests, examination or repair at manufacturer is needed,

How to choose the appropriate hose?
Flexible hoses are widely used in all branches of the industry. Appropriate selection means choosing a product
suitable for technical specification of certain application along with assurance of safe and faultless performance.
For these reasons, we advise to choose the appropriate hose with the help of Sales or Technical Department of
TUBES INTERNATIONAL
The appropriate hose selection is possible only when we have full information about working conditions of the
hose. The customer should provide such information in a written form.
Essential information for the appropriate hose selection:
- medium (substance conveyed),
- internal diameter,
- maximum working pressure,
- temperature (inside and outside of the hose),
- all other features that may affect hose performance and life such as: vibrations, deformations during work,
exposure for external damage, etc.,
- type of hose ends (type of fitting, thread size, type of sealing),
- way of assembling the hose fittings (clip, band, clamp),
- length of the hose (in case of a hose assembly the complete length of hose along with fittings).
Rules mentioned above also concern appropriate selection of different products such as couplings, valves,
fittings, etc.
Information and all technical specifications given in the catalogue were gathered with all possible care. However
there is a risk of mistakes. It was not possible to include all information on every product in our offer so please
contact our specialists from Sales and Technical Departments for further details.
We reserve the right to change all data given in the catalogue.
Pressure Equipment Directive 97/23/WE
After the accession of Poland into the European Union, an obligation were imposed on pressure equipment
producers to conform to Community legislation concerning safety and protection of health. The unification of
national legislation of each of the Member States in this respect is the only means of ensuring the free circulation
of goods in the internal market. The Pressure Equipment Directive 97/23/WE (PED) of 29 May 1997 is the most
important act laying down requirements for the free movement of the pressure equipment including flexible hose
assemblies. The Directive lays the rules for classifying the equipment into certain categories, the use of the CE
conformity marking, the conditions and procedures for conformity assessment. As far as Poland is concerned, it is
Minister of Economy provision of 21 December 2005 on basic requirements for pressure equipment and assemblies
composed of several pieces of pressure equipment that implements the resolutions of Directive 97/23/WE.
Regulations make a clear division between pressure equipment which demands affixing CE marking and pressure
equipment which does not require to be affixed with this marking, however in order to ensure its safe usage it
have to be designed and manufactured according to the guidelines of sound engineering practice. The equipment
that requires to be CE marked was divided into four categories (I, II, II, IV) taking into account increasing level of
danger caused by pressure, state of aggregation and the group of fluid (group 1 - dangerous fluids, group 2 - all
other fluids). There are detailed rules for defining pressure equipment categories and sound engineering practice
outlined in the regulations. Depending on the category, certain conformity assessment procedures apply which
may demand participation of an independent unit, called a notified body.
The manufacturer of complete pressure hose assemblies is fully responsible for assuring that the equipment satisfies the requirements of this Directive. It includes proper classification and affixing the CE marking. In order to
define the category of pressure equipment and to draw up a written (EU) declaration of conformity, when selecting
a complete hose assembly, a customer is obliged to give necessary information on the application of the assembly.
These essential details are as follows: nominal diameter (DN), maximum working pressure, concentration and
group of fluids - specified type of hazard (very toxic, toxic, health hazardous, caustic, irritant, explosive, oxidizing,
highly flammable, flammable, harmful for the environment).
TUBES INTERNATIONAL offers pressure hose assemblies classified into I and II category. They are affixed with
the CE marking and supplied with a written (EU) declaration of conformity. Flexible hose assemblies below the
limits given in the regulations are designed and manufactured in accordance with the sound engineering practice.
Attachment A
for P-4-04
ENQUIRY - INFORMATION CARD
company name:
post
code:
NIP:
city:
street:
tel:
fax:
e-mail:
contact person:
Technical requirements regarding the hose (hose assembly)
internal diameter:
inside temperature:
medium: (type of substance transferred within the hose)
concetration:
working pressure:
bar
ambient temperature:
type:
classification to 97/23/WE (mark X)::
liquid
gas
steam
food products
solid
dangerous - explosive (E)

dangerous - extremely flammable (F+)
dangerous - highly flammable (F)
dangerous - flammable (wt higher than
ignition temperature)
dangerous - very toxic (T+)
dangerous - toxic (T)
dangerous - oxidizing (O)
other
additional information:
(detailed description)
possible external damage to

the hose, external conditions:
instalation: dynamic / static:
(bending during work or lack of it)
additional requirements:
required quality documents:
third party inspections:
TDT
WDT
UDT
DNV
end fitting no 1: (type, size, material)
end fitting no 2: (type, size, material)
number of assemblies
/ complete length (mm):
expected delivery time:
GL
other
space for a drawing of a hose assembly, installation or additional remarks:
product used so far:

prepared by:
date, signature:
INDUSTRIAL HOSES - general purpose

Characteristics
General purpose hoses as the name suggest are widely used for: air, water, non-aggressive chemicals, oil and
fuel. Some of them are also used for food products. Made of such materials as: PVC, PU, rubber with a spiral,
braid or cord reinforcement (for pressure resistance). If PVC hose is chosen for a particular application the drop
of pressure in higher temperatures must be taken into consideration!
Fittings for general purpose hoses (see chapter COUPLINGS, VALVES, CLAMPS) must be assembled with the
use of ferrules (crimped with the use of crimping machines) clamps and worm drive hose clamps.
Hoses for different applications see in different chapters of INDUSTRIAL HOSES.
CPU
Material:
Soft, transparent polyurethane
Working temp.: From -30C to +70C
(with peaks up to +100C)
Characteristics: General purpose, highly flexible hose used for oils, greases, petroleum products, chemicals,
granulates and food substances (according to FDA 21 CFR 175.105 requirements). Designed
for no pressure or low pressure applications as well as used for protection.
code
I.D.
[mm]
O.D.
[mm]
CX-CPU-03
CX-CPU-05
CX-CPU-06
CX-CPU-08
CX-CPU-10
CX-CPU-13
3
5
6
8
10
13
6
8
9
11
16
19
bending
radius
[mm]
36
48
63
66
96
114
standard
length
[m]
30
30
30
30
30
30
RPU
Internal layer:
Reinforcement:
External layer:
Working temp.:
Transparent polyurethane
Polyester-nylon cord
From -30C to +70C
Characteristics: General purpose, highly flexible hose used for water, air, oils, greases, petroleum products,
chemicals, granulates and food products (according to FDA 21 CFR 175.105 requirements).
code
I.D.
[mm]
O.D.
[mm]
CX-RPU-06
CX-RPU-10
CX-RPU-13
CX-RPU-16
CX-RPU-19
CX-RPU-25
6,3
10
12,5
16
19
25
11,5
16
18,5
23
26
33
working
bursting
pressure 20C pressure 20C
[bar]
[bar]
19
60
16
53
14
35
11
38
9
35
7
28
weight
[kg/m]
0,10
0,14
0,18
0,24
0,28
0,41
standard
length
[m]
30
30
30
30
30
30
RAGNO CR
Internal layer:
Reinforcement:
External layer:
Working temp.:
Transparent PVC
Polyester cord
Transparent PVC
From -5C to +60C
Characteristics: General purpose, flexible, delivery hose. It is widely used for compressed air, slightly aggressive
chemicals, fluid and semi-fluid food substances such as water, beer, wine, juices, beverages,
alcohols up to 28% concentration. Not recommended for food substances containing oil and
fat as well as dairy products. In compliance with European Directive 1935/2004 CE (stimulant
A, B and C). Safety factor 3:1.
code
I.D.
[mm]
O.D.
[mm]
ME-RAGNO/CR-04
ME-RAGNO/CR-05
ME-RAGNO/CR-06
ME-RAGNO/CR-08
ME-RAGNO/CR-10
ME-RAGNO/CR-12
ME-RAGNO/CR-13
ME-RAGNO/CR-16
ME-RAGNO/CR-19
ME-RAGNO/CR-25
ME-RAGNO/CR-32
ME-RAGNO/CR-38
ME-RAGNO/CR-50
4
5
6
8
10
12
13
16
19
25
32
38
50
10
11
11
13
15
18
19
22
25
32
42
48
62
working
working
working
pressure 20C pressure 40C pressure 60C
[bar]
[bar]
[bar]
20
16
12
20
16
12
20
16
12
18
13
9
18
13
9
12
9
6
12
9
6
10
7
4
10
7
4
8
5
3
8
4
2
8
4
2
8
4
2
standard
length
[m]
100
100
100
100
100
50
50
50
50
50
50
50
25
WTZ
Internal layer:
Reinforcement:
External layer:
Working temp.:
Transparent PVC
Polyester cord
Transparent PVC
From -5C to +50C
Characteristics: General purpose, flexible hose. Widely used for household applications, in agriculture and gardening
industry. Available as a complete hose assembly (DN10) with the length of 10 or 15 meters with
pneumatic plug (DN 7,2) on one end and pneumatic socket (DN 7,2) on the other end.
code
I.D.
[mm]
PR-WTZ-08
PR-WTZ-10
PR-WTZ-12
8
10
12,5
PR-WTZ/P-10/10
PR-WTZ/P-10/15
10
10
O.D.
[mm]
working
pressure
[bar]
WTZ hose
12,5
15
14,5
10
17
12
WTZ-P hose assembly
14,5
10
14,5
10
bursting
pressure
[bar]
standard
length
[m]
60
40
48
50
50
50
40
40
10
15
RAGNO N 20-40 BAR

SUPER RAGNO N 80 BAR
Internal layer: PVC
Reinforcement: Polyester cord (single or double
depending on a version or on a diameter)
External layer: PVC
Working temp.: Up to +60C
Characteristics: Lightweight, flexible hose designed to transfer compressed air, water or slightly aggressive
chemicals. Widely used for compressors or in the agriculture industry to water, dew, irrigate
or to splash crops with pesticides or herbicides. External layer is resistant to abrasion and
weather conditions.
code
I.D.
[mm]
ME-RAGNO/N20-08
ME-RAGNO/N20-10
ME-RAGNO/N20-13
ME-RAGNO/N20-16
ME-RAGNO/N20-19
ME-RAGNO/N20-25
8
10
13
16
19
25
ME-RAGNO/N40-08
ME-RAGNO/N40-10
ME-RAGNO/N40-13
8
10
13
ME-RAGNO/N80-08
ME-RAGNO/N80-10
ME-RAGNO/N80-13
8
10
13
working
pressure 20C
[bar]
RAGNO N 20
13
20
15
20
19
20
23
20
26
20
34
20
RAGNO N 40
14
40
16
40
21
40
RAGNO N 80
15
80
19
80
23
80
O.D.
[mm]
bursting
pressure 20C
[bar]
standard
length
[m]
60
60
60
60
60
60
100
100
100
100
100
50
120
120
120
100
100
100
240
240
240
100
100
100
RAGNO PU
Internal layer 1:
Internal layer 2:
Reinforcement:
External layer:
Working temp.:
Abrasive resistant polyurethane

PVC + rubber compound
Polyester cord
PVC + rubber compound
From -15C to +60C
Characteristics: Very lightweight, flexible hose with a small bending radius and kink resistance. External layer is
highly resistant to ozone, fats, oils and slightly aggressive chemicals. Widely used for pneumatic
tools, spray guns, painting guns, sandblasting, etc. Suitable for hose reel applications. In
compliance with European Directive 1935/2004 CE (stimulant A, B and C).
code
I.D.
[mm]
O.D.
[mm]
ME-RAGNO/PU-06
ME-RAGNO/PU-08
ME-RAGNO/PU-10
ME-RAGNO/PU-13
ME-RAGNO/PU-16
6
8
10
13
16
10
12
15
19
23
working
pressure 20C
[bar]
20
20
20
20
20
bursting
pressure 20C
[bar]
60
60
60
60
60
standard
length
[m]
100
60
50
30
25
RP
Internal layer:
Reinforcement:
External layer:
Working temp.:
Transparent PVC
Polyester cord
Blue or red PVC
From -20C to +55C
Characteristics: General purpose, flexible, delivery hose. Widely used for water, compressed air, semi-aggressive
chemicals, fluid and semi-fluid food substances. Safety factor 3:1.
code
(red)
code
(blue)
I.D.
[mm]
O.D.
[mm]
CX-RP-06R
CX-RP-08R
CX-RP-10R
CX-RP-12R
CX-RP-19R
CX-RP-06BL
CX-RP-08BL
CX-RP-10BL
CX-RP-12BL
CX-RP-19BL
6,3
8
10
12,5
19
11,5
13,5
16
18,5
26
working
press. 20C
[bar]
20
19
16
15
13
bursting
press. 20C
[bar]
61
59
48
45
39
weight
[kg/m]
0,09
0,12
0,15
0,18
0,31
standard
length
[m]
30
30
30
30
30
CHANTIER
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black PVC
Polyester cord
Orange PVC
From -15C to +60C
Characteristics: General purpose, flexible, delivery hose used for water, air and slightly aggressive chemicals.
Fluorescent external layer provides good visibility in limited lighting conditions. Safety factor 3:1.
code
I.D.
[mm]
O.D.
[mm]
TR-CHANTIER-19
19
25,5
working
press. 20C
[bar]
9
bursting
press. 20C
[bar]
27
bending
radius
[mm]
225
weight
[kg/m]
0,29
standard
length
[m]
50
ARMORVIN INDUSTRY
Material:
Transparent PVC
Reinforcement: Steel wire helix
Characteristics: Robust, suction-delivery flexible hose designer to transfer water, semi-aggressive chemicals,
pest control products, etc.
code
I.D.
[mm]
ME-ARMIND-025
ME-ARMIND-032
ME-ARMIND-038
ME-ARMIND-045
ME-ARMIND-050
25
32
38
45
50
wall
thickness
[mm]
3,5
3,75
3,75
4,5
4,5
working
press. 20C
[bar]
4
3
3
2
2
vacuum
[bar]
0,8
0,7
0,7
0,6
0,6
bending
radius
[mm]
85
95
110
125
145
weight
[kg/m]
0,40
0,55
0,65
0,92
1,04
standard
length
[m]
60
60
30
30
30
ARMORVIN PRESS PU
Internal layer:
Reinforcement:
External layer:
Working temp.:
Smooth transparent polyurethane

Steel wire helix
From -20C to +90C
Characteristics: Lightweight, very flexible suction and delivery hose used for pneumatic and hydraulic applications
as well as to transfer chemicals and semi-fluid food substances (in compliance with FDA 21
CFR 177.2600 stimulant E and F). Resistant to oils and hydrocarbons.
code
I.D.
[mm]
ME-ARMPREPU-05
ME-ARMPREPU-06
ME-ARMPREPU-08
ME-ARMPREPU-09
ME-ARMPREPU-10
ME-ARMPREPU-12
ME-ARMPREPU-13
ME-ARMPREPU-14
ME-ARMPREPU-16
ME-ARMPREPU-18
ME-ARMPREPU-19
ME-ARMPREPU-20
5
6
8
9,5
10
12
13
14
16
18
19
20
working
wall
pressure
thickness
20C
[mm]
[bar]
2,5
20
2,5
20
2,7
18
3
18
3
17
3
16
3,1
15
3,2
14
3,5
14
3,5
12
3,5
12
3,5
12
bursting pressure
[bar]
20C
130
125
110
105
100
85
80
78
75
73
72
70
vacuum
[bar]
bending
radius
[mm]
weight
[kg/m]
standard
length
[m]
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
20
23
32
38
40
45
50
56
63
70
76
80
0,08
0,10
0,14
0,17
0,18
0,21
0,23
0,26
0,29
0,34
0,35
0,37
60
60
60
60
60
60
60
60
60
60
60
60
70C
28
26
24
23
23
21
20
19
18
17
17
16
ARMORVIN PU OIL
Internal layer:
Reinforcement:
External layer:
Working temp.:

Steel wire helix
Green transparent PVC
From -20C to +90C
Characteristics: Flexible hose designed to transfer food substances especially with fat or oil (e.g. olive oil)
contents. In compliance with European Directive 1935/2004 CE (stimulant D). Widely used
also for industrial oil, semi-aggressive chemicals and abrasive materials.
code
I.D.
[mm]
ME- ARMPUOIL-020
ME- ARMPUOIL-025
ME- ARMPUOIL-030
ME- ARMPUOIL-040
ME- ARMPUOIL-050
ME- ARMPUOIL-060
ME- ARMPUOIL-080
ME- ARMPUOIL-100
20
25
30
40
50
60
80
100
10
wall
thickness
[mm]
4,0
4,2
4,5
4,8
5,1
7
6,7
7,5
working
press. 20C
[bar]
5
5
4
4
4
3
3
2
vacuum
[bar]
0,8
0,8
0,8
0,8
0,8
0,8
0,7
0,7
bending
radius
[mm]
80
100
120
160
200
240
320
400
weight
[kg/m]
0,40
0,52
0,60
0,95
1,30
1,75
2,40
3,70
standard
length
[m]
30
30
30
30
30
30
30
30
ARMOFLEX PU
Internal layer:
Reinforcement:
External layer:
Working temp.:
Smooth, transparent polyurethane

Steel helix wire
Smooth, transparent PVC
From -20C to +80C
Characteristics: Lightweight, very flexible suction and delivery hose used for pneumatic, hydraulic applications
as well as abrasive materials transfer. Resistant to oils and hydrocarbons.
code
I.D.
[mm]
O.D.
[mm]
BG-4482038000
BG-4482040000
BG-4482050000
BG-4482063000
BG-4482075000
38
40
51
65
76
47
50
62
78
89
working
press. 20C
[bar]
6
6
6
6
4
bending
radius
[mm]
152
160
204
260
304
vacuum
[bar]
0,9
0,9
0,9
0,9
0,9
weight
[kg/m]
0,80
0,95
1,30
1,80
2,30
standard
length
[m]
30
30
30
30
30
VACUPRESS SUPERELASTIC
Internal layer:
Reinforcement:
External layer:
Working temp.:
White PVC
Steel helix wire, polyester cord
Black PVC
From -25C to +60C
Characteristics: Flexible suction-delivery hose designed to transfer dry foods, food substances such as water,
beer, wine, alcohols up to 28% concentration, juices, beverages. Not recommended for food
substances containing oil and fat as well as dairy products. In compliance with European
Directive 1935/2004 CE (stimulant A, B and C). Widely used in industrial applications as well
as for loading and unloading of tank trucks. Remains very flexible even at low temperatures.
Smooth internal layer improves cleaning maintenance and loading/unloading performance and
time by 20%. It is resistant to weather conditions and abrasion (according to DIN 53516 : mm3
<160). Available with antistatic wire on request. For wine and juice industry a special version VACUPRESS ENO with red external layer is available.
code
I.D.
[mm]
O.D.
[mm]
bending
radius
[mm]
ME-VACUPRSE-019
ME-VACUPRSE-025
ME-VACUPRSE-030
ME-VACUPRSE-032
ME-VACUPRSE-035
ME-VACUPRSE-038
ME-VACUPRSE-040
ME-VACUPRSE-045
ME-VACUPRSE-050
ME-VACUPRSE-060
ME-VACUPRSE-063
ME-VACUPRSE-076
ME-VACUPRSE-080
ME-VACUPRSE-090
ME-VACUPRSE-102
ME-VACUPRSE-120
ME-VACUPRSE-127
ME-VACUPRSE-152
19
25
30
32
35
38
40
45
50
60
63
76
80
90
102
120
127
152
28
35,6
40,6
42,6
47
51
53
58
63
74
77
92
96
107
119
138
145
171
70
80
90
100
115
125
130
140
150
180
190
210
220
250
300
350
370
480
working
bursting
press. 20C press. 20C
[bar]
[bar]
20
16
16
16
14
14
14
12
12
12
12
12
10
10
10
8
7
5
60
48
48
48
42
42
42
36
36
36
36
36
30
30
30
24
21
15
vacuum
[bar]
weight
[kg/m]
standard
length
[m]
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,47
0,68
0,77
0,80
1,05
1,20
1,22
1,34
1,60
2,00
2,10
2,90
2,95
3,50
4,00
5,30
5,80
6,85
60
60
60
60
60
30
30
30
30
30
30
30
30
30
30
20
20
20
11
FLORIDA
Material:
Transparent PVC
Reinforcement: Rigid PVC spiral
Characteristics: Lightweight, flexible suction-delivery hose designer to transfer water, Beer, wine, alcohols up to
28% concentration, juices, beverages and slightly aggressive chemicals Not recommended for
food substances containing oil and fat as well as dairy products. In compliance with European
Directive 1935/2004 CE (stimulant A, B and C).
code
I.D.
[mm]
ME-FLORIDA-20
ME-FLORIDA-25
ME-FLORIDA-30
ME-FLORIDA-32
ME-FLORIDA-35
ME-FLORIDA-38
ME-FLORIDA-40
ME-FLORIDA-45
ME-FLORIDA-50
ME-FLORIDA-55
ME-FLORIDA-60
ME-FLORIDA-63
ME-FLORIDA-70
ME-FLORIDA-75
ME-FLORIDA-80
20
25
30
32
35
38
40
45
50
55
60
63
70
75
80
wall
thickness
[mm]
2,4
2,4
2,5
2,6
2,7
2,8
3,0
3,5
4,0
4,3
4,3
4,1
4,5
4,7
4,7
working
press. 20C
[bar]
6,5
6,5
6
6
6
6
5,5
5,5
5,5
5,5
4
4
3
3
3
vacuum
[bar]
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
bending
radius
[mm]
110
140
175
180
195
210
220
255
275
310
330
350
450
500
550
weight
[kg/m]
0,21
0,25
0,33
0,35
0,40
0,43
0,48
0,64
0,76
0,86
0,90
0,97
1,13
1,20
1,45
standard
length
[m]
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
LUISIANA SUPERELASTIC
Material:
Transparent PVC
Reinforcement: Rigid PVC spiral
Characteristics: Lightweight, very flexible, suction-delivery hose designed to transfer water, slightly aggressive
chemicals, pest control products, etc.
12
code
I.D.
[mm]
ME-LUISIASE-020
ME-LUISIASE-025
ME-LUISIASE-030
ME-LUISIASE-032
ME-LUISIASE-035
ME-LUISIASE-038
ME-LUISIASE-040
ME-LUISIASE-045
ME-LUISIASE-050
ME-LUISIASE-060
ME-LUISIASE-063
ME-LUISIASE-076
ME-LUISIASE-102
ME-LUISIASE-127
ME-LUISIASE-152
20
25
30
32
35
38
40
45
50
60
63
76
102
127
152
wall
thickness
[mm]
3,1
3,3
3,5
3,6
3,4
3,7
3,8
3,7
4,1
4,5
4,0
5,2
6,2
6,3
7,2
working
press. 20C
[bar]
6,5
6,5
5,5
5,5
5
4,5
4,5
4
3,5
3,5
3,5
2,5
2,5
2
2
vacuum
[bar]
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,5
0,5
bending
radius
[mm]
65
100
125
135
145
155
160
180
200
245
260
315
430
670
750
weight
[kg/m]
0,28
0,33
0,42
0,46
0,50
0,55
0,61
0,67
0,81
0,97
1,04
1,38
2,20
3,13
4,25
standard
length
[m]
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
THERMOSOFT
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black PVC
Textile braid
Yellow PVC
From -20C to +100C
Characteristics: General purpose hose designed to transfer air, water and other fluids. Five layer construction
ensures high resistance to sudden temperature changes, cyclic pressure and deformation.
Chemical resistance to certain acids, bases, bleach and sea water combined with other properties of THERMOSOFT hose makes it a new alternative to several types of rubber hoses. To
be used with hydraulic fittings (TI-Z) crimped with ferrules or fittings assembled on the hose
with the use of safety clamps (that are to be tightened during first use in elevated temperature).
Safety factor 3:1.
code
I.D.
[mm]
O.D.
[mm]
TR-THERMOSOFT-13
TR-THERMOSOFT-16
TR-THERMOSOFT-19
TR-THERMOSOFT-25
13
16
19
25
22
25
28
34
working
press. 20C
[bar]
30
30
30
30
working
press. 100C
[bar]
15
15
15
15
bending
radius
[mm]
75
90
105
130
weight
[kg/m]
0,31
0,36
0,41
0,51
standard
length
[m]
25
25
25
25
THERMOCLEAN AL 20
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth PVC

Synthetic cord
Blue, smooth PVC
From -15C to +70C
Characteristics: Flexible hose used for washing applications (cold and hot water) and slightly aggressive
chemicals. External layer is resistant to animal and vegetable fats. Recommended for food
industry. In compliance with European Directive 1935/2004 CE and 2007/19/CE (stimulant A,
B and C). Fittings and ferrules should be assembled after the hose is heated for 30 seconds
in hot water (+60C). To be used with hydraulic fittings (TI-Z) crimped with ferrules or fittings
assembled on the hose with the use of safety clamps (that are to be tightened during first use
in elevated temperature).
code
I.D.
[mm]
O.D.
[mm]
TR-THERMOAL20-12
TR-THERMOAL20-16
TR-THERMOAL20-19
12
16
19
20
24
28
working
pressure
20C/70C
[bar]
33/20
33/20
33/20
bursting
pressure
20C/70C
[bar]
100/60
100/60
100/60
bending
radius
[mm]
weight
[kg/m]
standard
length
[m]
108
144
171
0,26
0,32
0,43
25
25
25
13

THERMOCLEAN 40
Internal layer:
Reinforcement:
External layer:
Working temp.:
Grey, smooth PVC

Double polyester cord
Blue, smooth PVC
From -10C to +70C
(with peaks up to + 80C)
B and C). To be used with crimped THERMOCLEAN fittings.
code
I.D.
[mm]
O.D.
[mm]
TR-THERMO40-12
12
22
working
pressure
20C/70C
[bar]
80/40
bursting
pressure
20C/70C
[bar]
240/120
bending
radius
[mm]
weight
[kg/m]
standard
length
[m]
84
0,33
50
THERMOCLEAN 100
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth PVC

Polyester cord
Blue, smooth PVC
From -15C to +100C
B and C). To be used with crimped THERMOCLEAN fittings.
code
I.D.
[mm]
O.D.
[mm]
TR-THERMO100-013
TR-THERMO100-016
TR-THERMO100-019
TR-THERMO100-025
13
16
19
25
22
25
28
34
working
bursting
pressure
pressure
20C/100C 20C/100C
[bar]
[bar]
30/15
90/45
30/15
90/45
30/15
90/45
26/13
78/39
bending
radius
[mm]
weight
[kg/m]
standard
length
[m]
80
95
115
150
0,31
0,36
0,41
0,52
40
40
40
40
Fittings for THERMOCLEAN hoses

For THERMOCLEAN hoses we can use hydraulic fittings
(TI-Z) along with industrial ferrules (TI-L) or special
fittings (hygienic finish) with integrated ferule made of
AISI 304. Fittings with different threads, material or for
different diameters are also available.
code
BSP thread size

[inch]
hose I.D.
[mm]
TR-THERMO-12-BZ140-08SS
1/2
12 13
14
NIPLAFLEX
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth NBR/PVC compound

Synthetic cord
Black, smooth NBR/PVC compound
From -20C to +70C
Characteristics: General purpose, highly flexible hose used for water, air, oil, petrol, grease, many chemicals,
pesticides, etc. Non-staining external layer resistant to ageing and ozone.
code
I.D.
[mm]
BG-3240006000
BG-3240008000
BG-3240009000
BG-3240010000
BG-3240013000
BG-3240019000
6
8
9
10
13
19
wall
thickness
[mm]
3
3,5
3,5
3,5
4
4,5
working
pressure
[bar]
25
25
25
25
25
25
O.D.
[mm]
12
15
16
17
21
28
bursting
pressure
[bar]
75
75
75
75
75
75
weight
[kg/m]
0,11
0,17
0,19
0,20
0,28
0,44
standard
length
[m]
100
100
100
100
100
50
WINGFOOT 300
Internal layer: Black NBR rubber
Reinforcement: Synthetic cord
External layer: Blue rubber compound
Chemivic (NBR + vinyl)
Characteristics: Top grade (flexible, non-staining, kink and torsion resistant), general purpose hose used for a
wide range of industrial applications such as: air, hot and cold water, oil, hydraulic fluids, slightly
aggressive chemicals, diluted acids, cleaning fluids. External layer resistant to oil, ageing and
ozone. Low elongation and high dimensional stability make the hose specially suited for hose
reels. Nonconductive (R > 1 M/m at 1000 V DC).
code
I.D.
[mm]
O.D.
[mm]
GY-WINGB300-10
GY-WINGB300-13
GY-WINGB300-16
GY-WINGB300-19
GY-WINGB300-25
9,5
12,7
15,9
19,1
25,4
17,5
21,8
25,9
30,2
38,
bending
radius
[mm]
95
130
160
190
255
working
pressure
[bar]
20
20
20
20
20
bursting
pressure
[bar]
80
80
80
80
80
weight
[kg/m]
0,28
0,39
0,49
0,63
0,92
standard
length
[m]
152,5
152,5
152,5
152,5
137,3
15
GORILLA
Reinforcement: Aramid fibre braid
(synthetic braid for 2)
External layer: Special yellow Carbryn
(C-NBR) rubber
Characteristics: Top grade, highly flexible (with kink and torsion resistance) general purpose hose. Internal layer
suitable for oil, fat, bases, air, kerosene, cold and hot water. External layer has excellent abrasion
resistance and good resistance to animal fat and oil. External layer flame resistance meets MSHA
2G-14C/14 standards. High tensile strength and dimensional stability make the hose particularly
suitable for hose reels. Nonconductive (R > 1 M/m at 1000 V DC). Safety factor 4:1.
code
I.D.
[mm]
O.D.
[mm]
GY-GORILLA-06
GY-GORILLA-08
GY-GORILLA-10
GY-GORILLA-13
GY-GORILLA-16
GY-GORILLA-19
GY-GORILLA-25
GY-GORILLA-32
GY-GORILLA-38
GY-GORILLA-51
6,4
7,9
9,5
12,7
15,9
19,1
25,4
31,8
38,1
50,8
15,5
17,5
18,6
22,6
26,9
30,2
37,8
45,6
51,8
66,6
bending
radius
[mm]
65
80
95
130
160
190
255
320
380
510
working
pressure
[bar]
35
35
35
35
35
35
35
35
35
35
weight
[kg/m]
0,25
0,30
0,33
0,42
0,52
0,61
0,86
1,18
1,27
1,76
standard
length
[m]
152,5
152,5
152,5
152,5
152,5
152,5
137,3
122
91,5
152,5
PLICORD ARCTIC ORTACTM

Internal layer:
Reinforcement:
External layer:
Working temp.:
ECO black rubber

Two synthetic cords
Blue neoprene rubber
From -55C to +80C
Characteristics: General purpose delivery hose designer to transfer air, petrochemical products, chemical
products at low temperatures.
16
code
I.D.
[mm]
O.D.
[mm]
GY-PLICORDAO-25
GY-PLICORDAO-32
GY-PLICORDAO-35
GY-PLICORDAO-38
GY-PLICORDAO-51
25,4
31,8
34,9
38,1
50,8
39,1
45,3
50,6
53,6
67,4
working
pressure
[bar]
20
20
20
20
20
bursting
pressure
[bar]
80
80
80
80
80
weight
[kg/m]
0,87
1,04
1,30
1,41
1,86
standard
length
[m]
30,5
30,5
30,5
30,5
30,5

INSTA-GRIPTM 300
Black synthetic ChemivicTM rubber
(NBR + vinyl)
Reinforcement: Sythetic cord
External layer: Black synthetic rubber
Internal layer:
Characteristics: General purpose delivery hose designed for pneumatic and hydraulic applications. Widely used in
automotive industry (no silicone used during hose production External layer has excellent abrasion,
weather condition and oil resistance. External layer flame resistance meets MSHA 2G-14C/14
standards. Nonconductive (R > 1 M/m at 1000 V DC). Safety factor 4:1. Hose designed for use
For use with push-on fittings.
code
I.D.
[mm]
O.D.
[mm]
GY-INSTAGRIP300-06
GY-INSTAGRIP300-08
GY-INSTAGRIP300-10
GY-INSTAGRIP300-13
GY-INSTAGRIP300-16
GY-INSTAGRIP300-19
6,4
7,9
9,5
12,7
15,9
19,1
13,7
15,7
17,5
20,6
23,6
27,2
bending
radius
[mm]
65
75
75
130
150
180
working
pressure
[bar]
20
20
20
20
20
20
weight
[kg/m]
0,13
0,18
0,21
0,25
0,30
0,39
standard
length
[m]
152,5
152,5
152,5
152,5
152,5
152,5
TUBANO OIL
Material:
Nitrile and polychloroprene rubber
Characteristics: Hose used for cooling and heating installations, water, some acids and diluted alkalis. Resistant
to high temperatures and ozone but with limited chemical resistance. Supplied in 1 m pieces
to enable easy cutting and fitting into an installation.
code
I.D.
[mm]
extensibility
[mm]
EC-102111
EC-102112
EC-102113
EC-102114
EC-102115
EC-102116
EC-102117
EC-102118
EC-102119
20
25
31,5
33,5
37
44
48
55
65
20,0 25,0
25,0 31,0
31,5 36,0
33,5 38,0
37,0 44,0
44,0 48,0
48,0 55,0
55,0 65,0
65,0 75,0
bending
radius
[mm]
70
85
105
110
115
120
125
130
140
working
pressure
[bar]
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
standard
length
[m]
1
1
1
1
1
1
1
1
1
17
INDUSTRIAL HOSES - air and water

Characteristics
Hoses for air and water designed for industrial water, sewage, cooling water, washdown, compressed air
(compressors, pneumatic tools, hose reels) and some for food products. Made of rubber, PVC, polyethylene with
textile braid, PVC or steel wire helix. Apart from general purpose hoses in this group we distinguish hoses for:
-
-
-
-
-
-
-
-
cooling installations in steel mills,

fire equipment,
portable toilets,
car and rail brake systems,
cooling systems in cars,
motor and pleasure boats,
snow cannons,
hot air in tank trucks.
Fittings for air and water hoses (see chapter COUPLINGS, VALVES, CLAMPS) can be mounted with worm drive
clamps, safety clamps or crimped.
For air and water hoses see also: food hoses , steel hoses, PTFE hoses, TYGON, or chapters: HIGH PRESSURE
and PNEUMATICS.
TRICOFLEX
Internal layer:
Reinforcement:
External layer:
Working temp.:
Two layers of black PVC

Strong textile braid
Yellow PVC
From -15C to +60C
Characteristics: General purpose flexible delivery hose. Double external layer and a strong textile knitted braid
ensure better tensile strength.External layer resistant to abrasion and UV radiation. Due to its
construction recommended for irrigation systems in agriculture, gardening and construction
industry.
18
code
I.D.
[mm]
O.D.
[mm]
TR-TRICOFLEX-13
TR-TRICOFLEX-15
TR-TRICOFLEX-19
TR-TRICOFLEX-25
TR-TRICOFLEX-30
TR-TRICOFLEX-35
TR-TRICOFLEX-40
TR-TRICOFLEX-50
12,5
15
19
25
30
35
40
50
18
20,5
25,5
32,5
39
45
51
63
working
pressure
[bar]
10
10
9,2
8
8
8
8
8
bursting
pressure
[bar]
25
25
23
20
20
20
20
20
bending
radius
[mm]
125
135
180
240
300
350
400
500
weight
[kg/m]
0,14
0,18
0,26
0,44
0,64
0,82
1,03
1,51
standard
length
[m]
50
50
50
50
50
50
50
50
VACUPRESS FLEX
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black plasticized PVC

Steel wire helix, polyester yarn
Black plasticized PVC
From -25C to +60C
Characteristics: Highly flexible, lightweight, suction-delivery hose designed to transfer dry materials, water,
sewage, mud. Widely used in irrigation systems, loading and unloading of tank trucks, industrial
plant engineering, etc. Remains very flexible even at low temperatures. Smooth internal and
external layer facilitate maintaining highest hygiene standards and increase reloading rate
by 20%. Resistant to weather conditions and abrasion (according to DIN 53516: 150 mm3).
Available in straight (not bent) lengths from 3 to 6 meters.
code
O.D.
[mm]
O.D.
[mm]
ME-VACUPRFX-050
ME-VACUPRFX-060
ME-VACUPRFX-076
ME-VACUPRFX-080
ME-VACUPRFX-090
ME-VACUPRFX-102
ME-VACUPRFX-120
ME-VACUPRFX-127
ME-VACUPRFX-152
50
60
76
80
90
102
120
127
152
63
74
92
96
107
119
138
145
171
bending
radius
[mm]
150
180
210
220
250
300
350
370
480
working
bursting
[bar]
[bar]
12
36
12
36
12
36
10
30
10
30
10
30
8
24
7
21
5
15
vacuum
[bar]
weight
[kg/m]
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
1,60
2,00
2,90
2,95
3,50
4,00
5,30
5,80
6,85
standard
length
[m]
30
30
30
30
30
30
20
20
20
ZINCOFLEX - C
Internal layer: Non-toxic EPDM rubber
Reinforcement: Galvanised steel braid
Characteristics: Hose designed for water and non-corrosive fluids. Widely used in sanitary systems, boilers
and cooling systems. Two red stripes in the braid of the hose indicate the resistance to high
fluid temperature.
code
I.D.
[mm]
O.D.
[mm]
RK-ZCF/C-06
RK-ZCF/C-10
RK-ZCF/C-13
RK-ZCF/C-19
RK-ZCF/C-25
RK-ZCF/C-32
RK-ZCF/C-40
RK-ZCF/C-50
6
10
13
19
25
32
40
50
9
13,2
18
25
32
41
51
62
working
pressure
[bar]
15
15
15
10
10
10
6
6
bursting
pressure
[bar]
60
60
60
40
40
40
24
24
bending
radius
[mm]
20
40
60
80
100
160
180
230
standard
length
[m]
50
50
50
50
50
50
50
50
19
WS - ST
WS - GI
Black, smooth EPDM rubber
(with increased parameters)
Reinforcement: External AISI 304 braid
Working temp.: To +110C
Internal layer:
Characteristics: Flexible hose assembly designed to sanitary systems (hot and cold water). Widely used in
industrial installations, central heating and air-conditioning. Resistant to glycol (concentration
to 35%). Available with brass fitting and stainless steel (AISI 304) ferrules. Hose assemblies
with different thread types and lengths available on request.
code
VO-ST-06DP-06DP/020
VO-ST-06DP-06DP/040
VO-ST-06DP-06DP/060
VO-ST-06DP-06DP/080
VO-ST-06DP-06DP/100
VO-ST-08DP-08DP/020
VO-ST-08DP-08DP/040
VO-ST-08DP-08DP/060
VO-ST-08DP-08DP/080
VO-ST-08DP-08DP/100
VO-GI-08DP-08DP/030
VO-GI-08DP-08DP/040
VO-GI-08DP-08DP/050
VO-GI-08DP-08MP/030
VO-GI-08DP-08MP/040
VO-GI-08DP-08MP/050
VO-GI-12DP-12DP/030
VO-GI-12DP-12DP/040
VO-GI-12DP-12DP/050
VO-GI-12DP-12MP/030
VO-GI-12DP-12MP/040
VO-GI-12DP-12MP/050
* - at 3 bar working pressure
20
I.D.
[mm]
O.D.
[mm]
working
pressure
[bar]
thread
1
[inch]
3/8
female
thread
2
[inch]
flow max. *
[l/min.]
3/8
female
13
29
16
1/2
female
1/2
female
1/2
male
12
20
65
3/4
female
3/4
female
3/4
male
length
[mm]
200
400
600
800
1000
200
400
600
800
1000
300
400
500
300
400
500
300
400
500
300
400
500
TUBES 2116
Internal layer:
Reinforcement:
External layer:
Working temp.:

Polyester cord
Red, smooth EPDM rubber
From -40C to +100C
Characteristics: General purpose industrial hose designed to air and water transfer. Widely used in hot water
washdown applications to clean floors and equipment. Suitable for outdoor usage. Resistant
to wether conditions and abrasion.
code
I.D.
[mm]
O.D.
[mm]
PR-TU2116-13
PR-TU2116-16
PR-TU2116-19
PR-TU2116-25
13
16
19
25
21
26
28,5
35
working
pressure
[bar]
10
10
10
10
bursting
pressure
[bar]
40
40
40
40
bending
radius
[mm]
40
60
90
120
weight
[kg/m]
0,27
0,41
0,45
0,60
standard
length
[m]
60
60
60
40
TUBES 2116 T
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth EPDM rubber

Polyester cord
Red or blue, smooth EPDM rubber
From -40C to +100C
Characteristics: General purpose industrial hose designed to air and water transfer. Widely used in hot water
washdown applications to clean floors and equipment. Suitable for outdoor usage. Resistant
to weather conditions and abrasion.
code
I.D.
[mm]
PR-TU2116T-13R
PR-TU2116T-16R
PR-TU2116T-19R
PR-TU2116T-25R
13
16
19
25
PR-TU2116T-13BL
PR-TU2116T-16BL
PR-TU2116T-19BL
PR-TU2116T-25BL
13
16
19
25
working
bursting
pressure
pressure
[bar]
[bar]
TUBES 2116 T (red external layer)
23
10
40
28
10
40
32
10
40
39
10
40
TUBES 2116 T (blue external layer)
23
10
40
28
10
40
32
10
40
39
10
40
O.D.
[mm]
bending
radius
[mm]
weight
[kg/m]
standard
length
[m]
152
191
228
305
0,44
0,63
0,79
1,041
100
100
100
100
152
191
228
305
0,44
0,63
0,79
1,041
100
100
100
100
21

SPECTRATM 300
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth NBR rubber

Synthetic cord
White ChemivicTM synthetic rubber
From -30C to +93C
Characteristics: Delivery hose designed to hot water washdown applications to clean floors and equipment
in food processing plants, dairies, packing houses, bottling plants, breweries, canneries, etc.
Safety factor 4:1.
code
I.D.
[mm]
O.D.
[mm]
GY-SPECTRA300-13
GY-SPECTRA300-19
GY-SPECTRA300-25
12,7
19,1
25,4
23,1
30
38,1
bending
radius
[mm]
125
190
250
working
pressure
[bar]
20
20
18
weight
[kg/m]
0,40
0,60
0,89
standard
length
[m]
152,5
152,5
137,3
FORTRESS 300
Internal layer: Black NBR rubber compound
External layer: Blue Carbryn rubber protected
by Microban cover
Characteristics: High-quality, flexible, non-staining, kink and torsion resistant hose. Widely used for washdown
applications in food processing plants, dairies, packing houses, bottling plants, breweries,
canneries due to Microban antimicrobial external protection layer that inhibits the growth of
bacteria, mold, and fungi. In compliance with ISO 1307.
22
code
I.D.
[mm]
O.D.
[mm]
GY-FORT300-13
GY-FORT300-16
GY-FORT300-19
12,9
15,9
19,1
22,8
27
30,2
working
pressure
[bar]
20
20
20
bursting
pressure
[bar]
80
80
80
weight
[kg/m]
0,43
0,54
0,61
standard
length
[m]
152,5
152,5
152,5

FORTRESS 1000
by Microban cover
applications in food, pharmaceutical and cosmetic industry due to Microban antimicrobial
external protection layer that inhibits the growth of bacteria, mold, and fungi. In compliance with
ISO 1307. Use with hydraulic fittings (TI-Z) crimped with appropriate ferules.
code
I.D.
[mm]
O.D.
[mm]
GY-FORT1000-10
GY-FORT1000-13
GY-FORT1000-19
9,5
12,7
19,1
19,1
21,8
30,5
working
pressure
[bar]
69
69
69
bursting
pressure
[bar]
276
276
276
weight
[kg/m]
0,27
0,30
0,63
standard
length
[m]
152,5
152,5
152,5
FORTRESS 3000
by Microban cover
applications in food, pharmaceutical and cosmetic industry due to Microban antimicrobial
external protection layer that inhibits the growth of bacteria, mold, and fungi. In compliance with
ISO 1307. Use with hydraulic fittings (TI-Z) crimped with appropriate ferules.
code
I.D.
[mm]
O.D.
[mm]
GY-FORT3000-06
GY-FORT3000-10
GY-FORT3000-13
6,4
9,5
12,7
13,5
17,5
20,8
working
pressure
[bar]
207
207
207
bursting
pressure
[bar]
828
828
828
weight
[kg/m]
0,22
0,36
0,48
standard
length
[m]
152,5
152,5
152,5
23

MICHIGAN
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth SBR rubber

Synthetic cord
White EPDM rubber
From -40C to +80C
Characteristics: Industrial hose designed to washdown application to clean floors and equipment in e.g. meat,
food and dairy industries. Suitable for outdoor usage. Resistant to weather conditions and
abrasion.
code
I.D.
[mm]
O.D.
[mm]
IV-MICHIGAN-013
IV-MICHIGAN-016
IV-MICHIGAN-019
IV-MICHIGAN-025
IV-MICHIGAN-032
IV-MICHIGAN-038
13
16
19
25
32
38
20
24
26
34
46
54
working
pressure
[bar]
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
weight
[kg/m]
0,24
0,31
0,29
0,54
1,10
1,44
standard
length
[m]
120
120
120
120
120
120
CONDITIONER
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth butyl rubber

Synthetic cord
White butyl rubber
From -30C to +110C
Characteristics: Softwall hose designed for hot water, low temperature steam, condensation water. Widely used
in humidifiers as well as in air conditioning installations.
code
I.D.
[mm]
O.D.
[mm]
IV-CONDITIONER-22
IV-CONDITIONER-30
22
30
32
40
24
working
pressure
[bar]
1
1
bursting
pressure
[bar]
40
40
weight
[kg/m]
0,49
0,64
standard
length
[m]
120
120

OSLO 10
(110 x 118 - SBR rubber)
External layer: Black, smooth EPDM rubber
Working temp.: From -25C to +70C (EPDM)
From -30C to +80C (SBR)
Internal layer:
Characteristics: Delivery hose designed for the most severe working conditions. Widely used for water transfer,
irrigation and draining systems, sewer cleaning, etc. Resistant to abrasion and weather
conditions.
code
I.D.
[mm]
O.D.
[mm]
IV-OSLO/10-032
IV-OSLO/10-038
IV-OSLO/10-051
IV-OSLO/10-063
IV-OSLO/10-076
IV-OSLO/10-090
IV-OSLO/10-102
IV-OSLO/10-110
IV-OSLO/10-127
IV-OSLO/10-152
IV-OSLO/10-203
IV-OSLO/10-254
32
38
51
63,5
76
90
102
110
127
152
203
254
38
45
58
70
83
98
110
118
135
160
215,5
270
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
30
30
30
30
30
30
weight
[kg/m]
0,55
0,64
0,72
0,78
1,00
1,24
1,53
1,72
1,93
2,30
4,54
7,82
standard
length
[m]
120
120
120
120
120
120
120
120
120
120
120
120
TORONTO LIGHT
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth synthetic rubber

Synthetic cord and steel helix wire
Black, synthetic rubber
From -30C to +70C
Characteristics: Suction and delivery hose designed to transfer industrial water, sewage, mud, drainage, etc.
Resistance to kinking and a strong construction makes it suitable for heavy-duty applications.
Vacuum 0,9 bar.
code
I.D.
[mm]
O.D.
[mm]
IV-TORONTO/L-019
IV-TORONTO/L-025
IV-TORONTO/L-032
IV-TORONTO/L-038
IV-TORONTO/L-040
IV-TORONTO/L-051
IV-TORONTO/L-063
IV-TORONTO/L-076
IV-TORONTO/L-102
IV-TORONTO/L-110
IV-TORONTO/L-127
IV-TORONTO/L-152
IV-TORONTO/L-203
IV-TORONTO/L-254
19
25
32
38
40
51
63,5
76
102
110
127
152
203
254
27
33
40
47,5
49,5
60,5
75
87
114
125
143
170,5
225
278
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
10
10
10
10
5
bursting
pressure
[bar]
30
30
30
30
30
30
30
30
30
30
30
30
30
15
bending
radius
[mm]
100
125
160
190
200
255
380
455
610
660
700
1000
1200
1530
weight
[kg/m]
0,44
0,53
0,71
0,92
0,96
1,24
1,94
2,13
3,18
3,97
7,17
10,30
12,17
22,95
standard
length
[m]
120
120
120
120
120
120
120
120
120
120
120
120
60
12
25

FIRE CHICAGO
Internal layer:
Reinforcement:
External layer:
Working temp.:

Synthetic cord
From -40C to +100C
Characteristics: Robust, flexible hose designed for water delivery and suitable for hose reels. Widely used for
high pressure fire extinguishing equipment. External layer is resistant to fire retardant chemicals,
foams, abrasion and weather conditions.
code
I.D.
[mm]
O.D.
[mm]
IV-CHICAGO-19
IV-CHICAGO-25
IV-CHICAGO-28
IV-CHICAGO-32
IV-CHICAGO-38
19
25
28
32
38
32
38
44
45
52
working
pressure
[bar]
40
40
40
40
40
bursting
pressure
[bar]
120
120
120
120
120
weight
[kg/m]
0,57
0,70
0,97
0,85
1,21
standard
length
[m]
120
120
120
120
120
ANKARA
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth NR/SBR rubber

Synthetic cord
Black, smooth SBR rubber
From -40C to +70C
Characteristics: Robust, flexible hose adjusted to be used on hose reels. It is used for high pressure fire
extinguishing equipment. Electrically conductive internal layer is resistant to fire extinguishing
powders and foams. External layer resistant to abrasion and weather conditions.
26
code
I.D.
[mm]
O.D.
[mm]
IV-ANKARA-25
IV-ANKARA-32
25
32
37
46
working
pressure
[bar]
20
20
bursting
pressure
[bar]
60
60
weight
[kg/m]
0,67
0,90
standard
length
[m]
120
120
ESSEN
Internal layer: Black, smooth EPDM rubber
External layer: White EPDM rubber covered
with vulcanized glass fibre ply
(external layer to +375C)
Characteristics: Delivery hose designed for water. External layer resistant to high temperatures. Widely used
in cooling systems. Recommended especially for water installation in metallurgical furnaces.
code
I.D.
[mm]
O.D.
[mm]
IV-ESSEN-013
IV-ESSEN-019
IV-ESSEN-025
IV-ESSEN-032
IV-ESSEN-038
IV-ESSEN-045
IV-ESSEN-051
IV-ESSEN-063
IV-ESSEN-076
IV-ESSEN-090
IV-ESSEN-102
13
19
25
32
38
45
51
63,5
76
90
102
23
31,5
37
44
53
62
67,5
80
96
110
124
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
30
30
30
30
30
weight
[kg/m]
0,33
0,59
0,69
0,85
1,32
1,79
1,89
2,29
3,30
3,85
4,82
standard
length
[m]
120
120
120
120
120
120
120
120
120
120
120
ESSEN / LL
Reinforcement: Synthetic cord, steel helix wire
Characteristics: Suction-delivery hose designed for water. External layer resistant to high temperatures. Widely
used in cooling systems. Recommended especially for water installation in metallurgical furnaces.
Vacuum 0,9 bar.
code
I.D.
[mm]
O.D.
[mm]
IV-ESSEN/LL-012
IV-ESSEN/LL-019
IV-ESSEN/LL-025
IV-ESSEN/LL-032
IV-ESSEN/LL-038
IV-ESSEN/LL-051
IV-ESSEN/LL-063
IV-ESSEN/LL-076
IV-ESSEN/LL-102
12
19
25
32
38
51
65
76
102
23
31
37
44
51
64
79
92
120
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
30
30
30
bending
radius
[mm]
85
95
115
150
180
245
315
375
530
weight
[kg/m]
0,46
0,76
0,92
1,09
1,49
1,97
2,76
3,60
5,39
standard
length
[m]
120
120
120
120
120
120
120
120
120
27
ESSEN 20
Internal layer: White, smooth EPDM rubber
Characteristics: Delivery hose designed for water. External layer resistant to high temperatures. Widely used
in cooling systems. Recommended especially for water installation in metallurgical furnaces.
code
I.D.
[mm]
O.D.
[mm]
IV-ESSEN20-013
IV-ESSEN20-016
IV-ESSEN20-019
IV-ESSEN20-025
IV-ESSEN20-032
IV-ESSEN20-038
IV-ESSEN20-051
IV-ESSEN20-060
IV-ESSEN20-063
IV-ESSEN20-076
IV-ESSEN20-090
IV-ESSEN20-102
13
16
19
25
32
38
51
60
63,5
76
90
102
24
27
31
39
47
55
68
81
83
94
110
126
working
pressure
[bar]
20
20
20
20
20
20
20
20
20
20
20
20
bursting
pressure
[bar]
60
60
60
60
60
60
60
60
60
60
60
60
weight
[kg/m]
0,35
0,41
0,54
0,85
1,10
1,43
1,85
2,75
2,69
2,76
3,65
4,91
standard
length
[m]
120
120
120
120
120
120
120
120
120
120
120
120
GEYSER / 20 - BB / FV
White, smooth, dielectric
EPDM rubber
Internal layer:
Characteristics: Delivery hose designed for cooling water transfer especially in metallurgical furnaces, electrical
transformers and electrical transducers. Resistance to heat radiation (to +400C) and splashes
of hot metals. Internallayer resistant to electrical brakedown (E> = 5000 V/mm).
code
I.D.
[mm]
O.D.
[mm]
MT-GEYSER/20-BB/FV-013
13
19
25
32
38
50
60
75
80
100
24
32
39
48
55
68
80
95
100
124
Min bending radius given for 1 bar working pressure.
28
working
pressure
[bar]
20
20
20
20
20
20
20
20
20
20
bursting
pressure
[bar]
60
60
60
60
60
60
60
60
60
60
min. bending
radius
[mm]
65
95
125
160
190
250
300
380
400
500
weight
[kg/m]
0,44
0,62
0,78
1,05
1,28
1,78
2,50
2,90
3,15
4,90
standard
length
[m]
40
40
40
40
40
40
40
40
40
40
DERBY RADIATOR
Internal layer:
Reinforcement:
External layer:
Working temp.:

Synthetic cord
Black EPDM rubber
From -40C to +120C
Characteristics: Hose designed for heating and cooling systems, automotive pumps and industrial machines.
Resistant to cooling fluids and manufactured according to DIN 73411 (1979) standards.
code
I.D.
[mm]
O.D.
[mm]
IV-RADIATOR-008
IV-RADIATOR-010
IV-RADIATOR-012
IV-RADIATOR-013
IV-RADIATOR-015
IV-RADIATOR-016
IV-RADIATOR-018
IV-RADIATOR-019
IV-RADIATOR-020
IV-RADIATOR-022
IV-RADIATOR-025
IV-RADIATOR-028
IV-RADIATOR-030
IV-RADIATOR-032
IV-RADIATOR-035
IV-RADIATOR-038
IV-RADIATOR-040
IV-RADIATOR-042
IV-RADIATOR-045
IV-RADIATOR-048
IV-RADIATOR-050
IV-RADIATOR-055
IV-RADIATOR-060
IV-RADIATOR-065
IV-RADIATOR-070
IV-RADIATOR-075
IV-RADIATOR-080
IV-RADIATOR-100
IV-RADIATOR-110
IV-RADIATOR-114
8
10
12
13
15
16
18
19
20
22
25
28
30
32
35
38
40
42
45
48
50
55
60
65
70
75
80
100
110
114
15
18
19
20
22
23
25
28
27
29
32
36
38
40
43
48
50
52
55
58
60
65
70
75
80
85
91,5
112,5
122
126
working
pressure
[bar]
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
3
3
3
3
3
3
3
2
2
2
bursting
pressure
[bar]
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
9
9
9
9
9
9
9
9
9
9
6
6
6
weight
[kg/m]
0,14
0,19
0,19
0,21
0,23
0,22
0,27
0,37
0,29
0,32
0,36
0,43
0,46
0,49
0,53
0,77
0,80
0,84
0,89
0,94
0,98
1,07
1,16
1,25
1,33
1,43
1,71
2,34
2,41
2,50
standard
length
[m]
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
29
RADIATOR / LCL
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth CR rubber

Synthetic cord, steel helix wire
Black CR rubber
From 40C to +100C
Characteristics: Suction-delivery square corrugated hose designed to hot water and anti-freeze liquids in cooling
automotive systems and industrial vehicle engines. Internal layer resistant to anti-freeze liquids
and external layer resistant to oil, heat and ageing. Available in lengths (1 - 2 meter) with soft
ends on request.
code
I.D.
[mm]
O.D.
[mm]
IV-RADIATOR/LCL-16
IV-RADIATOR/LCL-18
IV-RADIATOR/LCL-20
IV-RADIATOR/LCL-22
IV-RADIATOR/LCL-25
IV-RADIATOR/LCL-28
IV-RADIATOR/LCL-30
IV-RADIATOR/LCL-32
IV-RADIATOR/LCL-35
IV-RADIATOR/LCL-38
IV-RADIATOR/LCL-40
IV-RADIATOR/LCL-42
IV-RADIATOR/LCL-45
IV-RADIATOR/LCL-50
IV-RADIATOR/LCL-51
IV-RADIATOR/LCL-55
IV-RADIATOR/LCL-60
IV-RADIATOR/LCL-70
IV-RADIATOR/LCL-76
IV-RADIATOR/LCL-90
16
18
20
22
25
28
30
32
35
38
40
42
45
50
51
55
60
70
76
90
26
26
28
32
35
36
38
42
45
48
50
52
55
60
61
65
72
82
89
102
working
pressure
[bar]
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
3
3
3
bursting
pressure
[bar]
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
9
9
9
bending
radius
[mm]
60
65
70
80
85
95
100
105
115
130
135
140
150
165
165
180
200
230
250
300
weight
[kg/m]
0,42
0,46
0,50
0,51
0,57
0,59
0,63
0,70
0,76
0,82
0,85
0,89
0,95
1,04
1,06
1,13
1,30
1,50
2,10
2,45
standard
length
[m]
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
MINE SPRAY
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black NBR rubber

Steel braid
Yellow ChemivicTM rubber
From -20C to +90C
Characteristics: Delivery hose designed for underground water spray service in dust control applications.
Widely used on continuous mining machinery at the head-face and on other mechanical mining
machines. External layer in compliance with MSHA standards. Safety factor 4:1.
30
code
I.D.
[mm]
O.D.
[mm]
GY-MINESPRAY-25
GY-MINESPRAY-32
GY-MINESPRAY-38
GY-MINESPRAY-51
25,4
31,8
38,1
50,8
36,8
44,5
50,3
64,8
bending
radius
[mm]
200
250
300
400
working
pressure
[bar]
70
70
70
70
weight
[kg/m]
0,94
1,28
1,61
2,34
standard
length
[m]
30,5
30,5
30,5
30,5

AUTO SILCAR RED
Internal layer:
Reinforcement:
External layer:
Working temp.:
Red, smooth silicone

Synthetic cord
From -50C to +180C
Characteristics: Delivery hose designed to transfer hot air or hot water mixed with anti-freeze liquids. Widely
used in cooling systems of vehicles where resistance to high temperature and oil is required.
code
I.D.
[mm]
O.D.
[mm]
IV-SILCAR-015
IV-SILCAR-022
IV-SILCAR-025
IV-SILCAR-028
IV-SILCAR-032
IV-SILCAR-038
IV-SILCAR-051
IV-SILCAR-055
IV-SILCAR-105
IV-SILCAR-110
IV-SILCAR-305
IV-SILCAR-320
15
22
25
28
32
38
51
55
105
110
305
320
22
29
32
35
39
45
58
64
114
121
319
337
working
pressure
[bar]
3
3
3
3
3
3
3
3
3
3
3
3
bursting
pressure
[bar]
9
9
9
9
9
9
9
9
9
9
9
9
standard
length
[m]
40
40
40
40
40
40
40
40
10
10
10
10
AUTO SILCAR RED / LL

Internal layer:
Reinforcement:
External layer:
Working temp.:

From -50C to +180C
Characteristics: Suction-delivery hose designed to transfer hot air or hot water mixed with anti-freeze liquids.
Widely used in cooling systems of vehicles where resistance to high temperature and oil is
required.
code
I.D.
[mm]
O.D.
[mm]
IV-SILCAR/LL-013
IV-SILCAR/LL-025
IV-SILCAR/LL-038
IV-SILCAR/LL-051
13
25
38
51
23,5
35,5
48,5
61,5
working
pressure
[bar]
3
3
3
3
bursting
pressure
[bar]
9
9
9
9
vacuum
[bar]
-0,9
-0,9
-0,9
-0,9
bending
radius
[mm]
80
150
230
300
standard
length
[m]
40
40
40
40
31
AUTO SILCAR RED / LO

Internal layer:
Reinforcement:
External layer:
Working temp.:

Red, corrugated silicone
From -50C to +180C
Characteristics: Suction-delivery hose designed to transfer hot air or hot water mixed with anti-freeze liquids.
Widely used in cooling systems of vehicles where resistance to high temperature and oil is
required.
code
I.D.
[mm]
IV-SILCAR/LO-030
IV-SILCAR/LO-040
IV-SILCAR/LO-051
IV-SILCAR/LO-063
IV-SILCAR/LO-076
IV-SILCAR/LO-100
IV-SILCAR/LO-110
IV-SILCAR/LO-305
30
40
51
63,5
76
100
110
305
working
pressure
[bar]
3
3
3
3
3
3
3
3
bursting
pressure
[bar]
9
9
9
9
9
9
9
9
standard
length
[m]
40
40
40
10
10
10
10
10
BOAT ETNA
Internal layer:
Reinforcement:
External layer:
Working temp.:

Black, corrugated synthetic rubber
From -30C to +100C
Characteristics: Lightweight and very flexible suction-delivery hose designed to convey wet exhaust fumes
in pleasure boats (exhaust of fumes and cooling water). External layer resistant to fire and
weather conditions.
Standards:
Lloyds 99/00169 (E2).
32
code
I.D.
[mm]
IV-ETNA-032
IV-ETNA-038
IV-ETNA-040
IV-ETNA-045
IV-ETNA-051
IV-ETNA-058
IV-ETNA-063
IV-ETNA-076
IV-ETNA-090
IV-ETNA-102
IV-ETNA-127
IV-ETNA-152
IV-ETNA-203
32
38
40
45
51
58
63,5
76
90
102
127
152
203
bursting
pressure
[bar]
5
5
5
5
5
5
5
5
5
5
5
5
5
bending
radius
[mm]
130
150
160
170
180
190
200
250
330
410
560
680
995
weight
[kg/m]
0,65
0,75
0,78
0,87
1,07
1,20
1,30
1,46
1,73
2,06
2,58
3,18
5,52
standard
length
[m]
60
60
60
60
60
60
60
60
60
60
60
60
60

VESUVIO / LL
Internal layer:
Reinforcement:
External layer:
Working temp.:

From -30C to +100C
Characteristics: Lightweight and very flexible suction-delivery hose designed to convey wet exhaust fumes in
pleasure boats (exhaust of fumes and cooling water). External layer resistant to fire, abrasion
and weather conditions.
Standards:
ISO 13363 type 2A, SAE J 2006:03 type R2, R.I.N.A., Lloyds Register, DNV.
code
I.D.
[mm]
O.D.
[mm]
IV-VESUVIO/LL-020
IV-VESUVIO/LL-025
IV-VESUVIO/LL-030
IV-VESUVIO/LL-035
IV-VESUVIO/LL-038
IV-VESUVIO/LL-040
IV-VESUVIO/LL-045
IV-VESUVIO/LL-051
IV-VESUVIO/LL-060
IV-VESUVIO/LL-063
IV-VESUVIO/LL-065
IV-VESUVIO/LL-070
IV-VESUVIO/LL-076
IV-VESUVIO/LL-080
IV-VESUVIO/LL-090
IV-VESUVIO/LL-102
20
25
30
35
38
40
45
51
60
63,5
65
70
76
80
90
102
29
34
39
44
47
50
55
61
70
73,5
75
80
86
90
100
112
bursting
pressure
[bar]
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
bending
radius
[mm]
80
100
120
140
150
160
170
180
190
200
210
230
250
290
330
410
weight
[kg/m]
0,53
0,66
0,75
0,86
0,91
1,02
1,15
1,32
1,53
1,61
1,65
1,76
1,90
2,00
2,37
2,67
standard
length
[m]
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
BOAT SANITARY
Internal layer:
Reinforcement:
External layer:
Working temp.:

White SBR rubber
From -30C to +70C
Characteristics: Hardwall suction-delivery hose used for water supply and sanitary installations. External layer
is resistant to abrasion and weather conditions. It is widely used on pleasure boats, ships,
yachts etc.
code
I.D.
[mm]
O.D.
[mm]
IV-SANITARY-16
IV-SANITARY-19
IV-SANITARY-25
IV-SANITARY-38
16
19
25
38
27
30
36
49
working
pressure
[bar]
3
3
3
3
bursting
pressure
[bar]
9
9
9
9
bending
radius
[mm]
65
80
105
165
weight
[kg/m]
0,60
0,66
0,82
1,17
standard
length
[m]
120
120
120
120
33
STONEHOSE
Internal layer: Black, smooth PVC/NBR compound
Reinforcement: Double polyester cord
External layer: Black or yellow, smooth
PVC/PU compound
Characteristics: Lightweight, very flexible hose designed for compressed air. Highly resistant to abrasion and
mineral oil. Yellow external layer ensures very good hose visibility. It is used for pneumatic
hammers and air-drills.
code
I.D.
[mm]
O.D.
[mm]
ME-STONE-19
ME-STONE-25
19
25
27
35
working
pressure
[bar]
20
20
bursting
press. 20C
[bar]
75
75
bursting
press. 60C
[bar]
55
55
weight
[kg/m]
0,39
0,60
standard
length
[m]
60
60
SUPER NOBELAIR SOFT

Internal layer:
Reinforcement:
External layer:
Working temp.:
Black PVC
Polyester cord
Blue PVC
From -20C to +60C
Characteristics: Highly flexible hose designed for compressed air. Due to such qualities as: lightweight, flexibility
in low temperatures and resistance to elongation it is used for pneumatic tools, compressors,
hose reels, etc.
34
code
I.D.
[mm]
O.D.
[mm]
TR-SUPNOBS-06
TR-SUPNOBS-08
TR-SUPNOBS-09
TR-SUPNOBS-10
TR-SUPNOBS-12
TR-SUPNOBS-16
TR-SUPNOBS-19
TR-SUPNOBS-25
6,3
8
9
10
12,7
16
19
25
11
13
14,5
15,5
19
23
26,5
33,5
working
press. 20C
[bar]
15
15
15
15
15
15
15
15
bursting
press. 20C
[bar]
60
60
60
60
60
60
60
60
bending
radius
[mm]
45
56
63
70
89
112
133
175
weight
[kg/m]
0,09
0,10
0,13
0,14
0,20
0,27
0,34
0,50
standard
length
[m]
50
50
50
50
50
50
50
50
NOBELAIR AS / R
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, antistatic PVC

Polyester cord
Dull blue PVC
From -20C to +60C
Characteristics: Highly flexible hose designed for compressed air. Due to such qualities as: lightweight, flexibility
in low temperatures and resistance to elongation it is used for pneumatic tools, compressors,
hose reels, etc. Manufactured according to EN 14593, EN 14594 standards.
Antistatic (R <106 ), resistant to high ambient temperature and adjusted to decontamination
process (essential when used in breathing apparatus).
code
I.D.
[mm]
O.D.
[mm]
TR-NOBAS/R-06
TR-NOBAS/R-08
TR-NOBAS/R-10
TR-NOBAS/R-13
TR-NOBAS/R-19
6
8
10
12,7
19
12
14
16
19
28
working
press. 20C
[bar]
15
15
15
15
15
bursting
press. 20C
[bar]
60
60
60
60
60
bending
radius
[mm]
40
50
65
80
120
weight
[kg/m]
0,11
0,13
0,15
0,19
0,40
standard
length
[m]
50
50
50
50
50
AIR 20
Internal layer:
Reinforcement:
External layer:
Working temp.:

Synthetic cord
From -20C to +70C
Characteristics: Flexible hose designed for air (oiled air as well), non-aggressive liquids or other industrial
applications. Resistant to abrasion, ageing, ozone and weather conditions.
code
I.D.
[mm]
O.D.
[mm]
IV-AIR20-06
IV-AIR20-07
IV-AIR20-08
IV-AIR20-10
IV-AIR20-13
IV-AIR20-16
IV-AIR20-19
6
7
8
10
13
16
19
14
16
17
19
23
26
30
working
pressure
[bar]
20
20
20
20
20
20
20
bursting
pressure
[bar]
60
60
60
60
60
60
60
bending
radius
[mm]
60
60
65
80
105
130
150
weight
[kg/m]
0,15
0,20
0,21
0,25
0,35
0,40
0,52
standard
length
[m]
100
100
100
100
60
60
60
35

MONTANA 20
Internal layer:
Reinforcement:
External layer:
Working temp.:

Synthetic cord
From -35C to +70C
Characteristics: Flexible hose for air and water used for heavy-duty applications. Internal layer resistant to oil
mist. It is resistant to abrasion and weather conditions.
code
I.D.
[mm]
O.D.
[mm]
IV-MONTA/20-010
IV-MONTA/20-013
IV-MONTA/20-016
IV-MONTA/20-019
IV-MONTA/20-025
IV-MONTA/20-032
IV-MONTA/20-038
IV-MONTA/20-040
IV-MONTA/20-051
IV-MONTA/20-063
IV-MONTA/20-076
IV-MONTA/20-090
IV-MONTA/20-102
10
13
16
19
25
32
38
40
51
63,5
76
90
102
19
23
26
30
35
44
51
54
69
81,5
94,5
110
122
working
pressure
[bar]
20
20
20
20
20
20
20
20
20
20
20
20
20
bursting
pressure
[bar]
60
60
60
60
60
60
60
60
60
60
60
60
60
weight
[kg/m]
0,29
0,38
0,42
0,59
0,61
0,95
1,18
1,22
2,26
2,69
3,12
3,94
4,44
standard
length
[m]
120
120
120
120
120
120
120
120
120
120
120
120
120
ALASKA
Internal layer:
Reinforcement:
External layer:
Working temp.:

Steel braid
Yellow, smooth EPDM rubber
From -30C to +70C
Characteristics: Robust and resistant to the most severe working conditions in mining, quarries, construction
industry, etc. Designed for air applications.
36
code
I.D.
[mm]
O.D.
[mm]
IV-ALASKA-013
IV-ALASKA-019
IV-ALASKA-025
IV-ALASKA-032
IV-ALASKA-038
IV-ALASKA-051
IV-ALASKA-063
IV-ALASKA-076
IV-ALASKA-102
13
19
25
32
38
51
63,5
76
102
25
31,5
37,5
48
55
68
80
96,5
127
working
pressure
[bar]
70
50
45
45
45
40
35
35
30
bursting
pressure
[bar]
210
150
135
135
135
120
105
105
90
weight
[kg/m]
0,57
0,75
0,93
1,58
1,94
2,40
2,85
4,67
7,26
standard
length
[m]
120
120
120
120
120
120
120
120
60

SAHARA BD
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth EPR rubber

Synthetic cord
Blue EPDM rubber
From -40C to +220C
Characteristics: Flexible, kink resistant hose designed for hot air transfer in industrial installations as well as
in cement, feed and tank trucks, etc. External layer resistant to abrasion, ozone and weather
conditions. Fulfils FDA requirements.
code
I.D.
[mm]
O.D.
[mm]
IV-SAHARA/BD-025
IV-SAHARA/BD-032
IV-SAHARA/BD-038
IV-SAHARA/BD-040
IV-SAHARA/BD-051
IV-SAHARA/BD-060
IV-SAHARA/BD-063
IV-SAHARA/BD-076
IV-SAHARA/BD-090
IV-SAHARA/BD-102
25
32
38
40
51
60
63,5
76
90
102
41
48
54
56
69
78
82
94
108
125
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
30
30
30
30
standard
length
[m]
120
120
120
120
120
120
120
120
120
120
SAHARA / LL BD
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth EPR rubber

Blue EPDM rubber
From -40C to +220C
Characteristics: Flexible, kink resistant hose designed for hot air transfer in industrial installations as well as
in cement, feed and tank trucks, etc. External layer resistant to abrasion, ozone and weather
conditions. Fulfils FDA requirements.
code
I.D.
[mm]
O.D.
[mm]
IV-SAHARA/LL/BD-025
IV-SAHARA/LL/BD-032
IV-SAHARA/LL/BD-038
IV-SAHARA/LL/BD-040
IV-SAHARA/LL/BD-051
IV-SAHARA/LL/BD-060
IV-SAHARA/LL/BD-063
IV-SAHARA/LL/BD-076
IV-SAHARA/LL/BD-090
IV-SAHARA/LL/BD-102
25
32
38
40
51
60
63,5
76
90
102
37
44
50
53
64
74
77,5
91
105,5
117,5
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
30
30
30
30
standard
length
[m]
120
120
120
120
120
120
120
120
120
120
37

RAIL BRAKE UIC-830-I-85
Internal layer: Black, smooth synthetic rubber
External layer: Black, smooth synthetic rubber
Characteristics: Flexible hose used for air transfer in railway air brake systems according to UIC-830-I-85
standards.
code
I.D.
[mm]
O.D.
[mm]
IV-RAILBUIC-16
IV-RAILBUIC-18
IV-RAILBUIC-22
IV-RAILBUIC-28
IV-RAILBUIC-30
IV-RAILBUIC-35
16
18
22
28
30
35
32
32
38
46
46
51
working
pressure
[bar]
10
10
10
10
10
10
bursting
pressure
[bar]
70
70
70
70
70
70
weight
[kg/m]
0,52
0,67
0,75
0,82
0,86
0,95
standard
length
[m]
120
120
120
120
120
120
AIR BRAKE
Internal layer:
Reinforcement:
External layer:
Working temp.:

High strength synthetic cord
From -40C to +70C
Characteristics: Hose used for air transfer in car brake systems. Manufactured according to DIN 74310standards.
code
I.D.
[mm]
O.D.
[mm]
IV-AIRBRAKEDIN-11
IV-AIRBRAKEDIN-13
11
13
18
25
working
pressure
[bar]
10
10
bursting
pressure
[bar]
25
25
weight
[kg/m]
0,17
0,40
standard
length
[m]
100
100
BREATHING HOSE
Internal layer:
Reinforcement:
External layer:
Working temp.:

Aramid cord
From -40C to +120C
Characteristics: Very flexible delivery hose designed to convey compressed air or fresh air for breathing. Widely
used in breathing masks and compressed air supply lines. Electrical conductivity of external
and internal layer at 103 /m < R < 108 /m level. Extremely durable and reliable due to its high
resistance to temperature and abrasion. Meets the requirements of EN14593/14594 standard.
38
code
I.D.
[mm]
O.D.
[mm]
TR-5501735
TR-5501738
7,2
9,5
14,2
17,5
working
pressure
[bar]
10
10
bursting
pressure
[bar]
80
80
bending
radius
[mm]
100
125
weight
[kg/m]
0,17
0,24
standard
length
[m]
80
80
HILCOFLEX SPEZIAL 90
Yellow NBR/PVC compound totally
embedded in polyester/polyamide
braid during hose extrusion process
Material:
Characteristics: Heavy duty, delivery hose designed to transfer water or compressed air in irrigation systems,
agriculture, mining, construction sites, etc. The colour (yellow) ensures perfect visibility. Excellent
resistance to abrasion, ozone, weather conditions, oil, fuel and a wide range of chemicals. More
flexible and lightweight compared to standard rubber hoses. Easy handling and storage due to
layflat construction. Does not require cleaning nor drying. For pneumatic hammers and air-drills
there is DN 20 or DN 25 option available, both 20 m long with increased flow claw couplings,
ensuring minimum pressure loss.
code
I.D.
[mm]
GH-HFLEX/S90-020
GH-HFLEX/S90-026
GH-HFLEX/S90-038
GH-HFLEX/S90-052
20
26
38
52
GH-HFLEX/S90-020/20
GH-HFLEX/S90-026/20
20
26
wall
thickness
[mm]
working pressure
[bar]
water
air
2,3
30
22
2,5
30
22
3,3
30
22
3,3
30
22
HILCOFLEX SPEZIAL 90 assembly
2,3
30
22
2,5
30
22
bursting
pressure
[bar]
weight
[kg/m]
standard
length
[m]
90
90
90
90
0,19
0,23
0,40
0,60
100
100
100
100
90
90
0,19
0,23
20
20
INDUSTRIAL / SR
Internal layer: Smooth synthetic rubber
Reinforcement: Polyester braid with polyester helix wire
Characteristics: Very lightweight, flexible hose designed for fire protection in buildings, transfer of air, dust or
light solid particles. Manufactured according to EN 694 specifications.
code
I.D.
[mm]
O.D.
[mm]
BZ-INDUSTRIAL/SR-25
25
29
working
pressure
[bar]
12
bursting
pressure
[bar]
42
standard
length
[m]
100
39

JAMAICA L
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth PVC

Polyester cord
Blue, yellow or black PVC
From -10C to +60C
Characteristics: Very lightweight, flat (when not used) delivery hose designed for water transfer. Widely used
in agriculture, mining, shipbuilding, etc.
40
code
I.D.
[mm]
ME-JAMAIL-020
ME-JAMAIL-025
ME-JAMAIL-032
ME-JAMAIL-035
ME-JAMAIL-038
ME-JAMAIL-040
ME-JAMAIL-045
ME-JAMAIL-051
ME-JAMAIL-063
ME-JAMAIL-070
ME-JAMAIL-076
ME-JAMAIL-080
ME-JAMAIL-090
ME-JAMAIL-102
ME-JAMAIL-110
ME-JAMAIL-127
ME-JAMAIL-152
ME-JAMAIL-204
20
25
32
35
38
40
45
51
63
70
76
80
90
102
110
127
152
204
working
pressure
[bar]
8,5
8,5
8,5
8,5
8,5
8,5
6,5
6,5
6,5
5,5
5,5
5,5
5,5
5,5
5,5
3
3
2,5
bursting
pressure
[bar]
25,5
25,5
25,5
25,5
25,5
25,5
19,5
19,5
19,5
16,5
16,5
16,5
16,5
16,5
16,5
9
9
7
weight
[kg/m]
0,13
0,15
0,21
0,22
0,24
0,25
0,28
0,32
0,42
0,45
0,52
0,58
0,66
0,72
0,78
1,13
1,35
2,00
standard
length
[m]
50/100
50/100
50/100
50/100
50/100
50/100
50/100
50/100
50/100
50/100
50/100
50/100
50/100
50/100
50/100
50/100
50/100
50
HILCOFLEX
Black NBR/PVC compound totally
embedded in polyester/polyamide
braid during hose extrusion process
Material:
Characteristics: Heavy duty, delivery hose designed to transfer water or compressed air in irrigation systems,
agriculture, mining, construction sites, etc. Resistant to abrasion, ozone, weather conditions,
oiil, fuel and a wide range of chemicals. More flexible and lightweight compared to standard
rubber hoses. Easy handling and storage since the hose is a layflat type. Does not require
cleaning nor drying. Lengths up to 200m available from 76 mm diameter.
code
I.D.
[mm]
wall
thickness
[mm]
GH-HFLEX-020
GH-HFLEX-026
GH-HFLEX-032
GH-HFLEX-035
GH-HFLEX-038
GH-HFLEX-045
GH-HFLEX-052
GH-HFLEX-055
GH-HFLEX-060
GH-HFLEX-065
GH-HFLEX-070
GH-HFLEX-076
GH-HFLEX-080
GH-HFLEX-090
GH-HFLEX-102
GH-HFLEX-110
GH-HFLEX-120
GH-HFLEX-127
GH-HFLEX-152
GH-HFLEX-203
20
26
32
35
38
45
52
55
60
65
70
76
80
90
102
110
120
127
152
203
2
2
2
2
2
2,2
2,2
2,2
2,2
2,2
2,3
2,5
2,5
2,8
2,8
3
3
3
3
3,3
working pressure
[bar]
air
18
18
15
12
12
12
12
12
12
12
12
12
12
12
12
12
11
11
10
10
water
25
25
20
16
16
16
16
16
16
16
16
16
16
16
16
16
15
15
14
14
bursting
pressure
[bar]
weight
[kg/m]
standard
length
[m]
75
75
60
50
50
50
50
50
50
50
50
50
50
50
50
50
45
45
42
42
0,16
0,18
0,23
0,25
0,28
0,35
0,40
0,44
0,47
0,51
0,60
0,68
0,75
0,90
1,00
1,10
1,30
1,40
1,70
2,40
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
INDUSTRIAL / PVC
Internal layer: Smooth PVC
Reinforcement: Polyester braid
Characteristics: Very lightweight, flexible hose for general application. Widely used in industry, agriculture and on
construction sites. Delivered as complete hose assemblies with aluminium STORZ couplings.
code
I.D.
[mm]
BZ-INDUSTRIAL/PVC-45/20
45
working
pressure
[bar]
8
bursting
pressure
[bar]
20
lug
distance
[mm]
C-66
standard
length
[m]
20
41
FIRE UNIVERSAL
Internal layer: PVC inner lining
Characteristics: Very lightweight, flexible hose designed for fire protection in buildings, fire hydrants and other
equipment used by firefigthers. Widely used in all branches of civil engineering. Manufactured
according to EN 14540 specifications.
code
BZ-FIRE/U-025/15
BZ-FIRE/U-025/20
BZ-FIRE/U-052/15
BZ-FIRE/U-052/20
BZ-FIRE/U-075/20
BZ-FIRE/U-110/20
BZ-FIRE/U-025
BZ-FIRE/U-052
BZ-FIRE/U-075
BZ-FIRE/U-110
working
bursting
pressure
pressure
[bar]
[bar]
hose assembly with STORZ couplings
25
15
45
25
15
45
52
15
45
52
15
45
75
15
45
110
12
36
hose
25
15
45
52
15
45
75
15
45
110
12
36
I.D.
[mm]
lug
distance
[mm]
standard
length
[m]
D-31
D-31
C-66
C-66
B-89
A-133
15
20
15
20
20
20
100
100
100
100
FIRE UNIVERSAL / PU
Internal layer:
Reinforcement:
External layer:
Working temp.:
Smooth polyurethane
Polyester braid
Red polyurethane coating
From -40C to +70C
Characteristics: Very lightweight, flexible hose designed for fire protection in buildings, fire pumps, water pumps
and other equipment used by firefighters. Widely used in all branches of civil engineering.
Polyurethane external layer is dirt repellent and increases resistance to wear and abrasion.
code
BZ-FIRE/U/PU-052/20
BZ-FIRE/U/PU-075/20
BZ-FIRE/U/PU-110/20
BZ-FIRE/U/PU-052
BZ-FIRE/U/PU-075
BZ-FIRE/U/PU-110
42
working
bursting
pressure
pressure
[bar]
[bar]
hose assembly with STORZ couplings
52
15
45
75
15
45
110
12
36
hose
52
15
45
75
15
45
110
12
36
I.D.
[mm]
lug
distance
[mm]
standard
length
[m]
C-66
B-89
A-133
20
20
20
100
100
100
SNOWBLAST
Internal layer: EPDM rubber
External layer: Special, yellow coating
resistant to abrasion
Characteristics: Special high pressure hose designed for snow guns, resistant to abrasion, UV radiation, weather
conditions and ozone. The colour (yellow) of the external layer ensures perfect visibility even
on snow. Delivered as complete hose assemblies with CAMLOCK C and E couplings made of
AISI 316, maximum working pressure 60 bar.
code
I.D.
[mm]
GH-SNOWBLAST-52/10
GH-SNOWBLAST-52/20
52
52
wall
thickness
[mm]
4
4
working
pressure
[bar]
60
60
bursting
pressure
[bar]
150
150
weight
[kg/m]
length
[m]
0,7
0,7
10
20
GREEN
Material:
PVC
Reinforcement: Rigid PVC wire helix
Characteristics: Flexible hose designed for water and sewage. Used in industrial applications. Due to high
resistance to low temperature it is widely used to empty septic tanks. Version with antistatic
wire is available on request.
code
I.D.
[mm]
O.D.
[mm]
ME-GREEN-051
ME-GREEN-063
ME-GREEN-076
ME-GREEN-080
ME-GREEN-102
ME-GREEN-110
ME-GREEN-127
ME-GREEN-152
51
63,5
76
80
102
110
127
152
62
75,5
89
93
116
125
144
170
working
press. 20C
[bar]
4,5
4
3,5
3,5
3
2,7
2,3
1,8
vacuum
[bar]
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
bending
radius
[mm]
200
250
300
320
400
440
500
600
weight
[kg/m]
0,96
1,30
1,70
1,75
2,60
3,00
3,60
4,70
standard
length
[m]
30
30
30
30
30
30
20/30
20/30
43
ARIZONA SUPERELASTIC
Material:
PVC
Reinforcement: Rigid PVC helix wire
Characteristics: Flexible hose designed for water and sewage. Widely used to empty septic tanks, in irrigation
systems, to transfer water in industrial systems, etc. Remains very flexible at low temperature.
Available as an AS antistatic type with antistatic wire or ARIZONA EXTREME ELASTIC that
remains flexible even at very low temperature (up to -40C).
code
I.D.
[mm]
wall
thickness
[mm]
ME-ARIZONA/S-025
ME-ARIZONA/S-032
ME-ARIZONA/S-038
ME-ARIZONA/S-045
ME-ARIZONA/S-050
ME-ARIZONA/S-060
ME-ARIZONA/S-063
ME-ARIZONA/S-075
ME-ARIZONA/S-076
ME-ARIZONA/S-080
ME-ARIZONA/S-090
ME-ARIZONA/S-100
ME-ARIZONA/S-102
ME-ARIZONA/S-110
ME-ARIZONA/S-120
ME-ARIZONA/S-125
ME-ARIZONA/S-127
ME-ARIZONA/S-130
ME-ARIZONA/S-133
ME-ARIZONA/S-150
ME-ARIZONA/S-152
ME-ARIZONA/S-160
ME-ARIZONA/S-200
25
32
38
45
50
60
63
75
76
80
90
100
102
110
120
125
127
130
133
150
152
160
200
4,4
4,4
4,4
5
5,5
5,6
6
6,5
6,5
6,5
6,7
7,4
7,3
7,5
8
8,3
8,3
8,5
8,5
9
9
9,4
13
ME-ARIZONA/S/AS-076
ME-ARIZONA/S/AS-102
ME-ARIZONA/S/AS-127
ME-ARIZONA/S/AS-152
76
102
127
152
6,5
7,3
8,3
9
44
working
vacuum
press. 20C
[bar]
[bar]
standard version
7
0,9
6
0,9
6
0,9
5,5
0,9
5
0,9
4,5
0,9
4,5
0,9
4
0,9
4
0,9
3,5
0,9
3,5
0,9
3
0,9
3
0,9
3
0,9
2,5
0,9
2,5
0,9
2,5
0,9
2,5
0,9
2
0,9
2
0,9
2
0,9
2
0,9
1,5
0,9
antistatic version
4
0,9
3
0,9
2,5
0,9
2
0,9
bending
radius
[mm]
weight
[kg/m]
standard
length
[m]
100
130
150
180
200
240
250
300
300
320
360
400
400
440
480
500
510
520
550
600
610
640
800
0,50
0,60
0,70
0,90
1,05
1,25
1,39
1,70
1,70
1,85
2,25
2,70
2,70
3,10
3,60
3,90
3,90
4,10
4,20
5,00
5,00
5,60
10,00
50
50
50
50
50
50
50
30
30
30
30
30
30
20
20
20
20
20
20
20
20
20
-
300
400
510
610
1,71
2,72
3,92
5,03
30
30
20
20
GENESIS ToiVac
Material:
Polyethylene
Reinforcement: Polyethylene profile
Characteristics: Flexible hose designed for water and sewage. Due to high resistance to low temperature it
is widely used as an empting hose for septic tanks, portable restrooms, toilets. Delivered in
lengths listed below with welded cuffs as a standard.
code
SC-GENESIS/TV-051/10
I.D.
[mm]
vacuum
[bar]
bending
radius
[mm]
51
0,95
85
63
0,95
105
76
0,9
125
102
0,85
165
weight
[kg/pcs]
length
[m]
11,00
16,50
22,00
12,50
18,80
25,00
15,00
22,50
30,00
20,00
30,00
40,00
10
15
20
10
15
20
10
15
20
10
15
20
code
description
SC-GENESIS/TV-51K
SC-GENESIS/TV-63K
SC-GENESIS/TV-76K
cuff for GENESIS 51 mm

HI-VAC
Internal layer:
Reinforcement:
External layer:
Working temp.:
Polyethylene
Rigid helix wire
Polyethylene
From -45C to +65C
Characteristics: Flexible hose designed for water and sewage. Due to high resistance to low temperature it
is widely used as an empting hose for septic tanks, portable restrooms, toilets. Delivered in
lengths listed below with welded cuffs as a standard.
code
PR-HIVAC-51/03
PR-HIVAC-51/09
PR-HIVAC-51/12
PR-HIVAC-51/15
PR-HIVAC-51/18
I.D.
[mm]
51
O.D.
[mm]
70
bursting
pressure
[bar]
4
vacuum
[bar]
0,98
bending
radius
[mm]
weight
[kg/pcs]
length
[m]
125
3,80
11,60
15,50
19,30
23,30
3
9,15
12,2
15,2
18,3
45
JETON
Material:
Acetal (POM)
Working temp.: To +65C
Characteristics: The coolant hose, designed for low pressure transfer of air, water, oil and other coolants used
during metalworking process. Made of acetal that is resitant to corrosion, solvent, oil and
lubricant, ensures that hose assemblies are elastic and rigid. Due to the special construction
and the way of joining elements it is really easy to direct the jet of coolant, adjust length, change
the arrangement by adding or detaching particular elements (connect and disconnect using
special pliers or manually). Highly resistant to abrasion and vibrasion. The hose holds its shape
in 100% and does not cause any damage to cutting blades. Available in 4 sizes (flow diameter
1/4, 3/8, 1/2 and 3/4).
code
I.D.
[inch]
length
[mm]
JT-62720
JT-62721
JT-63720
JT-63721
JT-64720
JT-64721
1/4
1/4
3/8
3/8
1/2
1/2
330
330
360
360
330
330
number
of segments
[pcs]
20
20
16
16
12
12
thread
[NPT]
press
[bar]
flow max.
[l/min.]
1/4 male
1/4 female
3/8 male
3/8 female
1/2 male
1/2 female
23
23
23
23
1,4 2
1,4 2
900
900
1500
1500
1700
1700
HYDRAFIX FR 201
Internal layer:
Black PVC
Reinforcement: Steel supporting coil (additional
nickel-plated steel helix protection
up to DN 10)
Working press.: 4 bar
Characteristics: The hose designed for low pressure transfer of air, water, oil and other coolants used during
metalworking process. Due to the special construction, the hose once bent remains in that
position. It allows to to direct the jet of coolant precisely in the desired direction. Delivered as
complete hose assemblies with BSP male thread and an outlet nozzle. An exemplary code of
DN 6 hose assembly, 500 mm long: WR-FR201-06/500.
46
code
DN
[mm]
thread
[inch]
WM-FR201-04/...
WM-FR201-06/...
WM-FR201-08/...
WM-FR201-10/...
WM-FR201-16/...
4
6
8
10
16
1/8
1/4
3/8
1/2
3/4
spanner
size
[mm]
15
19
24
27
36
bending
radius
[mm]
64
72
88
110
110
length
[mm]
200
200
-
250
250
250
-
320
320
320
320
-
400
400
400
400
-
500
500
500
500
630
630
630
630
800
-
INDUSTRIAL HOSES - steam

Selection, installation and handling of steam hoses
This manual refers to selection, installation and handling of steam rubber hoses. It includes safety guidelines that
should be strictly obeyed by the user.
HOSE SELECTION
To select an appropriate hose for steam application we have to determine its working conditions at first:
- maximum working pressure of steam,
- steam temperature,
- kind of steam: wet saturated steam (with water particles), dry saturated steam, superheated steam,
- whether sudden increase of pressure occurs in the hose,
- whether the hose is bent during its work under pressure,
- whether the hose is used continuously or occasionally,
- whether the hose requires manual handling,
- external working conditions of the site where the hose is to work (possibility of mechanical abuse, presence of
spilled or condensing aggressive chemicals or oils that may have an effect on the external layer of the hose).
Dependence of saturated steam temperature on its pressure

(overpressure - indicated by pressure gauge)
press.
[bar]
temp.
[C]
10
11
12
13
14
15
16
17
18
19
20
22
24
120 134 144 152 159 165 171 175 180 184 188 192 195 198 201 207 207 210 213 215 220 224
Hose designed for steam transfer should be properly marked on its cover. To match the hose with its working
conditions, contact Sales or Technical Department of TUBES INTERNATIONAL.
HOSE MOUNTING
It is vital to obey general rules concerning flexible hose installation (check Technical Information chapter). Make
sure that fittings (hose couplings) are designed for steam. TUBES INTERNATIONAL advises to use only fittings
specially designed for steam that are fitted on a hose with the use of bolt screw clamps. This type of clamp allows
the connection to be tightened. Selection and installation guidelines provided by a supplier must be obeyed while
installing the fittings. Clamp bolts must be tightened during operation. Tightening of the bolts should always be
checked before the hose is used. It is important to avoid excessive bending of the hose next to hose fittings.
clamp claw
(the distance to the neck of a fitting)
there should be consistent gap

between the clamp halves after
the clamp is screwed together
retaining collar
hose should not

bepinched
47
TUBES INTERNATIONAL warns against using steam hoses with fittings assembled on a hose with a crimped
ferrule. Such an assembly method does not allow to tighten it during operation. It is very important as
during operation the elastic quality of hose material (rubber) is gradually decreasing. When a clamp cannot
be tightened a leakage or even a catastrophic burst from the fitting of a hose can occur !
STORAGE
A hose that is not used should be stored in a proper way on a suitable stand or a pallet. Appropriate storage reduces
the danger of hose damage. We must not hang a hose on a hook, nail or other rail that may cause puncture or
damage.
REGULAR MAINTENANCE AND INSPECTION OF STEAM HOSES
All rubber steam hose wear away during their working life. For safety reasons regular maintenance and inspection
of steam hoses is of primary importance. Staff handling the hose should pay special attention to:
- rubber pellets or blisters occurring on the hose cover,
- cracks that expose the hose braid,
- leakage of steam occurring near hose fittings or in other hose parts,
- flattening or kinks that may cause hose damage in the future,
- decrease in steam flow indicating swelling of internal layer.
If any of the above occurs, the hose must be shut down from operation immediately. The hose must be thoroughly
inspected before next use.
Hose damage usually happens on its ends, as they are excessively exposed to bending and deformation (near
hose fittings). If such damage occurs, we have to cut off the damaged end and mount the fitting once again.
Hoses regularly used at high temperature should undergo routine inspection every now and then to check if the
internal layer gets tough. In most cases removing the clamps to perform the inspection is required.
SAFETY REGULATION
- Staff must wear suitable working clothes, gloves, rubber shoes and eye safety protection. Working clothes
prevent the body from burns in case of a steam or hot water burst.
- Staff must make sure that working area is danger free and tidy.
- Staff must tightening of all connections before turning on an installation.
- One must not leave the hose under pressure when an installation is shut down as it gradually shortens the
working life of a hose.
ATTENTION !!!
Steam is dangerous. It can cause destruction of equipment, serious injury or even death. In
order to prevent such accidents we have to select a correct hose and put all safety guidelines
concerning installation, maintenance, service and storage into use.
48
STEAM
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth EPDM/SBR rubber

Textile cord
Black, smooth EPDM/SBR rubber
Up to +143C
Characteristics: Delivery hose designed to transfer hot water and saturated steam. External layer resistant to
weather conditions, high temperature and ozone.
code
I.D.
[mm]
O.D.
[mm]
PR-STEAM-013
PR-STEAM-016
PR-STEAM-020
PR-STEAM-025
PR-STEAM-032
12,5
16
20
25
31,5
20,5
24
30
35
41,9
working
pressure
[bar]
4
4
4
4
4
bursting
pressure
[bar]
40
40
40
40
40
weight
[kg/m]
0,27
0,33
0,57
0,68
0,87
standard
length
[m]
50
50
40
40
40
MANITOBA
Internal layer:
Reinforcement:
External layer:
Working temp.:

Syntethetic cord
From -40C to +163C
Characteristics: Delivery hose designed to transfer saturated steam. Good resistance to high temperature,
ozone and abrasion.
code
I.D.
[mm]
O.D.
[mm]
IV-MANITOBA-010/20
IV-MANITOBA-013/21,5
IV-MANITOBA-013/23
IV-MANITOBA-016/25
IV-MANITOBA-019/29
IV-MANITOBA-019/32
IV-MANITOBA-025/35
IV-MANITOBA-025/38
IV-MANITOBA-032/44
IV-MANITOBA-038/50
IV-MANITOBA-038/54
IV-MANITOBA-051/67
IV-MANITOBA-076/94
IV-MANITOBA-102/122
10
13
13
16
19
19
25
25
32
32
38
38
51
63,5
76
76
102
20
21,5
23
25
29
32
35
38
44
46,5
50
54
67
80,5
94
96,5
122
working
pressure
[bar]
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
bursting
pressure
[bar]
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
weight
[kg/m]
0,24
0,23
0,29
0,31
0,39
0,54
0,49
0,67
0,71
0,90
0,82
1,18
1,52
2,17
2,75
2,78
4,10
standard
length
[m]
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
49

PATOS
Internal layer:
Reinforcement:
External layer:
Working temp.:

Nylon cord
Blue, smooth NBR rubber
From -40C to +160C
(water to +100C)
Characteristics: Delivery hose designed to steam and hot water transfer. External layer resistant to animal and
vegetable oil. Widely used in food industry. Internal layer Fulfils FDA standards.
code
I.D.
[mm]
O.D.
[mm]
IV-PATOS-013
IV-PATOS-016
IV-PATOS-019
IV-PATOS-025
IV-PATOS-032
IV-PATOS-038
IV-PATOS-051
IV-PATOS-065
13
16
19
25
32
38
51
65
23
26
31
35
48
54
69,5
79
working
pressure
water/steam
[bar]
10 / 6
10 / 6
10 / 6
10 / 6
10 / 6
10 / 6
10 / 6
10 / 6
safety
factor
water/steam
weight
[kg/m]
standard
length
[m]
3 / 10
3 / 10
3 / 10
3 / 10
3 / 10
3 / 10
3 / 10
3 / 10
0,38
0,45
0,63
0,64
1,35
1,55
2,32
2,01
120
120
120
120
120
120
120
120
VICTORIA
Reinforcement: Plies of steel wire cord
External layer: Black (red), smooth EPDM rubber
(pin-pricked)
Characteristics: High pressure delivery hose designed for superheated steam. External layer resistant to high
temperature and weather conditions. A version with red external layer has a thicker wall.
code
I.D.
[mm]
O.D.
[mm]
IV-VICTORIA-008
IV-VICTORIA-010
IV-VICTORIA-013
IV-VICTORIA-016
IV-VICTORIA-019
IV-VICTORIA-025
IV-VICTORIA-032
IV-VICTORIA-038
IV-VICTORIA-051
IV-VICTORIA-063
IV-VICTORIA-076
IV-VICTORIA-102
8
10
13
16
19
25
32
38
51
63,5
76
102
20
22
25
27
30
37
44,5
52
65,5
81,5
96,5
124
working
pressure
[bar]
18
18
18
18
18
18
18
18
18
18
18
18
bursting
pressure
[bar]
180
180
180
180
180
180
180
180
180
180
180
180
An exemplary code of the hose with red external layer: IV-VICTORIA-025R.
50
weight
[kg/m]
0,37
0,42
0,50
0,58
0,66
0,89
1,13
1,46
2,11
3,33
4,35
6,73
standard
length
[m]
60
60
60
60
60
60
60
60
60
60
60
60
VICTORIA EN ISO 6134

(pin-pricked)
Characteristics: High pressure delivery hose designed for superheated steam. External layer resistant to high
temperature and weather conditions. Antistatic - R<106 .
Standards:
ISO 6134/05.
code
I.D.
[mm]
O.D.
[mm]
IV-VICTORIA/EN-19
IV-VICTORIA/EN-25
IV-VICTORIA/EN-32
IV-VICTORIA/EN-38
IV-VICTORIA/EN-51
19
25
32
38
51
33
39,5
48
54
69
working
pressure
[bar]
18
18
18
18
18
bursting
pressure
[bar]
180
180
180
180
180
weight
[kg/m]
0,77
1,06
1,40
1,60
2,57
standard
length
[m]
120
120
120
120
120
VAPOFER
(pin-pricked)
Characteristics: High pressure delivery hose designed for superheated steam. External layer resistant to oil,
high temperature and weather conditions.
code
I.D.
[mm]
O.D.
[mm]
IV-VAPOFER-013
IV-VAPOFER-019
IV-VAPOFER-025
IV-VAPOFER-032
IV-VAPOFER-038
IV-VAPOFER-051
IV-VAPOFER-063
IV-VAPOFER-076
IV-VAPOFER-102
13
19
25
32
38
51
63,5
76
102
27
33,5
40
48
54
69
84
101
128
working
pressure
[bar]
18
18
18
18
18
18
18
18
18
bursting
pressure
[bar]
180
180
180
180
180
180
180
180
180
weight
[kg/m]
0,60
0,86
1,18
1,40
1,60
2,56
3,72
5,24
6,95
standard
length
[m]
120
120
120
120
120
120
120
120
120
51

Fittings for steam hoses
MS fitting
Material: Steel, malleable iron, stainless steel, brass
Characteristics: Male BSPT thread fitting that provides a safe connection between a hose and an installation.
Assembled on the hose with a SBC clamp.
code
(steel)
DX-MS-04-04
code
(malleable iron)
-
code
(stainless steel)
-
code
(brass)
-
thread
[inch]
1/4
hose I.D.
[inch]
1/4
DX-MS-04-06
3/8
1/4
DX-MS-06-06
3/8
3/8
DX-MS-08-08
DX-MS-08-08-SS
1/2
1/2
DX-MS-12-12
DX-MS-12-12-SS
DX-MS-12-12-B
3/4
3/4
DX-MS-12-16
3/4
DX-MS-16-12
3/4
DX-MS-16-16
DX-MS-16-16-SS
DX-MS-16-16-B
DX-MS-20-20
DX-MS-20-20-SS
DX-MS-20-20-B
1.1/4
1.1/4
1.1/2
DX-MS-24-24
DX-MS-24-24-SS
DX-MS-24-24-B
1.1/2
DX-MS-32-32
DX-MS-32-32-SS
DX-MS-32-32-B
DX-MS-40-40
DX-MS-40-40-SS
2.1/2
2.1/2
DX-MS-48-48
DX-MS-48-48-SS
DX-MS-48-48-B
DX-MS-64-64
GF fitting
Material: Steel/malleable iron, stainless steel, brass
Characteristics: Female BSP thread fitting that provides a safe connection between a hose and an installation.
Assembled on the hose with a SBC clamp.
52
code
(steel/malleable iron)
DX-GF-04-04
code
(stainless steel)
-
code
(brass)
-
thread
[inch]
1/4
hose I.D.
[inch]
1/4
DX-GF-06-06
3/8
3/8
DX-GF-08-08
1/2
1/2
DX-GF-12-12
DX-GF-12-12-SS
DX-GF-12-12-B
3/4
3/4
DX-GF-16-16
DX-GF-16-16-SS
DX-GF-16-16-B
DX-GF-20-20
DX-GF-20-20-SS
DX-GF-20-20-B
1.1/4
1.1/4
DX-GF-24-24
DX-GF-24-24-SS
DX-GF-24-24-B
1.1/2
1.1/2
DX-GF-32-32
DX-GF-32-32-SS
DX-GF-32-32-B
DX-GF-40-40
2.1/2
2.1/2
DX-GF-48-48
DX-GF-64-64
DX-GF-80-80

SBC clamp for MS, GF fittings
Material: Malleable iron, stainless steel, brass
Characteristics: Clamp designed to assemble MS and GF fittings on a hose.

Minimum and maximum diameter listed in the chart, is only an indication for a clamp choice.
Structure of the hose may vary so it is essential to check if the actual size of a clamp matches.
Clamps should be regularly checked and tightened during operation.
code
(malleable iron)
code
(stainless steel)
code
(brass)
hose I.D.
[inch]
DX-SBC2-04-14/17
DX-SBC2-06-17/22
DX-SBC2-08-20/24
DX-SBC2-08-24/27
DX-SBC2-12-27/30
DX-SBC2-12-30/33
DX-SBC2-12-33/38
DX-SBC2-12-38/43
DX-SBC4-08-23/26
DX-SBC4-16-35/40
DX-SBC4-16-39/43
DX-SBC4-16-43/49
DX-SBC4-16-49/54
DX-SBC4-20-38/45
DX-SBC4-20-45/53
DX-SBC4-20-54/60
DX-SBC4-24-46/51
DX-SBC4-24-51/56
DX-SBC4-24-55/60
DX-SBC4-24-60/65
DX-SBC4-24-65/70
DX-SBC4-32-57/63
DX-SBC4-32-59/64
DX-SBC4-32-63/71
DX-SBC4-32-70/78
DX-SBC4-32-78/87
DX-SBC4-40-78/87
DX-SBC4-40-89/100
DX-SBC4-48-89/100
DX-SBC4-48-96/103
DX-SBC4-48-103/113
DX-SBC6-48-108/122
DX-SBC6-64-117/127
DX-SBC6-64-123/133
DX-SBC6-64-133/142
DX-SBC6-64-140/151
DX-SBC6-80-174/187
DX-SBC6-80-190/203
DX-SBC2-08-24/27-SS
DX-SBC2-12-30/33-SS
DX-SBC2-12-33/38-SS
DX-SBC4-16-39/43-SS
DX-SBC4-16-43/49-SS
DX-SBC4-20-54/60-SS
DX-SBC4-24-55/60-SS
DX-SBC4-24-60/65-SS
DX-SBC4-32-63/71-SS
DX-SBC4-32-70/78-SS
-
DX-SBC2-08-24/27-B
DX-SBC2-12-30/33-B
DX-SBC2-12-33/38-B
DX-SBC4-16-39/43-B
DX-SBC4-16-43/49-B
DX-SBC4-20-54/60-B
DX-SBC4-24-55/60-B
DX-SBC4-24-60/65-B
DX-SBC4-32-63/71-B
DX-SBC4-32-70/78-B
-
1/4
3/8
1/2
1/2
1/2
3/4
3/4
3/4
1/2
1
1
1
1
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2
2
2
2
2
2.1/2
2.1/2
3
3
3
3
4
4
4
4
6
6
hose O.D.
[mm]
min.
max.
14
17
17,5
22
20,5
24
24
27
27
30
30
33
33
38
38
43
23
26
35,5
40
39
43,5
43
49
49
54
38
45,5
45,5
53
54
60
46
51
51
56
55,5
60
60
65
65
70
57
63,5
59,5
64
63,5
71
70
78
78,8
87,5
78,5
87,5
89
100
89
100
96,5
103
103
113
108
122
117,5
127
123,5
133,5
133,5
142
140,5
151
174,5
187
190
203
number
of
bolts
53

VSS, MSS fittings
St (carbon steel),
SS (AISI 316 Ti stainless steel)
Ms (brass)
Working press.: 18 bar (+210C) - saturated steam, for
other application at ambient temp. up
to 160 bar,
brass - 64 bar (contact Technical
Department for advice)
Material:
Characteristics: Fittings designed for steam rubber hoses. Assembled on the hose using clamps according to
DIN 2826.
VSS fitting with a male thread
code
DN
thread
RS-321130050110
RS-321130050120
RS-321130050130
1/2 BSPT
RS-321130050310
DN 15
RS-321130050320
(1/2)
RS-321130050330
RS-321130075110
1/2 NPT
3/4 BSPT
RS-321130075120
RS-321190075110
RS-321190075120
RS-321190075130
RS-321190075310
RS-321190075320
RS-321190075330
3/4 BSPT
DN 20
(3/4)
RS-321190100110
3/4 NPT
1 BSPT
RS-321190100120
RS-321250100110
RS-321250100120
RS-321250100130
DN 25
RS-321250100310
(1)
1 BSPT
MSS fitting with a female thread

seal-face
material
code
seal-face
material
thread/flat
St
RS-121130050111
flat
St
thread/flat
SS
RS-131130050111
cone
St
thread/flat
Ms
RS-121130050122
SS
thread
St
RS-121130050133
DN 15
flat
thread
SS
RS-131130221433
(1/2)
thread
Ms
RS-121130075111
thread/flat
St
RS-121130075122
1/2 BSP
flat
Ms
M22x1,5
cone
Ms
flat
St
3/4 BSP
flat
SS
thread/flat
SS
RS-121130075133
flat
Ms
St
RS-121190075111
flat
St
thread/flat
SS
RS-131190075111
cone
St
thread/flat
Ms
RS-121190075122
flat
SS
flat
Ms
cone
Ms
3/4 BSP
thread
St
RS-121190075133
DN 20
thread
SS
RS-131190301433
thread
Ms
RS-121190100111
(3/4)
thread/flat
St
RS-121190100122
M30x1,5
1 BSP
flat
St
flat
SS
thread/flat
SS
RS-121190100133
flat
Ms
thread/flat
St
RS-121250100111
flat
St
thread/flat
SS
RS-131250100111
cone
St
thread/flat
Ms
RS-121250100122
flat
SS
flat
Ms
cone
Ms
thread
St
RS-121250100133
SS
RS-131250381433
RS-321250100330
thread
Ms
RS-121250125111
RS-321320125110
thread/flat
St
RS-121250125122
thread/flat
SS
thread/flat
Ms
thread
1 NPT
thread
thread/flat
thread
RS-321250100320
DN
1 BSP
DN 25
(1)
M38x1,5
flat
St
flat
SS
RS-121250125133
flat
Ms
RS-121320125111
flat
St
St
RS-131320125111
cone
St
thread
SS
RS-121320125122
flat
SS
RS-321320125330
thread
Ms
RS-121320125133
RS-321380150110
thread/flat
St
RS-131320451433
thread/flat
SS
RS-121380150111
thread/flat
Ms
RS-131380150111
thread
St
RS-121380150122
thread
SS
RS-121380150133
thread
Ms
RS-131380521433
thread/flat
St
RS-121500200111
thread/flat
SS
RS-131500200111
thread/flat
Ms
RS-121500200122
RS-321320125120
RS-321320125130
RS-321320125310
RS-321320125320
RS-321380150120
RS-321380150130
RS-321380150310
RS-321380150320
DN 32
(1.1/4)
DN 40
(1.1/2)
1.1/4 BSPT
1.1/4 NPT
1.1/2 BSPT
1.1/2 NPT
RS-321380150330
RS-321500200110
RS-321500200120
RS-321500200130
DN 50
RS-321500200310
(2)
RS-321500200320
RS-321500200330
54
2 BSPT
2 NPT
thread
St
RS-121500200133
thread
SS
RS-131500652433
thread
Ms
1.1/4 BSP
DN 32
1.1/4 BSP
(1.1/4)
M45x1,5
DN 40
1.1/2 BSP
(1.1/2)
M52x1,5
DN 50
2 BSP
(2)
M65x2
flat
Ms
cone
Ms
flat
St
cone
St
flat
SS
flat
Ms
cone
Ms
flat
St
cone
St
flat
SS
flat
Ms
cone
Ms

Swivel flange FSS
St (carbon steel),
to 160 bar,
From DN 65 - 64 bar (contact Technical
Material:
Characteristics: Swivel flange designed for steam rubber hoses. Assembled on the hose using clamps according
to DIN 2826.
code
size
flange
material
St
RS-970038000211
PN 10/16
SS/St
RS-970038000221
SS
RS-970038000222
St
RS-970038000411
DN 40
SS/St
RS-970038000421
(1.1/2)
RS-970013000211
RS-970013000221
RS-970013000222
RS-970013000411
DN 15
RS-970013000421
(1/2)
PN 25/40
RS-970013000422
code
size
flange
material
PN 10/16
SS/St
St
SS
St
PN 25/40
SS
RS-970038000422
RS-970013000711
ASA 150
St
RS-970038000711
ASA 150
RS-970013000811
ASA 300
St
RS-970038000811
ASA 300
St
RS-970050000211
SS/St
RS-970050000221
SS
RS-970050000222
St
RS-970050000411
SS/St
RS-970050000421
SS
RS-970050000422
RS-970019000211
RS-970019000221
PN 10/16
RS-970019000222
RS-970019000411
RS-970019000421
DN 20
(3/4)
PN 25/40
RS-970019000422
SS/St
SS
St
St
St
PN 10/16
SS/St
SS
DN 50
(2)
St
PN 25/40
SS/St
SS
RS-970019000711
ASA 150
St
RS-970050000711
ASA 150
RS-970019000811
ASA 300
St
RS-970050000811
ASA 300
St
St
RS-970065000211
PN 10/16
St
SS/St
RS-970065000411
DN 65
PN 25/40
St
SS
RS-970065000711
(2.1/2)
ASA 150
St
St
RS-970065000811
ASA 300
St
SS/St
RS-970075000021
PN 10/16
St
PN 25/40
St
ASA 150
St
RS-970025000211
RS-970025000221
PN 10/16
RS-970025000222
RS-970025000411
RS-970025000421
DN 25
(1)
PN 25/40
St
SS
RS-970075000411
DN80
RS-970025000711
ASA 150
St
RS-970075000711
(3)
RS-970025000811
ASA 300
St
RS-970075000811
ASA 300
St
St
RS-970100000211
PN 10/16
St
SS/St
RS-970100000411
DN 100
PN 25/40
St
SS
RS-970100000711
(4)
ASA 150
St
St
RS-970100000811
ASA 300
St
RS-970025000422
RS-970032000211
PN 10/16
RS-970032000221
RS-970032000222
RS-970032000411
DN 32
RS-970032000421
(1.1/4)
PN 25/40
RS-970032000422
SS/St
SS
RS-970032000711
ASA 150
St
RS-970032000811
ASA 300
St
55

Fixed flange FSS
St (carbon steel),
to 160 bar,
From DN 65 - 64 bar (contact Technical
Material:
Characteristics: Fixed flange designed for steam rubber hoses. Assembled on the hose using clamps according
to DIN 2826.
code
size
RS-980013000210
flange
PN 10/16
RS-980013000220
RS-980013000410
DN 15
RS-980013000420
(1/2)
PN 25/40
material
code
size
St
RS-980038000210
SS
RS-980038000220
St
RS-980038000410
DN 40
SS
RS-980038000420
(1.1/2)
flange
PN 10/16
PN 25/40
RS-980013000710
ASA 150
St
RS-980038000710
ASA 150
RS-980013000810
ASA 300
St
RS-980038000810
ASA 300
St
RS-980050000210
SS
RS-980050000220
St
RS-980050000410
SS
RS-980050000420
RS-980019000210
PN 10/16
RS-980019000220
RS-980019000410
RS-980019000420
DN 20
(3/4)
PN 25/40
PN 10/16
DN 50
(2)
PN 25/40
material
St
SS
St
SS
St
St
St
SS
St
SS
RS-980019000710
ASA 150
St
RS-980050000710
ASA 150
RS-980019000810
ASA 300
St
RS-980050000810
ASA 300
St
St
RS-980065000210
PN 10/16
St
SS
RS-980065000410
DN 65
PN 25/40
St
St
RS-980065000710
(2.1/2)
ASA 150
St
SS
RS-980065000810
ASA 300
St
PN 10/16
St
DN80
PN 25/40
St
(3)
ASA 150
St
ASA 300
St
RS-980025000210
PN 10/16
RS-980025000220
RS-980025000410
RS-980025000420
DN 25
(1)
PN 25/40
RS-980025000710
ASA 150
St
RS-980075000210
RS-980025000810
ASA 300
St
RS-980075000410
St
RS-980075000710
SS
RS-980075000810
RS-980032000210
PN 10/16
RS-980032000220
RS-980032000410
DN32
RS-980032000420
(1.1/4)
PN 25/40
St
RS-980100000210
PN 10/16
St
SS
RS-980100000410
DN 100
PN 25/40
St
(4)
ASA 150
St
ASA 300
St
RS-980032000710
ASA 150
St
RS-980100000710
RS-980032000810
ASA 300
St
RS-980100000810
56
St

Safety clamps according to
DIN 2826 for VSS, MSS, FSS
Ms (cast brass)
Ms* (forged brass)
Working press.: 18 bar (+210C) - saturated steam,
for other application at ambient
temperature up to 160 bar (contact
Technical Department for advice)
Material:
Characteristics: Safety clamps are used for assembling VSS, MSS and FSS fittings on hoses. They are designed
especially for rubber steam hoses.
code
hose
I.D x W.T.
[mm]
D
min max
[mm]
material
RS-635013005030
13 x 5
22 24
Ms*
RS-635050009020
SS
RS-635050009030
RS-635013006020
bolts
hose
I.D x W.T.
[mm]
D
min max
[mm]
50 x 9
67 69
material
SS
24 26
RS-635050010030
50 x 10
69 71
Ms*
RS-635013007030
13 x 7
26 28
Ms*
RS-635050012030
50 x 12
73 76
Ms
RS-635019006030
19 x 6
30 33
Ms*
RS-635065010030
65 x 10
84 87
Ms
SS
RS-635065012030
65 x 12
88 91
Ms
Ms*
RS-635075010030
75 x 10
94 97
Ms
RS-635019007020
Ms*
19 x 7
32 34
RS-635019008030
19 x 8
34 36
Ms*
RS-635075012030
75 x 12
98 101
Ms
RS-635025007030
25 x 6,5
37 39
Ms*
RS-635075014030
75 x 14
102 105
Ms
25 x 7,5
39 41
100 x 8
114 119
RS-635025009030
25 x 8,5
RS-635032006030
32 x 6
RS-635019007030
RS-635025008020
RS-635025008030
RS-635032008020
RS-635032008030
RS-635038008020
RS-635038008030
RS-635038010030
SS
4 x M8x25
RS-637100008020
RS-637100008030
41 43
Ms*
RS-637100010030
100 x 10
118 122
Ms
43 46
Ms*
RS-637100012030
100 x 12
122 126
Ms
SS
RS-637100014030
100 x 14
126 130
Ms
Ms*
RS-637100016030
100 x 16
130 134
Ms
47 50
38 x 8
53 56
38 x 10
57 60
4 x M10x40
SS
Ms*
32 x 8
bolts
Ms*
13 x 6
RS-635013006030
4 x M6x20
code
Ms*
SS
Ms*
4 x M10x40
Ms*
DSG - steam jet cleaner

Stainless steel
To 10 bar (steam), to 15 bar (water)
+180C (steam), +120C (water)
3/4 BSP for hoses according
to ISO 6134
Nozzle connection: 3/4 BSP
Material:
Working press.:
Working temp.:
Hose connection:
RS-DSG
Characteristics: Jet cleaner designed for steam and hot water. An insulated handle and perforated housing
prevent accidental contact with hot metal parts. Widely used for cleaning in pharmaceutical,
food, cosmetic and chemical industry. Meets the requirements of the ATEX Directive concerning
the use in Ex zones - 1 and 2.
Extension fitting (600 mm), swivel joint for steam, dry-disconnect coupling type TD, variety of
Accessories:
nozzles on request.
57
INDUSTRIAL HOSES - food

Characteristics
Hoses designed to transfer foodstuffs must be made from materials which are approved to come into contact with
food. The internal layer of the hose is made from rubber compound, which is white, odourless and taste-free. It
may also be composed of PVC, polyethylene and other polymers that feature high level of purity, do not contain
dangerous substances or those deteriorating health and organoleptic characteristics of products. Various hose types
may be used to transfer such foodstuffs as drinking water, milk and dairy products, alcohol, fruit juices, beverages,
fats, oils etc. These hoses are also used in pharmaceutical and cosmetics industry.
Hose fittings (check COUPLINGS, VALVES & CLAMPS) should be mounted with the use of clips, worm drive
clamps, safety clamps or ferrules (crimped). For food hoses stainless steel fittings (AISI 316) with appropriate
surface roughness, should be used.
To find other hoses for these applications check the following groups: universal, PTFE, material handling
( for dry foodstuffs), ducting and ventilation, chemical and TYGON.
Legislation (European Union):
- Regulation No 1935/2004 (materials and articles intended to come into contact with food),
- Regulation No 2023/2006 (good manufacturing practice),
- Commission Directive 2002/72/EC and 2007/19/EC (plastic materials and articles intended to come into contact
with foodstuffs - do not apply to rubber and silicone).
These documents lay down general requirements but also specify the following:
- labelling, which must include clear indication that materials or articles are intended to come into contact with
food e.g. special application such as wine or milk transfer or have a glass and a fork symbol,
- list of approved substances,
- approved limits of quantity and migration of additional substances - constituents of plastic material to simulants
which act like particular types of food (hydrophilic, acidic, alcoholic, lipophilic or dry food). Particularly Directive
2007/19/EC prohibits the use of phthalates as plasticizers in PVC hoses. For these reasons plastic hoses must
be selected according to the type of foodstuff that is to be transferred.
American requirements (USA):
- FDA (Food and Drug Administration) - these requirements indicate materials and substances that may come into
contact with food. For example, compliance with FDA 21 CFR 177.2600 concerns rubber hoses, FDA 21 CFR
177.1550 concerns PTFE hoses; compliance with FDA means declaration of a manufacturer, the requirements
are recognized and acknowledged worldwide,
- NSF (NSF International) - compliance certificates for a complete product and its application; NSF-51 standard
concerns materials,
- USDA (US Department of Agriculture) - requirements for meat and poultry industry,
- 3-A - additional requirements for dairy industry.
Requirements for pharmaceutical industry, biotechnology and medicine:
- USP (US Pharmacopeia) - standards for materials used in pharmaceutical industry, biotechnology and medical
devices. USP Class VI is the highest requirement, includes testing on animals but may not be sufficient for
medical application,
- ISO 10993 - Biological evaluation of medical devices - procedures and requirements for medical devices,
depending on their category (non-invasive, invasive, implantable devices).
Drinking water regulations:
Drinking water and water supply installations (hoses included) usually must comply with special requirements
in different countries. The most common requirements are: KTW and DVGW (Germany), WRAS (Great Britain),
NSF-61 (USA), PZH in Poland which recognizes other UE certificates for drinking water.
58

Criteria for matching plastic hoses with different kind of foodstuff
The Regulation No 1935/2004 CE lays down the list of simulants which imitate the various food types. Meeting
the requirements of the Regulation (positive results on migration tests of a particular hose material against an
adequate simulant) means that the hose does not change the composition, chemical and organoleptic properties
of the foodstuff it conveys.
symbol
simulant
type of foodstuff
A
B
C
D
D (b)
distilled water
3% acetic acid
15% ethanol
rectified olive oil
50% ethanol
aqueous foodstuffs and non-alcoholic beverages

alcoholic beverages lower than 5%
alcoholic beverages equal to or exceeding 5%
fats and oils
milk and dairy products
CRISTALLO
Material: Soft transparent PVC
Characteristics: General purpose, flexible hose without reinforcement, designed to transfer water, beer, wine,
alcohol up to 28%, fruit juices, beverages and slightly aggressive chemicals. Not recommended
for food substances containing fat, oil nor dairy products. Meets the requirements of the
European Regulation 1935/2004 CE (simulants A, B and C). Also used as a protective cover
for pipes, wires etc.
code
I.D.
[mm]
O.D.
[mm]
ME-CRISTALLO-03/06
ME-CRISTALLO-04/06
ME-CRISTALLO-04/07
ME-CRISTALLO-05/08
ME-CRISTALLO-06/09
ME-CRISTALLO-07/10
ME-CRISTALLO-08/12
ME-CRISTALLO-10/14
ME-CRISTALLO-12/17
ME-CRISTALLO-13/19
ME-CRISTALLO-14/19
ME-CRISTALLO-16/22
ME-CRISTALLO-18/25
ME-CRISTALLO-20/27
ME-CRISTALLO-22/30
ME-CRISTALLO-25/34
ME-CRISTALLO-30/40
ME-CRISTALLO-35/45
ME-CRISTALLO-40/50
ME-CRISTALLO-50/60
3
4
4
5
6
7
8
10
12
13
14
16
18
20
22
25
30
35
40
50
6
6
7
8
9
10
12
14
17
19
19
22
25
27
30
34
40
45
50
60
wall
thickness
[mm]
1,5
1
1,5
1,5
1,5
1,5
2
2
2,5
3
2,5
3
3,5
3,5
4
4,5
5
5
5
5
weight
[kg/m]
0,03
0,02
0,03
0,04
0,05
0,05
0,08
0,10
0,14
0,19
0,16
0,22
0,29
0,32
0,40
0,50
0,68
0,76
0,90
1,20
standard
length
[m]
200
200
200
200
200
100
100
100
100
100
100
100
50
50
50
50
30
30
30
30
59

TRICOCLAIR AL
Material:
Transparent PVC
Reinforcement: Polyester reinforcement
Characteristics: Lightweight, very flexible delivery hose designed to transfer water, fruit juices, beverages, slightly
aggressive chemicals, etc. As the material of the hose is phthalate-free it is recommended for
milk and dairy products as well as alcohol up to 50% and temperature up to +40C. Not suitable
for food substances containing fat and oil. Meets the requirements of the European Regulation
1935/2004 CE and 2007/19/CE (simulants A, B, C and D(b)).
code
I.D.
[mm]
O.D.
[mm]
TR-TRICOCLAIR-04
TR-TRICOCLAIR-06
TR-TRICOCLAIR-07
TR-TRICOCLAIR-08
TR-TRICOCLAIR-09
TR-TRICOCLAIR-10
TR-TRICOCLAIR-12
TR-TRICOCLAIR-13
TR-TRICOCLAIR-15
TR-TRICOCLAIR-19
TR-TRICOCLAIR-20
TR-TRICOCLAIR-25
TR-TRICOCLAIR-30
TR-TRICOCLAIR-32
TR-TRICOCLAIR-38
TR-TRICOCLAIR-40
TR-TRICOCLAIR-50
4
6
7
8
9
10
12
13
15
19
20
25
30
32
38
40
50
8
12
13
14
15
16
19
20
23
27
28
34
41
42
48
52
64
working
pressure 20C
[bar]
27
20
20
20
20
20
20
20
20
20
20
16
13
12
12
10
9
bending
radius
[mm]
22
36
46
54
66
74
90
101
120
157
170
219
277
320
420
460
600
weight
[kg/m]
0,05
0,10
0,12
0,13
0,14
0,15
0,21
0,23
0,29
0,35
0,36
0,51
0,74
0,71
0,81
1,08
1,48
standard
length
[m]
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
TECHNOBEL AL SOFT
Internal layer:
Reinforcement:
External layer:
Working temp.:
White polyethylene
Black PVC + polyester reinforcement
Blue PVC
From -20C to +50C
Characteristics: Lightweight, very flexible delivery hose designed to transfer liquid and dry food products.
Manufactured according to FullSoft technology which assures increased flexibility and excellent
resistance to deformation while bending. As the material of the hose is phthalate-free it is
recommended for milk and dairy products as well as alcohol to 50% and temperature up to
+40C. Not suitable for food substances containing fat and oil. Meets the requirements of the
European Regulation 1935/2004 CE and 2007/19/CE (simulants A, B, C and D(b)).
code
I.D.
[mm]
O.D.
[mm]
TR-TECHNOBEL/AL-08
TR-TECHNOBEL/AL-09
TR-TECHNOBEL/AL-10
TR-TECHNOBEL/AL-13
TR-TECHNOBEL/AL-20
8
9
10
13
20
14
15
16
19,5
27,5
60
working
pressure 20C
[bar]
20
20
20
20
20
bending
radius
[mm]
55
60
60
90
180
weight
[kg/m]
0,12
0,13
0,15
0,20
0,35
standard
length
[m]
40
50
40
40
40

SPIRABEL SNTS
Material:
Transparent PVC
Characteristics: Lightweight, very flexible suction-delivery hose designed to transfer water, fruit juices, beverages,
slightly aggressive chemicals, etc. As the material of the hose is phthalate-free it is recommended
for milk and dairy products as well as alcohol up to 50% and temperature up to +40C. Not
suitable for food substances containing fat and oil. Meets the requirements of the European
Regulation 1935/2004 CE and 2007/19/CE (simulants A, B, C and D(b)).
code
I.D.
[mm]
TR-SPIRABEL-20
TR-SPIRABEL-25
TR-SPIRABEL-30
TR-SPIRABEL-32
TR-SPIRABEL-35
TR-SPIRABEL-38
TR-SPIRABEL-40
TR-SPIRABEL-45
TR-SPIRABEL-50
TR-SPIRABEL-55
TR-SPIRABEL-60
TR-SPIRABEL-63
TR-SPIRABEL-70
20
25
30
32
35
38
40
45
50
55
60
63
70
wall
thickness
[mm]
2,6
2,7
2,7
2,8
3
3
3
3,1
3,3
3,3
3,3
3,3
3,4
working
press. 20C
[bar]
7
7
6
6
6
6
6
5
5
5
5
5
4
vacuum
[bar]
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,7
bending
radius
[mm]
60
75
90
95
105
115
120
135
150
165
180
190
210
standard
length
[m]
25
25
25
25
25
25
25
25
25
25
25
25
25
weight
[kg/m]
0,25
0,31
0,37
0,40
0,48
0,51
0,53
0,62
0,75
0,80
0,89
0,97
1,06
HELIFLEX NON TOXIC AS

Material:
Transparent PVC
Reinforcement: Gray PVC wire helix
Working temp.: From 0C to +60C
Characteristics: Lightweight, flexible suction-delivery hose designed to transfer water, beer, wine, alcohol up
to 28%, fruit juices, beverages and slightly aggressive chemicals. Not recommended for food
substances containing fat, oil nor for dairy products. Meets the requirements of the European
Directive 90/128 CE (simulants A, B and C). Longitudinal antistatic wire is fixed on the external
layer of the hose. Working pressure is 25% of bursting pressure.
code
I.D.
[mm]
PR-HF12102-025
PR-HF12102-032
PR-HF12102-038
PR-HF12102-040
PR-HF12102-051
PR-HF12102-060
PR-HF12102-065
PR-HF12102-075
PR-HF12102-102
25
32
38
40
51
60
65
75
102
wall
thickness
[mm]
3,8
3,9
4,0
4,1
4,4
4,7
4,9
5,1
5,9
bending
radius
[mm]
120
160
200
200
250
320
350
440
620
bursting
pressure 20C
[bar]
28
24
22
22
20
18
16
14
12
weight
[kg/m]
0,41
0,51
0,61
0,63
0,88
1,01
1,15
1,54
2,25
standard
length
[m]
50
50
50
50
50
50
50
50
50
61
LUISIANA
Material:
Transparent PVC \
Regulation 1935/2004 CE (simulants A, B and C). Version with antistatic wire also available.
code
I.D.
[mm]
ME-LUISIA-020
ME-LUISIA-025
ME-LUISIA-030
ME-LUISIA-032
ME-LUISIA-035
ME-LUISIA-038
ME-LUISIA-040
ME-LUISIA-045
ME-LUISIA-050
ME-LUISIA-060
ME-LUISIA-063
ME-LUISIA-070
ME-LUISIA-075
ME-LUISIA-080
ME-LUISIA-090
ME-LUISIA-100
ME-LUISIA-102
ME-LUISIA-110
ME-LUISIA-120
ME-LUISIA-125
ME-LUISIA-150
ME-LUISIA-200
20
25
30
32
35
38
40
45
50
60
63
70
75
80
90
100
102
110
120
125
150
200
wall
thickness
[mm]
3,1
3,3
3,5
3,6
3,4
3,7
3,8
3,7
4,1
4,5
4,0
4,6
5,2
5,3
5,2
6,0
6,2
6,0
6,2
6,3
7,2
9,1
working
press. 20C
[bar]
8
8
7
7
7
6,5
6,5
6,5
6
5
5
4
4
4
4
4
4
4
3
3
3
2
vacuum
[bar]
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,5
0,5
0,5
0,5
0,5
bending
radius
[mm]
75
120
140
150
160
170
180
200
220
270
290
320
350
360
430
480
480
530
680
730
810
900
weight
[kg/m]
0,28
0,33
0,42
0,46
0,50
0,55
0,61
0,67
0,81
0,97
1,04
1,20
1,38
1,56
1,80
2,16
2,20
2,40
2,85
3,13
4,25
6,40
PROVIDING COMPLETE HOSE SOLUTIONS !!!

We can supply complete hose assemblies.
You just need to provide hose diameter, complete length
and type of fittings.
62
standard
length
[m]
50
50
50
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
10
NEVADA
Material:
Transparent PVC
Regulation 1935/2004 CE (simulants A, B and C).
code
I.D.
[mm]
ME-NEVADA-025
ME-NEVADA-030
ME-NEVADA-032
ME-NEVADA-035
ME-NEVADA-038
ME-NEVADA-040
ME-NEVADA-045
ME-NEVADA-050
ME-NEVADA-060
ME-NEVADA-063
ME-NEVADA-070
ME-NEVADA-075
ME-NEVADA-080
ME-NEVADA-090
ME-NEVADA-100
ME-NEVADA-102
ME-NEVADA-110
ME-NEVADA-120
ME-NEVADA-125
ME-NEVADA-150
25
30
32
35
38
40
45
50
60
63
70
75
80
90
100
102
110
120
125
150
wall
thickness
[mm]
3,8
3,8
4
4
4,2
4,5
4,5
4,5
5,5
6
6
6
6,5
7
8
8
8
8
8,5
10
working
press. 20C
[bar]
8
8
8
8
8
8
8
8
7
7
6
6
5
5
4
4
4
4
4
3
vacuum
[bar]
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
bending
radius
[mm]
175
210
220
240
250
260
290
325
380
400
450
490
530
600
700
700
800
900
980
1350
weight
[kg/m]
0,40
0,50
0,52
0,60
0,70
0,75
0,90
1,00
1,45
1,67
1,80
1,90
2,20
2,48
3,30
3,30
3,45
3,60
4,20
6,30
standard
length
[m]
50
50
50
50
50
50
50
50
50
50
50
50
50
30
30
30
30
30
30
30
63
ARMORVIN PRESS
Material:
Transparent PVC
Characteristics: Robust, very flexible suction-delivery hose designed to transfer air, water, slightly aggressive
chemicals, beer, wine, alcohol up to 28%, fruit juices, beverages, drinking water, other liquid
and semi-liquid food substances. Not recommended for food substances containing fat, oil
nor for dairy products. Meets the requirements of the European Regulation 1935/2004 CE
(simulants A, B and C).
code
I.D.
[mm]
ME-ARMPRE-05
ME-ARMPRE-06
ME-ARMPRE-08
ME-ARMPRE-10
ME-ARMPRE-12
ME-ARMPRE-14
ME-ARMPRE-16
ME-ARMPRE-18
ME-ARMPRE-20
5
6
8
10
12
14
16
18
20
wall
thickness
[mm]
2,5
2,5
2,7
3
3
3,2
3,5
3,5
3,5
working
press. 20C
[bar]
20
18
16
15
15
12
12
10
10
vacuum
[bar]
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
bending
radius
[mm]
20
23
32
40
45
56
63
70
80
weight
[kg/m]
0,08
0,10
0,14
0,18
0,21
0,26
0,29
0,34
0,37
standard
length
[m]
60
60
60
60
60
60
60
60
60
ARMORVIN HNA
Material:
Transparent PVC
Characteristics: Very flexible suction-delivery hose designed to transfer air, water, beer, wine, alcohol up to
28%, fruit juices, beverages and slightly aggressive chemicals. Not recommended for food
Regulation 1935/2004 CE (simulants A, B and C).
64
code
I.D.
[mm]
ME-ARMHNA-010
ME-ARMHNA-012
ME-ARMHNA-014
ME-ARMHNA-016
ME-ARMHNA-018
ME-ARMHNA-020
ME-ARMHNA-022
ME-ARMHNA-025
ME-ARMHNA-030
ME-ARMHNA-032
ME-ARMHNA-035
ME-ARMHNA-038
ME-ARMHNA-040
ME-ARMHNA-045
ME-ARMHNA-050
ME-ARMHNA-060
ME-ARMHNA-075
ME-ARMHNA-080
ME-ARMHNA-100
10
12
14
16
18
20
22
25
30
32
35
38
40
45
50
60
75
80
100
wall
thickness
[mm]
3
3
3,2
3,2
3,2
3,4
3,6
4
4,2
4,2
4,5
4,5
4,7
5
5
6
6,8
7
7
working
press. 20C
[bar]
7
7
6
6
6
5
5
5
4,5
4,5
4
4
3
3
3
2,5
2
2
2
vacuum
[bar]
0,85
0,85
0,85
0,85
0,85
0,85
0,85
0,85
0,85
0,85
0,85
0,85
0,85
0,8
0,8
0,8
0,7
0,7
0,7
bending
radius
[mm]
20
25
30
35
40
50
55
60
70
75
80
90
95
110
125
140
200
220
300
weight
[kg/m]
0,16
0,18
0,20
0,23
0,28
0,34
0,36
0,51
0,60
0,65
0,73
0,80
0,87
1,10
1,20
1,80
2,50
2,70
3,25
standard
length
[m]
60
60
60
60
60
60
60
60
60
60
60
30
30
30
30
30
30
30
30
ARMORVIN HNP
Material:
Light green, transparent PVC
Characteristics: Very flexible suction-delivery hose designed to transfer air, water, beer, wine, alcohol up to 28%,
fruit juices, beverages and slightly aggressive chemicals. Not recommended for food substances
containing fat, oil nor for dairy products. Meets the requirements of the European Regulation
1935/2004 CE (simulants A, B and C). It is suitable for vacuum transfer of loose substances,
granulated products and many other slightly abrasive materials.
code
I.D.
[mm]
ME-ARMHNP-010
ME-ARMHNP-012
ME-ARMHNP-014
ME-ARMHNP-016
ME-ARMHNP-018
ME-ARMHNP-020
ME-ARMHNP-022
ME-ARMHNP-025
ME-ARMHNP-030
ME-ARMHNP-032
ME-ARMHNP-035
ME-ARMHNP-038
ME-ARMHNP-040
ME-ARMHNP-045
ME-ARMHNP-050
ME-ARMHNP-060
ME-ARMHNP-063
ME-ARMHNP-070
ME-ARMHNP-075
ME-ARMHNP-080
ME-ARMHNP-090
ME-ARMHNP-100
ME-ARMHNP-105
ME-ARMHNP-110
ME-ARMHNP-120
ME-ARMHNP-125
ME-ARMHNP-150
10
12
14
16
18
20
22
25
30
32
35
38
40
45
50
60
63
70
75
80
90
100
105
110
120
125
150
wall
thickness
[mm]
3
3
3
3
3,2
3,5
3,5
4
4,7
4,7
4,5
5,5
6,5
6,5
7
7
7
8
8
8
8,5
9
8,5
9
9
9,5
9,5
working
press. 20C
[bar]
8
8
8
8
7
7
6
6
5
5
5
5
5
5
5
5
4
4
4
3
3
3
3
3
2
2
2
vacuum
[bar]
0,95
0,95
0,95
0,95
0,95
0,95
0,95
0,95
0,95
0,95
0,95
0,95
0,95
0,95
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
bending
radius
[mm]
20
25
30
35
40
50
55
60
70
75
80
90
100
110
125
140
150
180
200
220
260
300
310
320
340
350
450
weight
[kg/m]
0,16
0,18
0,20
0,23
0,28
0,34
0,36
0,51
0,68
0,73
0,73
0,95
1,22
1,40
1,60
2,05
2,25
2,60
2,85
3,15
3,75
4,40
3,90
4,65
5,20
5,40
7,20
standard
length
[m]
60
60
60
60
60
60
60
60
60
60
60
30
30
30
30
30
30
30
30
30
30
30
20
20
20
20
20
65
VACUPRESS CRISTAL
Internal layer:
Reinforcement:
External layer:
Working temp.:
Transparent PVC
Steel wire helix, polyester cord
Transparent PVC
From -5C to +65C
Characteristics: Heavy duty, flexible, suction-delivery hose resistant to abrasion (according to DIN 53516:
90 mm3). Designed to transfer water, beer, wine, alcohol to 28%, fruit juices, beverages
and slightly aggressive chemicals. Not recommended for food substances containing fat, oil
nor for dairy products. Meets the requirements of the European Regulation 1935/2004 CE
(simulants A, B and C).
code
I.D.
[mm]
O.D.
[mm]
vacuum
[bar]
ME-VACUPRCR-019
ME-VACUPRCR-025
ME-VACUPRCR-030
ME-VACUPRCR-032
ME-VACUPRCR-035
ME-VACUPRCR-038
ME-VACUPRCR-040
ME-VACUPRCR-045
ME-VACUPRCR-050
ME-VACUPRCR-060
ME-VACUPRCR-063
ME-VACUPRCR-076
ME-VACUPRCR-080
ME-VACUPRCR-090
ME-VACUPRCR-102
19
25
30
32
35
38
40
45
50
60
63
76
80
90
102
28
35,5
40,5
42,5
48
51
53
58
63
74
77
92
96
106,5
119
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
working
press. 20C
[bar]
20
20
16
16
14
14
14
14
14
12
12
12
10
10
10
bursting
press. 20C
[bar]
60
60
48
48
42
42
42
42
42
36
36
36
30
30
30
bending
radius
[mm]
80
90
105
110
125
135
140
155
170
200
210
250
300
350
400
weight
[kg/m]
0,45
0,64
0,77
0,80
1,10
1,15
1,20
1,40
1,60
1,98
2,05
2,80
2,85
3,30
3,90
standard
length
[m]
60
60
60
60
60
30
30
30
30
30
30
30
30
30
30
PROFILINE AQUA PLUS

Internal layer:
Reinforcement:
External layer:
Working temp.:
XLPE polyethylene
Synthetic braid
Blue PE polyethylene
From -15C to +50C
Characteristics: Very flexible delivery hose designed to transfer food substances. As the material of the hose
is phthalate-free it is recommended for milk and dairy products as well as alcohol. Meets the
requirements of the European Regulation 1935/2004 CE and 2007/19/CE (simulants A, B, C
and D(b)).Widely used in food industry, drinking water applications and chemical industry.
code
I.D.
[mm]
O.D.
[mm]
TR-PROFIAQUAPLUS-10
TR-PROFIAQUAPLUS-13
TR-PROFIAQUAPLUS-19
TR-PROFIAQUAPLUS-25
10
13
19
25
15
20
27
34,5
66
working
pressure
[bar]
20
20
20
20
bending
radius
[mm]
70
140
215
295
weight
[kg/m]
0,09
0,17
0,26
0,42
standard
length
[m]
50
50
50
50
AQUAFIT
Internal layer: Black thermoplastic compound
Reinforcement: Synthetic braid
External layer: Blue, smooth non-staining
thermoplastic compound
Characteristics: Delivery hose designed to transfer drinking water, beer, wine, alcohol to 28%, fruit juices,
beverages and slightly aggressive chemicals. Not recommended for food substances containing
fat, oil nor for dairy products. Meets the requirements of the European Regulation 1935/2004
CE (simulants A, B and C). To be cleaned with warm water only at temperature up to +70C.
code
I.D.
[mm]
BG-4102010016
BG-4102013020
BG-4102019027
BG-4102025034
10
13
19
25
wall
thickness
[mm]
3
3,5
4
4,5
O.D.
[mm]
16
20
27
34
working
pressure
[bar]
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
standard
length
[m]
40
40
40
40
AQUABLUE
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth plastomer

Synthetic cord
Blue, smooth synthetic rubber
From -30C to +60C
Characteristics: Delivery hose designed to transfer drinking water. Food quality of the material used in its internal
layer ensures the absence of any impurities in water (complies with FDA 21 CFR 177.1520 and
with KTW-C). To be cleaned with steam (+130C) for 15 minutes.
code
I.D.
[mm]
O.D.
[mm]
IV-AQUABLUE-13
IV-AQUABLUE-19
IV-AQUABLUE-25
13
19
25
21
28
34
working
pressure
[bar]
20
20
20
bursting
pressure
[bar]
60
60
60
weight
[kg/m]
0,26
0,42
0,52
standard
length
[m]
60
60
60
67
SCOTLAND NR
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth NR rubber

Synthetic cord
Blue synthetic rubber
From -25C to +80C (for steam
cleaning at +100C for 2 3 min.)
Characteristics: Delivery hose designed to transfer food substances which demand application of taste-free
and odourless rubber (complies with FDA 21 CFR 177.2600 and BfR XXI cat.2). Highly
recommended for milk and dairy products transfer.
code
I.D.
[mm]
O.D.
[mm]
IV-SCOT/NR-019
IV-SCOT/NR-025
IV-SCOT/NR-032
IV-SCOT/NR-038
IV-SCOT/NR-051
IV-SCOT/NR-063
IV-SCOT/NR-076
19
25
32
38
51
63,5
76
27
34
42
48
61
75,5
88
working
pressure
[bar]
6
6
6
6
6
6
6
bursting
pressure
[bar]
18
18
18
18
18
18
18
weight
[kg/m]
0,34
0,51
0,73
0,85
1,11
1,61
1,92
standard
length
[m]
60
60
60
60
60
60
60
SCOTLAND / LL NR
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth NR rubber

Synthetic cord, steel wire helix
cleaning at +100C for 2 3 min.)
Characteristics: Suction-delivery hose designed to transfer food substances which demand application of tastefree and odourless rubber (complies with FDA 21 CFR 177.2600 and BfR XXI cat.2). Highly
recommended for milk and dairy products transfer.
code
I.D.
[mm]
O.D.
[mm]
IV-SCOT/LL/NR-019
IV-SCOT/LL/NR-025
IV-SCOT/LL/NR-032
IV-SCOT/LL/NR-038
IV-SCOT/LL/NR-040
IV-SCOT/LL/NR-051
IV-SCOT/LL/NR-063
IV-SCOT/LL/NR-076
IV-SCOT/LL/NR-080
19
25
32
38
40
51
63,5
76
80
30
36
43
49
51
62
76,5
88
94
68
working
pressure
[bar]
6
6
6
6
6
6
6
6
6
bursting
pressure
[bar]
18
18
18
18
18
18
18
18
18
bending
radius
[mm]
60
70
80
100
120
150
240
300
330
weight
[kg/m]
0,67
0,86
1,05
1,21
1,27
1,65
2,34
2,63
2,80
standard
length
[m]
60
60
60
60
60
60
60
60
60
MASTERMILK / SD
White, smooth NBR rubber
cleaning up to +130C max. 30 min.)
Internal layer:
Reinforcement:
External layer:
Working temp.:
Characteristics: Suction-delivery hose designed to transfer food products which demand application of tastefree and odourless rubber. Complies with FDA standards and recommendations of BfR, M.D.
21/03/73 and RAL. The material of the hose is phthalate-free, does not contain plasticizers or
animal derivatives so it reduces the risk of bacteria proliferation and contamination or emergence
of impurities. The internal layer is resistant to cleaning products and systems used in food
industry. The external layer is resistant to ageing, weather conditions and accidental contact
with animal fats and vegetable oils. Particularly recommended for applications which demand
high flexibility and small bending radius.
code
I.D.
[mm]
MT-MASTERMILK/SD-019
19
25
32
38
40
45
50
65
75
100
wall
thickness
[mm]
5,5
5,5
5,5
6
6
6
6
6,5
7
7,5
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
30
30
30
30
min. bending
radius
[mm]
50
75
80
110
120
130
150
190
220
500
weight
[kg/m]
0,60
0,74
0,90
1,20
1,25
1,50
1,55
2,20
2,55
4,25
standard
length
[m]
40
40
40
40
40
40
40
40
40
40
VINOFLEX
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth IIR rubber

Red thermoplastic compound
From -40C to +120C
Characteristics: Suction-delivery hose designed to transfer wine and alcohols to 96% (complies with FDA 21 CFR
177.2600 and BfR XXI cat.2). Its internal layer is odourless and taste-free. Low coefficient of
friction of the external layer facilitates hose handling. Sterilization for a few minutes: with steam
at +130C; +60C 2% nitric acid, 2% peracetic acid, 2% phosphoric acid, 5% caustic soda.
code
I.D.
[mm]
IV-VINOFLEX-040
IV-VINOFLEX-051
IV-VINOFLEX-060
IV-VINOFLEX-063
IV-VINOFLEX-070
IV-VINOFLEX-076
IV-VINOFLEX-080
IV-VINOFLEX-100
40
51
60
63,5
70
76
80
100
working
pressure
[bar]
8
8
7
7
6
6
5
4
bursting
pressure
[bar]
24
24
21
21
18
18
15
12
bending
radius
[mm]
120
150
180
195
210
225
240
350
vacuum
[bar]
weight
[kg/m]
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
1,17
1,45
1,76
1,85
2,12
2,29
2,40
3,03
standard
length
[m]
60
60
60
60
60
60
60
60
69
SCOTLAND BE
Internal layer:
Reinforcement:
External layer:
Working temp.:

Synthetic cord
Red butyl rubber
From -40C to +120C
Characteristics: Delivery hose designed to transfer food products which demand application of taste-free and
odourless rubber (complies with FDA 21 CFR 177.2600 and BfR XXI cat.2). Widely used in
distillery industry to transfer alcohol to 96%. The hose features copper wires to ensure electrical
conductivity. For pressure steam cleaning at temp. +120C for max. 30 min.
code
I.D.
[mm]
O.D.
[mm]
IV-SCOT/BE-019
IV-SCOT/BE-025
IV-SCOT/BE-032
IV-SCOT/BE-038
IV-SCOT/BE-051
IV-SCOT/BE-063
IV-SCOT/BE-076
IV-SCOT/BE-102
19
25
32
38
51
63,5
76
102
29
38
48
56
69
83,5
96
124
working
pressure
[bar]
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
30
30
weight
[kg/m]
0,48
0,81
1,25
1,66
2,13
2,87
3,19
4,86
standard
length
[m]
60
60
60
60
60
60
60
60
SCOTLAND / LL BE
Internal layer:
Reinforcement:
External layer:
Working temp.:

Red butyl rubber
From -40C to +120C
Characteristics: Suction-delivery hose designed to transfer food products which demand application of tastefree and odourless rubber (complies with FDA 21 CFR 177.2600 and BfR XXI cat.2). Widely
used in distillery industry to transfer alcohol to 96%. The hose features copper wires to ensure
electrical conductivity. For pressure steam cleaning at temp. +120C for max. 30 min.
code
I.D.
[mm]
O.D.
[mm]
IV-SCOT/LL/BE-019
IV-SCOT/LL/BE-025
IV-SCOT/LL/BE-032
IV-SCOT/LL/BE-038
IV-SCOT/LL/BE-051
IV-SCOT/LL/BE-063
IV-SCOT/LL/BE-076
IV-SCOT/LL/BE-102
19
25
32
38
51
63,5
76
102
32
38
46
52
65
80
93
120
70
working
pressure
[bar]
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
30
30
bending
radius
[mm]
115
125
175
220
300
430
530
760
weight
[kg/m]
0,89
0,90
1,19
1,45
1,91
2,83
3,46
4,90
standard
length
[m]
60
60
60
60
60
60
60
60

PANAMA
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth PVC/NBR rubber

Synthetic cord
Blue CR rubber
cleaning at +130C for max. 30 min.
in an open system)
Characteristics: Delivery hose designed to transfer food products which demand application of taste-free and
odourless rubber (complies with FDA 21 CFR 177.2600). Particularly recommended for transfer
of oil, fat, beer, wine, drinking water, etc.
code
I.D.
[mm]
O.D.
[mm]
IV-PANAMA-019
IV-PANAMA-025
IV-PANAMA-032
IV-PANAMA-038
IV-PANAMA-051
IV-PANAMA-063
IV-PANAMA-076
IV-PANAMA-102
19
25
32
38
51
63,5
76
102
31
39
46
53
67
83,5
96
124
working
pressure
[bar]
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
30
30
weight
[kg/m]
0,66
1,01
1,23
1,55
2,11
3,42
4,04
5,61
standard
length
[m]
60
60
60
60
60
60
60
60
ACAPULCO
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth PVC/NBR rubber

Blue CR rubber
cleaning at +130C for max. 30 min.
in an open system)
Characteristics: Suction-delivery hose designed to transfer food products which demand application of tastefree and odourless rubber (complies with FDA 21 CFR 177.2600). Particularly recommended
for transfer of oil, fat, beer, wine, drinking water, etc.
code
I.D.
[mm]
O.D.
[mm]
IV-ACAPUL-032
IV-ACAPUL-038
IV-ACAPUL-051
IV-ACAPUL-063
IV-ACAPUL-076
IV-ACAPUL-102
32
38
51
63,5
76
102
44
52
67
79,5
94
122
working
pressure
[bar]
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
bending
radius
[mm]
175
220
300
430
530
760
weight
[kg/m]
1,18
1,63
2,46
3,07
4,13
6,25
standard
length
[m]
60
60
60
60
60
60
71

FOODFLEX
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth natural rubber

Blue EPDM rubber
From -25C to +80C (for detergent,
steam cleaning to +110C for 2 3 min.)
Characteristics: Very flexible, suction-delivery hose designed to transfer wine, beer, drinking water and fruit
juices (complies with FDA 21 CFR 177.2600 and BfR XXI cat. 2). Especially recommended for
milk and dairy products. Suitable for hose reels applications.
code
I.D.
[mm]
O.D.
[mm]
IV-FOODFLEX-025
IV-FOODFLEX-032
IV-FOODFLEX-038
IV-FOODFLEX-051
IV-FOODFLEX-063
IV-FOODFLEX-076
25
32
38
51
63,5
76
36
43
49,5
62,5
76,5
89,5
working
pressure
[bar]
6
6
6
6
6
6
bursting
pressure
[bar]
18
18
18
18
18
18
bending
radius
[mm]
50
64
76
102
127
152
weight
[kg/m]
0,72
0,88
1,18
1,52
2,16
2,65
standard
length
[m]
60
60
60
60
60
60
ALICHEM
Internal layer:
Reinforcement:
External layer:
Working temp.:

Synthetic cord
Green EPDM rubber
From -40C to +120C
(sterilization up to +140C for 30 min.)
Characteristics: Delivery hose designed to transfer liquid food products such as wine, fruit juices, beer, drinking
water, milk and dairy products (complies with FDA 21 CFR 177.2600 and BfR XXI cat. 2). Suitable
for all cleaning and disinfection processes commonly used in food industry.
72
code
I.D.
[mm]
O.D.
[mm]
MT-ALICHEM-019
MT-ALICHEM-025
MT-ALICHEM-032
MT-ALICHEM-038
MT-ALICHEM-050
MT-ALICHEM-065
MT-ALICHEM-075
MT-ALICHEM-100
19
25
32
38
50
65
75
100
31
37
48
56
72
93
105
132
working
pressure
[bar]
15
15
15
15
15
15
15
15
bursting
pressure
[bar]
45
45
45
45
45
45
45
45
vacuum
[bar]
0,6
0,6
0,6
0,6
0,5
0,5
0,4
0,4
bending
radius
[mm]
120
150
250
280
400
520
600
800
weight
[kg/m]
0,53
0,66
1,10
1,50
2,45
3,90
4,76
6,60
standard
length
[m]
40
40
40
40
40
40
40
40

SUPERTOP / LL FOOD UPE
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth UPE polyethylene

Blue EPDM rubber
From -20C to +100C
Characteristics: Suction-delivery hose designed to transfer liquid chemicals. Widely used in food, chemical and
petrochemical industry. The hose features copper wires to ensure electrical conductivity. The
external layer is resistant to weather conditions and abrasion. Meets the requirements of FDA
21 CFR 177.1520.
code
I.D.
[mm]
O.D.
[mm]
IV-SUPUPE/LL/F-019
IV-SUPUPE/LL/F-025
IV-SUPUPE/LL/F-038
IV-SUPUPE/LL/F-051
IV-SUPUPE/LL/F-063
IV-SUPUPE/LL/F-076
19
25
38
51
63,5
76
32
37
52,5
66
79
91
working
pressure
[bar]
10
10
10
10
10
10
bursting
pressure
[bar]
40
40
40
40
40
40
bending
radius
[mm]
115
155
250
350
450
545
weight
[kg/m]
0,77
0,98
1,62
2,22
2,74
3,16
standard
length
[m]
60
60
60
60
60
60
PHARMAFLON
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, mirrorlike MFA polymer

From -40C to +170C
Characteristics: Suction-delivery hose designed to transfer pharmaceutical, cosmetic, chemical and food products
( the internal layer complies with FDA 21 CFR 177.1550, the external layer complies with FDA 21
CFR 177.2600 e). The hose features copper wires to ensure electrical conductivity. Excellent
resistance to high temperature and mechanical impact.
code
I.D.
[mm]
MT-PHARMA-13
MT-PHARMA-19
MT-PHARMA-25
MT-PHARMA-32
MT-PHARMA-38
MT-PHARMA-51
MT-PHARMA-63
MT-PHARMA-76
13
19
25
32
38
51
63,5
76
wall
thickness
[mm]
6
6
6
6,5
6,5
7,25
8
8
bending
radius
[mm]
60
90
140
200
250
300
380
500
working
pressure
[bar]
10
10
10
10
10
10
10
10
weight
[kg/m]
0,55
0,72
0,89
1,16
1,47
2,08
2,80
3,48
max.
length
[m]
20
20
20
20
20
20
20
20
73
INDUSTRIAL HOSES - chemical
MP 20
Internal layer:
Reinforcement:
External layer:
Working temp.:
Characteristics:
Black, smooth EPDM compound

Two or four textile braids
Black, smooth EPDM compound
From -40C to +95C
Multi-purpose hose designed to convey polyurethane or epoxy mild chemicals. Recommended

for waterborne paints. Not suitable for chlorinated rubber paints and aromatic solvents. Antistatic
- R<106 .
code
I.D.
[mm]
O.D.
[mm]
SP-MP20-06
SP-MP20-08
SP-MP20-10
SP-MP20-13
SP-MP20-16
SP-MP20-19
SP-MP20-25
SP-MP20-32
SP-MP20-38
6
8
10
13
16
19
25
32
38
13
15
17
21
24
28
35
44
50
working
pressure
[bar]
20
20
20
20
20
20
20
20
20
bursting
pressure
[bar]
80
80
80
80
80
80
80
80
80
bending
radius
[mm]
72
96
120
156
192
228
300
384
456
weight
[kg/m]
0,13
0,18
0,21
0,25
0,31
0,42
0,61
0,95
1,19
standard
length
[m]
100
100
100
100
100
50
50
50
50
MPX 20
Internal layer:
Reinforcement:
External layer:
Working temp.:
Characteristics:
74

Polyester cord
From -40C to +95C
A cost-efficient version of a multi-purpose hose designed to convey polyurethane or epoxy mild

chemicals. Recommended for waterborne paints. Not suitable for chlorinated rubber paints
and aromatic solvents. The internal and external layer is antistatic - R<106 .
code
I.D.
[mm]
O.D.
[mm]
PR-MPX20-06
PR-MPX20-08
PR-MPX20-10
PR-MPX20-13
PR-MPX20-16
PR-MPX20-19
PR-MPX20-25
PR-MPX20-32
PR-MPX20-38
6
8
10
13
16
19
25
32
38
13
15
17
21
24
28
35
44
53
working
pressure
[bar]
20
20
20
20
20
20
20
20
20
bursting
pressure
[bar]
80
80
80
80
80
80
80
80
80
bending
radius
[mm]
72
96
120
156
192
228
300
384
456
weight
[kg/m]
0,17
0,20
0,24
0,34
0,40
0,53
0,75
1,14
1,71
standard
length
[m]
100
100
100
100
100
100
100
60
60
NR SPRAY
Internal layer:
Reinforcement:
External layer:
Working temp.:
Polyamide (silicone-free)
Textile braid
Black synthetic rubber
From -20C to +90C
Characteristics: Delivery hose designed to transfer paints, lacquers, solvents, turpentine, air, oil and a variety
of chemicals. Besides numerous other applications it is widely used in automotive industry for
spray painting. Safety factor 4:1.
code
I.D.
[mm]
O.D.
[mm]
GY-NRSPRAY-06
GY-NRSPRAY-10
GY-NRSPRAY-13
GY-NRSPRAY-16
GY-NRSPRAY-19
GY-NRSPRAY-25
6,4
9,5
12,7
15,9
19,1
25,4
12,4
17,8
22,1
26,7
30,2
38,4
bending
radius
[mm]
50
75
100
130
175
225
working
pressure
[bar]
50
50
50
50
50
50
standard
length
[m]
152,5
152,5
152,5
152,5
152,5
152,5
weight
[kg/m]
0,12
0,22
0,33
0,46
0,54
0,80
VACUPRESS CHEM
Internal layer:
Reinforcement:
External layer:
Working temp.:
Santoprene thermoplastic rubber

Steel wire helix, polyester yarn
Santoprene thermoplastic rubber
From -25C to +80C (while cleaning
with peaks up to +110C for a moment)
Characteristics: Very lightweight, flexible suction-delivery hose designed to transfer chemicals. Resistant to
detergents, weather conditions and abrasion according to DIN 53516:150 mm3. Smooth internal
and external layers ensure the highest degree of cleanliness. Recommended for tank trucks
and loading/reloading stations. A version with polyethylene inlay that extends the chemical
resistance of the hose is also available (VACUPRESS SUPER CHEMI - diameter up to 63 mm).
code
I.D.
[mm]
O.D.
[mm]
vacuum
[bar]
ME-VACUPRCH-019
ME-VACUPRCH-025
ME-VACUPRCH-030
ME-VACUPRCH-032
ME-VACUPRCH-035
ME-VACUPRCH-038
ME-VACUPRCH-040
ME-VACUPRCH-045
ME-VACUPRCH-050
ME-VACUPRCH-060
ME-VACUPRCH-063
ME-VACUPRCH-076
ME-VACUPRCH-080
ME-VACUPRCH-090
ME-VACUPRCH-102
19
25
30
32
35
38
40
45
50
60
63
76
80
90
102
28
35,5
40,5
42,5
47
50
52
57
63
73
76
91
95
106
118
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
working
bursting
[bar]
[bar]
15
45
14
42
10
30
10
30
10
30
10
30
10
30
10
30
10
30
9
27
9
27
8
24
8
24
8
24
7
21
bending
radius
[mm]
70
80
85
90
95
100
110
120
130
160
180
230
250
280
310
weight
[kg/m]
0,38
0,58
0,65
0,70
0,85
0,92
0,97
1,10
1,28
1,55
1,60
2,35
2,40
2,75
3,10
standard
length
[m]
60
60
60
60
60
30
30
30
30
30
30
30
30
30
30
75

SUPERTOP UPE
Internal layer:
Reinforcement:
External layer:
Working temp.:

Synthetic cord
Black EPDM rubber
From -20C to +100C
Characteristics: Delivery hose designed to convey liquid chemicals. Widely used in chemical and petrochemical
industry. The hose features copper wires to ensure electrical conductivity. The external layer
is resistant to abrasion and weather conditions.
Standards:
EN 12115.
code
I.D.
[mm]
O.D.
[mm]
IV-SUPUPE-013
IV-SUPUPE-019
IV-SUPUPE-025
IV-SUPUPE-032
IV-SUPUPE-038
IV-SUPUPE-051
IV-SUPUPE-063
IV-SUPUPE-076
IV-SUPUPE-102
13
19
25
32
38
51
63,5
76
102
25
31
37
45
52
67
79
92
118
working
pressure
[bar]
16
16
16
16
16
16
16
16
16
bursting
pressure
[bar]
64
64
64
64
64
64
64
64
64
weight
[kg/m]
0,40
0,54
0,67
0,86
1,11
1,63
2,07
2,99
4,71
standard
length
[m]
60
60
60
60
60
60
60
60
60
SUPERTOP / LL UPE
Internal layer:
Reinforcement:
External layer:
Working temp.:

Black EPDM rubber
From -20C to +100C
Characteristics: Suction-delivery hose designed to convey liquid chemicals. Widely used in chemical and
petrochemical industry. The hose features copper wires to ensure electrical conductivity. The
external layer is resistant to abrasion and weather conditions.
EN 12115.
Standards:
76
code
I.D.
[mm]
O.D.
[mm]
IV-SUPUPE/LL-019
IV-SUPUPE/LL-025
IV-SUPUPE/LL-032
IV-SUPUPE/LL-038
IV-SUPUPE/LL-051
IV-SUPUPE/LL-063
IV-SUPUPE/LL-076
IV-SUPUPE/LL-102
19
25
32
38
51
63,5
76
102
31
37
44
51
65
78
91
118
working
pressure
[bar]
16
16
16
16
16
16
16
16
bursting
pressure
[bar]
64
64
64
64
64
64
64
64
weight
[kg/m]
0,74
0,90
1,10
1,43
1,86
2,47
3,03
4,47
standard
length
[m]
60
60
60
60
60
60
60
60
ORLANDO
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth EPM rubber

Synthetic cord
Black EPM rubber
From -40C to +100C
Characteristics: Delivery hose designed to transfer acids, industrial alcohol, polluted water, sea water, etc. The
internal layer of the hose is antistatic.
code
I.D.
[mm]
O.D.
[mm]
IV-ORLANDO-019
IV-ORLANDO-025
IV-ORLANDO-032
IV-ORLANDO-038
IV-ORLANDO-051
IV-ORLANDO-063
IV-ORLANDO-076
IV-ORLANDO-102
IV-ORLANDO-125
19
25
32
38
51
63,5
76
102
125
29
35
42
50
64
80,5
92
121
141
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
40
40
40
40
40
40
40
40
40
weight
[kg/m]
0,56
0,70
0,93
1,11
1,71
2,40
2,84
3,64
4,63
standard
length
[m]
60
60
60
60
60
60
60
60
60
EVEREST
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth EPM rubber

Black EPM rubber
From -40C to +100C
Characteristics: Suction-delivery hose designed to transfer acids, industrial alcohol, polluted water, etc. The
internal layer of the hose is antistatic.
code
I.D.
[mm]
O.D.
[mm]
IV-EVEREST-025
IV-EVEREST-032
IV-EVEREST-038
IV-EVEREST-051
IV-EVEREST-063
IV-EVEREST-076
IV-EVEREST-102
25
32
38
51
63,5
76
102
38
46
52
68
81
95
122
working
pressure
[bar]
10
10
10
10
10
10
10
bursting
pressure
[bar]
40
40
40
40
40
40
40
bending
radius
[mm]
170
230
280
400
480
650
850
weight
[kg/m]
0,86
1,15
1,37
2,07
2,82
3,60
5,02
standard
length
[m]
60
60
60
60
60
60
60
77

REAL
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth Viton compound

Synthetic cord
From -25C to +120C
Characteristics: Delivery hose designed to convey highly aggressive chemicals, concentrated aromatic
compounds, hot oil in chemical and petrochemical industry. The external layer is resistant to
weather conditions, abrasion, ozone and oils.
code
I.D.
[mm]
O.D.
[mm]
IV-REAL-019
IV-REAL-025
IV-REAL-032
IV-REAL-038
IV-REAL-051
IV-REAL-063
IV-REAL-076
IV-REAL-102
19
25
32
38
51
63,5
76
102
31
38
46
54
68,5
81
95
121
working
pressure
[bar]
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
40
40
40
40
40
40
40
40
weight
[kg/m]
0,64
0,83
1,22
1,55
2,07
2,51
3,50
4,60
standard
length
[m]
60
60
60
60
60
60
60
60
PROVIDENCE
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth Viton compound

From -25C to +120C
Characteristics: Suction-delivery hose designed to convey highly aggressive chemicals, concentrated aromatic
compounds, hot oil in chemical and petrochemical industry. The external layer is resistant to
weather conditions, abrasion, ozone and oils.
78
code
I.D.
[mm]
O.D.
[mm]
IV-PROV-019
IV-PROV-025
IV-PROV-032
IV-PROV-038
IV-PROV-051
IV-PROV-063
IV-PROV-076
IV-PROV-102
19
25
32
38
51
63,5
76
102
30
36
46
52
68,5
81
95
122
working
pressure
[bar]
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
40
40
40
40
40
40
40
40
bending
radius
[mm]
130
170
230
280
400
480
650
850
weight
[kg/m]
0,70
0,99
1,46
1,63
2,77
3,08
4,00
6,00
standard
length
[m]
60
60
60
60
60
60
60
60

BROWN FLEXWING
Black Chemrin (CPE)
synthetic rubber
Reinforcement: Synthetic braid, steel wire helix
External layer: Brown Versigard
synthetic rubber
Internal layer:
Characteristics: Suction-delivery hose developed to transfer a wide range of chemicals (acids, bases), alcohols,
oil and petroleum products. Safety factor 4:1.
code
I.D.
[mm]
O.D.
[mm]
GY-BROWNFLEX-013
GY-BROWNFLEX-019
GY-BROWNFLEX-025
GY-BROWNFLEX-032
GY-BROWNFLEX-038
GY-BROWNFLEX-051
GY-BROWNFLEX-063
GY-BROWNFLEX-076
GY-BROWNFLEX-102
GY-BROWNFLEX-152
12,7
19,1
25,4
31,8
38,1
50,8
63,5
76,2
101,6
152,4
24,6
31,2
37,3
43,9
51,6
66,3
79
91,7
119,1
174,1
bending
radius
[mm]
152
178
203
229
254
305
381
457
610
900
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
10
vacuum
[bar]
weight
[kg/m]
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,46
0,65
0,80
0,98
1,37
1,96
2,46
3,01
4,39
9,04
standard
length
[m]
30,5
30,5
30,5
30,5
30,5
30,5
30,5
30,5
30,5
30,5
MANIFLON
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, mirrorlike MFA polymer

From -50C to +170C
Characteristics: Suction-delivery hose developed to convey aggressive chemicals. High resistance to thermal
and mechanical stress. Safety factor 4:1. The hose features copper wires to ensure electrical
conductivity. Antistatic - R<102. Meets the requirements of EN 12115 standard.
code
I.D.
[mm]
O.D.
[mm]
MT-MANIFLON-013
MT-MANIFLON-019
MT-MANIFLON-025
MT-MANIFLON-032
MT-MANIFLON-038
MT-MANIFLON-051
MT-MANIFLON-063
MT-MANIFLON-076
13
19
25
32
38
51
63,5
76
25
32
38
45
51
66
79,5
93
working
pressure
[bar]
16
16
16
16
16
16
16
16
bursting
pressure
[bar]
64
64
64
64
64
64
64
64
vacuum
[bar]
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
bending
radius
[mm]
80
115
150
190
230
300
390
500
standard
length
[m]
20
20
20
20
20
20
20
20
79

MANICHEM MARBLE
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black & white UPE polyethylene

From -35C to +100C
Characteristics: Suction-delivery hose developed to convey aggressive chemicals. Low coefficient of friction
during medium transfer. The internal layer is antistatic and compliant with FDA standards. The
external layer is antistatic (R<105), resistant to abrasion, ozone and weather conditions. It
ensures distribution of electrostatic charge through the hose wall (not only on the surface).
Steam cleaning at temp. +130C is permitted for a maximum of 30 min. Marked with Ex symbol
(intended for use in potentially explosive zones). Manufactured according to EN12115 and EN
50014/ IEC 60079-0.
code
I.D.
[mm]
O.D.
[mm]
MT-MANICHEM/M-006
MT-MANICHEM/M-008
MT-MANICHEM/M-010
MT-MANICHEM/M-013
MT-MANICHEM/M-016
MT-MANICHEM/M-019
MT-MANICHEM/M-025
MT-MANICHEM/M-032
MT-MANICHEM/M-038
MT-MANICHEM/M-050
MT-MANICHEM/M-065
MT-MANICHEM/M-075
MT-MANICHEM/M-100
MT-MANICHEM/M-125
MT-MANICHEM/M-150
6
8
10
13
16
19
25
32
38
50
63,5
75
100
125
150
16
20
23
23
28
31
37
44
51
66
79,5
91
118
146
174
working
pressure
[bar]
16
16
16
16
16
16
16
16
16
16
16
16
16
12
12
bursting
pressure
[bar]
64
64
64
64
64
64
64
64
64
64
64
64
48
36
36
vacuum
[bar]
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
bending
radius
[mm]
42
56
70
85
112
125
150
175
225
275
300
350
450
1000
1200
standard
length
[m]
40
40
40
40
40
40
40
40
40
40
40
40
40
20
20
DYNAMIC SAFE-TECH
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, mirrorlike PFA polymer

Smooth thermoplastic compound
From -40C to +130C
Characteristics: Suction-delivery hose developed to convey highly flammable chemicals. For application in
chemical, petrochemical and pharmaceutical industry, biotechnology and cosmetics. Fully
antistatic - R<105 , meets the requirements of EN 12115. FDA approved. Abrasion of the
external layer is compliant with ISO 6945 and SAE J 20006.
code
I.D.
[mm]
O.D.
[mm]
MT-DYNAMIC/ST-13
MT-DYNAMIC/ST-19
MT-DYNAMIC/ST-25
MT-DYNAMIC/ST-32
MT-DYNAMIC/ST-38
MT-DYNAMIC/ST-51
13
19
25
32
38
51
25
31
37
45
51
65,5
80
working
pressure
[bar]
10
10
10
10
10
10
bursting
pressure
[bar]
40
40
40
40
40
40
bending
radius
[mm]
60
90
140
200
250
300
weight
[kg/m]
0,55
0,72
0,89
1,16
1,47
2,08
standard
length
[m]
20
20
20
20
20
20
TEFLEX
Internal layer:
Reinforcement:
External layer:
Working temp.:
Smooth FEP
Orange, smooth syntetic rubber
From -40C to +150C
Characteristics: Suction- delivery hose designed to transfer a wide range of aggressive chemical products. Safety
factor 4:1. Designed to be cleaned using CIP method at +150C. External layer resistant to
ozone The hose features copper wires to ensure electrical conductivity. Meets the requirements
of EN12115 standard.
code
I.D.
[mm]
O.D.
[mm]
IV-TEFLEX-19
IV-TEFLEX-25
IV-TEFLEX-32
IV-TEFLEX-38
IV-TEFLEX-51
IV-TEFLEX-76
19
25
32
38
51
76
31,5
37,5
45
51,5
65,5
90
working
pressure
[bar]
16
16
16
16
16
16
vacuum
[bar]
0,9
0,9
0,9
0,9
0,9
0,8
bending
radius
[mm]
190
225
265
340
415
525
weight
[kg/m]
0,70
0,95
1,16
1,37
1,98
2,94
standard
length
[m]
20
20
20
20
20
20
We have qualifications to manufacture and repair hose assemblies used in loading/unloading applications.
We can prepare and later approve a complete documentation for reloading hose assemblies
in Transportation Technical Supervision Inspection Body.
All reloading hose assemblies meet requirements of Regulation of the Minister of Transport
dated 20 September 2006 on The technical inspection of technical conditions to be met by the device
for filling and empting transport containers.
20 September 2013 is the deadline in Poland for adjusting reloading applications
to above mentioned regulations.
81
INDUSTRIAL HOSES - petrochemical

TRICOFUEL
Internal layer:
Reinforcement:
External layer:
Working temp.:
Transparent, green PVC

Polyester braid
Transparent, green PVC
From -15C to +60C
Characteristics: Flexible delivery hose designed for oil and petrochemical products. Widely used in fuel
installations, pumps and heaters. The material of the hose is particularly resistant to plasticizer
wash-out.
code
I.D.
[mm]
O.D.
[mm]
TR-TRICOFUEL-06
TR-TRICOFUEL-08
TR-TRICOFUEL-10
TR-TRICOFUEL-12
TR-TRICOFUEL-15
TR-TRICOFUEL-20
TR-TRICOFUEL-25
TR-TRICOFUEL-30
6,3
8
10
12
15
20
25
30
11
14
16
19
23
28
32,5
39
working
pressure
[bar]
13
13
10
10
10
10
8
8
bursting
pressure
[bar]
39
39
30
30
30
30
24
24
bending
radius
[mm]
44
56
70
84
105
140
175
210
weight
[kg/m]
0,08
0,13
0,15
0,21
0,29
0,38
0,42
0,61
standard
length
[m]
25
25
25
25
25
25
25
25
VACUPRESS OIL
Internal layer:
Reinforcement:
External layer:
Working temp.:
PVC/PU/NBR compound
Steel wire helix, polyester cord
PVC/PU/NBR compound
From -25C to +55C
Characteristics: Robust, flexible, abrasion resistant suction-delivery hose designed to transfer hydraulic oils
and fuels. Widely used in tank trucks to deliver heating oil to central heating systems of many
households. Hoses with diameters 76 102 mm have antistatic wires and polyurethane external
layer.
code
I.D.
[mm]
O.D.
[mm]
vacuum
[bar]
ME-VACUPROIL-019
ME-VACUPROIL-025
ME-VACUPROIL-032
ME-VACUPROIL-035
ME-VACUPROIL-038
ME-VACUPROIL-040
ME-VACUPROIL-045
ME-VACUPROIL-050
ME-VACUPROIL-060
ME-VACUPROIL-063
ME-VACUPROIL-076
ME-VACUPROIL-080
ME-VACUPROIL-090
ME-VACUPROIL-102
19
25
32
35
38
40
45
50
60
63
76
80
90
102
28
35,6
42,6
48
51
53
58
63
74
77
90,5
94,5
106
117,5
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
82
working
pressure
[bar]
16
16
16
14
14
14
12
12
12
12
10
10
10
10
bursting
pressure
[bar]
48
48
48
42
42
42
36
36
36
36
30
30
30
30
bending
radius
[mm]
70
80
100
120
125
130
140
150
180
190
210
220
250
300
weight
[kg/m]
0,45
0,64
0,80
1,05
1,20
1,25
1,34
1,73
1,95
2,03
2,70
2,80
3,25
3,70
standard
length
[m]
60
60
60
60
40
40
40
40
40
40
30
30
30
30
AMERICA OIL
Material:
PVC
Reinforcement: Rigid PVC helix
Characteristics: Lightweight, very flexible, suction-delivery hose designed to convey mineral and synthetic oils.
An antistatic version with a copper wire going along PVC helix is also available.
code
I.D.
[mm]
ME-AMEROIL-025
ME-AMEROIL-032
ME-AMEROIL-038
ME-AMEROIL-051
ME-AMEROIL-063
ME-AMEROIL-076
ME-AMEROIL-102
ME-AMEROIL-152
25
32
38
51
63
76
102
152
wall
thickness
[mm]
4,5
4,7
4,8
5,5
6
6,4
7,4
9
working
pressure
[bar]
6
5
5
4,5
4
3,5
2,5
1,5
vacuum
[bar]
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
bending
radius
[mm]
90
115
135
175
220
270
360
530
weight
[kg/m]
0,48
0,58
0,68
1,05
1,39
1,70
2,70
5,00
standard
length
[m]
50
50
50
50
50
50
30
30
INFINITYTM
Reinforcement: Textile braid
External layer: Black ChemivicTM synthetic rubber +
orange-green Pliovic external helix
Characteristics: Suction-delivery hose designed to transfer liquid petrochemical products with aromatic content
up to 60%. Very lightweight, flexible and easy to handle due to the exclusive construction based
on the double external helix. The hose features copper wires to ensure electrical conductivity.
code
I.D.
[mm]
O.D.
[mm]
GY-INFINITY-050
GY-INFINITY-075
GY-INFINITY-100
51
76
102
71
96
122
bending
radius
[mm]
38
50
65
working
pressure
[bar]
10
6,9
5,2
vacuum
[bar]
weight
[kg/m]
0,77
0,77
0,77
1,52
2,18
2,57
standard
length
[m]
30,5
30,5
30,5
83
NAFTREX / B
Black textile braid protecting
against heat
Internal layer:
External layer:
Characteristics: Developed for fuel and cooling systems. Working temperature depends on the medium: for fuels
with aromatic content up to 50% it is +40C; for diesel oil, air, non-oxydating liquid detergents it
is +80C; for water, glycol-based cooling liquids it is +90C. Fulfils DIN 73379 standard.
code
I.D.
[mm]
BG-3370032070
BG-3370035075
BG-3370040090
BG-3370045095
BG-3370050100
BG-3370055105
BG-3370060110
BG-3370070120
BG-3370075125
BG-3370080130
BG-3370090140
BG-3370115170
3,2
3,5
4
4,5
5
5,5
6
7
7,5
8
9
11,5
wall
thickness
[mm]
1,9
2
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,75
O.D.
[mm]
7
7,5
9
9,5
10
10,5
11
12
12,5
13
14
17
working
pressure
[bar]
15
15
15
15
15
15
15
15
15
15
15
15
bursting
pressure
[bar]
60
60
60
60
60
60
60
60
60
60
60
60
standard
length
[m]
20
20
20
20
20
20
20
20
20
20
20
20
GALVOIL / L
Internal layer: Black, smooth NBR rubber
Reinforcement: External steel braid
Characteristics: Delivery hose designed to transfer transmission, heating and diesel oil as well petrochemical
products. Internal layer resistant to oil and fuel. Manufactured according to ISO 1307 standard.
84
code
I.D.
[mm]
O.D.
[mm]
SL-GALVOIL/L-06
SL-GALVOIL/L-08
SL-GALVOIL/L-10
SL-GALVOIL/L-13
SL-GALVOIL/L-16
6
8
10
13
16
11
13
15
19
22
bending
radius
[mm]
30
40
50
65
80
working
pressure
[bar]
25
25
25
20
20
bursting
pressure
[bar]
75
75
75
60
60
weight
[kg/m]
0,16
0,23
0,28
0,38
0,46
standard
length
[m]
100
100
100
50
50

PZ
Reinforcement: External steel braid
Characteristics: Developed for use in fuel and oil installations. Manufactured according to DIN 73379
standard.
code
I.D.
[mm]
O.D.
[mm]
EC-101005
EC-101006
EC-101008
EC-101010
EC-101012
EC-101015
EC-101018
EC-101020
4,5
5,5
7,5
9
11,5
14,5
17
19
9,5
10,5
12,5
14
18
22
25
29
working
pressure
[bar]
20
20
15
15
15
15
15
10
bursting
pressure
[bar]
60
60
50
50
50
50
50
50
standard
length
[m]
100
100
100
100
100
100
100
100
PZVA
Reinforcement: Stainless steel external braid
Characteristics: Developed for use in fuel and oil installations. Manufactured according to DIN 73379
standard.
code
I.D.
[mm]
O.D.
[mm]
EC-101356
EC-101358
EC-101360
EC-101362
5,5
7,5
9
11,5
10,5
12,5
15
18
working
pressure
[bar]
20
15
15
15
bursting
pressure
[bar]
60
50
50
50
standard
length
[m]
100
100
100
100
FPM / ECO
Internal layer:
Reinforcement:
External layer:
Working temp.:
Viton (FPM)
Textile braid
Synthetic rubber
From -35C to +80C
Characteristics: Special multilayer hose designed to transfer biofuels, particularly those based on rapeseed oil.
Resistant to Rapeseed Methyl Ester (RME).
code
I.D.
[mm]
O.D.
[mm]
EC-101402
EC-101155
EC-101158
EC-101160
EC-101162
3,2
5,5
7,5
9,5
11,5
9
11,5
14,5
16,5
18,5
working
pressure
[bar]
25
15
15
15
15
bursting
pressure
[bar]
80
50
40
40
40
standard
length
[m]
100
100
100
100
100
85
CARBUR 10-20 BAR

Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth, antistatic NBR rubber

Robust synthetic fabric
Black, smooth PVC/NBR compound
From -20C to +60C
Characteristics: Flexible, delivery hose designed to transfer liquid petrochemical products with aromatic content
up to 50%. Suitable for oil systems, lubrication systems, etc. External layer resistant to fuel, oil,
weather conditions, ozone and abrasion.
code
I.D.
[mm]
O.D.
[mm]
IV-CARBUR/10-05
IV-CARBUR/10-06
IV-CARBUR/10-08
IV-CARBUR/10-10
IV-CARBUR/10-13
IV-CARBUR/10-15
IV-CARBUR/10-19
IV-CARBUR/10-25
5
6
8
10
13
15
19
25
12
13
15
17
20
23
27
35
IV-CARBUR/20-06
IV-CARBUR/20-08
IV-CARBUR/20-10
6
8
10
14
17
19
working
bursting
pressure
pressure
[bar]
[bar]
CARBUR 10 bar
10
30
10
30
10
30
10
30
10
30
10
30
10
30
10
30
CARBUR 20 bar
20
60
20
60
20
60
bending
radius
[mm]
weight
[kg/m]
standard
length
[m]
40
50
65
80
105
120
150
200
0,13
0,14
0,17
0,20
0,24
0,32
0,38
0,60
100
100
100
100
60
60
60
60
60
65
80
0,17
0,24
0,28
100
100
100
TU 25
Internal layer:
Reinforcement:
External layer:
Working temp.:

Textile braid
Black, smooth CR/SBR compound
From -40C to +80C
Characteristics: Delivery hose used to transfer unleaded fuel, diesel oil, heating oil and air. Conductive internal
layer - R<106 /m.
86
code
I.D.
[mm]
O.D.
[mm]
SP-681750649
SP-681750849
SP-681751040
SP-681751340
SP-681751645
SP-681751950
SP-681752555
6
8
10
13
16
19
25
14
16
18
21
25
29
36
bending
radius
[mm]
40
50
60
80
100
120
150
working
pressure
[bar]
25
25
25
25
25
25
25
bursting
pressure
[bar]
80
80
80
80
80
80
80
weight
[kg/m]
0,15
0,20
0,25
0,30
0,40
0,50
0,70
standard
length
[m]
100
100
50
50
50
50
50
TU 40
Internal layer:
Reinforcement:
External layer:
Working temp.:

Textile braid
Black, smooth SBR/NVC rubber
From -45C to +70C
(for fuel and oil -45C to +125C)
Characteristics: Delivery hose used to transfer fuels, diesel oil, heating oil and air.
Conductive internal layer - R<106 /m.
code
I.D.
[mm]
O.D.
[mm]
SP-681760435
SP-681760635
SP-681760835
SP-681761035
4
6
8
10
11
13
15
17
bending
radius
[mm]
50
64
73
77
working
pressure
[bar]
40
40
40
40
bursting
pressure
[bar]
160
160
160
160
weight
[kg/m]
0,11
0,16
0,19
0,22
standard
length
[m]
50
50
50
50
FUB
Internal layer:
Reinforcement:
External layer:
Working temp.:

Textile braid
Black, smooth CR/NBR compound
From -40C to +100C
(for fuel from -30C to +70C)
Characteristics: Delivery hose used to transfer unleaded fuel, diesel oil. Not suitable for methanol-based fuels.
code
I.D.
[mm]
O.D.
[mm]
SP-680300330
SP-680300331
SP-680300430
SP-680300431
SP-680300530
SP-680300531
SP-680300630
SP-680300631
SP-680300730
SP-680300731
SP-680300830
SP-680300930
SP-680300931
SP-680301030
SP-680301130
SP-680301235
3,2
3,5
4
4,5
5
5,5
6
6,3
7
7,5
8
9
9,5
10
11
12
9,2
9,5
10
10,5
11
11,5
12
12,3
13
13,5
14
15
15,5
16
17
19
bending
radius
[mm]
38
42
48
54
60
66
72
72
84
90
96
108
114
120
132
144
working
pressure
[bar]
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
bursting
pressure
[bar]
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
weight
[kg/m]
0,08
0,08
0,08
0,09
0,10
0,10
0,10
0,10
0,12
0,12
0,13
0,14
0,15
0,15
0,16
0,21
standard
length
[m]
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
87
SOFTWALL PETROL EN 1360

Internal layer:
Reinforcement:
External layer:
Working temp.:
Chemigum rubber compound

Textile braid
Black, conductive, synthetic rubber
From -30C to +55C
Characteristics: Delivery hose designed to transfer fuel and diesel oil. Widely used for fuel dispensers at petrol
stations. The hose features copper wires to ensure electrical conductivity.
Standards:
EN 1360, ISO 1307.
code
I.D.
[mm]
O.D.
[mm]
GY-SWPETROL-16
GY-SWPETROL-19
GY-SWPETROL-25
15,9
19,1
25,4
25,4
29
35
bending
radius
[mm]
160
190
255
working
pressure
[bar]
16
16
16
bursting
pressure
[bar]
64
64
64
weight
[kg/m]
0,29
0,32
0,44
standard
length
[m]
152,5
152,5
152,5
FLEXSTEEL VAPOR ASSIST

Internal layer:
Reinforcement:
External layer:
Working temp.:
Black NBR rubber

Steel wire braid
Futurin synthetic rubber
From -40C to +60C
Characteristics: Hose developed to refuel vehicles with petrol at the petrol stations. During refuelling a pump in
the dispenser pulls the petrol vapours away from the tank through the vehicle fill pipe. Special
construction of the hose provides excellent kink resistance and long service life. Supplied only
as a complete hose assembly with M34x1,5 male thread fittings made from chrome-plated
brass. The internal hose is made from nylon. Manufactured according to EN 13483.
code
GY-VASSIST-019-4
GY-VASSIST-019-5
GY-VASSIST-019-6
88
I.D.
[mm]
19,1
O.D.
[mm]
28,7
working
pressure
[bar]
16
bursting
pressure
[bar]
300
bending
radius
[mm]
length
[m]
130
4
5
6
SAE 100 R4
Internal layer:
Reinforcement:
External layer:
Working temp.:

From -40C to +100C
Characteristics: Robust suction-delivery hose designed to transfer liquid petroleum products with aromatic
content up to 30%. In particular used in hydraulic system as an oil return hose. Fulfils SAE 100
R4 standards. External layer resistant to abrasion, oil mist and weather conditions.
code
I.D.
[mm]
O.D.
[mm]
IV-SAE/100/R4-19
IV-SAE/100/R4-25
IV-SAE/100/R4-30
IV-SAE/100/R4-32
IV-SAE/100/R4-35
IV-SAE/100/R4-38
IV-SAE/100/R4-40
IV-SAE/100/R4-42
IV-SAE/100/R4-45
IV-SAE/100/R4-51
19
25
30
32
35
38
40
42
45
51
30
38
41
43
47
49,5
53
54
56,5
64
working
pressure
[bar]
20
17
15
14
13
10
8
8
8
7
bursting
pressure
[bar]
94
71
60
56
52
43
35
35
35
30
bending
radius
[mm]
125
152
185
200
230
250
255
260
280
305
weight
[kg/m]
0,73
0,90
0,92
0,96
1,18
1,27
1,45
1,38
1,46
1,95
standard
length
[m]
120
120
120
120
120
120
120
120
120
120
RAGNO SAE 100 R6

Thermoplastic compound
(hardness 70 Shore-A)
Reinforcement: Double polyester cord
External layer: Thermoplastic compound
(hardness 75 Shore-A)
Internal layer:
Characteristics: Robust delivery hose designed mainly for low pressure hydraulic applications and to transfer
hydraulic fluids, hydrocarbons, oils, fats, air, water, etc. Excellent resistance to weather
conditions, both mineral and synthetic oils and fats. Meets SAE 100 R6 standards. Bending
radius and tolerance parameters according to SAE J 517.
code
I.D.
[mm]
O.D.
[mm]
ME-RAGNO/R6-05
ME-RAGNO/R6-06
ME-RAGNO/R6-08
ME-RAGNO/R6-09
ME-RAGNO/R6-12
ME-RAGNO/R6-16
ME-RAGNO/R6-19
5
6,3
8
9,5
12,7
16
19
11,1
12,7
14,3
16
20
23
27,5
bending
radius
[mm]
50
65
75
75
100
125
150
working
pressure
[bar]
35
28
28
28
28
24
21
bursting
pressure
[bar]
140
112
112
112
112
98
84
weight
[kg/m]
0,95
0,11
0,13
0,16
0,22
0,26
0,35
standard
length
[m]
120
120
120
120
120
120
60
89
POSEIDON
External layer: Black, self-extinguishing
synthetic rubber
Characteristics: Softwall, flexible delivery hose designed for fuel systems on boats, motor boats, yachts, etc.
Complies with ISO 7840:04 A1 CE, SAE J 1527:04, approved by R.I.N.A.
code
I.D.
[mm]
O.D.
[mm]
IV-POSEIDON/EX-06
IV-POSEIDON/EX-08
IV-POSEIDON/EX-10
IV-POSEIDON/EX-13
IV-POSEIDON/EX-16
IV-POSEIDON/EX-19
IV-POSEIDON-22
IV-POSEIDON-25
IV-POSEIDON-30
IV-POSEIDON-32
IV-POSEIDON-35
IV-POSEIDON-38
IV-POSEIDON-40
IV-POSEIDON-45
IV-POSEIDON-50
IV-POSEIDON-60
6
8
10
13
16
19
22
25
30
32
35
38
40
45
50
60
14
16
19
22
25
28
32,5
35,5
40,5
42,5
45,5
48,5
50,5
55,5
60,5
71,5
working
pressure
[bar]
3,4
3,4
3,4
2,5
2,5
2,5
10
10
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
13,6
13,6
13,6
10
10
10
30
30
30
30
30
30
30
30
30
30
weight
[kg/m]
0,19
0,29
0,31
0,45
0,53
0,59
0,58
0,64
0,75
0,79
0,85
0,92
0,94
1,04
1,14
1,52
standard
length
[m]
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
POSEIDON / LL
Reinforcement: Synthetic cord, steel wire helix
External layer: Black, self-extinguishing
synthetic rubber
Characteristics: Softwall, flexible suction-delivery hose designed for fuel systems on boats, motor boats, yachts,
etc. Complies with ISO 7840:04 A1 CE, SAE J 1527:04, approved by R.I.N.A.
code
I.D.
[mm]
O.D.
[mm]
IV-POSEIDON/LL-19
IV-POSEIDON/LL-25
IV-POSEIDON/LL-35
IV-POSEIDON/LL-38
IV-POSEIDON/LL-45
IV-POSEIDON/LL-50
IV-POSEIDON/LL-63
19
25
35
38
45
50
63,5
30,5
36,5
47
50
58
63
77
90
working
pressure
[bar]
10
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
30
weight
[kg/m]
0,70
0,86
1,21
1,29
1,64
1,79
2,45
standard
length
[m]
120
120
120
120
120
120
120

IVALO
Internal layer: Black, smooth NBR rubber
External layer: Black, corrugated,
self-extinguishing CR rubber
Characteristics: Lightweight, flexible suction-delivery hose designed to transfer liquid petrochemical products with
aromatic content up to 30%. External layer complies with ASTM C 542, resistant to abrasion,
oil, ozone and weather conditions.
code
I.D.
[mm]
IV-IVALO-019
IV-IVALO-022
IV-IVALO-025
IV-IVALO-032
IV-IVALO-035
IV-IVALO-038
IV-IVALO-045
IV-IVALO-051
IV-IVALO-063
IV-IVALO-076
IV-IVALO-090
IV-IVALO-102
19
22
25
32
35
38
45
51
63
76
90
102
working
pressure
[bar]
5
5
5
5
5
5
5
5
5
3
3
3
bursting
pressure
[bar]
15
15
15
15
15
15
15
15
15
9
9
9
bending
radius
[mm]
50
55
60
80
90
95
110
130
160
190
230
260
weight
[kg/m]
0,40
0,45
0,50
0,60
0,67
0,70
0,80
1,00
1,30
1,70
2,00
2,40
standard
length
[m]
60
60
60
60
60
60
60
60
60
60
60
60
OIL COMPRESSOR
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth CPE rubber

Synthetic cord
Blue, self-extinguishing CR rubber
From -30C to +130C
Characteristics: Robust flexible hose used for oil, hot air and diluted chemical products. External layer resistant
to abrasion and weather conditions.
code
I.D.
[mm]
O.D.
[mm]
IV-COMPRESSOR-13
IV-COMPRESSOR-19
IV-COMPRESSOR-25
IV-COMPRESSOR-32
IV-COMPRESSOR-38
IV-COMPRESSOR-51
13
19
25
32
38
51
22
31
37
46
55
67
working
pressure
[bar]
40
40
40
40
40
40
bursting
pressure
[bar]
120
120
120
120
120
120
standard
length
[m]
120
120
120
120
120
120
91
AUSTRALIA
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth NBR compound

Synthetic cord
Black, smooth CR compound
From -20C to +70C
Characteristics: Delivery hose designed to transfer liquid petrochemical products with aromatic content up to
30%. The hose features copper wires to ensure electrical conductivity. External layer resistant
to abrasion, oil and weather conditions.
code
I.D.
[mm]
O.D.
[mm]
IV-AUSTRALIA-010
IV-AUSTRALIA-013
IV-AUSTRALIA-016
IV-AUSTRALIA-019
IV-AUSTRALIA-022
IV-AUSTRALIA-025
IV-AUSTRALIA-028
IV-AUSTRALIA-032
IV-AUSTRALIA-035
IV-AUSTRALIA-038
IV-AUSTRALIA-040
IV-AUSTRALIA-045
IV-AUSTRALIA-051
IV-AUSTRALIA-060
IV-AUSTRALIA-063
IV-AUSTRALIA-076
IV-AUSTRALIA-090
IV-AUSTRALIA-102
10
13
15
19
22
25
28
32
35
38
40
45
51
60
63,5
76
90
102
17
20
23
27
30
35
38
42
45
47
50
55
61
73
74
89
105
115,5
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
weight
[kg/m]
0,20
0,25
0,31
0,39
0,59
0,66
0,72
0,82
0,86
0,88
0,90
1,01
1,12
1,82
1,46
2,14
2,87
2,97
BEST PRICE !!!

Standard hose assemblies for reloading applications
Standard length 6 m,
composite or rubber hose assemblies with 3 (75 mm) or 4
(100 mm) internal diameter with
with aluminium CAMLOCK couplings (type C and E)
For more information please contact our branches.
92
standard
length
[m]
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120
120

PUERTORICO
Internal layer:
Reinforcement:
External layer:
Working temp.:

From -20C to +70C
Characteristics: Robust, suction-delivery hose designed to transfer fuels and liquid petrochemical products with
aromatic content up to 30%. The hose features copper wires to ensure electrical conductivity.
External layer resistant to abrasion, oil, ozone and weather conditions.
code
I.D.
[mm]
O.D.
[mm]
IV-PUERTO-032
IV-PUERTO-038
IV-PUERTO-051
IV-PUERTO-063
IV-PUERTO-076
IV-PUERTO-090
IV-PUERTO-102
32
38
51
63,5
76
90
102
42
49
62
76
89
105,5
117,5
working
pressure
[bar]
10
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
30
bending
radius
[mm]
135
165
230
290
360
450
515
weight
[kg/m]
0,83
1,08
1,49
2,29
2,76
4,02
4,51
standard
length
[m]
120
120
120
120
120
120
120
CARACAS
Internal layer:
Reinforcement:
External layer:
Working temp.:

Black, corrugated CR rubber
From -20C to +70C (CARACAS 30%)
From -54C to +70C (CARACAS 50%)
Characteristics: Lightweight, flexible suction-delivery hose designed to transfer liquid petrochemical products. The
hose features copper wires to ensure electrical conductivity. Excellent for reloading applications.
External layer resistant to abrasion, oil, ozone and weather conditions.
code
I.D.
[mm]
IV-CARACAS-032
IV-CARACAS-038
IV-CARACAS-051
IV-CARACAS-063
IV-CARACAS-076
IV-CARACAS-102
32
38
51
63,5
76
102
IV-CARACAS/50-051
IV-CARACAS/50-063
IV-CARACAS/50-076
IV-CARACAS/50-102
51
63,5
76
102
working
bursting
vacuum
pressure
pressure
[bar]
[bar]
[bar]
for products with up to 30% aromatic contents
43,5
6
18
0,54
50
6
18
0,54
63
6
18
0,54
77
6
18
0,54
90
6
18
0,54
117
6
18
0,54
for products with up to 50% aromatic contents
62
6
18
0,54
77
6
18
0,54
89
4
12
0,54
117
4
12
0,54
O.D.
[mm]
bending
radius
[mm]
weight
[kg/m]
standard
length
[m]
90
105
135
180
210
275
0,93
1,19
1,54
2,27
2,65
3,68
60
60
60
60
60
60
125
165
190
250
1,39
1,77
2,20
2,90
60
60
60
60
93
ARCTIC TANK TRUCK

Reinforcement: Textile braid, steel wire helix
External layer: Blue, corrugated Wingprene
rubber compound
Characteristics: Suction-delivery hose designed to transfer petrochemical products. Remains flexible even at
extremely low temperatures. Safety factor 4:1.
code
I.D.
[mm]
O.D.
[mm]
GY-ARCTICTT-051
GY-ARCTICTT-063
GY-ARCTICTT-076
GY-ARCTICTT-102
50,8
63,5
76,2
101,6
64,3
76,7
90,2
117,1
bending
radius
[mm]
100
125
150
225
working
pressure
[bar]
17
13
10
10
vacuum
[bar]
weight
[kg/m]
0,9
0,9
0,9
0,9
1,64
2,11
2,75
3,90
standard
length
[m]
30,5
30,5
30,5
30,5
EXTREMEFLEX
Reinforcement: Textile braid, steel wire helix
External layer: Black, corrugated ChemivicTM
rubber compound
Characteristics: Extremely flexible, suction-delivery hose developed to transfer liquid petrochemical products with
aromatic content up to 60%. A corrugated external layer provides perfect abrasion resistance
and ease while dragging the hose. Also available with a red external layer.
code
I.D.
[mm]
O.D.
[mm]
GY-EXTREMEFLEX-019
GY-EXTREMEFLEX-025
GY-EXTREMEFLEX-038
GY-EXTREMEFLEX-051
GY-EXTREMEFLEX-063
GY-EXTREMEFLEX-076
GY-EXTREMEFLEX-102
19,1
25,4
38,1
50,8
63,5
76,2
101,6
30,5
36,8
48,5
61,8
76,1
88,8
115,7
94
bending
radius
[mm]
19,5
25,4
38,1
50,8
63,5
76,2
101,6
working
pressure
[bar]
17
17
17
17
13
13
10
vacuum
[bar]
weight
[kg/m]
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,65
0,81
1,08
1,43
2,10
2,51
3,61
standard
length
[m]
30,5
30,5
30,5
30,5
30,5
30,5
30,5
GENOVA EN 12115:95
Internal layer:
Reinforcement:
External layer:
Working temp.:

Synthetic cord
Black, antistatic synthetic rubber
From -20C to +70C
Characteristics: Delivery hose developed to transfer liquid petrochemical products with aromatic content up to
50%. The hose features copper wires to ensure electrical conductivity. External layer resistant
to abrasion, oil, ozone and weather conditions.
code
I.D.
[mm]
O.D.
[mm]
IV-GENOVA/EN-019
IV-GENOVA/EN-025
IV-GENOVA/EN-032
IV-GENOVA/EN-038
IV-GENOVA/EN-050
IV-GENOVA/EN-063
IV-GENOVA/EN-075
IV-GENOVA/EN-100
19
25
32
38
50
63,5
75
100
31
37
44,5
51
66
79,5
91
116
working
pressure
[bar]
16
16
16
16
16
16
16
16
bursting
pressure
[bar]
64
64
64
64
64
64
64
64
weight
[kg/m]
0,59
0,67
0,87
1,09
1,75
2,08
2,42
3,17
standard
length
[m]
120
120
120
120
120
120
120
120
GENOVA / LL EN 12115:95
Internal layer:
Reinforcement:
External layer:
Working temp.:

Black, antistatic synthetic rubber
From -20C to +70C
Characteristics: Suction-delivery hose developed to transfer liquid petrochemical products with aromatic content
up to 50%. The hose features copper wires to ensure electrical conductivity. The external layer
resistant to abrasion, oil, ozone and weather conditions.
code
I.D.
[mm]
O.D.
[mm]
IV-GENOVA/LL/EN-019
IV-GENOVA/LL/EN-025
IV-GENOVA/LL/EN-032
IV-GENOVA/LL/EN-038
IV-GENOVA/LL/EN-050
IV-GENOVA/LL/EN-063
IV-GENOVA/LL/EN-075
IV-GENOVA/LL/EN-100
19
25
32
38
50
63,5
75
100
31,5
37,5
44,5
51,5
65
78
90
116
working
pressure
[bar]
16
16
16
16
16
16
16
16
bursting
pressure
[bar]
64
64
64
64
64
64
64
64
bending
radius
[mm]
150
160
175
225
275
300
350
450
weight
[kg/m]
0,73
0,89
1,10
1,44
2,02
2,54
3,07
4,52
standard
length
[m]
120
120
120
120
120
120
120
120
95
AVIO GLOBAL C
Internal layer:
Reinforcement:
External layer:
Working temp.:

Synthetic cord
From -25C to +70C
Characteristics: Delivery hose developed to transfer jet fuel A1 (direct refuelling of aircrafts) and liquid
petrochemical products with aromatic content up to 50%. Suitable for hose reels application.
The external layer resistant to abrasion, oil and weather conditions. Complies with BS 3158,
API 1529, EN 1361, AS 2683, VG 95955, NFPA 407.
code
I.D.
[mm]
O.D.
[mm]
IV-AVIO/C-019
IV-AVIO/C-025
IV-AVIO/C-032
IV-AVIO/C-038
IV-AVIO/C-050
IV-AVIO/C-063
IV-AVIO/C-075
IV-AVIO/C-100
19
25
32
38
50
63,5
75
100
32,5
38,5
45,5
52
68
81
92,5
119
working
pressure
[bar]
20
20
20
20
20
20
20
20
bursting
pressure
[bar]
80
80
80
80
80
80
80
80
weight
[kg/m]
0,64
0,79
0,97
1,15
1,93
2,28
2,65
3,67
standard
length
[m]
60
60
60
60
60
60
60
60
AVIO GLOBAL E
Internal layer:
Reinforcement:
External layer:
Working temp.:

From -25C to +70C
Characteristics: Suction-delivery hose designed to transfer jet fuel A1 and liquid petrochemical products with
aromatic content up to 50%. The external layer is antistatic, resistant to abrasion, oil and weather
conditions. The hose features copper wire(s) to ensure electrical conductivity. Not suitable for
direct refuelling of aircrafts (check AVIO GLOBAL C). Complies with BS 3158, API 1529, EN
1361,AS 2683, VG 95955, NFPA 407. Vacuum: 0,85 bar.
96
code
I.D.
[mm]
O.D.
[mm]
IV-AVIO/E-025
IV-AVIO/E-038
IV-AVIO/E-050
IV-AVIO/E-063
IV-AVIO/E-075
IV-AVIO/E-100
25
38
50
63,5
75
100
39
52
67,5
82,5
94
118,5
working
pressure
[bar]
20
20
20
20
20
20
bursting
pressure
[bar]
80
80
80
80
80
80
weight
[kg/m]
0,68
1,56
1,98
2,12
2,41
3,16
standard
length
[m]
60
60
60
60
60
60
SEVEN CORD
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth polyacrylic compound

Steel wire helix
From -15C to +200C
Characteristics: Robust, flexible delivery hose designed to transfer liquid asphalt. Excellent for reloading
applications. External layer resistant to abrasion, oil, ozone, tar and weather conditions.
code
I.D.
[mm]
O.D.
[mm]
IV-SEVENCORD-13
IV-SEVENCORD-16
IV-SEVENCORD-19
IV-SEVENCORD-25
IV-SEVENCORD-32
IV-SEVENCORD-40
IV-SEVENCORD-51
13
16
19
25
32
40
51
25
28
31
39
45
54
65
working
pressure
[bar]
10
10
10
10
10
10
10
bursting
pressure
[bar]
40
40
40
40
40
40
40
bending
radius
[mm]
104
128
152
200
256
300
408
weight
[kg/m]
0,55
0,63
0,72
1,23
1,19
1,53
1,89
standard
length
[m]
120
120
120
120
120
120
120
SEVEN
Internal layer:
Reinforcement:
External layer:
Working temp.:

Steel braid, steel wire helix
From -15C to +200C
Characteristics: Robust, flexible suction-delivery hose designed to transfer liquid asphalt. Excellent for reloading
applications. External layer resistant to abrasion, oil, ozone, tar and weather conditions. Available
manufactured according to EN 13482:2001 (diameters DN51, DN63, DN 76, DN 102).
code
I.D.
[mm]
O.D.
[mm]
IV-SEVEN-019
IV-SEVEN-025
IV-SEVEN-032
IV-SEVEN-038
IV-SEVEN-051
IV-SEVEN-063
IV-SEVEN-076
IV-SEVEN-090
IV-SEVEN-102
19
25
32
38
51
63,5
76
90
102
32
40
48
53,5
69,5
81
95,5
109,5
125
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
40
40
40
40
40
40
40
40
40
bending
radius
[mm]
75
100
125
150
200
250
300
330
400
weight
[kg/m]
0,93
1,24
1,71
1,92
2,66
3,12
4,95
5,73
7,82
standard
length
[m]
120
120
120
120
120
120
120
60
60
97
FUEL SOFTWALL
Internal layer:
Reinforcement:
External layer:
Working temp.:

Synthetic cord
From -25C to +90C
Characteristics: Delivery hose designed to transfer liquid petrochemical products with aromatic content up
to 50%. The hose features copper wires to ensure electrical conductivity. Self-extinguishing
external layer resistant to abrasion, oil, sea water and weather conditions. It is a specialist hose
designed to serve oil-rigs. Widely used in the North Sea.
code
I.D.
[mm]
O.D.
[mm]
IV-FUEL/SW-076
IV-FUEL/SW-102
IV-FUEL/SW-127
IV-FUEL/SW-152
IV-FUEL/SW-203
76
102
127
152
203
91,5
118
145
174
225
working
pressure
[bar]
17
17
17
17
17
bursting
pressure
[bar]
60
60
60
60
60
standard
length
[m]
120
120
120
120
60
FUEL HARDWALL
Internal layer:
Reinforcement:
External layer:
Working temp.:

From -25C to +90C
From -20C to +90C (FUEL/HW/30)
Characteristics: Suction-delivery hose designed to transfer liquid petrochemical products with aromatic content
up to 50%. The hose features copper wires to ensure electrical conductivity. Self-extinguishing
external layer resistant to abrasion, oil, sea water and weather conditions. The hose has a
tensile strength of up to 4 tons. It is a specialist hose designed to serve oil-rigs. Widely used
in the North Sea.
code
I.D.
[mm]
IV-FUEL/HW-076
IV-FUEL/HW-102
IV-FUEL/HW-127
IV-FUEL/HW-152
IV-FUEL/HW-203
76
102
127
152
203
IV-FUEL/HW/30-102
IV-FUEL/HW/30-127
IV-FUEL/HW/30-152
102
127
152
98
working
pressure
[bar]
FUEL HARDWALL
94
17
120,5
17
151
17
181,5
17
238
17
FUEL HARDWALL/30
127
30
155,5
30
188
30
O.D.
[mm]
bursting
pressure
[bar]
standard
length
[m]
60
60
60
60
60
120
120
60
60
60
90
90
90
60
60
60
ROTARY VIBRATOR
ROTARY DRILLING
Internal layer: Modified NBR rubber
Reinforcement: Multiple layers of high tensile plated
steel cables and polyester cord
embedded in rubber
External layer: Modified NBR rubber
Characteristics: Heavy duty, flexible hose designed to crude oil, drilling fluid and bailings. Widely used as a
flexible connection between standpipe and swivel (ROTARY DRILLING) or between pump and
standpipe (ROTARY VIBRATOR). External layer resistant to abrasion, corrosion, cutting, oil
and water. Available as complete API 7K certified hose assemblies with HAMMER LUG unions,
API flanges or NPT threads.
I.D.
[mm]
O.D.
[mm]
65
75
90
100
65
75
90
100
105
117
133
142
131
143
153
164
working pressure
test pressure
bursting pressure
[bar]
[psi]
[bar]
[psi]
[bar]
[psi]
344
5000
689
10000
861
12500
517
7500
1034
15000
1292
API
class
18750
bending
radius
[mm]
914
1219
1371
1371
1219
1219
1371
1524
max.
length
[m]
27
CHOKE & KILL

Internal layer: Viton
Reinforcement: Multiple layers of high tensile plated
steel cables and polyester cord
embedded in rubber
External layer: Modified NBR rubber
Characteristics: Hose designed to BOP (Blow Out Preventer) systems to control well kicks during exploaration
work. During drilling, pockets of high pressure gas may get into the drill string. As the gas moves
upward it expands making the drilling mud too lightweight to control pressure in the hole. If the
kick is too strong, it can blow out the well. To prevent this high pressure, mud, up to 15,000 psi,
is pumped down the choke line to force the gas back into the formation. If this is not successful,
high pressure cement, up to 15,000 psi, is pumped down the well through the kill line and seals
it permanently.
I.D.
[mm]
O.D.
[mm]
65
75
90
100
65
75
90
65
75
105
117
133
162
130
143
153
143
156
working pressure
test pressure
bursting pressure
[bar]
[psi]
[bar]
[psi]
[bar]
[psi]
344
5000
689
10000
1034
15000
689
10000
1034
15000
1551
22500
1034
15000
1551
22500
2326
33750
bending
radius
[mm]
914
1219
1371
1524
1219
1219
1371
1524
1524
max.
length
[m]
27
99

Complete hose assemblies for drilling equipment
Hose assemblies designed for drilling applications are pressure tested and supplied with vulcanised or specially
crimped fittings.
Most often used fittings:
- HAMMER LUG unions (fig. 602, fig.1002, fig. 1003, fig. 1502, fig. 2002, fig. 2202),
- API 16BX hub connections,
- API 6B, 6BX type flanges,
- fittings with API LPT (NPT) thread.
For HAMMER LUG unions please chapter COUPLINGS,VALVES AND CLAMPS.
Example of ROTARY DRILLING DN 75 hose assembly
HAMMER LUG union

fig. 1502 (female) 3,
NPT female thread
100
ROTARY DRILLING DN 75 hose

with 3 NPT male fittings
HAMMER LUG union

fig. 1502 (male) 3,
NPT female thread + nut
INDUSTRIAL HOSES - material handling

ORINOCO 2000
Black, smooth, antistatic SBR/NR
rubber compound
Reinforcement: Double synthetic cord
External layer: Black, smooth, antistatic SBR/NR
rubber compound
Internal layer:
Characteristics: Heavy duty, long-lasting hose extremely resistant to abrasion. Widely used for sandblasting,
shot-blasting (cast steel shot). Resistant to abrasion according to DIN 53516: 50 mm3. For
application with sandblasting couplings as a standard.
code
I.D.
[mm]
O.D.
[mm]
IV-ORINOCO2000-13
IV-ORINOCO2000-19
IV-ORINOCO2000-25
IV-ORINOCO2000-32
IV-ORINOCO2000-38
IV-ORINOCO2000-40
IV-ORINOCO2000-51
IV-ORINOCO2000-60
IV-ORINOCO2000-65
13
19
25
32
38
40
51
60
65
27
33
40
48
54
60
71
80
85
working
pressure
[bar]
12
12
12
12
12
12
12
12
12
bursting
pressure
[bar]
36
36
36
36
36
36
36
36
36
weight
[kg/m]
0,48
0,61
0,82
1,06
1,22
1,70
2,04
2,28
2,43
standard
length
[m]
120
120
120
120
120
120
120
120
120
SM 1
Black, smooth, antistatic
rubber compound
Reinforcement: Double synthetic cord
External layer: Black, smooth, antistatic SBR rubber
Internal layer:
Characteristics: Heavy duty, long-lasting hose extremely resistant to abrasion. Widely used for sandblasting,
shot-blasting (cast steel shot). Resistant to abrasion according to DIN 53516: 36 mm3. For
application with sandblasting couplings as a standard.
code
I.D.
[mm]
O.D.
[mm]
SP-SM1-13
SP-SM1-19
SP-SM1-25
SP-SM1-32
SP-SM1-38
SP-SM1-42
13
19
25
32
38
42
27
33
39
48
56
60
working
pressure
[bar]
12
12
12
12
12
12
bursting
pressure
[bar]
42
42
42
42
42
42
weight
[kg/m]
0,50
0,65
0,80
1,10
1,50
1,65
standard
length
[m]
40
40
40
40
40
40
101
NIAGARA
Black, smooth SBR/NR
rubber compound
External layer: Black, smooth SBR/NR
rubber compound
Internal layer:
Characteristics: Hose designed to transfer cement mortar, plaster, gypsum and concrete. Antistatic, resistant
to abrasion, ozone and weather conditions. Resistant to abrasion according to DIN 53516: 80
mm3. For application with mortar couplings as a standard.
code
I.D.
[mm]
O.D.
[mm]
IV-NIAGARA-25
IV-NIAGARA-32
IV-NIAGARA-35
IV-NIAGARA-38
IV-NIAGARA-51
25
32
35
38
51
38
46
49
54
68
working
pressure
[bar]
40
40
40
40
40
bursting
pressure
[bar]
120
120
120
120
120
weight
[kg/m]
0,68
0,89
0,95
1,24
1,71
standard
length
[m]
120
120
120
120
120
DRY ICE
synthetic rubber
External layer: Black, smooth,
antistatic synthetic rubber
Working temp.: Up to -55C
Internal layer:
Characteristics: Heavy duty, long-lasting hose resistant to abrasion. Widely used for dry ice blasting (dry ice blast
cleaning is similar to sandblasting). Antistatic - R<106 /m.
code
I.D.
[mm]
O.D.
[mm]
IV-DRYICE-16
IV-DRYICE-19
16
19
28
31
working
pressure
[bar]
10
10
bursting
pressure
[bar]
40
40
weight
[kg/m]
0,43
0,48
standard
length
[m]
60
60
BETONCINO
Internal layer:
Reinforcement:
External layer:
Working temp.:
PVC layer lined with polyurethane

Two polyester cords
PVC and polyurethane compound
From -15C to +60C
Characteristics: Light, flexible hose designed to deliver cement, plaster and cement mortar that are applied
on walls and ceilings.
code
I.D.
[mm]
O.D.
[mm]
ME-BETONCINO-25
25
37
102
working
pressure
[bar]
40
bursting
pressure
[bar]
100
bending
radius
[mm]
145
weight
[kg/m]
0,72
standard
length
[m]
30

SILOFLAT DISCHARGE
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black smooth NR
Textile braid
Black SBR rubber
From -30C to +80C
Characteristics: Hose designed for unloading of silos storing grain, dry cement, lime, etc (no pressure discharge).
Electrically conductive internal layer. Resistant to abrasion according to DIN 53516:70 80 mm3.
code
I.D.
[mm]
O.D.
[mm]
BG-3546152166
BG-3546203217
BG-3546254270
BG-3546305323
152
203
254
305
166
217
270
323
wall
thickness
[mm]
7
7
8
9
standard
length
[m]
20
20
20
10
CERAHOSE
Ceramic balls (3 mm diameter)
embedded in NR
Reinforcement: Textile cord
External layer: Black NR
Internal layer:
Characteristics: Delivery hose designed to convey highly abrasive materials e.g. dry cement, coal, coke,
solid recovered fuels, minerals, ceramic powders, cast steel shot, glass debris or fiberglass
debris. Widely used in steel mills, coke plants, power plants, cement mills, mines, glass works,
insulation materials factories, etc. Hose versions supplied on special request: suction-delivery,
with antistatic wire or corrugated external layer. Complete hose assemblies with vulcanized
fittings are also available.
code
I.D.
[mm]
O.D.
[mm]
TK-CERAHOSE-013
TK-CERAHOSE-016
TK-CERAHOSE-019
TK-CERAHOSE-025
TK-CERAHOSE-032
TK-CERAHOSE-038
TK-CERAHOSE-045
TK-CERAHOSE-051
TK-CERAHOSE-063
TK-CERAHOSE-076
TK-CERAHOSE-102
12,7
15,9
19
25,4
31,8
38,1
44,5
50,8
63,5
76,2
101,6
28
31,5
38
45,5
52
58
65,5
76
90
103,5
131
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
10
10
bending
radius
[mm]
120
150
190
250
320
380
450
500
650
750
1000
number of
braids
weight
[kg/m]
2
2
2
2
2
2
2
4
4
4
4
0,80
0,90
1,40
1,80
2,00
2,30
2,80
4,00
4,80
5,60
7,90
A comparison of rubber and ceramic hose service lives

application
medium
life of rubber hose
life of ceramic hose
coke transfer
coke
unusable after 6 coke charges
minor signs of abrasion

after 300 coke charges
shot-blasting
cast steel shot

1 2 mm diameter
unusable after 2 months
no signs of abrasion
after 10 months
103

PARAFLEX
2,4 mm layer of black rubber
External layer: Black, corrugated rubber
Internal layer:
Characteristics: Lightweight, suction-delivery hose designed to transfer powders, dust and other low abrasive
materials. Vacuum up to 0,6 bar.
code
I.D.
[mm]
O.D.
[mm]
weight
[kg/m]
IV-PARAF-051
IV-PARAF-060
IV-PARAF-080
IV-PARAF-102
IV-PARAF-110
IV-PARAF-120
IV-PARAF-127
IV-PARAF-152
IV-PARAF-203
IV-PARAF-250
IV-PARAF-305
51
60
80
102
110
120
127
152
203
250
305
59
68
88
113
121
131
138
163
215
262
318
0,90
1,10
1,40
1,96
1,99
2,16
2,28
2,74
4,02
4,97
6,94
bending
radius
[mm]
130
150
240
300
330
360
380
460
810
1000
1220
standard
length
[m]
120
120
120
120
120
120
120
120
120
120
120
ULVAC
3 mm layer of black rubber
External layer: Black, corrugated rubber
Internal layer:
Characteristics: Lightweight, flexible, suction-delivery hose designed to transfer sand, grain, granulated materials,
cement and other highly abrasive materials. The hose features copper wires to ensure electrical
conductivity. Resistant to ozone and weather conditions.
code
I.D.
[mm]
O.D.
[mm]
IV-ULVAC-051
IV-ULVAC-076
IV-ULVAC-102
IV-ULVAC-127
IV-ULVAC-152
51
76
102
127
152
65
90
117
145
171
working
pressure
[bar]
3
3
3
1
1
bursting
pressure
[bar]
9
9
9
3
3
weight
[kg/m]
1,48
2,16
3,16
4,43
6,27
bending
radius
[mm]
250
450
600
850
990
standard
length
[m]
120
120
120
120
120
105

LUISIANA PU ANTISTATIC
Internal layer:
Reinforcement:
External layer:
Working temp.:
Rigid PVC helix
Transparent PVC
From -5C to +85C
Characteristics: Robust, suction-delivery hose designed to transfer products with the high coefficient of friction.
Especially recommended for the transfer of sharp particles - so called reclaimed materials.
There is a copper wire going around the helix that enables discharging static electrical charges
when the hose is grounded. The hose for heavy duty applications, particularly used in plastic
processing where enhanced resistance to abrasion, perforation or cutting is needed.
code
I.D.
[mm]
O.D.
[mm]
ME-LUISIAPU/AS-030
ME-LUISIAPU/AS-040
ME-LUISIAPU/AS-050
ME-LUISIAPU/AS-060
ME-LUISIAPU/AS-070
ME-LUISIAPU/AS-076
ME-LUISIAPU/AS-080
ME-LUISIAPU/AS-090
ME-LUISIAPU/AS-100
30
40
50
60
70
76
80
90
100
37,5
48
59
70,5
81
87
91,5
102
113
working
pressure
[bar]
5
5
4
4
4
3,5
3,5
3,5
3
bending
radius
[mm]
150
200
250
300
350
375
400
450
500
weight
[kg/m]
0,45
0,63
0,90
1,10
1,20
3,00
1,35
1,50
1,80
standard
length
[m]
30
30
30
30
30
30
30
30
30
SUPER ARIZONA PU
Internal layer:
Reinforcement:
External layer:
Working temp.:
Polyurethane
PVC wire helix
PVC
From -25C to +55C
Characteristics: Robust, flexible, smooth inside hose designed to transfer abrasive materials such as: grain,
cement, granulated materials, etc. Version with an antistatic wire is available on request.
code
I.D.
[mm]
ME-SUPARIZONA-032
ME-SUPARIZONA-038
ME-SUPARIZONA-045
ME-SUPARIZONA-050
ME-SUPARIZONA-063
ME-SUPARIZONA-076
ME-SUPARIZONA-089
ME-SUPARIZONA-102
ME-SUPARIZONA-127
ME-SUPARIZONA-152
32
38
45
50
63
76
89
102
127
152
106
wall
thickness
[mm]
4
5
5
5
6
7
7
9
10
11
thickness
PU layer
[mm]
0,8
0,9
0,9
0,9
0,9
1,2
1,2
1,2
1,4
1,4
working
press. 20C
[bar]
6
6
5
5
4
4
3
3
2,5
2
vacuum
[bar]
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
bending
radius
[mm]
130
150
180
200
250
300
360
400
510
610
weight
[kg/m]
0,60
0,70
0,90
1,05
1,39
1,90
2,25
3,10
4,45
6,00

DON/BN SPECIAL
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth, rubber compound

Textile cord
From -40C to +70C
Characteristics: Robust, delivery hose designed to transfer foodstuffs with the high coefficient of friction such
as: sugar, grain, powders, granulated materials. The hose features copper wires to ensure
electrical conductivity. Resistant to abrasion according to DIN 53516: 80 mm3.
code
I.D.
[mm]
O.D.
[mm]
IV-DON/BNS-038
IV-DON/BNS-051
IV-DON/BNS-075
IV-DON/BNS-080
IV-DON/BNS-090
IV-DON/BNS-102
IV-DON/BNS-110
38
51
75
80
90
102
110
56
69
95
102
112
125
130
working
pressure
[bar]
8
8
8
8
8
8
6
bursting
pressure
[bar]
24
24
24
24
24
24
18
standard
length
[m]
60
60
60
60
60
60
60
107

VOLGA / BN SPECIAL
Internal layer:
Reinforcement:
External layer:
Working temp.:
White, smooth rubber compound

From -40C to +70C
Characteristics: Robust, suction-delivery hose designed to transfer foodstuffs with the high coefficient of friction
such as: sugar, grain, powders, granulated materials. The hose features copper wires to ensure
electrical conductivity. Resistant to abrasion according to DIN 53513: 80 mm3.
code
I.D.
[mm]
O.D.
[mm]
IV-VOLGA/BNS-038
IV-VOLGA/BNS-051
IV-VOLGA/BNS-065
IV-VOLGA/BNS-075
IV-VOLGA/BNS-080
IV-VOLGA/BNS-090
IV-VOLGA/BNS-102
IV-VOLGA/BNS-110
38
51
65
75
80
90
102
110
56
69
79,5
95
102
114,5
126
130
working
pressure
[bar]
8
8
8
8
8
8
8
6
bursting
pressure
[bar]
24
24
24
24
24
24
24
18
weight
[kg/m]
2,08
2,48
2,65
4,21
4,93
5,99
6,74
6,17
bending
radius
[mm]
200
250
300
400
420
560
700
850
standard
length
[m]
120
120
120
120
120
120
120
120
VOLGA SUPER
rubber compound
External layer: Black, smooth synthetic rubber
Internal layer:
Characteristics: Hose designed to transfer cement, sand, gravel, animal feed, seeds and other highly abrasive
materials. The hose features copper wires to ensure electrical conductivity. Resistant to abrasion,
ozone and weather conditions. Resistant to abrasion according to DIN 53516: 50 mm3.
code
I.D.
[mm]
O.D.
[mm]
IV-VOLGAS-051
IV-VOLGAS-060
IV-VOLGAS-070
IV-VOLGAS-076
IV-VOLGAS-080
IV-VOLGAS-085
IV-VOLGAS-090
IV-VOLGAS-102
IV-VOLGAS-110
IV-VOLGAS-125
IV-VOLGAS-152
IV-VOLGAS-203
IV-VOLGAS-254
51
60
70
76
80
85
90
102
110
125
152
203
254
69
76
86
95
99
105
110
124
134
151
178,5
232
290
108
working
pressure
[bar]
6
6
6
6
6
6
6
6
6
6
6
6
6
bursting
pressure
[bar]
18
18
18
18
18
18
18
18
18
18
18
18
18
weight
[kg/m]
2,20
2,62
2,98
3,29
3,44
3,85
4,14
5,42
6,87
7,43
11,36
15,78
23,43
standard
length
[m]
60
60
60
60
60
60
60
60
60
60
60
60
60

VOLGA FRA system - for easy hose connection
A system designed for fast, easy and economic connection and disconnection of VOLGA FRA hoses.
Advantages of the system:
- assembly of any number of hoses of different length,
- easy assembly and disassembly,
- reusable connecting parts,
- fast replacement of used or damaged parts,
- leak-tightness at working pressure up to 10 bar and full vacuum.
VOLGA FRA - ABR

NR/SBR rubber compound
External layer: Black, corrugated, synthetic rubber
Internal layer:
Characteristics: Hose designed to transfer cement, sand, gravel, animal feed, seeds and other hard, highly
abrasive materials. There are two more hose options also available: FOOD - for food products
and CHEM - for chemicals. The hose features copper wires to ensure electrical conductivity.
Resistant to ozone, weather conditions and abrasion (according to DIN 53516: 50 mm3).
code
I.D.
[mm]
O.D.
[mm]
IV-VOLGA/ABR-051
IV-VOLGA/ABR-065
IV-VOLGA/ABR-080
IV-VOLGA/ABR-100
IV-VOLGA/ABR-125
IV-VOLGA/ABR-150
IV-VOLGA/ABR-200
IV-VOLGA/ABR-250
IV-VOLGA/ABR-300
51
65
80
100
125
150
200
250
300
83
96
112
132
157
182
233
287
340,5
flange
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
bursting
pressure
[bar]
30
30
30
30
30
30
30
30
30
flat gasket
weight
[kg/m]
3,75
4,50
5,81
6,85
8,26
11,50
15,12
20,46
26,50
standard
length
[m]
60
60
60
60
60
60
60
12
12
L gasket
hose I.D.
[mm]
flange PN10 - DIN 2576
flat gasket *
L gasket **
51
65
80
100
125
150
200
250
300
IV-4205084
IV-4206580
IV-4208084
IV-4210084
IV-4212584
IV-4215084
IV-4220084
IV-4225084
IV-4230080
IV-4705084
IV-4706584
IV-4708084
IV-4710084
IV-4712584
IV-4715084
IV-4720084
IV-4725084
IV-4730084
IV-4750115
IV-4765115
IV-4780115
IV-4710115
IV-4712115
IV-4715115
IV-4720115
IV-4725115
IV-4730115
* gasket for dry and loose products

** gasket for liquid products
109
SOSH
Black, smooth SBR/NBR/BR
rubber compound
Reinforcement: Double textile cord
External layer: Black SBR rubber
Internal layer:
Characteristics: Flexible, delivery hose designed to transfer concrete, cement, sand, gravel, animal feed, seeds,
etc. Widely used for filling and discharging of silos, storage bins, tank trucks. Both internal and
external layers are antistatic. The hose features copper wires to ensure electrical conductivity.
Safety factor 3,15:1.
code
I.D.
[mm]
O.D.
[mm]
SP-483847590
SP-483847511
SP-563849010
SP-563840011
SP-563840111
SP-563840312
SP-563840612
75
75
90
100
110
125
150
93
97
110
122
132
149
174
wall
thickness
[mm]
9
11
10
11
11
12
12
working
pressure
[bar]
6
6
6
6
6
6
6
bending
radius
[mm]
550
550
650
750
850
950
1200
weight
[kg/m]
2,70
3,50
3,70
4,55
4,70
6,25
7,15
standard
length
[m]
40
40
40
40
40
40
40
SMSP
Black, smooth SBR/NBR/BR
rubber compound
Reinforcement: Double textile cord, steel wire helix
External layer: Black SBR rubber
Internal layer:
Characteristics: Flexible, suction-delivery hose designed to transfer concrete, cement, sand, gravel, animal
feed, seeds, etc. Widely used for filling and discharging of silos, storage bins, tank trucks. Both
internal and external layers are antistatic. The hose features copper wires to ensure electrical
conductivity. Safety factor 3,15:1.
110
code
I.D.
[mm]
O.D.
[mm]
SP-563825075
SP-563827575
SP-563820080
SP-563820180
SP-563820390
SP-563821390
SP-563820690
SP-563821810
50
75
100
110
125
127
150
203
65
90
116
126
143
145
168
223
wall
thickness
[mm]
7,5
7,5
8
8
9
9
9
10
working
pressure
[bar]
6
6
6
6
6
6
6
6
bending
radius
[mm]
300
450
600
650
750
750
950
1500
weight
[kg/m]
1,85
2,65
3,95
4,35
5,80
5,90
7,75
10,75
standard
length
[m]
40
40
40
40
40
40
40
15,5

DRAGASTEEL
rubber compound
Reinforcement: Steel wire braids
External layer: Black, smooth CR rubber
Internal layer:
Characteristics: Delivery hose developed to transfer sand, gravel mixed with water in deepening or dredging
of the seabed. The construction of the hose (layers of steel wire braid separated by layers
of rubber) ensures high flexibility therefore it can be used to transport dredging spoil from a
dredger to some different location where it is disposed. The external layer is resistant to sea
water, oil, abrasion and weather conditions. Supplied as a complete hose assembly with builtin (vulcanized), rubber protected flanges. Versions with different diameters or higher working
pressure available on request.
code
I.D.
[mm]
O.D.
[mm]
IV-DRAGASTEEL-200
IV-DRAGASTEEL-250
IV-DRAGASTEEL-300
IV-DRAGASTEEL-350
IV-DRAGASTEEL-400
IV-DRAGASTEEL-500
200
254
300
350
400
500
246
310
354
401
446
551
working
pressure
[bar]
15
15
15
15
15
15
bursting
pressure
[bar]
45
45
45
45
45
45
weight
[kg/m]
21
32
35
42
43
77
standard
length
[m]
12
12
12
12
12
12
ALBERT
rubber compound
External layer: Black, corrugated SBR rubber
Internal layer:
Characteristics: Suction-delivery hose developed to transfer sand, gravel mixed with water in deepening or
dredging of the seabed. Widely used for the suction of dredging spoil (pulp) from the bed of a
water area. The external layer is resistant to sea water, oil, abrasion and weather conditions.
Supplied as a complete hose assembly with built-in (vulcanized), rubber protected flanges or
enlarged ends. Other diameters available on request.
code
I.D.
[mm]
vacuum
[bar]
IV-ALBERT-200
IV-ALBERT-250
IV-ALBERT-300
IV-ALBERT-350
IV-ALBERT-450
200
254
300
350
450
0,9
0,9
0,9
0,9
0,9
bending
radius
[mm]
2200
2500
3000
4300
5300
weight
[kg/m]
19
27
38
50
63
standard
length
[m]
12
12
12
12
12
111
INDUSTRIAL HOSES - ducting and ventilation

Hoses description
Ducting hoses are very lightweight and flexible, designed to transfer gases, chemical fumes, dust, sawdust,
dry and loose or highly abrasive products. Applications where ducting hoses are used usually demands suction
(vacuum). However some applications demand pressure transfer e.g. to blow air. Ducting hoses available at TUBES
INTERNATIONAL can be divided into four groups:
Resistant to abrasion (from P2PU to OREGON PU)
Lightweight, flexible hoses made of PU, reinforced with steel wire helix, designed to extract and transfer dry and
loose materials, dust and sawdust. The abrasive properties of a transferred medium determine the wall thickness
of hose that is to be selected from our offer.
Available as an antistatic (AS) or food quality version. Widely used in woodworking, metalworking, plastic, food
and many others fields of industry.
Resistant to high temperature (from Vena HT to GRIPFLEX 1100)
Highly flexible and lightweight hoses designed to remove fumes, air, exhaust and gases at extremely high
temperature. Made of Kevlar fabric or silicone-coated fiberglass fabric and reinforced with steel wire helix.
Widely used in metallurgical, automotive, aircraft and shipbuilding industry.
Resistant to chemical substances (from P2PE to P2SP)
Lightweight, flexible hoses designed to remove aggressive fumes of chemical substances, solvents and gases. Made
of such materials as: polyethylene or PTFE-coated fabric. Reinforced with steel wire helix. The majority of hoses is
available as an antistatic or electrically conductive version. Indispensable in chemical and petrochemical industry.
Special applications (from P2HL to KEHRFLEX)
Special hoses for such applications as e.g. blowing of hot and cold air into buildings and tents, removal of welding
fumes, hoses for industrial vacuum cleaners or road-sweeping machines.
Assembly of ducting hoses
Ducting hoses offered by TUBES INTERNATIONAL can be easily assembled using a system of connectors for
ducting hoses (see: CONNECTORS FOR DUCTING HOSES at the end of this chapter) and appropriate clamps
(see: HOSE CONNECTORS). It is recommended to assemble ducting hoses with TORRO SPIRO (right hand)
worm drive bridge hose clamp, except for Clip-type hoses (KEVLAR SI CL, Silicone CL, TEFLON CL, GRIPFLEX)
that require (left hand) bridge clamps.
Example: assembly with TORRO SPIRO worm drive bridge hose clamps
SC-P2SP-080 ducting hose assembled with 90 elbow, code: KS-KSBB90-080-OC using TORRO SPIRO worm
drive bridge hose clamp, diameter range: 70 90 mm, code: VA-TSP-090127/W4.
112

Construction of ducting hoses:
Ducting hoses are made of a layer of thermoplastic material (e.g. polyurethane) or fabric (e.g. polyester) coated
with polymeric material (e.g. silicone). A helix made of steel wire, steel strip or plastic ensures resistance to vacuum.
The resistance to vacuum is determined by the diameter of a wire (steel strip), whereas the resistance to abrasion
by the type and thickness of the material of a hose wall.
The most common hose construction:
P7NPU,
P7MPU
P2PU, P2PE,
P2SP, P2HL,
P2A1000,
P1NPU SE-A
overlapping hose material,

steel wire helix
P1NPU
externally overlapping hose material,

steel wire helix embedded in hose material
CLIP type hoses:
KEVLAR SI CL
Silicone CL
TEFLON CL
GRIPFLEX
overlapping hose material,

PVC-coated steel wire helix
P7LPU,
P1VPU SE-A,
P1SPU SE-A
hose material overlapping under U-shape steel wear strip

profile (clip), with steel wire inside the profile
P-G-EX 1
internally overlapping hose material,

steel wire helix embedded in hose material
P3PU,
P3SPU
overlapping hose material, steel wire helix

(P3PU: PVC-coated helix wire)
internally overlapping hose material,

polyamide helix protected by fabric wear strip
PLS
hose material - fabric tube,

external steel wire helix protected by wear strip
113
P 2 PU
Transparent polyester-polyurethane
(standard and AS version)
Transparent polyether-polyurethane
(AE version)
Wall thickness: 0,4 mm
Material:
Characteristics: Lightweight, highly flexible hose designed to transport fumes of solvents, oils, dust, sawdust,
loose and dry materials, etc. Widely used in construction, woodworking and food industry. Other
diameters available in the range of 20 800 mm.
AE version - resistant to hydrolysis and microbes, compliant with FDA regulations and EU
Directives.
AS version - antistatic (R<108 ).
code
I.D.
[mm]
wire
[mm]
SC-P2PU-025
SC-P2PU-030
SC-P2PU-040
SC-P2PU-050
SC-P2PU-060
SC-P2PU-065
SC-P2PU-070
SC-P2PU-075
SC-P2PU-080
SC-P2PU-085
SC-P2PU-090
SC-P2PU-100
SC-P2PU-110
SC-P2PU-120
SC-P2PU-125
SC-P2PU-130
SC-P2PU-140
SC-P2PU-150
SC-P2PU-160
SC-P2PU-170
SC-P2PU-175
SC-P2PU-180
SC-P2PU-190
SC-P2PU-200
SC-P2PU-225
SC-P2PU-220
SC-P2PU-250
SC-P2PU-275
SC-P2PU-300
SC-P2PU-305
SC-P2PU-320
SC-P2PU-350
SC-P2PU-400
SC-P2PU-450
SC-P2PU-500
25
30
40
50
60
65
70
75
80
85
90
100
110
120
125
130
140
150
160
170
175
180
190
200
225
220
250
275
300
305
320
350
400
450
500
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
2
2
2
2
2
2
2
2
2
2
2
2
Code example for AE version: SC-P2PUAE-025

AS version: SC-P2PUAS-025
114
working
pressure
[bar]
0,65
0,60
0,50
0,40
0,40
0,35
0,35
0,30
0,28
0,26
0,24
0,20
0,20
0,20
0,20
0,18
0,15
0,10
0,10
0,09
0,09
0,08
0,08
0,08
0,05
0,05
0,05
0,03
0,03
0,03
0,03
0,02
0,02
0,01
0,01
vacuum
[bar]
0,30
0,30
0,25
0,20
0,16
0,14
0,14
0,10
0,10
0,09
0,09
0,09
0,08
0,08
0,08
0,08
0,07
0,06
0,06
0,05
0,05
0,05
0,05
0,05
0,04
0,04
0,04
0,04
0,03
0,03
0,03
0,02
0,02
0,01
0,01
bending
radius
[mm]
18
21
28
35
42
46
49
53
56
60
62
70
77
79
88
92
97
105
112
117
123
131
134
140
158
161
175
190
210
229
236
245
280
315
350
weight
[kg/m]
0,13
0,17
0,23
0,30
0,34
0,37
0,40
0,43
0,46
0,47
0,49
0,51
0,55
0,60
0,65
0,69
0,71
0,78
0,81
0,88
0,90
0,98
1,02
1,05
1,09
1,12
1,25
1,40
1,55
1,57
1,69
1,80
2,10
2,35
2,62
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
P 1 N PU
Transparent polyether- polyurethane
( AE and SAM version)
Wall thickness: 0,5 mm (0,6 mm from 100 mm)
Reinforcement: PVC-coated steel wire helix
Material:
Characteristics: Lightweight, flexible, non-toxic hose designed to convey fumes of solvents, oils and other slightly
aggressive media. Suitable for vacuum transfer of light granules. High abrasion resistance.
Other diameters available in the range of 10 408 mm.
Directives.
SAM version - electrically conductive (R<104 ), colour: black.
code
I.D.
[mm]
wire
[mm]
SC-P1NPU-013
SC-P1NPU-020
SC-P1NPU-025
SC-P1NPU-030
SC-P1NPU-040
SC-P1NPU-045
SC-P1NPU-050
SC-P1NPU-060
SC-P1NPU-070
SC-P1NPU-075
SC-P1NPU-080
SC-P1NPU-090
SC-P1NPU-100
SC-P1NPU-110
SC-P1NPU-120
SC-P1NPU-125
SC-P1NPU-130
SC-P1NPU-140
SC-P1NPU-150
SC-P1NPU-160
SC-P1NPU-170
SC-P1NPU-175
SC-P1NPU-180
SC-P1NPU-200
SC-P1NPU-225
SC-P1NPU-250
SC-P1NPU-275
SC-P1NPU-300
SC-P1NPU-325
SC-P1NPU-350
SC-P1NPU-375
SC-P1NPU-400
13
20
25
30
40
45
50
60
70
75
80
90
100
110
120
125
130
140
150
160
170
175
180
200
225
250
275
300
325
350
375
400
0,8
1
1
1
1
1
1
1,5
1,5
1,5
1,5
1,5
1,8
1,8
1,8
1,8
1,8
1,8
1,8
2
2
2
2
2
2
2,2
2,2
2,2
2,2
2,2
2,2
2,2
working
pressure
[bar]
2,00
1,80
1,65
1,50
1,40
1,30
1,30
1,10
0,90
0,80
0,70
0,60
0,60
0,60
0,50
0,40
0,30
0,30
0,25
0,25
0,25
0,25
0,20
0,20
0,20
0,15
0,15
0,12
0,12
0,10
0,08
0,08
vacuum
[bar]
0,50
0,45
0,40
0,35
0,30
0,28
0,26
0,25
0,22
0,20
0,18
0,15
0,15
0,15
0,15
0,12
0,12
0,12
0,10
0,10
0,10
0,10
0,09
0,09
0,09
0,08
0,06
0,06
0,05
0,04
0,03
0,02
bending
radius
[mm]
13
20
25
30
40
45
50
60
70
75
80
90
100
100
120
125
130
140
150
160
170
175
180
200
225
250
275
300
325
350
375
400
weight
[kg/m]
0,10
0,15
0,16
0,18
0,22
0,25
0,28
0,49
0,53
0,61
0,66
0,72
0,79
0,79
0,85
0,98
1,02
1,10
1,21
1,32
1,40
1,46
1,50
1,67
1,88
2,04
2,24
2,45
2,65
2,85
3,05
3,26
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Code example for AE version: SC-P1NPUAE-013

AS version: SC-P1NPUAS-013

SAM version: SC-P1NPUSAM-013
115
P 1 N PU SE-A
Material:
Wall thickness:
Reinforcement:
Working temp.:
0,5 mm (0,6 mm from 60 mm)
Steel wire helix
From -40C to +100C
Characteristics: Lightweight, flexible hose designed for suction of dust and tiny particles. Widely used in
woodworking and furniture industry. Excellent abrasion resistance. Flame retardant, compliant
with DIN 4102 B1. According to BGI 739 recommendations, the hose is electrically conductive
only when the helix is grounded. Other diameters available in the range of 20 408 mm.
AE version - resistant to hydrolysis and microbes.
code
I.D.
[mm]
wire
[mm]
SC-P1NPUSEA-020
SC-P1NPUSEA-025
SC-P1NPUSEA-030
SC-P1NPUSEA-032
SC-P1NPUSEA-035
SC-P1NPUSEA-038
SC-P1NPUSEA-040
SC-P1NPUSEA-050
SC-P1NPUSEA-060
SC-P1NPUSEA-070
SC-P1NPUSEA-075
SC-P1NPUSEA-080
SC-P1NPUSEA-090
SC-P1NPUSEA-100
SC-P1NPUSEA-102
SC-P1NPUSEA-110
SC-P1NPUSEA-120
SC-P1NPUSEA-125
SC-P1NPUSEA-127
SC-P1NPUSEA-130
SC-P1NPUSEA-140
SC-P1NPUSEA-150
SC-P1NPUSEA-152
SC-P1NPUSEA-160
SC-P1NPUSEA-170
SC-P1NPUSEA-175
SC-P1NPUSEA-180
SC-P1NPUSEA-200
SC-P1NPUSEA-215
SC-P1NPUSEA-225
SC-P1NPUSEA-250
SC-P1NPUSEA-275
SC-P1NPUSEA-300
SC-P1NPUSEA-350
SC-P1NPUSEA-400
20
25
30
32
35
38
40
50
60
70
75
80
90
100
102
110
120
125
127
130
140
150
152
160
170
175
180
200
215
225
250
275
300
350
400
1
1
1
1
1
1
1
1
1,5
1,5
1,5
1,5
1,5
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
2
2
2
2
2
2
2
2,2
2,2
2,2
2,2
2,2
working
pressure
[bar]
1,90
1,70
1,65
1,60
1,50
1,50
1,40
1,30
1,10
0,90
0,80
0,80
0,70
0,60
0,60
0,50
0,45
0,40
0,40
0,30
0,30
0,25
0,25
0,22
0,22
0,22
0,22
0,20
0,20
0,15
0,15
0,15
0,12
0,10
0,08
Code example for AE version: SC-P1NPUAESEA-020
116
vacuum
[bar]
0,55
0,45
0,45
0,42
0,35
0,30
0,30
0,28
0,25
0,22
0,20
0,20
0,16
0,15
0,15
0,14
0,14
0,12
0,12
0,12
0,12
0,10
0,10
0,10
0,10
0,10
0,10
0,09
0,09
0,09
0,08
0,06
0,06
0,04
0,02
bending
radius
[mm]
20
25
30
32
35
38
40
50
60
70
75
80
90
100
100
100
120
125
125
130
140
150
150
160
170
175
180
200
200
225
250
275
300
350
400
weight
[kg/m]
0,14
0,17
0,19
0,20
0,21
0,23
0,25
0,31
0,52
0,60
0,65
0,68
0,73
0,83
0,86
0,92
0,95
1,03
1,07
1,10
1,12
1,24
1,28
1,35
1,40
1,46
1,51
1,68
1,81
1,90
1,97
2,24
2,36
2,75
3,14
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
P 7 L PU
(AE version)
Material:
Characteristics: Robust, smooth bore hose designed to extract and transport highly abrasive materials. Nontoxic and oil resistant. Widely used in woodworking, metalworking and plastic industry. Other
Directives
code
I.D.
[mm]
SC-P7LPU-030
SC-P7LPU-040
SC-P7LPU-050
SC-P7LPU-060
SC-P7LPU-065
SC-P7LPU-070
SC-P7LPU-080
SC-P7LPU-090
SC-P7LPU-100
SC-P7LPU-110
SC-P7LPU-120
SC-P7LPU-125
SC-P7LPU-130
SC-P7LPU-140
SC-P7LPU-150
SC-P7LPU-160
SC-P7LPU-180
SC-P7LPU-200
SC-P7LPU-215
SC-P7LPU-220
SC-P7LPU-225
SC-P7LPU-250
SC-P7LPU-300
30
40
50
60
65
70
80
90
100
110
120
125
130
140
150
160
180
200
215
220
225
250
300
working
pressure
[bar]
1,30
1,15
1,00
1,00
0,90
0,80
0,80
0,60
0,60
0,50
0,50
0,40
0,40
0,40
0,38
0,35
0,30
0,26
0,25
0,20
0,20
0,20
0,15
vacuum
[bar]
0,40
0,30
0,26
0,25
0,20
0,20
0,20
0,18
0,18
0,15
0,15
0,10
0,10
0,10
0,10
0,08
0,07
0,05
0,05
0,04
0,04
0,04
0,02
bending
radius
[mm]
30
40
50
60
65
70
80
90
100
110
120
125
130
140
150
160
180
200
215
220
225
250
300
weight
[kg/m]
0,36
0,40
0,45
0,48
0,55
0,60
0,68
0,74
0,82
0,90
0,95
0,98
1,06
1,09
1,12
1,20
1,45
1,60
1,76
1,80
1,85
1,93
2,31
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Code example for AE version: SC-P7LPUAE-030

AS version: SC-P7LPUAS-030
117
P 1 V PU SE-A
Material:
Wall thickness:
Reinforcement:
Working temp.:
0,7 mm
Steel wire helix
From -40C to +100C
Characteristics: Flexible, oil resistant hose designed to extract highly abrasive materials. Widely used in
woodworking and furniture industry. Flame retardant, compliant with DIN 4102 B1. According to
BGI 739 recommendations, the hose is electrically conductive only when the helix is grounded.
code
I.D.
[mm]
SC-P1VPUSEA-030
SC-P1VPUSEA-040
SC-P1VPUSEA-050
SC-P1VPUSEA-060
SC-P1VPUSEA-080
SC-P1VPUSEA-100
SC-P1VPUSEA-120
SC-P1VPUSEA-140
SC-P1VPUSEA-150
SC-P1VPUSEA-160
SC-P1VPUSEA-180
SC-P1VPUSEA-200
SC-P1VPUSEA-215
SC-P1VPUSEA-225
SC-P1VPUSEA-250
SC-P1VPUSEA-300
SC-P1VPUSEA-350
SC-P1VPUSEA-400
30
40
50
60
80
100
120
140
150
160
180
200
215
225
250
300
350
400
working
pressure
[bar]
1,30
1,15
1,00
1,00
0,80
0,60
0,50
0,40
0,38
0,35
0,30
0,25
0,25
0,20
0,20
0,15
0,13
0,10
Code example for AE version: SC-P1VPUAESEA-030
118
vacuum
[bar]
0,30
0,40
0,25
0,25
0,20
0,18
0,15
0,10
0,10
0,08
0,07
0,05
0,05
0,04
0,04
0,02
0,01
0,01
bending
radius
[mm]
30
40
50
60
80
100
120
140
150
160
180
200
215
225
250
300
350
400
weight
[kg/m]
0,25
0,40
0,45
0,48
0,65
0,84
0,95
1,06
1,12
1,20
1,45
1,50
1,76
1,85
1,93
2,31
2,50
2,85
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
P 1 S PU SE-A
Material:
Wall thickness:
Reinforcement:
Working temp.:
0,9 mm
Steel wire helix
From -40C to +100C
Characteristics: Flexible, oil resistant hose designed to extract highly abrasive materials. Widely used in
woodworking and furniture industry. Flame retardant, compliant with DIN 4102 B1. According to
BGI 739 recommendations, the hose is electrically conductive only when the helix is grounded.
code
I.D.
[mm]
SC-P1SPUSEA-040
SC-P1SPUSEA-050
SC-P1SPUSEA-060
SC-P1SPUSEA-080
SC-P1SPUSEA-100
SC-P1SPUSEA-120
SC-P1SPUSEA-140
SC-P1SPUSEA-150
SC-P1SPUSEA-160
SC-P1SPUSEA-180
SC-P1SPUSEA-200
SC-P1SPUSEA-215
SC-P1SPUSEA-225
SC-P1SPUSEA-250
SC-P1SPUSEA-300
SC-P1SPUSEA-350
SC-P1SPUSEA-400
40
50
60
80
100
120
140
150
160
180
200
215
225
250
300
350
400
working
pressure
[bar]
1,20
1,15
1,10
1,00
0,65
0,60
0,50
0,40
0,35
0,30
0,25
0,25
0,20
0,20
0,15
0,13
0,10
vacuum
[bar]
0,40
0,25
0,25
0,20
0,18
0,15
0,10
0,10
0,08
0,07
0,05
0,05
0,04
0,04
0,02
0,01
0,01
bending
radius
[mm]
46
55
65
85
106
126
146
158
168
188
208
224
232
260
310
360
410
weight
[kg/m]
0,42
0,48
0,54
0,72
1,02
1,15
1,25
1,32
1,41
1,75
1,94
2,08
2,18
2,42
3,15
3,82
4,31
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Code example for AE version: SC-P1SPUAESEA-040
119
P 3 PU
( AE and SAM version)
Material:
Characteristics: Flexible hose designed to extract highly abrasive materials. Widely used in woodworking,
metalworking, plastic and food industry. Other diameters available in the range of 20 500 mm.
AE - version - resistant to hydrolysis and microbes, compliant with FDA regulations and EU
Directives.
SAM version - electrically conductive (R<104 ), colour: black.
code
I.D.
[mm]
wire
[mm]
SC-P3PU-020
SC-P3PU-025
SC-P3PU-030
SC-P3PU-040
SC-P3PU-045
SC-P3PU-050
SC-P3PU-055
SC-P3PU-060
SC-P3PU-065
SC-P3PU-070
SC-P3PU-080
SC-P3PU-090
SC-P3PU-100
SC-P3PU-110
SC-P3PU-120
SC-P3PU-125
SC-P3PU-130
SC-P3PU-140
SC-P3PU-150
SC-P3PU-160
SC-P3PU-170
SC-P3PU-175
SC-P3PU-180
SC-P3PU-200
SC-P3PU-220
SC-P3PU-225
SC-P3PU-250
SC-P3PU-300
SC-P3PU-325
SC-P3PU-350
SC-P3PU-400
SC-P3PU-450
SC-P3PU-500
20
25
30
40
45
50
55
60
65
70
80
90
100
110
120
125
130
140
150
160
170
175
180
200
220
225
250
300
325
350
400
450
500
1
1
1
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
1,8
3
3
3
3
3
3
3
3
3
wall
thickness
[mm]
0,8
0,8
0,8
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
0,9
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,1
1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3
1,3
Code example for AE version: SC-P3PUAE-020

AS version:
SC-P3PUAS-020

SAM version: SC-P3PUSAM-020
120
working
pressure
[bar]
2,30
2,10
2,10
2,00
1,80
1,80
1,60
1,60
1,50
1,50
1,20
1,00
1,00
0,80
0,80
0,75
0,55
0,50
0,50
0,45
0,45
0,45
0,45
0,35
0,25
0,25
0,25
0,20
0,15
0,15
0,10
0,08
0,05
vacuum
[bar]
0,70
0,50
0,50
0,45
0,40
0,40
0,35
0,35
0,35
0,35
0,35
0,30
0,30
0,25
0,25
0,25
0,22
0,20
0,20
0,15
0,15
0,15
0,15
0,12
0,10
0,10
0,10
0,09
0,09
0,09
0,08
0,06
0,04
bending
radius
[mm]
30
38
45
60
68
75
83
90
98
105
120
135
150
165
180
185
195
210
225
240
255
260
260
300
330
338
375
450
488
525
600
675
750
weight
[kg/m]
0,17
0,21
0,25
0,35
0,39
0,44
0,49
0,53
0,58
0,62
0,77
0,88
1,02
1,12
1,22
1,28
1,32
1,38
1,46
1,56
1,64
1,70
1,80
1,94
2,20
2,32
3,15
3,78
4,10
4,41
5,04
6,71
7,20
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
P 7 N PU
Transparent polyether-polyurethane
(AE version)
Material:
Characteristics: Robust, smooth bore hose designed to extract and transport highly abrasive materials. Nontoxic and oil resistant. Widely used in woodworking, metalworking, plastic and food industry.
Directives.
code
I.D.
[mm]
SC-P7NPU-030
SC-P7NPU-032
SC-P7NPU-035
SC-P7NPU-038
SC-P7NPU-040
SC-P7NPU-045
SC-P7NPU-050
SC-P7NPU-060
SC-P7NPU-065
SC-P7NPU-070
SC-P7NPU-075
SC-P7NPU-080
SC-P7NPU-090
SC-P7NPU-100
SC-P7NPU-110
SC-P7NPU-120
SC-P7NPU-125
SC-P7NPU-140
SC-P7NPU-150
SC-P7NPU-160
SC-P7NPU-180
SC-P7NPU-170
SC-P7NPU-200
SC-P7NPU-225
SC-P7NPU-250
SC-P7NPU-300
30
32
35
38
40
45
50
60
65
70
75
80
90
100
110
120
125
140
150
160
180
170
200
225
250
300
working
pressure
[bar]
3,00
3,00
2,60
2,40
2,30
1,90
1,90
1,80
1,20
1,20
1,20
1,20
1,10
1,10
1,00
0,90
0,80
0,70
0,70
0,60
0,50
0,50
0,50
0,40
0,30
0,20
vacuum
[bar]
0,90
0,90
0,80
0,75
0,70
0,60
0,60
0,55
0,50
0,50
0,50
0,45
0,45
0,40
0,35
0,30
0,25
0,20
0,20
0,20
0,15
0,15
0,15
0,10
0,10
0,10
bending
radius
[mm]
45
48
53
57
60
68
75
90
98
105
113
120
135
150
165
180
188
210
225
240
270
255
300
338
375
450
weight
[kg/m]
0,36
0,38
0,45
0,52
0,56
0,61
0,67
0,79
0,85
0,91
0,98
1,09
1,23
1,36
1,38
1,42
1,54
1,75
1,92
2,15
2,55
2,75
2,92
3,25
3,57
4,31
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Code example for AE version: SC-P7NPUAE-030

AS version: SC-P7NPUAS-030
121
P 7 M PU
(AE and EL version)
Material:
Characteristics: Robust, flexible, smooth bore hose designed to extract and transport highly abrasive materials.
Non-toxic and oil resistant. Widely used in woodworking, metalworking, plastic and food industry.
Directives.
EL version - electrically conductive (R<104 ), colour: black.
code
I.D.
[mm]
SC-P7MPUAE-032
SC-P7MPUAE-035
SC-P7MPUAE-038
SC-P7MPUAE-040
SC-P7MPUAE-050
SC-P7MPUAE-060
SC-P7MPUAE-075
SC-P7MPUAE-080
SC-P7MPUAE-090
SC-P7MPUAE-100
SC-P7MPUAE-110
SC-P7MPUAE-120
SC-P7MPUAE-125
SC-P7MPUAE-140
SC-P7MPUAE-150
SC-P7MPUAE-160
SC-P7MPUAE-180
SC-P7MPUAE-200
SC-P7MPUAE-225
SC-P7MPUAE-250
SC-P7MPUAE-300
32
35
38
40
50
60
75
80
90
100
110
120
125
140
150
160
180
200
225
250
300
working
pressure
[bar]
3,00
2,60
2,40
2,30
1,90
1,80
1,20
1,20
1,10
1,10
1,00
0,90
0,80
0,70
0,70
0,60
0,50
0,50
0,40
0,30
0,30
Code example for AE version: SC-P7MPUAE-032

AS version: SC-P7MPUAS-032

EL version: SC-P7MPUEL-032
122
vacuum
[bar]
0,90
0,80
0,75
0,70
0,60
0,55
0,50
0,45
0,45
0,40
0,35
0,30
0,25
0,20
0,20
0,20
0,15
0,15
0,10
0,10
0,10
bending
radius
[mm]
48
53
57
60
75
90
113
120
135
150
165
180
188
210
225
240
270
300
338
375
450
weight
[kg/m]
0,38
0,45
0,52
0,56
0,67
0,79
0,98
1,09
1,23
1,36
1,38
1,42
1,54
1,75
1,82
2,15
2,55
2,92
3,25
3,57
4,31
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
P 3 S PU
(AE version)
Wall thickness: 2 mm
Material:
Characteristics: Robust, smooth bore hose designed to extract and transport highly abrasive materials. Resistant
to high vacuum pressure. Non-toxic and oil resistant. Widely used in woodworking, metalworking,
plastic and food industry. Other diameters available in the range of 25 350 mm.
Directives.
AS version - antistatic (R<108 )..
code
I.D.
[mm]
wire
[mm]
SC-P3SPU-030
SC-P3SPU-040
SC-P3SPU-045
SC-P3SPU-050
SC-P3SPU-060
SC-P3SPU-070
SC-P3SPU-075
SC-P3SPU-080
SC-P3SPU-090
SC-P3SPU-100
SC-P3SPU-110
SC-P3SPU-120
SC-P3SPU-125
SC-P3SPU-140
SC-P3SPU-150
SC-P3SPU-160
SC-P3SPU-180
SC-P3SPU-200
30
40
45
50
60
70
75
80
90
100
110
120
125
100
150
160
180
200
1,8
1,8
1,8
1,8
2
2
2
2
2
2
2
2
2
3
3
3
3
3
working
pressure
[bar]
4,60
4,20
3,80
3,80
3,30
2,70
2,70
2,40
2,10
1,90
1,50
1,45
1,45
1,25
1,25
1,15
0,95
0,95
vacuum
[bar]
0,95
0,95
0,95
0,95
0,95
0,95
0,95
0,90
0,90
0,90
0,90
0,90
0,90
0,85
0,85
0,85
0,85
0,85
bending
radius
[mm]
130
160
180
200
240
280
300
320
360
400
440
480
500
560
600
640
720
800
weight
[kg/m]
0,61
0,76
0,88
1,00
1,32
1,41
1,51
1,61
1,81
2,13
2,29
2,48
2,56
3,51
3,98
4,48
4,91
5,45
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Code example for AE version: SC-P3SPUAE-030

AS version: SC-P3SPUAS-030
123
OREGON PU
Material:
Reinforcement: PVC wire helix
Characteristics: Lightweight, flexible and smooth bore hose designed to extract dust, yarn, polluted air, powders,
granules, etc. Widely used in woodworking, construction and food industry. Excellent resistance
to abrasion, weather conditions and biological corrosion. Antistatic version includes copper
antistatic wire.
code
I.D.
[mm]
vacuum
[bar]
ME-OREGONPU-025
ME-OREGONPU-030
ME-OREGONPU-032
ME-OREGONPU-035
ME-OREGONPU-038
ME-OREGONPU-040
ME-OREGONPU-045
ME-OREGONPU-050
ME-OREGONPU-060
ME-OREGONPU-063
ME-OREGONPU-070
ME-OREGONPU-075
ME-OREGONPU-080
ME-OREGONPU-090
ME-OREGONPU-100
ME-OREGONPU-110
ME-OREGONPU-120
ME-OREGONPU-125
ME-OREGONPU-130
ME-OREGONPU-140
ME-OREGONPU-150
ME-OREGONPU-160
ME-OREGONPU-180
ME-OREGONPU-200
ME-OREGONPU-250
ME-OREGONPU-300
25
30
32
35
38
40
45
50
60
63
70
75
80
90
100
110
120
125
130
140
150
160
180
200
250
300
0,4
0,4
0,4
0,4
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
bending
radius
[mm]
25
30
32
35
38
40
45
50
60
63
70
75
80
90
100
110
120
125
130
140
150
160
180
200
250
300
Code example for AE version: ME-OREGONPU/AS-025
124
weight
(standard)
[kg/m]
0,15
0,16
0,18
0,20
0,25
0,28
0,32
0,39
0,44
0,47
0,60
0,60
0,62
0,75
0,85
1,05
1,10
1,17
1,28
1,40
1,45
1,70
2,00
2,18
2,96
3,70
weight
(antistatic)
[kg/m]
0,19
0,21
0,24
0,25
0,31
0,33
0,37
0,44
0,50
0,53
0,66
0,66
0,68
0,81
0,92
1,12
1,18
1,25
1,35
1,50
1,60
1,78
2,10
2,28
-
standard
length
[m]
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
10
10
10
10
VENA MT
Black Neoprene-coated fiberglass
fabric (one layer),
Reinforcement: Internal steel wire helix
Material:
Characteristics: Lightweight, extremely flexible hose designed to remove fumes, air and gases. Widely used to
transfer cool and cold air in electronic industry, plastic processing and vacuum of exhaust fumes
and welding gases. For proper hose selection please contact Sales or Technical Department
of TUBES INTERNATIONAL. Standard length: 4 m.
code
I.D.
[mm]
VN-VENA/MT-013
VN-VENA/MT-019
VN-VENA/MT-025
VN-VENA/MT-032
VN-VENA/MT-035
VN-VENA/MT-038
VN-VENA/MT-040
VN-VENA/MT-045
VN-VENA/MT-051
VN-VENA/MT-057
VN-VENA/MT-060
VN-VENA/MT-063
VN-VENA/MT-065
VN-VENA/MT-070
VN-VENA/MT-076
VN-VENA/MT-080
VN-VENA/MT-085
VN-VENA/MT-090
VN-VENA/MT-095
VN-VENA/MT-100
VN-VENA/MT-102
VN-VENA/MT-105
VN-VENA/MT-110
VN-VENA/MT-115
VN-VENA/MT-120
VN-VENA/MT-127
VN-VENA/MT-130
VN-VENA/MT-140
VN-VENA/MT-150
VN-VENA/MT-152
VN-VENA/MT-160
VN-VENA/MT-180
VN-VENA/MT-200
VN-VENA/MT-203
VN-VENA/MT-220
VN-VENA/MT-250
VN-VENA/MT-300
13
19
25
32
35
38
40
45
51
57
60
63
65
70
76
80
85
90
95
100
102
105
110
115
120
127
130
140
150
152,4
160
180
200
203
220
250
300
wall
thickness
[mm]
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
working
pressure
[bar]
1,76
1,76
1,76
1,66
1,62
1,58
1,55
1,49
1,42
1,35
1,31
1,28
1,26
1,21
1,15
1,11
1,06
1,02
0,98
0,94
0,92
0,90
0,86
0,83
0,79
0,75
0,73
0,67
0,62
0,60
0,57
0,48
0,40
0,39
0,34
0,27
0,17
vacuum
[bar]
0,54
0,54
0,54
0,50
0,48
0,47
0,46
0,43
0,41
0,38
0,37
0,36
0,35
0,33
0,31
0,30
0,28
0,27
0,25
0,24
0,24
0,23
0,22
0,20
0,19
0,18
0,17
0,16
0,14
0,14
0,13
0,10
0,08
0,08
0,07
0,05
0,03
bending
radius
[mm]
34
34
34
44
48
52
55
61
69
77
81
85
88
95
103
108
115
121
128
135
137
141
148
155
161
171
175
188
201
205
215
242
268
272
295
335
402
weight
[kg/m]
0,10
0,10
0,10
0,15
0,17
0,19
0,20
0,23
0,27
0,30
0,32
0,34
0,35
0,38
0,42
0,44
0,48
0,51
0,54
0,57
0,58
0,60
0,63
0,66
0,69
0,74
0,75
0,82
0,88
0,89
0,94
1,06
1,19
1,21
1,31
1,50
1,81
125
VENA MTD
Black Neoprene-coated fiberglass
fabric (two layers),
Reinforcement: Internal steel wire helix between
two hose layers
Material:
Characteristics: More robust version of VENA MT hose. Widely used to transfer cool and cold air in electronic
industry, plastic processing and vacuum of exhaust fumes and welding gases. For proper hose
selection please contact Sales or Technical Department of TUBES INTERNATIONAL. Standard
length: 4 m.
code
I.D.
[mm]
VN-VENA/MTD-013
VN-VENA/MTD-019
VN-VENA/MTD-025
VN-VENA/MTD-032
VN-VENA/MTD-035
VN-VENA/MTD-038
VN-VENA/MTD-040
VN-VENA/MTD-045
VN-VENA/MTD-051
VN-VENA/MTD-057
VN-VENA/MTD-060
VN-VENA/MTD-063
VN-VENA/MTD-065
VN-VENA/MTD-070
VN-VENA/MTD-076
VN-VENA/MTD-080
VN-VENA/MTD-085
VN-VENA/MTD-090
VN-VENA/MTD-095
VN-VENA/MTD-100
VN-VENA/MTD-102
VN-VENA/MTD-105
VN-VENA/MTD-110
VN-VENA/MTD-115
VN-VENA/MTD-120
VN-VENA/MTD-127
VN-VENA/MTD-130
VN-VENA/MTD-140
VN-VENA/MTD-150
VN-VENA/MTD-152
VN-VENA/MTD-160
VN-VENA/MTD-180
VN-VENA/MTD-200
VN-VENA/MTD-203
VN-VENA/MTD-220
VN-VENA/MTD-250
VN-VENA/MTD-300
13
19
25
32
35
38
40
45
51
57
60
63
65
70
76
80
85
90
95
100
102
105
110
115
120
127
130
140
150
152,4
160
180
200
203
220
250
300
126
wall
thickness
[mm]
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
working
pressure
[bar]
2,27
2,27
2,27
2,12
2,07
2,01
1,97
1,89
1,78
1,68
1,64
1,59
1,56
1,49
1,41
1,36
1,30
1,24
1,18
1,13
1,11
1,08
1,03
0,98
0,94
0,88
0,85
0,78
0,71
0,69
0,65
0,54
0,45
0,43
0,37
0,28
0,18
vacuum
[bar]
0,66
0,66
0,66
0,62
0,60
0,58
0,57
0,54
0,51
0,48
0,47
0,45
0,44
0,42
0,40
0,38
0,36
0,35
0,33
0,31
0,31
0,30
0,28
0,27
0,26
0,24
0,23
0,21
0,19
0,19
0,17
0,14
0,12
0,11
0,09
0,07
0,01
bending
radius
[mm]
38
38
38
48
53
57
60
68
77
86
91
95
98
106
115
121
128
136
143
151
154
158
166
173
181
192
196
211
226
230
241
271
302
306
332
377
452
weight
[kg/m]
0,23
0,23
0,23
0,28
0,30
0,32
0,33
0,37
0,41
0,45
0,46
0,48
0,50
0,53
0,57
0,60
0,63
0,66
0,70
0,73
0,74
0,76
0,80
0,83
0,86
0,91
0,93
0,99
1,06
1,08
1,13
1,26
1,39
1,41
1,52
1,72
2,06
VENA HT
Red, silicone-coated fiberglass fabric
(one layer)
Reinforcement: Internal steel wire helix
Material:
Characteristics: Lightweight, very flexible hose designed to remove fumes, air and gases at high temperatures.
Not recommended for heavy duty applications. For proper hose selection please contact Sales
or Technical Department of TUBES INTERNATIONAL. Standard length: 4 m.
code
I.D.
[mm]
VN-VENA/HT-025
VN-VENA/HT-028
VN-VENA/HT-030
VN-VENA/HT-032
VN-VENA/HT-035
VN-VENA/HT-038
VN-VENA/HT-040
VN-VENA/HT-045
VN-VENA/HT-050
VN-VENA/HT-055
VN-VENA/HT-060
VN-VENA/HT-063
VN-VENA/HT-065
VN-VENA/HT-070
VN-VENA/HT-075
VN-VENA/HT-076
VN-VENA/HT-080
VN-VENA/HT-085
VN-VENA/HT-090
VN-VENA/HT-095
VN-VENA/HT-100
VN-VENA/HT-102
VN-VENA/HT-105
VN-VENA/HT-110
VN-VENA/HT-115
VN-VENA/HT-120
VN-VENA/HT-127
VN-VENA/HT-130
VN-VENA/HT-140
VN-VENA/HT-150
VN-VENA/HT-152
VN-VENA/HT-160
VN-VENA/HT-170
VN-VENA/HT-180
VN-VENA/HT-200
VN-VENA/HT-203
VN-VENA/HT-220
VN-VENA/HT-250
VN-VENA/HT-254
VN-VENA/HT-300
VN-VENA/HT-305
25
28
30
32
35
38
40
45
50
55
60
63
65
70
75
76
80
85
90
95
100
102
105
110
115
120
127
130
140
150
152,4
160
170
180
200
203
220
250
254
300
305
wall
thickness
[mm]
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
O.D.
[mm]
25,6
28,6
30,6
32,6
35,6
38,6
40,6
45,6
50,6
55,6
60,6
63,6
65,6
70,6
75,6
76,6
80,6
85,6
90,6
95,6
100,6
102,6
105,6
110,6
115,6
120,6
127,6
130,6
140,6
150,6
153
160,6
170,6
180,6
200,6
203,6
220,6
250,6
254,6
300,6
305,6
working
pressure
[bar]
1,8
1,7
1,7
1,7
1,6
1,6
1,6
1,5
1,4
1,4
1,3
1,3
1,3
1,2
1,2
1,1
1,1
1,1
1,0
1,0
0,9
0,9
0,9
0,9
0,8
0,8
0,7
0,7
0,7
0,6
0,6
0,6
0,5
0,5
0,4
0,4
0,3
0,3
0,3
0,2
0,2
vacuum
[bar]
0,5
0,5
0,5
0,5
0,5
0,5
0,5
0,4
0,4
0,4
0,4
0,4
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,0
0,0
0,0
0,0
bending
radius
[mm]
34
38
41
44
48
52
55
61
68
75
81
85
88
95
101
103
108
115
121
128
135
137
141
148
155
161
171
175
188
201
205
215
228
242
268
272
295
335
340
402
409
weight
[kg/m]
0,10
0,12
0,13
0,15
0,17
0,19
0,20
0,23
0,26
0,29
0,32
0,34
0,35
0,38
0,41
0,42
0,44
0,48
0,51
0,54
0,57
0,58
0,60
0,63
0,66
0,69
0,74
0,75
0,82
0,88
0,89
0,94
1,00
1,06
1,19
1,21
1,31
1,50
1,52
1,81
1,84
127
VENA HTD
Red, silicone-coated fiberglass fabric
(two layers)
Reinforcement: Steel wire helix between two hose
layers
Material:
Characteristics: More robust version of VENA HT hose. Designed to remove fumes, air and gases at high
temperatures. Not recommended for heavy duty applications. For proper hose selection please
contact Sales or Technical Department of TUBES INTERNATIONAL. Standard length: 4 m.
code
I.D.
[mm]
VN-VENA/HTD-025
VN-VENA/HTD-028
VN-VENA/HTD-030
VN-VENA/HTD-032
VN-VENA/HTD-035
VN-VENA/HTD-038
VN-VENA/HTD-040
VN-VENA/HTD-045
VN-VENA/HTD-050
VN-VENA/HTD-055
VN-VENA/HTD-060
VN-VENA/HTD-063
VN-VENA/HTD-065
VN-VENA/HTD-070
VN-VENA/HTD-075
VN-VENA/HTD-076
VN-VENA/HTD-080
VN-VENA/HTD-085
VN-VENA/HTD-090
VN-VENA/HTD-095
VN-VENA/HTD-100
VN-VENA/HTD-102
VN-VENA/HTD-105
VN-VENA/HTD-110
VN-VENA/HTD-115
VN-VENA/HTD-120
VN-VENA/HTD-127
VN-VENA/HTD-130
VN-VENA/HTD-140
VN-VENA/HTD-150
VN-VENA/HTD-152
VN-VENA/HTD-160
VN-VENA/HTD-170
VN-VENA/HTD-180
VN-VENA/HTD-200
VN-VENA/HTD-203
VN-VENA/HTD-220
VN-VENA/HTD-250
VN-VENA/HTD-254
VN-VENA/HTD-300
VN-VENA/HTD-305
25
28
30
32
35
38
40
45
50
55
60
63
65
70
75
76
80
85
90
95
100
102
105
110
115
120
127
130
140
150
152,4
160
170
180
200
203
220
250
254
300
305
128
wall
thickness
[mm]
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
0,6
O.D.
[mm]
26,2
29,2
31,2
33,2
36,2
39,2
41,2
46,2
51,2
56,2
61,2
64,2
66,2
71,2
76,2
77,2
81,2
86,2
91,2
96,2
101,2
103,2
106,2
111,2
116,2
121,2
128,2
131,2
141,2
151,2
153,6
161,2
171,2
181,2
201,2
204,2
221,2
251,2
255,2
301,2
306,2
working
pressure
[bar]
2,3
2,2
2,2
2,1
2,1
2,0
2,0
1,9
1,8
1,7
1,6
1,6
1,6
1,5
1,4
1,4
1,4
1,3
1,2
1,2
1,1
1,1
1,1
1,0
1,0
0,9
0,9
0,9
0,8
0,7
0,7
0,6
0,6
0,5
0,4
0,4
0,4
0,3
0,3
0,2
0,2
vacuum
[bar]
0,7
0,6
0,6
0,6
0,6
0,6
0,6
0,5
0,5
0,5
0,5
0,5
0,4
0,4
0,4
0,4
0,4
0,4
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,1
0,1
0,1
0,1
0,1
0,1
0,0
0,0
bending
radius
[mm]
38
42
45
48
53
57
60
68
75
83
91
95
98
106
113
115
121
128
136
143
151
154
158
166
173
181
192
196
211
226
230
241
256
271
302
306
332
377
383
452
460
weight
[kg/m]
0,23
0,25
0,27
0,28
0,30
0,32
0,33
0,37
0,40
0,43
0,46
0,48
0,50
0,53
0,56
0,57
0,60
0,63
0,66
0,70
0,73
0,74
0,76
0,80
0,83
0,86
0,91
0,93
0,99
1,06
1,08
1,13
1,19
1,26
1,39
1,41
1,52
1,72
1,75
2,05
2,08

KEVLAR SI CL
One-side silicone-coated
Kevlar fabric
Material:
Characteristics: Lightweight, very flexible hose designed to transfer fumes and gases at high temperatures. For
proper hose selection please contact Sales or Technical Department of TUBES INTERNATIONAL.
code
I.D.
[mm]
SC-KEVLARCL-050
SC-KEVLARCL-060
SC-KEVLARCL-076
SC-KEVLARCL-080
SC-KEVLARCL-102
SC-KEVLARCL-110
SC-KEVLARCL-120
SC-KEVLARCL-127
SC-KEVLARCL-152
SC-KEVLARCL-160
SC-KEVLARCL-180
SC-KEVLARCL-203
SC-KEVLARCL-254
SC-KEVLARCL-305
SC-KEVLARCL-350
SC-KEVLARCL-407
SC-KEVLARCL-508
50
60
76
80
102
110
120
127
152
160
180
203
254
305
350
407
508
working
pressure
[bar]
0,90
0,78
0,62
0,61
0,51
0,48
0,36
0,33
0,22
0,21
0,17
0,15
0,10
0,07
0,06
0,04
0,04
vacuum
[bar]
0,32
0,22
0,14
0,12
0,08
0,06
0,05
0,05
0,04
0,03
0,02
0,02
0,01
0,01
0,01
0,01
0,01
bending
radius
[mm]
30
36
45
48
60
66
72
75
90
96
126
140
175
210
245
320
400
weight
[kg/m]
0,50
0,60
0,75
0,80
0,90
0,92
1,00
1,02
1,25
1,28
1,48
1,65
2,00
2,25
2,70
3,15
4,20
standard
length
[m]
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
Silicone CL
Silver-grey silicone-coated
fiberglass fabric
Material:
Characteristics: Lightweight, very flexible hose designed to transfer fumes and gases at high temperatures. For
proper hose selection please contact Sales or Technical Department of TUBES INTERNATIONAL.
code
I.D.
[mm]
SC-SILICONCL-060
SC-SILICONCL-076
SC-SILICONCL-080
SC-SILICONCL-102
SC-SILICONCL-110
SC-SILICONCL-120
SC-SILICONCL-127
SC-SILICONCL-152
SC-SILICONCL-160
SC-SILICONCL-180
SC-SILICONCL-203
SC-SILICONCL-254
SC-SILICONCL-305
SC-SILICONCL-350
SC-SILICONCL-407
SC-SILICONCL-508
60
76
80
102
110
120
127
152
160
180
203
254
305
350
407
508
working
pressure
[bar]
0,68
0,47
0,43
0,30
0,25
0,22
0,21
0,16
0,14
0,12
0,10
0,07
0,05
0,04
0,03
0,02
vacuum
[bar]
0,22
0,14
0,13
0,08
0,07
0,06
0,05
0,04
0,03
0,02
0,02
0,01
0,01
0,01
0,01
0,01
bending
radius
[mm]
36
45
48
60
66
72
75
90
96
108
120
175
210
245
280
400
weight
[kg/m]
0,50
0,60
0,62
0,65
0,70
0,72
0,80
0,90
0,94
1,00
1,21
1,70
2,13
2,50
3,10
4,15
standard
length
[m]
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
129
GRIPFLEX 400
Material:
Coated fiberglass fabric
Reinforcement: Steel wire helix, steel wear strip
Characteristics: Lightweight, very flexible hose designed to transfer hot air, exhaust fumes and other emissions.
Does not contain plasticizers, silicone or halogen compounds. Good resistance to oils, nonflammable. Limited ability to bend constantly. Widely used in metallurgical industry.
code
I.D.
[mm]
TS-GRIP400-050
TS-GRIP400-060
TS-GRIP400-065
TS-GRIP400-070
TS-GRIP400-075
TS-GRIP400-080
TS-GRIP400-090
TS-GRIP400-100
TS-GRIP400-110
TS-GRIP400-120
TS-GRIP400-125
TS-GRIP400-130
TS-GRIP400-140
TS-GRIP400-150
TS-GRIP400-160
TS-GRIP400-170
TS-GRIP400-175
TS-GRIP400-180
TS-GRIP400-200
TS-GRIP400-215
TS-GRIP400-225
TS-GRIP400-250
TS-GRIP400-275
TS-GRIP400-300
TS-GRIP400-315
TS-GRIP400-325
TS-GRIP400-350
TS-GRIP400-375
TS-GRIP400-400
TS-GRIP400-450
TS-GRIP400-500
TS-GRIP400-600
TS-GRIP400-700
TS-GRIP400-800
TS-GRIP400-900
50
60
65
70
75
80
90
100
110
120
125
130
140
150
160
170
175
180
200
215
225
250
275
300
315
325
350
375
400
450
500
600
700
800
900
130
working
pressure
[bar]
0,850
0,680
0,590
0,530
0,470
0,430
0,355
0,300
0,258
0,224
0,210
0,197
0,175
0,157
0,140
0,128
0,123
0,117
0,099
0,088
0,082
0,069
0,059
0,052
0,048
0,046
0,040
0,036
0,033
0,027
0,023
0,017
0,014
0,011
0,009
vacuum
[bar]
0,352
0,292
0,245
0,209
0,176
0,154
0,138
0,110
0,088
0,073
0,062
0,055
0,052
0,046
0,040
0,035
0,031
0,029
0,027
0,022
0,020
0,018
0,015
0,012
0,010
0,009
0,008
0,007
0,006
0,005
0,004
0,003
0,002
0,002
0,001
bending
radius
[mm]
30
36
39
42
45
48
54
60
66
72
75
78
84
90
96
102
105
108
120
129
135
175
193
210
221
228
245
263
280
360
400
480
560
640
720
weight
[kg/m]
0,50
0,60
0,70
0,70
0,80
0,80
0,80
0,80
0,90
0,90
1,00
1,00
1,00
1,10
1,10
1,10
1,30
1,30
1,50
1,60
1,80
2,00
2,40
2,60
2,60
2,80
3,10
3,60
3,90
4,50
5,10
6,40
7,50
8,60
9,80
standard
length
[m]
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
GRIPFLEX 450
Internal layer:
Cover:
Reinforcement:
Working temp.:
Fiberglass fabric
Silicone-coated fiberglass fabric
Steel wire helix, steel wear strip
From -60C to +450C
Resistant to oils and UV, non-flammable. Widely used in metallurgical, automotive and aircraft
industry.
code
I.D.
[mm]
TS-GRIP450-050
TS-GRIP450-060
TS-GRIP450-065
TS-GRIP450-070
TS-GRIP450-075
TS-GRIP450-080
TS-GRIP450-090
TS-GRIP450-100
TS-GRIP450-110
TS-GRIP450-120
TS-GRIP450-125
TS-GRIP450-130
TS-GRIP450-140
TS-GRIP450-150
TS-GRIP450-160
TS-GRIP450-170
TS-GRIP450-175
TS-GRIP450-180
TS-GRIP450-200
TS-GRIP450-215
TS-GRIP450-225
TS-GRIP450-250
TS-GRIP450-275
TS-GRIP450-300
TS-GRIP450-315
TS-GRIP450-325
TS-GRIP450-350
TS-GRIP450-375
TS-GRIP450-400
TS-GRIP450-450
TS-GRIP450-500
TS-GRIP450-600
TS-GRIP450-700
TS-GRIP450-800
TS-GRIP450-900
50
60
65
70
75
80
90
100
110
120
125
130
140
150
160
170
175
180
200
215
225
250
275
300
315
325
350
375
400
450
500
600
700
800
900
working
pressure
[bar]
0,900
0,780
0,680
0,670
0,620
0,610
0,560
0,510
0,480
0,360
0,330
0,280
0,250
0,220
0,210
0,190
0,185
0,172
0,148
0,128
0,115
0,100
0,080
0,070
0,062
0,059
0,056
0,050
0,047
0,045
0,043
0,039
0,031
0,022
0,016
vacuum
[bar]
0,440
0,306
0,261
0,225
0,196
0,172
0,136
0,110
0,092
0,077
0,071
0,065
0,057
0,049
0,043
0,039
0,037
0,035
0,028
0,025
0,022
0,018
0,015
0,013
0,011
0,011
0,009
0,008
0,007
0,006
0,005
0,004
0,003
0,003
0,002
bending
radius
[mm]
30
36
39
42
45
48
54
60
66
72
75
78
84
90
96
102
105
108
120
129
135
175
193
210
221
228
245
263
280
360
400
480
560
640
720
weight
[kg/m]
0,60
0,70
0,80
0,90
1,00
1,00
1,20
1,30
1,30
1,40
1,40
1,60
1,60
1,80
1,80
2,00
2,10
2,10
2,30
2,40
2,40
2,60
2,70
2,75
2,80
2,90
3,05
3,20
3,40
4,00
4,50
5,60
6,60
7,60
8,60
standard
length
[m]
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
131
GRIPFLEX 650
Two-layer fiberglass fabric with
stainless steel yarn woven through
Reinforcement: Steel wire helix, steel wear strip
Material:
Good resistance to oils, UV and vibration; non-flammable, silicone-free. Limited ability to
constant bending. Widely used in metallurgical, automotive, aircraft and shipbuilding industry.
Intended for vacuum only.
code
I.D.
[mm]
TS-GRIP650-060
TS-GRIP650-065
TS-GRIP650-070
TS-GRIP650-075
TS-GRIP650-080
TS-GRIP650-090
TS-GRIP650-100
TS-GRIP650-110
TS-GRIP650-120
TS-GRIP650-125
TS-GRIP650-130
TS-GRIP650-140
TS-GRIP650-150
TS-GRIP650-160
TS-GRIP650-170
TS-GRIP650-175
TS-GRIP650-180
TS-GRIP650-200
TS-GRIP650-215
TS-GRIP650-225
TS-GRIP650-250
TS-GRIP650-275
TS-GRIP650-300
TS-GRIP650-315
TS-GRIP650-325
TS-GRIP650-350
TS-GRIP650-375
TS-GRIP650-400
TS-GRIP650-450
TS-GRIP650-500
TS-GRIP650-600
TS-GRIP650-700
TS-GRIP650-800
TS-GRIP650-900
60
65
70
75
80
90
100
110
120
125
130
140
150
160
170
175
180
200
215
225
250
275
300
315
325
350
375
400
450
500
600
700
800
900
132
working
pressure
[bar]
-
vacuum
[bar]
0,320
0,300
0,270
0,260
0,230
0,210
0,170
0,140
0,120
0,110
0,100
0,090
0,080
0,070
0,060
0,060
0,050
0,040
0,040
0,040
0,030
0,020
0,020
0,020
0,020
0,015
0,010
0,010
0,009
0,007
0,005
0,004
0,003
0,003
bending
radius
[mm]
36
39
42
45
48
54
60
66
72
75
78
84
90
96
102
105
108
120
129
135
175
193
210
221
228
245
263
280
360
400
480
560
640
720
weight
[kg/m]
1,35
1,45
1,50
1,65
1,80
1,80
1,80
1,90
2,00
2,10
2,10
2,10
2,20
2,40
2,50
2,80
2,80
3,00
3,20
3,40
3,55
4,20
4,40
4,50
4,70
5,00
5,50
5,90
6,70
7,40
9,00
10,10
11,60
13,20
standard
length
[m]
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
GRIPFLEX 1100
Coated fiberglass fabric (outer)
Insulation fabric (middle)
Stainless steel fabric (inner)
Reinforcement: External AISI 409 steel helix
Material:
(three layers)
Good resistance to oils and UV; non-flammable, silicone-free and halogen-free. Limited ability
to constant bending. Widely used in metallurgical, automotive, aircraft and shipbuilding industry.
Intended for vacuum only.
code
I.D.
[mm]
TS-GRIP1100-075
TS-GRIP1100-080
TS-GRIP1100-090
TS-GRIP1100-100
TS-GRIP1100-110
TS-GRIP1100-120
TS-GRIP1100-125
TS-GRIP1100-130
TS-GRIP1100-140
TS-GRIP1100-150
TS-GRIP1100-160
TS-GRIP1100-170
TS-GRIP1100-175
TS-GRIP1100-180
TS-GRIP1100-200
TS-GRIP1100-215
TS-GRIP1100-225
TS-GRIP1100-250
TS-GRIP1100-275
TS-GRIP1100-300
TS-GRIP1100-315
TS-GRIP1100-325
TS-GRIP1100-350
TS-GRIP1100-375
TS-GRIP1100-400
TS-GRIP1100-450
TS-GRIP1100-500
TS-GRIP1100-600
TS-GRIP1100-700
TS-GRIP1100-800
TS-GRIP1100-900
75
80
90
100
110
120
125
130
140
150
160
170
175
180
200
215
225
250
275
300
315
325
350
375
400
450
500
600
700
800
900
working
pressure
[bar]
-
vacuum
[bar]
0,306
0,278
0,251
0,202
0,167
0,142
0,126
0,119
0,106
0,092
0,081
0,071
0,068
0,063
0,051
0,046
0,042
0,035
0,028
0,023
0,022
0,021
0,018
0,016
0,014
0,011
0,009
0,006
0,005
0,004
0,003
bending
radius
[mm]
45
48
54
60
66
72
75
78
84
90
96
102
105
108
120
129
135
175
193
210
221
228
245
263
280
360
400
480
560
640
720
weight
[kg/m]
1,10
1,20
1,20
1,20
1,30
1,30
1,50
1,50
1,50
1,70
1,70
1,70
2,00
2,00
2,20
2,40
2,70
3,00
3,50
3,90
4,00
4,20
4,60
5,40
5,80
6,70
7,60
9,60
11,10
12,80
14,50
standard
length
[m]
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
133
P 2 PE
Material:
Wall thickness:
Reinforcement:
Working temp.:
Translucent polyethylene
0,4 mm
Steel wire helix
From -40C to +60C
Characteristics: Lightweight, very flexible hose designed to transfer highly aggressive chemical fumes, solvents
and gases. Mainly used in chemical industry. Other diameters available in the range of 40
610 mm.
code
I.D.
[mm]
wire
[mm]
SC-P2PE-050
SC-P2PE-060
SC-P2PE-070
SC-P2PE-075
SC-P2PE-080
SC-P2PE-090
SC-P2PE-100
SC-P2PE-110
SC-P2PE-120
SC-P2PE-125
SC-P2PE-130
SC-P2PE-140
SC-P2PE-150
SC-P2PE-160
SC-P2PE-170
SC-P2PE-175
SC-P2PE-180
SC-P2PE-200
SC-P2PE-250
SC-P2PE-300
SC-P2PE-350
SC-P2PE-400
SC-P2PE-450
SC-P2PE-500
50
60
70
75
80
90
100
110
120
125
130
140
150
160
170
175
180
200
250
300
350
400
450
500
1
1
1
1
1
1
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
2
2
2
2
2
2
2
2
2
2
Code example for EL version: SC-P2PEEL-040
134
working
pressure
[bar]
0,40
0,40
0,30
0,30
0,30
0,25
0,20
0,20
0,20
0,10
0,10
0,10
0,09
0,09
0,09
0,08
0,08
0,05
0,03
0,02
0,02
0,02
0,01
0,01
vacuum
[bar]
0,16
0,16
0,12
0,10
0,10
0,09
0,09
0,08
0,08
0,08
0,06
0,06
0,06
0,05
0,05
0,05
0,05
0,05
0,04
0,03
0,02
0,02
0,01
0,01
bending
radius
[mm]
35
42
49
53
56
63
70
78
85
85
92
99
100
113
120
123
127
140
175
210
245
280
315
350
weight
[kg/m]
0,14
0,17
0,19
0,21
0,23
0,26
0,29
0,32
0,35
0,36
0,38
0,41
0,43
0,51
0,59
0,66
0,71
0,81
1,02
1,22
1,42
1,63
1,83
2,03
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
GRIPFLEX HYTEF
Internal layer:
Cover:
Reinforcement:
Working temp.:
Teflon-film
Hypalon-coated polyester fabric
External steel wire helix
From -40C to +175C
Characteristics: Lightweight, extremely flexible hose designed to transfer highly aggressive chemical fumes and
gases. Resistant to UV, ozone, weather conditions and non-flammable. Widely used in paper
making, pharmaceutical and chemical industry.
EL version - electrically conductive (R<104 ), black Teflon-film.
code
I.D.
[mm]
TS-HYTEF-050
TS-HYTEF-060
TS-HYTEF-065
TS-HYTEF-070
TS-HYTEF-075
TS-HYTEF-080
TS-HYTEF-090
TS-HYTEF-100
TS-HYTEF-110
TS-HYTEF-120
TS-HYTEF-125
TS-HYTEF-130
TS-HYTEF-140
TS-HYTEF-150
TS-HYTEF-160
TS-HYTEF-170
TS-HYTEF-175
TS-HYTEF-180
TS-HYTEF-200
TS-HYTEF-215
TS-HYTEF-225
TS-HYTEF-250
TS-HYTEF-275
TS-HYTEF-300
TS-HYTEF-315
TS-HYTEF-325
TS-HYTEF-350
TS-HYTEF-375
TS-HYTEF-400
TS-HYTEF-450
TS-HYTEF-500
TS-HYTEF-600
TS-HYTEF-700
TS-HYTEF-800
TS-HYTEF-900
50
60
65
70
75
80
90
100
110
120
125
130
140
150
160
170
175
180
200
215
225
250
275
300
315
325
350
375
400
450
500
600
700
800
900
working
pressure
[bar]
0,900
0,780
0,680
0,670
0,620
0,610
0,560
0,510
0,480
0,360
0,330
0,280
0,250
0,220
0,210
0,190
0,185
0,172
0,148
0,128
0,115
0,100
0,080
0,070
0,062
0,059
0,056
0,050
0,047
0,045
0,043
0,039
0,031
0,022
0,016
vacuum
[bar]
0,440
0,306
0,261
0,225
0,196
0,172
0,136
0,110
0,092
0,077
0,071
0,065
0,057
0,049
0,043
0,039
0,037
0,035
0,028
0,025
0,022
0,018
0,015
0,013
0,011
0,011
0,009
0,008
0,007
0,006
0,005
0,003
0,002
0,002
0,001
bending
radius
[mm]
30
36
39
42
45
48
54
60
66
72
75
78
84
90
96
102
105
108
120
129
135
175
193
210
221
228
245
263
280
360
400
480
560
640
720
weight
[kg/m]
0,50
0,60
0,70
0,70
0,80
0,80
0,90
1,00
1,10
1,10
1,20
1,20
1,30
1,30
1,30
1,40
1,40
1,40
1,60
1,80
2,00
2,10
2,30
2,40
2,60
2,80
3,30
3,50
3,80
4,20
4,70
5,90
6,90
7,60
8,20
standard
length
[m]
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
2 10
135
TEFLON CL
Material:
Wall thickness:
Reinforcement:
Working temp.:
Brown, PTFE-coated fiberglass fabric

0,12 mm (0,15 mm for EL version)
Steel wire helix, steel wear strip
From -150C to +250C
Characteristics: Lightweight, very flexible hose designed to transfer chemically aggressive fumes and gases.
code
I.D.
[mm]
SC-TEFLON-050
SC-TEFLON-060
SC-TEFLON-076
SC-TEFLON-080
SC-TEFLON-102
SC-TEFLON-110
SC-TEFLON-120
SC-TEFLON-127
SC-TEFLON-152
SC-TEFLON-160
SC-TEFLON-180
SC-TEFLON-203
SC-TEFLON-254
SC-TEFLON-305
SC-TEFLON-350
SC-TEFLON-407
SC-TEFLON-508
50
60
76
80
102
110
120
127
152
160
180
203
254
305
350
407
508
working
pressure
[bar]
0,85
0,68
0,47
0,43
0,30
0,25
0,22
0,21
0,16
0,14
0,12
0,10
0,07
0,05
0,04
0,03
0,02
vacuum
[bar]
0,32
0,22
0,14
0,12
0,08
0,07
0,06
0,05
0,04
0,03
0,02
0,02
0,01
0,01
0,01
0,01
0,01
bending
radius
[mm]
30
36
45
48
60
66
72
76
90
96
108
120
175
210
245
280
400
weight
[kg/m]
0,40
0,50
0,60
0,63
0,65
0,70
0,72
0,80
0,90
0,94
1,05
1,21
1,70
2,13
2,30
2,90
3,90
standard
length
[m]
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
3 or 6
P-G-EX 1
Material:
Black TPE-coated polyester fabric
Reinforcement: Nylon helix, wear strip profile
for abrasion resistance
Characteristics: Lightweight, flexible hose designed to transfer exhaust fumes of petrol and diesel engines at
high temperatures. Crush recoverable and suitable for hose reel systems. Other diameters
available in the range of 35 252 mm.
code
I.D.
[mm]
vacuum
[bar]
SC-PGEX/1-040
SC-PGEX/1-050
SC-PGEX/1-065
SC-PGEX/1-075
SC-PGEX/1-090
SC-PGEX/1-100
SC-PGEX/1-125
SC-PGEX/1-150
SC-PGEX/1-200
40
50
65
75
90
100
125
150
200
0,65
0,50
0,35
0,15
0,12
0,10
0,08
0,06
0,04
136
bending
radius
[mm]
80
85
100
105
175
190
250
300
400
weight
[kg/m]
0,25
0,41
0,53
0,69
0,83
0,87
1,20
1,44
1,83
standard
length
[m]
5 - 7,5 - 10 - 15 - 20
5 - 7,5 - 10 - 15 - 20
5 - 7,5 - 10 - 15 - 20
5 - 7,5 - 10 - 15 - 20
5 - 7,5 - 10 - 15 - 20
5 - 7,5 - 10 - 15 - 20
5 - 7,5 - 10 - 15 - 20
5 - 7,5 - 10 - 15 - 20
5 - 7,5 - 10 - 15 - 20
P 2 SP
Material:
Wall thickness:
Reinforcement:
Working temp.:
Black TPE-coated polyester fabric

0,4 mm
Steel wire helix
From -40C to +150C
Characteristics: Lightweight, very flexible hose designed to transfer fumes of acids and solvents at high
temperatures. Resistant to UV and ozone. Other diameters available in the range of 13 610 mm.
SE version - flame retardant, compliant with DIN 4102 B1.
code
I.D.
[mm]
wire
[mm]
SC-P2SP-020
SC-P2SP-025
SC-P2SP-030
SC-P2SP-040
SC-P2SP-050
SC-P2SP-060
SC-P2SP-070
SC-P2SP-075
SC-P2SP-080
SC-P2SP-090
SC-P2SP-100
SC-P2SP-120
SC-P2SP-125
SC-P2SP-140
SC-P2SP-150
SC-P2SP-175
SC-P2SP-200
SC-P2SP-225
SC-P2SP-250
SC-P2SP-275
SC-P2SP-300
SC-P2SP-325
SC-P2SP-350
SC-P2SP-400
SC-P2SP-450
SC-P2SP-500
20
25
30
40
50
60
70
75
80
90
100
120
125
140
150
175
200
225
250
275
300
325
350
400
450
500
1
1
1
1
1,2
1,2
1,2
1,2
1,2
1,2
1,6
1,6
1,6
1,6
1,6
1,6
2
2
2
2
2
2
2
2
2
2
working
pressure
[bar]
0,45
0,45
0,40
0,35
0,35
0,35
0,30
0,20
0,20
0,20
0,15
0,15
0,13
0,12
0,11
0,09
0,08
0,07
0,07
0,06
0,05
0,05
0,04
0,04
0,03
0,03
vacuum
[bar]
0,25
0,20
0,20
0,15
0,10
0,08
0,08
0,07
0,06
0,06
0,05
0,04
0,04
0,04
0,04
0,03
0,02
0,02
0,02
0,02
0,01
0,01
0,01
0,01
0,01
0,01
bending
radius
[mm]
20
25
30
40
50
60
70
75
80
90
100
120
125
125
150
175
200
225
250
275
300
325
350
400
450
500
weight
[kg/m]
0,08
0,09
0,14
0,16
0,21
0,25
0,29
0,31
0,33
0,38
0,56
0,57
0,70
0,73
0,68
0,82
1,28
1,44
1,60
1,22
1,33
1,44
1,55
1,77
1,99
2,21
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Code example for SE version: SC-P2SPSE-020
137
P 2 HL
Material:
Wall thickness:
Reinforcement:
Working temp.:
Black PVC-coated polyester fabric

0,4 mm
Steel wire helix
From -40C to +80C
Characteristics: Lightweight, very flexible hose designed to transfer solvent fumes and dust in explosionendangered areas. Used for vacuum transport of light granules. Antistatic - R<108 . Other
138
code
I.D.
[mm]
wire
[mm]
SC-P2HL-020
SC-P2HL-025
SC-P2HL-030
SC-P2HL-040
SC-P2HL-050
SC-P2HL-060
SC-P2HL-070
SC-P2HL-075
SC-P2HL-080
SC-P2HL-090
SC-P2HL-100
SC-P2HL-110
SC-P2HL-120
SC-P2HL-125
SC-P2HL-130
SC-P2HL-140
SC-P2HL-150
SC-P2HL-160
SC-P2HL-170
SC-P2HL-175
SC-P2HL-180
SC-P2HL-200
SC-P2HL-250
SC-P2HL-300
SC-P2HL-320
SC-P2HL-350
SC-P2HL-400
SC-P2HL-450
SC-P2HL-500
20
25
30
40
50
60
70
75
80
90
100
110
120
125
130
140
150
160
170
175
180
200
250
300
320
350
400
450
500
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,2
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
2
2
2
2
2
2
2
2
working
pressure
[bar]
2,10
2,00
1,80
1,50
1,20
1,00
0,90
0,85
0,80
0,70
0,60
0,50
0,50
0,50
0,40
0,40
0,30
0,25
0,25
0,25
0,20
0,20
0,15
0,10
0,06
0,06
0,04
0,04
0,03
vacuum
[bar]
0,35
0,35
0,32
0,30
0,25
0,20
0,18
0,12
0,10
0,08
0,08
0,07
0,07
0,07
0,06
0,06
0,06
0,05
0,05
0,05
0,04
0,04
0,03
0,02
0,02
0,02
0,01
0,01
0,01
bending
radius
[mm]
20
25
30
40
50
60
70
75
80
90
100
110
120
125
130
140
150
160
170
175
180
200
250
300
320
350
400
450
500
weight
[kg/m]
0,10
0,12
0,13
0,19
0,24
0,29
0,34
0,36
0,38
0,43
0,51
0,56
0,62
0,64
0,66
0,70
0,77
0,80
0,86
0,89
0,96
1,07
1,33
1,60
1,72
1,87
2,13
2,40
2,67
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
P 2 A 1000
Material:
Wall thickness:
Reinforcement:
Working temp.:
Grey, PVC-coated polyester fabric

0,4 mm
Steel wire helix
From -30C to +80C
Characteristics: Lightweight, very flexible, self-extinguishing hose designed to remove welding fumes and for
air-conditioning installations. Other diameters available in the range of 25 800 mm.
code
I.D.
[mm]
wire
[mm]
SC-P2A1000-030
SC-P2A1000-040
SC-P2A1000-050
SC-P2A1000-060
SC-P2A1000-070
SC-P2A1000-075
SC-P2A1000-080
SC-P2A1000-090
SC-P2A1000-100
SC-P2A1000-120
SC-P2A1000-125
SC-P2A1000-140
SC-P2A1000-150
SC-P2A1000-175
SC-P2A1000-200
SC-P2A1000-250
SC-P2A1000-300
SC-P2A1000-350
SC-P2A1000-400
SC-P2A1000-450
SC-P2A1000-500
30
40
50
60
70
75
80
90
100
120
125
140
150
175
200
250
300
350
400
450
500
1
1
1
1
1
1
1
1
1,2
1,2
1,2
1,2
1,2
2
2
2
2
2
2
2
2
Other colours are also available.

Code examples:
SC-P2A1000-030BK

SC-P2A1000-030Y

SC-P2A1000-030R

SC-P2A1000-030W
working
pressure
[bar]
0,90
0,90
0,80
0,80
0,70
0,60
0,60
0,50
0,50
0,50
0,50
0,35
0,20
0,20
0,20
0,10
0,06
0,05
0,04
0,03
0,02
bending
radius
[mm]
21
28
35
42
49
53
56
63
70
85
88
95
105
123
140
175
210
245
280
315
350
vacuum
[bar]
weight
[kg/m]
0,25
0,20
0,20
0,16
0,14
0,10
0,10
0,09
0,09
0,08
0,08
0,06
0,06
0,05
0,05
0,04
0,03
0,02
0,02
0,01
0,01
0,10
0,11
0,13
0,16
0,20
0,22
0,24
0,27
0,30
0,35
0,38
0,42
0,45
0,63
0,72
0,90
1,08
1,26
1,45
1,63
1,82
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
- black
- yellow
- red
- white
139
OREGON
Material:
Self-extinguishing grey PVC
Reinforcement: PVC helix
Characteristics:
Lightweight, flexible, smooth bore hose designed for extraction of dust, yarns, polluted
air, fumes, etc.
code
I.D.
[mm]
vacuum
[bar]
ME-OREGON-020
ME-OREGON-025
ME-OREGON-030
ME-OREGON-032
ME-OREGON-035
ME-OREGON-038
ME-OREGON-040
ME-OREGON-045
ME-OREGON-050
ME-OREGON-060
ME-OREGON-063
ME-OREGON-070
ME-OREGON-075
ME-OREGON-080
ME-OREGON-090
ME-OREGON-100
ME-OREGON-110
ME-OREGON-120
ME-OREGON-125
ME-OREGON-130
ME-OREGON-140
ME-OREGON-150
ME-OREGON-160
ME-OREGON-180
ME-OREGON-200
ME-OREGON-250
ME-OREGON-300
20
25
30
32
35
38
40
45
50
60
63
70
75
80
90
100
110
120
125
130
140
150
160
180
200
250
300
0,5
0,5
0,5
0,5
0,5
0,5
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
0,4
140
bending
radius
[mm]
20
25
30
32
35
38
40
45
50
60
63
70
75
80
90
100
110
120
125
130
140
150
160
180
200
250
300
weight
[kg/m]
0,15
0,19
0,23
0,24
0,28
0,31
0,33
0,37
0,44
0,56
0,60
0,66
0,75
0,79
0,90
1,01
1,15
1,30
1,36
1,44
1,60
1,76
1,93
2,30
2,65
3,60
4,50
standard
length
[m]
50
50
50
50
50
50
50
50
50
50
50
50
50
30
30
30
30
30
30
30
30
30
20
20
20
15
10
PLS
Material:
Wall thickness:
Reinforcement:
Working temp.:
Special PVC-coated polyester fabric

0,3 mm
Steel wire helix
From -20C to +100C
Characteristics: Lightweight, highly flexible, flame retardant hose designed to air conditioning systems or hot
and cold air transfer to tents and buildings. Available as a standard with soft ends (see picture
above). On request supplied in different colours or with steel rope end rings that allows connection
of the hose for required length with the use of coupling bands.
code
I.D.
[mm]
ND-PLS-0152
ND-PLS-0180
ND-PLS-0203
ND-PLS-0229
ND-PLS-0254
ND-PLS-0305
ND-PLS-0357
ND-PLS-0408
ND-PLS-0425
ND-PLS-0457
ND-PLS-0508
ND-PLS-0525
ND-PLS-0560
ND-PLS-0600
ND-PLS-0700
ND-PLS-0800
ND-PLS-0900
ND-PLS-1000
152
180
203
229
254
305
357
408
425
457
508
525
560
600
700
800
900
1000
working
pressure
[bar]
0,64
0,60
0,55
0,50
0,45
0,35
0,30
0,25
0,24
0,23
0,20
0,19
0,18
0,17
0,15
0,13
0,11
0,10
bending
radius
[mm]
152
180
203
229
254
305
357
408
425
457
508
525
560
600
700
800
900
1000
weight
[kg/m]
1,10
1,16
1,20
1,28
1,35
1,44
1,83
2,05
2,76
2,97
3,30
3,94
4,20
4,50
5,60
6,80
8,40
10,00
standard
length
[m]
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
5 - 7,5 - 10
141
SUPERELASTIC
Two layers of soft PVC
with polyester yarn reinforcement
Working temp.: From 0C to +85C
Material:
Characteristics: Lightweight, highly flexible hose designed for extraction of dust, yarns, polluted air, fumes, etc.
Widely used for domestic and industrial vacuum cleaners or as a protection hose.
code
I.D.
[mm]
PF-SUPERELASTIC-25
PF-SUPERELASTIC-32
PF-SUPERELASTIC-38
PF-SUPERELASTIC-41
PF-SUPERELASTIC-44
PF-SUPERELASTIC-51
PF-SUPERELASTIC-63
25
32
38
41
44
51
63
working
pressure
[bar]
1,7
1,5
1,4
1,4
1,3
1,3
1
bending
radius
[mm]
25
32
38
41
44
51
63
vacuum
[bar]
0,4
0,35
0,3
0,3
0,28
0,28
0,25
weight
[kg/m]
0,19
0,26
0,32
0,35
0,36
0,43
0,51
standard
length
[m]
15
15
15
15
15
15
15
Fittings for SUPERELASTIC hose

Fittings made of soft plastic designed to thread on to
SUPERELASTIC hose.
142
code
fitting I.D.
[mm]
fitting O.D.
[mm]
PF-SUPERELASTIC-32K
PF-SUPERELASTIC-38K
PF-SUPERELASTIC-51K
32
38
50
38
45
58
EVA
Material:
Ethyl-vinyl acetate
Characteristics: Lightweight, very flexible, crushproof and kink-resistant hose designed to extract dust, polluted
air and welding fumes. Widely used in industrial vacuum cleaners.
code
I.D.
[mm]
O.D.
[mm]
vacuum
[bar]
ME-EVA-25
ME-EVA-29
ME-EVA-32
ME-EVA-38
ME-EVA-45
ME-EVA-50
ME-EVA-60
ME-EVA-75
ME-EVA-80
25
29
32
38
45
50
60
75
80
33
36
41
48
55
61
72
88
94
0,5
0,5
0,5
0,5
0,5
0,5
0,4
0,4
0,4
bending
radius
[mm]
66
76
82
93
111
122
146
155
170
weight
[kg/m]
0,20
0,22
0,70
0,36
0,47
0,56
0,70
0,92
1,00
standard
length
[m]
30
30
30
30
30
30
30
15
15
Fittings for EVA hose

Fittings made of soft plastic designed to thread on to
EVA hose.
ME-EVA-32K
ME-EVA-38K
code
fitting I.D.
[mm]
fitting O.D.
[mm]
ME-EVA-32K
ME-EVA-38K
ME-EVA-50K
32
38
50
38
45
58
ME-EVA-50K
143
KEHRFLEX
Internal layer:
Reinforcement:
External layer:
Working temp.:
Corrugated NR rubber
Steel wire helix
Corrugated NR/SBR compound
From -30C to +70C
Characteristics: Very lightweight, flexible suction hose designed for road-sweeping and street cleaning machines
such as: FAUN, FRIES, KUKA, SCHORLING, STREICHER, JOHNSON, etc. Resistant to
abrasion, weather conditions and ageing. Delivered with wire-free cuffs at each end (without
wire helix).
code
I.D.
[mm]
length
[mm]
BG-3612200075
BG-3612200080
BG-3612200100
BG-3612200112
BG-3612200120
BG-3612200125
BG-3612200200
BG-3612200250
BG-3612200300
BG-3612200360
BG-3612200365
BG-3612200400
BG-3612250100
BG-3612250105
BG-3612250115
BG-3612250120
BG-3612250125
BG-3612250140
BG-3612250150
BG-3612250160
BG-3612250165
BG-3612250175
203
203
203
203
203
203
203
203
203
203
203
203
254
254
254
254
254
254
254
254
254
254
750
800
1000
1120
1200
1250
2000
2500
3000
3600
3650
4000
1000
1050
1150
1200
1250
1400
1500
1600
1650
1750
working
pressure
[bar]
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
bursting
pressure
[bar]
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
vacuum
[bar]
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
0,3
VACULIFT
Material:
Reinforcement:
External layer:
Working temp.:
Neoprene-coated polyester fabric

Steel wire helix
Orange protective tape
From -25C to +125C
Characteristics: Lightweight, very flexible hose designed for safe and easy vacuum lifting of several types of
loads such as: barrels, bags, packages. Suitable for laying kerbs, slabs, stone plates. Maximum
length when unfolded: 4 m. Diameters available in the range of 60 mm to 305 mm. Selecting
a hose requires defining the maximum weight of lifted loads - contact Sales Department of
TUBES INTERNATIONAL.
144

Connectors for ducting hoses
System of connectors designed to assemble ducting hoses easily and effectively using TORRO SPIRO worm drive
bridge clamps (see chapter: HOSE CONNECTORS). A variety of shapes of the connectors allows for construction of
a new installation or modernization of the old one. The connectors are made of zinc-plated steel sheet, 0,5 mm thick
as a standard (aluminium and stainless steel version as an option). Custom made connectors are also available.
Straight connector
90 elbow (R = 1,5xd)
KN
KSBB 90
code
DN
O.D.
[mm]
code
DN
O.D.
[mm]
KS-KN-080-OC
KS-KN-100-OC
KS-KN-125-OC
KS-KN-140-OC
KS-KN-150-OC
KS-KN-160-OC
KS-KN-180-OC
KS-KN-200-OC
KS-KN-225-OC
KS-KN-250-OC
KS-KN-280-OC
KS-KN-300-OC
KS-KN-400-OC
KS-KN-500-OC
80
100
125
140
150
160
180
200
225
250
280
300
400
500
77
97
122
137
147
157
177
197
222
247
277
297
397
497
KS-KSBB90-080-OC
KS-KSBB90-100-OC
KS-KSBB90-125-OC
KS-KSBB90-140-OC
KS-KSBB90-150-OC
KS-KSBB90-160-OC
KS-KSBB90-180-OC
KS-KSBB90-200-OC
KS-KSBB90-225-OC
KS-KSBB90-250-OC
KS-KSBB90-280-OC
KS-KSBB90-300-OC
KS-KSBB90-400-OC
KS-KSBB90-500-OC
80
100
125
140
150
160
180
200
225
250
280
300
400
500
77
97
122
137
147
157
177
197
222
247
277
297
397
497
Reduction symmetric connector
Reduction asymmetric connector
KRS
KRA
code
DN
O.D.
[mm]
code
DN
O.D.
[mm]
KS-KRS-100/080-OC
KS-KRS-125/100-OC
KS-KRS-150/100-OC
KS-KRS-150/125-OC
KS-KRS-180/150-OC
KS-KRS-200/150-OC
KS-KRS-200/180-OC
KS-KRS-225/200-OC
KS-KRS-250/200-OC
KS-KRS-250/225-OC
KS-KRS-280/250-OC
KS-KRS-300/250-OC
KS-KRS-300/280-OC
KS-KRS-400/300-OC
KS-KRS-500/400-OC
100/80
125/100
150/100
150/125
180/150
200/150
200/180
225/180
250/200
250/225
280/250
300/250
300/280
400/300
500/400
97/77
122/97
147/97
147/122
177/147
197/147
197/177
222/177
247/197
247/222
277/247
297/247
297/277
397/297
497/397
KS-KRA-100/080-OC
KS-KRA-125/100-OC
KS-KRA-150/100-OC
KS-KRA-150/125-OC
KS-KRA-180/150-OC
KS-KRA-200/150-OC
KS-KRA-200/180-OC
KS-KRA-225/200-OC
KS-KRA-250/200-OC
KS-KRA-250/225-OC
KS-KRA-280/250-OC
KS-KRA-300/250-OC
KS-KRA-300/280-OC
KS-KRA-400/300-OC
KS-KRA-500/400-OC
100/80
125/100
150/100
150/125
180/150
200/150
200/180
225/180
250/200
250/225
280/250
300/250
300/280
400/300
500/400
97/77
122/97
147/97
147/122
177/147
197/147
197/177
222/177
247/197
247/222
277/247
297/247
297/277
397/297
497/397
145

Connectors for ducting hoses
45 elbow (R = 1,5xd)
Symmetric tee (Y shape)
KSBB 45
code
DN
O.D.
[mm]
KS-KSBB45-080-OC
KS-KSBB45-100-OC
KS-KSBB45-125-OC
KS-KSBB45-140-OC
KS-KSBB45-150-OC
KS-KSBB45-160-OC
KS-KSBB45-180-OC
KS-KSBB45-200-OC
KS-KSBB45-225-OC
KS-KSBB45-250-OC
KS-KSBB45-280-OC
KS-KSBB45-300-OC
KS-KSBB45-400-OC
KS-KSBB45-500-OC
80
100
125
140
150
160
180
200
225
250
280
300
400
500
77
97
122
137
147
157
177
197
222
247
277
297
397
497
90 symmetric tee
KTSBY
code
DN
O.D.
[mm]
KS-KTSBY-100-OC
KS-KTSBY-125-OC
KS-KTSBY-140-OC
KS-KTSBY-150-OC
KS-KTSBY-160-OC
KS-KTSBY-180-OC
KS-KTSBY-200-OC
KS-KTSBY-225-OC
KS-KTSBY-250-OC
KS-KTSBY-280-OC
KS-KTSBY-300-OC
KS-KTSBY-400-OC
KS-KTSBY-500-OC
100
125
140
150
160
180
200
225
250
280
300
400
500
97
122
137
147
157
177
197
222
247
277
297
397
497
45 symmetric tee
KTSB 90
KTSB 45
code
DN
O.D.
[mm]
code
DN
O.D.
[mm]
KS-KTSB90-080-OC
KS-KTSB90-100-OC
KS-KTSB90-125-OC
KS-KTSB90-140-OC
KS-KTSB90-150-OC
KS-KTSB90-160-OC
KS-KTSB90-180-OC
KS-KTSB90-200-OC
KS-KTSB90-225-OC
KS-KTSB90-250-OC
KS-KTSB90-280-OC
KS-KTSB90-300-OC
KS-KTSB90-400-OC
KS-KTSB90-500-OC
80
100
125
140
150
160
180
200
225
250
280
300
400
500
77
97
122
137
147
157
177
197
222
247
277
297
397
497
KS-KTSB45-080-OC
KS-KTSB45-100-OC
KS-KTSB45-125-OC
KS-KTSB45-140-OC
KS-KTSB45-150-OC
KS-KTSB45-160-OC
KS-KTSB45-180-OC
KS-KTSB45-200-OC
KS-KTSB45-225-OC
KS-KTSB45-250-OC
KS-KTSB45-280-OC
KS-KTSB45-300-OC
KS-KTSB45-400-OC
KS-KTSB45-500-OC
80
100
125
140
150
160
180
200
225
250
280
300
400
500
77
97
122
137
147
157
177
197
222
247
277
297
397
497
146
INDUSTRIAL HOSES - composite

Characteristics
Composite hoses make a new generation of light and very flexible, multi-layer hoses. Depending on the construction
a hose can be used to transfer chemical products (aggressive as well), petrochemical products, liquefied gases,
concentrated alcohol, etc. These hoses are designed to serve road and rail tankers, marine applications, industrial
applications.
Construction
Composite hoses are built from several layers of different components what distinguishes their construction from
the one of regular hoses. The internal wire helix provides resistance to vacuum. It is covered with layers of film and
fabric which can be polypropylene, polyamide, PTFE, ECTFE, polyester, aramid or glass fiber. Such construction
provides hoses with a tremendous range of chemical, thermal and pressure resistance. The external wire helix
binds the layers tightly together and protects the hose against abrasion and mechanical damage. The material
of external wire (G - galvanized steel, P - PVC coated steel, S - stainless steel 316, N - nylon-coated steel, A aluminum ) depends on the application. It is always given in the name of a hose (product code) e.g. DANOIL 3 AG
has an internal wire helix made of aluminum and an external made of galvanized steel.
cover
layers
of fabric
external
wire helix
layers
of film
layers
of fabric
fitting
ferrule seal
internal
wire helix
ferrule
composite
hose
Electrical conductivity
Electrical conductivity is obtained by the contact of internal and external wire helix with a fitting (direct, by a ferrule,
electrostatic wire, conductive rubber seal). According to EN 13765:2010 the electrical resistance should not exceed
1 /m (2,5 /m for DN <50) from one end to the other. For hoses transferring liquefied gas it should not exceed
10 according to EN 13766:2003.
Installation
Hoses are supplied as complete hose assemblies with numerous kinds of fittings.
Initial hose selection:
Working pressure given in a hose description is its maximum working pressure. Safety factor 4:1 at +23C (HEAVY
DUTY, DANCHEM CRIOGENIC, SUPERFLEX hoses: 5:1). The higher the working temperature, the lower the
working pressure. Application at temperature above +60C requires approval. It is not recommended to use a
hose at its maximum working pressure, temperature or bending radius. Proper and final selection of a hose in
particular working conditions and for specific medium should always be confirmed in writing by Sales or Technical
Department of TUBES INTERNATIONAL.
Usage
All hose assemblies are tested for pressure and electrical continuity. Hose assemblies should be used according
to their handling, cleaning and storage rules as well as instruction or proper regulations. They should be regularly
tested over a period of service and visually examined before each operation.
Repairs
Frequently it may be possible to repair a hose assembly which has been damaged by reassembling the fittings.
Contact Technical Department of TUBES INTERNATIONAL to make arrangements to repair your hose assembly.
147
DANOIL TRANSPORT
Internal layer: Polypropylene (film, fabric)
Reinforcement: Internal / external wire helix,
fabric layers (polypropylene)
Cover:
PVC-coated fabric resistant to abrasion
and weather conditions
Characteristics: Suction-delivery hose designed for transfer, loading and unloading of petrol, diesel oil, and other
petrochemical products (with aromatic content up to 50%) under standard working conditions.
Internal and external wire helix is made of galvanized steel. Safety factor 4:1.
Usage:
Reloading applications, loading - unloading stations, loading and unloading of road and rail
tankers, road tanker equipment, industrial installations.
Standards:
EN 13765:2010 (type 2), BS 3492:1987BX.
Assembly:
Supplied as a complete hose assembly with fittings.
code
I.D.
[mm]
DT-DANOILTR-050
DT-DANOILTR-075
DT-DANOILTR-100
50
75
100
working
pressure
[bar]
10,5
10,5
10,5
bending
radius
[mm]
150
205
265
weight
[kg/m]
1,6
2,5
3,6
maximum
length
[m]
20
20
20
DANOIL 3GG, 3AG

Reinforcement: Internal / external wire helix, fabric
layers (polypropylene)
Cover:
Characteristics: Suction-delivery hose designed for transfer, loading and unloading of petrol, diesel oil and other
petrochemical products (with aromatic content up to 50%) under standard working conditions.
Safety factor 4:1. AG version (aluminum internal wire helix) is much lighter (about 30%) so
significantly facilitates handling.
Usage:
Standards:
EN 13765:2010 (type 2), BS 3492:1987 BX.
Assembly:
code
DT-DANOIL3GG-025
DT-DANOIL3GG-038
DT-DANOIL3GG-050
DT-DANOIL3GG-065
DT-DANOIL3GG-075
DT-DANOIL3GG-100
DT-DANOIL3AG-050
DT-DANOIL3AG-065
DT-DANOIL3AG-075
DT-DANOIL3AG-100
148
working
bending
pressure
radius
[bar]
[mm]
25
10,5
100
38
10,5
125
50
10,5
150
65
10,5
180
75
10,5
205
100
10,5
265
AG version (aluminium internal wire helix)
50
10,5
150
65
10,5
180
75
10,5
205
100
10,5
265
I.D.
[mm]
0,80
1,10
1,60
2,10
2,50
3,60
maximum
length
[m]
20
20
20
20
20
20
1,40
1,60
1,70
2,40
20
20
20
20
weight
[kg/m]
DANOIL 7 GG, AG
Reinforcement: Internal/external wire helix
Cover:
PVC-coated polyester fabric resistant
to abrasion and weather conditions
Characteristics: Suction-delivery hose designed for transfer, loading and unloading of petrol, diesel oil and other
petrochemical products (with aromatic content up to 50%) under heavy duty working conditions.
Safety factor 4:1 (HD - Heavy Duty version - 5:1). AG version (aluminum internal wire helix) is
much lighter (about 30%) so significantly facilitates handling.
Usage:
Standards:
EN 13765:2010 (type 3), BS 5842:1980 (HD version additionally complies with USCG, IMO
Code for marine application).
Assembly:
code
I.D.
[mm]
DT-DANOIL7GG-025
DT-DANOIL7GG-038
DT-DANOIL7GG-050
DT-DANOIL7GG-065
DT-DANOIL7GG-075
DT-DANOIL7GG-100
25
38
50
65
75
100
DT-DANOIL7GGHD-100
DT-DANOIL7GGHD-150
DT-DANOIL7GGHD-200
DT-DANOIL7GGHD-250
100
150
200
250
DT-DANOIL7AG-065
DT-DANOIL7AG-075
DT-DANOIL7AG-100
65
75
100
working
bending
pressure
radius
[bar]
[mm]
14
100
14
140
14
180
14
205
14
280
14
395
HEAVY DUTY version
14
405
14
510
14
760
10,5
915
AG (aluminium internal wire helix)
14
180
14
205
14
265
0,80
1,20
1,90
2,50
3,00
5,20
maximum
length
[m]
20
20
20
20
20
20
6,40
10,70
15,00
20,50
20
20
20
12
1,60
1,70
2,40
20
20
20
weight
[kg/m]
149
DANOIL 9 GG, AG, NG, SG

Reinforcement: Internal/external wire helix,
Cover:
Characteristics: Suction-delivery hose designed for transfer, loading and unloading of petrol, diesel oil, and
other petrochemical products under heavy duty working conditions. Particularly recommended
for fuel with aromatic content over 50%, unleaded petrol (DANOIL 9 GG) and biodiesel, MTBE
- methyl tertiary-butyl ether - fuel additive, jet fuel (DANOIL 9 AG, NG, SG). Safety factor 4:1
(HD - Heavy Duty version - 5:1). AG version (aluminum internal wire helix) is much lighter (about
30%) so significantly facilitates handling.
Usage:
Standards:
Assembly:
code
DT-DANOIL9GG-025
DT-DANOIL9GG-038
DT-DANOIL9GG-050
DT-DANOIL9GG-065
DT-DANOIL9GG-075
DT-DANOIL9GG-100
DT-DANOIL9GGHD-100
DT-DANOIL9GGHD-150
DT-DANOIL9GGHD-200
DT-DANOIL9GGHD-250
DT-DANOIL9AG-065
DT-DANOIL9AG-075
DT-DANOIL9AG-100
working
bending
pressure
radius
[bar]
[mm]
25
14
100
38
14
140
50
14
180
65
14
205
75
14
280
100
14
395
HEAVY DUTY version
100
14
405
150
14
510
200
14
760
250
10,5
915
AG version (aluminium internal wire helix)
65
14
180
75
14
205
100
14
265
I.D.
[mm]
0,80
1,20
1,90
2,50
3,00
5,20
maximum
length
[m]
20
20
20
20
20
20
6,40
10,70
15,00
20,50
20
20
20
12
1,60
1,70
2,40
20
20
20
weight
[kg/m]
Code example of DANOIL 9 NG (nylon-coated internal steel wire helix): DT-DANOIL9NG-075
Selecting composite hose assemblies for biofuels

Due to increasing biofuel consumption it is very important to match a proper hose with application. It is biodiesel
in particular which contains esterified vegetable oils that damage elastomers and plastic used in the production
of hoses and seals (nitrile, polypropylene, PVC and other). On the other hand some metals used in the production
of fittings and connectors may have negative impact on the properties of fuel. Brass, bronze, copper, lead, tin and
zinc can accelerate the process of fuel oxidation and combined with fuel components, create insoluble sediments or
gels. For these reasons, fittings made of copper alloys, soldered or zinc plated should not be used. However fittings
and other equipment made of aluminum, stainless steel or carbon (but not zinc-plated) are highly recommended.
For biofuel, it is advised to use DANOIL9 NG, with an internal layer made of polyamide and polyamide (nylon)
coated internal wire helix, which is extremely resistant to both biodiesel and bioethanol. Versions DANOIL9 SG
and AG can also be used.
150
DANOIL 7 HOT OIL 100

Internal layer: Polypropylene, polyester (film, fabric)
fabric layers (polypropylene, polyester)
Cover:
Characteristics: Suction-delivery hose designed for transfer, loading and unloading of hot oil. The internal and
external wire helixes are made of galvanized steel (GG). Safety factor 4:1
Usage:
Standards:
EN 13765:2010 (type 3), BS 5842:1980, BS 3492:1987 BX.
Assembly:
code
I.D.
[mm]
DT-DANOIL7HO-025
DT-DANOIL7HO-038
DT-DANOIL7HO-050
DT-DANOIL7HO-065
DT-DANOIL7HO-075
DT-DANOIL7HO-100
25
38
50
65
75
100
working
pressure
[bar]
14
14
14
14
14
14
bending
radius
[mm]
100
140
180
205
280
395
weight
[kg/m]
0,80
1,20
1,90
2,50
3,00
5,20
maximum
length
[m]
20
20
20
20
20
20
DANOIL VR (VAPOUR RECOVERY)

Cover:
Characteristics: Special purpose DANOIL hose designed to recover vapours during reloading of petrochemical
products. It is much lighter and extremely flexible when compared to a standard version. Safety
factor 4:1.
Usage:
Vapour recovery hose assemblies in reloading applications, loading - unloading stations, road
tanker fixed equipment, industrial instillations.
Standards:
EN 13765:2010 (type 1).
Assembly:
code
I.D.
[mm]
DT-DANOILVRGG-075
DT-DANOILVRGG-100
DT-DANOILVRGG-150
DT-DANOILVRGG-200
DT-DANOILVRGG-250
75
100
150
200
250
working
pressure
[bar]
7
7
7
7
7
bending
radius
[mm]
100
140
180
205
280
weight
[kg/m]
2,40
3,40
8,30
12,50
16,00
maximum
length
[m]
20
20
20
20
12
151

Composite hose assemblies for fuel road tankers
Hose type:
Working press.:
Vacuum:
Working temp.:
DANOIL TRANSPORT DN 75
To 10 bar
To 0,9 bar
Ambient
Characteristics: Suction-delivery complete hose assemblies DN 75 (3) designed for reloading of petrochemical
products (with aromatic content up to 50%). The hose assembly is manufactured using DANOIL
TRANSPORT hose. Fittings and ferrules made of aluminium. Available in two versions - for product
transfer (CAMLOCK couplings at both ends) or vapour recovery (at one end CAMLOCK vapour
coupling with a probe ). These hose assemblies are delivered with a TDT conformity declaration.
Budowa przewodu
dust plug
AC-DP-300AX
3 male BSP thread

DT-KGZ-075A
3 CAMLOCK D type
AC-DU-300A (product)
ZP-VR-DVR300-A (vapour)
composite hose
DT-DANOILTR-075
ferrule DT-T-075A
ferrule seal
DT-UT-075N
3 male BSP thread

DT-KGZ-075A
ferrule DT-T-075A
ferrule seal
DT-UT-075N
dust plug
AC-DP-300AX
3 CAMLOCK D type
AC-DU-300A
(product and vapour)
Product transfer (black)

code
DT-CP-6000
DT-CP-5800
DT-CP-5500
DT-CP-5000
DT-CP-4400
DT-CP-4000
coupling types
length
[mm]
75
3 CAMLOCK D type +
3 dust plug DP (both sides)
6000
5800
5500
5000
4400
4000
DN
coupling types
length
[mm]
DN
Vapour recovery (red)

code
DT-CO-6000
DT-CO-5800
DT-CO-5500
DT-CO-5000
DT-CO-4400
DT-CO-4000
152
75
3 CAMLOCK DVR type

+ 3 dust plug DP
3 CAMLOCK D type
+ 3 dust plug DP
6000
5800
5500
5000
4400
4000
DANCHEM PG, PS, SG, SS

Cover:
Characteristics: Suction-delivery hose designed for transfer, loading and unloading of chemicals (acids, bases,
solvents, petrochemical products etc.). Available as PG, PS, SG, SS versions which vary in
the material of an internal or external wire helix (P- polypropylene-coated steel, G - galvanized
steel, S - stainless steel 316). Example: SG stands for an internal wire helix made of stainless
steel 316 and an external of galvanized steel. Safety factor 4:1 (HD - Heavy Duty version - 5:1).
A special version - DANCHEM SS NC (Nylon Cover) coated with polyamide fabric is suitable
for those applications where the hose must be immersed in a container with petrochemical
products - hoses draining water from floating roofs.
Usage:
tankers, road tanker fixed equipment, industrial installations.
Standards:
Assembly:
code
I.D.
[mm]
DT-DANCHEM...-025
DT-DANCHEM...-038
DT-DANCHEM...-050
DT-DANCHEM...-065
DT-DANCHEM...-075
DT-DANCHEM...-100
25
38
50
65
75
100
DT-DANCHEM...HD-100
DT-DANCHEM...HD-150
DT-DANCHEM...HD-200
DT-DANCHEM...HD-250
100
150
200
250
working
bending
pressure
radius
[bar]
[mm]
14
100
14
140
14
180
14
205
14
280
14
395
HEAVY DUTY version
14
405
14
510
14
760
10,5
915
0,80
1,20
1,90
2,50
3,00
5,20
maximum
length
[m]
20
20
20
20
20
20
6,40
10,70
15,00
20,50
20
20
20
12
weight
[kg/m]
Code example of DANCHEM PG 25 mm: DT-DANCHEMPG-025
153
DANFLON SG, SS, GG

Internal layer: ECTFE film, polypropylene
fabric layers (polyester)
Cover:
Working temp.: From - 30C to + 80C (SG, SS, GG)
for versions SGA, SSA. GGA up to
+150C depending on medium and
working pressure
Characteristics: Suction-delivery hose designed for transfer, loading and unloading of highly aggressive
chemicals, solvents, molten sulphur, bitumen. The internal layer is made of ECTFE (ethylene
chlorotrifluoroethylene - highly resistant to chemicals). Available in SG, SS and GG versions,
which vary in the material of an internal or external helixes (G - galvanized steel, S - 316 acid
resistant steel). Example: SG stands for an internal wire helix made of 316 stainless steel and
an external of galvanized steel. Versions resistant to high temperature - SGA, SSA, GGA.
Safety factor 4:1 (HD - Heavy Duty version - 5:1)
Usage:
tankers, road tanker fixed equipment, industrial installations.
Standards:
Assembly:
code
I.D.
[mm]
DT-DANFLON...-025
DT-DANFLON...-038
DT-DANFLON...-050
DT-DANFLON...-065
DT-DANFLON...-075
DT-DANFLON...-100
25
38
50
65
75
100
DT-DANFLON...HD-100
DT-DANFLON...HD-150
DT-DANFLON...HD-200
DT-DANFLON...HD-250
100
150
200
250
working
bending
pressure
radius
[bar]
[mm]
14
100
14
140
14
180
14
205
14
280
14
395
HEAVY DUTY version
14
405
14
510
14
760
10,5
915
0,8
1,2
1,9
2,5
3,0
5,2
maximum
length
[m]
20
20
20
20
20
20
6,4
10,7
15,0
20,5
20
20
20
12
weight
[kg/m]
Code example of DANFLON SG 25 mm: DT-DANFLONSG-025
TUBES INTERNATIONAL possess recognition of

Transportation Technical Supervision (decision number: W/M/N-77/10)
to manufacture, modernisation, repair:

loading and unloading stations

flexible hose assemblies - tank truck equipment
154
SUPERFLEX
ECTFE (film),
polypropylene (film, fabric)
Reinforcement: Internal/external wire helix made
of AISI 316 steel, layers of fabric
(polyester) with special reinforcement
Cover:
Internal layer:
Characteristics: Suction-delivery hose designed for transfer, loading and unloading of highly aggressive chemicals
solvents, molten sulphur, bitumen under heavy duty working conditions. The internal layer is
made of ECTFE (ethylene chlorotrifluoroethylene - highly resistant to chemicals). The closer
wire pitch of internal and external wires increases the impact resistance of the hose and reduces
the risk of over-bending. Multiple high tensile strength layers considerably reduce elongation
and plastic deformation at high temperature, and increase mechanical strength of the hose.
Safety factor 5:1.
Usage:
Ship to shore and industrial reloading applications. Recommended for heavy duty tasks:
concentrated sulphuric acid, products conveyed hot (palm oil), long unsupported lengths such
as required by hose towers, hoses which must be cleaned with low pressure steam.
Assembly:
code
I.D.
[mm]
DT-SUPERFLEX-100
DT-SUPERFLEX-150
DT-SUPERFLEX-200
DT-SUPERFLEX-250
100
150
200
250
working
pressure
[bar]
16
16
16
16
bending
radius
[mm]
430
540
800
970
weight
[kg/m]
6,80
11,30
16,50
21,70
maximum
length
[m]
20
20
20
12
DANCHEM VR (VAPOUR RECOVERY)

Cover:
Characteristics: Special purpose DANCHEM hose design to recover vapours during reloading of chemical
products. It is much lighter and extremely flexible when compared to a standard version. Safety
factor 4:1.
Vapour recovery hose assemblies in reloading applications, loading - unloading stations, road
Usage:
tanker equipment, industrial installations.
EN 13765:2010 (type 1).
Standards:
Assembly:
code
I.D.
[mm]
DT-DANCHEMVRSS-075
DT-DANCHEMVRSS-100
DT-DANCHEMVRSS-150
DT-DANCHEMVRSS-200
DT-DANCHEMVRSS-250
75
100
150
200
250
working
pressure
[bar]
7
7
7
7
7
bending
radius
[mm]
100
140
180
205
280
weight
[kg/m]
2,40
3,40
8,30
12,50
16,00
maximum
length
[m]
20
20
20
20
12
155
DANCHEM PA SS CRYOGENIC
Internal layer: Film and thermoplastic fabric
Reinforcement: Internal/external wire helix, fabric layers
Cover:
White, polyamide fabric resistant to
abrasion and weather conditions
(DANCHEM PA, DANCHEM PA CO2)
From -200C to +80C
(DANCHEM PA200)
Characteristics: Suction-delivery hose designed for transfer, loading and unloading of cryogenic substances
(low temperature transfer) e.g. LPG, ammonia, carbon dioxide, ethylene (DANCHEM PA).
A special version - DANCHEM PA CO is particularly recommended for carbon dioxide. DANCHEM
PA200 version designed for liquid natural gas (LNG). Internal and external wire helix is made
of AISI 316 stainless steel, internal layers of fabric and film made of thermoplastic material,
resistant to low temperature. Safety factor 5:1.
Usage:
Industrial applications, unloading and loading of liquid gases. EN 13766, complies with USCG,
Standards:
IMO Gas Carrier Code.
Assembly:
code
I.D.
[mm]
DT-DANCHEMPA-025
DT-DANCHEMPA-038
DT-DANCHEMPA-050
DT-DANCHEMPA-065
DT-DANCHEMPA-075
DT-DANCHEMPA-100
DT-DANCHEMPA-150
DT-DANCHEMPA-200
DT-DANCHEMPA-250
25
38
50
65
75
100
150
200
250
DT-DANCHEMPACO2-025
DT-DANCHEMPACO2-038
DT-DANCHEMPACO2-050
25
38
50
DT-DANCHEMPA200-025
DT-DANCHEMPA200-038
DT-DANCHEMPA200-050
DT-DANCHEMPA200-065
DT-DANCHEMPA200-075
DT-DANCHEMPA200-100
DT-DANCHEMPA200-150
DT-DANCHEMPA200-200
DT-DANCHEMPA200-250
25
38
50
65
75
100
150
200
250
156
working
bending
pressure
radius
[bar]
[mm]
25
100
25
140
25
180
25
205
25
280
25
395
21
510
21
760
15
915
DANCHEM PA CO2
25
100
25
140
25
180
DANCHEM PA200
25
100
25
140
25
180
25
205
25
280
25
395
21
510
21
760
15
915
1,00
1,50
2,50
3,30
4,50
7,50
13,50
18,50
25,00
maximum
length
[m]
20
20
20
20
20
20
20
20
12
1,00
1,50
2,50
20
20
20
1,00
1,50
2,50
3,30
4,50
7,50
13,50
18,50
25,00
20
20
20
20
20
20
20
20
12
weight
[kg/m]

Fire resistant version - FIRESAFE
All composite hoses are available in a FIRESAFE version. The implementation of additional layers which repel heat
and retard fire allow to keep media flow continuous and the system tight long enough to prevent further damage.
When tested, a FIRESAFE hose filled with jet fuel is intact and tight after 30 minutes in extreme fire conditions at
+800C and it still retards fire even at +1200C. Additionally, after this period the wall of the hose does not burst
abruptly but instead gradually releases the product through the wall and burns it off. It allows to conduct fire fighting
and rescue operations.
HOSE BUN (support slings)

Special hose bun made of abrasion resistant
polyurethane with slings. Used for lifting and
suspension of all types of hoses during reloading.
HOSE BUN protects against collapse and premature
failure of a hose. Its construction enables installation
onto already connected hoses. A vivid red colour
of the bun makes clearly visible while handling.
Recommended for composite hoses in particular.
Supplied with slings made of nylon as a standard.
hose DN
[mm]
25
38
50
75
100
150
200
code
DT-HB-025
DT-HB-038
DT-HB-050
DT-HB-075
DT-HB-100
DT-HB-150
DT-HB-200
Protection rings
Rubber protection rings protect against abrasion
wherever dragging of the hose across the floor
cannot be avoided. They are made of oil-resistant
extruded rubber strip which is cut for required length
and mounted on a hose with worm drive clamps.
Strip width: about 40 mm
Strip thickness: about 17 mm
hose DN
25
38
50
65
75
100
100HD
150HD
200HD
code
DT-SS42
rubber strip
length - about [mm]
155
200
235
286
325
410
420
565
770
clamp code
zinc-plated
AB-03009004
AB-03009006
AB-03009007
AB-03009009
AB-03009010
AB-03009013
AB-03009013
AB-03009017
AB-03009024
stainless
AB-03017738
AB-03017535
AB-03017543
AB-03017560
AB-03017578
AB-03017607
AB-03017607
AB-03017640
AB-03017690
157
Standard fittings for composite hoses
hose
DN
[mm]
25
38
50
65
75
100
150
200
158
ferrule
ferrule seal
ferrule
code
ferrule seal
code
DT-T-025
DT-T-025SS
DT-T-038
DT-T-038SS
DT-T-050
DT-T-050SS
DT-T-065
DT-T-065SS
DT-T-075
DT-T-075A
DT-T-075SS
DT-T-100
DT-T-100A
DT-T-100SS
DT-T-150
DT-T-150SS
DT-T-200
DT-T-200SS
DT-UT-025N
DT-UT-025V
DT-UT-038N
DT-UT-038V
DT-UT-050N
DT-UT-050V
DT-UT-065N
DT-UT-065V
BSP female thread, flat sealing
thread
[inch]
1
1.1/2
2
2.1/2
nut
code
spigot
code
seal
code
DT-KGW-025B-N
DT-KGW-025SS-N
DT-KGW-038B-N
DT-KGW-038SS-N
DT-KGW-050B-N
DT-KGW-050SS-N
DT-KGW-065B-N
DT-KGW-065SS-N
DT-KGW-025B-W
DT-KGW-025SS-W
DT-KGW-038B-W
DT-KGW-038SS-W
DT-KGW-050B-W
DT-KGW-050SS-W
DT-KGW-065B-W
DT-KGW-065SS-W
DT-KGWU-025S
DT-KGWU-025T
DT-KGWU-038S
DT-KGWU-038T
DT-KGWU-050S
DT-KGWU-050T
DT-KGWU-065S
DT-KGWU-065T
DT-UT-075N
DT-UT-075V
DT-KGW-075B-N
DT-KGW-075SS-N
DT-KGW-075B-W
DT-KGW-075SS-W
DT-KGWU-075S
DT-KGWU-075T
DT-UT-100N
DT-UT-100V
DT-KGW-100A-N
DT-KGW-100B-N
DT-KGW-100SS-N
DT-KGW-100A-W
DT-KGW-100B-W
DT-KGW-100SS-W
DT-KGWU-100S
DT-KGWU-100T
DT-UT-150N
DT-UT-150V
DT-UT-200N
DT-UT-200V

Standard fittings for composite hoses
BSP male thread
flanges
CAMLOCK C CAMLOCK E
fixed flange
PN16
hose
thread
DN
[inch]
[mm]
25
38
50
65
75
100
code
DT-KGZ-025B
DT-KGZ-025P
DT-KGZ-025SS
DT-KGZ-038B
1.1/2 DT-KGZ-038P
DT-KGZ-038SS
DT-KGZ-050A
DT-KGZ-050B
2
DT-KGZ-050P
DT-KGZ-050SS
DT-KGZ-065A
DT-KGZ-065B
2.1/2
DT-KGZ-065P
DT-KGZ-065SS
DT-KGZ-075A
DT-KGZ-075B
3
DT-KGZ-075P
DT-KGZ-075SS
DT-KGZ-100A
DT-KGZ-100B
4
DT-KGZ-100P
DT-KGZ-100SS
1
code
DN
[mm]
code
spigot
code
DT-KKO-025
DT-KKO-025P
DT-KKO-025SS
DT-KKO-038
DT-KKO-038P
DT-KKO-038SS
DT-KKO-025-W
DT-KKO-025P-W
DT-KKO-025SS-W
DT-KKO-038-W
DT-KKO-038P-W
DT-KKO-038SS-W
50
DT-KKS-050
DT-KKS-050P
DT-KKS-050SS
DT-KKO-050
DT-KKO-050P
DT-KKO-050SS
DT-KKO-050-W
DT-KKO-050P-W
DT-KKO-050SS-W
65
DT-KKS-065
DT-KKS-065P
DT-KKS-065SS
DT-KKO-065
DT-KKO-065P
DT-KKO-065SS
DT-KKO-065-W
DT-KKO-065P-W
DT-KKO-065SS-W
DT-KCE-025SS
25
DT-KCC-038SS
DT-KCE-038SS
40
DT-KCC-050A
DT-KCC-050B
DT-KCC-050SS
DT-KCE-050A
DT-KCE-050B
DT-KCE-050SS
flange
code
DT-KKS-025
DT-KKS-025P
DT-KKS-025SS
DT-KKS-038
DT-KKS-038P
DT-KKS-038SS
DT-KCC-025SS
DT-KCC-065B
code
swivel flange
PN16
DT-KCC-075A
DT-KCC-075B
DT-KCC-075SS
DT-KCE-075A
DT-KCE-075B
DT-KCE-075SS
80
DT-KKS-075
DT-KKS-075P
DT-KKS-075SS
DT-KKO-075
DT-KKO-075P
DT-KKO-075SS
DT-KKO-075-W
DT-KKO-075P-W
DT-KKO-075SS-W
DT-KCC-100A
DT-KCC-100SS
DT-KCE-100A
100
DT-KKS-100
DT-KKS-100P
DT-KKS-100SS
DT-KKO-100
DT-KKO-100P
DT-KKO-100SS
DT-KKO-100-W
DT-KKO-100P-W
DT-KKO-100SS-W
DT-KKS-150
DT-KKS-150SS
DT-KKS-200
DT-KKS-250SS
DT-KKO-150
DT-KKO-150SS
DT-KKO-200
DT-KKO-250SS
DT-KKO-150-W
DT-KKO-150SS-W
DT-KKO-200-W
DT-KKO-250SS-W
150
150
200
200
material: A -
aluminium
B -
brass
P -
polyethylene (UHMWPE)
SS - stainless steel
without suffix - carbon steel
N -
V -
T -
S -
NBR
viton
PTFE
leather
Other types or versions of fittings are also available (e.g. ASA and TTMA flanges, API fittings, ECTFE-lined fittings).
Several types of couplings can be used on hoses with BSP male threads ( TW couplings, dry disconnect couplings etc.)
159
INDUSTRIAL HOSES - metal

Folded hoses
Characteristics:
Hoses folded from a metal band (Peschel hoses): made by spiral winding of an extruded metal band, usually
zinc-plated carbon steel or stainless steel. Extrusion of the band allows its edges to overlap and ensures hose
flexibility. Additionally, different kinds of seals can be used. Such hoses are mainly used for low pressure applications,
vacuum or as protective covers.
clamp
GRIPLOCK folded hose
INTERLOCK folded hose
cross-cut
Depending on its diameter GRIPLOCK hose can retain a required angle once bent or does not retain it. INTERLOCK
hose does not retain any shape or angle and has a seal made of rubber, cotton or copper wire.
Application
Extraction and removal of fumes and gases

Folded hoses are frequently used to remove smoke, gas, dust or fumes.
They can be used at temperature by far higher than plastic ducting
hoses are used. Mounted with special clamps. Sold per meter.
Industrial hoses - dry and loose product transfer

Delivered as complete hose assemblies with fittings, e.g. male or
female thread, couplings such as CAMLOCK, GUILLEMIN, STORZ.
Used for low pressure transfer of different kinds of granulated products,
abrasive or aggressive loose products, cement, grain etc.
Protective hoses
Folded hoses are well suited to protect soft, more fragile hoses in heavy
duty working conditions.
Usually used to protect:
- external braid,
- bunch of cables (e.g. electrical),
- against kinking,
- against abrasion of a plastic hose,
- against droplets of light metals e.g. aluminium.
160

Folded hoses
GRIPLOCK G
Galvanized carbon steel
Material:
Characteristics: Flexible steel hose designed to transfer gas with fluid particles, smoke, fumes, dry loose materials
(ash, dust, grain, granulated products). Widely used also as a protection hose. Assembled on
exhaust outlets of engines to absorb vibration, noise and to limit thermal expansion. Standard
version maintains shape. FLOPPY version that does not maintain shape is available up to 76
mm diameter (code example: WH-GRIPLOCK/G-006-F).
code
I.D.
[mm]
O.D.
[mm]
bending radius
[mm]
weight
[kg/m]
WH-GRIPLOCK/G-006
WH-GRIPLOCK/G-008
WH-GRIPLOCK/G-010
WH-GRIPLOCK/G-012
WH-GRIPLOCK/G-016
WH-GRIPLOCK/G-020
WH-GRIPLOCK/G-022
WH-GRIPLOCK/G-025
WH-GRIPLOCK/G-028
WH-GRIPLOCK/G-032
WH-GRIPLOCK/G-035
WH-GRIPLOCK/G-038
WH-GRIPLOCK/G-041
WH-GRIPLOCK/G-045
WH-GRIPLOCK/G-048
WH-GRIPLOCK/G-051
WH-GRIPLOCK/G-054
WH-GRIPLOCK/G-057
WH-GRIPLOCK/G-060
WH-GRIPLOCK/G-063
WH-GRIPLOCK/G-070
WH-GRIPLOCK/G-076
WH-GRIPLOCK/G-079
WH-GRIPLOCK/G-083
WH-GRIPLOCK/G-086
WH-GRIPLOCK/G-089
WH-GRIPLOCK/G-092
WH-GRIPLOCK/G-095
WH-GRIPLOCK/G-098
WH-GRIPLOCK/G-102
WH-GRIPLOCK/G-108
WH-GRIPLOCK/G-114
WH-GRIPLOCK/G-127
WH-GRIPLOCK/G-140
WH-GRIPLOCK/G-152
WH-GRIPLOCK/G-178
WH-GRIPLOCK/G-203
WH-GRIPLOCK/G-229
WH-GRIPLOCK/G-254
WH-GRIPLOCK/G-279
WH-GRIPLOCK/G-305
WH-GRIPLOCK/G-330
WH-GRIPLOCK/G-356
WH-GRIPLOCK/G-381
WH-GRIPLOCK/G-406
WH-GRIPLOCK/G-432
WH-GRIPLOCK/G-457
6
8
10
12
16
20
22
25
28
32
35
38
41
45
48
51
54
57
60
63
70
76
79
83
86
89
92
95
98
102
108
114
127
140
152
178
203
229
254
279
305
330
356
381
406
432
457
9
11
13
16
20
24
26
29
33
37
40
45
48
52
55
58
61
64
67
70
77
83
84
88
91
94
97
100
103
107
115
121
134
147
159
185
210
236
261
286
312
337
363
388
413
439
464
25
30
33
45
55
59
63
78
90
96
103
110
115
123
129
135
143
150
158
165
180
195
260
269
280
290
302
312
322
328
350
369
403
446
485
560
640
718
797
873
950
1030
1112
1188
1268
1348
1425
0,16
0,18
0,23
0,30
0,33
0,34
0,40
0,49
0,62
0,75
0,88
1,01
1,08
1,18
1,26
1,35
1,37
1,39
1,41
1,42
1,68
2,25
2,30
2,45
2,52
2,61
2,70
2,85
2,92
3,10
3,15
3,25
3,40
3,80
4,19
4,85
5,50
6,15
6,80
7,60
8,40
8,98
9,55
10,25
10,90
11,60
12,25
161

Folded hoses
GRIPLOCK 304 (316)
AISI 304 S16 steel
(316 steel - the same parameters, code
WH-GRIPLOCK/316...)
Material:
Characteristics: Flexible steel hose designed to transfer gas with fluid particles, smoke, fumes, dry loose materials
(ash, dust, grain, granulated products). Widely used also as a protection hose. Assembled on
exhaust outlets of engines to absorb vibration, noise and to limit thermal expansion. Standard
version maintains shape. FLOPPY version that does not maintain shape is available up to 76
mm diameter (code example: WH-GRIPLOCK/304-006-F).
code
I.D.
[mm]
O.D.
[mm]
bending radius
[mm]
weight
[kg/m]
WH-GRIPLOCK/304-006
WH-GRIPLOCK/304-008
WH-GRIPLOCK/304-010
WH-GRIPLOCK/304-012
WH-GRIPLOCK/304-016
WH-GRIPLOCK/304-020
WH-GRIPLOCK/304-022
WH-GRIPLOCK/304-025
WH-GRIPLOCK/304-028
WH-GRIPLOCK/304-032
WH-GRIPLOCK/304-035
WH-GRIPLOCK/304-038
WH-GRIPLOCK/304-041
WH-GRIPLOCK/304-045
WH-GRIPLOCK/304-048
WH-GRIPLOCK/304-051
WH-GRIPLOCK/304-054
WH-GRIPLOCK/304-057
WH-GRIPLOCK/304-060
WH-GRIPLOCK/304-063
WH-GRIPLOCK/304-070
WH-GRIPLOCK/304-076
WH-GRIPLOCK/304-079
WH-GRIPLOCK/304-083
WH-GRIPLOCK/304-086
WH-GRIPLOCK/304-089
WH-GRIPLOCK/304-092
WH-GRIPLOCK/304-095
WH-GRIPLOCK/304-098
WH-GRIPLOCK/304-102
WH-GRIPLOCK/304-108
WH-GRIPLOCK/304-114
WH-GRIPLOCK/304-127
WH-GRIPLOCK/304-140
WH-GRIPLOCK/304-152
WH-GRIPLOCK/304-178
WH-GRIPLOCK/304-203
WH-GRIPLOCK/304-229
WH-GRIPLOCK/304-254
WH-GRIPLOCK/304-279
WH-GRIPLOCK/304-305
WH-GRIPLOCK/304-330
WH-GRIPLOCK/304-356
WH-GRIPLOCK/304-381
WH-GRIPLOCK/304-406
WH-GRIPLOCK/304-432
WH-GRIPLOCK/304-457
6
8
10
12
16
20
22
25
28
32
35
38
41
45
48
51
54
57
60
63
70
76
79
83
86
89
92
95
98
102
108
114
127
140
152
178
203
229
254
279
305
330
356
381
406
432
457
9
11
13
16
20
24
26
29
33
37
40
45
48
52
55
58
61
64
67
70
77
83
84
88
91
94
97
100
103
107
115
121
134
147
159
185
210
236
261
286
312
337
363
388
413
439
464
33
40
49
68
73
79
85
90
115
120
125
130
142
153
164
175
189
204
218
232
260
264
273
283
295
305
318
328
339
345
368
388
424
469
510
590
673
755
838
919
1000
1085
1169
1250
1334
1418
1500
0,10
0,15
0,18
0,23
0,31
0,34
0,38
0,40
0,48
0,55
0,60
0,65
0,70
0,77
0,82
0,87
0,97
1,03
1,08
1,14
1,26
1,71
1,77
1,86
1,93
2,00
2,06
2,13
2,20
2,29
2,42
2,56
2,85
3,14
3,41
3,99
4,55
5,14
7,93
8,71
9,52
10,30
11,11
11,89
12,67
13,48
14,26
162

Folded hoses
INTERLOCK G
Material:
Galvanized carbon steel
Seal:
Copper wire (optionally cotton or rubber)
Working temp.: Up to +500C (with copper wire seal)
Characteristics: Flexible steel hose designed to transfer dry loose materials (ash, dust, grain, granulated
products). Widely used also as a protection hose and in various applications e.g. to absorb
vibration, noise and to limit thermal expansion.
code
I.D.
[mm]
O.D.
[mm]
bending radius
[mm]
weight
[kg/m]
WH-INTERLOCK/G-020
WH-INTERLOCK/G-022
WH-INTERLOCK/G-025
WH-INTERLOCK/G-028
WH-INTERLOCK/G-032
WH-INTERLOCK/G-035
WH-INTERLOCK/G-038
WH-INTERLOCK/G-041
WH-INTERLOCK/G-045
WH-INTERLOCK/G-048
WH-INTERLOCK/G-051
WH-INTERLOCK/G-054
WH-INTERLOCK/G-057
WH-INTERLOCK/G-060
WH-INTERLOCK/G-063
WH-INTERLOCK/G-066
WH-INTERLOCK/G-070
WH-INTERLOCK/G-072
WH-INTERLOCK/G-076
WH-INTERLOCK/G-079
WH-INTERLOCK/G-083
WH-INTERLOCK/G-086
WH-INTERLOCK/G-089
WH-INTERLOCK/G-092
WH-INTERLOCK/G-095
WH-INTERLOCK/G-098
WH-INTERLOCK/G-102
WH-INTERLOCK/G-105
WH-INTERLOCK/G-108
WH-INTERLOCK/G-114
WH-INTERLOCK/G-121
WH-INTERLOCK/G-127
WH-INTERLOCK/G-130
WH-INTERLOCK/G-140
WH-INTERLOCK/G-152
WH-INTERLOCK/G-165
WH-INTERLOCK/G-178
WH-INTERLOCK/G-203
WH-INTERLOCK/G-229
WH-INTERLOCK/G-250
WH-INTERLOCK/G-279
WH-INTERLOCK/G-305
20
22
25
28
32
35
38
41
45
48
51
54
57
60
63
66
70
72
76
79
83
86
89
92
95
98
102
105
108
114
121
127
130
140
152
165
178
203
229
250
279
305
25
27
30
33
37
40
43
46
50
53
56
60
63
66
69
72
76
78
82
85
89
92
95
98
101
104
108
111
114
120
127
133
136
146
158
171
184
209
235
256
285
311
100
110
125
140
160
175
190
205
225
240
255
270
285
300
315
330
350
365
380
395
415
430
445
460
475
490
510
525
540
570
605
635
650
700
760
825
890
1015
1145
1250
1395
1525
0,59
0,71
0,86
0,92
1,00
1,09
1,19
1,29
1,39
1,47
1,59
1,72
1,84
1,95
2,08
2,18
2,26
2,34
2,41
2,47
2,52
2,56
2,69
2,80
2,86
2,90
2,96
3,04
3,10
3,24
3,38
3,51
3,58
3,80
4,07
4,35
4,62
5,17
5,72
6,26
6,80
7,31
163

Folded hoses
INTERLOCK 304 (316)
AISI 304 S16 steel
(316 steel - the same parameters,
code WH-INTERLOCK/316...)
Seal:
Copper wire (optionally cotton or rubber)
Working temp.: Up to +650C (with copper wire seal)
Material:
Characteristics: Flexible steel hose designed to transfer dry loose materials (ash, dust, grain, granulated
products). Widely used also as a protection hose and in various applications e.g. to absorb
vibration, noise and to limit thermal expansion.
code
I.D.
[mm]
O.D.
[mm]
bending radius
[mm]
weight
[kg/m]
WH-INTERLOCK/304-020
20
22
25
28
32
35
38
41
45
48
51
54
57
60
63
66
70
72
76
79
83
86
89
92
95
98
102
105
108
114
127
130
140
152
165
178
203
229
250
279
305
25
27
30
33
37
40
43
46
50
53
56
60
63
66
69
72
76
78
82
85
89
92
95
98
101
104
108
111
114
120
133
136
146
158
171
184
209
235
256
285
311
100
110
125
140
160
175
190
205
225
240
255
270
285
300
315
330
350
365
380
395
415
430
445
460
475
490
510
525
540
570
635
650
700
760
825
890
1015
1145
1250
1395
1525
0,59
0,71
0,86
0,92
1,00
1,09
1,19
1,29
1,39
1,47
1,59
1,72
1,84
1,95
2,08
2,18
2,26
2,34
2,41
2,47
2,52
2,56
2,69
2,80
2,86
2,90
2,96
3,04
3,10
3,24
3,51
3,58
3,80
4,07
4,35
4,62
5,17
5,72
6,26
6,80
7,31
164

Pressure hoses
Characteristic and application
Flexible pressure hoses and metal hose assemblies meet all working conditions and requirements that are
unattainable for rubber or plastic hoses.
Pressure metal hoses are manufactured by parallel or spiral corrugation of thin-walled metal tube. The lead and
depth of corrugations create necessary flexibility, resistance to deformation and vacuum. Widely used as complete
metal hose assemblies in no braid, single or double braid versions. Versions in metal wire braid resist internal
pressure. Used in all branches of industry to transfer: hot water, steam, oils, chemicals, gaseous and liquid gases etc.
fitting
ferrule
corrugated tube
metal braid
ferrule
fitting
Advantages of metal pressure hoses

-
-
-
-
-
-
-
-
resistance to ageing, heat, oils and hydrocarbons, various chemicals, steam, hot water, etc.,
wide range of temperature resistance ( from -270C to +800C),
non-flammability,
resistance to high pressure and vacuum,
impermeability to penetrating gases and liquids,
large diameter and low temperature flexibility, kink resistance,
high thermal and electrical conductivity,
permanent assembly of fittings (welding), relatively safe run of possible breakdown.
Proper selection, installation and use of a hose assembly

Due to unique construction of pressure metal hoses it is required to contact Sales or Technical Department of
TUBES INTERNATIONAL in order to select the hose properly. Installation and usage guidelines of pressure metal
hose assemblies are outlined in a manual on the following page.
Important notes on pressure metal hoses:
-
-
-
-
follow installation and handling guides given in the manual,

the hose must not be twisted during installation and usage,
dynamic hose flexing has to be defined and taken into consideration,
it is necessary to match the material of the hose and fittings taking into account corrosive action of both media
to be transferred and external conditions,
- note must be taken of vibrations occurrence and its influence,
- high flow velocity in a corrugated hose can cause turbulence, big pressure drop and occurrence of dangerous
vibrations,
- temperature correction factor has to be taken into consideration - values given in the tables apply to working
pressure at +20C.
165

Pressure steel assemblies complying with ISO 10380
ISO 10380 (PN-EN ISO 10380:2003) defines material specifications as well as construction and pressure
requirements for flexible steel hoses. One of the conditions is to ensure the life of 10 000 cycles of standard flexing
of the hose at minimum bend radius and maximum working pressure defined for dynamic conditions. However
TUBES INTERNATIONAL also provides hoses whose cycle life of 50000 is guaranteed.
Hose material
The most popular hose material:
- AISI 304 stainless steel (braid),
- AISI 321 stainless steel (hose),
- AISI 316 L stainless steel (hose and braid),
- copper alloy: bronze (hose and braid, used up to +200C),
- nickel alloys: monel, Inconel (hose and braid, used to achieve high corrosion resistance, against chlorine in
particular).
Temperature correction factors of metal hoses
Temperature correction factor (compliant with EN ISO 10380:2003)
applies to all metal hoses, except B-FLEX and C-FLEX
steel
temperature [C]
-200
-100
+20
+50
+100 +150 +200 +250 +300 +350 +400 +450 +500 +550 +600 +650 +700 +750
321
1,00
1,00
1,00
1,00
0,93
0,83
0,78
0,74
0,70
0,66
0,64
0,62
0,60
0,59
0,58
316L
1,00
1,00
1,00
1,00
0,90
0,73
0,67
0,61
0,58
0,53
0,51
0,50
0,49
0,47
0,47
* - application after confirmation with Technical Department of TUBES INTERNATIONAL
Temperature correction factor for B-FLEX and C-FLEX

temperature [C]
-200
+20
+50
+100
+150
+200
+250
+300
+350
+400
+450
+500
+550
+600
+650
+700
0,89
0,72
0,64
0,58
0,54
0,5
0,48
0,46
0,44
0,43
0,43
0,34
0,19
0,1
Assembly of metal hose fittings

The fittings of flexible pressure steel assemblies can be installed in the following ways:
- twisting (special kind of a reusable fittings, allowing direct assembly on an installation, with limited pressure
parameters),
- soft soldering or brazing - with limited temperature resistance,
- TIG method (tungsten inert gas welding) - the most popular method.
Steel hose fittings can be made of carbon steel, AISI 304 and AISI 316 stainless steel as well as copper alloys
(brass, bronze).
NOTE !!!
Carbon steel fittings should not be used at temperatures below -20C and above +400C.
166

Pressure metal hoses installation and usage manual
A steel hose has to be properly installed to prolong its life and to ensure faultless service. The main reason of failure
is material fatigue on the hose corrugation. It is vital to remember that all elastic assemblies have limited service
life. If they are used to deliver dangerous media (e.g. hot or flammable substances, dangerous chemicals), test
and inspections should be carried out regularly.
Hose breakage prevention
too small
bending radius
correct
incorrect
Bending radius of a steel hose should not be smaller than the one given in the manual to avoid material fatigue or
premature damage. It is necessary to prevent sharp bends in the hose near its fittings.
Hose kinking prevention
incorrect
correct
It is kinking of a hose that causes failure or premature wear. So as to prevent hose kinking a swivel flange should
be installed on one of the hose ends. The hose should always be installed in such a way that its movement is the
same as its symmetry axis.
Hose elongation and squeezing prevention
correct
incorrect
If a hose is squeezed or stretched, its life is significantly shortened.

Hose abrasion prevention
If a hose is installed in a position causing rubbing against other objects, its service life is shorter.
NEVER EXCEED HOSE MAXIMUM WORKING PRESSURE !!!
A hose must not be used under the pressure higher than its working pressure. Working temperature should always
be taken into account and the maximum working pressure should be adjusted by proper factor. Contact Technical
Department of TUBES INTERNATIONAL in case of any problems.
Hose damage
Hoses with any signs of failure or leakage must be exchanged immediately.
167

Pressure hoses - steel
METALFLEX / M
Internal layer: AISI 316L steel corrugated hose
Reinforcement: AISI 304 steel single braid
Working temp.: From -270C to +700C (working
pressure depends on temperature)
Characteristics: Steel hose designed to transfer chemicals, gases and steam under pressure or in high vacuum
conditions. Available with fittings described further in the catalogue on request. Safety factor 4:1.
code
I.D.
[mm]
O.D.
[mm]
TB-METALFLEX/M-010
TB-METALFLEX/M-012
TB-METALFLEX/M-016
TB-METALFLEX/M-020
TB-METALFLEX/M-025
TB-METALFLEX/M-032
TB-METALFLEX/M-040
TB-METALFLEX/M-050
TB-METALFLEX/M-065
TB-METALFLEX/M-075
TB-METALFLEX/M-100
TB-METALFLEX/M-125
TB-METALFLEX/M-150
TB-METALFLEX/M-200
10,1
12,2
16,2
20,3
25,4
32,5
41,7
52
66
76
103
125
151
197,5
15,8
18,5
23,8
28,3
34
44,8
53,6
64
79,5
93,5
120,5
152
182
231,8
working
pressure
[bar]
110
80
64
64
50
40
30
28
24
18
16
12
10
8
static
dynamic
bending radius bending radius
[mm]
[mm]
50
130
65
140
65
160
70
170
100
190
115
265
150
290
160
320
175
430
210
520
225
640
318
900
353
1050
456
1180
weight
[kg/m]
0,23
0,26
0,33
0,53
0,70
1,14
1,37
1,61
2,15
2,29
3,25
5,78
6,20
9,90
METALICA
Internal layer: AISI 316L steel corrugated hose
Reinforcement: AISI 304 steel single braid
Characteristics: General purpose steel hose. Supplied as a complete hose assembly with fittings described
further in the catalogue. No braid version available as well. Safety factor 4:1.
168
code
I.D.
[mm]
O.D.
[mm]
TB-METALICA-06
TB-METALICA-08
TB-METALICA-10
TB-METALICA-12
TB-METALICA-16
TB-METALICA-20
TB-METALICA-25
TB-METALICA-32
TB-METALICA-40
TB-METALICA-50
6,1
8,2
10,05
12,25
16,2
20,3
25,4
34,3
40
50,2
10,7
13,6
15,5
18,3
23,8
28,6
34,3
43
52
62,4
static working
pressure
[bar]
150
132
100
70
64
43
49
35
38
26
min. bending radius

[mm]
multiple bent
one bent
60
25
124
32
130
38
140
45
160
58
170
70
190
85
260
105
300
130
320
160

PARNOR
AISI 321 steel corrugated hose
(316L for diameters: 6, 8,10 and 125 mm)
Reinforcement: Single AISI 304 steel braid as a standard
Internal layer:
Characteristics: The highest quality steel hose designed to transfer chemicals, gases and steam under
pressure or in high vacuum conditions. Meets the requirements of ISO 10380 standard. Parallel
corrugations of the hose obtained by hydroforming ensure extreme resistance to fatigue and
stress corrosion. Suitable for dynamic application (when it bends at regular rate), where its
service life in EN ISO 10380 conditions is as long as 50.000 cycles at the maximum working
pressure for dynamic conditions. The highest quality of this hose is assured by pressure and
tightness tests carried out on each production level. Available as no braid or double braid version
as well. Supplied as a complete hose assembly with fittings for steel hoses. If the hose is used
at elevated temperature, its working pressure should be reduced by temperature correction
factor according to EN ISO 10380 (given in the technical description at the beginning of this
chapter). Safety factor 4:1 (under dynamic conditions).
code
DN
[mm]
O.D.
[mm]
TB-PARNOR-006
TB-PARNOR-008
TB-PARNOR-010
TB-PARNOR-012
TB-PARNOR-015
TB-PARNOR-020
TB-PARNOR-025
TB-PARNOR-032
TB-PARNOR-040
TB-PARNOR-050
TB-PARNOR-065
TB-PARNOR-080
TB-PARNOR-100
TB-PARNOR-125
TB-PARNOR-150
6
8
10
12
15
20
25
32
40
50
65
80
100
125
150
11,4
15,2
17,8
20,2
24,1
29,9
36,4
45,4
54,4
67,3
83,4
102,6
129,5
155
177
dynamic conditions
working
min. bending
pressure
radius
[bar]
[mm]
140
110
115
130
100
150
80
165
63
195
50
225
40
260
40
300
32
340
32
390
25
460
23
660
15
750
13
1000
11
1250
static conditions
working
min. bending
pressure
radius
[bar]
[mm]
200
23
162
28
131
32
115
39
77
50
69
60
54
73
46
90
37
115
40
140
31
175
30
240
20
290
16
340
14
390
TUBES INTERNATIONAL was granted GERMANISCHER LLOYD and DNV Certificates for producing
PARNOR stainless steel hose assemblies (from DN 6 DN 100) for shipbuilding and marine
industry applications. Please contact Technical Department for more information.
169

PARRAP
AISI 321 steel corrugated hose
(316L for diameters: 6, 8,10 and125 mm)
Reinforcement: Single AISI 304 steel braid as a standard
Internal layer:
Characteristics: Extremely flexible, top quality steel hose designed to transfer chemicals, gases, steam under
pressure or in high vacuum conditions. Thanks to exceptional omega-shaped corrugations
it is strongly recommended for application demanding highly flexible connection. Meets the
requirements of ISO 10380 standard. Parallel corrugations of the hose obtained by hydroforming
ensure extreme resistance to fatigue and stress corrosion. Suitable for dynamic application
(when it bends at regular rate), where its service life in EN ISO 10380 conditions is as long as
50.000 cycles at the maximum working pressure for dynamic conditions. The highest quality
of this hose is assured by pressure and tightness tests carried out on each production level.
Available as no braid or double braid version as well. Supplied as a complete hose assembly with
fittings for steel hoses. If the hose is used at elevated temperature, its working pressure should
be reduced by temperature correction factor according to EN ISO 10380 (given in the technical
description at the beginning of this chapter). Safety factor 4:1 (under dynamic conditions).
code
DN
[mm]
O.D.
[mm]
TB-PARRAP-006
TB-PARRAP-008
TB-PARRAP-010
TB-PARRAP-012
TB-PARRAP-015
TB-PARRAP-020
TB-PARRAP-025
TB-PARRAP-032
TB-PARRAP-040
TB-PARRAP-050
TB-PARRAP-065
TB-PARRAP-080
TB-PARRAP-100
TB-PARRAP-125
TB-PARRAP-150
6
8
10
12
15
20
25
32
40
50
65
80
100
125
150
11,4
15,2
17,8
20,2
24,1
29,9
36,4
45,4
54,4
67,3
83,4
102,6
129,5
155
177
dynamic conditions
working
min. bending
pressure
radius
[bar]
[mm]
150
110
115
130
115
150
80
124
63
146
55
169
40
195
40
225
32
255
32
293
25
345
23
495
15
563
13
1000
11
1250
static conditions
working
min. bending
pressure
radius
[bar]
[mm]
200
20
162
20
131
20
115
25
77
32
69
38
54
45
46
58
37
70
40
85
31
105
30
180
20
218
16
255
14
290
TUBES INTERNATIONAL was granted GERMANISCHER LLOYD and DNV Certificates for producing
PARRAP stainless steel hose assemblies (from DN 6 DN 100) for shipbuilding and marine industry
applications. Please contact Technical Department for more information.
170

HP, THP
AISI 316L steel corrugated hose (DN 32,
DN 100 - AISI 321 steel)
Reinforcement: Single (HP) or double (THP)
AISI 304 steel braid
Internal layer:
Characteristics: Exclusive high pressure steel hose with heavy wall and close pitch, annular corrugation obtained
by hydroforming. Designed to transfer chemicals, gases, steam under pressure and in high
vacuum conditions. Designed according to the requirements of EN ISO 10380 class 1. Supplied
as a complete hose assembly with fittings for steel hoses on request . If the hose is used at
elevated temperature, its working pressure should be reduced by temperature correction factor
according to EN ISO 10380 (given in the technical description at the beginning of this chapter).
Safety factor 4:1 (under dynamic conditions).
HP (single braid)
code
DN
[mm]
O.D.
[mm]
TB-HP-006
TB-HP-010
TB-HP-012
TB-HP-020
TB-HP-025
TB-HP-032
TB-HP-040
TB-HP-050
TB-HP-080
TB-HP-100
6
10
12
20
25
32
40
50
80
100
11,4
17,8
20,2
29,1
38
46,5
54,9
67,3
99
129,5
code
DN
[mm]
O.D.
[mm]
TB-THP-006
TB-THP-010
TB-THP-012
TB-THP-020
TB-THP-025
TB-THP-032
TB-THP-040
TB-THP-050
TB-THP-080
TB-THP-100
6
10
12
20
25
32
40
50
80
100
13
19,4
21,8
30,7
40
49
57,4
69,8
102
132,5
dynamic conditions
working
min. bending
pressure
radius
[bar]
[mm]
180
110
145
150
140
165
85
225
78
215
65
300
61
280
55
390
25
660
24
750
static conditions
working
min. bending
pressure
radius
[bar]
[mm]
225
25
166
38
175
45
99
70
91
85
78
105
68
130
62
160
33
240
27
290
dynamic conditions
working
min. bending
pressure
radius
[bar]
[mm]
255
110
195
150
185
165
125
225
124
260
115
300
90
340
78
390
50
660
45
750
static conditions
working
min. bending
pressure
radius
[bar]
[mm]
293
25
223
38
213
45
147
70
142
85
134
105
104
130
92
160
66
240
51
290
THP (double braid)
171

B-FLEX
AISI 321 S31 steel corrugated hose
(AISI 316L steel to special order)
Reinforcement: AISI 304 steel single or double braid
Internal layer:
Characteristics: Steel hose designed to transfer chemicals, gases, steam under pressure or in high vacuum
conditions. Available on request with fittings described further in the catalogue. No braid version
available as well.
B-FLEX (single braid)
code
DN
[mm]
O.D.
[mm]
TB-BFLEX1-006
TB-BFLEX1-010
TB-BFLEX1-012
TB-BFLEX1-016
TB-BFLEX1-020
TB-BFLEX1-025
TB-BFLEX1-032
TB-BFLEX1-040
TB-BFLEX1-050
TB-BFLEX1-065
TB-BFLEX1-080
TB-BFLEX1-100
TB-BFLEX1-125
TB-BFLEX1-150
TB-BFLEX1-200
TB-BFLEX1-250
6
10
12
16
20
25
32
40
50
65
80
100
125
150
200
250
15
18
23
28
31,5
37,5
47
55,5
71
88,5
100
130
169
183
241
290
code
DN
[mm]
O.D.
[mm]
TB-BFLEX2-006
TB-BFLEX2-010
TB-BFLEX2-012
TB-BFLEX2-016
TB-BFLEX2-020
TB-BFLEX2-025
TB-BFLEX2-032
TB-BFLEX2-040
TB-BFLEX2-050
TB-BFLEX2-065
TB-BFLEX2-080
TB-BFLEX2-100
TB-BFLEX2-125
TB-BFLEX2-150
TB-BFLEX2-200
TB-BFLEX2-250
6
10
12
16
20
25
32
40
50
65
80
100
125
150
200
250
17,6
20,6
25,5
30
34,6
40,5
51
60
75
91
105
136
165
188
246
295
working
pressure
[bar]
140
100
90
65
55
48
38
34
31
27
24
15
14
9
8
6
bursting
pressure
[bar]
560
400
360
260
220
192
152
136
124
108
96
60
56
36
32
24
dynamic *
bending radius
[mm]
100
125
125
150
150
175
200
250
350
500
525
625
750
900
1020
1220
working
pressure
[bar]
250
155
131
105
93
77
62
46
43
37
34
18
17
14
14
10
bursting
pressure
[bar]
1000
620
524
420
372
308
248
184
172
148
136
72
68
56
56
40
dynamic *
bending radius
[mm]
100
125
125
150
150
175
200
250
350
500
525
625
750
900
1020
1220
weight
[kg/m]
0,28
0,39
0,50
0,55
0,62
0,80
1,15
1,50
2,10
2,65
3,13
4,15
6,40
7,85
11,20
15,30
B-FLEX (double braid)
* static bending radius is 60% of dynamic bending radius
172
weight
[kg/m]
0,40
0,56
0,71
0,75
0,90
1,13
1,70
2,20
3,05
3,90
4,55
6,05
9,10
11,50
16,20
20,80

C-FLEX
AISI 321 S31 steel corrugated hose
Reinforcement: AISI 304 steel single or double braid
Internal layer:
Characteristics: Steel hose designed to transfer chemicals, gases, steam under pressure or in high vacuum
conditions. Recommended for applications demanding increased resistance to vibrations. Available
on request with fittings described further in the catalogue. No braid version available as well.
C-FLEX (single braid)
code
DN
[mm]
O.D.
[mm]
TB-CFLEX1-006
TB-CFLEX1-010
TB-CFLEX1-012
TB-CFLEX1-020
TB-CFLEX1-025
TB-CFLEX1-032
TB-CFLEX1-040
TB-CFLEX1-050
TB-CFLEX1-065
TB-CFLEX1-080
TB-CFLEX1-100
TB-CFLEX1-125
TB-CFLEX1-150
6
10
12
20
25
32
40
50
65
80
100
125
150
15
18
23
31,5
37,5
47
56,5
71
86,5
100
130
159
183
code
DN
[mm]
O.D.
[mm]
TB-CFLEX2-006
TB-CFLEX2-010
TB-CFLEX2-012
TB-CFLEX2-020
TB-CFLEX2-025
TB-CFLEX2-032
TB-CFLEX2-040
TB-CFLEX2-050
TB-CFLEX2-065
TB-CFLEX2-080
TB-CFLEX2-100
TB-CFLEX2-125
TB-CFLEX2-150
6
10
12
20
25
32
40
50
65
80
100
125
150
17,5
20,5
25,5
34,5
40,5
51,5
60,5
75,5
91,5
106
136
165
188
working
pressure
[bar]
160
138
103
62
52
42
38
34
31
27
17
16
10
bursting
pressure
[bar]
640
552
412
248
208
168
152
136
124
108
68
64
40
dynamic *
bending radius
[mm]
75
90
100
115
125
150
200
275
350
400
500
660
760
working
pressure
[bar]
275
172
155
110
90
69
52
48
41
38
20
19
15
bursting
pressure
[bar]
1100
690
620
440
360
276
208
192
164
152
80
76
60
dynamic *
bending radius
[mm]
75
90
100
115
125
150
200
275
350
400
500
660
760
weight
[kg/m]
0,33
0,48
0,60
0,75
0,95
1,40
1,75
2,45
3,00
3,55
4,80
7,50
9,10
C-FLEX (double braid)

weight
[kg/m]
0,45
0,65
0,80
1,00
1,25
1,95
2,45
3,40
4,20
5,00
6,70
10,20
12,70
* static bending radius is 60% of dynamic bending radius
173

Fittings for metal hoses
TUBES INTERNATIONAL supplies complete steel hose assemblies with fittings made of carbon steel, AISI 304
or AISI 316 steel. The types of fittings dedicated for steel hoses are listed below. The fittings such as: metric, JIC,
NPT, custom made (according to customer specification) and many more are available on request.
BSPT (taper) thread
BSP thread, cone 60
AF1
BSP thread, cone 60
BSP thread, cone 60
AF2
BSP thread
BSP thread, flat seal
AF6
Union with BSPT thread
AF7
Union with BSP thread
Pipe fitting
Fixed flange
AF10
AF14
AF12/AF2
AF11/AF2
Weld-in fitting
AF5
AF9
Swivel flange
AF3
AF4
Note:
1) The use of fittings made of carbon steel is limited by its working temperature ranging from -20C to +400C and
their limited corrosion resistance.
2) Swivel and fixed flanges are available according to DIN (PN-EN 1092-1) e.g. PN6, PN16, PN40 and according
to ANSI (ASA150, ASA300).
Flange dimensions are given in the tables in TECHNICAL INFORMATION at the end of the catalogue.
174

Standard fittings for pressure metal hoses
picture
AF1 type
BSPT male thread
L max
AF2 type
AF2 type
BSP female thread,
cone 60 seal
L max
AF7 type
BSP female thread - fixed
L max
code
hose DN
[mm]
thread size
[inch]
L max
[mm]
wrench size
[mm]
TB-AF1-006
TB-AF1-008-04
TB-AF1-008-06
TB-AF1-010
TB-AF1-012-06
TB-AF1-012
TB-AF1-015-08
TB-AF1-015
TB-AF1-015-12
TB-AF1-020
TB-AF1-025
TB-AF1-032
TB-AF1-040
TB-AF1-050
TB-AF1-065
TB-AF1-080
TB-AF1-100
TB-AF2-006
TB-AF2-008-04
TB-AF2-008-06
TB-AF2-010
TB-AF2-012
TB-AF2-015-08
TB-AF2-015
TB-AF2-015-12
TB-AF2-020
TB-AF2-025
TB-AF2-032
TB-AF2-040
TB-AF2-050
TB-AF2-065
TB-AF2-080
TB-AF2-100
TB-AF7-006
TB-AF7-008-04
TB-AF7-008-06
TB-AF7-010
TB-AF7-012
TB-AF7-015-08
TB-AF7-015
TB-AF7-015-12
TB-AF7-020
TB-AF7-025
TB-AF7-032
TB-AF7-040
TB-AF7-050
TB-AF7-065
TB-AF7-080
TB-AF7-100
6
8
8
10
12
12
15/16
15/16
15/16
20
25
32
40
50
65
75/80
100
6
8
8
10
12
15/16
15/16
15/16
20
25
32
40
50
65
75/80
100
6
8
8
10
12
15/16
15/16
15/16
20
25
32
40
50
65
75/80
100
1/4
1/4
3/8
3/8
3/8
1/2
1/2
5/8
3/4
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
1/4
1/4
3/8
3/8
1/2
1/2
5/8
3/4
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
1/4
1/4
3/8
3/8
1/2
1/2
5/8
3/4
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
38
38
42
42
44
51
54
54
58
58
72
79
94,5
104
119
128
137
38,5
41,1
43,5
43,5
49,5
52,5
54
56
56
60,5
69
84
91
100
96
106
36,5
39,5
40,5
40
50
51
52,5
54
55,5
68
74
86
17
17
19
19
19
24
24
27
30
30
36
46
50
65
80
hook wrench
hook wrench
19
19
22
22
27
27
30
32
32
41
50
55
70
85
hook wrench
hook wrench
19
19
22
22
27
27
30
32
32
41
46
55
175

picture
AF14 type
BSP female thread,
flat seal
L max
AF2M type
Metric female thread,
cone 24/60 seal
L max
176
code
hose DN
[mm]
TB-AF14-006
TB-AF14-008-04
TB-AF14-008-06
TB-AF14-010
TB-AF14-012-06
TB-AF14-012
TB-AF14-015-08
TB-AF14-015
TB-AF14-015-12
TB-AF14-020
TB-AF14-025
TB-AF14-032
TB-AF14-040
TB-AF14-050
TB-AF14-065
TB-AF14-080
TB-AF14-100
6
8
8
10
12
12
15/16
15/16
15/16
20
25
32
40
50
65
75/80
100
TB-AF2M111-14-006
TB-AF2M111-16-008
TB-AF2M111-18-010
TB-AF2M111-22-012
TB-AF2M111-26-015
TB-AF2M111-30-020
TB-AF2M111-36-025
TB-AF2M111-45-032
TB-AF2M111-52-040
6
8
10
12
15
20
25
32
40
TB-AF2M112-16-006
TB-AF2M112-18-006
TB-AF2M112-20-008
TB-AF2M112-22-010
TB-AF2M112-24-012
TB-AF2M112-30-015
TB-AF2M112-36-020
TB-AF2M112-42-025
TB-AF2M112-52-032
TB-AF2M112-52-040
6
6
8
10
12
15
20
25
32
40
thread size
[inch]
1/4
1/4
3/8
3/8
3/8
1/2
1/2
5/8
3/4
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
light series (L)
M14x1,5
M16x1,5
M18x15
M22x1,5
M26x1,5
M30x2
M36x2
M45x2
M52x2
heavy series (S)
M16x1,5
M18x1,5
M20x1,5
M22x1,5
M24x1,5
M30x2
M36x2
M42x2
M52x2
M52x2
L max
[mm]
wrench size
[mm]
38,1
41,1
44,1
44,5
47
49
52
53,4
56,4
56,7
60,5
68,7
84
90
99,3
94,4
99,9
19
19
22
22
22
27
27
30
32
32
41
50
55
70
85
hook wrench
hook wrench
17
22
27
27
32
41
41
50
60
22
27
27
27
32
41
41
50
60
60

picture
AF4 type
Swivel flange PN16
L max
AF3 type
Fixed flange PN16
L max
AF4P type
Swivel flange PN16 - flat
L max
AF3P type
Fixed flange PN16 - flat
L max
code
hose DN
[mm]
L max
[mm]
TK-KOPS-015 + TK-KO-015
15
56
20
58
25
65
32
67
40
75
50
75
65
80
80
85
100
87
125
150
TK-KSS-015
15
56
TK-KSS-020
20
58
TK-KSS-025
25
65
TK-KSS-032
32
67
TK-KSS-040
40
75
TK-KSS-050
50
75
TK-KSS-065
65
80
TK-KSS-080
80
85
TK-KSS-100
100
87
TK-KSS-125
125
TK-KSS-150
150
TK-KOPP-015 + TK-KO-015
15
30
20
32
25
39
32
39
40
44
50
46
65
51
80
53
100
55
125
150
TK-KSP-015
15
32
TK-KSP-020
20
34
TK-KSP-025
25
41
TK-KSP-032
32
43
TK-KSP-040
40
48
TK-KSP-050
50
50
TK-KSP-065
65
57
TK-KSP-080
80
59
TK-KSP-100
100
61
TK-KSP-125
125
TK-KSP-150
150
177

Metal hose assemblies designed for particular application - examples
DN75 hose assembly (hose TB-METALFLEX/M-075) in DN100

steam-heated jacket hose (TB-ME- TALFLEX/M-100). Length 800
mm. Swivel flanges PN16 DN80 and DN20 (for steam) welded at
the hose ends. Used in plastic processing.
Medium: phthalic or maleic anhydride / steam.
Working pressure: 3 bar / 9 bar.
Internal temperature: +180C / +180C.
DN25 hose assembly (hose TB-METALFLEX/M-025) with vulcanized

silicone protective cover (AF-CFX-TAPE-SIL) that is easy to clean
and protects the wire braid from dirt. Length 400 mm. PN16 DN25
flanges welded at the hose ends. Used in pharmaceutical industry.
Medium: process steam.
Working pressure: 4 bar.
Internal temperature: +155C.
DN15 hose assembly (hose TB-PARNOR-015) with WHGRIPLOCK/304-045 hose applied as protective cover and additional
steel cable protecting fittings from bursting from the hose. Length
3000 mm. Fittings with M26x1,5 female thread welded at the hose
ends. Widely used to transfer gases.
Medium: liquid CO2.
Internal temperature: -25C.
DN6 hose assembly (hose TB-THP-006) designed to transfer

oxygen with additional steel cable protecting fittings from bursting
from the hose. Length 2000 mm. 11/16-16 UNF LH male thread
and one side and 3/8 BSP LH male thread fittings on the other side.
Widely used to transfer dangerous gases.
Medium: oxygen.
External temperature: to +80C.
DN100 hose assembly (hose TB-METALFLEX/M-100) with Nomex

seal for electrical insulation. Length 3200 mm. Swivel flanges PN16
DN100 welded at the hose ends. Used for cooling systems in
energetic industry.
Medium: water.
External temperature: +150C.
178
INDUSTRIAL HOSES - PTFE

General information about PTFE hoses
For over sixty years Polytetrafluoroethylene (PTFE, brand names: tarflen, teflon, fluon) has been known and
recognized for its unique properties. It is widely used in all branches of industry, including production of flexible
hoses of various construction and application.
PTFE unique properties:
- Excellent chemical resistance. It does not dissolve or swell in any of known solvents. It is resistant to highly
aggressive acids and alkalis. Only very few, very rare substances (fluorine, boiling alkali metals, oxygen bifluoride,
chlorine trifluoride) can affect PTFE.
- Wide range of thermal resistance. PTFE remains flexible even at the temperature of liquid helium (-269C).
Crystalline melting point of PTFE is +327C, and at +415C decomposition of PTFE takes place. Working
temperature for hoses made of PTFE usually ranges from -70C to + 260C depending on the hose design
(pressure and mechanical parameters of PTFE start to decrease when the temperature rises above +130C).
- Resistance to ageing and weather conditions. PTFE is hydrophobic, entirely resistant to ozone, oxygen, light
and UV radiation. Samples exposed for several dozen of years to diverse climate conditions have not shown
any changes to PTFE properties.
- PTFE has a very low coefficient of friction (from 0.02 to 0.2) and a low value of surface energy. Therefore hoses
made of PTFE have self-cleaning properties (substances do not stick to hose walls) so the transfer is very
hygienic.
- Good electrical properties, high resistivity.
- Self-extinguishing properties.
- Moderate resistance to abrasion.
Other materials similar to PTFE
Hoses can be manufactured not only from PTFE but also from PTFE copolymers. They usually feature high
chemical and thermal resistance but other properties are slightly different in comparison to PTFE (better mechanical
resistance, better processing qualities):
-
-
-
-
FEP (Teflon FEP, DuPont),

PFA, MFA (Teflon PFA, DuPont),
ETFE (Tefzel, DuPont),
ECTFE (Halar).
Production and construction of PTFE hoses

Because of high viscosity even at temperatures close to thermal decomposition (+415C), PTFE hoses are
manufactured by extruding the compound of lubricant (paraffin oil) and PTFE powder.
Types of PTFE hose construction:
- Smooth and corrugated hoses with no braid. Used for low pressure applications. Translucent, PTFE wall allows
the visual control of the flow.
- Smooth hoses with a single or double external braid made of stainless steel. Widely used for almost all media:
chemicals, gases, steam, oils, lubricants, fuel, paint, adhesives, foodstuffs in all branches of industry. The
combination of relatively high working pressure of the hoses (up to around 400 bar) and PTFE unique properties
result in a universal and irreplaceable solution for recent industrial technology.
- Corrugated hoses with external braids made of stainless steel or different materials. Sometimes reinforced with
a steel wire helix between PTFE and the external braid. Manufactured in various construction options with lower
working pressure but higher flexibility than smooth bore hoses.
- Smooth bore hoses with an extruded PTFE liner with a textile cord, steel wire helix reinforcement and an external
layer made of rubber. All layers are vulcanized and permanently integrated with the PTFE internal layer - as in
a standard rubber hose. Used mainly in chemical industry.
179

Static electricity - antistatic PTFE
As virgin PTFE is nonconductive and features high surface electrical resistivity (R = 1017 ), potential hazards
connected with static electricity should always be carefully considered. If a transferred substance is a bad electrical
conductor and has electrifying properties, an electrostatic charge builds up on the inside of PTFE layer. The higher
the flow rate, the faster the buildup of charge. The charge may build up faster than it is discharged through PTFE to
the other parts of the installation and to the ground. When voltage reaches the sufficient level a sudden discharge
of electric charges occurs. It may progress as follows:
- discharge to the stainless steel braid causes a micro hole or a plasma arc (at high temperature) that may lead
to a leakage and ignition of flammable substances,
- an electrical spark occurs on the hose surface that has enough energy to ignite a flammable substance,
- discharge to external parts or people who are handling the hose.
sudden discharge of electric charge to

the braid, leakage and electrical spark
SS braid
electric charge on PTFE wall
To avoid the problem of static electricity an antistatic version of PTFE (with addition of graphite) is used. This
version enables lowering the resistance between the internal layer of the hose wall and the grounded steel fitting
below 108 and discharging the electric charges.
Antistatic version of PTFE hoses:
- standard version (wall made of antistatic PTFE) - electric charges are discharged to the braid and fittings,
- only internal layer is antistatic - electric charges are discharged along the internal layer to the hose ends.
Electrical continuity within installation
Electrical continuity within installation is a notion completely different from antistatic properties of a hose. Electrical
continuity is ensured if a direct electrical connection with the use of a conductor (copper wire, braid) is provided
between fittings. Resistance measured between hose fittings should not exceed 10 .
Media that require antistatic PTFE
Substances such as: organic solvents (acetone, toluene, xylene), alcohol, fuel (automotive, aviation,
heating oil), solids (powder, dust), steam and many more require antistatic PTFE hoses.
Substances that do not require antistatic PTFE: non-organic products (salts, acids, alkalis), some
alcohols, glycol, water, dry and pure gases, dry and pure steam.
Antistatic PTFE for foodstuffs
Because many substances conveyed in food industry require antistatic PTFE, a special version of antistatic PTFE
certified for foodstuffs is used.
Application of different versions of PTFE should be always confirmed with Sales or Technical Department of
180
SMTO
Material:
PTFE
Working temp.: From -70C to +260C (working pressure
depends on temperature)
Characteristics:
Lightweight, translucent hose with a smooth, non-porous surface. High chemical resistance.
It is not suitable for push-in fittings.
code
I.D.
[mm]
O.D.
[mm]
working pressure
[bar]
AF-SMTO-03
AF-SMTO-04
AF-SMTO-06
AF-SMTO-08
AF-SMTO-09
3,18
4
6
8
9
5,2
6
8
10
12
2
2
2
2
2
FXTO
Material:
PTFE
Characteristics:
Lightweight, translucent hose with smooth inside and corrugated outside PTFE. The construction
combines properties of smooth hoses (ease of cleaning, uninterrupted flow) and high flexibility
that is specific to corrugated hoses. An antistatic version is also available.
code
I.D.
[mm]
O.D.
[mm]
working pressure
[bar]
AF-FXTO-06
AF-FXTO-08
AF-FXTO-10
AF-FXTO-13
AF-FXTO-16
AF-FXTO-19
AF-FXTO-25
6,8
7,9
10
13,6
16,7
19,8
26,3
9
10
12,5
16,2
20
23,2
30,3
4
4
4
4
3
3
2
181
CHEMFLUOR PTFE
Material:
PTFE
Characteristics:
Lightweight, translucent hose with a smooth, non-porous surface. Excellent chemical resistance.
It is not suitable for push-in fittings. Widely used in all branches of industry. Shore hardness
(D) 58, density 2,18. Safety factor 3:1.
Hoses with internal diameter 2 8 mm are available with 0,5 mm thick wall.
code
I.D.
[mm]
tolerance
[+/- mm]
wall
thickness
[mm]
tolerance
[+/- mm]
VE-TFEAUC4025
VE-TFEA4C4100
VE-TFEBEC4025
VE-TFEBPC4050
VE-TFEBZC4025
VE-TFECJC4025
VE-TFEC4C4025
VE-TFEDPC4100
VE-TFED9C4025
VE-TFEEUC4040
VE-TFEFEC4030
2
3
4
5
6
8
10
12
14
16
18
0,15
0,15
0,15
0,20
0,20
0,30
0,30
0,30
0,30
0,35
0,35
1
1
1
1
1
1
1
1
1
1
1
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
0,15
working pressure
[bar]
+23C
20
16
13
11
10
8
6,5
5,5
5
4
4
+120C
10
8
6,5
5,5
5
4
3
2,5
2,5
2
2
weight
[g/m]
20,60
27,50
34,40
41,30
48,10
61,90
75,60
89,40
103,10
116,90
130,70
CHEMFLUOR FEP
Material:
FEP
Characteristics:
Lightweight, translucent hose made of fluorinated ethylene propylene with excellent chemical
resistance. It is not suitable for push-in fittings. Widely used in all branches of industry, labs,
etc. Shore hardness (D) 55, density 2,17. The hose compliant with FDA requirements can be
supplied on request. Safety factor 3:1.
code
I.D.
[mm]
tolerance
[+/- mm]
wall
thickness
[mm]
tolerance
[+/- mm]
VE-CHEMFEP-02/04
VE-CHEMFEP-04/06
VE-CHEMFEP-06/08
VE-CHEMFEP-08/10
VE-CHEMFEP-10/12
VE-CHEMFEP-12/14
2
4
6
8
10
12
0,1
0,1
0,1
0,1
0,1
0,1
1
1
1
1
1
1
0,1
0,1
0,1
0,1
0,1
0,1
182
working pressure
[bar]
+23C
20
13
10
8
6,5
5,5
+120C
10
6,5
5
4
3
2,5
standard
length
[m]
50
50
50
50
50
50
CHEMFLUOR PFA
Material:
Working temp.:
Hardness:
Density:
Characteristics:
PFA
From -160C to +270C
60 - 65 Shore (A)
2,17 g/cm3
Lightweight, translucent hose with a smooth, non-porous surface. Resistant to cracks caused
by excessive stress. Excellent resistance to UV radiation. The hose complaint with FDA and
USP Class VI standards (approval for use in pharmaceutical industry) can be supplied on
request. Used in biomedical and pharmaceutical industry. Good insulating properties - suitable
for electric cable insulation. Because of high plasticity, PFA is particularly recommended for
industrial robots and installations that are prone to vibration.
code
I.D.
[mm]
tolerance
[+/- mm]
wall
thickness
[mm]
tolerance
[+/- mm]
standard
length
[m]
VE-CHEMPFA-02/03
VE-CHEMPFA-02/04
VE-CHEMPFA-03/06
VE-CHEMPFA-04/06
VE-CHEMPFA-06/08
VE-CHEMPFA-08/10
VE-CHEMPFA-09/12
VE-CHEMPFA-10/12
2
2
3
4
6
8
9
10
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,2
0,5
1
1,5
1
1
1
1,5
1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,2
50
50
50
50
50
50
50
50
CHEMFLUOR TH
Internal layer: Black, conductive PTFE
Reinforcement: AISI 304 stainless steel braid
Characteristics: Flexible, PTFE hose designed for high pressure hydraulic, pneumatic and gas installations.
The internal layer, made of conductive PTFE, prevents the build-up of electrostatic charges.
Available as complete hose assemblies with fittings according to customer specification.
code
I.D.
[mm]
O.D.
[mm]
VE-1704TH000
VE-1706TH000
VE-1708TH000
VE-1710TH000
VE-1712TH000
VE-1716TH000
5,6
7,8
10,2
12,6
15,7
22
9,5
12
15,2
18
24,6
31,8
working press. bursting press.

20C
20C/200C
[bar]
[bar]
345
1100/820
345
1100/820
345
1100/820
345
1100/820
345
1100/820
345
1100/820
bending
radius
[mm]
38
64
73
83
102
127
maximum
length
[m]
12
10,5
10,5
10,5
10,5
10,5
183
SMOOTHBORE
Material:
Smooth PTFE
Reinforcement: Single or double AISI 304
stainless steel braid
Characteristics: The internal layer made of seamless extruded, premium grade of PTFE that ensures minimum
porosity, maximum flexibility and high resistance to vibration. The braid made of heat treated,
AISI 304 stainless steel wire (tensile strength: 1700 MPa). There are several SMOOTHBORE
versions available: standard or heavy wall, with a single or double braid (see tables below). Heavy
wall is recommended for heavy-duty applications, gases (up to 150 bar) and applications with
cyclic, rapid temperature changes. Double braid version is designed for high working pressure
and applications where kink resistance is required as the hose undergoes constant bending.
For temperatures above +130C reduce the maximum working pressure given in the
tables by 0,75% for each 1C of temperature rise above +130C.
Example: at +170C temperature, maximum working pressure for AF-SWSB-08 hose is:

260 bar - (170C - 130C) x 0,75 = 260 bar - 30% = 182 bar.
Safety factor (working pressure/ bursting pressure) is 1:3.
Due to the unique properties of PTFE (wide temperature range, excellent chemical resistance,
non-stick surface), widely used to transfer chemicals, foodstuffs, fuels, oils, paints, solvents,
adhesives, detergents, inks, steam, etc.
Usage:
SWSB (standard wall, single braid)

I.D.
code *
AF-SWSB-06
AF-SWSB-08
AF-SWSB-10
AF-SWSB-13
AF-SWSB-16
AF-SWSB-19
AF-SWSB-25
nominal
[inch]
1/4
5/16
3/8
1/2
5/8
3/4
1
minimum
[mm]
6
7,5
9,1
11,9
15
18
24
O.D.
maximum
[mm]
6,5
8
9,6
12,8
16
19,2
25,4
minimum
[mm]
8,3
9,8
11,5
14,5
17,8
21
27,6
maximum
[mm]
8,7
10,5
12
15,4
18,9
22,3
28,7
bending
radius
[mm]
working
pressure
[bar]
weight
[kg/m]
60
70
80
110
150
200
300
280
260
220
155
120
100
80
0,09
0,11
0,12
0,21
0,26
0,32
0,43
bending
radius
[mm]
working
pressure
[bar]
weight
[kg/m]
20
29
30
40
55
85
110
145
260
350
320
250
240
200
150
120
100
80
0,07
0,09
0,11
0,14
0,15
0,24
0,29
0,34
0,47
* code example of an antistatic version: AF-SWSB-06AS
HWSB (heavy wall, single braid)

I.D.
code *
AF-HWSB-03
AF-HWSB-05
AF-HWSB-06
AF-HWSB-08
AF-HWSB-10
AF-HWSB-13
AF-HWSB-16
AF-HWSB-19
AF-HWSB-25
nominal
[inch]
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
minimum
[mm]
3
4,5
6
7,5
9,1
11,9
15
18
24
* code example of an antistatic version: AF-HWSB-06AS
184
O.D.
maximum
[mm]
3,2
4,8
6,5
8
9,6
12,8
16
19,2
25,4
minimum
[mm]
6
7,5
9
10,5
12,2
15,1
18,5
21,4
28,1
maximum
[mm]
6,2
7,8
9,5
11,3
12,8
16,1
19,7
22,7
29,5

SWDB (standard wall, double braid)
I.D.
code *
AF-SWDB-03
AF-SWDB-05
AF-SWDB-06
AF-SWDB-08
AF-SWDB-10
AF-SWDB-13
AF-SWDB-16
AF-SWDB-19
AF-SWDB-25
nominal
[inch]
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
minimum
[mm]
3
4,6
6
7,5
9,1
11,9
15
18
24
O.D.
maximum
[mm]
3,2
4,75
6,5
8
9,6
12,8
16
19,2
25,4
minimum
[mm]
6,8
8,6
9,9
11,3
13,2
16
19,5
22,6
29
maximum
[mm]
3,2
4,8
6,5
8
9,6
12,8
16
19,2
25,4
32
38
50,8
minimum
[mm]
7
8,8
10,6
12,1
13,9
16,5
20,3
23,3
30,2
36,3
42,8
55,4
maximum
[mm]
6,9
8,8
10,2
11,8
13,5
16,8
20,4
23,6
30,2
bending
radius
[mm]
working
pressure
[bar]
weight
[kg/m]
20
30
40
50
60
90
130
170
270
380
350
310
300
250
200
150
120
90
0,10
0,14
0,16
0,19
0,21
0,34
0,42
0,50
0,70
bending
radius
[mm]
working
pressure
[bar]
weight
[kg/m]
18
25
26
35
50
75
100
135
250
400
800
1200
370
340
300
290
240
190
150
120
90
80
65
40
0,11
0,14
0,18
0,21
0,24
0,37
0,45
0,53
0,73
0,95
1,17
1,61
* code example of an antistatic version: AF-SWDB-06AS
HWDB (heavy wall, double braid)

I.D.
code *
AF-HWDB-03
AF-HWDB-05
AF-HWDB-06
AF-HWDB-08
AF-HWDB-10
AF-HWDB-13
AF-HWDB-16
AF-HWDB-19
AF-HWDB-25
AF-HWDB-32
AF-HWDB-38
AF-HWDB-51
nominal
[inch]
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
minimum
[mm]
3
4,5
6
7,5
9,1
11,9
15
18
24
30,4
36,2
48,8
O.D.
maximum
[mm]
7,1
9
10,9
12,6
14,3
17,3
21,2
24,3
31,2
37,5
44,7
57,4
* code example of an antistatic version: AF-HWDB-06AS
SMOOTHBORE hose versions

AS - antistatic
Special additives reduce inherent, high resistance of
PTFE meeting the requirements of ISO 8031 Annex A.
The electrical resistance between an end fitting and an
internal hose layer should not exceed108 .
One of the end fittings must be grounded.
HPG - high pressure gases

Hose designed for gases with the pressure above 140
bar. Hose wall is made of specially processed PTFE.
See INDUSTRIAL HOSES - technical gas
Other braid materials

SMOOTHBORE hoses can be supplied with braids
(standard or additional) made of AISI 316 stainless steel,
Monel, Kevlar, Nomex, polyester or fiberglass.
185

SMOOTHBORE hose versions
Additional hose covers
For braid protection or for the ease of cleaning, hoses
can be supplied with additional external covers made of
Hytrel, PVC, polyolefin, polyamide or various kinds of
rubber. The covers can be labelled with a brand name,
working pressure, etc.
EHT
Designed for applications where fixed, elevated
temperature must be maintained to ensure continuous,
liquid medium flow. The maximum, fixed working
temperature: +200C. For details of a particular hose
application, please contact Sale or Technical Department
of TUBES INTERNATIONAL.
SMOOTHBORE hose fittings

Standard SMOOTHBORE hose fittings: BSP (straight)
female thread (cone 60) or BSPT male thread, made
of zinc-plated steel or AISI 316. Other fittings such as
metric, JIC, NPT, flanges, pipe ends, DIN 11851, SMS,
TRICLOVER, and many more can be used as well.
TUBES INTERNATIONAL produces a hose assembly
according to customer specifications (length, diameter,
type of fittings) on request.
AX 1603
Material:
PTFE (teflon)
External layer: Steel wire / textile braid
Characteristics:
186
Lightweight, flexible hose designed for steam. Used in ironing machines, rinsers, coffee
machines, etc.
code
I.D.
[inch]
O.D.
[inch]
AX-1603
3/16
5/16
wall
thickness
[mm]
0,76
bending
radius
[mm]
63,50
working
pressure
[bar]
287
bursting
pressure
[bar]
862
HYPERLINE SB (HYDRAFLON)
Material:
Smooth PTFE
Reinforcement: Single or double AISI 304
stainless steel braid
Characteristics: The internal layer made of seamless extruded, premium grade PTFE that ensures minimum
porosity, maximum flexibility and high resistance to vibration. The braid made of heat treated
AISI 304 stainless steel wire (tensile strength: 1700 MPa). HYPERLINE hose is a version of
SMOOTHBORE hose, however its wall is medium thick and internal diameter suitable for
standard hydraulic fittings. Supplied with a single braid as a standard (double braid on special
request).
tables by 0,75% for each 1C of temperature rise above +130C.
Example: at +170C temperature, maximum working pressure for AF-HDSB-05 hose is:

320 bar - (170C - 130C) x 0,75 = 320 bar - 30% = 224 bar.
Usage:
HYPERLINE SB (medium wall, single braid)

code *
AF-HDSB-05
AF-HDSB-06
AF-HDSB-08
AF-HDSB-10
AF-HDSB-13
AF-HDSB-16
AF-HDSB-19
AF-HDSB-25
I.D.
[inch]
[mm]
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
5
6,7
8,5
10
13,6
16,6
19,8
26,4
O.D.
[mm]
bending
radius
[mm]
working
pressure
[bar]
weight
[kg/m]
7,65
9,3
11,1
12,75
16,35
19,5
22,5
30,1
45
60
70
80
130
163
180
230
320
260
220
190
150
130
110
80
0,08
0,11
0,14
0,17
0,21
0,28
0,33
0,52
* code example of an antistatic version: AF-HDSB-06AS

Standard fittings for HYPERLINE SB: Z type fittings (see: HIGH PRESSURE).
TUBES INTERNATIONAL produces hose assemblies according to customer specification (length, diameter, fitting
type) on request.
187
HYPERLINE FX
Material:
Smooth inside, corrugated outside PTFE
Reinforcement: Single AISI 304 braid (SS version)
or Kevlar braid (KB version)
Working temp.: From -70C to +260C - KB version up to
+180C (working pressure depends on
temperature)
Characteristics: HYPERLINE FX is made of PTFE which is smooth on the inside but corrugated one on the
outside. The construction combines properties of smooth hoses (ease of cleaning, uninterrupted
flow) and high flexibility that is specific to corrugated hoses. HYPERLINE FX SS is resistant to
full vacuum up to +130C.
For temperatures above +160C for FXSS and +130C for FXKB reduce the maximum
working pressure given in the tables by 1% for each 1C of temperature rise. Example:
at +170C temperature, maximum working pressure for AF-FXSS-10 hose is:

80 bar - (170C - 160C) x 1 = 80 bar - 10% = 72 bar.
Usage:
HYPERLINE FX is recommended for all industrial applications demanding high flow rates,
resistance to chemicals, temperature and permeation.
Widely used in automotive industry (fuel installations, oil lines), refrigeration, steam and gas lines.
Not suitable when PTFE lined fittings are required (BIOFLEX hose is then recommended).
HYPERLINE FX
pic. 1
A difference in construction
between a standard PTFE
corrugated hose (pic.1) and
HYPERLINE FX (pic.2).
pic. 2
On special request, HYPERLINE is available with a braid made of different materials, e.g. polypropylene.
HYPERLINE can be also supplied in 304 steel braid and additional cover made of EPDM rubber, silicone rubber,
PVC, nylon or other material.
code
(SS version)
code
(KB version)
I.D.
[mm]
O.D.
(SS version)
[mm]
O.D.
(KB version)
[mm]
AF-FXSS-06
AF-FXSS-08
AF-FXSS-10
AF-FXSS-13
AF-FXSS-16
AF-FXSS-19
AF-FXSS-25
AF-FXKB-06
AF-FXKB-08
AF-FXKB-10
AF-FXKB-13
AF-FXKB-16
AF-FXKB-19
AF-FXKB-25
6,8
7,9
10
13,6
16,7
19,8
26,4
9,6
10,6
13,5
17,5
21,4
24,2
31,7
9,6
10,6
13,5
17,5
21,4
24,2
31,7
bending
radius
SS/KB
[mm]
19/38
19/38
25/50
38/76
50/100
63/126
75/150
working
pressure
SS/KB
[bar]
88/62
84/59
80/56
60/42
50/35
42/29
40/28
note: for an antistatic version add AS at the end of the code

Z type fittings (see chapter HIGH PRESSURE) are used as a standard for HYDRALINE FX hose.
TUBES INTERNATIONAL supplies hose assemblies according to customer specification (length, diameter, fitting
type) on request.
188
HYPERLINE V (VISIFLON)
Material:
Helically corrugated PTFE
Reinforcement: AISI 304 braid (SS version)
Polypropylene braid (PB version)
No braid (TO version)
Working temp.: From -70C to +230C (SS version)
From -30C to +100C (PB version)
From -70C to +100C (TO version)
Characteristics: The internal layer is made of corrugated, premium grade PTFE which ensures excellent flexibility
and resistance to vibrations. A braid in SS version is made of AISI 304 annealed stainless
steel wire. PB version with a braid made of orange polypropylene fiber is lightweight and highly
resistant to chemicals. The maximum working pressure is 50% of the maximum working pressure
of SS version. TO version has no braid, is very lightweight and enables visual control of the
medium flow. The maximum working pressure is 2 bar. All versions are available as antistatic
(AS), resistance R<108 according to ISO 8031 Annex A. HYPERLINE V SS is resistant to
full vacuum up to +130C temperature (TO and PB up to +80C).
tables by 1% for each 1C of temperature rise. For PB version by 5% for each 1C above
+80C. Example: at +170C temperature, maximum working pressure for AF-VFSS-10 is:

60 bar - (170C - 130C) x 1 = 60 bar - 40% = 36 bar
Usage:
HYPERLINE V (AISI 304 steel braid)

code *
DN
[inch]
DN
[mm]
O.D.
[mm]
AF-VFSS-10
AF-VFSS-13
AF-VFSS-16
AF-VFSS-19
AF-VFSS-25
AF-VFSS-32
AF-VFSS-38
AF-VFSS-50
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
6,3
9,5
12,7
16
22,2
28,2
35
47
11,95
15,25
21,2
22,7
30,6
36
47
61
working
pressure
[bar]
60
47
40
32
26
25
20
15
bending
radius
[mm]
19
25
38
50
63
75
115
130
weight
[kg/m]
0,13
0,20
0,25
0,34
0,47
0,63
0,90
1,25
maximum
length
[m]
40
40
30
30
25
20
10
10
* code example of an antistatic version: AF-VFSS-10AS, code example of PB version: AF-VFPB-10

Standard HYPERLINE V hose fittings: BSP female fittings with cone 60 and BSPT male fittings , made of zincplated steel, AISI 316 steel or polypropylene. Other fittings can also be used e.g. metric, JIC, NPT, flange, pipe,
DIN 11851, SMS, TRICLOVER in straight, 45 or 90 option.
type) on request.
189
PHARMALINE
Material:
Reinforcement: AISI 304 stainless steel braid
(from 3/4 additional steel helix)
External layer: White silicone
Characteristics: PHARMALINE hose is made of smooth inside and corrugated outside PTFE. The construction
that is specific to corrugated hoses. It is a lighter version of BIOFLEX hose, designed for
traditional fitting-hose connection (crimping by a ferrule) as well as for RELINK reusable fittings.
Hoses in all diameters are resistant to full vacuum up to 140C.
A standard PHARMALINE hose in GP version has the internal layer made of PTFE in accordance
with FDA No. 21 CFR 177.1550 standard. An antistatic version (AS) is also available - compliant
with FDA No. 21 CFR 178.3297 standard. Both GP and GP AS hoses have been tested and
they both conform to the requirements of USP Class VI. The material of the external layerplatinum cured white silicone rubber is compliant with USP Class VI and with FDA CFR-1772600 standards. PHARMALINE hose can be optionally manufactured in accordance with ATEX
directive and adequately labelled according 94/9/EC Directive.
For temperatures above +130C reduce the maximum working pressure given in the tables
by 1% for each 1C of temperature rise above +130C. Example: at +170C temperature,
maximum working pressure for AF-PHGP-10 is:

100 bar - (170C - 130C) x 1 = 100 bar - 40% = 60 bar
Usage:
PHARMALINE hose is designed for transfer applications in high purity conditions both inside
and outside the hose. It is widely used in pharmaceutical, biotech, chemical and food industry.
Excellent for other industrial applications, particularly those where hot medium is transferred,
posing potential burn hazard due to accidental, direct contact with the hose. For example
hot oil or steam transfer. Unlike silicone hoses, PHARMALINE can undergo countless steam
sterilization without the risk of degradation of the hose and/or adverse changes in its material.
PHARMALINE - standard GP version

code
I.D.
[mm]
O.D.
[mm]
bending
radius
[mm]
working
pressure
[bar]
bursting
pressure
[bar]
weight
[kg/m]
maximum
length
[m]
AF-PHGP-06
AF-PHGP-10
AF-PHGP-13
AF-PHGP-16
AF-PHGP-19
AF-PHGP-25
AF-PHGP-32
AF-PHGP-38
AF-PHGP-50
6,8
9,5
12,7
16
19
25,4
32,5
38,8
51,5
11,6
15,5
19,5
24,4
27,3
34,8
45,3
51,7
65,7
19
25
38
50
63
100
130
170
210
130
100
70
65
60
50
44
38
28
520
400
280
260
240
200
180
158
123
0,17
0,22
0,37
0,52
0,65
0,88
1,30
1,70
2,36
18
18
18
18
18
18
18
17
13

TRICLAMP (TRICLOVER) fittings are used as a standard for PHARMALINE hose. Other fittings can also be used
e.g. BSPT male thread, NPT, flange, CAMLOCK, DIN11851, RJT, RJP, SMS. RELINK reusable fittings are also
available.
type) on request.
190
PHARMALEX
Material:
External layer: Transparent silicone
(working pressure depends on temperature)
Characteristics: PHARMALEX hose is made of smooth inside and corrugated outside PTFE. The construction
that is specific to corrugated hoses. Designed for traditional fitting-hose connection (crimping by
a ferrule) and for RELINK reusable fittings. Hoses in all diameters are resistant to full vacuum
up to 140C. A standard PHARMALEX hose in GP version has the internal layer made of PTFE
in accordance with FDA No. 21 CFR 177.1550 standard. An antistatic version (AS) is also
available - compliant with FDA No. 21 CFR 178.3297 standard. Both GP and GP AS hoses
have been tested and they both conform to the requirements of USP Class VI. The material of
the external layerplatinum cured transparent silicone rubber is compliant with USP Class VI
and with FDA CFR-177-2600 standards. PHARMALINE hose can be optionally manufactured
in accordance with ATEX directive and adequately labelled according 94/9/EC Directive.
For temperatures above +130C reduce the maximum working pressure given in the tables
by 1% for each 1C of temperature rise above +130C. Example: at +170C temperature,
maximum working pressure for AF-PXGP-10 is:

6 bar - (170C - 130C) x 1 = 6 bar - 40% = 3,6 bar
Usage:
PHARMALEX hose is designed for transfer applications in high purity conditions both inside
and outside the hose. It is widely used in pharmaceutical, biotech, chemical and food industry.
Excellent for other industrial applications, particularly those where hot medium is transferred,
posing potential burn hazard due to accidental, direct contact with the hose. For example
hot oil or steam transfer. Unlike silicone hoses, PHARMALEX can undergo countless steam
sterilization without the risk of degradation of the hose and/or adverse changes in its material.
PHARMALEX - standard GP version

code
I.D.
[mm]
O.D.
[mm]
bending
radius
[mm]
working
pressure
[bar]
bursting
pressure
[bar]
weight
[kg/m]
maximum
length
[m]
AF-PXGP-06
AF-PXGP-10
AF-PXGP-13
AF-PXGP-16
AF-PXGP-19
AF-PXGP-25
6,8
9,5
12,7
16
19
25,4
11,6
15,5
19,5
24,5
27,3
34,8
30
38
63
75
100
150
7,5
6
5,8
5
4,3
3,5
30
24
23
20
17
14
0,09
0,14
0,21
0,27
0,32
0,49
18
18
18
18
18
18

TRICLAMP (TRICLOVER) fittings are used as a standard for PHARMALEX hose. Other fittings can also be used
e.g. BSPT male thread, NPT, flange, CAMLOCK, DIN11851, RJT, SMS, RJP. RELINK reusable fittings are also
available.
type) on request.
191

Fittings and ferrules for SMOOTHBORE and HYPERLINE V
SMOOTHBORE and HYPERLINE V (VISIFLON) hoses are used with fittings and ferrules from AF-T series.
Diameters and tails of the fittings are adjusted to these hoses. The ferrules (tube shaped) are crimped using special
crimping dies. The end part of HYPERLINE V hose in which a fitting will be inserted, must be de-convoluted by
using a special tool and only then crimped.
AF-TBW110, AF-TBZ130 fittings are made of zinc-plated carbon steel or AISI 316 stainless steel; AF- T1,T2 and
T3 ferrules are made of zinc-plated carbon steel or AISI 304 (303) stainless steel.
Other fittings e.g. metric, 45, 90 or made of different materials (polypropylene or PTFE) are available on request.
AF-TBW110
AF-T1
AF-T2
AF-T3
AF-TBZ130
code - BSP female, 60 cone
AF-SWSB
AF-SWDB
code - BSPT male
AF-HWSB
AF-HWDB
AF-VFSS
AF-VFPB
(carbon steel)
(AISI 316)
(carbon steel)
(AISI 316)
thread size
[inch]
hose I.D.
[inch]
AF-TBW110-02-02
AF-TBW110-04-04
AF-TBW110-06-06
AF-TBW110-08-08
AF-TBW110-12-12
AF-TBW110-16-16
AF-TBW110-20-20
AF-TBW110-24-24
AF-TBW110-32-32
AF-TBW110-02-02SS
AF-TBW110-04-04SS
AF-TBW110-06-06SS
AF-TBW110-08-08SS
AF-TBW110-12-12SS
AF-TBW110-16-16SS
AF-TBW110-20-20SS
AF-TBW110-24-24SS
AF-TBW110-32-32SS
AF-TBZ130-02-02
AF-TBZ130-04-04
AF-TBZ130-06-06
AF-TBZ130-08-08
AF-TBZ130-12-12
AF-TBZ130-16-16
AF-TBZ130-20-20
AF-TBZ130-24-24
AF-TBZ130-32-32
AF-TBZ130-02-02SS
AF-TBZ130-04-04SS
AF-TBZ130-06-06SS
AF-TBZ130-08-08SS
AF-TBZ130-12-12SS
AF-TBZ130-16-16SS
AF-TBZ130-20-20SS
AF-TBZ130-24-24SS
AF-TBZ130-32-32SS
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
code
(carbon steel)
code
(AISI 304/303)
hose I.D.
[inch]
hose type
AF-T1-02
AF-T1-03
AF-T1-04
AF-T2-04
AF-T1-05
AF-T1-06
AF-T2-06
AF-T1-08
AF-T2-08
AF-T1-10
AF-T2-10
AF-T1-12
AF-T2-12
AF-T3-12
AF-T1-16
AF-T2-16
AF-T3-16
AF-T2-20
AF-T3-20
AF-T2-24
AF-T3-24
AF-T2-32
AF-T3-32
AF-T1-02SS
AF-T1-03SS
AF-T1-04SS
AF-T2-04SS
AF-T1-05SS
AF-T1-06SS
AF-T2-06SS
AF-T1-08SS
AF-T2-08SS
AF-T1-10SS
AF-T2-10SS
AF-T1-12SS
AF-T2-12SS
AF-T3-12SS
AF-T1-16SS
AF-T2-16SS
AF-T3-16SS
AF-T2-20SS
AF-T3-20SS
AF-T2-24SS
AF-T3-24SS
AF-T2-32SS
AF-T3-32SS
1/8
3/16
1/4
1/4
5/16
3/8
3/8
1/2
1/2
5/8
5/8
3/4
3/4
3/4
1
1
1
1.1/4
1.1/4
1.1/2
1.1/2
2
2
HWSB
HWSB, (HWDB 1/8)
SWSB, HWSB
SWDB, (HWSB-5/16)
SWSB, (HWDB-3/16)
SWSB, HWSB, VFSS, (HWDB-1/4, SWDB-5/16)
SWDB, VFPB, (HWDB-5/16)
SWSB, HWSB, VFSS, (HWDB-3/8)
SWDB, HWDB, VFPB
SWSB, HWSB, VFSS
SWDB, HWDB, VFPB
SWSB, HWSB
SWDB, VFSS
HWDB, VFPB
SWSB
HWSB, SWDB, VFSS
HWDB, VFPB
HWDB, VFSS
VFPB
HWDB, VFSS
VFPB
HWDB, VFSS
VFPB
192

Fittings and ferrules for HYPERLINE SB, FX, V
HYPERLINE SB, HYPERLINE FX and HYPERLINE V hoses require standard hydraulic fittings TI-Z type (e.g. TIZBW110-08-08), see HIGH PRESSURE chapter, and ferrules from series AF-TH and AF-THU. The ferrules are
crimped with standard crimping dies. The corrugated part of HYPERLINE V hose in which a fitting will be inserted,
must be de-convoluted using a special tool and only then crimped.
AF-THU
hydraulic fitting
TI-Z
AF-FXSS
AF-FXKB
AF-HDSB
AF-VFSS
AF-TH
code
(carbon steel)
code
(carbon steel)
code
(AISI 304/303)
code
(AISI 304/303)
hose I.D.
[inch]
hose type
AF-THU-03
AF-THU-04
AF-THU-05
AF-THU-06
AF-THU-08
AF-THU-10
AF-THU-12
AF-THU-16
-
AF-TH-03
AF-TH-04
AF-TH-05
AF-TH-06
AF-TH-08
AF-TH-10
AF-TH-12
AF-TH-16
AF-TH-20
AF-TH-24
AF-TH-32
AF-THU-03SS
AF-THU-04SS
AF-THU-05SS
AF-THU-06SS
AF-THU-08SS
AF-THU-10SS
AF-THU-12SS
AF-THU-16SS
-
AF-TH-03SS
AF-TH-04SS
AF-TH-05SS
AF-TH-06SS
AF-TH-08SS
AF-TH-10SS
AF-TH-12SS
AF-TH-16SS
AF-TH-20SS
AF-TH-24SS
AF-TH-32SS
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
HDSB
HDSB, FXSS, FXKB
HDSB
HDSB, FXSS, FXKB, VFSS
HDSB, FXSS*, FXKB*, VFSS
VFSS
VFSS
VFSS
* - only AF-THU ferrules
Fittings for PHARMALINE and PHARMALEX

PHARMALINE and PHARMALEX hoses are used with fittings from AF-PHX series (e.g. AF-PHXTC - Triclover
fittings) and ferrules from AF-PHXT1 series. The tail of AF-PHX fittings is sanitary which means that the tail is
gently tapered at the very end of the fitting and internally polished up to Ra = 0,4. AF-PHX sanitary fittings are also
available with other types of connectors. PHARMALINE and PHARMALEX hoses can be also used with fittings
from AF-T series.
AF-PHXTC
AF-PHXT1
AF-PHGP
(AF-PXGP)
code
(AISI 316)
flange I.D.
[mm]
ferrule
(AISI 304/303)
hose I.D.
[inch]
25
34
34
50,5
50,5
50,5
64
AF-PHXT1-006
AF-PHXT1-010
AF-PHXT1-013
AF-PHXT1-016
AF-PHXT1-020
AF-PHXT1-025
AF-PHXT1-038
AF-PHXT1-050
1/4
3/8
1/2
5/8
3/4
1
1.1/2
2
AF-PHXTC-025-010
AF-PHXTC-034-013
AF-PHXTC-034-016
AF-PHXTC-050-020
AF-PHXTC-050-025
AF-PHXTC-050-038
AF-PHXTC-050-050
193
CORROFLON
Material:
Helically corrugated PTFE
Reinforcement: AISI 304 stainless steel wire helix
AISI 304 braid (SS version)
Polypropylene braid (PB version)
From -30C to +100C (PB version)
(working pressure depends on
temperature)
Characteristics: CORROFLON hose is made of helically corrugated PTFE reinforced with AISI 304 stainless
steel wire helix and stainless steel braid (SS version). The construction ensures resistance to
vacuum and kinking. A thick wall reduces permeation to minimum. A gentle, shallow corrugation
gives an uninterrupted flow, increases cleanability and encourages self-cleaning. All versions
are supplied as complete hose assemblies with standard or PTFE lined (flared) fittings.
Usage:
helix
braid
sealing made
of flared PTFE
lining
PTFE layer
CORROFLON - SS version - AISI 304 stainless steel braid
194
DN
[inch]
DN
[mm]
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
6
15
20
25
32
40
50
65
80
100
150
flow
diameter
[mm]
11,2
15,7
21,5
27,5
32
43
54
64
98
130
O.D.
[mm]
17,5
23,1
31,7
38,4
44,6
59
73
86
117
170
working
pressure
[bar]
41
35
31
27
23
20
16
14
10
5
bending
radius
[mm]
38
51
70
82
100
140
178
230
300
600
weight
[kg/m]
0,33
0,45
0,70
0,82
1,50
2,10
2,58
3,29
5,05
6,70
maximum
length
[m]
28
30
40
30
25
18
13
10
5
4

CORROFLON - PB version - polypropylene braid
DN
[inch]
DN
[mm]
1/2
3/4
1
1 1/4
1 1/2
2
2 1/2
3
4
15
20
25
32
40
50
65
80
100
flow
diameter
[mm]
11,2
15,7
21,5
27,5
32
43
54
64
98
O.D.
[mm]
19,1
26
34
43,6
48,6
62
77
90
120
working
pressure
[bar]
31
26
23
20
17
15
12
10
8
bending
radius
[mm]
38
51
70
80
100
140
178
230
300
weight
[kg/m]
0,26
0,36
0,56
0,66
1,20
1,68
2,06
2,63
3,98
maximum
length
[m]
28
30
40
30
25
18
13
10
5
PB - polypropylene braid
A hose in polypropylene braid is more lightweight (around
20% compared to GPSS version) and more resistant to
abrasion.
Recommended for applications involving frequent
operation and relocation. Excellent for frequent
manual handling of the hose in particular. The working
temperature ranges from -30C to +100C.
max. working pressure (bar)
DN
Relation between working pressure and temperature

The graph shows the relation between the maximum
working pressure and temperature for nominal diameters
of CORROFLON GPSS hose. At temperatures lower than
0C and down to -70C, the maximum working pressures
applies as the nominal pressure of the hose.
For PB version, in the temperature range from -30C to
+80C as per graph. From +80C up to +100C reduce
the pressure by 50%. RC, FP, SI versions as per graph
(within the temperature range of the particular version).
temperature (C)
Vacuum resistance
Hoses in SS version are resistant to full vacuum up to +130C. Vacuum resistance must be reduced by 1% for
every 1C above + 130C. The resistance of other versions is limited by their maximum working temperature.
AS - antistatic internal layer

PTFE. The electrical resistance between an end fitting
and a wetted internal layer should not exceed 108 .
One of the end fittings must be grounded. The additives
in the material of the hose do not have any impact on
its sanitary properties. Compliant with FDA standards.
195

Complete CORROFLON hose assemblies
TUBES INTERNATIONAL produces CORROFLON hose assemblies with fittings in two versions: PTFE lined fittings
(PTFE layer is extended through the fitting and flared out as the sealing face) and standard fittings ( non-lined fittings).
PTFE lined fittings
The internal layer of PTFE hose is extended through the
fitting and flared out as the sealing face. This construction
prevents any contact of the transferred medium with the
material of the fitting. Advantages:
- for aggressive media - the separation of transferred
fluid from the fitting.
- for food and pharmaceutical substances - the lack of
crevices (A) - places in which material particles may
be entrapped. It allows to ensure clean and sterile
system.
Non-lined fittings
CORROFLON hose can be equipped with standard fittings
used for PTFE hoses with thread and seal types as for
hydraulic fittings. Then this PTFE hose assembly is similar
to HYPERLINE V hose assemblies but its operation life is
much longer, resistance to bending, mechanical impact
and vacuum is higher, permeability is reduced. Available
with TRICLOVER, non-flared fittings as well.
CORROFLON hose assembly length limitations

DN
[inch]
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
6
minimum length
[mm]
15
20
25
32
40
50
65
80
100
150
straight [mm]
50
75
100
150
200
200
250
250
350
500
bent 90 [mm]
100
100
150
200
300
440
600
750
1000
1500
maximum length
[m]
28
30
40
30
25
18
13
10
5
4
Values given in the table above do not include the length of the fittings (fitting + ferrule), apply to versions in
stainless steel or plastic braid, without rubber cover. The values should be increased by 33% for rubber covered
hoses. The length of a complete hose assembly is taken as the length from the sealing face of the fitting at one
end of the assembly to the same at the other end. Length tolerance: from 0% to 10% - for lengths above 1 meter
and 0% to 5% - for lengths up to 1 meter.
The maximum working pressure of a hose assembly is determined by the lower from two values: hose
working pressure and fitting working pressure.
196

Standard flared fittings for CORROFLON hoses
SMS
SMS HP
10 (static)
10 (pulsating)
DIN 11851 female
DIN 11851 male
fitting type
working pressure
[bar]
code
hose DN
1
25
1.1/4
32
1.1/2
40
2
50
2.1/2
65
3
80
AF-CFXSMS...N
AF-CFXSMS...W
thread
Rd 40x1/6
Rd 60x1/6
Rd 70x1/6
Rd 85x1/6
Rd 98x1/6
AF-CFXSMSHP...
thread
Rd 40x1/6
Rd 60x1/6
Rd 70x1/6
Rd 85x1/6
Rd 98x1/6
to 1.1/4 - 40,
above - 25
AF-CFXDIN...N
AF-CFXDIN...Z
AF-CFXDIN...W
thread
thread
Rd 52x1/6
Rd 52x1/6
Rd 58x1/6
Rd 58x1/6
Rd 65x1/6
Rd 65x1/6
Rd 78x1/6
Rd 78x1/6
Rd 95x1/6
Rd 95x1/6
Rd 110x1/4
Rd 110x1/4
CAMLOCK C
type
CAMLOCK A
type
swivel flange
DIN PN10/16
swivel flange
ASA 150
working pressure
[bar]
16 (DN 3-14)
16 (DN 3-14)
16 (DN 3-14)
16 (DN 3-14)
code
AF-CFXCAM...G
AF-CFXCAM...W
size
3/4
1
1.1/4
1.1/2
2
2.1/2
3
size
3/4
1
1.1/4
1.1/2
2
2.1/2
3
AF-CFXSFL...W
AF-CFXSFL...K
AF-CFXSFL...U
size
DN 15
DN 20
DN 25
DN 32
DN 40
DN 50
DN 65
DN 80
AF-CFXSFLA...W
AF-CFXSFLA...K
AF-CFXSFLA...U
size
DN 15
DN 20
DN 25
DN 32
DN 40
DN 50
DN 65
DN 80
fitting type
hose DN
1/2
15
3/4
20
1
25
1.1/4
32
1.1/2
40
2
50
2.1/2
65
3
80
Fittings are made of AISI 316 stainless steel as a standard (ferrules and flanges with PTFE lined option AISI 304).
Available on request: hose assemblies with flared TRICLOVER fittings, hose assemblies with fittings specified by the
customer, 4 and 6 hose assemblies. Please contact Technical Department of TUBES INTERNATIONAL for advice.
197

CORROFLON hose versions
EC - electrical continuity between fittings
Resistance between end fittings for hoses up to 5 meter:
- SS version <10
- PB and KYB versions <20
If electrical continuity is required, EC version should be
ordered.
TO - tube only (no braid)

Economical solution for low pressure applications without
a risk of mechanical damage. Made of translucent PTFE
that enables visual control of the flow. The working
pressure is reduced by 85%, weight by 35% compared
to SS version.
KYB - KYNAR braid

Braid made of Polyvinylidene Fluoride Monofilament
(KYNAR). Excellent chemical resistance. The working
temperature ranges from -40C to +120C (inside); up
to +100C (outside the hose).
The working pressure is reduced by 60%, weight by 30%
compared to GPSS version.
HB - HASTELLOY braid
HASTELLOY braid is more resistant to chemicals than
SS version. Suitable for applications conveying chlorine
or fluoride, and wherever the hose is exposed to intense
chemical corrosion.
The working pressure is reduced by 50% compared to
SS version.
RC - rubber cover
Designed for heavy duty application (e.g. reloading
applications). It is SS version with the layer of antistatic
EPDM rubber (neoprene/Hypalon also available)
vulcanized directly onto the steel braid. The working
temperature ranges from -40C up to +140C (inside);
up to +120C for EPDM (outside of the hose).
FP - fireproof
Fire resistant version of RC hose designed to resist
flame and maintain continuous flow in the event of
fire. Manufactured according to BS 5173. The working
temperature ranges from -40C up to +140C (inside);
up to +1200C (outside of the hose). An antistatic version
is also available.
198

CORROFLON hose versions
SP - special profile
As a result of construction with corrugations closer
together, SP version has better parameters than the
standard one. Kink and crush resistance is improved, the
working pressure is increased by 25% but the weight is
increased by 30%, actual bore diameter is reduced by 3
mm, bending radius is reduced by 25%. The maximum
continuous length is reduced by 50%.
An antistatic version is also available.
SI - additional silicone rubber cover

Used in applications where cleanliness in essential
(pharmaceutical, food industry). Remaining parameters
are the same as for SS version. Available in diameters
up to 3. The working temperature ranges from -40C to
+180C (inside); up to +160C (outside the hose).
SR - scuff rings
Rubber rings are placed every half meter along the hose
(diameters from 1 to 3) to protect against abrasion and
damage. Resistant to temperature up to +140C.
PC - protection coil
For applications where the hose requires protection
against abrasion but other covers are not acceptable
(e.g. due to high temperature).
Technical parameters are the same as for SS version.
RC 300 - rubber cover for fittings

A layer of EPDM rubber is vulcanized directly on the
ferrule to protect a handling person from direct contact
with a very hot or very cold hose assembly. Also protects
against excessive flexing of the hose at the fitting. Length
300 mm.
199
BIOFLEX
Smooth inside,
corrugated outside PTFE
Reinforcement: AISI 304 steel braid (SS version)
(working pressure depends on
temperature)
Material:
Characteristics:
Usage:
BIOFLEX hose is made of smooth inside and corrugated outside PTFE, reinforced with an
external AISI 304 stainless steel braid (SS version). The construction combines properties
of smooth hoses (ease of cleaning, uninterrupted flow) and high flexibility that is specific to
corrugated hoses. When compared to classic PTFE corrugated hoses, BIOFLEX features better
resistance to cyclic bending, smaller permeability and the maximum flow rates. Numerous
versions are available as complete hose assemblies with PTFE-lined fittings.
Due to the unique properties of PTFE and state-of-the-art construction, BIOFLEX hose
is frequently employed in installations transferring: chemicals, food and pharmaceutical
substances, fuels, oils, solvents, detergents, adhesives, paints, inks, steam, etc.
BIOFLEX - standard version GPSS

DN
[inch]
DN
[mm]
3/8
1/2
5/8
3/4
7/8
1
1.1/4
1.3/8
1.1/2
1.7/8
2
10
15
16
20
22
25
32
35
40
48
50
flow
diameter
[mm]
9,5
12,7
16
19
22
25,4
32
34,9
38
47,6
50,8
O.D.
[mm]
12,8
16,6
20,6
24,5
28,2
32,3
39,5
43,1
47
57,1
61
working
pressure*
[bar]
80
70
65
60
55
50
45
40
40
35
30
bending
radius
[mm]
19
38
45
50
60
70
100
120
140
190
200
weight
[kg/m]
0,14
0,29
0,35
0,40
0,52
0,63
0,85
1,00
1,10
1,38
1,90
maximum
length
[m]
18
18
18
18
18
18
18
16
17
13
10
* maximum working pressure depends on the temperature and the maximum working pressure of fittings assembled
on a hose (contact the Technical Department of TUBES INTERNATIONAL).
BIOFLEX hose versions

PTFE. Compliant with ISO 8031 Annex A. The electrical
resistance between an end fitting and a wetted internal
layer should not exceed 108 . One of the end fittings
must be grounded. Compliant with FDA standards.
EC - electrical continuity between end fittings

Resistance between end fittings:
- SS version <10
- PB version <20
If electrical continuity is required, EC version should be
ordered.
200

BIOFLEX hose versions
TO - tube only (no braid)

A lightweight hose without braid ( available in GP and AS
versions) used at low pressure.
A hose in polypropylene braid is more lightweight
and more resistant to abrasion. Recommended for
applications involving frequent handling and relocation.
The working pressure is reduced by 50% compared to
GPSS version. The working temperature ranges from
-30C to +100C.
KYB - KYNAR braid
Braid made of Polyvinylidene Fluoride Monofilament
(KYNAR). Excellent chemical and temperature resistance
(from -40C up to +120C).
The working pressure: 10 bar for diameters up to 1,
above - 6 bar, the weight reduced by 30%.
Note! PB and KYB version hoses feature grounding wires
under the braid.
RC - rubber cover (FP - fireproof)
Designed for heavy duty applications (e.g. reloading
applications). It is GPSS version with the layer of blue
EPDM rubber vulcanized directly onto the stainless steel
braid. Available with black, antistatic EPDM rubber.
The working temperature ranges from -40C to +140C.
HB - HASTELLOY braid (C 276)

Used instead of SS braid when the hose is exposed to
intense chemical corrosion (e.g. chlorine fumes). The
working pressure is reduced by 50% compared to SS
version. Other working parameters as for GPSS version.
SR - scuff rings
SI - additional silicone rubber cover
Description as for CORROFLON.
KR- kink resistant
An SS reinforcement wire is helically wound along the
hose with SS braid and then covered with a layer of
rubber (RC, FP, SI). Available for diameters above 5/8.
201

BIOFLEX hose fittings
SMS
A fitting with a female thread compliant with Swedish SMS
specification. PTFE liner ensures clean and uninterrupted
flow. All parts made of acid-resistant steel.
RJT
A fitting with a female thread compliant with British BS4825
standard. PTFE liner ensures clean and uninterrupted
DIN 11851
A fitting with a female thread according to German
DIN 11851 standard. PTFE liner ensures clean and
uninterrupted flow. All parts made of acid-resistant steel.
DIN 11851
A fitting with a male thread according to German
DIN 11851 standard. PTFE liner ensures clean and
uninterrupted flow. All parts made of acid-resistant steel.
CAMLOCK
CAMLOCK coupling compliant with MIL-C-27487
standard. PTFE liner ensures clean and uninterrupted
TRICLOVER
A fitting compliant with BS 4825, ISO 2852 or DIN 32676.
PTFE liner ensures clean and uninterrupted flow. All parts
made of acid-resistant steel.
202

BIOFLEX hose fittings
Standard flanges
Swivel flanges compliant with ASA 150 and DIN PN16.
PTFE liner ensures clean and uninterrupted flow.
Flange material: AISI 304 stainless steel.
Spigot material: AISI 316L stainless steel.
ASA 150 flanges (ANSI B 16.5 class 150)

flange
size
O.D.
[mm]
number
of
bolts
bore
diameter
[mm]
raised face
diameter
[mm]
DIN PN16 flanges (BS 4504)

flange
size
O.D.
[mm]
number
of
bolts
bore
diameter
[mm]
raised face
diameter
[mm]
[inch]
[mm]
[inch]
[mm]
1/2
15
89
16
32
1/2
15
95
14
32
3/4
20
98
16
43
3/4
20
105
14
43
25
108
16
50
25
115
14
63
1.1/2
40
127
16
73
1.1/2
40
150
18
88
50
152
19
92
50
165
18
102
80
190
19
152
80
200
18
160
100
228
19
190
100
220
18
180
150
279
22
241
150
285
22
240
DIP PIPES - tube fittings

Rigid tube fittings, straight or 90 elbow, designed for
suction of fluids (or filling up) from tanks, containers,
drums, etc. Made of antistatic (AS) PTFE as a standard.
Available in AISI 316 stainless steel, virgin PTFE or
other materials. The working pressure ranges from full
vacuum to 3 bar.
Steam heated hoses

CORROFLON CH
BIOFLEX CH
Steam heated hoses are manufactured using
CORROFLON or BIOFLEX as base hoses. Designed for
applications where the temperature of the fluid entering
the hose assembly must be maintained or the solidified
medium requires melting. The heating agent - steam
passes through the small diameter, helically wound,
PTFE hose.
Description - as for CORROFLON and BIOFLEX (1 3)
hoses, but the bending radius is tripled and the weight
per meter is increased.
Each hose is custom designed and built. Working
conditions and requirements must be given by filling in
an CH Questionnaire.
203

Electrically trace heated hoses
ETH 250
Designed for applications where the medium passing
through the hose requires heating, melting or maintaining
at fixed, elevated temperature. Employed to convey oil,
grease, wax, resins, tar, paints, granulated products,
adhesives, food products etc. ETH250 hose assembly
comprises a smooth bore PTFE hose in a stainless steel
braid, in diameters ranging from DN4 to DN 50.
Basic information
supply voltage
base hose
length
fitting
fitting material
thermal insulation
external braid
end cap
temperature sensor
connecting cable
protection rating
max. temperature
work. temp. tolerance
230 V AC/DC (other voltages: 12 500 V).

PTFE hose in a stainless steel braid.
from 0,3 up to 50 m.
threaded, flange, tube.
chrome-plated steel as a standard; stainless steel, PTFE and PFA coating as an option.
silicone foam up to +250C temperature.
elastomeric foam up to +100C temperature.
polyamide, steel, polyurethane, silicone or fibreglass as an option.
rigid polyamide or soft elastomeric version.
J type (Fe-CuNi), K type (NiCr-Ni), PT100 sensor and other.
1,5 m.
IP 54 (EN 60529).
up to +250C (temperature correction: +100C x 0,9, +200C x 0,8, +250C x 0,6).
10C.
Each heated hose assembly is custom designed and built. Working conditions and requirements must be supplied
by filling in an ETH Questionnaire provided by TUBES INTERNATIONAL.
fitting
end cap
external braid
thermal insulation
temperature sensor
heating element
connecting cable
plug
204
steel braid
PTFE base hose

Electrically trace heated hoses
CORROFLON ETH
BIOFLEX ETH
Electrically heated hoses are manufactured using
CORROFLON or BIOFLEX as base hoses. Designed
for applications where the temperature of the fluid
entering the hose assembly must be maintained or the
solidified medium requires melting. Description - as for
CORROFLON and BIOFLEX hoses, but the weight per
meter is increased and the bending radius is tripled,
compared to the corresponding hose which is not heated.
Because of the layer of insulation, the external diameter is
larger. The maximum length is the same as for standard
CORROFLON or BIOFLEX hoses.
4
5
1 - foam insulation layer

2 - flexible cover for the heating element
3 - temperature sensor
4 - flexible cover for the temperature sensor
wires
5 - heating element helically wound along
hose
6 - external braid, or other protective cover
Description: The heating element comprises an electrical wire of particular resistance (or self-regulating) helically
wound along the hose. The hoses usually require a temperature sensor to be built in under the
insulation. The power leads and (if applicable) temperature sensor leads emerge from the hose
assembly at one end, through glands and conduits. The foam rubber is applied for thermal insulation
(silicone foam rubber for temperatures above +80C). The external cover - a polypropylene braid
or stainless steel wire braid with an additional cover made of rubber or waterproof PVC cover if
necessary.
Construction: Each ETH hose assembly is custom designed and built. Working conditions and requirements must
be supplied by filling in an ETH Questionnaire provided by TUBES INTERNATIONAL. Generally,
for Zone 1 of Hazardous Areas, the self-regulating type of heating element is employed, with or
without a temperature sensor and controller. Flameproof glands and conduits are also required.
The watts per meter of the heating element, the pitch of the helix on the hose and the thickness of
the thermal insulation are all calculated in accordance with a special formula in order to obtain the
temperature required for the process.
205

Hose for transfer chlorine
BIOFLEX HB
Smooth inside,
Reinforcement: Hastelloy C276 braid
Material:
Suction-delivery hose designed to transfer chlorine, bromine and other penetrating halogens containing such fluids
and gases as phosgene or hydrogen fluoride (not recommended for fluorine and chlorine trifluoride). Widely used
for loading and unloading of tanks and tank trucks.
Smooth internal layer ensures the maximum flow rate while reducing reloading time. Antistatic internal layer meets
the requirements for hoses designed for dry and liquid chlorine transfer as well as for liquid-gaseous compounds.
Each BIOFLEX HB is always delivered as a complete assembly with end fittings according to customer requirements.
It is mostly due to special tools and technology needed for such a production. For safety reasons each hose (above
3/4) is pressure tested with helium before assembling fittings and hydrostatically tested as a complete hose
assembly. NPT male thread fitting and DIN 477 female 1 fitting are standard for BIOFLEX HB hose. According to
customer requirements BIOFLEX HB can be assembled with swivel flanges made of stainless steel, PTFE lined
to prevent contact of the transferred medium with the material of the fitting in compliance with ASME B16,5 class
300; DIN or ISO standards. The fittings that may come into contact with the medium are made of Monel 400 or
Hastelloy C-276 (for application with wet chlorine).
206
code
DN
[inch]
I.D.
[mm]
AF-BFHB-10AS
AF-BFHB-13AS
AF-BFHB-16AS
AF-BFHB-20AS
AF-BFHB-25AS
AF-BFHB-32AS
AF-BFHB-38AS
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
9,5
12,7
16
19
25,4
32
38
max. working
pressure
[bar]
40
35
32,5
30
25
22,5
20
min. bursting
pressure
[bar]
250
200
190
150
100
90
80
bending
radius
[mm]
19
38
45
50
70
100
140
maximum
length
[m]
18
18
18
18
18
18
17
CORROLINE
Smooth inside,
Reinforcement: AISI 304 steel braid (SS version)
Steel wire helix (AISI 304)
External layer: Black, smooth, antistatic EPDM rubber
(only SS RC version)
From -40C to +140C (SS RC version)
Material:
Characteristics: CORROLINE hose is made of smooth inside, corrugated outside PTFE. It is reinforced with AISI
304 steel braid (SS version) and AISI 304 steel wire helically wound into the external corrugations.
In a standard version (SS RC), the layer of black, antistatic rubber is vulcanized directly onto
the steel braid. The construction combines properties of smooth hoses (ease of cleaning,
uninterrupted flow) and high flexibility that is specific to corrugated hoses. CORROLINE was
developed to substitute rubber hoses with liners made of FEP, PFA MFA, XLPE or UHMWPE.
When compared to these hoses, CORROLINE is more flexible, more resistant to kinking and its
service live is longer. CORROLINE is an economical version of BIOFLEX hose but still with its
excellent properties such as resistance to cyclic bending, small permeability and the maximum
flow rates. It is primarily designed for application with chemicals. All hose versions are always
supplied as complete hose assemblies with fittings, PTFE lined as well.
Usage:
Transfer of chemicals, fuels, oils, paints, solvents, adhesives, detergents, inks, steam, etc.
CORROLINE - SS version - AISI 304 stainless steel braid
DN
[inch]
DN
[mm]
1/2
3/4
1
1.1/4
1.1/2
2
13
20
25
32
40
50
flow
diameter
[mm]
13,5
19,8
26,1
32
38,1
51,5
O.D.
[mm]
17,4
24,1
31,7
38,9
46,7
60,9
working
pressure *
[bar]
48
43
41
38
34
28
bending
radius
[mm]
60
65
100
135
170
210
maximum
length
[m]
18
18
18
18
17
13
* - working pressure depends on temperature
CORROLINE hose versions

SS RC - rubber cover (standard for SS braid)
Designed for heavy duty application (e.g. reloading
applications). It is CLNSS version with the layer of black,
antistatic, EPDM rubber vulcanized directly onto the
stainless steel braid.
SS RC version meets the requirements of BS5173
standard for determination of resistance to fire (FIRE
RESISTANT rating).

PTFE. Compliant with EN ISO 8031:2009. The electrical
layer should range from 103 to 107 . One of the end
fittings must be grounded. Compliant with FDA standards.
207

CORROLINE hose versions
A hose in polypropylene braid is more lightweight
and more resistant to abrasion. Recommended for
applications involving frequent frequent handling and
relocations. The working pressure is reduced by 50%
compared to CLNSS version. There are two strands
of Monel wire under the braid as a standard. They are
meant to ensure electrical continuity - see: EC version.
DRC 300 - double rubber cover
Designed for applications where excessive flexing of the
hose directly at the ferrule occurs. An additional layer of
rubber (300 mm long) is vulcanized on the rubber cover
of a hose in SS RC version. DRC-300 version meets the
requirements of BS5173 standard for determination of
resistance to fire (FIRE PROOF rating).
A wire helix wound along the hose to provide additional,
external protection. For application onto the hoses in
braids made of stainless steel, polypropylene or in a
rubber cover.
EC - electrical continuity between end fittings

Resistance between end fittings for all versions of
CORROLINE hoses is <20 . It also applies to PB
version but only if the special procedures were followed
during assembly.
According to EN ISO 8031:2009 standard, these hoses
can be marked with the letter M. If electrical continuity
is required, EC version should be ordered.
CORROLINE hose fittings

The fittings described below can be either PTFE lined (flared) or standard (non-lined).
DIN 11851
A fitting with a female thread according to German DIN
11851 standard. A version with PTFE liner ensures clean
and uninterrupted flow. All parts made of acid-resistant
steel.
208

CORROLINE hose fittings
Flange fittings
Swivel flanges compliant with ASA 150 and DIN PN16. A
version with PTFE liner ensures clean and uninterrupted
flow.
ASA 150 (ANSI B 16.5 class 150) flanges
flange
size
O.D.
[mm]
number
of holes
bore
diameter
[mm]
flared
diameter *
[mm]
DIN PN16 (EN 1092-1) flanges

flange
size
O.D.
[mm]
number
of holes
bore
diameter
[mm]
flared
diameter *
[mm]
[inch]
[mm]
[inch]
[mm]
1/2
13
89
16
32
1/2
13
95
14
32
3/4
20
98
16
43
3/4
20
105
14
50
25
108
16
50
25
115
14
63
1.1/4
32
118
16
63
1.1/4
32
140
18
78
1.1/2
40
127
16
73
1.1/2
40
150
18
88
50
152
19
92
50
165
18
102
* - flared diameter is the diameter of a sealing face made of the flared PTFE liner. Due to technological limitations
the actual diameter of some sizes may be smaller than the raised face diameter specified by the standard.
DIP PIPES - tube fittings

Rigid tube fittings, straight or 90 elbow, designed for
suction (or filling) of fluids from tanks, containers, drums,
etc. Made of antistatic (AS) PTFE as a standard. Available
in AISI 316 stainless steel, virgin PTFE or other materials.
Working pressure ranges from full vacuum to 3 bar.
Standard length of the tube is 1 m.
Other types of fittings

CORROLINE hose can be used with a variety of other fittings either standard or made according to customer
specifications, e.g.:
- non-flared, straight or 90 elbow TRICLOVER fittings,
- imperial or metric fittings with standard sealing,
- tube fittings.
209
BIOFLON
Material:
Smooth PTFE tube
Reinforcement: AISI 304 steel braid,
Steel wire helix (AISI 304)
External layer: Blue EPDM rubber (RC version
or transparent silicone (SI version)
Working temp.: From -40C to +140C (RC version)
From -73C to +204C (SI version)
(working press. depends on temp.)
Characteristics:
Usage:
BIOFLON hose includes a smooth PTFE tube. It is reinforced with AISI 304 steel wire braid and
AISI 304 steel wire helix which is wound onto the braid and vulcanized into the rubber cover.
This construction allowed to satisfy market demand for smooth bore PTFE hoses in 2.1/2
and 3 diameter. When compared to its competitive counterparts, the construction of BIOFLON
is surely prevailing as there is no glue used which might contaminate the medium in case of
hose failure. Moreover, the use of virgin PTFE guarantees excellent chemical resistance (in
comparison to rubber hoses with FEP, PFA MFA, XLPE, UHMWPE liners).
The flexibility of BIOFLON hose is considerably limited. It is stiffer than rubber hoses - the
minimum bending radius is twice as large. Vacuum resistance depends on the temperature
and bending radius. If a hose undergoes constant bending and is frequently disassembled, it is
recommended to use CORROLINE or 2 BIOFLEX with larger end fittings, 2.1/2 or 3 nominal
diameter , or use 2.1/2 or 3 CORROFLON.
All BIOFLON versions are always supplied as complete hose assemblies with fittings, PTFE
lined (flared) fittings as well.
Transfer of chemicals, food and pharmaceutical substances, fuels, oils, paints, solvents,
adhesives, detergents, inks, steam, etc. - wherever excellent chemical resistance of PTFE and
smooth internal layer are of primary importance but flexibility is not that vital.
BIOFLON - standard version RC

DN
[inch]
DN
[mm]
2.1/2
3
65
80
flow
diameter
[mm]
60
73
O.D.
[mm]
78
96,5
working
pressure
[bar]
20
16
bending
radius
[mm]
800
1000
maximum
length
[m]
10
10
BIOFLON hose versions

RC SI - silicone cover
A hose designed to operate at higher temperatures than
hoses in EPDM rubber cover.

PTFE. Compliant with EN ISO 8031:2009. The electrical
layer should range from 103 to 107 . One of the end
fittings must be grounded. Compliant with FDA standards.
210

BIOFLON hose fittings
Flange fittings
Swivel flanges compliant with ASA 150 and DIN PN16. A
version with PTFE liner ensures clean and uninterrupted
flow.
ASA 150 flange (ANSI B 16.5, 150 class)
flange
size
O.D.
[mm]
number
of holes
bore
diameter
[mm]
flared
diameter *
[mm]
DIN PN16 flanges (EN 1092-1)

flange
size
O.D.
[mm]
number
of holes
bore
diameter
[mm]
flared
diameter *
[mm]
[inch]
[mm]
[inch]
[mm]
2 1/2
65
178
19
105
2 1/2
65
185
18
122
80
191
19
127
80
200
18
127
* - flared diameter is the diameter of a sealing face made of the flared PTFE liner. Due to technological limitations
the actual diameter of some sizes may be smaller than the raised face diameter specified by the standard.
Other types of fittings
BIOFLON can be used with a variety of other fittings either standard or made according to customer specifications,
e.g.:
- non-flared, straight or 90 elbow TRICLOVER fittings,
- imperial or metric fittings with standard sealing,
- tube fittings.
Some of the types of fittings listed above are available with PTFE liner (flared). Please contact Technical Department
of TUBES INTERNATIONAL for technical details and availability.
211

Flexible PTFE brake hose assemblies
Brake hoses are made of PTFE covered with stainless steel wire braid according to SAE J1401 specification. The
materials applied in the construction eliminate any changes of length or expansion thus ensuring constant size under
pressure and protect against any age-related loss of physical properties. A version with additional polyurethane
cover that guarantees increased resistance to abrasion is available on request.
There are two kinds of fittings designed for flexible brake hose assemblies: crimped and reusable fittings. The use
of reusable fittings allows on-site assembly (no crimping machine required).
OBHN
Internal layer: PTFE
Reinforcement: Single steel wire braid
Characteristics: Hose designed for car brake systems. Manufactured according to SAE J1401 standards.
Designed for pressure applications in hydraulic installations. Resistant to high temperature.
The internal and external layer resistant to aggressive chemical fluids, DOT3 and DOT4 brake
fluid. Suitable for ABS brake system - to reduce pulsation effect.
code
I.D.
[mm]
O.D.
[mm]
RK-OBHN-03
6,3
working
pressure
[bar]
210
bursting
pressure
[bar]
840
weight
[g/m]
45
bending
radius
[mm]
38
standard
length
[m]
10
OBHR
Internal layer:
Reinforcement:
External layer:
Working temp.:
PTFE
Single steel wire braid
Abrasion resistance polyurethane
From -40C to +130C
Characteristics: Hose designed for car brake systems. Manufactured according to SAE J1401 standards.
Designed for pressure applications in hydraulic installations. Resistant to high temperature.
The internal and external layer resistant to aggressive chemical fluids, DOT3 and DOT4 brake
fluid. Suitable for ABS brake system - to reduce pulsation effect. Translucent as a standard.
Available in yellow, red, blue or black colour on request.
212
code
I.D.
[mm]
O.D.
[mm]
RK-OBHR-03
7,6
working
pressure
[bar]
210
bursting
pressure
[bar]
840
weight
[g/m]
90
bending
radius
[mm]
38
standard
length
[m]
10

Fittings for brake hose OBHN / OBHR - crimped
description
Straight BANJO
code
material
D
[mm]
D1
[mm]
L
[mm]
L1
[mm]
L2
[mm]
RK-O-ADCPN
chromium
plated steel
10,2
16
26
52
RK-O-ADMPN
RK-O-EDCP
RK-O-EDMP
anodized
aluminium
RK-O-EDLP
10,2
16
36
62
10,2
16
26
52
10,2
16
36
62
10,2
16
40
66
RK-O-ADCP12N
chromium
plated steel
12.2
20
24
50
RK-O-A15PN
chromium
plated steel
10,2
16
25,5
RK-O-E15P
anodized
aluminium
10,2
16
25,5
RK-O-A45PN
chromium
plated steel
10,2
50
13
RK-O-E45P
anodized
aluminium
10,2
50
13
RK-O-A90PN
chromium
plated steel
10,2
41
22
RK-O-E90P
anodized
aluminium
10,2
41
22
RK-O-A45PLN
chromium
plated steel
10,2
16
50
12
RK-O-E45PL
anodized
aluminium
10,2
16
50
12
RK-O-A15PLN
chromium
plated steel
10,2
16
44
RK-O-E15PL
anodized
aluminium
10,2
16
44
BANJO side 15
BANJO side 45
BANJO side 90
BANJO lateral side 45
213

description
Male thread, female cone seal
thread
size
L
[mm]
L1
[mm]
L2
[mm]
CH
[mm]
M10x1,25
13
40
14
M10x1
13
40
14
RK-MACP-2N
3/8-24
13
40
14
RK-MALP-0N
M10x1,25
23
50
14
M10x1
23
50
14
RK-MALP-2N
3/8-24
23
50
14
RK-FACP-0N
M10x1,25
19
14
M10x1
19
14
RK-FACP-2N
3/8-24
19
14
RK-FALP-0N
M10x1,25
20
17
M10x1
20
17
RK-FALP-2N
3/8-24
20
17
RK-MFALP-0N
M16x1,5/
M10x1,25
12
23
17
M16x1,5/
M10x1
12
23
17
M16x1,5/
3/8-24
12
23
17
code
RK-MACP-0N
RK-MACP-1N
Male thread, male cone seal
RK-MALP-1N
Female thread
RK-FACP-1N
Female thread
RK-FALP-1N
Male / female thread
RK-MFALP-1N
RK-MFALP-2N
214
material
chromium
plated steel
chromium
plated steel
chromium
plated steel
chromium
plated steel
chromium
plated steel

description
Straight female (with a nut)
thread
size
L
[mm]
L1
[mm]
L2
[mm]
CH
[mm]
M10x1,25
20
14
M10x1
20
14
RK-FAGP-2N
3/8-24
20
14
RK-FAG45P-0N
M10x1,25
26
58
14
M10x1
26
58
14
RK-FAG45P-2N
3/8-24
26
58
14
RK-FAG90P-0N
M10x1,25
32
23
14
M10x1
32
23
14
RK-FAG90P-2N
3/8-24
32
23
14
RK-MAGP-0N
M10x1,25
26
16
10
M10x1
26
16
10
RK-MAGP-2N
3/8-24
26
16
10
RK-MAGP-12N
M12x1
26
16
10
RK-MAG45P-0N
M10x1,25
26
42
16
10
M10x1
26
42
16
10
RK-MAG45P-2N
3/8-24
26
42
16
10
RK-MAG90P-0N
M10x1,25
38
26
16
10
M10x1
38
26
16
10
3/8-24
38
26
16
10
code
RK-FAGP-0N
RK-FAGP-1N
45 female elbow (with a nut)
RK-FAG45P-1N
RK-FAG90P-1N
Straight male (with a nut)
material
chromium
plated steel
chromium
plated steel
chromium
plated steel
RK-MAGP-1N
chromium
plated steel
45 male elbow (with a nut)
RK-MAG45P-1N
RK-MAG90P-1N
RK-MAG90P-2N
chromium
plated steel
chromium
plated steel
215

description
Ferrule
code
material
D
[mm]
D1
[mm]
L
[mm]
L1
[mm]
L2
[mm]
RK-CAP-001N
(OBHN hose)
chromium
plated steel
11
18
RK-CAP-002N
(hose OBHR hose)
chromium
plated steel
11
18
44
26
44
26
Pipe fitting
RK-EP-6-DN
chromium
plated steel
RK-EP-8-DN
Pipe fitting (45 elbow)
RK-EP-6-45N
chromium
plated steel
50
27
RK-EP-6-90N
chromium
plated steel
33
40
RK-TSP-0705
carbon
steel
5,2
10
18
25
RK-TPA-02N
chromium
plated steel
4,5
48
27
18
Fitting to be weld
Tee
216

Fittings for brake hose OBHN - reusable
description
code
material
D
[mm]
D1
[mm]
L
[mm]
L1
[mm]
L2
[mm]
CH
[mm]
RK-O-ADCRN
chromium
plated steel
10,2
16
37
44
11
RK-O-100DC1
anodized
aluminium
10,2
16
37
44
12
RK-O-A15RN
chromium
plated steel
10,2
36
44
11
RK-O-10015C
anodized
aluminium
10,2
36
44
11
RK-O-A45RN
chromium
plated steel
10,2
44
14
11
RK-O-10045M
anodized
aluminium
10,2
44
14
11
10,2
20
34
11
10,2
43
53
11
10,2
20
34
12
10,2
43
53
12
Straight BANJO
BANJO side 15
BANJO side 45
BANJO side 90
RK-O-A90RN
RK-O-A90REN
RK-O-10090M
RK-O-10090E
chromium
plated steel
anodized
aluminium
RK-O-A45RLN
chromium
plated steel
10,2
16
14
44
11
RK-O-100LMO
anodized
aluminium
10,2
16
14
44
12
RK-O-A25RLN
chromium
plated steel
10,2
16
11
36
11
RK-O-10025LC
anodized
aluminium
10,2
16
11
36
12
217

description
Short BANJO
code
material
RK-O-ACR10N
RK-O-ACR11N
chromium
plated steel
RK-O-ACR12N
RK-O-100DCO
RK-O-110DCO
anodized
aluminium
RK-O-120DCO
D
[mm]
D1
[mm]
L
[mm]
L1
[mm]
L2
[mm]
CH
[mm]
10,2
20
28
38
11
11,2
20
28
38
11
12,2
20
28
38
11
10,2
20
28
38
12
11,2
20
28
38
12
12,2
20
28
38
12
Short twin BANJO
RK-O-100DCD
anodized
aluminium
10,2
20
58
12
RK-TAR-01N
chromium
plated steel
46
23
11
RK-RTT-001
anodized
aluminium
46
23
12
RK-ER-6-DN
chromium
plated steel
50
26
11
RK-ER-6-45N
chromium
plated steel
50
30
23
11
RK-ER-6-90N
chromium
plated steel
40
29
35
11
Tee
Pipe fitting
218

description
Male thread, female cone seal
thread
size
M10x1,25
11
32
14
11
M10x1
11
32
14
11
RK-MACR-2N
3/8-24
11
32
14
11
RK-MALR-0N
M10x1,25
23
45
14
11
M10x1
23
45
14
11
RK-MALR-2N
3/8-24
23
45
14
11
RK-MFALR-0N
M16x1,5
M10x1,25
12
37
17
11
M16x1,5
M10x1
12
37
17
11
M16x1,5
3/8-24
12
37
17
11
M10x1,25
32
13
11
M10x1
32
14
11
RK-FACR-2N
3/8-24
32
13
11
RK-FALR-0N
M10x1,25
37
17
11
M10x1
37
17
11
3/8-24
37
17
11
RK-MALR-1N
Male / female thread
material
RK-MACR-0N
RK-MACR-1N
Male thread, male cone seal
RK-MFALR-1N
chromium
plated steel
chromium
plated steel
chromium
plated steel
RK-MFALR-2N
Female thread
RK-FACR-0N
RK-FACR-1N
Female thread
L
L1
L2
L3 CH 1 CH 2
[mm] [mm] [mm] [mm] [mm] [mm]
thread
size
code
RK-FALR-1N
RK-FALR-2N
chromium
plated steel
chromium
plated steel
219

description
Straight female (with a nut)
code
RK-FAGR-0N
14
12
11
M10x1
40
14
12
11
RK-FAGR-2N
3/8-24
40
14
12
11
RK-FAG45R-0N
M10x1,25
22
55
14
12
11
M10x1
22
55
14
12
11
RK-FAG45R-2N
3/8-24
22
55
14
12
11
RK-FAG90R-0N
M10x1,25
37
43
14
12
11
M10x1
37
43
14
12
11
RK-FAG90R-2N
3/8-24
37
43
14
12
11
RK-MAGR-0N
M10x1,25
45
16
10
11
11
M10x1
45
16
10
11
11
RK-MAGR-2N
3/8-24
45
16
10
11
11
RK-MAG45R-0N
M10x1,25
22
50
16
10
11
11
M10x1
22
50
16
10
11
11
RK-MAG45R-2N
3/8-24
22
50
16
10
11
11
RK-MAG90R-0N
M10x1,25
40
37
16
10
11
11
M10x1
40
37
16
10
11
11
3/8-24
40
37
16
10
11
11
RK-FAG90R-1N
Straight male (with a nut)
RK-MAGR-1N
RK-MAG45R-1N
RK-MAG90R-1N
RK-MAG90R-2N
220
L
L1
L2 CH 1 CH 2 CH 3
40
RK-FAG45R-1N
thread
size
M10x1,25
RK-FAGR-1N
material
chromium
plated steel
chromium
plated steel
chromium
plated steel
chromium
plated steel
chromium
plated steel
chromium
plated steel

Fittings for brake hose OBHN - assembling parts
description
code
material
RK-BFSA-0N
BANJO bolt
RK-BFSA-1N
M10x1,25
chromium
plated steel
25
19
12
25
19
12
25
19
12
M10x1,25
25
19
12
M10x1
25
19
12
3/8-24
25
19
12
M10x1,25
35
29
12
M10x1
35
29
12
3/8-24
35
29
12
M10x1,25
35
29
12
M10x1
35
29
12
RK-BFDE-02
3/8-24
35
29
12
RK-BFSAS-0N
M10x1,25
35
19
12
12
M10x1
35
19
12
12
3/8-24
35
19
12
12
M10x1,25
35
19
12
12
M10x1
35
19
12
12
3/8-24
35
19
12
12
M10x1,25
46
29
12
12
M10x1
46
29
12
12
RK-BFSE-01
anodized
aluminium
RK-BFSE-02
RK-BFDA-0N
RK-BFDA-1N
chromium
plated steel
RK-BFDA-2N
RK-BFDE-00
RK-BFDE-01
RK-BFSAS-1N
anodized
aluminium
chromium
plated steel
RK-BFSAS-2N
RK-BFSS-00
RK-BFSS-01
anodized
aluminium
RK-BFSS-02
BANJO double bolt for bleed
M10x1
RK-BFSE-00
BANJO bolt for bleed
D1
L
L1
L2
L3
CH
3/8-24
RK-BFSA-2N
BANJO double bolt
thread
size
RK-BFDAS-0N
RK-BFDAS-1N
chromium
plated steel
RK-BFDAS-2N
3/8-24
46
29
12
12
RK-BFDS-00
M10x1,25
46
29
12
12
M10x1
46
29
12
12
3/8-24
46
29
12
12
RK-BFDS-01
anodized
aluminium
RK-BFDS-02
BANJO bolt
RK-BFDH-0
anodized
aluminium
7/16-24
18
33
23
10
12
RK-CTFA-001N
chromium
plated steel
3/8-32
14
11
RK-CTF-001
anodized
aluminium
3/8-32
14
12
M16x1,5
19
M10x1,25
15
M10x1
15
3/8-24
15
Harley D.
Socket
Locknut
RK-DB-1615N
RK-DB-100N
RK-DB-101N
RK-DB-102N
chromium
plated steel
221

Fittings for brake hose OBHN - assembling parts
description
D
D1
D2
S
L
L1
L2
L3
[mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
code
material
RK-BIC-001
brass
7,5
RK-BIC-000
rubber
7,5
10,2
13,5
10,2
15,5
10
40
6,5
15
21
10
15
21
10
15
16
14
Biconic for fitting with female thread
Bicone
Washer
RK-RA-0100
anodized
aluminium
RK-RA-0120
Fairlead
RK-PTG-10
Fairlead
rubber
RK-FTC-01
RK-FTC-02
rubber
RK-FTC-03
Cushioned tube clamps
RK-FZG-20
zinc plated
steel / rubber
6,5
18
15
20
30
22
RK-OG-0600
brass
7,5
Clamping ring
222
INDUSTRIAL HOSES - silicone

SILICONES - synthetic polymers that consist of multi-molecular silicone compounds. Due to their unique physical
and chemical properties they are widely used in industry as lubricants, paste, emulsion,
raw rubber, silicone raisins etc.
Silicone rubber can be extruded into hoses, bands, gaskets, panels or molded into various shapes, profiles etc.
It is widely used in pharmaceutical, biotechnological, food, machine-building, automotive, construction, power
industry, etc.
Silicone rubber characteristics:
- retains its properties at high and low temperature,
- dielectric strength: 1524 kV/mm,
- good resistance to oxidation,
- physiologically inert (tasteless, odourless),
- highly elastic and compressible,
- good tearing strength,
- excellent resistance to infrared radiation, UV and weather conditions,
- resistance to low pressure steam up to WP = 3 bar (high pressure steam causes partial degradation of silicone),
- lack of resistance to concentrated acids, alkalis, petrochemical products with aromatic content.
Physical and chemical properties of silicone rubber depend on the content of silicone compound. Using special
processing methods, fillers or crosslinking agents manufacturers obtain a variety of grades of silicone rubber that
can be adjusted to particular application requirements or customer needs.
RADIASIL / BLUE
Internal layer:
Reinforcement:
External layer:
Working temp.:
Blue silicone rubber

Textile cords
Blue silicone rubber
From -60C to +180C
Characteristics: Top grade silicone hose widely used in industry (e.g. cooling systems, hot air transfer). Excellent
resistance to mineral oil fumes. Hardness: 65 Shore (A).
code
I.D.
[mm]
O.D.
[mm]
MT-RADIASIL/B-010
MT-RADIASIL/B-013
MT-RADIASIL/B-016
MT-RADIASIL/B-019
MT-RADIASIL/B-025
MT-RADIASIL/B-032
MT-RADIASIL/B-038
MT-RADIASIL/B-040
MT-RADIASIL/B-050
MT-RADIASIL/B-063
MT-RADIASIL/B-075
MT-RADIASIL/B-100
10
13
16
19
25
32
38
40
50
63,5
75
100
18
21
24
27
33
40
46
48
58
73,5
85
110
working
pressure
[bar]
12
10
9
8
6
5
4
4
3
4
4
2,5
weight
[kg/m]
0,23
0,28
0,35
0,37
0,47
0,58
0,68
0,71
0,87
1,44
1,64
2,20
standard
length
[m]
20
20
20
20
20
20
20
20
20
20
20
20
223

Hoses and hose connectors for automotive industry
Material:
Silicone rubber
Reinforcement: Textile braids (polyester as a standard,
Nomex or fiber glass optionally)
Working temp.: From -50C to +170C (polyester)
From -50C to +250C (Nomex)
From -50C to +330C (fiber glass)
Silicone hoses and hose connectors designed for cooling or heating systems in cars (water, cooling liquids, air or
air with oil mist). Hardness (standard version) about 65 Shore (A), density about 1,26 g/cm3. External layer in blue
as a standard (red and black are also available). Hoses meet the requirements of SAE J20R1 (SAE J20R2 - with
steel wire helix). As the hoses with steel wire helix and internal diameter up to 38 mm are highly flexible, they can
be easily used instead of silicone elbows. Working pressure ranges from a few to about a dozen (depends on a
type number of reinforcement layers, diameter, safety factor). Fluorosilicone hoses are recommended for oil, fuel
or oil mist. For proper hose selection, please contact Sales Department of TUBES INTERNATIONAL.
Hose with polyester braid reinforcement,

L 1000 mm*
Hose with polyester braid and steel wire helix

reinforcement, L 1000 mm*
ML
code
I.D.
[mm]
wall
thickness
[mm]
VP-ML-006
VP-ML-008
VP-ML-010
VP-ML-013
VP-ML-016
VP-ML-019
VP-ML-022
VP-ML-025
VP-ML-028
VP-ML-032
VP-ML-035
VP-ML-038
VP-ML-041
VP-ML-044
VP-ML-051
VP-ML-054
VP-ML-057
VP-ML-060
VP-ML-063
VP-ML-070
VP-ML-076
VP-ML-080
VP-ML-083
VP-ML-089
VP-ML-095
VP-ML-102
VP-ML-127
VP-ML-152
6
8
10
13
16
19
22
25
28
32
35
38
41
44
51
54
57
60
63
70
76
80
83
89
95
102
127
152
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
6
6
6
224
CH
code
I.D.
[mm]
wall
thickness
[mm]
VP-CH-013
VP-CH-016
VP-CH-019
VP-CH-022
VP-CH-025
VP-CH-028
VP-CH-032
VP-CH-035
VP-CH-038
VP-CH-051
VP-CH-063
13
16
19
22
25
28
32
35
38
51
63
4
5
5
5
5
4
5
4
4
5
6
* - also available in lengths of 2000, 3000, 4000 mm
Assembling clamps: see chapter COUPLINGS, VALVES

& CLAMPS, section: clamps, safety clamps and ferrules.
Elbow with polyester braid reinforcement
Straight reducer with polyester braid reinforcement
E90, E45
code
(90 elbow)
code
(45 elbow)
I.D..
[mm]
wall
thickness
[mm]
leg
length
[mm]
VP-E90-008
VP-E90-010
VP-E90-013
VP-E90-016
VP-E90-019
VP-E90-022
VP-E90-025
VP-E90-028
VP-E90-032
VP-E90-035
VP-E90-038
VP-E90-044
VP-E90-051
VP-E90-054
VP-E90-057
VP-E90-060
VP-E90-063
VP-E90-070
VP-E90-076
VP-E90-080
VP-E90-083
VP-E90-089
VP-E90-102
VP-E45-008
VP-E45-010
VP-E45-013
VP-E45-016
VP-E45-019
VP-E45-022
VP-E45-025
VP-E45-028
VP-E45-032
VP-E45-035
VP-E45-038
VP-E45-044
VP-E45-051
VP-E45-054
VP-E45-057
VP-E45-060
VP-E45-063
VP-E45-070
VP-E45-076
VP-E45-080
VP-E45-083
VP-E45-089
VP-E45-102
8
10
13
16
19
22
25
28
32
35
38
44
51
54
57
60
63
70
76
80
83
89
102
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
6
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
125
125
Aluminium hose joiner
HJ
code
O.D.
[mm]
wall
thickness
[mm]
length
[mm]
VP-HJ-016-100
VP-HJ-019-100
VP-HJ-022-100
VP-HJ-025-100
VP-HJ-028-100
VP-HJ-032-100
VP-HJ-035-100
VP-HJ-038-100
VP-HJ-051-100
VP-HJ-057-100
VP-HJ-060-100
VP-HJ-063-100
VP-HJ-070-100
VP-HJ-076-100
VP-HJ-080-100
VP-HJ-089-100
VP-HJ-102-100
16
19
22
25
28
32
35
38
51
57
60
63
70
76
80
89
102
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
1,6
2
2
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
SR
code
I.D.
[mm]
wall
thickness
[mm]
length
[mm]
VP-SR-019-013
VP-SR-019-016
VP-SR-022-016
VP-SR-025-016
VP-SR-025-019
VP-SR-032-019
VP-SR-032-025
VP-SR-035-025
VP-SR-038-025
VP-SR-038-032
VP-SR-038-035
VP-SR-051-038
VP-SR-051-044
VP-SR-054-051
VP-SR-057-051
VP-SR-057-054
VP-SR-060-051
VP-SR-063-051
VP-SR-063-060
VP-SR-070-051
VP-SR-070-060
VP-SR-070-063
VP-SR-076-051
VP-SR-076-060
VP-SR-076-063
VP-SR-076-070
VP-SR-080-070
VP-SR-080-076
VP-SR-083-076
VP-SR-089-070
VP-SR-089-076
VP-SR-102-076
VP-SR-102-089
VP-SR-127-102
VP-SR-152-102
19 x 13
19 x 16
22 x 16
25 x 16
25 x 19
32 x 19
32 x 25
35 x 25
38 x 25
38 x 32
38 x 35
51 x 38
51 x 44
54 x 51
57 x 51
57 x 54
60 x 51
63 x 51
63 x 60
70 x 51
70 x 60
70 x 63
76 x 51
76 x 60
76 x 63
76 x 70
80 x 70
80 x 76
83 x 76
89 x 70
89 x 76
102 x 76
102 x 89
127 x 102
152 x 102
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
102
Hump hose with polyester braid reinforcement
HH
code
I.D.
[mm]
wall
thickness
[mm]
length
[mm]
VP-HH-051
VP-HH-060
VP-HH-063
VP-HH-070
VP-HH-076
VP-HH-080
VP-HH-089
VP-HH-102
51
60
63
70
76
80
89
102
5
5
5
5
5
5
5
5
100
100
100
100
100
100
100
100
225
VERSITEC
Working temp.: +200C (sterilization with steam,
ethylene oxide or radiation)
Brittle temp.:
-60C
Hardness:
60 Shore (A)
Density:
1,15 g/cm3
Characteristics:
226
Translucent, hydrophobic silicone hose resistant to UV radiation, oxygen and ozone. Widely
used in industry and household appliances. Compliant with FDA and BFR standards.
code
I.D.
[mm]
O.D.
[mm]
VE-761800
VE-761802
VE-761804
VE-761806
VE-761807
VE-761809
VE-761812
VE-761814
VE-761816
VE-761819
VE-761821
VE-761823
VE-761825
VE-761828
VE-761830
VE-761832
VE-761834
VE-761837
VE-761839
VE-761841
VE-761843
VE-761846
VE-761848
VE-761850
VE-761852
VE-761855
VE-761857
VE-761859
VE-761860
VE-761862
VE-761864
VE-761866
VE-761868
VE-761871
VE-761874
VE-761877
VE-761880
VE-761883
VE-761886
VE-761888
0,5
1
1,5
2
2
2
3
3
3
4
4
4
4
5
5
5
5
6
6
6
6
7
7
7
7
8
8
8
8
9
10
10
10
12
15
18
20
25
30
40
2,5
3
3
4
5,5
6
5
6
7
6
7
8
10
7
8
9
10
8
9
10
12
10
11
12
13
11
12
14
16
13
14
16
18
17
21
24
27
35
40
50
wall
thickness
[mm]
1
1
0,75
1
1,75
2
1
1,5
2
1
1,5
2
3
1
1,5
2
2,5
1
1,5
2
3
1,5
2
2,5
3
1,5
2
3
4
2
2
3
4
2,5
3
3
3,5
5
5
5
min. bending
radius
[mm]
1
2
4
7
3
3
8
7
5
15
10
8
6
25
16
14
11
36
26
19
12
32
23
18
15
35
28
18
14
39
46
30
26
47
70
87
102
111
204
270
working
pressure
[bar]
1,3
1,1
0,72
0,6
0,81
0,9
0,55
0,64
0,75
0,4
0,54
0,5
0,75
0,4
0,45
0,6
0,64
0,3
0,37
0,47
0,64
0,31
0,39
0,51
0,55
0,31
0,35
0,5
0,61
0,37
0,36
0,45
0,5
0,28
0,31
0,26
0,29
0,28
0,26
0,25
standard
length
[m]
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10

VERSILIC
Brittle temp.:
-50C
Hardness:
60 Shore (A)
Density:
1,16 g/cm3
Lenght:
25 m (from 18 mm - 10 m)
Characteristics:
Lightweight, flexible, biologically inert silicone hose. Glassy smooth internal layer helpsto
prevent impurities buildup. Remains flexible at -50C and retains its chemical, electrical
andmechanical properties at +200C. Meets FDA, BFR, USP (class VI), ISO 10993 (toxicity,
irritation, cytotoxicity, hemolysis) standards.
code
I.D.
[mm]
O.D.
[mm]
VE-760010
VE-760070
VE-760110
VE-760160
VE-760170
VE-760180
VE-760210
VE-760220
VE-760230
VE-760250
VE-760320
VE-760330
VE-760350
VE-760360
VE-760410
VE-760420
VE-760430
VE-760440
VE-760490
VE-760500
VE-760510
VE-760520
VE-760570
VE-760580
VE-760581
VE-760590
VE-760630
VE-760650
VE-760670
VE-760690
VE-760720
VE-760730
VE-760770
VE-760800
VE-760810
VE-760820
VE-760870
VE-760880
VE-761050
VE-761080
VE-761100
VE-761150
VE-761170
VE-761190
VE-761270
0,5
1
1,5
2
2
2
3
3
3
3
4
4
4
4
5
5
5
5
6
6
6
6
7
7
7
7
8
8
8
8
8,5
9
10
10
10
10
12
12
15
18
20
25
30
40
50
2,5
3
3
4
5,5
6
5
5,5
6
7
6
7
8
10
7
8
9
10
8
9
10
12
10
11
12
13
11
12
14
16
12
13
14
16
18
23
15,5
17
21
24
27
35
40
50
60
wall
thickness
[mm]
1
1
0,75
1
1,75
2
1
1,25
1,5
2
1
1,5
2
3
1
1,5
2
2,5
1
1,5
2
3
1,5
2
2,5
3
1,5
2
3
4
1,75
2
2
3
4
6,5
1,75
2,5
3
3
3,5
5
5
5
5
min. bending
radius
[mm]
1
2
3
4
3
2
7
6
6
4
14
9
10
5
23
16
12
12
29
22
20
12
25
24
19
14
31
28
18
17
32
35
48
30
29
15
66
48
66
74
99
58
133
80
418
working
pressure
[bar]
1,3
1,1
0,72
0,6
0,81
0,9
0,55
0,6
0,9
0,55
0,64
0,75
0,4
0,54
0,5
0,75
0,4
0,45
0,6
0,64
0,3
0,37
0,47
0,64
0,31
0,39
0,51
0,55
0,5
0,61
0,33
0,37
0,36
0,45
0,5
0,8
0,31
0,28
0,31
0,26
0,29
0,28
0,26
0,25
0,19
227
TECHNOSILPHARM H-PTV
Internal layer:
Reinforcement:
External layer:
Working temp.:
Hardness:
Transparent silicone rubber

Single polyester cord
Orange silicone rubber
From -60C to +180C
60 Shore (A)
Characteristics: Top grade delivery hose made of silicone. For application in biotechnology, pharmaceutical,
chemical and food industry. Manufactured using platinum-cure technology. Sterilization with
argon, cobalt, steam (max. +140C for 1,5 hour). Compliant with FDA 21 CFR 177.2600 and
BGA XV. Resistant to pressure values higher than a standard TECHNOSILPHARM hose.
Allowable operation at low vacuum. The minimum order length: 20 m.
code
I.D.
[mm]
O.D.
[mm]
VR-TSP/H-03
VR-TSP/H-04
VR-TSP/H-05
VR-TSP/H-06
VR-TSP/H-08
VR-TSP/H-10
VR-TSP/H-13
VR-TSP/H-16
VR-TSP/H-19
VR-TSP/H-25
VR-TSP/H-32
3
4
5
6,3
8
9,5
12,7
15,9
19
25,4
31,8
8
9
11
12
15
17
22
25
31
38
46

20C / 100C
20C
[bar]
[bar]
23,3 / 18,6
70
21,7 / 17,4
65
20,7 / 16,6
62
18,7 / 15
50
15,3 / 12,3
46
14 / 11,2
42
11,3 / 9
34
10 / 8
30
7,3 / 5,8
22
6 / 4,8
18
5/4
15
bending
radius
[mm]
30
35
40
44
55
70
83
95
135
160
200
standard
length
[m]
10
10
10
10
10
10
10
10
10
10
10
TECHNOSILPHARM
Internal layer:
Reinforcement:
External layer:
Working temp.:
Hardness:

Single polyester cord
From -90C to +180C
60 Shore(A)
chemical and food industry. Manufactured using platinum-cure technology. Sterilization with
argon, cobalt, steam (max. +140C for 1,5 hour). Compliant with FDA 21 CFR 177.2600 and
BGA XV. Optionally manufactured for higher working pressure. The minimum order length: 20 m.
228
code
I.D.
[mm]
O.D.
[mm]
VR-TSP-06
VR-TSP-08
VR-TSP-10
VR-TSP-12
VR-TSP-16
VR-TSP-19
VR-TSP-22
VR-TSP-25
VR-TSP-32
6,3
8
9,5
12,7
15,9
19
22,2
25,4
31,2
13,2
15
16,6
20,3
24,5
27,9
31,3
34,5
40,8

20C / 100C
20C
[bar]
[bar]
9,3 / 7,4
28
7,7 / 6,1
23
7,0 / 5,6
21
5,7 / 4,6
17
4,3 / 3,4
13
3,7 / 2,9
11
3,3 / 2,6
10
3,0 / 2,4
9
2,3 / 1,8
7
bending
radius
[mm]
38
45
55
70
85
95
110
135
160
standard
length
[m]
10
10
10
10
10
10
10
10
10
BIOSIL
Internal layer:
Reinforcement: CF version - polyester cord,
steel wire helix
CF/SS version - additional steel braid
External layer: Transparent silicone rubber
Characteristics: High-quality silicone hose widely used in biotechnology, pharmaceutical, chemical and food
industry. The construction of a hose and its integrated fittings provides an uninterrupted, clean
flow and allows self-cleaning. Available in AS version - antistatic and EC version - for electrical
continuity. As a standard TRICLOVER fittings are used, however other types of fittings such as
DIN 11851, SMS, CAMLOCK, flanges are available on request. Safety factor 4:1. Diameters
from 1/2 to 2 are resistant to full vacuum (for sizes above 2 - 50% of vacuum).
code
DN
[inch]
I.D.
[mm]
O.D.
[mm]
TP-BIOSIL/CF-013
TP-BIOSIL/CF-019
TP-BIOSIL/CF-025
TP-BIOSIL/CF-032
TP-BIOSIL/CF-038
TP-BIOSIL/CF-051
TP-BIOSIL/CF-063
TP-BIOSIL/CF-076
TP-BIOSIL/CF-102
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
12,7
19,1
25,4
31,8
38,1
50,8
63,5
76,2
101,6
25,5
31,2
38,3
44,5
50,9
63,7
76,4
91
116,3
working
pressure (CF)
[bar]
10
10
10
10
10
10
7
4
3
bending
radius
[mm]
45
65
80
120
150
180
220
250
360
maximum
length
[m]
4
4
4
4
4
4
4
4
4
VENAFLON
Internal layer:
Reinforcement:
External layer:
Working temp.:
Hardness:
Smooth PTFE
Single polyester braid, steel wire helix
From -60C to +180C
60 Shore (A)
Characteristics: Finest suction-delivery silicone hose. For application in biotechnology, pharmaceutical, chemical
and food industry. Manufactured using platinum-cure technology. Sterilization with argon, cobalt,
steam (max. +140C for 1,5 hour). Compliant with FDA 21 CFR 177.2600 and BGA XV. The
materials used in construction of this hose provide good resistance to high pressure. The internal
layer made of PTFE is highly resistant to chemicals. Standard length: 4 m.
code
I.D.
[mm]
O.D.
[mm]
VR-VENAFLON-13
VR-VENAFLON-19
VR-VENAFLON-25
VR-VENAFLON-32
VR-VENAFLON-38
VR-VENAFLON-51
13
19
25
32
38
51
25,4
34
40
47
53
66

20C / 100C
20C
[bar]
[bar]
26,0 / 20,8
78
21,7 / 17,4
65
17,7 / 14,2
53
15,3 / 12,2
46
14,0 / 11,2
42
10,7 / 8,6
32
bending
radius
[mm]
88
135
182
228
275
318
vacuum
[bar]
0,95
0,9
0,9
0,9
0,9
0,85
229
TECHNOPHARM 640
Internal layer:
Reinforcement:
External layer:
Working temp.:

Four polyester braids
From -60C to +180C
chemical and food industry. Sterilization with argon, cobalt, steam (max. +140C for 1,5
hour). Compliant with FDA 21 CFR 177.2600 and BGA XV. Manufactured using platinum-cure
technology. Meets the requirements of FDA/BfR Part XV and USP Class VI Platinum Cured
(standard for products used in pharmaceutical processing). Available in 6 m lengths on request.
230
code
I.D.
[mm]
O.D.
[mm]
VR-TP640-006
VR-TP640-008
VR-TP640-010
VR-TP640-013
VR-TP640-016
VR-TP640-018
VR-TP640-019
VR-TP640-020
VR-TP640-022
VR-TP640-025
VR-TP640-028
VR-TP640-030
VR-TP640-032
VR-TP640-034
VR-TP640-035
VR-TP640-038
VR-TP640-040
VR-TP640-042
VR-TP640-044
VR-TP640-045
VR-TP640-048
VR-TP640-050
VR-TP640-051
VR-TP640-053
VR-TP640-055
VR-TP640-057
VR-TP640-060
VR-TP640-062
VR-TP640-063
VR-TP640-065
VR-TP640-070
VR-TP640-075
VR-TP640-076
VR-TP640-080
VR-TP640-090
VR-TP640-100
VR-TP640-102
6
8
10
13
16
18
19
20
22
25
28
30
32
34
35
38
40
42
44
45
48
50
51
53
55
57
60
62
63
65
70
75
76
80
90
100
102
15
17
19
22
25
27
28
29
31
34
37
39
41
43
44
47
49
51
53
54
57
59
60
62
64
66
69
71
72
74
79
84
85
89
99
109
111
working press.
20C / 100C
[bar]
11,5 / 9,2
10,5 / 8,4
9,7 / 7,7
8,8 / 7,0
8,1 / 6,4
7,7 / 6,1
7,5 / 5,9
7,3 / 5,8
6,9 / 5,5
6,5 / 5,2
6,1 / 4,8
5,8 / 4,7
5,6 / 4,5
5,4 / 4,3
5,3 / 4,2
5,0 / 4,0
4,8 / 3,8
4,6 / 3,6
4,4 / 3,4
4,3 / 3,3
4,2 / 3,3
4,0 / 3,2
4,0 / 3,2
3,1 / 2,5
3,7 / 2,9
3,6 / 2,8
3,4 / 2,7
3,3 / 2,6
3,2 / 2,6
3,1 / 2,4
2,8 / 2,2
2,6 / 2,0
2,6 / 2,0
2,4 / 1,9
2,0 / 1,4
1,6 / 1,2
1,5 / 1,2
bursting press.
20C
[bar]
39
32
29
26
24
23
22
22
21
20
18
18
17
16
16
15
15
14
14
13
13
12
12
12
11
11
10
10
10
9
9
8
8
7
6
5
5
standard
length
[m]
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
TECHNOPHARM 650V
Internal layer: Transparent silicone rubber
Reinforcement: Four polyester braids,
302L steel wire helix
External layer: Transparent silicone rubber
Characteristics: Top grade suction-delivery hose made of silicone. Widely used in biotechnology, pharmaceutical,
chemical and food industry. Sterilization with argon, cobalt, steam (max. +140C for 1,5 hour).
Compliant with FDA 21 CFR 177.2600 and BGA XV. Manufactured using platinum-cure
technology. Meets the requirements of FDA/BfR Part XV and USP Class VI Platinum Cured
(standard for products used in pharmaceutical processing). Available in 6 m lengths on request.
code
I.D.
[mm]
O.D.
[mm]
VR-TP650V-006
VR-TP650V-008
VR-TP650V-010
VR-TP650V-013
VR-TP650V-016
VR-TP650V-018
VR-TP650V-019
VR-TP650V-020
VR-TP650V-022
VR-TP650V-025
VR-TP650V-028
VR-TP650V-030
VR-TP650V-032
VR-TP650V-034
VR-TP650V-035
VR-TP650V-038
VR-TP650V-040
VR-TP650V-042
VR-TP650V-044
VR-TP650V-045
VR-TP650V-048
VR-TP650V-050
VR-TP650V-051
VR-TP650V-053
VR-TP650V-055
VR-TP650V-057
VR-TP650V-060
VR-TP650V-062
VR-TP650V-063
VR-TP650V-065
VR-TP650V-070
VR-TP650V-075
VR-TP650V-076
VR-TP650V-080
VR-TP650V-090
VR-TP650V-100
VR-TP650V-102
6
8
10
13
16
18
19
20
22
25
28
30
32
34
35
38
40
42
44
45
48
50
51
53
55
57
60
62
63
65
70
75
76
80
90
100
102
17
19
21
24
27
29
30
31
33
36
39
41
43
45
46
49
51
53
55
56
59
61
62
64
66
68
71
73
74
76
81
86
88
92
102
112
114

20C / 100C
20C
[bar]
[bar]
12,9 / 10,3
39
11,8 / 9,4
36
10,9 / 8,7
33
9,9 / 7,9
30
9,1 / 7,2
27
8,6 / 6,8
26
8,4 / 6,7
25
8,2 / 6,5
25
7,8 / 6,2
24
7,3 / 5,8
22
6,9 / 5,5
21
6,6 / 5,2
20
6,4 / 5,1
19
6,1 / 4,9
19
6,0 / 4,8
18
5,7 / 4,5
17
5,5 / 4,4
17
5,3 / 4,2
16
5,2 / 4,1
16
5,0 / 4,0
16
4,8 / 3,8
14
4,6 / 3,6
14
4,5 / 3,6
14
4,4 / 3,5
13
4,2 / 3,3
13
4,1 / 3,2
12
3,9 / 3,1
12
3,8 / 3,0
11
3,7 / 2,9
11
3,6 / 2,8
11
3,3 / 2,6
10
3,0 / 2,4
9
3,0 / 2,4
9
2,8 / 2,2
8
2,3 / 1,8
7
1,9 / 1,5
6
1,8 / 1,4
6
bending
radius
[mm]
29
31
34
39
45
43
52
54
60
68
79
86
94
104
108
112
117
121
125
129
136
141
144
150
156
162
171
178
181
188
199
228
232
251
303
334
382
standard
length
[m]
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
231
INDUSTRIAL HOSES - TYGON

Tygon is a registered trademark of thermoplastic hoses manufactured by Saint-Gobain Performance Plastics
Corporation. There are many formulations (compounds) of the materials used to produce the hoses, which include:
silicone, PVC, polyurethane, fluoropolymers, thermoplastic elastomers and other materials.
Excellent physical and chemical properties of these materials added to their perfect finish resulted in a unique, state
of the art product. The distinctive features of the hoses include: transparency, flexibility, kink resistance, resilience,
gas permeability, chemical resistance, surface smoothness. They are non-hemolytic, non-toxic and biocompatible.
The most sophisticated formulations of the compounds employed to manufacture Tygon hoses allow for their use
in diverse applications in: food, chemical and petrochemical industry, pharmacology, medicine, biotechnology, in
peristaltic pumps and laboratories. The Tygon brand name is commonly used and recognized by scientists and
engineers, identified with the highest quality and perfect finish.
TYGON hoses basic application:
- chemical processes,
- transfer of beverages, dairy products and food products,
- scientific and industrial laboratories,
- medicine (hospitals and laboratories),
- biotechnology and pharmaceutical industry,
- semiconductors, electronics,
- peristaltic pumps.
For proper TYGON hose selection, contact Sales Department of TUBES INTERNATIONAL. Information required
for the selection process:
- medium,
- temperature range,
- working pressure,
- size tolerance,
- flexibility, bending radius,
- external conditions,
- cleaning method (sterilization),
- standards of hose material (FDA, ISO 10993 etc.),
- required resistance to flexural fatigue, spalling, decontamination with the hose
extractables, fluid absorption and adsorption, bacteria growth,
- requirements for hose utilization method.
Hose service life in a peristaltic pump application

1000 1000 1000 1000 1000 1000 1000
1000
lack of vacuum
800
800
vacuum 0,7 bar
600
600
500
400
150
50
-H
30 25
on
S-
-3
60
3
35 30
Ty
g
on
Ty
g
Fon
Ty
g
Ty
go
n
60 60
40
40
-A
44
-
4X
65 65
B-
ho
s
65 60
VC
ho
s
al
P
on
e
33
50
Ty
go
n
pi
ca
ls
F-
Fl
u
ra
C
ne
pr
e
or
75 50
ty
m
ic
he
Eon
Ty
g
50
50
-A
al
L
LF
T
BP
ed
m
Ph
ar
or
pr
e
ne
A-
60
-
F
60
Ane
pr
e
or
N
75 50
pi
c
90
ty
200
ilic
number of hours
1200
The data above shows the performance of a number of hoses in a peristaltic pump with 3-roller pump head,
operating at 600 RPM (room temperature (23C); 6,4 mm hose internal diameter; 9,6 mm hose external diameter).
TYGON is a registered trademark of SAINT-GOBAIN PERFORMANCE PLASTICS.
232
TYGON R-3603
Working temp.: +74C (sterilization with steam
or ethylene oxide)
Brittle temp.:
-50C
Hardness:
55 Shore (A)
Density:
1,18 g/cm3
Length:
15 m
Characteristics:
Completely transparent, flexible laboratory hose with an outstanding resistance to all nonorganic chemicals. Widely used in peristaltic pumps. Glassy-smooth, non-porous internal layer
helps to prevent impurities buildup so that cleaning is facilitated. Superb standard of consistency
for reproducible results in every production cycle.
code
I.D.
[mm]
O.D.
[mm]
VE-T3601-13
VE-T3602-13
VE-T3602-23
VE-T3603-13
VE-T3603-23
VE-T3604-13
VE-T3604-23
VE-T3605-13
VE-T3605-23
VE-T3606-13
VE-T3606-23
VE-T3606-33
VE-T3606-43
VE-T3608-13
VE-T3608-23
VE-T3608-33
VE-T3608-43
VE-T3610-23
VE-T3610-33
VE-T3610-43
VE-T3610-53
VE-T3612-23
VE-T3612-33
VE-T3612-43
VE-T3614-23
VE-T3614-33
VE-T3614-43
VE-T3616-23
VE-T3616-33
VE-T3616-43
VE-T3616-53
VE-T3618-33
VE-T3618-43
VE-T3620-33
VE-T3620-43
VE-T3620-53
VE-T3622-33
VE-T3624-43
0,8
1,6
1,6
2,4
2,4
3,2
3,2
4
4
4,8
4,8
4,8
4,8
6,4
6,4
6,4
6,4
8
8
8
8
9,5
9,5
9,5
11,1
11,1
11,1
12,7
12,7
12,7
12,7
14,3
14,3
15,9
15,9
15,9
17,5
19
2,4
3,2
4,8
4
5,6
4,8
6,4
5,6
7,2
6,4
8
9,6
11,2
8
9,6
11,2
12,8
11,2
12,8
14,4
16
12,7
14,3
15,9
14,3
15,9
17,5
15,9
17,5
19,1
20,7
19,1
20,7
20,7
22,3
23,9
22,3
25,4
wall
thickness
[mm]
imperial size
0,8
0,8
1,6
0,8
1,6
0,8
1,6
0,8
1,6
0,8
1,6
2,4
3,2
0,8
1,6
2,4
3,2
1,6
2,4
3,2
4
1,6
2,4
3,2
1,6
2,4
3,2
1,6
2,4
3,2
4
2,4
3,2
2,4
3,2
4
2,4
3,2
min. bending
radius
[mm]
working press.
23C
[bar]
vacuum
23C
[mm Hg]
3
6
3
10
6
13
10
10
13
25
16
13
10
41
25
19
13
35
25
22
19
38
35
29
57
44
35
73
57
38
38
63
51
76
60
51
89
83
5,52
3,10
3,10
2,07
3,79
1,72
3,10
1,38
2,41
1,38
2,07
2,76
3,79
1,03
1,72
2,41
2,76
1,38
2,07
2,41
3,10
1,38
1,72
2,07
1,03
1,38
1,72
0,69
1,38
1,72
2,07
1,03
1,38
1,03
1,38
1,72
1,03
1,24
759
759
759
759
759
508
759
305
759
229
759
759
759
127
508
759
759
330
759
759
759
229
533
759
178
381
711
127
305
533
759
229
432
178
330
533
152
229
233

TYGON R-3603
code
I.D.
[mm]
O.D.
[mm]
VE-T3624-53
VE-T3624-63
VE-T3624-83
VE-T3628-43
VE-T3628-53
VE-T3632-43
VE-T3632-63
VE-T3632-83
VE-T3636-63
VE-T3640-43
VE-T3640-63
VE-T3648-63
VE-T3648-83
VE-T3656-83
VE-T3664-83
19
19
19
22,2
22,2
25,4
25,4
25,4
28,6
31,8
31,8
38,1
38,1
44,5
50,8
27
28,6
31,8
28,6
30,2
31,8
35
38,2
38,2
38,2
41,4
47,7
50,9
57,3
63,6
VE-T360B-103
VE-T360C-103
VE-T360D-103
VE-T360E-153
VE-T360F-153
VE-T360G-153
VE-T360H-203
VE-T360J-203
2
3
4
5
6
7
8
10
4
5
6
8
9
10
12
14
wall
thickness
[mm]
4
4,8
6,4
3,2
4
3,2
4,8
6,4
4,8
3,2
4,8
4,8
6,4
6,4
6,4
metric size
1
1
1
1,5
1,5
1,5
2
2
min. bending
radius
[mm]
70
60
51
105
89
121
102
76
114
200
140
184
149
191
238
working press.
23C
[bar]
1,38
1,72
2,07
1,03
1,38
1,03
1,38
1,72
1,24
0,83
1,03
1,03
1,24
1,10
1,03
vacuum
23C
[mm Hg]
381
533
759
178
279
127
305
533
229
76
178
127
229
178
127
7
13
16
19
22
29
29
42
2,76
2,07
1,72
2,07
1,72
1,38
1,72
1,38
759
759
533
759
559
381
533
356
TYGON E-LFL
Working temp.: +74C (sterilization with steam
or ethylene oxide)
Brittle temp.:
-55C
Hardness:
56 Shore (A)
Density:
1,17 g/cm3
Length:
7,5 m (from 19 mm - 3 m)
Characteristics:
234
Completely transparent hose designed for peristaltic pumps. The hose features outstanding
resistance to abrasion, spalling, aging and chemicals. It is non-toxic. Widely used in food,
cosmetic, pharmaceutical and chemical industry. Meets the requirements of USP Class VI,
FDA and EU 2002/95/EC (ROHS) standards.
code
I.D.
[mm]
O.D.
[mm]
VE-AVX42003
VE-AVX42007
VE-AVX42012
VE-AVX42017
VE-AVX42019
VE-AVX42022
VE-AVX42029
VE-AVX42038
VE-AVX06057
VE-AVX06064
1,6
3,2
4,8
6,4
6,4
8
9,5
12,7
19
25,4
4,8
6,4
8
9,6
12,8
11,2
15,9
19,1
31,8
35
wall
thickness
[mm]
1,6
1,6
1,6
1,6
3,2
1,6
3,2
3,2
6,4
4,8
min. bending
radius
[mm]
6
13
19
25
19
32
25
38
44
83
working press.
23C
[bar]
3,5
2,3
1,7
1,4
2,4
1,1
1,7
1,4
1,7
1
vacuum
23C
[mm Hg]
760
760
760
381
760
254
760
508
760
127
TYGON 2375
Brittle temp.:
-59C
Hardness:
75 Shore (A)
Density:
0,90 g/cm3
Length:
15 m ( 25,4 mm - 7,5 m)
Characteristics:
Transparent, flexible hose with an excellent resistance to highly aggressive chemicals (acids,
bases, ketones, salts and alcohols). The material of the hose is plasticizer-free so that it
minimizes the risk of fluid contamination as well as premature cracking or embrittlement.
Glassy-smooth internal layer helps to prevent impurities buildup. Compliant with FDA, NSF51
and EU 2002/95/EC (ROHS).
code
I.D.
[mm]
O.D.
[mm]
VE-AJK00002
VE-AJK00003
VE-AJK00004
VE-AJK00007
VE-AJK00009
VE-AJK00012
VE-AJK00017
VE-AJK00022
VE-AJK00027
VE-AJK00029
VE-AJK00038
VE-AJK00046
VE-AJK00053
VE-AJK42064
1,6
1,6
2,4
3,2
4
4,8
6,4
8
9,5
9,5
12,7
15,9
19
25,4
3,2
4,8
4
6,4
5,6
8
9,6
11,2
12,7
15,9
19,1
22,3
25,4
35
wall
thickness
[mm]
0,8
1,6
0,8
1,6
0,8
1,6
1,6
1,6
1,6
3,2
3,2
3,2
3,2
4,8
min. bending
radius
[mm]
6
3
6
6
6
13
19
32
38
29
38
63
70
83
working press.
23C
[bar]
2,76
4,48
1,72
2,76
1,38
2,07
1,38
1,38
1,17
1,72
1,72
1,38
1,17
1,31
vacuum
73C
[mm Hg]
759
759
759
759
759
759
759
759
508
759
759
759
508
635
TYGON 2475 I.B.

Working temp.: +52C (sterilization with
Brittle temp.:
-78C
Hardness:
72 Shore (A)
Density:
0,90 g/cm3
Length:
15 m
( 25,4 mm - 7,5 m, 38 mm - 3 m)
Characteristics:
Transparent, hydrophobic and flexible hose resistant to the absorption/adsorption of aqueous

fluids. The unique construction of the hose ensures extremely low fluid migration into the
tubing wall. The lack of plasticizers prevents fluid contamination. Compliant with FDA, USP
and NSF standards.
code
I.D.
[mm]
O.D.
[mm]
VE-ACX00019
VE-ACX00029
VE-ACX00038
VE-ACX00046
VE-ACX00054
VE-ACX42064
6,4
9,5
12,7
15,9
19
25,4
12,8
15,9
19,1
22,3
27
35
wall
thickness
[mm]
3,2
3,2
3,2
3,2
4
4,8
min. bending
radius
[mm]
10
25
25
44
32
89
working press.
23C
[bar]
15,5
14,5
15,9
9,3
9,3
8,6
vacuum
23C
[mm Hg]
759
759
759
759
759
759
235
TYGON 2475
Working temp.: +52C (sterilization with ethylene
oxide or radiation)
Brittle temp.:
-78C
Hardness:
72 Shore (A)
Density:
0,90 g/cm3
Length:
15 m ( 25,4 mm - 7,5 m)
Characteristics:
Transparent, hydrophobic and flexible hose resistant to the absorption/adsorption of aqueous

fluids. The unique construction of the hose ensures extremely low fluid migration into the tubing
wall. The lack of plasticizers prevents fluid contamination. Compliant with FDA, USP Class VI
and NSF standards.
code
I.D.
[mm]
O.D.
[mm]
VE-ACG00003
VE-ACG00007
VE-ACG00012
VE-ACG00017
VE-ACG00022
VE-ACG00027
VE-ACG00038
VE-ACG00046
VE-ACG00053
VE-ACG00064
1,6
3,2
4,8
6,4
8
9,5
12,7
15,9
19
25,4
4,8
6,4
8
9,6
11,2
12,7
19,1
22,3
25,4
35
wall
thickness
[mm]
1,6
1,6
1,6
1,6
1,6
1,6
3,2
3,2
3,2
4,8
min. bending
radius
[mm]
3
6
13
19
35
44
38
57
86
76
working press.
23C
[bar]
5,86
3,44
2,75
2,06
1,24
1,37
1,99
1,72
1,44
1,37
vacuum
23C
[mm Hg]
759
759
759
759
759
635
759
759
759
759
TYGON F4040-A
Working temp.:
Brittle temp.:
Hardness:
Density:
Length:
Characteristics:
236
+74C
-37C
57 Shore (A)
1,26 g/cm3
15 m
Translucent, yellow, flexible hose designed to transfer fuel, lubricant and other petroleum-based
products. Resistant to ageing, ozone, UV radiation, swelling and hardening caused by washing
out of plasticizers. The rate of aromatic content permeation is very low. Meets the requirements
of EU 2002/95/EC (ROHS) standard.
code
I.D.
[mm]
O.D.
[mm]
VE-T4003-C3
VE-T4003-D3
VE-T4004-23
VE-T4006-23
VE-T4008-23
VE-T4010-23
VE-T4012-23
VE-T4012-43
VE-T4014-23
VE-T4016-23
VE-T4016-43
VE-T4020-43
VE-T4024-43
2
2,4
3,2
4,8
6,4
8
9,5
9,5
11,1
12,7
12,7
15,9
19
3,5
4,8
6,4
8
9,6
11,2
12,7
15,9
14,3
15,9
19,1
22,3
25,4
wall
thickness
[mm]
0,8
1,2
1,6
1,6
1,6
1,6
1,6
3,2
1,6
1,6
3,2
3,2
3,2
min. bending
radius
[mm]
6
6
10
16
25
35
48
29
60
73
44
64
83
working press.
23C
[bar]
2,76
3,45
3,45
2,41
2,07
1,72
1,38
2,41
1,03
1,03
2,07
1,72
1,38
vacuum
23C
[mm Hg]
759
759
759
759
559
356
254
759
178
127
559
356
254
TYGON S-50-HL
Brittle temp.:
-48C
Hardness:
66 Shore (A)
Density:
1,20 g/cm3
Length:
15 m
Characteristics:
Completely transparent, flexible hose designed for medical applications. Conforms and so is
manufactured to the ISO 10993 standards of biocompatibility. Due to its construction widely
used in blood transfer applications, dialysis equipment, wound drainage, etc. Used in peristaltic
pumps as well. Meets USP (Class VI) standards.
code
I.D.
[mm]
tolerance
[mm]
O.D.
[mm]
tolerance
[mm]
wall
thickness
[mm]
VE-T5001-13
VE-T5002-13
VE-T5002-23
VE-T5003-13
VE-T5003-23
VE-T5004-13
VE-T5004-23
VE-T5005-13
VE-T5005-23
VE-T5006-13
VE-T5006-23
VE-T5006-33
VE-T5006-43
VE-T5008-13
VE-T5008-23
VE-T5008-33
VE-T5008-43
VE-T5010-23
VE-T5010-33
VE-T5010-43
VE-T5012-23
VE-T5012-33
VE-T5012-43
VE-T5014-23
VE-T5014-33
VE-T5014-43
VE-T5016-23
VE-T5016-33
VE-T5016-43
VE-T5018-33
VE-T5020-33
VE-T5020-43
VE-T5020-53
VE-T5024-43
VE-T5028-43
VE-T5032-43
0,8
1,6
1,6
2,4
2,4
3,2
3,2
4
4
4,8
4,8
4,8
4,8
6,4
6,4
6,4
6,4
8
8
8
9,5
9,5
9,5
11,1
11,1
11,1
12,7
12,7
12,7
14,3
15,9
15,9
15,9
19
22,2
25,4
0,05
0,08
0,08
0,08
0,08
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,2
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,38
2,4
3,2
4,8
4
5,6
4,8
6,4
5,6
7,2
6,4
8
9,6
11,2
8
9,6
11,2
12,8
11,2
12,8
14,4
12,7
14,3
15,9
14,3
15,9
17,5
15,9
17,5
19,1
19,1
20,7
22,3
23,9
25,4
28,6
31,8
0,08
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,13
0,2
0,2
0,2
0,2
0,2
0,2
0,25
0,2
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,25
0,38
0,38
0,38
0,8
0,8
1,6
0,8
1,6
0,8
1,6
0,8
1,6
0,8
1,6
2,4
3,2
0,8
1,6
2,4
3,2
1,6
2,4
3,2
1,6
2,4
3,2
1,6
2,4
3,2
1,6
2,4
3,2
2,4
2,4
3,2
4
3,2
3,2
3,2
min.
bending
radius
[mm]
3
6
3
10
6
13
10
19
13
25
16
13
10
41
25
19
15
34
25
22
44
34
28
57
44
35
73
54
44
63
76
69
51
83
105
130
working
press
23C
[bar]
6,84
3,74
6,84
2,04
4,76
2,04
3,74
1,70
3,06
1,36
2,72
3,74
4,76
1,22
2,04
3,06
3,74
1,70
2,38
3,06
1,36
2,04
2,72
1,36
1,70
2,38
1,22
1,70
2,04
1,36
1,36
1,70
2,04
1,36
1,36
1,22
vacuum
23C
[mm Hg]
759
759
759
759
759
635
759
381
759
254
759
759
759
127
635
759
759
381
759
759
254
635
759
203
457
759
152
381
635
254
229
381
635
254
203
127
237
TYGON B-44-4X
oxide or radiation)
Brittle temp.:
-44C
Hardness:
65 Shore (A)
Density:
1,21 g/cm3
Length:
15 m (from 50,8 mm - 6 m)
Characteristics:
238
Transparent, flexible, taste and odour free, non-toxic hose designed for food products with oil
and fat content (oils, milk and dairy products). Glassy-smooth, non-porous internal layer helps to
prevent impurities build-up and bacteria growth. Excellent resistance to harsh alkaline cleaners
and sanitizers. Meets FDA, 3-A and NSF standards.
code
I.D.
[mm]
O.D.
[mm]
VE-T4401-13
VE-T4402-13
VE-T4402-23
VE-T4403-13
VE-T4404-13
VE-T4404-23
VE-T4405-13
VE-T4405-23
VE-T4406-13
VE-T4406-23
VE-T4406-33
VE-T4408-23
VE-T4408-33
VE-T4408-43
VE-T4410-23
VE-T4410-33
VE-T4410-43
VE-T4410-53
VE-T4412-23
VE-T4412-33
VE-T4412-43
VE-T4414-23
VE-T4414-33
VE-T4416-23
VE-T4416-33
VE-T4416-43
VE-T4416-53
VE-T4420-33
VE-T4420-43
VE-T4420-53
VE-T4424-43
VE-T4424-53
VE-T4424-63
VE-T4424-83
VE-T4428-43
VE-T4432-43
VE-T4432-53
VE-T4432-63
VE-T4432-83
VE-T4436-43
0,8
1,6
1,6
2,4
3,2
3,2
4
4
4,8
4,8
4,8
6,4
6,4
6,4
8
8
8
8
9,5
9,5
9,5
11,1
11,1
12,7
12,7
12,7
12,7
15,9
15,9
15,9
19
19
19
19
22,2
25,4
25,4
25,4
25,4
28,6
2,4
3,2
4,8
4
4,8
6,4
5,6
7,2
6,4
8
9,6
9,6
11,2
12,8
11,2
12,8
14,4
16
12,7
14,3
15,9
14,3
15,9
15,9
17,5
19,1
20,7
20,7
22,3
23,8
25,4
27
28,6
31,8
28,6
31,8
33,3
35
38,2
35
wall
thickness
[mm]
0,8
0,8
1,6
0,8
0,8
1,6
0,8
1,6
0,8
1,6
2,4
1,6
2,4
3,2
1,6
2,4
3,2
4
1,6
2,4
3,2
1,6
2,4
1,6
2,4
3,2
4
2,4
3,2
4,0
3,2
4
4,8
6,4
3,2
3,2
4
4,8
6,4
3,2
min. bending
radius
[mm]
3
6
3
10
13
10
19
13
25
16
13
25
19
16
35
25
22
19
44
35
29
57
44
73
54
44
38
76
60
51
83
70
60
51
105
130
111
95
76
159
working press.
23C
[bar]
6,89
4,14
6,89
2,96
2,34
4,14
1,93
3,45
1,72
2,96
4,14
2,34
3,24
4,14
1,93
2,76
3,45
4,14
1,72
2,34
3,03
1,52
2,07
1,31
1,86
2,34
2,76
1,59
2,00
2,41
1,72
2,07
2,34
2,96
1,52
1,38
1,65
1,86
2,34
1,24
vacuum
23C
[mm Hg]
759
759
759
759
635
759
406
759
279
759
759
635
759
759
406
759
759
759
279
635
759
203
482
152
356
635
759
229
406
660
279
457
660
759
203
152
254
356
635
127

TYGON B-44-4X
table follow up
code
I.D.
[mm]
O.D.
[mm]
VE-T4440-63
VE-T4448-83
VE-T4464-82
VE-T4464-163
VE-T4480-82
VE-T4480-122
VE-T4496-82
VE-T4499-162
31,8
38,1
50,8
50,8
63,5
63,5
76,2
101,6
41,4
50,9
63,6
76,2
76,3
82,5
89
127
wall
thickness
[mm]
4,8
6,4
6,4
12,7
6,4
9,5
6,4
12,7
min. bending
radius
[mm]
140
150
238
140
340
254
457
432
working press.
23C
[bar]
1,59
1,72
1,31
2,34
1,10
1,59
0,97
1,31
vacuum
23C
[mm Hg]
229
279
152
635
102
229
51
152
TYGON B-44-EU
oxide or radiation)
Brittle temp.:
-35C
Hardness:
64 Shore (A)
Density:
1,21 g/cm3
Length:
15 m
Characteristics:
Transparent, flexible, taste and odour free, non-toxic hose designed to transfer dry, moist and
aqueous products, some acids, alcohols and food products e.g. milk. Glassy-smooth, non-porous
internal layer helps to prevent impurities build-up and bacteria growth. Excellent resistance to
harsh alkaline cleaners and sanitizers. It is not suitable for products with fat content. Metric
diameters available on request only on quantities over 500 m. Meets the requirements of EU
2002/95/EC standard.
code
I.D.
[mm]
O.D.
[mm]
VE-T4401-13EU
VE-T4402-13EU
VE-T4404-13EU
VE-T4404-23EU
VE-T4405-23EU
VE-T4406-23EU
VE-T4408-23EU
VE-T4412-23EU
VE-T4412-43EU
VE-T4416-23EU
VE-T4416-43EU
VE-T4420-43EU
VE-T4424-43EU
VE-T4428-43EU
VE-T4432-43EU
VE-T4416-83EU
0,8
1,6
3,2
3,2
4
4,8
6,4
9,5
9,5
12,7
12,7
15,9
19
22,2
25,4
25,4
2,4
3,2
4,8
6,4
7,2
8
9,6
12,7
15,9
15,9
19,1
22,3
25,4
28,6
31,8
38,2
wall
thickness
[mm]
0,8
0,8
0,8
1,6
1,6
1,6
1,6
1,6
3,2
1,6
3,2
3,2
3,2
3,2
3,2
6,4
min. bending
radius
[mm]
3
6
13
10
13
16
25
44
29
73
44
60
83
105
130
76
working press.
23C
[bar]
6,89
4,14
2,34
4,14
3,45
2,96
2,34
1,72
3,03
1,31
2,34
2,00
1,72
1,52
1,38
2,34
vacuum
23C
[mm Hg]
759
759
635
759
759
759
635
279
759
152
635
406
279
203
152
635
239
TYGON B-44-4X-I.B.
oxide or radiation)
Brittle temp.:
-44C
Hardness:
65 Shore (A)
Density:
1,21 g/cm3
Length:
15 m (from 38,1 mm - 6 m)
Characteristics:
Transparent, flexible, non-toxic hose reinforced with a polyester braid. Designed for food
products with oil and fat content (oils, milk and dairy products). It is taste and odour free.
Glassy-smooth, non-porous internal layer helps to prevent impurities build-up and bacteria
growth. Excellent resistance to harsh alkaline cleaners and sanitizers. Meets FDA, 3-A and
NSF standards.
code
I.D.
[mm]
O.D.
[mm]
VE-T1408-33
VE-T1412-43
VE-T1416-43
VE-T1420-43
VE-T1424-43
VE-T1432-63
VE-T1440-63
VE-T1448-83
VE-T1464-122
VE-T1496-122
6,4
9,5
12,7
15,9
19
25,4
31,8
38,1
50,8
76,2
11,2
15,9
19,1
22,3
25,4
35
41,4
50,9
70
95,2
wall
thickness
[mm]
2,4
3,2
3,2
3,2
3,2
4,8
4,8
6,4
9,6
9,5
min. bending
radius
[mm]
38
29
54
60
83
95
140
149
175
337
working press.
23 / 71C
[bar]
17,24 / 6,21
11,72 / 6,21
13,79 / 6,55
11,38 / 7,24
10,00 / 5,86
6,89 / 4,14
5,86 / 3,79
5,17 / 3,10
4,14 / 2,76
2,76 / 1,72
vacuum
71C
[mm Hg]
759
635
254
254
127
127
76
51
25
25
FLURAN F-5500-A
Working temp.:
Brittle temp.:
Hardness:
Density:
Length:
Characteristics:
240
+204C
-51C
60 Shore (A)
1,90 g/cm3
15 m
Flexible, opaque, black hose made of fluoroelastomer. Highly resistant to corrosive chemicals,
oils, fuels, solvents and most mineral acids. Such properties as colour, resistance to ageing,
ozone and weather conditions make it suitable for the transfer of light-sensitive products. It
is very flexible and resilient - the perfect choice for peristaltic pump applications of extremely
corrosive materials. Food grade version is available on request.
code
I.D.
[mm]
O.D.
[mm]
VE-T5502-13
VE-T5504-23
VE-T5506-23
VE-T5508-23
VE-T5510-23
VE-T5512-23
1,6
3,2
4,8
6,4
8
9,5
3,2
6,4
8
9,6
11,2
12,7
wall
thickness
[mm]
0,8
1,6
1,6
1,6
1,6
1,6
min. bending
radius
[mm]
6
13
19
25
32
51
working press.
23C / 135C
[bar]
1,24 / 0,83
1,31 / 0,90
1,03 / 0,62
0,90 / 0,55
0,76 / 0,41
0,69 / 034
vacuum
135C
[mm Hg]
759
759
759
508
254
127
ISO-VERSINIC
Working temp.: +200C (with peaks up to +300C)
Brittle temp.:
-20C
Hardness:
67 Shore (A) - to 4x6 mm,
72 Shore (A) - to 4x8 mm
75 Shore (A) - from 15x21 mm
Density:
1,90 g/cm3
Characteristics:
Lightweight, flexible, black hose made of fluoroelastomer with an excellent chemical resistance
to strong acids, oxidizers, solvents, alcohols, bleachers, etc. Resistant to flame, ageing and
weather conditions.
code
I.D.
[mm]
O.D.
[mm]
VE-770060
VE-770100
VE-770130
VE-770180
VE-770230
VE-770250
VE-770260
VE-770270
VE-770300
VE-770310
VE-770320
VE-770350
VE-770360
VE-770380
VE-770420
VE-770440
VE-770460
VE-770470
VE-770490
VE-770500
VE-770520
1
1,5
2
3
4
4
5
5
6
6
6
7
8
8
10
12
15
18
20
25
30
3
3
4
5
6
8
8
10
9
10
12
10
11
12
14
17
21
24
27
32
40
wall
thickness
[mm]
1
0,75
1
1
1
2
1,5
2,5
1,5
2
3
1,5
1,5
2
2
2,5
3
3
3,5
3,5
5
min. bending
radius
[mm]
2
4
6
11
22
13
18
9
29
19
18
34
41
31
48
45
64
79
88
124
132
standard
length
[m]
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
25
10
10
10
10
10
241

TYGON 3350
Brittle temp.:
-80C
Hardness:
50 Shore (A)
Density:
1,14 g/cm3
Length:
15 m
Characteristics:
242
Translucent, flexible, silicone hose. Ultra smooth internal layer is obtained in a platinum-curing
process. Smooth fluid path increases flow rates, facilitates cleaning and prevents bacteria growth.
Entirely non-toxic, non-hemolytic and non-pyrogenic, Used in pharmaceutical, cosmetic and
medical industry. Meets the requirement of: FDA 21 CFR Part 177.2600; NSF51; ISO10993.
code
I.D.
[mm]
O.D.
[mm]
VE-T3301-13
VE-T3302-13
VE-T3302-23
VE-T3303-13
VE-T3303-23
VE-T3304-13
VE-T3304-23
VE-T3305-13
VE-T3306-13
VE-T3306-23
VE-T3306-33
VE-T3306-43
VE-T3308-13
VE-T3308-23
VE-T3308-33
VE-T3308-43
VE-T3310-23
VE-T3310-33
VE-T3312-23
VE-T3312-33
VE-T3312-43
VE-T3314-23
VE-T3314-33
VE-T3316-23
VE-T3316-33
VE-T3316-43
VE-T3320-33
VE-T3320-43
VE-T3324-43
VE-T3332-43
VE-T3340-43
VE-T3348-83
0,8
1,6
1,6
2,4
2,4
3,2
3,2
4
4,8
4,8
4,8
4,8
6,4
6,4
6,4
6,4
8
8
9,5
9,5
9,5
11,1
11,1
12,7
12,7
12,7
15,9
15,9
19
25,4
31,8
38,1
2,4
3,2
4,8
4
5,6
4,8
6,4
5,6
6,4
8
9,6
11,2
8
9,6
11,2
12,8
11,2
12,8
12,7
14,3
15,9
14,3
15,9
15,9
17,5
19,1
20,7
22,3
25,4
31,8
38,2
50,9
VE-T330A-053
VE-T330B-103
VE-T330H-153
VE-T330I-153
VE-T330L-153
VE-T330N-203
VE-T330P-203
VE-T330Q-203
VE-T330S-303
1
2
5
6
7
8
10
12
18
2
4
8
9
10
12
14
16
24
wall
thickness
[mm]
imperial size
0,8
0,8
1,6
0,8
1,6
0,8
1,6
0,8
0,8
1,6
2,4
3,2
0,8
1,6
2,4
3,2
1,6
2,4
1,6
2,4
3,2
1,6
2,4
1,6
2,4
3,2
2,4
3,2
3,2
3,2
3,2
6,4
metric size
0,5
1
1,5
1,5
1,5
2
2
2
3
min. bending
radius
[mm]
working press.
23C / 160C
[bar]
vacuum
23C
[mm Hg]
3
6
6
6
6
10
13
19
25
13
10
10
38
19
16
16
32
16
38
25
25
38
45
76
45
38
76
63
63
127
152
177
1,54 / 1,47
0,98 / 0,91
1,54 / 1,47
0,77 / 0,70
1,26 / 1,12
0,63 / 0,56
0,98 / 0,91
0,49 / 0,42
0,49 / 0,42
0,77 / 0,70
0,98 / 0,91
1,26 / 1,12
0,35 / 0,28
0,63 / 0,56
0,84 / 0,77
0,98 / 0,91
0,49 / 0,42
0,70 / 0,63
0,63 / 0,56
0,77 / 0,70
0,84 / 0,77
0,28 / 0,21
0,56 / 0,49
0,35 / 0,28
0,42 / 0,36
0,63 / 0,56
0,42 / 0,30
0,49 / 0,36
0,49 / 0,36
0,35 / 0,28
0,35 / 0,28
0,42 / 0,35
759
759
759
759
759
508
759
254
127
635
759
759
254
381
759
759
127
508
127
508
759
508
254
254
127
381
127
254
254
254
9
13
19
22
25
38
51
63
76
0,61 / 0,54
0,61 / 0,54
0,47 / 0,40
0,40 / 0,34
0,40 / 0,34
0,40 / 0,34
0,37 / 0,30
0,34 / 0,27
0,34 / 0,27
759
759
635
381
254
381
127
127
127
TYGON R-3400
Working temp.:
Brittle temp.:
Hardness:
Density:
Length:
Characteristics:
+74C
-21C
64 Shore (A)
1,31 g/cm3
15 m
Black, lightweight, flexible, hose resistant to chemicals. Exceptional resistance to UV radiation,

ozone and weather conditions. Meets the requirements of UL 94V-O and UL94HB flammability
standards. Particularly recommended to transfer light-sensitive fluids which undergo degradation
when exposed to UV radiation. Complies with EU 2002/95/EC (ROHS).
code
I.D.
[mm]
O.D.
[mm]
VE-T3402-13
VE-T3403-13
VE-T3403-23
VE-T3404-23
VE-T3405-23
VE-T3406-13
VE-T3406-23
VE-T3406-33
VE-T3408-23
VE-T3408-33
VE-T3410-23
VE-T3412-23
VE-T3412-43
VE-T3414-23
VE-T3416-43
VE-T3420-43
VE-T3424-43
1,6
2,4
2,4
3,2
4
4,8
4,8
4,8
6,4
6,4
8
9,5
9,5
11,1
12,7
15,9
19
3,2
4
5,6
6,4
7,2
6,4
8
9,6
9,6
11,1
11,1
12,7
15,9
14,3
19
22,2
25,4
wall
thickness
[mm]
0,8
0,8
1,6
1,6
1,6
0,8
1,6
2,4
1,6
2,4
1,6
1,6
3,2
1,6
3,2
3,2
3,2
min. bending
radius
[mm]
6
10
6
9
13
25
16
13
25
19
35
44
29
57
44
60
83
working press.
23C
[bar]
4,14
3,10
5,52
4,14
3,45
1,72
3,10
4,14
2,41
3,45
2,07
1,72
3,10
1,38
2,41
2,07
1,72
vacuum
23C
[mm Hg]
759
759
759
759
759
279
759
759
635
759
406
279
759
203
635
406
279
243
TYGOTHANE C-210A
Working temp.:
Brittle temp.:
Hardness:
Density:
Length:
Characteristics:
244
+93C
-73C
82 Shore (A)
1,19 g/cm3
30 m
Transparent, flexible hose made of tough, ester-based polyurethane. Superb standard of

consistency of dimension tolerances in every production process facilitates proper and leaktight assembly. High tear strength and excellent abrasion resistance make it an ideal solution
for fuel and lubricant lines, pneumatic lines, abrasive product transfer, cable jacketing and
many other applications. Complies with FDA and EU 2002/95/EC (ROHS).
code
I.D.
[mm]
O.D.
[mm]
VE-T9502-14
VE-T9504-14
VE-T9504-24
VE-T9506-14
VE-T9506-24
VE-T9506-34
VE-T9508-14
VE-T9508-24
VE-T9508-34
VE-T9508-44
VE-T9510-24
VE-T9512-24
VE-T9512-34
VE-T9512-44
VE-T9514-34
VE-T9514-44
VE-T9516-24
VE-T9516-34
VE-T9516-44
VE-T9520-24
VE-T9520-34
VE-T9520-44
VE-T9524-34
VE-T9524-44
VE-T9532-44
1,6
3,2
3,2
4,8
4,8
4,8
6,4
6,4
6,4
6,4
8
9,5
9,5
9,5
11,1
11,1
12,7
12,7
12,7
15,9
15,9
15,9
19
19
25,4
3,2
4,8
6,4
6,4
8
9,6
8
9,6
11,2
12,8
11,2
12,7
14,3
15,9
15,9
17,5
15,9
17,5
19,1
19,1
20,7
22,3
23,8
25,4
31,8
wall
thickness
[mm]
0,8
0,8
1,6
0,8
1,6
2,4
0,8
1,6
2,4
3,2
1,6
1,6
2,4
3,2
2,4
3,2
1,6
2,4
3,2
1,6
2,4
3,2
2,4
3,2
3,2
min. bending
radius
[mm]
5
13
8
25
16
11
40
24
17
14
49
44
33
27
43
35
73
54
44
105
76
60
102
83
130
working press.
23C / 80C
[bar]
4,83 / 2,76
3,10 / 1,72
5,10 / 3,10
2,34 / 1,31
3,86 / 2,28
4,83 / 3,03
1,93 / 0,83
2,90 / 1,72
4,00 / 1,93
4,83 / 3,10
2,48 / 1,52
2,34 / 1,31
3,10 / 1,86
3,72 / 2,28
2,76 / 1,45
3,38 / 2,00
1,79 / 0,97
2,48 / 1,24
3,17 / 1,86
1,65 / 0,76
2,21 / 1,10
2,62 / 1,45
1,79 / 0,90
2,28 / 1,38
1,93 / 0,97
vacuum
80C
[mm Hg]
759
759
759
508
759
759
127
759
759
759
759
635
759
759
759
759
127
759
759
127
381
759
127
635
254
TYGOTHANE C-544A I.B.

Working temp.:
Brittle temp.:
Hardness:
Density:
Length:
Characteristics:
+82C
-73C
85 Shore (A)
1,12 g/cm3
30 m
Transparent, flexible hose made of tough, ester-based polyurethane with polyester braid
reinforcement. Superb standard of consistency of dimension tolerances in every production
process facilitates proper and leak-tight assembly. High tear strength and excellent abrasion
resistance make it an ideal solution for fuel and lubricant lines, pneumatic lines, pneumatic
transfer of abrasive products, cable jacketing and many other applications. Complies with FDA
and EU 2002/95/EC (ROHS).
code
I.D.
[mm]
O.D.
[mm]
VE-AZY02008
VE-AZY02019
VE-AZY02029
VE-AZY02038
VE-AZY02046
VE-AZY02054
VE-AZY02064
VE-AZY00071
VE-AZY00074
VE-AZY00078
3,2
6,4
9,5
12,7
15,9
19
25,5
31,8
38,1
50,8
9,6
12,8
15,9
19,1
22,3
27
35,1
44,6
50,9
63,6
wall
thickness
[mm]
3,2
3,2
3,2
3,2
3,2
4
4,8
6,4
6,4
6,4
min. bending
radius
[mm]
13
19
38
51
76
89
148
152
190
330
working press.
23C / 80C
[bar]
15,51 / 10,34
18,96 / 10,34
14,13 / 7,93
13,44 / 7,58
12,07 / 7,24
10,34 / 6,89
8,27 / 5,52
6,55 / 4,48
5,52 / 3,45
4,83 / 2,76
vacuum
80C
[mm Hg]
759
759
759
759
635
635
381
508
381
254
TYGON SE-200
Working temp.: +77C
(sterilization with ethylene oxide)
Brittle temp.:
-40C
Hardness:
67 Shore (A)
Density:
1,45 g/cm3
Length:
15 m
Characteristics:
Transparent hose made of FEP fluoropolymer. Combining a distinctive degree of physical and
chemical inertness of the internal layer with its excellent chemical resistance, the hose can
easily manage the transfer of corrosive chemicals, solvents, MEK-based solvents, etc. The
inertness to chemicals prevents the contamination and extraction of fluid in the hose. Meets
USP Class VI, FDA and EU 2002/95/EC (ROHS).
code
I.D.
[mm]
O.D.
[mm]
VE-T2003-23
VE-T2004-23
VE-T2006-23
VE-T2008-23
VE-T2012-33
VE-T2016-43
VE-T2024-43
1,6
3,2
4,8
6,4
9,5
12,7
19
3,2
6,4
8
9,6
14,3
19,1
25,4
wall
thickness
[mm]
0,8
1,6
1,6
1,6
2,4
3,2
3,2
min. bending
radius
[mm]
13
25
38
51
89
102
114
working press. working press.

23C
71C
[bar]
[bar]
6,89
3,1
5,86
2,76
5,17
2,62
3,79
2,41
3,45
1,72
3,10
1,24
2,07
0,83
245
TYGON 3370 I.B.

Brittle temp.:
-80C
Hardness:
70 Shore (A)
Density:
1,18 g/cm3
Length:
15 m
Characteristics:
Translucent, flexible silicone hose reinforced with a polyester braid. The internal layer is
manufactured in a special platinum-curing process that helps to achieve an exceptional
grade of smoothness (non-porous) compared to other industrial silicone hoses. The hose has
excellent flow and cleaning properties, inhibits bacterial buildup and is resistant to repeated
CIP and SIP sterilization. It is entirely non-toxic, non-hemolytic, non-pyrogenic, recommended
for pharmaceutical, cosmetic and medical industry applications. Complies with: FDA 21 CFR
Part 177.2600; NSF51; ISO10993; 3-A No18-01.
code
I.D.
[mm]
O.D.
[mm]
VE-T1306-43
VE-T1308-43
VE-T1312-43
VE-T1316-63
VE-T1320-63
VE-T1324-63
VE-T1332-63
VE-T1340-63
VE-T1348-66
4,8
6,4
9,6
12,7
15,9
19
25,4
31,8
38,1
11,3
13,2
17,6
21,5
24,9
29,2
35,3
41,6
47,9
wall
thickness
[mm]
3,25
3,4
3,96
4,4
4,5
5,08
4,96
4,9
5
min. bending
radius
[mm]
6
13
19
32
38
57
89
146
171
working press.
23C / 160C
[bar]
11,56 / 8,50
10,20 / 7,14
8,84 / 6,46
8,50 / 6,12
7,48 / 5,44
6,80 / 5,10
4,76 / 3,40
3,74 / 2,72
2,72 / 2,04
vacuum
23C
[mm Hg]
759
759
759
759
759
759
381
254
127
NORPRENE A-60-F I.B.

Brittle temp.:
-60C
Hardness:
61 Shore (A)
Density:
0,98 g/cm3
Length:
15 m
Characteristics:
246
Beige, flexible, taste and odour free hose with a polyester braid reinforcement designed for
food processing applications. Resistant to cleaners, sanitizers, ageing and ozone. Complies
with FDA3-A and NSF.
code
I.D.
[mm]
O.D.
[mm]
VE-APW00019
VE-APW00029
VE-APW00038
VE-APW00046
VE-APW00054
VE-APW00064
6,4
9,5
12,7
15,9
19
25,4
12,8
15,9
19,1
22,3
26,9
34,9
wall
thickness
[mm]
3,2
3,2
3,2
3,2
3,95
4,75
min. bending
radius
[mm]
19
32
57
63
83
127
working press.
23C / 82C
[bar]
8,62 / 4,83
7,24 / 4,48
6,89 / 4,14
6,55 / 3,79
5,86 / 3,10
5,15 / 2,76
vacuum
82C
[mm Hg]
759
508
381
254
127
178
NORPRENE A-60-F-EU
Brittle temp.:
-60C
Hardness:
61 Shore (A)
Density:
0,98 g/cm3
Length:
15 m
Characteristics:
Beige, flexible, taste and odour free hose designed for food processing applications, including
dairy products transfer. Resistant to cleaners, sanitizers, ageing and ozone. Because of high
resilience and reduced spalling of the hose internal wall, it is the perfect choice for peristaltic
pump applications. Meets the requirements of FDA and European Directives for products
that come into contact with food. Complies with the EU Directives 2002/95/EC (ROHS) and
2002/72/EEC for phthalate free materials.
code
I.D.
[mm]
O.D.
[mm]
VE-R6F02-23-EU
VE-R6F04-23-EU
VE-R6F06-23-EU
VE-R6F08-23-EU
VE-R6F08-43-EU
VE-R6F10-23-EU
VE-R6F12-23-EU
VE-R6F12-43-EU
VE-R6F16-43-EU
VE-R6F20-43-EU
VE-R6F24-43-EU
1,6
3,2
4,8
6,4
6,4
8
9,5
9,5
12,7
15,9
19
4,8
6,4
8
9,6
12,8
11,2
12,7
15,9
19,1
22,3
25,4
VE-R6F0C-103-EU
VE-R6F0D-103-EU
VE-R6F0G-203-EU
VE-R6F0J-203-EU
VE-R6F0L-203-EU
VE-R6F0N-203-EU
VE-R6F0P-203-EU
3
4
4
6
7
8
10
5
6
8
10
11
12
14
wall
thickness
[mm]
imperial size
1,6
1,6
1,6
1,6
3,2
1,6
1,6
3,2
3,2
3,2
3,2
metric size
1
1
2
2
2
2
2
min. bending
radius
[mm]
working press.
23C / 82C
[bar]
vacuum
82C
[mm Hg]
6
13
19
32
19
38
57
32
51
83
102
2,34 / 1,45
1,31 / 0,83
0,90 / 0,55
0,69 / 0,41
1,31 / 0,83
0,55 / 0,34
0,48 / 0,28
0,90 / 0,55
0,69 / 0,41
0,55 / 0,34
0,48 / 0,28
759
759
584
330
759
203
127
584
330
203
127
13
19
13
19
25
32
44
0,97 / 0,62
0,76 / 0,48
1,38 / 0,90
0,97 / 0,62
0,83 / 0,55
0,76 / 0,48
0,62 / 0,41
584
330
759
610
432
330
203
247
NORPRENE A-60-F
Brittle temp.:
-60C
Hardness:
61 Shore (A)
Density:
0,98 g/cm3
Length:
15 m
Characteristics:
Beige, flexible, taste and odour free hose designed for food processing applications. Resistant
to cleaners, sanitizers, ageing and ozone. Because of exceptional flexibility and resilience it is
the perfect choice for peristaltic pump applications . Complies with FDA.
code
I.D.
[mm]
O.D.
[mm]
VE-R6F02-23
VE-R6F04-23
VE-R6F06-23
VE-R6F08-23
VE-R6F08-43
VE-R6F10-23
VE-R6F12-23
VE-R6F12-43
VE-R6F16-43
VE-R6F20-43
VE-R6F24-43
1,6
3,2
4,8
6,4
6,4
8
9,5
9,5
12,7
15,9
19
4,8
6,4
8
9,6
12,8
11,2
12,7
15,9
19,1
22,3
25,4
VE-R6F0C-103
VE-R6F0D-103
VE-R6F0G-203
VE-R6F0J-203
VE-R6F0L-203
VE-R6F0N-203
VE-R6F0P-203
3
4
4
6
7
8
10
5
6
8
10
11
12
14
wall
thickness
[mm]
imperial size
1,6
1,6
1,6
1,6
3,2
1,6
1,6
3,2
3,2
3,2
3,2
metric size
1
1
2
2
2
2
2
min. bending
radius
[mm]
working press.
23C / 82C
[bar]
vacuum
82C
[mm Hg]
6
13
19
32
19
38
57
32
51
83
102
2,34 / 1,45
1,31 / 0,83
0,90 / 0,55
0,69 / 0,41
1,31 / 0,83
0,55 / 0,34
0,48 / 0,28
0,90 / 0,55
0,69 / 0,41
0,55 / 0,34
0,48 / 0,28
759
759
584
330
759
203
127
584
330
203
127
13
19
13
19
25
32
44
0,97 / 0,62
0,76 / 0,48
1,38 / 0,90
0,97 / 0,62
0,83 / 0,55
0,76 / 0,48
0,62 / 0,41
584
330
759
610
432
330
203
NORPRENE CHEMICAL TUBING

Brittle temp.:
-60C
Hardness:
61 Shore (A)
Density:
0,98 g/cm3
15 m
Length:
Characteristics:
248
Beige, flexible, chemical hose designed for peristaltic pumps and many other applications. The
internal layer is made of FEP, plasticizer-free. It is resistant to acids, bases, salts, ketones,
alcohols, cleaners and sanitizers. Complies with FDA 21 CFR and EU 2002/95/EC (ROHS).
code
I.D.
[mm]
O.D.
[mm]
VE-AD300007
VE-AD300012
VE-AD300017
VE-AD300027
VE-AD300038
3,2
4,8
6,4
9,5
12,7
6,4
8
9,5
12,7
19,1
wall
thickness
[mm]
1,6
1,6
1,6
1,6
3,2
min. bending
radius
[mm]
13
25
32
51
57
working press.
23C / 71C
[bar]
2,28 / 0,97
2,00 / 0,69
1,38 / 0,55
0,97 / 0,34
1,10 / 0,55
vacuum
23C
[mm Hg]
759
759
759
635
759
NORPRENE A-60-G
Working temp.:
Brittle temp.:
Hardness:
Density:
Length:
Characteristics:
+135C
-60C
61 Shore (A)
0,98 g/cm3
15 m
Black, flexible hose for general industrial application. Good resistance to abrasion, ageing,
ozone and thermal radiation. Outstanding flexural fatigue resistance, low permeability and high
resistance to non-organic chemicals (acids and bases) makes it perfectly suitable for peristaltic
pumps and vacuum applications.
code
I.D.
[mm]
O.D.
[mm]
VE-R6002-23
VE-R6004-23
VE-R6004-43
VE-R6006-23
VE-R6006-33
VE-R6006-63
VE-R6008-23
VE-R6008-33
VE-R6008-43
VE-R6008-63
VE-R6010-23
VE-R6010-33
VE-R6010-83
VE-R6012-23
VE-R6012-33
VE-R6012-43
VE-R6016-33
VE-R6016-43
VE-R6020-33
VE-R6020-43
VE-R6024-43
VE-R6032-43
1,6
3,2
3,2
4,8
4,8
4,8
6,4
6,4
6,4
6,4
8
8
8
9,5
9,5
9,5
12,7
12,7
15,9
15,9
19
25,4
4,8
6,4
9,6
8
9,6
14,4
9,6
11,2
12,8
16
11,2
12,8
20,8
12,7
14,3
15,9
17,5
19,1
20,7
22,3
25,4
31,8
wall
thickness
[mm]
1,6
1,6
3,2
1,6
2,4
4,8
1,6
2,4
3,2
4,8
1,6
2,4
6,4
1,6
2,4
3,2
2,4
3,2
2,4
3,2
3,2
3,2
min. bending
radius
[mm]
6
13
13
19
13
6
22
19
19
13
32
25
13
35
38
29
57
29
83
70
89
127
working press.
23C / 82C
[bar]
2,34 / 1,45
1,31 / 0,83
2,34 / 1,45
0,90 / 0,55
1,31 / 0,83
2,34 / 1,45
0,69 / 0,41
1,03 / 0,62
1,31 / 0,83
1,79 / 1,10
0,55 / 0,34
0,83 / 0,48
1,93 / 1,17
0,48 / 0,28
0,69 / 0,41
0,90 / 0,55
0,55 / 0,31
0,69 / 0,41
0,48 / 0,28
0,55 / 0,34
0,48 / 0,28
0,41 / 0,21
vacuum
82C
[mm Hg]
759
759
759
759
759
759
401
759
759
759
256
635
759
178
381
704
254
396
127
251
175
127
The position of a hose in a peristaltic pump.
249

TYGOPRENE XL-60
Brittle temp.:
-66C
Hardness:
60 Shore (A)
Density:
1,13 g/cm3
Characteristics:
250
Transparent, lightweight and flexible hose - perfect for peristaltic pump applications as an
alternative to PVC and silicone hoses. It is free of phthalates that are hazardous to human
health posing a risk of cancer (meets the requirements of EU 2002/72/ EEC for products that
come into contact with food ). It is extremely flexible, resistant to ozone, oxygen and ageing.
Resistant to many chemicals, including acids and bases. Not recommended for media with fat
content. Meets the requirements of 94-HB flammability standard.
code
I.D.
[mm]
O.D.
[mm]
VE-AN800003
VE-AN800007
VE-AN800012
VE-AN800017
VE-AN800022
VE-AN800027
VE-AN800038
VE-AN800046
VE-AN800053
1,6
3,2
4,8
6,4
8
9,5
12,7
15,9
19
4,8
6,4
8
9,6
11,2
12,7
19,1
22,3
25,4
wall
thickness
[mm]
1,6
1,6
1,6
1,6
1,6
1,6
3,2
3,2
3,2
working press.
23C
[bar]
2,4
1,4
0,9
1
0,8
0,8
1
0,8
0,8
vacuum
[mm Hg]
759
759
759
759
508
381
759
508
508
standard
length
[m]
15
15
15
15
15
15
15
15
15

PHARMED
Brittle temp.:
-40C
Hardness:
64 Shore (A)
Density:
1,98 g/cm3
Length:
7,5 m
Characteristics:
Beige, flexible hose designed for application in peristaltic pumps. It is used in medical and
pharmaceutical industry to transport biocompatible media. Manufactured in accordance with
the requirements of ISO 10993 standard for full biological safety. The hose can be exposed to
gamma radiation (cobalt 60) up to 5 Mrd (Megarad) with minimal effect on its physical properties.
Complies with FDA, NSF and USP Class VI standards.
code
I.D.
[mm]
O.D.
[mm]
VE-R650E-26BPT
VE-R6501-26BPT
VE-R6502-16BPT
VE-R6502-26BPT
VE-R6503-26BPT
VE-R6504-16BPT
VE-R6504-26BPT
VE-R6506-26BPT
VE-R6508-26BPT
VE-R6508-46BPT
VE-R6510-26BPT
VE-R6512-26BPT
VE-R6512-46BPT
VE-R6516-46BPT
VE-R6520-46BPT
VE-R6524-46BPT
0,5
0,8
1,6
1,6
2,4
3,2
3,2
4,8
6,4
6,4
8
9,5
9,5
12,7
15,9
19
3,7
4
3,2
4,8
5,6
4,8
6,4
8
9,5
12,7
11,2
12,7
15,9
19,1
22,2
25,4
wall
thickness
[mm]
1,6
1,6
0,8
1,6
1,6
0,8
1,6
1,6
1,6
3,2
1,6
1,6
3,2
3,2
3,2
3,2
min. bending
radius
[mm]
3
3
6
3
6
12
12
16
22
19
35
34
29
29
70
89
working press.
23C / 83C
[bar]
7,93 / 4,94
5,37 / 3,37
1,65 / 0,96
2,96 / 1,86
2,06 / 1,31
0,89 / 0,55
1,65 / 1,03
1,17 / 0,68
0,89 / 0,55
1,65 / 1,03
0,75 / 0,41
0,62 / 0,34
1,17 / 0,68
0,68 / 0,55
0,75 / 0,41
0,62 / 0,34
vacuum
23C
[mm Hg]
759
759
759
759
759
635
759
759
635
759
381
254
759
635
381
254
NITRILE TUBING
Material:
Working temp.:
Brittle temp.:
Hardness:
Density:
Characteristics:
Black NBR rubber

+100C
-20C
65 Shore (A)
1,45 g/cm3
Lightweight, flexible hose with a superb resistance to aliphatic based hydrocarbon fluids, good
resistance to aromatic solvents and alcohols. Low gas permeability. For application in fuel,
gas and lubricant lines as well as for petrochemical product transfer. Average resistance to
ageing and light.
code
I.D.
[mm]
O.D.
[mm]
VE-730020
VE-730080
VE-730100
VE-730110
VE-730160
VE-730200
VE-730220
VE-730240
4
5
6
6
7
8
10
12
7
8
9
10
10
12
14
17
wall
thickness
[mm]
1,5
1,5
1,5
2
1,5
2
2
2,5
min. bending
radius
[mm]
11
21
28
20
34
33
53
68
working
pressure
[bar]
1,06
0,96
0,75
0,90
0,65
0,75
0,72
0,54
standard
length
[m]
50
50
50
50
50
50
50
50
251
GSR TUBING
Material:
Natural rubber
ethylene oxide)
Brittle temp.:
-40C
Hardness:
45 Shore (A)
Density:
1,13 g/cm3
Characteristics:
252
Lightweight, extremely flexible hose that can handle many industrial applications due to its high
resistance to abrasion and low gas permeability. GSR SEMI-VACUUM and GSR VACUUM are
designed for vacuum applications.
code
I.D.
[mm]
VE-710047
VE-710050
VE-710054
VE-710056
VE-710058
VE-710060
VE-710063
VE-710070
VE-710078
VE-710082
VE-710095
VE-710098
VE-710107
VE-710115
VE-710117
VE-710127
VE-710128
VE-710140
1
2
3
3
4
4
4
5
6
6
7
7
8
9
10
12
12
16
VE-710064
VE-710072
VE-710084
VE-710089
VE-710100
VE-710101
VE-710109
VE-710110
VE-710120
VE-710130
VE-710135
4
5
6
6
7
7
8
8
10
12
15
VE-710066
VE-710074
VE-710091
VE-710114
VE-710123
VE-710139
VE-710151
4
5
6
8
10
15
20
wall
thickness
[mm]
GSR STANDARD
3
1
4
1
5
1
6
1,5
6
1
7
1,5
8
2
8
1,5
9
1,5
10
2
10
1,5
11
2
12
2
13
2
14
2
17
2,5
18
3
22
3
GSR SEMI-VACUUM
9
2,5
10
2,5
12
3
16
5
15
4
17
5
14
3
18
5
20
5
24
6
30
7,5
GSR VACUUM
14
5
15
5
18
6
20
6
30
10
35
10
45
12,5
O.D.
[mm]
min. bending
radius
[mm]
working
pressure
[bar]
standard
length
[m]
3
6
12
13
12
12
18
20
33
18
33
37
32
58
46
63
42
90
0,82
0,50
0,46
0,64
0,36
0,54
0,51
0,46
0,37
0,45
0,31
0,27
0,37
0,36
0,37
0,28
0,31
0,31
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
17
17
16
19
15
12
25
15
21
23
36
0,63
0,61
0,62
1,05
0,65
0,88
0,51
0,53
0,65
0,72
0,65
25
25
25
25
25
25
25
25
25
25
10
9
7
9
12
18
28
63
1,03
0,95
1,12
0,82
0,67
0,63
0,61
25
25
25
25
10
10
10
GA TUBING
Material:
Light brown, natural rubber
ethylene oxide)
Brittle temp.:
-40C
Hardness:
40 Shore (A)
Density:
0,98 g/cm3
Characteristics:
Lightweight, flexible hose whose properties are similar to latex rubber and so can be used as
its alternative. Easy to assemble. Used in laboratories, for blood or tissue evaluation, and to
transport cleaning agents. Excellent elongation up to 500%. Resistant to abrasion. Complies
with FDA.
code
I.D.
[mm]
O.D.
[mm]
VE-702030
VE-702075
VE-702195
VE-702210
VE-702225
VE-702315
VE-702330
VE-702345
VE-702405
VE-702420
VE-702465
VE-702480
VE-702495
VE-702525
VE-702555
VE-702585
VE-702600
VE-702615
VE-702630
VE-702645
VE-702660
2
3
4
4
4
5
5
5
6
6
7
7
7
8
8
10
10
12
15
18
20
4
5
6
7
8
8
9
10
9
10
10
11
13
12
16
14
15
17
21
24
27
wall
thickness
[mm]
1
1
1
1,5
2
1,5
2
2,5
1,5
2
1,5
2
3
2
4
2
2,5
2,5
3
3
3,5
min. bending
radius
[mm]
7
11
12
12
7
18
14
13
29
19
37
26
20
28
17
50
40
52
70
99
99
working
pressure
[bar]
0,50
0,46
0,36
0,54
0,51
0,46
0,61
0,63
0,37
0,45
0,31
0,27
0,75
0,37
0,61
0,37
0,34
0,28
0,33
0,32
0,24
standard
length
[m]
50
50
50
50
50
50
50
50
50
50
25
25
25
25
25
25
25
25
25
25
25
253
ACUTECH PEEK
Material:
PEEK (polyetheretherketone)
Hardness:
75 Shore (A)
Density:
1,31 g/cm3
Characteristics:
Brown, lightweight hose with excellent resistance to aggressive chemicals. Smooth internal
layer helps to prevent impurities build-up. Suitable for high pressure applications, including
chromatography. More resistant to corrosion than stainless steel. Resistant to abrasion and
washing out. The hose can be used to transfer steam. Working pressure of the hose is limited
only by the working pressure of the fitting that is used. Complies with FDA and USP Class VI.
code
I.D.
[mm]
tolerance
[+/- mm]
O.D.
[mm]
tolerance
[+/- mm]
standard
length
[m]
VE-ACUPEEK-015
VE-ACUPEEK-025
VE-ACUPEEK-050
VE-ACUPEEK-076
VE-ACUPEEK-102
VE-ACUPEEK-160
VE-ACUPEEK-203
0,15
0,25
0,5
0,76
1,02
1,6
2,03
0,04
0,05
0,05
0,05
0,05
0,10
0,10
1,6
1,6
1,6
1,6
1,6
3,2
3,2
0,08
0,08
0,08
0,08
0,08
0,10
0,10
76
76
76
76
76
76
76
Silicone and TYGON hoses are also available as hose assemblies with fittings
according to customer specifications.
254
INDUSTRIAL HOSES - technical gas
ACETYLEN EN 559
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth SBR/NR compound

Two textile braids
Red, ribbed SBR/NR compound
From -30C to +70C
Characteristics: Flexible welding hose for acetylene. Resistant to weather conditions and kinking. Manufactured
according to EN 559 standard. Not suitable for fuel-based and oil-based gases or LPG.
code
I.D.
[mm]
O.D.
[mm]
PR-ACETYLEN/559-05
PR-ACETYLEN/559-06
PR-ACETYLEN/559-08
PR-ACETYLEN/559-09
PR-ACETYLEN/559-10
PR-ACETYLEN/559-13
PR-ACETYLEN/559-16
PR-ACETYLEN/559-19
PR-ACETYLEN/559-25
5
6,3
8
9
10
13
16
19
25
11
13,3
16
16
18
23
26
31
36
working
pressure
[bar]
20
20
20
20
20
20
20
20
20
bending
radius
[mm]
50
63
80
90
100
130
160
190
250
weight
[kg/m]
0,13
0,15
0,18
0,19
0,21
0,42
0,51
0,68
0,82
standard
length
[m]
50
50
50
50
50
50
50
50
50
TWIN
Internal layer:
External layer: Smooth synthetic rubber
- red (for acetylene)
- blue (for oxygen)
Characteristics: Twin welding hose according EN 559 standards.
code
BG-3260005005
BG-3261006006
BG-3260006006
BG-3260008008
BG-3261006009
BG-3260006009
BG-3260009009
I.D.
[mm]
5
5
6
6
6
6
8
8
6
9
6
9
9
9
wall
thickness
[mm]
2,75
2,75
3,5
3,5
3,5
3,5
3,5
3,5
5
3,5
5
3,5
3,5
3,5
colour
blue
red
blue
red
blue
red
blue
red
blue
red
blue
red
blue
red
working
pressure
[bar]
bursting
pressure
[bar]
standard
length
[m]
20
60
50
20
60
40
20
60
50
20
60
50
20
60
40
20
60
50
20
60
50
255
OXYGEN EN 559
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black, smooth SBR/NR rubber

Two textile braids
Blue, ribbed SBR/NR rubber
From -30C to +70C
Characteristics: Flexible welding hose for oxygen. Resistant to weather conditions and kinking. Manufactured
according to EN 559 standard. Not suitable for fuel-based and oil-based gases or LPG.
code
I.D.
[mm]
O.D.
[mm]
PR-OXYGEN/559-05
PR-OXYGEN/559-06
PR-OXYGEN/559-08
PR-OXYGEN/559-09
PR-OXYGEN/559-10
PR-OXYGEN/559-13
PR-OXYGEN/559-16
PR-OXYGEN/559-19
PR-OXYGEN/559-25
5
6,3
8
9
10
13
16
19
25
11
13,3
16
16
18
23
26
31
36
working
pressure
[bar]
20
20
20
20
20
20
20
20
20
bending
radius
[mm]
50
63
80
90
100
130
160
190
250
weight
[kg/m]
0,13
0,15
0,18
0,19
0,21
0,42
0,51
0,68
0,87
standard
length
[m]
50
50
50
50
50
50
50
50
50
OXYGEN / FV
Internal layer:
Reinforcement:
External layer:
Working temp.:

Textile cord, fiberglass reinforcement
Yellow or blue CR rubber
From -20C to +70C
Characteristics: Hose designed for oxygen blowing lances used in metallurgical industry.
code
I.D.
[mm]
O.D.
[mm]
IV-OXYGEN/FV-13
IV-OXYGEN/FV-16
IV-OXYGEN/FV-19
IV-OXYGEN/FV-25
IV-OXYGEN/FV-32
IV-OXYGEN/FV-38
IV-OXYGEN/FV-51
13
16
19
25
32
38
51
27
30
33
41
50
57
70
Code example:
- hose with yellow external layer:
- hose with blue external layer:
256
IV-OXYGEN/FV-13Y
IV-OXYGEN/FV-13BL
working
pressure
[bar]
30
30
30
30
30
30
30
bursting
pressure
[bar]
120
120
120
120
120
120
120
standard
length
[m]
120
120
120
120
120
120
120
GWPB
Internal layer:
Reinforcement:
External layer:
Working temp.:

Two textile cords
Orange, smooth EPDM/SBR rubber
From -30C to +70C
Characteristics: Flexible hose for liquefied petroleum gas (LPG) and natural gas. Fulfils EN 559 standards.
code
I.D.
[mm]
O.D.
[mm]
SP-GWPB-04
SP-GWPB-05
SP-GWPB-06
SP-GWPB-08
SP-GWPB-09
SP-GWPB-10
SP-GWPB-12
SP-GWPB-16
SP-GWPB-19
SP-GWPB-20
SP-GWPB-25
SP-GWPB-32
SP-GWPB-35
SP-GWPB-38
SP-GWPB-40
SP-GWPB-45
SP-GWPB-50
4
5
6,3
8
9
10
12,5
16
19
20
25
31,5
35
38
40
45
50
11
12
13,3
15
16
17
19,5
23,4
29,6
30,6
35,6
44,1
48,2
51,4
53,4
58,6
63,6
working
pressure
[bar]
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
20
bursting
pressure
[bar]
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
60
bending
radius
[mm]
30
40
50
60
70
75
95
120
140
150
190
240
260
280
300
340
375
weight
[kg/m]
0,12
0,14
0,16
0,18
0,19
0,20
0,25
0,31
0,55
0,58
0,69
1,12
1,28
1,40
1,46
1,64
1,80
standard
length
[m]
50
50
50
50
50
50
50
50
40
40
40
40
20
20
20
20
20
GPL CORD EN 1762:2003

Internal layer:
External layer: Black, smooth, pin pricked
synthetic rubber
Characteristics: Flexible delivery hose designed to transfer liquefied petroleum gas - LPG (liquid and gas state)
and natural gas. External layer resistant to ozone and weather conditions.
Antistatic (R<106 /m). The hose features copper wires to ensure electrical conductivity.
Manufactured according to EN 1762:2003/D standard.
code
I.D.
[mm]
O.D.
[mm]
IV-GPL/CORD/M-013
IV-GPL/CORD/M-016
IV-GPL/CORD/M-019
IV-GPL/CORD/M-025
IV-GPL/CORD/M-032
IV-GPL/CORD/M-038
IV-GPL/CORD/M-045
IV-GPL/CORD/M-050
IV-GPL/CORD/M-065
IV-GPL/CORD/M-075
IV-GPL/CORD/M-100
13
16
19
25
32
38
45
50
65
75
102
24
29
32
38
46
54
62
67
83
93
124
working
pressure
[bar]
25
25
25
25
25
25
25
25
25
25
25
bursting
pressure
[bar]
100
100
100
100
100
100
100
100
100
100
100
bending
radius
[mm]
100
125
160
200
250
320
400
400
550
650
800
weight
[kg/m]
0,39
0,48
0,55
0,77
1,04
1,32
1,61
1,76
2,44
2,76
-
standard
length
[m]
60
60
60
60
60
60
60
60
60
60
60
257

Hoses for high pressure gases
High pressure gases are transferred under pressure above 140 bar and therefore demand special types of flexible
hoses. The most common applications of such usage are: filling up and emptying of gas tanks and cylinders,
industrial installations, medical and laboratory installations. Typical gases used are: oxygen, nitrogen, hydrogen,
helium, argon, carbon dioxide, acetylene and many other gases, including mixtures.
Hoses used for high pressure gas transfer:
- rubber hydraulic hoses,
- thermoplastic hoses,
- PTFE hoses,
- steel hoses,
- UHP SPIRSTAR hoses.
Before choosing a hose for high pressure gas transfer application, we need to consider the following issues:
Permeation through the hose wall
High pressure gases exhibit a tendency to permeate - to pass through the hose walls. A phenomenon of gas
permeation is highly complex and depends on such factors as: medium and its molecular structure, velocity and a
type of flow (laminar or turbulent), temperature, thickness of a hose wall, its material and structure; particularly the
degree of porosity of a hose material. In order to measure the precise rate of permeation, test procedures must
be carried out under the actual or simulated working conditions.
The rate of permeation is higher when the particles of gases are small (helium, hydrogen) and when the hose wall
is thin and with porosity. For those reasons:
- an external layer of rubber or thermoplastic hoses used for gases should be pin pricked to avoid accumulation
of gas under the external layer,
- special PTFE hoses should be used for high pressure gases (HPG). Their permeability is lower because PTFE
is processed in a special way,
- when dangerous gases are conveyed, consideration should be given to the issue of gas accumulation in a
confined area around the hose,
- some gases or by-products of their reaction with e.g. moisture can damage the braid of the hose, its fittings or
other parts of equipment.
Working pressure
According to ISO7751 standard a safety factor (ratio of working pressure to burst pressure) for gases should be
1:4. Testing pressure should twice as high as the working pressure.
Working temperature
Gas expansion often causes a sudden temperature drop beyond regular working conditions. Take that process
into account when choosing the material of the hose and fittings. It is generally recommended to use stainless
steel fittings and brass nuts.
Cleanliness and degreasing
If a hose is used for oxygen, its cleanliness and degreasing becomes crucial to avoid fire or explosion. Hose
assemblies for oxygen must be degreased using special procedure.
258

Electrostatic properties
Pure, single phase gases (gas without droplets of fluid or solid contaminants) usually do not require special, antistatic
PTFE or thermoplastic material. Multiphase media (gas with fluid or solid contaminants) must not be transferred
by PTFE or thermoplastic hoses because of a risk of electrostatic charges. Antistatic PTFE (with carbon additives)
is not suitable for high pressure gases due to increased micro porosity of this material.
Flow velocity and pressure pulsation
Appropriate construction of an installation should eliminate pressure pulsation. If a rise of pressure caused by
pulsation occurs it must not exceed maximum working pressure. Flow velocity in corrugated steel hose assemblies
should not exceed 30 m/s - a turbulent flow can cause vibrations and damage the hose.
Safety warning
High dynamics of a gas expansion process may contribute to a crack or tearing of a hose fitting. It causes potential
risk of damage and harm to people, equipment and installation. To prevent such danger it is recommended to use
e.g. steel wires fitted to the hose as a safety measure.
Thermoplastic hoses for high pressure gases
The external layer of thermoplastic hoses must be pin-pricked (see chapter: HIGH PRESSURE, section thermoplastic hoses). Confirm the medium being transferred to application. Use 1:4 safety factor.
SPIR STAR hoses for high pressure gases
The external layer of SPIR STAR hoses must be pin-pricked (see chapter: UHP - ULTRA HIGH PRESSURE,
section - SPIR STAR hoses). Confirm the medium being transferred to application. Use 1:6 safety factor.
259

PTFE hoses for high pressure gases
HWDB / HPG
Material:
Smooth PTFE
Reinforcement: Double AISI 304 steel wire braid
Characteristics: SMOOTHBORE PTFE hose version. A heavy wall made of the uniquely processed PTFE
(reduced micro porosity) and a double steel wire braid of the hose make it suitable for high
pressure gas applications.
tables by o 0,75% for each 1C of temperature rise above +130C.
Example: at +170C maximum working pressure for AF-HWDB/HPG-06 hose:

225 bar - (170C - 130C) x 0,75 = 225 bar - 30% = 157,5 bar.
Assembly:
Use fittings and ferrules from AF-TL series
code
DN
I.D.
[mm]
O.D.
[mm]
AF-HWDB/HPG-06
AF-HWDB/HPG-08
AF-HWDB/HPG-10
6
8
10
6 6,5
7,5 8
9,1 9,6
10,6 10,9
12,1 12,6
13,9 14,3
working
pressure
[bar]
225
217
180
bursting
pressure
[bar]
900
870
720
bending
radius
[mm]
26
35
50
weight
[kg/m]
0,18
0,21
0,24
HWDB / HPG / HI
Material:
Reinforcement:
External layer:
Working temp.:
Smooth PTFE
Aramid braid + 304 steel wire braid
Micro perforated Hytrel
From -50C to +70C
Characteristics: Special version of SMOOTHBORE PTFE hose designed for high pressure applications. A heavy
wall made from the uniquely PTFE (reduced micro porosity), a double braid (aramid and steel
braid) and an external Hytrel layer make it suitable for high pressure gas applications. The external
Hytrel layer is available in several colour versions (black, red, green, blue) to distinguish hoses
used for different types of gases.
Assembly:
Use fittings and ferrules from AF-TL series.
code
DN
I.D.
[mm]
O.D.
[mm]
AF-HWDB/HPG/HI-06
6 6,3
12 12,4
260
working
pressure
[bar]
300
bursting
pressure
[bar]
1200
bending
radius
[mm]
30
weight
[kg/m]
0,19

Steel hoses for high pressure gases
HP / THP / 300
Internal layer:
Corrugated AISI316L steel hose
Reinforcement: Single (HP) or double (THP, THP300)
AISI 304 steel braid
Characteristics: Special, high pressure steel hose meets the requirements of EN ISO 10380 class 1 standard.
This heavy wall hose is manufactured using hyrdoforming technology to achieve parallel, close
pitch construction. Available with fittings for steel hoses on request. If used at high temperatures,
working pressure given in the tables must be reduced by temperature correction factor according
to EN ISO 10380 standard. Wersja THP300 do przetaczania gazu z butli, kwalifikowana przez
CTE Air Liquide do cinienia 250 bar. Safety factor (working / burst pressure) 1:4.
HP (single braid)
code
I.D.
[mm]
O.D.
[mm]
TB-HP-006
TB-HP-010
TB-HP-012
6
10
12
11,4
17,8
20,2
code
I.D.
[mm]
O.D.
[mm]
TB-THP-006
TB-THP-010
TB-THP-012
6
10
12
13
19,4
21,8
code
I.D.
[mm]
O.D.
[mm]
TB-THP300-006
6,2
13,3
working
pressure
[bar]
180
145
140
bursting
pressure
[bar]
720
580
560
min. bending radius

[mm]
static
dynamic
25
110
38
150
45
165
working
pressure
[bar]
255
195
185
bursting
pressure
[bar]
1020
780
740
min. bending radius

[mm]
static
dynamic
25
110
38
150
45
165
working
pressure
[bar]
300
bursting
pressure
[bar]
1200
min. bending radius

[mm]
static
dynamic
25
140
THP (double braid)
THP300 (double braid)
261

Fittings for high pressure gas hoses
High pressure gas hoses can be used with many types of fittings in different shapes. Most of those fittings is adjusted to
be connected to the valves of gas cylinders. The types of couplings of gas cylinder valves are listed in PN-81/M-69229
and DIN477-1. The standards specify the types of couplings (sizes, threads) and indicate the application with the
particular type of gas. The size and shape of a tail end fitting depends on the size and type of the hose (rubber hydraulic,
thermoplastic, PTFE, steel, SPIR STAR). Material of the fittings must be resistant to the corrosive effect of gases,
while some other materials must not be used (e.g. copper and copper alloys for acetylene and ammonia). Usually a
fitting made of 304 stainless steel with a brass nut are applicable.
Other types of couplings according to the customers specification or standards are also available e.g. elbows, but
also those made of other materials e.g. zinc plated carbon steel, 316 stainless steel.
TI-ZBW170
TI-ZWW170
AF-TLBW170
AF-TLWW170
TB-SBW170
TB-SWW170
code
DN6 (1/4)
DN8 (5/16)
DN10 (3/8)
DN12 (1/2)
type of the hose
Fitting with G-3/4 (3/4 BSP) female thread, connection according PN-81/M-69229 (DIN477-1 no 9)
material: fitting - AISI 304, nut - brass; application: oxygen, carbogen.
TI-ZBW170-12-04SS/MO
thermoplastic
rubber hydraulic
AF-TLBW170-12-04SS/MO
TB-SBW170-12-04SS/MO
-
PTFE HPG
steel
Fitting with Whitworth W21,8 x 1/14 female thread, connection according PN-81/M-69229 (DIN477-1 no 6)
material: fitting- AISI 304, nut - brass; application: ammonia, argon, carbon dioxide, helium and more.
TI-ZWW170-21-04SS/MO
thermoplastic
rubber hydraulic
AF-TLWW170-21-04SS/MO
TB-SWW170-21-04SS/MO
-
PTFE HPG
steel
Fitting with Whitworth W21,8 x 1/14 L (LEFT) female thread, connection according PN-81/M-69229 (DIN477-1 no 1)
material: fitting - AISI 304, nut - brass; application: hydrogen, methane, other flammable gases.
TI-ZWW170-21L-04SS/MO
thermoplastic
rubber hydraulic
AF-TLWW170-21L-04SS/MO AF-TLWW170-21L-05SS/MO AF-TLWW170-21L-06SS/MO

TB-SWW170-21L-04SS/MO
TB-SWW170-21L-06SS/MO TB-SWW170-21L-08SS/MO
PTFE HPG
steel
Fitting with Whitworth W24,32 x 1/14 female thread, connection according PN-81/M-69229 (DIN477-1 no 10)
material: fitting - AISI 304, nut - brass; application - nitrogen.
thermoplastic
rubber hydraulic
-
PTFE HPG
steel
262
INDUSTRIAL HOSES - air conditioning

General information about refrigerants
Refrigerant is a substance engaged in a process of heat exchange in refrigeration systems. The refrigerant absorbs
heat by evaporation at low temperature and low pressure, then it gives up heat when vapour is condensed at the
respectively higher temperature and pressure. A refrigerant can be made of a single substance or a combination
of two or more substances.
There are numerous substances that can be employed as refrigerants: natural substances (ammonia, water, carbon
dioxide), flammable gases and their mixtures (propane, butane) and synthetic media - hydrocarbons, where atoms
of hydrogen were substituted by chlorine, fluoride or bromine obtaining non-flammable, low-boiling substances
commonly known as Freons. Refrigerants are usually defined with a number preceded by a letter R: R12, R22,
R134a.
Due to environmental concerns (ozone depletion) the application of some refrigerants is limited and prohibited of
the others - in new or refilled equipment (e.g. R12, R22, R502).
R12
R22, R502

R134a
- formerly the most popular refrigerant, used in household refrigerators, replaced with R134a.
- used in large refrigerating equipment, now being replaced with recently designed blends such as
R402A, R404A, R407,R507.
- the most common refrigerant at the moment, especially in car air conditioning.
A refrigerant is usually called with the brand name of its manufacturer e.g.: Suva HP62, Suva MP52, Forane134a,
Reclin 404A etc.
Apart from refrigerants, there are lubricants also used in installations. The impact of lubricants on the material of hoses
and sealing have to be taken into account. Common lubricants: mineral oils, ester oil, polyalkylene glycol (PAG).
FR 5
Internal layer:
Polyamide compound
Reinforcement: Polyester cord
External layer: Pin-pricked polyurethane,
(for water and air up to +65C)
Characteristics: Lightweight, flexible hose for commercial refrigeration systems and air-conditioning (in particular
for Freon R 22, R 134a, R 404, R 410). Not suitable for automotive air-conditioning systems
and heat pumps.
Assembly:
Use Z type fittings (IT-46).
code
I.D.
[mm]
O.D.
[mm]
ZC-FR5-TEST
ZC-FR5-04
ZC-FR5-05
ZC-FR5-06
ZC-FR5-08
ZC-FR5-10
ZC-FR5-13
ZC-FR5-16
ZC-FR5-19
ZC-FR5-25
2,1
4
4,8
6,4
8,1
9,7
12,9
16
19,2
25,4
6
8,2
10,1
11,8
14,2
15,6
19,3
22,3
25,3
32,3
working
pressure
[bar]
40
40
40
40
40
40
40
40
40
40
bursting
pressure
[bar]
160
160
160
160
160
160
160
160
160
160
bending
radius
[mm]
20
45
50
75
89
100
125
165
250
300
weight
[kg/100 m]
2,80
4,30
6,90
8,60
12,00
13,40
18,00
20,90
25,70
34,40
263
3055, 3060
Synthetic rubber (CR), nylon layer (PA),
synthetic rubber (NBR)
Reinforcement: Double textile cord (3060 - single)
External layer: Pin-pricked synthetic rubber
(3055 - EPDM, 3060 - IIR)
Internal layer:
Characteristics: The top grade hose designed for automotive and commercial refrigeration systems, airconditioning systems operating with the use of Freon R 12, R 134a, Suva MP 52, R 22, and
such lubricants as mineral oils, esters, PAG. External layer resistant to oil, abrasion and weather
conditions. The hose type 3060 has an extremely small external diameter that provides increased
flexibility and lower weight (LW).
Standards:
3055 - SAE J51b AII/SAE J2064, 3060 - GM:SD2-254, FORD: WHSM 96D25, CHRYSLER:PF6318.
Assembly:
Use fittings for air-conditioning - BU (IT-43, IT-44, IT-73).
typ
3055
3060 (LW)
code
I.D.
[inch]
I.D.
[mm]
O.D.
[mm]
BU-3055-08
BU-3055-10
BU-3055-13
BU-3055-16
BU-3060-08
BU-3060-10
BU-3060-13
BU-3060-16
5/16
13/32
1/2
5/8
5/16
13/32
1/2
5/8
7,9
10,3
12,7
15,9
7,9 8,6
10,2 11,2
12,5 13,5
15,6 16,6
18,3
22,4
24,6
27,7
14,2 15,2
16,8 17,8
18,9 19,9
23,1 24,1
working
pressure
[bar]
24
24
24
17
34,5
34,5
34,5
34,5
bursting
pressure
[bar]
121
121
121
86
172
172
121
121
bending
radius
[mm]
102
114
127
165
51
64
76
102
3056
Internal layer:
Reinforcement:
External layer:
Working temp.:
Synthetic rubber IIR (CR for 3/16)

Single steel cord
Pin-pricked synthetic rubber (CSM)
From -40C to +125C
Characteristics: The top grade hose designed for automotive (especially trucks and buses) and commercial
refrigeration systems, air-conditioning systems operating with the use of Freon R134a and such
lubricants as mineral oils, esters, PAG. External layer resistant to oil, abrasion and weather
conditions.
Standards:
SAE J2064 type B (SAE 100R5 dimensions).
Assembly:
Use fittings for air-conditioning - BU.
264
code
I.D.
[inch]
I.D.
[mm]
O.D.
[mm]
BU-3056-05
BU-3056-22
BU-3056-28
3/16
7/8
1.1/8
4,8
22,2
28,6
13,1
31,4
38,1
working
pressure
[bar]
35
35
35
bursting
pressure
[bar]
137
137
137
bending
radius
[mm]
85
155
190
3090
Synthetic rubber (CR)
with a nylon (PA) interlayer
Reinforcement: Single textile cord
External layer: Pin-pricked synthetic rubber (CIIR)
Internal layer:
Characteristics: The top grade hose designed for automotive and commercial refrigeration systems, airconditioning systems operating with the use of R134a (also R12, Suva MP52, R22, HFO1234yf)
and such lubricants as mineral oils, esters, PAG. External layer resistant to, abrasion and
weather conditions.
Assembly:
Use fittings for air-conditioning BU-54... (BURGACLIP system, IT-73) or BU-53... (IT-43, IT-44).
code
I.D.
[inch]
I.D.
[mm]
O.D.
[mm]
BU-3090-08
BU-3090-10
BU-3090-13
BU-3090-16
BU-3090-19
BU-3090-22
5/16
13/32
1/2
5/8
3/4
7/8
7,98,6
10,211,2
12,513,5
15,616,6
18,919,9
22
14,215,2
16,817,8
18,919,9
23,124,1
28,129,1
31
working
pressure
[bar]
35
35
35
35
35
35
bursting
pressure
[bar]
172
172
121
121
121
121
bending
radius
[mm]
51
64
76
102
250
-
Air-conditioning fittings assembly

Thermoplastic hoses designed for air-conditioning applications (e.g. FR5) are usually used with standard hydraulic
fittings (Z type) and matching crimp ferrules.
Rubber hoses designed for air-conditioning require specially designed fittings in aluminium or steel: reusable, crimp
or for assembly with the use of special clips (fast assembly system).
Reusable fittings
Assembly of a fitting is performed by screwing the fitting
together with a ferrule that was fitted on the hose. An
advantage of this solution is a lack of need to use tools useful in the field conditions.
Fast assembly system
Special design of a fitting tail and a clip enables fast and
easy assembly using only assembly pliers.
Crimp fittings
A crimp fitting for air-conditioning has an integrated ferrule.
The crimping process is performed by crimping pliers,
crimping machines designed for air-conditioning or by
standard FINN-POWER crimping machines (with special
die sets).
Hose assembly repair
If a hose assembly failed but its fittings are not damaged,
it can be easily repaired by brazing the fittings to nipples
and assembling then once again on the new hose.
265

BURGACLIP fast assembly system
The system enables fast and easy assembly of air-conditioning fittings with the use of special clamps that are
tightened with assembly pliers. Special design of a tail combined with a top grade hose ensures excellent quality
of the hose assembly - very low Freon permeability.
We provide a range of fittings for fast assembly system (designed for 3090 hose in particular).
Assembly pliers
Special clip pliers designed to assemble clips of the
air-conditioning fittings - BURGACLIP.
EC-294050
Tool case
The case includes a full set of tools necessary to
assemble an air-conditioning hose and fittings of
BURGACLIP system.
The case contains:
- special clip pliers designed to assemble clips of
the air-conditioning fittings - BURGACLIP,
- hose cutter for hose of BU-3090 type in DN 8, 10,
12, 16 dimension,
- dual range hose cutter for hoses with an outside
diameter up to 42 mm.
BU-CASE-1
Service case
The case contains a set of various (most often used)
BURGACLIP fittings for BU-3090 hose type in DN 8,
10, 12 and 16.
The case contains:
- 80 BURGACLIP clips,
- 40 BURGACLIP clip holders,
- 39 BURGACLIP fittings (straight, elbow, UNF
thread, for compressors, type: SAE, ORFS),
- 80 HNBR orings.
BU-CASE-2
266

Fittings for air-conditioning rubber hoses - BURGACLIP
BURGACLIP - assembly elements
8769
fitting
connection
size
-6
-8
- 10
-12
-14
-16
hose I.D.
[inch]
5/16
13/32
1/2
5/8
3/4
7/8
8768
clip holder (plastic)
clip (stainless steel)
code
BU-8769-06
BU-8769-08
BU-8769-10
BU-8769-12
BU-8769-14
BU-8769-16
code
BU-8768-06
BU-8768-08
BU-8768-10
BU-8768-12
BU-8768-14
BU-8768-16
BURGACLIP - braze nipples
54743
fitting
connection
size
-6
-6
-8
-8
- 10
-10
- 12
-12
-16
hose
dash
-6
-8
-8
- 10
- 10
-12
-12
-14
-16
connection
size
[inch]
3/8
3/8
1/2
1/2
5/8
5/8
3/4
3/4
1
hose I.D.
[inch]
code
5/16
13/32
13/32
1/2
1/2
5/8
5/8
3/4
7/8
BU-54743-06-06S
BU-54743-06-08S
BU-54743-08-08S
BU-54743-08-10S
BU-54743-10-10S
BU-54743-10-12S
BU-54743-12-12S
BU-54743-12-14S
BU-54743-16-16S
BURGACLIP - connectors
548753
548751
hose
dash
hose I.D.
[inch]
valve size
[mm]
-6
-8
- 10
-12
5/16
13/32
1/2
5/8
16
16
13
13
connector
code
BU-548753-06-06S
BU-548753-08-08S
BU-548753-10-10S
BU-548753-12-12S
548749
connector with
R134 valve
code
BU-548751-06-06S
BU-548751-08-08S
BU-548751-10-10S
BU-548751-12-12S
90 connector
code
BU-548749-06-06S
BU-548749-08-08S
BU-548749-10-10S
BU-548749-12-12S
267

BURGACLIP - tube connection fitting with UNF female thread
54771
54705
54704
fitting
connection
size
-5
-6
-6
-8
-8
-8
-10
- 10
- 10
- 10
- 12
- 12
-12
-12
hose
dash
thread
[inch]
hose I.D.
[inch]
-6
-6
-8
-6
-8
- 10
-6
-8
- 10
- 12
- 10
-12
-14
-16
9/16-18
5/8-18
5/8-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
7/8-14
7/8-14
1.1/16-14
1.1/16-14
1.1/16-14
1.1/16-14
5/16
5/16
13/32
5/16
13/32
1/2
5/16
13/32
1/2
5/8
1/2
5/8
3/4
7/8
54706
straight
45
90
180
code
code
code
code
BU-54704-05-06S
BU-54704-06-06S
BU-54704-06-08S
BU-54704-08-06S
BU-54704-08-08S
BU-54704-08-10S
BU-54704-10-06S
BU-54704-10-08S
BU-54704-10-10S
BU-54704-10-12S
BU-54704-12-10S
BU-54704-12-12S
BU-54704-12-16S
BU-54705-05-06S
BU-54705-06-06S
BU-54705-08-06S
BU-54705-08-08S
BU-54705-08-10S
BU-54705-10-10S
BU-54705-10-12S
BU-54705-12-10S
BU-54705-12-12S
BU-54705-12-14S
BU-54705-12-16S
BU-54706-05-06S
BU-54706-06-06S
BU-54706-06-08S
BU-54706-08-06S
BU-54706-08-08S
BU-54706-08-10S
BU-54706-10-06S
BU-54706-10-08S
BU-54706-10-10S
BU-54706-10-12S
BU-54706-12-10S
BU-54706-12-12S
BU-54706-12-16S
BU-54771-06-06S
BU-54771-08-08S
BU-54771-10-10S
BU-54771-12-12S
BU-54771-12-14S
BU-54771-12-16S
BURGACLIP - compressor fitting with UNF female thread
54707
fitting
connection
size
- 10
- 10
- 10
54708
hose
dash
thread
[inch]
hose I.D.
[inch]
-8
- 10
- 12
1-14
1-14
1-14
13/32
1/2
5/8
54709
straight
45
90
code
code
code
BU-54707-10-08S
BU-54707-10-10S
BU-54707-10-12S
BU-54708-10-08S
BU-54708-10-10S
BU-54708-10-12S
BU-54709-10-08S
BU-54709-10-10S
BU-54709-10-12S
BURGACLIP compressor fitting with UNF female thread and R134 valve
54733
fitting
connection
size
- 10
- 10
- 10
268
54734
hose
dash
thread
[inch]
hose I.D.
[inch]
valve
size
-8
- 10
- 12
1-14
1-14
1-14
13/32
1/2
5/8
16
13
13
54735
straight
45
90
code
code
code
BU-54733-10-08S
BU-54733-10-10S
BU-54733-10-12S
BU-54734-10-08S
BU-54734-10-10S
BU-54734-10-12S
BU-54735-10-08S
BU-54735-10-10S
BU-54735-10-12S

BURGACLIP - tees
548750
hose
dash 1
-6
-8
-8
- 10
- 10
- 10
- 12
- 12
-12
hose I.D.
1
[inch]
5/16
13/32
13/32
1/2
1/2
1/2
5/8
5/8
5/8
hose
dash 2
-6
-6
-8
-8
- 10
- 10
- 10
- 10
-12
hose I.D.
2
[inch]
5/16
5/16
13/32
13/32
1/2
1/2
1/2
1/2
5/8
hose
dash 3
-6
-6
-8
-8
-8
- 10
-8
- 10
-12
548752
hose I.D.
3
[inch]
5/16
5/16
13/32
13/32
13/32
1/2
13/32
1/2
5/8
T-tee
Y-tee
code
code
BU-548750-06-06-06S
BU-548750-08-06-06S
BU-548750-08-08-08S
BU-548750-10-08-08S
BU-548750-10-10-08S
BU-548750-10-10-10S
BU-548750-12-10-08S
BU-548750-12-10-10S
BU-548750-12-12-12S
BU-548752-06-06-06S
BU-548752-08-08-08S
BU-548752-10-10-10S
BU-548752-12-12-12S
BURGACLIP - tube connection fitting with UNF female thread and R134 valve
54717
fitting
connection
size
-6
-6
-8
-8
-8
- 10
- 10
- 10
- 12
-12
-12
hose
dash
-6
-8
-8
- 10
- 12
-8
- 10
- 12
-12
-14
-16
thread
[inch]
54718
hose I.D.
[inch]
valve
size
54719
straight
45
90
code
code
code
5/8-18
5/16
16
BU-54717-06-06S*
BU-54718-06-06S*
5/8-18
13/32
16
3/4-16
13/32
16
BU-54717-08-08S*
BU-54718-08-08S*
3/4-16
1/2
16
BU-54717-08-10S*
3/4-16
5/8
16
7/8-14
13/32
13
7/8-14
1/2
13
BU-54717-10-10S*
BU-54718-10-10S*
7/8-14
5/8
13
BU-54717-10-12S*
BU-54718-10-12S*
1.1/16-14
5/8
13
BU-54717-12-12S*
BU-54718-12-12S*
1.1/16-14
3/4
13
BU-54717-12-14S
BU-54718-12-14S
1.1/16-14
7/8
13
BU-54717-12-16S
BU-54718-12-16S
* - available with R12 valve (BU-54710 - straight, BU-54711 - 45, BU-54712 - 90
BU-54719-06-06S*
BU-54719-06-08S*
BU-54719-08-08S
BU-54719-08-10S
BU-54719-08-12S
BU-54719-10-08S
BU-54719-10-10S*
BU-54719-10-12S*
BU-54719-12-12S*
BU-54719-12-14S
BU-54719-12-16S
269

BURGACLIP - tube connection fitting without nut
54724
fitting
connection
size
-6
-8
-8
- 10
- 10
- 12
- 12
- 12
- 12
54725
hose
dash
tube
[mm]
hose I.D.
[inch]
-6
-6
-8
- 10
- 12
- 10
-12
- 14
- 16
8,5
11,6
11,6
14,4
14,4
17,5
17,5
17,5
17,5
5/16
5/16
13/32
1/2
5/8
1/2
5/8
3/4
7/8
54726
straight
45
90
code
code
code
BU-54724-06-06S
BU-54724-08-06S
BU-54724-08-08S
BU-54724-10-10S
BU-54724-10-12S
BU-54724-12-10S
BU-54724-12-12S
BU-54724-12-14S
BU-54724-12-16S
BU-54725-06-06S
BU-54725-08-06S
BU-54725-08-08S
BU-54725-12-10S
BU-54725-12-12S
BU-54725-12-14S
BU-54725-12-16S
BU-54726-06-06S
BU-54726-08-06S
BU-54726-08-08S
BU-54726-10-12S
BU-54726-12-10S
BU-54726-12-12S
BU-54726-12-14S
BU-54726-12-16S
BURGACLIP - connection fitting with UNF female thread, SAE type, 45 cone
54701
fitting
connection
size
-4
-6
-6
-8
-8
-8
- 10
- 10
- 10
- 12
- 12
- 16
270
54702
hose
dash
thread
[inch]
hose I.D.
[inch]
-6
-6
-8
-6
-8
- 10
-8
- 10
- 12
-12
-14
-16
7/16-20
5/8-18
5/8-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
7/8-14
1.1/16-14
1.1/16-14
1.5/16-14
5/16
5/16
13/32
5/16
13/32
1/2
13/32
1/2
5/8
5/8
3/4
7/8
54703
straight
45
90
code
code
code
BU-54701-04-06S
BU-54702-04-06S
BU-54701-06-06S*
BU-54702-06-06S
BU-54701-06-08S*
BU-54701-08-06S
BU-54701-08-08S*
BU-54702-08-08S
BU-54701-08-10S
BU-54701-10-08S*
BU-54702-10-08S
BU-54701-10-10S*
BU-54702-10-10S
BU-54701-10-12S
BU-54702-10-12S
BU-54701-12-12S*
BU-54702-12-12S
BU-54701-12-14S
BU-54702-12-14S
BU-54701-16-16S
BU-54702-16-16S
* - available with male thread - BU-54201
BU-54703-04-06S
BU-54703-06-06S
BU-54703-06-08S
BU-54703-08-06S
BU-54703-08-08S
BU-54703-08-10S
BU-54703-10-08S
BU-54703-10-10S
BU-54703-10-12S
BU-54703-12-12S
BU-54703-16-16S

BURGACLIP - tube connection fitting with UNF female thread
54740 (54421)
fitting
connection
size
-6
-8
- 10
- 10
- 10
- 10
- 12
-12
-12
hose
dash
thread
[inch]
-6
-8
-8
- 10
- 10
-12
-12
-14
-16
5/8-18
3/4-16
7/8-14
7/8-14
7/8-14
7/8-14
1.1/16-14
1.1/16-14
1.1/16-14
hose I.D.
[inch]
54742
valve
size
54412 (54422)
standard
with R134 valve
with R134 valve
code
code
code
5/16
16
BU-54740-06-06S
BU-54742-06-06S
13/32
16
BU-54740-08-08S
BU-54742-08-08S
13/32
16
BU-54421-10-08S*
1/2
13
BU-54740-10-10S
BU-54742-10-10S
1/2
13
BU-54421-10-10S*
5/8
13
BU-54740-10-12S
BU-54742-10-12S
5/8
13
BU-54740-12-12S
BU-54742-12-12S
3/4
13
BU-54740-12-14S
BU-54742-12-14S
7/8
13
BU-54740-12-16S
BU-54742-12-16S
* - short drop version - with short part with a nut
BU-54412-06-06S
BU-54412-08-08S
BU-54422-10-08S*
BU-54412-10-10S
BU-54422-10-10S*
BU-54412-12-12S
-
BURGACLIP - quick release coupling connection
54747
fitting
connection
size
-8
-8
- 12
hose
dash
thread
[inch]
hose I.D.
[inch]
code
-6
-8
-10
7/8-20
7/8-20
1.1/4-18
5/16
13/32
1/2
BU-54747-08-06S
BU-54747-08-08S
BU-54747-12-10S
BURGACLIP - connection fitting with a female metric thread, type DIN 3865, 24 cone, light series
54901
fitting
connection
size
- 22
- 22
54910
hose
dash
thread
[inch]
hose I.D.
[inch]
-14
-16
M30x2
M30x2
3/4
7/8
straight
54904
45
90
code
code
code
BU-54901-22-14S
BU-54901-22-16S
BU-54910-22-14S
BU-54910-22-16S
BU-54904-22-14S
BU-54904-22-16S
271

BURGACLIP - tube connection fitting with UNF male thread
54213
fitting
connection
size
-6
-8
- 10
- 10
- 12
- 12
-12
-12
54215
hose
dash
thread
[inch]
hose I.D.
[inch]
-6
-8
- 10
- 12
- 10
-12
-14
16
5/8-18
3/4-18
7/8-18
7/8-18
1.1/16-16
1.1/16-16
1.1/16-16
1.1/16-16
5/16
13/32
1/2
5/8
1/2
5/8
3/4
7/8
54214
straight
45
90
code
code
code
BU-54213-06-06S
BU-54213-08-08S
BU-54213-10-10S
BU-54213-10-12S
BU-54213-12-10S
BU-54213-12-12S
BU-54213-12-14S
BU-54213-12-16S
BU-54215-06-06S
BU-54215-08-08S
BU-54215-10-10S
BU-54215-10-12S
BU-54215-12-12S
BU-54215-12-14S
BU-54215-12-16S
BU-54214-06-06S
BU-54214-08-08S
BU-54214-10-10S
BU-54214-10-12S
BU-54214-12-12S
BU-54214-12-14S
BU-54214-12-16S
BURGACLIP - tube connection fitting with UNF male thread with a R134 valve
54217
fitting
connection
size
-6
-8
- 10
- 12
-12
-12
hose
dash
thread
[inch]
hose I.D.
[inch]
valve
size
-6
-8
- 10
-12
-14
16
5/8-18
3/4-18
7/8-18
1.1/16-16
1.1/16-16
1.1/16-16
5/16
13/32
1/2
5/8
3/4
7/8
16
16
13
13
13
13
straight
45
90
code
code
code
BU-54217-06-06S
BU-54217-08-08S
BU-54217-10-10S
BU-54217-12-12S
BU-54217-12-14S
BU-54217-12-16S
BURGACLIP - tube connection fitting with UNF male thread, male insert
54206
fitting
connection
size
-6
-8
- 10
- 10
- 12
- 12
- 12
272
54207
hose
dash
thread
[inch]
hose I.D.
[inch]
-6
-8
- 10
-12
-12
-14
-16
5/8-18
3/4-16
7/8-14
7/8-14
1.1/16-14
1.1/16-14
1.1/16-14
5/16
13/32
1/2
5/8
5/8
3/4
7/8
54208
straight
45
90
code
code
code
BU-54206-06-06S
BU-54206-08-08S
BU-54206-10-10S
BU-54206-10-12S
BU-54206-12-12S
BU-54206-12-14S
BU-54206-12-16S
BU-54207-06-06S
BU-54207-08-08S
BU-54207-10-10S
BU-54207-12-12S
BU-54207-12-14S
BU-54207-12-16S
BU-54208-06-06S
BU-54208-08-08S
BU-54208-10-10S
BU-54208-12-12S
BU-54208-12-14S
BU-54208-12-16S

BURGACLIP - bulk head tube connection fitting with UNF male thread, male insert
54758
fitting
connection
size
-6
-8
- 10
- 12
- 12
- 12
54760
hose
dash
thread
[inch]
hose I.D.
[inch]
-6
-8
- 10
-12
-14
-16
5/8-18
3/4-16
7/8-14
1.1/16-14
1.1/16-14
1.1/16-14
5/16
13/32
1/2
5/8
3/4
7/8
54759
straight
45
90
code
code
code
BU-54758-06-06S
BU-54758-08-08S
BU-54758-10-10S
BU-54758-12-12S
BU-54758-12-14S
BU-54758-12-16S
BU-54760-06-06S
BU-54760-08-08S
BU-54760-10-10S
BU-54760-12-12S
BU-54760-12-14S
BU-54760-12-16S
BU-54759-06-06S
BU-54759-08-08S
BU-54759-10-10S
BU-54759-12-12S
BU-54759-12-14S
BU-54759-12-16S
BURGACLIP - connection fitting with UNF female thread, ORFS type, flat seal
54501
fitting
connection
size
-4
-6
-6
-8
-8
- 10
- 10
- 12
- 16
54502
hose
dash
thread
[inch]
hose I.D.
[inch]
-6
-6
-8
-8
- 10
- 10
- 12
-12
-16
9/16-18
11/16-16
11/16-16
13/16-16
13/16-16
1-14
1-14
1.3/16-12
1.7/16-12
5/16
5/16
13/32
13/32
1/2
1/2
5/8
5/8
7/8
54503
straight
45
90
code
code
code
BU-54501-04-06S
BU-54501-06-06S
BU-54501-08-08S
BU-54501-10-10S
BU-54501-12-12S
BU-54501-16-16S
BU-54502-04-06S
BU-54502-06-06S
BU-54502-08-08S
BU-54502-10-10S
BU-54502-10-12S
BU-54502-12-12S
BU-54502-16-16S
BU-54503-04-06S
BU-54503-06-06S
BU-54503-06-08S
BU-54503-08-08S
BU-54503-08-10S
BU-54503-10-10S
BU-54503-12-12S
BU-54503-16-16S
BURGACLIP - connection fitting with BOCK flange (41,8 mm)
54754
fitting
connection
size
- 16
- 16
54755
hose
dash
thread
[inch]
hose I.D.
[inch]
-14
-16
41,8
41,8
3/4
7/8
straight
54757
45
90
code
code
code
BU-54754-16-14S
BU-54754-16-16S
BU-54755-16-14S
BU-54755-16-16S
BU-54757-16-14S
BU-54757-16-16S
273

Hand crimper for air conditioning hoses
TNT 250
TNT 8
Crimping machines designed to assemble fittings on standard rubber hoses for air-conditioning systems in diameters:
5/16 (8 mm), 13/32 (10,3 mm), 1/2 (12,7 mm), 5/8 (16 mm). Using appropriate die sets, one can assemble
fittings on standard hoses and hoses with reduced outside diameter. Heads of the crimping machines allow the
hose to be pulled through them. This assembly solution makes crimping of the angular fittings particularly easy.
TNT 250 - six dies crimp. Depending on a version crimping is performed manually with the help of a special key,
by hydraulic pump that is manually, pneumatically or foot operated.
TNT 8 - eight dies crimp. Depending on a version crimping is performed by a simple electric drill, by hydraulic pump
that is manually or pneumatically operated.
description
code
PF-TNT250/B
PF-TNT250/P
PF-APT100
PF-FPT100
PF-MPT100
PF-UHT100
PF-HCT100
PF-HET100
PF-TNT8/MPT100MOSI
PF-TNT8/MPT10032SE
PF-TNT8/UHTM
PF-APT100/TNT8
PF-TNT250/P
274
Hand crimper, 6 die sets for standard and reduced O.D. hoses, lubricant, plastic caliper, tool
case.
Hand crimper with manually operated hydraulic pump, 6 die sets for standard and reduced
O.D. hoses, lubricant, plastic caliper, tool case.
Pneumatically operated hydraulic pump (600 bar) - TNT 250.
Foot operated hydraulic pump (700 bar).
Manually operated hydraulic pump.
Hydraulic actuator 5,6 T with 1,8 m hose (700 bar).
Hydraulic actuator 5,6 T.
1,8 m hose (700 bar).
Hand crimper with hydraulic pump operated by an electrical drill, 6 die sets for standard and
reduced O.D. hoses, tool case.
Hand crimper with manually operated hydraulic pump, 6 die sets for standard and reduced
O.D. hoses, tool case.
Hand crimper with hydraulic actuator with 1,8 m hose, 6 die sets for standard and reduced
O.D. hoses, tool case.
Pneumatically operated hydraulic pump (200 bar) - TNT 8.
PF-APT100
PF-FPT100
PF-TNT8/MPT100MOSI
PF-TNT8/MPT10032SE

Fittings for air-conditioning rubber hoses
SAE 45 male swivel, UNF thread
52201
fitting
connection
size
-6
-6
-8
- 10
- 10
- 10
- 12
51201
hose
dash
thread
[inch]
hose I.D.
[inch]
valve
size
-6
-8
-8
-8
- 10
- 12
- 12
5/8-18
5/8-18
3/4-16
7/8-14
7/8-14
7/8-14
1.1/16-14
5/16
13/32
13/32
13/32
1/2
5/8
5/8
crimping
crimping - LW hose
reusable
code
BU-52201-06-06
BU-52201-06-08
BU-52201-08-08
BU-52201-10-08
BU-52201-10-10
BU-52201-10-12
BU-52201-12-12
code
-
code
BU-51201-06-06
BU-51201-06-08
BU-51201-08-08
BU-51201-10-08
BU-51201-10-10
BU-51201-12-12
SAE 45 female swivel, UNF thread
52701
fitting
connection
size
-4
-4
-6
-6
-8
-8
-8
- 10
- 10
- 10
- 12
- 16
- 20
- 20
hose
dash
-4
-6
-6
-8
-6
-8
- 10
-8
- 10
- 12
- 12
-16
-16
-20
(52701)
thread
[inch]
hose I.D.
[inch]
53701
valve
size
crimping
51701
crimping - LW hose
code
code
7/16-20
3/16
7/16-20
5/16
BU-52701-04-06
BU-53701-04-06
5/8-18
5/16
BU-52701-06-06*
BU-53701-06-06*
5/8-18
13/32
BU-52701-06-08
BU-53701-06-08
3/4-16
5/16
BU-52701-08-06
BU-53701-08-06
3/4-16
13/32
BU-52701-08-08*
BU-53701-08-08*
3/4-16
1/2
BU-52701-08-10
BU-53701-08-10
7/8-14
13/32
BU-52701-10-08
7/8-14
1/2
BU-52701-10-10*
BU-53701-10-10*
7/8-14
5/8
BU-52701-10-12
1.1/16-14
5/8
BU-52701-12-12*
BU-53701-12-12*
1.5/16-12
7/8
(BU-52701-16-16**)
1.5/8-12
7/8
(BU-52701-20-16**)
1.5/8-12
1.1/8
(BU-52701-20-20**)
* - for all steel version add S to the part number; ** - cone 37
reusable
code
BU-51701-04-04
BU-51701-04-06
BU-51701-06-06
BU-51701-06-08
BU-51701-08-06
BU-51701-08-08
BU-51701-08-10
BU-51701-10-08
BU-51701-10-10
BU-51701-10-12
BU-51701-12-12
BU-51701-16-16**
BU-51701-20-20**
275

45 elbow, SAE 45 female swivel, UNF thread
52702
fitting
connection
size
-4
-4
-6
-6
-8
-8
-8
- 10
- 10
- 10
- 12
- 16
- 20
hose
dash
-4
-6
-6
-8
-6
-8
- 10
-8
- 10
- 12
- 12
- 16
- 20
thread
[inch]
53702
hose I.D.
[inch]
valve
size
crimping
51702
crimping - LW hose
code
code
7/16-20
3/16
7/16-20
5/16
BU-52702-04-06
BU-53702-04-06
5/8-18
5/16
BU-52702-06-06*
BU-53702-06-06*
5/8-18
13/32
BU-52702-06-08
3/4-16
5/16
BU-52702-08-06
3/4-16
13/32
BU-52702-08-08*
BU-53702-08-08*
3/4-16
1/2
BU-52702-08-10
7/8-14
13/32
BU-52702-10-08
7/8-14
1/2
BU-52702-10-10*
BU-53702-10-10*
7/8-14
5/8
BU-52702-10-12
1.1/16-14
5/8
BU-52702-12-12*
1.5/16-12
7/8
1.5/8-12
1.1/8
* * - for all steel version add S to the part number; ** - cone 37
reusable
code
BU-51702-04-04
BU-51702-04-06
BU-51702-06-06
BU-51702-08-08
BU-51702-10-08
BU-51702-10-10
BU-51702-10-12
BU-51702-12-12
BU-51702-16-16**
BU-51702-20-20**
90 elbow, SAE 45 female swivel, UNF thread
52703
fitting
connection
size
-4
-4
-6
-6
-8
-8
-8
- 10
- 10
- 10
- 12
- 16
- 20
276
hose
dash
-4
-6
-6
-8
-6
-8
- 10
-8
- 10
- 12
- 12
- 16
- 20
53703
thread
[inch]
hose I.D.
[inch]
valve
size
crimping
51703
crimping - LW hose
code
code
7/16-20
3/16
7/16-20
5/16
BU-52703-04-06
BU-53703-04-06
5/8-18
5/16
BU-52703-06-06*
BU-53703-06-06*
5/8-18
13/32
BU-52703-06-08
3/4-16
5/16
BU-52703-08-06
BU-53703-08-06
3/4-16
13/32
BU-52703-08-08*
BU-53703-08-08*
3/4-16
1/2
BU-52703-08-10
BU-53703-08-10
7/8-14
13/32
BU-52703-10-08
7/8-14
1/2
BU-52703-10-10*
BU-53703-10-10*
7/8-14
5/8
BU-52703-10-12*
1.1/16-14
5/8
BU-52703-12-12*
1.5/16-12
7/8
1.5/8-12
1.1/8
* * - for all steel version add S to the part number; ** - cone 37
reusable
code
BU-51703-04-04
BU-51703-04-06
BU-51703-06-06
BU-51703-08-06
BU-51703-08-08
BU-51703-08-10
BU-51703-10-08
BU-51703-10-10
BU-51703-10-12
BU-51703-12-12
BU-51703-16-16**
BU-51703-20-20**

O-ring pilot female swivel, UNF thread
52704
fitting
connection
size
-5
-6
-6
-8
-8
-8
- 10
- 10
- 10
- 10
- 12
- 12
- 12
- 12
53704
(52704)
hose
dash
thread
[inch]
-6
-6
-8
-6
-8
- 10
-6
-8
- 10
- 12
- 10
- 12
- 16
- 20
9/16-18
5/8-18
5/8-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
7/8-14
7/8-14
1.1/16-14
1.1/16-14
1.1/16-14
1.1/16-14
hose I.D.
[inch]
valve
size
crimping
51704
crimping - LW hose
code
code
5/16
BU-52704-05-06*
5/16
BU-52704-06-06*
BU-53704-06-06*
13/32
BU-52704-06-08
BU-53704-06-08S
5/16
BU-52704-08-06*
BU-53704-08-06
13/32
BU-52704-08-08*
BU-53704-08-08*
1/2
BU-52704-08-10*
BU-53704-08-10*
5/16
13/32
BU-53704-10-08S
1/2
BU-52704-10-10*
BU-53704-10-10*
5/8
BU-52704-10-12*
BU-53704-10-12*
1/2
BU-52704-12-10*
5/8
BU-52704-12-12*
BU-53704-12-12*
7/8
(BU-52704-12-16S)
1.1/8
* * - for all steel version add S to the part number
reusable
code
BU-51704-05-06
BU-51704-06-06
BU-51704-06-08
BU-51704-08-06
BU-51704-08-08
BU-51704-08-10
BU-51704-10-06
BU-51704-10-08
BU-51704-10-10
BU-51704-10-12
BU-51704-12-10
BU-51704-12-12
BU-51704-12-16
BU-51704-12-20
45 elbow, o-ring pilot female swivel, UNF thread
52705
fitting
connection
size
-5
-6
-6
-8
-8
-8
- 10
- 10
- 12
- 12
- 12
53705
(52705)
hose
dash
thread
[inch]
-6
-6
-8
-6
-8
- 10
- 10
- 12
- 10
- 12
- 16
9/16-18
5/8-18
5/8-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-14
1.1/16-14
1.1/16-14
hose I.D.
[inch]
valve
size
crimping
51705
crimping - LW hose
code
code
5/16
BU-52705-05-06*
5/16
BU-52705-06-06*
BU-53705-06-06*
13/32
BU-52705-06-08
5/16
13/32
BU-52705-08-08*
BU-53705-08-08*
1/2
BU-52705-08-10
BU-53705-08-10S
1/2
BU-52705-10-10*
BU-53705-10-10*
5/8
BU-52705-10-12*
BU-53705-10-12*
1/2
BU-52705-12-10*
5/8
BU-52705-12-12*
BU-53705-12-12*
7/8
(BU-52705-12-16S)
reusable
code
BU-51705-05-06
BU-51705-06-06
BU-51705-08-06
BU-51705-08-08
BU-51705-10-10
BU-51705-10-12
BU-51705-12-10
BU-51705-12-12
-
277

52706
fitting
connection
size
-5
-6
-6
-8
-8
-8
- 10
- 10
- 10
- 10
- 12
- 12
- 12
- 12
53706
(52706)
hose
dash
thread
[inch]
-6
-6
-8
-6
-8
- 10
-6
-8
- 10
- 12
- 10
- 12
- 16
- 20
9/16-18
5/8-18
5/8-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
7/8-14
7/8-14
1.1/16-14
1.1/16-14
1.1/16-14
1.1/16-14
hose I.D.
[inch]
valve
size
crimping
51706
crimping - LW hose
code
code
5/16
BU-52706-05-06*
5/16
BU-52706-06-06*
BU-53706-06-06*
13/32
BU-52706-06-08*
BU-53706-06-08*
5/16
BU-52706-08-06*
BU-53706-08-06
13/32
BU-52706-08-08*
BU-53706-08-08*
1/2
BU-52706-08-10*
BU-53706-08-10*
5/16
13/32
BU-53706-10-08S
1/2
BU-52706-10-10*
BU-53706-10-10*
5/8
BU-52706-10-12*
BU-53706-10-12*
1/2
BU-52706-12-10*
BU-53706-12-10S
5/8
BU-52706-12-12*
BU-53706-12-12*
7/8
(BU-52706-12-16S)
1.1/8
reusable
code
BU-51706-05-06
BU-51706-06-06
BU-51706-06-08
BU-51706-08-06
BU-51706-08-08
BU-51706-08-10
BU-51706-10-06
BU-51706-10-08
BU-51706-10-10
BU-51706-10-12
BU-51706-12-10
BU-51706-12-12
BU-51706-12-16
BU-51706-12-20
53771
52771
fitting
connection
size
-6
-8
- 10
- 12
278
hose
dash
thread
[inch]
-6
-8
- 10
- 12
5/8-18
3/4-16
7/8-14
1.1/16-14
hose I.D.
[inch]
valve
size
crimping
crimping - LW hose
code
code
5/16
BU-52771-06-06*
BU-53771-06-06S
13/32
BU-52771-08-08*
BU-53771-08-08S
1/2
BU-52771-10-10*
BU-53771-10-10S
5/8
BU-52771-12-12*
BU-53771-12-12S
reusable
code
-

O-ring pilot female swivel, UNF thread, R12 valve
52710
fitting
connection
size
-6
-8
-8
- 10
- 10
- 10
- 12
hose
dash
thread
[inch]
-6
-8
- 10
-8
- 10
- 12
- 12
5/8-18
3/4-16
3/4-16
7/8-14
7/8-14
7/8-14
1.1/16-14
51710
hose I.D.
[inch]
valve
size
crimping
crimping - LW hose
code
5/16
1/4
BU-52710-06-06*
13/32
1/4
BU-52710-08-08*
1/2
1/4
13/32
1/4
1/2
1/4
BU-52710-10-10*
5/8
1/4
5/8
1/4
BU-52710-12-12
code
-
reusable
code
BU-51710-06-06
BU-51710-08-08
BU-51710-08-10
BU-51710-10-08
BU-51710-10-10
BU-51710-10-12
BU-51710-12-12
45 elbow, o-ring pilot female swivel, UNF thread, R12 valve
52711
fitting
connection
size
-6
-8
- 10
- 10
- 12
hose
dash
thread
[inch]
-6
-8
- 10
- 12
- 12
5/8-18
3/4-16
7/8-14
7/8-14
1.1/16-14
51711
hose I.D.
[inch]
valve
size
crimping
crimping - LW hose
code
5/16
1/4
BU-52711-06-06*
13/32
1/4
BU-52711-08-08
1/2
1/4
BU-52711-10-10
5/8
1/4
BU-52711-10-12
5/8
1/4
BU-52711-12-12
code
-
reusable
code
BU-51711-06-06
BU-51711-08-08
BU-51711-10-10
BU-51711-10-12
BU-51711-12-12
52712
fitting
connection
size
-6
-8
-8
- 10
- 10
- 12
hose
dash
thread
[inch]
-6
-6
-8
- 10
- 12
- 12
5/8-18
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-14
51712
valve
crimping
crimping - LW hose
size
[inch]
code
code
5/16
1/4
BU-52712-06-06*
5/16
1/4
BU-52712-08-06
13/32
1/4
BU-52712-08-08*
1/2
1/4
BU-52712-10-10*
5/8
1/4
BU-52712-10-12
5/8
1/4
hose I.D.
[inch]
reusable
code
BU-51712-06-06
BU-51712-08-08
BU-51712-10-10
BU-51712-10-12
BU-51712-12-12
279

O-ring pilot female swivel, UNF thread, R134 valve
52717
fitting
connection
size
-6
-8
-8
- 10
- 10
- 12
53717
hose
dash
thread
[inch]
-6
-8
- 10
- 10
- 12
- 12
5/8-18
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-14
51717
valve
crimping
crimping - LW hose
size
code
code
[mm]
5/16
16
BU-52717-06-06*
BU-53717-06-06*
13/32
16
BU-52717-08-08*
BU-53717-08-08*
1/2
16
1/2
13
BU-52717-10-10*
BU-53717-10-10*
5/8
13
BU-52717-10-12*
BU-53717-10-12*
5/8
13
BU-52717-12-12*
BU-53717-12-12
hose I.D.
[inch]
reusable
code
BU-51717-06-06
BU-51717-08-08
BU-51717-08-10
BU-51717-10-10
BU-51717-10-12
BU-51717-12-12
52718
fitting
connection
size
-6
-8
- 10
- 10
- 12
53718
hose
dash
thread
[inch]
-6
-8
- 10
- 12
- 12
5/8-18
3/4-16
7/8-14
7/8-14
1.1/16-14
51718
valve
crimping
crimping - LW hose
size
code
code
[mm]
5/16
16
BU-52718-06-06*
13/32
16
BU-52718-08-08*
BU-53718-08-08*
1/2
13
BU-52718-10-10*
BU-53718-10-10*
5/8
13
BU-52718-10-12*
5/8
13
BU-52718-12-12*
hose I.D.
[inch]
reusable
code
BU-51718-06-06
BU-51718-08-08
BU-51718-10-10
BU-51718-10-12
BU-51718-12-12
52719
fitting
connection
size
-6
-6
-8
-8
-8
- 10
- 10
- 10
- 12
- 12
280
53719
hose
dash
thread
[inch]
-6
-8
-8
- 10
- 12
- 08
- 10
- 12
- 12
- 16
5/8-18
5/8-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
7/8-14
1.1/16-14
1.1/16-14
51719
valve
crimping
crimping - LW hose
size
code
code
[mm]
5/16
16
BU-52719-06-06*
BU-53719-06-06*
13/32
16
13/32
16
BU-52719-08-08*
BU-53719-08-08*
1/2
16
5/8
16
13/32
13
1/2
13
BU-52719-10-10*
BU-53719-10-10*
5/8
13
BU-52719-10-12*
BU-53719-10-12*
5/8
13
BU-52719-12-12*
7/8
13
hose I.D.
[inch]
reusable
code
BU-51719-06-06
BU-51719-06-08
BU-51719-08-08
BU-51719-08-10
BU-51719-08-12
BU-51719-10-08
BU-51719-10-10
BU-51719-10-12
BU-51719-12-12
BU-51719-12-16

90 elbow, block type, o-ring pilot female swivel, UNF thread
52740
fitting
connection
size
-6
-8
- 10
- 10
- 12
- 12
53740
hose
dash
thread
[inch]
hose I.D.
[inch]
-6
-8
- 10
- 12
- 10
- 12
5/8-18
3/4-16
7/8-14
7/8-14
1.1/16-14
1.1/16-14
5/16
13/32
1/2
5/8
1/2
5/8
valve
size
51740
crimping
code
BU-52740-06-06S
BU-52740-08-08S
BU-52740-10-10S
BU-52740-10-12S
BU-52740-12-10S
BU-52740-12-12S
S - steel version
crimping - LW hose
reusable
code
BU-53740-06-06S
BU-53740-08-08S
BU-53740-10-10S
BU-53740-12-12S
code
BU-51740-06-06
BU-51740-08-08
BU-51740-10-10
BU-51740-10-12
BU-51740-12-12
90 elbow, block type, o-ring pilot female swivel, UNF thread, R12 valve
51741
fitting
connection
size
-6
-8
- 10
- 10
- 12
hose
dash
thread
[inch]
hose I.D.
[inch]
-6
-8
- 10
- 12
- 12
5/8-18
3/4-16
7/8-14
7/8-14
1.1/16-14
5/16
13/32
1/2
5/8
5/8
valve
size
[inch]
1/4
1/4
1/4
1/4
1/4
crimping
crimping - LW hose
reusable
code
-
code
-
code
BU-51741-06-06
BU-51741-08-08
BU-51741-10-10
BU-51741-10-12
BU-51741-12-12
90 elbow, block type, o-ring pilot female swivel, UNF thread, R134 valve
52742
fitting
connection
size
-6
-8
- 10
- 10
- 12
51742
hose
dash
thread
[inch]
hose I.D.
[inch]
-6
-8
- 10
- 12
- 12
5/8-18
3/4-16
7/8-14
7/8-14
1.1/16-14
5/16
13/32
1/2
5/8
5/8
valve
crimping
size
[mm]
code
16
BU-52742-06-06S
16
BU-52742-08-08S
13
BU-52742-10-10S
13
13
BU-52742-12-12S
S - steel version
crimping - LW hose
reusable
code
-
code
BU-51742-06-06
BU-51742-08-08
BU-51742-10-10
BU-51742-10-12
BU-51742-12-12
281

O-ring pilot, without nut
52724
fitting
connection
size
-6
-8
-8
- 10
- 12
- 12
53724
hose
dash
tube
size
-6
-6
-8
- 10
- 10
- 12
8,5
11,6
11,6
14,4
17,5
17,5
hose I.D.
[inch]
valve
size
crimping
51724
crimping - LW hose
code
code
5/16
BU-52724-06-06*
BU-53724-06-06*
5/16
BU-52724-08-06*
BU-53724-08-06
13/32
BU-52724-08-08*
BU-53724-08-08
1/2
BU-52724-10-10*
BU-53724-10-10
1/2
BU-52724-12-10
BU-53724-12-10*
5/8
BU-52724-12-12*
BU-53724-12-12
reusable
code
BU-51724-06-06
BU-51724-08-06
BU-51724-08-08
BU-51724-10-10
BU-51724-12-10
BU-51724-12-12
45 elbow, o-ring pilot, without nut
52725
fitting
connection
size
-6
-8
-8
- 12
- 12
53725
hose
dash
tube
size
-6
-6
-8
- 10
- 12
8,5
11,6
11,6
17,5
17,5
hose I.D.
[inch]
valve
size
crimping
51725
crimping - LW hose
code
code
5/16
BU-52725-06-06*
BU-53725-06-06*
5/16
BU-52725-08-06
BU-53725-08-06
13/32
BU-52725-08-08*
BU-53725-08-08
1/2
BU-52725-12-10*
BU-53725-12-10S
5/8
reusable
code
BU-51725-06-06
BU-51725-08-06
BU-51725-08-08
BU-51725-12-10
BU-51725-12-12
90 elbow, o-ring pilot, without nut
52726
fitting
connection
size
-6
-8
-8
- 10
- 12
- 12
282
53726
hose
dash
tube
size
-6
-6
-8
- 10
- 10
- 12
8,5
11,6
11,6
14,4
17,5
17,5
hose I.D.
[inch]
valve
size
crimping
51726
crimping - LW hose
code
code
5/16
BU-52726-06-06*
BU-53726-06-06*
5/16
BU-52726-08-06*
BU-53726-08-06
13/32
BU-52726-08-08*
1/2
BU-52726-10-10
1/2
BU-52726-12-10*
BU-53726-12-10*
5/8
BU-52726-12-12*
reusable
code
BU-51726-06-06
BU-51726-08-06
BU-51726-08-08
BU-51726-12-10
BU-51726-12-12

Compressor fitting female swivel, UNF thread
52707
fitting
connection
size
- 10
- 10
- 10
53707
hose
dash
thread
[inch]
-8
- 10
- 12
1-14
1-14
1-14
hose I.D.
[inch]
valve
size
crimping
51707
crimping - LW hose
code
code
13/32
BU-52707-10-08*
BU-53707-10-08
1/2
BU-52707-10-10*
BU-53707-10-10
5/8
BU-52707-10-12*
BU-53707-10-12*
reusable
code
BU-51707-10-08
BU-51707-10-10
BU-51707-10-12
45 elbow, compressor fitting female swivel, UNF thread
52708
fitting
connection
size
- 10
- 10
- 10
53708
hose
dash
thread
[inch]
-8
- 10
- 12
1-14
1-14
1-14
hose I.D.
[inch]
valve
size
crimping
51708
crimping - LW hose
code
code
13/32
BU-52708-10-08*
BU-53708-10-08
1/2
BU-52708-10-10*
BU-53708-10-10
5/8
BU-52708-10-12*
BU-53708-10-12
reusable
code
BU-51708-10-08
BU-51708-10-10
BU-51708-10-12
90 elbow, compressor fitting female swivel, UNF thread
52709
fitting
connection
size
- 10
- 10
- 10
53709
hose
dash
thread
[inch]
-8
- 10
- 12
1-14
1-14
1-14
hose I.D.
[inch]
valve
size
crimping
51709
crimping - LW hose
code
code
13/32
BU-52709-10-08*
BU-53709-10-08*
1/2
BU-52709-10-10*
BU-53709-10-10*
5/8
BU-52709-10-12*
BU-53709-10-12
reusable
code
BU-51709-10-08
BU-51709-10-10
BU-51709-10-12
283

Compressor fitting female swivel, UNF thread, R12 valve
52730
fitting
connection
size
- 10
- 10
- 10
51730
hose
dash
thread
[inch]
hose I.D.
[inch]
-8
- 10
- 12
1-14
1-14
1-14
13/32
1/2
5/8
valve
size
[inch]
1/4
1/4
1/4
crimping
crimping - LW hose
reusable
code
BU-52730-10-08
BU-52730-10-10
-
code
-
code
BU-51730-10-08
BU-51730-10-10
BU-51730-10-12
45 elbow, compressor fitting female swivel, UNF thread, R12 valve
52731
fitting
connection
size
- 10
- 10
- 10
51731
hose
dash
thread
[inch]
hose I.D.
[inch]
-8
- 10
- 12
1-14
1-14
1-14
13/32
1/2
5/8
valve
size
[inch]
1/4
1/4
1/4
crimping
crimping - LW hose
reusable
code
BU-52731-10-08
BU-52731-10-10
-
code
-
code
BU-51731-10-08
BU-51731-10-10
BU-51731-10-12
52732
fitting
connection
size
- 10
- 10
- 10
284
51732
hose
dash
thread
[inch]
hose I.D.
[inch]
-8
- 10
-12
1-14
1-14
1-14
13/32
1/2
5/8
valve
crimping
size
[inch]
code
1/4
BU-52732-10-08S
1/4
BU-52732-10-10S
1/4
BU-52732-10-12S
S - steel version
crimping - LW hose
reusable
code
-
code
BU-51732-10-08
BU-51732-10-10
BU-51732-10-12

Compressor fitting female swivel, UNF thread, R134 valve
52733
fitting
connection
size
- 10
- 10
- 10
hose
dash
thread
[inch]
-8
- 10
- 12
1-14
1-14
1-14
51733
valve
crimping
crimping - LW hose
size
[mm]
code
code
13/32
16
BU-52733-10-08*
1/2
13
BU-52733-10-10*
5/8
13
BU-52733-10-12*
hose I.D.
[inch]
reusable
code
BU-51733-10-08
BU-51733-10-10
BU-51733-10-12
52734
fitting
connection
size
- 10
- 10
- 10
hose
dash
thread
[inch]
-8
- 10
- 12
1-14
1-14
1-14
51734
valve
crimping
crimping - LW hose
size
[mm]
code
code
13/32
16
BU-52734-10-08*
1/2
13
BU-52734-10-10*
5/8
13
BU-52734-10-12*
hose I.D.
[inch]
reusable
code
BU-51734-10-08
BU-51734-10-10
BU-51734-10-12
52735
fitting
connection
size
- 10
- 10
- 10
53735
hose
dash
thread
[inch]
-8
- 10
- 12
1-14
1-14
1-14
51735
valve
crimping
crimping - LW hose
size
[mm]
code
code
13/32
16
BU-52735-10-08*
BU-53735-10-08S
1/2
13
BU-52735-10-10*
BU-53735-10-10S
5/8
13
BU-52735-10-12*
BU-53735-10-12S
hose I.D.
[inch]
reusable
code
BU-51735-10-08
BU-51735-10-10
BU-51735-10-12
285

O-ring pilot male swivel, UNF thread
52213
fitting
connection
size
-6
-6
-8
-8
- 10
- 10
- 12
- 12
53213
(52213)
hose
dash
thread
[inch]
-6
-8
-6
-8
- 10
- 12
- 12
- 16
5/8-18
5/8-18
3/4-18
3/4-18
7/8-18
7/8-18
1.1/16-16
1.1/16-16
hose I.D.
[inch]
valve
size
crimping
51213
crimping - LW hose
code
code
5/16
BU-52213-06-06*
BU-53213-06-06*
13/32
BU-52213-06-08
5/16
BU-52213-08-06
13/32
BU-52213-08-08*
BU-53213-08-08*
1/2
BU-52213-10-10*
BU-53213-10-10*
5/8
BU-52213-10-12*
BU-53213-10-12*
5/8
BU-52213-12-12*
BU-53213-12-12*
7/8
(BU-52213-12-16S)
reusable
code
BU-51213-06-06
BU-51213-08-08
BU-51213-10-10
BU-51213-10-12
BU-51213-12-12
-
45 elbow, o-ring pilot male swivel, UNF thread
52215
fitting
connection
size
-6
-6
-8
-8
- 10
- 10
- 12
- 12
286
53215
hose
dash
thread
[inch]
-6
-8
-6
-8
- 10
- 12
- 12
- 16
5/8-18
5/8-18
3/4-18
3/4-18
7/8-18
7/8-18
1.1/16-16
1.1/16-16
hose I.D.
[inch]
valve
size
crimping
51215
crimping - LW hose
code
code
5/16
BU-52215-06-06*
BU-53215-06-06*
13/32
BU-52215-06-08
5/16
BU-52215-08-06
13/32
BU-52215-08-08*
BU-53215-08-08*
1/2
BU-52215-10-10*
BU-53215-10-10*
5/8
BU-52215-10-12
5/8
BU-52215-12-12*
BU-53215-12-12*
7/8
BU-52215-12-16
reusable
code
BU-51215-06-06
BU-51215-08-08
BU-51215-10-10
BU-51215-10-12
BU-51215-12-12
-

90 elbow, o-ring pilot male swivel, UNF thread
(52214)
52214
fitting
connection
size
-6
-6
-8
-8
- 10
- 10
- 12
- 12
hose
dash
thread
[inch]
-6
-8
-6
-8
- 10
- 12
- 12
- 16
5/8-18
5/8-18
3/4-18
3/4-18
7/8-18
7/8-18
1.1/16-16
1.1/16-16
hose I.D.
[inch]
53214
valve
size
crimping
51214
crimping - LW hose
code
code
5/16
BU-52214-06-06*
BU-53214-06-06*
13/32
BU-52214-06-08
5/16
BU-52214-08-06
13/32
BU-52214-08-08*
BU-53214-08-08*
1/2
BU-52214-10-10*
BU-53214-10-10*
5/8
BU-52214-10-12
BU-53214-10-12*
5/8
BU-52214-12-12*
BU-53214-12-12
7/8
(BU-52214-12-16)
reusable
code
BU-51214-06-06
BU-51214-08-08
BU-51214-10-10
BU-51214-10-12
BU-51214-12-12
-
90 elbow, o-ring pilot male swivel, UNF thread, R134 valve
52217
fitting
connection
size
-6
-8
- 10
- 12
hose
dash
thread
[inch]
hose I.D.
[inch]
-6
-8
- 10
- 12
5/8-18
3/4-18
7/8-18
1.1/16-16
5/16
13/32
1/2
5/8
before crimping
valve
crimping
size
[mm]
code
16
BU-52217-06-06S
16
BU-52217-08-08S
13
BU-52217-10-10S
13
BU-52217-12-12S
S - steel version
crimping - LW hose
reusable
code
-
code
-
after crimping
287

O-ring male, UNF thread
52206
fitting
connection
size
-6
-8
- 10
- 10
- 10
- 12
53206
hose
dash
thread
[inch]
-6
-8
-8
- 10
- 12
- 12
5/8-18
3/4-16
7/8-14
7/8-14
7/8-14
1.1/16-14
hose I.D.
[inch]
valve
size
crimping
51206
crimping - LW hose
code
code
5/16
BU-52206-06-06*
BU-53206-06-06*
13/32
BU-52206-08-08*
BU-53206-08-08*
13/32
BU-52206-10-08S
1/2
BU-52206-10-10*
BU-53206-10-10*
5/8
BU-52206-10-12S
5/8
BU-52206-12-12*
BU-53206-12-12
reusable
code
BU-51206-06-06
BU-51206-08-08
BU-51206-10-10
BU-51206-10-12
BU-51206-12-12
45 elbow, o-ring male, UNF thread
52207
fitting
connection
size
-6
-8
- 10
- 12
53207
hose
dash
thread
[inch]
-6
-8
- 10
- 12
5/8-18
3/4-16
7/8-14
1.1/16-14
hose I.D.
[inch]
valve
size
crimping
51207
crimping - LW hose
code
code
5/16
BU-52207-06-06*
BU-53207-06-06
13/32
BU-52207-08-08*
BU-53207-08-08
1/2
BU-52207-10-10*
BU-53207-10-10
5/8
BU-52207-12-12*
BU-53207-12-12
reusable
code
BU-51207-06-06
BU-51207-08-08
BU-51207-10-10
BU-51207-12-12
90 elbow, o-ring male, UNF thread
52208
fitting
connection
size
-6
-8
- 10
- 12
288
53208
hose
dash
thread
[inch]
-6
-8
- 10
- 12
5/8-18
3/4-16
7/8-14
1.1/16-14
hose I.D.
[inch]
valve
size
crimping
51208
crimping - LW hose
code
code
5/16
BU-52208-06-06*
BU-53208-06-06*
13/32
BU-52208-08-08*
BU-53208-08-08
1/2
BU-52208-10-10*
BU-53208-10-10*
5/8
BU-52208-12-12*
BU-53208-12-12*
reusable
code
BU-51208-06-06
BU-51208-08-08
BU-51208-10-10
BU-51208-12-12

O-ring male, bulkhead, UNF thread
52758
fitting
connection
size
-6
-8
- 10
- 10
- 12
hose
dash
thread
[inch]
-6
-8
- 10
- 12
- 12
5/8-18
3/4-16
7/8-14
7/8-14
1.1/16-14
53758
hose I.D.
[inch]
valve
size
crimping
crimping - LW hose
code
code
5/16
BU-52758-06-06*
BU-53758-06-06S
13/32
BU-52758-08-08*
BU-53758-08-08S
1/2
BU-52758-10-10*
BU-53758-10-10S
5/8
BU-52758-10-12S
5/8
BU-52758-12-12S
reusable
code
-
45 elbow, o-ring male, bulkhead, UNF thread
52760
fitting
connection
size
-6
-8
- 10
hose
dash
thread
[inch]
hose I.D.
[inch]
valve
size
-6
-8
- 10
5/8-18
3/4-16
7/8-14
5/16
13/32
1/2
crimping
crimping - LW hose
reusable
code
-
code
-
crimping - LW hose
reusable
code
BU-52760-06-06S
BU-52760-08-08S
BU-52760-10-10S
S - steel version
52759
fitting
connection
size
-6
-8
- 10
hose
dash
thread
[inch]
-6
-8
- 10
5/8-18
3/4-16
7/8-14
hose I.D.
[inch]
valve
size
crimping
code
5/16
BU-52759-06-06*
13/32
BU-52759-08-08*
1/2
BU-52759-10-10*
code
-
code
-
289

Quick disconnection male, UNF thread
52747
fitting
connection
size
-8
- 12
53747
hose
dash
thread
[inch]
hose I.D.
[inch]
valve
size
-6
- 10
7/8-20
1.1/4-18
5/16
1/2
crimping
crimping - LW hose
reusable
code
BU-52747-08-06
BU-52747-12-10
code
BU-53747-08-06S
BU-53747-12-10S
code
-
Braze nipple
52743
fitting
connection
size
-6
-8
- 10
- 12
- 16
- 20
53743
hose
dash
thread
[inch]
-6
-8
- 10
- 12
- 16
- 20
3/8
1/2
5/8
3/4
1
1.1/4
hose I.D.
[inch]
valve
size
51743
crimping
crimping - LW hose
code
code
5/16
BU-52743-06-06S
BU-53743-06-06*
13/32
BU-52743-08-08S
BU-53743-08-08*
1/2
BU-52743-10-10S
BU-53743-10-10*
5/8
BU-52743-12-12S
BU-53743-12-12*
7/8
1.1/8
reusable
code
BU-51743-06-06
BU-51743-08-08
BU-51743-10-10
BU-51743-12-12
BU-51743-16-16
BU-51743-20-20
51744
fitting
connection
size
-6
-8
- 10
290
hose
dash
thread
[inch]
hose I.D.
[inch]
valve
size
-6
-8
- 10
5/8-18
3/4-16
7/8-14
5/16
13/32
1/2
crimping
crimping - LW hose
reusable
code
-
code
-
code
BU-51744-06-06
BU-51744-08-08
BU-51744-10-10

BOCK flange connection (41,8 mm)
52754
fitting
connection
size
- 16
- 16
- 16
- 16
- 16
- 16
- 16
- 16
hose
dash
- 16
- 20
- 12
- 16
- 20
- 12
- 16
- 20
conection
size
[mm]
41,8
41,8
41,8
41,8
41,8
41,8
41,8
41,8
51754
hose ID
[inch]
type
7/8
1.1/8
5/8
7/8
1.1/8
5/8
7/8
1.1/8
straight
straight
45
45
45
90
90
90
crimping
crimping - LW hose
reusable
code
BU-52754-16-16
BU-52754-16-20
BU-52755-16-16
BU-52755-16-20
BU-52757-16-16
BU-52757-16-20
code
-
code
BU-51754-16-16
BU-51754-16-20
BU-51755-16-12
BU-51755-16-16
BU-51755-16-20
BU-51757-16-12
BU-51757-16-16
BU-51757-16-20
DIN 3865, cone 24, light series, female swivel, metric thread
52901
51901
52904
51908
52910
fitting
connection
size
- 22
- 28
- 22
- 28
- 22
- 28
51904
hose
dash
thread
[inch]
hose I.D.
[inch]
type
- 16
- 20
- 16
- 20
- 16
- 20
M30x2
M36x2
M30x2
M36x2
M30x2
M36x2
7/8
1.1/8
7/8
1.1/8
7/8
1.1/8
straight
straight
45
45
90
90
crimping
crimping - LW hose
reusable
code
BU-52901-22-16
BU-52901-28-20
BU-52910-22-16
BU-52910-28-20
BU-52904-22-16
BU-52904-28-20
code
-
code
BU-51901-22-16
BU-51901-28-20
BU-51908-22-16
BU-51908-28-20
BU-51904-22-16
BU-51904-28-20
FORD female SPRINGLOCK
52761
fitting
connection
size
-6
-8
-8
- 10
- 10
- 12
52762
hose
dash
socket
size
hose I.D.
[inch]
valve
size
-6
-6
-8
- 10
- 12
- 12
5/16
5/16
13/32
1/2
5/8
5/8
52763
crimping
crimping - LW hose
reusable
code
BU-52761-06-06
BU-52761-08-06
BU-52761-08-08
BU-52761-10-10
BU-52761-10-12
BU-52761-12-12
code
BU-52762-06-06
BU-52762-08-06
BU-52762-08-08
BU-52762-10-10
BU-52762-10-12
BU-52762-12-12
code
BU-52763-06-06
BU-52763-08-06
BU-52763-08-08
BU-52763-10-10
BU-52763-10-12
BU-52763-12-12
291

FORD plug SPRINGLOCK
52764
fitting
connection
size
-6
-8
-8
- 10
- 10
- 12
52765
hose
dash
plug
size
hose I.D.
[inch]
valve
size
-6
-6
-8
- 10
- 12
- 12
5/16
5/16
13/32
1/2
5/8
5/8
52766
crimping
45 crimping
90 crimping
code
BU-52764-06-06
BU-52764-08-06
BU-52764-08-08
BU-52764-10-10
BU-52764-10-12
BU-52764-12-12
code
BU-52765-06-06
BU-52765-08-06
BU-52765-08-08
BU-52765-10-10
BU-52765-10-12
BU-52765-12-12
code
BU-52766-06-06
BU-52766-08-06
BU-52766-08-08
BU-52766-10-10
BU-52766-10-12
BU-52766-12-12
ORFS female swivel, UNF thread
51501
fitting
connection
size
-4
-6
-8
- 10
- 12
- 16
- 20
51502
hose
dash
thread
[inch]
hose I.D.
[inch]
valve
size
-4
-6
-8
- 10
- 12
- 16
- 20
9/16-18
11/16-16
13/16-16
1-14
1.3/16-12
1.7/16-12
1.11/16-12
3/16
5/16
13/32
1/2
5/8
7/8
1.1/8
51503
reusable
45 reusable
90 reusable
code
BU-51501-04-04
BU-51501-06-06
BU-51501-08-08
BU-51501-10-10
BU-51501-12-12
BU-51501-16-16
BU-51501-20-20
code
BU-51502-04-04
BU-51502-06-06
BU-51502-08-08
BU-51502-10-10
BU-51502-12-12
BU-51502-16-16
BU-51502-20-20
code
BU-51503-04-04
BU-51503-06-06
BU-51503-08-08
BU-51503-10-10
BU-51503-12-12
BU-51503-16-16
BU-51503-20-20
crimping - LW hose
reusable
Tee
7097
hose
dash
hose
dash
hose I.D.
[inch]
-6
-8
- 10
- 12
- 12
-6
-8
- 10
- 10
-10
5/16
13/32
1/2
5/8 x 2
5/8
292
hose I.D.
[inch]
valve
size
crimping
code
5/16
BU-7097-06-06*
13/32
BU-7097-08-08*
1/2
BU-7097-10-10*
1/2
BU-7097-12-10*
5/8
BU-7097-12-12*
code
-
code
-

In-line splicer, R134 valve
7024
hose
dash 1
hose
dash 2
-6
-8
- 10
- 12
-6
-8
- 10
- 12
8008
hose I.D.
1
[inch]
5/16
13/32
1/2
5/8
7031
hose I.D.
crimping
crimping - LW hose
valve
2
size
[inch]
code
code
5/16
16
BU-7024-06-06*
BU-8008-06-06*
13/32
16
BU-7024-08-08*
BU-8008-08-08*
1/2
13
BU-7024-10-10*
BU-8008-10-10*
5/8
13
BU-7024-12-12*
BU-8008-12-12*
reusable
code
BU-7031-06-06
BU-7031-08-08
BU-7031-10-10
BU-7031-12-12
In-line splicer, R12 valve
7020 7023
hose
dash 1
hose
dash 2
-6
-6
-8
-8
- 10
- 12
-6
-6
-8
-8
- 10
- 12
hose I.D.
1
[inch]
5/16
5/16
13/32
13/32
1/2
5/8
7030 7025
hose I.D.
crimping
crimping - LW hose
valve
2
size
code
code
[inch]
5/16
3/16
BU-7020-06-06
13/32
1/4
BU-7023-06-06
13/32
3/16
BU-7020-08-08
1/2
1/4
BU-7023-08-08
1/2
1/4
BU-7020-10-10
5/8
1/4
BU-7020-12-12
reusable
code
BU-7030-06-06
BU-7025-06-06
BU-7030-08-08
BU-7025-08-08
BU-7025-10-10
BU-7025-12-12
In-line splicer
7087
hose
dash 1
hose
dash 2
-6
-6
-8
-8
- 10
- 10
- 12
-6
-8
-8
- 10
- 10
- 12
- 12
8007
hose I.D.
1
[inch]
5/16
5/16
13/32
13/32
1/2
1/2
5/8
7086
hose I.D.
crimping
crimping - LW hose
valve
2
size
code
code
[inch]
5/16
BU-7087-06-06*
BU-8007-06-06*
13/32
BU-7087-06-08*
BU-8007-06-08*
13/32
BU-7087-08-08*
BU-8007-08-08*
1/2
BU-7087-08-10
BU-8007-08-10*
1/2
BU-7087-10-10*
BU-8007-10-10*
5/8
BU-7087-10-12*
BU-8007-10-12*
5/8
BU-7087-12-12*
BU-8007-12-12*
reusable
code
BU-7086-06-06
BU-7086-08-08
BU-7086-10-10
BU-7086-12-12
293

Ferrule
2051
2056
1052
115
reusable
reusable
hose
dash
hose ID
[inch]
crimping
3055 hose
code
crimping
3056 hose
code
3055 hose
code
3056 hose
code
-4
-6
-8
- 10
-12
- 16
- 20
- 24
3/16
5/16
13/32
1/2
5/8
7/8
1.1/8
1. 3/8
BU-2051-06
BU-2051-08
BU-2051-10
BU-2051-12
-
BU-2056-04
BU-2056-16
BU-2056-20
-
BU-1052-06
BU-1052-08
BU-1052-10
BU-1052-12
-
BU-115-04
BU-115-06
BU-115-08
BU-115-10
BU-115-12
BU-115-16
BU-115-20
BU-115-24
Female UNF SAE 45 / UNF male
Adaptor 90 2 x UNF male
Tee 3 x UNF male
7050
8020
8048
code
thread 1
[inch]
thread 2
[inch]
code
thread
[inch]
code
thread
[inch]
BU-7050-06-06
BU-7050-08-08
BU-7050-08-10
BU-7050-10-10
5/8-18
3/4-16
3/4-16
7/8-14
5/8-18
3/4-16
7/8-14
7/8-14
BU-8020-06-06
BU-8020-08-08
BU-8020-10-10
BU-8020-12-12
5/8-18
3/4-16
7/8-14
1.1/16-14
BU-8048-06-06
BU-8048-08-08
BU-8048-10-10
BU-8048-12-12
5/8-18
3/4-16
7/8-14
1.1/16-14
Adaptor 90 UNF female / UNF male
90 UNF female/ UNF male with R134 valve
90 UNF female/ UNF male with R12 valve
7065
7066
7067
code
thread 1
[inch]
thread 2
[inch]
code
thread 1
[inch]
thread 2
[inch]
code
thread 1
[inch]
thread 2
[inch]
BU-7065-06-06
BU-7065-08-08
BU-7065-10-10
5/8-18
3/4-16
7/8-14
5/8-18
3/4-16
7/8-14
BU-7066-10-08
BU-7066-10-10
1-14
1-14
3/4-16
7/8-14
BU-7067-10-08
BU-7067-10-10
1-14
1-14
3/4-16
7/8-14
294

Retrofit adaptor R12/R134A - protection caps - R134A valve
7034/35/36
code
BU-7034
BU-7035
BU-7036
-
thread
size
[inch]
3/8-24
7/16-20
7/16-20
-
O-ring R12/R134A
7037
7038
D
[mm]
code
for adaptor
code
O.D.
[mm]
thickness
[mm]
16
13
16
-
BU-7037
BU-7038
BU-7039
-
BU-7034/7036
BU-7035
BU-7035
-
BU-7028-06
BU-7028-08
BU-7028-10
BU-7028-12
7,65
10,82
14,00
17,17
1,78
1,78
1,78
1,78
Quick release coupling for Freon with a male UNF thread - coupling
7039
Quick release coupling for Freon with a male UNF thread - plug
7037
code
BU-24421-06
BU-24421-08
BU-24421-10
BU-24421-12
thread
size
[inch]
5/8-18
3/4-16
7/8-14
1.1/16-14
7028
7039
fitting
connection
size
-6
-8
- 10
- 12
code
BU-24422-06
BU-24422-08
BU-24422-10
BU-24422-12
thread
size
[inch]
5/8-18
3/4-16
7/8-14
1.1/16-14
fitting
connection
size
-6
-8
- 10
- 12
295
INDUSTRIAL HOSES - compensators

In any pipeline exposed to temperature variations, vibrations, assembly stress, external impact and deformations, it
is necessary to insert flexible parts such as hoses or expansion joints (compensators) in order to absorb movements
of an installation. Bellow expansion joints can be installed in steam, water, gas, air, oil, chemicals, food and dry
products pipelines.
Expansion joints are usually used to:
- accommodate thermal expansion of the pipeline,
- reduce stress in the pipeline
- absorb vibrations and dampen noise,
- facilitate pipeline installation and assembly of couplings and valves
Compensators are usually classified according to the kind of material the bellow (the basic part of all expansion
joints with bellows) is made of:
- rubber expansion joints: the bellow is made of rubber reinforced with synthetic or steel cord (the kind of rubber
depends on the working conditions of the compensator, medium, temperature, etc.), working temperature usually
ranges up to +90C (optionally up to +130C),
- steel expansion joints: the bellow is made of AISI 321 acid resistant steel, steel compensators resistant to high
temperature, corrosion and aggressive chemicals. Characterized by good mechanical characteristics and high
fatigue strength.
- PTFE expansion joints: the bellow is made of annularly corrugated, thick-walled PTFE tube. They make a group
of flexible joints with the highest grade of chemical resistance.
- fabric expansion joints made of fibreglass fabric optionally coated with silicone or PTFE layer. High chemical
and temperature resistance. Designed to transfer exhaust fumes, gases, dust, and other fumes.
296

Rubber compensators
Working parameters of rubber expansion joints
The working parameters of rubber compensators given in the tables (working pressure, working temperature and
displacement) are the maximum values and they must not occur simultaneously. The working pressure applies to
the expansion joint working in the temperature of up to +50C. At elevated temperatures, it is required to reduce the
values given in the table regarding the maximum working pressure and displacement. The values of permissible
vacuum pressure given in the tables apply to the compensators without vacuum supporting rings. A stainless
steel ring can be fitted in the bellow of the rubber expansion joint if it is necessary. In that case the compensator
can operate in the conditions of vacuum pressure or even close to full vacuum. Please contact Sales or Technical
Department in the event of any doubts concerning permissible working parameters of the expansion joints in
particular application.
compensator type
E-RE, E-CR, E-GR, E-YE,

E-YL, E VITON, E-WH
E-LPG
E-RP
E-RX
E-YS
115 EPDM, 115NBR
T-EPDM, T-NBR, 1504
working
temperature
displacement
+50C
+70C
+100C
+50C
+70C
+100C
+50C
+70C
+100C
+70C
+100C
+130C
+60C
+100C
+50C
+70C
+90C
+30C
+50C
+80C
+100C
100%
80%
60%
100%
80%
60%
100%
80%
60%
100%
75%
50%
100%
60%
100%
80%
60%
100%
100%
80%
60%
bellow maximum working pressure

[bar]
PN10
10
8
6
10
8
6
10
7,5
5
10
6
10
8
6
10 (7*)
8 (6*)
2,5 (2*)
0 (0*)
PN16
16
12
10
16
12
8
16
10
16
12
10
-
PN25
25
20
15
-
* - diameters DN 300 D N600
Installation of rubber compensators

Rubber expansion joints are supplied as ready-to-use solutions. The compensators should not be covered and
be accessible to regular maintenance. Rubber parts must not be covered with paint. During any welding work
the bellow has to be covered up to protect it against high temperature and sparks. Permissible displacement,
temperature, pressure and quality of rubber should be examined before installation. The pipes should be fixed to
a base to eliminate any forces resulting from internal pipe pressure. To utilize the permissible displacement the
distance between two pipe anchor points should be the same as the length of the compensator.
fig. 1
fig. 2
fig. 3
fig. 4
fig. 5
fig. 6
297

Rubber compensators
Joining screws should be fixed with their heads facing rubber bellow to allow displacements given in technical
specifications. If it is not possible, threaded screws should not protrude more than 2 3 mm, to avoid damage of
the bellow. Nuts should be tightened up one after another diagonally during mounting and again after installation
start-up. If the screws and nuts are tightened up too hard, the seal can be crushed.
For safety reasons as well as to ensure the longest service life of an expansion joint, counter flanges have to be
mounted properly (fig. 1 6).
The seal of a counter flange has to be smooth and cover most of rubber surface (at least 60%) so as to provide right
sealing (fig. 1). The compensators with full rubber flanges demand full and perfectly smooth counter flanges (fig. 5).
-
-
-
-
-
-
fig. 1 - flange with smooth seal,

fig. 2 - grooved and recess flanges must not be used, they damage rubber,
fig. 3 - flange with plane seal in order to protect rubber surface,
fig. 4 - sharp edges of the pipe can damage rubber surface,
fig. 5 - full rubber flanges require full counter flanges to obtain proper sealing,
fig. 6 - counter flange with a pad can both damage rubber surface and prevent tight contact.
Never cover rubber parts of a compensator with any paint or lubricant.

During any welding work the bellow has to be covered up to protect it against high temperature and spatter.
Before installation:
- remove dust and any foreign material that entered a compensator,
- a compensator should be secured against accidental or deliberate damage,
- any oil or lubricant must not fall on a compensator.
During start-up:
- check, if there is any leakage,
- if there is a need, check expansion limiters.
During service:
- a compensator must be easily accessible, not covered with any insulating material or paint,
- as soon as compensators start to work, it is essential to be sure its movements do not exceed permissible limits.
Maintenance:
- any kind of changes in the outer layer may indicate serious deformation,
- check screws tightening,
- check the range of compensator movements, that should be within permissible limits.
NOTE!
- the working parameters of compensators listed in the tables are the maximum values and must not occur
simultaneously,
- working pressure applies to the compensator operating in the temperature of +20C,
- the values of permissible vacuum pressure given in the tables apply to the rubber compensators without vacuum
supporting rings. A stainless steel ring can be fitted in the bellow of the rubber compensator if it is necessary.
In that case the expansion joint can operate in the conditions of vacuum pressure or even close to full vacuum.
- the permissible displacement values given in the tables apply to the compensators operating in the temperature
of up to +50C.
298

Rubber compensators
T - EPDM
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
EPDM rubber
Nylon cord
EPDM rubber
Galvanised carbon steel
Up to +100C
(depending on the medium)
Characteristics: Designed for installations transferring hot and cold water, cooling water with water treatment
additives, drinking water, industrial water, chlorine solutions, glycols, acids, whitewash, esters,
ketones, seawater. Not suitable for fluids with oil content. PZH (National Institute of Hygiene,
Poland) certificate for contact with drinking water.
code
I.D.
[mm]
TG-T-EPDM-032
TG-T-EPDM-040
TG-T-EPDM-050
TG-T-EPDM-065
TG-T-EPDM-080
TG-T-EPDM-100
TG-T-EPDM-125
TG-T-EPDM-150
TG-T-EPDM-200
TG-T-EPDM-250
TG-T-EPDM-300
TG-T-EPDM-350
TG-T-EPDM-400
TG-T-EPDM-450
TG-T-EPDM-500
TG-T-EPDM-600
32
40
50
65
80
100
125
150
200
250
300
350
400
450
500
600
DIN 2501
flange
PN
10/16
10/16
10/16
10/16
10/16
10/16
10/16
10/16
10
10
10
10
10
10
10
10
length
[mm]
95
95
105
115
130
135
170
180
205
240
260
265
265
265
265
265
axial
movement
[ mm]
4/8
4/8
5/8
6/12
6/12
10/18
10/18
10/18
14/25
14/25
14/25
16/25
16/25
16/25
16/25
16/25
T - NBR
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
lateral
movement
[mm]
8
8
8
10
10
12
12
12
22
22
22
22
22
22
22
22
angular
movement
[degrees]
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
10
7
7
7
7
7
7
NBR rubber
Nylon cord
NBR rubber
Up to +80C
Characteristics: Designed for installations transferring mineral oils, vegetable or animal fats, aerosol oils, water
with anti-corrosion additives.
code
I.D.
[mm]
TG-T-NBR-032
TG-T-NBR-040
TG-T-NBR-050
TG-T-NBR-065
TG-T-NBR-080
TG-T-NBR-100
TG-T-NBR-125
TG-T-NBR-150
TG-T-NBR-200
32
40
50
65
80
100
125
150
200
DIN 2501
flange
PN
10/16
10/16
10/16
10/16
10/16
10/16
10/16
10/16
10
length
[mm]
95
95
105
115
130
135
170
180
205
axial
movement
[ mm]
4/8
4/8
5/8
6/12
6/12
10/18
10/18
10/18
14/25
lateral
movement
[mm]
8
8
8
10
10
12
12
12
22
angular
movement
[degrees]
10
10
10
10
10
10
10
10
10
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
299

115 EPDM
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
EPDM rubber
Nylon cord
EPDM rubber
From -30C up to +90C
Characteristics: Designed for installations transferring hot and cold water, water with water treatment additives,
industrial water, seawater, glycols, weak acids, bases, esters and ketones. Not suitable for
fluids with oil content. BV (Bureau Veritas) Certificate.
code
I.D.
[mm]
TG-115E-032
TG-115E-040
TG-115E-050
TG-115E-065
TG-115E-080
TG-115E-100
TG-115E-125
TG-115E-150
TG-115E-200
TG-115E-250
TG-115E-300
TG-101E-350
TG-101E-400
TG-101E-450
TG-101E-500
TG-100E-600
32
40
50
65
80
100
125
150
200
250
300
350
400
450
500
600
DIN 2501
flange
PN
10/16
10/16
10/16
10/16
10/16
10/16
10/16
10/16
10
10
10
10
10
10
10
10
length
[mm]
130
130
130
130
130
130
130
130
130
130
130
200
200
200
200
265
axial
movement
[ mm]
12/20
12/20
12/20
12/20
12/20
12/20
12/20
12/20
12/25
16/25
16/25
16/25
16/25
16/25
16/25
16/25
lateral
movement
[mm]
14
14
14
14
14
14
14
14
14
22
22
22
22
22
22
22
115 NBR
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
angular
movement
[degrees]
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
15
working
pressure
[bar]
16
16
16
16
16
16
16
16
10
10
10
10
10
10
10
10
vacuum
[bar]
0,88
0,88
0,88
0,88
0,88
0,88
0,88
0,88
0,88
0,88
0,88
0,88
0,88
0,88
0,88
0,88
NBR rubber
Nylon cord
CR rubber
Characteristics: Designed for installations transferring mineral oils, vegetable or animal fats, aerosol oils, water
with anti-corrosion additives.
code
I.D.
[mm]
TG-115N-032
TG-115N-040
TG-115N-050
TG-115N-065
TG-115N-080
TG-115N-100
TG-115N-125
TG-115N-150
TG-115N-200
TG-115N-250
TG-115N-300
32
40
50
65
80
100
125
150
200
250
300
300
DIN 2501
flange
PN
10/16
10/16
10/16
10/16
10/16
10/16
10/16
10/16
10
10
10
length
[mm]
130
130
130
130
130
130
130
130
130
130
130
axial
movement
[ mm]
12/20
12/20
12/20
12/20
12/20
12/20
12/20
12/20
12/25
16/25
16/25
lateral
movement
[mm]
14
14
14
14
14
14
14
14
14
22
22
angular
movement
[degrees]
15
15
15
15
15
15
15
15
15
15
15
working
pressure
[bar]
16
16
16
16
16
16
16
16
10
10
10
vacuum
[bar]
0,88
0,88
0,88
0,88
0,88
0,88
0,88
0,88
0,88
0,88
0,88

Rubber compensators
1504
Internal layer:
Reinforcement:
External layer:
Connections:
Working temp.:
EPDM rubber
Nylon cord
EPDM rubber
BSP male thread, cast iron, zinc-plated
Characteristics: Designed to absorb vibration and linear or angular displacement in water installation. Not
suitable for fluids with oil content. PZH (National Institute of Hygiene, Poland) certificate for
contact with drinking water.
code
TG-1504-E-15
TG-1504-E-20
TG-1504-E-25
TG-1504-E-32
TG-1504-E-38
TG-1504-E-50
TG-1504-E-65
TG-1504-E-75
nominal
diameter
[mm]
15
20
25
32
38
50
65
75
thread
size
[inch]
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
length
[mm]
200
200
200
200
200
200
220
220
compression expansion
[mm]
[mm]
22
22
22
22
22
22
22
22
6
6
6
6
6
6
6
6
E - RP
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
lateral
movement
[mm]
22
22
22
22
22
22
22
22
angular
movement
[degrees]
45
45
45
45
45
45
45
45
working
pressure
[bar]
10
10
10
10
10
10
10
10
Butyl rubber (IIR) / EPDM

Nylon cord
EPDM rubber
From -40C to +90C
(with peaks up to +120C depending
on the medium)
Characteristics: Intended for sanitary installations, cold or hot water, swimming pool water, seawater and drinking
water. Not suitable for mineral oils, cooling water with oil-based anti-corrosion additives, oily
air and any installation where the constant working pressure exceeds 10 bar. Marked with a
single red dot on a bellow.
code
I.D.
[mm]
TG-E-RP-025
TG-E-RP-032
TG-E-RP-040
TG-E-RP-050
TG-E-RP-065
TG-E-RP-080
TG-E-RP-100
TG-E-RP-125
TG-E-RP-150
25
32
40
50
65
80
100
125
150
DIN 2501
flange
PN
10
10
10
10
10
10
10
10
10
length
[mm]
130
130
130
130
130
130
130
130
130
axial
movement
[ mm]
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
lateral
angular
movement movement
[ mm]
[ degrees]
30
30
30
30
30
30
30
30
30
30
30
30
30
20
30
20
30
20
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
vacuum
[bar]
0,3
0,3
0,3
0,3
0,3
0,2
0,2
0,2
0,1
301

Rubber compensators
E - CR
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
CR rubber
Nylon cord
CR rubber
From -25C to +90C
on the medium)
Characteristics: Designed for installations transferring hot and cold water (not drinking water), seawater, cooling
water with water treatment additives, municipal sewage, oily water, compressed air (not hot). Not
suitable for heating oil, diesel, petrol or other petrochemical products, acids and bases. Marked
with CR letters on a bellow, no stripe.
code
I.D.
[mm]
TG-E-CR-025
TG-E-CR-032
TG-E-CR-040
TG-E-CR-050
TG-E-CR-065
TG-E-CR-080
TG-E-CR-100
TG-E-CR-125
TG-E-CR-150
TG-E-CR-200
TG-E-CR-250
TG-E-CR-300
25
32
40
50
65
80
100
125
150
200
250
300
DIN 2501
flange
PN
16
16
16
16
16
16
16
16
16
10
10
10
length
[mm]
130
130
130
130
130
130
130
130
130
130
130
130
axial
movement
[ mm]
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
30/25
30/10
30/10
angular
lateral
movement movement
[ degrees]
[ mm]
30
30
30
30
30
30
30
30
30
30
30
30
30
20
30
20
30
20
30
10
15
5
15
5
E - RE
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
working
pressure
[bar]
16
16
16
16
16
16
16
16
16
10
10
10
vacuum
[bar]
1
1
1
1
0,7
0,6
0,4
0,3
0,3
0,3
0,2
0,1
Butyl rubber (IIR) / EPDM

Nylon cord
EPDM rubber
From -40C to +100C
on the medium)
Characteristics: Designed for installations transferring water, seawater, cooling water with water treatment
additives, drinking water, low concentration acids and bases, solutions of salts, esters and
ketones. Not suitable for mineral oils, cooling water with oil-based anti-corrosion additives, oily
air. Marked with a single red stripe on a bellow.
code
I.D.
[mm]
TG-E-RE-025
TG-E-RE-032
TG-E-RE-040
TG-E-RE-050
TG-E-RE-065
TG-E-RE-080
TG-E-RE-100
TG-E-RE-125
TG-E-RE-150
TG-E-RE-200
TG-E-RE-250
TG-E-RE-300
25
32
40
50
65
80
100
125
150
200
250
300
302
DIN 2501
flange
PN
16
16
16
16
16
16
16
16
16
10
10
10
length
[mm]
130
130
130
130
130
130
130
130
130
130
130
130
axial
movement
[ mm]
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
30/25
30/10
30/10
lateral
angular
movement movement
[ mm]
[ degrees]
30
30
30
30
30
30
30
30
30
30
30
30
30
20
30
20
30
20
30
10
15
5
15
5
working
pressure
[bar]
16
16
16
16
16
16
16
16
16
10
10
10
vacuum
[bar]
1
1
1
1
0,7
0,6
0,4
0,3
0,3
0,3
0,2
0,1

Rubber compensators
E - YE
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
NBR rubber
Nylon cord
CR rubber
on the medium)
Characteristics: Designed for installations conveying petrochemical products with aromatic content up to 50%,
oily air, natural gas (not LPG), oily water, cooling water with anti-corrosion additives. Marked
with a single yellow stripe on a bellow.
code
I.D.
[mm]
TG-E-YE-025
TG-E-YE-032
TG-E-YE-040
TG-E-YE-050
TG-E-YE-065
TG-E-YE-080
TG-E-YE-100
TG-E-YE-125
TG-E-YE-150
TG-E-YE-200
TG-E-YE-250
TG-E-YE-300
25
32
40
50
65
80
100
125
150
200
250
300
DIN 2501
flange
PN
16
16
16
16
16
16
16
16
16
10
10
10
length
[mm]
130
130
130
130
130
130
130
130
130
130
130
130
axial
movement
[ mm]
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
30/25
30/10
30/10
lateral
angular
movement movement
[ mm]
[ degrees]
30
30
30
30
30
30
30
30
30
30
30
30
30
20
30
20
30
20
30
10
15
5
15
5
E - YL
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
working
pressure
[bar]
16
16
16
16
16
16
16
16
16
10
10
10
vacuum
[bar]
1
1
1
1
0,7
0,6
0,4
0,3
0,3
0,3
0,2
0,1
NBR rubber
Nylon cord
CR rubber
on the medium)
Characteristics: Designed for installations conveying petrochemical products, petrol, diesel, heating oil, JET A1
jet fuel, kerosene. Marked with a single yellow stripe and white LT letters on a bellow.
code
I.D.
[mm]
TG-E-YL-025
TG-E-YL-032
TG-E-YL-040
TG-E-YL-050
TG-E-YL-065
TG-E-YL-080
TG-E-YL-100
TG-E-YL-125
TG-E-YL-150
TG-E-YL-200
TG-E-YL-250
TG-E-YL-300
25
32
40
50
65
80
100
125
150
200
250
300
DIN 2501
flange
PN
16
16
16
16
16
16
16
16
16
10
10
10
length
[mm]
130
130
130
130
130
130
130
130
130
130
130
130
axial
movement
[ mm]
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
30/25
30/10
30/10
lateral
angular
movement movement
[ mm]
[ degrees]
30
30
30
30
30
30
30
30
30
30
30
30
30
20
30
20
30
20
30
10
15
5
15
5
working
pressure
[bar]
16
16
16
16
16
16
16
16
16
10
10
10
vacuum
[bar]
1
1
1
1
0,7
0,6
0,4
0,3
0,3
0,3
0,2
0,1
303

Rubber compensators
E - GR
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
CSM rubber (Hypalon)

Nylon cord
CSM rubber (Hypalon)
on the medium)
Characteristics: Intended for installations conveying chemical or petrochemical products with aromatic content
up to 50%, acids, bases, oily air (to +90C), natural gas (not LPG), oily water, cooling water
with anti-corrosion additives. Marked with a single green stripe on a bellow.
code
I.D.
[mm]
TG-E-GR-025
TG-E-GR-032
TG-E-GR-040
TG-E-GR-050
TG-E-GR-065
TG-E-GR-080
TG-E-GR-100
TG-E-GR-125
TG-E-GR-150
TG-E-GR-200
TG-E-GR-250
TG-E-GR-300
25
32
40
50
65
80
100
125
150
200
250
300
DIN 2501
flange
PN
16
16
16
16
16
16
16
16
16
10
10
10
length
[mm]
130
130
130
130
130
130
130
130
130
130
130
130
axial
movement
[ mm]
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
30/25
30/10
30/10
angular
lateral
movement movement
[ degrees]
[ mm]
30
30
30
30
30
30
30
30
30
30
30
30
30
20
30
20
30
20
30
10
15
5
15
5
working
pressure
[bar]
16
16
16
16
16
16
16
16
16
10
10
10
vacuum
[bar]
1
1
1
1
0,7
0,6
0,4
0,3
0,3
0,3
0,2
0,1
E - WH
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
White NBR rubber

Nylon cord
CR rubber
on the medium)
Characteristics: Intended for installations conveying food products, also oil and fat containing foods. Not suitable
for drinking water. Marked with a single white stripe on a bellow.
code
I.D.
[mm]
TG-E-WH-025
TG-E-WH-032
TG-E-WH-040
TG-E-WH-050
TG-E-WH-065
TG-E-WH-080
TG-E-WH-100
TG-E-WH-125
TG-E-WH-150
TG-E-WH-200
TG-E-WH-250
TG-E-WH-300
25
32
40
50
65
80
100
125
150
200
250
300
304
DIN 2501
flange
PN
16
16
16
16
16
16
16
16
16
10
10
10
length
[mm]
130
130
130
130
130
130
130
130
130
130
130
130
axial
movement
[ mm]
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
30/25
30/10
30/10
lateral
angular
movement movement
[ mm]
[ degrees]
30
30
30
30
30
30
30
30
30
30
30
30
30
20
30
20
30
20
30
10
15
5
15
5
working
pressure
[bar]
16
16
16
16
16
16
16
16
16
10
10
10
vacuum
[bar]
1
1
1
1
0,7
0,6
0,4
0,3
0,3
0,3
0,2
0,1

Rubber compensators
E - RX
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
EPDM rubber
Polymer cord
EPDM rubber
on the medium)
Characteristics: Designed for installations conveying hot water, cooling water, hot air. Not suitable for mineral
oils, cooling water with oil-based anti-corrosion additives, oily air. Marked with a double red
stripe on a bellow.
code
I.D.
[mm]
TG-E-RX-025
TG-E-RX-032
TG-E-RX-040
TG-E-RX-050
TG-E-RX-065
TG-E-RX-080
TG-E-RX-100
TG-E-RX-125
TG-E-RX-150
TG-E-RX-200
TG-E-RX-250
TG-E-RX-300
25
32
40
50
65
80
100
125
150
200
250
300
DIN 2501
flange
PN
16
16
16
16
16
16
16
16
16
10
10
10
length
[mm]
130
130
130
130
130
130
130
130
130
130
130
130
axial
movement
[ mm]
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
30/25
30/10
30/10
lateral
angular
movement movement
[ mm]
[ degrees]
30
30
30
30
30
30
30
30
30
30
30
30
30
20
30
20
30
20
30
10
15
5
15
5
E - LPG
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
working
pressure
[bar]
16
16
16
16
16
16
16
16
16
10
10
10
vacuum
[bar]
1
1
1
1
0,7
0,6
0,4
0,3
0,3
0,3
0,2
0,1
Conductive NBR rubber

Nylon cord
Conductive CR rubber
on the medium)
Characteristics: Designed for application in tankers, fuel installations and petrol stations to transfer LPG (Liquid
Petroleum Gas) according to EN 589. Germanisher Lloyd Certificate. Available with ASA 300
flanges. Marked with a single orange stripe on a bellow. The parameters in the table below
apply to new compensators in the temperature of +20C.
code
I.D.
[mm]
TG-E-OR-025
TG-E-OR-032
TG-E-OR-040
TG-E-OR-050
TG-E-OR-065
TG-E-OR-080
TG-E-OR-100
25*
32
40
50
65
80
100
DIN 2635
flange
PN
40
40
40
40
40
40
40
length
[mm]
130
130
130
130
130
130
130
axial
movement
[ mm]
30
30
30
30
30
30
30
lateral
angular
movement movement
[ mm]
[ degrees]
30
30
30
30
30
30
30
30
30
30
30
30
30
30
working
pressure
[bar]
25
25
25
25
25
25
25
vacuum
[bar]
1
1
1
1
1
1
1
305

Rubber compensators
E - VITON
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
FPM (Viton)
Rubber-coated Nylon cord
Conductive ECO rubber
on the medium)
Characteristics: Designed for chemical and petrochemical installations, sulphur removal, application in power
plants, etc. Extremely resistant to the influence of hot oils, benzene, xylene, products with
aromatic content up to 50%, biodiesel and other aggressive media. Marked with a white-greenwhite stripe on a bellow.
code
I.D.
[mm]
TG-E-VI-025
TG-E-VI-032
TG-E-VI-040
TG-E-VI-050
TG-E-VI-065
TG-E-VI-080
TG-E-VI-100
TG-E-VI-125
TG-E-VI-150
TG-E-VI-200
25*
32
40
50
65
80
100
125
150
200
DIN 2501
flange
PN
16
16
16
16
16
16
16
16
16
10
length
[mm]
130
130
130
130
130
130
130
130
130
130
axial
movement
[ mm]
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
20/30
30/25
lateral
angular
movement movement
[ mm]
[ degrees]
30
30
30
30
30
30
30
30
30
30
30
30
30
20
30
20
30
20
30
10
E - YS
Internal layer:
Reinforcement:
External layer:
Flanges:
Working temp.:
working
pressure
[bar]
16
16
16
16
16
16
16
16
16
10
vacuum
[bar]
1
1
1
1
0,7
0,6
0,4
0,3
0,3
0,3
HNBR rubber
Steel cord
CR rubber
on the medium)
Characteristics: Intended for installations conveying chemical or petrochemical products with aromatic content
up to 50%, cooling water with oil-based anti-corrosion additives, lubricating and hydraulic oil,
seawater. Marked with a yellow-blue-yellow stripe on a bellow.
code
I.D.
[mm]
TG-E-YS-025
TG-E-YS-032
TG-E-YS-040
TG-E-YS-050
TG-E-YS-065
TG-E-YS-080
TG-E-YS-100
TG-E-YS-125
TG-E-YS-150
TG-E-YS-200
TG-E-YS-250
TG-E-YS-300
25
32
40
50
65
80
100
125
150
200
250
300
306
DIN 2501
flange
PN
16
16
16
16
16
16
16
16
16
10
10
10
length
[mm]
130
130
130
130
130
130
130
130
130
130
130
130
axial
movement
[ mm]
15/30
15/30
15/30
15/30
15/30
15/30
15/30
15/30
15/30
20/15
20/15
20/15
lateral
angular
movement movement
[ mm]
[ degrees]
15
20
15
20
15
20
15
20
15
20
15
20
15
15
15
15
15
15
10
5
10
5
10
5
working
pressure
[bar]
16
16
16
16
16
16
16
16
16
10
10
10
vacuum
[bar]
1
1
1
1
1
1
0,8
0,7
0,7
0,7
0,7
0,6

Steel compensators
Steel compensators are designed to absorb a particular amount of displacement of the pipeline according to
specified working conditions and size. In order to obtain the maximum service life in the conditions of working
pressure follow the recommendations listed below:
Before installation
Check if the compensator delivered to the installation spot has not been damaged during shipment. Any damage
caused to the steel bellow may severely shorten service life of the compensator. Only if the assembly of installation
is completed, the compensator can be fitted into position. It applies to pipe supports or moving props of the piping
system in particular.
The compensator must not be used as a pipeline support neither carry its load. No torsion or rotation - an outcome
of stress occurring in the pipeline during installation or service must be imposed on the compensator.
During installation
No mechanical impact e.g. heavy blow should be imposed on a compensator. It is unacceptable to drop the
compensator on hard surface. Do not use rope or chain directly on the bellow to lift the compensator during
installation. The compensators with internal sleeves should be installed pointing the flow direction. It is essential
to maintain the alignment of the compensator with the pipeline during installation.
Nuts of compensators with flanges should be tightened up one after another diagonally in several attempts. The space
left for the compensator in the pipeline must be exactly the same as the length required to install the compensator.
After installation
Remove all shipping bars and other devices employed to keep the initial stress of the compensator (if there were
any). Check if the compensator has not been damaged during shipment. No foreign material can be trapped
between the corrugations of the bellow. Check if all pipe guides and supports are adequate before pressure test
of the installation. Never exceed the maximum working pressure. If the pipeline is covered with insulating coating,
do not allow the material of the coating to enter the corrugation of the bellow.
During service
Working pressure and displacement of the compensator shall never exceed the permissible values. It is crucial to
avoid pressure jumps caused either by faulty equipment or its malfunction. If the working conditions of installations
such as pressure or temperature change it is recommended to re-examine the adequacy of the compensator for
these modified working conditions.
Maintenance
Steel compensators are virtually maintenance-free. They only require periodic visual inspection during service.
In case of any malfunction - leakage, cracks, signs of corrosion or damage of steel bellows in particular, the
compensator must be replaced with a new one. Steel compensators are unrecoverable.
Temperature correction factor for steel compensators

The working parameters of steel compensators given in the tables are for the maximum working pressure of each
particular type: 2.5 - 10 - 16 bar and for the temperature of +120C.
In order to calculate the maximum working pressure for working temperature other than the one specified in the
parameters, use the correction factors given in the table below.
working temperature [C]
correction factor
20
50
100
120
150
200
250
300
350
400
450
500
550
1,183 1,095 1,026 1,000 0,962 0,912 0,863 0,823 0,794 0,769 0,750 0,735 0,725
307

Steel compensators
AX1T - PN 16
AX1SU-16:
AX1FU-16:
AX1BU-16:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
EN 1092-1 fixed flanges
EN 1092-1 swivel flanges
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 16 bar
(apply the temperature correction
factor for temperatures above +120C)
Axial compensators designed for application in pipelines to compensate axial and lateral movements. Stainless
steel ends and compensators longer than standard are available on request.
AX1SU-16 type
AX1FU-16 type
code
nominal
diameter
[mm]
angular
movement
[mm]
BMT-AX1SU-16-0040-16
BMT-AX1SU-16-0050-22
BMT-AX1SU-16-0065-24
BMT-AX1SU-16-0080-22
BMT-AX1SU-16-0100-30
BMT-AX1SU-16-0125-38
BMT-AX1SU-16-0150-38
BMT-AX1SU-16-0200-56
BMT-AX1SU-16-0250-56
BMT-AX1SU-16-0300-58
BMT-AX1FU-16-0040-16
BMT-AX1FU-16-0050-22
BMT-AX1FU-16-0065-24
BMT-AX1FU-16-0080-22
BMT-AX1FU-16-0100-30
BMT-AX1FU-16-0125-38
BMT-AX1FU-16-0150-38
BMT-AX1FU-16-0200-56
BMT-AX1FU-16-0250-56
BMT-AX1FU-16-0300-58
BMT-AX1BU-16-0040-16
BMT-AX1BU-16-0050-22
BMT-AX1BU-16-0065-24
BMT-AX1BU-16-0080-22
BMT-AX1BU-16-0100-30
BMT-AX1BU-16-0125-38
BMT-AX1BU-16-0150-38
BMT-AX1BU-16-0200-56
BMT-AX1BU-16-0250-56
BMT-AX1BU-16-0300-58
DN 40
DN 50
DN 65
DN 80
DN 100
DN 125
DN 150
DN 200
DN 250
DN 300
DN 40
DN 50
DN 65
DN 80
DN 100
DN 125
DN 150
DN 200
DN 250
DN 300
DN 40
DN 50
DN 65
DN 80
DN 100
DN 125
DN 150
DN 200
DN 250
DN 300
16
22
24
22
30
38
38
56
56
58
16
22
24
22
30
38
38
56
56
58
16
22
24
22
30
38
38
56
56
58
308
AX1BU-16 type
elasticity
[N/mm]
axial
132,1
88,1
99,9
188,6
134,5
174,5
293,9
249,2
298,2
398,2
132,1
88,1
99,9
188,6
134,5
174,5
293,9
249,2
298,2
398,2
132,1
88,1
99,9
188,6
134,5
174,5
293,9
249,2
298,2
398,2
lateral
107,3
84,3
154,8
313,6
374
888,4
1163,6
1199,5
2186,6
3751,7
107,3
84,3
154,8
313,6
374
888,4
1163,6
1199,5
2186,6
3751,7
107,3
84,3
154,8
313,6
374
888,4
1163,6
1199,5
2186,6
3751,7
Ln
N x d2
180
190
190
200
205
195
230
255
255
255
110
120
120
140
145
135
170
190
200
205
180
190
190
200
210
200
245
275
285
295
48,3
60,3
76,1
88,9
114,3
139,7
168,3
219,1
273
323,9
150
165
185
200
220
250
285
340
405
460
150
165
185
200
220
250
285
340
405
460
110
125
145
160
180
188
212
268
355
410
110
125
145
160
180
188
212
268
355
410
4 x18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 18
8 x 22
12 x 22
12 x 26
12 x 26
4 x18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 18
8 x 22
12 x 22
12 x 26
12 x 26

Steel compensators
UN1 - PN 2,5
UN1SU-03:
UN1FU-03:
UN1BU-03:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
Fixed flanges according to DIN 86044
Swivel flanges according to DIN 86044
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 2,5 bar
(apply the temperature correction factor
for temperatures above +120C)
General purpose compensators designed for application in pipelines to compensate axial and lateral movements.
UN1SU-03 type
code
nominal
diameter
[mm]
BM-UN1SU-03-0040-015-0
BM-UN1SU-03-0050-016-0
BM-UN1SU-03-0065-016-0
BM-UN1SU-03-0080-019-0
BM-UN1SU-03-0100-018-0
BM-UN1SU-03-0125-016-0
BM-UN1SU-03-0150-023-0
BM-UN1SU-03-0175-022-0
BM-UN1SU-03-0200-025-0
BM-UN1SU-03-0250-024-0
BM-UN1SU-03-0300-025-0
BM-UN1FU-03-0040-015-0
BM-UN1FU-03-0050-016-0
BM-UN1FU-03-0065-016-0
BM-UN1FU-03-0080-019-0
BM-UN1FU-03-0100-018-0
BM-UN1FU-03-0125-016-0
BM-UN1FU-03-0150-023-0
BM-UN1FU-03-0175-022-0
BM-UN1FU-03-0200-025-0
BM-UN1FU-03-0250-024-0
BM-UN1FU-03-0300-025-0
BM-UN1BU-03-0040-015-0
BM-UN1BU-03-0050-016-0
BM-UN1BU-03-0065-016-0
BM-UN1BU-03-0080-019-0
BM-UN1BU-03-0100-018-0
BM-UN1BU-03-0125-016-0
BM-UN1BU-03-0150-023-0
BM-UN1BU-03-0175-022-0
BM-UN1BU-03-0200-025-0
BM-UN1BU-03-0250-024-0
BM-UN1BU-03-0300-025-0
DN 40
DN 50
DN 65
DN 80
DN 100
DN 125
DN 150
DN 175
DN 200
DN 250
DN 300
DN 40
DN 50
DN 65
DN 80
DN 100
DN 125
DN 150
DN 175
DN 200
DN 250
DN 300
DN 40
DN 50
DN 65
DN 80
DN 100
DN 125
DN 150
DN 175
DN 200
DN 250
DN 300
UN1FU-03 type
movement
[mm]
axial
lateral
15
9
16
8
16
5
19
6
18
3
16
2,5
23
4
22
3,5
25
3,5
24
2,7
25
2,5
15
9
16
8
16
5
19
6
18
3
16
2,5
23
4
22
3,5
25
3,5
24
2,7
25
2,5
15
9
16
8
16
5
19
6
18
3
16
2,5
23
4
22
3,5
25
3,5
24
2,7
25
2,5
elasticity
[N/mm]
axial
lateral
69
27
77
46
81
127
76
76
73
330
148
966
127
624
139
907
128
1054
155
1970
155
2793
69
27
77
46
81
127
76
76
73
330
148
966
127
624
139
907
128
1054
155
1970
155
2793
69
27
77
46
81
127
76
76
73
330
148
966
127
624
139
907
128
1054
155
1970
155
2793
UN1BU-03 type
Ln
N x d2
175
175
155
170
145
150
195
195
195
195
235
125
130
110
130
105
115
140
145
125
125
125
125
130
110
130
105
115
140
145
125
125
125
48,3
60,3
76,1
88,9
114,3
139,7
168,3
193,7
219,1
273
323,9
150
165
185
200
220
250
285
315
320
375
440
150
165
185
200
220
250
285
315
320
375
440
110
125
145
160
180
210
240
270
280
335
395
110
125
145
160
180
210
240
270
280
335
395
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
8 x 18
12 x 18
12 x 22
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
8 x 18
12 x 18
12 x 22
309

Steel compensators
US1 - PN 2,5
US1SU-03:
US1FU-03:
US1BU-03:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 2,5 bar
Compensators designed for application in exhaust fumes systems to compensate axial and lateral movements.
US1SU-03 type
code
nominal
diameter
[mm]
BM-US1SU-03-0040-015-0
BM-US1SU-03-0050-016-0
BM-US1SU-03-0065-016-0
BM-US1SU-03-0080-019-0
BM-US1SU-03-0100-018-0
BM-US1SU-03-0125-016-0
BM-US1SU-03-0150-023-0
BM-US1SU-03-0175-022-0
BM-US1SU-03-0200-025-0
BM-US1SU-03-0250-024-0
BM-US1SU-03-0300-025-0
BM-US1FU-03-0040-015-0
BM-US1FU-03-0050-016-0
BM-US1FU-03-0065-016-0
BM-US1FU-03-0080-019-0
BM-US1FU-03-0100-018-0
BM-US1FU-03-0125-016-0
BM-US1FU-03-0150-023-0
BM-US1FU-03-0175-022-0
BM-US1FU-03-0200-025-0
BM-US1FU-03-0250-024-0
BM-US1FU-03-0300-025-0
BM-US1BU-03-0040-015-0
BM-US1BU-03-0050-016-0
BM-US1BU-03-0065-016-0
BM-US1BU-03-0080-019-0
BM-US1BU-03-0100-018-0
BM-US1BU-03-0125-016-0
BM-US1BU-03-0150-023-0
BM-US1BU-03-0175-022-0
BM-US1BU-03-0200-025-0
BM-US1BU-03-0250-024-0
BM-US1BU-03-0300-025-0
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
310
movement
[mm]
axial
lateral
15
9
16
8
16
5
19
6
18
3
16
2,5
23
4
22
3,5
25
3,5
24
2,7
25
2,5
15
9
16
8
16
5
19
6
18
3
16
2,5
23
4
22
3,5
25
3,5
24
2,7
25
2,5
15
9
16
8
16
5
19
6
18
3
16
2,5
23
4
22
3,5
25
3,5
24
2,7
25
2,5
US1FU-03 type
elasticity
[N/mm]
axial
lateral
69
27
77
46
81
127
76
76
73
330
148
966
127
624
139
907
128
1054
155
1970
155
2793
69
27
77
46
81
127
76
76
73
330
148
966
127
624
139
907
128
1054
155
1970
155
2793
69
27
77
46
81
127
76
76
73
330
148
966
127
624
139
907
128
1054
155
1970
155
2793
US1BU-03 type
Ln
N x d2
175
175
155
170
145
150
195
195
195
195
235
125
130
110
130
105
115
140
145
125
125
125
125
130
110
130
105
115
140
145
125
125
125
48,3
60,3
76,1
88,9
114,3
139,7
168,3
193,7
219,1
273
323,9
150
165
185
200
220
250
285
315
320
375
440
150
165
185
200
220
250
285
315
320
375
440
110
125
145
160
180
210
240
270
280
335
395
110
125
145
160
180
210
240
270
280
335
395
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
8 x 18
12 x 18
12 x 22
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
8 x 18
12 x 18
12 x 22

Steel compensators
US2 - PN 2,5
US2SU-03:
US2FU-03:
US2BU-03:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 2,5 bar
US2SU-03 type
code
nominal
diameter
[mm]
BM-US2SU-03-0040-041-0
BM-US2SU-03-0050-038-0
BM-US2SU-03-0065-044-0
BM-US2SU-03-0080-048-0
BM-US2SU-03-0100-050-0
BM-US2SU-03-0125-055-0
BM-US2SU-03-0150-075-0
BM-US2SU-03-0175-075-0
BM-US2SU-03-0200-075-0
BM-US2SU-03-0250-075-0
BM-US2SU-03-0300-090-0
BM-US2FU-03-0040-043-0
BM-US2FU-03-0050-046-0
BM-US2FU-03-0065-058-0
BM-US2FU-03-0080-059-0
BM-US2FU-03-0100-066-0
BM-US2FU-03-0125-070-0
BM-US2FU-03-0150-080-0
BM-US2FU-03-0200-088-0
BM-US2FU-03-0250-084-0
BM-US2FU-03-0300-090-0
BM-US2BU-03-0040-043-0
BM-US2BU-03-0050-046-0
BM-US2BU-03-0065-058-0
BM-US2BU-03-0080-059-0
BM-US2BU-03-0100-066-0
BM-US2BU-03-0125-070-0
BM-US2BU-03-0150-080-0
BM-US2BU-03-0200-088-0
BM-US2BU-03-0250-084-0
BM-US2BU-03-0300-090-0
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN200
DN250
DN300
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN200
DN250
DN300
US2FU-03 type
movement
[mm]
axial
lateral
43
105
46
105
58
110
59
105
66
95
70
95
80
100
80
95
88
90
84
75
90
70
43
105
46
105
58
110
59
105
66
95
70
95
80
100
88
90
84
75
90
70
43
105
46
105
58
110
59
105
66
95
70
95
80
100
88
90
84
75
90
70
elasticity
[N/mm]
axial
lateral
24
1
27
1
22
1
25
1
20
2
34
5
35
6
39
9
36
11
43
20
43
28
24
1
27
1
22
1
25
1
20
2
34
5
35
6
36
11
43
20
43
28
24
1
27
1
22
1
25
1
20
2
34
5
35
6
36
11
43
20
43
28
US2BU-03 type
Ln
N x d2
480
480
475
485
435
490
545
545
545
545
585
430
435
430
445
395
455
490
475
475
475
430
435
430
445
395
455
490
475
475
475
48,3
60,3
76,1
88,9
114,3
139,7
168,3
193,7
219,1
273
323,9
150
165
185
200
220
250
285
320
375
440
150
165
185
200
220
250
285
320
375
440
110
125
145
160
180
210
240
280
335
395
110
125
145
160
180
210
240
280
335
395
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 18
12 x 18
12 x 22
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 18
12 x 18
12 x 22
311

Steel compensators
US3 - PN 2,5
US3SU-03:
US3FU-03:
US3BU-03:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 2,5 bar
US3SU-03 type
code
nominal
diameter
[mm]
BM-US3SU-03-0040-030-0
BM-US3SU-03-0050-032-0
BM-US3SU-03-0065-040-0
BM-US3SU-03-0080-038-0
BM-US3SU-03-0100-036-0
BM-US3SU-03-0125-032-0
BM-US3SU-03-0150-045-0
BM-US3SU-03-0175-044-0
BM-US3SU-03-0200-049-0
BM-US3SU-03-0250-047-0
BM-US3SU-03-0300-050-0
BM-US3FU-03-0040-030-0
BM-US3FU-03-0050-031-0
BM-US3FU-03-0065-054-0
BM-US3FU-03-0080-038-0
BM-US3FU-03-0100-036-0
BM-US3FU-03-0125-032-0
BM-US3FU-03-0150-045-0
BM-US3FU-03-0200-049-0
BM-US3FU-03-0250-047-0
BM-US3FU-03-0300-050-0
BM-US3BU-03-0040-030-0
BM-US3BU-03-0050-032-0
BM-US3BU-03-0065-054-0
BM-US3BU-03-0080-038-0
BM-US3BU-03-0100-036-0
BM-US3BU-03-0125-032-0
BM-US3BU-03-0150-045-0
BM-US3BU-03-0200-049-0
BM-US3BU-03-0250-047-0
BM-US3BU-03-0300-050-0
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN200
DN250
DN300
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN200
DN250
DN300
312
US3FU-03 type
movement
[mm]
axial
lateral
30
73
32
65
54
54
38
63
36
46
32
33
45
46
44
40
49
42
47
33
50
26
30
73
32
65
54
54
38
63
36
46
32
33
45
46
49
42
47
33
50
26
30
73
32
65
54
54
38
63
36
46
32
33
45
46
49
42
47
33
50
26
elasticity
N/mm]
axial
lateral
49
2
55
3
57
5
54
5
52
11
106
39
90
33
100
48
91
52
111
97
110
182
49
2
55
3
57
5
54
5
52
11
106
39
90
33
91
52
111
97
110
182
49
2
55
3
57
5
54
5
52
11
106
39
90
33
91
52
111
97
110
182
US3BU-03 type
Ln
N x d2
375
375
345
380
330
320
395
395
405
405
415
325
330
300
340
290
285
340
335
335
310
275
275
275
340
290
285
340
335
335
310
48,3
60,3
76,1
88,1
114,3
139,7
168,3
193,7
219,1
273
323,9
150
165
185
200
220
250
285
320
375
440
150
165
185
200
220
250
285
320
375
440
110
125
145
160
180
210
240
280
335
395
110
125
145
160
180
210
240
280
335
395
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 18
12 x 18
12 x 22
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 18
12 x 18
12 x 22

Steel compensators
AN1 H - PN 10
AN1SH-10:
AN1FH-10:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
Fixed flanges
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 10 bar
Compensators designed for application in pipelines to compensate angular movements.
AN1SH-10 type
code
BM-AN1SH-10-0040-015-0
BM-AN1SH-10-0050-015-0
BM-AN1SH-10-0065-015-0
BM-AN1SH-10-0080-015-0
BM-AN1SH-10-0100-015-0
BM-AN1SH-10-0125-015-0
BM-AN1SH-10-0150-015-0
BM-AN1SH-10-0175-014-0
BM-AN1SH-10-0200-014-0
BM-AN1SH-10-0250-010-0
BM-AN1SH-10-0300-009-0
BM-AN1FH-10-0040-015-0
BM-AN1FH-10-0050-015-0
BM-AN1FH-10-0065-015-0
BM-AN1FH-10-0080-015-0
BM-AN1FH-10-0100-015-0
BM-AN1FH-10-0125-015-0
BM-AN1FH-10-0150-015-0
BM-AN1FH-10-0175-014-0
BM-AN1FH-10-0200-014-0
BM-AN1FH-10-0250-010-0
BM-AN1FH-10-0300-009-0
nominal
diameter
[mm]
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
angular
movement
[deg]
15
15
15
15
15
15
15
14
14
10
9
15
15
15
15
15
15
15
14
14
10
9
AN1FH-10 type
angular
elasticity
[Nmm/deg]
1040
1780
2347
4705
7385
10537
17676
25723
30330
56715
119553
1040
1780
2347
4705
7385
10537
17676
25723
30330
56715
119553
Ln
N x d2
300
300
295
320
315
315
315
315
315
335
340
95
95
90
115
110
115
120
120
130
130
145
48,3
60,3
76,1
88,9
114,3
139,7
168,3
193,7
219,1
273
323,9
-
110
125
145
160
180
210
240
270
295
350
400
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
8 x 22
12 x 22
12 x 22
313

Steel compensators
AN1 K - PN 10
AN1SK-10:
AN1FK-10:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
Fixed flanges
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 10 bar
AN1SK-10 type
code
BM-AN1SK-10-0040-015-0
BM-AN1SK-10-0050-015-0
BM-AN1SK-10-0065-015-0
BM-AN1SK-10-0080-015-0
BM-AN1SK-10-0100-015-0
BM-AN1SK-10-0125-015-0
BM-AN1SK-10-0150-015-0
BM-AN1SK-10-0175-014-0
BM-AN1SK-10-0200-014-0
BM-AN1SK-10-0250-010-0
BM-AN1SK-10-0300-009-0
BM-AN1FK-10-0040-015-0
BM-AN1FK-10-0050-015-0
BM-AN1FK-10-0065-015-0
BM-AN1FK-10-0080-015-0
BM-AN1FK-10-0100-015-0
BM-AN1FK-10-0125-015-0
BM-AN1FK-10-0150-015-0
BM-AN1FK-10-0175-014-0
BM-AN1FK-10-0200-014-0
BM-AN1FK-10-0250-010-0
BM-AN1FK-10-0300-009-0
314
nominal
diameter
[mm]
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
angular
movement
[deg]
15
15
15
15
15
15
15
14
14
10
9
15
15
15
15
15
15
15
14
14
10
9
AN1FK-10 type
angular
elasticity
[Nmm/deg]
1040
1780
2347
4705
7385
10537
17676
25723
30330
56715
119553
1040
1780
2347
4705
7385
10537
17676
25723
30330
56715
119553
Ln
N x d2
300
300
295
320
315
310
315
315
315
335
340
95
95
90
115
110
115
120
120
130
130
145
48,3
60,3
76,1
88,9
114,3
139,7
168,3
193,7
219,1
273
323,9
-
110
125
145
160
180
210
240
270
295
350
400
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
8 x 22
12 x 22
12 x 22

Steel compensators
AX1 - PN 10
AX1SU-10:
AX1FU-10:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 10 bar
Axial compensators designed for application in pipelines to compensate axial and lateral movements.
AX1SU-10 type
code
nominal
diameter
[mm]
BM-AX1SU-10-0040-013-0
BM-AX1SU-10-0050-014-0
BM-AX1SU-10-0065-018-0
BM-AX1SU-10-0080-022-0
BM-AX1SU-10-0100-022-0
BM-AX1SU-10-0125-025-0
BM-AX1SU-10-0150-025-0
BM-AX1SU-10-0175-025-0
BM-AX1SU-10-0200-027-0
BM-AX1SU-10-0250-026-0
BM-AX1SU-10-0300-028-0
BM-AX1FU-10-0040-013-0
BM-AX1FU-10-0050-014-0
BM-AX1FU-10-0065-018-0
BM-AX1FU-10-0080-022-0
BM-AX1FU-10-0100-022-0
BM-AX1FU-10-0125-025-0
BM-AX1FU-10-0150-025-0
BM-AX1FU-10-0175-025-0
BM-AX1FU-10-0200-027-0
BM-AX1FU-10-0250-026-0
BM-AX1FU-10-0300-028-0
DN 40
DN 50
DN 65
DN 80
DN 100
DN 125
DN 150
DN 175
DN 200
DN 250
DN 300
DN 40
DN 50
DN 65
DN 80
DN 100
DN 125
DN 150
DN 175
DN 200
DN 250
DN 300
movement
[mm]
axial
lateral
13
7
14
6
18
6
22
8
22
6
25
5
25
4
25
4
27
3
26
3
28
2
13
7
14
6
18
6
22
8
22
6
25
5
25
4
25
4
27
3
26
3
28
2
AX1FU-10 type
elasticity
[N/mm]
axial
lateral
135
83
150
141
123
193
183
237
169
407
161
595
193
974
212
1418
195
1703
236
3184
351
5941
135
83
150
141
123
193
183
237
169
407
161
595
193
974
212
1418
195
1703
236
3184
351
5941
Ln
N x d2
160
160
160
180
175
170
195
195
195
195
240
110
115
115
140
135
135
140
145
145
145
150
48,3
60,3
76,1
88,9
114,3
139,7
168,3
193,7
219,1
273
323,9
150
165
185
200
220
250
285
315
340
395
445
110
125
145
160
180
210
240
270
295
350
400
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
8 x 22
12 x 22
12 x 22
315

Steel compensators
LA1 - PN 10
LA1ST-10:
LA1FT-10:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
Fixed flanges
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 10 bar
Compensators designed for application in pipelines to compensate lateral movements.
LA1ST-10 type
code
nominal
diameter
[mm]
lateral
movement
[mm]
BM-LA1ST-10-0040-030-0
BM-LA1ST-10-0050-025-0
BM-LA1ST-10-0065-025-0
BM-LA1ST-10-0080-033-0
BM-LA1ST-10-0100-025-0
BM-LA1ST-10-0125-022-0
BM-LA1ST-10-0150-020-0
BM-LA1ST-10-0175-017-0
BM-LA1ST-10-0200-016-0
BM-LA1ST-10-0250-017-0
BM-LA1ST-10-0300-022-0
BM-LA1FT-10-0040-030-0
BM-LA1FT-10-0050-025-0
BM-LA1FT-10-0065-025-0
BM-LA1FT-10-0080-033-0
BM-LA1FT-10-0100-025-0
BM-LA1FT-10-0125-022-0
BM-LA1FT-10-0150-020-0
BM-LA1FT-10-0175-017-0
BM-LA1FT-10-0200-016-0
BM-LA1FT-10-0250-017-0
BM-LA1FT-10-0300-022-0
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
30
25
25
33
25
22
20
17
16
17
22
30
25
25
33
25
22
20
17
16
17
22
316
LA1FT-10 type
elasticity
[N/mm]
axial
63
70
57
85
79
75
88
97
88
91
117
63
70
57
85
79
75
88
97
88
91
117
lateral
10
17
22
28
48
71
112
163
197
229
283
10
17
22
28
48
71
112
163
197
229
283
Ln
N x d2
445
445
440
485
475
475
475
475
525
555
600
185
190
190
235
225
225
230
235
230
265
310
48,3
60,3
76,1
88,9
114,3
139,7
168,3
193,7
219,1
273,3
323,9
150
165
185
200
220
250
285
315
340
395
445
110
125
145
160
180
210
240
270
295
350
400
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
8 x 22
12 x 22
12 x 22

Steel compensators
LA2 - PN 10
LA2ST-10:
LA2FT-10:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
Fixed flanges
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 10 bar
LA2ST-10 type
code
nominal
diameter
[mm]
lateral
movement
[mm]
BM-LA2ST-10-0040-075-0
BM-LA2ST-10-0050-075-0
BM-LA2ST-10-0065-075-0
BM-LA2ST-10-0080-075-0
BM-LA2ST-10-0100-075-0
BM-LA2ST-10-0125-075-0
BM-LA2ST-10-0150-075-0
BM-LA2ST-10-0175-075-0
BM-LA2ST-10-0200-075-0
BM-LA2ST-10-0250-055-0
BM-LA2ST-10-0300-055-0
BM-LA2FT-10-0040-075-0
BM-LA2FT-10-0050-075-0
BM-LA2FT-10-0065-075-0
BM-LA2FT-10-0080-075-0
BM-LA2FT-10-0100-075-0
BM-LA2FT-10-0125-075-0
BM-LA2FT-10-0150-075-0
BM-LA2FT-10-0175-075-0
BM-LA2FT-10-0200-075-0
BM-LA2FT-10-0250-055-0
BM-LA2FT-10-0300-055-0
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
75
75
75
75
75
75
75
75
75
55
55
75
75
75
75
75
75
75
75
75
55
55
LA2FT-10 type
elasticity
[N/mm]
axial
68
75
61
92
85
81
96
106
97
118
176
97
107
87
131
121
115
137
152
139
169
251
lateral
1
2
3
7
8
11
14
16
18
41
82
2
3
4
10
12
16
20
23
25
59
117
Ln
N x d2
620
630
615
615
645
660
700
745
805
765
780
360
375
360
365
395
415
455
505
515
475
490
48,3
60,3
76,1
88,9
114,3
139,7
168,3
193,7
219,1
273,3
323,9
150
165
185
200
220
250
285
315
340
395
445
110
125
145
160
180
210
240
270
295
350
400
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
8 x 22
12 x 22
12 x 22
317

Steel compensators
AN1 H - PN 16
AN1SH-16:
AN1FH-16:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
Fixed flanges
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 16 bar
AN1SH-16 type
code
BM-AN1SH-16-0040-015-0
BM-AN1SH-16-0050-015-0
BM-AN1SH-16-0065-015-0
BM-AN1SH-16-0080-015-0
BM-AN1SH-16-0100-015-0
BM-AN1SH-16-0125-015-0
BM-AN1SH-16-0150-015-0
BM-AN1SH-16-0175-014-0
BM-AN1SH-16-0200-014-0
BM-AN1SH-16-0250-011-0
BM-AN1SH-16-0300-010-0
BM-AN1FH-16-0040-015-0
BM-AN1FH-16-0050-015-0
BM-AN1FH-16-0065-015-0
BM-AN1FH-16-0080-015-0
BM-AN1FH-16-0100-015-0
BM-AN1FH-16-0125-015-0
BM-AN1FH-16-0150-015-0
BM-AN1FH-16-0175-014-0
BM-AN1FH-16-0200-014-0
BM-AN1FH-16-0250-011-0
BM-AN1FH-16-0300-010-0
318
nominal
diameter
[mm]
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
angular
movement
[deg]
15
15
15
15
15
15
15
14
14
11
10
15
15
15
15
15
15
15
14
14
11
10
AN1FH-16 type
angular
elasticity
[Nmm/deg]
2112
3682
5012
6078
10339
22540
27634
39846
63942
114879
159735
2112
3682
5012
6078
10339
22540
27634
39846
63942
114879
159735
Ln
N x d2
300
300
300
315
290
295
320
340
345
345
345
95
95
95
110
95
100
135
135
140
150
160
48,3
60,3
76,1
88,9
114,3
139,7
168,3
193,7
219,1
273
323,9
-
110
125
145
160
180
210
240
270
295
355
410
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
12 x 22
12 x 26
12 x 26

Steel compensators
AN1 K - PN 16
AN1SK-16:
AN1FK-16:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
Fixed flanges
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 16 bar
AN1SK-16 type
code
BM-AN1SK-16-0040-015-0
BM-AN1SK-16-0050-015-0
BM-AN1SK-16-0065-015-0
BM-AN1SK-16-0080-015-0
BM-AN1SK-16-0100-015-0
BM-AN1SK-16-0125-015-0
BM-AN1SK-16-0150-015-0
BM-AN1SK-16-0175-014-0
BM-AN1SK-16-0200-014-0
BM-AN1SK-16-0250-011-0
BM-AN1SK-16-0300-010-0
BM-AN1FK-16-0040-015-0
BM-AN1FK-16-0050-015-0
BM-AN1FK-16-0065-015-0
BM-AN1FK-16-0080-015-0
BM-AN1FK-16-0100-015-0
BM-AN1FK-16-0125-015-0
BM-AN1FK-16-0150-015-0
BM-AN1FK-16-0175-014-0
BM-AN1FK-16-0200-014-0
BM-AN1FK-16-0250-011-0
BM-AN1FK-16-0300-010-0
nominal
diameter
[mm]
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
angular
movement
[deg]
15
15
15
15
15
15
15
14
14
11
10
15
15
15
15
15
15
15
14
14
11
10
AN1FK-16 type
angular
elasticity
[Nmm/deg]
2112
3682
5012
6078
10339
22540
27634
39846
63960
114879
159735
2112
3682
5012
6078
10339
22540
27634
39846
63942
114879
159735
Ln
N x d2
300
300
300
315
290
295
320
340
345
345
345
95
95
95
110
95
100
135
135
140
150
160
48,3
60,3
76,1
88,9
114,3
139,7
168,3
193,7
219,1
273
323,9
-
110
125
145
160
180
210
240
270
295
355
410
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
12 x 22
12 x 26
12 x 26
319

Steel compensators
AX1 - PN 16
AX1SU-16:
AX1FU-16:
AX1HU-16:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
Flanges according to DIN 2576
Flanges according to DIN 2633
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 16 bar
Axial compensators designed for application in pipelines to compensate axial and lateral movements.
AX1SU-16 type
code
nominal
diameter
[mm]
BM-AX1SU-16-0040-011-0
BM-AX1SU-16-0050-012-0
BM-AX1SU-16-0065-013-0
BM-AX1SU-16-0080-017-0
BM-AX1SU-16-0100-015-0
BM-AX1SU-16-0125-018-0
BM-AX1SU-16-0150-025-0
BM-AX1SU-16-0175-025-0
BM-AX1SU-16-0200-028-0
BM-AX1SU-16-0250-028-0
BM-AX1SU-16-0300-029-0
BM-AX1FU-16-0040-011-0
BM-AX1FU-16-0050-012-0
BM-AX1FU-16-0065-013-0
BM-AX1FU-16-0080-017-0
BM-AX1FU-16-0100-015-0
BM-AX1FU-16-0125-018-0
BM-AX1FU-16-0150-025-0
BM-AX1FU-16-0175-025-0
BM-AX1HU-16-0200-028-0
BM-AX1HU-16-0250-028-0
BM-AX1HU-16-0300-029-0
DN 40
DN 50
DN 65
DN 80
DN 100
DN 125
DN 150
DN-175
DN 200
DN 250
DN 300
DN 40
DN 50
DN 65
DN 80
DN 100
DN 125
DN 150
DN-175
DN 200
DN 250
DN 300
320
AX1FU-16 type
movement
[mm]
axial
lateral
11
6
12
5
13
5
17
6
15
3
18
3
25
5
25
4
28
4
28
3
29
3
11
6
12
5
13
5
17
6
15
3
18
3
25
5
25
4
28
4
28
3
29
3
elasticity
[N/mm]
axial
lateral
270
154
307
269
258
377
237
318
237
1004
341
1945
298
1368
326
2057
404
2907
473
5223
467
7177
270
154
307
269
258
377
237
318
237
1004
341
1945
298
1368
326
2057
404
2907
473
5223
467
7177
AX1HU-16 type
Ln
N x d2
160
160
160
175
150
155
200
200
205
205
245
110
115
115
135
110
120
145
145
150
245
260
48,3
60,3
76,1
88,9
114,3
139,7
168,3
193,7
219,1
273
323,9
150
165
185
200
220
250
285
315
340
405
460
110
125
145
160
180
210
240
270
295
355
410
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
12 x 22
12 x 26
12 x 26

Steel compensators
LA1 - PN 16
LA1ST-16:
LA1FT-16:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
Fixed flanges
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 16 bar
LA1ST-16 type
code
nominal
diameter
[mm]
lateral
movement
[mm]
BM-LA1ST-16-0040-026-0
BM-LA1ST-16-0050-025-0
BM-LA1ST-16-0065-020-0
BM-LA1ST-16-0080-026-0
BM-LA1ST-16-0100-018-0
BM-LA1ST-16-0125-025-0
BM-LA1ST-16-0150-021-0
BM-LA1ST-16-0175-018-0
BM-LA1ST-16-0200-018-0
BM-LA1ST-16-0250-020-0
BM-LA1ST-16-0300-024-0
BM-LA1FT-16-0040-026-0
BM-LA1FT-16-0050-025-0
BM-LA1FT-16-0065-020-0
BM-LA1FT-16-0080-026-0
BM-LA1FT-16-0100-018-0
BM-LA1FT-16-0125-025-0
BM-LA1FT-16-0150-021-0
BM-LA1FT-16-0175-018-0
BM-LA1FT-16-0200-018-0
BM-LA1FT-16-0250-020-0
BM-LA1FT-16-0300-024-0
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
26
25
20
26
18
25
21
18
18
20
24
26
25
20
26
18
25
21
18
18
20
24
LA1FT-16 type
elasticity
[N/mm]
axial
126
143
120
111
91
113
136
148
183
181
155
126
143
120
111
91
113
136
148
183
181
155
lateral
18
32
44
37
72
93
158
227
335
375
341
18
32
44
37
72
93
158
227
335
375
341
Ln
N x d2
450
450
450
480
455
485
485
485
495
580
615
195
200
195
230
205
240
240
245
330
380
430
48,3
60,3
76,1
88,9
114,3
139,7
168,3
193,7
219,1
273
323,9
150
165
185
200
220
250
285
315
340
405
460
110
125
145
160
180
210
240
270
295
355
410
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
12 x 22
12 x 26
12 x 26
321

Steel compensators
LA2 - PN 16
LA2ST-16:
LA2FT-16:
Material:
Flanges:
Welding ends:
Working temp.:
Working press.:
Welding ends
Fixed flanges
AISI 321
Carbon steel
Carbon steel
Up to +550C
Up to 16 bar
LA2ST-16 type
code
nominal
diameter
[mm]
lateral
movement
[mm]
BM-LA2ST-16-0040-075-0
BM-LA2ST-16-0050-075-0
BM-LA2ST-16-0065-075-0
BM-LA2ST-16-0080-075-0
BM-LA2ST-16-0100-075-0
BM-LA2ST-16-0125-075-0
BM-LA2ST-16-0150-075-0
BM-LA2ST-16-0175-075-0
BM-LA2ST-16-0200-075-0
BM-LA2ST-16-0250-055-0
BM-LA2ST-16-0300-055-0
BM-LA2FT-16-0040-075-0
BM-LA2FT-16-0050-075-0
BM-LA2FT-16-0065-075-0
BM-LA2FT-16-0080-075-0
BM-LA2FT-16-0100-075-0
BM-LA2FT-16-0125-075-0
BM-LA2FT-16-0150-075-0
BM-LA2FT-16-0175-075-0
BM-LA2FT-16-0200-075-0
BM-LA2FT-16-0250-055-0
BM-LA2FT-16-0300-055-0
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
DN40
DN50
DN65
DN80
DN100
DN125
DN150
DN175
DN200
DN250
DN300
75
75
75
75
75
75
75
75
75
55
55
75
75
75
75
75
75
75
75
75
55
55
322
LA2FT-16 type
elasticity
[N/mm]
axial
135
153
130
118
119
171
149
163
202
236
233
193
219
185
169
170
244
213
233
289
337
333
lateral
2
3
4
6
6
13
22
25
42
102
113
3
4
5
9
8
18
32
36
60
145
162
Ln
N x d2
670
690
695
670
740
740
705
745
745
745
780
410
435
440
420
490
495
460
505
580
545
595
48,3
60,3
76,1
88,9
114,3
139,7
168,3
193,7
219,1
273
323,9
150
165
185
200
220
250
285
315
340
405
460
110
125
145
160
180
210
240
270
295
355
410
4 x 18
4 x 18
4 x 18
8 x 18
8 x 18
8 x 18
8 x 22
8 x 22
12 x 22
12 x 26
12 x 26

PTFE compensators
Working parameters of PTFE compensators
The working parameters of compensators listed in the tables (working pressure, temperature) are the maximum
values and must not occur simultaneously. At elevated temperatures, it is required to reduce the values given in
the table regarding the maximum working pressure. Please contact Sales or Technical Department of TUBES
INTERNATIONAL in the event of any doubts concerning permissible working parameters of the compensator in
particular application.
compensator type
R-LD
R-HD
maximum working pressure [bar]
working \
temperature
2 3 convolutions
4 6 convolutions
7 10 convolutions
+50C
+100C
+235C
+50C
+100C
+235C
+50C
+100C
+235C
6
4,5
1
10
8
2
16
12,5
3
2,5
2
0
6
4,5
1
10
8
2
1
0,7
0 *)
2,5
2
0
6
4,5
1
323

PTFE compensators
R-LD, R, R-HD type
Material:
Reinforcement:
Flanges:
Working temp.:
PTFE (also antistatic)

Stainless steel rings
Ductile cast iron GGG 40 with tie rods
Up to +235C
Characteristics: PTFE compensators are made of helically corrugated bellow finished with flanges. Reinforced
with external rings made of stainless steel. Flanges made according to ASA and DIN standards.
Special versions are also available: double walled bellow with a draining system, with carbon
steel or stainless steel flanges, with reinforcing rings made of Monel 400 or Hastelloy N4, with
internal pilot ferrule.
Due to such advantages as good flexibility of connection, very good chemical and thermal
resistance and self-cleaning properties they are widely used in chemical, food and pharmaceutical
industry.
R-LD type 6 bar
code
DN
[mm]
TG-R-LD-025-*
TG-R-LD-032-*
TG-R-LD-040-*
TG-R-LD-050-*
TG-R-LD-065-*
TG-R-LD-080-*
TG-R-LD-100-*
TG-R-LD-125-*
TG-R-LD-150-*
TG-R-LD-200-*
TG-R-LD-250-*
TG-R-LD-300-*
TG-R-LD-350-*
TG-R-LD-400-*
TG-R-LD-500-*
TG-R-LD-600-*
25
32
40
50
65
80
100
125
150
200
250
300
350
400
500
600
324
two
convolution
bellow
45
55
55
60
60
65
70
75
75
80
90
95
100
100
105
105
length [mm]
three
convolution
bellow
55
65
70
70
80
90
95
100
105
110
120
125
125
135
140
140
any
additional
convolution +
12
13
15
16
20
24
25
25
25
25
26
26
26
26
26
26
axial
movement /
convolution
[ mm]
5,5
5,5
6
6
6,5
6,5
7,5
8
8,5
9
10
10
10,5
10,5
11
11
lateral
movement /
convolution
[ mm]
3,5
3,5
4
4
5
5
5,5
5,5
5,5
6
6
6
6
6
6,5
6,5
angular
movement /
convolution
[ mm]
8
7,5
7,5
6,5
6
6
5,5
5
4
3,5
3,5
3
3
2,5
2,5
2

PTFE compensators
R type 10 bar
code
DN
[mm]
TG-R-025-*
TG-R-032-*
TG-R-040-*
TG-R-050-*
TG-R-065-*
TG-R-080-*
TG-R-100-*
TG-R-125-*
TG-R-150-*
TG-R-200-*
TG-R-250-*
TG-R-300-*
TG-R-350-*
TG-R-400-*
TG-R-500-*
TG-R-600-*
25
32
40
50
65
80
100
125
150
200
250
300
350
400
500
600
two
convolution
bellow
45
55
55
60
60
65
70
75
75
80
90
95
100
100
105
105
length [mm]
three
convolution
bellow
55
65
70
70
80
90
95
100
105
110
120
125
125
135
140
140
any
additional
convolution +
12
13
15
16
20
24
25
25
25
25
26
26
26
26
26
26
axial
movement /
convolution
[ mm]
4,5
4,5
5
5
5,5
5,5
6
6,5
7
7,5
8
8
8,5
8,5
9
9
lateral
movement /
convolution
[ mm]
3
3
3,5
3,5
4
4
4,5
4,5
4,5
5
5
5
5
5
5,5
5,5
angular
movement /
convolution
[ mm]
6,5
6
6
5,5
5
5
4,5
4
3,5
3
3
2,5
2,5
2
2
1,5
two
convolution
bellow
45
55
55
60
60
65
70
75
75
80
90
95
100
100
105
105
length [mm]
three
convolution
bellow
55
65
70
70
80
90
95
100
105
110
120
125
125
135
140
140
any
additional
convolution +
12
13
15
16
20
24
25
25
25
25
26
26
26
26
26
26
axial
movement /
convolution
[ mm]
3
3
3,5
3,5
4
4
4,5
4,5
5
5
5,5
5,5
6
6
6,5
6,5
lateral
movement /
convolution
[ mm]
2
2
2,5
2,5
3
3
3
3
3
3,5
3,5
3,5
3,5
3,5
4
4
angular
movement /
convolution
[ mm]
4,5
4
4
3,5
3,5
3,5
3
3
2,5
2
2
1,5
1,5
1,5
1,5
1
R-HD type 16 bar

code
DN
[mm]
TG-R-HD-025-*
TG-R-HD-032-*
TG-R-HD-040-*
TG-R-HD-050-*
TG-R-HD-065-*
TG-R-HD-080-*
TG-R-HD-100-*
TG-R-HD-125-*
TG-R-HD-150-*
TG-R-HD-200-*
TG-R-HD-250-*
TG-R-HD-300-*
TG-R-HD-350-*
TG-R-HD-400-*
TG-R-HD-500-*
TG-R-HD-600-*
25
32
40
50
65
80
100
125
150
200
250
300
350
400
500
600
NOTE!
* in code number refers to number of convolutions e.g. TB-R-300-3 refers to a R type compensator, DN 300 with
3 convolutions.
325

Fabric compensators
Fabric compensators are designed for cold and hot air installations, ventilation and air-conditioning systems, power
plant exhaust fumes systems, to transfer loose products, etc.
Bellows of the compensators can be made of polyester or aramid fabric, fibreglass or ceramic fabric, fabric
impregnated with EPDM rubber, Hypalon, silicone, Viton. All building materials are free of asbestos. The choice of
adequate bellow material depends on the medium and its temperature (from +100C to +1000C).
As textile materials are flexible and malleable they can be used to produce compensators of any cross-section
e.g. circular, oval, rectangular. A set of layers, dimensions and shape of the compensator are selected individually
for each item. Bellows can be flat, corrugated, with or without reinforcing rings, with diameter reduction, with flow
liners. The liners are used to guide the stream inside the compensator. Recommended for abrasive products, at
high flow rates, in high contamination of particulate media in order to reduce impurities build-up on the bellow walls.
Examples of fabric compensator design
326
sleeve compensator
corrugated compensator
corrugated compensator with

sleeve and flange ends
compensator with insulation

and flow liner
flanged compensator
flanged compensator
INDUSTRIAL FITTINGS - couplings

TW couplings (EN ISO 14420-6, DIN 28450)
Material:
AISI 316 steel, brass, nickel-plated

brass, aluminium
Coupling seal
Hypalon - for AISI 316 steel
(GSD /TWF/TWO): NBR - for other materials
Thread seal (GD): PTFE - for AISI 316 steel
Polyurethane - for other materials
Working press.:
From 0.8 bar to 16 bar
Working temp.:
From -20C to +100C
(allow for medium and sealing material
TW (Tankwagen) couplings made according to EN ISO 14420-6 (previous DIN 28450) are also called tanker
couplings or eurocouplings. Designed to transfer liquid, solid and gaseous products (except liquid gas and steam).
Used in reloading applications in petrochemical, chemical and food industry. TW coupling consists of MK part and
VK part. Both parts are locked together by a turn of the couplings and then secured by a locking handle. The handle
prevents turning and uncoupling of the parts.
A plug VB (for MK part) and a cap MB (for VK part) are resistant to pressure. If the installation operates constantly
under pressure, it is required to use safety locks. The main seal for this type of coupling is GSD moulded seal
as a standard (TWO O-ring for 4). There is TWF flat seal (TWO for 4) used in MB caps. TWF seal can be used
instead of GSD. The thread is sealed with GD flat seal. Standard seals are supplied with couplings. Seals made of
other materials are also available (see the table). When selecting a proper coupling for the medium it is required
to check the corrosion resistance of its material, sealing and temperature impact. It is recommended to use TW
couplings coated with ECTFE for highly aggressive media.
seal material
symbol
colour
gasket type
temperature range
(approximate)
polyurethane (PUR, Vulkollan)

nitrile (NBR, Perbunan)
Hypalon (CSM)
Viton (FPM)
PTFE (PTFE)
PTFE / Viton
EPDM
Vamac
VU
PE
HY
VI
TE
TEVI
EP
BIT
blue
black
green
black with red dot
white
white (encapsulated)
black
two red dots
GSD, TWF, GD
GSD, TWO, TWF
GSD, TWO, TWF
GSD, TWO, TWF, GD
TWO, TWF, GD
TWO, TWF
TWF, GD
GSD
from -20C up to +70C

up to +200C
MK coupling
(MKV + MKH)
KRS fitting
GD
TWF
GSD
VB plug
RS
safety clamp
KRS fitting
VK coupling
MB cap
GD
RS
safety clamp
327

There are two versions of TW couplings available:
- couplings made by Roman Seliger (EN ISO 14420-6), designed for the most demanding industrial applications,
available with 3.1 material certificate on request, manufactured to the highest quality standards. Marked with
a standard code e.g. TW-MKV-050MS.
- ECONOMY - economical version of couplings, for general industrial application. Marked with a code with the
letter X added at the end, e.g. TW-MKV-050MSX.
VK and MK part of a coupling have BSP female threads whose size corresponds to the size of the coupling (2,
3 and 4). They can be mounted on fittings with matching BSP male thread:
- KRS fittings designed for rubber and plastic hoses, assembled with RS-636... safety clamps, matched to the
hose diameter and wall thickness,
- KKW fittings designed for rubber and plastic hoses, assembled with worm-drive clamps,
- VSL fittings with BSP male thread designed for rubber and plastic hoses, supplied as a set with RS-636...
aluminium safety clamps,
- DT-KGZ-... composite hose fittings,
- TB-AF1-... steel hose fittings,
- other fittings and adaptors with adequate BSP male thread.
VKS2 and MKS2 couplings are supplied as a set with RS-636... aluminium safety clamps.
VKS1 and MKS1 are one-piece couplings with an integrated hose fitting (no threaded connection). Supplied as a
set with RS-636... aluminium safety clamps. VKS1 couplings have KSR polyamide safety ring.
VB plugs and MB caps are supplied without a chain that links each of them with proper coupling part. KN chain
must be ordered separately.
There are no tools needed to join the coupling parts (MK with VK). TS wrench is used to mount the couplings on
hoses and then on an installation.
picture
Fitting with male thread with hose tail
KKW
Fitting with male thread for RS safety
clamp assembly
KRS
328
code
thread size
[mm]
hose DN
[mm]
material
TW-KKW-025-MS
25
brass
TW-KKW-050-MS
50
brass
TW-KKW-75-MS
75
brass
TW-KKW-080-MS
80
brass
TW-KKW-100-MS
100
brass
TW-KRS-025-MS
TW-KRS-032-MS
TW-KRS-038-MS
TW-KRS-050-MS
TW-KRS-050-SS
TW-KRS-063-MS
TW-KRS-075-MS
TW-KRS-075-SS
TW-KRS-100-MS
TW-KRS-100-SS
1
1.1/4
1.1/2
2
2
2.1/2
3
3
4
4
25
32
38
50
50
63
75
75
100
100
brass
brass
brass
brass
AISI 316
brass
brass
AISI 316
brass
AISI 316

picture
code
VK coupling with female thread
VK
Sealing ring
MKV
Clamping ring with handle
MKH
MK coupling with female thread
TW-VK-050-SS
TW-VK-050-SSX
TW-VK-050-MS
TW-VK-050-MSX
TW-VK-080-SS
TW-VK-080-SSX
TW-VK-080-MS
TW-VK-080-MSX
TW-VK-080-AL
TW-VK-100-SS
TW-VK-100-SSX
TW-VK-100-MS
TW-VK-100-MSX
TW-MKV-050-SS
TW-MKV-050-SSX
TW-MKV-050-MS
TW-MKV-050-MSX
TW-MKV-080-SS
TW-MKV-080-SSX
TW-MKV-080-MS
TW-MKV-080-MSX
TW-MKV-080-AL
TW-MKH-050-SS
TW-MKH-050-SSX
TW-MKH-050-NI
TW-MKH-050-MS
TW-MKH-050-MSX
TW-MKH-080-SS
TW-MKH-080-SSX
TW-MKH-080-NI
TW-MKH-080-MS
TW-MKH-080-MSX
TW-MKH-080-AL
TW-MK-050-SS
TW-MK-050-SSNI
size
VK 50 - 2
(TW 1501)
VK 80 - 3
(TW 501)
TW-MK-080-MS
TW-MK-080-AL
TW-MK-100-SS
TW-MK-100-SSX
TW-MK-100-SSNI
MK
TW-MK-100-MS
TW-MK-100-MSX
weight
[kg]
AISI 316
0,31
brass
0,36
AISI 316
0,73
brass
0,75
aluminium
0,27
AISI 316
1,15
brass
1,10
AISI 316
0,22
brass
0,24
AISI 316
0,51
brass
0,55
aluminium
0,20
AISI 316
0,47
nickel plated brass
0,47
brass
0,49
AISI 316
0,94
nickel plated brass
0,99
brass
1,00
aluminium
AISI 316
AISI 316
nickel plated brass
brass
AISI 316
AISI 316
nickel plated brass
brass
aluminium
0,39
0,69
AISI 316
2,75
AISI 316
nickel plated brass
2,75
brass
2,75
VK 100 - 4
MKV - 2
(TW 1502)
MKV - 3
(TW 502)
MKH - 2
(TW 1503)
MKH - 3
(TW 503)
MK 50 - 2
(TW 1502)
TW-MK-050-MS
TW-MK-080-SS
TW-MK-080-SSNI
material
MK 80 - 3
(TW 502)
MK 100 - 4
0,69
0,73
1,45
1,50
1,55
0,59
329

picture
material
weight
[kg]
AISI 316
0,83
TW-VKS1-050-MS
brass
0,96
TW-VKS1-080-SS
AISI 316
1,80
brass
2,05
brass
3,50
AISI 316
1,10
AISI 316
nickel plat. brass
1,15
brass
1,10
code
One piece VK coupling with RS safety

clamp
size
hose DN
[mm]
TW-VKS1-050-SS
VKS 50 - 2
VKS 80 - 3
50x8 mm
75x8 mm
TW-VKS1-080-MS
VKS 1
One piece MK coupling with RS safety
clamp
TW-VKS1-100-MS
VKS 100 - 4
100x8 mm
TW-MKS1-050-SS
TW-MKS1-050-SSNI
MKS 50 - 2
50x8
TW-MKS1-050-MS
TW-MKS1-080-SS
TW-MKS1-080-SSNI
MKS 1
Two part VK coupling with RS safety
clamp
VKS 2
Two part MK coupling with RS safety
clamp
MKS 2
330
MKS 80 - 3
75x8
MKS 100 - 4
100x8
TW-MKS1-080-MS
TW-MKS1-100-MS
TW-VKS2-050032-SS
TW-VKS2-050032-MS
TW-VKS2-050038-SS
VKS 50 - 2
TW-VKS2-050038-MS
TW-VKS2-050050-SS
TW-VKS2-050050-MS
TW-VKS2-080063-SS
TW-VKS2-080063-MS
TW-VKS2-080075-SS
TW-VKS2-080075-MS VKS 80 - 3
TW-VKS2-080075-AL
TW-VKS2-080080-SS
TW-VKS2-080080-MS
TW-VKS2-100100-SS
VKS 100 - 4
TW-VKS2-100100-MS
TW-MKS2-050032-SS
TW-MKS2-050032-MS
TW-MKS2-050038-SS
MKS 50 - 2
TW-MKS2-050038-MS
TW-MKS2-050050-SS
TW-MKS2-050050-MS
TW-MKS2-080063-SS
TW-MKS2-080063-MS
TW-MKS2-080075-SS
TW-MKS2-080075-MS MKS 80 - 3
TW-MKS2-080075-AL
TW-MKS2-080080-SS
TW-MKS2-080080-MS
TW-MKS2-100100-SS
MKS 100 - 4
TW-MKS2-100100-MS
32x6
38x6,5
50x8
63x8
65x7
75x8
80x8
100x8
32x6
38x6,5
50x8
63,8
65x7
75x8
80x8
100x8
AISI 316
2,25
AISI 316
nickel plat. brass
2,30
brass
2,35
brass
4,75
AISI 316
brass
AISI 316
brass
AISI 316
brass
AISI 316
brass
AISI 316
brass
aluminium
AISI 316
brass
AISI 316
brass
AISI 316
brass
AISI 316
brass
AISI 316
brass
AISI 316
brass
AISI 316
brass
aluminium
AISI 316
brass
AISI 316
brass
0,88
0,85
0,82
0,89
0,92
1,10
2,10
2,10
1,85
2,20
1,10
1,85
2,05
3,85
4,35
1,25
1,20
1,20
1,25
1,30
1,45
2,70
2,75
2,55
3,00
1,40
2,55
2,85
5,45
6,00

picture
Cap
MB
Plug
VB
picture
weight
[kg]
AISI 316
0,30
brass
0,35
aluminium
0,14
AISI 316
0,66
brass
0,87
aluminium
0,30
AISI 316
1,20
brass
1,25
aluminium
0,45
AISI 316
0,31
brass
0,32
aluminium
0,13
AISI 316
0,76
brass
0,85
aluminium
0,25
AISI 316
1,15
aluminium
0,44
length
[mm]
material
weight
[kg]
200
200
300
300
350
350
AISI 305
brass
AISI 305
brass
AISI 305
brass
0,002
0,002
0,002
0,003
0,003
0,003
size
material
weight
[kg]
TW-TS-050
TS 50 - 2
steel
0,93
TW-TS-080
TS 80 - 3
steel
1,35
TW-TS-100
TS 100 - 4
steel
2,35
TW-MB-050-SS
TW-MB-050-SSX
TW-MB-050-MS
TW-MB-050-MSX
TW-MB-050-AL
TW-MB-050-ALX
TW-MB-080-SS
TW-MB-080-SSX
TW-MB-080-MS
TW-MB-080-MSX
TW-MB-080-AL
TW-MB-080-ALX
TW-MB-100-SS
TW-MB-100-SSX
TW-MB-100-MSX
TW-MB-100-AL
TW-MB-100-ALX
TW-VB-050-SS
TW-VB-050-SSX
TW-VB-050-MS
TW-VB-050-MSX
TW-VB-050-AL
TW-VB-050-ALX
TW-VB-080-SS
TW-VB-080-SSX
TW-VB-080-MS
TW-VB-080-MSX
TW-VB-080-AL
TW-VB-080-ALX
TW-VB-100-SS
TW-VB-100-SSX
TW-VB-100-AL
TW-VB-100-ALX
code
KN
Chain
material
code
picture
TW-KN-200-SS
TW-KN-200-MS
TW-KN-300-SS
TW-KN-300-MS
TW-KN-350-SS
TW-KN-350-MS
code
Wrench
TS
size
MB 50
(TW 1506)
MB 80
(TW 506)
MB 100
VB 50
(TW 1507)
VB 80
(TW 507)
VB 100
331

picture
material
weight
[kg]
polyurethane
NBR
Viton
Hypalon
PTFE
PTFE / NBR
polyurethane
NBR
Viton
Hypalon
PTFE
PTFE / NBR
0,007
0,007
0,010
0,007
0,011
0,010
0,016
0,016
0,022
0,018
0,025
0,024
TW-TWO-100-PE
NBR
0,016
TW-TWO-100-VI
Viton
0,027
Hypalon
0,020
PTFE
0,026
TW-TWO-100-TEPE
PTFE / NBR
0,028
TW-GSD-050-VU
TW-GSD-050-PE
TW-GSD-050-VI
TW-GSD-050-HY
TW-GSD-080-VU
TW-GSD-080-PE
TW-GSD-080-VI
TW-GSD-080-HY
TW-GSD-080-BIT
TW-GD-050-VU
TW-GD-050-VI
TW-GD-050-TE
TW-GD-050-EP
TW-GD-065-VU
TW-GD-065-VI
TW-GD-065-TE
TW-GD-080-VU
TW-GD-080-VI
TW-GD-080-TE
TW-GD-080-EP
TW-GD-100-VU
TW-GD-100-VI
TW-GD-100-TE
TW-GD-100-EP
polyurethane
NBR
Viton
Hypalon
polyurethane
NBR
Viton
Hypalon
Vamac
polyurethane
Viton
PTFE
EPDM
polyurethane
Viton
PTFE
polyurethane
Viton
PTFE
EPDM
polyurethane
Viton
PTFE
EPDM
0,008
0,009
0,012
0,011
0,015
0,018
0,026
0,022
0,015
0,004
0,003
0,004
0,004
0,005
0,006
0,007
0,006
0,008
0,006
0,006
0,009
0,014
0,009
0,009
code
MB cap seal
TWF
Coupling seal
TW-TWF-050-VU
TW-TWF-050-PE
TW-TWF-050-VI
TW-TWF-050-HY
TW-TWF-050-TE
TW-TWF-050-TEPE
TW-TWF-080-VU
TW-TWF-080-PE
TW-TWF-080-VI
TW-TWF-080-HY
TW-TWF-080-TE
TW-TWF-080-TEPE
TW-TWO-100-HY
TWO
Coupling seal
GSD
Thread seal
GD
332
size
DN
[mm]
TWF 2
50
TWF 3
80
TWO 4
100
TW-TWO-100-TE
GSD 2
50
GSD 3
80
GD 2
50
GD 2.1/2
65
GD 3
80
GD 4
100

E-CTFE lined couplings
E-CTFE liner
E-CTFE coated couplings resist the most aggressive chemicals, even so corrosive that the couplings made of
AISI 316 acid resistant steel fail. When corrosion is the case, it is recommended to use either expensive couplings
made of special nickel-based alloys (e.g. Hastelloy) or (not so expensive) AISI 316 steel couplings with powder
coated E-CTFE liner.
E-CTFE is a copolymer of ethylene and chlorotrifluoroethylene, known under the brand name Halar. It is highly
resistant to chemicals over a wide temperature range (approximately from -40C to +130C). Resistant to all
acids, lye and other aggressive media (pH range 1 14). Very good mechanical properties, especially hardness
and abrasion resistance. E-CTFE coatings have exceptional surface smoothness. The coating made of E-CTFE
is about 0.5 0.6 mm thick. There are two special versions also available: a conductive version (R<106) and the
one compliant with FDA requirements for food transfer.
Several types of industrial couplings can be coated with E-CTFE e.g.:
- TW couplings,
- CAMLOCK couplings,
- flanges,
- threaded couplings and adaptors,
- composite hose fittings,
- breakaway couplings.
picture
MK coupling with female thread
MK
VK coupling with female thread
VK
Fitting with male tread for RS safety
clamp assembly
KRS
code
size
material
[mm]
weight
[kg]
TW-MK-050-SSE
MK 50 - 2
(TW 1502)
AISI 316
E-CTFE
0,69
TW-MK-080-SSE
MK 80 - 3
(TW 502)
AISI 316
E-CTFE
1,45
TW-MK-100-SSE
MK 100 - 4
AISI 316
E-CTFE
2,75
TW-VK-050-SSE
VK 50 G 2
(TW 1501)
AISI 316
E-CTFE
0,31
TW-VK-080-SSE
VK 080 G 3
(TW 501)
AISI 316
E-CTFE
0,73
TW-VK-100-SSE
VK 100 G 4
AISI 316
E-CTFE
1,15
TW-KRS-050-SSE
DN 50 - 2
AISI 316
E-CTFE
TW-KRS-075-SSE
DN 75 - 3
AISI 316
E-CTFE
TW-KRS-100-SSE
DN 100 - 4
AISI 316
E-CTFE
VB plug and MB caps are also available with E-CTFE liner.
333

CAMLOCK couplings
CAMLOCK couplings are made in compliance with MIL-C-27487 (A-A-59326) specification. Their simple structure
and easy operation make them very popular. The coupling is connected by simply opening the coupler arms and
inserting the adaptor into the coupler. The cam arms are then closed under normal hand pressure to complete joint.
The standard coupling is supplied with a nitrile rubber seal that is placed in the groove of a coupler. The couplings
can be made of: aluminium, brass (bronze), stainless steel AISI 316, polypropylene reinforced with fibreglass.
Handles are made of stainless steel AISI 304 as a standard for all couplings made of brass, stainless steel and
polypropylene. Aluminium couplings are available with stainless steel handles in sizes 1/2, 3/4, 1, 5 and 6 and
brass handles in sizes ranging from 1.1/4 to 4.
1/2 polypropylene couplings have 3/4 coupler and 3/4 adaptor, however 1.1/4 couplings have 1 coupler
and adaptor as a standard (1.1/2 coupler and adaptor are also available).
1.1/2 CRS and ERS fittings size are made for hoses with inside diameter 38mm and 40mm.
Working pressure chart (bar)
material/size
1/2
3/4 2
2.1/2
5, 6
brass
aluminium
AISI 316L
polypropylene
11
11
11
5
18
18
18
7
11
11
16
-
9
9
14
4
7
7
7
-
5
5
7
-
6
(4 handles)
10
10
14
-
These working pressures are given for ambient temperatures using elastomeric seals. Higher temperatures and
PTFE seals will reduce the pressure rating of the coupling. In case of polypropylene maximum working temperature
is +70C and at this temperature working pressures above must be reduced by 40%.
Steel couplings are sealed with nitrile gaskets, polypropylene couplings with EPDM gaskets.
Threaded coupling connections with installation are sealed on the thread (BSPT male thread, BSP female thread).
AU and DU couplings with a flat seal (polyurethane for aluminium couplings, PTFE for SS couplings) should be
used when connecting with an installation with parallel male thread. Couplings with NPT thread are also available.
TUBES INTERNATIONAL provides two kinds of CAMLOCK fittings:
- SNAPLOCK - made by Action Sealtite, Heavy Duty type; used for important industrial connections, available
with 3.1B certificate if requested. Marked with a standard code number e.g. AC-A-100-SS.
- ECONOMY - economical version of CAMLOCK fittings for general industrial applications. This version comes
with reduced wall thickness, economical finish, and with reduced mechanical resistance. Yet it meets all pressure
requirements. It is marked with a code with the letter X added at the end e.g. AC-A-100-SSX.
size
[inch]
picture
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
334
5
6
code
(brass)
AC-A-050-B
AC-A-075-B
AC-A-100-B
AC-A-125-B
AC-A-150-B
AC-A-200-B
AC-A-250-B
AC-A-300-B
AC-A-400-B
AC-A-500-B
AC-A-600-B
-
code
(aluminium)
AC-A-050-A
AC-A-075-A
AC-A-075-AX
AC-A-100-A
AC-A-100-AX
AC-A-125-A
AC-A-125-AX
AC-A-150-A
AC-A-150-AX
AC-A-200-A
AC-A-200-AX
AC-A-250-A
AC-A-250-AX
AC-A-300-A
AC-A-300-AX
AC-A-400-A
AC-A-400-AX
AC-A-500-A
AC-A-500-AX
AC-A-600-A
AC-A-600-AX
code
(AISI 316)
AC-A-050-SS
AC-A-050-SSX
AC-A-075-SS
AC-A-075-SSX
AC-A-100-SS
AC-A-100-SSX
AC-A-125-SS
AC-A-125-SSX
AC-A-150-SS
AC-A-150-SSX
AC-A-200-SS
AC-A-200-SSX
AC-A-250-SS
AC-A-250-SSX
AC-A-300-SS
AC-A-300-SSX
AC-A-400-SS
AC-A-400-SSX
AC-A-500-SS
AC-A-500-SSX
AC-A-600-SS
AC-A-600-SSX
code
(polypropylene)
AC-A-050-P
AC-A-050-PX
AC-A-075-P
AC-A-075-PX
AC-A-100-P
AC-A-100-PX
AC-A-125-P
AC-A-125-PX
AC-A-150-P
AC-A-150-PX
AC-A-200-P
AC-A-200-PX
AC-A-300-P
AC-A-300-PX
AC-A-400-PX
-

CAMLOCK couplings
size
[inch]
picture
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
ERS
5
6
code
(brass)
AC-F-050-B
AC-F-075-B
AC-F-100-B
AC-F-125-B
AC-F-150-B
AC-F-200-B
AC-F-250-B
AC-F-300-B
AC-F-400-B
AC-F-500-B
AC-F-600-B
AC-E-050-B
AC-E-075-B
AC-E-100-B
AC-E-125-B
AC-E-150-B
AC-E-200-B
AC-E-250-B
AC-E-300-B
AC-E-400-B
AC-E-500-B
AC-E-600-B
-
code
(aluminium)
AC-F-050-A
AC-F-075-A
AC-F-075-AX
AC-F-100-A
AC-F-100-AX
AC-F-125-A
AC-F-125-AX
AC-F-150-A
AC-F-150-AX
AC-F-200-A
AC-F-200-AX
AC-F-250-A
AC-F-250-AX
AC-F-300-A
AC-F-300-AX
AC-F-400-A
AC-F-400-AX
AC-F-500-A
AC-F-500-AX
AC-F-600-A
AC-F-600-AX
AC-E-050-A
AC-E-075-A
AC-E-075-AX
AC-E-100-A
AC-E-100-AX
AC-E-125-A
AC-E-125-AX
AC-E-150-A
AC-E-150-AX
AC-E-200-A
AC-E-200-AX
AC-E-250-A
AC-E-250-AX
AC-E-300-A
AC-E-300-AX
AC-E-400-A
AC-E-400-AX
AC-E-500-A
AC-E-500-AX
AC-E-600-A
AC-E-600-AX
-
code
(AISI 316)
AC-F-050-SS
AC-F-050-SSX
AC-F-075-SS
AC-F-075-SSX
AC-F-100-SS
AC-F-100-SSX
AC-F-125-SS
AC-F-125-SSX
AC-F-150-SS
AC-F-150-SSX
AC-F-200-SS
AC-F-200-SSX
AC-F-250-SS
AC-F-250-SSX
AC-F-300-SS
AC-F-300-SSX
AC-F-400-SS
AC-F-400-SSX
AC-F-500-SS
AC-F-500-SSX
AC-F-600-SS
AC-F-600-SSX
AC-E-050-SS
AC-E-050-SSX
AC-E-075-SS
AC-E-075-SSX
AC-E-100-SS
AC-E-100-SSX
AC-E-125-SS
AC-E-125-SSX
AC-E-150-SS
AC-E-150-SSX
AC-E-200-SS
AC-E-200-SSX
AC-E-250-SS
AC-E-250-SSX
AC-E-300-SS
AC-E-300-SSX
AC-E-400-SS
AC-E-400-SSX
AC-E-500-SS
AC-E-500-SSX
AC-E-600-SS
AC-E6-00-SSX
AC-ERS-075-SS
AC-ERS-100-SS
AC-ERS-100-SSX
AC-ERS-125-SS
AC-ERS-150-SS
AC-ERS-150-SSX
AC-ERS-200-SS
AC-ERS-200-SSX
AC-ERS-300-SS
AC-ERS-300-SSX
AC-ERS-400-SSX
-
code
(polypropylene)
AC-F-050-P
AC-F-050-PX
AC-F-075-P
AC-F-075-PX
AC-F-100-P
AC-F-100-PX
AC-F-125-P
AC-F-125-PX
AC-F-150-P
AC-F-150-PX
AC-F-200-P
AC-F-200-PX
AC-F-300-P
AC-F-300-PX
AC-F-400-PX
AC-E-050-P
AC-E-050-PX
AC-E-075-P
AC-E-075-PX
AC-E-100-P
AC-E-100-PX
AC-E-125-P
AC-E-125-PX
AC-E-150-P
AC-E-150-PX
AC-E-200-P
AC-E-200-PX
AC-E-300-P
AC-E-300-PX
AC-E-400-PX
-
335

CAMLOCK couplings
picture
AU
FLA
size
[inch]
code
(brass)
code
(aluminium)
code
(AISI 316)
code
(polypropylene)
1/2
AC-AU-050-A
AC-AU-050-SS
3/4
AC-AU-075-A
AC-AU-075-SS
AC-AU-100-A
AC-AU-100-SS
1.1/4
AC-AU-125-A
AC-AU-125-SS
1.1/2
AC-AU-150-A
AC-AU-150-SS
AC-AU-200-A
AC-AU-200-SS
2.1/2
AC-AU-250-A
AC-AU-250-SS
AC-AU-300-A
AC-AU-300-SS
AC-AU-400-A
AC-AU-400-SS
AC-AU-500-A
AC-AU-500-SS
AC-AU-600-A
AC-AU-600-SS
-
1/2
3/4
AC-FLA-075-B
AC-FLA-075-A
AC-FLA-075-SS
AC-FLA-075-P
AC-FLA-100-B
AC-FLA-100-A
AC-FLA-100-SS
AC-FLA-100-P
1.1/4
AC-FLA-125-A
AC-FLA-125-SS
1.1/2
AC-FLA-150-B
AC-FLA-150-A
AC-FLA-150-SS
AC-FLA-150-P
AC-FLA-200-B
AC-FLA-200-A
AC-FLA-200-SS
AC-FLA-200-P
2.1/2
AC-FLA-250-B
AC-FLA-250-A
AC-FLA-250-SS
AC-FLA-300-B
AC-FLA-300-A
AC-FLA-300-SS
AC-FLA-300-P
AC-FLA-400-B
AC-FLA-400-A
AC-FLA-400-SS
AC-FLA-600-B
AC-FLA-600-A
AC-FLA-600-SS
AC-DP-050-B
AC-DP-075-B
AC-DP-100-B
AC-DP-125-B
AC-DP-150-B
AC-DP-200-B
AC-DP-250-B
AC-DP-300-B
AC-DP-400-B
AC-DP-500-B
AC-DP-600-B
-
AC-DP-050-A
AC-DP-075-A
AC-DP-075-AX
AC-DP-100-A
AC-DP-100-AX
AC-DP-125-A
AC-DP-125-AX
AC-DP-150-A
AC-DP-150-AX
AC-DP-200-A
AC-DP-200-AX
AC-DP-250-A
AC-DP-250-AX
AC-DP-300-A
AC-DP-300-AX
AC-DP-400-A
AC-DP-400-AX
AC-DP-500-A
AC-DP-500-AX
AC-DP-600-A
AC-DP-600-AX
AC-DP-050-SS
AC-DP-050-SSX
AC-DP-075-SS
AC-DP-075-SSX
AC-DP-100-SS
AC-DP-100-SSX
AC-DP-125-SS
AC-DP-125-SSX
AC-DP-150-SS
AC-DP-150-SSX
AC-DP-200-SS
AC-DP-200-SSX
AC-DP-250-SS
AC-DP-250-SSX
AC-DP-300-SS
AC-DP-300-SSX
AC-DP-400-SS
AC-DP-400-SSX
AC-DP-500-SS
AC-DP-500-SSX
AC-DP-600-SS
AC-DP-600-SSX
AC-DP-075-P
AC-DP-075-PX
AC-DP-100-P
AC-DP-100-PX
AC-DP-150-P
AC-DP-150-PX
AC-DP-200-P
AC-DP-200-PX
AC-DP-300-P
AC-DP-300-PX
AC-DP-400-PX
-
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
DP
336
5
6

CAMLOCK couplings
size
[inch]
picture
code
(brass)
AC-D-050-B
AC-D-075-B
AC-D-100-B
AC-D-125-B
AC-D-150-B
AC-D-200-B
AC-D-250-B
AC-D-300-B
AC-D-400-B
AC-D-500-B
AC-D-600-B
-
code
(aluminium)
AC-D-050-A
AC-D-075-A
AC-D-075-AX
AC-D-100-A
AC-D-100-AX
AC-D-125-A
AC-D-125-AX
AC-D-150-A
AC-D-150-AX
AC-D-200-A
AC-D-200-AX
AC-D-250-A
AC-D-250-AX
AC-D-300-A
AC-D-300-AX
AC-D-400-A
AC-D-400-AX
AC-D-500-A
AC-D-500-AX
AC-D-600-A
AC-D-600-AX
code
(AISI 316)
AC-D-050-SS
AC-D-050-SSX
AC-D-075-SS
AC-D-075-SSX
AC-D-100-SS
AC-D-100-SSX
AC-D-125-SS
AC-D-125-SSX
AC-D-150-SS
AC-D-150-SSX
AC-D-200-SS
AC-D-200-SSX
AC-D-250-SS
AC-D-250-SSX
AC-D-300-SS
AC-D-300-SSX
AC-D-400-SS
AC-D-400-SSX
AC-D-500-SS
AC-D-500-SSX
AC-D-600-SS
AC-D-600-SSX
code
(polypropylene)
AC-D-050-P
AC-D-050-PX
AC-D-075-P
AC-D-075-PX
AC-D-100-P
AC-D-100-PX
AC-D-125-P
AC-D-125-PX
AC-D-150-P
AC-D-150-PX
AC-D-200-P
AC-D-200-PX
AC-D-300-P
AC-D-300-PX
AC-D-400-PX
-
1/2
AC-DU-050-A
AC-DU-050-SS
3/4
AC-DU-075-A
AC-DU-075-SS
AC-DU-100-A
AC-DU-100-SS
1.1/4
AC-DU-125-A
AC-DU-125-SS
1.1/2
AC-DU-150-A
AC-DU-150-SS
AC-DU-200-A
AC-DU-200-SS
2.1/2
AC-DU-250-A
AC-DU-250-SS
AC-DU-300-A
AC-DU-300-SS
AC-DU-400-A
AC-DU-400-SS
AC-DU-500-A
AC-DU-500-SS
AC-DU-600-A
AC-DU-600-SS
AC-B-050-B
AC-B-075-B
AC-B-100-B
AC-B-125-B
AC-B-150-B
AC-B-200-B
AC-B-250-B
AC-B-300-B
AC-B-400-B
AC-B-500-B
AC-B-600-B
-
AC-B-050-A
AC-B-075-A
AC-B-075-AX
AC-B-100-A
AC-B-100-AX
AC-B-125-A
AC-B-125-AX
AC-B-150-A
AC-B-150-AX
AC-B-200-A
AC-B-200-AX
AC-B-250-A
AC-B-250-AX
AC-B-300-A
AC-B-300-AX
AC-B-400-A
AC-B-400-AX
AC-B-500-A
AC-B-500-AX
AC-B-600-A
AC-B-600-AX
AC-B-050-SS
AC-B-050-SSX
AC-B-075-SS
AC-B-075-SSX
AC-B-100-SS
AC-B-100-SSX
AC-B-125-SS
AC-B-125-SSX
AC-B-150-SS
AC-B-150-SSX
AC-B-200-SS
AC-B-200-SSX
AC-B-250-SS
AC-B-250-SSX
AC-B-300-SS
AC-B-300-SSX
AC-B-400-SS
AC-B-400-SSX
AC-B-500-SS
AC-B-500-SSX
AC-B-600-SS
AC-B-600-SSX
AC-B-050-P
AC-B-050-PX
AC-B-075-P
AC-B-075-PX
AC-B-100-P
AC-B-100-PX
AC-B-125-P
AC-B-125-PX
AC-B-150-P
AC-B-150-PX
AC-B-200-P
AC-B-200-PX
AC-B-300-P
AC-B-300-PX
AC-B-400-PX
-
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
DU
5
6
6
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
337

CAMLOCK couplings
size
[inch]
picture
code
(brass)
AC-C-050-B
AC-C-075-B
AC-C-100-B
AC-C-125-B
AC-C-150-B
AC-C-200-B
AC-C-250-B
AC-C-300-B
AC-C-400-B
AC-C-500-B
AC-C-600-B
-
code
(aluminium)
AC-C-050-A
AC-C-075-A
AC-C-075-AX
AC-C-100-A
AC-C-100-AX
AC-C-125-A
AC-C-125-AX
AC-C-150-A
AC-C-150-AX
AC-C-200-A
AC-C-200-AX
AC-C-250-A
AC-C-250-AX
AC-C-300-A
AC-C-300-AX
AC-C-400-A
AC-C-400-AX
AC-C-500-A
AC-C-500-AX
AC-C-600-A
AC-C-600-AX
-
code
(AISI 316)
AC-C-050-SS
AC-C-050-SSX
AC-C-075-SS
AC-C-075-SSX
AC-C-100-SS
AC-C-100-SSX
AC-C-125-SS
AC-C-125-SSX
AC-C-150-SS
AC-C-150-SSX
AC-C-200-SS
AC-C-200-SSX
AC-C-250-SS
AC-C-250-SSX
AC-C-300-SS
AC-C-300-SSX
AC-C-400-SS
AC-C-400-SSX
AC-C-500-SS
AC-C-500-SSX
AC-C-600-SS
AC-C-600-SSX
AC-CRS-075-SS
AC-CRS-100-SS
AC-CRS-100-SSX
AC-CRS-125-SS
AC-CRS-150-SS
AC-CRS-150-SSX
AC-CRS-200-SS
AC-CRS-200-SSX
AC-CRS-300-SS
AC-CRS-300-SSX
AC-CRS-400-SSX
code
(polypropylene)
AC-C-050-P
AC-C-050-PX
AC-C-075-P
AC-C-075-PX
AC-C-100-P
AC-C-100-PX
AC-C-125-P
AC-C-125-PX
AC-C-150-P
AC-C-150-PX
AC-C-200-P
AC-C-200-PX
AC-C-300-P
AC-C-300-PX
AC-C-400-PX
-
3/4
AC-FLB-075-B
AC-FLB-075-A
AC-FLB-075-SS
AC-FLB-075-P
AC-FLB-100-B
AC-FLB-100-A
AC-FLB-100-SS
AC-FLB-100-P -
1.1/4
AC-FLB-125-A
AC-FLB-125-SS
1.1/2
AC-FLB-150-B
AC-FLB-150-A
AC-FLB-150-SS
AC-FLB-150-P
AC-FLB-200-B
AC-FLB-200-A
AC-FLB-200-SS
AC-FLB-200-P
2.1/2
AC-FLB-250-B
AC-FLB-250-A
AC-FLB-250-SS
AC-FLB-300-B
AC-FLB-300-A
AC-FLB-300-SS
AC-FLB-300-P
AC-FLB-400-B
AC-FLB-400-A
AC-FLB-400-SS
AC-FLB-600-B
AC-FLB-600-A
AC-FLB-600-SS
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
CRS
5
6
1/2
FLB
338

CAMLOCK couplings
size
[inch]
picture
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
DC
picture
5
6
code
(brass)
AC-DC-050-B
AC-DC-075-B
AC-DC-100-B
AC-DC-125-B
AC-DC-150-B
AC-DC-200-B
AC-DC-250AC-DC-300-B
AC-DC-400-B
AC-DC-500-B
AC-DC-600-B
-
code
AR
AA
FR
code
(aluminium)
AC-DC-050-A
AC-DC-075-A
AC-DC-075-AX
AC-DC-100-A
AC-DC-100-AX
AC-DC-125-A
AC-DC-125-AX
AC-DC-150-A
AC-DC-150-AX
AC-DC-200-A
AC-DC-200-AX
AC-DC-250-A
AC-DC-250-AX
AC-DC-300-A
AC-DC-300-AX
AC-DC-400-A
AC-DC-400-AX
AC-DC-500-A
AC-DC-500-AX
AC-DC-600-A
AC-DC-600-AX
code
(AISI 316)
AC-DC-050-SS
AC-DC-050-SSX
AC-DC-075-SS
AC-DC-075-SSX
AC-DC-100-SS
AC-DC-100-SSX
AC-DC-125-SS
AC-DC-125-SSX
AC-DC-150-SS
AC-DC-150-SSX
AC-DC-200-SS
AC-DC-200-SSX
AC-DC-250-SS
AC-DC-250-SSX
AC-DC-300-SS
AC-DC-300-SSX
AC-DC-400-SS
AC-DC-400-SSX
AC-DC-500-SS
AC-DC-500-SSX
AC-DC-600-SS
AC-DC-600-SSX
description
code
(polypropylene)
AC-DC-075-P
AC-DC-075-PX
AC-DC-100-P
AC-DC-100-PX
AC-DC-150-P
AC-DC-150-PX
AC-DC-200-P
AC-DC-200-PX
AC-DC-300-P
AC-DC-300-PX
AC-DC-400-PX
-
material
AC-A-200-300-AX
2 adaptor A type with 3 female thread
aluminium
AC-A-300-200-AX
aluminium
AC-A-300-400-AX
aluminium
AC-A-400-300-AX
aluminium
AC-A-400-600-AX
aluminium
AC-A-600-400-AX
aluminium
AC-AA-100/100-AX
dual adaptor A type 1 x 1
aluminium
AC-AA-125/125-AX
dual adaptor A type 1.1/4 x 1.1/4
aluminium
AC-AA-150/150-AX
dual adaptor A type 1.1/2 x 1.1/2
aluminium
AC-AA-150/200-AX
dual adaptor A type 1.1/2 x 2
aluminium
AC-AA-200/200-AX
aluminium
AC-AA-200/250-AX
dual adaptor A type 2 x 2.1/2
aluminium
AC-AA-200/300-AX
aluminium
AC-AA-300/300-AX
aluminium
AC-AA-300/400-AX
aluminium
AC-AA-400/400-AX
aluminium
AC-AA-400/600-AX
aluminium
AC-AA-600/600-AX
aluminium
AC-F-300-150-AX
3 adaptor F type with 1.1/2 male thread
aluminium
AC-F-300-200-AX
3 adaptor F type with 2 male thread
aluminium
AC-F-300-400-AX
3 adaptor F type with 4 male thread
aluminium
339

CAMLOCK couplings
picture
code
DA
description
material
AC-D-150/A-100-AX
1.1/2 coupler D type x 1 adaptor A type
aluminium
AC-D-150/A-200-AX
1.1/2 coupler D type x 2 adaptor A type
aluminium
AC-D-200/A-150-AX
2 coupler D type x 1.1/2 adaptor A type
aluminium
AC-D-200/A-300-AX
2 coupler D type x 3 adaptor A type
aluminium
AC-D-200/A-400-AX
aluminium
AC-D-300/A-150-AX
aluminium
AC-D-300/A-200-AX
aluminium
AC-D-300/A-250-AX
aluminium
AC-D-300/A-400-AX
aluminium
AC-D-400/A-200-AX
aluminium
AC-D-400/A-300-AX
aluminium
AC-D-400/A-600-AX
aluminium
AC-D-600/A-400-AX
aluminium
AC-E-300-200-AX
3 adaptor E type with 2 hose tail
aluminium
AC-E-400-300-AX
4 adaptor E type with 3 hose tail
aluminium
AC-B-150-100-AX
1.1/2 coupler B type with 1 male thread
aluminium
AC-B-200-150-AX
2 coupler B type with 1.1/2 male thread
aluminium
AC-B-300-200-AX
3 coupler B type with 2 male thread
aluminium
AC-B-300-400-AX
aluminium
AC-B-400-300-AX
aluminium
AC-C-300-200-AX
3 coupler C type with 2 hose tail
aluminium
AC-C-300-400-AX
aluminium
AC-C-400-300-AX
aluminium
AC-DD-150/150-AX
1.1/2 x 1.1/2 dual coupler D type
aluminium
AC-DD-200/200-AX
2 x 2 dual coupler D type
aluminium
AC-DD-300/300-AX
aluminium
AC-DD-400/400-AX
aluminium
ER
BR
CR
DD
340

CAMLOCK couplings
picture
Seals
picture
Special handles
picture
size
[inch]
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
size
[inch]
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
NBR
EPDM
Viton
silicone
neoprene
AC-G-050-B
AC-G-075-B
AC-G-100-B
AC-G-125-B
AC-G-150-B
AC-G-200-B
AC-G-250-B
AC-G-300-B
AC-G-400-B
AC-G-500-B
AC-G-600-B
PTFE
NBR
AC-G-050-T
AC-G-075-T
AC-G-100-T
AC-G-125-T
AC-G-150-T
AC-G-200-T
AC-G-250-T
AC-G-300-T
AC-G-400-T
AC-G-500-T
G-600-T
AC-G-050-E
AC-G-075-E
AC-G-100-E
AC-G-125-E
AC-G-150-E
AC-G-200-E
AC-G-250-E
AC-G-300-E
AC-G-400-E
AC-G-500-E
AC-G-600-E
PTFE
Viton
AC-G-100-TV
AC-G-125-TV
AC-G-150-TV
AC-G-200-TV
AC-G-300-TV
-
AC-G-050-V
AC-G-075-V
AC-G-100-V
AC-G-125-V
AC-G-150-V
AC-G-200-V
AC-G-250-V
AC-G-300-V
AC-G-400-V
AC-G-500-V
AC-G-600-V
AC-G-050-S
AC-G-075-S
polyurethane
for AU & DU
AC-GU-050-P
AC-GU-075-P
AC-GU-100-P
AC-GU-125-P
AC-GU-150-P
AC-GU-200-P
AC-GU-250-P
AC-GU-300-P
AC-GU-400-P
-
AC-G-050-N
AC-G-075-N
AC-G-100-N
AC-G-125-N
AC-G-150-N
AC-G-200-N
AC-G-250-N
AC-G-300-N
AC-G-400-N
AC-G-500-N
AC-G-600-N
PTFE
for AU & DU
AC-GU-050-T
AC-GU-075-T
AC-GU-100-T
AC-GU-125-T
AC-GU-150-T
AC-GU-200-T
AC-GU-250-T
AC-GU-300-T
AC-GU-400-T
-
FEP
AC-G-075-TS
AC-G-100-TS
AC-G-125-TS
AC-G-150-TS
AC-G-200-TS
AC-G-300-TS
AC-G-400-TS
-
food quality
neoprene
AC-G-075-NF
AC-G-100-NF
AC-G-125-NF
AC-G-150-NF
AC-G-200-NF
AC-G-300-NF
-
size
[inch]
1 type
2 type
3 type
4 type
AC-HLL-100-SS
AC-H-100-N
1.1/4 - 2.1/2
AC-HL-200-BR
AC-HLL-200-SS
AC-H-200-N
AC-HAR-200-SS
3-5
AC-HL-300-BR
AC-H-300-N
AC-HAR-300-SS
length
[mm]
brass
AISI 316
200
AC-CH-800-SS
300
AC-CH-1200-BR
AC-CH-1200-SS
Chains for caps and plugs
picture
Handles, pins, rings
size
[inch]
handle
brass
handle
AISI 316
pin
1/2 3/4
AC-HR-050-BR
AC-HR-050-SS
AC-P-050
AC-HR-100-BR
AC-HR-100-SS
AC-P-100
1.1/4 2.1/2
AC-HR-200-BR
AC-HR-200-SS
AC-P-200
3-5
AC-HR-300-BR
AC-HR-300-SS
AC-P-300
AC-HR-600-BR
AC-HR-600-SS
AC-P-600
ring
AC-R-050
AC-R-200
341

CAMLOCK couplings - SAFLOK
Material:
AISI 316
Seal:
NBR
Working press.: 20 bar (1/2 2)
10 bar (2.1/2 4)
Working temp.: From -40C up to +93C
SAFLOK couplings are a variation of CAMLOCK coupling with additional level of safety against accidental
disconnection. Safety is provided by a patented locking mechanism, built into the coupling arms. Such a design
ensures that the arms are locked automatically when closed. Opening is a simple matter of tugging the finger rings.
SAFLOK couplings are interchangeable with other CAMLOCK couplings manufactured according to MIL-C-27487
standard. Available spare parts: cam arms and pins. 1/2 couplings have 1/2 thread and 3/4 coupler.
picture
Coupler C type with hose tail
Coupler B type with male

BSPT thread
Coupler DU type with female

BSP thread (flat seal)
342
code
size
[inch]
picture
code
size
[inch]
AC-SL-CRS-075
3/4
AC-SL-CRS-100
AC-SL-C-075
3/4
AC-SL-C-100
AC-SL-C-125
1.1/4
AC-SL-CRS-125
1.1/4
AC-SL-C-150
1.1/2
AC-SL-CRS-150
1.1/2
AC-SL-C-200
AC-SL-CRS-200
AC-SL-C-250
2.1/2
AC-SL-CRS-250
2.1/2
AC-SL-C-300
AC-SL-CRS-300
AC-SL-C-400
AC-SL-CRS-400
AC-SL-B-050
1/2
AC-SL-D-050
1/2
AC-SL-B-075
3/4
AC-SL-D-075
3/4
AC-SL-B-100
AC-SL-D-100
AC-SL-B-125
1.1/4
AC-SL-D-125
1.1/4
AC-SL-B-150
1.1/2
AC-SL-D-150
1.1/2
AC-SL-B-200
AC-SL-D-200
AC-SL-B-250
2.1/2
AC-SL-D-250
2.1/2
AC-SL-B-300
AC-SL-D-300
AC-SL-B-400
AC-SL-D-400
AC-SL-DU-050
1/2
Coupler CRS type for RS

safety clamp assembly
Coupler D type with female

BSP thread
Cap DC type
AC-SL-DU-075
3/4
AC-SL-DC-075
3/4
AC-SL-DU-100
AC-SL-DC-100
AC-SL-DU-125
1.1/4
AC-SL-DC-125
1.1/4
AC-SL-DU-150
1.1/2
AC-SL-DC-150
1.1/2
AC-SL-DU-200
AC-SL-DC-200
AC-SL-DU-250
2.1/2
AC-SL-DC-250
2.1/2
AC-SL-DU-300
AC-SL-DC-300
AC-SL-DU-400
AC-SL-DC-400

IBC system
Material:
Polypropylene
Seal:
Low density polyethylene (LDPE)
Working press.: Up to 7 bar
IBC couplings were designed as the quickest and most secure unloading system for IBC (Intermediate Bulk
Containers). Because of excellent chemical resistance, lightweight of polypropylene and durability of moving
stainless steel parts, IBC couplings are a very economical solution for IBC unloading. Buttress threads according
to DIN EN 12713:2000-03, used in IBC couplings as a standard, are compatible with the threads of IBC containers
of different producers.
code
female thread
DIN EN 12713
CAMLOCK
type and size
AC-IBF060-100A
AC-IBF060-150A
AC-IBF060-200A
AC-IBF060-200D
AC-IBF092-300A
AC-IBF100-300A
S60x6
S60x6
S60x6
S60x6
S92x4
S100x8
A 1
A 1.1/2
A 2
D 2
A 3
A 3
code
female thread
DIN EN 12713
male thread BSP
AC-IBF060-M075
AC-IBF060-M100
AC-IBF060-M150
AC-IBF060-M200
AC-IBF092-M300
AC-IBF100-M300
S60x6
S60x6
S60x6
S60x6
S92x4
S100x8
3/4
1
1.1/2
2
3
3
code
female thread
DIN EN 12713
female thread BSP
AC-IBF060-F150
S60x6
1.1/2
AC-IBF060-F200
S60x6
code
female thread
DIN EN 12713
hose DN
AC-IBF060-H100
S60x6
AC-IBF060-H125
S60x6
1.1/4
AC-IBF060-H150
S60x6
1.1/2
AC-IBF060-H200
S60x6
code
male thread
DIN EN 12713
female thread
AC-IBM060-F200
S60x6
2 BSP
AC-IBM060-F200NPT
S60x6
2 NPT
343

IBC system
code
female thread
DIN EN 12713
male thread
DIN EN 12713
AC-IBF092-IBM060
S92x4
S60x6
AC-IBF100-IBM060
S100x8
S60x6
code
male thread
DIN EN 12713
male thread BSP
AC-IBM060-M200
S60x6
code
female thread
DIN EN 12713
AC-IBF-D060
S60x6
AC-IBF-D100
S100x8
Full flow ball valve entirely made of polypropylene eliminates the problem of corrosion. It is equipped with LDPE
polyethylene seal, a locking pin and a cap as standard.
344
code
DN
female thread
male thread
AC-IBV-F060-M060
S60x6
S60x6
AC-IBV-F060-M200
S60x6
2 BSP

Symmetrical couplings STORZ
STORZ couplings are designed for industrial applications transferring loose and liquid products. Widely used in
fire departments, irrigation systems, chemical and food industry, agriculture, etc.
The couplings connect particularly easy because the connecting halves are symmetrical. However only parts with
the same lug dimension (KA) can be secured together.
The difference between cast and forged couplings
STORZ couplings are available in two versions: forged couplings (according to DIN standards) and cast couplings.
The cast couplings have lower material strength and are more prone to casting defects. They can only be used
for low working pressure (up to 6 bar and less demanding and reliable applications). As a standard TUBES
INTERNATIONAL provides high quality forged couplings with working pressure up to 16 bar. The cast couplings
are available as well - special marking (*) in our catalogue. The quality difference between the cast and forged
couplings is pictured on the charts below showing a pull test results of the forged and cast couplings. The lugs
break under pressure and the cast coupling fails.
forged couplings
force (kN)
cast couplings
force (kN)
strain (mm)
strain (mm)
Seal selection
A vacuum resistant seal for suction and delivery hoses is a standard. The couplings for delivery hoses (with a short hose
tail) have seals which are not resistant to vacuum. STORZ couplings made of aluminium have white NBR rubber seal,
brass couplings - black NBR rubber, stainless steel couplings - Viton seal. There are seals made of other materials
also available - selection according to the parameters in the table below.
seal material
working temperature
range
food
applications
resistance to
oils and lubricants
NBR
white - yes
limited
silicone
yes
no
Viton
no
yes
EPDM
no
no
345

Coupling with hose tail
Material:
Aluminium (Al), brass (Ms),

stainless steel (SS)
Seal:
White NBR rubber for aluminium,
black NBR rubber for brass,
Viton for stainless steel
code
(aluminium)
code
(brass)
code
(stainless steel)
ST-12-031019-19
ST-12-031025-11
ST-12-044019-11
ST-12-044025-11
ST-12-044032-11
ST-12-051025-11
ST-12-051032-11
ST-12-051038-11
ST-12-066019-11
ST-12-066025-11
ST-12-066028-11
ST-12-066032-11
ST-12-066032-21*
ST-12-066038-11
ST-12-066038-21*
ST-12-066040-11
ST-12-066042-11
ST-12-066042-21*
ST-12-066045-11
ST-12-066045-21*
ST-12-066050-11
ST-12-066052-11
ST-12-066052-21*
ST-12-066055-11
ST-12-066060-11
ST-12-081038-11
ST-12-081052-11
ST-12-081063-11
ST-12-081065-11
ST-12-081070-11
ST-12-081075-11
ST-12-089052-11
ST-12-089065-11
ST-12-089065-21*
ST-12-089070-11
ST-12-089075-11
ST-12-089075-21*
ST-12-089080-11
ST-12-105075-11
ST-12-105090-11
ST-12-115100-11
ST-12-133090-11
ST-12-133100-11
ST-12-133100-21*
ST-12-133110-11
ST-12-133125-11
ST-12-148125-11
ST-12-160150-11
ST-12-220205-11**
ST-12-278258-11**
ST-12-031013-30
ST-12-031025-30
ST-12-044019-30
ST-12-044025-30
ST-12-044032-30
ST-12-051025-30
ST-12-051032-30
ST-12-051038-30
ST-12-066025-30
ST-12-066032-30
ST-12-066038-30
ST-12-066045-30
ST-12-066052-30
ST-12-081038-30
ST-12-081052-30
ST-12-081065-30
ST-12-081075-30
ST-12-089065-30
ST-12-089075-30
ST-12-115100-30
ST-12-133100-30
ST-12-133110-30
ST-12-148125-30
ST-12-160150-30
-
ST-12-031025-43
ST-12-051038-43
ST-12-066019-43
ST-12-066025-43
ST-12-066032-43
ST-12-066038-43
ST-12-066040-43
ST-12-066042-43
ST-12-066045-43
ST-12-066050-43
ST-12-066052-43
ST-12-081038-43
ST-12-081052-43
ST-12-081065-43
ST-12-081075-43
ST-12-089065-43
ST-12-089075-43
ST-12-089080-43
ST-12-115100-43
ST-12-133100-43
ST-12-133110-43
ST-12-148125-43
ST-12-160150-43
-
* - cast coupling PN 6 bar

** - PN 10 bar
346
size
lug dimension
KA
[mm]
25-D
31
32
44
38
51
52-C
66
65
81
75-B
89
90
105
100
115
110-A
133
125
150
205
250
148
160
220
278
hose
diam. D
[mm]
15
21/19
25
19
25
32
25
32
38
19
25
28
32
32
38
38
40
42
42
45
45
50
52
52
55
60
38
52
63
65
70
75
52
65
65
70
75
75
80
75
90
100
90
100
100
110
125
125
150
205
258
length L
Al / Ms / SS
[mm]
- - / 60 / - 55 / - - / - 53 / 53 / 53
70 / 70 / - 70 / 70 / - 70 / 70 / - 90 / 90 / - 90 / 90 / - 90 / 90 / 90
90 / - - / 90
90 / 90 / 90
90 / - - / - 90 / 90 / 90
90 / - - / - 90 / 90 / 90
90 / - - / - 90 / - - / 90
90 / - - / 90
90 / - - / - 90 / 90 / 90
90 / - - / - 90 / - - / 90
90 / 90 / 90
90 / - - / - 90 / - - / - 90 / - - / - 90 / 90 / 90
95 / 90 / 95
95 / - - / - 95 / 90 / 100
95 / - - / - 95 / 90 / 95
125 / - - / - 125 / 95 / 105
125 / - - / - 125 / - - / - 125 / 125 / 105
125 / - - / - 125 / - - / 105
160 / - - / - 160 / - - / - 150 / 125 / 150
170 / - - / - 170 / 170 / 170
170 / - - / - 170 / 170 / 170
180 / - - / - 200 / 142 / 180
180 / 180 / 180
375 / - - / - 400 / - - / - -

Delivery hose coupling
Material:
Seal:
black NBR rubber for brass
code
(aluminium)
code
(brass)
code
(stainless steel)
ST-11-059045-16
ST-11-066040-16
ST-11-066042-16
ST-11-066045-16
ST-11-066052-16
ST-11-066052-25*
ST-11-066055-16
ST-11-081052-16
ST-11-081065-16
ST-11-081075-16
ST-11-089065-16
ST-11-089070-16
ST-11-089075-16
ST-11-089075-25*
ST-11-115100-16
ST-11-133100-11
ST-11-133110-11
ST-11-066042-35
ST-11-066052-35
ST-11089075-35
-
size
lug dimension
KA
[mm]
hose
diam. D
[mm]
length L
Al / Ms / SS
[mm]
45
59
52-C
66
65
81
75-B
89
100
115
110-A
133
45
40
42
45
52
52
55
52
65
75
65
70
75
75
100
100
110
75 / - - / - 70 / - - / - 55 / 55 / - 70 / - - / - 55 / 75 / - 55 / - - / - 70 / - - / - 60 / - - / - 60 / - - / - 65 / - - / - 85 / - - / - 75 / - - / - 60 / 85 / - 60 / - - / - 85 / - - / - 110 / - - / - 110 / - - / - -
* - cast couplings PN 6 bar
Coupling for RS clamp assembly

Material:

Seal:
code
(aluminium)
code
(brass)
code
(stainless steel)
ST-13-031019-30
ST-13-031019-43
ST-13-031025-11
ST-13-031025-30
ST-13-031025-43
ST-13-066032-43
ST-13-066038-11
ST-13-066038-43
ST-13-066050-11
ST-13-066050-30
ST-13-066050-43
ST-13-081050-43
ST-13-089063-11
ST-13-089075-11
ST-13-089075-43
ST-13-115100-11
ST-13-133100-11
size
lug dimension
KA
[mm]
hose
diam. D
[mm]
length L
Al / Ms / SS
[mm]
25-D
31
32
- - / - - / 95
52-C
66
38
90 / - - / 95
50
95 / 95 / 95
65
81
50
- - / - - / 95
63
115 / - - / - -
75
105 / - - / 105
19
- - / 73 / 73
25
75 / 73 / 75
75-B
89
100
115
100
195 / - - / - -
ST-13-133100-43
110-A
133
100
145 / - - / 145
ST-13-148125-11
125
148
125
190 / - - / - -
ST-13-160150-11
150
160
150
250 / - - / - -
347

Coupling with serrated hose tail
Material:

Seal:
code
(aluminium)
code
(brass)
code
(stainless steel)
ST-12-031013-11
ST-12-031019-11
ST-14-066052-11
ST-14-089076-11
ST-14-133102-11
ST-14-133110-11
ST-14-148127-11
ST-14-160152-11
ST-12-031019-30
-
ST-12-031019-43
-
size
lug dimension
KA
[mm]
25-D
31
52-C
75-B
66
89
110-A
133
125
150
148
160
hose
diam. D
[mm]
length L
Al / Ms / SS
[mm]
15/13
21/19
51
76
102
110
127
152
55 / - - / - 55 / 55 / 55
90 / - - / - 125 / - - / - 170 / - - / - 170 / - - / - 190 / - - / - 180 / - - / - -

and plastic head
Head material:
Tail material:
Working press.:
Seal:
code
ST-12-066019-60
ST-12-066025-60
ST-12-066032-60
ST-12-066038-60
ST-12-066040-60
ST-11-066042-65*
ST-12-066042-60
ST-11-066045-65*
ST-12-066045-60
ST-12-066050-60
ST-11-066052-65*
ST-12-066052-60
ST-12-066055-60
ST-12-066060-60
* - coupling with a shorter hose tail
348
size
52-C
High performance plastic

Aluminium (Al)
10 bar
Black NBR rubber
lug dimension KA
[mm]
hose diameter D
[mm]
length L
[mm]
66
19
25
32
38
40
42
42
45
45
50
52
52
55
60
90
90
90
90
90
55
90
70
90
90
55
90
90
90

Blank cap
Material:

Seal:
code
(aluminium)
code
(brass)
code
(stainless steel)
size
lug dimension KA
[mm]
ST-31-031000-11
ST-31-031000-30
ST-31-031000-43
25-D
31
ST-31-044000-11
ST-31-044000-30
32
44
ST-31-051000-11
ST-31-051000-30
ST-31-051000-43
38
51
ST-31-059000-11
45
59
ST-31-066000-11
ST-31-066000-30
ST-31-066000-43
ST-31-066000-21*
52-C
66
65
81
75-B
89
ST-31-081000-11
ST-31-081000-30
ST-31-081000-43
ST-31-089000-11
ST-31-089000-30
ST-31-089000-43
ST-31-089000-21*
ST-31-105000-11
90
105
ST-31-115000-11
ST-31-115000-30
ST-31-115000-43
100
115
ST-31-133000-11
ST-31-133000-30
ST-31-133000-43
ST-31-133000-21*
110-A
133
ST-31-148000-11
ST-31-148000-30
ST-31-148000-43
125
148
ST-31-160000-11
ST-31-160000-30
ST-31-160000-43
150
160
ST-31-220000-11**
205
220
ST-31-278000-11**
250
278

** - PN 10 bar
Blank plastic cap

Head material:
Tail material:
Working press.:
Seal:
High performance plastic

Aluminium (Al)
10 bar
Black NBR rubber
code
size
lug dimension KA
[mm]
ST-31-066000-60
52-C
66
349

Blank cap with lock
Material:

Seal:
code
(aluminium)
code
(brass)
code
(stainless steel)
ST-31-500066-11
ST-31-500081-11
ST-31-500089-11
ST-31-500105-11
ST-31-500115-11
ST-31-500133-11
ST-31-500148-11
ST-31-500160-11
ST-31-500066-30
ST-31-500089-30
-
ST-31-500066-43
-
size
lug dimension KA
[mm]
52-C
65
75-B
90
100
110-A
125
150
66
81
89
105
115
133
148
160
(available with a universal key)
Flanged coupling
Material:

Seal:
code
(aluminium)
code
(brass)
code
(stainless steel)
size
lug dimension
KA
[mm]
flange
size
25-D
31
D
[mm]
d
[mm]
d1
[mm]
14
ST-36-031025-11
ST-36-031025-30
ST-36-031025-43
DN 25
115
85
ST-36-066040-11*
DN 40
150
110
18
ST-36-066050-11
ST-36-066050-30
ST-36-066050-43
DN 50
165
125
18
ST-36-066065-11
ST-36-066080-11
ST-36-081050-11
ST-36-081065-11
ST-36-081065-30
ST-36-081065-43
ST-36-081080-11
52-C
65
66
81
DN 65
185
145
18
DN 80
200
160
18
DN 50
165
125
18
DN 65
185
145
18
DN 80
200
160
18
ST-36-089050-11
DN 50
165
125
18
ST-36-089065-11
DN 65
185
145
18
ST-36-089080-11
ST-36-089080-30
ST-36-089080-43
ST-36-089100-11
ST-36-115100-11
ST-36-133080-11
ST-36-133100-11
ST-36-133100-30
ST-36-133100-43
75-B
100
110-A
89
115
133
DN 80
200
160
18
DN 100
220
180
18
DN 100
220
180
18
DN 80
200
160
18
DN 100
220
180
18
ST-36-148125-11
ST-36-148125-43
125
148
DN 125
250
210
18
ST-36-160150-11
ST-36-160150-43
150
160
DN 150
285
240
22
* - galvanised steel flanges
350

Adaptor with BSP male thread
Material:

Seal:
code
(aluminium)
code
(brass)
code
(stainless steel)
size
lug dimension
KA
[mm]
thread
size
[inch]
ST-22-031050-30*
ST-22-031050-43
ST-22-031075-11
ST-22-031075-30
ST-22-031075-43
1/2
ST-22-031100-11
ST-22-031100-30
ST-22-031100-43
ST-22-031125-11
1.1/4
1.1/2
3/4
25-D
31
ST-22-031150-11
ST-22-044100-11
ST-22-044100-30
ST-22-044125-11
ST-22-044125-30
ST-22-051125-11
ST-22-051125-30
ST-22-051125-43*
ST-22-051150-11
ST-22-051150-30
ST-22-051150-43
ST-22-051200-11
ST-22-051200-30
ST-22-059200-11
ST-22-066075-16*
ST-22-066100-16
ST-22-066100-30
ST-22-066100-43
ST-22-066125-16
ST-22-066125-30
ST-22-066125-43
1.1/4
ST-22-066150-16
ST-22-066150-30
ST-22-066150-43
ST-22-066200-16
ST-22-066200-30
ST-22-066200-43
ST-22-066250-16
ST-22-066250-30
2.1/2
ST-22-081125-11
1.1/4
ST-22-081150-11
ST-22-081200-11
ST-22-081200-30
ST-22-081200-43
ST-22-081250-11
ST-22-081250-30
ST-22-081250-43
32
44
38
51
1.1/2
45
59
1.1/4
1.1/4
2
3/4
52-C
66
1.1/2
1.1/2
65
81
2
2.1/2
ST-22-081300-11
ST-22-081300-30
ST-22-089200-16
ST-22-089200-30
ST-22-089200-43
ST-22-089250-16
ST-22-089250-30
ST-22-089250-43
ST-22-089300-16
ST-22-089300-30
ST-22-089300-43
ST-22-105300-11*
ST-22-115400-11
75-B
89
2.1/2
90
105
ST-22-115400-30
ST-22-115400-43*
100
115
ST-22-133400-11
ST-22-133400-30
ST-22-133400-43
ST-22-133500-11
110-A
133
ST-22-148500-11*
125
148
ST-22-160600-11
150
160
ST-22-188600-11**
165
188
ST-22-220800-11**
205
220
4
5
* - with nipple,
** - with nipple, PN 10 bar.
351

Adaptor with BSP female thread
Material:

Seal:
code
(aluminium)
code
(brass)
code
(stainless steel)
ST-21-031050-11
ST-21-031050-30
ST-21-031050-43
ST-21-031075-11
ST-21-031075-30
ST-21-031075-43
ST-21-031100-11
ST-21-031100-30
ST-21-031100-43
ST-21-031125-11
size
lug dimension
KA
[mm]
thread
size
[inch]
1/2
25-D
31
3/4
1
1.1/4
ST-21-044100-11
ST-21-044100-30
ST-21-044125-11
ST-21-044125-30
ST-21-051100-11
ST-21-051100-30
ST-21-051125-11
ST-21-051125-30
ST-21-051125-43
1.1/4
ST-21-051150-11
ST-21-051150-30
ST-21-051150-43
ST-21-051200-11
ST-21-051200-30
ST-21-059150-16
1.1/2
ST-21-059200-16
ST-21-066075-16
ST-21-066075-43
ST-21-066100-16
ST-21-066100-30
ST-21-066100-43
ST-21-066125-16
ST-21-066125-30
ST-21-066125-43
1.1/4
ST-21-066150-16
ST-21-066150-30
ST-21-066150-43
ST-21-066175-16
ST-21-066200-16
ST-21-066200-30
ST-21-066200-43
ST-21-066250-16
ST-21-066250-30
ST-21-066250-43*
2.1/2
ST-21-081100-11
ST-21-081125-11
1.1/4
ST-21-081150-11
ST-21-081200-11
ST-21-081200-30
ST-21-081200-43
ST-21-081250-11
ST-21-081250-30
ST-21-081250-43
32
38
45
44
51
59
1
1.1/4
1.1/2
2
3/4
52-C
66
1.1/2
1.3/4
65
81
1.1/2
2
2.1/2
ST-21-081300-11
ST-21-081300-30
ST-21-089200-16
ST-21-089200-30
ST-21-089200-43
ST-21-089250-16
ST-21-089250-30
ST-21-089250-43
ST-21-089300-16
ST-21-089300-30
ST-21-089300-43
ST-21-105300-11
75-B
89
2.1/2
90
105
100
115
ST-21-115400-11
ST-21-115400-30
ST-21-115400-43
ST-21-133300-11*
ST-21-133400-11
ST-21-133400-30
ST-21-133400-43
ST-21-133450-11
ST-21-133450-30
ST-21-133450-43
ST-21-133500-11*
ST-21-148400-11
ST-21-148500-11
ST-21-148500-30
ST-21-148500-43
110-A
133
4.1/2
5
125
148
4
5
ST-21-160600-11
ST-21-160600-30
ST-21-160600-43
150
160
ST-21-188600-11**
165
188
ST-21-220800-11**
205
220
ST-21-278000-11**
250
278
10
* - with reducer
** - PN 10 bar
352

Adaptor with BSP female thread
and safety latch
Material:
Aluminium (Al), stainless steel (SS)
Seal:
code
(aluminium)
code
(brass)
code
(stainless steel)
ST-27-031100-11
ST-27-051150-11
ST-27-066200-11
ST-27-081250-11
ST-27-089250-11
ST-27-089300-11
ST-27-105300-11
ST-27-115400-11
ST-27-133400-11
ST-27-133450-11
ST-27-148500-11
ST-27-160600-11
ST-27-133400-43
-
size
lug dimension
KA
[mm]
thread
size
[inch]
25-D
38
52-C
65
31
51
66
81
75-B
89
90
100
105
115
110-A
133
125
150
148
160
1
1.1/2
2
2.1/2
2.1/2
3
3
4
4
4.1/2
5
6
Swivel coupling
with BSP female thread
Material:

Seal:
code
(aluminium)
code
(brass)
code
(stainless steel)
ST-23-066125-11
ST-23-066150-11
ST-23-066200-11
ST-23-081200-11
ST-23-081250-11
ST-23-081300-11
ST-23-089200-11
ST-23-089250-11
ST-23-089300-11
ST-23-105300-11
ST-23-115400-11
ST-23-133300-11
ST-23-133400-11
ST-23-148400-11
ST-23-148500-11
ST-23-160400-11
ST-23-160500-11
ST-23-160600-11
ST-23-031075-30
ST-23-031100-30
ST-23-066200-30
-
ST-23-066150-43
ST-23-06620043
ST-23-089200-43
ST-23-089250-43
ST-23-089300-43
ST-23-133400-43
-
size
lug dimension
KA
[mm]
25-D
31
52-C
66
65
81
75-B
89
90
100
105
115
110-A
133
125
148
150
160
thread
size
[inch]
3/4
1
1.1/4
1.1/2
2
2
2.1/2
3
2
2.1/2
3
3
4
3
4
4
5
4
5
6
353

Swivel coupling
with BSP male thread
Material:

Seal:
code
(aluminium)
code
(brass)
code
(stainless steel)
ST-24-066150-11
ST-24-066200-11
ST-24-081150-11
ST-24-081200-11
ST-24-081250-11
ST-24-081300-11
ST-24-089200-11
ST-24-089250-11
ST-24-089300-11
ST-24-105300-11
ST-24-115300-11
ST-24-115400-11
ST-24-133300-11
ST-24-133400-11
ST-24-148400-11
ST-24-148500-11
ST-24-160450-11
ST-24-160500-11
ST-24-160600-11
ST-24-031075-30
ST-24-031100-30
ST-24-066200-30
-
ST-24-066200-43
ST-24-089200-43
ST-24-089250-43
ST-24-133400-43
-
size
lug dimension
KA
[mm]
25-D
31
52-C
66
65
81
75-B
89
90
105
100
115
110-A
133
125
148
150
160
Holding device
Material: Galvanised steel (St)
code
for coupling
lug dimension KA
[mm]
ST-79-066000-50
ST-79-089000-50
ST-79-133089-50
C
B
A/B
66
89
133 / 89
354
thread
size
[inch]
3/4
1
1.1/2
2
1.1/2
2
2.1/2
3
2
2.1/2
3
3
3
4
3
4
4
5
4.1/2
5
6

Reducer
Material:

Seal:
code
(aluminium)
code
(brass)
code
(stainless steel)
ST-35-031100-11
ST-35-051031-11
ST-35-059031-11
ST-35-066100-11
ST-35-066031-11
ST-35-066044-11
ST-35-066051-11
ST-35-081051-11
ST-35-081059-11
ST-35-081066-11
ST-35-089066-11
ST-35-089066-21*
ST-35-089081-11
ST-35-105089-11
ST-35-115081-11
ST-35-115089-11
ST-35-115105-11
ST-35-133066-11
ST-35-133081-11
ST-35-133089-11
ST-35-133089-21*
ST-35-133105-11
ST-35-133115-11
ST-35-148115-11
ST-35-148133-11
ST-35-160115-11
ST-35-160133-11
ST-35-160148-11
ST-35-188133-11**
ST-35-188160-11**
ST-35-220160-11**
ST-35-278220-11**
ST-35-066031-30
ST-35-066044-30
ST-35-066051-30
ST-35-081066-30
ST-35-089066-30
ST-35-089081-30
ST-35-133089-30
-
ST-35-066031-43
ST-35-081066-43
ST-35-089066-43
ST-35-089081-43
ST-35-133089-43
-
size
lug dimension KA
[mm]
25-D / Geka
38 / 25-D
45 / 25-D
52-C / Geka
52-C / 25-D
52-C / 32
52-C / 38
65 / 38
65 / 45
65 / 52-C
31 / 40
51 / 31
59 / 31
66 / 40
66 / 31
66 / 44
66 / 51
81 / 51
81 / 59
81 / 66
75-B / 52-C
89 / 66
75-B / 65
90 / 75-B
100 / 65
100 / 75-B
100 / 90
110-A / 52-C
110-A / 65
89 / 81
105 / 89
115 / 81
115 / 89
115 / 105
133 / 66
133 / 81
110-A / 75-B
133 / 89
110-A / 90
110-A / 100
125 / 100
125 / 110-A
150 / 100
150 / 110-A
150 / 125
165 / 110-A
165 / 150
205 / 150
250 / 205
133 / 105
133 / 115
148 / 115
148 / 133
160 / 115
160 / 133
160 / 148
188 / 133
188 / 160
220 / 160
278 / 220

** - PN 10 bar
355

Male / male thread coupling
code
(aluminium)
ST-37-150150-10
ST-37-150200-10
ST-37-200200-10
ST-37-200300-10
ST-37-250250-10
ST-37-250300-10
ST-37-300300-10
ST-37-300400-10
ST-37-400400-10
ST-37-400400-40*
ST-37-500500-10
ST-37-600600-10
ST-37-800800-10
male thread
size
[inch]
1.1/2
1.1/2
2
2
2.1/2
2.1/2
3
3
4
4
5
6
8
Female / male thread coupling
male thread
size
[inch]
1.1/2
2
2
3
2.1/2
3
3
4
4
4
5
6
8
* - stainless steel
code
(aluminium)
ST-37-125200-12
ST-37-150200-12
ST-37-200250-12
ST-37-200300-12
ST-37-250200-12
ST-37-250200-42*
ST-37-250300-12
ST-37-250400-12
ST-37-300200-12
ST-37-300250-12
ST-37-300400-12
ST-37-400300-12
ST-37-400500-12
ST-37-500600-12
female thread
size
[inch]
1.1/4
1.1/2
2
2
2.1/2
2.1/2
2.1/2
2.1/2
3
3
3
4
4
5
male thread
size
[inch]
2
2
2.1/2
3
2
2
3
4
2
2.1/2
4
3
5
6
* - stainless steel
Female / female thread coupling
code
(aluminium)
ST-37-200200-14
ST-37-200250-14
ST-37-200300-14
ST-37-250250-14
ST-37-250300-14
ST-37-250300-44*
ST-37-250400-14
ST-37-300300-14
ST-37-300400-14
ST-37-400400-14
ST-37-400500-14
ST-37-500500-14
ST-37-500600-14
* - stainless steel
356
female thread female thread

size
size
[inch]
[inch]
2
2
2
2.1/2
2
3
2.1/2
2.1/2
2.1/2
3
2.1/2
3
2.1/2
4
3
3
3
4
4
4
4
5
5
5
5
6
Hose connector
code
(aluminium)
hose I.D.
[mm]
ST-76-000025-30*
ST-76-000042-10
ST-76-000052-10
ST-76-000065-10
ST-76-000075-10
ST-76-000100-10
ST-76-000110-10
ST-76-000125-10
ST-76-000150-10
25
42
52
65
75
100
110
125
150
* - brass

Seal for delivery hose couplings
Material: Black NBR rubber, white NBR rubber,
Viton, KTW - for drinking water
code
(black NBR)
code
(white NBR)
code
(KTW - drinking
water)
code
(Viton)
size
lug dimension KA
[mm]
59
ST-91-001059-00
45
ST-91-001066-00
ST-91-001066-01
ST-91-001066-03
ST-91-001066-05
52-C
66
ST-91-001081-00
ST-91-001081-01
65
81
ST-91-001089-00
ST-91-001089-01
ST-91-001089-03
ST-91-001089-05
75-B
89
ST-91-001115-00
100
115
Seal for suction-delivery hoses

Material: Black NBR rubber, white NBR rubber,
Viton, KTW - for drinking water
code
(black NBR)
code
(white NBR)
code
(silicone)
code
(Viton)
code
(EPDM)
code
(KTW - drinking
water)
size
lug
KA
[mm]
ST-91-002031-00
ST-91-002031-01
ST-91-002031-02
ST-91-002031-03
ST-91-002031-04
ST-91-002031-05
25-D
31
ST-91-002044-00
ST-91-002044-01
ST-91-002044-02
32
44
ST-91-002051-00
ST-91-002051-01
ST-91-002051-02
ST-91-002051-03
38
51
ST-91-002066-00
ST-91-002066-01
ST-91-002066-02
ST-91-002066-03
ST-91-002066-04
ST-91-002066-05
52-C
66
ST-91-002081-00
ST-91-002081-01
ST-91-002081-02
ST-91-002081-03
65
81
ST-91-002089-00
ST-91-002089-01
ST-91-002089-02
ST-91-002089-03
ST-91-002089-04
ST-91-002089-05
75-B
89
ST-91-002105-00
ST-91-002105-01
ST-91-002105-02
90
105
ST-91-002115-00
ST-91-002115-01
ST-91-002115-02
ST-91-002115-03
100
115
ST-91-002133-00
ST-91-002133-01
ST-91-002133-02
ST-91-002133-03
ST-91-002133-04
ST-91-002133-05
110-A
133
ST-91-002148-00
ST-91-002148-01
ST-91-002148-02
ST-91-002148-03
125
148
ST-91-002160-00
ST-91-002160-01
ST-91-002160-02
ST-91-002160-03
150
160
ST-91-002188-01
165
188
ST-91-002220-01
205
220
ST-91-002278-01
250
278
357

Flat seal for couplings
with female thread
Material: White NBR rubber, black NBR rubber,
silicone, PTFE
code
(black NBR)
code
(white NBR)
code
(silicone)
code
(PTFE)
male thread
size
[inch]
seal
size
[mm]
ST-91-003050-00
ST-91-003050-01
1/2
22 / 17 x 2
ST-91-003075-00
ST-91-003075-01
3/4
27 / 18 x 2
ST-91-003100-00
ST-91-003100-01
ST-91-003100-02
ST-91-003100-03
33 / 20 x 3
ST-91-003125-00
ST-91-003125-01
ST-91-003125-03
1.1/4
42 / 33 x 3
ST-91-003150-00
ST-91-003150-01
ST-91-003150-03
1.1/2
48 / 39 x 3
ST-91-003200-00
ST-91-003200-01
ST-91-003200-02
ST-91-003200-03
60 / 47 x 3
ST-91-003250-00
ST-91-003250-01
ST-91-003250-03
2.1/2
76 / 66 x 3
ST-91-003300-00
ST-91-003300-01
ST-91-003300-02
ST-91-003300-03
88 / 76 x 3
ST-91-003350-00
ST-91-003350-01
3.1/2
101 / 89 x 3
ST-91-003400-00
ST-91-003400-01
ST-91-003400-02
ST-91-003400-03
113 / 102 x 3
ST-91-003450-00
ST-91-003450-01
ST-91-003450-03
4.1/2
126 / 105 x 3
ST-91-003500-00
ST-91-003500-01
ST-91-003500-03
140 / 122 x 4
ST-91-003600-00
ST-91-003600-01
ST-91-003600-03
165 / 140 x 4
ST-91-003800-00
ST-91-003800-01
216 / 190 x 5
ST-91-003999-00
ST-91-003999-01
10
267 / 240 x 5
Safety clamp preventing STORZ coupling from

disconnection
code
for O.D.
[mm]
size
ST-78-000098-00
ST-78-000126-00
ST-78-000144-00
ST-78-000156-00
ST-78-000182-00
ST-78-000196-00
ST-78-000215-00
98
126
144
156
182
196
215
52-C
75-B
90
100
110-A
125
150
358
Chain for blank caps
code
(galvanised steel)
code
(stainless steel)
size
ST-91-006031-50
ST-91-006066-50
ST-91-006133-50
ST-91-006220-50
ST-91-006031-70
ST-91-006066-70
ST-91-006133-70
-
25 do 38
45 do 75
90 do 150
165 do 205

Water jet
Blank cap with release valve
code
size
[inch]
ST-46-200066-10
ST-46-250089-10
2
2.1/2
STORZ wrenches
lug dimension
KA
[mm]
66
89
code
size
[inch]
ST-31-600066-11
ST-31-600081-11
ST-31-600089-11
ST-31-600105-11
ST-31-600115-11
ST-31-600133-11
ST-31-600148-11
ST-31-600160-11
52-C
65
75-B
90
100
110-A
125
150
code
size
ST-71-031031-50
ST-71-081051-20
lug dimension
KA
[mm]
66
81
89
105
115
133
148
160
material
pic.
steel
65/38
malleable cast iron
ST-71-089066-20
BC
malleable cast iron
ST-71-089066-50
BC
steel
(plastic handle)
ST-71-133066-20
ABC
malleable cast iron
ST-71-133066-50
ABC
steel
(plastic handle)
3
4
5
6
7
ST-71-160148-50
150/125 steel
ST-71-278188-50
250/205 steel
359

360

Symmetrical couplings GUILLEMIN
GUILLEMIN couplings are designed for transfer installations and reloading of liquid, loose and granulated products.
Not suitable for steam or gas transfer.
The coupling parts are symmetrical - both halves are identical. Manufactured according to NF-E-29572 standard.
Maximum working pressure: 16 bar
Material versions:
- aluminium (seal: white NBR rubber), working temperature: from -10C up to +80C
- AISI 316 (seal: black FKM rubber - Viton), working temperature: from -10C up to +180C
Guillemin coupling - construction and dimensions:
body
seal
locking ring
DN
[mm]
A
[mm]
B
[mm]
D
[mm]
20
25
32
40
50
65
80
100
150
47
54
58
75
92
108
131
151
236
32
37
42,5
55
69
84
103
123
193
31
37
41,5
54
68
83
101
121
190
A
B
code
DN
[mm]
hose I.D.
[mm]
GU-W-051-A
50
51
GU-W-063-A
65
63
GU-W-076-A
80
76
GU-W-081-A
80
81
102
GU-W-102-A
100
GU-W-051-SS
50
51
GU-W-063-SS
65
63
GU-W-076-SS
80
76
GU-W-102-SS
100
102
material
aluminium
AISI 316
361

Symmetrical couplings GUILLEMIN
Coupling with male thread
Coupling with female thread
Blank cap with chain
362
code
DN
[mm]
thread size
[inch]
GU-GZ-075-A
GU-GZ-100-A
GU-GZ-125-A
GU-GZ-150-A
GU-GZ-200-A
GU-GZ-250-A
GU-GZ-300-A
GU-GZ-400-A
GU-GZ-600-A
GU-GZ-075-SS
GU-GZ-100-SS
GU-GZ-125-SS
GU-GZ-150-SS
GU-GZ-200-SS
GU-GZ-250-SS
GU-GZ-300-SS
GU-GZ-400-SS
20
25
32
40
50
65
80
100
150
20
25
32
40
50
65
80
100
3/4"
1
1.1/4
1.1/2
2
2.1/2
3
4
6
3/4"
1
1.1/4
1.1/2
2
2.1/2
3
4
code
DN
[mm]
thread size
[inch]
GU-GW-075-A
GU-GW-100-A
GU-GW-125-A
GU-GW-150-A
GU-GW-200-A
GU-GW-250-A
GU-GW-300-A
GU-GW-400-A
GU-GW-600-A
GU-GW-075-SS
GU-GW-100-SS
GU-GW-125-SS
GU-GW-150-SS
GU-GW-200-SS
GU-GW-250-SS
GU-GW-300-SS
GU-GW-400-SS
20
25
32
40
50
65
80
100
150
20
25
32
40
50
65
80
100
3/4"
1
1.1/4
1.1/2
2
2.1/2
3
4
6
3/4"
1
1.1/4
1.1/2
2
2.1/2
3
4
code
DN
[mm]
GU-DP-075-A
GU-DP-100-A
GU-DP-125-A
GU-DP-150-A
GU-DP-200-A
GU-DP-250-A
GU-DP-300-A
GU-DP-400-A
GU-DP-600-A
GU-DP-075-SS
GU-DP-100-SS
GU-DP-125-SS
GU-DP-150-SS
GU-DP-200-SS
GU-DP-250-SS
GU-DP-300-SS
GU-DP-400-SS
20
25
32
40
50
65
80
100
150
20
25
32
40
50
65
80
100
material
aluminium
AISI 316
material
aluminium
AISI 316
material
aluminium
AISI 316

Symmetrical couplings NOR (Norway)
picture
picture
picture
picture
picture
code
DN
[mm]
lug
dimension
[mm]
fitting
diameter
[mm]
GP-NOR1040038B
40
50
38
GP-NOR1050038B
50
66
38
GP-NOR1050052B
50
66
52
GP-NOR1065038B
65
83
38
GP-NOR1065052B
65
83
52
GP-NOR1065064B
65
83
64
code
DN
[mm]
GP-NOR2040025B
GP-NOR2040050B
GP-NOR2050038B
GP-NOR2050050B
GP-NOR2065038B
GP-NOR2065050B
GP-NOR2065065B
40
40
50
50
65
65
65
lug
dimension
[mm]
50
50
66
66
83
83
83
thread
size
[inch]
1
2
1.1/2
2
1.1/2
2
2.1/2
code
DN
[mm]
lug
dimension
[mm]
thread
size
[inch]
GP-NOR3040032B
40
50
1.1/4
GP-NOR3050038B
50
66
1.1/2
GP-NOR3050050B
50
66
GP-NOR3065038B
65
83
1.1/2
GP-NOR3065050B
65
83
GP-NOR3065065B
65
83
2.1/2
code
DN
[mm]
lug dimension
[mm]
GP-NOR4040050B
40
50
GP-NOR4050066B
50
66
GP-NOR4065083B
65
83
code
DN
[mm]
GP-NOR5040
40
GP-NOR5050
50
GP-NOR5065
65
description
Coupling with hose tail.

Material: bronze.
Working press.: 10 bar.
Seal: NBR.
description
Coupling with BSP female
thread.
Material: bronze.
Seal: NBR.
description
Coupling with BSP male

thread.
Material: bronze.
Seal: NBR.
description
Blank cap with chain.

Material: aluminium.
Seal: NBR.
description
Seal.
Material: NBR.
363

Symmetrical couplings ROTTA ROTH (Russia)
picture
picture
picture
picture
code
DN
[mm]
lug
dimension
[mm]
fitting
diameter
[mm]
GP-ROTH1050038B
50
68
38
GP-ROTH1050052B
50
68
52
GP-ROTH1070052B
70
85
52
GP-ROTH1070064B
70
85
64
code
DN
[mm]
lug
dimension
[mm]
thread
size
[inch]
GP-ROTH2050038B
50
68
1.1/2
GP-ROTH2050050B
50
68
GP-ROTH2070050B
70
85
GP-ROTH2070065B
70
85
2.1/2
code
DN
[mm]
lug
dimension
[mm]
thread
size
[inch]
GP-ROTH3050038B
50
68
1.1/2
picture
364
Material: bronze.
Seal: NBR.
description

thread.
Material: bronze.
Seal: NBR.
description

thread.
Material: bronze.
Seal: NBR.
50
code
DN
[mm]
lug dimension
[mm]
GP-ROTH4050068B
50
68
85
Material: bronze.
Seal: NBR.
70
GP-ROTH3050050B
GP-ROTH4070085B
68
description
description
code
DN
[mm]
GP-ROTH5050
50
Seal.
GP-ROTH5070
70
Material: NBR.
description

Symmetrical couplings GOST no. 28352-89, 2217-66 (Russia)
picture
picture
picture
picture
50
lug
dimension
[mm]
78
fitting
diameter
[mm]
52
GP-GOST1070044A
70
95
44
GP-GOST1070052A
70
95
52
GP-GOST1070064A
70
95
64
GP-GOST1080075A
80
107
75
GP-GOST1100100A
100
140
100
GP-GOST1110110A
110
143
110
code
DN
[mm]
GP-GOST1050038B
GP-GOST1050052B
GP-GOST1070044B
GP-GOST1070052B
GP-GOST1070064B
GP-GOST1080075B
GP-GOST1100100B
GP-GOST1110110B
50
50
70
70
70
80
100
110
lug
dimension
[mm]
78
78
95
95
95
107
140
143
fitting
diameter
[mm]
38
52
44
52
64
75
100
110
code
DN
[mm]
lug
dimension
[mm]
thread
size
[inch]
GP-GOST2050050A
50
78
GP-GOST2050065A
50
78
2.1/2
GP-GOST2070050A
70
95
GP-GOST2070065A
70
95
2.1/2
GP-GOST2080075A
80
107
GP-GOST2110100A
110
143
code
DN
[mm]
GP-GOST2050050B
GP-GOST2050065B
GP-GOST2070050B
GP-GOST2070065B
GP-GOST2080050B
GP-GOST2080065B
GP-GOST2080075B
GP-GOST2100100B
GP-GOST2110100B
50
50
70
70
80
80
80
100
110
lug
dimension
[mm]
78
78
95
95
107
107
107
140
143
thread
size
[inch]
2
2.1/2
2
2.1/2
2
2.1/2
3
4
4
code
DN
[mm]
GP-GOST1050052A
description

Seal: NBR.
description

Material: bronze.
Seal: NBR.
description

thread.
Seal: NBR.
description

thread.
Material: bronze.
Seal: NBR.
365

Symmetrical couplings GOST no. 28352-89, 2217-66 (Russia)
picture
picture
picture
picture
picture
366
code
DN
[mm]
GP-GOST3050050A
50
lug
dimension
[mm]
78
thread
size
[inch]
2
GP-GOST3070050A
70
95
GP-GOST3070065A
70
95
2.1/2
GP-GOST3080050A
80
107
GP-GOST3080065A
80
107
2.1/2
GP-GOST3080075A
80
107
GP-GOST3110100A
110
143
code
DN
[mm]
lug
dimension
[mm]
thread
size
[inch]
GP-GOST3050065B
50
78
2.1/2
GP-GOST3070050B
70
95
GP-GOST3070065B
70
95
2.1/2
GP-GOST3080075B
80
107
GP-GOST3100100B
100
140
GP-GOST3110100B
110
143
code
DN
[mm]
lug dimension
[mm]
GP-GOST4050078A
50
78
GP-GOST4070095A
70
95
GP-GOST4080107A
80
107
GP-GOST4100140A
100
140
GP-GOST4110143A
110
143
lug
dimension
[mm]
GP-GOST4050078B
50
78
GP-GOST4070095B
70
95
GP-GOST4080107B
80
107
GP-GOST4100140B
100
140
GP-GOST4110143B
110
143
GP-GOST5050
50
GP-GOST5070
70
GP-GOST5080
80
GP-GOST5100
100
GP-GOST5110
110
Seal: NBR.
description

thread.
Material: bronze.
Seal: NBR.
description
Seal: NBR.
DN
[mm]
DN
[mm]

thread.
code
code
description
description

Material: bronze.
Seal: NBR.
description
Seal.
Material: NBR.

Symmetrical couplings SMS (Sweden)
picture
picture
picture
code
DN
[mm]
lug
dimension
[mm]
fitting
diameter
[mm]
GP-SMS1032038B
32
41
38
GP-SMS1063038B
63
76
38
GP-SMS1063052B
63
76
52
GP-SMS1063064B
63
76
64
code
DN
[mm]
lug
dimension
[mm]
thread
size
[inch]
GP-SMS2032025B
32
41
GP-SMS2032050B
32
41
GP-SMS2063025B
63
76
GP-SMS2063038B
63
76
1.1/2
GP-SMS2063050B
63
76
GP-SMS2063065B
63
76
2.1/2
code
DN
[mm]
lug
dimension
[mm]
thread
size
[inch]
GP-SMS3032050B
32
41
GP-SMS3063050B
picture
76

Material: bronze.
Seal: NBR.
description

thread.
Material: bronze.
Seal: NBR.
description
thread.
Material: bronze.
Seal: NBR.
code
DN
[mm]
lug
dimension
[mm]
GP-SMS4032041B
32
41
76
Material: bronze.
Seal: NBR.
GP-SMS4063076B
picture
32
description
63
code
DN
[mm]
GP-SMS5032
32
GP-SMS5063
63
description
description
Seal
Material: NBR.
367

Lever couplings LAUX 42
LAUX 42 couplings due to their simple, robust and reliable construction are widely used in:
- chemical and paper industry as reloading couplings,
- in waste water transport trucks,
- for transfer and reloading of loose materials (grain, flour, animal feed, granules, cement, minerals),
- for temporary water and air installations in such industries as construction, mining, agriculture, etc.
- for pressure and vacuum pumps,
- irrigation systems.
1 - lever
2 - rivet for over hook
3 - rivet for under hook
4 - lock
5 - rivet for lock
6 - spring for lock
7 - over hook
8 - pipe
9 - ring
10 - river for under hook
11 - female part
12 - under hook
13 - male part
14 - pipe
Max. working pressure

- for liquids 12,5 bar
- for air
8 bar
- vacuum-tight
Seals:
-
-
-
-
EPDM
NBR
Viton
silicone

EPDM seal is used as a standard.
KKG
368
size
38
48
60
76
102
133
152
204*
186
240
240
285
285
380
380
380
230
295
305
360
380
490
530
550
72
104
115
135
162
193
218
286
67
100
109
129
158
179
200
278
105
155
165
205
235
295
315
380
* the female coupling has 3 levers
code
(EPDM)
code
(NBR)
code
(Viton)
code
(silicone)
coupling
size
TF-1626407
TF-1626415
TF-1626423
TF-1626431
TF-1626449
TF-1626456
TF-1626464
-
TF-1626605
TF-1626613
TF-1626621
TF-1626639
TF-1626647
TF-1626654
TF-1626662
TF-1626672
TF-1626928
TF-1626936
TF-1626944
TF-1626951
TF-1626969
TF-1626977
TF-1626985
-
TF-1626993
TF-1626995
TF-1626997
-
38
48
60
76
102
133
152
204
54
72
82
100
126
145
171
245
70
100
112
130
162
189
215
275
8
14
15
15
18
22
22
15

Plug with male thread
Plug with hose tail
KVG
KVS
connection size
x thread
galvanized
steel
aluminium
stainless
steel
connection size
x hose tail size
galvanized
steel
aluminium
stainless
steel
38 x 1.1/4
38 x 1.1/2
48 x 1.1/2
48 x 2
76 x 2
76 x 2.1/2
76 x 3
102 x 3
102 x 4
133 x 5
152 x 4
152 x 6
TF-1621000
TF-1621002
TF-1621010
TF-1621028
TF-1621051
TF-1621069
TF-1621077
TF-1621081
TF-1621085
TF-1621093
TF-1621101
TF-1632409
TF-1632418
TF-1632436
TF-1632445
TF-1632454
TF-1632461
TF-1632463
TF-1632476
-
TF-1631403
TF-1631405
TF-1631407
TF-1631415
TF-1631423
TF-1631431
TF-1631449
TF-1631456
TF-1631458
TF-1631461
TF-1631470
38 x 32
38 x 38
48 x 38
48 x 48
48 x 61
76 x 48
76 x 61
76 x 74
76 x 76
102 x 74
102 x 76
102 x 90
102 x 100
133 x 125
152 x 148
204 x 198
TF-1621606
TF-1621614
TF-1621622
TF-1621655
TF-1621663
TF-1621670
TF-1621671
TF-1621672
TF-1621673
TF-1621675
TF-1621689
TF-1621697
TF-1621705
TF-1621715
TF-1632809
TF-1632818
TF-1632845
TF-1632854
TF-1632861
TF-1632863
TF-1632864
TF-1632865
TF-1632867
TF-1632872
TF-1632881
TF-1632890
-
TF-1631700
TF-1631702
TF-1631704
TF-1631712
TF-1631720
TF-1631738
TF-1631746
TF-1631753
TF-1631761
TF-1631769
TF-1631777
TF-1631785
Socket with male thread
Socket with hose tail
KMG
KMS
connection size
x thread
galvanized
steel
aluminium
stainless
steel
connection size
x hose tail size
galvanized
steel
aluminium
stainless
steel
38 x 1.1/4
38 x 1.1/2
48 x 1.1/2
48 x 2
76 x 2
76 x 2.1/2
76 x 3
102 x 3
102 x 4
133 x 5
152 x 4
152 x 6
TF-1621194
TF-1621200
TF-1621218
TF-1621226
TF-1621259
TF-1621267
TF-1621275
TF-1621279
TF-1621283
TF-1621291
TF-1621309
TF-1632509
TF-1632518
TF-1632536
TF-1632545
TF-1632554
TF-1632561
TF-1632563
TF-1632576
-
TF-1631502
TF-1631504
TF-1631506
TF-1631514
TF-1631522
TF-1631530
TF-1631548
TF-1631554
TF-1631556
TF-1631562
TF-1631570
38 x 32
38 x 38
48 x 38
48 x 48
48 x 61
76 x 48
76 x 61
76 x 74
76 x 76
102 x 74
102 x 76
102 x 90
102 x 100
133 x 125
152 x 148
204 x 198
TF-1621804
TF-1621812
TF-1621820
TF-1621853
TF-1621861
TF-1621878
TF-1621879
TF-1621880
TF-1621881
TF-1621883
TF-1621887
TF-1621895
TF-1621903
TF-1621915
TF-1632909
TF-1632918
TF-1632945
TF-1632954
TF-1632961
TF-1632963
TF-1632964
TF-1632965
TF-1632967
TF-1632972
TF-1632981
TF-1632990
-
TF-1631800
TF-1631801
TF-1631803
TF-1631811
TF-1631829
TF-1631837
TF-1631845
TF-1631852
TF-1631860
TF-1631868
TF-1631876
TF-1631884
369

Plug with welding end
Socket with welding end
KKV*
KKM*
connection size
x welding end
galvanized
steel *
aluminium
stainless
steel
connection size
x welding end
galvanized
steel *
aluminium
stainless
steel
38 x 38
38 x 42
48 x 50
48 x 60
76 x 60
76 x 76
76 x 89
102 x 102
102 x 114
133 x 127
133 x 133
133 x 139
152 x 152
152 x 168
204 x 204
204 x 219
TF-1621408
TF-1621410
TF-1621416
TF-1621418
TF-1621429
TF-1621432
TF-1621434
TF-1621440
TF-1621442
TF-1621457
TF-1621459
TF-1621465
TF-1621467
TF-1621475
TF-1621477
TF-1632609
TF-1632627
TF-1632636
TF-1632645
TF-1632654
-
TF-1631603
TF-1631605
TF-1631611
TF-1631613
TF-1631617
TF-1631621
TF-1631623
TF-1631629
TF-1631637
TF-1631639
-
38 x 38
38 x 42
48 x 50
48 x 60
76 x 60
76 x 76
76 x 84
76 x 89
102 x 102
102 x 114
133 x 127
133 x 133
133 x 139
152 x 152
152 x 168
204 x 204
204 x 219
TF-1621507
TF-1621509
TF-1621515
TF-1621517
TF-1621528
TF-1621531
TF-1621533
TF-1621549
TF-1621551
TF-1621556
TF-1621558
TF-1621564
TF-1621566
TF-1621575
TF-1621577
TF-1632709
TF-1632727
TF-1632736
TF-1632745
TF-1632754
-
TF-1631668
TF-1631670
TF-1631685
TF-1631688
TF-1631690
TF-1631692
TF-1631696
TF-1631697
TF-1631698
TF-1631699
TF-1631701
-
* - - non-galvanized version also available.
Plug end cap
Socket end cap
KXM
370
KXV
size
[mm]
galvanized
steel
aluminium
stainless
steel
size
[mm]
galvanized
steel
aluminium
stainless
steel
38
48
76
102
133
152
204
TF-1622505
TF-1622513
TF-1622539
TF-1622547
TF-1622554
TF-1622562
TF-1622575
TF-1633309
TF-1633327
TF-1633336
TF-1633345
TF-1633354
-
TF-1630977
TF-1630979
TF-1630987
TF-1630995
TF-1630997
TF-1630999
TF-1631000
38
48
76
102
133
152
204
TF-1622406
TF-1622414
TF-1622430
TF-1622448
TF-1622455
TF-1622463
TF-1622475
TF-1633209
TF-1633227
TF-1633236
TF-1633245
TF-1633254
-
TF-1630902
TF-1630904
TF-1630912
TF-1630920
TF-1630928
TF-1630936
TF-1630944

Lever couplings PERROT
PERROT coupling system is the most popular system of flexible connection in Poland. It was designed for irrigation
purposes, yet over the last decades it has been used for many other applications.
PERROT couplings (pipes and fittings) are widely used in farming, gardening, industry, construction, road and tunnel
building, groundwater drainage, sewage treatment plants, wastewater disposal and environmental engineering.
Advantages of the system:
- easy, one hand connection of the couplings,
- wide range of pipe diameters (50, 70, 108, 133,159 mm),
- angular deflection of the coupling up to 15 to both sides,
- complete leak tightness even in contaminated couplings.
PERROT couplings are made of galvanized steel as a standard.
Couplings made of acid-resistant steel (316Ti) are available in two material versions: SUPRA and OPTIMA.
- SUPRA - female and male connecting parts made of AISI 316Ti steel, levers of the female part made of galvanized
steel.
- OPTIMA - female and male connecting parts made of AISI 316Ti steel.
PERROT couplings made of acid resistant steel can be used to transfer e.g. alcohol, wine, vegetable oil, beverages,
acids, lyes, petrochemical products, chemicals. Working pressure up to 10 bar.
Socket with flange PN10
Plug with flange PN10
KMF
connection size
x flange DN
[mm]
50 X 50
70 X 65
89 X 80
108 X 100
133 X 125
galvanized
steel
AISI 316Ti
(OPTIMA)
HC-KMF-01
HC-KMF-02
HC-KMF-03
HC-KMF-04
HC-KMF-05
HC-KMF-01SS
HC-KMF-02SS
HC-KMF-03SS
HC-KMF-04SS
HC-KMF-05SS
KVF
connection size
x flange DN
[mm]
50 X 50
70 X 65
89 X 80
108 X 100
133 X 125
159 X 150
galvanized
steel
AISI 316Ti
(OPTIMA)
HC-KVF-01
HC-KVF-02
HC-KVF-03
HC-KVF-04
HC-KVF-05
HC-KVF-06
HC-KVF-01SS
HC-KVF-02SS
HC-KVF-03SS
HC-KVF-04SS
HC-KVF-05SS
HC-KVF-06SS
Plug with hose tail
KMS
connection size
x hose tail size
[mm]
50 X 50
70 X 70
89 X 75
89 X 80
89 X 90
108 X 75
108 X 100
108 X 110
133 X 125
159 X 150
galvanized
steel
AISI 316Ti
(OPTIMA)
HC-KMS-01
HC-KMS-02
HC-KMS-03
HC-KMS-04
HC-KMS-05
HC-KMS-06
HC-KMS-07
HC-KMS-08
HC-KMS-09
HC-KMS-10
HC-KMS-01SS
HC-KMS-02SS
HC-KMS-03SS
HC-KMS-04SS
HC-KMS-05SS
HC-KMS-07SS
HC-KMS-08SS
HC-KMS-09SS
HC-KMS-10SS
KVS
connection size
x hose tail size
[mm]
50 X 50
70 X 70
89 X 75
89 X 80
89 X 90
108 X 75
108 X 100
108 X 110
133 X 125
159 X 150
galvanized
steel
AISI 316Ti
(OPTIMA)
HC-KVS-01
HC-KVS-02
HC-KVS-03
HC-KVS-04
HC-KVS-05
HC-KVS-06
HC-KVS-07
HC-KVS-08
HC-KVS-09
HC-KVS-10
HC-KVS-01SS
HC-KVS-02SS
HC-KVS-03SS
HC-KVS-04SS
HC-KVS-05SS
HC-KVS-07SS
HC-KVS-08SS
HC-KVS-09SS
HC-KVS-10SS
371

Lever couplings PERROT
KMG
connection size
x hose tail size
[mm]
50 X 1.1/2
50 X 2
70 X 2
70 X 2.1/2
89 X 3
108 X 3
108 X 4
133 X 5
159 X 6
galvanized
steel
AISI 316Ti
(OPTIMA)
HC-KMG-01
HC-KMG-02
HC-KMG-03
HC-KMG-04
HC-KMG-05
HC-KMG-06
HC-KMG-07
HC-KMG-08
HC-KMG-09
HC-KMG-01SS
HC-KMG-02SS
HC-KMG-03SS
HC-KMG-04SS
HC-KMG-05SS
HC-KMG-07SS
HC-KMG-08SS
HC-KMG-09SS
Socket with welding end
KVG
connection size
x hose tail size
[mm]
50 X 1.1/2
50 X 2
70 X 2
70 X 2.1/2
89 X 3
108 X 3
108 X 4
133 X 5
159 X 6
galvanized
steel
AISI 316Ti
(OPTIMA)
HC-KVG-01
HC-KVG-02
HC-KVG-03
HC-KVG-04
HC-KVG-05
HC-KVG-06
HC-KVG-07
HC-KVG-08
HC-KVG-09
HC-KVG-01SS
HC-KVG-02SS
HC-KVG-03SS
HC-KVG-04SS
HC-KVG-05SS
HC-KVG-07SS
HC-KVG-08SS
HC-KVG-09SS
Plug with welding end
KMR
KVR
connection size
[mm]
galvanized
steel
AISI 316Ti
(OPTIMA)
connection size
[mm]
galvanized
steel
AISI 316Ti
(OPTIMA)
50
70
89
108
133
159
HC-KMR-01
HC-KMR-02
HC-KMR-03
HC-KMR-04
HC-KMR-05
HC-KMR-06
HC-KMR-01SS
HC-KMR-02SS
HC-KMR-03SS
HC-KMR-04SS
HC-KMR-05SS
HC-KMR-06SS
50
70
89
108
133
159
HC-KVR-01
HC-KVR-02
HC-KVR-03
HC-KVR-04
HC-KVR-05
HC-KVR-06
HC-KVR-01SS
HC-KVR-02SS
HC-KVR-03SS
HC-KVR-04SS
HC-KVR-05SS
HC-KVR-06SS
Plug end cap
Socket end cap
KMX
KVX
connection size
[mm]
galvanized
steel
AISI 316Ti
(OPTIMA)
connection size
[mm]
galvanized
steel
AISI 316Ti
(OPTIMA)
50
70
89
108
133
159
HC-KMX-01
HC-KMX-02
HC-KMX-03
HC-KMX-04
HC-KMX-05
HC-KMX-06
HC-KMX-01SS
HC-KMX-02SS
HC-KMX-03SS
HC-KMX-04SS
HC-KMX-05SS
HC-KMX-06SS
50
70
89
108
133
159
HC-KVX-01
HC-KVX-02
HC-KVX-03
HC-KVX-04
HC-KVX-05
HC-KVX-06
HC-KVX-01SS
HC-KVX-02SS
HC-KVX-03SS
HC-KVX-04SS
HC-KVX-05SS
HC-KVX-06SS
372

Lever couplings BAUER
Material:
Galvanized steel
Seal:
NR-SBR
Working press.: 20 bar sizes up to 89 mm
12 bar sizes above 89 mm
Bauer couplings (pipes and fittings) are widely used in farming, gardening, industry, construction, road and tunnel
Coupling design allows angular deflection of the connected coupling (max. 30 up to 108 mm, 20 in bigger sizes).
Available in a wide pipe diameter range (50, 76, 89, 108, 133,159, 194 mm).
Plug end cap
Socket end cap
B.5B
B.6B
code
size
code
size
OM-B5B-050-000
OM-B5B-076-000
OM-B5B-089-000
OM-B5B-108-000
OM-B5B-133-000
OM-B5B-159-000
OM-B5B-194-000
50
76
89
108
133
159
194
OM-B6B-050-000
OM-B6B-076-000
OM-B6B-089-000
OM-B6B-108-000
OM-B6B-133-000
OM-B6B-159-000
OM-B6B-194-000
50
76
89
108
133
159
194
B.14
B.15
code
size
thread size
[mm]
code
size
thread size
[mm]
OM-B14-050-150
OM-B14-050-200
OM-B14-076-250
OM-B14-076-300
OM-B14-089-300
OM-B14-108-400
OM-B14-133-500
OM-B14-159-600
OM-B14-194-800
50
50
76
76
89
108
133
159
194
1.1/2
2
2.1/2
3
3
4
5
6
8
OM-B15-050-150
OM-B15-050-200
OM-B15-076-250
OM-B15-076-300
OM-B15-089-300
OM-B15-108-400
OM-B15-133-500
OM-B15-159-600
OM-B15-194-800
50
50
76
76
89
108
133
159
194
1.1/2
2
2.1/2
3
3
4
5
6
8
373

B.45
B.46
code
size
flange
DN
code
size
flange
DN
OM-B45-050-040
OM-B45-076-065
OM-B45-089-080
OM-B45-108-100
OM-B45-133-125
OM-B45-159-150
OM-B45-194-200
50
76
89
108
133
159
194
40
65
80
100
125
150
200
OM-B46-050-040
OM-B46-076-065
OM-B46-089-080
OM-B46-108-100
OM-B46-133-125
OM-B46-159-150
OM-B46-194-200
50
76
89
108
133
159
194
40
65
80
100
125
150
200
Plug with hose tail
B.7
B.8
code
size
hose I.D.
[mm]
code
size
hose I.D.
[mm]
OM-B7-050-050
OM-B7-076-063
OM-B7-076-076
OM-B7-089-076
OM-B7-089-089
OM-B7-108-100
OM-B7-108-108
OM-B7-133-125
OM-B7-159-150
OM-B7-159-159
OM-B7-194-200
50
76
76
89
89
108
108
133
159
159
194
50
63
76
76
89
100
108
125
150
159
200
OM-B8-050-050
OM-B8-076-063
OM-B8-076-076
OM-B8-089-076
OM-B8-089-089
OM-B8-108-100
OM-B8-108-108
OM-B8-133-125
OM-B8-159-150
OM-B8-159-159
OM-B8-194-200
50
76
76
89
89
108
108
133
159
159
194
50
63
76
76
89
100
108
125
150
159
200
Socket for PE pipe
Plug for PE pipe
B.51
B.52
code
size
hose diameter
[mm]
code
size
hose diameter
[mm]
OM-B51-050-063
OM-B51-076-063
OM-B51-089-110
OM-B51-108-110
50
76
89
108
63
63
110
110
OM-B52-050-063
OM-B52-076-063
OM-B52-089-110
OM-B52-108-110
50
76
89
108
63
63
110
110
374

Socket seal
Complete black steel coupling
B.3
B.1
code
size
code
size
OM-B3-050-000
OM-B3-076-000
OM-B3-089-000
OM-B3-108-000
OM-B3-133-000
OM-B3-159-000
OM-B3-194-000
50
76
89
108
133
159
194
OM-B1-050-000
OM-B1-076-000
OM-B1-089-000
OM-B1-108-000
OM-B1-133-000
OM-B1-159-000
OM-B1-194-000
50
76
89
108
133
159
194
Many other elements of BAUER system are also available. For more information, please contact
Sales or Technical Department of TUBES INTERNATIONAL.
B.30
B.25
B.30BIS
B.39
B.42
B.40
B.61
375

Lever couplings FERRARI
Material:
Galvanized steel
Seal:
NR-SBR
Working press.: 10 bar - sizes 48, 60 mm
9 bar - size 80 mm
8 bar - size 100 mm
7 bar - size 120 mm
6 bar - size 150 mm
FERRARI couplings (pipes and fittings) are widely used in farming, gardening, industry, construction, road and tunnel
Coupling design allows angular deflection of the connected coupling (max. 26 in small sizes, 20 in big sizes).
Available in a wide pipe diameter range (48, 60, 80, 100, 120, 150 mm), as a version with three hooks (for higher
working pressure) and made of AISI 304 steel.
Plug end cap
Socket end cap
F.5B
F.6B
code
size
code
size
OM-F5B-048-000
OM-F5B-060-000
OM-F5B-080-000
OM-F5B-100-000
OM-F5B-120-000
OM-F5B-150-000
48
60
80
100
120
150
OM-F6B-048-000
OM-F6B-060-000
OM-F6B-080-000
OM-F6B-100-000
OM-F6B-120-000
OM-F6B-150-000
48
60
80
100
120
150
Reducing socket with hose tail
Reducing plug with hose tail
F.10
F.11
code
size
hose I.D.
[mm]
code
size
hose I.D.
[mm]
OM-F10-060-050
OM-F10-060-063
OM-F10-080-060
OM-F10-080-076
OM-F10-100-080
OM-F10-100-090
OM-F10-100-102
OM-F10-120-100
OM-F10-120-125
60
60
80
80
100
100
100
120
120
50
63
60
76
80
90
102
100
125
OM-F11-060-050
OM-F11-060-063
OM-F11-080-060
OM-F11-080-076
OM-F11-100-080
OM-F11-100-090
OM-F11-100-102
OM-F11-120-100
OM-F11-120-125
60
60
80
80
100
100
100
120
120
50
63
60
76
80
90
102
100
125
376

Plug with hose tail
F.7
F.8
code
size
hose I.D.
[mm]
code
size
hose I.D.
[mm]
OM-F7-048-050
OM-F7-060-060
OM-F7-080-080
OM-F7-100-100
OM-F7-120-120
OM-F7-150-150
48
60
80
100
120
150
50
60
80
100
120
150
OM-F8-048-050
OM-F8-060-060
OM-F8-080-080
OM-F8-100-100
OM-F8-120-120
OM-F8-150-150
48
60
80
100
120
150
50
60
80
100
120
150
F.14
F.15
code
size
thread size
[mm]
code
size
thread size
[mm]
OM-F14-048-150
OM-F14-060-200
OM-F14-080-300
OM-F14-100-250
OM-F14-100-400
OM-F14-120-250
OM-F14-120-500
OM-F14-150-600
48
60
80
100
100
120
120
150
1.1/1
2
3
2.1/2
4
2.1/2
5
6
OM-F15-048-150
OM-F15-060-200
OM-F15-080-300
OM-F15-100-250
OM-F15-100-400
OM-F15-120-250
OM-F15-120-500
OM-F15-150-600
48
60
80
100
100
120
120
150
1.1/1
2
3
2.1/2
4
2.1/2
5
6
F.45
F.46
code
size
flange
DN
code
size
flange
DN
OM-F45-060-065
OM-F45-080-080
OM-F45-100-100
OM-F45-120-125
OM-F45-150-150
60
80
100
120
150
65
80
100
125
150
OM-F46-060-065
OM-F46-080-080
OM-F46-100-100
OM-F46-120-125
OM-F46-150-150
60
80
100
120
150
65
80
100
125
150
377

Socket for PE pipe
Plug for PE pipe
F.51
F.52
code
size
hose diameter
[mm]
code
size
hose diameter
[mm]
OM-F51-060-050
OM-F51-060-063
OM-F51-080-075
OM-F51-080-090
OM-F51-100-090
OM-F51-100-110
OM-F51-120-110
60
60
80
80
100
100
120
50
63
75
90
90
110
110
OM-F52-060-050
OM-F52-060-063
OM-F52-080-075
OM-F52-080-090
OM-F52-100-090
OM-F52-100-110
OM-F52-120-110
60
60
80
80
100
100
120
50
63
75
90
90
110
110
Many other elements of FERRARI system are also available. For more information, please contact
378
F.25
F.30
F.39
F.35
F.36
F.40

Lever couplings ANFOR
Material:
Galvanized steel
Seal:
NR-SBR
Working press.: 19 bar - size 60 mm
16 bar - size 80 mm
14 bar - size 100 mm
6 bar - size 200 mm
5 bar - sizes 250, 300, 400 mm
ANFOR couplings (pipes and fittings) are widely used in farming, gardening, industry, construction, road and tunnel
Coupling design allows angular deflection of the connected coupling (max. 22 in small sizes, 16 in big sizes).
Available in a wide pipe diameter range (60, 80, 100, 120, 150, 200, 250, 300, 400 mm) and as a version with
three hooks (for higher working pressure).
Plug end cap
Socket end cap
A.5B
A.6B
code
size
code
size
OM-A5B-060-000
OM-A5B-080-000
OM-A5B-100-000
OM-A5B-120-000
OM-A5B-150-000
OM-A5B-200-000
OM-A5B-250-000
OM-A5B-300-000
60
80
100
120
150
200
250
300
OM-A6B-060-000
OM-A6B-080-000
OM-A6B-100-000
OM-A6B-120-000
OM-A6B-150-000
OM-A6B-200-000
OM-A6B-250-000
OM-A6B-300-000
60
80
100
120
150
200
250
300
Plug with hose tail
A.7
A.8
code
size
hose I.D.
[mm]
code
size
hose I.D.
[mm]
OM-A7-060-060
OM-A7-080-080
OM-A7-100-100
OM-A7-120-120
OM-A7-150-150
OM-A7-200-200
OM-A7-250-250
OM-A7-300-300
OM-A7-400-400
60
80
100
120
150
200
250
300
400
60
80
100
120
150
200
250
300
400
OM-A8-060-060
OM-A8-080-080
OM-A8-100-100
OM-A8-120-120
OM-A8-150-150
OM-A8-200-200
OM-A8-250-250
OM-A8-300-300
OM-A8-400-400
60
80
100
120
150
200
250
300
400
60
80
100
120
150
200
250
300
400
379

Lever couplings ANFOR
A.14
A.15
code
size
thread size
[mm]
code
size
thread size
[mm]
OM-A14-060-200
OM-A14-080-300
OM-A14-100-400
OM-A14-120-500
OM-A14-150-600
OM-A14-200-800
60
80
100
120
150
200
2
3
4
5
6
8
OM-A15-060-200
OM-A15-080-300
OM-A15-100-400
OM-A15-120-500
OM-A15-150-600
OM-A15-200-800
60
80
100
120
150
200
2
3
4
5
6
8
A.45
A.46
code
size
flange
DN
code
size
flange
DN
OM-A45-060-065
OM-A45-080-080
OM-A45-100-100
OM-A45-120-125
OM-A45-150-150
OM-A45-200-200
OM-A45-250-250
OM-A45-300-300
OM-A45-400-400
60
80
100
120
150
200
250
300
400
65
80
100
125
150
200
250
300
400
OM-A46-060-065
OM-A46-080-080
OM-A46-100-100
OM-A46-120-125
OM-A46-150-150
OM-A46-200-200
OM-A46-250-250
OM-A46-300-300
OM-A46-400-400
60
80
100
120
150
200
250
300
400
65
80
100
125
150
200
250
300
400
Many other elements of ANFOR system are also available. For more information, please contact
A.25
380
A.30
A.36

MSL couplings with DIN 2817 safety clamps
Coupling material: St (carbon steel), SS (AISI 316Ti), Ms (brass), Al (aluminium)
Seal:
Polyurethane (for SS version - PTFE)
Working pressure: 25 bar (for Al version - 16 bar)
A complete hose coupling with aluminium safety clamp and female thread with a swivel nut (for NPT - fixed female
thread).
Safety clamps made of other materials and for other hose wall thickness are in INDUSTRIAL FITTINGS - clip,
clamps, ferrules chapter (only RS 636... and RS-637... clamps).
DN - hose inside diameter x hose wall thickness.
picture
code
DN
[mm]
seal
weight
[kg]
pic.
RS-120135050111
St
flat
0,18
SS
flat
0,18
RS-130135050133
RS-120135050310
1/2 BSP
13 x 5
(1/2)
RS-130135221433
RS-120135075122
Ms
flat
0,19
Ms
cone
0,19
1/2 NPT
St
thread
0,20
M22 x 1,5
Ms
cone
0,19
3/4 BSP
RS-120135075133
SS
flat
0,23
Ms
flat
0,24
RS-120196075111
St
flat
0,23
RS-120196075122
SS
flat
0,20
3/4 BSP
RS-120196075133
RS-130196075133
RS-120196075310
19 x 6
(3/4)
RS-130196301433
3/4 NPT
M30 x 1,5
RS-120196100122
1 BSP
RS-120196100133
Ms
flat
0,21
Ms
cone
0,22
St
thread
0,26
Ms
cone
0,27
SS
flat
0,24
1
1
Ms
flat
0,24
RS-120256100111
St
flat
0,32
RS-120256100122
SS
flat
0,28
1 BSP
RS-120256100133
RS-130256100133
RS-120256100310
RS-120256100733
RS-130256381433
25 x 6
(1)
RS-120256125122
Ms
flat
0,26
Ms
cone
0,27
1 NPT
St
thread
0,37
1 NPS
Ms
flat
0,26
M38 x 1,5
Ms
cone
0,39
St
flat
0,37
SS
flat
0,34
RS-120256125111
1.1/4 BSP
RS-120256125133
Ms
flat
0,32
RS-120256150122
SS
flat
0,43
1.1/2 BSP
RS-120256150133
RS-120326125111
RS-120326125122
material
RS-120135050122
RS-120135050133
thread
1.1/4 BSP
RS-120326125133
RS-130326125133
RS-120326125310
RS-120326125733
RS-130326451433
RS-120326150122
RS-120326150133
RS-120326200122
RS-120326200133
32 x 6
(1.1/4)
Ms
flat
0,42
St
flat
0,39
SS
flat
0,35
Ms
flat
0,33
Ms
cone
0,37
1.1/4 NPT
St
thread
0,45
1.1/4 NPS
Ms
flat
0,33
Ms
cone
0,49
SS
flat
0,44
M45 x 1,5
1.1/2 BSP
2 BSP
Ms
flat
0,41
SS
flat
0,56
Ms
flat
0,58
381

MSL couplings with DIN 2817 safety clamps
picture
code
RS-120356150133
RS-120356200133
DN
[mm]
35 x 6
thread
material
seal
weight
[kg]
pic.
1.1/2 BSP
Ms
flat
0,43
2 BSP
Ms
flat
0,58
St
flat
0,46
RS-120387150111
RS-120387150122
1.1/2 BSP
RS-120387150133
RS-130387150133
RS-120387150310
RS-120387150733
38 x 6,5
(1.1/2)
RS-130387521433
RS-120387200122
RS-120407150122
RS-120407200122
RS-120457200133
flat
0,40
cone
0,52
2 BSP
SS
flat
0,58
Ms
flat
0,55
SS
flat
0,55
Ms
flat
0,55
SS
flat
0,70
Ms
flat
0,65
2
2
flat
0,75
flat
0,85
RS-120508200122
SS
flat
0,71
2 BSP
50 x 8
(2)
RS-130508652433
Ms
flat
0,72
Ms
cone
0,74
2 NPT
St
thread
0,83
2 NPS
Ms
flat
0,72
Ms
cone
0,90
SS
flat
0,98
M65 x 2
RS-120508250122
2.1/2 BSP
RS-120508250133
RS-120657250122
RS-120657250133
RS-130657250133
RS-120657250733
2.1/2 BSP
63 x 8
65 x 7
(2.1/2)
Ms
flat
0,93
SS
flat
1,20
Ms
flat
1,20
Ms
cone
1,25
2.1/2 NPS
Ms
flat
1,30
RS-130657782433
M78 x 2
Ms
cone
1,45
RS-120657300133
3 BSP
Ms
flat
1,55
RS-120758300111
St
flat
1,40
RS-120758300122
SS
flat
1,52
3 BSP
RS-120758300133
RS-130758300133
RS-120758300733
RS-130758902433
75 x 8
(3)
RS-120758550522
RS-120758550533
RS-120758550544
RS-120808300133
RS-130808102433
80 x 8
RS-120108400122
RS-120108400733
RS-120108550511
RS-120108550522
RS-120108550533
RS-120108550544
100 x 8
(4)
Ms
flat
1,60
Ms
cone
1,65
3 NPS
Ms
flat
1,55
M90 x 2
Ms
cone
1,50
5.1/2
DIN 11
SS
flat
5,10
Ms
flat
5,30
Al
flat
2,45
3 BSP
Ms
flat
1,55
M100 x 2
Ms
cone
2,10
4 BSP
RS-120108400133
382
0,47
St
RS-120508200733
0,44
thread
Ms
RS-120508200310
cone
St
RS-120508200111
RS-130508200133
Ms
Ms
2 BSP
RS-120508200133
1
2
Ms
40 x 7
45 x 7
0,42
0,41
M52 x 1,5
1.1/2 BSP
RS-120407200133
flat
flat
1.1/2 NPS
2 BSP
RS-120387200133
RS-120407150133
1.1/2 NPT
SS
Ms
4 NPS
5.1/2
DIN 11
SS
flat
3,90
Ms
flat
3,85
Ms
flat
3,85
St
flat
6,20
SS
flat
5,00
Ms
flat
5,60
Al
flat
3,10

VSL couplings with DIN 2817 safety clamps
Coupling material: St (carbon steel), SS (AISI 316Ti), Ms (brass), Al (aluminium)
Working pressure: 25 bar (for Al version - 16 bar)
A complete hose coupling with an aluminium safety clamp and male thread.
Safety clamps made of other materials and for other hose wall thickness are in INDUSTRIAL FITTINGS - clip,
clamps, ferrules chapter (only RS 636... and RS-637... clamps).
picture
code
DN
[mm]
RS-320135050130
RS-320135050310
thread/flat
0,17
thread/flat
0,17
thread/flat
0,18
St
thread
0,18
SS
thread
0,18
RS-320135050330
Ms
thread
0,19
RS-320196075110
St
thread/flat
0,24
3/4 BSPT
RS-320196075130
RS-320196075310
SS
thread/flat
0,24
Ms
thread/flat
0,25
St
thread
0,24
SS
thread
0,24
RS-320196075330
Ms
thread
0,25
RS-320196100120
SS
flat
0,28
RS-320196075320
19 x 6
(3/4)
3/4 NPT
1 BSP
RS-320196100130
RS-320256100110
RS-320256100120
1 BSP
RS-320256100130
RS-320256100230
1 BSPT
RS-320256100310
RS-320256100320
RS-320256100330
RS-320256125120
25 x 6
(1)
1 NPT
1.1/4 BSP
RS-320256125130
RS-320256150120
1.1/2 BSP
RS-320256150130
RS-320256200120
2 BSP
RS-320256200130
RS-320326125110
RS-320326125120
RS-320326125230
RS-320326125310
RS-320326125320
RS-320326125330
32 x 6
(1.1/4)
RS-320326150120
RS-320326200120
RS-320356150130
RS-320356200130
35 x 6
0,29
flat
0,30
SS
flat
0,30
Ms
flat
0,30
Ms
thread/flat
0,33
St
thread
0,33
SS
thread
0,33
Ms
thread
0,34
SS
flat
0,39
Ms
flat
0,37
SS
flat
0,43
Ms
flat
0,45
SS
flat
0,63
Ms
flat
0,67
St
flat
0,37
flat
0,37
Ms
flat
0,38
1.1/4 BSPT
Ms
thread/flat
0,41
St
thread
0,39
1.1/4 NPT
SS
thread
0,39
Ms
thread
0,41
SS
flat
0,42
2 BSP
RS-320326200130
flat
St
SS
1.1/2 BSP
RS-320326150130
Ms
1.1/4 BSP
RS-320326125130
St
SS
Ms
1/2 NPT
RS-320196075120
pic.
1/2 BSPT
13 x 5
(1/2)
RS-320135050320
weight
[kg]
material
RS-320135050110
RS-320135050120
seal
thread
Ms
flat
0,39
SS
flat
0,58
Ms
flat
0,51
1.1/2 BSP
Ms
flat
0,44
2 BSP
Ms
flat
0,54
383

VSL couplings with DIN 2817 safety clamps
picture
material
seal
St
flat
weight
[kg]
0,39
1.1/2 BSP
SS
flat
0,40
Ms
flat
0,44
1.1/2 BSPT
Ms
thread/flat
0,46
St
thread
0,42
1.1/2 NPT
SS
thread
0,42
RS-320387150330
Ms
thread
0,44
RS-320387200120
SS
flat
0,52
code
DN
[mm]
thread
RS-320387150110
RS-320387150120
RS-320387150130
RS-320387150230
RS-320387150310
RS-320387150320
38 x 6,5
(1.1/2)
2 BSP
RS-320387200130
RS-320407150120
RS-320407150130
RS-320407200120
1.1/2 BSP
40 x 7
2 BSP
RS-320407200130
RS-320457200130
45 x 7
2 BSP
RS-320508200110
RS-320508200120
RS-320508201120
2 BSP
0,55
0,54
Ms
flat
0,56
SS
flat
0,66
Ms
flat
0,66
Ms
flat
0,82
St
flat
0,67
SS
flat
0,67
SS
flat
0,75
flat
0,73
PP
flat
0,33
Ms
thread/flat
0,76
St
thread
0,70
50 x 8
(2)
RS-320508200320
2 BSPT
2 NPT
RS-320508250120
2.1/2 BSP
RS-320508250130
RS-320657250120
2.1/2 BSP
RS-320657250130
RS-320657250230
RS-320657250320
RS-320657250330
63 x 8
65 x 7
(2.1/2)
RS-320657300120
2.1/2 BSPT
2.1/2 NPT
3 BSP
RS-320657300130
RS-320758300110
SS
thread
0,70
Ms
thread
0,78
SS
flat
0,98
Ms
flat
0,86
SS
flat
1,10
Ms
flat
1,10
Ms
thread/flat
1,20
SS
thread
1,20
Ms
thread
1,10
SS
flat
1,21
Ms
flat
1,25
St
flat
1,45
RS-320758300120
SS
flat
1,33
RS-320758301120
SS
flat
1,40
3 BSP
RS-320758300130
RS-320758300140
RS-320758300150
75 x 8
(3)
Ms
flat
1,40
Al
flat
0,81
PP
flat
0,62
3 BSPT
Ms
thread/flat
1,50
St
thread
1,95
3 NPT
SS
thread
1,45
RS-320758300330
Ms
thread
1,50
RS-320808300120
SS
flat
1,25
2
2
RS-320758300230
RS-320758300310
RS-320758300320
RS-320808300130
80 x 8
3 BSP
Ms
flat
1,30
RS-320108400110
St
flat
3,10
RS-320108400120
SS
flat
3,00
4 BSP
RS-320108400130
RS-320108400140
RS-320108400230
100 x 8
(4)
4 BSPT
RS-320108400310
RS-320108400320
RS-320108400330
384
flat
flat
Ms
RS-320508200330
Ms
SS
RS-320508200130
RS-320508200310
1
1
RS-320508200150
RS-320508200230
pic.
4 NPT
Ms
flat
3,21
Al
flat
2,05
Ms
thread/flat
3,26
St
thread
3,45
SS
thread
3,00
Ms
thread
3,26

Threaded couplings for liquid gas (LPG)
Coupling material: St (carbon steel), Ms (brass)
Seal:
NBR (only for position 6)
Working pressure: 25 bar
A complete hose coupling with an aluminium safety clamp and male or female thread. Adaptors with male thread
at both ends or with male thread and female thread with a swivel nut.
picture
code
DN / thread
thread
material
weight
[kg]
pic.
RS-320135050310
13x5
1/2 NPT
St
0,18
3/4 NPT
St
0,24
1 NPT
St
0,31
1 NPT
St
0,33
1.1/4 NPT
St
0,39
1 NPT
St
0,35
1.1/4 NPT
St
0,39
1.1/2 NPT
St
0,38
1.1/2 NPT
St
0,42
1.1/4 NPT
St
0,60
2 NPT
St
0,70
2 NPT
St
1,60
3 NPT
St
1,95
1/2 NPT
St
0,20
1.3/4 ACME
St/Ms
0,36
3/4 NPT
St
0,26
1 NPT
St
0,35
1.3/4 ACME
St/Ms
0,41
RS-320196075310
RS-320196100310
RS-320256100310
RS-320256125310
19x6
25x6
RS-320326100310
RS-320326125310
32x6
RS-320326150310
RS-320387150310
RS-320508125310
RS-320508200310
RS-320758200310
RS-320758300310
RS-120135050310
RS-120135175013
38x6,5
50x8
75x8
13x5
RS-120196075310
RS-120196100310
19x6
RS-120196175013
RS-120256100310
RS-120256175013
25x6
RS-120326100310
RS-120326125310
RS-120326175013
32x6
RS-120326225013
RS-120387150310
RS-120387225013
38x6,5
RS-120508125310
RS-120508200310
50x8
RS-120508325013
7
8
RS-120758300310
RS-120758325013
75x8
1 NPT
St
0,37
1.3/4 ACME
St/Ms
0,42
1 NPT
St
0,40
1.1/4 NPT
St
0,45
1.3/4 ACME
St/Ms
0,46
2.1/4 ACME
St/Ms
0,73
1.1/2 NPT
St
0,47
2.1/4 ACME
St/Ms
0,78
1.1/4 NPT
St
0,83
2 NPT
St
0,83
3.1/4 ACME
St/Ms
1,65
3 NPT
St
1,75
3.1/4 ACME
St/Ms
2,85
RS-410175175010
1.3/4 ACME
1.3/4 ACME
St
0,20
RS-410225225010
2.1/4 ACME
2.1/4 ACME
St
0,51
RS-410325325010
3.1/4 ACME
3.1/4 ACME
St
1,40
RS-160175100031
1.3/4 ACME
1 NPT
St/Ms
0,37
RS-160225125031
2.1/4 ACME
1.1/4 NPT
St/Ms
0,78
RS-160325200031
3.1/4 ACME
2 NPT
St/Ms
1,60
385

Threaded couplings for cryogenic gases - EIGA
Material:
SS (AISI 303 / AISI 304)

Ms - brass
Seal:
PTFE
Connections:
Female thread, welding neck,
flanged connection
Working temp.: Down to -196C
Operation
EIGA coupling halves are secured together when a coupler (hose unit) connects with an adaptor (tank unit). Female
thread Tr 90x8 (coupler) is then connected with male thread Tr 89x8 (adaptor). The coupler consists of a swivel
nut set on a pipe stub with the use of a ball bearing. The pipe stub can either have 2.1/2 female thread or 76.1 x
8 mm welding neck at its end.
Application
Loading and unloading of cryogenic liquefied gases such as CO2 , N2 , Ar, O2 and a few other. The couplings are
specific for each type of gas - they are coded using slots of special dimension on the coupler which mate only with
pins on the corresponding adaptor. This code systems prevents connecting the coupler of one gas e.g. oxygen
with the adaptor of the other e.g. nitrogen.
Standard
EIGA - EUROPEAN INDUSTRIAL GASES ASSOCIATION. EIGA couplings are manufactured according to EIGA
909/03/E standard (EIGA CRYOGENIC GASES COUPLINGS FOR TANKER FILLING) and meet the requirements
of EN 13371.
adaptor - tank unit

picture
Adaptor (with seal)
coupler - hose unit

code
medium
CO2
EV-830104070061
N2
EV-830104070062
Ar
EV-830004070064
flange
DN65/PN40
40
N2
Ar
EV-830004070063
O2
EV-110102000003
CO2
EV-110102000001
40
N2
Ar
EV-110102000002
O2
EV-120000060016
CO2, N2,
Ar, O2
40
EV-110106000000
Blank cap
EV-110206000000
EV-110006000011
386
seal
Ms
CO2
EV-830004070062
welding end
76,1x8 mm
material
O2
EV-830004070061
EV-110102000000
Adaptor seal
working press.
[bar]
EV-830104070064
EV-830104070063
Adaptor (without seal)
connection
nut code example (N2)
SS
PTFE
SS
PTFE
SS
-
PA 6
Ms

Threaded couplings for cryogenic gases - EIGA
picture
Complete coupler
code
EV-830103049065
medium
2.1/2 BSP
female thread
40
N2
Ar
O2
EV-830003052065
CO2
EV-830003050065
2.1/2 BSP
female thread
40
N2
Ar
EV-830003051065
O2
EV-830003052089
CO2
EV-830003049089
EV-830003050089
welding end
76,1x8 mm
CO2
N2
Ar
O2
CO2
N2
Ar
O2
EV-110111000003
2.1/2 BSP
female thread
SS
Ar
EV-120000000003
EV-120000000000
EV-120000000001
EV-120000000002
EV-110100000003
EV-110100000000
EV-110100000001
EV-110100000002
Ms
SS
40
O2
Coupler stub with thread
seal
N2
EV-830003051089
EV-120000000012
material
CO2
EV-830103051065
EV-830003049065
Coupler nut
work. press.
[bar]
EV-830103052065
EV-830103050065
Complete coupler
connection
40
40
CO2
N2
Ar
O2
Ms
SS
Ms
SS
Coupler stub with welding end

EV-110111000000
Blank plug
welding end
76,1x8 mm
40
CO2
N2
Ar
O2
EV-110207000000
SS
PA 6
-
EV-120000000135
Ms
Balls, blank plug - set

EV-120000000048
CO2
N2
Ar
O2
SS
EV-120000000031
Ms
Spanner
387

Threaded couplings - DN adaptors
Material: SS (AISI 316Ti), Ms (brass), Al (aluminium)
Adaptor with male thread at both ends.
picture
code
RS-410050050120
RS-410050050130
Ms
0,08
SS
0,13
Ms
0,13
SS
0,16
Ms
0,16
SS
0,25
Ms
0,21
RS-410200200120
SS
0,33
RS-410200200130
Ms
0,39
Ms
0,28
Ms
0,28
RS-430200200140
Al
0,10
RS-420200200140
Al
0,09
RS-410250250120
SS
0,55
RS-410250250130
Ms
0,77
Ms
0,43
Ms
0,37
RS-430250250140
Al
0,12
RS-420250250140
Al
0,10
RS-410300300120
SS
0,62
RS-410300300130
Ms
0,67
Ms
0,55
Ms
0,56
RS-430300300140
Al
0,19
RS-420300300140
Al
0,20
RS-410400400120
SS
1,05
RS-410400400130
Ms
1,70
Ms
1,05
Ms
0,85
RS-430400400140
Al
0,34
RS-420400400140
Al
0,33
Ms
5,15
Al
1,80
RS-410075075130
RS-410100100120
RS-410150150130
RS-420200200130
RS-430250250130
RS-420250250130
RS-430300300130
RS-420300300130
RS-430400400130
RS-420400400130
RS-410550550530
RS-410550550540
388
1
1
RS-430200200130
0,05
RS-410150150120
SS
0,05
RS-410125125130
pic.
0,07
RS-410125125120
weight
[kg]
Ms
RS-410100100130
1/2 BSP
material
SS
RS-410075075120
thread
3/4 BSP
1 BSP
1.1/4 BSP
1.1/2 BSP
2 BSP
2.1/2 BSP
3 BSP
4 BSP
5.1/2
DIN 11

Threaded couplings - RN adaptors
Material: SS (AISI 316Ti), Ms (brass), Al (aluminium)
Reducing adaptor with male thread at both ends.
picture
code
RS-440050075112
RS-440050075113
RS-440075100112
RS-440075100113
thread
1/2 BSP
3/4 BSP
RS-441100381143
1 BSP
M38 x 1,5
RS-440100125112
1.1/4 BSP
RS-440100125113
RS-440100150112
3/4 BSP
1 BSP
RS-440100150113
RS-440100200112
1.1/2 BSP
2 BSP
RS-440100200113
RS-441125451143
M45 x 1,5
RS-440125150112
RS-440125150113
1.1/4 BSP
RS-440125200112
2 BSP
RS-440125200113
RS-441150521143
RS-440150200112
M52 x 1,5
1.1/2 BSP
RS-440150200113
RS-441200652143
2 BSP
M65 x 2
RS-440200250112
2.1/2 BSP
RS-440200250113
RS-440200300112
1.1/2 BSP
2 BSP
RS-440200300113
3 BSP
RS-450200300113
RS-450200300114
RS-441250782143
RS-460250300112
RS-440250300113
M78 x 2
2.1/2 BSP
3 BSP
RS-450250300113
RS-441300902143
M90 x 2
RS-460300400112
RS-450300400113
RS-450300400114
4 BSP
3 BSP
seal
weight
[kg]
pic.
SS
flat
0,08
Ms
flat
0,09
SS
flat
0,13
Ms
flat
0,14
Ms
flat/cone
0,16
SS
flat
0,20
Ms
flat
0,22
SS
flat
0,25
Ms
flat
0,22
SS
flat
0,47
Ms
flat
0,31
Ms
flat/cone
0,22
SS
flat
0,22
Ms
flat
0,24
SS
flat
0,41
Ms
flat
0,34
Ms
flat/cone
0,30
SS
flat
0,35
Ms
flat
0,32
Ms
flat/cone
0,57
SS
flat
0,69
Ms
flat
0,62
SS
flat
0,72
Ms
flat
0,66
Ms
flat
0,49
Al
flat
0,17
Ms
flat/cone
0,49
SS
flat
0,59
Ms
flat
0,85
Ms
flat
0,55
Ms
flat/cone
0,77
SS
flat
1,05
Ms
flat
0,79
Al
flat
0,27
SS
flat
3,75
Ms
flat
2,90
RS-440300550154
Al
flat
1,00
RS-440400550152
SS
flat
2,95
RS-440300550152
5.1/2
DIN 11
RS-440300550153
material
RS-440400550153
RS-440400550154
4 BSP
5.1/2
DIN 11
Ms
flat
4,45
Al
flat
1,35
389

Threaded couplings - RS adaptors
Material:
Seal:
SS (AISI 316/316 Ti), Ms (brass), Al (aluminium)

Polyurethane (for SS version - PTFE)
Reducing adaptor with female and male thread.

picture
code
female
thread
RS-500050050113
RS-500050075112
1/2 BSP
1/2 BSP
RS-500050075113
RS-500075075113
RS-500075100112
3/4 BSP
RS-500100075112
material
seal
weight
[kg]
pic.
Ms
flat
0,06
SS
flat
0,10
Ms
flat
0,11
Ms
flat
0,07
SS
flat
0,14
Ms
flat
0,13
SS
flat
0,09
Ms
flat
0,09
RS-500100100113
1 BSP
Ms
flat
0,08
RS-500100100133
1 NPT
Ms
flat/thread
0,11
SS
flat
0,14
Ms
flat
0,15
SS
flat
0,21
Ms
flat
0,23
SS
flat
0,32
Ms
flat
0,24
Ms
thread/flat
0,15
SS
flat
0,13
Ms
flat
0,14
Ms
flat
0,15
SS
flat
0,22
Ms
flat
0,24
SS
flat
0,27
Ms
flat
0,31
SS
flat
0,23
Ms
flat
0,25
SS
flat
0,22
Ms
flat
0,23
Ms
flat
0,25
SS
flat
0,21
Ms
flat
0,27
SS
flat
0,27
Ms
flat
0,30
SS
flat
0,25
Ms
flat
0,32
SS
flat
0,26
Ms
flat
0,35
2 BSP
Ms
flat
0,37
2 NPT
Ms
flat/thread
0,52
SS
flat
0,40
Ms
flat
0,52
SS
flat
0,63
Ms
flat
0,41
Ms
thread/flat
0,39
RS-500100125112
RS-500100125113
1 BSP
RS-500100150112
RS-500100200112
2 BSP
RS-500100200113
RS-500100100313
1 NPT
RS-500125100112
RS-500125125113
1.1/4 BSP
1.1/4 BSP
RS-500125150113
RS-500125200112
RS-500150100112
1 BSP
RS-500150100113
RS-500150125112
1.1/2 BSP
RS-500150150113
2 BSP
RS-500150200113
RS-500200100112
1 BSP
RS-500200100113
RS-500200125112
1.1/4 BSP
RS-500200125113
RS-500200150112
RS-500200200113
1.1/2 BSP
2 BSP
RS-500200200133
RS-500200250112
G 2.1/2
RS-500200250113
RS-500200300112
3 BSP
RS-500200300113
RS-500200200313
1.1/4 BSP
1.1/2 BSP
RS-500150200112
RS-500200150113
1.1/2 BSP
2 BSP
RS-500125200113
RS-500150125113
1 BSP
1 BSP
RS-500125100113
RS-500125150112
1.1/4 BSP
1.1/2 BSP
RS-500100150113
390
1 BSP
3/4 BSP
RS-500100075113
3/4 BSP
3/4 BSP
RS-500075100113
male
thread
2 NPT
2 BSP

Threaded couplings - RS adaptors
picture
material
seal
weight
[kg]
pic.
SS
flat
0,44
Ms
flat
0,53
Ms
flat
0,64
SS
flat
0,50
Ms
flat
0,48
SS
flat
0,53
Ms
flat
0,85
SS
flat
0,56
Ms
flat
0,82
3 BSP
Ms
flat
0,78
3 NPT
Ms
flat/thread
0,87
SS
flat
1,05
Ms
flat
0,98
RS-510300400113
Ms
flat
0,93
RS-500300550152
SS
flat
3,40
Ms
flat
2,50
Al
flat
0,89
Ms
thread/flat
0,96
SS
flat
0,93
Ms
flat
1,15
G 4
Ms
flat
1,60
4 NPT
Ms
flat/thread
1,35
SS
flat
2,95
Ms
flat
3,55
Al
flat
1,45
Ms
thread/flat
1,55
SS
flat
2,60
Ms
flat
2,90
SS
flat
2,55
Ms
flat
2,95
Al
flat
0,96
SS
flat
2,40
Ms
flat
2,85
Al
flat
0,97
code
female
thread
RS-500250200112
2 BSP
RS-500250200113
RS-500250250113
2.1/2 BSP
RS-500250300112
RS-500300200112
2 BSP
RS-500300200113
RS-500300250112
2.1/2 BSP
RS-500300250113
RS-500300300113
RS-500300300133
RS-500300400112
3 BSP
RS-500300400113
4 BSP
RS-500300550153
2.1/2 BSP
3 BSP
RS-500250300113
male
thread
5.1/2 DIN 11
RS-500300550154
RS-500300300313
3 NPT
RS-500400300112
3 BSP
RS-500400300113
RS-500400400113
RS-500400400133
3 BSP
4 BSP
RS-500400550152
5.1/2
DIN 11
RS-500400550153
RS-500400550154
RS-500400400313
4 NPT
RS-500550200512
4 BSP
2 BSP
RS-500550200513
RS-500550300512
RS-500550300513
RS-500550300514
5.1/2
DIN 11
3 BSP
RS-500550400512
RS-500550400513
RS-500550400514
4 BSP
391

Flange couplings
hose fitting with
swivel flange
pipeline connection
hose fitting with

fixed flange
pipeline connection
RS safety clamps
flexible hose
seal
seal
The application of flange couplings in industry is one of the most extensive. First of all, the flange couplings are
utilized to connect lengths of industrial pipelines, yet they are also used for flexible hose connection.
The most frequently used steel flanges are manufactured according to the requirements of standards which
precisely specify their types, dimensions, types of sealing surface, steel types, acceptable values of pressure at
specific temperature.
PN flanges meet the requirements of:
-
-
-
-
EN 1092-1:2007 - the recent European Standard,

ISO 7005-1,
set of old German DIN standards (e.g. DIN2633),
old Polish standards e.g. PN-87/H-74731.
PN and the number that follows e.g. PN16, indicates mechanical properties and flange dimensions - nominal
pressure. It is not a direct equivalent of permissible working pressure, because the last depends on the flange
material and temperature of the medium. For medium temperature +20C the permissible working pressure of
PN16 flange amounts to 16 bar. The standards define working parameters for other temperatures. PN-marked
flanges are manufactured for the following PN values:
PN2,5
PN6
PN10
PN16
PN25
PN40
PN63
PN100
PN160
PN250
PN320
PN400
PN10, PN16 (most often), PN25 and PN40 flanges are most frequently used to connect with flexible hose assemblies.
Flange dimensions according to different PN are sometimes the same, e.g.:
DN
PN6
from 10 to 40
PN6
from 50 to 150
PN6
above 150
PN6
PN10
PN16
PN25
use dimensions
PN40
use dimensions
PN16
PN10
use dimensions
PN40
use dimensions
PN40
use dimensions
PN40
PN25
PN16
PN16
PN40
PN40
PN40
PN40
ASA 150 and ASA 300 flanges (according to American ANSI B16.5 standard). The numbers 150 and 300 indicate
the class of mechanical properties and dimensions. The class 150 corresponds to PN20, and 300 corresponds
to PN50.
The basic mating dimensions (flange diameters and hole parameters: number, diameters and position of bolt holes)
for PN and ASA flanges are given in the table Mating dimensions for PN and ASA flanges. Other dimensions,
e.g. thickness should be defined according to the standard.
392

Mating dimensions of PN and ASA flanges
D - outside flange diameter
K - diameter of bolt circle
d1 - face diameter
L - diameter of bolt hole
PN flange dimensions given by EN 1092-1. ASA flange dimensions given by ASME/ANSI B16.5:1996.
nominal diameters
[mm]
15
20
25
32
40
50
65
80
100
125
150
200
250
[inch]
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
8
10
PN6
D
80
90
100
120
130
140
160
190
210
240
265
320
375
K
55
65
75
90
100
110
130
150
170
200
225
280
335
d1
40
50
60
70
80
90
110
128
148
178
202
258
312
D
95
105
115
140
150
165
185
200
235
270
300
360
425
K
65
75
85
100
110
125
145
160
190
220
250
310
370
d1
45
58
68
78
88
102
122
138
162
188
218
278
335
D
88,9
98,4
108,0
117,5
127,0
152,4
177,8
190,5
228,6
254,0
279,4
342,9
406,4
K
60,3
69,9
79,4
88,9
98,4
120,7
139,7
152,4
190,5
215,9
241,3
298,5
362,0
d1
34,9
42,9
50,8
63,5
73,0
92,1
104,8
127,0
157,2
185,7
215,9
269,9
323,9
nominal diameters
[mm]
15
20
25
32
40
50
65
80
100
125
150
200
250
[inch]
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
8
10
[inch]
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
8
10
bolts no.
4
4
4
4
4
4
4
4
4
8
8
8
12
thread
M10
M10
M10
M12
M12
M12
M12
M16
M16
M16
M16
M16
M16
D
95
105
115
140
150
165
185
200
220
250
285
340
395/405
K
65
75
85
100
110
125
145
160
180
210
240
295
350/355
d1
45
58
68
78
88
102
122
138
158
188
212
268
320
L
14
14
14
18
18
18
18
18
22
26
26
26
30
bolts no.
4
4
4
4
4
4
8
8
8
8
8
12
12
thread
M12
M12
M12
M16
M16
M16
M16
M16
M20
M24
M24
M24
M27
D
95
105
115
140
150
165
185
200
235
270
300
375
450
K
65
75
85
100
110
125
145
160
190
220
250
320
385
d1
45
58
68
78
88
102
122
138
162
188
218
285
345
bolts no.
4
4
4
4
4
4
4
4
8
8
8
8
12
thread
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
7/8
D
95,3
117,5
123,8
133,4
155,6
165,1
190,5
209,6
254,0
279,4
317,5
381,0
444,5
K
66,7
82,5
88,9
98,4
114,3
127,0
149,2
168,3
200,0
235,0
269,9
330,2
387,3
d1
34,9
42,9
50,8
63,5
73,0
92,1
104,8
127,0
157,2
185,7
215,9
269,9
323,9
PN25
nominal diameters
[mm]
15
20
25
32
40
50
65
80
100
125
150
200
250
PN10/16
L
11
11
11
14
14
14
14
18
18
18
18
18
18
L
14
14
14
18
18
18
18
18
18
18
22
22
22/26
bolts no.
thread
4
M12
4
M12
4
M12
4
M16
4
M16
4
M16
8
M16
8
M16
8
M16
8
M16
8
M20
8/12
M20
12
M20/M24
PN40
ASA 150
L
15,9
15,9
15,9
15,9
15,9
19
19
19
19
22,2
22,2
22,2
25,4
L
14
14
14
18
18
18
18
18
22
26
26
30
33
bolts no.
4
4
4
4
4
4
8
8
8
8
8
12
12
thread
M12
M12
M12
M16
M16
M16
M16
M16
M20
M24
M24
M27
M30
bolts no.
4
4
4
4
4
8
8
8
8
8
12
12
16
thread
1/2
5/8
5/8
5/8
3/4
5/8
3/4
3/4
3/4
3/4
3/4
7/8
1
ASA 300
L
15,9
19
19
19
22,2
19
22,2
22,2
22,2
22,2
22,2
25,4
28,6
393

PN flange types (according to EN 1092-1)
01
11
32/02
34/04
05
33/02
35/02
36/02
37/02
12
13
01
plate flange for welding
33
lapped end pipe
11
weld-neck flange
35
weld collar with long neck
02
loose plate flange (swivel)
36
pressed collar with long neck
04
loose plate flange (swivel)
37
pressed collar
05
blank flange
12
hubbed slip-on flange for welding
32
weld-on plate collar
13
hubbed threaded flange
34
weld-neck collar
21
integral flange
21
Sealing surface:
Flanges can have different sealing surface of their faces depending on the sealing applied.
Sealing surface of PN flanges (according to EN 1092-1):
A
A
B
C
D
B (B1 or B2)
flat
raised face
tongue
groove
E
F
G
H
spigot
recess
O-ring spigot
O-ring groove
Type B1 with raised face is the most frequently used. The seal face should be grooved - a result of turning - to
ensure surface roughness compliant with the standard.
marking
Flange marking:
All flanges should be clearly and permanently marked. Marking should include:
flange manufacturers name or trade mark, number of the standard, flange type
number, DN, PN number, material, heat number. The marking should be stamped
on the flange outer rim.
Marking example:
XXX/EN1092-1/11/DN150/PN40/S235JR/12345
face
394

Flange hose fittings - assembly
Assemble with RS-636... and RS-637... safety clamps described

in INDUSTRIAL FITTINGS - clip, clamps, ferrules chapter. TK-RKSS and TK - RKOPS flange fittings are sold without
clamps, which should be separately selected. FSL flange couplings are supplied with safety clamps as a set.
TK-RKSS and TK-RKOPS flange fittings can be crimped with TI-LR... and TI-LDR... ferrules described in INDUSTRIAL FITTINGS - clip, clamps, ferrules chapter.
TK-CKSS and TK-CKOPS flange fittings and FRS flange couplings should be assembled with adequate worm-drive clamps
or band-it system described in INDUSTRIAL FITTINGS clip, clamps, ferrules.
Rubber steam hoses should only be used with special flanges and clamps, described in Steam hoses
section.
Flange fittings for steel, composite and PTFE hoses are described in respective sections.
395

EN1092-1 PN16 flanges
Material: carbon steel, AISI 304 steel (add SS to the code), AISI 316 steel (add SS316 to the code).
01B
32B
TK-KOPP
02
TK-KO-02
TK-KSS
TK-KSP
DN
15
20
25
32
40
50
65
80
100
125
150
34B
11B
04
TK-KOPS
TK-KO
code
01B type
TK-KSP-015
TK-KSP-020
TK-KSP-025
TK-KSP-032
TK-KSP-040
TK-KSP-050
TK-KSP-065
TK-KSP-080
TK-KSP-100
TK-KSP-125
TK-KSP-150
32B type
TK-KOPP-015
TK-KOPP-020
TK-KOPP-025
TK-KOPP-032
TK-KOPP-040
TK-KOPP-050
TK-KOPP-065
TK-KOPP-080
TK-KOPP-100
TK-KOPP-125
TK-KOPP-150
02 type
TK-KO-02-015
TK-KO-02-020
TK-KO-02-025
TK-KO-02-032
TK-KO-02-040
TK-KO-02-050
TK-KO-02-065
TK-KO-02-080
TK-KO-02-100
TK-KO-02-125
TK-KO-02-150
11B type
TK-KSS-015
TK-KSS-020
TK-KSS-025
TK-KSS-032
TK-KSS-040
TK-KSS-050
TK-KSS-065
TK-KSS-080
TK-KSS-100
TK-KSS-125
TK-KSS-150
34B type
TK-KOPS-015
TK-KOPS-020
TK-KOPS-025
TK-KOPS-032
TK-KOPS-040
TK-KOPS-050
TK-KOPS-065
TK-KOPS-080
TK-KOPS-100
TK-KOPS-125
TK-KOPS-150
04 type
TK-KO-015
TK-KO-020
TK-KO-025
TK-KO-032
TK-KO-040
TK-KO-050
TK-KO-065
TK-KO-080
TK-KO-100
TK-KO-125
TK-KO-150
Weld-in pipe stubs for flanges

B
TK-WC
TK-WRS
DN
code
hose I.D.
[mm]
d
[mm]
type
DN
code
hose I.D.
[mm]
d
[mm]
25
32
40
50
65
80
80
100
125
150
200
250
TK-WC-025
TK-WC-032
TK-WC-040
TK-WC-050
TK-WC-065
TK-WC-080-076
TK-WC-080-080
TK-WC-100
TK-WC-125
TK-WC-150
TK-WC-200
TK-WC-250
25
32
38-40
50-51
63-65
75-76
80
100-102
125-127
150-152
200-203
250-254
33,7
42,4
48,3
60,3
76,1
88,9
88,9
114,3
139,7
168,3
219,1
273,0
A
A
A
A
A
A
A
B
B
B
B
B
15
20
25
32
40
40
50
50
65
65
80
80
100
100
125
125
150
150
200
200
TK-WRS-015-013
TK-WRS-020-019
TK-WRS-025-025
TK-WRS-032-032
TK-WRS-040-038
TK-WRS-040-040
TK-WRS-050-050
TK-WRS-050-051
TK-WRS-065-063
TK-WRS-065-065
TK-WRS-080-076
TK-WRS-080-080
TK-WRS-100-100
TK-WRS-100-102
TK-WRS-125-125
TK-WRS-125-127
TK-WRS-150-150
TK-WRS-150-152
TK-WRS-200-200
TK-WRS-200-203
13
19
25
32
38
40
50
51
63
65
76
80
100
102
125
127
150
152
200
203
21,3
26,9
33,7
42,4
48,3
48,3
60,3
60,3
76,1
76,1
88,9
88,9
114,3
114,3
139,7
139,7
168,3
168,3
219,1
219,1
Material: carbon steel, AISI 304 steel (add SS to the code), AISI
316 steel (add SS316 to the code).
Working pressure 10 bar (type TK-WC), 25 bar (type TK-WRS).
- assemble with clamps (type TK-WC),
- assemble with RS safety clamps or crimp with TI-LR, TI-LDR
ferrules (type TK-WRS).
396

Flange fittings for rubber and plastic hoses
Material: carbon steel, AISI 304 steel (add SS to the code), AISI 316 steel (add SS316 to the code). Flanges
according to EN1092-1 PN16 - assemble with clamps. Working pressure 10 bar.
TK-CKSS
TK-KO
TK-CKOPS
DN
fitting with fixed

neck flange
25
fitting with swivel flange, neck face
hose I.D.
[mm]
type
stub
flange
TK-CKSS-025
TK-CKOPS-025
TK-KO-025
25
32
TK-CKSS-032
TK-CKOPS-032
TK-KO-032
32
40
TK-CKSS-040
TK-CKOPS-040
TK-KO-040
38-40
50
TK-CKSS-050
TK-CKOPS-050
TK-KO-050
50-51
65
TK-CKSS-065
TK-CKOPS-065
TK-KO-065
63-65
80
TK-CKSS-080-076
TK-CKOPS-080-076
TK-KO-080
75-76
80
TK-CKSS-080-080
TK-CKOPS-080-080
TK-KO-080
80
100
TK-CKSS-100
TK-CKOPS-100
TK-KO-100
100-102
125
TK-CKSS-125
TK-CKOPS-125
TK-KO-125
125-127
150
TK-CKSS-150
TK-CKOPS-150
TK-KO-150
150-152
200
TK-CKSS-200
TK-CKOPS-200
TK-KO-200
200-203
250
TK-CKSS-250
TK-CKOPS-250
TK-KO-250
250-254
Material: carbon steel, AISI 304 steel (add SS to the code), AISI 316 steel (add SS316 to the code).
Flanges according to EN1092-1 PN16, fittings according to EN14420-4. - assemble with RS safety clamps or crimp
with TI-LR, TI-LDR ferrules. Working pressure up to 25 bar.
TK-RKSS
TK-KO
TK-RKOPS
fitting with swivel flange, neck face
DN
fitting with fixed

neck flange
hose I.D.
[mm]
stub
flange
15
TK-RKSS-015-013
TK-RKOPS-015-013
TK-KO-015
13
20
TK-RKSS-020-019
TK-RKOPS-020-019
TK-KO-020
19
25
TK-RKSS-025-025
TK-RKOPS-025-025
TK-KO-025
25
32
TK-RKSS-032-032
TK-RKOPS-032-032
TK-KO-032
32
40
TK-RKSS-040-038
TK-RKOPS-040-038
TK-KO-040
38
40
TK-RKSS-040-040
TK-RKOPS-040-040
TK-KO-040
40
50
TK-RKSS-050-050
TK-RKOPS-050-050
TK-KO-050
50
50
TK-RKSS-050-051
TK-RKOPS-050-051
TK-KO-050
51
65
TK-RKSS-065-063
TK-RKOPS-065-063
TK-KO-065
63
65
TK-RKSS-065-065
TK-RKOPS-065-065
TK-KO-065
65
80
TK-RKSS-080-076
TK-RKOPS-080-076
TK-KO-080
76
80
TK-RKSS-080-080
TK-RKOPS-080-080
TK-KO-080
80
100
TK-RKSS-100-100
TK-RKOPS-100-100
TK-KO-100
100
100
TK-RKSS-100-102
TK-RKOPS-100-102
TK-KO-100
102
125
TK-RKSS-125-125
TK-RKOPS-125-125
TK-KO-125
125
125
TK-RKSS-125-127
TK-RKOPS-125-127
TK-KO-125
127
150
TK-RKSS-150-150
TK-RKOPS-150-150
TK-KO-150
150
150
TK-RKSS-150-152
TK-RKOPS-150-152
TK-KO-150
152
200
TK-RKSS-200-200
TK-RKOPS-200-200
TK-KO-200
200
200
TK-RKSS-200-203
TK-RKOPS-200-203
TK-KO-200
203
397

FSL flange couplings with DIN 2817 safety clamps
Coupling material: St (carbon steel), SS (AISI 316Ti), Ms (brass), Al (aluminium), PP (polypropylene)

Working pressure: 25 bar (for Al version - 16 bar, for PP version - 10 bar)
A complete hose coupling with a fixed/swivel flange at the end, supplied as a set with an aluminium safety clamp.
The safety clamps made of other materials and for different hose wall thickness are described in INDUSTRIAL
FITTINGS - clip, clamps, ferrules (only RS-636... and RS-637... clamps).
picture
RS-950013005211
St
weight
[kg]
1,10
RS-960013005210
St
1,00
SS/St
1,10
SS
1,10
RS-960013005220
SS
1,00
RS-950013005411
St
1,20
RS-960013005410
St
1,10
SS/St
1,20
SS
1,20
RS-960013005420
SS
1,10
RS-950013005711
St
0,80
RS-960013005710
St
1,20
SS/St
0,80
SS
0,80
RS-960013005720
SS
1,20
RS-950019006211
St
1,30
RS-960019006210
St
1,20
SS/St
1,30
SS
1,30
RS-960019006220
SS
1,20
RS-950019006411
St
1,40
RS-960019006410
St
1,30
SS/St
1,40
SS
1,40
SS
1,30
RS-950019006711
St
1,00
RS-960019006710
St
1,20
SS/St
1,00
SS
1,00
SS
1,20
St
1,50
St
1,70
RS-950025006211
St
1,70
RS-960025006210
St
1,50
RS-950025006221
SS/St
1,70
SS
1,70
SS
1,50
RS-950025006251
PP/St
1,20
RS-950025006255
PP
0,60
RS-950025006411
St
1,90
St
1,60
SS/St
1,90
SS
1,90
RS-960025006420
SS
1,60
RS-950025006711
St
1,40
RS-960025006710
St
1,70
SS/St
1,40
SS
1,40
SS
1,70
code
DN
[mm]
DN 15
PN 10/16
RS-950013005221
RS-950013005222
RS-950013005421
RS-950013005422
13 x 5
(1/2)
RS-950013005722
DN 20
PN 10/16
RS-950019006221
RS-950019006222
swivel flange
RS-950019006421
RS-950019006422
RS-960019006420
DN 15
PN 25/40
ASA 150
1/2
RS-950013005721
flange
19 x 6
(3/4)
DN 20
PN 25/40
ASA 150
3/4
RS-950019006721
RS-950019006722
RS-960019006720
RS-950019006811
ASA 300
3/4
RS-960019006810
DN 25
PN 10/16
RS-950025006222
RS-960025006220
2
fixed flange
RS-960025006410
RS-950025006421
RS-950025006422
RS-950025006721
RS-950025006722
RS-960025006720
398
25 x 6
(1)
DN 25
PN 25/40
ASA 150
1
material
pic.
1

picture
flange
material
ASA 300
1
St
weight
[kg]
1,90
St
2,10
RS-950032006211
St
2,30
RS-960032006210
St
2,00
RS-950032006221
SS/St
2,30
SS
2,30
SS
2,00
RS-950032006251
PP/St
1,70
RS-950032006255
PP
0,90
RS-950032006411
St
2,60
RS-960032006410
St
2,20
SS/St
2,60
SS
2,60
RS-960032006420
SS
2,20
RS-950032006711
St
1,80
RS-960032006710
St
1,70
SS/St
1,80
SS
1,80
SS
1,70
St
2,40
St
2,70
RS-950038007211
St
2,80
RS-960038007210
St
2,30
RS-950038007221
SS/St
2,80
SS
2,80
SS
2,30
RS-950038007251
PP/St
2,00
RS-950038007255
PP
0,90
RS-950038007411
St
3,00
RS-960038007410
St
2,80
SS/St
3,00
SS
3,00
RS-960038007420
SS
2,80
RS-950038007711
St
2,30
RS-960038007710
St
2,20
SS/St
2,30
SS
2,30
SS
2,20
St
3,40
St
3,70
RS-950040007211
St
2,90
RS-960040007210
St
2,40
RS-950040007221
SS/St
2,90
SS
2,90
SS
2,40
PP/St
2,10
PP
1,00
St
3,10
St
2,90
RS-950040007711
St
2,50
RS-960040007710
St
2,40
SS/St
2,50
SS
2,50
SS
2,40
code
RS-950025006811
RS-960025006810
DN
[mm]
25 x 6
(1)
DN 32
PN 10/16
RS-950032006222
RS-960032006220
RS-950032006421
RS-950032006422
32 x 6
(1.1/4)
DN 32
PN 25/40
ASA 150
1.1/4
RS-950032006721
RS-950032006722
RS-960032006720
RS-950032006811
1
swivel flange
ASA 300
1.1/4
RS-960032006810
DN 40
P 10/16
RS-950038007222
RS-960038007220
RS-950038007421
RS-950038007422
38 x 6,5
(1.1/2)
DN 40
PN 25/40
ASA 150
1.1/2
RS-950038007721
RS-950038007722
RS-960038007720
RS-950038007811
ASA 300
1.1/2
RS-960038007810
2
fixed flange
DN 40
PN 10/16
RS-950040007222
RS-960040007220
RS-950040007251
RS-950040007255
RS-950040007411
RS-960040007410
RS-950040007721
RS-95004000772
RS-96004000720
40 x 7
DN 40
PN 25/40
ASA 150
1.1/2
pic.
1
399

picture
RS-950050008211
St
weight
[kg]
3,60
RS-960050008210
St
3,20
RS-950050008221
SS/St
3,60
RS-950050008222
SS
3,60
RS-960050008220
SS
3,20
Ms/St
3,40
Ms
3,60
RS-950050008241
Al/St
2,70
RS-950050008244
Al
1,30
RS-950050008251
PP/St
2,40
RS-950050008255
PP
1,10
St
4,20
St
3,50
SS/St
4,20
SS
4,20
RS-960050008420
SS
3,50
RS-950050008711
St
3,50
RS-960050008710
St
3,40
SS/St
3,50
SS
3,50
RS-960050008720
SS
3,40
RS-950050008811
St
4,20
St
4,70
RS-950065007211
St
4,60
RS-960065007210
St
4,10
RS-950065007221
SS/St
4,60
RS-950065007222
SS
4,60
RS-960065007220
SS
4,10
Ms/St
4,50
Ms
4,70
RS-950065007241
Al/St
3,40
RS-950065007244
Al
1,80
RS-950065007251
PP/St
3,10
RS-950065007255
PP
1,70
St
5,30
St
4,80
SS/St
5,30
SS
5,30
RS-960065007420
SS
4,80
RS-950065007711
St
5,40
RS-960065007710
St
4,60
SS/St
5,40
SS
5,40
SS
4,60
St
6,20
St
6,40
RS-950075008211
St
6,10
RS-960075008210
St
4,90
RS-950075008221
SS/St
6,10
SS
6,10
SS
4,90
RS-950075008231
Ms/St
5,70
RS-950075008233
Ms
5,90
code
DN
[mm]
DN 50
PN 10/16
RS-950050008231
RS-950050008233
RS-950050008411
RS-960050008410
50 x 8
(2)
DN 50
PN 25/40
RS-950050008421
RS-950050008422
1
swivel flange
ASA 150
2
RS-950050008721
RS-950050008722
ASA 300
2
RS-960050008810
DN 65
PN 10/16
RS-950065007231
RS-950065007233
RS-950065007411
RS-960065007410
63 x 8
65 x 7
(2.1/2)
DN 65
PN 25/40
RS-950065007421
RS-950065007422
ASA 150
2.1/2
RS-950065007721
2
fixed flange
RS-950065007722
RS-960065007720
RS-950065007811
ASA 300
2.1/2
RS-960065007810
RS-950075008222
RS-960075008220
400
flange
75 x 8
(3)
DN 80
PN 10/16
material
pic.
1

picture
RS-950075008241
Al/St
weight
[kg]
4,30
RS-950075008244
Al
2,30
PP/St
3,80
RS-950075008255
PP
2,00
RS-950075008411
St
6,60
code
DN
[mm]
flange
DN 80
PN 10/16
RS-950075008251
RS-960075008410
5,90
6,60
SS
6,60
SS
5,90
RS-950075008711
St
5,50
RS-960075008710
St
5,70
SS/St
5,50
SS
5,50
SS
5,70
St
7,50
St
8,10
RS-960075008420
75 x 8
(3)
DN 80
PN25/40
ASA 150
3
RS-950075008721
RS-950075008722
RS-960075008720
RS-950075008811
ASA 300
3
RS-960075008810
RS-950080008211
St
6,20
RS-960080008210
St
5,00
RS-950080008221
SS/St
6,20
RS-950080008222
SS
6,20
SS
5,00
Al/St
4,30
RS-950080008244
Al
2,30
RS-950080008251
PP/St
3,80
PP
2,00
St
6,70
DN 80
PN 10/16
RS-960080008220
RS-950080008241
RS-950080008255
80 x 8
RS-950080008411
DN 80
PN25/40
RS-960080008410
St
6,00
RS-950080008711
St
5,60
RS-960080008710
St
5,80
SS/St
5,60
SS
5,60
RS-960080008720
SS
5,80
RS-950100008211
St
8,40
RS-960100008210
St
7,00
RS-950100008221
SS/St
8,40
RS-950100008222
SS
8,40
RS-960100008220
SS
7,00
Ms/St
8,00
Ms
8,30
RS-950100008241
Al/St
5,60
RS-950100008244
Al
3,40
RS-950100008251
PP/St
4,90
PP
3,00
St
9,80
St
8,90
SS/St
9,80
SS
9,80
RS-960100008420
SS
8,90
RS-950100008711
St
9,30
RS-960100008710
St
9,20
SS/St
9,30
SS
9,30
SS
9,20
St
13,60
St
13,70
ASA 150
3
RS-950080008721
RS-950080008722
DN 100
PN 10/16
RS-950100008231
RS-950100008233
2
fixed flange
St
RS-950075008422
swivel flange
pic.
SS/St
RS-950075008421
material
RS-950100008255
RS-950100008411
RS-960100008410
RS-950100008421
RS-950100008422
RS-950100008721
RS-950100008722
100 x 8
(4)
DN 100
PN25/40
ASA 150
4
RS-960100008720
RS-950100008811
RS-960100008810
ASA 300
4
401

picture
code
DN
[mm]
flange
11,00
10,40
SS/St
11,00
SS
11,00
SS
10,40
St
13,30
St
13,10
St
11,60
St
12,70
SS/St
11,60
DN 125
PN 10/16
RS-950125010411
RS-960125010410
RS-950125010711
125 x 10
(5)
RS-960125010710
DN 125
PN 25/40
ASA 150
5
RS-950125010721
RS-950125010722
SS
11,60
RS-960125010720
SS
12,70
RS-950125010811
St
17,60
St
18,60
RS-950150010211
St
16,50
RS-960150010210
St
16,00
RS-950150010221
SS/St
16,50
RS-950150010222
SS
16,50
SS
16,00
Ms/St
19,20
RS-950150010233
Ms
19,60
RS-950150010241
Al/St
12,00
Al
8,70
St
19,00
St
19,70
RS-950150010711
St
19,30
RS-960150010710
St
19,10
SS/St
19,30
SS
19,30
SS
19,10
St
25,50
St
27,20
St
26,90
ASA 300
5
RS-960125010810
DN 150
PN 10/116
RS-960150010220
RS-950150010231
RS-950150010244
RS-950150010411
150 x 10
(6)
RS-960150010410
DN 150
PN 25/40
ASA 150
6
RS-950150010721
RS-950150010722
RS-960150010720
RS-950150010811
ASA 300
6
RS-960150010810
RS-950200012111
RS-960200012110
St
25,70
SS/St
26,90
SS
26,90
RS-960200012120
SS
25,70
RS-950200012211
DN 200
PN 16
St
25,70
St
25,40
DN 200
PN 25
St
29,40
St
31,40
St
29,20
DN 200
PN 10
RS-950200012121
RS-950200012122
fixed flange
RS-960200012210
RS-950200012311
RS-960200012310
200 x 12
(8)
RS-950200012711
RS-960200012710
RS-950200012721
RS-950200012722
ASA 150
8
RS-960200012720
RS-950200012811
RS-960200012810
402
St
St
RS-960125010220
pic.
RS-950125010211
RS-950125010222
swivel flange
weight
[kg]
RS-960125010210
RS-950125010221
material
ASA 300
8
St
32,10
SS/St
29,20
SS
29,20
SS
32,10
St
40,40
St
44,80

FRS flanges
Material:
St (carbon steel), SS (AISI 316Ti)
Working pressure: 10 bar (from DN 125 to DN 250 - 6 bar)
Flanges designed to be mounted on hoses with band clamps (see chapter INDUSTRIAL FITTINGS - clip, clamps,
ferrules). L* - hose tail length.
picture
RS-910025000211
St
weight
[kg]
1,60
RS-920025000210
St
1,30
SS/St
1,60
SS
1,60
RS-920025000220
SS
1,30
RS-910032000211
St
2,30
RS-920032000210
St
1,90
SS/St
2,20
SS
2,20
RS-920032000220
SS
1,90
RS-910040000211
St
2,70
RS-920040000210
St
2,10
SS/St
2,60
SS
2,60
RS-920040000220
SS
2,10
RS-910050000211
St
3,40
RS-920050000210
St
2,80
SS/St
3,20
SS
3,20
RS-920050000220
SS
2,80
RS-910065000211
St
4,40
RS-920065000210
St
3,60
SS/St
4,10
SS
4,10
RS-920065000220
SS
3,60
RS-910075000211
St
5,60
RS-920075000210
St
4,40
SS/St
5,30
SS
5,30
RS-920075000220
SS
4,40
RS-910080000211
St
5,70
RS-920080000210
St
4,50
SS/St
5,40
SS
5,40
RS-920080000220
SS
4,50
RS-910100000211
St
7,00
RS-920100000210
St
5,70
SS/St
6,30
SS
6,30
SS
5,60
St
8,00
St
7,40
RS-910150000211
St
10,30
RS-920150000210
St
9,70
SS/St
10,30
SS
10,30
code
RS-910025000221
RS-910025000222
swivel
flange
RS-910032000221
RS-910032000222
fixed
flange
RS-910040000221
RS-910040000222
RS-910050000221
RS-910050000222
swivel
flange
RS-910065000221
RS-910065000222
fixed
flange
RS-910075000221
RS-910075000222
RS-910080000221
DN
[mm]
25
(1)
32
(1.1/4)
38/40
(1.1/2)
50
(2)
63/65
(2.1/2)
75
(3)
80
RS-910080000222
swivel
flange
RS-910100000221
RS-910100000222
RS-920125000210
RS-910150000221
RS-910150000222
DN 32
PN 10/16
DN 40
PN 10/16
DN 50
PN 10/16
DN 65
PN 10/16
DN 80
PN 10/16
DN 80
PN 10/16
DN 100
PN 10/16
65
65
65
65
90
90
90
100
125
(5)
150
(6)
DN 125
PN 10/16
DN 150
PN 10/16
125
150
material
pic.
1
RS-920150000220
SS
9,80
RS-910200000111
St
15,80
St
15,30
St
21,00
St
19,50
RS-920200000110
DN 25
PN 10/16
L*
[mm]
RS-920100000220
RS-910125000211
fixed
flange
100
(4)
flange
RS-910250000111
RS-920250000110
200
(8)
DN 200
PN 10
250
(10)
DN 250
PN 10
150
200
403

FGN flanges
Material:
St (carbon steel), SS (AISI 316Ti), Ms (brass), Al (aluminium), PP (polypropylene)
Working pressure: 10 bar
Fixed flange with male thread.
picture
code
RS-900025100211
RS-900025100212
RS-900025100215
RS-900032125211
RS-900032125212
flange
thread
DN 25
PN 10/16
1 BSP
DN 32
PN 10/16
RS-900040150211
RS-900040150212
RS-900040150215
RS-900040200211
1.1/4 BSP
1.1/2 BSP
DN 40
PN 10/16
1.1/2 BSPT
2 BSP
RS-900040200212
1 BSPT
73
SS
1,30
41
PP
0,15
75
St
1,90
75
SS
1,90
pic.
2
77
St
2,15
77
SS
2,15
60
PP
0,27
87
St
2,30
87
SS
2,30
RS-900001300111
58
St
1,85
58
SS
1,90
37
Ms
1,40
RS-900001300114
40
Al
0,54
RS-900050200211
90
St
2,95
RS-900050200212
90
SS
2,95
37
Ms
2,55
37
Al
0,81
60
PP
0,36
RS-900001300113
RS-900050200214
TW 1
DN 50
PN 10/16
RS-900050200215
RS-900065300211
3 BSP
2 BSP
2 BSPT
RS-900065250211
RS-900065250212
DN 65
PN 10/16
RS-900065300212
2.1/2 BSP
3 BSP
90
St
3,60
90
SS
3,60
90
St
3,70
90
SS
3,75
RS-900080300211
95
St
4,35
RS-900080300212
95
SS
4,40
46
Ms
3,80
46
Al
1,20
68
PP
0,54
RS-900080300213
RS-900080300214
DN 80
PN 10/16
RS-900080300215
3 BSP
3 BSPT
RS-900003400111
RS-900003400112
TW 3
4 BSP
58
St
2,30
58
SS
2,10
1
1
RS-900003400114
50
Al
0,81
RS-900100400211
97
St
5,55
RS-900100400212
97
SS
5,35
55
Ms
5,05
55
Al
1,70
97
St
6,45
97
SS
6,90
83
Al
2,05
RS-900100400213
RS-900100400214
RS-900100550251
RS-900100550252
RS-900100550254
404
St
weight
[kg]
1,30
material
RS-900001300112
RS-900050200213
length
[mm]
73
4 BSP
DN 100
PN 10/16
5.1/2
DIN 11

Flat seals for flange connection
Material:
KLINGER SIL 4430, PTFE, EPDM
Working press.: Up to 100 bar - KLINGER SIL 4430
Up to 300 bar - PTFE
Up to 60 bar - EPDM
Working temp.: From -200C up to +400C - KLINGER SIL 4430
From -200C up to +260C - PTFE
From -30C up to +120C - EPDM
- PN flange flat seals made according to PN-EN 1514-1.

- ASA flange flat seals made according to ASME B16.21ANSI.
- Permissible working pressure of a particular seal depends on a type and temperature of the medium. For proper
seal selection contact Sales or Technical Department of TUBES INTERNATIONAL.
- When selecting the seal, check that d2 dimension is suitable for your flange class. Example: DN10 PN40 seal
is suitable for PN10, PN16 and PN25 classes. The code applies to the highest class.
d1
d2
Seal dimensions for PN flanges

DN
10
15
20
25
32
40
50
60
65
80
100
125
150
200
250
300
d1
[mm]
18
22
27
34
43
49
61
72
77
89
115
141
169
220
273
324
PN6
39
44
54
64
76
86
96
106
116
132
152
182
207
262
317
373
PN10
46
51
61
71
82
92
107
117
127
142
162
192
218
273
328
378
d2 [mm]
PN16 PN25
46
46
51
51
61
61
71
71
82
82
92
92
107
107
117
117
127
127
142
142
162
168
192
194
218
224
273
284
329
340
384
400
Seal dimensions for ASA flanges

PN40
46
51
61
71
82
92
107
117
127
142
168
194
224
290
352
417
NPS
DN
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
3.1/2
4
5
6
8
10
12
15
20
25
32
40
50
65
80
100
125
150
200
250
300
d1
[mm]
21
27
33
42
49
60
73
89
102
114
141
168
219
273
324
d2 [mm]
ASA 150 ASA 300 ASA 400 ASA 600
48
54
54
54
57
67
67
67
67
73
73
73
76
83
83
83
86
95
95
95
105
111
111
111
124
130
130
130
137
149
149
149
162
165
162
162
175
181
178
194
197
216
213
241
222
251
248
267
279
308
305
321
340
362
359
400
410
422
419
457
The structure of a flange seal code
TK - UK - IBC - PN06 - 010

application
flange seal
seal type
IBC
FF
TG
SR
- inside bolt circle

- flat face
- tongue and groove
- spigot and recess
flange class
size
PN6
PN10
PN16
PN25
PN40
DN 10 DN 300
ASA 150
ASA 300
DN 15 DN 300
material
T
E
4430
- PTFE
- EPDM
- KLINGER SIL 4430
3
thickness [mm]
standard: 3
options: 0,25;
0,4; 0,5; 0,8; 1;
1,5; 2; 4; 5; 6,4
405

Reloading couplings - application in transport
Reloading couplings are designed for loading and unloading of various transport containers (intermediate bulk
containers, tank trucks, rail tankers, tankers). Flexible hose assemblies or rigid loading arms equipped with couplings
are used to load or unload products. The flexible hose assembly used for reloading is a part of transport container
equipment (e.g. tank truck) or loading terminal, then it is a part of the device for filling and empting. Reloading hose
assemblies and loading installations are under strict control of appropriate authorities (in Poland - Transportation
Technical Supervision).
Unloading a rail tanker with the use of:

vapour
product
vapour
vapour tightness
dry disconnect couplings
flexible hose assemblies
breakaway couplings
sight glass
valves
dry disconnect
couplings
breakaway
couplings
vapour pipeline
sight glass
product
valves
product pipeline
pomp
Vapour tightness - ensuring that none of the vapour forced

out from the tank by the incoming product escapes into
the atmosphere. Vapour tightness is obtained by installing
vapour recovery hose assemblies that transfer the vapours
between the containers (vapour balancing) or they are
taken in by absorbers and then burned.
coupling function
couplings
dry disconnect
breakaway
406
coupling types
flange
threaded rail
IBC
Camlock
TW (tankwagen)
Storz, Guillemin
lever (Perrot, Laux, Bauer)
swivel
API
dry disconnect
INDUSTRIAL
MARINE
storage
tank
application
IBC
tank trucks
n
rail tanker
tank ships
n
n
n
n
n
n
n
n

Dry disconnect coupling - operation and types
Dry disconnect couplings are designed for fast connection and disconnection of a hose assembly and installation
with minimum or no product spillage.
Advantages:
- protects the operator, production plant and environment against a hazardous product,
- protects the product in installation against contamination,
- protects against the loss of expensive product.
storage container
installation
tank truck installation

reloading hose assembly
spilled product
storage container
installation
tank truck installation

reloading hose assembly
no product spillage
after disconnection
Types of available dry disconnect couplings

technical data
coupling
type
standard
API
API RP 1004
PN-EN 13083
DDC
STANAG 3756
DGC
DAC
picture
principle of
operation
piston
valve-based
STANAG 3105
ISO 45
DRY-DIS
TR
producers
DRY-LINK
producers
EPSILON
producers
butterfly
valve-based
max. working
pressure
[bar]
size
[inch]
spillage
[ml]
mat.
main application
10
do 5
Al
fuel - tank trucks
25
3/4 8
0,5 2,2
25
14
0,2 1,6
Al
Ms
SS
SS
10
2.1/2
1,1
Al
producers
for gases (LPG)

aviation fuel
reloading, industrial
installations
(hazardous chemical
industry)
25
14
0,2 0,6
14,3
14
SS
industrial installations
(chemical, food,
pharmaceutical industry)
30
13
0,7 2
SS
installations
(chemical industry)
1.1/2
2
PP
12
12
SS
ball
valve-based
DRY-MATE
Ms
typical reloading standard

(fuel, chemical industry)
SS
installations
(light chemical industry)
407

Dry disconnect couplings - API
Material
Seals:
Aluminium
BaylastTM - resistant to fuel, including biodiesel
(options: Viton or PTFE)
Connections:
4 TTMA flange
Operation:
There are two types of API couplings: for liquid phase products (fuel) and gaseous phase (vapour). API couplings
for liquid-phase are manufactured only in one size, 4 API. Since API are dry disconnect couplings, the coupler
(hose unit) and the adaptor (tank unit) are equipped with valves which open when the coupler lever is turned.
However it cannot be turned unless the coupler is properly connected to the adaptor. If it is necessary, the valve of
the adaptor on the tank can be opened separately, without connecting with the coupler. API vapour couplings are
usually of CAMLOCK 4 type consisting of a valve in the adaptor (tank unit), which opens with a pilot - a probe inside
of the CAMLOCK coupler. Along with the API range, gravity drop couplings and delivery elbows are also available.
Application:
API couplings are designed for bottom loading and unloading of fuel tank trucks. They usually make a part of
bottom loading arms at storage terminals. The bottom loading method is widely used in petrochemical industry as
its cost-effectiveness, safety and loading speed rate outperforms a top loading method. A bottom loading island
is much cheaper to build than a top loading rack. A person operating the loading arm remains on the ground
which is the safety advantage of the method. The bottom loading reduces the build-up of electrostatic charge and
vapours. Tanks can be filled much faster (whole process is on the ground level) and a number of compartments
can be loaded at the same time. All benefits of the method make it increasingly popular.
Standards:
API couplings (liquid phase adaptor and gaseous phase adaptor) are designed and manufactured in compliance with
API RP-1004 (American Petroleum Institute). There are two counterparts of this standard: EN 13083 that applies to
the coupling adaptor for bottom loading and unloading and EN 13081 that applies to both adaptor and coupler for
vapour recovery. These couplings are compatible with the couplings of other brands compliant with the standards.
Connecting API coupling - a coupler (hose unit) with an adaptor (tank unit).
The valve of the adaptor for bottom unloading can be opened with a lever - separately,
without connecting with the coupler.
408

Dry disconnect couplings - API
Each bottom reloading system can be divided into two parts:
- for liquid phase (fuel),
- for gaseous phase (vapour).
Liquid phase (fuel)
Designed to transfer fuel. There is API coupling on a tank truck (tank unit - adaptor) which connects with API
coupling of a hose (hose unit - coupler). It works as a dry disconnect coupling and is usually used when there is
a loading arm at the terminal.
A hose with a standard CAMLOCK (dry disconnect) coupling can also be connected to a tank truck. It is required
to assemble a gravity drop coupling on API tank truck coupling. However the application of such couplings does
not make a dry disconnect coupling connection.
picture
connection
code
working
weight
pressure
[kg]
[bar]
DX-API-5300
DX-API-5300B
4 TTMA
flange
4 API
10
9,00
Viton-B
Coupler (hose unit) for bottom loading and unloading

without sight glass.
Viton-GFLT
DX-API-5204
4 TTMA
flange
4 API
4,00
Baylast
Adaptor (tank unit) with sight

glass for bottom loading and
unloading (with the use of lever the valve can be opened
without connection to socket).
DX-API-5204NG
4 TTMA
flange
4 API
4,00
Baylast
Adaptor (tank unit) for bottom loading and unloading

DX-API-5204TNG
4 TTMA
flange
4 API
4,00
PTFE
Adaptor (tank unit) for bottom loading and unloading

DX-API-5204L
4 TTMA
flange
4 API
3,60
Baylast
Adaptor (tank unit) for bottom loading with sight glass.

DX-API-5204LNG
4 TTMA
flange
4 API
3,60
Baylast
Adaptor (tank unit) for bottom loading without sight

glass.
DX-API-5000-24
4 API
1,10
O-ring
Baylast
Blank cap 5204.

DX-API-5000-25
4 API
0,30
flat seal
Baylast.
Blank cap 5204.

Material: Nylon.
characteristics
Baylast
DX-API-5300G
seal
409

Vapour recovery couplings - API
Gaseous phase (vapour)
Designed to transfer vapour (vapour tightness). A hose with a special vapour coupling (with a pilot which opens a
valve) is connected to an adaptor with a vapour valve on a tank truck.
picture
connection
code
weight
[kg]
material
seal
characteristics
Al
Viton
Vapour valve with drain plug

and two sight glasses.
DX-API-VR4000
4 TTMA
flange
4
CAMLOCK
2,40
DX-API-4050AL
4
CAMLOCK
0,70
Vapour valve blank.

Al
DX-API-4050ALC
4
CAMLOCK
0,80
Vapour
chain.
DX-API-4050PL
4
CAMLOCK
0,30
Vapour valve blank.
DX-API-4050PLC
4
CAMLOCK
0,40
ZP-VR-ZPO300-A
3 BSP
female
3
CAMLOCK
Nylon
410
1
ZP-VR-ZPO400-A
4 BSP
female
4
CAMLOCK
ZP-VR-CVR300-A
3
CAMLOCK
DN 100
Al
ZP-VR-CVR400-A
4
CAMLOCK
DN 75
DX-API-VR4030CS-AL
4
CAMLOCK
DN 75
1,60
DX-API-VR4030CS-NP
4
CAMLOCK
DN 75
1,50
DX-API-VRC3000AL
3
CAMLOCK
DN 75
1,20
ZP-VR-DVR300-A
3
CAMLOCK
3 BSP
female
ZP-VR-DVR400-A
4
CAMLOCK
4 BSP
female
valve
blank
with
NBR
Vapour
chain.
Al
NBR
valve
blank
with
NBR
Vapours recovery coupling

ZPO (CAMLOCK A with female thread) with valve.
NBR

CVR with pilot and without
valve (CAMLOCK C with
hose tail). Version with valve
available.
Viton

with pilot and valve.
with pilot.
Al
NBR

with pilot.
Al
-
NBR

DVR with pilot and without
valve. (CAMLOCK D with
female thread).

Gravity drop couplings (adaptors to API couplings)
Gravity drop couplings are designed for gravity unloading. They allow for connection of API tank truck coupling
with a regular reloading coupling e.g. CAMLOCK type.
picture
connection
code
1
weight
[kg]
material
DX-API-4500
4 API
flange
4 TTMA
1,30
DX-API-4502
4 TTMA
flange
DX-API-4502V
3
CAMLOCK
DX-API-4503V
1,60
4 TTMA
flange
4
CAMLOCK
Al
Baylast
4 TTMA
flange
4
CAMLOCK
2,10
Al
Viton
3
CAMLOCK
DX-API-4530
DX-API-4540
4 API
DX-API-4540V
DX-API-4530SG
DX-API-4530SGV
DX-API-4540SG
DX-API-4540SGV
Viton
1,60
DX-API-4504V
Baylast
Baylast
DX-API-4504
Viton
4
CAMLOCK
3
CAMLOCK
4 API
4
CAMLOCK
Gravity drop coupling to be

mounted with adaptor (DXAPI-4500), angle 22.5, with
sight glass, CAMLOCK A.
Viton
1,90
DX-API-4503
SPECIAL
Ring connecting 4 API couplings with gravity drop couplings.

Assembly bolts included in
gravity drop coupling set.
Baylast
1,50
Al
4
CAMLOCK
DX-API-4503
Baylast
Viton
DX-API-4501
characteristics
Al
DX-API-4500V
DX-API-4501V
seal

mounted with adaptor (DXAPI-4500), straight, with
sight glass.
* - without sight glass

mounted with adaptor, angle 22.5, with sight glass,
CAMLOCK D.
1,30
Baylast
Al
1,40
One-piece gravity drop coupling, angle 22.5, without

sight glass, CAMLOCK A.
Viton
-
Baylast
Al
Viton
Baylast
One-piece gravity drop coupling, angle 22.5, with sight

glass, CAMLOCK A.
Viton
411

Dry disconnect couplings - DDC
Material:
Aluminium, brass, AISI 316, titanium, PEEK,

PVDF/Hastelloy, Hastelloy, Duplex
Seals:
O-ring: FPM (Viton), EPDM, Chemraz,
Kalrez, NBR
Flat seal: PTFE, FPM/FKM (Viton), PUR,
Thermpac (HBD)
Other materials on request
Connections:
BSP, NPT thread
ANSI 150, 300, PN EN 1092-1 flange
The acceptable working temperature ranges from -54C up to
+250C, but as it depends on the medium, confirm the working
temperature of each application with Technical Department of
Operation
A hose unit (coupler) and a tank unit (adaptor) of DDC type (Dry Disconnect Coupling) are both equipped with piston
valves which can be opened only after the coupling is connected and closed before it is disconnected. It prevents
spillage. The head of the hose unit is rotary (360). To allow fluid flow, both units must be coupled by rotating the
head of the hose unit about 100 clockwise. To stop the fluid flow, turn the head of the hose unit anticlockwise so the
valves close and the coupling disconnects. A coded version of the coupling is also available. It prevents connecting
the hose unit to the wrong tank unit, conveying other fluid. They are coded using slots of special dimension on the
hose unit which mate only with pins on the corresponding tank unit.
Application
DDC couplings are widely used in road, rail, water and air transport, in petrochemical, chemical and pharmaceutical
industry. They meet all requirements for safe, reliable and environment friendly transfer of hazardous, toxic or
valuable products. Interchangeable with AVERY HARDOLL, TODO-MATIC, FULCRUM couplings.
Standards
Manufactured according to NATO STANAG 3756 (DDC 2, 2.1/2, 3 and 4) and ATOFINA SGM 2049.TUY.C.(DDC
2, 3). Meet the requirements of ATEX, TDT, ADR, RID, IMDG, Pressure Equipment Directive 97/23/WE. Approved
by the European Chemical Industry Council - CEFIC.
Flow rate, maximum spillage at disconnection
size [inch]
DN [mm]
25
50
tank unit diameter [mm]
56
70
max. flow rate [l/min]
200
900
max. spillage [ml]
0,5
0,5
2.1/2
65
80
100
150
200
105
119
164
238
272
1500
2000
3500
6000
8000
1,1
1,33
2,2
Pressure drop vs. flow rate
pressure drop [bar]
DN 20/25
50 / 56
DN 50
70
DN 65
105
DN 80
119
DN 100
164
flow rate [l/min]
412
Test parameters:
DN 150
238
(calculated)
Medium: n-paraffin
Temperature: +20C
Density: 0,75 kg/dm3
Viscosity: 1,75 mm2/s

Tank unit- size 1 ( 56)
picture
Tank unit with female thread
Tank unit with male thread
Tank unit with flange
Tank unit blank cap
code
MK-DDC-T101A1101B
MK-DDC-T103A1101B
MK-DDC-T105A1101B
MK-DDC-T101A2201B
MK-DDC-T103A2201B
MK-DDC-T105A2201B
MK-DDC-T101A4401A
MK-DDC-T103A4401A
MK-DDC-T105A4401A
MK-DDC-T101A7701A
MK-DDC-T103A7701A
MK-DDC-T105A7701A
MK-DDC-T101A9901A
MK-DDC-T103A9901A
MK-DDC-T105A9901A
connection
3/4 BSP
1 BSP
1.1/4 BSP
3/4 BSP
1 BSP
1.1/4 BSP
3/4 BSP
1 BSP
1.1/4 BSP
3/4 BSP
1 BSP
1.1/4 BSP
3/4 BSP
1 BSP
1.1/4 BSP
MK-DDC-T169A1101
3/4 BSP
MK-DDC-T171A1101
1 BSP
MK-DDC-T169A2201
3/4 BSP
MK-DDC-T171A2201
1 BSP
MK-DDC-T169A4401
3/4 BSP
MK-DDC-T171A4401
1 BSP
MK-DDC-T123A1101
MK-DDC-T124A1101
MK-DDC-T151A1101
MK-DDC-T152A1101
MK-DDC-T123A2201
MK-DDC-T124A2201
MK-DDC-T151A2201
MK-DDC-T152A2201
MK-DDC-T123A4401
MK-DDC-T124A4401
MK-DDC-T151A4401
MK-DDC-T152A4401
MK-DDC-T123A7701
MK-DDC-T124A7701
MK-DDC-T151A7701
MK-DDC-T152A7701
MK-DDC-T123A9901
MK-DDC-T124A9901
MK-DDC-T151A9901
MK-DDC-T152A9901
DN25 PN10/16
DN25 PN25/40
1 ASA 150
1 ASA 300
DN25 PN10/16
DN25 PN25/40
1 ASA 150
1 ASA 300
DN25 PN10/16
DN25 PN25/40
1 ASA 150
1 ASA 300
DN25 PN10/16
DN25 PN25/40
1 ASA 150
1 ASA 300
DN25 PN10/16
DN25 PN25/40
1 ASA 150
1 ASA 300
work. press.
[bar]
Repair kit
flat seal
Set of spare parts
MK-DDC-O-T1-01
MK-1498-09
MK-1498-06
MK-1220-09
MK-1220-06
MK-1536-09
MK-1536-06
MK-DDC-S-T1-11
MK-DDC-S-T1-22
MK-DDC-S-T1-44
0,30
16
PUR
brass
AISI 316
25
0,70
FPM/
FKM
PTFE
Hastelloy
PEEK
0,10
brass
25
FPM/
FKM
aluminium
1,10
brass
1,60
16
AISI 316
FPM/
FKM
1.1/4 BSP
-
1,50
25
3/4 BSP
1 BSP
AISI 316
Hastelloy
1,70
PEEK
0,20
composite
0,13
aluminium
FPM/
FKM
AISI 316
-
0,80
aluminium
16
MK-DDC-C100A4401
Repair kit
set of O-rings
seal
weight
O-ring thread [kg]
aluminium
MK-DDC-C100A2201
MK-DDC-C100A1101
material
16
25
FPM/FKM
PUR
PTFE
PUR
PTFE
PUR
PTFE
aluminium
brass
AISI 316
0,22
0,59
0,001
0,002
0,001
0,003
-
413

Hose unit - size 1 ( 56)
picture
Hose unit with female thread
Hose unit with flange
Hose unit blank plug
code
MK-DDC-S101A1101B
MK-DDC-S103A1101B
MK-DDC-S105A1101B
MK-DDC-S101A2201B
MK-DDC-S103A2201B
MK-DDC-S105A2201B
MK-DDC-S101A4401A
MK-DDC-S103A4401A
MK-DDC-S105A4401A
MK-DDC-S101A7701A
MK-DDC-S103A7701A
MK-DDC-S105A7701A
MK-DDC-S101A9901A
MK-DDC-S103A9901A
MK-DDC-S105A9901A
MK-DDC-S123A1101
MK-DDC-S124A1101
MK-DDC-S151A1101
MK-DDC-S152A1101
MK-DDC-S123A2201
MK-DDC-S124A2201
MK-DDC-S151A2201
MK-DDC-S152A2201
MK-DDC-S123A4401
MK-DDC-S124A4401
MK-DDC-S151A4401
MK-DDC-S152A4401
MK-DDC-S123A7701
MK-DDC-S124A7701
MK-DDC-S151A7701
MK-DDC-S152A7701
MK-DDC-S123A9901
MK-DDC-S124A9901
MK-DDC-S151A9901
MK-DDC-S152A9901
connection
3/4 BSP
1 BSP
1.1/4 BSP
3/4 BSP
1 BSP
1.1/4 BSP
3/4 BSP
1 BSP
1.1/4 BSP
3/4 BSP
1 BSP
1.1/4 BSP
3/4 BSP
1 BSP
1.1/4 BSP
DN25 PN10/16
DN25 PN25/40
1 ASA 150
1 ASA 300
DN25 PN10/16
DN25 PN25/40
1 ASA 150
1 ASA 300
DN25 PN10/16
DN25 PN25/40
1 ASA 150
1 ASA 300
DN25 PN10/16
DN25 PN25/40
1 ASA 150
1 ASA 300
DN25 PN10/16
DN25 PN25/40
1 ASA 150
1 ASA 300
work. press.
[bar]
Repair kit
flat seal
Set of spare parts
414
MK-DDC-O-S1-01
MK-1498-09
MK-1498-06
MK-1220-09
MK-1220-06
MK-1536-09
MK-1536-06
MK-DDC-S-S1-11
MK-DDC-S-S1-22
MK-DDC-S-S1-44
0,50
16
PUR
brass
AISI 316
25
1,40
FPM/
FKM
1,30
PTFE
Hastelloy
PEEK
0,30
aluminium
1,10
brass
1,60
AISI 316
FPM/
FKM
3/4 BSP
1 BSP
1.1/4 BSP
-
2,20
25
Hastelloy
2,50
PEEK
0,50
composite
0,06
aluminium
FPM/
FKM
AISI 316
-
1,50
16
MK-DDC-P100A4401
Repair kit
flat seal
seal
weight
O-ring thread [kg]
aluminium
MK-DDC-P100A2201
MK-DDC-P100A1101
material
16
25
FPM/FKM
PUR
PTFE
PUR
PTFE
PUR
PTFE
aluminium
brass
AISI 316
0,12
0,32
0,001
0,002
0,001
0,003
-

Tank unit - size 2 ( 70)
picture
code
connection
MK-DDC-T207A1101B
MK-DDC-T210A1101B
MK-DDC-T207A2201B
MK-DDC-T210A2201B
MK-DDC-T207A4401A
MK-DDC-T210A4401A
MK-DDC-T207A7701A
MK-DDC-T210A7701A
MK-DDC-T207A9901A
MK-DDC-T210A9901A
1.1/2 BSP
2 BSP
1.1/2 BSP
2 BSP
1.1/2 BSP
2 BSP
1.1/2 BSP
2 BSP
1.1/2 BSP
2 BSP
MK-DDC-T278A1101
2 BSP
MK-DDC-T278A2201
2 BSP
MK-DDC-T278A4401
2 BSP
MK-DDC-T227B1101
MK-DDC-T230B1101
MK-DDC-T255B1101
MK-DDC-T257B1101
MK-DDC-T227B2201
MK-DDC-T228B2201
MK-DDC-T255B2201
MK-DDC-T256B2201
MK-DDC-T230B2201
MK-DDC-T231B2201
MK-DDC-T257B2201
MK-DDC-T258B2201
MK-DDC-T227B4401
MK-DDC-T228B4401
MK-DDC-T255B4401
MK-DDC-T256B4401
MK-DDC-T230B4401
MK-DDC-T231B4401
MK-DDC-T257B4401
MK-DDC-T258B4401
MK-DDC-T227A7701
MK-DDC-T228A7701
MK-DDC-T255A7701
MK-DDC-T256A7701
MK-DDC-T230A7701
MK-DDC-T231A7701
MK-DDC-T257A7701
MK-DDC-T258A7701
MK-DDC-T227A9901
MK-DDC-T255A9901
MK-DDC-T230A9901
MK-DDC-T257A9901
DN40 PN10/16
DN50 PN10/16
1.1/2 ASA 150
2 ASA 150
DN40 PN10/16
DN40 PN25/40
1.1/2 ASA 150
1.1/2 ASA 300
DN50 PN10/16
DN50 PN25/40
2 ASA 150
2 ASA 300
DN40 PN10/16
DN40 PN25/40
1.1/2 ASA 150
1.1/2 ASA 300
DN50 PN10/16
DN50 PN25/40
2 ASA 150
2 ASA 300
DN40 PN10/16
DN40 PN25/40
1.1/2 ASA 150
1.1/2 ASA 300
DN50 PN10/16
DN50 PN25/40
2 ASA 150
2 ASA 300
DN40 PN10/16
1.1/2 ASA 150
DN50 PN10/16
2 ASA 150
work. press.
[bar]
16
25
6
material
aluminium
PUR
brass
AISI 316
FPM/
FKM
PTFE
Hastelloy
PEEK
aluminium
16
seal
weight
O-ring thread [kg]
brass
25
FPM/
FKM
FPM/
FKM
AISI 316
aluminium
16
brass
AISI 316
25
Hastelloy
PEEK
415

picture
Tank unit blank cap
code
connection
work. press.
[bar]
MK-DDC-C200E2202
MK-DDC-C200A1101
MK-DDC-C200B4401
MK-DDC-C200D1300
Repair kit
set of O-rings
MK-DDC-O-T2-01
Repair kit
flat seal
Set of spare parts
MK-1196-09
MK-1196-06
MK-1052-09
MK-1052-06
MK-DDC-S-T2-11
MK-DDC-S-T2-22
MK-DDC-S-T2-44
1.1/2 BSP
2 BSP
-
16
25
material
seal
weight
O-ring thread [kg]
composite
NBR
aluminium
AISI 316
FPM/
FKM
NBR/PVC
FPM/FKM
PUR
PTFE
PUR
PTFE
aluminium
brass
AISI 316
0,002
0,003
0,004

picture
Hose unit with male thread
code
connection
MK-DDC-S207A1101B
MK-DDC-S210A1101B
MK-DDC-S207A2201B
MK-DDC-S210A2201B
MK-DDC-S207A4401A
MK-DDC-S210A4401A
MK-DDC-S207A7701A
MK-DDC-S210A7701A
MK-DDC-S207A9901A
MK-DDC-S210A9901A
1.1/2 BSP
2 BSP
1.1/2 BSP
2 BSP
1.1/2 BSP
2 BSP
1.1/2 BSP
2 BSP
1.1/2 BSP
2 BSP
MK-DDC-S278A1101
work. press.
[bar]
16
25
6
2 BSP
material
aluminium
416
2 BSP
MK-DDC-S278A4401
2 BSP
MK-DDC-S227A1101
MK-DDC-S230A1101
MK-DDC-S255A1101
MK-DDC-S256A1101
MK-DDC-S227A2201
MK-DDC-S228A2201
MK-DDC-S255A2201
MK-DDC-S256A2201
MK-DDC-S230A2201
MK-DDC-S231A2201
MK-DDC-S257A2201
MK-DDC-S258A2201
MK-DDC-S227A4401
MK-DDC-S228A4401
MK-DDC-S255A4401
MK-DDC-S256A4401
MK-DDC-S230A4401
MK-DDC-S231A4401
MK-DDC-S257A4401
MK-DDC-S258A4401
DN40 PN10/16
DN50 PN10/16
1.1/2 ASA 150
1.1/2 ASA 300
DN40 PN10/16
DN40 PN25/40
1.1/2 ASA 150
1.1/2 ASA 300
DN50 PN10/16
DN50 PN25/40
2 ASA 150
2 ASA 300
DN40 PN10/16
DN40 PN25/40
1.1/2 ASA 150
1.1/2 ASA 300
DN50 PN10/16
DN50 PN25/40
2 ASA 150
2 ASA 300
PUR
brass
AISI 316
FPM/
FKM
PTFE
Hastelloy
PEEK
aluminium
16
MK-DDC-S278A2201
seal
weight
O-ring thread [kg]
brass
25
FPM/
FKM
FPM/
FKM
AISI 316
aluminium
16
bronze
25
AISI 316

picture
code
MK-DDC-S227A7701
MK-DDC-S228A7701
MK-DDC-S255A7701
MK-DDC-S256A7701
MK-DDC-S230A7701
MK-DDC-S231A7701
MK-DDC-S257A7701
MK-DDC-S258A7701
MK-DDC-S227A9901
MK-DDC-S255A9901
MK-DDC-S230A9901
MK-DDC-S257A9901
connection
DN40 PN10/16
DN40 PN25/40
1.1/2 ASA 150
1.1/2 ASA 300
DN50 PN10/16
DN50 PN25/40
2 ASA 150
2 ASA 300
DN40 PN10/16
1.1/2 ASA 150
DN50 PN10/16
2 ASA 150
work. press.
[bar]
material
25
Hastelloy
MK-DDC-P200A2201
MK-DDC-P200A1101
MK-DDC-O-S2-01
Repair kit
flat seal
Set of spare parts
MK-1196-09
MK-1196-06
MK-1052-09
MK-1052-06
MK-DDC-S-S2-11
MK-DDC-S-S2-22
MK-DDC-S-S2-44
FPM/
FKM
FPM
PEEK
composite
-
MK-DDC-P200A4401
Repair kit
set of O-rings
seal
weight
O-ring thread [kg]
aluminium
AISI 316
1.1/2 BSP
2 BSP
16
25
FPM/FKM
PUR
PTFE
PUR
PTFE
aluminium
bronze
AISI 316
0,002
-
0,003
0,004
Tank unit - size 2.1/2 ( 105)

picture
code
connection
MK-DDC-T312D1101B
MK-DDC-T314D1101B
MK-DDC-T312D2201B
MK-DDC-T314D2201B
MK-DDC-T312B4401A
MK-DDC-T314B4401A
MK-DDC-T312A7701A
MK-DDC-T314A7701A
MK-DDC-T312A9901A
MK-DDC-T314A9901A
2.1/2 BSP
3 BSP
2.1/2 BSP
3 BSP
2.1/2 BSP
3 BSP
2.1/2 BSP
3 BSP
2.1/2 BSP
3 BSP
MK-DDC-T380A1101
2.1/2 BSP
MK-DDC-T382A1101
3 BSP
MK-DDC-T380A2201
2.1/2 BSP
MK-DDC-T382A2201
3 BSP
MK-DDC-T380A4401
2.1/2 BSP
MK-DDC-T382A4401
3 BSP
MK-DDC-T333D1101
MK-DDC-T336D1101
MK-DDC-T359D1101
MK-DDC-T361D1101
MK-DDC-T333D2201
MK-DDC-T334D2201
MK-DDC-T336D2201
MK-DDC-T337D2201
MK-DDC-T359D2201
DN65 PN10/16
DN80 PN10/16
2.1/2 ASA 150
3 ASA 150
DN65 PN10/16
DN65 PN25/40
DN80 PN10/16
DN80 PN25/40
2.1/2 ASA 150
work. press.
[bar]
material
10
aluminium
16
bronze
25
AISI 316
PUR
FPM/
FKM
PEEK
10
aluminium
16
brass
25
AISI 316
10
aluminium
PTFE
Hastelloy
16
seal
weight
O-ring thread [kg]
FPM/
FKM
FPM/
FKM
bronze
417

Tank unit - size 2.1/2 ( 105)
picture
Tank unit blank cap
code
MK-DDC-T360D2201
MK-DDC-T361D2201
MK-DDC-T362D2201
MK-DDC-T367D2201
MK-DDC-T368D2201
MK-DDC-T333B4401
MK-DDC-T334B4401
MK-DDC-T336B4401
MK-DDC-T337B4401
MK-DDC-T359B4401
MK-DDC-T360B4401
MK-DDC-T361B4401
MK-DDC-T362B4401
MK-DDC-T367B4401
MK-DDC-T368B4401
connection
2.1/2 ASA 300
3 ASA 150
3 ASA 300
TTMA 3
TTMA 4
DN65 PN10/16
DN65 PN25/40
DN80 PN10/16
DN80 PN25/40
2.1/2 ASA 150
2.1/2 ASA 300
3 ASA 150
3 ASA 300
TTMA 3
TTMA 4
work. press.
[bar]
material
16
bronze
FPM/
FKM
25
MK-DDC-C300E2202
MK-DDC-C300A1101
MK-DDC-C300B4401
Repair kit
set of O-rings
MK-DDC-O-T3-01
Repair kit
flat seal
Set of spare parts
MK-1181-09
MK-1181-06
MK-1110-09
MK-1110-06
MK-DDC-S-T3-11
MK-DDC-S-T3-22
MK-DDC-S-T3-44
aluminium
AISI 316
2.1/2 BSP
3 BSP
AISI 316
composite
-
seal
weight
O-ring thread [kg]
FPM/FKM
PUR
PTFE
PUR
PTFE
aluminium
bronze
AISI 316
10
16
25
code
connection
work. press.
[bar]
material
MK-DDC-S312B1101B
MK-DDC-S314B1101B
MK-DDC-S312B2201B
MK-DDC-S314B2201B
MK-DDC-S312B4401A
MK-DDC-S314B4401A
MK-DDC-S312A7701A
MK-DDC-S314A7701A
MK-DDC-S312A9901A
MK-DDC-S314A9901A
2.1/2 BSP
3 BSP
2.1/2 BSP
3 BSP
2.1/2 BSP
3 BSP
2.1/2 BSP
3 BSP
2.1/2 BSP
3 BSP
10
aluminium
16
bronze
NBR
FPM
0,005
-
0,006
0,007
Hose unit - size 2.1/2 ( 105)

picture
25
6
MK-DDC-P300A2201
MK-DDC-P300A1101
Repair kit
flat seal
Set of spare parts
418
MK-DDC-O-S3-01
MK-1181-09
MK-1181-06
MK-1110-09
MK-1110-06
MK-DDC-S-S3-11
MK-DDC-S-S3-22
MK-DDC-S-S3-44
2.1/2 BSP
3 BSP
-
10
16
25
FPM/
FKM
PTFE
PEEK
aluminium
AISI 316
PUR
Hastelloy
composite
MK-DDC-P300A4401
Repair kit
set of O-rings
AISI 316
seal
weight
O-ring thread [kg]
FPM/FKM
PUR
PTFE
PUR
PTFE
aluminium
bronze
AISI 316
NBR
FPM
0,005
0,006
0,007

picture
Tank unit blank cap
code
connection
work. press.
[bar]
material
MK-DDC-T414D1101B
3 BSP
10
aluminium
MK-DDC-T414D2201B
3BSP
16
bronze
MK-DDC-T414B4401A
3BSP
MK-DDC-T414A7701A
3 BSP
MK-DDC-T414A8701A
3BSP
MK-DDC-T414A9901A
3 BSP
MK-DDC-T433D1101
MK-DDC-T436D1101
MK-DDC-T461D1101
MK-DDC-T467D1101
MK-DDC-T468D1101
MK-DDC-T433D2201
MK-DDC-T434D2201
MK-DDC-T436D2201
MK-DDC-T437D2201
MK-DDC-T461D2201
MK-DDC-T462D2201
MK-DDC-T467D2201
MK-DDC-T468D2201
MK-DDC-T433B4401
MK-DDC-T434B4401
MK-DDC-T436B4401
MK-DDC-T437B4401
MK-DDC-T461B4401
MK-DDC-T462B4401
MK-DDC-T467B4401
MK-DDC-T468B4401
MK-DDC-T436A9901
MK-DDC-T461A9901
MK-DDC-T467A9901
MK-DDC-T468A9901
DN65 PN10/16
DN80 PN10/16
3 ASA 150
TTMA 3
TTMA 4
DN65PN10/16
DN65 PN25/40
DN80 PN10/16
DN80 PN25/40
3 ASA 150
3 ASA 300
TTMA 3
TTMA 4
DN65 PN10/16
DN65 PN25/40
DN80 PN10/16
DN80 PN25/40
3 ASA 150
3 ASA 300
TTMA 3
TTMA 4
DN80 PN10/16
3 ASA 150
TTMA 3
TTMA 4
AISI 316
25
PEEK
10
aluminium
16
bronze
MK-DDC-C400B4401
25
AISI 316
PEEK
MK-DDC-C400D1300
Repair kit
set of O-rings
Repair kit
flat seal
Set of spare parts
MK-DDC-O-T4-01
MK-1110-09
MK-1110-06
MK-DDC-S-T4-11
MK-DDC-S-T4-22
MK-DDC-S-T4-44
FPM/
FKM
3 BSP
10
16
25
aluminium
AISI 316
PTFE
FPM/
FKM
composite
-
PUR
PVDF
Hastelloy
MK-DDC-C400E2202
MK-DDC-C400A1101
Hastelloy
seal
weight
O-ring thread [kg]
NBR
FPM
rubber
NBR
FPM/FKM
PUR
PTFE
aluminium
bronze
AISI 316
0,006
0,007
-
419

picture
code
connection
work. press.
[bar]
material
MK-DDC-S414B1101B
3 BSP
10
aluminium
MK-DDC-S414B2201B
3BSP
16
bronze
MK-DDC-S414B4401A
3BSP
MK-DDC-S414A7701A
3 BSP
MK-DDC-S414A8701A
3BSP
MK-DDC-S414A9901A
MK-DDC-S436B1101
MK-DDC-S461B1101
MK-DDC-S467B1101
MK-DDC-S468B1101
MK-DDC-S436B2201
MK-DDC-S437B2201
MK-DDC-S461B2201
MK-DDC-S462B2201
MK-DDC-S467B2201
MK-DDC-S468B2201
MK-DDC-S436B4401
MK-DDC-S437B4401
MK-DDC-S461B4401
MK-DDC-S462B4401
MK-DDC-S467B4401
MK-DDC-S468B4401
MK-DDC-S436A9901
MK-DDC-S461A9901
3 BSP
DN80 PN10/16
3 ASA 150
TTMA 3
TTMA 4
DN 80 PN10/16
DN 80 PN25/40
3 ASA 150
3 ASA 300
TTMA 3
TTMA 4
DN80 PN10/16
DN80 PN25/40
3 ASA 150
3 ASA 300
TTMA 3
TTMA 4
DN80 PN10/16
3 ASA 150
AISI 316
25
6
PEEK
10
aluminium
16
bronze
25
AISI 316
PEEK
MK-DDC-P400A4401
Repair kit
set of O-rings
MK-DDC-O-S4-01
Repair kit
flat seal
Set of spare parts
aluminium
AISI 316
3 BSP
10
16
25
code
connection
work. press.
[bar]
material
MK-DDC-T516A1101B
4 BSP
10
aluminium
MK-DDC-T516D2201B
4 BSP
16
bronze
4 BSP
25
AISI 316
10
aluminium
16
bronze
25
AISI 316
MK-1110-09
MK-1110-06
MK-DDC-S-S4-11
MK-DDC-S-S4-22
MK-DDC-S-S4-44
FPM/
FKM
FPM/
FKM
composite
-
PUR
PVDF/Hast.
MK-DDC-P400A2201
MK-DDC-P400A1101
Hastelloy
seal
weight
O-ring thread [kg]
FPM/FKM
PUR
PTFE
aluminium
bronze
AISI 316
PTFE
0,006
0,007
NBR
FPM

picture
MK-DDC-T516B4401A
420
MK-DDC-T539D1101
MK-DDC-T563D1101
MK-DDC-T568D1101
MK-DDC-T539D2201
MK-DDC-T540D2201
MK-DDC-T563D2201
MK-DDC-T564D2201
MK-DDC-T568D2201
MK-DDC-T539B4401
MK-DDC-T540B4401
MK-DDC-T563B4401
MK-DDC-T564B4401
MK-DDC-T568B4401
DN100 PN10/16
4 ASA 150
TTMA 4
DN100 PN10/16
DN100 PN25/40
4 ASA 150
4 ASA 300
TTMA 4
DN100 PN10/16
DN100 PN25/40
4 ASA 150
4 ASA 300
TTMA 4
seal
weight
O-ring thread [kg]
FPM/
FKM
PUR
PTFE
FPM/
FKM

picture
Tank unit blank cap
code
connection
work. press.
[bar]
MK-DDC-C500E2202
MK-DDC-C500B1101
material
composite
seal
weight
O-ring thread [kg]
NBR
aluminium
FPM
MK-DDC-C500B4401
Repair kit
set of O-rings
MK-DDC-O-T5-01
4 BSP
10
16
25
code
connection
work. press.
[bar]
material
MK-DDC-S516B1101B
4 BSP
10
aluminium
MK-1295-09
Repair kit
flat seal
Set of spare parts
AISI 316
MK-1295-06
MK-DDC-S-T5-11
MK-DDC-S-T5-22
MK-DDC-S-T5-44
FPM/FKM
PUR
PTFE
aluminium
bronze
AISI 316
0,010
0,009
-

picture
seal
weight
O-ring thread [kg]
PUR
MK-DDC-S516B2201B
4 BSP
16
bronze
MK-DDC-S516B4401A
4 BSP
25
AISI 316
10
aluminium
16
bronze
25
AISI 316
MK-DDC-S539B1101
MK-DDC-S563B1101
MK-DDC-S568B1101
MK-DDC-S539B2201
MK-DDC-S540B2201
MK-DDC-S563B2201
MK-DDC-S564B2201
MK-DDC-S568B2201
MK-DDC-S539B4401
MK-DDC-S540B4401
MK-DDC-S563B4401
MK-DDC-S564B4401
MK-DDC-S568B4401
DN100 PN10/16
4 ASA 150
TTMA 4
DN100 PN10/16
DN100 PN25/40
4 ASA 150
4 ASA 300
TTMA 4
DN100 PN10/16
DN100 PN25/40
4 ASA 150
4 ASA 300
TTMA 4
composite
MK-DDC-P500B2201
MK-DDC-P500B1101
MK-DDC-P500B4401
Repair kit
set of O-rings
Repair kit
flat seal
Set of spare parts
MK-DDC-O-S5-01
MK-1295-09
MK-1295-06
MK-DDC-S-S5-11
MK-DDC-S-S5-22
MK-DDC-S-S5-44
aluminium
AISI 316
4 BSP
10
16
25
FPM/FKM
PUR
PTFE
aluminium
bronze
AISI 316
FPM/
FKM
PTFE
FPM/
FKM
NBR
FPM
0,010
0,009
-
421

picture
code
connection
work. press.
[bar]
material
MK-DDC-T6110B1101B
6 BSP
10
aluminium
seal
weight
O-ring thread [kg]
PUR
FPM/
FKM
MK-DDC-T6110B4401A
6 BSP
MK-DDC-T645B1101
DN150PN10/16
MK-DDC-T6100B1101
6 ASA 150
MK-DDC-T645B4401
DN150PN10/16
MK-DDC-T6100B4401
6 ASA 150
MK-DDC-C600A1101
MK-DDC-O-T6-01
16
AISI 316
10
aluminium
PTFE
FPM/
FKM
16
AISI 316
aluminium
FPM
FPM/FKM
0,016
Tank unit blank cap
Repair kit
set of O-rings
Repair kit
flat seal
Set of spare parts
MK-1963-09
MK-1963-06
MK-DDC-S-T6-11
MK-DDC-S-T6-44
PUR
PTFE
aluminium
AISI 316
6 BSP
10
16
code
connection
work. press.
[bar]
material
seal
weight
O-ring thread [kg]
MK-DDC-S6110B1101B
6 BSP
10
aluminium
PUR

picture
FPM/
FKM
MK-DDC-S6110B4401A
6 BSP
MK-DDC-S645B1101
DN150PN10/16
MK-DDC-S6100B1101
6 ASA 150
MK-DDC-S645B4401
DN150PN10/16
MK-DDC-S6100B4401
6 ASA 150
16
AISI 316
10
aluminium
PTFE
FPM/
FKM
16
AISI 316
Repair kit
set of O-rings
Repair kit
flat seal
Set of spare parts
422
MK-DDC-P600A1101
aluminium
FPM
MK-DDC-O-S6-01
FPM/FKM
6 BSP
0,016
10
16
MK-1963-09
MK-1963-06
MK-DDC-S-S6-11
MK-DDC-S-S6-44
PUR
PTFE
aluminium
AISI 316

picture
code
connection
MK-DDC-T8102A1101
DN200PN10
MK-DDC-T8103A1101
DN200PN16
MK-DDC-T8105A1101
8 ASA 150
MK-DDC-T8102A4401
DN200PN10
MK-DDC-T8103A4401
DN200PN16
MK-DDC-T8105A4401
8 ASA 150
MK-DDC-C800A1101
work. press.
[bar]
material
10
aluminium
seal
weight
O-ring thread [kg]
FPM/
FKM
16
AISI 316
aluminium
FPM
MK-DDC-O-T8-01
FPM/FKM
MK-DDC-S-T8-11
MK-DDC-S-T8-44
10
16
aluminium
AISI 316
code
connection
work. press.
[bar]
material
MK-DDC-S8102A1101
DN200PN10
MK-DDC-S8103A1101
DN200PN16
10
aluminium
MK-DDC-S8105A1101
8 ASA 150
MK-DDC-S8102A4401
DN200PN10
MK-DDC-S8103A4401
DN200PN16
MK-DDC-S8105A4401
8 ASA 150
Tank unit blank cap
Repair kit
set of O-rings
Set of spare parts

picture
16
AISI 316
seal
weight
O-ring thread [kg]
FPM/
FKM
Repair kit
set of O-rings
Set of spare parts
MK-DDC-P800A1101
aluminium
FPM
MK-DDC-O-S8-01
FPM/FKM
MK-DDC-S-S8-11
MK-DDC-S-S8-44
10
16
aluminium
AISI 316
423

Dry disconnect couplings - DGC
Material:
AISI 316
(bronze / brass version available)
Seals:
O-ring: FPM (Viton), NBR
Flat seal: PTFE
(other materials on request)
Connections:
BSP, NPT thread; DIN, ASA flanges
(ACME, Whitworth thread available).
The acceptable working temperature ranges from -50C up to
+200C, but as it depends on the medium, confirm the working
temperature of each application with Technical Department of
Operation
A hose unit (coupler) and a tank unit (adaptor) of DGC type (Dry Gas Coupling) are both equipped with piston
spillage. The head of the hose unit is rotary (360). To allow medium flow both units must be coupled by rotating
the head of the hose unit about 100 clockwise. During rotation the coupling locks, the valve of the hose unit slides
towards the tank unit and the medium starts to flow. To stop the flow, turn the head of the hose unit anticlockwise
so the valves close and the coupling disconnects.
Application
Dry disconnect couplings of DGC type (Dry Gas Couplings) are designed for gas transfer, LPG in particular. They
are widely used in road, rail, water and air transport, in petrochemical, chemical and pharmaceutical industry. They
meet all requirements for safe, reliable and environment friendly transfer of hazardous, toxic or valuable fluids.
Standards
Meet the requirements of ATEX, TDT, ADR, RID, IMDG, Pressure Equipment Directive 97/23/EC (PED).
Flow rate, maximum spillage at disconnection
size [inch]
DN [mm]
25
50
80
100
plug diameter [mm]
56
71
119
164
max. spillage [ml]
0,2
0,3
0,7
1,6
pressure drop [bar]
DN 25
56
DN 50
71
Test parameters:
DN 80
119
flow rate [l/min]
424
DN 100
164
Medium: n-paraffin
Temperature: +20C

picture
work. press.
[bar]
connection
MK-DGC-L101A4401A
3/4 BSP
PTFE
MK-DGC-L102A4401
3/4 NPT
0,80
PTFE
0,70
MK-DGC-L103A4401A
1 BSP
MK-DGC-L104A4401
1 NPT
25
material
seal
weight
O-ring thread [kg]
code
AISI 316
FPM/
FKM
0,70
0,80
MK-DGC-L105A4401A
1.1/4 BSP
PTFE
0,70
MK-DGC-L106A4401
1.1/4 NPT
0,80
MK-DGC-L150A4401
3/4 ASA 300
MK-DGC-L124A4401
DN25 PN25/40
MK-DGC-L152A4401
1 ASA 300
MK-DGC-L126A4401
DN32 PN25/40
MK-DGC-L154A4401
1.1/4 ASA 300
1,30
1,40
25
AISI 316
FPM/
FKM
1,50
Tank unit blank cap
Repair kit
set of O-rings
Repair kit
flat seal
Set of spare parts
MK-DGC-CG100D2201
composite
FPM/
FKM
MK-DGC-O-L1-01
FPM/FKM
MK-1498-06
MK-1220-06
MK-DGC-S-L1-44
3/4
1
-
PTFE
25
AISI 316
work. press.
[bar]
material
0,001
0,002
-

picture
connection
MK-DGC-M101A4401A
3/4 BSP
PTFE
0,70
MK-DGC-M102A4401
3/4 NPT
0,80
PTFE
0,70
MK-DGC-M103A4401A
MK-DGC-M104A4401
1 BSP
1 NPT
25
AISI 316
FPM/
FKM
0,80
1.1/4 BSP
PTFE
0,70
MK-DGC-M106A4401
1.1/4 NPT
0,80
MK-DGC-M150A4401
3/4 ASA 300
MK-DGC-M124A4401
DN25 PN25/40
MK-DGC-M152A4401
1 ASA 300
MK-DGC-M126A4401
DN32 PN25/40
MK-DGC-M154A4401
1.1/4 ASA 300
MK-DGC-V100A2201
MK-DGC-M105A4401A
seal
weight
O-ring thread [kg]
code
25
AISI 316
FPM/
FKM
composite
FPM/
FKM
MK-DGC-O-M1-01
FPM/FKM
MK-1498-06
MK-1220-06
MK-DGC-S-M1-44
3/4
1
-
Repair kit
set of O-rings
Repair kit
flat seal
Set of spare parts
PTFE
25
AISI 316
0,001
0,002
-
425

picture
code
connection
MK-DGC-L207A4401A
1.1/2 BSP
MK-DGC-L208A4401
1.1/2 NPT
work. press.
[bar]
25
material
AISI 316
seal
weight
O-ring thread [kg]
FPM/
FKM
PTFE
1,50
1,60
PTFE
1,20
1,30
MK-DGC-L210A4401A
2 BSP
MK-DGC-L211A4401
2 NPT
MK-DGC-L228A4401
DN40 PN25/40
MK-DGC-L256A4401
1.1/2 ASA 300
MK-DGC-L231A4401
DN50 PN25/40
MK-DGC-L258A4401
2 ASA 300
MK-DGC-C200D1300
PVC/NBR
MK-DGC-O-L2-01
FPM/FKM
MK-1196-06
MK-1052-06
MK-DGC-S-L2-44
1.1/2
2
PTFE
25
AISI 316
work. press.
[bar]
material
2,80
25
AISI 316
FPM/
FKM
3,20
3,50
Tank unit blank cap
Repair kit
set of O-rings
Repair kit
flat seal
Set of spare parts
0,003
0,004
-

picture
code
connection
MK-DGC-M207A4401A
1.1/2 BSP
MK-DGC-M208A4401
1.1/2 NPT
25
AISI 316
seal
weight
O-ring thread [kg]
FPM/
FKM
PTFE
3,10
3,20
PTFE
2,90
3,00
MK-DGC-M210A4401A
2 BSP
MK-DGC-M211A4401
2 NPT
MK-DGC-M228A4401
DN40 PN25/40
MK-DGC-M256A4401
1.1/2 ASA 300
MK-DGC-M231A4401
DN50 PN25/40
MK-DGC-M258A4401
2 ASA 300
MK-DGC-V200A2201
composite
FPM/
FKM
MK-DGC-O-M2-01
FPM/FKM
MK-1196-06
MK-1052-06
MK-DGC-S-M2-44
1.1/2
2
PTFE
25
AISI 316
5,30
25
AISI 316
FPM/
FKM
5,70
6,10
Repair kit
set of O-rings
Repair kit
flat seal
Set of spare parts
426
0,003
0,004
-

picture
code
connection
MK-DGC-L414B4401A
3 BSP
work. press.
[bar]
seal
weight
O-ring thread [kg]
AISI 316
FPM/
FKM
PTFE
25
material
3,00
MK-DGC-L415B4401
3 NPT
MK-DGC-L434B4401
DN65 PN25/40
MK-DGC-L460B4401
2.1/2 ASA 300
MK-DGC-L437B4401
DN80 PN25/40
MK-DGC-L462B4401
3 ASA 300
MK-DGC-C400E2202
composite
FPM/
FKM
MK-DGC-O-L4-01
FPM/FKM
MK-1110-06
PTFE
0,006
MK-DGC-S-L4-44
25
AISI 316
code
connection
work. press.
[bar]
material
MK-DGC-M412B4401A
2.1/2 BSP
MK-DGC-M413B4401
2.1/2 NPT
5,00
25
AISI 316
FPM/
FKM
5,50
Tank unit blank cap
Repair kit
set of O-rings
Repair kit
flat seal
Set of spare parts
Hose unit- size 3 ( 119)

picture
25
AISI 316
seal
weight
O-ring thread [kg]
FPM/
FKM
PTFE
8,80
9,10
PTFE
8,10
8,40
MK-DGC-M414B4401A
3 BSP
MK-DGC-M415B4401
3 NPT
MK-DGC-M434B4401
DN65 PN25/40
MK-DGC-M460B4401
2 ASA 300
MK-DGC-M437B4401
DN80 PN25/40
MK-DGC-M462B4401
3 ASA 300
MK-DGC-P400A2201
composite
FPM/
FKM
MK-DGC-O-M4-01
FPM/FKM
MK-1181-06
MK-1110-06
MK-DGC-S-M4-44
2.1/2
3
-
PTFE
25
AISI 316
12,60
25
AISI 316
FPM/
FKM
13,30
13,20
15,10
Repair kit
set of O-rings
Repair kit
flat seal
Set of spare parts
0,006
0,007
-
427

picture
code
connection
MK-DGC-L516B4401A
4 BSP
work. press.
[bar]
25
MK-DGC-L517B4401
4 NPT
MK-DGC-L540B4401
DN100 PN25/40
material
seal
weight
O-ring thread [kg]
AISI 316
FPM/
FKM
PTFE
6,10
6,30
25
AISI 316
FPM/
FKM
9,30
MK-DGC-L564B4401
4 ASA 300
MK-DGC-C500E2202
composite
FPM/
FKM
MK-DGC-O-L5-01
FPM/FKM
MK-1295-06
PTFE
0,009
MK-DGC-S-L5-44
25
AISI 316
code
connection
work. press.
[bar]
material
MK-DGC-M516B4401A
4 BSP
Tank unit blank cap
Repair kit
set of O-rings
Repair kit
flat seal
Set of spare parts

picture
25
MK-DGC-M517B4401
4 NPT
MK-DGC-M540B4401
DN100 PN25/40
AISI 316
seal
weight
O-ring thread [kg]
PTFE
15,70
16,00
FPM/
FKM
20,80
25
AISI 316
FPM/
FKM
MK-DGC-M564B4401
4 ASA 300
24,30
MK-DGC-P500B2201
composite
FPM/
FKM
MK-DGC-O-M5-01
FPM/FKM
MK-1295-06
PTFE
0,009
MK-DGC-S-M5-44
25
AISI 316
Repair kit
set of O-rings
Repair kit
flat seal
Set of spare parts
428

Dry disconnect couplings - DAC
Material:
Seals:
Aluminium (AISI 316 version available).

O-ring: FPM (Viton), NBR,
for low working temperature, FQM
Flat seal: PTFE.
(other materials on request)
Connections:
BSP, NPT thread,
DIN, ASA, TW and TTMA flanges.
A wider working temperature range is acceptable, but as it
depends on the medium, confirm the working temperature
of each application with Technical Department of TUBES
INTERNATIONAL.
Operation
A hose unit (coupler) and a tank unit (adaptor) of DAC type (Dry Aviation Coupling) are both equipped with piston
spillage. The head of the hose unit is rotary (360). To allow fluid flow both units must be coupled by rotating the
head of the hose unit about 100 clockwise. During rotation the coupling locks, the valve of the hose unit slides
towards the tank unit and the medium starts to flow. To stop fluid flow, turn the head of the hose unit anticlockwise
so the valves close and the coupling disconnects.
Application
DAC couplings are designed for jet fuel transfer. They are widely used in road and air transport. They meet all
requirements for safe, reliable and environment friendly transfer of hazardous, toxic or valuable products. Not
suitable for underwing refuelling. It can be mounted on a flexible hose assembly on the side of a tank truck or
storage container.
Standards
Meet the requirements of ATEX, ADR, TDT, Pressure Equipment Directive 97/23/EC (PED). Compatible with aviation
couplings according to NATO STANAG 3105. Manufactured according to ISO 45, MS24484, British Aerospace
Spec. 2C14.
Spillage
Once DAC 2.1/2 coupling is disconnected, the spillage amounts to 1,1 ml.
pressure drop [bar]
2.1/2
Test parameters:
Medium: n-paraffin
Temperature: +20C
flow rate [l/min]
429

Dry disconnect couplings - DAC
Tank unit- size 2.1/2
picture
Tank unit blank cap
code
connection
MK-DAC-G312A1401B
2.1/2 BSP
MK-DAC-G314A1401B
3 BSP
work. press.
[bar]
10
MK-DAC-G313A1401
2.1/2 NPT
MK-DAC-G315A1401
3 NPT
MK-DAC-G333D1401
MK-DAC-G336D1401
MK-DAC-G359D1401
MK-DAC-G361D1401
MK-DAC-G367D1401
MK-DAC-G368D1401
MK-DAC-G365D1401
MK-DAC-G366D1401
DN65 PN10/16
DN80 PN10/16
2.1/2 ASA 150
3 ASA 150
3 TTMA
4 TTMA
TW 1 (DIN 28459)
TW 3 (DIN 28459)
10
aluminium
FPM/
FKM
aluminium
aluminium
composite
FPM/
FKM
FPM/
FKM
FPM/FKM
2.1/2 BSP
PUR
2.1/2
10
aluminium
code
connection
work. press.
[bar]
material
MK-DAC-F312B1101B
2.1/2 BSP
MK-DAC-F314B1101B
3 BSP
MK-1181-09
MK-DAC-S-G3-14
2,30
-
MK-DAC-K300A1101
MK-DAC-O-G3-01
seal
weight
O-ring thread [kg]
PUR
MK-DAC-K300A2201
Repair kit
set of O-rings
Repair kit
flat seal
Set of spare parts
material
2,80
3,00
2,70
2,90
2,40
2,60
2,50
2,90
0,50
0,20
-0,005
--
Hose unit - size 2.1/2

picture
PUR
10
MK-DAC-F313B1101
2.1/2 NPT
MK-DAC-F315B1101
3 NPT
MK-DAC-F333B1101
MK-DAC-F336B1101
MK-DAC-F359B1101
MK-DAC-F361B1101
MK-DAC-F367B1101
MK-DAC-F368B1101
MK-DAC-F365B1101
MK-DAC-F366B1101
DN65 PN10/16
DN80 PN10/16
2.1/2 ASA 150
3 ASA 150
3 TTMA
4 TTMA
TW 1 (DIN 28459)
TW 3 (DIN 28459)
10
MK-DAC-I300A1101
430
MK-DAC-O-F3-01
MK-1181-09
MK-DAC-S-F3-11
aluminium
FPM/
FKM
-
aluminium
aluminium
MK-DAC-I300A2201
Repair kit
set of O-rings
Repair kit
flat seal
Set of spare parts
seal
weight
O-ring thread [kg]
composite
FPM/
FKM
FPM/
FKM
3,40
3,50
3,40
3,50
0,40
0,20
FPM/FKM
2.1/2 BSP
PUR
0,005
2.1/2
10
aluminium
--

Dry disconnect couplings - DRY-DIS TR
Material:
SS (AISI 316 / AISI 316Ti)

Ms - brass, PP - polypropylene
(handwheel, blank plug/cap)
Seals:
Viton - valves
Connections:
BSP female thread
Seal:
PTFE for SS couplings
PUR for Ms couplings
Working press.:
Up to 25 bar
Max. conn. press.: 6 bar
Working temp.:
From 0C up to +150C
(Ms up to +60C)
Operation
A hose unit (coupler) and a tank unit (adaptor) of DRY-DIS TR coupling are both equipped with piston valves which
can be opened only after the coupling is connected and closed before it is disconnected. It prevents spillage. The
head of the hose unit, sizes DN 40 upwards, with polypropylene handwheel facilitates connection. The coupling
is connected by sliding the hose unit over the tank unit and turning the handwheel by 10 clockwise. To allow fluid
flow both units must be secured by further rotation up to 120 clockwise. To stop fluid flow, turn the head of the
hose unit anticlockwise so the valves close and the coupling disconnects. A coded version of the coupling is also
available. It prevents connecting the hose unit to the wrong tank unit, conveying other fluid.
Application
They are widely used in chemical, pharmaceutical, petrochemical, food industry and in reloading applications. They
meet all requirements for safe, reliable and environment friendly transfer of hazardous, toxic or valuable fluids and
gases. They come in a wide range of sizes (DN 25, 32, 40, 50, 65, 80 and 100 mm).
Standards
Manufactured according to the standards of the producer (Roman Seliger, Germany). Compliant with the Pressure
Equipment Directive (CE marking) and the ATEX Directive for operation in potentially explosive atmospheres.
tank unit - adaptor
hose unit - coupler
To connect:
431

Dry disconnect couplings - DRY-DIS TR
picture
code
RS-558025100120
RS-558025100130
RS-558032125120
RS-558032125130
RS-558040150120
RS-558040150130
TRV
RS-558050200120
tank unit - adaptor
RS-558050200130
RS-558065250120
RS-558065250130
RS-558080300120
RS-558080300130
RS-558100400120
RS-558100400130
RS-561025100120
RS-561025100130
TRM
RS-561032125120
RS-561032125130
RS-561040150120
RS-561040150130
RS-561050200120
RS-561050200130
TRM
hose unit - coupler
RS-561065250120
RS-561065250130
RS-561080300120
RS-561080300130
RS-561100400120
RS-561100400130
TRS
hose unit blank plug
TRK
tank unit blank cap
432
size
DN
thread
25
1 BSP
32
1.1/4 BSP
40
1.1/2 BSP
50
2 BSP
65
2.1/2 BSP
80
3 BSP
100
4 BSP
25
1 BSP
32
1.1/4 BSP
40
1.1/2 BSP
50
2 BSP
65
2.1/2 BSP
80
3 BSP
100
4 BSP
material
weight
[kg]
pic.
SS
0,28
Ms
0,30
SS
0,50
Ms
0,53
SS
0,75
Ms
0,79
SS
1,20
Ms
1,28
SS
1,70
Ms
1,82
SS
3,20
Ms
3,45
SS
5,10
Ms
5,45
SS
0,85
Ms
0,91
SS
1,50
Ms
1,62
SS
2,00
Ms
2,15
SS
3,90
Ms
4,20
SS
5,10
Ms
5,50
SS
6,20
Ms
6,70
SS
11,50
Ms
12,35
RS-564025000500
25
PP
0,03
RS-564032000500
32
PP
0,05
RS-564040000500
40
PP
0,07
RS-564050000500
50
PP
0,11
RS-564065000500
65
PP
0,14
RS-564080000500
80
PP
0,22
RS-564100000500
100
PP
0,32
RS-567025000500
25
PP
0,05
RS-567032000500
32
PP
0,07
RS-567040000500
40
PP
0,10
RS-567050000500
50
PP
0,14
RS-567065000500
65
PP
0,21
RS-567080000500
80
PP
0,28
RS-567100000500
100
PP
0,50

Dry disconnect couplings - DRY-LINK
Material:
Seal:
Connections:
Working press.:
AISI 316
PTFE, Viton, EPDM, Chemraz
BSP or NPTF female thread
14,3 bar - for 1 and 1.1/2
10,3 bar - for 2
8,3 bar - for 3
Vacuum:
Up to 0,95 bar
Working temp.: From -30C up to +110C (Viton,
EPDM, Chemraz)
From -7C up to +110C (PTFE)
Operation
A coupler (hose unit) and an adaptor (tank unit) of DRY-LINK coupling are both equipped with butterfly valves. The
units connect when the coupler slides over the adaptor and locking arm is pushed down. To allow fluid flow the
locking arm must be secured by turning the handle of the valve by 90. Advantages of the coupling: light weight,
very little pressure drop and easy operation. Mechanical interlock (locking arm) prevents accidental opening.
Application
DRY LINK couplings are designed for safe and spill free connection within installation (spillage is too small to be
measured). Widely used in petrochemical, pharmaceutical and food industry. They meet the most demanding
requirements for safe handling and environment protection. Perfectly suited for high viscosity fluids. Available with
ASA flanges, TRICLOVER or weld-in fittings, as a polished hygienic version or made of Alloy 20 or Hastelloy C
for highly corrosive applications.
pressure drop [bar]
pressure drop [bar]
Hastelloy C
flow rate [l/min]
AISI 316 a Alloy 20
flow rate [l/min]
To connect:
433

picture
Coupler DLF
Coupler DLF
Seals
O-rings
434
code
connection
AC-DLF-100-T-BSP
AC-DLF-100-T-NPT
AC-DLF-150-T-BSP
AC-DLF-150-T-NPT
AC-DLF-100-V-BSP
AC-DLF-100-V-NPT
AC-DLF-150-V-BSP
AC-DLF-150-V-NPT
AC-DLF-100-E-BSP
AC-DLF-100-E-NPT
AC-DLF-150-E-BSP
AC-DLF-150-E-NPT
AC-DLF-100-C-BSP
AC-DLF-100-C-NPT
AC-DLF-150-C-BSP
AC-DLF-150-C-NPT
AC-DLF-200-T-BSP
AC-DLF-200-T-NPT
AC-DLF-200-V-BSP
AC-DLF-200-V-NPT
AC-DLF-200-E-BSP
AC-DLF-200-E-NPT
AC-DLF-200-C-BSP
AC-DLF-200-C-NPT
AC-DLF-300-T-BSP
AC-DLF-300-T-NPT
AC-DLF-300-V-BSP
AC-DLF-300-V-NPT
AC-DLF-300-E-BSP
AC-DLF-300-E-NPT
AC-DLF-300-C-BSP
AC-DLF-300-C-NPT
AC-DLF-400-T-BSP
AC-DLF-400-T-NPT
AC-DLF-400-V-BSP
AC-DLF-400-V-NPT
AC-DLF-400-E-BSP
AC-DLF-400-E-NPT
AC-DLF-400-C-BSP
AC-DLF-400-C-NPT
AC-DL-K010250131
AC-DL-K015250131
AC-DL-K020250131
AC-DL-K030250131
AC-DL-K020250201
AC-DL-K030250201
AC-DL-K010250A3B
AC-DL-K014250A3B
AC-DL-K020250301
AC-DL-K030250301
AC-DL-K010250121
AC-DL-K015250121
AC-DL-K020250121
AC-DL-K030250121
AC-DL-K020250221
AC-DL-K030250221
AC-DL-K020250321
AC-DL-K030250321
1 BSP female
1 NPT female
1.1/2 BSP female
1.1/2 NPT female
1 BSP female
1 NPT female
1.1/2 BSP female
1.1/2 NPT female
1 BSP female
1 NPT female
1.1/2 BSP female
1.1/2 NPT female
1 BSP female
1 NPT female
1.1/2 BSP female
1.1/2 NPT female
2 BSP female
2 NPT female
2 BSP female
2 NPT female
2 BSP female
2 NPT female
2 BSP female
2 NPT female
3 BSP female
3 NPT female
3 BSP female
3 NPT female
3 BSP female
3 NPT female
3 BSP female
3 NPT female
4 BSP female
4 NPT female
4 BSP female
4 NPT female
4 BSP female
4 NPT female
4 BSP female
4 NPT female
1
1.1/2
2
3
2
3
1
1.1/2
2
3
1
1.1/2
2
3
2
3
2
3
working press.
[bar]
material
seal
weight
[kg]
0,90
PTFE
1,50
0,90
Viton
1,50
14.3
AISI 316
0,90
EPDM
1,50
0,90
Chemraz
1,50
PTFE
Viton
10.3
2,30
EPDM
Chemraz
PTFE
Viton
6,40
AISI 316
EPDM
Chemraz
8.3
PTFE
Viton
7,70
EPDM
Chemraz
PTFE
Viton
EPDM
Chemraz
PTFE
-
Viton
EPDM

picture
Adaptor DLM
Adaptor DLM
Seals
O-rings
code
connection
AC-DLM-100-T-BSP
AC-DLM-100-T-NPT
AC-DLM-150-T-BSP
AC-DLM-150-T-NPT
AC-DLM-100-V-BSP
AC-DLM-100-V-NPT
AC-DLM-150-V-BSP
AC-DLM-150-V-NPT
AC-DLM-100-E-BSP
AC-DLM-100-E-NPT
AC-DLM-150-E-BSP
AC-DLM-150-E-NPT
AC-DLM-100-C-BSP
AC-DLM-100-C-NPT
AC-DLM-150-C-BSP
AC-DLM-150-C-NPT
AC-DLM-200-T-BSP
AC-DLM-200-T-NPT
AC-DLM-200-V-BSP
AC-DLM-200-V-NPT
AC-DLM-200-E-BSP
AC-DLM-200-E-NPT
AC-DLM-200-C-BSP
AC-DLM-200-C-NPT
AC-DLM-300-T-BSP
AC-DLM-300-T-NPT
AC-DLM-300-V-BSP
AC-DLM-300-V-NPT
AC-DLM-300-E-BSP
AC-DLM-300-E-NPT
AC-DLM-300-C-BSP
AC-DLM-300-C-NPT
AC-DLM-400-T-BSP
AC-DLM-400-T-NPT
AC-DLM-400-V-BSP
AC-DLM-400-V-NPT
AC-DLM-400-E-BSP
AC-DLM-400-E-NPT
AC-DLM-400-C-BSP
AC-DLM-400-C-NPT
AC-DL-K010250141
AC-DL-K015250141
AC-DL-K020250141
AC-DL-K030250141
AC-DL-K020250201
AC-DL-K030250201
AC-DL-K010260B3B
AC-DL-K014260B3B
AC-DL-K020250301
AC-DL-K030250301
AC-DL-K010250121
AC-DL-K015250121
AC-DL-K020250121
AC-DL-K030250121
AC-DL-K020250221
AC-DL-K030250221
AC-DL-K020250321
AC-DL-K030250321
1 BSP female
1 NPT female
1.1/2 BSP female
1.1/2 NPT female
1 BSP female
1 NPT female
1.1/2 BSP female
1.1/2 NPT female
1 BSP female
1 NPT female
1.1/2 BSP female
1.1/2 NPT female
1 BSP female
1 NPT female
1.1/2 BSP female
1.1/2 NPT female
2 BSP female
2 NPT female
2 BSP female
2 NPT female
2 BSP female
2 NPT female
2 BSP female
2 NPT female
3 BSP female
3 NPT female
3 BSP female
3 NPT female
3 BSP female
3 NPT female
3 BSP female
3 NPT female
4 BSP female
4 NPT female
4 BSP female
4 NPT female
4 BSP female
4 NPT female
4 BSP female
4 NPT female
1
1.1/2
2
3
2
3
1
1.1/2
2
3
1
1.1/2
2
3
2
3
2
3
working press.
[bar]
material
seal
weight
[kg]
0,80
PTFE
1,40
0,80
Viton
1,40
14.3
AISI 316
0,80
EPDM
1,40
0,80
Chemraz
1,40
PTFE
Viton
10.3
1,40
EPDM
Chemraz
PTFE
Viton
4,10
AISI 316
EPDM
Chemraz
8.3
PTFE
Viton
5,90
EPDM
Chemraz
PTFE
Viton
EPDM
Chemraz
PTFE
-
Viton
EPDM
435

Dry disconnect couplings - EPSILON
Coupling :
AISI 316, AISI 316L

(Hastelloy C-276 available)
TFM (PFA available)
Seal:
BSP or NPT female thread,
Connections:
DIN or ASA flanges, Triclover, weld-in
Under pressure: Full vacuum
Working temp.: From -30C up to +120C (PFA)
From -30C up to +230C (TFM)
0,7 ml (1), 0,8 ml (2), 2 ml (3)
Max. spillage:
Flow factor cv: 42 (1), 160 (2), 240 (3)
Operation
The connection between halves is possible when ramped lug and flange interfaces are aligned, connected with
a push, followed by 90 turn. To allow fluid flow the valves of the coupling must be opened in correct order - first
the valve of the coupler and the valve of the adaptor second (order marked on the handles). The valves cannot be
opened when the coupling halves are disconnected. The design of the coupling, a ball valve in each half, provides an
unrestricted flow path. EPSILON is a dry disconnect coupling of the highest quality and highest working parameters.
The fluid path is made of AISI 316/316L steel or Hastelloy C-276 (a coupling entirely made of Hastelloy C-276 is
available). Each U-Cup seal, made of modified PTFE (TFM or PFA) is energized with a Hastelloy C-276 spring to
provide initial sealing, including high, low and full vacuum. EPSILON couplings ensure the lowest spillage rates
at connection/disconnection and reduced emission of volatile organic compounds - less than 25 ppm at operator
exposable distance. Available with polyethylene blank plugs/caps as a standard. Stainless steel pressure dust
cups are available on request.
Application
Widely used in chemical, pharmaceutical, petrochemical industry for industrial processes and reloading of valuable
and hazardous media.
pressure drop [psi]
Standards
Approved by TSSA (Technical Standards and Safety Authority), AAR (Association of American Railroads),TV.
flow rate [gallon/min]
436
valve size
connection size
3/4, 1, DN20, DN25
1.1/2, 2, DN40, DN50
3, DN80

Dry disconnect couplings - EPSILON
picture
Coupler - hose unit
Coupler - hose unit
Adaptor - tank unit
Adaptor - tank unit
code
connection
OW-ZE16HS12A-01101
OW-ZE16HS12B-01101
OW-ZE16HS16A-01101
OW-ZE16HS16B-01101
OW-ZE32HS24A-01101
OW-ZE32HS24B-01101
OW-ZE32HS32A-01101
OW-ZE32HS32B-01101
OW-ZE48HS48A-01101
OW-ZE48HS48B-01101
OW-ZE16HS12J-01101
OW-ZE16HS12D-01101
OW-ZE16HS12L-01101
OW-ZE16HS16J-01101
OW-ZE16HS16D-01101
OW-ZE16HS16L-01101
OW-ZE32HS24J-01101
OW-ZE32HS24D-01101
OW-ZE32HS24L-01101
OW-ZE32HS32J-01101
OW-ZE32HS32D-01101
OW-ZE32HS32L-01101
OW-ZE48HS48J-01101
OW-ZE48HS48D-01101
OW-ZE48HS48L-01101
OW-ZE16AS12A-01101
OW-ZE16AS12B-01101
OW-ZE16AS16A-01101
OW-ZE16AS16B-01101
OW-ZE32AS24A-01101
OW-ZE32AS24B-01101
OW-ZE32AS32A-01101
OW-ZE32AS32B-01101
OW-ZE48AS48A-01101
OW-ZE48AS48B-01101
OW-ZE16AS12J-01101
OW-ZE16AS12D-01101
OW-ZE16AS12L-01101
OW-ZE16AS16J-01101
OW-ZE16AS16D-01101
OW-ZE16AS16L-01101
OW-ZE32AS24J-01101
OW-ZE32AS24D-01101
OW-ZE32AS24L-01101
OW-ZE32AS32J-01101
OW-ZE32AS32D-01101
OW-ZE32AS32L-01101
OW-ZE48AS48J-01101
OW-ZE48AS48D-01101
OW-ZE48AS48L-01101
3/4 NPT female

3/4 BSP female
1 NPT female
1 BSP female
1.1/2 NPT female
1.1/2 BSP female
2 NPT female
2 BSP female
3 NPT female
3 BSP female
DN20 PN16
3/4 150PSI
DN20 PN40
DN25 PN16
1 150PSI
DN25 PN40
DN40 PN16
1.1/2 150PSI
DN40 PN40
DN50 PN16
2 150PSI
DN50 PN40
DN80 PN16
3 150PSI
DN80 PN40
3/4 NPT female
3/4 BSP female
1 NPT female
1 BSP female
1.1/2 NPT female
1.1/2 BSP female
2 NPT female
2 BSP female
3 NPT female
3 BSP female
DN20 PN16
3/4 150PSI
DN20 PN40
DN25 PN16
1 150PSI
DN25 PN40
DN40 PN16
1.1/2 150PSI
DN40 PN40
DN50 PN16
2 150PSI
DN50 PN40
DN80 PN16
3 150PSI
DN80 PN40
working press.
[bar]
material
seal
weight
[kg]
1,40
30
AISI 316
TFM
2,70
25
8,60
16
30
16
30
16
AISI 316
TFM
30
16
30
16
25
1,20
30
AISI 316
TFM
1,80
25
7,30
16
30
16
30
16
AISI 316
TFM
30
16
30
16
25
437

Dry disconnect couplings - DRY-MATE SS
Material:
Seal:
AISI 316
PTFE - valve
Viton - coupling
(EPDM and Kalrez available)
Connections: BSP or NPT female thread
(thread seal)
Max. spillage: 1 ml (1) and 2 ml (1.1/2 and 2)
Operation
The halves of the coupling connect similar to CAMLOCK coupling - cam levers must be closed. When the valves
of the connected coupling are being opened, the locking yoke automatically interlocks the cam levers - prevents
disconnection. The adaptor must always be assembled on the side where pressure is supplied. The design of the
coupling, a ball valve in each half, provides an unrestricted flow path 1.1/2 (38 mm). The valves cannot be opened
when the coupling halves are disconnected.
Application
DRY-MATE SS is a user-friendly coupling designed for safe, virtually spill-free connection within installation. DRYMATE SS couplings are used in chemical and pharmaceutical industry, in agriculture. Not suitable for gaseous media.
adaptor (tank unit)

code
AC-DMA100-SS-BSP
AC-DMA100-SS-NPT
AC-DMA150-SS-BSP
AC-DMA150-SS-NPT
AC-DMA200-SS-BSP
AC-DMA200-SS-NPT
DN
[mm]
25
25
38
38
38
38
thread
1 BSP
1 NPT
1.1/2 BSP
1.1/2 NPT
2 BSP
2 NPT
coupler (hose unit)

weight
[kg]
1,00
1,00
2,70
2,70
2,60
2,60
code
AC-DMD100-SS-BSP
AC-DMD100-SS-NPT
AC-DMD150-SS-BSP
AC-DMD150-SS-NPT
AC-DMD200-SS-BSP
AC-DMD200-SS-NPT
DN
[mm]
25
25
38
38
38
38
Adaptors and couplers are supplied with polypropylene blank caps/plugs as a standard.
To connect:
438
thread
1 BSP
1 NPT
1.1/2 BSP
1.1/2 NPT
2 BSP
2 NPT
weight
[kg]
1,15
1,15
3,05
3,05
3,05
3,05

Dry disconnect couplings - DRY-MATE PP
Material:
Body - polypropylene reinforced with

fibre glass
Ball - PTFE
CAMLOCK levers - AISI 316
Seal:
PTFE - valve
Viton - coupling
(EPDM and Kalrez available)
Connections:
BSP or NPT female thread
(thread seal)
Working press.: Up to 7 bar (21C)
Working temp.: Up to +66C (working press. 5 bar)
Max. spillage: 2 ml
Operation
The halves of the coupling connect similar to CAMLOCK coupling - cam levers must be closed. When the valves
of the connected coupling are being opened, the locking yoke automatically interlocks the cam levers - prevents
disconnection. The adaptor must always be assembled on the side where pressure is supplied. The design of the
coupling, a ball valve in each half, provides an unrestricted flow path 1.1/2 (38 mm). The valves cannot be opened
when the coupling halves are disconnected.
Application
DRY-MATE PP is a lightweight, user friendly coupling designed for safe, virtually spill free connection within
installation. DRY-MATE PP couplings are used in chemical and pharmaceutical industry, in agriculture. Not suitable
for gaseous media and fluids with low ignition point.
adaptor (tank unit)

code
AC-DMA150-PP-BSP
AC-DMA150-PP-NPT
AC-DMA200-PP-BSP
AC-DMA200-PP-NPT
DN
[mm]
38
38
38
38
thread
1.1/2 BSP
1.1/2 NPT
2 BSP
2 NPT
coupler (hose unit)

weight
[kg]
1,20
1,20
1,20
1,20
code
AC-DMD150-PP-BSP
AC-DMD150-PP-NPT
AC-DMD200-PP-BSP
AC-DMD200-PP-NPT
DN
[mm]
38
38
38
38
thread
1.1/2 BSP
1.1/2 NPT
2 BSP
2 NPT
weight
[kg]
1,20
1,20
1,20
1,20
Adaptors and couplers are supplied with polypropylene blank caps as a standard.
To connect:
439

Emergency couplings - operation and types
An emergency coupling protects against the consequences of accidental, excessive strain of a flexible hose
assembly. It is required wherever driveaway incidents may occur - a tank truck rolls away though the assembly is
still connected. Then, not able to resist the pull force, the hose breaks causing spillage of a hazardous product.
There are two basic methods utilized to activate the breakaway couplings - breaking pins or a cable. The coupling
with breaking pins is designed to transmit the load of the strained hose to the breaking bolts. The bolts are broken
before the hose and its fittings collapse, and the coupling disconnects. Simultaneously spring valves in both coupling
halves lock so the transferred medium is not released to the atmosphere. The coupling contains three breaking
pins. After emergency situation which caused disconnection of the coupling and breaking of bolts, the coupling can
be easily connected using a new set of bolts. However before it is reused, the coupling always requires thorough
inspection.
The second type of couplings - a coupling with a cable, activates disconnection when a hose assembly connected
to a tank truck is pulled. At the same time the cable fixed to the coupling at one end and at the other to a rigid point
on the installation is strained (the cable is shorter than the flexible hose assembly). The coupling disconnects.
Simultaneously spring valves in both coupling halves lock so the transferred medium is not discharged to the
atmosphere. The coupling has three levers that connect coupling halves. The levers are released when the strain
of the cable achieves pre-determined limit. The lateral deflection of the force straining the cable from the coupling
axis must not exceed 90. After emergency situation which caused disconnection of the coupling, the coupling can
be connected once again. However before it is reused, the coupling always requires thorough inspection.
tank truck
loading / unloading
device
An emergency coupling is activated when a tank

truck drives away with a hose assembly still
connected to it.
tank truck
loading / unloading
device
440

Emergency couplings - SBC
Material:
Seals:
Aluminium, brass, AISI 316

Viton - O-ring
PTFE - flat seal of the connection side
(other also available)
Connections:
As a standard: BSP or NPT thread,
PN EN1092-1, ANSI B16.5 or TTMA flanges
Working press.: 25 bar (optionally 40 bar)
Working temp.: From -25C up to +80C (the acceptable
working temperature ranges from -54C
up to +250C for proper coupling material
and seals, after written confirmation for
application with a particular medium from
the manufacturer).
Operation
A coupling designed to transmit a load of a strained hose to breaking bolts. The bolts are broken before the hose
and its fittings collapse. The coupling disconnects. Simultaneously spring valves in both coupling halves lock,
so the transferred medium is not released to the atmosphere. The coupling contains three breaking pins. After
emergency situation which caused disconnection of the coupling and breaking of bolts, the coupling can be easily
connected using a new set of bolts. However before it is reused, the coupling always requires thorough inspection.
The breaking load can be set at a lower level, accordingly, the maximum working pressure is lower as well. The
seal made of EPDM, NBR, Chemraz or Kalrez is also available.
Application
Emergency couplings are used in industrial installations and reloading systems, to handle chemicals, fuels and gases.
Standards
The couplings meet the requirements of ATEX, ADR, RID, IMDG, Pressure Equipment Directive 97/23/EC (PED).
INDUSTRIAL SBC
MARINE SBC
The couplings disconnect at an angle ranging from 0 to 90.

The coupling is assembled on the installation at one end,
and hose assembly at the other.
The coupling is disconnected by a straight (0) pull only. Any

bending of the coupling is not transmitted to the breaking
bolts. The coupling is assembled between two hose lengths.
breaking bolts
polyurethane
protecting ring
breaking bolts
aluminium, brass or
AISI 316L steel body
and valve
standard FPM
(Viton) O-ring
polyurethane
protecting ring
aluminium, brass or
AISI 316L steel body
and valve
standard FPM
(Viton) O-ring
AISI 316 steel

inner parts
AISI 316 steel

inner parts
441

picture
442
code
connection
MK-SBC-N103D1101B
MK-SBC-N210D1101B
MK-SBC-N312D1101B
MK-SBC-N414D1101B
MK-SBC-N516D1101B
MK-SBC-N6110D1101B
MK-SBC-N103D2201B
MK-SBC-N210D2201B
MK-SBC-N312D2201B
MK-SBC-N414D2201B
MK-SBC-N516D2201B
MK-SBC-N103D4401A
MK-SBC-N210D4401A
MK-SBC-N312D4401A
MK-SBC-N414D4401A
MK-SBC-N516D4401A
MK-SBC-N6110D4401A
MK-SBC-N104D1101
MK-SBC-N211D1101
MK-SBC-N313D1101
MK-SBC-N415D1101
MK-SBC-N517D1101
MK-SBC-NV124D1101
MK-SBC-N6111D1101
MK-SBC-N104D2201
MK-SBC-N211D2201
MK-SBC-N313D2201
MK-SBC-N415D2201
MK-SBC-N517D2201
MK-SBC-N104D4401
MK-SBC-N211D4401
MK-SBC-N313D4401
MK-SBC-N415D4401
MK-SBC-N517D4401
MK-SBC-NV124D4401
MK-SBC-N6111D4401
MK-SBC-N8117D4401
MK-SBC-N123D1101
MK-SBC-N230D1101
MK-SBC-N333D1101
MK-SBC-N436D1101
MK-SBC-N539D1101
MK-SBC-N645D1101
MK-SBC-N8103D1101
MK-SBC-N123D2201
MK-SBC-N230D2201
MK-SBC-N333D2201
MK-SBC-N436D2201
MK-SBC-N539D2201
MK-SBC-N123D4401
MK-SBC-N230D4401
MK-SBC-N333D4401
MK-SBC-N436D4401
MK-SBC-N539D4401
MK-SBC-N645D4401
MK-SBC-N8103D4401
1 BSP female
2 BSP female
2.1/2 BSP female
3 BSP female
4 BSP female
6 BSP female
1 BSP female
2 BSP female
2.1/2 BSP female
3 BSP female
4 BSP female
1 BSP female
2 BSP female
2.1/2 BSP female
3 BSP female
4 BSP female
6 BSP female
1 NPT female
2 NPT female
2.1/2 NPT female
3 NPT female
4 NPT female
5 NPT female
6 NPT female
1 NPT female
2 NPT female
2.1/2 NPT female
3 NPT female
4 NPT female
1 NPT female
2 NPT female
2.1/2 NPT female
3 NPT female
4 NPT female
5 NPT female
6 NPT female
8 NPT female
DN25 PN10/16
DN50 PN10/16
DN65 PN10/16
DN80 PN10/16
DN100 PN10/16
DN150 PN10/16
DN200 PN16
DN25 PN10/16
DN50 PN10/16
DN65 PN10/16
DN80 PN10/16
DN100 PN10/16
DN25 PN10/16
DN50 PN10/16
DN65 PN10/16
DN80 PN10/16
DN100 PN10/16
DN150 PN10/16
DN200 PN16
break. force work. press.

[kN]
[bar]
3,2
9
10
15
24
54
3,2
9
16
24
38
4,8
13
22
33
52
92
3,2
9
10
15
24
37
54
3,2
9
16
24
38
4,8
13
22
33
52
81
92
165
3,2
9
10
15
24
54
165
3,2
9
16
24
38
4,8
13
22
33
52
92
165
material
seal
O-ring thread
16
aluminium
10
PUR
16
25
brass
PTFE
FPM/
FKM
aluminium
10
16
25
brass
AISI 316
aluminium
10
25
16
bronze
AISI 316
1,70
2,60
7,40
8,50
15,50
46,80
0,90
2,50
2,90
5,30
12,00
15,90
1,70
2,60
7,40
8,50
15,50
32,00
46,80
2,50
4,50
5,10
7,00
19,60
25,90
16
16
0,90
2,50
2,90
5,30
15,90
AISI 316
16
weight
[kg]
FPM/
FKM
4,20
7,30
13,20
15,10
20,70
57,60
71,00

picture
Breaking pins
Set of O-rings
Spanner
Set of spare O-rings
code
connection
breaking force
[kN]
MK-SBC-S-N1D-44-3.2
MK-SBC-S-N1D-44-4.8
MK-SBC-S-N2D-44-9.0
MK-SBC-S-N2D-44-13.0
MK-SBC-S-NVD-44-37.0
MK-SBC-S-NVD-44-81.0
MK-SBC-S-N8D-44-165.0
MK-SBC-O-N1D-01
MK-SBC-O-N2D-01
MK-SBC-O-N3D-01
MK-SBC-O-N4D-01
MK-SBC-O-N5D-01
MK-SBC-O-NVD-01
MK-SBC-O-N6D-01
MK-SBC-O-N8D-013
MK-SBC-TOOL020
MK-SBC-TOOL001
1 BSP female
1 BSP female
2 BSP female
2 BSP female
2. 1/2 BSP female
2. 1/2 BSP female
2. 1/2 BSP female
3 BSP female
3 BSP female
3 BSP female
4 BSP female
4 BSP female
4 BSP female
5 BSP female
5 BSP female
6 BSP female
6 BSP female
8 BSP female
1 BSP female
2 BSP female
2.1/2 BSP female
3 BSP female
4 BSP female
5 BSP female
6 BSP female
8 BSP female
1.1/2 - 4
-
3,2
4,8
9
13
10
16
22
15
24
33
24
38
52
37
81
54
92
165
-
material
AISI 316
FPM/FKM
SBC coupling versions
with DDC coupler
pressure drop [bar]
with swivel joint
with DGC coupler
without valves
Test parameters:
Medium: n-paraffin
Temperature: +20C
flow rate [l/min]
443

Emergency couplings - ABV
Material:
SS (AISI 316 / AISI 316Ti),

SS/ECTFE, Ms, Al
Seal:
Viton - O-ring
PTFE - for SS couplings,
PUR - for Ms, Al couplings
Connections:
BSP female thread
Working press.: 16 bar (10 bar dla Al)
Working temp.: From -20C up to +150C (for SS)
From -20C up to +60C (for Ms, Al)
Operation
A coupling designed to transmit a load of a strained hose to breaking bolts. The bolts are broken before the hose
and its fittings collapse. The coupling disconnects. Simultaneously spring valves in both coupling halves lock so
the transferred medium is not released to the atmosphere. The coupling contains three breaking pins that ensure
even distribution of axial load. If the load is lateral, the coupling disconnects earlier. The lateral deflection of the
force straining the hose from the coupling axis must not exceed 90. After emergency situation which caused
disconnection of the coupling and breaking of bolts, the coupling can be easily connected using a new set of bolts.
However before it is reused, the coupling always requires meticulous inspection.
Application
ABV emergency couplings are used in industrial installations and reloading systems, to handle chemicals, fuels
and gases.
Standards
Compliant with the Pressure Equipment Directive (CE marking) and the ATEX Directive for operation in potentially
explosive atmospheres, zone 1.
Axial force (P) breaking a coupling without pressure
DN [mm]
25
50
80
100
P [kG]
320
1000
2000
2800
flow rate [l/min]
Pressure drop in ABV and ABV-S couplings
pressure drop [bar]
Resistance of a flexible hose assembly (a hose with fittings) to axial mechanical load must be at least 1.3 times
bigger than the force breaking a coupling.
444

Emergency couplings - ABV
picture
picture
Breaking pins
O-ring
Flat seal
break. force work. press.

[kN]
[bar]
code
connection
RS-555100100141
RS-555200200141
RS-555300300141
RS-555400400141
RS-555100100131
RS-555200200131
RS-555300300131
RS-555400400131
RS-555100100121
RS-555200200121
RS-555300300121
RS-555400400121
1 BSP female
2 BSP female
3 BSP female
4 BSP female
1 BSP female
2 BSP female
3 BSP female
4 BSP female
1 BSP female
2 BSP female
3 BSP female
4 BSP female
3,2
10
20
28
3,2
10
20
28
3,2
10
20
28
RS-55510010012174
1 BSP female
3,2
RS-55520020012174
RS-55530030012174
RS-55540040012174
RS-55510010012109
RS-55520020012109
RS-55530030012109
RS-55540040012109
2 BSP female
3 BSP female
4 BSP female
1 BSP female
2 BSP female
3 BSP female
4 BSP female
10
20
28
3,2
10
20
28
RS-55510010012179
1 BSP female
3,2
RS-55520020012179
RS-55530030012179
RS-55540040012179
2 BSP female
3 BSP female
4 BSP female
10
20
28
10
material
aluminium
PUR
brass
AISI 316Ti
Viton
AISI 316
AISI 316Ti
/C4
ECTFE
16
PTFE
AISI 316
AISI 316Ti EPDM

/C4
ECTFE
breaking force
[kN]
RS-555060025042
3,2
RS-555060025102
10
RS-555060025202
20
RS-555080035282
28
1,20
3,40
5,20
2,50
6,20
10,50
1,20
2,40
5,90
10,00
2,40
5,90
10,00
1,20
2,40
5,90
10,00
2,40
5,90
9,80
AISI 316/C4
ECTFE
connection
weight
[kg]
AISI 316/C4
ECTFE
code
RS-06502300300402
RS-06501800200402
RS-06503900300402
RS-06506500400401
RS-06508000400401
RS-06508500400401
RS-010200000102
RS-010300000102
RS-010400000102
RS-010100000106
RS-010200000106
RS-010300000106
RS-010400000106
seal
O-ring thread
material
AISI 316
1
2
3
Viton
4
2
3
4
1
2
3
4
PUR
PTFE
445

Emergency couplings - ABV-S
Material:
SS (AISI 316 / AISI 316Ti),

SS/ECTFE
Seal:
Viton - O-ring
PTFE - for SS couplings
Connections:
BSP female thread
DIN PN10/16 or ASA 150 flanges
Working temp.: From-20C up to +70C
(working temperature depends on seal
and coupling material)
Operation
A coupling with a cable activates disconnection when a hose assembly connected to a tank truck is pulled. At the
same time the cable fixed to the coupling at one end and at the other to a rigid point on the installation is strained
(the cable is shorter than the flexible hose assembly). The coupling disconnects. Simultaneously spring valves in both
coupling halves lock so the transferred medium is not discharged to the atmosphere. The coupling has three levers
that connect coupling halves. The levers are released when the strain of the cable achieves pre-determined limit.
The lateral deflection of the force straining the cable from the coupling axis must not exceed 90. After emergency
situation which caused disconnection of the coupling, the coupling can be connected once again. However before
it is reused, the coupling always requires thorough inspection.
Application
ABV-S emergency couplings are used in industrial installations and reloading systems, to handle chemicals,
fuels and gases. Compared to ABV couplings with breaking bolts, ABV-S couplings are more adjustable so can
be activated with little force. Thus they can be used on installations that cannot handle excessive loads. When
compared: ABV DN 50 coupling activates at 7,8 kN (pressure: 16 bar, angle: 0), whereas ABV-S DN 50 at 0,3
kN (pressure: 25 bar, angle: 0).
Standards
Pressure drop in ABVF-S coupling
DN
[mm]
25
50
80
100
150
200
P [kN]
angle 0
0,4
0,3
0,5
1,5
2,4
3
angle 90
0,5
0,6
0,9
1,8
4,9
6,3
flow rate [m3/h]
Force (P) that strains a cable

and causes coupling disconnection
at 25 bar:
pressure drop [bar]
446

Emergency couplings - ABV-S
picture
ABV-S
ABVF-S
Set of flat seals

and O-rings
Protection ring
code
connection
RS-556100100121
RS-556200200121
RS-556300300121
RS-556400400121
RS-55610010012174
RS-55620020012174
RS-55630030012174
RS-55640040012174
RS-55610010012109
RS-55620020012109
RS-55630030012109
RS-55640040012109
RS-55610010012110
RS-55620020012110
RS-55630030012110
RS-55640040012110
1 BSP female
2 BSP female
3 BSP female
4 BSP female
1 BSP female
2 BSP female
3 BSP female
4 BSP female
1 BSP female
2 BSP female
3 BSP female
4 BSP female
1 BSP female
2 BSP female
3 BSP female
4 BSP female
RS-553600600220
DN 150 PN10/16
RS-553600600720
6 ASA 150 psi
RS-553600600420
DN 150 PN25
RS-553600600820
6 ASA 300 psi
RS-553800800120
DN 200 PN10
RS-553800800220
DN 200 PN16
RS-553800800720
8 ASA 150 psi
RS-550200200104
RS-550200200105
RS-550200200106
RS-550300300104
RS-550300300106
RS-550400400104
RS-550400400106
RS-550600600004
RS-550600600006
RS-550800800004
RS-554050200003
RS-554080300003
RS-554100400003
work. press.
[bar]
material
thread
AISI 316
Viton
AISI 316/
C4/ECTFE
25
PTFE
EPDM
AISI 316
Kalrez
4079
25
41,10
41,50
AISI 316
Viton
10
98,40
102,30
DN 80
-
DN 100
DN 150
49,10
98,40
16
weight
[kg]
1,15
3,85
7,95
14,35
1,15
3,85
7,95
14,35
1,15
3,85
7,95
14,35
1,15
3,85
7,95
14,35
37,50
16
DN 50
DN 200
DN 50
DN 80
DN 100
seal
O-ring
PE
Viton
EPDM
FEP
Viton
FEP
Viton
FEP
Viton
FEP
Viton
-
PTFE
-
447

Emergency couplings - KLAW
Material:
Stainless steel, carbon steel,

aluminium
Seal:
Viton, PTFE
Connections:
BSP or BSPT thread, flanges,
weld-in connectors
Sizes:
From 1 to 12
(depends on a size)
Operation
KLAW emergency couplings protect against consequences of accidental, excessive strain of a flexible hose assembly
connected to an installation. The coupling with breaking pins is designed to transmit the load of the strained hose
to the pre-determined breaking bolts. The bolts are broken before the hose and its fittings collapse. The coupling
disconnects. Simultaneously flap valves (Flip-Flap) in both coupling halves lock so the transferred medium is not
released to the atmosphere. The coupling contains three breaking pins that ensure even distribution of axial load.
If the load is lateral, the coupling disconnects earlier. The lateral deflection of the force straining the hose from the
coupling axis must not exceed 90. After emergency situation which caused disconnection of the coupling and
breakage of bolts, the coupling can be easily connected using a new set of bolts. However before it is reused, the
coupling always requires meticulous inspection.
Available versions:
- MARINE - reloading in marine applications, assembled between two hose lengths,
- ERC - coupling with a cable, used with loading arms and other applications
- CRYOGENIC - for cryogenic media (down to -196C - LNG, liquid oxygen, ethylene, propylene, ethane).
Application
KLAW emergency couplings are used in industrial installations and reloading systems, to handle chemicals, fuels
and gases.
pressure drop [bar]
Standards
flow rate [l/min]
448

Rail tanker couplings
To allow bottom loading and unloading of e.g. fuel, rail tankers are equipped with pipe stubs finished with M130x6
male thread, M130x9 or M140x10 male thread (at the lower part of a rail tanker). To allow top loading and unloading
they include flange pipe stubs (the upper part of a rail tanker - under a hatch). Flange connectors serve as vapour
recovery units.
picture
code
ZK-N-130-06-A
ZK-N-130-06-M
ZK-N-130-09-A
ZK-N-130-09-M
ZK-N-140-10-A
ZK-N-140-10-M
ZK-NHD-130-06-A
ZK-NHD-130-06-M
ZK-NHD-130-09-A
ZK-NHD-130-09-M
NHD
N-SS
ZK-NHD-140-10-A
ZK-NHD-140-10-M
size
M130x6
M130x9
M140x10
M130x6
M130x9
M140x10
brass
aluminium
brass
brass
aluminium
brass
aluminium
brass
brass
ZK-N-130-09-SS
M130x9
AISI 316
Railway nut.
Version for hook spanner
available.
aluminium
DN 75
ZK-TG-075-SS
brass
AISI 316
ZK-TG-100-A
ZK-TG-100-SS
Railway nut (heavy duty).

Version for hook spanner
available.
aluminium
AISI 316
ZK-TG-100-M
Railway nut.
aluminium
M130x6
ZK-TG-075-M
description
aluminium
ZK-N-130-06-SS
ZK-TG-075-A
TG
material
aluminium
DN 100
TG fitting for railway nut.
brass
AISI 316
449

Rail tanker couplings
picture
code
size
ZK-TK-075-A
ZK-TK-075-M
TK
DN 75
NSGZ
NSK
ZK-ZKK-CA-100-A
ZK-ZKK-GZ-100-A
ZKK
450
brass
AISI 316
ZK-TS-100-A
ZK-TS-100-SS
ZK-NSGZ-130-06-075-A
ZK-NSGZ-130-06-075-M
ZK-NSGZ-130-06-075-SS
ZK-NSGZ-130-09-075-A
ZK-NSGZ-130-09-075-M
ZK-NSGZ-130-09-075-SS
ZK-NSGZ-130-06-100-A
ZK-NSGZ-130-06-100-M
ZK-NSGZ-130-06-100-SS
ZK-NSGZ-130-09-100-A
ZK-NSGZ-130-09-100-M
ZK-NSGZ-130-09-100-SS
ZK-NSK-130-06-075-A
ZK-NSK-130-06-075-M
ZK-NSK-130-06-075-SS
ZK-NSK-130-09-075-A
ZK-NSK-130-09-075-M
ZK-NSK-130-09-075-SS
ZK-NSK-130-06-100-A
ZK-NSK-130-06-100-M
ZK-NSK-130-06-100-SS
ZK-NSK-130-09-100-A
ZK-NSK-130-09-100-M
ZK-NSK-130-09-100-SS
TK adaptor for railway

nut CAMLOCK A.
aluminium
DN 75
ZK-TS-075-SS
ZK-TS-100-M
brass
AISI 316
ZK-TS-075-A
TS
description
aluminium
ZK-TK-075-SS
ZK-TS-075-M
material
aluminium
DN 100
M130x6
/ 3 male
M130x9
/ 3 male
M130x6
/ 4 male
M130x9
/ 4 male
M130x6
/ DN 75
M130x9
/ DN 75
M130x6
/ DN 100
M130x9
/ DN 100
DN100
4 male
TS fitting for railway nut.
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
Adaptor NSGZ
Seal: NBR (made of
Viton available).
Adaptor
NSK / Camlock A.
Seal: NBR (made of
Viton available).
aluminium
Railway coupling ZKK /

Camlock A.
Seal: NBR (made of
Viton available).
aluminium
Railway coupling ZKK

/ male.
Seal: NBR (made of
Viton available).

Sight glasses
picture
code
FLGZ
FLFL
GWGW
GZGZ
GWGZ
FLK
GWK
ZP-P-FLGZ2-A
ZP-P-FLGZ2-M
ZP-P-FLGZ2-SS
ZP-P-FLGZ3-A
ZP-P-FLGZ3-M
ZP-P-FLGZ3-SS
ZP-P-FLGZ4-A
ZP-P-FLGZ4-M
ZP-P-FLGZ4-SS
ZP-P-FLFL2-A
ZP-P-FLFL2-M
ZP-P-FLFL2-SS
ZP-P-FLFL3-A
ZP-P-FLFL3-M
ZP-P-FLFL3-SS
ZP-P-FLFL4-A
ZP-P-FLFL4-M
ZP-P-FLFL4-SS
ZP-P-GWGW2-A
ZP-P-GWGW2-M
ZP-P-GWGW2-SS
ZP-P-GWGW3-A
ZP-P-GWGW3-M
ZP-P-GWGW3-SS
ZP-P-GWGW4-A
ZP-P-GWGW4-M
ZP-P-GWGW4-SS
ZP-P-GZGZ2-A
ZP-P-GZGZ2-M
ZP-P-GZGZ2-SS
ZP-P-GZGZ3-A
ZP-P-GZGZ3-M
ZP-P-GZGZ3-SS
ZP-P-GZGZ4-A
ZP-P-GZGZ4-M
ZP-P-GZGZ4-SS
ZP-P-GWGZ2-A
ZP-P-GWGZ2-M
ZP-P-GWGZ2-SS
ZP-P-GWGZ3-A
ZP-P-GWGZ3-M
ZP-P-GWGZ3-SS
ZP-P-GWGZ4-A
ZP-P-GWGZ4-M
ZP-P-GWGZ4-SS
ZP-P-FLK2-A
ZP-P-FLK2-M
ZP-P-FLK2-SS
ZP-P-FLK3-A
ZP-P-FLK3-M
ZP-P-FLK3-SS
ZP-P-FLK4-A
ZP-P-FLK4-M
ZP-P-FLK4-SS
ZP-P-GWK2-A
ZP-P-GWK2-M
ZP-P-GWK2-SS
ZP-P-GWK3-A
ZP-P-GWK3-M
ZP-P-GWK3-SS
ZP-P-GWK4-A
ZP-P-GWK4-M
ZP-P-GWK4-SS
size
DN 50 / 2 BSP
male
DN 80 / 3 BSP
male
DN 100 / 4 BSP
male
DN 50
DN 80
DN 100
2 BSP female
3 BSP female
4 BSP female
2 BSP male
3 BSP male
4 BSP male
2 female / 2 BSP
male
3 female / 3 BSP
male
4 female / 4 BSP
male
DN 50
DN 80
DN 100
2 female / DN 50
3 female / DN 80
3 female / DN 100
material
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
aluminium
brass
AISI 316
description
Sight glass - flange / female.

Seal: NBR (made of Viton
available).
Sight glass - 2 x flange.

available).
Sight glass - 2 x female.

available).
Sight glass - 2 x male.

available).
Sight glass - male / female.

available).
Sight glass - flange / CAMLOCK A.

available).
Sight glass - male 2 / CAMLOCK A.

available).
451

Loading arm SGA
Material:
Assembly location:
Reloading:
Length:
Bending radius:
Stainless steel (1.4301/1.4401)

Carbon steel 1.0037 RAL 5002
Galvanized carbon steel 1.0037
Wall, foot (support) or other type
Bottom or top
From 2 to 6 m
From 150 to 450 mm
Operation
A loading arm is designed to carry a flexible hose assembly and thus facilitate work of its operator. Depending
on a size the loading arm consists of several segments joined together with bolts. Slide bearings enable rotary
movement. There is a flexible hose assembly with an emergency coupling on the side of a tank truck attached to
the loading arm. In an emergency incident (a tank truck rolls away though the assembly is still connected) breaking
bolts connecting coupling halves are broken and the coupling disconnects. Simultaneously spring valves in both
coupling halves lock so the transferred medium is not released to the atmosphere. The coupling contains three
breaking pins. The loading arm protects the hose against pulling forces.
Advantages
- a hose assembly is not dragged over the ground (longer service life),
- easy handling - an operator does not lift the assembly - it is crucial when heavier assemblies DN80, DN100 are
used
- time efficiency.
Selection
In order to select a proper hose loading arm, a customer must fill in an information form (a form is supplied by one
of the TUBES INTERNATIONAL employees).
Application
The loading arms are used in industrial installations and reloading systems, to handle chemicals, fuels and gases.
The loading arms in different lengths and P-SGA version for food and pharmaceutical application are also available.
Standards
Manufactured according to the standards of the producer (Roman Seliger, Germany).
picture
DN
25
50
80
100
452
code
RS-SGA.025350.190
RS-SGA.025350.160
RS-SGA.050350.190
RS-SGA.050350.160
RS-SGA.080350.190
RS-SGA.080350.160
RS-SGA.100350.190
RS-SGA.100350.160
length
[m]
material
3,5
galvanized steel
stainless steel
galvanized steel
stainless steel
galvanized steel
stainless steel
galvanized steel
stainless steel

HAMMER LUG system
Material:
Carbon steel A105

(for types 100 400)
AISI 4130
(for types 600 2202)
Connections: NPT female thread
(butt weld version available on request)
Working press.: From 69 bar to 1378 bar
(depending on type)
The HAMMER LUG couplings, also known as WECO couplings, are designed for quick connection of flexible
hose assemblies and pipelines. Widely used in transfer applications for air, oil, water, drilling fluid, gas and other
substances. Available in a variety of options (threaded, butt weld) in diameters from 1 up to 8. Available with
DNV Type Approval. To find out more about HAMMER LUG offer, please contact Sales Department of TUBES
INTERNATIONAL.
Note: Connection of different figures is forbidden!
picture
code
description
size
characteristics
2
2
2
2
3
3
3
3
4
4
4
4
6
6
6
6
General purpose low pressure

coupling. Widely used to transfer
air, water, oil and gas.
Colour: yellow / black.
Pressure: 1000 PSI (69 bar).
Material: carbon steel.
Connection: NPT female thread.
Seal: metal / metal (cone).
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
General purpose coupling widely

used to transfer air, water, oil and
gas. Perfect for applications up to
2000 PSI.
Colour: grey/blue.
Seal: metal/metal (cone).
Fig. 100
HL-FIG0100KG-050
HL-FIG0100DG-050
HL-FIG0100MG-050
HL-FIG0100NG-050
HL-FIG0100KG-075
HL-FIG0100DG-075
HL-FIG0100MG-075
HL-FIG0100NG-075
HL-FIG0100KG-100
HL-FIG0100DG-100
HL-FIG0100MG-100
HL-FIG0100NG-100
HL-FIG0100KG-150
HL-FIG0100DG-150
HL-FIG0100MG-150
HL-FIG0100NG-150
(male, female + wing nut)

female
male
wing nut
female
male
wing nut
female
male
wing nut
female
male
wing nut
HL-FIG0200KG-025
HL-FIG0200DG-025
HL-FIG0200MG-025
HL-FIG0200NG-025
HL-FIG0200KG-050
HL-FIG0200DG-050
HL-FIG0200MG-050
HL-FIG0200NG-050
HL-FIG0200KG-075
HL-FIG0200DG-075
HL-FIG0200MG-075
HL-FIG0200NG-075
HL-FIG0200KG-100
HL-FIG0200DG-100
HL-FIG0200MG-100
HL-FIG0200NG-100

female
male
wing nut
female
male
wing nut
female
male
wing nut
female
male
wing nut
Fig. 200
453

HAMMER LUG system
table continuation:
picture
code
description
size
characteristics
2
2
2
2
4
4
4
4
6
6
6
6

used to transfer air, water, oil and
gas. Perfect for medium pressure
applications. Additional O-ring improves sealing and extends service
life.
Colour: grey/blue.
Seal: metal/metal (cone) + additional seal (NBR).
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4

used to transfer air, oil and gas.
Lip type elastomeric seal (NBR)
protects metal-to-metal seal and reduces turbulence in the line.
Colour: orange/black.
Material: AISI 4130 chromium molybdenum-plated steel.
Seal: metal/metal (cone) + additional lip type seal (NBR).
2"
2"
2"
2"
4"
4"
4"
4"
5"
5"
5"
5"
General purpose high pressure coupling. Widely used in cement tank

trucks and high pressure equipment.
Colour: blue/red.
3"
3"
3"
3"
4"
4"
4"
4"
5"
5"
5"
5"
General purpose high pressure

coupling. Widely used in cement
tank trucks and high pressure
equipment. Ensures tight sealing
and allows for misalignment of up to
7 from the centre line.
Colour: green/black.
Material: AISI 4130 steel.
Connection: butt weld (wall thickness XXH).
Seal: metal/metal (cone) + O-ring
(NBR).
Fig. 206
HL-FIG0206KG-050
HL-FIG0206DG-050
HL-FIG0206MG-050
HL-FIG0206NG-050
HL-FIG0206KG-100
HL-FIG0206DG-100
HL-FIG0206MG-100
HL-FIG0206NG-100
HL-FIG0206KG-150
HL-FIG0206DG-150
HL-FIG0206MG-150
HL-FIG0206NG-150
HL-FIG0602KG-025
HL-FIG0602DG-025
HL-FIG0602MG-025
HL-FIG0602NG-025
HL-FIG0602KG-050
HL-FIG0602DG-050
HL-FIG0602MG-050
HL-FIG0602NG-050
HL-FIG0602KG-075
HL-FIG0602DG-075
HL-FIG0602MG-075
HL-FIG0602NG-075
HL-FIG0602KG-100
HL-FIG0602DG-100
HL-FIG0602MG-100
HL-FIG0602NG-100
HL-FIG1002KG-050
HL-FIG1002DG-050
HL-FIG1002MG-050
HL-FIG1002NG-050
HL-FIG1002KG-100
HL-FIG1002DG-100
HL-FIG1002MG-100
HL-FIG1002NG-100
HL-FIG1002KG-125
HL-FIG1002DG-125
HL-FIG1002MG-125
HL-FIG1002NG-125
HL-FIG1003KW-075
HL-FIG1003DG-075
HL-FIG1003MG-075
HL-FIG1003NG-075
HL-FIG1003KW-100
HL-FIG1003DG-100
HL-FIG1003MG-100
HL-FIG1003NG-100
HL-FIG1003KW-125
HL-FIG1003DG-125
HL-FIG1003MG-125
HL-FIG1003NG-125
454

female
male
wing nut
female
male
wing nut
female
male
wing nut
Fig. 602
female
male
wing nut
female
male
wing nut
female
male
wing nut
female
male
wing nut
Fig. 1002
female
male
wing nut
female
male
wing nut
female
male
wing nut
Fig. 1003
female
male
wing nut
female
male
wing nut
female
male
wing nut

HAMMER LUG system
table continuation:
picture
code
description
size
characteristics
Fig. 1502
HL-FIG1502KG-050
HL-FIG1502DG-050
female
HL-FIG1502MG-050
male
HL-FIG1502NG-050
wing nut
HL-FIG1502KG-075
HL-FIG1502DG-075
female
HL-FIG1502MG-075
male
HL-FIG1502NG-075
wing nut
The most popular type of Hammer

Lug coupling due to its rugged construction. Widely used in standard
applications (to transfer air, water,
oil and gas) as well as in very specific ones such as choke/kill lines,
cementing lines, fracturing applications, etc.
Colour: red/blue.
Swivel unions
Swivel union with two rows of bearings (LONG RADIUS - LR version equipped with three rows of bearings). Designed to transfer
drilling fluid, water, cement, abrasives, etc. Widely used in applications associated with fracturing, cementing, flushing, choke
and kill lines. Available in 1 to 3 sizes with NPT thread or HAMMER LUG connection (male or female). Version designed
for use with hydrogen sulphide available on request. The seal not only seals the swivel union but also reduces friction of the
bearings. Additionally, heat properties of the bearings are improved to ensure longer life service. Smooth internal surface of
the union ensures minimal pressure drop. Material: AISI 4130 chromium molybdenum-plated steel.
code
size
HL-ZO-1502-S10-DM-LR-050
LR version S10 type swivel union with HL 1502 type fitting (female/male)
HL-ZO-1502-S20-DM-LR-050
HL-ZO-1502-S50-DM-LR-050
S10 type
3 swivels, 2 elbows
S50 type
2 swivels, 2 elbows
description
S20 type
1 swivel
S60 type
2 swivels, 1 elbow
S30 type
1 swivel, 1 elbow
S70 type
2 swivels, 3 elbows
S40 type
1 swivel, 2 elbows
S80 type
3 swivels, 3 elbows
455

HAMMER LUG system
Pipe unions
One-piece pipe unions (no welded parts) designed to transfer abrasive materials, drilling fluid, water, cement, etc.
Widely used in fracturing, cementing, flushing, wireline services, choke and kill lines, etc. Available as elbows, tees,
crosses in 1 to 3 sizes with NPT thread or HAMMER LUG connection (male or female). Version for hydrogen
sulphide is also available.
Working press.: 6000 PSI (414 bar) for HL fig. 602, 15000 PSI (1034 bar) for HL fig.1502.
code
size
description
HL-ZK90-1502-DD-050
90 elbow with fig. 1502 (2 x female)
HL-ZK90-1502-DM-050
90 elbow with fig. 1502 (female, male)
HL-ZK90-1502-MM-050
90 elbow with fig. 1502 (2 x male)
HL-ZK90-1502-MM-075
90 elbow with fig. 1502 (2 x male)
HL-T-1502-DDD-050
Tee with fig. 1502 (3 x female)
HL-T-1502-MMM-050
Tee with fig. 1502 (3 x male)
HL-T-1502-MDM-050
Tee with fig. 1502 (2 x male, 1 x female)
HL-ZP-0602-MD-075/0600
3"
Pup joint with fig. 602 (male, female) 3", Lc = 600 mm (2ft)
HL-ZP-0602-MD-075/1200
3"
HL-ZP-0602-MD-075/2400
3"
HL-ZP-1502-MD-050/0300
2"
HL-ZP-1502-MD-050/1200
2"
Pup joint with fig.1502 (male, female) 2", Lc = 1200 mm (4ft)
HL-ZP-1502-MD-050/2400
2"
Pup joint with fig.1502 (male, female) 2", Lc = 2400 mm (8ft)
HL-ZP-1502-MD-075/0600
HL-ZP-1502-MD-075/1200
HL-ZP-1502-MD-075/2400
ZK 90 type
90 elbow
T type
ZP type
pipe tee
C type
pup joint
pipe cross
Valves
picture
code
HL-Z-1502-MD-050
456
size
description
Valve designed for drilling fluid, water, cement, etc.

Used for fracturing, cementing, and other high
pressure applications.
Material: AISI 4130.
Working press.: 15000 PSI (1034 bar).
Connections: HL fig.1502 (male x female).

Stainless steel hygienic couplings
Female coupling (without nut) with serrated hose
tail, AISI 316, Ra (inside) 0.4 m
Male coupling with serrated hose tail, AISI 316,

Ra (inside) 0.4 m
DIN 11851
DIN 11851
code
DN
for nut
hose I.D.
[mm]
code
DN
thread
size
hose I.D.
[mm]
NH-DWK-025
NH-DWK-032
NH-DWK-038
NH-DWK-040
NH-DWK-050
NH-DWK-063
NH-DWK-065
NH-DWK-075
NH-DWK-080
NH-DWK-100
25
32
38
40
50
63
65
75
80
100
Rd 52x1/6
Rd 58x1/6
Rd 65x1/6
Rd 65x1/6
Rd 78x1/6
Rd 95x1/6
Rd 95x1/6
Rd 110x1/4
Rd 110x1/4
Rd 130x1/4
25
32
38
40
50
63
65
75
80
102
30,7
39
39,3
39,5
48,9
61
61
67
67
68,5
NH-DZK-025
NH-DZK-032
NH-DZK-038
NH-DZK-040
NH-DZK-050
NH-DZK-063
NH-DZK-065
NH-DZK-075
NH-DZK-080
NH-DZK-100
25
32
38
40
50
63
65
75
80
100
Rd 52x1/6
Rd 58x1/6
Rd 65x1/6
Rd 65x1/6
Rd 78x1/6
Rd 95x1/6
Rd 95x1/6
Rd 110x1/4
Rd 110x1/4
Rd 130x1/4
25
32
38
40
50
63
65
75
80
102
30,7
39
39,3
39,5
48,9
61
61
67
67
68,5
Female coupling (without nut) with hose tail for

RS safety clamp, AISI 316, Ra (inside) 0.4 m
Male coupling with hose tail for RS safety clamp,

AISI 316, Ra (inside) 0,4 m
DIN 11851
DIN 11851
code
DN
for nut
hose I.D.
[mm]
code
DN
thread
size
hose I.D.
[mm]
NH-DWR-015
NH-DWR-020
NH-DWR-025
NH-DWR-032
NH-DWR-038
NH-DWR-040
NH-DWR-050
NH-DWR-063
NH-DWR-065
NH-DWR-075
NH-DWR-080
NH-DWR-100
15
20
25
32
38
40
50
63
65
75
80
100
Rd 34x1/8
Rd 44x1/6
Rd 52x1/6
Rd 58x1/6
Rd 65x1/6
Rd 65x1/6
Rd 78x1/6
Rd 95x1/6
Rd 95x1/6
Rd 110x1/4
Rd 110x1/4
Rd 130x1/4
13
19
25
32
38
40
50
63
65
75
80
102
42
42
42
42
42
42
49
63
63
67
67
96
NH-DZR-015
NH-DZR-020
NH-DZR-025
NH-DZR-032
NH-DZR-038
NH-DZR-040
NH-DZR-050
NH-DZR-063
NH-DZR-065
NH-DZR-075
NH-DZR-080
NH-DZR-100
15
20
25
32
38
40
50
63
65
75
80
100
Rd 34x1/8
Rd 44x1/6
Rd 52x1/6
Rd 58x1/6
Rd 65x1/6
Rd 65x1/6
Rd 78x1/6
Rd 95x1/6
Rd 95x1/6
Rd 110x1/4
Rd 110x1/4
Rd 130x1/4
13
19
25
32
38
40
50
63
65
75
80
102
42
42
42
42
42
42
49
63
63
67
67
96
457

Female coupling (without nut) with butt weld
connection, AISI 316, Ra (inside) 0.8 m
Male coupling with butt weld connection, AISI

316, Ra (inside) 0.8 m
DIN 11851
DIN 11851
code
DN
for nut
NH-DWS-010
NH-DWS-015
NH-DWS-020
NH-DWS-025
NH-DWS-032
NH-DWS-040
NH-DWS-050
NH-DWS-065
NH-DWS-080
NH-DWS-100
NH-DWS-125
NH-DWS-150
10
15
20
25
32
40
50
65
80
100
125
150
Rd 28x1/8
Rd 34x1/8
Rd 44x1/6
Rd 52x1/6
Rd 58x1/6
Rd 65x1/6
Rd 78x1/6
Rd 95x1/6
Rd 110x1/4
Rd 130x1/4
Rd 160x1/4
Rd 190x1/4
butt weld
O.D. / I.D.
[mm]
13 / 10
19 / 16
23 / 20
29 / 26
35 / 32
41 / 38
53 / 50
70 / 66
85 / 81
104 / 100
129 / 125
154 / 150
Nut, AISI 304
code
DN
thread
size
NH-DZS-010
NH-DZS-015
NH-DZS-020
NH-DZS-025
NH-DZS-032
NH-DZS-040
NH-DZS-050
NH-DZS-065
NH-DZS-080
NH-DZS-100
NH-DZS-125
NH-DZS-150
10
15
20
25
32
40
50
65
80
100
125
150
Rd 28x1/8
Rd 34x1/8
Rd 44x1/6
Rd 52x1/6
Rd 58x1/6
Rd 65x1/6
Rd 78x1/6
Rd 95x1/6
Rd 110x1/4
Rd 130x1/4
Rd 160x1/4
Rd 190x1/4
Seal
DIN 11851
458
butt weld
O.D. / I.D.
[mm]
13 / 10
19 / 16
23 / 20
29 / 26
35 / 32
41 / 38
53 / 50
70 / 66
85 / 81
104 / 100
129 / 125
154 / 150
DIN 11851
code
DN
thread
size
DN
NH-DN-010
NH-DN-015
NH-DN-020
NH-DN-025
NH-DN-032
NH-DN-040
NH-DN-050
NH-DN-065
NH-DN-080
NH-DN-100
NH-DN-125
NH-DN-150
10
15
20
25
32
40
50
65
80
100
125
150
Rd 28x1/8
Rd 34x1/8
Rd 44x1/6
Rd 52x1/6
Rd 58x1/6
Rd 65x1/6
Rd 78x1/6
Rd 95x1/6
Rd 110x1/4
Rd 130x1/4
Rd 160x1/4
Rd 190x1/4
10
15
20
25
32
40
50
65
80
100
125
150
code
(silicone)
code
(Viton)
code
(EPDM)
code
(NBR)
NH-DUS-010 NH-DUV-010 NH-DUE-010 NH-DUN-010


Female coupling (without nut) with serrated hose
tail, AISI 316, Ra (inside) 0.4 m
Male coupling with serrated hose tail, AISI 316,

Ra (inside) 0.4 m
SMS
SMS
code
DN
for nut
hose I.D.
[mm]
code
DN
thread
size
NH-SWK-025
NH-SWK-032
NH-SWK-038
NH-SWK-050
NH-SWK-063
NH-SWK-075
NH-SWK-100
25
32
38
50
63
75
100
Rd 40x1/6
Rd 48x1/6
Rd 60x1/6
Rd 70x1/6
Rd 85x1/6
Rd 98x1/6
Rd 132x1/6
25
32
38
50
63
75
102
30,7
39
39,3
48,9
61
67
68,5
NH-SZK-025
NH-SZK-032
NH-SZK-038
NH-SZK-050
NH-SZK-063
NH-SZK-075
NH-SZK-100
25
32
38
50
63
75
100
Rd 40x1/6
Rd 48x1/6
Rd 60x1/6
Rd 70x1/6
Rd 85x1/6
Rd 98x1/6
Rd 132x1/6
hose
I.D.
[mm]
25
32
38
50
63
75
102
L
30,7
39
39,3
48,9
61
67
68,5
Female coupling (without nut) with hose tail for

RS safety clamp, AISI 316, Ra (inside) 0.4 m
Male coupling with hose tail for RS safety clamp,

AISI 316, Ra (inside) 0.4 m
SMS
SMS
code
DN
for nut
hose I.D.
[mm]
code
DN
thread
size
hose I.D.
[mm]
NH-SWR-025
NH-SWR-032
NH-SWR-038
NH-SWR-050
NH-SWR-063
NH-SWR-075
NH-SWR-100
25
32
38
50
63
75
100
Rd 40x1/6
Rd 48x1/6
Rd 60x1/6
Rd 70x1/6
Rd 85x1/6
Rd 98x1/6
Rd 132x1/6
25
32
38
51
63
75
102
42
42
42
49
63
67
96
NH-SZR-025
NH-SZR-032
NH-SZR-038
NH-SZR-050
NH-SZR-063
NH-SZR-075
NH-SZR-100
25
32
38
50
63
75
100
Rd 40x1/6
Rd 48x1/6
Rd 60x1/6
Rd 70x1/6
Rd 85x1/6
Rd 98x1/6
Rd 132x1/6
25
32
38
51
63
75
102
42
42
42
49
63
67
96
Female coupling with butt welde connection, AISI

Male coupling with butt weld connection, AISI

SMS
SMS
code
DN
for nut
NH-SWS-025
NH-SWS-032
NH-SWS-038
NH-SWS-050
NH-SWS-063
NH-SWS-075
NH-SWS-100
25
32
38
50
63
75
100
Rd 40x1/6
Rd 48x1/6
Rd 60x1/6
Rd 70x1/6
Rd 85x1/6
Rd 98x1/6
Rd 132x1/6
butt weld
O.D. / I.D.
[mm]
25,6 / 22,6
32 / 29,5
38 / 35,5
51 / 48,5
63,5 / 60,5
76 / 72
101,6 / 97,6
code
DN
thread
size
NH-SZS-025
NH-SZS-032
NH-SZS-038
NH-SZS-050
NH-SZS-063
NH-SZS-080
NH-SZS-100
25
32
38
50
63
75
100
Rd 40x1/6
Rd 48x1/6
Rd 60x1/6
Rd 70x1/6
Rd 85x1/6
Rd 98x1/6
Rd 132x1/6
butt weld
O.D. / I.D.
[mm]
25 / 22,5
32 / 29,5
38 / 35,5
51 / 48,5
63,5 / 60,5
76 / 72
101,6 / 97,6
459

Nut, AISI 304
Seal
SMS
SMS
code
DN
thread
size
DN
code
(PTFE)
code
(Viton)
code
(EPDM)
code
(NBR)
NH-SN-025
NH-SN-032
NH-SN-038
NH-SN-050
NH-SN-063
NH-SN-075
NH-SN-100
25
32
38
50
63
75
100
Rd 40x1/6
Rd 48x1/6
Rd 60x1/6
Rd 70x1/6
Rd 85x1/6
Rd 98x1/6
Rd 132x1/6
25
32
40
50
65
80
100
NH-SUP-025
NH-SUP-032
NH-SUP-038
NH-SUP-050
NH-SUP-063
NH-SUP-075
NH-SUP-100
NH-SUV-025
NH-SUV-032
NH-SUV-038
NH-SUV-050
NH-SUV-063
NH-SUV-075
NH-SUV-100
NH-SUE-025
NH-SUE-032
NH-SUE-038
NH-SUE-050
NH-SUE-063
NH-SUE-075
NH-SUE-100
NH-SUN-025
NH-SUN-032
NH-SUN-038
NH-SUN-050
NH-SUN-063
NH-SUN-075
NH-SUN-100
Liner according to BS 4825-5 with butt weld

connection, AISI 316
Male coupling according to BS 4825-5 with butt

weld connection, AISI 316
RJT
RJT
code
DN
for nut
NH-RWS-025
NH-RWS-040
NH-RWS-050
NH-RWS-065
NH-RWS-075
NH-RWS-100
25
40
50
65
75
100
1 RJT
1.1/2 RJT
2 RJT
2.1/2 RJT
3 RJT
4 RJT
butt weld
O.D. / I.D.
[mm]
25,4 / 22,2
38,1 / 34,9
50,8 / 47,6
63,5 / 60,3
76,2 / 73,0
101,6 / 97,6
Nut according to BS 4825-5
code
DN
thread
size
NH-RZS-025
NH-RZS-040
NH-RZS-050
NH-RZS-065
NH-RZS-075
NH-RZS-100
25
40
50
65
75
100
1 RJT
1.1/2 RJT
2 RJT
2.1/2 RJT
3 RJT
4 RJT
butt weld
O.D. / I.D.
[mm]
25,4 / 22,2
38,1 / 34,9
50,8 / 47,6
63,5 / 60,3
76,2 / 73,0
101,6 / 97,6
Seal according to BS 4825-5
RJT
RJT
code
DN
thread
size
DN
code
(NBR)
code
(EPDM)
NH-RN-025
NH-RN-040
NH-RN-050
NH-RN-065
NH-RN-075
NH-RN-100
25
40
50
65
75
100
1 RJT
1.1/2 RJT
2 RJT
2.1/2 RJT
3 RJT
4 RJT
25
40
50
65
75
100
NH-RUN-025
NH-RUN-040
NH-RUN-050
NH-RUN-063
NH-RUN-075
NH-RUN-100
NH-RUE-025
NH-RUE-040
NH-RUE-050
NH-RUE-063
NH-RUE-075
NH-RUE-100
Seals made of PTFE, silicone, Viton also available.
460

Seal (DIN 32676)
TRICLOVER
DN
A
[mm]
B
[mm]
code
(PTFE)
code
(Viton)
code
(EPDM)
code
(NBR)
code
(silicone)
10
15
20
25
32
38
50
34
34
34
50,5
50,5
50,5
64
10,2
16,2
20,2
26,2
32,2
38,2
50,2
NH-TUP-034-010
NH-TUP-034-015
NH-TUP-034-020
NH-TUP-050-025
NH-TUP-050-032
NH-TUP-050-038
NH-TUP-064-050
NH-TUV-034-010
NH-TUV-034-015
NH-TUV-034-020
NH-TUV-050-025
NH-TUV-050-032
NH-TUV-050-038
NH-TUV-064-050
NH-TUE-034-010
NH-TUE-034-015
NH-TUE-034-020
NH-TUE-050-025
NH-TUE-050-032
NH-TUE-050-038
NH-TUE-064-050
NH-TUN-034-010
NH-TUN-034-015
NH-TUN-034-020
NH-TUN-050-025
NH-TUN-050-032
NH-TUN-050-038
NH-TUN-064-050
NH-TUS-034-010
NH-TUS-034-015
NH-TUS-034-020
NH-TUS-050-025
NH-TUS-050-032
NH-TUS-050-038
NH-TUS-064-050
TC coupling according to ISO 2852 with serrated

hose tail, AISI 316, Ra (inside) 0.4 m
TC coupling according to ISO 2852 with hose tail

for RS safety clamp, AISI 316, Ra (inside) 0.4 m
TRICLOVER
TRICLOVER
code
DN
D
d
[mm] [mm]
NH-TKK-034-013
NH-TKK-050-013
NH-TKK-034-020
NH-TKK-050-020
NH-TKK-050-025
NH-TKK-050-032
NH-TKK-050-038
NH-TKK-064-038
NH-TKK-064-050
13
13
20
20
25
32
38
38
50
34
50,5
34
50,5
50,5
50,5
50,5
64
64
12,7
31,3
21
33,7
23,5
33,7
34,3
40
48,6
hose I.D.
[mm]
code
DN
D
d
[mm] [mm]
13
13
20
20
25
32
38
38
50
24,3
24,3
30,2
30,2
29,9
39
39,5
39,5
48,6
NH-TKR-034-013
NH-TKR-050-013
NH-TKR-034-020
NH-TKR-050-020
NH-TKR-050-025
NH-TKR-050-032
NH-TKR-050-038
NH-TKR-064-038
NH-TKR-064-050
13
13
20
20
25
32
38
38
50
34
50,5
34
50,5
50,5
50,5
50,5
64
64
TC coupling according to DIN 32676 with butt

weld connection, AISI 316
DN
flange O.D.
[mm]
NH-TKS-034-010
NH-TKS-034-015
NH-TKS-034-020
NH-TKS-050-025
NH-TKS-050-032
NH-TKS-050-038
NH-TKS-064-050
10
15
20
25
32
38
50
34
34
34
50,5
50,5
50,5
64
butt weld
O.D. / I.D.
[mm]
13 / 10
19 / 16
23 / 20
29 / 26
35 / 32
41 / 38
53 / 50
13
13
20
20
25
32
38
38
50
42
42
42
42
42
42
42
42
49
Clamp according to ISO 2852, AISI 304
TRICLOVER
code
12,7
31,3
21
33,7
23,5
33,7
34,3
40
48,6
hose I.D.
[mm]
TRICLOVER
code
flange O.D.
[mm]
NH-TO-034
NH-TO-050
NH-TO-064
34
50,5
64
461

GT swivel joints
GT swivel joints are designed for fixed installations or flexible hose assembly connections, where rotary movements
or oscillations between certain installation parts take place. While choosing a swivel joint one has to take into
consideration medium, working pressure, temperature, frequency of rotation (r.p.m.) or oscillations, number of
ports in multiconnection joints. For proper selection, please contact Sales or Technical Department of TUBES
INTERNATIONAL.
series
water
air
vacuum
steam
hot oil
hydraulic oil
pressure [bar]
400
4200
25
1000
25
1000-2
25
BR
25
1800 SR
1800 SRDE
350
1200 SR/SR2
1400 SR
700
350
MC MC R2
MC RVR
400
BATR
BATR VR
400
12
12
1600
1600 B
200
3S
10
800 SR3
900 SR3
20
800 SR4
900 SR4
50
800 SR5
50
600-700
(EX 3S)
250
462

GT swivel joints
1000
Material:
Seal:
Working temp.:
Thread:
Rotation:
nickel-plated steel
Nickel-plated steel, AISI 316L

PTFE
Up to +200C
BSP female thread, BSP male thread
Slow, swivelling
AISI 316L
code
thread size
[inch]
working pressure
[bar]
code
thread size
[inch]
working pressure
[bar]
GT-1013-K
GT-1017-K
GT-1021-K
GT-1027-K
GT-1034-K
GT-1042-K
GT-1049-K
GT-1060-K
GT-1076-K
GT-1090-K
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
50
50
50
50
30
30
30
20
20
20
GT-1013-I
GT-1017-I
GT-1021-I
GT-1027-I
GT-1034-I
GT-1042-I
GT-1049-I
GT-1060-I
GT-1076-I
GT-1090-I
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
20
20
20
20
15
15
15
10
10
10
1200 SR
Material:
Seal:
Working temp.:
Thread:
Rotation:
nickel-plated steel
Steel, nickel-plated steel, AISI 316L

NBR, Viton, PTFE
Up to +150C (+120C for AISI 316L)
BSP female thread, BSPT male thread
Slow, swivelling
AISI 316L
code
thread size
[inch]
working pressure
[bar]
code
thread size
[inch]
working pressure
[bar]
GT-1213-SRK
GT-1217-SRK
GT-1221-SRK
GT-1227-SRK
GT-1234-SRK
GT-1242-SRK
GT-1249-SRK
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
350
350
300
300
250
250
200
GT-1213-SRI
GT-1217-SRI
GT-1221-SRI
GT-1227-SRI
GT-1234-SRI
GT-1242-SRI
GT-1249-SRI
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
175
175
150
150
125
125
100
463

GT swivel joints
1800 SR
Material:
Seal:
Working temp.:
Thread:
Rotation:
nickel-plated steel

NBR, Viton, PTFE
BSP female thread, BSPT male thread
Slow, swivelling
AISI 316L
code
thread size
[inch]
working pressure
[bar]
code
thread size
[inch]
working pressure
[bar]
GT-1813-SRK
GT-1817-SRK
GT-1821-SRK
GT-1827-SRK
GT-1834-SRK
GT-1842-SRK
GT-1849-SRK
GT-1860-SRK
GT-1876-SRK
GT-1890-SRK
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
350
350
300
300
250
250
200
200
150
150
GT-1813-SRI
GT-1817-SRI
GT-1821-SRI
GT-1827-SRI
GT-1834-SRI
GT-1842-SRI
GT-1849-SRI
GT-1860-SRI
GT-1876-SRI
GT-1890-SRI
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
175
175
150
150
125
125
100
100
75
75
BR
Material:
Seal:
Working temp.:
Pressure:
Connections:
Rotation:
carbon steel

PTFE
Up to 20 bar (depends on diameter)
Flange
Slow, swivelling
nickel-plated steel
AISI 316L
code
size
[inch]
flange
code
size
[inch]
flange
code
size
[inch]
flange
GT-BR050
GT-BR066
GT-BR080
GT-BR100
GT-BR125
GT-BR150
GT-BR175
GT-BR200
GT-BR250
GT-BR300
2
2.1/2
3
4
5
6
7
8
10
12
PN 16
PN 16
PN 16
PN 16
PN 16
PN 16
PN 10
PN 10
PN 10
PN 10
GT-BR050-K
GT-BR066-K
GT-BR080-K
GT-BR100-K
GT-BR125-K
GT-BR150-K
GT-BR175-K
GT-BR200-K
GT-BR250-K
GT-BR300-K
2
2.1/2
3
4
5
6
7
8
10
12
PN 16
PN 16
PN 16
PN 16
PN 16
PN 16
PN 10
PN 10
PN 10
PN 10
GT-BR050-I
GT-BR066-I
GT-BR080-I
GT-BR100-I
GT-BR125-I
GT-BR150-I
GT-BR175-I
GT-BR200-I
GT-BR250-I
GT-BR300-I
2
2.1/2
3
4
5
6
7
8
10
12
PN 16
PN 16
PN 16
PN 16
PN 16
PN 16
PN 10
PN 10
PN 10
PN 10
464

Swivel joints - T type
Material:
Seal:
Connections:
Working press.:
Carbon steel 42CrMo4, or AISI 316Ti

NBR, PU, PTFE
BSP, BSPT, NPT female
Up to 420 bar - carbon steel
Up to 100 bar - AISI316Ti
Rotation:
Up to 80 r.p.m.
T type swivel joint designed to connect pipelines, installations and hose assemblies, in which swivelling or oscillatory
movements between parts occur. Used in chemical, petrochemical, papermaking industry, etc. T type swivel joints
are available from 1/4 to 2. Three versions: straight (10 type), angle type (11 type), and double angle type (type
12). During selection process, consider: medium, working pressure, frequency of rotation and oscillatory speed.
Please contact Sales or Technical Department of TUBES INTERNATIONAL for proper selection.
1 - immovable part
2 - swivelling part
5 - stabilizing ring
6 - scraper ring
10 - main seal
11 - seal
12 - blank cap
13 - blank cap
15 - balls
16 - lubricator
10 type
466
11 type
12 type

Claw couplings
PN 10 bar, lug distance 42 mm, zinc-plated cast iron

code
hose
I.D.
[mm]
lug
distance
[mm]
description
MU-701
MU-702
MU-703
MU-704
MU-705
MU-706
MU-707
MU-708
6
8
10
13
15
19
25
32
42
42
42
42
42
42
42
42
Coupling according to DIN 3483 /3489

with hose tail.
Material: zinc-plated cast iron.
Seal: oil-resistant rubber.
code
hose
I.D.
[mm]
lug
distance
[mm]
description
MU-801
13
42
MU-802
15
42
MU-803
19
42
MU-804
25
42
code
thread
size
[inch]
lug
distance
[mm]
description
MU-901
MU-902
MU-903
MU-904
MU-905
MU-906
MU-907
1/4
3/8
1/2
3/4
1
Rd 32x1/8
1.1/4
42
42
42
42
42
42
42
Coupling according to DIN 3482/3489

and female thread.
code
thread
size
[inch]
lug
distance
[mm]
description
MU-1001
1/4
42
MU-1002
3/8
42
MU-1003
1/2
42
MU-1004
3/4
42
MU-1005
42
MU-1006
1.1/4
42
code
version
lug
distance
[mm]
MU-1101
without
chain
42
MU-1102
with
chain
42
Coupling with hose tail and retaining collar.

Coupling according to DIN 3481/3489

and male taper thread.
description
Blank cap according to DIN 3484/3489.

467

Claw couplings
code
hose
I.D.
[mm]
lug
distance
[mm]
MU-864
13
42
MU-866
19
42
MU-867
25
42
code
thread
size
[inch]
lug
distance
[mm]
MU-963
1/2
42
MU-964
3/4
42
MU-965
42
code
thread
size
[inch]
lug
distance
[mm]
MU-1063
1/2
42
MU-1064
3/4
42
MU-1065
42
code
thread
size
[inch]
version
MU-1150
3/4
MU-1151
3/4
3 x MU-1004
MU-1171
3/4
3 x MU-1054
MU-1160
MU-1161
3 x MU-1005
MU-1181
3 x MU-1055
code
468
description
Coupling with hose tail, retaining collar

and holes for retaining pins.
description
Coupling with female thread and holes

for retaining pins.
description
Coupling with male taper thread and

holes for retaining pins.
description
Tee with female thread (with or without

claw couplings).
description
MU-1601
Oil-resistant rubber gasket. (NBR), temp. from -20C up to +100C.
MU-1607
Steam-resistant gasket (silicone), temp. from -50C up to +140C
MU-1609
Retaining pin.

Claw couplings
code
hose
I.D.
[mm]
lug
distance
[mm]
MU-753
10
42
MU-754
13
42
MU-755
15
42
MU-756
19
42
MU-757
25
42
code
thread
size
[inch]
lug
distance
[mm]
MU-953
1/2
42
MU-954
3/4
42
MU-955
42
MU-956
Rd 32x1/8
42
code
thread
size
[inch]
lug
distance
[mm]
MU-1053
1/2
42
MU-1054
3/4
42
MU-1055
42
code
description

Seal: brass with oil-resistant rubber ring.
description
Coupling with female thread.

description
Coupling with male taper thread.

description
MU-1604
Oil-resistant rubber ring (NBR).
MU-1603
Brass gasket.
MU-1605
Retaining screw M5x13.
469

Claw couplings
code
470
code
hose
I.D.
[mm]
lug
distance
[mm]
MU-1753
10
42
MU-1754
13
42
MU-1755
15
42
MU-1756
19
42
MU-1757
25
42
code
hose
I.D.
[mm]
lug
distance
[mm]
description
description
Coupling according to DIN 3238 with retaining ring and hose tail.
MU-10077
19
42
Coupling with retaining ring (for crimping).

code
thread
size
[inch]
lug
distance
[mm]
description
MU-1762
3/8
42
MU-1763
1/2
42
MU-1764
3/4
42
MU-1765
42
code
thread
size
[inch]
lug
distance
[mm]
MU-1772
3/8
42
MU-1773
1/2
42
MU-1774
3/4
42
MU-1775
42
nazwa
Coupling according to DIN 3238, with

retaining ring and female thread.
description
Coupling according to DIN 3238, retaining ring and male taper thread.
O.D.
[mm]
height
[mm]
MU-1606
oil-resistant rubber gasket
33
MU-1610*
oil-resistant rubber gasket
30
MU-1616
steam-resistant gasket
33
MU-1611*
steam-resistant gasket
30
description
Spare parts to couplings according to

DIN 3238.
* according to new
standard

Claw couplings
PN 10 bar, lug distance 42 mm, brass
code
hose
I.D.
[mm]
lug
distance
[mm]
MU-1203
10
42
MU-1204
13
42
MU-1205
15
42
MU-1206
19
42
MU-1207
25
42
code
thread
size
[inch]
lug
distance
[mm]
MU-1223
3/8
42
MU-1224
1/2
42
MU-1226
3/4
42
MU-1227
42
code
thread
size
[inch]
lug
distance
[mm]
MU-1213
3/8
42
MU-1214
1/2
42
MU-1216
3/4
42
MU-1217
42
code
MU-1231
code
description
Coupling with hose tail and retaining collar.

Material: brass.
description

Material: brass.
description
Coupling with male thread.

Material: brass.
lug distance
[mm]
42
description
Blank cap.
Material: brass.
description
MU-1601
Oil-resistant rubber gasket (NBR),

temp. from -20C up to +100C.
MU-1607
Steam-resistant silicone gasket (silicone),

471

Claw couplings
PN 16 bar, lug distance 42 mm, AISI 316

code
hose
I.D.
[mm]
lug
distance
[mm]
MU-600
10
42
MU-601
13
42
MU-602
19
42
MU-603
25
42
code
thread
size
[inch]
lug
distance
[mm]
MU-610
3/8
42
MU-611
1/2
42
MU-612
3/4
42
MU-613
42
code
thread
size
[inch]
lug
distance
[mm]
MU-621
1/2
42
MU-622
3/4
42
MU-623
42
code
version
lug
distance
[mm]
MU-638
without
chain
42
MU-639
with
chain
42
code
MU-699
MU-698
MU-110200
472
description
Coupling according to DIN 3489 with

hose tail.
Material: AISI 316.
Seal: Viton (EPDM is optional).
Working temp.: -30C up to +200C.
description
Coupling according to DIN 3489 with female thread.

Material: AISI 316.
description
Coupling according to DIN 3489 with

male thread.
Material: AISI 316.
description
Blank cap according to DIN 3489.

Material: AISI 316.
description
Viton seal (petrochemical industry).
Working temp.: from -40C up to +130C.
EPDM seal (food industry).
Safety chain for blank cap.

Claw couplings
code
hose
I.D.
[mm]
lug
distance
[mm]
MU-5003
MU-5004
MU-5005
MU-5006
MU-5007
MU-5008
MU-5009
10
13
16
19
25
32
38
40
40
40
40
40
40
40
code
thread
size
[inch]
lug
distance
[mm]
MU-5101
MU-5102
MU-5103
MU-5105
MU-5107
MU-5108
MU-5109
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
40
40
40
40
40
40
40
code
thread
size
[inch]
lug
distance
[mm]
MU-5201
MU-5202
MU-5203
MU-5204
MU-5205
MU-5206
MU-5207
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
40
40
40
40
40
40
40
code
lug distance
[mm]
MU-5300
description

Material: brass.
Seal: NBR.
description

Material: brass.
Seal: NBR.
description

Material: brass.
Seal: NBR.
description
Blank cap.
Material: brass.
Seal: NBR.
40
code
hose
I.D.
[mm]
lug
distance
[mm]
MU-5304
13
40
MU-5306
19
40
MU-5307
25
40
MU-5308
32
40
description
Coupling with hose tail and retaining

ring.
Material: brass.
Seal: NBR.
473

Claw couplings
code
hose
I.D.
[mm]
lug
distance
[mm]
MU-5364
13
40
MU-5366
19
40
MU-5367
25
40
360 axial swivelling coupling with hose

tail.
Material: brass.
Seal: NBR.
code
lug
distance
[mm]
version
description
MU-5208
40
with
couplings
MU-5209
without
couplings
code
MU-5315
MU-5316
474
MU-5310
MU-5311
name
description
Tee with 3/4 thread (1x female thread

2x male thread).
Material: brass.
description
MU-1608
NBR seal
For MU-5003 - 5367 couplings.
MU-1613
NBR seal
For MU-5304 - 5308 couplings.
code
size
[inch]
lug
distance
[mm]
MU-5320
1/2
40
MU-5321
3/4
40
MU-5322
40
code
hose I.D.
[mm]
MU-5310
13
MU-5311
19
MU-5315
13
MU-5316
19
description
Adjustable hose nozzle with claw connection.

Material: brass.
Seal: NBR.
description
Adjustable hose nozzle

(with flow shut-off).
Adjustable hose nozzle.

Claw couplings
PN 16 bar, lug distance 40 mm, AISI 316
code
hose
I.D.
[mm]
lug
distance
[mm]
MU-6004
13
40
MU-6006
19
40
MU-6007
25
40
code
thread
size
[inch]
lug
distance
[mm]
MU-6103
1/2
40
MU-6105
3/4
40
MU-6107
40
code
thread
size
[inch]
lug
distance
[mm]
MU-6203
1/2
40
MU-6204
3/4
40
MU-6205
40
code
MU-6300
code
MU-6399
description

Material: AISI 316.
Seal: Viton.
description

Material: AISI 316.
Seal: Viton.
description

Material: AISI 316.
Seal: Viton.
lug distance
[mm]
40
description
Blank cap.
Material: AISI 316.
Seal: Viton.
description
Viton gasket.
475

Claw couplings
PN 10 bar, distance between lugs 41 mm, zinc-plated cast iron (US standard)
code
hose
I.D.
[mm]
lug
distance
[mm]
MU-1700
10
41
MU-1701
13
41
MU-1702
19
41
MU-1703
25
41
code
thread
size
[inch]
lug
distance
[mm]
MU-1720
3/8 NPT
41
MU-1721
1/2 NPT
41
MU-1722
3/4 NPT
41
MU-1723
1 NPT
41
code
thread
size
[inch]
lug
distance
[mm]
MU-1710
3/8 NPT
41
MU-1711
1/2 NPT
41
MU-1712
3/4 NPT
41
MU-1713
1 NPT
41
code
476
description
Coupling with hose tail, retaining collar

and retaining pin holes.
description
Coupling with female thread and retaining pin holes.

description
Coupling with male thread and retaining

pin holes
name
MU-1601
Oil-resistant rubber seal (NBR),

MU-1607
Steam rubber seal (silicone),

MU-1609
Retaining pin.
description
Spare parts for couplings.

Sandblast couplings
code
hose
I.D.
[mm]
hose wall
thickness
[mm]
MU-3101
25
MU-3102
32
MU-3103
38
40
10
42
MU-3104
code
thread size
[mm]
MU-3111
1.1/4
MU-3112
coarse thread
MU-3114
description
Sandblast coupling with hose

tail.
Material: zinc-plated cast
iron.
Seal: NBR.
description
Sandblast coupling with female thread.

Seal: NBR.
code
coarse
thread
size
hose
I.D.
[mm]
hose wall
thickness
[mm]
MU-3121
1.1/4
25
MU-3122
1.1/4
32
code
coarse
thread
size
hose
I.D.
[mm]
hose wall
thickness
[mm]
MU-3131
50 mm
25
MU-3132
50 mm
32
code
description
Nozzle holder with female

thread and hose tail.
description

description
MU-3161
NBR seal.
MU-3163
Holding screw DIN 7972 4.8x16 mm.
MU-1609
Retaining pin DIN 11024.
477

Sandblast couplings
code
hose
I.D.
[mm]
hose wall
thickness
[mm]
MU-3180
19
MU-3181
25
MU-3182
32
MU-3183
38
40
10
42
MU-3184
code
thread size
MU-3113
1.1/4
MU-3138
coarse thread 50 mm
478
Sandblast coupling
hose tail.
Material: Nylon.
Seal: NBR.
with
description
Sandblast coupling with female thread.

Material: Nylon.
Seal: NBR.
code
thread
size
[inch]
hose
I.D.
[mm]
hose wall
thickness
[mm]
MU-3123
3/4
13
7,5
MU-3124
1.1/4
19
MU-3125
1.1/4
25
MU-3126
1.1/4
32
MU-3127
1.1/4
38
code
coarse
thread
size
hose
I.D.
[mm]
hose wall
thickness
[mm]
MU-3133
50 mm
13
7,5
MU-3134
50 mm
19
MU-3135
50 mm
25
MU-3136
50 mm
32
MU-3137
50 mm
38
code
description
description

Material: Nylon.
description

Material: Nylon.
description
MU-3166
NBR seal for MU-3180 coupling.
MU-3164
NBR seal for MU-3181 coupling.
MU-3165
NBR seal for MU-3182 to 3184, 3113, 3138 couplings.
MU-3163
Holding screw DIN 7972 4.8x16 mm.

Mortar couplings
code
hose I.D.
[mm]
A
[mm]
D
[mm]
MU-2921-2*
MU-2951-2*
MU-2961-2
MU-2901-1
MU-2947-1
MU-2901-2
MU-2947-2
MU-2945-1
MU-2911-1
MU-2945-2
MU-2911-2
25
25
25
35
42
35
42
42
50
42
50
22
22
22
23,5
23,5
22
22
23,5
23,5
22
22
35,5
42
42
51
51
51
51
64
64
64
64
code
hose I.D.
[mm]
A
[mm]
D
[mm]
MU-2951-4*
25
22
42
MU-2961-4
25
22
42
MU-2901-3
35
23,5
51
MU-2901-4
35
22
51
MU-2911-3
50
23,5
64
MU-2911-4
50
22
64
A
[mm]
D
[mm]
22
22
22
23,5
23,5
23,5
22
22
22
23,5
22
35,5
42
42
51
51
51
51
51
51
64
64
code
MU-2923-2*
MU-2953-2*
MU-2963-2
MU-2903-1
MU-2906-1
MU-2927-1
MU-2903-2
MU-2906-2
MU-2927-2
MU-2913-1
MU-2913-2
thread
size
[inch]
1
1
1
1
1.1/4
1.1/2
1
1.1/4
1.1/2
2
2
code
thread
size
[inch]
A
[mm]
D
[mm]
MU-2916-1
2.1/2
23,5
64
MU-2916-2
2.1/2
22
64
description
Mortar coupling with hose tail

(for clamp assembly).
Material: zinc-plated cast iron
(steel).
* - with one handle
description
Mortar coupling with hose tail
(for crimping).
(steel).
* - with one handle
description
Mortar coupling with female

thread.
(steel).
* - with one handle
description
Mortar coupling with male

thread.
(steel).
479

Mortar couplings
code
hose I.D.
[mm]
A
[mm]
D
[mm]
MU-2922-2
MU-2952-2
MU-2964-2*
MU-2908-1
MU-2902-1
MU-2948-1
MU-2908-2
MU-2902-2
MU-2948-2
MU-2905-1
MU-2946-1
MU-2912-1
MU-2905-2
MU-2946-2
MU-2912-2
25
25
25
25
35
42
25
35
42
35
42
50
35
42
50
22
22
22
23,5
23,5
23,5
22
22
22
23,5
23,5
23,5
22
22
22
35
41
41
49,5
49,5
49,5
49,5
49,5
49,5
63
63
63
63
63
63
code
hose I.D.
[mm]
A
[mm]
D
[mm]
MU-2952-4
MU-2962-4*
MU-2908-3
MU-2902-3
MU-2908-4
MU-2902-4
MU-2905-3
MU-2912-3
MU-2905-4
MU-2912-4
25
25
25
35
25
35
35
50
35
50
22
22
23,5
23,5
22
22
23,5
23,5
22
22
41
41
49,5
49,5
49,5
49,5
63
63
63
63
A
[mm]
D
[mm]
description
22
22
22
23,5
23,5
23,5
22
22
22
23,5
23,5
22
22
35
41
41
49,5
49,5
49,5
49,5
49,5
49,5
63
63
63
63
Mortar adaptor with female

thread.
(steel).
code
MU-2924-2
MU-2954-2
MU-2955-2
MU-2904-1
MU-2925-1
MU-2928-1
MU-2904-2
MU-2925-2
MU-2928-2
MU-2914-1
MU-2917-1
MU-2914-2
MU-2917-2
480
thread
size
[inch]
1
1
1.1/4
1
1.1/4
1.1/2
1
1.1/4
1.1/2
2
2.1/2
2
2.1/2
description
Mortar adaptor with hose tail

(for clamp assembly).
(steel).
* - swivelling plug
description
Mortar adaptor with hose tail

(for crimping).
(steel).
* - swivelling plug
code
A1
[mm]
D1
[mm]
A2
[mm]
D2
[mm]
description
MU-2990-2
MU-2991-2
MU-2991-1
MU-2992-2
MU-2992-1
MU-2993-2
MU-2993-1
MU-2994-2
MU-2994-1
22
22
23,5
22
23,5
22
23,5
22
23,5
41
49,5
49,5
49,5
49,5
63
63
63
63
22
22
22
22
22
22
22
22
23,5
35
35
35
41
41
41
41
49,5
49,5
Male adaptor on both

ends.
Material:
zinc-plated
cast iron (steel).

Mortar couplings
code
thread
size
[inch]
A
[mm]
D
[mm]
description
MU-2965-2
42
22
Mortar coupling with female thread.

Material: Nylon (PA6).
MU-2970-2
thread
size
[inch]
1
hose
I.D.
[mm]
25
MU-2970-4*
25
MU-2971-1
1.1/2
35
MU-2973-1
1.1/2
42
MU-2972-1
50
MU-2974-1
42
code
hose
size
[mm]
sleeve
I.D.
[mm]
sleeve
O.D.
[mm]
MU-2980-3
25x7
41
50
MU-2981-3
35x7
49
58
MU-2982-3
50x9
68,5
75
code
size
[mm]
MU-2931
Mullenbach handle
MU-2937
neutral handle
MU-2932
6x30
pin
MU-2933
6x40
pin
code
description
Hose tail with male thread.

Material: zinc-plated steel.
* - for crimping
name
code
description
Ferrule for crimping.

description
Spare parts.
description
MU-2930
36x24,5x6 seal
MU-2936
42x28x6 seal
MU-2934
53x38x6 seal
MU-2935
60x50x6 seal
481
INDUSTRIAL FITTINGS - fittings, connectors
Fuel fittings - S type

Material:
Seal:
Working press.:
Vacuum:
Working temp.:
Brass (stainless steel version also available)

PU (polyurethane) - S1 type
Up to 16 bar
Up to -0,8 bar
Characteristics: Petrol, screw-to-connect hose couplings complying with EN 14424 standard, designed for
rubber and thermoplastic hoses transferring flammable and non-flammable liquids and gases.
Widely used in petrochemical industry, in hose assemblies used for transferring and dispensing
of fuel, gas (e.g. LPG), chemicals and other liquids.
Assembly:
Insert the hose into the ferrule. Check if the hose is accurately positioned using the inspection
hole in the ferrule. Screw the coupling into the hose and into the ferrule at the same time and
tighten both parts of the coupling. After tightening, the hose is pressed into the wall of a ferrule.
description
S1 - BSP female thread
S2 - BSPT male thread

S3 - NPT male thread
S4 - BSP male thread
482
code
hose I.D.
[mm]
wall thickness
[mm]
thread size
[inch]
weight
[kg]
ZP-S1-050-1305-B
ZP-S1-075-1505-B
ZP-S1-075-1904-B
ZP-S1-075-1905-B
ZP-S1-075-1906-B
ZP-S1-100-1505-B
ZP-S1-100-1904-B
ZP-S1-100-1905-B
ZP-S1-100-1906-B
ZP-S1-100-2505-B
ZP-S1-100-2506-B
ZP-S1-125-3206-B
ZP-S1-150-3806-B
ZP-S2-050-1305-B
ZP-S2-075-1505-B
ZP-S2-075-1904-B
ZP-S2-075-1905-B
ZP-S2-075-1906-B
ZP-S3-075-1505-B
ZP-S3-075-1904-B
ZP-S3-075-1905-B
ZP-S3-075-1906-B
ZP-S3-100-2505-B
ZP-S3-100-2506-B
ZP-S4-100-1904-B
ZP-S4-100-1905-B
ZP-S4-100-1906-B
ZP-S4-100-2505-B
ZP-S4-100-2506-B
ZP-S4-125-3206-B
ZP-S4-150-3806-B
13
15
19
19
19
15
19
19
19
25
25
32
38
13
15
19
19
19
15
19
19
19
25
25
19
19
19
25
25
32
38
5
5
4
5
6
5
4
5
6
5
6
6
6,5
5
5
4
5
6
5
4
5
6
5
6
4
5
6
5
6
6
6,5
1/2
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1.1/4
1.1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1
1.1/4
1.1/2
0,13
0,14
0,15
0,16
0,17
0,15
0,17
0,18
0,19
0,21
0,24
0,38
0,60
0,12
0,17
0,17
0,18
0,19
0,17
0,17
0,18
0,19
0,19
0,20
0,19
0,20
0,21
0,25
0,28
0,44
0,56

Fuel nozzles
picture
code
BO-222
BO-223
BO-227
connection
1 BSP
female
1 BSP
female
1 BSP
female
exit diameter
description
25 mm
Fuel nozzle for diesel (not suitable for

AdBlue and petrol).
Material: plastic.
Colour: black.
Flow rate: 60 80 l/min.
Swivel connection: no.
25 mm
Fuel nozzle for diesel (not suitable for

AdBlue and petrol).
Colour: silver
Flow rate: 60 120 l/min.
Swivel connection: yes.
24 mm
Automatic fuel nozzle for diesel (not

suitable for AdBlue and petrol).
Colour: black.
Flow rate: 60 l/min.
Swivel connection: no.
BO-227V
1 BSP
female
21 mm
Automatic fuel nozzle for diesel and

petrol (not suitable for AdBlue).
Colour: green.
BO-223X
1 hose tail
25 mm
Fuel nozzle for AdBlue.

Material: plastic.
Colour: silver.
15 mm
Automatic fuel nozzle for diesel, petrol

and AdBlue.
Material: stainless steel.
Colour: blue.
BO-227X
1 BSP
female
483

CN type fittings
picture
CND type hose connector
picture
CNP type fitting with
BSPT male thread
picture
CNPH type fitting
(HEAVY DUTY) with
BSPT male thread
code
(galvanized steel)
code
(AISI 304)
hose I.D.
[mm]
hose I.D.
[inch]
AC-CND-025
AC-CND-038
AC-CND-050
AC-CND-058
AC-CND-075
AC-CND-100
AC-CND-125
AC-CND-138
AC-CND-150
AC-CND-200
AC-CND-250
AC-CND-300
AC-CND-400
AC-CND-500
AC-CND-600
AC-CND-800
AC-CND-1000
AC-CND-025-SS
AC-CND-038-SS
AC-CND-050-SS
AC-CND-058-SS
AC-CND-075-SS
AC-CND-100-SS
AC-CND-125-SS
AC-CND-138-SS
AC-CND-150-SS
AC-CND-200-SS
AC-CND-250-SS
AC-CND-300-SS
AC-CND-400-SS
AC-CND-500-SS
AC-CND-600-SS
AC-CND-800-SS
AC-CND-1000-SS
6
10
13
16
19
25
32
35
40
50
65
75
100
125
150
200
250
1/4
3/8
1/2
5/8
3/4
1
1.1/4
1.3/8
1.1/2
2
2.1/2
3
4
5
6
8
10
code
(AISI 304)
code
(AISI 316)
hose I.D.
[mm]
AC-CNP-050
AC-CNP-075
AC-CNP-100
AC-CNP-125
AC-CNP-150
AC-CNP-200
AC-CNP-250
AC-CNP-300
AC-CNP-400
AC-CNP-500
AC-CNP-600
AC-CNP-800
AC-CNP-050-SS
AC-CNP-075-SS
AC-CNP-100-SS
AC-CNP-125-SS
AC-CNP-150-SS
AC-CNP-200-SS
AC-CNP-250-SS
AC-CNP-300-SS
AC-CNP-400-SS
AC-CNP-500-SS
AC-CNP-600-SS
AC-CNP-800-SS
AC-CNP-050-SS316
AC-CNP-075-SS316
AC-CNP-100-SS316
AC-CNP-125-SS316
AC-CNP-150-SS316
AC-CNP-200-SS316
AC-CNP-250-SS316
AC-CNP-300-SS316
AC-CNP-400-SS316
AC-CNP-500-SS316
AC-CNP-600-SS316
AC-CNP-800-SS316
13
19
25
32
40
50
65
75
100
125
150
200
code
(galvanized steel)
code
(AISI 304)
code
(AISI 316)
hose I.D.
[mm]
thread
size
[inch]
AC-CNPH-150
AC-CNPH-150-SS AC-CNPH-150-SS316
40
1.1/2
AC-CNPH-200
50
AC-CNPH-250
65
2.1/2
AC-CNPH-300
75
AC-CNPH-400
100
AC-CNPH-500
125
AC-CNPH-600
150
200
AC-CNPH-800
484
thread
size
[inch]
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
8
code
(galvanized steel)

CN type fittings
picture
CNG type fitting with
groove
picture
CNGH type fitting
(HEAVY DUTY) with
groove
code
(carbon steel)
hose I.D.
[mm]
hose I.D.
[inch]
D
[mm]
D1
[mm]
L1
[mm]
L2
[mm]
AC-CNG-075
19
3/4
26,9
24
16
7,95
AC-CNG-100
25
33,7
31
16
7,95
AC-CNG-125
32
1.1/4
42,4
40
16
7,95
AC-CNG-150
40
1.1/2
48,3
45
16
7,95
AC-CNG-200
50
60,3
57
16
7,95
AC-CNG-250
65
2.1/2
73
69
16
7,95
AC-CNG-300
75
88,9
85
16
7,95
AC-CNG-400
100
114,3
110
16
9,53
AC-CNG-500
125
141,3
137
16
9,53
AC-CNG-600
150
168,3
164
16
9,53
AC-CNG-800
200
219,1
215
19
11,13
code
(carbon steel)
hose I.D.
[mm]
hose I.D.
[inch]
D
[mm]
D1
[mm]
L1
[mm]
L2
[mm]
AC-CNGH-200
50
60,3
57
16
7,95
AC-CNGH-250
65
2.1/2
73
69
16
7,95
AC-CNGH-300
75
88,9
85
16
7,95
AC-CNGH-400
100
114,3
110
16
9,53
AC-CNGH-500
125
141,3
137
16
9,53
AC-CNGH-600
150
168,3
164
16
9,53
AC-CNGH-800
200
219,1
215
19
11,13
485

CN type fittings
picture
CNW type fitting, butt
weld
picture
CNWH (HEAVY DUTY)
type fitting, butt weld
picture
CNS type fitting, butt
weld, with BSPT male
thread
486
code
(carbon steel)
code
(AISI 304)
hose I.D.
[mm]
hose I.D.
[inch]
AC-CNW-050
AC-CNW-075
AC-CNW-100
AC-CNW-125
AC-CNW-150
AC-CNW-200
AC-CNW-250
AC-CNW-300
AC-CNW-400
AC-CNW-500
AC-CNW-600
AC-CNW-800
AC-CNW-050-SS
AC-CNW-075-SS
AC-CNW-100-SS
AC-CNW-125-SS
AC-CNW-150-SS
AC-CNW-200-SS
AC-CNW-250-SS
AC-CNW-300-SS
AC-CNW-400-SS
AC-CNW-500-SS
AC-CNW-600-SS
AC-CNW-800-SS
13
19
25
32
40
50
65
75
100
125
150
200
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
8
code
(carbon steel)
code
(AISI 304)
hose I.D.
[mm]
hose I.D.
[inch]
AC-CNWH-200
AC-CNWH-200-SS
50
AC-CNWH-250
AC-CNWH-250-SS
65
2.1/2
AC-CNWH-300
AC-CNWH-300-SS
75
AC-CNWH-400
AC-CNWH-400-SS
100
AC-CNWH-500
AC-CNWH-500-SS
125
AC-CNWH-600
AC-CNWH-600-SS
150
AC-CNWH-800
AC-CNWH-800-SS
200
code
(AISI 304)
code
(AISI 316)
AC-CNS-025-051-SS
AC-CNS-038-038-SS
AC-CNS-038-051-SS
AC-CNS-050-051-SS
AC-CNS-075-051-SS
AC-CNS-075-076-SS
AC-CNS-100-051-SS
AC-CNS-100-076-SS
AC-CNS-150-051-SS
AC-CNS-150-064-SS
AC-CNS-150-076-SS
AC-CNS-200-051-SS
AC-CNS-200-064-SS
AC-CNS-200-076-SS
AC-CNS-200-102-SS
AC-CNS-200-152-SS
AC-CNS-300-076-SS
AC-CNS-300-102-SS
AC-CNS-400-102-SS
AC-CNS-025-051-SS316
AC-CNS-038-038-SS316
AC-CNS-038-051-SS316
AC-CNS-050-051-SS316
AC-CNS-075-051-SS316
AC-CNS-075-076-SS316
AC-CNS-100-051-SS316
AC-CNS-100-076-SS316
AC-CNS-150-051-SS316
AC-CNS-150-064-SS316
AC-CNS-150-076-SS316
AC-CNS-200-051-SS316
AC-CNS-200-064-SS316
AC-CNS-200-076-SS316
AC-CNS-200-102-SS316
AC-CNS-200-152-SS316
AC-CNS-300-076-SS316
AC-CNS-300-102-SS316
AC-CNS-400-102-SS316
thread
size
[inch]
1/4
3/8
3/8
1/2
3/4
3/4
1
1
1.1/2
1.1/2
1.1/2
2
2
2
2
2
3
3
4
length
[mm]
51
38
51
51
51
76
51
76
51
64
76
51
64
76
102
152
76
102
102

CN type fittings
picture
CNFH (HEAVY DUTY)
type crimp ferrule for
hoses
picture
CNFL type crimp ferrule
for hoses
code
(galvanized steel)
hose I.D.
[inch]
hose I.D.
[mm]
AC-CNFH-200A
AC-CNFH-200B
AC-CNFH-200C
AC-CNFH-250A
AC-CNFH-250B
AC-CNFH-300A
AC-CNFH-300B
AC-CNFH-300C
AC-CNFH-300D
AC-CNFH-300E
AC-CNFH-400A
AC-CNFH-400B
AC-CNFH-400C
AC-CNFH-400D
AC-CNFH-400E
AC-CNFH-400F
AC-CNFH-500A
AC-CNFH-500B
AC-CNFH-600A
AC-CNFH-600B
AC-CNFH-600C
AC-CNFH-600D
AC-CNFH-800A
AC-CNFH-800B
2
2
2
2.1/2
2.1/2
3
3
3
3
3
4
4
4
4
4
4
5
5
6
6
6
6
8
8
51
51
51
63
63
76
76
76
76
76
102
102
102
102
102
102
127
127
152
152
152
152
204
204
code
(galvanized steel)
hose I.D.
[inch]
hose I.D.
[mm]
AC-CNFL-150-1
AC-CNFL-150-2
AC-CNFL-150-3
AC-CNFL-200-1
AC-CNFL-200-2
AC-CNFL-200-3
AC-CNFL-250-1
AC-CNFL-250-2
AC-CNFL-300-1
AC-CNFL-300-2
AC-CNFL-300-3
AC-CNFL-400-1
AC-CNFL-400-2
AC-CNFL-400-3
1.1/2
1.1/2
1.1/2
2
2
2
2.1/2
2.1/2
3
3
3
4
4
4
38
38
38
51
51
51
63
63
76
76
76
102
102
102
range of
hose I.D.
[mm]
63,5 67
67 73
73 79
76 79
79 92
89 92
92 98
98 102
102 105
105 108
114 121
121 125
125 128
128 132
133 136
133 140
146 152
152 162
171 181
181 187
187 192
194 203
229 238
240 257
range of
hose I.D.
[mm]
49 51
51 54
54 57
65 67
67 70
70 73
78 82,5
80 82,5
90,5 92
92,5 95
95,5 98,5
117,5 119
119,5 122
122,5 125,5
ferrule I.D.
[mm]
69,9
76,2
82,5
82,5
95,2
95,2
101,6
104,8
108
114,3
123,8
128,6
131,8
134,9
139,7
142,9
155,6
165,1
184,1
190,5
195,3
206,4
241,3
260,3
ferrule I.D.
[mm]
53,8
56,9
60
70
73
76,2
82,3
85,1
94,5
98
100
124
128
130
ferrule
length
[mm]
88,9
88,9
88,9
108
108
127
127
127
127
127
139,7
139,7
139,7
139,7
139,7
139,7
174,6
178,3
190,5
190,5
190,5
190,5
215,9
215,9
ferrule
length
[mm]
74
74
74
90
90
90
89
89
117
117
117
135
135
135
487

Suction strainers
picture
picture
picture
picture
488
code
thread size
[inch]
O.D.
[mm]
height
[mm]
PM-RH20A
1.1/2
121
87
PM-RH25A
150
98
PM-RH30A
2.1/2
150
98
PM-RH35A
165
130
PM-RH40A
165
130
PM-RH60A
225
230
PM-RH80A
280
290
code
thread size
[inch]
O.D.
[mm]
height
[mm]
PM-RH20B
1.1/2
121
87
PM-RH25B
150
98
PM-RH30B
2.1/2
150
98
PM-RH35B
165
130
PM-RH40B
165
130
PM-RH60B
225
230
PM-RH80B
280
290
code
hose I.D.
[mm]
O.D.
[mm]
height
[mm]
PM-RD20T
40
121
165
PM-RD25T
50
150
165
PM-RD35T
75
165
221
PM-RD40T
100
165
221
code
thread size
[inch]
O.D.
[mm]
height
[mm]
PM-RS20A
1.1/2
56
165
PM-RS25A
66
165
PM-RS30A
2.1/2
80
245
PM-RS35A
97
245
PM-RS40A
124
245
PM-RS60A
180
315
PM-RS80A
233
370
description
Cylindrical strainer with
round holes, with BSPT
thread.
(AISI 304 and AISI 316 steel
available on request).
description
Cylindrical strainer with
round holes, with NPT
thread.
description
Cylindrical strainer with round

holes, with hose tail.
description
Long cylindrical strainer

with round holes, with BSPT
thread.

Suction strainers
picture
picture
picture
picture
code
thread size
[inch]
O.D.
[mm]
height
[mm]
PM-RS20B
1.1/2
56
165
PM-RS25B
66
165
PM-RS30B
2.1/2
80
245
PM-RS35B
97
245
PM-RS40B
124
245
PM-RS60B
180
315
PM-RS80B
233
370
code
thread size
[inch]
base
diameter
[mm]
height
[mm]
PM-SK20BHA
1.1/2
240
64
PM-SK25BHA
240
64
PM-SK35BHA
305
100
code
thread size
[inch]
base
diameter
[mm]
height
[mm]
PM-SK20BHB
1.1/2
240
64
PM-SK25BHB
240
64
PM-SK35BHB
305
100
code
thread size
[inch]
base
diameter
[mm]
height
[mm]
PM-SK20THA
1.1/2
240
64
PM-SK25THA
240
64
PM-SK35THA
305
100
description
Long cylindrical strainer with

round holes, with NPT thread.
description
Conical suction strainer with
holes in the bottom, with
BSPT thread.
description
holes in the bottom, with NPT
thread.
description
holes in the bottom, with
BSPT thread.
489

Suction strainers
picture
picture
picture
490
code
thread size
[inch]
base
diameter
[mm]
height
[mm]
PM-SK20THB
1.1/2
240
64
PM-SK25THB
240
64
PM-SK35THB
305
100
code
thread size
[inch]
O.D.
[mm]
height
[mm]
PM-SH20A
1.1/2
121
87
PM-SH25A
150
98
PM-SH30A
2.1/2
150
98
PM-SH35A
165
130
PM-SH40A
165
130
PM-SH60A
225
230
PM-SH80A
280
290
code
thread size
[inch]
O.D.
[mm]
height
[mm]
PM-SH20B
1.1/2
121
87
PM-SH25B
150
98
PM-SH30B
2.1/2
150
98
PM-SH35B
165
130
PM-SH40B
165
130
PM-SH60B
225
230
PM-SH80B
280
290
description
holes in the top, with NPT
thread.
description
Cylindrical suction strainer

with square holes, with
BSPT thread.
description
Cylindrical suction strainer

with square holes, with NPT
thread.

Cast iron connectors - EE type
Material:
Malleable iron - W 40-05 according to PN-EN 1562 and 2000
Working press.: 25 bar (up to +120C), 20 bar (up to +300C)
90 long elbow
BSP female / BSPT male
90 long elbow
2 x BSP female
1/13
2/15
code
DN
EE-1/13-04
EE-1/13-06
EE-1/13-08
EE-1/13-12
EE-1/13-16
EE-1/13-20
EE-1/13-24
EE-1/13-32
EE-1/13-40
EE-1/13-48
EE-1/13-64
8
10
15
20
25
32
40
50
65
80
100
thread size
[mm]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
code
DN
EE-2/15-04
EE-2/15-06
EE-2/15-08
EE-2/15-12
EE-2/15-16
EE-2/15-20
EE-2/15-24
EE-2/15-32
EE-2/15-40
EE-2/15-48
EE-2/15-64
8
10
15
20
25
32
40
50
65
80
100
thread size
[mm]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
45 long elbow
45 long elbow
2 x BSP female
40/22
41/20
code
DN
EE-40/22-04
EE-40/22-06
EE-40/22-08
EE-40/22-12
EE-40/22-16
EE-40/22-20
EE-40/22-24
EE-40/22-32
EE-40/22-40
EE-40/22-48
EE-40/22-64
8
10
15
20
25
32
40
50
65
80
100
thread size
[mm]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
code
DN
EE-41/20-06
EE-41/20-08
EE-41/20-12
EE-41/20-16
EE-41/20-20
EE-41/20-24
EE-41/20-32
EE-41/20-40
EE-41/20-48
10
15
20
25
32
40
50
65
80
thread size
[mm]
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
491

Material:
code
DN
EE-90/6-04
EE-90/6-06
EE-90/6-08
EE-90/6-12
EE-90/6-16
EE-90/6-20
EE-90/6-24
EE-90/6-32
EE-90/6-40
EE-90/6-48
EE-90/6-64
8
10
15
20
25
32
40
50
65
80
100
90 elbow
2 x BSP female
90 reduction elbow
2 x BSP female
90/6
90/6
thread size
[mm]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
45 elbow
2 x BSP female
120/5
code
DN
EE-120/5-08
EE-120/5-12
EE-120/5-16
15
20
25
EE-92/7-08-06
EE-92/7-12-08
EE-92/7-16-12
492
EE-90/6-06-04
EE-90/6-08-04
EE-90/6-08-06
EE-90/6-12-04
EE-90/6-12-06
EE-90/6-12-08
EE-90/6-16-06
EE-90/6-16-08
EE-90/6-16-12
EE-90/6-20-08
EE-90/6-20-12
EE-90/6-20-16
EE-90/6-24-08
EE-90/6-24-12
EE-90/6-24-16
EE-90/6-24-20
EE-90/6-32-08
EE-90/6-32-12
EE-90/6-32-16
EE-90/6-32-20
EE-90/6-32-24
EE-90/6-40-24
EE-90/6-40-32
EE-90/6-48-24
EE-90/6-48-32
EE-90/6-48-40
thread size
[mm]
3/8
1/2
1/2
3/4
3/4
3/4
1
1
1
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
2
2
2
2
2
2.1/2
2.1/2
3
3
3
thread size 1
[inch]
1/2
3/4
1
92/7
thread size 2
[inch]
3/8
1/2
3/4
thread size
[mm]
1/4
1/4
3/8
1/4
3/8
1/2
3/8
1/2
3/4
1/2
3/4
1
1/2
3/4
1
1.1/4
1/2
3/4
1
1.1/4
1.1/2
1.1/2
2
1.1/2
2
2.1/2
90 elbow
92/7
90 reduction elbow
2
code
thread size
[mm]
1/2
3/4
1
code
code
DN
EE-92/7-04
EE-92/7-06
EE-92/7-08
EE-92/7-12
EE-92/7-16
EE-92/7-20
EE-92/7-24
EE-92/7-32
EE-92/7-40
EE-92/7-48
EE-92/7-64
8
10
15
20
25
32
40
50
65
80
100
thread size
[mm]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4

Material:
90 elbow
2 x BSPT male
Reduction tee connection

3 x BSP female
94/94
code
DN
EE-94/94-08
EE-94/94-12
EE-94/94-16
15
20
25
thread size
[mm]
1/2
3/4
1
Tee connection
3 x BSPT male
135/135
code
DN
EE-135/135-16
25
thread size
[mm]
1
Tee connection
3 x BSP female
130/25
code
DN
EE-130/25-04
EE-130/25-06
EE-130/25-08
EE-130/25-12
EE-130/25-16
EE-130/25-20
EE-130/25-24
EE-130/25-32
EE-130/25-40
EE-130/25-48
EE-130/25-64
8
10
15
20
25
32
40
50
65
80
100
thread size
[mm]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
130/25
1
code
thread
size 1
[inch]
thread
size 2
[inch]
thread
size 3
[inch]
EE-130/25-06-04-06
EE-130/25-08-04-08
EE-130/25-08-06-08
EE-130/25-12-04-12
EE-130/25-12-06-12
EE-130/25-12-08-12
EE-130/25-16-06-16
EE-130/25-16-08-16
EE-130/25-16-12-16
EE-130/25-20-06-20
EE-130/25-20-08-20
EE-130/25-20-12-20
EE-130/25-20-16-20
EE-130/25-24-08-24
EE-130/25-24-12-24
EE-130/25-24-16-24
EE-130/25-24-20-24
EE-130/25-32-08-32
EE-130/25-32-12-32
EE-130/25-32-16-32
EE-130/25-32-20-32
EE-130/25-32-24-32
EE-130/25-40-12-40
EE-130/25-40-16-40
EE-130/25-40-20-40
EE-130/25-40-24-40
EE-130/25-40-32-40
EE-130/25-48-16-48
EE-130/25-48-20-48
EE-130/25-48-24-48
EE-130/25-48-32-48
EE-130/25-48-40-48
EE-130/25-64-20-64
EE-130/25-64-24-64
EE-130/25-64-32-64
EE-130/25-64-40-64
EE-130/25-64-48-64
3/8
1/2
1/2
3/4
3/4
3/4
1
1
1
1.1/4
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
2
2
2
2
2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3
3
3
3
3
4
4
4
4
4
1/4
1/4
3/8
1/4
3/8
1/2
3/8
1/2
3/4
3/8
1/2
3/4
1
1/2
3/4
1
1.1/4
1/2
3/4
1
1.1/4
1.1/2
3/4
1
1.1/4
1.1/2
2
1
1.1/4
1.1/2
2
2.1/2
1.1/4
1.1/2
2
2.1/2
3
3/8
1/2
1/2
3/4
3/4
3/4
1
1
1
1.1/4
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
2
2
2
2
2
2.1/2
2.1/2
2.1/2
2.1/2
2.1/2
3
3
3
3
3
4
4
4
4
4
493

Material:
Reduction tee connection

3 x BSP female
130/25
45 Y pipe
3 x BSP female
code
thread
size 1
[inch]
thread
size 2
[inch]
thread
size 3
[inch]
EE-130/25-06-08-06
EE-130/25-08-12-08
EE-130/25-08-16-08
EE-130/25-12-16-12
EE-130/25-16-20-16
EE-130/25-16-24-16
EE-130/25-20-24-20
EE-130/25-20-32-20
EE-130/25-24-32-24
EE-130/25-32-24-32
EE-130/25-32-40-32
EE-130/25-08-06-06
EE-130/25-12-06-08
EE-130/25-12-08-08
EE-130/25-16-08-08
EE-130/25-16-08-12
EE-130/25-16-12-08
EE-130/25-16-12-12
EE-130/25-20-08-16
EE-130/25-20-12-12
EE-130/25-20-12-16
EE-130/25-20-16-16
EE-130/25-24-08-12
EE-130/25-24-16-12
EE-130/25-24-16-16
EE-130/25-24-16-20
EE-130/25-24-20-20
EE-130/25-32-24-24
EE-130/25-08-08-06
EE-130/25-12-12-08
EE-130/25-16-16-08
EE-130/25-16-16-12
EE-130/25-20-20-12
EE-130/25-20-20-16
EE-130/25-24-24-20
3/8
1/2
1/2
3/4
1
1
1.1/4
1.1/4
1.1/2
2
2
1/2
3/4
3/4
1
1
1
1
1.1/4
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2
1/2
3/4
1
1
1.1/4
1.1/4
1.1/2
1/2
3/4
1
1
1.1/4
1.1/2
1.1/2
2
2
2.1/2
3
3/8
3/8
1/2
1/2
1/2
3/4
3/4
1/2
3/4
3/4
1
1/2
1
1
1
1.1/4
1.1/2
1/2
3/4
1
1
1.1/4
1.1/4
1.1/2
3/8
1/2
1/2
3/4
1
1
1.1/4
1.1/4
1.1/2
2
2
3/8
1/2
1/2
1/2
3/4
1/2
3/4
1
3/4
1
1
3/4
3/4
1
1.1/4
1.1/4
1.1/2
3/8
1/2
1/2
3/4
3/4
1
1.1/4
494
165/30
code
DN
EE-135/30-08
EE-135/30-12
EE-135/30-16
EE-135/30-20
EE-135/30-24
EE-135/30-32
15
20
25
32
40
50
thread size
[mm]
1/2
3/4
1
1.1/4
1.1/2
2
Pipe cross
4 x BSP female
180/34
code
DN
EE-180/34-06
EE-180/34-08
EE-180/34-12
EE-180/34-16
EE-180/34-20
EE-180/34-24
EE-180/34-32
EE-180/34-40
EE-180/34-48
EE-180/34-64
10
15
20
25
32
40
50
65
80
100
thread size
[mm]
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
Reduction pipe cross

4 x BSP female
180/34
1
code
thread
size 1
[inch]
thread
size 2
[inch]
thread
size 3
[inch]
thread
size 4
[inch]
EE-180/34-08-06-08-06
EE-180/34-12-06-12-06
EE-180/34-12-08-08-08
EE-180/34-12-08-12-08
EE-180/34-16-08-16-08
EE-180/34-16-12-16-12
EE-180/34-20-08-20-08
EE-180/34-24-12-24-12
EE-180/34-32-12-32-12
1/2
3/4
3/4
3/4
1
1
1.1/4
1.1/2
2
3/8
3/8
1/2
1/2
1/2
3/4
1/2
3/4
3/4
1/2
3/4
1/2
3/4
1
1
1.1/4
1.1/2
2
3/8
3/8
1/2
1/2
1/2
3/4
1/2
3/4
3/4

Material:
code
DN
EE-220/220-08
EE-220/220-12
EE-220/220-16
15
20
25
Pipe Y
3 x BSP female
Side outlet
3 x BSP female
220/220
221/33
thread size
[mm]
1/2
3/4
1
Reduction adaptor
BSP female
code
DN
EE-221/33-06
EE-221/33-08
EE-221/33-12
EE-221/33-16
EE-221/33-20
EE-221/33-24
EE-221/33-32
10
15
20
25
32
40
50
240/3
code
thread size
[inch]
thread size
[inch]
EE-240/3-06-04
EE-240/3-08-04
EE-240/3-08-06
EE-240/3-12-06
EE-240/3-12-08
EE-240/3-16-04
EE-240/3-16-06
EE-240/3-16-08
EE-240/3-16-12
EE-240/3-20-06
EE-240/3-20-08
EE-240/3-20-12
EE-240/3-20-16
EE-240/3-24-08
EE-240/3-24-12
EE-240/3-24-16
EE-240/3-24-20
EE-240/3-32-08
EE-240/3-32-12
EE-240/3-32-16
EE-240/3-32-20
EE-240/3-32-24
EE-240/3-40-16
EE-240/3-40-20
EE-240/3-40-24
EE-240/3-40-32
EE-240/3-48-16
EE-240/3-48-20
EE-240/3-48-24
EE-240/3-48-32
EE-240/3-48-40
EE-240/3-64-24
EE-240/3-64-32
EE-240/3-64-40
EE-240/3-64-48
3/8
1/2
1/2
3/4
3/4
1
1
1
1
1.1/4
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
2
2
2
2
2
2.1/2
2.1/2
2.1/2
2.1/2
3
3
3
3
3
4
4
4
4
1/4
1/4
3/8
3/8
1/2
1/4
3/8
1/2
3/4
3/8
1/2
3/4
1
1/2
3/4
1
1.1/4
1/2
3/4
1
1.1/4
1.1/2
1
1.1/4
1.1/2
2
1
1.1/4
1.1/2
2
2.1/2
1.1/2
2
2.1/2
3
thread size
[mm]
3/8
1/2
3/4
1
1.1/4
1.1/2
2
Adaptor
BSP female
270/2
code
DN
EE-270/2-04
EE-270/2-06
EE-270/2-08
EE-270/2-12
EE-270/2-16
EE-270/2-20
EE-270/2-24
EE-270/2-32
EE-270/2-40
EE-270/2-48
EE-270/2-64
8
10
15
20
25
32
40
50
65
80
100
thread size
[mm]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
495

Material:
Reduction adaptor
BSPT male / BSP female
Reduction nipple
2 x BSPT male
241/45
245/40
code
male thread
size
[inch]
female thread
size
[inch]
EE-241/45-06-04
EE-241/45-08-04
EE-241/45-08-06
EE-241/45-12-04
EE-241/45-12-06
EE-241/45-12-08
EE-241/45-16-06
EE-241/45-16-08
EE-241/45-16-12
EE-241/45-20-06
EE-241/45-20-08
EE-241/45-20-12
EE-241/45-20-16
EE-241/45-24-08
EE-241/45-24-12
EE-241/45-24-16
EE-241/45-24-20
EE-241/45-32-08
EE-241/45-32-12
EE-241/45-32-16
EE-241/45-32-20
EE-241/45-32-24
EE-241/45-40-16
EE-241/45-40-20
EE-241/45-40-24
EE-241/45-40-32
EE-241/45-48-16
EE-241/45-48-20
EE-241/45-48-24
EE-241/45-48-32
EE-241/45-48-40
EE-241/45-64-24
EE-241/45-64-32
EE-241/45-64-40
EE-241/45-64-48
3/8
1/2
1/2
3/4
3/4
3/4
1
1
1
1.1/4
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
2
2
2
2
2
2.1/2
2.1/2
2.1/2
2.1/2
3
3
3
3
3
4
4
4
4
1/4
1/4
3/8
1/4
3/8
1/2
3/8
1/2
3/4
3/8
1/2
3/4
1
1/2
3/4
1
1.1/4
1/2
3/4
1
1.1/4
1.1/2
1
1.1/4
1.1/2
2
1
1.1/4
1.1/2
2
2.1/2
1.1/2
2
2.1/2
3
496
code
thread size
[inch]
thread size
[inch]
EE-245/40-06-04
EE-245/40-08-04
EE-245/40-08-06
EE-245/40-12-06
EE-245/40-12-08
EE-245/40-16-06
EE-245/40-16-08
EE-245/40-16-12
EE-245/40-20-08
EE-245/40-20-12
EE-245/40-20-16
EE-245/40-24-08
EE-245/40-24-12
EE-245/40-24-16
EE-245/40-24-20
EE-245/40-32-08
EE-245/40-32-12
EE-245/40-32-16
EE-245/40-32-20
EE-245/40-32-24
EE-245/40-40-16
EE-245/40-40-20
EE-245/40-40-24
EE-245/40-40-32
EE-245/40-48-32
EE-245/40-48-40
3/8
1/2
1/2
3/4
3/4
1
1
1
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
2
2
2
2
2
2.1/2
2.1/2
2.1/2
2.1/2
3
3
1/4
1/4
3/8
3/8
1/2
3/8
1/2
3/4
1/2
3/4
1
1/2
3/4
1
1.1/4
1/2
3/4
1
1.1/4
1.1/2
1
1.1/4
1.1/2
2
2
2.1/2
Nipple
2 x BSPT male
280/38
code
DN
EE-280/38-04
EE-280/38-06
EE-280/38-08
EE-280/38-12
EE-280/38-16
EE-280/38-20
EE-280/38-24
EE-280/38-32
EE-280/38-40
EE-280/38-48
EE-280/38-64
8
10
15
20
25
32
40
50
65
80
100
thread size
[mm]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4

Material:
Reduction adaptor
Blank plug
246/246
290/46
code
female thread
size
[inch]
male thread
size
[inch]
EE-246/246-06-04
EE-246/246-08-04
EE-246/246-08-06
EE-246/246-12-06
EE-246/246-12-08
EE-246/246-16-08
EE-246/246-16-12
EE-246/246-20-12
EE-246/246-20-16
EE-246/246-24-16
EE-246/246-24-20
EE-246/246-32-20
EE-246/246-32-24
3/8
1/2
1/2
3/4
3/4
1
1
1.1/4
1.1/4
1.1/2
1.1/2
2
2
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
1
1
1.1/4
1.1/4
1.1/2
code
EE-300/43-04
EE-300/43-06
EE-300/43-08
EE-300/43-12
EE-300/43-16
EE-300/43-20
EE-300/43-24
EE-300/43-32
EE-300/43-40
EE-300/43-48
EE-300/43-64
code
EE-290/46-04
EE-290/46-06
EE-290/46-08
EE-290/46-12
EE-290/46-16
EE-290/46-20
EE-290/46-24
EE-290/46-32
EE-290/46-40
EE-290/46-48
EE-290/46-64
thread size
[mm]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
Blank cap
Locknut
300/43
310/44
thread size
[mm]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
code
EE-310/44-04
EE-310/44-06
EE-310/44-08
EE-310/44-12
EE-310/44-16
EE-310/44-20
EE-310/44-24
EE-310/44-32
EE-310/44-40
EE-310/44-48
EE-310/44-64
thread size
[mm]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
497

Material:
code
DN
EE-330/48-06
EE-330/48-08
EE-330/48-12
EE-330/48-16
EE-330/48-20
EE-330/48-24
EE-330/48-32
EE-330/48-40
EE-330/48-48
EE-330/48-64
10
15
20
25
32
40
50
65
80
100
code
DN
EE-340/54-06
EE-340/54-08
EE-340/54-12
EE-340/54-16
EE-340/54-20
EE-340/54-24
EE-340/54-32
EE-340/54-40
EE-340/54-48
EE-340/54-64
10
15
20
25
32
40
50
65
80
100
498
Pipe joint
2 x BSP female
Pipe joint
330/48
331/59
thread size
[mm]
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
code
DN
EE-331/59-06
EE-331/59-08
EE-331/59-12
EE-331/59-16
EE-331/59-20
EE-331/59-24
EE-331/59-32
EE-331/59-40
EE-331/59-48
10
15
20
25
32
40
50
65
80
thread size
[mm]
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
Pipe joint
2 x BSPT female
Pipe joint
BSPT female / BSPT male
340/54
341/60
thread size
[mm]
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
code
DN
EE-341/60-06
EE-341/60-08
EE-341/60-12
EE-341/60-16
EE-341/60-20
EE-341/60-24
EE-341/60-32
EE-341/60-40
EE-341/60-48
EE-341/60-64
10
15
20
25
32
40
50
65
80
100
thread size
[mm]
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4

Brass connectors - RV type
Material:
Brass
90 elbow
BSP female
90 elbow
BSP female / male
3400
3401
code
size
thread size
[inch]
code
size
thread size
[inch]
RV-3400-04
RV-3400-06
RV-3400-08
RV-3400-12
RV-3400-16
RV-3400-20
RV-3400-24
RV-3400-32
8
10
15
20
25
32
40
50
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
RV-3401-04
RV-3401-06
RV-3401-08
RV-3401-12
RV-3401-16
RV-3401-20
RV-3401-24
RV-3401-32
8
10
15
20
25
32
40
50
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
Adaptor
BSP female
Tee connection
BSP female
3410
3420
code
size
thread size
[inch]
code
size
thread size
[inch]
RV-3410-04
RV-3410-06
RV-3410-08
RV-3410-12
RV-3410-16
RV-3410-20
RV-3410-24
RV-3410-32
8
10
15
20
25
32
40
50
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
RV-3420-04
RV-3420-06
RV-3420-08
RV-3420-12
RV-3420-16
RV-3420-20
RV-3420-24
RV-3420-32
8
10
15
20
25
32
40
50
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
Nipple
BSP male
Reduction nipple
BSP male
3430
3430
code
size
thread size
[inch]
code
size
thread
size
[inch]
thread
size
[inch]
RV-3430-04
RV-3430-06
RV-3430-08
RV-3430-12
RV-3430-16
RV-3430-20
RV-3430-24
RV-3430-32
8
10
15
20
25
32
40
50
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
RV-3430-04-06
RV-3430-06-08
RV-3430-08-12
RV-3430-12-16
RV-3430-16-20
RV-3430-20-24
RV-3430-24-32
RV-3430-32-40
8
10
15
20
25
32
40
50
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
499

Brass connectors - RV type
Material:
Brass
Blank plug
BSP male
Blank cap
BSP female
3480
3490
code
size
thread size
[inch]
code
size
thread size
[inch]
RV-3480-04
RV-3480-06
RV-3480-08
RV-3480-12
RV-3480-16
RV-3480-20
RV-3480-24
RV-3480-32
8
10
15
20
25
32
40
50
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
RV-3490-04
RV-3490-06
RV-3490-08
RV-3490-12
RV-3490-16
RV-3490-20
RV-3490-24
RV-3490-32
8
10
15
20
25
32
40
50
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
Reduction adaptor
BSP male / female
Pipe joint
BSP female
3450
3460
code
size
male
thread size
[inch]
female
thread size
[inch]
RV-3450-04-02
RV-3450-06-02
RV-3450-06-04
RV-3450-08-04
RV-3450-08-06
RV-3450-12-04
RV-3450-12-06
RV-3450-12-08
RV-3450-16-06
RV-3450-16-08
RV-3450-16-12
RV-3450-20-12
RV-3450-20-16
RV-3450-24-12
RV-3450-24-16
RV-3450-24-20
RV-3450-32-20
RV-3450-32-24
RV-3450-40-32
6
6
8
8
10
8
10
15
10
15
20
20
25
20
25
32
32
40
50
1/4
3/8
3/8
1/2
1/2
3/4
3/4
3/4
1
1
1
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
2
2
2.1/2
1/8
1/8
1/4
1/4
3/8
1/4
3/8
1/2
3/8
1/2
3/4
3/4
1
3/4
1
1.1/4
1.1/4
1.1/2
2
500
code
size
thread size
[inch]
RV-3460-08
RV-3460-12
RV-3460-16
15
20
25
1/2
3/4
1

Brass connectors - MU type
Nipple BSP male (internal cone)
Reduction adaptor BSP female / male
code
thread
size
[inch]
thread
size
[inch]
spanner
size
[mm]
MU-4201
MU-4202
MU-4203
MU-4204
MU-4208
MU-4205
MU-4206
MU-4213
MU-4207
MU-4209
MU-4215
MU-4211
MU-4210
MU-4216
1/8
1/8
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
3/4
3/4
1
1/8
1/4
1/4
3/8
1/2
3/8
1/2
3/4
1/2
3/4
1
3/4
1
1
14
17
17
19
24
19
24
32
24
32
36
32
36
36
90 elbow BSP female
code
male
thread size
[inch]
female
thread size
[inch]
spanner
size
[mm]
MU-4251
MU-4256
MU-4252
MU-4257
MU-4254
MU-4253
MU-4258
MU-4255
MU-4259
MU-4260
1/4
3/8
3/8
1/2
1/2
1/2
3/4
3/4
1
1
1/8
1/8
1/4
1/8
1/4
3/8
3/8
1/2
1/2
3/4
17
19
19
24
24
21
32
32
36
36
Tee connection BSP female
code
thread size
[mm]
code
thread size
[mm]
MU-1142
MU-1143
MU-1144
MU-1145
MU-1146
MU-1147
1/8
1/4
3/8
1/2
3/4
1
MU-1172
MU-1173
MU-1174
MU-1175
MU-1176
MU-1177
1/8
1/4
3/8
1/2
3/4
1
501

Stainless steel connectors - VT type
Material:
AISI 316
90 elbow BSP female
45 elbow BSP female
VT 101
code
size
thread size
[mm]
NM-VT101-04
NM-VT101-06
NM-VT101-08
NM-VT101-12
NM-VT101-16
NM-VT101-20
NM-VT101-24
NM-VT101-32
NM-VT101-40
NM-VT101-48
NM-VT101-64
8
10
15
20
25
32
40
50
65
80
100
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
90 elbow BSP female / BSPT male
VT 107
code
size
thread size
[mm]
NM-VT107-04
NM-VT107-06
NM-VT107-08
NM-VT107-12
NM-VT107-16
NM-VT107-20
NM-VT107-24
NM-VT107-32
8
10
15
20
25
32
40
50
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
Tee connection BSP female
VT 153
VT 103
code
size
thread size
[mm]
code
size
thread size
[mm]
NM-VT153-04
NM-VT153-06
NM-VT153-08
NM-VT153-12
NM-VT153-16
NM-VT153-20
NM-VT153-24
NM-VT153-32
NM-VT153-40
NM-VT153-48
8
10
15
20
25
32
40
50
65
80
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
NM-VT103-04
NM-VT103-06
NM-VT103-08
NM-VT103-12
NM-VT103-16
NM-VT103-20
NM-VT103-24
NM-VT103-32
NM-VT103-40
NM-VT103-48
8
10
15
20
25
32
40
50
65
80
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
502

Material:
AISI 316
Reduction tee BSP female

3
Cross BSP female
VT 105
VT 104
code
size
thread
size 1, 2
[inch]
thread
size 3
[inch]
code
size
thread size
[mm]
NM-VT104-06-04
NM-VT104-08-04
NM-VT104-08-06
NM-VT104-12-06
NM-VT104-12-08
NM-VT104-16-08
NM-VT104-16-12
NM-VT104-24-12
NM-VT104-32-12
NM-VT104-32-16
NM-VT104-32-24
10
15
15
20
20
25
25
40
50
50
50
3/8
1/2
1/2
3/4
3/4
1
1
1.1/2
2
2
2
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
3/4
1
1.1/2
NM-VT105-04
NM-VT105-06
NM-VT105-08
NM-VT105-12
NM-VT105-16
NM-VT105-20
NM-VT105-24
NM-VT105-32
NM-VT105-40
NM-VT105-48
NM-VT105-64
8
10
15
20
25
32
40
50
65
80
100
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
Nipple BSPT male
Reduction nipple BSPT male

2
VT 116
code
size
thread
size
[inch]
spanner
size
[mm]
NM-VT116-04
NM-VT116-06
NM-VT116-08
NM-VT116-12
NM-VT116-16
NM-VT116-20
NM-VT116-24
NM-VT116-32
NM-VT116-40
NM-VT116-48
NM-VT116-64
8
10
15
20
25
32
40
50
65
80
100
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
14
19
22
30
36
46
50
65
81
92
120
VT 117
1
code
size
thread
size 1
[inch]
thread
size 2
[inch]
spanner
size
[mm]
NM-VT117-04-02
NM-VT117-06-04
NM-VT117-08-06
NM-VT117-12-08
NM-VT117-16-12
NM-VT117-20-16
NM-VT117-24-20
NM-VT117-32-24
8
10
15
20
25
32
40
50
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
14
19
22
30
36
46
50
65
503

Material:
AISI 316
Nipple (butt weld) BSPT male
Double nipple BSPT male
VT 126
code
size
thread
size
[inch]
NM-VT126-04
NM-VT126-06
NM-VT126-08
NM-VT126-12
NM-VT126-16
NM-VT126-20
NM-VT126-24
NM-VT126-32
NM-VT126-40
NM-VT126-48
NM-VT126-64
8
10
15
20
25
32
40
50
65
80
100
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
wall
diameter
thickness
[mm]
[mm]
13,5
17,2
21,3
26,9
33,7
42,4
48,3
60,3
76,1
88,9
114,3
2,3
2,3
2,6
2,6
3,2
3,2
3,2
3,6
3,6
4
4,5
Fitting with hose tail and BSPT male
VT 127
code
size
thread
size
[inch]
NM-VT127-04
NM-VT127-06
NM-VT127-08
NM-VT127-12
NM-VT127-16
NM-VT127-20
NM-VT127-24
NM-VT127-32
NM-VT127-40
NM-VT127-48
NM-VT127-64
8
10
15
20
25
32
40
50
65
80
100
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
wall
diameter
thickness
[mm]
[mm]
13,5
17,2
21,3
26,9
33,7
42,4
48,3
60,3
76,1
88,9
114,3
2,3
2,3
2,6
2,6
3,2
3,2
3,2
3,6
3,6
4
4,5
Adaptor BSP female
VT 1221
VT 123
code
size
thread
size
[inch]
fitting
diameter
[mm]
hose
size
[inch]
code
size
thread
size
[inch]
diameter
[mm]
length
[mm]
NM-VT123-02
NM-VT123-04
NM-VT123-06
NM-VT123-08
NM-VT123-12
NM-VT123-16
NM-VT123-20
NM-VT123-24
NM-VT123-32
NM-VT123-40
NM-VT123-48
6
8
10
15
20
25
32
40
50
65
80
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
6,7
9
10,5
14
20,5
27,5
34
40,3
52
65
77
1/4
5/16
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
NM-VT1221-04
NM-VT1221-06
NM-VT1221-08
NM-VT1221-12
NM-VT1221-16
NM-VT1221-20
NM-VT1221-24
NM-VT1221-32
NM-VT1221-40
NM-VT1221-48
NM-VT1221-64
8
10
15
20
25
32
40
50
65
80
100
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
18
21
25
31
38
47
52
68
84,5
97
125
26,5
29
33
34,5
41,5
47,5
47,5
62
70
76
86
504

Material:
AISI 316
Short adaptor BSP female
Reduction adaptor BSP female
VT 121
VT 102
code
size
thread
size
[inch]
diameter
[mm]
length
[mm]
NM-VT102-04
NM-VT102-06
NM-VT102-08
NM-VT102-12
NM-VT102-16
NM-VT102-20
NM-VT102-24
NM-VT102-32
8
10
15
20
25
32
40
50
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
18,5
21,3
26,4
31,8
39,5
48,3
54,5
66,3
11
12
15
15
19
22
22
26
Reduction nipple BSP female / BSPT male

2
code
size
thread
size 1
[inch]
thread
size 2
[inch]
length
[mm]
NM-VT121-06-04
NM-VT121-08-04
NM-VT121-08-06
NM-VT121-12-06
NM-VT121-12-08
NM-VT121-16-08
NM-VT121-16-12
NM-VT121-20-12
NM-VT121-20-16
NM-VT121-24-16
NM-VT121-24-20
NM-VT121-32-24
10
15
15
20
20
25
25
32
32
40
40
50
3/8
1/2
1/2
3/4
3/4
1
1
1.1/4
1.1/4
1.1/2
1.1/2
2
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
1
1
1.1/4
1.1/2
30
34
34
38
38
42
42
48
48
52
52
58
Blank cap BSP female
VT 115
1
code
size
thread
size 1
[inch]
thread
size 2
[inch]
spanner
size
[mm]
NM-VT115-04-02
NM-VT115-06-02
NM-VT115-06-04
NM-VT115-08-04
NM-VT115-08-06
NM-VT115-12-04
NM-VT115-12-06
NM-VT115-12-08
NM-VT115-16-04
NM-VT115-16-06
NM-VT115-16-08
NM-VT115-16-12
NM-VT115-20-08
NM-VT115-20-12
NM-VT115-20-16
NM-VT115-24-12
NM-VT115-24-16
NM-VT115-24-20
NM-VT115-32-16
NM-VT115-32-20
NM-VT115-32-24
8
10
10
15
15
20
20
20
25
25
25
25
32
32
32
40
40
40
50
50
50
1/4
3/8
3/8
1/2
1/2
3/4
3/4
3/4
1
1
1
1
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
2
2
2
1/8
1/8
1/4
1/4
3/8
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1/2
3/4
1
3/4
1
1.1/4
1
1.1/4
1.1/2
14
19
19
22
22
30
30
30
36
36
36
36
46
46
46
50
50
50
65
65
65
VT 118
code
thread size
[mm]
spanner size
[mm]
NM-VT118-04
NM-VT118-06
NM-VT118-08
NM-VT118-12
NM-VT118-16
NM-VT118-20
NM-VT118-24
NM-VT118-32
NM-VT118-40
NM-VT118-48
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
19
23
27
35
41
50
56
70
84
99
505

Material:
AISI 316
Nut BSP female
Blank plug BSPT male
VT 124
code
thread size
[mm]
spanner size
[mm]
NM-VT124-04
NM-VT124-06
NM-VT124-08
NM-VT124-12
NM-VT124-16
NM-VT124-20
NM-VT124-24
NM-VT124-32
NM-VT124-40
NM-VT124-48
NM-VT124-64
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
22
27
32
36
46
55
60
75
95
105
135
Hexagonal blank plug BSPT male
VT 113
code
thread size
[mm]
spanner size
[mm]
NM-VT113-04
NM-VT113-06
NM-VT113-08
NM-VT113-12
NM-VT113-16
NM-VT113-20
NM-VT113-24
NM-VT113-32
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
9
12
14
17
19
23
32
32
Pipe joint BSP female (cone seal)
VT 114
VT 108
code
thread size
[mm]
spanner size
[mm]
code
thread
size
[inch]
joint
length
[mm]
spanner
size
[mm]
NM-VT114-04
NM-VT114-06
NM-VT114-08
NM-VT114-12
NM-VT114-16
NM-VT114-20
NM-VT114-24
NM-VT114-32
NM-VT114-40
NM-VT114-48
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
17
21
23
29
36
46
50
60
80
92
NM-VT108-04
NM-VT108-06
NM-VT108-08
NM-VT108-12
NM-VT108-16
NM-VT108-20
NM-VT108-24
NM-VT108-32
NM-VT108-40
NM-VT108-48
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
32
39
41
47
52
55
60
70
90
105
28
32
41
46
60
68
78
85
110
128
506

Material:
AISI 316
Pipe joint BSP female / BSPT male (cone seal)
Pipe joint (butt weld), cone seal
VT 109
code
thread
size
[inch]
joint
length
[mm]
spanner
size
[mm]
NM-VT109-04
NM-VT109-06
NM-VT109-08
NM-VT109-12
NM-VT109-16
NM-VT109-20
NM-VT109-24
NM-VT109-32
NM-VT109-40
NM-VT109-48
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
43
50
57
63
74
80
84
95
110
125
30
32
41
46
55
61
75
85
109
125
VT 110
code
NM-VT110-13,8
NM-VT110-17,0
NM-VT110-21,3
NM-VT110-26,9
NM-VT110-33,3
NM-VT110-42,4
NM-VT110-48,3
NM-VT110-60,3
pipe I.D. pipe O.D.

[mm]
[mm]
9
12
15
20
26
35
38
50
13,8
17
21,3
26,9
33,3
42,4
48,3
60,3
joint
length
[mm]
spanner
size
[mm]
34
40
44
55
65
67
71
75
27
28
32
41
50
60
70
85
507

Fittings and connectors - EC type
EC fittings are designed for low-pressure hoses (with maximum working pressure up to 30 bar, depending on
diameter). Widely used for rubber and plastic hoses that are not reinforced, as well as with textile reinforcement
or with external steel braid, etc. EC fittings are crimped (H type ferrules) with the use of low pressure crimping
machines (see MACHINES AND ACCESORIES).
Contrary to hydraulic fittings, EC fittings are not equipped with a collar joining ferrule with fitting. Widely used in
flexible hose assemblies for sanitary, fuel, air installations, etc. EC ferrules can also be used for NiTO fittings as
well as quick release couplings.
S type fitting (ball end, 60 cone seal, similar to DIN
H type ferrule
7608)
code
(galv. steel)
code
(AISI 304)
I.D.
[mm]
bore
diameter
[mm]
length
[mm]
code
(galv. steel)
agreed
nominal
diameter DN
approx.
hose I.D.
[mm]
use nut
UM type
EC-104040
EC-104050
EC-104051
EC-104060
EC-104061
EC-104062
EC-104063
EC-104064
EC-104065
EC-104080
EC-104082
EC-104084
EC-104085
EC-104089
EC-104099
EC-104105
EC-104100
EC-104106
EC-104107
EC-104118
EC-104112
EC-104120
EC-104121
EC-104260
EC-104262
EC-104263
EC-104280
EC-104284
EC-104305
EC-104300
EC-104307
EC-104318
EC-104312
EC-104319
EC-104323
EC-104324
EC-104327
EC-104331
EC-104340
-
9
10
11
11
12
12
13,5
12
15
12
13,5
12,5
14
15
14
14,5
15
16
15
17
18
19
20
20
22
22
23
23
24,5
24,5
26,5
28
29
30
31
32
33
34
36
38
40
40
45
22
5,5
6,5
6,5
7,5
12
7,5
7,5
7,5
7,5
9
10
10
10
10
10
11,7
11,7
11,7
11,7
11,7
13,8
13,8
13,8
13,8
13,8
15,6
17
18,4
17
17
19,5
20,5
20,7
24
24
24
24
24
25
27
28
30
35
15,6
17
17
17
17
19
20
20
10
20
15
20
15
20
20
22
16
20
20
16
21
21
26
26
22
26
32
32
28
31
33
33
34
30
32
34
34
34
34
35
35
40
35
36
20
EC-105050
EC-105060
EC-105068
EC-105069
EC-105080
EC-105081
EC-105100
EC-105102
EC-105112
EC-105114
EC-105150
EC-105156
EC-105186
EC-105113
EC-105151
EC-105231
EC-105233
3
4
4/6
4/8
6
6/8
8
8/10
10
10/12
12
12/16
16
10
12
20
20
4,5
5,5
5,5
5,5
7,5
7,5
9,5
9,5
11,5
11,5
14,5
14,5
17
11,5
14,5
19,5
19,5
M10x1 / 1/8
M12x1,5 / 1/4
M14x1,5
M16x1,5
M14x1,5 / 1/4
M16x1,5
M16x1,5 / 3/8
M18x1,5
M18x1,5
M22x1,5
M22x1,5
M26x1,5
M26x1,5
1/2
1/2
3/4
1
use nut
UM type
EC-104122
EC-104123
EC-104124
EC-104126
EC-104128
EC-104130
EC-104132
EC-104133
EC-104136
EC-104138
EC-104140
EC-104142
EC-104145
EC-104158
508
SF type fitting (flat seal)
code
(galv. steel)
agreed
nominal
diameter DN
approx.
hose I.D.
[mm]
EC-105205
EC-105206
EC-105208
EC-105210
EC-105212
EC-105215
EC-105226
EC-105228
EC-105213
EC-105216
EC-105230
EC-105232
3
4
6
8
10
12
12/16
16
10
12
20
20
4,5
5,5
7,5
9,5
11,5
14,5
14,5
17
11,5
14,5
19,5
19,5
M10x1 / 1/8
M12x1,5 / 1/4
M14x1,5 / 1/4
M16x1,5 / 3/8
M18x1,5
M26x1,5
M26x1,5
1/2
1/2
3/4
1

Screw nut UM type (similar to DIN 3870)
90 elbow hose fitting, RBU type

(ball end, 60 cone seal)
code
(galv. steel)
agreed
nominal
diameter DN
thread
size
spanner
size
[mm]
EC-105510
EC-105512
EC-105514
EC-105516
EC-105518
EC-105522
EC-105526
EC-105605
EC-105606
EC-105608
EC-105610
EC-105612
EC-105609
EC-105611
3
4
6
8
10
12
16
3
4
6
8
10
6
8
M10x1
M12x1,5
M14x1,5
M16x1,5
M18x1,5
M22x1,5
M26x1,5
1/8 BSP
1/4 BSP
1/4 BSP
3/8 BSP
1/2 BSP
1/4 BSP (left)
3/8 BSP (left)
12
14
17
19
22
27
32
14
17
17
19
24
17
19
SA type fitting with metric male thread and hose tail

(24 cone seal)
code
(galv. steel)
EC-110205
EC-110206
EC-110208
EC-110210
EC-110212
EC-110215
EC-110216
EC-110217
EC-110218
agreed
approx.
nom. diam. hose I.D.
DN
[mm]
3
4
6
8
10
12
12
12/16
16
4,5
5,5
7,5
9,5
11,5
14,5
14,5
14,5
17
pipe O.D.
[mm]
thread
size
[mm]
5
6
8
10
12
15
16
18
18
M10x1
M12x1,5
M14x1,5
M16x1,5
M18x1,5
M22x1,5
M22x1,5
M26x1,5
M26x1,5
code
(galv. steel)
agreed
nominal
diameter DN
approx.
hose I.D.
[mm]
thread
size
[mm]
EC-108210
EC-108212
EC-108214
EC-108216
EC-108218
EC-108222
3
4
6
8
10
12
4,5
5,5
7,5
9,5
11,5
14,5
M10x1,0
M12x1,5
M14x1,5
M16x1,5
M18x1,5
M22x1,5
Soldering nipple LN type (ball end, 60 cone seal,

similar to DIN 7608)
code
(galv. steel)
pipe O.D.
[mm]
use nut
UM type
EC-109705
EC-109706
EC-109708
EC-109710
EC-109712
EC-109715
EC-109718
5
6
8
10
12
15
18
M10x1
M12x1,5
M14x1,5
M16x1,5
M18x1,5
M22x1,5
M26x1,5
SA type fitting with male metric thread and hose tail

(60 cone seal or flat seal)
code
(galv. steel)
agreed
nominal
diameter DN
approx.
hose I.D.
[mm]
thread
size
[mm]
EC-110005
EC-110006
EC-110008
EC-110010
EC-110012
EC-110122
EC-110125
EC-110126
3
4
6
8
10
12
12/16
16
4,5
5,5
7,5
9,5
11,5
14,5
14,5
17
M10x1 (60)
M12x1,5 (60)
M14x1,5 (60)
M16x1,5 (60)
M18x1,5 (60)
M22x1,5
M26x1,5
M26x1,5
509

SA type fitting with male BSP thread and hose tail
LST type soldering fitting with male metric thread
(60 cone seal)
(60 cone seal)
code
(galv. steel)
agreed
nominal
diameter DN
approx.
hose I.D.
[mm]
thread
size
[inch]
EC-110305
EC-110304
EC-110306
EC-110316
EC-110308
EC-110317
EC-110310
EC-110312
EC-110315
3
4
4
4
6
6
8
10
12
3,5
4,5
5,5
5,5
7,5
7,5
9,5
11,5
14,5
1/8
1/8
1/4
3/8
1/4
3/8
3/8
1/2
1/2
code
(galv. steel)
pipe O.D.
[mm]
thread size
[mm]
EC-109805
EC-109806
EC-109808
EC-109810
EC-109812
EC-109815
EC-109818
5
6
8
10
12
15
18
M10x1
M12x1,5
M14x1,5
M16x1,5
M18x1,5
M22x1,5
M26x1,5
BANJO double fitting, DRS type
BANJO straight fitting, RS type
code
(galv. steel)
agreed
nominal
diameter DN
approx.
hose I.D.
[mm]
bore
diameter
EC-106006
EC-106008
EC-106010
EC-106012
EC-106014
EC-106015
EC-106110
EC-106112
EC-106114
EC-106116
EC-106212
EC-106214
EC-106216
EC-106218
EC-106316
EC-106318
EC-106418
EC-106422
EC-106426
EC-106522
EC-106526
2/3
3
4
4/6
4/8
4/8
6/4
6
6/8
6/8
8/6
8
8/10
8/12
10
10/12
12
12/16
12/20
16
16/20
3,5
4,5
5,5
5,5
5,5
5,5
7,5
7,5
7,5
7,5
9,5
9,5
9,5
9,5
11,5
11,5
14,5
14,5
14,5
17
17
6 mm
8 mm
10 mm = 1/8
12 mm
14 mm = 1/4
13,5 mm = 1/4
10 mm
12 mm
14 mm = 1/4
16,8 mm = 3/8
12 mm
14 mm = 1/4
16 mm
18 mm
16 mm
18 mm
18 mm
22 mm
26 mm
22 mm
26 mm
510
code
(galv. steel)
agreed
nominal
diameter DN
approx.
hose I.D.
[mm]
bore
diameter
EC-106808
EC-106810
EC-106812
EC-106814
3
4
6
8
4,5
5,5
7,5
9,5
8 mm
10 mm = 1/8
12 mm
14 mm = 1/4
90 BANJO elbow, RBR type
code
(galv. steel)
agreed
nominal
diameter DN
approx.
hose I.D.
[mm]
bore
diameter
EC-106808
EC-106810
EC-106812
EC-106814
3
4
6
8
4,5
5,5
7,5
9,5
8 mm
10 mm = 1/8
12 mm
14 mm = 1/4

Soldering BANJO fitting, RL type (similar to DIN 7642)
BANJO double soldering fitting, DRL type
code
(galv. steel)
pipe O.D.
[mm]
bore diameter
[mm]
code
(galv. steel)
pipe O.D.
[mm]
bore diameter
[mm]
EC-109008
EC-109010
EC-109012
EC-109014
EC-109112
EC-109114
EC-109213
EC-109214
EC-109216
EC-109316
EC-109318
EC-109418
EC-109422
EC-109426
EC-109526
EC-109530
5
6
6
6
8
8
10
10
10
12
12
15
18
18
22
28
8
10
12
14
12
14
12
14
16
16
18
18
22
26
26
30
EC-109608
EC-109610
EC-109612
EC-109614
EC-109616
5
6
8
10
12
8
10
12
14
16
BANJO R-G type adaptor with metric male thread,

24 cone seal
code
(galv. steel)
bore
diameter
[mm]
pipe O.D.
[mm]
thread
size
[mm]
EC-106950
EC-106952
EC-106954
EC-106956
EC-106958
EC-106960
EC-106961
EC-106962
EC-106964
EC-106963
8
10
12
14
14
16
18
18
22
26
5
6
8
8
10
12
12
15
15
18
M10x1
M12x1,5
M14x1,5
M14x1,5
M16x1,5
M18x1,5
M18x1,5
M22x1,5
M22x1,5
M26x1,5
BANJO R-G type adaptor with metric male thread,

60 cone seal
code
(galv. steel)
bore diameter
[mm]
thread size
EC-106908
EC-106910
EC-106912
EC-106913
EC-106914
EC-106915
EC-106916
EC-106918
8
10
12
14
14
14
16
18
M10x1
M12x1,5
M14x1,5
1/4 BSP
M14x1,5
M16x1,5
M18x1,5
M22x1,5
Double hollow screw for BANJO, DHS type
code
(galv. steel)
thread
size
[mm]
length without
head
[mm]
spanner
size
[mm]
EC-107108
EC-107110
EC-107112
EC-107114
EC-107116
EC-107118
EC-107122
EC-107126
M8x1
M10x1
M12x1,5
M14x1,5
M16x1,5
M18x1,5
M22x1,5
M26x1,5
27
30
38
42
46
54
66
77
12
14
17
19
22
24
27
32
511

Hollow screw for BANJO, HS type (similar to DIN 7643)
code
(galv. steel)
thread
size
length without
head
[mm]
spanner
size
[mm]
EC-107006
EC-107008
EC-107009
EC-107010
EC-107011
EC-107012
EC-107014
EC-107016
EC-107018
EC-107022
EC-107026
EC-107030
EC-107040
EC-107041
EC-107042
EC-107043
M6x1
M8x1
M8x1,25
M10x1
M10x1,5
M12x1,5
M14x1,5
M16x1,5
M18x1,5
M22x1,5
M26x1,5
M30x1,5
1/8
1/4
3/8
1/2
17
17
17
19
19
24
26
28
32
39
45
51
19
26
28
39
11
12
12
14
14
17
19
22
24
27
32
36
14
19
22
27
BE-pipe fitting , RST type
code
(galv. steel)
agreed
nominal
diameter DN
approx.
hose I.D.
[mm]
pipe O.D.
[mm]
EC-108504
EC-108505
EC-108506
EC-108508
EC-108510
EC-108512
EC-108515
EC-108518
2
3
4
6
8
10
12
16
3,5
4,5
5,5
7,5
9,5
11,5
14,5
17
4
5
6
8
10
12
15
18
512
T connector, TSM type
code
(galv. steel)
agreed
nominal
diameter DN
approx.
hose I.D.
[mm]
EC-127829
EC-127830
EC-127831
EC-127832
EC-127833
2
4
6
8
10
4,5
5,5
7,5
9,5
11,5
90 elbow fitting, RBS type
code
(galv. steel)
agreed
nominal
diameter DN
approx.
hose I.D.
[mm]
pipe O.D.
[mm]
EC-108304
EC-108305
EC-108306
EC-108308
EC-108310
EC-108312
EC-108315
EC-108318
2,5
3
4
6
8
10
12
16
3,5
4,5
5,5
7,5
9,5
11,5
14,5
17
5
5
5
8
10
12
15
18
45 elbow fitting, RBS type
code
(galv. steel)
agreed
nominal
diameter DN
approx.
hose I.D.
[mm]
pipe O.D.
[mm]
EC-108307
EC-108309
EC-108311
EC-108313
EC-108316
4
6
8
10
12
5,5
7,5
9,5
11,5
14,5
5
8
10
12
15

Adaptor with metric male thread, DST type, 60 cone
Reduction adaptor with metric male thread, RDST

type, 60 cone
code
(galv. steel)
spanner size
[mm]
thread size
[mm]
code
(galv. steel)
spanner
size
[mm]
1
thread size
[mm]
2
thread size
[mm]
EC-122010
EC-122012
EC-122014
EC-122016
EC-122018
EC-122022
EC-122026
14
14
19
19
19
27
32
M10x1
M12x1,5
M14x1,5
M16x1,5
M18x1,5
M22x1,5
M26x1,5
EC-122050
EC-122052
EC-122054
EC-122056
EC-122060
EC-122065
EC-122070
12
17
17
22
22
24
27
M8x1
M10x1
M12x1,5
M12x1,5
M14x1,5
M16x1,5
M18x1,5
M10x1
M12x1,5
M14x1,5
M16x1,5
M16x1,5
M18x1,5
M22x1,5
Adaptor with BSP male thread, DST type, 60 cone
Reduction adaptor with BSP male thread, RDST type,

60 cone
code
(galv. steel)
spanner size
[mm]
thread size
[mm]
code
(galv. steel)
spanner
size
[mm]
1
thread size
[mm]
2
thread size
[mm]
EC-122100
EC-122102
EC-122104
EC-122106
EC-122108
EC-122110
EC-122112
14
19
22
27
28
32
41
1/8
1/4
3/8
1/2
5/8
3/4
1
EC-122140
EC-122142
EC-122144
EC-122146
EC-122148
EC-122150
EC-122152
EC-122154
EC-122156
EC-122158
19
24
22
27
28
27
30
32
32
41
1/8
1/8
1/4
1/4
3/8
3/8
1/2
1/2
5/8
3/4
1/4
3/8
3/8
1/2
5/8
1/2
5/8
3/4
3/4
1
513

Fittings and connectors - NA type
Fittings and hose connectors designed for control systems, liquid and gas transportation systems, vacuum
applications, etc. Fittings made of polyamide (PA6), hose connectors of acetal polyoxymethylene (POM). Fittings
with NPT thread are available on request.
Straight fitting with male thread
Tee connector
710
720
code
(polyamide)
thread
size
hose I.D.
[mm]
flow DN
[mm]
code
(polyamide)
thread
size
hose I.D.
[mm]
flow DN
[mm]
NA-7100052003
NA-7100001004
NA-7100002004
NA-7100003004
NA-7100004004
NA-7100005004
NA-7100010004
NA-7100011004
NA-7100004005
NA-7100005005
NA-7100011005
NA-7100003006
NA-7100004006
NA-7100005006
NA-7100010006
NA-7100011006
NA-7100012006
NA-7100003008
NA-7100004008
NA-7100005008
NA-7100007008
NA-7100049008
NA-7100009008
NA-7100010008
NA-7100011008
NA-7100012008
NA-7100013008
NA-7100004010
NA-7100005010
NA-7100006010
NA-7100011010
NA-7100012010
NA-7100006012
NA-7100007012
NA-7100049012
NA-7100009012
NA-7100012012
NA-7100013012
NA-7100007014
NA-7100008014
NA-7100019014
NA-7100012014
NA-7100013014
NA-7100009016
NA-7100013016
NA-7100014016
NA-7100009019
NA-7100014019
NA-7100015025
M5
M8x1
M8x1,25
M10x1
M12x1,5
M14x1,5
1/8 BSPT
1/4 BSPT
M12x1,5
M14x1,5
1/4 BSPT
M10x1
M12x1,5
M14x1,5
1/8 BSPT
1/4 BSPT
3/8 BSPT
M10x1
M12x1,5
M14x1,5
M18x1,5
M22x1,5
M26x1,5
1/8 BSPT
1/4 BSPT
3/8 BSPT
1/2 BSPT
M12x1,5
M14x1,5
M16x1,5
1/4 BSPT
3/8 BSPT
M16x1,5
M18x1,5
M22x1,5
M26x1,5
3/8 BSPT
1/2 BSPT
M18x1,5
M20x1,5
M22x1,5
3/8 BSPT
1/2 BSPT
M26x1,5
1/2 BSPT
3/4 BSPT
M26x1,5
3/4 BSPT
1 BSPT
3
4
4
4
4
4
4
4
5
5
5
6
6
6
6
6
6
8
8
8
8
8
8
8
8
8
8
10
10
10
10
10
12
12
12
12
12
12
14
14
14
14
14
16
16
16
19
19
25
2,5
2,5
2,5
2,5
2,5
2,5
2,5
2,5
3
3
3
4
4
4
4
4
4
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
5,6
7
7
7
7
7
8,6
8,6
8,6
8,6
8,6
8,6
10
10
10
10
10
12
12
12
15
15
21
NA-7200001004
NA-7200003004
NA-7200004004
NA-7200005004
NA-7200010004
NA-7200011004
NA-7200003006
NA-7200004006
NA-7200010006
NA-7200011006
NA-7200004008
NA-7200005008
NA-7200011008
NA-7200012010
M8x1
M10x1
M12x1,5
M14x1,5
1/8 BSPT
1/4 BSPT
M10x1
M12x1,5
1/8 BSPT
1/4 BSPT
M12x1,5
M14x1,5
1/4 BSPT
3/8 BSPT
4
4
4
4
4
4
6
6
6
6
8
8
8
10
2,5
2,5
2,9
2,5
2,5
2,5
4
4
4
4
5,6
5,6
5,6
7
514
Straight hose connector
750
code
(POM)
hose I.D.
[mm]
flow DN
[mm]
NA-7500000003
NA-7500000004
NA-7500000005
NA-7500000006
NA-7500000008
NA-7500000010
NA-7500000012
NA-7500000013
NA-7500000014
NA-7500000016
NA-7500000019
NA-7500000025
3
4
5
6
8
10
12
13
14
16
19
25
2,5
2,7
3
4
5,6
7
8,6
8,6
10
12
15
21

Fittings and connectors - NA type
90 elbow hose connector
Tee (Y-shaped) hose connector
762
770
code
(POM)
hose I.D.
[mm]
flow DN
[mm]
code
(POM)
hose I.D.
[mm]
flow DN
[mm]
NA-7620000003
NA-7620000004
NA-7620000005
NA-7620000006
NA-7620000008
NA-7620000010
NA-7620000012
NA-7620000013
NA-7620000014
NA-7620000015
NA-7620000016
NA-7620000019
NA-7620000025
3
4
5
6
8
10
12
13
14
15
16
19
25
2,5
2,5
3
4
5,6
7
8,6
8,6
10
11
12
15
21
NA-7700000003
NA-7700000004
NA-7700000005
NA-7700000006
NA-7700000008
NA-7700000010
NA-7700000012
NA-7700000013
NA-7700000014
NA-7700000016
NA-7700000019
3
4
5
6
8
10
12
13
14
16
19
2,5
2,5
3
4
5,6
7
8,6
9
10
12
15
Tee (T-shaped) hose connector
Cross hose connector
760
772
code
(POM)
hose I.D.
[mm]
flow DN
[mm]
code
(POM)
hose I.D.
[mm]
flow DN
[mm]
NA-7600000003
NA-7600000004
NA-7600000005
NA-7600000006
NA-7600000007
NA-7600000008
NA-7600000010
NA-7600000012
NA-7600000013
NA-7600000014
NA-7600000015
NA-7600000016
NA-7600000019
NA-7600000025
3
4
5
6
7
8
10
12
13
14
15
16
19
25
2,5
2,7
3
4
5
5,6
7
8,6
8,6
10
11
12
15
21
NA-7720000004
NA-7720000005
NA-7720000006
NA-7720000012
4
5
6
12
2,9
3
4
8,6
515

Fittings and hose connectors - EM type (3T series) PN 10 bar
Fittings and hose connectors made of polypropylene, PVDF, PTFE are widely used in laboratory and medicine as
well as pharmaceutical, chemical and food industry. Designed for hoses made of plastic materials (see chapters:
TYGON, silicone hoses). Available with BSP or NPT threads.
description
Straight fitting BSP female
code
(polypropylene)
code
(PVDF)
code
(PTFE)
thread
size
[inch]
hose
I.D.
[mm]
EM-PWB3T-02-04PP
EM-PWB3T-02-04PV
EM-PWB3T-02-04PT
1/8
EM-PWB3T-04-06PP
EM-PWB3T-04-06PV
1/4
EM-PWB3T-06-08PP
EM-PWB3T-06-08PV
3/8
EM-PWB3T-06-10PP
EM-PWB3T-06-10PV
EM-PWB3T-06-10PT
3/8
10
EM-PWB3T-08-12PP
EM-PWB3T-08-12PV
1/2
12
EM-PWB3T-08-14PP
EM-PWB3T-08-14PV
1/2
14
EM-PWB3T-08-16PP
EM-PWB3T-08-16PT
1/2
16
- exemplary code for NPT thread version:

description
Straight fitting BSP male
EM-PWN-02-04PP
code
(polypropylene)
code
(PVDF)
code
(PTFE)
thread
size
[inch]
hose
I.D.
[mm]
EM-PZB3T-02-04PP
EM-PZB3T-02-04PV
EM-PZB3T-02-04PT
1/8
EM-PZB3T-04-06PP
EM-PZB3T-04-06PV
EM-PZB3T-04-06PT
1/4
EM-PZB3T-06-08PP
EM-PZB3T-06-08PV
EM-PZB3T-06-08PT
3/8
EM-PZB3T-06-10PP
EM-PZB3T-06-10PV
EM-PZB3T-06-10PT
3/8
10
EM-PZB3T-08-12PP
EM-PZB3T-08-12PV
EM-PZB3T-08-12PT
1/2
12
EM-PZB3T-08-14PP
EM-PZB3T-08-14PV
EM-PZB3T-08-14PT
1/2
14
EM-PZB3T-08-16PP
EM-PZB3T-08-16PV
EM-PZB3T-08-16PT
1/2
16
EM-PZN-02-04PP
description
code
(polypropylene)
code
(PVDF)
code
(PTFE)
thread
size
[inch]
hose
I.D.
[mm]
90 elbow fitting BSP female
EM-KWB3T-02-04PP
1/8
EM-KWB3T-04-06PP
EM-KWB3T-04-06PV
1/4
EM-KWB3T-06-08PP
EM-KWB3T-06-08PV
3/8
EM-KWB3T-06-10PP
3/8
10
EM-KWB3T-08-12PP
EM-KWB3T-08-12PV
1/2
12
EM-KWN-02-04PP
description
code
(polypropylene)
code
(PVDF)
code
(PTFE)
thread
size
[inch]
hose
I.D.
[mm]
90 elbow fitting BSP male
EM-KZB3T-02-04PP
EM-KZB3T-02-04PV
EM-KZB3T-02-04PT
1/8
EM-KZB3T-04-06PP
EM-KZB3T-04-06PV
EM-KZB3T-04-06PT
1/4
EM-KZB3T-06-08PP
EM-KZB3T-06-08PV
EM-KZB3T-06-08PT
3/8
EM-KZB3T-06-10PP
EM-KZB3T-06-10PV
EM-KZB3T-06-10PT
3/8
10
EM-KZB3T-08-12PP
EM-KZB3T-08-12PV
1/2
12
516
EM-KZN-02-04PP

Fittings and hose connectors - EM type (3T series) PN 10 bar
description
Straight hose connector
description
90 elbow hose connector
description
Tee hose connector
code
(polypropylene)
code
(PVDF)
code
(PTFE)
hose I.D.
[mm]
EM-LP3T-04PP
EM-LP3T-04PV
EM-LP3T-04PT
EM-LP3T-06PP
EM-LP3T-06PV
EM-LP3T-06PT
EM-LP3T-08PP
EM-LP3T-08PV
EM-LP3T-08PT
EM-LP3T-10PP
EM-LP3T-10PV
EM-LP3T-10PT
10
EM-LP3T-12PP
EM-LP3T-12PV
EM-LP3T-12PT
12
code
(polypropylene)
code
(PVDF)
code
(PTFE)
hose I.D.
[mm]
EM-LK3T-04PP
EM-LK3T-04PV
EM-LK3T-04PT
EM-LK3T-06PP
EM-LK3T-06PV
EM-LK3T-06PT
EM-LK3T-08PP
EM-LK3T-08PV
EM-LK3T-08PT
EM-LK3T-10PP
EM-LK3T-10PV
EM-LK3T-10PT
10
EM-LK3T-12PP
EM-LK3T-12PV
EM-LK3T-12PT
12
code
(polypropylene)
code
(PVDF)
code
(PTFE)
hose I.D.
[mm]
EM-LT3T-04PP
EM-LT3T-04PV
EM-LT3T-04PT
EM-LT3T-06PP
EM-LT3T-06PV
EM-LT3T-06PT
EM-LT3T-08PP
EM-LT3T-08PV
EM-LT3T-08PT
EM-LT3T-10PP
EM-LT3T-10PV
EM-LT3T-10PT
10
EM-LT3T-12PP
EM-LT3T-12PV
EM-LT3T-12PT
12
517

Fittings and hose connectors - EM type (3F series) PN 10 bar
Plastic fittings and hose connectors made of polypropylene and PVDF are widely used in laboratory and medicine
as well as pharmaceutical, chemical and food industry. Available with BSP, NPT and metric threads.
description
Straight connector BSP male
description

/ female
description
Straight connector BSP female
description
Blank plug BSP male
description
Blank cap BSP female
518
code
(polypropylene)
code
(PVDF)
thread size
[mm]
EM-LPZZB3F-02PP
EM-LPZZB3F-04PP
EM-LPZZB3F-06PP
EM-LPZZB3F-08PP
EM-LPZZB3F-12PP
EM-LPZZB3F-16PP
EM-LPZZB3F-20PP
EM-LPZZB3F-24PP
-
EM-LPZZB3F-02PV
EM-LPZZB3F-04PV
EM-LPZZB3F-06PV
EM-LPZZB3F-08PV
EM-LPZZB3F-12PV
EM-LPZZB3F-16PV
EM-LPZZB3F-20PV
EM-LPZZB3F-24PV
EM-LPZZB3F-32PV
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
code
(polypropylene)
code
(PVDF)
thread size
[mm]
EM-LPZWB3F-02PP
EM-LPZWB3F-04PP
EM-LPZWB3F-06PP
EM-LPZWB3F-08PP
EM-LPZWB3F-12PP
EM-LPZWB3F-16PP
EM-LPZWB3F-20PP
EM-LPZWB3F-24PP
EM-LPZWB3F-32PP
EM-LPZWB3F-02PV
EM-LPZWB3F-04PV
EM-LPZWB3F-06PV
EM-LPZWB3F-08PV
EM-LPZWB3F-12PV
EM-LPZWB3F-16PV
EM-LPZWB3F-20PV
EM-LPZWB3F-24PV
-
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
code
(polypropylene)
code
(PVDF)
thread size
[mm]
EM-LPWWB3F-02PP
EM-LPWWB3F-04PP
EM-LPWWB3F-06PP
EM-LPWWB3F-08PP
EM-LPWWB3F-12PP
EM-LPWWB3F-16PP
EM-LPWWB3F-20PP
EM-LPWWB3F-24PP
EM-LPWWB3F-32PP
EM-LPWWB3F-02PV
EM-LPWWB3F-04PV
EM-LPWWB3F-06PV
EM-LPWWB3F-08PV
EM-LPWWB3F-12PV
EM-LPWWB3F-16PV
-
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
code
(polypropylene)
code
(PVDF)
thread size
[mm]
EM-ZZB3F-02PP
EM-ZZB3F-04PP
EM-ZZB3F-06PP
EM-ZZB3F-08PP
EM-ZZB3F-12PP
EM-ZZB3F-16PP
EM-ZZB3F-20PP
EM-ZZB3F-24PP
EM-ZZB3F-02PV
EM-ZZB3F-04PV
EM-ZZB3F-06PV
EM-ZZB3F-08PV
EM-ZZB3F-12PV
EM-ZZB3F-16PV
-
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
code
(polypropylene)
code
(PVDF)
thread size
[mm]
EM-ZWB3F-02PP
EM-ZWB3F-04PP
EM-ZWB3F-06PP
EM-ZWB3F-08PP
EM-ZWB3F-12PP
EM-ZWB3F-16PP
EM-ZWB3F-24PP
EM-ZWB3F-02PV
EM-ZWB3F-04PV
EM-ZWB3F-06PV
EM-ZWB3F-08PV
EM-ZWB3F-12PV
EM-ZWB3F-20PV
-
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2

Fittings and hose connectors - EM type (1A series) PN 10 bar
as well as pharmaceutical, chemical and food industry. Designed for metric plastic hoses (see chapters: PTFE
hoses, Pneumatics). Available with BSP and NPT threads.
description
Straight connector
description
Straight reduction connector
description
Straight fitting with BSP male
description
Straight fitting with BSP

female
code
(polypropylene)
code
(PVDF)
hose I.D. x O.D

[mm]
EM-LP1A-04/06PP
EM-LP1A-05/08PP
EM-LP1A-06/08PP
EM-LP1A-06/10PP
EM-LP1A-08/10PP
EM-LP1A-08/12PP
EM-LP1A-10/12PP
EM-LP1A-10/14PP
EM-LP1A-12/14PP
EM-LP1A-12/16PP
EM-LP1A-04/06PV
EM-LP1A-05/08PV
EM-LP1A-06/08PV
EM-LP1A-06/09PV
EM-LP1A-06/10PV
EM-LP1A-08/10PV
EM-LP1A-08/12PV
EM-LP1A-10/12PV
EM-LP1A-10/14PV
EM-LP1A-12/14PV
EM-LP1A-12/16PV
4x6
5x8
6x8
6x9
6x10
8x10
8x12
10x12
10x14
12x14
12x16
code
(polypropylene)
code
(PVDF)
hose I.D. x O.D

[mm]
EM-LPR1A-06/08-04/06PP
EM-LPR1A-06/08-05/08PP
EM-LPR1A-06/08-08/10PP
EM-LPR1A-06/10-04/06PP
EM-LPR1A-08/10-04/06PP
EM-LPR1A-08/10-10/12PP
EM-LPR1A-10/12-04/06PP
EM-LPR1A-10/12-06/08PP
EM-LPR1A-10/12-12/14PP
EM-LPR1A-06/08-04/06PV
EM-LPR1A-06/08-05/08PV
EM-LPR1A-06/08-08/10PV
EM-LPR1A-06/10-04/06PV
EM-LPR1A-06/10-06/08PV
EM-LPR1A-08/10-04/06PV
EM-LPR1A-08/10-10/12PV
EM-LPR1A-10/12-04/06PV
EM-LPR1A-10/12-06/08PV
EM-LPR1A-10/12-12/14PV
6x8 / 4x6
6x8 / 5x8
6x8 / 8x10
6x10 / 4x6
6x10 / 6x8
8x10 / 4x6
8x10 / 10x12
10x12 / 4x6
10x12 / 6x8
10x12 / 12x14
code
(polypropylene)
code
(PVDF)
thread size
[inch]
hose I.D. x O.D

[mm]
EM-KZB1A-02-04/06PP
EM-KZB1A-04-04/06PP
EM-KZB1A-06-04/06PP
EM-KZB1A-08-04/06PP
EM-KZB1A-02-06/08PP
EM-KZB1A-04-06/08PP
EM-KZB1A-06-06/08PP
EM-KZB1A-08-06/08PP
EM-KZB1A-02-08/10PP
EM-KZB1A-04-08/10PP
EM-KZB1A-06-08/10PP
EM-KZB1A-08-08/10PP
EM-KZB1A-02-04/06PV
EM-KZB1A-04-04/06PV
EM-KZB1A-06-04/06PV
EM-KZB1A-08-04/06PV
EM-KZB1A-02-06/08PV
EM-KZB1A-04-06/08PV
EM-KZB1A-06-06/08PV
EM-KZB1A-08-06/08PV
EM-KZB1A-02-08/10PV
EM-KZB1A-04-08/10PV
EM-KZB1A-06-08/10PV
EM-KZB1A-08-08/10PV
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
4x6
4x6
4x6
4x6
6x8
6x8
6x8
6x8
8x10
8x10
8x10
8x10
code
(polypropylene)
code
(PVDF)
thread size
[inch]
hose I.D. x O.D

[mm]
EM-KWB1A-02-04/06PP
EM-KWB1A-04-04/06PP
EM-KWB1A-06-04/06PP
EM-KWB1A-08-04/06PP
EM-KWB1A-02-06/08PP
EM-KWB1A-04-06/08PP
EM-KWB1A-06-06/08PP
EM-KWB1A-08-06/08PP
EM-KWB1A-02-08/10PP
EM-KWB1A-04-08/10PP
EM-KWB1A-06-08/10PP
EM-KWB1A-08-08/10PP
EM-KWB1A-02-04/06PV
EM-KWB1A-04-04/06PV
EM-KWB1A-06-04/06PV
EM-KWB1A-08-04/06PV
EM-KWB1A-02-06/08PV
EM-KWB1A-04-06/08PV
EM-KWB1A-06-06/08PV
EM-KWB1A-08-06/08PV
EM-KWB1A-02-08/10PV
EM-KWB1A-04-08/10PV
EM-KWB1A-06-08/10PV
EM-KWB1A-08-08/10PV
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
4x6
4x6
4x6
4x6
6x8
6x8
6x8
6x8
8x10
8x10
8x10
8x10
519

Fittings and hose connectors - EM type (1B series) PN 10 bar
as well as pharmaceutical, chemical and food industry. Designed for plastic hoses reinforced with braid. Available
with BSP and NPT threads.
description
Straight connector
description
Straight fitting with BSP male
description
Straight fitting with BSP

female
520
code
(polypropylene)
code
(PVDF)
hose I.D. x O.D

[mm]
EM-LP1B-04/10PP
EM-LP1B-05/11PP
EM-LP1B-06/12PP
EM-LP1B-08/14PP
EM-LP1B-09/15PP
EM-LP1B-10/16PP
EM-LP1B-12/18PP
EM-LP1B-13/19PP
EM-LP1B-13/20PP
EM-LP1B-19/27PP
EM-LP1B-04/10PV
EM-LP1B-05/11PV
EM-LP1B-06/12PV
EM-LP1B-08/14PV
EM-LP1B-09/15PV
EM-LP1B-10/16PV
EM-LP1B-12/18PV
EM-LP1B-13/19PV
EM-LP1B-13/20PV
EM-LP1B-19/27PV
4x10
5x11
6x12
8x14
9x15
10x16
12x18
13x19
13x20
19x27
code
(polypropylene)
code
(PVDF)
thread size
[inch]
hose I.D. x O.D

[mm]
EM-KZB1B-02-10PP
EM-KZB1B-04-10PP
EM-KZB1B-06-10PP
EM-KZB1B-08-10PP
EM-KZB1B-12-10PP
EM-KZB1B-02-12PP
EM-KZB1B-04-12PP
EM-KZB1B-06-12PP
EM-KZB1B-08-12PP
EM-KZB1B-12-12PP
EM-KZB1B-02-14PP
EM-KZB1B-04-14PP
EM-KZB1B-06-14PP
EM-KZB1B-08-14PP
EM-KZB1B-12-14PP
EM-KZB1B-02-15PP
EM-KZB1B-04-15PP
EM-KZB1B-06-15PP
EM-KZB1B-08-15PP
EM-KZB1B-12-15PP
EM-KZB1B-02-10PV
EM-KZB1B-04-10PV
EM-KZB1B-06-10PV
EM-KZB1B-08-10PV
EM-KZB1B-02-12PV
EM-KZB1B-04-12PV
EM-KZB1B-06-12PV
EM-KZB1B-08-12PV
EM-KZB1B-12-12PV
EM-KZB1B-04-14PV
EM-KZB1B-06-14PV
EM-KZB1B-08-14PV
EM-KZB1B-02-15PV
EM-KZB1B-04-15PV
EM-KZB1B-06-15PV
EM-KZB1B-08-15PV
EM-KZB1B-12-15PV
1/8
1/4
3/8
1/2
3/4
1/8
1/4
3/8
1/2
3/4
1/8
1/4
3/8
1/2
3/4
1/8
1/4
3/8
1/2
3/4
4x10
4x10
4x10
4x10
4x10
6x12
6x12
6x12
6x12
6x12
8x14
8x14
8x14
8x14
8x14
9x15
9x15
9x15
9x15
9x15
code
(polypropylene)
code
(PVDF)
thread size
[inch]
hose I.D. x O.D

[mm]
EM-KWB1B-06-10PP
EM-KWB1B-08-10PP
EM-KWB1B-04-12PP
EM-KWB1B-06-12PP
EM-KWB1B-08-12PP
EM-KWB1B-12-12PP
EM-KWB1B-04-14PP
EM-KWB1B-06-14PP
EM-KWB1B-08-14PP
EM-KWB1B-12-14PP
EM-KWB1B-06-15PP
EM-KWB1B-08-15PP
EM-KWB1B-12-15PP
EM-KWB1B-02-10PV
EM-KWB1B-04-10PV
EM-KWB1B-06-10PV
EM-KWB1B-04-12PV
EM-KWB1B-06-12PV
EM-KWB1B-08-12PV
EM-KWB1B-06-14PV
EM-KWB1B-08-14PV
EM-KWB1B-02-15PV
EM-KWB1B-04-15PV
EM-KWB1B-06-15PV
EM-KWB1B-08-15PV
EM-KWB1B-12-15PV
1/8
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1/4
3/8
1/2
3/4
1/8
1/4
3/8
1/2
3/4
4x10
4x10
4x10
4x10
6x12
6x12
6x12
6x12
8x14
8x14
8x14
8x14
9x15
9x15
9x15
9x15
9x15

Brass connectors - AI 13000 type
General purpose connectors with cutting ring of a symmetric shape, designed to connect copper, brass, steel,
aluminium pipes, etc. as well as plastic pipes and hoses (e.g. polyamide) in accordance to EN 1254-2 standard.
Body, nut and ring made of brass. Pipe O.D., capable of being connected, from 4 to 22 mm. Sealing of the
connection is obtained by cutting ring biting into the pipe and simultaneously pressing the pipe (with cutting ring)
against the socket with the use of nut. Array of connectors designed to connect pipes (straight connectors, elbows,
tees, crosses), stud couplings to be screwed into the body (straight, elbow, tee, BANJO), adaptors, cutting rings,
nuts and others. General purpose brass connectors designed for water, air, oil, fuels, etc. especially applied in
installations built of brass pipes.
Maximum working pressure for connection of brass pipes with wall thickness of 1 mm
(pre-set safety factor 4:1, temperature +20C)
pipe O.D.
[mm]
10
12
14
16
18
22
working press.
[bar]
150
150
135
95
75
100
95
70
70
Note: for pipes and hoses made of different materials, tests in real working conditions are recommended, taking
the influence of working temperature into consideration.
Connector (body)
with BSPT thread
Cutting
ring
Nut with
metric thread
CONNECTOR AFTER ASSEMBLY

Attention: for flexible hoses, reinforcing ferrule is
recommended. For bended pipes, straight piece
of the pipe (min. 2x height of the nut) should be
retained - measured from nut after assembly.
Copper, brass, steel, aluminium pipe

or flexible hose
ASSEMBLY OF CONNECTOR ON PIPE

1. Pipe must be cut off at the right angle.
2. Put mineral oil on outside thread, ring and
inside thread.
3. Insert the pipe into the connector, put ring
and nut, screw the nut by hand.
4. Be sure the pipe reached the bottom of
connector.
5. Screw the nut by 1 and 1/4 turn.
6. Unscrew the nut, take the pipe out, check
the position of cutting ring.
7. Screw the connection with a spanner by
additional 1/4 turn.
521

Straight connector
90 elbow connector
13460
13260
code
pipe O.D.
[mm]
spanner size
[mm]
code
pipe O.D.
[mm]
spanner size
[mm]
AI-13460-04
AI-13460-06
AI-13460-08
AI-13460-10
AI-13460-12
AI-13460-14
AI-13460-15
AI-13460-16
AI-13460-18
AI-13460-22
4
6
8
10
12
14
15
16
18
22
10
11
13
16
18
21
21
22
26
30
AI-13260-04
AI-13260-06
AI-13260-08
AI-13260-10
AI-13260-12
AI-13260-14
AI-13260-15
AI-13260-16
AI-13260-18
AI-13260-22
4
6
8
10
12
14
15
16
18
22
8
9
11
13
14
17
17
17
20
27
Tee connector
Cross connector
13200
code
pipe O.D.
[mm]
spanner size
[mm]
AI-13200-04
AI-13200-06
AI-13200-08
AI-13200-10
AI-13200-12
AI-13200-14
AI-13200-15
AI-13200-16
AI-13200-18
AI-13200-22
4
6
8
10
12
14
15
16
18
22
8
9
12
13
14
18
18
17
20
27
522
13510
code
pipe O.D.
[mm]
spanner size
[mm]
AI-13510-04
AI-13510-06
AI-13510-08
AI-13510-10
AI-13510-12
AI-13510-14
4
6
8
10
12
14
8
9
11
13
17
17

Straight connector BSPT male
Straight connector BSP female
13480
code
pipe O.D.
[mm]
thread
size
[inch]
spanner
size
[mm]
AI-13480-04-02
AI-13480-04-04
AI-13480-06-02
AI-13480-06-04
AI-13480-06-06
AI-13480-08-02
AI-13480-08-04
AI-13480-08-06
AI-13480-10-04
AI-13480-10-06
AI-13480-10-08
AI-13480-12-04
AI-13480-12-06
AI-13480-12-08
AI-13480-14-06
AI-13480-14-08
AI-13480-15-08
AI-13480-16-08
AI-13480-16-12
AI-13480-18-08
AI-13480-18-12
AI-13480-22-08
AI-13480-22-12
4
4
6
6
6
8
8
8
10
10
10
12
12
12
14
14
15
16
16
18
18
22
22
1/8
1/4
1/8
1/4
3/8
1/8
1/4
3/8
1/4
3/8
1/2
1/4
3/8
1/2
3/8
1/2
1/2
1/2
3/4
1/2
3/4
1/2
3/4
11
14
11
14
17
13
14
17
16
17
21
18
18
21
20
21
21
22
27
24
27
30
30
13500
code
pipe O.D.
[mm]
thread
size
[inch]
spanner
size
[mm]
AI-13500-04-02
AI-13500-04-04
AI-13500-06-02
AI-13500-06-04
AI-13500-08-02
AI-13500-08-04
AI-13500-08-06
AI-13500-10-04
AI-13500-10-06
AI-13500-10-08
AI-13500-12-04
AI-13500-12-06
AI-13500-12-08
AI-13500-14-06
AI-13500-14-08
AI-13500-15-08
AI-13500-16-08
AI-13500-16-12
AI-13500-18-08
AI-13500-18-12
AI-13500-22-12
4
4
6
6
8
8
8
10
10
10
12
12
12
14
14
15
16
16
18
18
22
1/8
1/4
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
1/4
3/8
1/2
3/8
1/2
1/2
1/2
3/4
1/2
3/4
3/4
14
17
14
17
14
17
20
17
20
24
18
20
24
20
24
24
24
30
24
30
30
Straight pipe connector BSP male
13485
code
pipe O.D.
[mm]
thread
size
[inch]
spanner
size
[mm]
AI-13485-04-02
AI-13485-06-02
AI-13485-06-04
AI-13485-08-02
AI-13485-08-04
AI-13485-08-06
AI-13485-10-04
AI-13485-10-06
AI-13485-14-06
AI-13485-14-08
AI-13485-22-12
AI-13485-22-16
4
6
6
8
8
8
10
10
14
14
22
22
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
3/8
1/2
3/4
1
13
13
17
13
17
22
17
22
22
27
32
40
13530
code
pipe O.D.
[mm]
thread
size
[inch]
spanner
size
[mm]
AI-13530-06-02
AI-13530-06-04
AI-13530-08-02
AI-13530-08-04
AI-13530-08-06
AI-13530-10-04
AI-13530-10-06
AI-13530-14-06
AI-13530-14-08
6
6
8
8
8
10
10
14
14
1/8
1/4
1/8
1/4
3/8
1/4
3/8
3/8
1/2
13
17
13
17
22
17
22
22
27
523

Tee connector (T type) BSPT male
Tee connector (T type) BSP female
13220
code
pipe O.D.
[mm]
thread
size
[inch]
spanner
size
[mm]
AI-13220-04-02
AI-13220-06-02
AI-13220-06-04
AI-13220-08-02
AI-13220-08-04
AI-13220-08-06
AI-13220-10-04
AI-13220-10-06
AI-13220-10-08
AI-13220-12-04
AI-13220-12-06
AI-13220-12-08
AI-13220-14-06
AI-13220-14-08
AI-13220-15-08
AI-13220-16-08
AI-13220-18-08
AI-13220-18-12
AI-13220-22-12
4
6
6
8
8
8
10
10
10
12
12
12
14
14
15
16
18
18
22
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
1/4
3/8
1/2
3/8
1/2
1/2
1/2
1/2
3/4
3/4
8
9
9
12
12
13
13
13
14
14
14
14
16
18
18
17
20
20
27
Tee connector (L type) BSPT male
13240
code
pipe O.D.
[mm]
thread
size
[inch]
spanner
size
[mm]
AI-13240-04-02
AI-13240-06-02
AI-13240-06-04
AI-13240-08-02
AI-13240-08-04
AI-13240-10-04
AI-13240-10-06
AI-13240-10-08
AI-13240-12-04
AI-13240-12-06
AI-13240-12-08
AI-13240-14-08
AI-13240-15-08
AI-13240-16-08
AI-13240-18-08
AI-13240-18-12
4
6
6
8
8
10
10
10
12
12
12
14
15
16
18
18
1/8
1/8
1/4
1/8
1/4
1/4
3/8
1/2
1/4
3/8
1/2
1/2
1/2
1/2
1/2
3/4
8
9
13
12
13
13
14
15
14
14
15
18
18
17
20
20
BANJO connector BSP male
13230
code
pipe O.D.
[mm]
thread
size
[inch]
spanner
size
[mm]
AI-13230-04-02
AI-13230-06-02
AI-13230-06-04
AI-13230-08-02
AI-13230-08-04
AI-13230-08-06
AI-13230-10-04
AI-13230-10-06
AI-13230-12-06
AI-13230-12-08
AI-13230-14-08
4
6
6
8
8
8
10
10
12
12
14
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
3/8
1/2
1/2
8
9
9
12
12
13
13
13
14
15
18
524
13550
code
pipe O.D.
[mm]
thread
size
[inch]
spanner
size
[mm]
AI-13550-04-02
AI-13550-06-02
AI-13550-06-04
AI-13550-08-02
AI-13550-08-04
AI-13550-08-06
AI-13550-10-04
AI-13550-10-06
AI-13550-14-04
AI-13550-14-06
AI-13550-14-08
AI-13550-22-12
4
6
6
8
8
8
10
10
14
14
14
22
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/4
3/8
1/2
3/4
14
14
17
14
17
19
17
19
17
22
24
32

90 elbow connector BSPT male
90 elbow connector BSP female
13280
code
pipe O.D.
[mm]
thread
size
[inch]
spanner
size
[mm]
AI-13280-04-02
AI-13280-06-02
AI-13280-06-04
AI-13280-08-02
AI-13280-08-04
AI-13280-08-06
AI-13280-10-04
AI-13280-10-06
AI-13280-10-08
AI-13280-12-04
AI-13280-12-06
AI-13280-12-08
AI-13280-14-06
AI-13280-14-08
AI-13280-15-08
AI-13280-16-08
AI-13280-18-08
AI-13280-18-12
AI-13280-22-12
4
6
6
8
8
8
10
10
10
12
12
12
14
14
15
16
18
18
22
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
1/4
3/8
1/2
3/8
1/2
1/2
1/2
1/2
3/4
3/4
8
9
9
11
11
13
13
13
14
14
14
14
17
17
17
17
20
20
27
Straight pipe connector with hose tail
13290
code
pipe O.D.
[mm]
thread
size
[inch]
spanner
size
[mm]
AI-13290-04-02
AI-13290-06-02
AI-13290-06-04
AI-13290-08-02
AI-13290-08-04
AI-13290-08-06
AI-13290-10-04
AI-13290-10-06
AI-13290-10-08
AI-13290-12-04
AI-13290-12-06
AI-13290-12-08
AI-13290-14-08
AI-13290-15-08
AI-13290-16-08
AI-13290-18-08
AI-13290-18-12
4
6
6
8
8
8
10
10
10
12
12
12
14
15
16
18
18
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
1/4
3/8
1/2
1/2
1/2
1/2
1/2
3/4
8
9
11
11
13
14
13
14
15
14
14
15
18
18
18
20
20
Nut
13540
code
pipe O.D.
[mm]
spanner size
[mm]
AI-13540-06-07
AI-13540-08-07
AI-13540-08-10
AI-13540-10-07
AI-13540-10-10
AI-13540-12-10
AI-13540-12-13
AI-13540-14-13
6
8
8
10
10
12
12
14
7
7
10
7
10
10
13
13
13680
code
pipe O.D.
[mm]
thread
size
[mm]
spanner
size
[mm]
AI-13680-04
AI-13680-06
AI-13680-08
AI-13680-10
AI-13680-12
AI-13680-14
AI-13680-15
AI-13680-16
AI-13680-18
AI-13680-22
4
6
8
10
12
14
15
16
18
22
M8x1
M10x1
M12x1
M16x1,5
M18x1,5
M20x1,5
M20x1,5
M22x1,5
M24x1,5
M30x1,5
10
13
14
19
22
24
24
27
30
36
525

Ring
Blank cap
13740
13780
code
pipe O.D.
[mm]
height
[mm]
code
pipe O.D.
[mm]
length
[mm]
AI-13740-04
AI-13740-06
AI-13740-08
AI-13740-10
AI-13740-12
AI-13740-14
AI-13740-15
AI-13740-16
AI-13740-18
AI-13740-22
4
6
8
10
12
14
15
16
18
22
6
6,5
7
8
8,5
8,5
8,5
9
9,5
10
AI-13780-04
AI-13780-06
AI-13780-08
AI-13780-10
AI-13780-12
AI-13780-14
AI-13780-15
AI-13780-16
AI-13780-18
AI-13780-22
4
6
8
10
12
14
15
16
18
22
10
10,5
10,5
11,5
12
14
14
14
16
15
Reinforcing ferrule
Reduction
10770
code
pipe
O.D. x I.D.
[mm]
O.D.
[mm]
I.D.
[mm]
AI-10770-04/2,7
AI-10770-06/04
AI-10770-08/06
AI-10770-10/08
AI-10770-12/09
AI-10770-12/10
AI-10770-14/12
AI-10770-15/12,5
AI-10770-16/13
AI-10770-18/15
AI-10770-18/16
AI-10770-22/18
4 x 2,7
6x4
8x6
10 x 8
12 x 9
12 x 10
14 x 12
15 x 12,5
16 x 13
18 x 15
18 x 16
22 x 18
2,7
4
6
8
9
10
12
12,5
13
15
16
18
1,5
3
5
7
8
9
11
11,5
12
14
15
16,5
526
13600
code
pipe O.D.
[mm]
pipe O.D.
[mm]
AI-13600-04-06
AI-13600-06-08
AI-13600-08-10
AI-13600-10-12
AI-13600-12-14
4
6
8
10
12
6
8
10
12
14

Fittings - AK type
picture
picture
picture
thread
size
[BSP]
flange
size
[mm]
hose I.D.
[inch]
flow
diameter
[mm]
AK-RVST13-C17-SP
1/2
17
1/2
10
AK-RVST13-C20-SP
1/2
20
1/2
10
AK-RVST16-C21-SP
1/2
21
5/8
13
AK-RVST19-C24-SP
1/2
24
3/4
14
thread
size
[BSPT]
flange
size
[mm]
hose I.D.
[inch]
flow
diameter
[mm]
AK-SWIFB13-C17
1/2
17
1/2
10
AK-SWIFB13-C20
1/2
20
1/2
10
AK-SWIFB13-C20-SP*
1/2
20
1/2
10
Swivel fitting
male thread.
AK-SWIFB16-C21
1/2
21
5/8
13

Working press.: to 40 bar.
AK-SWIFB16-C21SP*
1/2
21
5/8
13
* - with 200 mm hose protection spring.
AK-SWIFB19-C24
1/2
24
3/4
14
AK-SWIFB19-C24SP*
1/2
24
3/4
14
code
female
thread
size
male
thread
size
flow
diameter
[mm]
material
code
code
AK-SWM-09-1/2
1/2
1/2
AK-SWM-09-3/4
3/4
1/2
AK-SWM-12-3/4
3/4
3/4
12
AK-SWM-14-3/4
3/4
1/2
14
18
AK-SWR-09-1/2
1/2
1/2
AK-SWR-09-3/4
3/4
1/2
AK-SWM-18-1
AK-SWR-12-3/4
3/4
3/4
12
AK-SWR-14-3/4
3/4
1/2
14
AK-SWR-18-1
18
AK-SWC-09-1/2
1/2
1/2
AK-SWC-09-3/4
3/4
1/2
AK-SWC-14-3/4
3/4
1/2
14
description
Fitting with BSP male

thread with 200 mm hose
protection spring.
description
with
NPT
description
brass
Swivel fitting with BSP female and BSP male thread.
stainless
steel
Seal:
- EPDM for brass
- Viton for stainless steel
brass
chromium
527

NiTO fittings and hose connectors
Material:
Brass
Fitting BSP male with hose tail
code
NT-27110A4
NT-27210A4
NT-27240A4
NT-27790A4
NT-27410A4
NT-27710A4
NT-27810A4
NT-27910A4
thread size
[inch]
1/2
3/4
3/4
3/4
1
1.1/4
1.1/2
2
Fitting BSP female with hose tail
hose I.D.
[inch]
1/2
3/4
1
1/2
1
1.1/4
1.1/2
2
Fitting BSP female with hose tail
code
NT-27450A4
NT-27550A4
NT-27650A4
NT-27750A4
NT-27850A4
NT-27950A4
thread size
[inch]
1
1
1
1.1/4
1.1/2
2
code
NT-27150A4
NT-2715AA4
NT-2715BA4
NT-2721MA4
NT-2722MA4
NT-27250A4
NT-27350A4
thread size
[inch]
1/2
M22x1
1/2
1/2
3/4
3/4
3/4
hose I.D.
[inch]
1/2
3/4
1/4
5/8
5/8
3/4
1/2
General purpose fitting BSP female with hose tail
hose I.D.
[inch]
1
1/2
3/4
1.1/4
1.1/2
2
thread size
[inch]
1/2
hose I.D.
[inch]
15 6,3
code
thread size
[inch]
dimensions
[mm]
NT-1-290A8
NT-1-300A8
NT-1-320A8
NT-1-900A8
NT-1-910A8
NT-1-920A8
1/2
3/4
1
1.1/4
1.1/2
2
18x12,4x2
23x16,7x2
29x23x2,5
38x29x2
44x34x2
55x45x2
code
NT-27L42A4
Seal
Screw-to-connect hose connector
code
NT-27160A4
NT-27260A4
NT-27360A4
528
thread size
[inch]
1/2
3/4
1/2
hose I.D.
[inch]
1/2
3/4
3/4

NiTO fittings and hose connectors
Fitting BSP male with hose tail
code
NT-2760AA4
NT-2764AA4
NT-2766AA4
NT-2760BA4
NT-2768BA4
NT-2764BA4
NT-2766BA4
NT-2764CA4
NT-2760CA4
NT-2766CA4
NT-2764DA4
NT-2768DA4
NT-2766DA4
NT-2760DA4
NT-2764NA4
NT-2766NA4
NT-2766EA4
NT-2760EA4
NT-2760FA4
NT-2760GA4
NT-2760HA4
NT-2760IA4
Fitting BSPT male with hose tail
thread size
[inch]
1/8
1/8
1/8
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
1
1.1/4
1.1/2
2
hose I.D.
code
1/8 (3,5 mm)

1/4 (6,5 mm)
3/8 (10,2 mm)
1/4 (6,5 mm)
5/16 (8,5 mm)
3/8 (10,2 mm)
1/2 (13,5 mm)
1/4 (6,5 mm)
3/8 (10,2 mm)
1/2 (13,5 mm)
1/4 (6,5 mm)
5/16 (8,5 mm)
3/8 (10,2 mm)
1/2 (13,5 mm)
5/8 (16,5 mm)
3/4 (19,5 mm)
1/2 (13,5 mm)
3/4 (19,5 mm)
1 (26 mm)
1.1/4 (32 mm)
1.1/2 39 mm)
2 (51 mm)
NT-2660AA4
NT-2664AA4
NT-2666AA4
NT-2660BA4
NT-2668BA4
NT-2664BA4
NT-2666BA4
NT-2664CA4
NT-2660CA4
NT-2666CA4
NT-2664EA4
NT-2664DA4
NT-2668DA4
NT-2666DA4
NT-2660DA4
NT-2664NA4
NT-2666NA4
NT-2666EA4
NT-2660EA4
NT-2660FA4
Hose connector
code
NT-15020A4
NT-15030A4
NT-15040A4
thread size
[inch]
1/8
1/8
1/8
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
1
hose I.D.
1/8 (3,5 mm)
1/4 (6,5 mm)
3/8 (10,2 mm)
1/4 (6,5 mm)
5/16 (8,5 mm)
3/8 (10,2 mm)
1/2 (13,5 mm)
1/4 (6,5 mm)
3/8 (10,2 mm)
1/2 (13,5 mm)
3/4 (19,5 mm)
1/4 (6,5 mm)
5/16 (8,5 mm)
3/8 (10,2 mm)
1/2 (13,5 mm)
5/8 (16,5 mm)
3/4 (19,5 mm)
1/2 (13,5 mm)
3/4 (19,5 mm)
1 (26 mm)
Clamp with 3/4 male thread for valve without thread
hose I.D.
[inch]
1/2
3/4
1
code
NT-57078A5
NT-57079A5
thread size
[inch]
3/4
3/4
clamping range
[mm]
14 do 20
22 do 30
529
INDUSTRIAL FITTINGS - quick release couplings

NiTO 1/2 - 3/4 - 1 system - couplings for water
Material:
Working press.:
Working temp.:
Sealing:
Chromium plated brass

Up to 25 bar
Up to +80C
NBR - cannot be used with fuel and oil
(option - Viton).
For valve O-ring made of EPDM.
High quality quick release water couplings for industrial use.

Available with a wide array of diameter combinations of hoses
and threads, versions with free flow, valve, check valve, etc.
Manufactured in three systems: 1/2, 3/4 and 1 with flow
diameters (A): 1/2 (10 mm), 3/4 (15 mm) and 1 (20 mm).
Elements of different systems are not interchangeable, e.g.
1/2 socket and 3/4 plug cannot be connected.
socket
picture
plug
description
Socket with female

thread (D)
+ plug with hose tail
(B).
Socket with female

thread (D).

(B).
Socket with female

thread (D)
and shut-off valve.
Socket with male

thread (C).
530
hose
1/2 SYSTEM
code
size
NT-53506A3
D-1/2 x B-1/2
NT-535G6A3
D-1/2, 3/4, M22x1

x B-1/2
NT-53500A3
D-1/2
NT-53520A3
D-3/4
NT-5352GA3
D-1/2, 3/4, M22x1
NT-5349SA3
B-3/8
NT-5350SA3
B-1/2
NT-5350CA3
B-5/8
NT-5351SA3
B-3/4
NT-53530A3
D-3/4
NT-5353GA3
D-1/2, 3/4, M22x1
NT-5353RA3
D-1/2, 3/4
NT-5350NA3
C-1/2
NT-5352NA3
C-3/4
NT-5353NA3
C-1/2 (with valve)
3/4 SYSTEM
code
size
NT-63506A3 D-3/4 x B-3/4
NT-63500A3
D-3/4
NT-6350SA3
B-3/4
1 SYSTEM
code
size
NT-73500A3
D-1
NT-6350MA3
B-5/8
NT-63530A3
D-3/4
NT-73530A3
D-1

picture
description
1/2 SYSTEM
3/4 SYSTEM
code
size
NT-5353SA3
B-1/2
NT-5354SA3
B-3/4
Socket with swivel

hose tail (B) and shut- NT-53555A3
-off valve.
code
size
code
size
NT-6353SA3
B-3/4
NT-7353SA3
B-1
B-1/2
NT-7350ZA3
NT-63600A3
B-3/4
NT-73600A3
B-1
NT-6360BA3
B-1/2
NT-7360BA3
B-3/4
NT-6360CA3
B-5/8
NT-6362AA3
B-3/4, 1/2
NT-7360AA3
B-1.1/4, 1
NT-73670A3
C-1 x B-1
NT-73610A3
D-1

(B) and shut-off valve.
Plug blank cap.
NT-53600A3
B-1/2
NT-5360BA3
B-3/8
Plug with hose tail (B). NT-5360CA3
B-5/8
NT-5360DA3
B-1/4
NT-5360EA3
B-3/4
Plug with double hose

NT-5360AA3
tail (B).
Fitting with male

thread (C) and hose
tail (B).
NT-53670A3
Fitting with male

thread (C) and double
hose tail (B).
NT-53680A3
Plug with female

thread (D).
1 SYSTEM
B-3/4, 1/2
NT-6360AA3
B-1, 3/4
NT-63670A3
C-3/4 xB-3/4
C-1/2 x B-1/2
NT-6367AA3 C-3/4 x B-1/2
C-1/2 x
B-3/4, 1/2
NT-63610A3
D-3/4
NT-5361GA3 D-1/2, 3/4, M22x1 NT-6361AA3
D-1/2
NT-53610A3
D-1/2
NT-5361AA3
D-3/4
NT-5361BA3
D-3/8
NT-53620A3
D-M22x1
NT-53640A3
C-1/2
NT-5364AA3
C-3/4
NT-63640A3
C-3/4
NT-73640A3
C-1
NT-6364AA3
C-1/2
NT-7364BA3
C-3/4
NT-5364BA3
C-3/8
NT-5366AA3
C-M24x1
NT-5364NA3
C-M28x1
NT-5364TA3
C-3/4
with check valve
NT-53611A3
C-1/2 Heavy Duty
NT-53615A3
C-3/4 NiTO ll
Double plug.
NT-53650A3
Triple plug.
NT-53760A3

(C) .

(C) for gun.
531

picture
1/2 SYSTEM
description
Adaptor
female thread /
male thread
O-ring
internal thread sealing

(D)
picture
description
reducer
male thread /
male thread
reducer
male thread /
male thread
3/4 SYSTEM
code
size
NT-53690A3
3/4 x 1/2
NT-5369AA3
3/4 x M22x1
NT-53700A3
M22x1 x 1/2
NT-53720A3
M22x1 x 3/4
NT-5369BA3
1/2 x M22x1
NT-5371AA3
1/2 x 3/4
NT-53470A8
NT-53440A8
D - 1/2
NT-5344AA8
D - M22x1
code
size
picture
NT-53730A3
M24x1 x 1/2
NT-53740A3
M24x1 x M22x1
NT-5369DA3
M22x1 x M18x1
1 SYSTEM
code
size
code
size
NT-63690A3
1 x 3/4
NT-63470A8
NT-73470A8
NT-63440A8
D - 3/4
NT-73440A8
D - 1
description
reducer
male thread /
female thread
reducer
male thread /
female thread
code
size
NT-5349BA8
1/2 x 3/8
NT-53490A8
3/4 x 1/2
NT-53480A8
3/4 x 1/2 - M22x1
NiTO SS 1/2 - 3/4 system - couplings for water

Material:
Working press.:
Working temp.:
Sealing:
AISI 316L
Up to 25 bar
Up to +80C
NBR - not suitable for oil and petrol (Viton
seal as an option). EPDM O-ring for a valve
NiTO quick release couplings made of AISI 316L steel,

designed for applications demanding increased hygiene and
corrosion resistance (e.g. food industry, hospitals).
Available in two-size systems - 1/2 and 3/4.
Units of different systems are not interchangeable, e.g. a 1/2
socket cannot be connected to a 3/4 plug.
532

NiTO SS 1/2 - 3/4 system - couplings for water
picture
description
1/2 SYSTEM
3/4 SYSTEM
code
size
code
size
NT-54500A3
D-1/2, 3/4
NT-54520A3
D-3/4
NT-64500A3
D-3/4
socket with
hose tail (B)
NT-5450SA3
B-1/2
NT-6450SA3
B-3/4
socket with
male thread (C)
NT-5450NA3
C-1/2
socket with female thread

(D) and shut-off valve
NT-54530A3
D-3/4
NT-64530A3
D-3/4
socket with hose tail (B)

and shut-off valve
NT-5453SA3
B-1/2
NT-6453SA3
B-3/4
NT-54610A3
D-1/2
NT-64610A3
D-3/4
NT-5461AA3
D-3/4
plug with
hose tail (B)
NT-54600A3
B-1/2
NT-64600A3
B-3/4
plug with double

hose tail (B)
NT-5460AA3
B-1/2, 3/4
NT-54611A3
C-1/2
C-3/4
(NiTO II gun)
NT-64611A3
C-3/4
NT-54615A3
hose tail (B)

with male thread (C)
NT-54670A3
C-1/2 x B-1/2
NT-64670A3
C-3/4 x B-3/4
reducing Adaptor
male thread / female thread
NT-54490A3
3/4 x 1/2
socket with
female thread (D)
plug with
female thread (D)
plug with male thread (C)
533

NiTO SC with a safety lock - couplings for water
Material:
Working press.:
Working temp.:
Sealing:
Chrome-plated brass
To 25 bar
Up to +150C
Viton
Quick release couplings NiTO SC (Safety Coupling) are used

for hot water applications (above +60C), where an operator
has a direct contact with couplings or when couplings are
frequently disconnected (e.g. gun assembly). Due to their
unique construction the couplings interlock when under
pressure and disconnect only if the water supply is shut off.
Particularly recommended for hot water guns connection.
picture
description
code
size
NT-6150SA8
B-3/4
NT-6151SA8
B-1/2

(for HEAVY DUTY gun)
NT-61640A8
C-1/2

(for NiTO II gun)
NT-61650A3
C-3/4
NT-61660A3
B-1/2
NT-61670A3
B-3/4

(for HEAVY DUTY and NiTO II gun)
plug with hose tail (B)
NiTO CLICK 1/2 - 3/4 system - couplings for water

Material:
Working press.:
Working temp.:
Sealing:
Chrome-plated brass (matt - satin)

To 25 bar
Up to +150C
NBR - not suitable for oil and petrol (Viton
seal as an option). EPDM O-ring for a valve.
NITO CLICK quick release couplings are manufactured

according to the profile of popular quick release plastic
couplings with the same sealing type - O-ring on the plug
external surface. They are fully compatible with plastic quick
release couplings used in gardening, public facilities and
industry. Made of metal - for long service life.
534

NiTO CLICK 1/2 - 3/4 system - couplings for water
picture
description
1/2 CLICK SYSTEM
3/4 CLICK SYSTEM
code
size
code
size
Adaptor - NiTO standard socket

with NiTO CLICK plug
NT-59810A3
Adaptor - NiTO CLICK socket

with NiTO standard plug
NT-59820A3
socket with female thread (D)
NT-5952GA3
D - 1/2, 3/4,
M22x1
NT-69500A3
D - 3/4
socket with male thread (C)
NT-5950NA3
C - 1/2
NT-5949SA3
B - 3/8
NT-5950SA3
B - 1/2
NT-5950CA3
B - 5/8
NT-6950SA3
B - 3/4
NT-5951SA3
B - 3/4
NT-5953SA3
B - 1/2
NT-69600A3
B - 3/4
NT-6960BA3
B - 1/2

with shut-off valve
plug with hose tail (B)
NT-59600A3
B - 1/2
plug with double hose tail (B)
NT-5960AA3
B - 1/2, 3/4
plug with female thread (D)
NT-5961GA3
D - 1/2, 3/4,
M22x1
NT-69610A3
D - 3/4
NT-59640A3
C - 1/2
NT-69640A3
C - 3/4

NT-5964AA3
C - 3/4
535

DYROS couplings - 6 series
Characteristics: Mini couplings 6 series are used wherever small dimensions, reliability and safety are required.
The valves of the couplings ensure excellent tightness at very low pressure.
Sockets without valves are marked with OV at the end of a code.
All parts of the couplings are made of brass, whereas locking rings, springs and balls of highgrade stainless steel. Working pressure up to 15 bar.
Sockets covered with red or blue plastic are available on request.
Application:
- mould coolants in plastics industry,

- compressed air installations,
- technical gas cylinders,
- many other branches of technology,
Interchangeable: HASCO Z9 series.

Sealing:
536
O-rings are made of Viton that is resistant to mineral oils, lubricants, petrol, hydrocarbons
(methane, ethane, propane, ethylene, acetylene), acids, bases and many other chemicals.
Viton withstands temperatures from -25C to +200C (with peaks up to +230C).
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-LK613
4,7
DY-LK614
6,3
DY-LK615
DY-LK616
9,5
DY-LK618
12,7
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-VK614/90
6,3
DY-VK615/90
DY-VK616/90
9,5
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-VK614/45
6,3
DY-VK615/45
DY-VK616/45
9,5
code
thread
size
full flow
DN
[mm]
DY-LKM610
DY-LKM645
DY-LKM665
DY-LKR618
DY-LKR614
DY-LKR638
M10x1
M14x1,5
M16x1,5
1/8
1/4
3/8
6
6
6
6
6
6
description
Socket (straight) with hose tail and

shut-off valve.
Material: brass.
Seal: Viton.
description
90 socket with hose tail and shut-off

valve
Material: brass.
Seal: Viton.
description

valve
Material: brass.
Seal: Viton.
description
Socket (straight) with female thread

and shut-off valve.
Material: brass.
Seal: Viton.

code
thread
size
full flow
DN
[mm]
description
DY-LKUM610
DY-LKUM645
DY-LKUM665
DY-LKUR618
DY-LKUR614
DY-LKUR638
M10x1
M14x1,5
M16x1,5
1/8
1/4
3/8
6
6
6
6
6
6
Socket (straight) with male thread

and shut-off valve.
Material: brass.
Seal: Viton.
code
thread
size
full flow
DN
[mm]
description
DY-VKUM610/45
M10x1
DY-VKUM645/45
M14x1,5
DY-VKUR618/45
1/8
DY-VKUR614/45
1/4
code
thread
size
full flow
DN
[mm]
DY-VKUM610/90
M10x1
DY-VKUM645/90
M14x1,5
DY-VKUR618/90
1/8
DY-VKUR614/90
1/4
code
thread
size
DY-N608
DY-N610
DY-N610/1,5
DY-N645
DY-N618
DY-N614
DY-N638
M8x0,75
M10x1
M10x1,5
M14x1,5
1/8
1/4
3/8
code
thread
size
full flow
DN
[mm]
DY-N645V
M14x1,5
DY-N614V
1/4
DY-N638V
3/8
code
thread
size
full flow
DN
[mm]
DY-N610/29
M10x1
DY-N618/29
1/8
DY-N614/32
1/4
full flow
DN
[mm]
4,3
6
6
6
6
6
6
45 socket with male thread and

shut-off valve.
Material: brass.
Seal: Viton.
description

shut-off valve.
Material: brass.
Seal: Viton.
description
Plug with male thread without valve.

Material: brass.
description
Plug with male thread and shut-off

valve.
Material: brass.
Seal: Viton.
description

Material: brass.
537

538
code
thread
size
full flow
DN
[mm]
DY-N610/50
M10x1
DY-N645/50
M14x1,5
DY-N618/50
1/8
DY-N614/50
1/4
code
thread
size
full flow
DN
[mm]
DY-N610/100
M10x1
DY-N645/100
M14x1,5
DY-N618/100
1/8
DY-N614/100
1/4
DY-N638/100
3/8
code
thread
size
full flow
DN
[mm]
DY-NI618
1/8
DY-NI614
1/4
code
thread
size
full flow
DN
[mm]
DY-VN608
DY-VN610
DY-VN645
DY-VN618
DY-VN614
DY-VN638
M8x0,75
M10x1
M14x1,5
1/8
1/4
3/8
4,3
6
6
6
6
6
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-N623
4,7
DY-N624
6,3
DY-N625
DY-N626
9,5
DY-N628
12,7
code
pipe
O.D.
[mm]
full flow
DN
[mm]
DY-N614/K8
DY-N638/K10
10
description
Plug with male thread without valve,

L = 50 mm.
Material: brass.
description

L = 100 mm.
Material: brass.
description
Plug with female thread without

valve.
Material: brass.
description
90 plug with male thread without

valve.
Material: brass.
description
Plug with hose tail without valve.

Material: brass.
description
Plug with a connection for a cutting

ring, without valve.
Material: brass.

code
pipe
O.D.
[mm]
full flow
DN
[mm]
DY-VN614/K8
DY-VN638/K10
10
code
pipe
O.D.
[mm]
full flow
DN
[mm]
description
DY-N608/50
DY-N608/65
DY-N608/80
DY-N608/100
DY-N608/120
DY-N608/240
DY-N608/360
10
10
10
10
10
10
10
6
6
6
6
6
6
6
Plug with a brass tube, without valve

(L = 50, 65, 80, 100, 120, 240, 360
mm).
Material: brass.
code
series
full flow
DN
[mm]
description
DY-N600D
6x6
description
90 plug with a connection for a cutting

Material: brass.
Double plug.
Material: brass.
DY-N600/900D
6 x 90
code
coupling
series
plug
series
DY-LK600/300
30
DY-LK600/400
40
DY-LK600/900
90
description
Socket - plug Adaptor.

Material: brass.
539

The valves of couplings ensure excellent tightness at very low pressure.
Sockets without valves are marked with OV at the end of a code.
Application:

- many other branches of technology.
Interchangeable: DME JIFFY with 9 mm plug outer dimension.

Sealing:
540
Viton withstands temperatures from -25C to +200C (with peaks up to +230C) .
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-LK313
4,7
DY-LK314
6,3
DY-LK315
DY-LK316
9,5
DY-LK318
12,7
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-VK314/90
6,3
DY-VK315/90
DY-VK316/90
9,5
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-VK314/45
6,3
DY-VK315/45
DY-VK316/45
9,5
code
thread
size
full flow
DN
[mm]
DY-LKM310
DY-LKM345
DY-LKM365
DY-LKR318
DY-LKR314
DY-LKR338
M10x1
M14x1,5
M16x1,5
1/8
1/4
3/8
6
6
6
6
6
6
description

shut-off valve.
Material: brass.
Seal: Viton.
description

valve
Material: brass.
Seal: Viton.
description

valve
Material: brass.
Seal: Viton.
description

and shut-off valve.
Material: brass.
Seal: Viton.

code
thread
size
full flow
DN
[mm]
description
DY-LKUM310
DY-LKUM345
DY-LKUM365
DY-LKUR318
DY-LKUR314
DY-LKUR338
M10x1
M14x1,5
M16x1,5
1/8
1/4
3/8
6
6
6
6
6
6
Socket (straight) with male thread and

shut-off valve.
Material: brass.
Seal: Viton.
code
thread
size
full flow
DN
[mm]
description
DY-VKUM310/45
M10x1
DY-VKUM345/45
M14x1,5
DY-VKUR318/45
1/8
DY-VKUR314/45
1/4
code
thread
size
full flow
DN
[mm]
DY-VKUM310/90
M10x1
DY-VKUM345/90
M14x1,5
DY-VKUR318/90
1/8
DY-VKUR314/90
1/4
code
thread
size
full flow
DN
[mm]
DY-N310
M10x1
DY-N345
M14x1,5
DY-N318
1/8
DY-N314
1/4
DY-N338
3/8
code
thread
size
full flow
DN
[mm]
DY-N345V
M14x1,5
DY-N314V
1/4
DY-N338V
3/8

shut-off valve.
Material: brass.
Seal: Viton.
description

shut-off valve.
Material: brass.
Seal: Viton.
description

Material: brass.
description

valve.
Material: brass.
Seal: Viton.
541

thread
size
full flow
DN
[mm]
DY-N310/100
M10x1
DY-N345/100
M14x1,5
DY-N318/100
1/8
DY-N314/100
1/4
DY-N338/100
3/8
code
thread
size
full flow
DN
[mm]
DY-NI318
1/8
DY-NI314
1/4
DY-NI338
3/8
code
thread
size
full flow
DN
[mm]
DY-VN310
M10x1
DY-VN345
M14x1,5
DY-VN318
1/8
DY-VN314
1/4
DY-VN338
3/8
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-N324
6,3
DY-N325
DY-N326
9,5
DY-N328
12,7
code
pipe
O.D.
[mm]
full flow
DN
[mm]
DY-N314/K8
DY-N338/K10
10
code
542
description
Plug with male thread without

valve, L = 100 mm.
Material: brass.
description
Plug with female thread without

valve.
Material: brass.
description

valve.
Material: brass.
description

Material: brass.
description

Material: brass.

code
pipe
O.D.
[mm]
full flow
DN
[mm]
DY-VN314/K8
DY-VN338/K10
10
code
pipe
O.D.
[mm]
full flow
DN
[mm]
DY-N308/120
10
DY-N308/240
10
DY-N308/360
10
code
coupling
series
plug
series
DY-LK300/400
30
40
DY-LK300/600
30
DY-LK300/900
30
90
code
coupling
series
plug
series
DY-VK300/400/90
30
40
DY-VK300/600/90
30
DY-VK300/900/90
30
90
code
coupling
series
plug
series
DY-VK300/400/45
30
40
DY-VK300/600/45
30
DY-VK300/900/45
30
90
description

Material: brass.
description

(L = 120, 240, 360 mm).
Material: brass.
description
Adaptor coupling - plug.

Material: brass.
description
90 Adaptor coupling - plug.

Material: brass.
description
45 Adaptor coupling - plug.

Material: brass.
543

The valves of the couplings ensure excellent tightness at very low pressure. Sockets without
valves are marked with OV at the end of a code.
All parts of the couplings are made of brass, whereas locking rings, springs and balls of stainless
steel. Working pressure up to 15 bar.
Items marked with * can be also delivered with plugs made of stainless steel.
Application:

Interchangeable: DME JIFFY with 13 mm plug outer dimension.

Sealing:
544
Viton withstands temperatures from -25C to +200C (with peaks up to +230C ).
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-LK416
9,5
DY-LK411
11
DY-LK418
12,7
DY-LK458
15,85
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-VK411/90
11
DY-VK418/90
12,7
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-VK411/45
11
DY-VK418/45
12,7
code
thread
size
full flow
DN
[mm]
DY-LKM445
DY-LKM465
DY-LKM485
DY-LKR414
DY-LKR438
DY-LKR412
M14x1,5
M16x1,5
M18x1,5
1/4
3/8
1/2
9
9
9
9
9
9
description

shut-off valve.
Material: brass.
Seal: Viton.
description

valve.
Material: brass.
Seal: Viton.
description

valve.
Material: brass.
Seal: Viton.
description

and shut-off valve.
Material: brass.
Seal: Viton.

code
thread
size
full flow
DN
[mm]
description
DY-LKUM445
DY-LKUM465
DY-LKUM485
DY-LKUR414
DY-LKUR438
DY-LKUR412
M14x1,5
M16x1,5
M18x1,5
1/4
3/8
1/2
9
9
9
9
9
9

shut-off valve.
Material: brass.
Seal: Viton.
code
thread
size
full flow
DN
[mm]
description
DY-VKUM445/45
M14x1,5
DY-VKUM465/45
M16x1,5
DY-VKUM485/45
M18x1,5
DY-VKUR414/45
1/4
DY-VKUR438/45
3/8
code
thread
size
full flow
DN
[mm]
DY-VKUM445/90
M14x1,5
DY-VKUM465/90
M16x1,5
DY-VKUM485/90
M18x1,5
DY-VKUR414/90
1/4
DY-VKUR438/90
3/8
code
thread
size
full flow
DN
[mm]
DY-N414
1/4 BSPT
DY-N438
3/8 BSPT
DY-N410
M10x1
DY-N418
1/8 BSP
DY-N412
1/2 BSP
code
thread
size
full flow
DN
[mm]
DY-N414V
1/4
DY-N438V
3/8
DY-N412V
1/2
code
thread
size
full flow
DN
[mm]
DY-N418/100
1/8
DY-N414/100
1/4
DY-N438/100
3/8
DY-N410/100
M10x1

shut-off valve.
Material: brass.
Seal: Viton.
description

shut-off valve.
Material: brass.
Seal: Viton.
description

Material: brass.
Seal: Viton.
description

valve.
Material: brass.
Seal: Viton.
description

L = 100 mm.
Material: brass.
545

code
thread
size
full flow
DN
[mm]
DY-NI418
1/8
DY-NI414
1/4
DY-NI438
3/8
DY-NI412
1/2
code
thread
size
full flow
DN
[mm]
DY-VN414
1/4
DY-VN438
3/8
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-N426
9,5
description
Plug with female thread without valve.

Material: brass.
description

valve.
Material: brass.
description

Material: brass.
546
DY-N428
12,7
code
pipe
O.D.
[mm]
full flow
DN
[mm]
DY-N414/K8
DY-N438/K10
10
code
pipe
O.D.
[mm]
full flow
DN
[mm]
DY-VN414/K8
DY-VN438/K10
10
code
pipe
O.D.
[mm]
full flow
DN
[mm]
DY-N408/150
14
DY-N408/300
14
DY-N408/450
14
description

Material: brass.
description

Material: brass.
description

(L = 150, 300, 450 mm).
Material: brass.

valves are marked with OV at the end of a code.
All parts of the couplings are made of brass, whereas locking rings, springs and balls of stainless
steel. Working pressure up to 15 bar.
Application:

- in operating rooms,
- many other branches of technology,
Sealing:
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-LK818
12,7
13
DY-LK819
19
13
code
hose
I.D.
[mm]
full flow
DN
[mm]
description
description

shut-off valve.
Material: brass.
Seal: Viton.
DY-VK819/90
19
13

valve.
Material: brass.
Seal: Viton.
code
hose
I.D.
[mm]
full flow
DN
[mm]
description
DY-VK819/45
19
13

valve.
Material: brass.
Seal: Viton.
code
thread
size
full flow
DN
[mm]
description
DY-LKUR812
1/2
13
DY-LKUR834
3/4
13
DY-LKUM824
M24x1,5
13

shut-off valve.
Material: brass.
Seal: Viton.
547

548
code
thread
size
full flow
DN
[mm]
DY-VKUR812/90
1/2
13
DY-VKUR834/90
3/4
13
DY-VKUM824/90
M24x1,5
13
code
thread
size
full flow
DN
[mm]
DY-VKUR812/45
1/2
13
DY-VKUR834/45
3/4
13
DY-VKUM824/45
M24x1,5
13
code
hose I.D.
[mm]
thread [inch]
DY-LKUR834/19
9,5
3/4
full flow
DN
[mm]
13
code
coupling
series
plug
series
DY-LK800/400
80
40
DY-LK800/900
80
90
code
thread
size
full flow
DN
[mm]
DY-N812
1/2
13
DY-N834
3/4
13
DY-N824
M24x1,5
13
description

shut-off valve.
Material: brass.
Seal: Viton.
description

shut-off valve.
Material: brass.
Seal: Viton.
description
Socket with hose tail, male thread

and shut-off valve.
Material: brass.
Seal: Viton.
description
Adaptor socket - plug.

Material: brass.
Seal: Viton.
description

Material: brass.

code
thread
size
full flow
DN
[mm]
DY-VN812
1/2
13
DY-VN834
3/4
13
DY-VN824
M24x1,5
13
code
thread
size
full flow
DN
[mm]
description
DY-N812/100
1/2
13

L=100 mm.
Material: brass.
code
thread
size
full flow
DN
[mm]
description
DY-N812V
1/2
13
DY-N834V
3/4
13
DY-N824V
M24x1,5
13
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-N828
12,7
10
description

valve.
Material: brass.

valve.
Material: brass.
Seal: Viton.
description

Material: brass.
DY-N819
19
13
code
pipe
O.D.
[mm]
full flow
DN
[mm]
DY-N808/500
21
13
description

(L = 500 mm).
Material: brass.
549

valves are marked with OV at the end of a code number.
Items marked with * can be also delivered with plugs made of stainless steel.
Application:

Interchangeable: HASCO Z13 series.

Sealing:
550
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-LK916
9,5
DY-LK911
11
DY-LK918
12,7
DY-LK958
15,85
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-VK911/90
11
DY-VK918/90
12,7
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-VK911/45
11
DY-VK918/45
12,7
code
thread
size
full flow
DN
[mm]
DY-LKM945
DY-LKM965
DY-LKM985
DY-LKR914
DY-LKR938
DY-LKR912
M14x1,5
M16x1,5
M18x1,5
1/4
3/8
1/2
9
9
9
9
9
9
description

shut-off valve.
Material: brass.
Seal: Viton.
description

valve.
Material: brass.
Seal: Viton.
description

valve.
Material: brass.
Seal: Viton.
description

and shut-off valve.
Material: brass.
Seal: Viton.

code
thread
size
full flow
DN
[mm]
description
DY-LKUM945
DY-LKUM965
DY-LKUM985
DY-LKUR914
DY-LKUR938
DY-LKUR912
M14x1,5
M16x1,5
M18x1,5
1/4
3/8
1/2
9
9
9
9
9
9

shut-off valve.
Material: brass.
Seal: Viton.
code
thread
size
full flow
DN
[mm]
description
DY-VKUM945/45
M14x1,5
DY-VKUM965/45
M16x1,5
DY-VKUM985/45
M18x1,5
DY-VKUR914/45
1/4
DY-VKUR938/45
3/8
code
thread
size
full flow
DN
[mm]
DY-VKUM945/90
M14x1,5
DY-VKUM965/90
M16x1,5
DY-VKUM985/90
M18x1,5
DY-VKUR914/90
1/4
DY-VKUR938/90
3/8
code
thread
size
DY-N918*
DY-N914*
DY-N938*
DY-N912
DY-N910
DY-N910/1,5
DY-N945
DY-N965
1/8
1/4
3/8
1/2
M10x1
M10x1,5
M14x1,5
M16x1,5
code
thread
size
full flow
DN
[mm]
DY-N914V
1/4
DY-N938V
3/8
DY-N945V
M14x1,5
DY-N965V
M16x1,5
code
thread
size
full flow
DN
[mm]
full flow
DN
[mm]
6
9
9
9
6
6
9
9
DY-N918/100
1/8
DY-N914/100*
1/4
DY-N938/100*
3/8
DY-N945/100
M14x1,5
DY-N965/100
M16x1,5

shut-off valve.
Material: brass.
Seal: Viton.
description

shut-off valve.
Material: brass.
Seal: Viton.
description

Material: brass.
description

valve.
Material: brass.
Seal: Viton.
description

L = 100 mm.
Material: brass.
551

code
thread
size
full flow
DN
[mm]
DY-NI918
1/8
DY-NI914
1/4
DY-NI938
3/8
DY-NI912
1/2
code
thread
size
full flow
DN
[mm]
DY-VN914*
1/4
DY-VN938*
3/8
DY-VN945
M14x1,5
DY-VN965
M16x1,5
code
hose
I.D.
[mm]
full flow
DN
[mm]
DY-N926
9,5
description
Plug with female thread without valve.

Material: brass.
description

valve.
Material: brass.
description

Material: brass.
552
DY-N928
12,7
code
pipe
O.D.
[mm]
full flow
DN
[mm]
DY-N914/K8
DY-N938/K10
10
code
pipe
O.D.
[mm]
full flow
DN
[mm]
DY-VN914/K8
DY-VN938/K10
10
code
pipe
O.D.
[mm]
full flow
DN
[mm]
DY-N908/70
14
DY-N908/150
14
DY-N908/300
14
DY-N908/450
14
description

Material: brass.
description

Material: brass.
description

(L = 70,150, 300, 450 mm).
Material: brass.

DYROS couplings - accessories
code
thread
size
thread
length
size of
hexagon
spanner
DY-KGP-2106
DY-KGP-2108
DY-KGP-2110
DY-KGP-2125
DY-KGP-2145
DY-KGP-2118
DY-KGP-2114
DY-KGP-2138
DY-KGP-2112
M6x0,75
M8x0,75
M10x1
M12x1,5
M14x1,5
BSPT 1/8
BSPT 1/4
BSPT 3/8
BSPT 1/2
7
8
8
8
10
10
10
10
10
3
4
5
6
7
5
7
8
10
code
coupling
series
bridge
length
[mm]
DY-LKD668/125
125
DY-LKD668/250
250
DY-LKD668/500
500
code
coupling
series
bridge
length
[mm]
DY-LKD368/125
30
125
DY-LKD368/250
30
250
DY-LKD368/500
30
500
code
coupling
series
bridge
length
[mm]
DY-LKD481/125
40
125
DY-LKD481/250
40
250
DY-LKD481/500
40
500
code
coupling
series
bridge
length
[mm]
DY-LKD981/125
90
125
DY-LKD981/250
90
250
DY-LKD981/500
90
500
description
Socket plug of mould

base.
Material: brass.
description
Bridge with two couplings and interconnecting brass tube.

Material: brass.
description

Material: brass.
description

Material: brass.
description

Material: brass.
553

TUTHILL couplings for moulding equipment
J-60000 series
Working press.: 16 bar (up to +150C)
10 bar (up to +200C)
Material:
Ferrule, plug - stainless steel
Socket body - brass
Seal:
Viton
Application:
Cooling or heat regulation
with water/oil.
Interchangeable: Compatible with couplings
of the same plug design
554
code
hose I.D.
[mm]
full flow DN
[mm]
TH-JL6065689
TH-JL6095612
12
code
thread size
full flow DN
[mm]
TH-JL6062614
1/4
TH-JL6092638
3/8
code
thread size
[BSPT]
full flow DN
[mm]
TH-JL6067218
1/8
TH-JL6067214
1/4
TH-JL6097214
1/4
TH-JL6097238
3/8
code
thread size
[BSPT]
full flow DN
[mm]
TH-JL6066314
1/4
TH-JL6096314
1/4
TH-JL6096338
3/8
code
thread size
full flow DN
[mm]
TH-JL6097114
1/4
code
thread size
full flow DN
[mm]
TH-JL6096238
3/8
description
Socket with hose tail and

valve.
description
Socket with female thread

and valve.
description
Plug with male thread and

shut-off valve.
description

without valve.
description
Plug with female thread

and valve.
description

without valve.

J-70000 series
Working press.:
Working temp.:
Material:
Seal:
Application:
10 bar
Up to +160C
Nickel-plated brass
Viton
Cooling or heat regulation
with water/oil.
Male threads:
PTFE covered (NPT on request)
Interchangeable: Compatible with couplings
of the same plug design
code
hose I.D.
[mm]
full flow DN
[mm]
TH-JL7086789
TH-JL7086701
10
TH-JL7086712
12
TH-JL7126713
13
12
TH-JL7126716
16
12
code
hose I.D.
[inch]
full flow DN
[mm]
TH-JL7086812
1/2
TH-JL7086838
3/8
code
hose I.D.
[mm]
full flow DN
[mm]
TH-JL7088289
TH-JL7088201
10
TH-JL7088212
12
code
hose I.D.
[mm]
full flow DN
[mm]
TH-JL7088301
10
TH-JL7088312
12
code
thread size
full flow DN
[mm]
TH-JL7086214
1/4
TH-JL7126212
1/2
12
description
Plug with a straight hose

tail without valve.
description
Plug with straight push-on
type hose tail without
valve.
description
90 plug with hose tail

without valve.
description
45 plug with hose tail

without valve.
description
Plug (straight) with female

thread without valve.
555

556
code
thread size
[BSPT]
full flow DN
[mm]
TH-JL7083618
1/8
TH-JL7083614
1/4
TH-JL7083638
3/8
TH-JL7123638
3/8
12
TH-JL7123612
1/2
12
code
thread size
[BSPT]
full flow DN
[mm]
TH-JL7084818
1/8
TH-JL7084814
1/4
TH-JL7084838
3/8
code
thread size
[BSPT]
full flow DN
[mm]
TH-JL7085818
1/8
TH-JL7085814
1/4
TH-JL7085838
3/8
code
thread size
[BSPP]
full flow DN
[mm]
TH-JL7082618
1/8
TH-JL7082614
1/4
TH-JL7122638
3/8
12
code
thread size
[BSPP]
length
[mm]
TH-JL7083118
1/8
50
TH-JL7083218
1/8
100
TH-JL7083318
1/8
150
TH-JL7083114
1/4
50
TH-JL7083214
1/4
100
TH-JL7083314
1/4
150
TH-JL7083414
1/4
200
TH-JL7083514
1/4
250
code
colour
full flow DN
[mm]
TH-J62P082
red
TH-J62P083
blue
TH-J62P122
red
12
TH-J62P123
blue
12
code
full flow DN
[mm]
TH-JL7085000
description
Socket (straight) with male

description
90 socket with male

description
45 socket with male

description
Socket (straight) with female thread without valve.
description
Extended socket with male

thread without valve, full
flow 8 mm.
description
Socket identification rings.
description
Bulkhead socket.

EUROSTANDARD 7,2 couplings for air
code
hose
I.D.
[mm]
TP-ES72-GK-06
TP-ES72-GK-08
TP-ES72-GK-09
TP-ES72-GK-10
10
TP-ES72-GK-13
13
code
thread size
[inch]
TP-ES72-GW-04
1/4
TP-ES72-GW-06
3/8
TP-ES72-GW-08
1/2
code
thread size
[inch]
TP-ES72-GZ-04
1/4
TP-ES72-GZ-06
3/8
TP-ES72-GZ-08
1/2
code
hose
I.D.
[mm]
TP-ES72-WK-06
TP-ES72-WK-08
TP-ES72-WK-09
TP-ES72-WK-10
10
TP-ES72-WK-13
13
code
thread size
[inch]
TP-ES72-WW-02
1/8
TP-ES72-WW-04
1/4
TP-ES72-WW-06
3/8
TP-ES72-WW-08
1/2
code
thread size
[inch]
TP-ES72-WZ-02
1/8
TP-ES72-WZ-04
1/4
TP-ES72-WZ-06
3/8
TP-ES72-WZ-08
1/2
description
Socket with cut-off valve and hose tail.

Material: brass.
Full flow DN: 7,2 mm.
Working press.: up to 35 bar.
description
Socket with cut-off valve and female
thread.
Material: brass.
description
Socket with cut-off valve and male
thread.
Material: brass.
description
Plug with hose tail.

Material: brass.
description
Plug with female thread.

Material: brass.
description
Plug with male thread.

Material: brass.
557

RECTUS couplings
Structure of RECTUS code
26
series
KA
type
AW
connection
socket
KA - single shut-off
KB - double shut-off
KF - straight through
KS - safety locking system preventing

unintentional disconnection
KL - dry-brake
KE - self-venting system
plug
SB - double shut-off
SF - straight through
SS - safety locking system preventing

unintentional disconnection
SL - dry-brake
SR - recoil eliminator
hose connection
TF - straight
TR - 90 elbow TR - 45 elbow
TS - for panel mounting
TP - for PARKER hoses
TG - according to DIN 8542
plastic hose
connection
KO - with nuts, without spring
KK - with nuts, with spring
KS - with nut and

for panel mounting
558
13
connection size
Whitworth thread
10 - 1/8
13 - 1/4
17 - 3/8
21 - 1/2
26 - 3/4
33 - 1
metric thread
05 - M5
10 - M10x1
12 - M12x1,5
14 - M14x1,5
16 - M16x1,5
18 - M18x1,5
material
sealing
surface
M - brass
S - steel
R - AISI 304
E - AISI 316L
A - aluminium
K - thermoplastics
D - Delrin
F - PVDF
hose connection
e.g. 06 - hose 6 mm
X - without seal
P - Perbunan (NBR)
V - FKM/FPM (Viton)
E - EPDM
S - silicone
K - Kalrez
plastic hose
connection
04 - 3x4 mm
05 - 3x5 mm
06 - 4x6 mm
08 - 6x8 mm
10 - 8x10 mm
12 - 9x12 mm
X - without surface treatment

N - nickel-plated
C - chrome-plated
Z - zinc-plated
D - chemically zinc-plated
B - browning (steel black)
male thread
AW - BSP thread
AK - BSPT thread
AN - NPT thread
AD - DIN 2353 metric thread
AM - metric thread
AF - UNF thread
WP - SERTO PLAN thread
SS - SERTO PLAN thread for

panel mounting
MP - SERTO PLAN metric thread
female thread
IW - BSP thread
IK - BSPT thread
IN - NPSF thread
IM - metric thread
IF - UINF thread
IL - BSP thread (left)
IP - PG thread
VG - valve thread
other connections
KL - insert for

plug-in connection
PV - FIX connection for

PVC hoses
DS - double plug-in plug

RECTUS couplings
02KA series DN 1,5
Flow rate:
105 l/min at entrance pressure

Pe = 6 bar (p = 0,5 bar, air)
Working temp.: NBR: from -20C up to +100C
EPDM: from -40C up to +120/150C
Viton: from -15C up to +200C
Material:
Description:
Application:
As a standard both the threaded part and socket body are made of brass. The ferrule, plug and
valve are made of brass as well. The spring and locking ring are made of AISI 301 steel, balls of
AISI 420 steel and sealing of NBR.
The smallest coupling for one hand operation. High flow efficiency at low pressure drop. Used for
gas and air transfer. Suitable for liquid media transfer as well.
Medical, measuring and regulating technology, laboratories, textile machines, training systems,
chemistry, lubrication systems, analysers, robots, pneumatic tools, blood pressure measuring
devices, dental surgery equipment.
Socket with hose tail for panel

mounting
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-02KAAM03MPX
M3
19
6,5
RE-02KAAM03MPN
M3
19
6,5
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-02KAIM03MPX
M3
19
6,5
RE-02KAIM03MPN
M3
19
6,5
code
hose I.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-02KATF02MPX
21
6,5
5,5
RE-02KATF02MPN
21
6,5
5,5
RE-02KATF03MPX
22
6,5
6,5
RE-02KATF03MPN
22
6,5
6,5
code
hose I.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1/L2
[mm]
RE-02KATS02MPX
29
6,5
8/5,5
M5
RE-02KATS02MPN
29
6,5
8/5,5
M5
RE-02KATS03MPX
30
6,5
8/6,5
M5
RE-02KATS03MPN
30
6,5
8/6,5
M5
559

RECTUS couplings
Plug with hose tail
Plug with hose tail for panel

mounting
560
code
hose I.D.
[mm]
L
[mm]
D
[mm]
L1
[mm]
L2
[mm]
5,5
RE-02SFTF02MXX
12
RE-02SFTF02MXN
12
5,5
RE-02SFTF03MXX
13
6,5
RE-02SFTF03MXN
13
6,5
code
hose I.D.
[mm]
SW
[mm]
L
[mm]
L1
[mm]
L2/L3
[mm]
RE-02SFTS02MXX
21,5
8/5,5
M5
RE-02SFTS02MXN
21,5
8/5,5
M5
RE-02SFTS03MXX
22,5
8/6,5
M5
RE-02SFTS03MXN
22,5
8/6,5
M5
code
thread
size
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
RE-02SFAM03MXX
M3
11
RE-02SFAM03MXN
M3
11
code
thread
size
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
RE-02SFIM03MXX
M3
10
RE-02SFIM03MXN
M3
10

RECTUS couplings
20 series DN 2,7
Flow rate:
actual size

EPDM: from -40C up to +120C
Material:
As a standard the threaded part and the body of socket, ferrule, plug and valve are made of
brass, springs of AISI 301 steel, balls of AISI 420 steel, sealing of NBR. Other materials are
available on request (zinc-plated steel, AISI 303, AISI 316Ti, EPDM and Viton seal).
Description:
High quality, very small couplings for one hand operation. High flow efficiency at low pressure
drop. Available as single shut-off, double shut-off and straight-through version.
Medical, measuring and regulating technology, laboratories, textile machines, chemistry,
Application:
lubrication systems, analysers, robots, pneumatic tools, blood pressure measuring devices,
dental surgery equipment.
Interchangeable: WALTHER 06-003, RECTUS 91.
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
single shut-off
RE-20KAAM05MPX
M5
26
10
RE-20KAAW10MPX
1/8
11
28
10
double shut-off
RE-20KBAM05MPX
M5
26
10
RE-20KBAW10MPX
1/8
11
28
10
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
single shut-off
RE-20KAIM05MPX
M5
26
10
RE-20KAIW10MPX
1/8
12
28
10
double shut-off
RE-20KBIM05MPX
M5
26
10
RE-20KBIW10MPX
1/8
11
28
10
code
hose I.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
single shut-off
RE-20KATF03MPX
35
10
13
RE-20KATF04MPX
35
10
13
RE-20KATF05MPX
35
10
13
double shut-off
RE-20KBTF03MPX
35
10
13
RE-20KBTF04MPX
35
10
13
RE-20KBTF05MPX
35
10
13
561

RECTUS couplings
code
thread
size
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
straight through
RE-20SFAM05MXX
M5
18
10
RE-20SFAW10MXX
1/8
11
20
10
RE-20SBAM05MPX
M5
28
10
RE-20SBAW10MPX
1/8
11
30
10
code
thread
size
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
double shut-off
straight through
RE-20SFIM05MXX
M5
17
10
RE-20SFIW10MXX
1/8
12
19
10
double shut-off
Plug with hose tail
RE-20SBIM05MPX
M5
26,5
10
RE-20SBIW10MPX
1/8
12
30
10
hose I.D.
[mm]
L
[mm]
D
[mm]
L1
[mm]
L2
[mm]
RE-20SFTF03MXX
24
10
13
RE-20SFTF04MXX
24
10
13
RE-20SFTF05MXX
24
8,5
12,5
RE-20SBTF03MPX
36,5
10
13
RE-20SBTF04MPX
36,5
10
13
RE-20SBTF05MPX
36,5
10
13
code
straight through
double shut-off
Socket with hose tail for panel

mounting
hose I.D.
[mm]
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
RE-20KATS03MPX
12
51
11
13
M7x0,5
RE-20KATS04MPX
12
51
11
13
M7x0,5
RE-20KATS06MPX
12
51
12
13
M10x1
RE-20KBTS03MPX
12
51
11
13
M7x0,5
RE-20KBTS04MPX
12
51
11
13
M7x0,5
RE-20KBTS06MPX
12
51
12
13
M10x1
code
hose I.D.
[mm]
SW
[mm]
L
[mm]
L1
[mm]
L2/L3
[mm]
RE-20SFTS03MXX
12
45
10
17/11
M7x0,5
RE-20SFTS04MXX
12
45
10
17/11
M7x0,5
RE-20SBTS03MPX
12
52,5
10
17/13
M7x0,5
RE-20SBTS04MPX
12
52,5
10
17/13
M7x0,5
RE-20SBTS06MPX
12
46,5
10
17/12
M10x1
code
single shut-off
double shut-off
Plug with hose tail for panel

mounting
straight through
double shut-off
562

RECTUS couplings
21 series DN 5
Flow rate:

Kalrez: from 0C up to +316C
actual size
Material:
As a standard the threaded part and the body of socket, ferrule, plug and valve are made of
brass, springs and ring of AISI 301 steel, balls of AISI 420 steel, sealing of NBR. Other materials
are available on request (zinc-plated steel, AISI 303, AISI 316Ti , EPDM, Kalrez and Viton seal).
Description:
A bigger version of 20 series, widely used in applications where space is of special importance.
Available as single shut-off, double shut-off and straight-through version. High flow efficiency
at low pressure drop.
Application:
Small pneumatic tools, robots, pneumatic systems, industrial sewing machines, packaging
production, medical technology, breathing equipment, diving equipment, measuring technology,
cooling of welding equipment, portable gas heaters, analysers, dosing devices.
Interchangeable: RECTUS 90, CAMOZZI, EWO, KANI.
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
single shut-off
RE-21KAAW10MPX
1/8
14
36
16
RE-21KAAW13MPX
1/4
17
38
16
RE-21KAAW17MPX
3/8
19
38
16
double shut-off
RE-21KBAW10MPX
1/8
14
36
16
RE-21KBAW13MPX
1/4
17
38
16
RE-21KBAW17MPX
3/8
19
38
16
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
single shut-off
RE-21KAIW10MPX
1/8
14
36
16
RE-21KAIW13MPX
1/4
17
38
16
RE-21KAIW17MPX
3/8
19
38
16
double shut-off
RE-21KBIW10MPX
1/8
14
36
16
RE-21KBIW13MPX
1/4
17
38
16
RE-21KBIW17MPX
3/8
19
38
16
563

RECTUS couplings
hose I.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-21KATF04MPX
14
46
16
17
RE-21KATF06MPX
14
46
16
17
RE-21KATF08MPX
14
46
16
17
RE-21KATF09MPX
14
46
16
17
RE-21KATF10MPX
10
14
46
16
17
RE-21KBTF04MPX
14
46
16
17
RE-21KBTF06MPX
14
46
16
17
RE-21KBTF08MPX
14
46
16
17
RE-21KBTF09MPX
14
46
16
17
RE-21KBTF10MPX
10
14
46
16
17
code
single shut-off
double shut-off
thread
size
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
RE-21SFAW10MXX
1/8
14
25
14
RE-21SFAW13MXX
1/4
17
28
14
RE-21SFAW17MXX
3/8
19
28
14
code
straight through
double shut-off
RE-21SBAW10MPX
1/8
14
40
14
RE-21SBAW13MPX
1/4
17
42
14
RE-21SBAW17MPX
3/8
19
42
14
code
thread
size
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
straight through
RE-21SFIW10MXX
1/8
14
25
14
RE-21SFIW13MXX
1/4
17
26
14
RE-21SFIW17MXX
3/8
19
27
14
double shut-off
Plug with hose tail
RE-21SBIW10MPX
1/8
14
40
14
RE-21SBIW13MPX
1/4
17
42
14
RE-21SBIW17MPX
3/8
19
42
14
code
hose I.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
L2
[mm]
straight through
RE-21SFTF04MXX
32
14
17
RE-21SFTF05MXX
32
14
17
RE-21SFTF06MXX
32
14
17
RE-21SFTF08MXX
32
14
17
RE-21SFTF09MXX
33
10
14
17
RE-21SFTF10MXX
10
33
12
14
17
double shut-off
564
RE-21SBTF04MPX
14
50
14
17
RE-21SBTF05MPX
14
50
14
17
RE-21SBTF06MPX
14
50
14
17
RE-21SBTF08MPX
14
50
14
17
RE-21SBTF09MPX
14
50
14
17
RE-21SBTF10MPX
10
14
50
14
17

RECTUS couplings
1400KA series DN 5,5
Flow rate:
1400KA

1423KA type from -20C up to +80C
with any sealing type
1423KA
Material:
The body of socket is made of QPQ treated steel, connection and ferrule of nickel-plated brass,
plug of brass or nickel-plated hardened steel, spring of AISI 301 steel, balls and ring of AISI
420 steel, sealing of NBR. Sockets of 1423KA series have particularly robust, impact resistant,
ergonomic, plastic ferrule.
Description:
The highest quality quick release coupling with a top grade valve for optimum flow performance.
Its design conforms to ISO 6150B (MIL C-4109). For one hand operation with minimum coupling
force.
Application:
Varied industrial applications for compressed air, fluids and gases.
Interchangeable: RECTUS 23 and 24, TEMA 1400, CEJN 310, HANSEN 3000, GROMELLE 600, PARKER 20
and 30 (1/4), JWL 521 and 531.
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-1400KAAK13SPN
1/4
19
65
23
12
RE-1400KAAK17SPN
3/8
19
65
23
12
RE-1400KAAK21SPN
1/2
22
59,5
23
17
RE-1423KAAK13SPN
1/4
19
65
26
12
RE-1423KAAK17SPN
3/8
19
65
26
12
RE-1423KAAK21SPN
1/2
22
59,5
26
17
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-1400KAIW13SPN
1/4
19
59
23
RE-1400KAIW17SPN
3/8
19
59
26
RE-1400KAIW21SPN
1/2
24
62
26
12
RE-1423KAIW13SPN
1/4
19
59
26
RE-1423KAIW17SPN
3/8
19
59
26
RE-1423KAIW21SPN
1/2
24
62
26
12
565

RECTUS couplings
Plug with hose tail
code
hose I.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-1400KATF06SPN
19
80
23
25
RE-1400KATF08SPN
19
80
23
25
RE-1400KATF09SPN
19
80
23
25
RE-1400KATF10SPN
10
19
80
23
25
RE-1400KATF13SPN
13
19
80
23
25
RE-1423KATF06SPN
19
80
26
25
RE-1423KATF08SPN
19
80
26
25
RE-1423KATF09SPN
19
80
26
25
RE-1423KATF10SPN
10
19
80
26
25
RE-1423KATF13SPN
13
19
80
26
25
code
hose I.D.
[mm]
RE-23SFTF04MXN
RE-23SFTF06SXN
RE-23SFTF06MXX
RE-23SFTF08SXN
RE-23SFTF08MXX
RE-23SFTF09SXN
L
[mm]
D
[mm]
L1
[mm]
51
14
25
RE-23SFTF09MXX
RE-23SFTF10SXN
10
RE-23SFTF10MXX
10
RE-23SFTF13SXN
13
code
thread
size
SW
[mm]
L
[mm]
L1
[mm]
RE-23SFAK10SXN
1/8
13
39
1/4
14
42
12
3/8
17
RE-23SFAK21SXN
1/2
22
48
17
RE-23SFAAK13SPN*
1/4
17
68
11
code
thread
size
SW
[mm]
L
[mm]
L1
[mm]
RE-23SFIW10SXN
1/8
14
36
39
12
RE-23SFAK13SXN
RE-23SFAW13MXX
RE-23SFAK17SXN
RE-23SFAW17MXX
* - flex joint
566
RE-23SFIW13SXN
1/4
RE-23SFIW13MXX
1/4
RE-23SFIW17SXN
3/8
RE-23SFIW17MXX
3/8
RE-23SFIW21SXN
1/2
17
19
24

RECTUS couplings
26 series DN 7,2
Flow rate:

actual size
Material:
As a standard the threaded part and the body of a coupling, ferrule, plug and valve are made
of brass, spring and ring of AISI 301 steel, locking pins of AISI 420 steel, sealing of NBR.
Description:
Inexpensive, general purpose quick release coupling. The tight surface body of the coupling
protects inner parts against dirt. Locking pins made of hardened steel are compatible with other
tools equipped with plugs made of steel.
Application:
Varied industry and craft application.
Interchangeable: CEJN 320, RECTUS 25, JWL 520, JWL 530, TEMA 1600, RECTUS 1600/1625.
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
single shut-off
RE-26KAAW10MPX
1/8
22
43
25
RE-26KAAW13MPX
1/4
22
39
25
RE-26KAAW17MPX
3/8
22
41
25
RE-26KAAW21MPX
1/2
22
44
25
12
double shut-off
RE-26KBAW10MPX
1/8
22
43
25
RE-26KBAW13MPX
1/4
22
39
25
RE-26KBAW17MPX
3/8
22
41
25
RE-26KBAW21MPX
1/2
24
42
25
10
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
single shut-off
RE-26KAIW13MPX
1/4
22
41
25
RE-26KAIW17MPX
3/8
22
41
25
RE-26KAIW21MPX
1/2
24
44
25
10
double shut-off
RE-26KBIW13MPX
1/4
22
41
25
RE-26KBIW17MPX
3/8
22
41
25
RE-26KBIW21MPX
1/2
24
44
25
10
567

RECTUS couplings
hose I.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-26KATF06MPX
21
58
25
25
RE-26KATF08MPX
21
58
25
25
RE-26KATF09MPX
21
58
25
25
RE-26KATF10MPX
10
21
58
25
25
RE-26KATF13MPX
13
21
58
25
25
RE-26KBTF06MPX
21
58
25
25
RE-26KBTF08MPX
21
58
25
25
RE-26KBTF09MPX
21
58
25
25
RE-26KBTF10MPX
10
21
58
25
25
RE-26KBTF13MPX
13
21
58
25
25
code
hose
I.D. x O.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-26KAKO06MPX
4x6
21
58
25
13
RE-26KAKO08MPX
6x8
21
45
25
13
RE-26KAKO10MPX
8x10
21
49
25
17
RE-26KAKO12MPX
9x12
21
49
25
17
RE-26KBKO08MPX
6x8
21
45
25
13
RE-26KBKO10MPX
8x10
21
49
25
17
RE-26KBKO12MPX
9x12
21
49
25
17
code
hose
I.D. x O.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-26KAKK08MPX
6x8
21
132
25
13
RE-26KAKK10MPX
8x10
21
143
25
17
RE-26KAKK12MPX
9x12
21
150
27
17
RE-26KBKK08MPX
6x8
21
132
25
13
RE-26KBKK10MPX
8x10
21
143
25
17
RE-26KBKK12MPX
9x12
21
150
25
17
code
single shut-off
double shut-off
Socket with crimp ferrule
single shut-off
double shut-off
Socket for plastic hose
single shut-off
double shut-off
thread
size
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
RE-26SFAW10MXX
1/8
14
31
20
RE-26SFAW13MXX
1/4
17
33
20
RE-26SFAW17MXX
3/8
19
33
20
RE-26SFAW21MXX
1/2
24
38
20
12
code
straight through
568

RECTUS couplings
code
thread
size
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
straight through
Plug with hose tail
RE-26SFIW10MXX
1/8
14
30
20
RE-26SFIW13MXX
1/4
17
33
20
10
RE-26SFIW17MXX
3/8
19
33
20
10
RE-26SFIW21MXX
1/2
24
38
20
12
code
hose I.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
L2
[mm]
straight through
Plug for plastic hose
RE-26SFTF04MXX
48
12
20
25
RE-26SFTF06MXX
48
12
20
25
RE-26SFTF08MXX
48
12
20
25
RE-26SFTF09MXX
48
12
20
25
RE-26SFTF10MXX
10
48
12
20
25
RE-26SFTF13MXX
13
48
15
20
25
code
hose
I.D. x O.D.
[mm]
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
RE-26SFKO06MXX
4x6
34
20
13
RE-26SFKO08MXX
6x8
34
20
15
straight through
Plug for plastic hose with spring

guard
RE-26SFKO10MXX
8x10
17
42
20
17
RE-26SFKO12MXX
9x12
17
42
20
17
code
hose
I.D. x O.D.
[mm]
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
RE-26SFKK06MXX
4x6
120
20
13
RE-26SFKK08MXX
6x8
127
20
13
RE-26SFKK10MXX
8x10
17
135
20
17
RE-26SFKK12MXX
9x12
17
142
20
17
code
hose I.D.
[mm]
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
straight through
Plug with recoil eliminator and

hose tail
RE-26SRTF06MXX
21
67
20
25
RE-26SRTF08MXX
21
67
20
25
RE-26SRTF09MXX
21
67
20
25
RE-26SRTF10MXX
10
21
67
20
25
RE-26SRTF13MXX
13
21
67
20
25
Attention!
- steel plugs - see type 25
- plugs with valves for double shut-off version - see type 25
569

RECTUS couplings - self-venting system
26KE series DN 7,4
Flow rate:

Working temp.: From -20C up to +60C (NBR)
80% of actual size

Material:
Connection:
Venting:
Disconnection:
Remarks:
Both the threaded part and the body of socket are made of brass, locking ferrule is made of
thermoplastic material, valve of brass, spring of AISI 301 steel, locking pins and balls of AISI
420 steel, plug of hardened zinc-plated steel, sealing of NBR.
The couplings connect the same way as 25 series, by pushing the plug into the socket. The
ferrule moves forward during this process and the plug is sealed and locked.
When the ferrule is pulled back, the first locking system is released. The valve of the coupling
closes. Simultaneously the plug is pulled back and interlocked by the spring and air pressure
in the second locking system. Then the compressed air freely escapes outside.
Once the pressure drops in the coupling, the ferrule can be pulled back which causes the
release of the second locking system. The connection can now be safely undone because
there is pressure neither in the hose nor in the plug.
Not recommended for direct connection to pneumatic tools, because vibration and oscillation
shorten service life of the coupling.
Safe operation of the coupling is only possible when it is connected to plugs made of hardened
steel (check 25 series).
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
1/4
22
55
31
self-venting system
RE-26KEAW13MPN
RE-26KEAW17MPN
3/8
22
55
31
RE-26KEAW21MPN
1/2
24
58
31
12
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-26KEIW13MPN
1/4
22
57
31
RE-26KEIW17MPN
3/8
22
57
31
RE-26KEIW21MPN
1/2
24
60
31
12
self-venting system
hose I.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-26KETF06MPN
22
71
31
25
RE-26KETF08MPN
22
71
31
25
RE-26KETF09MPN
22
71
31
25
RE-26KETF10MPN
10
22
71
31
25
RE-26KETF13MPN
13
22
71
31
25
code
self-venting system
570

RECTUS couplings
25 series DN 7,8

DN 7,4
Flow rate:

actual size
Material:
As a standard both the threaded part and the body of a coupling are made of nickel-plated
brass, locking ferrule and plug are made of hardened zinc-plated steel, valve of brass (KA) or
nickel-plated cast iron (KB), spring and ring of AISI 301 steel, balls of AISI 420 steel, sealing
of NBR. Other materials are available on request.
Description:
Robust couplings providing excellent tightness and a very high flow rate due to ULTRA-FLO
valve. For one hand operation.
Application:
All branches of technology, industry and craft - for compressed air, fluids and gases.
Interchangeable: CEJN 320, RECTUS 26, JWL 520, JWL 530, TEMA 1600, RECTUS 1600/1625.
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
single shut-off
RE-25KAAK13MPN
1/4
19
60
23
12
RE-25KAAK17MPN
3/8
19
60
23
12
RE-25KAAK21MPN
1/2
22
61
23
17
RE-25KBAK13BPX
1/4
19
60
23
12
RE-25KBAK17BPX
3/8
19
59
23
10,5
RE-25KBAK21BPX
1/2
22
57,5
23
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
10
double shut-off
single shut-off
RE-25KAIW13MPN
1/4
19
56
23
RE-25KAIW17MPN
3/8
19
55
23
RE-25KAIW21MPN
1/2
24
58
23
12
1/4
19
56
23
10
double shut-off
RE-25KBIW13BPX
RE-25KBIW17BPX
3/8
19
55
23
RE-25KBIW21BPX
1/2
24
58
23
12
571

RECTUS couplings
hose I.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-25KATF06MPN
19
74
23
25
RE-25KATF08MPN
19
74
23
25
RE-25KATF09MPN
19
74
23
25
RE-25KATF10MPN
10
19
74
23
25
RE-25KATF13MPN
13
19
74
23
25
RE-25KBTF06BPX
19
74
23
25
RE-25KBTF08BPX
19
74
23
25
RE-25KBTF09BPX
19
74
23
25
RE-25KBTF10BPX
10
19
74
23
25
RE-25KBTF13BPX
13
19
74
23
25
code
single shut-off
double shut-off
thread
size
SW
[mm]
L
[mm]
L1
[mm]
RE-25SFAK10SXZ
1/8
13
33
20
RE-25SFAK13SXZ
1/4
14
37
20
12
RE-25SFAK17SXZ
3/8
17
37
20
12
RE-25SFAK21SXZ
1/2
22
43
20
17
code
L2
[mm]
straight through
double shut-off
RE-25SBAW10MPX
1/8
22
41
20
RE-25SBAW13MPX
1/4
22
43
20
RE-25SBAW17MPX
3/8
22
43
20
RE-25SBAW21MPX
1/2
22
46
20
12
code
thread
size
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
straight through
RE-25SFIW10SXZ
1/8
14
32
20
RE-25SFIW13SXZ
1/4
17
33
20
RE-25SFIW17SXZ
3/8
19
33
20
RE-25SFIW21SXZ
1/2
24
36
20
12
double shut-off
Plug with hose tail
RE-25SBIW13MPX
1/4
22
43
20
10
RE-25SBIW17MPX
3/8
22
43
20
10
RE-25SBIW21MPX
1/2
24
46
20
12
code
hose I.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
L2
[mm]
straight through
RE-25SFTF06SXZ
48
12
20
25
RE-25SFTF08SXZ
48
12
20
25
RE-25SFTF09SXZ
48
12
20
25
RE-25SFTF10SXZ
10
48
12
20
25
RE-25SFTF13SXZ
13
48
15
20
25
double shut-off
572
RE-25SBTF06MPX
21
60
20
25
RE-25SBTF08MPX
21
60
20
25
RE-25SBTF09MPX
21
60
20
25
RE-25SBTF10MPX
10
21
60
20
25
RE-25SBTF13MPX
13
21
60
20
25

RECTUS couplings - self-venting system
25KE series DN 7,8
Flow rate:

actual size
Material:
As a standard both the threaded part of a socket and the locking ferrule are made of brass, the
body of a coupling is made of zinc-plated steel, valve of brass, spring of AISI 301 steel, locking
pins and balls of AISI 420 steel, plug of hardened zinc-plated steel, sealing of NBR.
Connection:
The couplings connect the same way as 25 series, by pushing the plug into the socket. The
ferrule moves forward during this process and the plug is sealed and locked.
Venting:
When the ferrule is pulled back, the first locking system is released. The valve of the coupling
closes. Simultaneously the plug is pulled back and interlocked by the spring and air pressure in
the second locking system. Then the compressed air freely escapes outside.
Disconnection: Once the pressure drops in the coupling, the ferrule can be pulled back, which causes the
release of the second locking system. The connection can now be safely undone because there
is pressure neither in the hose nor in the plug.
Remarks:
Not recommended for direct connection to pneumatic tools, because vibration and oscillation
shorten service life of the coupling.
Safe operation of the coupling is only possible when it is connected to plugs made of hardened
steel (check 25 series).
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-25KEAK13SPN
1/4
24
62
30
12
RE-25KEAK17SPN
3/8
24
62
30
12
RE-25KEAK21SPN
1/2
24
67
30
17
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-25KEIW13SPN
1/4
24
59
30
10
RE-25KEIW17SPN
3/8
24
56
30
RE-25KEIW21SPN
1/2
24
61
30
10
code
self-venting system
self-venting system
code
hose I.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
self-venting system
RE-25KETF06SPN
24
76
30
25
RE-25KETF08SPN
24
76
30
25
RE-25KETF09SPN
24
76
30
25
RE-25KETF10SPN
10
24
76
30
25
RE-25KETF13SPN
13
24
76
30
25
573

RECTUS couplings
Flow rate:
1600KA

1625KA type from -20C up to +80C
with any sealing type
1625KA
Material:
The body of a socket made of QPQ treated steel, connection and ferrule of nickel-plated brass,
plug of brass or zinc-plated hardened steel, spring of AISI 301 steel, balls and ring of AISI 420
steel, sealing of NBR. Sockets of 1625KA series have particularly robust, impact resistant,
ergonomic, plastic ferrule.
Description:
Another excellent variation of RECTUS 25 quick release coupling with improved flow efficiency
and minimum coupling forces. For one hand operation.
Application:
Suitable for compressed air applications particularly where high flow efficiency is to be achieved
with a small coupling.
Interchangeable: RECTUS 25 and 26, TEMA 1600, CEJN 320, JWL 520 and 530.
574
code
thread
size
SW
[mm]
L
[mm]
RE-1600KAAK13SPN
1/4
RE-1600KAAK17SPN
3/8
19
65
RE-1600KAAK21SPN
1/2
22
59,5
RE-1625KAAK13SPN
1/4
RE-1625KAAK17SPN
3/8
19
65
RE-1625KAAK21SPN
1/2
22
59,5
code
thread
size
SW
[mm]
L
[mm]
RE-1600KAIW13SPN
1/4
RE-1600KAIW17SPN
3/8
19
59
RE-1600KAIW21SPN
1/2
24
62
RE-1625KAIW13SPN
1/4
RE-1625KAIW17SPN
3/8
19
59
RE-1625KAIW21SPN
1/2
24
62
D
[mm]
23
L1
[mm]
12
17
26
12
17
D
[mm]
23
L1
[mm]
9
12
26
9
12

RECTUS couplings
Plug with hose tail
code
hose I.D.
[mm]
RE-1600KATF06SPN
RE-1600KATF08SPN
RE-1600KATF09SPN
RE-1600KATF10SPN
10
RE-1600KATF13SPN
13
RE-1625KATF06SPN
RE-1625KATF08SPN
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
19
80
23
25
19
80
26
25
RE-1625KATF09SPN
RE-1625KATF10SPN
10
RE-1625KATF13SPN
13
code
hose I.D.
[mm]
RE-25SFTF06SXZ
RE-25SFTF08SXZ
RE-25SFTF09SXZ
RE-25SFTF10SXZ
10
RE-25SFTF13SXZ
13
code
thread
size
SW
[mm]
L
[mm]
L1
[mm]
RE-25SFAK10SXZ
1/8
13
33
RE-25SFAK13SXZ
1/4
14
RE-25SFAK17SXZ
3/8
17
37
12
RE-25SFAK21SXZ
1/2
22
43
17
code
thread
size
SW
[mm]
L
[mm]
L1
[mm]
RE-25SFIW10SXZ
1/8
14
30
RE-25SFIW13SXZ
1/4
17
RE-25SFIW17SXZ
3/8
19
33
RE-25SFIW21SXZ
1/2
24
36
12
L
[mm]
48
D
[mm]
12
L1
[mm]
25
15
575

RECTUS couplings
27 series DN 10
Flow rate:

80% of actual size
Material:
As a standard both the threaded part and the body of a socket are made of brass, locking
ferrule and plug are made of hardened zinc-plated steel, valve of brass, spring and ring of AISI
301 steel, balls of AISI 420 steel, sealing of NBR. Other materials are available on request.
Description:
Optimum flow efficiency with respect to the size of the coupling is obtained by ULTRA-FLO
valve. For one hand operation. Approved operation at low and high temperatures.
Application:
Due to its extremely strong and robust design the coupling is used in heavy industry.
Interchangeable: CEJN 410, RECTUS 41, RECTUS 1700/1727, TEMA 1700.
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
single shut-off
RE-27KAAK13MPN
1/4
24
63
27
12
RE-27KAAK17MPN
3/8
24
63
27
12
RE-27KAAK21MPN
1/2
24
65
27
17
RE-27KAAK26MPN
3/4
27
65
27
17
RE-27KBAK13BPX
1/4
24
63
27
12
RE-27KBAK17BPX
3/8
24
63
27
12
RE-27KBAK21BPX
1/2
24
65
27
17
RE-27KBAK26BPX
3/4
27
65
27
17
double shut-off
code
single shut-off
RE-27KATF06MPN
RE-27KATF08MPN
RE-27KATF09MPN
RE-27KATF10MPN
RE-27KATF13MPN
RE-27KATF16MPN
RE-27KATF19MPN
double shut-off
RE-27KBTF06BPX
RE-27KBTF08BPX
RE-27KBTF09BPX
RE-27KBTF10BPX
RE-27KBTF13BPX
RE-27KBTF16BPX
RE-27KBTF19BPX
576
hose I.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
6
8
9
10
13
16
19
24
24
24
24
24
24
24
76
76
76
76
76
76
76
27
27
27
27
27
27
27
25
25
25
25
25
25
25
6
8
9
10
13
16
19
24
24
24
24
24
24
24
76
76
76
76
76
76
76
27
27
27
27
27
27
27
25
25
25
25
25
25
25

RECTUS couplings
code
single shut-off
RE-27KAIW13MPN
RE-27KAIW17MPN
RE-27KAIW21MPN
RE-27KAIW26MPN
double shut-off
RE-27KBIW13BPX
RE-27KBIW17BPX
RE-27KBIW21BPX
RE-27KBIW26BPX
code
single shut-off
RE-27SFAK13SXN
RE-27SFAK17SXN
RE-27SFAK21SXN
RE-27SFAK26SXN
double shut-off
RE-27SBAK13MPX
RE-27SBAK17MPX
RE-27SBAK21MPX
RE-27SBAK26MPX
code
single shut-off
RE-27SFIW13SXN
RE-27SFIW17SXN
RE-27SFIW21SXN
RE-27SFIW26SXN
double shut-off
RE-27SBIW13MPX
RE-27SBIW17MPX
RE-27SBIW21MPX
RE-27SBIW26MPX
Plug with hose tail
code
single shut-off
RE-27SFTF06SXN
RE-27SFTF08SXN
RE-27SFTF09SXN
RE-27SFTF10SXN
RE-27SFTF13SXN
RE-27SFTF16SXN
RE-27SFTF19SXN
double shut-off
RE-27SBTF06MPX
RE-27SBTF08MPX
RE-27SBTF09MPX
RE-27SBFF10MPX
RE-27SBTF13MPX
RE-27SBTF16MPX
RE-27SBTF19MPX
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
1/4
3/8
1/2
3/4
24
24
24
27
56
56
56
60
27
27
27
27
10
11
12
16
1/4
3/8
1/2
3/4
24
24
24
32
56
56
56
60
27
27
27
27
10
11
12
16
thread
size
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
1/4
3/8
1/2
3/4
17
17
22
27
40
40
45
48
21,5
21,5
21,5
21,5
12
12
17
19
1/4
3/8
1/2
3/4
24
24
24
27
60,5
60,5
62,5
62,5
21,5
21,5
21,5
21,5
12
12
17
17
thread
size
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
1/4
3/8
1/2
3/4
17
19
24
32
33
33
37
42
21,5
21,5
21,5
21,5
9
12
12
16
1/4
3/8
1/2
3/4
24
24
24
32
54,5
54,5
54,5
58,5
21,5
21,5
21,5
21,5
9
9
12
16
hose I.D.
[mm]
SW
[mm]
6
8
9
10
13
16
19
6
8
9
10
13
16
19
24
24
24
24
24
24
24
L
[mm]
D
[mm]
L1
[mm]
L2
[mm]
48
48
48
48
48
48
49
15
15
15
15
15
18
21
21,5
21,5
21,5
21,5
21,5
21,5
21,5
25
25
25
25
25
25
25
21,5
21,5
21,5
21,5
21,5
21,5
21,5
25
25
25
25
25
25
25
74
74
74
74
74
74
74
577

RECTUS couplings
57 series DN 12
Flow rate:

70% of actual size
Material:
Description:
Application:
As a standard the threaded part of a socket is made of brass, the body of a coupling is made of
zinc-plated steel, ferrule and plug are made of hardened zinc-plated steel, valve of brass, spring
and ring of AISI 301 steel, balls of AISI 420 steel, sealing of NBR.
Due to its size and high flow rate 57 series couplings are commonly used in compressed air distribution
systems. Suitable for fluids as well.
Widely used in various branches of industry.
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-57KBAW21SPN
1/2
34
98
40
12
RE-57KBAW26SPN
3/4
34
100
40
16
RE-57KBAW33SPN
41
100
40
19
code
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-57KBIW21SPN
1/2
34
100
40
19
RE-57KBIW26SPN
3/4
34
100
40
16
RE-57KBIW33SPN
41
101
40
20
code
double shut-off
double shut-off
hose I.D.
[mm]
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
RE-57KBTF16SPN
16
34
122
40
36
RE-57KBTF19SPN
19
34
122
40
36
code
double shut-off
578

RECTUS couplings
thread
size
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
RE-57SBAW17SPN
3/8
34
86
30
12
RE-57SBAW21SPN
1/2
34
83
30
12
RE-57SBAW26SPN
3/4
34
85
30
16
RE-57SBAW33SPN
41
85
30
19
code
thread
size
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
RE-57SBIW21SPN
1/2
34
85
30
19
RE-57SBIW26SPN
3/4
34
85
30
16
code
hose I.D.
[mm]
SW
[mm]
L
[mm]
L1
[mm]
L2
[mm]
RE-57SBTF13SPN
13
34
101
30
28
RE-57SBTF16SPN
16
34
107
30
36
RE-57SBTF19SPN
19
34
107
30
36
code
double shut-off
double shut-off
Plug with hose tail
double shut-off
RECTUKEY couplings - with coded system

Coded couplings systems are used wherever an
accidental wrong socket - plug connection is not
acceptable because of the risk of media mix-up.
The socket and the respective plug are colour coded
and the connecting parts are of the same shape.
The system is used for 21 and 25 series couplings.
green
brown
blue
red
579

TEMA couplings
The following table enables finding the series, material and sealing of a coupling proper for the medium.
medium
compressed air
water
(up to +80C)
water
(over) +80C)
steam
(up to +150C)
gases
diesel oil
petrol
heating oil
hydraulic oil
engine oil
A - recommended
B - conditional application
580
DN
series
5,5
6
6,8
10,4
22
5,5
6,8
10,4
22
5
6,8
10
6,8
10,5
5,5
6,8
10,4
22
5
6,8
10
6,8
10,5
5
10
5,5
6,8
10,4
5
6,8
10
5
6,8
10
5
6,8
10
5
6,8
10
5
6,8
10
1100
1400
1300
1800
2100
1100
1300
1800
2100
1100N
1300N
1800N
1300H
1800H
1100
1300
1800
2100
1100N
1300N
1800N
1300H
1800H
1100N
1800N
1100
1300
1800
1100N
1300N
1800N
1100N
1300N
1800N
1100N
1300N
1800N
1100N
1300N
1800N
1100N
1300N
1800N
sealing
NBR
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
B
B
B
B
B
B
A
A
A
A
A
A
Viton
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
-
material
EPDM
A
A
A
A
A
A
A
A
A
B
B
-
steel
A
A
A
A
A
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
brass
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
max. working press.

[bar]
30
30
30
30
20
30
30
30
20
50
50
50
100
100
30
30
30
20
50
50
50
100
100
10
10
30
30
30
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50

TEMA couplings
1100 series DN 5,5
Flow rate:

Material:
The socket is made of nickel- and chrome-plated brass, springs and balls of stainless steel, plug
of zinc-plated hardened steel.
Description: General purpose couplings designed for compressed air, water, oil, fuel and gases. User friendly.
High flow rate with small outer dimensions. The service life of seals is very long as they do not come
into direct contact with the medium. The seal of the socket can be changed under pressure without
any special tools.
fibre seal
socket with
female thread
fitting with hose tail

and male thread
description
code
socket with
male thread
plug with
female thread
male
thread
G
[inch]
female
thread
G
[inch]
TA-P-1100
socket
TA-P-1100A
TA-P-1105

and male thread
TA-P-1106
plug with male thread
TA-P-11110
plug with female thread
TA-P-11410
plug with hose tail
DN
[mm]
1/8
1/4
TA-P-1100V
TA-P-1100AV
plug with
male thread
1/8
1/4
5,5
seal
plug with
a hose tail
D
[mm]
L
[mm]
spanner
size
[mm]
working
pressure
[bar]
30
NBR
18
37
15
NBR
18
38
15
hose
I.D.
[mm]
weight
[g]
40
1)
35
1)
Viton
18
37
15
40
1)
Viton
18
38
15
35
1)
27
12
30
9,5
27
12
30
9,5
27
12
30
10
9,5
34
1/8
1/8
1/8
TA-P-11005
TA-P-11006
30
socket cap
TA-P-2315
PVC
plug cap
TA-P-125
PVC
TA-P-11310N
NBR
TA-P-11310V
Viton
O-ring
fibre seal
remarks
TA-P-11320
remarks:
1) version without valve is marked with UV at the end of a code
The 1100 series couplings must not be connected with 1100N series.
581

TEMA couplings
1100N series DN 4,8
Flow rate:
Kv = 0,57 for water

(9,5 l/min at p = 1 bar)
Material:
of brass.
Description: General purpose double shut-off couplings designed for water, steam, oil and fuel. User friendly. High
flow rate with small outer dimensions. The service life of seals is very long as they do not come into
direct contact with the medium. The seal of a socket can be changed under pressure without any
special tools.
socket with
female thread
socket with
male thread
fibre seal
and male thread
description
socket

and male thread
socket cap
plug cap
O-ring
fibre seal
code
TA-P-1100N
TA-P-1100NEP
TA-P-1100NA
TA-P-1100NV
TA-P-1100NAV
TA-P-1105
TA-P-1106
TA-P-11410MN
TA-P-11410MEP
TA-P-11410MV
TA-P-2315
TA-P-125
TA-P-11310N
TA-P-11310EP
TA-P-11310V
TA-P-11320
male
thread
G
[inch]
plug with
female thread
female
thread
G
[inch]
DN
[mm]
seal
4,8
NBR
EPDM
NBR
Viton
Viton
1/8
1/4
1/8
1/4
remarks:
1) max. working pressure for steam is 10 bar
2) made of brass
The 1100N series couplings must not be connected with 1100 series couplings.
582
NBR
EPDM
Viton
PVC
PVC
NBR
EPDM
Viton
working
pressure
[bar]
L
[mm]
18
37
37
38
37
38
15
50
27
12
30
36
15
20
1/8
1/8
spanner
size
[mm]
D
[mm]
9,5
hose
I.D.
[mm]
weight
[g]
5
6
40
40
35
40
35
7
8
20
20
20
3
3
remarks
1)
1)
1)
1)
1)
1),2)
1),2)
1),2)

TEMA couplings
1300 series DN 6,8
Flow rate:

Material:
of zinc-plated, hardened steel or brass. AISI 316 steel version is available on request.
Description: General purpose couplings designed for compressed air, water, oil, fuel and gases. User friendly
1300E version is for one hand operation. High flow rate with small outer dimensions. Service life of
the seals is very long as they do not come into direct contact with the medium. The seal of a socket
can be changed under pressure without any special tools.
socket with
female thread
plug with
male thread
description
socket
socket E (one hand)
E socket with hose tail

(one hand)

and male thread
socket with
male thread
E socket with
female thread
fibre seal
plug with
a hose tail
code
TA-P-1300
TA-P-1300A
TA-P-1300B
TA-P-1300V
TA-P-1300RV
TA-P-1300AV
TA-P-1300BV
TA-P-1300BRV
TA-P-1300E
TA-P-1300EA
TA-P-1300EB
TA-P-1300EC
TA-P-1300ED
TA-P-1300EEB
TA-P-1300EK06
TA-P-1300EK08
TA-P-1300EK10
TA-P-1300EK12
TA-P-1300EEK10
TA-P-1306
TA-P-1308
TA-P-1310
TA-P-1312
E socket with
male thread
casing
male
thread
G
[inch]
female
thread
G
[inch]
DN
[mm]
1/4
3/8
3/8
1/4
1/4
6,8
3/8
3/8
1/4
3/8T
3/8
1/4T
1/2
7,4
3/8
4,8
6,4
7,4
1/4
seal
NBR
NBR
NBR
Viton
Viton
Viton
Viton
Viton
NBR
NBR
NBR
NBR
NBR
NBR
NBR
NBR
NBR
NBR
NBR
D
[mm]
22
22
26
22
26
coupling with
a hose tail
plug with
female thread
L
[mm]
spanner
size
[mm]
49
18
50
20
49
18
50
20
55
56
55
58
57
55

and male thread.
working
pressure
[bar]
30
19
20
19
23
20
30
78
19
30
77
78
37
38
hose
I.D.
[mm]
16
30
6
8
10
12
10
6
8
10
12
weight
[g]
81
75
86
81
76
75
86
81
96
88
94
92
108
100
98
99
100
101
110
16
17
19
21
remarks
3)
3)
3)
3)
3),5)
3)
3)
3),5)
2)
2)
583

TEMA couplings
description
plug with hose tail

socket cap
plug cap
seals
O-ring (1300E)
casing
fibre seal
code
TA-P-13110
TA-P-13110R
TA-P-13110M
TA-P-13210
TA-P-13210A
TA-P-13210M
TA-P-13220
TA-P-13230
TA-P-13405
TA-P-13410
TA-P-13410R
TA-P-13411M
TA-P-13420
TA-P-13006
TA-P-13008
TA-P-13010
TA-P-13012
TA-P-1315
TA-P-1325
TA-P-13310N
TA-P-13310V
TA-P-N7-9.3
TA-P-1300-351
TA-P-13320
male
thread
G (4)
[inch]
female
thread
G
[inch]
D
[mm]
L
[mm]
spanner
size
[mm]
working
pressure
[bar]
35
35
13
13
30
hose
I.D.
[mm]
10
12
1/8
1/4
12
1/4
3/8
made of brass, suitable for water

TURBO version
version without a valve is marked with UV at the end of a code
T - cone thread
AISI 316 steel
584
seal
1/8T
1/8T
1/8
1/4
1/4T
1/4
3/8T
1/2T
remarks:
1)
2)
3)
4)
5)
DN
[mm]
12
38
38
35
38
40
32
14
14
16
17
22
13
36
16
44
36
18
20
44
47
PVC
PVC
NBR
Viton
NBR
PVC
33
73
30
10
30
30
10
30
30
6
7
10
12
weight
[g]
17
17
17
23
23
25
27
38
17
23
23
39
28
14
15
16
22
5
3
15
remarks
5)
1)
1)
5)
1)

TEMA couplings
1300N series DN 5,8
Flow rate:
Kv = 0,81 for water

Material:
The socket is made of nickel- and chrome-plated brass, springs and balls of stainless steel, plug of
zinc-plated hardened steel or brass.
Description: General purpose double shut-off couplings designed for compressed water, steam, oil and fuel. User
friendly. High flow rate with small outer dimensions. Service life of the seals is very long as they do
not come into direct contact with the medium. The seal of a socket can be changed under pressure
without any special tools.
socket with
female thread

and male thread.
description
socket

and male thread

socket cap
plug cap
O-ring
casing
fibre seal
code
TA-P-1300N
TA-P-1300NA
TA-P-1300NB
TA-P-1300NV
TA-P-1300NAV
TA-P-1300NBV
TA-P-1306
TA-P-1308
TA-P-1310
TA-P-1312
TA-P-13410MN
TA-P-13410STN
TA-P-13410MNV
TA-P-13410STNV
TA-P-1315
TA-P-1325
TA-P-13310N
TA-P-13310V
TA-P-1300-351
TA-P-13320
male
thread
G
[inch]
socket with
male thread
plug with
female thread
female
thread
G
[inch]
DN
[mm]
seal
5,8
NBR
NBR
NBR
Viton
Viton
Viton
1/4
3/8
3/8
1/4
casing
3/8
3/8
D
[mm]
22
1/4
1/4
NBR
NBR
Viton
Viton
PVC
PVC
NBR
Viton
PVC
L
[mm]
spanner
size
[mm]
49
18
50
20
49
18
50
20
working
pressure
[bar]
hose
I.D.
[mm]
weight
[g]
6
8
10
12
81
75
86
81
75
86
16
17
19
21
42
40
42
40
5
3
50
37
16
30
12
44
18
20
50
20
50
33
73
remarks
1)
1)
1)
1)
1)
1)
1),2)
1),3)
1),2)
1),3)
15
remarks:
2) made of brass
3) made of steel
The 1300N series couplings must not be connected with 1300 series couplings.
585

TEMA couplings
1800 series DN 10,4
Flow rate:

Material:
zinc-plated hardened steel or brass. AISI 316 steel version is also available.
Description: General purpose couplings designed for compressed air, water, oil, fuel and gases. User friendly.
1800E version is for one hand operation. High flow rate with small outer dimensions. Service life of
the seals is very long as they do not come into direct contact with the medium. The seal of a socket
can be changed under pressure without any special tools.
socket with
female thread
socket with
male thread
E socket with
female thread
plug with
male thread

and male thread.
socket
socket E (one hand)
586
code
TA-P-1800
TA-P-1800A
TA-P-1800B
TA-P-1800C
TA-P-1800L
TA-P-1800SV
TA-P-1800RV
TA-P-1800V
TA-P-1800AV
TA-P-1800ARV
TA-P-1800BV
TA-P-1800BRV
TA-P-1800CV
TA-P-1800ST
TA-P-1800AST
TA-P-1800BST
TA-P-1800E
TA-P-1800EA
TA-P-1800EB
TA-P-1800EE
male
thread
G (12)
[inch]
female
thread
G
[inch]
metal plug casing

DN
[mm]
3/8
1/2
1/2
3/4
3/8
10,4
1/2
1/2
3/4
3/8
1/2
1/2
3/8
1/2T
1/2
3/8
plug with
a hose tail
plug with
female thread
casing
description
E socket with
male thread
10,2
seal
NBR
NBR
NBR
NBR
NBR
Viton
Viton
Viton
Viton
Viton
Viton
Viton
Viton
NBR
NBR
NBR
NBR
NBR
NBR
NBR
D
[mm]
L
[mm]
spanner
size
[mm]
54
22
55
57
24
30
54
22
27
30
55
57
27
30
working
pressure
[bar]
24
30
54
22
55
60
64
61
60
24
23
24
23
30
hose
I.D.
[mm]
weight
[g]
125
115
130
160
125
125
115
125
115
110
130
135
160
122
112
127
146
140
146
157
remarks
11)
11)
11)
11)
2),11)
3),11)
4),7),11)
11)
11)
4),7)11)
11)
4),7)11)
11)
9),11)
9),11)
9),11)
10)

TEMA couplings
description

and male thread
plug with hose tail
socket cap
plug cap
casing
metal plug casing
seals
fibre seal
code
TA-P-1806
TA-P-1808
TA-P-1810
TA-P-1810R
TA-P-1812
TA-P-1812R
TA-P-1816
TA-P-1816R
TA-P-1819
TA-P-1912
TA-P-18105
TA-P-18110
TA-P-18110MS
TA-P-18210
TA-P-18210R
TA-P-18210SV
TA-P-18220
TA-P-18220M
TA-P-18230
TA-P-18405
TA-P-18410
TA-P-18410R
TA-P-18411M
TA-P-18420
TA-P-18006
TA-P-18008
TA-P-18010
TA-P-18010M
TA-P-18012
TA-P-18012M
TA-P-18016
TA-P-18019
TA-P-5025
TA-P-2525
TA-P-1800-35
TA-P-1800-351
TA-P-18415
TA-P-18310N
TA-P-18310V
TA-P-18310NE
TA-P-18320
male
thread.
G (12)
[inch]
female
thread
G
[inch]
DN
[mm]
seal
D
[mm]
L
[mm]
spanner
size
[mm]
working
pressure
[bar]
hose
I.D.
[mm]
30
6
8
10
10
12
12
16
16
19
12
38
19
3/8
39
1/8T
1/4T
1/4
3/8T
3/8
3/8
1/2T
1/2
3/4T
16
43
36
39
36
38
16
36
19
40
40
43
22
1/4
36
3/8
16
49
39
1/2
44
16
45
46
PVC
PVC
PVC
PVC
37
23
NBR
Viton
NBR
41
78
27
21
30
10
17
27
16
20
22
30
10
30
30
25
30
10
30
10
30
6
8
10
10
12
12
16
19
weight
[g]
21
23
25
22
29
27
29
27
34
36
26
29
29
30
31
35
41
44
66
30
33
41
60
53
20
22
24
24
27
27
26
32
10
20
45
remarks
4)
4)
4)
5)
6)
4)
3)
1)
4)
1)
1)
1)
8)
13)
remarks:
1) made of brass, suitable for water
2) TA-P-1800L socket has a safety locking protection against unintentional disconnection
3) TA-P-1800SV socket can only be connected with TA-P-18210SV plug
4) made of stainless steel AISI 316
5) made of steel
6) plug TA-P-18110MS equipped with filter
7) max. working pressure for liquids is 50 bar
8) can be coupled with all plugs except TA-P-18210SV
9) locking ring made of steel
10) TURBO version
11) version without valve is marked with UV at the end of a code
12) T - cone thread
13) for TA-P-1800E socket
The 1800 series couplings must not be connected with 1800N series.
587

1800N series DN 9,5
Flow rate:
Kv = 2,08 for water

Material:
zinc-plated, hardened steel or brass. AISI 316 steel version is also available.
Description: General purpose double shut-off couplings designed for compressed water, steam, oil and fuel. User
friendly. High flow rate with small outer dimensions. Service life of the seals is very long as they do
not come into direct contact with the medium. The seal of a socket can be changed under pressure
without any special tools.
socket with
female thread
description
socket

and male thread
socket cap
plug cap
O-ring
casing
metal plug casing
fibre seal
socket with
male thread
code
male
thread
G
[inch]
TA-P-1800N
TA-P-1800NA
1/2
TA-P-1800NB
TA-P-1800NBA
TA-P-1800NC
TA-P-1800NV
TA-P-1800NAV
1/2
TA-P-1800NBV
TA-P-1800NCV
TA-P-1806
TA-P-1808
TA-P-1810
3/8
TA-P-1812
TA-P-1816
TA-P-1819
TA-P-18410MN
TA-P-18410STN
TA-P-18420MN
1/2 NPTF
TA-P-18422MNA
TA-P-18410MNV
TA-P-18410STV
TA-P-18422MNAV
TA-P-5025
TA-P-2525
TA-P-18310N
TA-P-18310V
TA-P-1800-35
TA-P-1800-351
TA-P-18415
TA-P-18320
remarks:
2) made of brass
3) made of steel
588
fibre seal

and male thread.
female
thread
G
[inch]
DN
[mm]
seal
9,5
NBR
NBR
NBR
EPDM
NBR
Viton
Viton
Viton
Viton
3/8
1/2
1/2
3/4
3/8
1/2
3/4
plug with
female thread
D
[mm]
L
[mm]
spanner
size
[mm]
54
22
57
24
25
30
54
22
55
57
24
30
55
27
metal plug casing
casing
working
pressure
[bar]
hose
I.D.
[mm]
50
38
19
30
22
10
50
47
52
25
10
49
22
52
25
39
3/8
1/2
3/8
1/2
NBR
NBR
NBR
NBR
Viton
Viton
Viton
PVC
PVC
NBR
Viton
PVC
PVC
49
16
37
23
50
10
41
78
27
6
8
10
12
16
19
weight
[g]
125
115
130
138
160
125
115
130
160
21
23
25
29
29
34
70
65
60
90
70
65
90
remarks
1)
1)
1)
1),5)
1)
1)
1)
1)
1)
1),2)
1),3)
1),2),4)
1),5)
1),2)
1),3)
1),5)
10
20
45
4) male thread 1/2 NPTF

5) made of brass resistant to dezincification
The 1800N series couplings must not be connected with 1800 series.

TEMA couplings
2100 series DN 22
Flow rate:

Material:
The socket is made of brass, ferrule of zinc-plated steel, springs and balls of stainless steel, plug
of zinc-plated and hardened steel.
Description: General purpose large diameter couplings designed mainly for compressed air. Suitable for fluids.
High flow rate with small outer dimensions. Service life of the seals is very long as they do not come
into direct contact with the medium. The seal of a socket can be changed under pressure without
any special tools. The design of the coupling enables venting before disconnection.
fibre seal
socket with
female thread
description
socket
and male thread
plug with hose tail
socket cap
plug cap
O-ring
fibre seal
fitting with hose tail and

male thread
code
TA-P-2100
TA-P-2100V
TA-P-2119
TA-P-2125
TA-P-2132
TA-P-21210
male
thread
G
[inch]
plug with
male thread
plug with
a hose tail
female
thread
G
[inch]
DN
[mm]
seal
D
[mm]
L
[mm]
spanner
size
[mm]
working
pressure
[bar]
22
NBR
Viton
48
48
82
82
41
41
20
57
37
1
1
TA-P-21019
TA-P-21025
TA-P-21032
TA-P-10026
TA-P-5025
TA-P-21310N
TA-P-21310V
TA-P-21320
29
29
64
37
57
36
74
79
PVC
PVC
NBR
Viton
20
hose
I.D.
[mm]
19
25
32
20
20
weight
[g]
570
570
122
150
200
remarks
1)
1)
140
19
25
32
120
140
200
54
23
remarks:
1) version without valve is marked with UV at the end of a code.
589

TEMA couplings
1300H series DN 6,8
Flow rate:
Kv = 2,45 for water

Material:
zinc-plated hardened steel or brass.
Description: Couplings without valves are designed for high pressure water. User friendly. High flow rate with
small outer dimensions.
socket with
female thread
description
socket
seals
code
plug with
male thread
male
thread
G (3)
[inch]
TA-P-1300H
TA-P-1300HV
TA-P-13110
TA-P-13110M
TA-P-13210
TA-P-13210M
TA-P-13220
TA-P-13230
TA-P-13405
TA-P-13410
TA-P-13411M
TA-P-13420
TA-P-13310N
TA-P-13310V
remarks:
1) made of brass
2) working pressure given for plugs - only for fluids
3) T - cone thread
590
plug with
female thread
female
thread
G
[inch]
DN
[mm]
seal
D
[mm]
L
[mm]
spanner
size
[mm]
working
pressure
2)
[bar]
1/4
6,8
NBR
Viton
22
41
18
100
35
13
38
35
38
40
32
36
44
36
14
16
17
22
13
16
18
20
1/8T
1/8
1/4
1/4
3/8T
1/2T
12
1/8
1/4
12
3/8
NBR
Viton
100
10
100
10
100
100
10
100
hose
I.D.
[mm]
weight
[g]
70
70
17
17
23
25
27
38
17
23
39
28
remarks
1)
1)
1)

TEMA couplings
1800H series DN 10,5
Flow rate:
Kv = 5,2 for water

Material:
zinc-plated hardened steel or brass. AISI 316 is available on request.
Description: Couplings without valves are designed for high pressure water. User friendly. High flow rate with
small outer dimensions.
socket with
female thread
description
socket
seals
code
plug with
male thread
male
thread
G (4)
[inch]
TA-P-1800H
TA-P-1800HV
TA-P-18105
TA-P-18110
TA-P-18110A
TA-P-18210
TA-P-18210R
TA-P-18220
TA-P-18220M
TA-P-18230
TA-P-18405
TA-P-18410
TA-P-18410R
TA-P-18411M
TA-P-18420
TA-P-18310N
TA-P-18310V
plug with
female thread
female
thread
G
[inch]
DN
[mm]
seal
D
[mm]
L
[mm]
spanner
size
[mm]
working
pressure
(3)
[bar]
3/8
10,5
NBR
Viton
27
43
22
100
36
16
38
36
17
19
40
22
43
35
36
27
16
20
36
22
39
25
1/8T
1/4
1/4T
3/8
3/8
1/2T
1/2
3/4T
16
1/4
3/8
16
1/2
100
100
10
100
hose
I.D.
[mm]
weight
[g]
100
100
26
29
31
30
31
41
44
66
30
33
41
60
53
remarks
2)
1)
2)
1)
NBR
Viton
remarks:
1)
2)
3)
4)
made of brass
made of stainless steel
working pressure given for plugs - only for fluids
T - cone thread
591

HANSEN BEVERAGE PRODUCTS
couplings for food industry
TUBES INTERNATIONAL supplies HANSEN BEVERAGE PRODUCTS couplings. This name stands for a group
of couplings (called PEPSI couplings) that are widely used in food and pharmaceutical industry. They are used
by leading diary producers. The couplings are usually made of acid-resistant steel, can be used for gas and fluid
(depending on the series). Spare parts for these couplings (valves, seals, springs etc.) are also available in our offer.
For proper coupling selection, please try to specify its application precisely and contact Sales or Technical Department
of TUBES INTERNATIONAL
592

HANSEN BEVERAGE PRODUCTS couplings for food industry
identification ring
2HG / 2HL series
identification groove

Characteristics: All parts in contact with the medium are made of acid-resistant steel. The couplings are available
in two versions: for gases and for fluids. These two versions are not interchangeable (different
plug dimension), to avoid wrong connection. Easy to distinguish. Couplings for gases - white
identification ring on a socket and a groove on the hexagon of a plug. Couplings for fluids - black
identification ring on a coupling and a lack of groove on the hexagon of a plug.
code
hose I.D.
[inch]
medium
HB-2HGRB
1/4
gases
HB-2HLRB
1/4
liquids
code
hose I.D.
[inch]
medium
HB-2HGBNB
1/4
HB-2HGDNB
3/8
HB-2HLBNB
1/4
HB-2HLDNB
3/8
code
thread size
[inch]
medium
HB-2HG720
7/16-20
gases
HB-2HL720
7/16-20
liquids
code
thread size
[inch]
medium
HB-2HGLLRA720
7/16-20
gases
HB-2HLLLRA720
7/16-20
liquids
gases
liquids
description
90 socket with
hose tail.
description
Socket with hose

tail.
description
Socket with an UNF

male thread
(90 cone).
description
90 socket with an
UNF male thread
(90 cone)..
593

HANSEN BEVERAGE PRODUCTS couplings for food industry
code
thread size
[inch]
HB-2HG15
1/4
HB-2HG20
3/8
HB-2HL15
1/4
HB-2HL20
3/8
code
thread size
[inch]
medium
HB-2HG16
1/4
gases
HB-2HL16
1/4
liquids
code
medium
gases
gases
liquids
Socket with a NPT

male thread.
liquids
medium
HB-LN2HGA
HB-LN2HGB
HB-LN2HGC
HB-LN2HLA
HB-LN2HLB
HB-LN2HLC
description
description
Socket with a NPT

female thread.
description
Socket without valve.
Socket with a valve.
Socket with a valve and seal.
Socket without valve.
Socket with a valve.
Socket with a valve and seal.
2-HG and 2-HL socket components
pic.
description
HB-SE2HGLRB
HB-SE2HGLLLRA720 90 connection with male thread 7/16-20 UNF
HB-SE2HGLBNB
1/4 hose tail + nut
HB-SE2HGLDN
Nut for a fitting with hose tail
5
6
90 connection with 1/4 hose tail
HB-W2HGL1
Rubber seal
HB-SE2HGLBNB1
1/4 hose tail
HB-SE2HGLDNB1
HB-SE2HGL720
HB-SE2HGL16
10
HB-4BSVAB
3/8 hose tail

Connection with 1/4 NPT male thread
x 11/16-18 UNF female thread
Connection with 7/16-20 UNF male thread
Connection with 1/4 NPT female thread
Valve
594
code
HB-SE2HGL15
HB-SE2HGL20
11
HB-2HG01A
Socket body for gases
12
HB-2HL01A
Socket body for liquids
13
HB-2HGL01B1
White identification ring (liquids)
14
HB-2HGL01B2
Black identification ring (gases)
15
HB-2104A302
Locking balls (3 pieces)
16
HB-3S05
Ferrule spring
17
HB-2HGL02
Ferrule
18
HB-3S06
Retaining ring

code
thread size
[inch]
medium
HB-2KGF
9/16-18 UNF
gases
description
Plug.
HB-2KLF
5/8-18 UNF
liquids
2-KG-F and 2-KL-F plug components

pic.
code
description
HB-902-9-292
O-ring.
HB-2KL01F
Plug body 5/8-18 UNF female thread (liquids)
HB-2KG01F
Plug body 9/16-18 UNF female thread (gases)
HB-VA2KGLFA
Valve
code
thread size
[inch]
HB-2KGF16
1/4 NPT
HB-2KGF720
7/16-20 UNF
HB-2KLF16
1/4 NPT
HB-2KLF720
7/16-20 UNF
code
thread size
[inch]
HB-2KGF15
1/4 NPT
HB-2KGF20
3/8 NPT
HB-2KLF15
1/4 NPT
HB-2KLF20
3/8 NPT
medium
gases
liquids
description
Plug with female

thread.
medium
gases
liquids
description
Plug with male

thread.
2-KG-F and 2-KL-F plug components

pic.
1
2
3
4
5
code
HB-9029292
HB-2KL01F
HB-2KG01F
HB-VA2KGLFA
HB-9027292
HB-PE2KGF1601
HB-PE2KLF1601
HB-PE2KGF72001
HB-PE2KLF72001
HB-PE2KGF1501
HB-PE2KLF1501
HB-PE2KGF2001
HB-PE2KLF2001
description
O-ring
Plug body 5/8-18 UNF female thread (liquids)
Plug body 9/16-18 UNF female thread (gases)
Valve
O-ring
Connection with 1/4 NPT female thread
(plug 2KG-F16, liquids)
connection with 1/4 NPT female thread
(plug 2KG-F16, gases)
Connection with 7/16-20 UNF female thread
Connection with 7/16-20 UNF female thread
595

code
thread size
[inch]
medium
HB-2KGC
11/16-18 UNF
gases
HB-2KLC
3/4-18 UNF
liquids
description
Plug without
connection part with
plastic insert.
2-KG-C and 2-KL-C plug components

pic.
code
description
1
2
3
4
5
HB-902-9-292
HB-2KL01C
HB-2KG01C
HB-PVA372381
HB-NPI3723
O-ring.
Plug body with a fem. thread 3/4-18 UNF (liquids).
Plug body with a fem. thread 11/16-18 UNF (gases).
Valve.
Plastic insert.
code
thread size
[inch]
medium
HB-2KGCRN
19/32-18 UNF
gases
HB-2KLCRN
19/32-18 UNF
liquids
description
Plug without
connection part.
2-KG-CRN and 2-KL-CRN plug components

pic.
596
code
description
HB-902-9-292
O-ring.
HB-2KG01CRN
Plug body with a fem. thread 19/32-18 UNF (gases).
HB-2KL01CRN
Plug body with a fem. thread 19/32-18 UNF (liquids).
HB-VA2KGLCRN Valve.

CEJN couplings
310 series DN 5,3
Material:
Socket - zinc-plated steel

Plug - hardened zinc-plated steel
Flow rate:
925 l/min (900 l/min - VS),
Pe = 6 bar (p=0,5 bar)
Working press.: 16 bar (12 bar - VS)
Bursting press.: 140 bar (48 bar - VS)
Working temp.: From -20C up to +100C (up to +80C - VS)
A single shut-off quick release coupling for general purpose application in industry, mainly in pneumatic systems. For
one hand operation with minimum coupling force. Manufactured according to ISO 6150B (MIL C-4109). Available
socket versions: STANDARD, VS (vented safety version, vented before disconnection to avoid the risk of sudden
separation, complies with ISO 4414 and EN 983 standard), SOFT-LINE (in soft housing, to protect quick release
coupling from mechanical impact), MULTI-LINK (for modular connection systems). Interchangeable with: RECTUS
23 and 24, TEMA 1400, HANSEN 3000, GROMELLE 600, PARKER 20 and 30 (1/4), JWL 521 and 531.
picture
STANDARD
VS
STANDARD
VS
STANDARD
VS
code
connection
CJ-103101002
6,3 mm
CJ-103101003
8 mm
CJ-103101004
picture
code
connection
CJ-103101240
female 1/4 BSP
CJ-103101241
female 3/8 BSP
10 mm
CJ-103101446
female 1/4 NPT
CJ-103101005
13 mm
CJ-103101447
female 3/8 NPT
CJ-103103002
6,3 mm
SOFT-LINE
CJ-103103234 (VS) female 3/8 BSP
CJ-103103003
8 mm
CJ-103105001
5 mm
CJ-103103004
10 mm
CJ-103105002
6,3 mm
CJ-103103005
13 mm
CJ-103105003
8 mm
CJ-103101152
male 1/4 BSPT
CJ-103105004
10 mm
CJ-103101154
male 3/8 BSPT
CJ-103105005
13 mm
CJ-103101155
male 1/2 BSPT
CJ-103105151
male 1/8 BSPT
CJ-103101452
male 1/4 NPT
CJ-103105152
male 1/4 BSPT
CJ-103101454
male 3/8 NPT
CJ-103105154
male 3/8 BSPT
CJ-103101455
male 1/2 NPT
CJ-103105252
male 1/4 BSP
CJ-103103152
male 1/4 BSPT
CJ-103105451
male 1/8 NPT
CJ-103103154
male 3/8 BSPT
CJ-103105452
male 1/4 NPT
CJ-103103155
male 1/2 BSPT
CJ-103105454
male 3/8 NPT
CJ-103103452
male 1/4 NPT
CJ-103105455
male 1/2 NPT
CJ-103103454
male 3/8 NPT
CJ-103105201
female 1/8 BSP
CJ-103103455
male 1/2 NPT
CJ-103105202
female 1/4 BSP
CJ-103101202
female 1/4 BSP
CJ-103105204
female 3/8 BSP
CJ-103101204
female 3/8 BSP
CJ-103105401
female 1/8 NPT
CJ-103101205
female 1/2 BSP
CJ-103105402
female 1/4 NPT
CJ-103101402
female 1/4 NPT
CJ-103105404
female 3/8 NPT
CJ-103101404
female 3/8 NPT
CJ-103101405
female 1/2 NPT
CJ-103103202
female 1/4 BSP
CJ-103103204
female 3/8 BSP
CJ-103103205
female 1/2 BSP
CJ-103103402
female 1/4 NPT
CJ-103103404
female 3/8 NPT
CJ-103103405
female 1/2 NPT
597

CEJN couplings
320 series DN 7,6
Material:
Socket - zinc-plated steel

(aluminium for AL version)
Plug - hardened zinc-plated steel
Flow rate:
2100 l/min (1900 l/min - VS),
Working press.: 16 bar (12 bar - VS)
Bursting press.: 140 bar (48 bar - VS)
A single shut-off quick release coupling for general purpose application in industry, mainly in pneumatic systems.
For one hand operation with minimum coupling force. Manufactured according to Eurostandard 7.6. Available
socket versions: STANDARD, VS (vented safety version, vented before disconnection to avoid the risk of sudden
separation, complies with ISO 4414 and EN 983 standard), SOFT-LINE (in soft housing, to protect quick release
coupling from mechanical impact), MULTI-LINK (for modular connection systems). Interchangeable with: RECTUS
25 and 26, TEMA 1600, JWL 520 and 530, other couplings complying with Eurostandard 7.2-7.6.
picture
STANDARD
VS
AL
STANDARD
VS
STANDARD
VS
598
code
connection
CJ-103201002
CJ-103201003
CJ-103201009
CJ-103201004
CJ-103201005
CJ-103203002
CJ-103203003
CJ-103203004
CJ-103203005
CJ-103201932
CJ-103201934
CJ-103201935
CJ-103201152
CJ-103201154
CJ-103201155
CJ-103201452
CJ-103201454
CJ-103201455
CJ-103203152
CJ-103203154
CJ-103203155
CJ-103203452
CJ-103203454
CJ-103203455
CJ-103201202
CJ-103201204
CJ-103201205
CJ-103201402
CJ-103201404
CJ-103201405
CJ-103203202
CJ-103203204
CJ-103203205
CJ-103203402
CJ-103203404
CJ-103203405
6,3 mm
8 mm
9 mm
10 mm
13 mm
6,3 mm
8 mm
10 mm
13 mm
6,3 mm
10 mm
13 mm
male 1/4 BSPT
male 3/8 BSPT
male 1/2 BSPT
male 1/4 NPT
male 3/8 NPT
male 1/2 NPT
male 1/4 BSPT
male 3/8 BSPT
male 1/2 BSPT
male 1/4 NPT
male 3/8 NPT
male 1/2 NPT
female 1/4 BSP
female 3/8 BSP
female 1/2 BSP
female 1/4 NPT
female 3/8 NPT
female 1/2 NPT
female 1/4 BSP
female 3/8 BSP
female 1/2 BSP
female 1/4 NPT
female 3/8 NPT
female 1/2 NPT
picture
SOFT-LINE
SOFT-LINE
AL
code
connection
CJ-103201086
10 mm
CJ-103201087
13 mm
CJ-103201246
female 1/4 BSP
CJ-103201247
female 3/8 BSP
CJ-103201942
CJ-103201972
female 1/4 BSP

female 1/4 NPT
CJ-103201974
female 3/8 NPT
CJ-103205001
CJ-103205002
CJ-103205003
CJ-103205004
CJ-103205005
CJ-103205151
CJ-103205152
CJ-103205154
CJ-103205155
CJ-103205263
CJ-103205264
CJ-103205265
CJ-103205451
CJ-103205452
CJ-103205454
CJ-103205455
CJ-103205201
CJ-103205202
CJ-103205204
CJ-103205205
CJ-103205401
CJ-103205402
CJ-103205404
CJ-103205405
5 mm
6,3 mm
8 mm
10 mm
13 mm
male 1/8 BSPT
male 1/4 BSPT
male 3/8 BSPT
male 1/2 BSPT
male 1/4 BSP
male 3/8 BSP
male 1/2 BSP
male 1/8 NPT
male 1/4 NPT
male 3/8 NPT
male 1/2 NPT
female 1/8 BSP
female 1/4 BSP
female 3/8 BSP
female 1/2 BSP
female 1/8 NPT
female 1/4 NPT
female 3/8 NPT
female 1/2 NPT

CEJN couplings
324 series DN 6,2
Flow rate:
42 l/min, Kv 1,26
Bursting press.: 140 bar
A double shut-off quick release couplings widely used in industry, mainly for fluids. Due to their small size, they
can be used in cooling systems in injection moulding. Made of nickel-plated brass. Sealing of NBR. Designed for
one hand operation with little coupling force. Dust caps are supplied as a standard.
description

Socket with male thread BSPT
Socket with female thread BSP
Plug with female thread BSP
code
connection
seal
length
[mm]
diameter
[mm]
spanner
size
[mm]
CJ-103241003
CJ-103241004
CJ-103241005
CJ-103241152
CJ-103241154
CJ-103241155
CJ-103241202
CJ-103241204
CJ-103241205
CJ-103241212
CJ-103241222
CJ-103246202
CJ-103246212
CJ-103246222
CJ-103246402
8 mm
10 mm
13 mm
1/4
3/8
1/2
1/4
3/8
1/2
1/4
1/4
1/4
1/4
1/4
1/4 NPT
NBR
NBR
NBR
NBR
NBR
NBR
NBR
NBR
NBR
Viton
EPDM
NBR
FPM
EPDM
NBR
68,3
67,3
66,3
59,3
58,3
51,8
56,3
56,3
60,3
56,7
56,7
52,1
52,1
52,1
52,1
23,4
23,4
23,4
23,4
23,4
25,4
23,4
25,4
28,9
23,4
23,4
23,1
23,1
23,1
23,1
20
20
20
20
20
22
20
22
25
20
20
20
20
20
20
599

CEJN couplings
410 series DN 10,4
Material:
Socket zinc-plated steel

Plug hardened and zinc-plated steel
Flow rate:
3900 l/min (3700 l/min - VS),
A single shut-off quick release coupling for general purpose application in industry, mainly in pneumatic systems.
For one hand operation with minimum coupling force. Manufactured according to Eurostandard 10.4. Available
socket versions: STANDARD and VS (vented safety version, vented before disconnection to avoid the risk of
sudden separation, complies with ISO 4414 and EN 983 standard). Interchangeable with: RECTUS 27 and 41,
TEMA 1700, other couplings complying with Eurostandard 10.4.
picture
code
connection
STANDARD
CJ-104101003
CJ-104101004
CJ-104101005
CJ-104101006
CJ-104101007
8 mm
10 mm
13 mm
16 mm
19 mm
VS
CJ-104103005
13 mm
CJ-104103006
16 mm
CJ-104103007
19 mm
CJ-104101154
CJ-104101155
CJ-104101157
CJ-104101454
CJ-104101455
CJ-104101457
male 3/8 BSPT

male 1/2 BSPT
male 3/4 BSPT
male 3/8 NPT
male 1/2 NPT
male 3/4 NPT
CJ-104103155
male 1/2 BSPT
CJ-104103157
male 3/4 BSPT
CJ-104101204
CJ-104101205
CJ-104101207
CJ-104101404
CJ-104101405
CJ-104101407
female 3/8 BSP

female 1/2 BSP
female 3/4 BSP
female 3/8 NPT
female 1/2 NPT
female 3/4 NPT
STANDARD
VS
STANDARD
VS
CJ-104103204
CJ-104103205
600
female 3/8 BSP
female 1/2 BSP
picture
code
connection
CJ-104105002
CJ-104105003
CJ-104105004
CJ-104105005
CJ-104105006
CJ-104105007
CJ-104105152
CJ-104105154
CJ-104105155
CJ-104105157
CJ-104105454
CJ-104105455
CJ-104105457
CJ-104105202
CJ-104105204
CJ-104105205
CJ-104105207
CJ-104105404
CJ-104105405
CJ-104105407
6,3 mm
8 mm
10 mm
13 mm
16 mm
19 mm
male 1/4 BSPT
male 3/8 BSPT
male 1/2 BSPT
male 3/4 BSPT
male 3/8 NPT
male 1/2 NPT
male 3/4 NPT
female 1/4 BSP
female 3/8 BSP
female 1/2 BSP
female 3/4 BSP
female 3/8 NPT
female 1/2 NPT
female 3/4 NPT

CEJN couplings
Multi-Link
Material:
Seal:
Working press.:
Working temp.:
Nickel-plated brass
NBR
10 bar
The Multi-Link system allows to connect several units using quick release couplings. Particularly recommended
for applications where supplying several media under different pressure is required and the assembly space is
limited or not easily accessible. Several media can be supplied simultaneously or selectively using of a shut-off
valve in the Multi-Link system. The advantage of the Multi-Link system is quick and easy assembly of modules that
can be positioned under different angles. These properties help to minimize the risk of hose kinking and ensure
uninterrupted flow. The modules are offered with several standards e.g. ISO 6150B, Eurostandard 7.6. The MultiLink system is compatible with CEJN 310 and 320 quick release couplings. The modules are available with female
thread connection. Sockets of particular modules are in VS version as well (vented safety version, vented before
disconnection).
Multi-Link system assembly
Connection of modules (maximum 6 units) is achieved by inserting two modules reversed by 180 against each
other and then aligning them back. A complete assembly of modules should be firmly bolted down (inlet and outlet
module).
picture
code
CJ-199021070
CJ-199022070
CJ-199022075
CJ-199021071
CJ-199022071
CJ-199022076
CJ-199021080
CJ-199022080
CJ-199022085
CJ-199021081
CJ-199022081
CJ-199022086
CJ-199021025
CJ-199021045
CJ-199022025
CJ-199022045
CJ-199020025
CJ-199020045
CJ-199023000
CJ-199004335
CJ-199004345
description
Centre module for quick release couplings 310 series.
Outlet module for quick release couplings 310 series.
Centre module with safety valve (VS) for couplings 310 series.
Outlet module with safety valve (VS) for couplings 310 series.
Centre module for quick release couplings 320 series.
Centre module with safety valve (VS) for couplings 320 series.
Centre module with 1/2 BSP female thread.
Centre module with 1/2 NPT female thread.
Outlet module with 1/2 BSP female thread.
Outlet module with 1/2 NPT female thread.
Inlet module.
Inlet module.
Stop valve.
Plug with O-ring
Plug with O-ring
thread
pic.
1/2 BSP
1/2 NPT
1/2 BSP
1/2 NPT
1/2 BSP
1/2 NPT
1/2 BSP
1/2 NPT
1/2 BSP
1/2 NPT
1/2 BSP
1/2 NPT
1/2 BSP
1/2 NPT
1
2
2
3
4
4
1
2
2
3
4
4
5
5
6
6
7
7
8
9
9
601

NITTO KOHKI couplings
HI CUPLA
Flow rate:
4000 l/min (1), 3200 l/min (3/4),

2600 l/min (1/2), 1600 l/min (3/8),
1000 m3/min (1/4) - at 5 bar
Working press.: 10 bar (brass), 15 bar (steel AISI 303)
Working temp.: NBR: from -20C up to +80C (standard)
Viton: from -20C up to +180C (option)
General purpose single shut-off quick release couplings, highly durable and resistant to vibrations. Designed to
connect pneumatic tools to air installation (made of chromium-plated carbon steel) or water installations (made of
brass, stainless steel). Standard sealing made of NBR, Viton as an option.
Attention! medium must always flow from socket to plug.
Plug with hose tail
Socket with BSPT male thread
602
code
(brass)
code
(carbon steel)
code
(AISI 303)
hose
DN
[inch]
Ls
[mm]
D
[mm]
A
[mm]
Bs
[mm]
NK-20SH-B
NK-20SH-S
NK-20SH-SS
1/4
72,5
26,5
30
NK-30SH-B
NK-30SH-S
NK-30SH-SS
3/8
76,5
26,5
34
7,5
NK-40SH-B
NK-40SH-S
NK-40SH-SS
1/2
78,5
26,5
36
NK-400SH-B
NK-400SH-S
NK-400SH-SS
1/2
83
35
36
NK-600SH-B
NK-600SH-S
NK-600SH-SS
3/4
92
35
45
14
NK-800SH-B
NK-800SH-S
NK-800SH-SS
102
35
55
16
code
(brass)
code
(carbon steel)
code
(AISI 303)
hose
DN
[inch]
Lp
[mm]
A
[mm]
Bp
[mm]
Bd
[mm]
NK-20PH-B
NK-20PH-S
NK-20PH-SS
1/4
57
30
7,5
NK-30PH-B
NK-30PH-S
NK-30PH-SS
3/8
61
34
7,5
7,5
NK-40PH-B
NK-40PH-S
NK-40PH-SS
1/2
63
36
7,5
7,5
NK-400PH-B
NK-400PH-S
NK-400PH-SS
1/2
66
36
13
NK-600PH-B
NK-600PH-S
NK-600PH-SS
3/4
77
45
13
13
NK-800PH-B
NK-800PH-S
NK-800PH-SS
85
54
20
13
code
(brass)
code
(carbon steel)
code
(AISI 303)
thread
size
[inch]
Ls
[mm]
D
[mm]
A
[mm]
Bs
[mm]
NK-20SM-B
NK-20SM-S
NK-20SM-SS
1/4
55,5
26,5
13
NK-30SM-B
NK-30SM-S
NK-30SM-SS
3/8
56,5
26,5
14
NK-40SM-B
NK-40SM-S
NK-40SM-SS
1/2
59,5
26,5
16
NK-400SM-B
NK-400SM-S
NK-400SM-SS
1/2
63
35
16
13
NK-600SM-B
NK-600SM-S
NK-600SM-SS
3/4
67
35
19
16
NK-800SM-B
NK-800SM-S
NK-800SM-SS
72
35
22
16

Plug with BSPT male thread
Socket with BSPT female thread
Plug with BSPT female
code
(brass)
code
(carbon steel)
code
(AISI 303)
thread
size
[inch]
Lp
[mm]
A
[mm]
Bp
[mm]
Bd
[mm]
NK-20PM-B
NK-20PM-S
NK-20PM-SS
1/4
41
13
7,5
7,5
NK-30PM-B
NK-30PM-S
NK-30PM-SS
3/8
42
14
7,5
7,5
NK-40PM-B
NK-40PM-S
NK-40PM-SS
1/2
46
16
12
7,5
NK-400PM-B
NK-400PM-S
NK-400PM-SS
1/2
50
16
13
13
NK-600PM-B
NK-600PM-S
NK-600PM-SS
3/4
55
18
19
13
NK-800PM-B
NK-800PM-S
NK-800PM-SS
63
22
22
13
code
(brass)
code
(carbon steel)
code
(AISI 303)
thread
size
[inch]
Ls
[mm]
A
[mm]
D
[mm]
NK-20SF-B
NK-20SF-S
NK-20SF-SS
1/4
49,5
13
26,5
NK-30SF-B
NK-30SF-S
NK-30SF-SS
3/8
50,5
14
26,5
NK-40SF-B
NK-40SF-S
NK-40SF-SS
1/2
52,5
15
26,5
NK-400SF-B
NK-400SF-S
NK-400SF-SS
1/2
57
15
35
NK-600SF-B
NK-600SF-S
NK-600SF-SS
3/4
61
17
35
NK-800SF-B
NK-800SF-S
NK-800SF-SS
68
22
35
code
(brass)
code
(carbon steel)
code
(AISI 303)
thread
size
[inch]
Lp
[mm]
A
[mm]
C
[mm]
Bd
[mm]
NK-20PF-B
NK-20PF-S
NK-20PF-SS
1/4
36
13
20
7,5
NK-30PF-B
NK-30PF-S
NK-30PF-SS
3/8
37
14
20
7,5
NK-40PF-B
NK-40PF-S
NK-40PF-SS
1/2
38
15
20
7,5
NK-400PF-B
NK-400PF-S
NK-400PF-SS
1/2
41
15
23
13
NK-600PF-B
NK-600PF-S
NK-600PF-SS
3/4
45
17
23
13
NK-800PF-B
NK-800PF-S
NK-800PF-SS
54
22
23
13
HI CUPLA - divider system

NK-200L
connection
code
inlet
(plug)
outlet
(socket)
NK-200L
1/2
1 x 1/2
4 x 1/4
NK-200S
1/2
1 x 1/2
4 x 1/4
NK-200S
description
HI CUPLA divider system (version of

chromium-plated steel with caps).
Body material: aluminium.
Seal: NBR.
Working press: 15 bar.
Working temp.: from -5C up to +60C
603

SP CUPLA type A
Working press.: Brass

50 bar (1/8, 1/4,3/8)

30 bar (1/2, 3/4, 1)

20 bar (1.1/4, 1.1/2)

15 bar (2)
Carbon steel, AISI 303

75 bar (1/8, 1/4,3/8)

45 bar (1/2, 3/4, 1)

30 bar (1.1/4, 1.1/2)

20 bar (2)
EPDM: from -40C up to +150C (option)
A general purpose double shut-off quick release coupling which features excellent durability. It is used for water,
hydraulic oil, steam, chemicals, air and gases. Material: brass, chromium-plated carbon steel, stainless steel. It is
also available with BSP female thread from 1/4 to 1.
Plug with BSPT female thread
604
code
(brass)
code
(carbon steel)
code
(AISI 303)
thread
size
[inch]
Ls
[mm]
D
[mm]
Hs
[mm]
NK-1S-A-B
NK-1S-A-SS
1/8
48
24
14
NK-2S-A-B
NK-2S-A-S
NK-2S-A-SS
1/4
58
28
19
NK-3S-A-B
NK-3S-A-S
NK-3S-A-SS
3/8
65
35
21
NK-4S-A-B
NK-4S-A-S
NK-4S-A-SS
1/2
72
45
29
NK-6S-A-B
NK-6S-A-S
NK-6S-A-SS
3/4
88
55
35
NK-8S-A-B
NK-8S-A-S
NK-8S-A-SS
102
65
41
NK-10S-A-B
NK-10S-A-S
NK-10S-A-SS
1.1/4
115
77
54
NK-12S-A-B
NK-12S-A-S
NK-12S-A-SS
1.1/2
124
88
63
NK-16S-A-B
NK-16S-A-S
NK-16S-A-SS
132
108
77
code
(brass)
code
(carbon steel)
code
(AISI 303)
thread
size
[inch]
Lp
[mm]
C
[mm]
Hp
[mm]
NK-1P-A-B
NK-1P-A-SS
1/8
29
19
14
NK-2P-A-B
NK-2P-A-S
NK-2P-A-SS
1/4
36
22
17
NK-3P-A-B
NK-3P-A-S
NK-3P-A-SS
3/8
40
25
21
NK-4P-A-B
NK-4P-A-S
NK-4P-A-SS
1/2
44
28
29
NK-6P-A-B
NK-6P-A-S
NK-6P-A-SS
3/4
52
36
35
NK-8P-A-B
NK-8P-A-S
NK-8P-A-SS
62
40
41
NK-10P-A-B
NK-10P-A-S
NK-10P-A-SS
1.1/4
70
45
54
NK-12P-A-B
NK-12P-A-S
NK-12P-A-SS
1.1/2
75
49
63
NK-16P-A-B
NK-16P-A-S
NK-16P-A-SS
80
52
77

TSP CUPLA
Working press.: Brass

50 bar (1/8, 1/4,3/8)

30 bar (1/2, 3/4, 1)

20 bar (1.1/4, 1.1/2)

15 bar (2)
Carbon steel, AISI 303

75 bar (1/8, 1/4,3/8)

45 bar (1/2, 3/4, 1)

30 bar (1.1/4, 1.1/2)

20 bar (2)
EPDM: from -40C up to +150C (option)
A general purpose full flow quick release couplings which feature excellent durability. It is used for water, hydraulic
oils, steam, chemicals, air and gases. Material: brass, nickel-plated carbon steel, stainless steel. Especially
recommended for high viscosity fluids, e.g. lubricants. It is also available with BSP female thread from 1/4 to 1.
Plug with hose tail
code
(brass)
code
(carbon steel)
code
(AISI 303)
hose
DN
[inch]
Ls
[mm]
D
[mm]
A
[mm]
Bs
[mm]
NK-1TSH-B
NK-1TSH-SS
1/8
40
17,5
20
NK-2TSH-B
NK-2TSH-S
NK-2TSH-SS
1/4
55
24
29
NK-3TSH-B
NK-3TSH-S
NK-3TSH-SS
3/8
62
28
32
NK-4TSH-B
NK-4TSH-S
NK-4TSH-SS
1/2
74
35
39
10
NK-6TSH-B
NK-6TSH-S
NK-6TSH-SS
3/4
90
45
48
15
NK-8TSH-B
NK-8TSH-S
NK-8TSH-SS
102
58
57
19
NK-10TSH-B
NK-10TSH-S
NK-10TSH-SS
1.1/4
117
69
70
26
NK-12TSH-B
NK-12TSH-S
NK-12TSH-SS
1.1/2
128
75
75
32
NK-16TSH-B
NK-16TSH-S
NK-16TSH-SS
141
98
80
40
code
(brass)
code
(carbon steel)
code
(AISI 303)
hose
DN
[inch]
Lp
[mm]
C
[mm]
A
[mm]
Bp
[mm]
NK-1TPH-B
NK-1TPH-SS
1/8
41
15,5
20
NK-2TPH-B
NK-2TPH-S
NK-2TPH-SS
1/4
53
18
29
NK-3TPH-B
NK-3TPH-S
NK-3TPH-SS
3/8
60
21
32
NK-4TPH-B
NK-4TPH-S
NK-4TPH-SS
1/2
70
24
39
10
NK-6TPH-B
NK-6TPH-S
NK-6TPH-SS
3/4
84
28
48
15
NK-8TPH-B
NK-8TPH-S
NK-8TPH-SS
105
36
57
19
NK-10TPH-B
NK-10TPH-S
NK-10TPH-SS
1.1/4
121
39
70
26
NK-12TPH-B
NK-12TPH-S
NK-12TPH-SS
1.1/2
132
45
75
32
NK-16TPH-B
NK-16TPH-S
NK-16TPH-SS
142
51
80
40
605

Socket with BSPT male thread
Plug with BSPT male thread
Plug with BSPT female thread
606
code
(carbon steel)
code
(AISI 303)
thread
size
[inch]
Ls
[mm]
D
[mm]
NK-1TSM-B
NK-1TSM-SS
1/8
30
NK-2TSM-B
NK-2TSM-S
NK-2TSM-SS
1/4
42
NK-3TSM-B
NK-3TSM-S
NK-3TSM-SS
3/8
NK-4TSM-B
NK-4TSM-S
NK-4TSM-SS
NK-6TSM-B
NK-6TSM-S
NK-6TSM-SS
code
(brass)
A
[mm]
Bs
[mm]
17,5
4,5
24
13
6,5
46
28
13
10
1/2
56
35
17
13
3/4
65
45
19
18
NK-8TSM-B
NK-8TSM-S
NK-8TSM-SS
76
58
22
24
NK-10TSM-B
NK-10TSM-S
NK-10TSM-SS
1.1/4
86
69
25
32
NK-12TSM-B
NK-12TSM-S
NK-12TSM-SS
1.1/2
95
75
25
38
NK-16TSM-B
NK-16TSM-S
NK-16TSM-SS
108
98
29
49
code
(brass)
code
(carbon steel)
code
(AISI 303)
thread
size
[inch]
Lp
[mm]
C
[mm]
A
[mm]
Bp
[mm]
NK-1TPM-B
NK-1TPM-SS
1/8
32
15,5
4,5
NK-2TPM-B
NK-2TPM-S
NK-2TPM-SS
1/4
38
18
13
6,5
NK-3TPM-B
NK-3TPM-S
NK-3TPM-SS
3/8
43
21
13
10
NK-4TPM-B
NK-4TPM-S
NK-4TPM-SS
1/2
52
24
17
13
NK-6TPM-B
NK-6TPM-S
NK-6TPM-SS
3/4
59
28
19
17
NK-8TPM-B
NK-8TPM-S
NK-8TPM-SS
73
36
22
25
NK-10TPM-B
NK-10TPM-S
NK-10TPM-SS
1.1/4
83
39
23
32
NK-12TPM-B
NK-12TPM-S
NK-12TPM-SS
1.1/2
93
45
26
38
NK-16TPM-B
NK-16TPM-S
NK-16TPM-SS
102
51
27
50
code
(brass)
code
(carbon steel)
code
(AISI 303)
thread
size
[inch]
Ls
[mm]
D
[mm]
NK-1TSF-B
NK-1TSF-SS
1/8
27
17,5
NK-2TSF-B
NK-2TSF-S
NK-2TSF-SS
1/4
32
24
13
NK-3TSF-B
NK-3TSF-S
NK-3TSF-SS
3/8
35
28
13
NK-4TSF-B
NK-4TSF-S
NK-4TSF-SS
1/2
42
35
17
NK-6TSF-B
NK-6TSF-S
NK-6TSF-SS
3/4
48
45
19
A
[mm]
NK-8TSF-B
NK-8TSF-S
NK-8TSF-SS
59
58
22
NK-10TSF-B
NK-10TSF-S
NK-10TSF-SS
1.1/4
64
69
23
NK-12TSF-B
NK-12TSF-S
NK-12TSF-SS
1.1/2
71
75
23
NK-16TSF-B
NK-16TSF-S
NK-16TSF-SS
80
98
27
code
(brass)
code
(carbon steel)
code
(AISI 303)
thread
size
[inch]
Lp
[mm]
C
[mm]
NK-1TPF-B
NK-1TPF-SS
1/8
26
NK-2TPF-B
NK-2TPF-S
NK-2TPF-SS
1/4
34
NK-3TPF-B
NK-3TPF-S
NK-3TPF-SS
3/8
NK-4TPF-B
NK-4TPF-S
NK-4TPF-SS
1/2
NK-6TPF-B
NK-6TPF-S
NK-6TPF-SS
NK-8TPF-B
NK-8TPF-S
NK-10TPF-B
A
[mm]
Bp
[mm]
15,5
4,5
18
13
6,5
38
21
13
10
45
24
17
13
3/4
51
28
19
17
NK-8TPF-SS
60
36
22
26
NK-10TPF-S
NK-10TPF-SS
1.1/4
64
39
25
32
NK-12TPF-B
NK-12TPF-S
NK-12TPF-SS
1.1/2
75
45
25
38
NK-16TPF-B
NK-16TPF-S
NK-16TPF-SS
83
51
29
50

PCV PIPE CUPLA
Material:
Seal:
Working press.:
Working temp.:
Brass
CR, Viton or HNBR
46 bar (vacuum down to 0.13 Pa)
From -20C up to +80C (CR)
From -20C up to +180C (Viton)
From -20C up to +80C (HNBR)
Push-in quick release couplings are designed to connect straight copper pipes with other parts of installation. Once
a pipe is inserted into the coupling and clamped with the lever, a firm and tight double seal is created. A specified
position works as a dust cap. Used with gaseous media (air, nitrogen, cooling agents - R12, R22, R134a freons
with compression oil). Sealing must be selected according to the medium. Application: tank tightness pressure
tests, emptying and filling of air conditioning systems, refrigerators, etc. The couplings are manufactured in Japan.
pipe O.D.
male thread
code
1/2
(12,7 mm)
5/8
(15,88 mm)
1/4" BSPT
3/8 BSPT
1/4" BSPT
3/8 BSPT
cap
1/4" BSPT
3/8 BSPT
1/4" BSPT
3/8 BSPT
cap
1/4" BSPT
3/8 BSPT
cap
1/4" BSPT
3/8 BSPT
cap
1/4" BSPT
3/8 BSPT
cap
1/4" BSPT
3/8 BSPT
3/8 BSPT
cap
3/8 BSPT
cap
NK-PCV400-2
NK-PCV400-3
NK-PCV470-2
NK-PCV470-3
NK-PCV470-0
NK-PCV500-2
NK-PCV500-3
NK-PCV600-2
NK-PCV600-3
NK-PCV600-0
NK-PCV630-2
NK-PCV630-3
NK-PCV630-0
NK-PCV800-2
NK-PCV800-3
NK-PCV800-0
NK-PCV950-2
NK-PCV950-3
NK-PCV950-0
NK-PCV1000-2
NK-PCV1000-3
NK-PCV1270-3
NK-PCV1270-0
NK-PCV1590-3
NK-PCV1590-0
min. pipe length L

[mm]
min. wall thickness diameter

[mm]
coupling type
4 mm
3/16
(4,76 mm)
5 mm
6 mm
1/4
(6,35 mm)
8 mm
3/8
(9,52 mm)
10 mm
19
0,8
20,5
30
PCV400
PCV470
PCV500
PCV600
PCV630
PCV800
PCV950
PCV1000
PCV1270
PCV1590
607

GROMELLE couplings - SAFELINE series
ISO 6150B type DN 5,5, DN 8
Flow rate:
DN 5,5 - 700 l/min., DN 8 - 1590 l/min. at

entrance pressure Pe = 6 bar (p = 0,6 bar)
Material:
The body of a socket - duralumin, connection - nickel-plated brass, push button - hardened
steel, valve - zinc-plated steel, plug - zinc-plated steel, sealing - NBR.
Description:
Compact and lightweight single shut-off coupling for air transfer. Equipped with button locking
system, ensuring safe disconnection of a hose.
Interchangeable: All couplings with the design of a plug compliant with ISO 6150B and MIL C 4109 (DN 5.5, DN 8).
code
608
full flow
DN
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
GR-GD1053615
5,5
1/4 BSP
19
64
26
12
GR-GD1053614
5,5
1/4 BSPT
17
66
26
13
GR-GD1053639
5,5
3/8 BSP
22
65
26
12
GR-GD1053638
5,5
3/8 BSPT
17
66
26
15
GR-GD1053613
5,5
1/2 BSP
27
67
26
14
GR-GD1053612
5,5
1/2 BSPT
22
65
26
17
GR-ID1096015
1/4 BSP
22
76
34
12
GR-ID1096014
1/4 BSPT
22
76
34
13
GR-ID1096039
3/8 BSP
22
76
34
12
GR-ID1096038
3/8 BSPT
22
76
34
15
GR-ID1096013
1/2 BSP
27
76
34
14
GR-ID1096012
1/2 BSPT
22
76
34
17
code
full flow
DN
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
GR-GD1052614
5,5
1/4 BSP
17
76
26
GR-GD1052638
5,5
3/8 BSP
22
81
26
GR-GD1052612
5,5
1/2 BSP
27
83
26
GR-ID1097014
1/4 BSP
22
88
34
GR-ID1097038
3/8 BSP
22
91
34
GR-ID1097012
1/2 BSP
27
94
34
code
full flow
DN
hose
I.D.
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
GR-GD1055667
5,5
6 mm
17
65
26
28
GR-GD1055678
5,5
7 mm
17
65
26
28
GR-GD1055689
5,5
8 mm
17
65
26
28
GR-GD1055690
5,5
9 mm
17
65
26
28
GR-GD1055601
5,5
10 mm
17
65
26
28
GR-ID1095678
7 mm
22
77
34
28
GR-ID1095689
8 mm
22
77
34
28
GR-ID1095690
9 mm
22
77
34
28
GR-ID1095601
10 mm
22
77
34
28

GROMELLE couplings - SAFELINE series
code
full flow
DN
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
GR-GA0066318
5,5
1/8 BSPT
12
32
GR-GA0066314
5,5
1/4 BSPT
14
32
13
GR-GA0066338
5,5
3/8 BSPT
17
32
15
GR-IA0090614
1/4 BSPT
16
34
13
GR-IA0090638
3/8 BSPT
17
36
15
GR-IA0090612
1/2 BSPT
23
40
17
code
full flow
DN
thread
size
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
GR-GA0066214
5,5
1/4 BSP
17
44
GR-GA0066238
5,5
3/8 BSP
21
44
GR-IA0090714
1/4 BSP
17
50
GR-IA0090738
3/8 BSP
21
50
GR-IA0090712
1/2 BSP
26
53
full flow
DN
5,5
5,5
5,5
5,5
5,5
8
8
8
8
8
hose
I.D.
6 mm
7 mm
8 mm
9 mm
10 mm
7 mm
8 mm
9 mm
10 mm
11-12 mm
SW
[mm]
-
L
[mm]
28
28
28
28
28
33
33
33
33
33
D
[mm]
14
14
14
14
14
16
16
16
16
16
L1
[mm]
26
26
26
26
26
26
26
26
26
31
code
full flow
DN
hose
I.D. x O.D.
SW
[mm]
L
[mm]
D
[mm]
L1
[mm]
GR-GA0066174
5,5
7x14 mm
16/19
56,5
GR-GA0066184
5,5
8x14 mm
16/19
56,5
GR-GA0066185
5,5
8x15 mm
16/19
56,5
GR-GA0066196
5,5
9x16 mm
16/19
56,5
code
GR-GA0066767
GR-GA0066778
GR-GA0066789
GR-GA0066790
GR-GA0066701
GR-IA0090978
GR-IA0090989
GR-IA0090990
GR-IA0090901
GR-IA0090912
SAFELINE couplings are manufactured in compliance with ISO 4414 standard. A button locking system protects
against accidental disconnection of a coupling and its effects, e.g. a hose pushed by the power of compressed air
can hit its operator. The coupling is made of duralumin so it is very lightweight.
Manufactured to match three plug designs: ISO 6150B (DN 5.5 i DN 8), ISO 6150C (DN 5.5, DN 8 and DN 11)
and ARO 210 (DN 5.5).
To disconnect a coupling:
- push the button, which will cause closing of
the valve and venting of remnant air
- axial pressing of a plug releases it from the
socket and enables disconnection of the
coupling.
609

GROMELLE couplings
MLDB (1/4 1)
Standard:
Applications:
Manufacturers standard
Industrial (water, steam, fuel and oil,
gas, chemicals)
Working press.: Up to 25 bar (safety factor 4:1)
Special stainless steel AISI 316L
Material:
Viton (from -20C up to +200C) - standard
Seal:
EPDM (from -40C up to +150C) - standard
Kalrez (from -20C up to +327C) - option
Advantages:
Dry brake, made of the highest quality steel
Dry brake quick release couplings of a flat face type made of the highest purity steel (VIM-VAR vacuum casting).
They feature very low air inclusion. Used mainly in industrial applications where cleanliness is crucial (nuclear,
food, pharmaceutical industry, semiconductors manufacturing, perfumes). One hand operation. A safety ferrule
lock prevents accidental disconnection. Easy service - the design allows easy cleaning and replacement of seals.
size
[inch]
Socket
female thread
[inch]
1/4" BSP
1/4" NPT
1/2" BSP
1/2" NPT
3/4 BSP
3/4 NPT
1 BSP
1 NPT
1/4"
1/2"
3/4"
1
size
[inch]
Plug
female thread
[inch]
1/4" BSP
1/4" NPT
1/2" BSP
1/2" NPT
3/4 BSP
3/4 NPT
1 BSP
1 NPT
1/4"
1/2"
3/4"
1
code
sockets (Viton seal)
GR-ML2DB-S25FBS-V
GR- ML2DB-S25F-V
GR- ML4DB-S50FBS-V
GR- ML4DB-S50F-V
GR- ML6DB-S75FBS-V
GR- ML6DB-S75F-V
GR- ML8DB-S100FBS-V
GR- ML8DB-S100F-V
sockets (EPDM seal)

GR- ML2DB-S25FBS-E
GR- ML2DB-S25F-E
GR- ML4DB-S50FBS-E
GR- ML4DB-S50F-E
GR- ML6DB-S75FBS-E
GR- ML6DB-S75F-E
GR- ML8DB-S100FBS-E
GR- ML8DB-S100F-E
code
plug (Viton seal)
GR- ML2DB-P25FBS
GR- ML2DB-P25F
GR- ML4DB-P50FBS
GR- ML4DB-P50F
GR- ML6DB-P75FBS
GR- ML6DB-P75F
GR- ML8DB-P100FBS
GR- ML8DB-P100F
plug (EPDM seal)

GR- ML2DB-P25FBS-E
GR- ML2DB-P25F-E
GR- ML4DB-P50FBS-E
GR- ML4DB-P50F-E
GR- ML6DB-P75FBS-E
GR- ML6DB-P75F-E
GR- ML8DB-P100FBS-E
GR- ML8DB-P100F-E
Sealings sets
size
[inch]
1/4"
1/2"
3/4"
1
code of socket seal

Viton
GR-ML2DB-SG-V
GR-ML4DB-SG-V
GR-ML6DB-SG-V
GR-ML8DB-SG-V
EPDM
GR-ML2DB-SG-E
GR-ML4DB-SG-E
GR-ML6DB-SG-E
GR-ML8DB-SG-E
code of plug seal

Viton
GR-ML2DB-PG-V
GR-ML4DB-PG-V
GR-ML6DB-PG-V
GR-ML8DB-PG-V
EPDM
GR-ML2DB-PG-E
GR-ML4DB-PG-E
GR-ML6DB-PG-E
GR-ML8DB-PG-E
Working parameters
610
size
[inch]
working pressure
[bar]
flow at p = 3 bar
[l/min]
1/4"
1/2"
3/4"
1
25
25
25
25
27
140
218
393

CPC - plastic couplings
CPC quick release plastic couplings are designed for general industry, biopharmaceutical, medical, chemical, food
and packaging application. A version with an automatic shut-off valve prevents leaks and thus increases safety of
its operator. A wide choice of materials enables selection of the quick release coupling for almost any application.
One hand operation with an audible click confirming secure connection. A variety of coupling versions allows
attachment to threaded connection, in-line, hose systems, panel mounting, etc. A product line of CPC couplings
makes a total of over 4000 items. They are available as individual male or female parts with different connections
or as ready-to-use sets to be fit into a hose (so called Line-In).
It is recommended to use CPC quick release couplings with hoses listed in TYGON HOSES section.
SMC series DN 1,2

Material:
Acetal (O-ring NBR)

Polypropylene (O-ring EPDM)
Polycarbonate (O-ring NBR)
Working press.: Up to 6,9 bar
Working temp.: From -40C up to +82C (acetal)
From 0C up to +82C (polypropylene)
From -40C up to +121C (polycarbonate)
Miniature couplings are designed for ink printing installations, blood, coolants, gas chromatography, etc. It is enough
to twist two parts of the coupling against each other to connect them. In addition the coupling allows some rotation
of the hose when connected. This feature prevents kinking and accidental disconnection. The couplings made of
acetal are available in black colour as an option.
picture
acetal
code
polypropylene
polycarbonate
with 1/8 NPT male thread
CC-SMX-01-AC
CC-SMX-01-PP
for 1/16 hose
CC-SMX-02-AC
CC-SMX-02-PP
CC-SMX-02-PC
for 1/8 hose
CC-SMX-03-AC
CC-SMX-03-PP
CC-SMX-03-PC
panel mount for 1/16 hose
CC-SMX-04-AC
CC-SMX-04-PP
CC-SMX-05-AC
CC-SMX-05-PP
for 1/16 hose
CC-SMX-06-AC
CC-SMX-06-PP
CC-SMX-06-PC
for 1/8 hose
CC-SMX-07-AC
CC-SMX-07-PP
CC-SMX-07-PC
CC-SMX-08-AC
CC-SMX-08-PP
CC-SMX-09-AC
CC-SMX-09-PP
in-line set 1/16
CC-SMX-10-AC
CC-SMX-10-PP
CC-SMX-10-PC
in-line set 1/8
CC-SMX-11-AC
CC-SMX-11-PP
CC-SMX-11-PC
description
1
socket
2
3
3
4
4
plug
5
5
6
NOTE!
The codes given above apply to versions without valves. Couplings made of acetal only available with the valves. A code example of the
version with the valve e.g. CC-PMV-10-AC.
611

PMC series DN 3,2
Material:
Acetal (O-ring NBR)

Small quick release couplings designed for gas detection, medical devices, chemical analysers, ink printing,
components of optical equipment, etc. Their specific design (there are no locking balls or ferrules) allows easier
and firmer one hand connection and disconnection. An audible click confirms secure connection. Also available
with BSPT male thread.
picture
description
1
socket
6
6
7
1
2
5
6
7
plug

panel mount for 4x2 hose + nut
panel mount for 4x2.5 hose + nut
panel mount for 6.3x4.3 hose + nut
panel mount with 10-32 UNF female thread
hose tail for 4x2 hose (+ nut)
hose tail for 4x2.5 hose (+ nut)
hose tail for 6.3x4.3 hose (+ nut)
for 1/16 hose tail
for 1/8 hose tail
for 3/16 hose tail
for 1/4 hose tail
with 10-32 UNF female thread
panel mount 1/4 hose
hose tail for 4x2.5 hose (+ nut)
for 1/16 hose
for 1/8 hose
for 3/16 hose
for 1/4 hose
with 10-32 UNF female thread
90 elbow for 4x2.5 hose (+ nut)
90 elbow for 6.3x4.3 hose (+ nut)
90 elbow for 1/8 hose
NOTE!
The codes given above apply to versions with valves.
A code example of the version without the valve e.g.: CC-PMX-10-AC * - always valved
** - always non-valved
612
acetal
CC-PMV-01-AC
CC-PMV-02-AC
CC-PMV-03-AC
CC-PMV-04-AC
CC-PMV-05-AC
CC-PMV-06-AC
CC-PMV-07-AC
CC-PMV-08-AC
CC-PMV-09-AC
CC-PMV-10-AC
CC-PMV-11-AC
CC-PMV-12-AC
CC-PMV-13-AC
CC-PMV-14-AC
CC-PMV-15-AC
CC-PMV-16-AC
CC-PMV-17-AC
CC-PMV-18-AC
CC-PMV-19-AC
CC-PMV-20-AC
CC-PMV-21-AC
CC-PMV-22-AC
CC-PMV-23-AC
CC-PMV-24-AC
CC-PMV-25-AC
CC-PMV-26-AC
CC-PMV-27-AC
CC-PMV-28-AC
CC-PMV-29-AC
CC-PMV-30-AC
CC-PMV-31-AC
CC-PMV-32-AC
CC-PMV-33-AC
CC-PMV-34-AC
CC-PMV-35-AC
- **
CC-PMV-37-AC
CC-PMV-38-AC
CC-PMV-39-AC
code
polypropylene
CC-PMV-01-PP
CC-PMV-02-PP *
CC-PMV-05-PP
CC-PMV-06-PP
CC-PMV-07-PP
CC-PMV-09-PP
CC-PMV-14-PP
CC-PMV-15-PP
CC-PMV-16-PP
CC-PMV-18-PP
CC-PMV-20-PP
CC-PMV-29-PP
CC-PMV-31-PP
CC-PMV-32-PP
CC-PMV-34-PP
CC-PMV-37-PP *
CC-PMV-38-PP
CC-PMV-39-PP

PLC series DN 6,3
Material:
Acetal (O-ring NBR)

Middle size quick release couplings designed for washing systems, deionized water filtration, food fluids, industrial
machines, leak detection, medical devices, etc. Their specific design (there are no locking balls or ferrules) allows
easier and firmer one hand connection and disconnection. An audible click confirms secure connection. Also
available with BSPT male thread.
picture
description
1
socket
6
6
8
1
3
4
7
8
9
10
10
plug

push-in panel mount for 1/4 hose
with 1/4 hose tail
with 5/16 hose tail
with 3/8 hose tail
push-in for 1/4 hose (O.D.)
for 9.5x6.3 hose (+ plastic nut)
push-in panel mount for 1/4 hose
for 1/4 hose tail
for 5/16 hose tail
for 3/8 hose tail
90 elbow for 9.5x6.3 hose (+ nut)
acetal
CC-PLV-01-AC
CC-PLV-02-AC
CC-PLV-03-AC
CC-PLV-04-AC
CC-PLV-05-AC
CC-PLV-06-AC
CC-PLV-07-AC
CC-PLV-08-AC
CC-PLV-09-AC
CC-PLV-10-AC
CC-PLV-11-AC
CC-PLV-12-AC
CC-PLV-13-AC
CC-PLV-14-AC
CC-PLV-15-AC
CC-PLV-16-AC
CC-PLV-17-AC
CC-PLV-18-AC
CC-PLV-19-AC
CC-PLV-22-AC
CC-PLV-23-AC
CC-PLV-24-AC
CC-PLV-25-AC
CC-PLV-26-AC
CC-PLV-27-AC
CC-PLV-28-AC
CC-PLV-29-AC
CC-PLV-30-AC
CC-PLV-31-AC
CC-PLV-32-AC
CC-PLV-33-AC
CC-PLV-34-AC
CC-PLV-35-AC
CC-PLV-36-AC
CC-PLV-37-AC
CC-PLV-38-AC
CC-PLV-39-AC
CC-PLV-40-AC
CC-PLV-41-AC
CC-PLV-42-AC
CC-PLV-43-AC
-
code
polypropylene
CC-PLV-01-PP
CC-PLV-02-PP *
CC-PLV-05-PP
CC-PLV-07-PP
CC-PLV-09-PP
CC-PLV-13-PP
CC-PLV-15-PP
CC-PLV-17-PP
CC-PLV-20-PP *
CC-PLV-21-PP *
CC-PLV-22-PP
CC-PLV-28-PP
CC-PLV-30-PP
CC-PLV-34-PP
CC-PLV-36-PP
CC-PLV-38-PP
CC-PLV-41-PP
CC-PLV-42-PP
CC-PLV-43-PP
CC-PLV-44-PP *
CC-PLV-45-PP *
Note!
The codes given above apply to versions with valves. A code example of the version without the valve e.g.: CC-PLX-10-AC (* - always valved)
613

HFC series DN 12,7
Material:
Polypropylene (up to 4,2 bar)

Polysulfone (up to 8,6 bar)
Polysulfone UV (up to 8,6 bar)
Seal:
EPDM
Working temp.: From 0C up to +71C (polypropylene)
From -40C up to +138C (polysulfone)
Couplings designed for water, chemical, food and pneumatic installations, bioprocesses, pharmaceutical production,
medical devices, etc. They are very lightweight in comparison with traditional heavy couplings with locking balls and
ferrule. An ergonomic design and a large push button make it easy to grip and operate. An efficient valve design
ensures high flow rates and minimum spillage. In addition the coupling allows some rotation of the connected
hose. This feature prevents kinking and accidental disconnection during use. Application: chemical photographic
processing, battery and accumulator filling installations, spraying equipment, pneumatic installations and antifreeze
fluid systems, etc.
HFC couplings are also available: with valve inner parts made of Hastelloy, with BSPT male thread or 3/4 GHT
male thread. The couplings made of polysulfone are highly resistant to chemicals and mechanical impact. Can be
sterilized in an autoclave. UV version is resistant to ultraviolet radiation.
picture
description
1
3
socket
6
1
2
2
plug
3
4

with 3/4 GHT female thread
with 3/4 BSP female thread
panel mount for 3/8 hose (O.D.)
panel mount for 1/2 hose (O.D.)
for 3/8 hose
for 1/2 hose
for 5/8 hose
for 3/4 hose
for 3/8 hose (O.D.)
for 1/2 hose (O.D.)
for 3/8 hose
for 1/2 hose
for 5/8 hose
for 3/4 hose
for 3/8 hose (O.D.)
for 1/2 hose (O.D.)
with 3/4 GHT femele thread
with 3/4 BSP female thread
polypropylene
CC-HFV-01-PP
CC-HFV-02-PP
CC-HFV-03-PP
CC-HFV-06-PP
CC-HFV-07-PP
CC-HFV-08-PP
CC-HFV-09-PP
CC-HFV-10-PP
CC-HFV-11-PP
CC-HFV-12-PP
CC-HFV-13-PP
CC-HFV-14-PP
CC-HFV-15-PP
CC-HFV-16-PP
CC-HFV-17-PP
CC-HFV-18-PP
CC-HFV-19-PP
CC-HFV-20-PP
CC-HFV-21-PP
CC-HFV-22-PP
CC-HFV-23-PP
CC-HFV-24-PP
CC-HFV-25-PP
CC-HFV-26-PP
CC-HFV-27-PP
CC-HFV-28-PP
-
code
polysulfone
CC-HFV-01-PS
CC-HFV-02-PS
CC-HFV-03-PS
CC-HFV-04-PS
CC-HFV-05-PS
CC-HFV-06-PS
CC-HFV-07-PS
CC-HFV-08-PS
CC-HFV-09-PS
CC-HFV-12-PS
CC-HFV-13-PS
CC-HFV-14-PS
CC-HFV-15-PS
CC-HFV-18-PS
CC-HFV-19-PS
CC-HFV-20-PS
CC-HFV-21-PS
CC-HFV-22-PS
CC-HFV-23-PS
CC-HFV-24-PS
CC-HFV-27-PS
CC-HFV-28-PS
CC-HFV-29-PS
CC-HFV-30-PS
polysulfone UV
CC-HFV-02-PSU
CC-HFV-04-PSU
CC-HFV-05-PSU
CC-HFV-06-PSU*
CC-HFV-07-PSU*
CC-HFV-08-PSU*
CC-HFV-09-PSU*
CC-HFV-12-PSU
CC-HFV-13-PSU
CC-HFV-14-PSU
CC-HFV-15-PSU
CC-HFV-19-PSU
CC-HFV-21-PSU
CC-HFV-22-PSU
CC-HFV-23-PSU
CC-HFV-24-PSU
CC-HFV-29-PSU
CC-HFV-30-PSU
Note!
The codes given above apply to versions with valves. A code example of the version without the valve e.g.: CC-HFX-10-PP (* - always valved)
614

MPC series DN 6,4 DN 9,5
Material:
Polycarbonate (silicone O-ring)

Polysulfone (silicone O-ring)
ABS (silicone O-ring)
Working temp.: From -40C up to +120C (polycarbonate)
From -40C up to +70C (ABS)
Quick release couplings for medical application. The couplings allow for some rotation of the connected hose thus
preventing its potential kinking. Easy to operate (even in rubber gloves). The couplings made of polycarbonate and
polysulfone are equipped with locking ferrules that protect against accidental disconnections. Meet USP Class VI
requirements. Sterilized in an autoclave at +120C for 30 min up to 10 cycles (polycarbonate), +130C for 60 min
up to 25 cycles (polysulfone) or gamma rays (up to 50 kGY).
picture
polycarbonate
code
polysulfone
ABS
for 1/4 hose without locking ferrule
CC-MPC-01-PW
CC-MPC-01-PS
CC-MPC-01-AB
for 1/4 hose with locking ferrule
CC-MPC-02-PW
CC-MPC-02-PS
CC-MPC-02-AB
for 3/8 hose
CC-MPC-03-PW
CC-MPC-03-PS
CC-MPC-03-AB
CC-MPC-04-PW
CC-MPC-04-PS
CC-MPC-04-AB
for 1/4 hose
CC-MPC-05-PW
CC-MPC-05-PS
CC-MPC-05-AB
for 3/8 hose
CC-MPC-06-PW
CC-MPC-06-PS
CC-MPC-06-AB
CC-MPC-07-PW
CC-MPC-07-PS
without locking ferrule
CC-MPC-08-PW
CC-MPC-08-PS
with locking ferrule
CC-MPC-09-PW
CC-MPC-09-PS
description
socket
plug
socket
cup
plug
cap
615

MPX series DN 9,5 DN 12,7
Material:
Polycarbonate (silicone O-ring)

Polysulfone (silicone O-ring)
Working temp.: From -40C up to +120C (polycarbonate)
Quick release couplings for medical applications. The couplings allow for some rotation of the connected hose thus
preventing its potential kinking. Easy to operate (even in rubber gloves). The couplings made of polycarbonate and
polysulfone are equipped with locking ferrules that protect against accidental disconnections. Meets USP Class
VI requirements. Sterilized in an autoclave at +120C for 30 min up to 10 cycles (polycarbonate), +130C for 60
min up to 25 cycles (polysulfone) or gamma rays (up to 50 kGY).
picture
code
description
polycarbonate
polysulfone
for 1/2 hose without locking ferrule
CC-MPX-01-PW
CC-MPX-01-PS
CC-MPX-02-PW
CC-MPX-02-PS
for 3/8 hose
CC-MPX-03-PW
CC-MPX-03-PS
for 1/2 hose
CC-MPX-04-PW
CC-MPX-04-PS
CC-MPX-05-PW
CC-MPX-05-PS
without locking ferrule
CC-MPX-06-PW
CC-MPX-06-PS
with locking ferrule
CC-MPX-07-PW
CC-MPX-07-PS
socket
plug
socket
cup
plug
cap
SANIQUIK adaptors with TRICLOVER flanges are designed for quick connection of fixed installations with MPC
and MPX type couplings. Sterilized in an autoclave.
for coupling
type
installation
DN
[inch]
flange diameter
[mm]
length
[mm]
CC-SQMPC-01
MPC
3/4
22,6
35,3
CC-SQMPC-02
MPC
1.1/2
50,3
38,1
CC-SQMPX-01
MPX
3/4
22,6
39,1
code
616
CC-SQMPX-02
MPX
50,3
38,1
CC-SQMPX-03
MPX
1.1/2
50,3
38,1
description
Material: AISI 316L.

O-ring: silicone (USP Class VI).
Working temp.: from -40C up to
+150C.

CQG 06 series
Material:
Spring:
Seal:
Working press.:
Working temp.:
Leakage:
Polypropylene
Hastelloy
Viton
Up to 5 bar
From -5C up to +65C
< 0,1 ml
Non-spill quick release couplings for laboratory applications. Feature broad chemical resistance and high flow
rate. Easy to connect/disconnect, even under pressure.
picture
description
socket
plug
code
with hose tail for 3/8 hose
CC-CQG-01
CC-CQG-02
CC-CQG-03
CC-CQG-04

adaptor for panel mount assembly
CC-CQG-05
CC-CQG-06
CC-CQG-07
CC-CQG-08
CC-CQG-09
CC-CQG-10
CC-CQG-11
617
INDUSTRIAL FITTINGS - valves

General purpose ball valves
Mini ball valve 6400/6410 type
Body material:
Ball material:
Ball seal:
Working temp.:
Nickel-plated brass
Chrome-plated brass
PTFE
A general purpose mini ball valve designed for industrial installations. Used for air, gases, water, chemicals,
petrochemical products, etc.
code
AI-6400-02
AI-6400-04
AI-6400-06
AI-6400-08
AI-6400-12
AI-6410-02
AI-6410-04
AI-6410-06
AI-6410-08
AI-6410-12
flow diameter
[mm]
length
[mm]
thread size
[inch]
working pressure
[bar]
6400 type (2 x BSP female thread)

5,5
35
1/8
5,5
37
1/4
8
42
3/8
10
49
1/2
14
58
3/4
6410 type (BSP male thread / BSP female thread)
5,5
34
1/8
5,5
35
1/4
8
39
3/8
10
45
1/2
14
52
3/4
20
20
20
20
20
20
20
20
20
20
Mini ball valve 4010/4011 type

Body material:
Ball material:
Ball seal:
Working temp.:
Nickel-plated brass
Chrome-plated brass
PTFE
A general purpose mini ball valve designed for industrial installations. Used for air, gases, water, chemicals,
petrochemical products, etc.
code
RV-4010-06
RV-4010-10
RV-4010-13
RV-4010-19
RV-4011-06
RV-4011-10
RV-4011-13
RV-4011-19
618
flow diameter
[mm]
length
[mm]
thread size
[inch]

8
40
1/4
8
40
3/8
10
44
1/2
15
48
3/4
6
39
1/4
6
39
3/8
10
43
1/2
13
50
3/4
working pressure
[bar]
10
10
10
10
10
10
10
10

A ball valve designed for air and water. Made of zinc-plated steel (ball made of brass). Working pressure 10 bar.
Connection: male thread, claw coupling (lug dimension 42 mm) with rubber or brass seal.
code
inlet
outlet
MU-125
3/4 female
3/4 male
MU-124
1 female
3/4 male
MU-105
3/4 female
MU-904
MU-104
1 female
MU-904
MU-115
3/4 female
MU-954
MU-114
1 female
MU-954
A double ball valve designed for air and water. Made of zinc-plated steel (ball made of brass). Working pressure
10 bar. Connection: male thread, claw coupling (lug dimension 42 mm) with rubber or brass seal.
code
inlet
outlet
MU-224
3/4 female
2 x 3/4 male
MU-223
1 female
2 x 3/4 male
MU-204
3/4 female
2 x MU-904
MU-203
1 female
2 x MU-904
MU-214
3/4 female
2 x MU-954
MU-213
1 female
2 x MU-954
code
Inlet
outlet
cone
MU-301
MU-302
MU-303
MU-307
MU-304
MU-305
3/4 male
3/4 male
1 male
1 male
1 male
2 male
3/4 male
Rd32x1/8 male
Rd32x1/8 male
1 male
Rd38x1/8 male
Rd75x1/6 male
1:4
1:3
1:3
1:3
1:3
1:3
A ball valve designed for pneumatic hammers. Made of zinc-plated steel (ball made of brass). Working pressure
25 bar.
619

Ball valve 4170/4330 type
Body material:
Ball material:
Handle material:
Ball seal:
Working temp.:
Nickel-plated brass
Chrome-plated brass
Aluminium
PTFE
A general purpose ball valve designed for industrial installations. Used for air, gases, water, steam, chemicals,
petrochemical products, etc. Working pressure depends on working temperature.
code
RV-4170-006
RV-4170-010
RV-4170-013
RV-4170-019
RV-4170-025
RV-4170-032
RV-4170-038
RV-4170-050
RV-4170-065
RV-4170-075
RV-4170-100
RV-4330-006
RV-4330-010
RV-4330-013
RV-4330-019
RV-4330-025
RV-4330-032
RV-4330-038
RV-4330-050
RV-4330-065
RV-4330-075
RV-4330-100
flow diameter
[mm]
thread size
[inch]
4170 type * (2 x BSP female thread)

8
38
1/4
10
42
3/8
14,5
48
1/2
19
57
3/4
24
69
1
30,5
79
1.1/4
37
89
1.1/2
47
109
2
60
126
2.1/2
75
147
3
94
177
4
8
45
1/4
10
48
3/8
14,5
55
1/2
19
65
3/4
24
77
1
30,5
87
1.1/4
37
101
1.1/2
47
117
2
60
136
2.1/2
75
157
3
94
189
4
* available with steel handle - 4171 type.
620
length
[mm]
working pressure
[bar]
40
40
40
32
32
25
25
25
25
16
16
40
40
40
32
32
25
25
25
25
16
16

Ball valve 4190/4350/4420 type
Body material:
Ball material:
Ball seal:
Working temp.:
Nickel-plated brass
Chrome-plated brass
PTFE
code
RV-4190-006
RV-4190-010
RV-4190-013
RV-4190-019
RV-4190-025
RV-4190-032
RV-4190-038
RV-4190-050
RV-4190-065
RV-4190-075
RV-4190-100
RV-4350-010
RV-4350-013
RV-4350-019
RV-4350-025
RV-4350-032
RV-4350-038
RV-4350-050
RV-4350-065
RV-4350-075
RV-4350-100
RV-4420-13
RV-4420-19
RV-4420-25
RV-4420-32
RV-4420-38
RV-4420-50
flow diameter
[mm]
length
[mm]
thread size
[inch]

10
45
1/4
10
45
3/8
15
59
1/2
20
69
3/4
25
83
1
32
94
1.1/4
40
102
1.1/2
50
124
2
65
148
2.1/2
80
171
3
100
206
4
4350 type (BSPT male thread / BSP female thread)
10
52
3/8
15
66
1/2
20
76
3/4
25
91
1
32
101
1.1/4
40
113
1.1/2
50
134
2
65
164
2.1/2
80
187
3
100
221
4
4420 type (2 x BSPT male thread)
15
71
1/2
20
82
3/4
25
97,5
1
32
108
1.1/4
40
122
1.1/2
50
146
2
working pressure
[bar]
64
64
64
40
40
40
40
40
40
32
25
64
64
40
40
40
40
40
40
32
25
64
40
40
40
40
40
621

Body material:
Ball material:
Ball seal:
Working temp.:
Nickel-plated brass
Chrome-plated brass
PTFE
code
RV-4174-06
RV-4174-10
RV-4174-13
RV-4174-19
RV-4174-25
RV-4334-06
RV-4334-10
RV-4334-13
RV-4334-19
RV-4334-25
flow diameter
[mm]
length
[mm]
thread size
[inch]

8
38
1/4
10
42
3/8
14,5
48
1/2
19
57
3/4
24
69
1
4334 type (BSP male thread BSP / BSP female thread)
8
45
1/4
10
48
3/8
14,5
55
1/2
19
65
3/4
24
77
1
working pressure
[bar]
40
40
40
32
32
40
40
40
32
32
Ball valve
4194/4354/4424 type
Body material:
Ball material:
Ball seal:
Working temp.:
Nickel-plated brass
Chrome-plated brass
PTFE
code
RV-4194-06
RV-4194-10
RV-4194-13
RV-4194-19
RV-4194-25
RV-4354-10
RV-4354-13
RV-4354-19
RV-4354-25
RV-4424-13
RV-4424-19
RV-4424-25
622
flow diameter
[mm]
length
[mm]
thread size
[inch]

10
45
1/4
10
45
3/8
15
59
1/2
20
69
3/4
25
83
1
4354 type (BSPT male thread / BSP female thread)
10
52
3/8
15
66
1/2
20
76
3/4
25
91
1
4424 type (2 x BSPT male thread)
15
71
1/2
20
82
3/4
25
97,5
1
working pressure
[bar]
64
64
64
40
40
64
64
40
40
64
40
40

Ball valve 4500 type
Body material:
Ball material:
Seal:
Connection:
Working temp.:
Nickel-plated brass
Chrome-plated brass
PTFE
BSP female thread
A general purpose ball valve with a mounting pad for an actuator designed for industrial installations. Used for air,
gases, water, steam, chemicals, petrochemical products, etc. Working pressure depends on working temperature.
code
DN
thread size
[inch]
actuator type
ISO 5211
length
[mm]
working pressure
[bar]
RV-4500-15
RV-4500-20
RV-4500-25
RV-4500-32
RV-4500-40
RV-4500-50
15
20
25
32
40
50
1/2
3/4
1
1.1/4
1.1/2
2
M1 (F03)
M1 (F03)
M1 (F03)
M1 (F03)
M4 (F05)
M4 (F05)
59
69
83
94
102
124
40
40
40
25
25
25

Body material:
Ball material:
Ball seal:
Connection:
Working temp.:
Cast iron
Chrome-plated brass
PTFE
PN16 flanges
A general purpose flanged ball valve designed for industrial installations. Used for air, gases, water, steam, chemicals,
code
DN
[mm]
length
[mm]
flange O.D.
[mm]
number of bolts
x thread
working pressure
[bar]
RV-5550-020
RV-5550-025
RV-5550-032
RV-5550-040
RV-5550-050
RV-5550-065
RV-5550-080
RV-5550-100
RV-5550-125
RV-5550-150
RV-5550-200
20
25
32
40
50
65
80
100
125
150
200
120
125
130
140
150
170
180
190
200
210
400
105
115
140
150
165
185
200
220
250
285
340
4xM12
4xM12
4xM16
4xM16
4xM16
4xM16
8xM16
8xM16
8xM16
8xM20
12xM20
16
16
16
16
16
16
16
16
16
16
16
623

Body material:
Ball material:
Seal:
Working temp.:
Connection:
Nickel-plated brass
Chrome-plated brass
PTFE
BSP female thread
code
thread size
[inch]
RV-5310-006
RV-5310-010
RV-5310-013
RV-5310-019
RV-5310-025
RV-5310-032
RV-5310-038
RV-5310-050
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
RV-5311-006
RV-5311-010
RV-5311-013
RV-5311-019
RV-5311-025
RV-5311-032
RV-5311-038
RV-5311-050
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
T boring
624
flow diameter
[mm]
5310 type (T boring)
10
12
14
18
23
29
36
45
5311 type (L boring)
10
12
14
18
23
29
36
45
length
[mm]
working pressure
[bar]
77
77
77
92
104
118
138
162
25
25
25
25
25
25
25
25
77
77
77
92
104
118
138
162
25
25
25
25
25
25
25
25
L boring

Ball valves - Full Flow
Ball valve FF type
Material:
Body, ball - aluminium

Spindle - stainless steel
Connections - Al, St, SS
Sealing:
Viton / PTFE - valve PUR - connections
Connection:
thread: BSP , NPT,
flanges: DIN, ASA,TW
Application
Full flow ball valves are widely used in road, rail, air transport as well as in petrochemical industry. Meet all
requirements regarding safety, environment protection and reliability during hazardous and valuable fluid transfer.
A version with pneumatic actuator available.
Standards
Meets ATEX, ADR, RID, IMDG, TDT standards.
picture
Repair kit
Set of valve seals
Repair kit
Flat seal
Set of spare parts
code
connection
material
MK-FFV-B210A1101
MK-FFV-B210A1301
MK-FFV-B211A1101
MK-FFV-B414A1101
MK-FFV-B414A1301
MK-FFV-B415A1101
MK-FFV-B516A1101
MK-FFV-B516A1301
MK-FFV-B517A1101
MK-FFV-B278A1101
2 BSP female
2 BSP female
2 NPT female
3 BSP female
3 BSP female
3 NPT female
4 BSP female
4 BSP female
4 NPT female
2 BSP male
aluminium
carbon steel
aluminium
aluminium
carbon steel
aluminium
aluminium
carbon steel
aluminium
aluminium
seal
valve
thread
PUR
weight
[kg]
2,20
2,60
2,30
4,70
4,00
7,10
10,00
7,50
2,00
MK-FFV-B482A1101
3 BSP male
aluminium
3,80
MK-FFV-B482A1301
3 BSP male
carbon steel
4,70
MK-FFV-B584A1101
4 BSP male
aluminium
MK-FFV-B584A1301
4 BSP male
carbon steel
MK-FFV-B287A1101
TW1 / 50
MK-FFV-B465A1101
TW1 / 80
MK-FFV-B566A1101
TW3 / 100
8,00
MK-FFV-B433A1101
MK-FFV-B436A1101
MK-FFV-B459A1101
MK-FFV-B461A1101
MK-FFV-B539A1101
MK-FFV-B563A1101
MK-FFV-O-B2-01
MK-FFV-O-B4-01
MK-FFV-O-B5-01
MK-1052-09
MK-1110-09
MK-1295-09
MK-FFV-S-B2-11
MK-FFV-S-B2-13
MK-FFV-S-B4-11
MK-FFV-S-B4-13
MK-FFV-S-B5-11
MK-FFV-S-B5-13
DN 65 PN 10/16
DN 80 PN 10/16
2.1/2 ASA 150
3 ASA 150
DN 100 PN 10/16
4 ASA 150
2
3
4
2
3
4
2
2
3
3
4
4
5,40
5,90
9,60
10,00
Viton /
PTFE
7,50
10,00
3,30
-
aluminium
aluminium
5,50
Viton /
PTFE
PUR
aluminium
carbon steel
aluminium
carbon steel
aluminium
carbon steel
0,003
0,006
0,009
625

Ball valves for gas system applications
Body material:
Ball material:
Ball seal:
Connection:
Working temp.:
Nickel-plated brass
Chrome-plated brass
PTFE
BSPT female thread
A general purpose ball valve designed for gas installations.

code
flow diameter
[mm]
length
[mm]
thread size
[inch]
working pressure
[bar]
RV-7160-006
RV-7160-010
RV-7160-013
RV-7160-019
RV-7160-025
RV-7160-032
RV-7160-038
RV-7160-050
RV-7160-065
RV-7160-075
RV-7160-100
10
10
15
20
25
32
40
50
65
80
100
45
45
59
69
83
94
102
124
148
171
206
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
5
5
5
5
5
5
5
5
5
5

Body material:
Ball material:
Ball seal:
Connection:
Working temp.:
Nickel-plated brass
Chrome-plated brass
PTFE
BSPT female thread
A general purpose ball valve designed for gas installations. Meets EN 331 standard.
626
code
flow diameter
[mm]
length
[mm]
thread size
[inch]
working pressure
[bar]
RV-7164-06
RV-7164-10
RV-7164-13
RV-7164-19
RV-7164-25
10
10
15
20
25
45
45
59
69
83
1/4
3/8
1/2
3/4
1
5
5
5
5
5

Gate valves
Gate valve 2000 type
Body material: Brass
Connection:
BSP female thread
A general purpose gate valve designed for industry installations.

code
flow diameter
[mm]
length
[mm]
thread size
[inch]
working pressure
[bar]
RV-2000-06
RV-2000-10
RV-2000-13
RV-2000-19
RV-2000-25
RV-2000-32
RV-2000-38
RV-2000-50
13
13
14
15
19
27
33
45
33
33
35
40
43
48
53
58
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
10
10
10
10
10
10
10
10

Connection:
BSP female thread
A general purpose gate valve designed for industry installations.

code
flow diameter
[mm]
length
[mm]
thread size
[inch]
working pressure
[bar]
RV-2010-013
RV-2010-019
RV-2010-025
RV-2010-032
RV-2010-038
RV-2010-050
RV-2010-065
RV-2010-075
RV-2010-090
RV-2010-100
RV-2010-125
RV-2010-150
15
19
24
32
37
47
60
72
83
93
117
143
38
44
48
51
58
63
65
74
82
86
95
105
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
3.1/2
4
5
6
16
16
16
16
16
16
16
16
16
16
10
10
627

Gate valves
Piston gate valve
Material:
Working temp.:
Connection:
Power:
Brass
Square flanges (O-ring sealing)
Pneumatic actuator
- max. pressure 12 bar
- recommended pressure 6 bar
A piston gate valve allows quick opening and closing of the fluid flow. Available in several versions: with pneumatic,
single or double acting hydraulic actuator, with flanged connections, BSP or NPT thread. Widely used in agriculture,
septic tank trucks, industry.
code
DN
[inch]
RV-0010-100
RV-0010-125
RV-0010-150
RV-0010-200
RV-0013-100
RV-0013-125
RV-0013-150
RV-0013-200
4
5
6
8
4
5
6
8
connection
bolt spacing
[mm]
150
150
150
180
150
150
150
180
flow
diameter
[mm]
91
120
143
191
91
120
143
191
build-in
length
[mm]
97
97
97
112
97
97
97
112
working
pressure
[bar]
3
3
2,5
1,5
3
3
2,5
1,5
weight
[kg]
6,01
7,47
8,08
17,94
9,96
11,57
12,19
22,19
version
without
actuator
with pneumatic
actuator (two
side operation)
Lever gate valve
Material:
Brass
Connection:
BSP female thread
(NPT available)
A lever gate valve allows quick opening and closing of the fluid flow. Two horizontally pivoted discs design ensures
perfect valve tightness. Widely used in agriculture, septic tank trucks, industry.
628
code
thread size
[inch]
flow diameter
[mm]
build-in length
[mm]
weight
[kg]
working pressure
[bar]
RV-0560-050
RV-0560-065
RV-0560-075
RV-0560-100
2
2.1/2
3
4
49
59
70
93
75
80
86
92
1,65
3,25
3,92
5,82
16
16
16
16

Butterfly valves
Butterfly valve 1125 type
Body material:
Disc material:
Seal:
Connection:
Working temp.:
Cast iron
Nickel-plated cast iron
EPDM
PN10/PN16 flange
A general purpose butterfly valve designed for industrial installations. Opened and closed manually or with a
pneumatic actuator. Equipped with 10-position locking handle - open, closed and intermediate positions .
code
(manual operation)
code
(pneumatic operation)
DN
actuator type
ISO 5211
weight
[kg]
TD-1125-040H
TD-1125-050H
TD-1125-065H
TD-1125-080H
TD-1125-100H
TD-1125-125H
TD-1125-150H
TD-1125-200H
TD-1125-250H
TD-1125-300H
TD-1125-040P
TD-1125-050P
TD-1125-065P
TD-1125-080P
TD-1125-100P
TD-1125-125P
TD-1125-150P
TD-1125-200P
TD-1125-250P
TD-1125-300P
40
50
65
80
100
125
150
200
250
300
F03/F05
F03/F05
F05
F05
F05/F07
F05/F07
F05/F07
F07/F10
F07/F10
F07/F10
2,00
2,50
3,10
3,85
4,75
6,35
8,50
13,00
29,75
37,65
working
pressure
[bar]
16
16
16
16
16
16
16
16
10
10

Body material:
Disc material:
Seal:
Connection:
Working temp.:
Cast iron
AISI 316
EPDM
PN10/PN16 flange
A general purpose butterfly valve designed for industrial installations. Opened and closed manually or with a
pneumatic actuator. Equipped with 10-position locking handle open, closed and intermediate positions .
code
(manual operation)
code
DN
actuator type
ISO 5211
weight
[kg]
TD-1123-040H
TD-1123-050H
TD-1123-065H
TD-1123-080H
TD-1123-100H
TD-1123-125H
TD-1123-150H
TD-1123-200H
TD-1123-250H
TD-1123-300H
TD-1123-040P
TD-1123-050P
TD-1123-065P
TD-1123-080P
TD-1123-100P
TD-1123-125P
TD-1123-150P
TD-1123-200P
TD-1123-250P
TD-1123-300P
40
50
65
80
100
125
150
200
250
300
F03/F05
F03/F05
F05
F05
F05/F07
F05/F07
F05/F07
F07/F10
F07/F10
F07/F10
2,00
2,50
3,10
3,85
4,75
6,35
8,50
13,00
29,75
37,65
working
pressure
[bar]
16
16
16
16
16
16
16
16
10
10
629

Butterfly valves
Body material:
Disc material:
Seal:
Connection:
Working temp.:
Cast iron
AISI 316
EPDM
PN10/PN16 flange
A general purpose butterfly valve designed for industrial application in potentially explosive atmospheres (Ex
marking). Opened and closed manually or with a pneumatic actuator. Equipped with 9-position locking handle
open, closed and intermediate positions.
code
(manual operation)
code
DN
actuator type
ISO 5211
weight
[kg]
TD-1153-032H
TD-1153-040H
TD-1153-050H
TD-1153-065H
TD-1153-080H
TD-1153-100H
TD-1153-125H
TD-1153-150H
TD-1153-200H
TD-1153-250H
TD-1153-300H
TD-1153-350H
TD-1153-400H
TD-1153-032P
TD-1153-040P
TD-1153-050P
TD-1153-065P
TD-1153-080P
TD-1153-100P
TD-1153-125P
TD-1153-150P
TD-1153-200P
TD-1153-250P
TD-1153-300P
TD-1153-350P
TD-1153-400P
32
40
50
65
80
100
125
150
200
250
300
350
400
F03/F05
F03/F05
F03/F05
F05
F05
F05/F07
F05/F07
F05/F07
F07/F10
F07/F10
F07/F10
F12
F14
2,00
2,00
3,50
4,50
5,00
6,50
8,00
9,00
15,00
21,50
30,00
39,00
52,00
working
pressure
[bar]
16
16
16
16
16
16
16
16
10
10
10
10
10

Body material: Cast iron
Disc material: AISI 316 (to DN100)
Chromium-plated cast iron
(from DN125)
Seal:
NBR
Connection:
PN16 flange
A general purpose butterfly valve designed for gas industrial installations. Opened and closed manually or with a
pneumatic actuator. Equipped with 9-position locking handle open, closed and intermediate positions.
Compliant with EN 13774 and EN 549 standards.
code
(manual operation)
code
DN
actuator type
ISO 5211
weight
[kg]
TD-1141-040H
TD-1141-050H
TD-1141-065H
TD-1141-080H
TD-1141-100H
TD-1141-125H
TD-1141-150H
TD-1141-200H
TD-1141-040P
TD-1141-050P
TD-1141-065P
TD-1141-080P
TD-1141-100P
TD-1141-125P
TD-1141-150P
TD-1141-200P
40
50
65
80
100
125
150
200
F03/F05
F03/F05
F05
F05
F05/F07
F05/F07
F05/F07
F07/F10
2,00
3,50
4,50
5,00
6,50
8,00
9,00
15,00
630
working
pressure
[bar]
5
5
5
5
5
5
5
5

Check valves and filters
Foot valve 2350 type
Connection:
BSP female thread
A general purpose foot valve designed for industrial installations.

code
thread size
[inch]
length
[mm]
working pressure
[bar]
RV-2350-019
RV-2350-025
RV-2350-032
RV-2350-038
RV-2350-050
RV-2350-065
RV-2350-075
RV-2350-100
RV-2350-125
RV-2350-150
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
70
82
95
103
121
137
173
199
239
267
10
10
8
8
8
6
6
6
6
6
Swing check valve 2251 type

Body material: Brass (do 4), bronze (5 and 6)
Connection:
BSP female thread
A general purpose swing check valve designed for industrial installations.

code
thread size
[inch]
length
[mm]
working pressure
[bar]
RV-2251-013
RV-2251-019
RV-2251-025
RV-2251-032
RV-2251-038
RV-2251-050
RV-2251-065
RV-2251-075
RV-2251-100
RV-2251-125
RV-2251-150
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
47
54
64
76
83
98
116
135
164
206
235
16
16
16
16
16
16
16
16
12
10
10
631

Spring check valve 2280 type
Body material:
Sealing:
Gasket:
Connection:
Working temp.:
Brass
POM
NBR
BSP female thread
A general purpose spring check valve designed for industrial installations. Can be mounted in any position.
code
thread size
[inch]
length
[mm]
working pressure
[bar]
RV-2280-010
RV-2280-013
RV-2280-019
RV-2280-025
RV-2280-032
RV-2280-038
RV-2280-050
RV-2280-065
RV-2280-075
RV-2280-100
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
45
48
53
59
66
71
80
93
104
119
16
16
16
16
10
10
10
8
8
8
Spring check valve 2281 type

Body material:
Sealing:
Gasket:
Connection:
Working temp.:
Brass
Brass
Viton
BSP female thread
A general purpose spring check valve designed for industrial installations. Can be mounted in any position.
632
code
thread size
[inch]
length
[mm]
working pressure
[bar]
RV-2281-013
RV-2281-019
RV-2281-025
RV-2281-032
RV-2281-038
RV-2281-050
RV-2281-065
RV-2281-075
RV-2281-100
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
48
53
59
66
71
80
93
104
119
35
35
35
25
25
25
16
16
16

Filter 2310 type
Material:
Connection:
Working temp.:
Working press.:
AISI 304
BSP male thread
16 bar
A filter used for spring check valves 2280 and 2281 type.
dimensions [mm]
code
thread size
[inch]
RV-2310-010
RV-2310-013
RV-2310-019
RV-2310-025
RV-2310-032
RV-2310-038
RV-2310-050
RV-2310-065
RV-2310-075
RV-2310-100
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
7
8
9
9
11
11
12
13
14
14
51
50
57
57
68
78
95
98
113
131
23
26
32
41
48
55
68
86
99
122
Y-strainer 2500 type

Body material: Brass (1/2 2.1/2)
Bronze (3 and 4)
Sealing:
NBR
Filter refill:
AISI 304
Connection:
BSP female thread
A general purpose Y-strainer used in water supply, sanitary, heating, irrigation and industrial systems.
dimensions [mm]
code
thread size
[inch]
RV-2500-013
RV-2500-019
RV-2500-025
RV-2500-032
RV-2500-038
RV-2500-050
RV-2500-065
RV-2500-075
RV-2500-100
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
11
11
15
15
16
19
21
22
25
34
42
50
63
70
87
108
148
185
52
63
75
91
102
118
150
167
226
633

AISI 316 valves
Body material:
Seal:
Connection:
Working temp.:
AISI 316
PTFE
BSP female thread
A general purpose gate valve designed for industrial installations.

code
DN
[mm]
thread size
[inch]
working pressure
[bar]
HT-2028-08
HT-2028-10
HT-2028-15
HT-2028-20
HT-2028-25
HT-2028-32
HT-2028-40
HT-2028-50
8
10
15
20
25
32
40
50
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
10
10
10
10
10
10
10
10
Ball valve 2017K type

Body material:
Ball material:
Ball seal:
Connection:
Working temp.:
AISI 316
AISI 316
PTFE
BSP female thread
A general purpose ball valve in an economic version designed for industrial applications. Used for air, gases, water,
steam, chemicals, petrochemical products, etc. Working pressure depends on working temperature.
634
code
DN
[mm]
length
[mm]
thread size
[inch]
working pressure
[bar]
HT-2017K-08
HT-2017K-10
HT-2017K-15
HT-2017K-20
HT-2017K-25
HT-2017K-32
HT-2017K-40
HT-2017K-50
8
10
15
20
25
32
40
50
39
44
56,5
59
71
78
83
100
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
63
63
63
63
63
63
63
63

AISI 316 valves
Ball valve 2006SC type
Body material:
Ball material:
Ball seal:
Connection:
Working temp.:
AISI 316
AISI 316
PTFE
BSP female thread
A general purpose ball valve in an economic version designed for industrial installations. Used for air, gases, water,
code
DN
[mm]
length
[mm]
thread size
[inch]
working pressure
[bar]
HT-2006SC-08
HT-2006SC-10
HT-2006SC-15
HT-2006SC-20
HT-2006SC-25
HT-2006SC-32
HT-2006SC-40
HT-2006SC-50
HT-2006SC-65
HT-2006SC-80
8
10
15
20
25
32
40
50
65
80
50
50
59
66
75,5
88,7
98,5
120,6
146,5
167,5
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
63
63
63
63
63
63
63
63
63
63
Ball valve 2013N type

Body material:
Ball material:
Ball seal:
Connection:
Working temp.:
AISI 316
AISI 316
PTFE
BSP female thread
code
DN
[mm]
length
[mm]
thread size
[inch]
working pressure
[bar]
HT-2013N-08
HT-2013N-10
HT-2013N-15
HT-2013N-20
HT-2013N-25
HT-2013N-32
HT-2013N-40
HT-2013N-50
HT-2013N-65
8
10
15
20
25
32
40
50
65
64,5
64,5
66
83,5
95
111
130
151
184
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
63
63
63
63
63
63
63
63
63
635

AISI 316 valves
Ball valve 2019S type
Body material:
Ball material:
Ball seal:
Connection:
Working temp.:
AISI 316
AISI 316
PTFE
PN16 flange
A general purpose flanged ball valve in an economic version designed for industrial installations. Used for air,
gases, water, steam, chemicals, petrochemical products, etc. Working pressure depends on working temperature.
code
DN
[mm]
length
[mm]
working pressure
[bar]
HT-2019S-015
HT-2019S-020
HT-2019S-025
HT-2019S-032
HT-2019S-040
HT-2019S-050
HT-2019S-065
HT-2019S-080
HT-2019S-100
15
20
25
32
40
50
65
80
100
115
120
125
130
140
150
170
180
190
16
16
16
16
16
16
16
16
16
Ball valve 2057N type

Body material:
Ball material:
Ball seal:
Connection:
Working temp.:
AISI 316
AISI 316
PTFE
BSP female thread
code
2057N type (L boring)
code
2057N type (T boring)
DN
[mm]
length
[mm]
thread size
[inch]
working press.
[bar]
HT-2057N-08L
HT-2057N-10L
HT-2057N-15L
HT-2057N-20L
HT-2057N-25L
HT-2057N-32L
HT-2057N-40L
HT-2057N-50L
HT-2057N-08T
HT-2057N-10T
HT-2057N-15T
HT-2057N-20T
HT-2057N-25T
HT-2057N-32T
HT-2057N-40T
HT-2057N-50T
8
10
15
20
25
32
40
50
76
76
76
86
99,1
117,4
123,8
148
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
63
63
63
63
63
63
63
63
636

AISI 316 valves
Check valve 2050 type
Body material:
Seal:
Connection:
Working temp.:
Working press.:
AISI 316
PTFE
BSP female thread
50 bar
A general purpose check valve designed for blocking the return flow of the medium. The valve must be mounted
according to the flow direction marked on its body.
dimensions [mm]
code
DN
[mm]
thread size
[inch]
HT-2050-08
HT-2050-10
HT-2050-15
HT-2050-20
HT-2050-25
HT-2050-32
HT-2050-40
HT-2050-50
HT-2050-65
HT-2050-80
8
10
15
20
25
32
40
50
65
80
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
15
15
15
20
25
32
38
50
65
80
65
65
65
80
90
105
120
140
180
200
46,5
46,5
46,5
68,5
71
74
82,5
95
121,3
138
Y-strainer 2049 type

Body material:
Seal:
Connection:
Working temp.:
Working press.:
AISI 316
PTFE
BSP female thread
50 bar
A strainer (2049 type) is designed for gas systems and compressed air applications. Used for capturing and removal
of impurities from the system.
dimensions [mm]
code
DN
[mm]
thread size
[inch]
HT-2049-08
HT-2049-10
HT-2049-15
HT-2049-20
HT-2049-25
HT-2049-32
HT-2049-40
HT-2049-50
HT-2049-65
HT-2049-80
8
10
15
20
25
32
40
50
65
80
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
1
1
1
1
1
1
1
1
1
1
65
65
65
80
90
105
120
140
180
200
46,5
46,5
46,5
54
67
74
81,5
95
121,3
138
2
2
2
2
2
2
2
2
2
2
637

Safety valves
Safety valve automatically releases a medium when the pressure exceeds a set value thus securing a tank from
bursting out. Once the pressure is stabilized below its set value, the safety valve closes and the medium is not
further released. Safety valves are used for air, non-toxic and non-flammable gases (medium is released to the
atmosphere), steam.
Note!
The precise value of valve working pressure is set by the producer. The producer seals the valve and marks the
value on the valve body. Once the range of the working pressure is selected, the value of the set pressure must
be indicated.
The diameter of a hose supplying the system equipped with a safety valve must not be smaller than the DN of
the valve. Additionally, pressure drop between the supplying hose and the valve must not exceed 3%. In order to
check if the valve works properly, turn the knurled screw at the top of the valve clockwise. Any repairs must be
done by the producer only.
Marking example of EWO safety valve:
CE0685 SV 02 2 8 D/G 0,32 P
set pressure [bar]
flow rate factor
used for gases and steam
flow diameter [mm]
marking number
year of approval
safety valve
technical inspection name - in this case - DEKRA
Definitions:
- set pressure - pressure at which audible leak starts (medium is released to the atmosphere)
- opening pressure - valve fully opened
- closing pressure - valve tightly closed
- opening pressure difference - difference between start-to-leak set pressure and opening pressure
- closing pressure difference - difference between start-to-leak set pressure and closing pressure
Example:
- set pressure - 12.0 bar
- opening pressure (+10%) - 13.2 bar
- closing pressure (-10%) - 10.8 bar
Flow rate of a medium
valve opens when working pressure exceeds set pressure by 10 %
set pressure [bar]
flow rate [m3/h]
flow rate [l/min]
set pressure [bar]

flow rate [m3/h]
flow rate [l/min]
set pressure [bar]

flow rate [m3/h]
flow rate [l/min]
638
6
45,5
763
1
23,5
394
2
74,5
1242
10
92
1540
2
35,5
592
4
59
985
4
124
2068
11
100
1681
8
106
1773
6
174
2895
DN 6 valve
14
126
2104
16
143
2387
DN 8 valve
10
12
16
130
154
201
2168 2562 3350
18
225
3745
DN 10 valve
8
10
12
223
273
323
3722
4548
5377
18
160
2696
20
248
4138
14
372
6203
20
177
2551
22
272
4533
16
422
7032
22
194
3234
25
307
5124
18
471
7858
30
367
6110
24
211
3516
35
426
7095
20
521
8685
40
485
8080
22
571
9513

EWO safety valves
Body material:
Seal:
Connection:
Working temp.:
Assembly position:
code
full flow thread

DN
size
[mm]
[inch]
length
[mm]
spanner
size
[mm]
set
pressure
[bar]
code
Brass
Viton
BSP male thread
Vertical
full flow thread

DN
size
[mm]
[inch]
code
1/4
6
17
65
3/8
full flow thread

DN
size
[mm]
[inch]
19
length
[mm]
spanner
size
[mm]
4,5 7,0
7,0 10,0
10,0 13,0
13,0 18,0
18,0 24,0
4,5 7,0
7,0 10,0
10,0 13,0
13,0 18,0
18,0 24,0
set
pressure
[bar]
DN 10 valve
EW-351261-...
EW-351262-...
EW-351263-...
EW-351264-...
EW-351265-...
EW-351266-...
EW-351267-...
EW-351271-...
EW-351272-...
EW-351273-...
EW-351274-...
EW-351275-...
EW-351276-...
EW-351277-...
1/2
10
27
120
3/4
spanner
size
[mm]
set
pressure
[bar]
DN 8 valve
DN 6 valve
EW-46923-...
EW-46924-...
EW-46925-...
EW-46926-...
EW-46927-...
EW-46933-...
EW-46934-...
EW-46935-...
EW-46936-...
EW-46937-...
length
[mm]
30
2,0 3,6
3,6 5,0
5,0 7,0
7,0 8,5
8,5 11,5
11,5 16,0
16,0 22,0
2,0 3,6
3,6 5,0
5,0 7,0
7,0 8,5
8,5 11,5
11,5 16,0
16,0 22,0
EW-351221-...
EW-351222-...
EW-351223-...
EW-351224-...
EW-351225-...
EW-351226-...
EW-351227-...
EW-351421-...
EW-351422-...
EW-351423-...
EW-351241-...
EW-351242-...
EW-351243-...
EW-351244-...
EW-351245-...
EW-351246-...
EW-351247-...
EW-351441-...
EW-351442-...
EW-351443-...
EW-351251-...
EW-351252-...
EW-351253-...
EW-351254-...
EW-351255-...
EW-351256-...
EW-351257-...
EW-351451-...
EW-351452-...
EW-351453-...
85
1/4
90
20
85
8
3/8
90
87
1/2
24
92
1,0 1,5
1,5 2,0
2,0 3,0
3,0 5,0
5,0 7,0
7,0 9,0
9,0 15
15,0 20,0
20,0 27,0
27,0 40,0
1,0 1,5
1,5 2,0
2,0 3,0
3,0 5,0
5,0 7,0
7,0 9,0
9,0 15,0
15,0 20,0
20,0 27,0
27,0 40,0
1,0 1,5
1,5 2,0
2,0 3,0
3,0 5,0
5,0 7,0
7,0 9,0
9,0 15,0
15,0 20,0
20,0 27,0
27,0 40,0
When ordering, the set pressure should be added to the code.

Code example of DN 6 safety valve with thread 1/4 and set pressure 5.1 bar: EW-46923-5.1.
639

EWO shut-off and regulating valve
Material:
Brass
Working press.: 25 bar for DN 3,5 and 4
40 bar for DN above 4
Shut-off and regulating valves are used to control the flow rate of a medium in a system by changing the size of
passage cross section in the valve until it is completely closed. Widely used for air applications. Suitable for nonflammable and non-toxic gases (nitrogen, carbon dioxide, helium, argon) as well.
The valve is manually closed by turning a knob which causes movement of a stainless steel ball until the passage
is tight. NBR O-ring seals the spindle of the valve.
Regulating needle valve is equipped with a brass cone that controls the flow of a medium from a wide open position
to closed position. Arrows on the body indicate flow direction.
picture
code
thread
size
[inch]
DN
[mm]
EW-29601
1/8
3,5
35
30
22
EW-29611
1/4
3,5
34
30
22
EW-55612
1/4
43
10
50
48
EW-55614
3/8
10
52
12
50
48
EW-55616
1/2
10
64
14
54
48
EW-55622
1/4
43
11
50
48
EW-55624
3/8
52
12
50
48
EW-55626
1/2
11
63
15
57
48
EW-29501
1/8
3,5
34
26
22
dimensions [mm]
description
Straight shut-off valve with

male thread.
Straight shut-off valve with

female thread.
90 shut-off valve with male

thread.
640
EW-29511
1/4
3,5
34
26
22
EW-55812
1/4
42
11
52
50
EW-55814
3/8
42
11
52
50
EW-55816
1/2
11
65
15
60
50
EW-55822
1/4
42
12
50
50
EW-55824
3/8
51
13
50
50
EW-55826
1/2
11
64
15
50
50
Straight regulating needle

valve with male thread.
Straight regulating needle

valve with female thread.

EWO drain valves
Material:
Brass, nickel-plated brass
Working temp.: From 0C up to +90C
Drain valves are used for letting air out in order to balance the pressure in an installation. Also used to remove
condensate. Compressed air can contain steam which upon condensation changes into a mixture of water and
oil called condensate. If the condensate is not removed, the break-down of installation or compressed air units is
possible.
picture
code
thread
size
[inch]
DN
[mm]
SW
EW-16602
1/8
43
20
dimensions [mm]
description
90 drain valve with soft

seal made of NBR.
EW-16612
1/4
43
12
20
EW-21201
1/8
35
40
12
Straight drain valve with
metal-metal seal.
EW-16811
1/4
35
10
42
14
EWO air distributor

Material:
Brass
An air distributor allows to place two or three shut-off valves that can be closed individually whenever required.
Equipped with two shut-off valves and two outlets either with two male threads or hose tails.
picture
code
thread
size
[inch]
DN
[mm]
EW-559621
1/4
79
110
25
Air distributor with 6 mm

hose tail.
EW-559631
3/8
79
110
25
Air distributor with 9 mm

hose tail.
EW-559121
1/4
79
65
25
EW-559131
3/8
79
65
25
dimensions [mm]
description
With male thread outlets
641
INDUSTRIAL FITTINGS - clips, clamps, ferrules

Banding strap assembly system
code
band width range

[inch]
BG-6035000000
1/4 - 3/4
description
Banding strap assembly tool
code
size
[inch]
width
[mm]
length
[m]
BG-6035006000
1/4
6,3
30,5
BG-6035010000
3/8
9,5
30,5
BG-6035013000
1/2
12,7
30,5
BG-6035015000
5/8
15,9
30,5
BG-6035019000
3/4
19
30,5
code
size
[inch]
quantity
[pcs]
BG-6040006000
1/4
100
BG-6040010000
3/8
100
BG-6040013000
1/2
100
BG-6040015000
5/8
100
BG-6040019000
3/4
100
description
Stainless steel strap.
description
Buckles for stainless steel

strap.
MINI CLIP
Rolled-up edges of a MINI hose clip prevent damage of the hose.

A hexagonal, slotted screw head allows screwing with the use of a
flexible hose clamp driver.
MINI CLIP W1 - electro zinc-plated carbon steel.
MINI CLIP W4 - made entirely of AISI 304.
code W1
(galvanized steel)
AB-03010510
AB-03010528
AB-03010536
AB-03010544
AB-03010552
AB-03010560
AB-03010579
AB-03010587
AB-03010595
AB-03010608
AB-03010616
AB-03010624
AB-03010632
AB-03010640
AB-03010659
AB-03010667
AB-03010675
AB-03010683
642
min. / max.
diameter
[mm]
6
8
9
9,5 10
10 11
12 13
13 14
14 15
15 17
16 18
18 20
19 21
20 22
22 25
23 26
25 28
26 29
29 32
tightening
torque*
[Nm]
0,4
0,4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
max. press.
medium*
[bar]
15
14
15
14
13
12,5
12,5
12
12
11,5
10,5
10,5
10,5
9,5
9
8,5
8,5
8
code W4
(AISI 304)
size
AB-622008
AB-622009
AB-622010
AB-622011
AB-622012
AB-622013
AB-622014
AB-622015
AB-622016
AB-622017
8
9
10
11
12
13
14
15
16
17
min. / max.
diameter
[mm]
7,5 8,5
8,5 9,5
9,5 11
10,5 12
11,5 13
12,5 14
13,5 15
14,5 16
15 17
16 18
- depending on hose type and connection part
tightening
torque
[Nm]
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5

EAR CLIP
EAR CLIP hose clips are simple to use and inexpensive. They are
easy and fast to mount with special ear clamp pliers that are also
used to disassemble the clips.
EAR CLIP with 1 ear

code W1
(galvanized steel)
code W4
(AISI 304)
I.D.
[mm]
diameter range
[mm]
band thickness
[mm]
band width
[mm]
AB-03012080
AB-03012072
AB-03012013
AB-03012021
AB-03012030
AB-03012048
AB-03012056
AB-03012064
-
AB-23012440
AB-23012087
AB-23012010
AB-23012028
AB-23012036
AB-23012044
AB-23012079
AB-23012052
AB-23012060
AB-23012423
AB-23012431
9,3
10,3
11,3
12,3
13,3
14,3
15,3
16,3
18,5
19,5
20,5
79
8 10
9 11
10 12
11 13
12 14
13 15
14 16
16 18
17 19
18 20
0,8
0,8
0,8
0,8
0,9 (W4 - 0,8)
1
1
1,1 (W4 - 1)
1,2 (W4 - 1)
1
1
6
6
6,5
6,5
6,5
7
7
7
7
7,5
7,5
code W1
(galvanized steel)
code W4
(AISI 304)
I.D.
[mm]
diameter range
[mm]
band thickness
[mm]
band width
[mm]
AB-03012101
AB-03012110
AB-03012128
AB-03012099
AB-03012136
AB-03012144
AB-03012152
AB-03012160
AB-03012179
AB-03012187
AB-03012195
AB-03012208
AB-03012216
AB-03012224
AB-03012232
AB-03012240
AB-03012259
AB-03012267
AB-03012275
AB-03012283
AB-23012108
AB-23012116
AB-23012124
AB-23012132
AB-23012140
AB-23012159
AB-23012167
AB-23012175
AB-23012183
AB-23012191
AB-23012204
-
7,3
9,3
11,3
12,3
13,3
15,3
17,5
18,5
20,5
21,5
23,5
25,5
27,5
28,5
31,5
34,5
37,5
40,5
43,5
46,5
57
79
9 11
10 12
11 13
13 15
14 17
15 18
17 20
18 21
20 23
22 25
23 27
25 28
28 31
31 34
34 37
37 40
40 43
43 46
0,6
0,8
0,8
0,9
0,9 (W4 - 0,8)
1,0
1,2 (W4 - 1)
1,2 (W4 - 1)
1,2 (W4 - 1)
1,2 (W4 - 1)
1,3 (W4 - 1)
1,4 (W4 - 1,2)
1,4
1,4
1,4
1,4
1,6
1,6
1,6
1,6
6
6
6,5
6,5
6,5
7
7
7,5
7,5
8
8
8,5
8,5
9
9
9,5
9,5
10
10
10,5
EAR CLIP with 2 ears
EAR CLIP standard pliers
AB-61001
Flexible hose clamp driver for band clamps
AB-9999V
643

EAR CLIP - W
EAR CLIP hose clips are simple to use and inexpensive. They are
easy and fast to mount with special ear clamp pliers that are also
used to disassemble the clips. The inner liner protects the hose
against any damage.
EAR CLIP with 1 ear (with inner liner)

code W1
(galvanized steel)
code W4
(AISI 304)
I.D.
[mm]
diameter range
[mm]
band thickness
[mm]
band width
[mm]
AB-03011009
AB-03011010
AB-03011029
AB-03011037
AB-03011045
AB-03011053
AB-03011061
AB-03011070
-
AB-23012300
AB-23012319
AB-23012327
AB-23012335
AB-23012343
AB-23012351
AB-23012360
AB-23012378
AB-23012386
AB-23012394
AB-23012407
AB-23012415
8,5
9,5
10,5
11,5
12,5
13,3
14,5
15,3
16,3
17,3
18,3
19,3
7,5 8,5
8 9,5
9 10,5
10 11,5
10,5 12,5
11,5 13,3
12,5 14,5
13 15,3
14 16,3
15 17,3
16 18,3
17 19,3
0,8
0,8
0,8
0,8
0,9 (W4 - 0,8)
1
1
1,1 (W4 - 1)
1
1,2 (W4 - 1)
1
1
6
6
6,5
6,5
6,5
7
7
7
7
7
7,5
7,5
WIRE CLIP
A wire spring clip is designed for quick mounting of low-pressure hoses.

Made of zinc-plated spring steel.
644
code
min. diameter
[mm]
max. diameter
[mm]
wire
[mm]
AB-02016012
AB-02016020
AB-02016039
AB-02016047
AB-02016055
AB-02016063
AB-02016071
AB-02016080
AB-02016098
AB-02016100
AB-02016119
AB-02016127
AB-02016135
AB-02016143
AB-02016151
AB-02016160
AB-02016178
AB-02016186
AB-02016194
7,3
7,8
8,3
8,8
9,3
9,8
10,4
11
11,6
12,1
12,9
13,6
14,4
14,8
15,9
16,8
17,7
18,7
19,6
7,8
8,3
8,8
9,3
9,9
10,4
11
11,6
12,3
13,1
13,6
14,4
15,1
15,9
16,8
17,7
18,7
19,6
20,6
1
1
1
1
1
1,2
1,2
1,2
1,5
1,5
1,5
1,5
1,8
1,8
1,8
1,8
2
2
2

ASFA-L 9 mm
A general purpose, worm drive hose clamp designed for easy and
quick mounting of low-pressure hoses. Manufactured according to
the requirements of DIN 3017 standard. W5 version, made entirely
of AISI 316 steel, is recommended for food, chemical and marine
industry application, etc.
code W1
(galvanized steel)
code W5
(AISI 316)
AB-03008753
AB-03008761
AB-03008770
AB-03008788
AB-03008796
AB-03008809
AB-03008817
AB-03008825
AB-03008833
AB-03008841
AB-03008850
AB-03008868
AB-03008876
AB-03008884
AB-03008892
AB-03008905
AB-03008913
AB-03008921
AB-03015759
AB-03015767
AB-03015775
AB-03015783
AB-03015804
AB-03015812
AB-03015820
AB-03015839
AB-03015847
AB-03015855
AB-03015863
AB-03015871
AB-03015880
AB-03015898
AB-03015900
AB-03015919
AB-03015927
AB-03015935
min / max
diameter range
[mm]
8 16
12 22
16 27
20 32
25 40
30 45
32 50
40 60
50 70
60 80
70 90
80 100
90 110
100 120
110 130
120 140
130 150
140 160
band thickness
[mm]
tightening torque*
[Nm]
0,6
0,6
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
0,7
3
3
3,5
3,5
4
4
4
4
4
4
4
4
4
4
4
4
4
4
max. medium
pressure*
[bar]
45
45
42
36
32
28
24
19
17
15
13
11
10
9
8
7
6
5
ASFA-S 12 mm
A general purpose hose clamps designed for quick and easy

clamping of low-pressure hoses. Manufactured in accordance with
DIN 3017 standard. W5 version, made entirely of AISI 316 steel, is
recommended for food, chemical, marine industry, etc.
code W1
(galvanized steel)
code W5
(AISI 316)
AB-03009001
AB-03009002
AB-03009003
AB-03009004
AB-03009005
AB-03009006
AB-03009007
AB-03009008
AB-03009009
AB-03009010
AB-03009011
AB-03009012
AB-03009013
AB-03009014
AB-03009015
AB-03009016
AB-03009017
AB-03009018
AB-03009019
AB-03009020
AB-03009021
AB-03009022
AB-03009023
AB-03009024
AB-03017720
AB-03017500
AB-03017519
AB-03017738
AB-03017527
AB-03017535
AB-03017543
AB-03017551
AB-03017560
AB-03017578
AB-03017586
AB-03017594
AB-03017607
AB-03017615
AB-03017623
AB-03017631
AB-03017640
AB-03017658
AB-03017666
AB-03017674
AB-03017682
AB-03017690
AB-03017703
AB-03017711
min / max
diameter range
[mm]
16 27
20 32
25 40
30 45
32 50
40 60
50 70
60 80
70 90
80 100
90 110
100 120
110 130
120 140
130 150
140 160
150 170
160 180
170 190
180 200
190 210
200 220
210 230
220 240
band thickness
[mm]
tightening torque*
[Nm]
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
0,8
4,2
5,2
5,2
5,2
6
6
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
6,8
max. medium
pressure*
[bar]
45
45
40
35
35
30
25
20
17
14
12
10
8
7
6
5
4
3
2
2
1,8
1,8
1,6
1,6
- depending on hose type and connection shape.
645

TORRO SPIRO
A worm drive hose clamp with 9 and 12 band width. S version is made
of carbon steel covered with aluminium and zinc alloy, W4 version
is made of AISI 304 steel.
A right hand hose clamp designed to mount spiral ventilation hoses of
P1, P2, P3 and P7 type whereas a left hand for hoses of Clip type (see
DUCTING AND VENTILATION HOSES section). Its unique design
(bridge) ensures tight connection and does not damage the hose.
D = 4 mm
D = 7.5 mm
code
S version
code
W4 version
VA-TSP-06094
VA-TSP-07094
VA-TSP-08094
VA-TSP-09094
VA-TSP-10094
VA-TSP-11094
VA-TSP-12094
VA-TSP-13094
VA-TSP-14094
VA-TSP-15094
VA-TSP-16094
VA-TSP-17094
VA-TSP-18094
VA-TSP-19094
VA-TSP-20094
VA-TSP-21094
VA-TSP-22094
VA-TSP-23094
VA-TSP-24094
VA-TSP-060127
VA-TSP-070127
VA-TSP-080127
VA-TSP-090127
VA-TSP-100127
VA-TSP-110127
VA-TSP-120127
VA-TSP-130127
VA-TSP-140127
VA-TSP-150127
VA-TSP-160127
VA-TSP-170127
VA-TSP-180127
VA-TSP-190127
VA-TSP-200127
VA-TSP-210127
VA-TSP-220127
VA-TSP-230127
VA-TSP-240127
VA-TSP-250127
VA-TSP-260127
VA-TSP-06094/W4
VA-TSP-07094/W4
VA-TSP-08094/W4
VA-TSP-09094/W4
VA-TSP-10094/W4
VA-TSP-11094/W4
VA-TSP-060127/W4
VA-TSP-070127/W4
VA-TSP-080127/W4
VA-TSP-090127/W4
VA-TSP-100127/W4
VA-TSP-110127/W4
VA-TSP-120127/W4
VA-TSP-130127/W4
VA-TSP-140127/W4
VA-TSP-150127/W4
VA-TSP-160127/W4
VA-TSP-170127/W4
VA-TSP-180127/W4
VA-TSP-190127/W4
-
min / max
diam. range
[mm]
40 60
50 70
60 80
70 90
80 100
90 110
100 120
110 130
120 140
130 150
140 160
150 170
160 180
170 190
180 200
190 210
200 220
210 230
220 240
40 60
50 70
60 80
70 90
80 100
90 110
100 120
110 130
120 140
130 150
140 160
150 170
160 180
170 190
180 200
190 210
200 220
210 230
220 240
230 250
240 260
band
width
[mm]
bridge
width D
[mm]
- for wire diameter of 1.0 1.5 mm

- for wire diameter of 1.6 3.0 mm
Two-part TORRO SPIRO hose clamps
designed for big bore hoses
code
S version
12
code
W4 version
min / max
diam. range
[mm]
VA-TSP2-320127 VA-TSP2-320127/W4
280320
VA-TSP2-370127 VA-TSP2-370127/W4
330370
VA-TSP2-420127 VA-TSP2-420127/W4
380420
VA-TSP2-470127 VA-TSP2-470127/W4
430470
VA-TSP2-520127 VA-TSP2-520127/W4
480520
band
width
[mm]
bridge
width D
[mm]
12
7,5
7,5
The tables above show the codes of right hand hose clamps. Code example of a left hand hose clamp: VA-TSL-11094.
A diameter range, band and bridge width are the same as those of right hand versions.
646

FLEX-GEAR 847 series
Band clamps with spring lock system maintaining constant clamping

force. Excellent choice for fluctuating and extreme temperature
applications. The rolled-up edges of the band protect the external layer
of the hose from damage and ensure even clamping force around the
hose. Tightening torque: 5.6 Nm (max. 9.6 Nm).
The clamp is made of stainless steel. Band width: 9/16.
code
minimum diameter
[mm]
maximum diameter
[mm]
SAE size
AB-847010
AB-847012
AB-847016
AB-847020
AB-847024
AB-847028
AB-847032
AB-847036
AB-847040
AB-847044
AB-847048
14
16
21
20
27
33
40
46
52
59
65
27
32
38
44
51
57
63
70
76
82
89
10
12
16
20
24
28
32
36
40
44
48
FLEX-GEAR HD 845 series
Band clamps with spring lock system maintaining constant clamping

force. Excellent choice for fluctuating and extreme temperature
applications. The rolled-up edges of the band protect the external layer
of the hose from damage and ensure even clamping force around the
hose. Tightening torque: 8.5 Nm (max. 14.1 Nm).
The clamp is made of stainless steel. Band width: 5/8.
code
minimum diameter
[mm]
maximum diameter
[mm]
SAE size
AB-845175
AB-845200
AB-845250
AB-845300
AB-845350
AB-845400
AB-845450
AB-845500
AB-845550
AB-845600
AB-845650
AB-845700
AB-845750
AB-845800
AB-845850
AB-845900
25
32
45
57
70
83
95
108
121
133
146
159
172
184
197
210
45
54
67
79
92
105
117
130
143
155
168
181
193
206
219
232
175
212
262
312
362
412
462
512
562
612
662
712
762
812
862
912
647

SUPRA HEAVY DUTY W2
A robust clamp with rolled-up band edges recommended for

reinforced, thick-wall industrial hoses. The hexagonal head design
of a screw allows tightening with such common tools as flat, tubular
or adjustable spanner.
Band and bridge made of AISI 430 steel, bolt and rollers of zincplated steel.
code
AB-03019012
AB-03019020
AB-03019039
AB-03019047
AB-03019055
AB-03019063
AB-03019071
AB-03019080
AB-03019098
AB-03019100
AB-03019119
AB-03019127
AB-03019135
AB-03019143
AB-03019151
AB-03019160
AB-03019178
AB-03019186
AB-03019194
AB-03019207
AB-03019215
AB-03019223
AB-03019231
AB-03019240
AB-03019258
AB-03019266
AB-03019274
AB-03019282
AB-03019290
AB-03019303
AB-03019311
AB-03019320
AB-03019338
AB-03019346
AB-03019354
AB-03019362
*
min / max
diameter range
[mm]
17 19
19 21
21 23
23 25
25 27
27 29
29 31
31 34
34 37
37 40
40 43
43 47
47 51
51 55
55 59
59 63
63 68
68 73
73 79
79 85
85 91
91 97
97 104
104 112
112 121
121 130
130 140
140 150
150 162
162 174
174 187
187 200
200 213
213 226
226 239
239 252
- depending on hose type and connection shape
648
band width
[mm]
bolt
size
max. tightening
torque*
[Nm]
max. medium
pressure*
[bar]
18
M6
10
45
12
40
16
36
20
M7
28
25
M8
30
20
12
28
M10
45

HDC W1, W5
A robust clamp with rolled-up band edges recommended for

reinforced, thick-wall industrial hoses. The hexagonal head of a
bolt allows tightening with such common tools as flat, tubular and
adjustable spanner.
W1 - all parts made of zinc-plated steel.
W5 - all parts made of AISI 316 steel.
code W1
code W5
AB-HDC-017/019-W1
AB-HDC-020/022-W1
AB-HDC-023/025-W1
AB-HDC-026/028-W1
AB-HDC-029/031-W1
AB-HDC-032/035-W1
AB-HDC-036/039-W1
AB-HDC-040/043-W1
AB-HDC-044/047-W1
AB-HDC-048/051-W1
AB-HDC-052/055-W1
AB-HDC-056/059-W1
AB-HDC-060/063-W1
AB-HDC-064/067-W1
AB-HDC-068/073-W1
AB-HDC-074/079-W1
AB-HDC-080/085-W1
AB-HDC-086/091-W1
AB-HDC-092/097-W1
AB-HDC-098/103-W1
AB-HDC-104/112-W1
AB-HDC-113/121-W1
AB-HDC-122/130-W1
AB-HDC-131/139-W1
AB-HDC-140/148-W1
AB-HDC-149/161-W1
AB-HDC-162/174-W1
AB-HDC-175/187-W1
AB-HDC-188/200-W1
AB-HDC-201/213-W1
AB-HDC-214/226-W1
AB-HDC-227/239-W1
AB-HDC-240/252-W1
AB-HDC-253/265-W1
AB-HDC-266/278-W1
AB-HDC-279/291-W1
AB-HDC-294/304-W1
AB-HDC-017/019-W5
AB-HDC-020/022-W5
AB-HDC-023/025-W5
AB-HDC-026/028-W5
AB-HDC-029/031-W5
AB-HDC-032/035-W5
AB-HDC-036/039-W5
AB-HDC-040/043-W5
AB-HDC-044/047-W5
AB-HDC-048/051-W5
AB-HDC-052/055-W5
AB-HDC-056/059-W5
AB-HDC-060/063-W5
AB-HDC-064/067-W5
AB-HDC-068/073-W5
AB-HDC-074/079-W5
AB-HDC-080/085-W5
AB-HDC-086/091-W5
AB-HDC-092/097-W5
AB-HDC-098/103-W5
AB-HDC-104/112-W5
AB-HDC-113/121-W5
AB-HDC-122/130-W5
AB-HDC-131/139-W5
AB-HDC-140/148-W5
AB-HDC-149/161-W5
AB-HDC-162/174-W5
AB-HDC-175/187-W5
AB-HDC-188/200-W5
AB-HDC-201/213-W5
AB-HDC-214/226-W5
AB-HDC-227/239-W5
AB-HDC-240/252-W5
AB-HDC-253/265-W5
AB-HDC-266/278-W5
AB-HDC-279/291-W5
AB-HDC-294/304-W5
min / max
diameter range
[mm]
17 19
20 22
23 25
26 28
29 31
32 35
36 39
40 43
44 47
48 51
52 55
56 59
60 63
64 67
68 73
74 79
80 85
86 91
92 97
98 103
104 112
113 121
122 130
131 139
140 148
149 161
162 174
175 187
188 200
201 213
214 226
227 239
240 252
253 265
266 278
279 291
294 304
thickness x band width

W1
W5
[mm]
[mm]
bolt
[mm]
0,618
0,618
M540
0,820
0,620
M650
1,222
0,822
M655
1,5x22
M870
1,524
0,824
M880
M1090
1,726
126
M10110
649

DPC W1, W5
A clamp with robust, double band. Two bolt guarantee accurate and
tight connection of a hose with its fitting.
W1 - all parts made of zinc-plated steel.
W5 - all parts made of AISI 316 steel.
code W1
code W5
AB-DPC-035/045-W1
AB-DPC-040/050-W1
AB-DPC-045/055-W1
AB-DPC-050/060-W1
AB-DPC-055/065-W1
AB-DPC-060/070-W1
AB-DPC-065/075-W1
AB-DPC-070/080-W1
AB-DPC-075/085-W1
AB-DPC-080/090-W1
AB-DPC-085/095-W1
AB-DPC-090/100-W1
AB-DPC-095/105-W1
AB-DPC-100/110-W1
AB-DPC-105/115-W1
AB-DPC-110/120-W1
AB-DPC-115/125-W1
AB-DPC-120/130-W1
AB-DPC-125/135-W1
AB-DPC-130/140-W1
AB-DPC-135/145-W1
AB-DPC-140/150-W1
AB-DPC-145/155-W1
AB-DPC-150/160-W1
AB-DPC-155/165-W1
AB-DPC-160/170-W1
AB-DPC-165/175-W1
AB-DPC-170/180-W1
AB-DPC-190/200-W1
AB-DPC-200/210-W1
AB-DPC-210/220-W1
AB-DPC-220/230-W1
AB-DPC-230/240-W1
AB-DPC-240/250-W1
AB-DPC-250/260-W1
AB-DPC-260/270-W1
AB-DPC-270/280-W1
AB-DPC-290/300-W1
AB-DPC-035/045-W5
AB-DPC-040/050-W5
AB-DPC-045/055-W5
AB-DPC-050/060-W5
AB-DPC-055/065-W5
AB-DPC-060/070-W5
AB-DPC-065/075-W5
AB-DPC-070/080-W5
AB-DPC-075/085-W5
AB-DPC-080/090-W5
AB-DPC-085/095-W5
AB-DPC-090/100-W5
AB-DPC-095/105-W5
AB-DPC-100/110-W5
AB-DPC-105/115-W5
AB-DPC-110/120-W5
AB-DPC-115/125-W5
AB-DPC-120/130-W5
AB-DPC-125/135-W5
AB-DPC-130/140-W5
AB-DPC-135/145-W5
AB-DPC-140/150-W5
AB-DPC-145/155-W5
AB-DPC-150/160-W5
AB-DPC-155/165-W5
AB-DPC-160/170-W5
AB-DPC-165/175-W5
AB-DPC-170/180-W5
AB-DPC-190/200-W5
AB-DPC-200/210-W5
AB-DPC-210/220-W5
AB-DPC-220/230-W5
AB-DPC-230/240-W5
AB-DPC-240/250-W5
AB-DPC-250/260-W5
AB-DPC-260/270-W5
AB-DPC-270/280-W5
AB-DPC-290/300-W5
650
min / max
diameter range
[mm]
35 45
40 50
45 55
50 60
55 65
60 70
65 75
70 80
75 85
80 90
85 95
90 100
95 105
100 110
105 115
110 120
115 125
120 130
125 135
130 140
135 145
140 150
145 155
150 160
155 165
160 170
165 175
170 180
190 200
200 210
210 220
220 230
230 240
240 250
250 260
260 270
270 280
290 300
thickness
x band width
[mm]
bolt
[mm]
1x20
W1 - M645
W5 - M650
1x24
M860

Malleable iron clamps
picture
code
hose
I.D.
[mm]
clamp
I.D.
[mm]
working
pressure
[bar]
MU-1352
13
17 22
16
description
Two-part hose clamp.

Material: zinc-plated malleable iron.
MU-1353
19
27 32
16
MU-1302
13
20 29
16
MU-1303
19
28 34
16
MU-1304
25
32 40
16
MU-1305
32
39 49
16
MU-1306
38
48 60
16
MU-1307
50
60 76
16
MU-1308
63
77 94
16
MU-1309
75
94 115
16
MU-1310
89
115 145
16
MU-1322
13
22 29
25
MU-1323
19
28 33
25
MU-1324
25
35 42
25
MU-1325
28
40 47
25
MU-1326
35
48 60
25
MU-1327
42
53 68
25
MU-1328
50
58 76
25
MU-1329
65
75 88
25
MU-1330
75
90 110
25
MU-1331
105
110 135
25
Two-part hose clamp according to DIN 20039 A.

Two-part hose clamp with

safety claws and separate
tongues according to DIN
20039 B.
Three-part hose clamp

with safety claws and
separate tongues according to DIN 20039B.
MU-1333
150
170 190
25
651

Safety clamps according to DIN 2817, DIN 2826
Material:
SS (AISI 316), Ms (brass-casting), Ms* (brass-forging), Al (aluminium-casting), Al* (aluminiumforging)

Working press.: 25 bar (DIN 2817), up to 100 bar (DIN 2826)
Safety clamp designed to assemble a hose on a fitting with a safety collar.

RS-636..., RS-637... (DIN 2817) clamps designed for standard fittings (smooth).
RS-635... (DIN 2826) clamps designed for high pressure and steam fittings (with serrated tail).
code
RS-636013005020
RS-636013005030
RS-636013005040
RS-635013005030
RS-635013006020
RS-635013006030
RS-635013007030
RS-636019006020
RS-636019006030
RS-636019006040
RS-635019006030
RS-635019007020
RS-635019007030
RS-636025006020
RS-636025006030
RS-636025006040
RS-635025007030
RS-635025008020
RS-635025008030
RS-636025008030
RS-636025008040
RS-635025009030
RS-636032006020
RS-636032006030
RS-636032006040
RS-635032006030
RS-636032008030
RS-636032008040
RS-635032008020
RS-635032008030
RS-636032010030
RS-636032010040
RS-635032010030
RS-636035006040
RS-636038007020
RS-636038007030
RS-636038007040
RS-636038008030
RS-636038008040
RS-635038008020
RS-635038008030
RS-636038010030
RS-636038010040
DN
[mm]
13 x 5
13 x 6
13 x 7
19 x 6
19 x 7
25 x 6
25 x 6,5
25 x 7,5
25 x 8
25 x 8,5
32 x 6
32 x 8
32 x 10
35 x 6
38 x 6,5
38 x 8
38 x 10
RS-635038010030
RS-636040007030
RS-636040007040
RS-636040010030
RS-636040010040
RS-636045007040
652
D
min-max material
[mm]
SS
Ms*
2224
Al*
Ms*
SS
2426
Ms*
2628
Ms*
SS
Ms*
3033
Al*
Ms*
SS
3234
Ms*
SS
3639
Ms*
Al*
3739
Ms*
SS
3941
Ms*
Ms
4043
Al*
4143
Ms*
SS
Ms*
4346
Al*
Ms*
Ms
Al*
4750
SS
Ms*
Ms
5053
Al
Ms
4750
Al*
SS
5052
Ms*
Al*
Ms
Al*
5356
SS
Ms*
Ms
Al*
5760
Ms*
40 x 7
5356
40 x 10
5861
45 x 7
5861
Ms
Al*
Ms
Al*
Al*
dimensions [mm]
H
56
59
50
bolts
4x
M6x20
54
57
65
65
68
50
4x
M6x20
67
70
70
73
65
4x
M8x25
73
75
50
4x
M6x20
76
79
80
83
65
4x
M8x25
76
79
50
4x
M6x20
80
83
65
4 xM8x25
75
77
50
4x
M6x20
86
89
77
4 xM8x25
83
85
50
4x
M6x20
88
90
77
4x
M8x25
84
86
50
4x
M6x20
95
83
97
85
77
50
4 xM8x25
4 xM6x20
83
85
50
4x
M6x20
85
87
102
107
90
4x
M10x40
90
92
50
4x
M6x20
106
111
90
4x
M10x40
85
87
50
92
94
4x
M6x20
98
101
57
4 xM8x25
weight
[kg]
0,25
0,27
0,11
0,37
0,32
0,34
0,31
0,31
0,31
0,13
0,54
0,50
0,56
0,33
0,33
0,14
0,55
0,63
0,68
0,38
0,14
0,65
0,35
0,41
0,15
0,87
0,41
0,15
0,72
0,78
0,49
0,17
0,83
0,15
0,38
0,43
0,16
0,50
0,18
1,30
1,40
0,50
0,18
1,55
0,50
0,18
0,52
0,19
0,30

Safety clamps according to DIN 2817, DIN 2826
code
DN
[mm]
D
min-max material
[mm]
RS-636050008020
RS-636050008030
6467
MS*
Al*
RS-635050009020
SS
50 x 9
6769
RS-636050010030
RS-636050010040
50 x 10
6971
50 x 12
7376
RS-636065007020
RS-636065007030
Ms*
Ms*
RS-635050010030
RS-635050012030
65 x 7
7882
65 x 10
8487
128
132
118
121
Ms*
Al*
65 x 12
8891
Ms
75 x 8
8993
Ms*
RS-636075010030
Ms
75 x 10
9497
RS-635075010030
RS-636075012030
75 x 12
98101
RS-635075012030
RS-636080010030
RS-636080010040
75 x 14
80 x 8
80 x 10
102105
9497
99102
RS-637100008020
RS-637100008030
4x
M8x25
Al*
114119
124
126
141
143
131
133
57
4x
M8x25
0,81
100
4x
M10x40
1,75
1,70
0,31
2,40
4x
M8x25
1,20
0,40
1,30
0,45
102
4 x M10x40
2,90
2,40
1,15
77
138
4x
M8x25
140
150
Ms
148
150
Al*
141
142
Ms
148
150
Ms
155
157
138
140
Ms
148
150
Al*
141
142
164
167
Ms*
0,27
1,65
1,25
0,49
1,40
0,53
115
4x
M10x40
77
4x
M8x25
1,85
115
4x
M10x40
2,85
77
4x
M8x25
3,30
0,52
3,90
1,40
0,47
0,80
0,51
SS
100 x 8
0,71
4x
M10x40
75
148
Al*
0,65
1,05
Ms
Ms
weight
[kg]
100
SS
Al*
RS-636080008040
117
Ms
RS-636075008040
RS-636080008030
113
121
Ms
RS-636075008020
RS-635075014030
57
bolts
SS
RS-635065010030
RS-636075012040
106
116
Ms*
RS-636075010040
103
Ms*
RS-636065010030
RS-636075008030
110
Al*
RS-635065012030
107
Al*
RS-636065007040
RS-636065010040
SS
50 x 8
RS-636050008040
RS-635050009030
dimensions [mm]
3,00
3,40
RS-637100008040
Al*
RS-637100010030
Ms
185
187
Al*
167
169
Ms
185
187
Al*
174
176
Ms
185
187
4,80
Al*
180
182
1,35
185
187
RS-637100010040
RS-637100012030
RS-637100012040
RS-637100014030
RS-637100014040
RS-637100016030
RS-637100016040
RS-637125010030
RS-637125010040
RS-637125013030
RS-637125013040
RS-637125015030
100 x 10
118122
100 x 12 122126
100 x 14 126130
100 x 16 130134
125 x 10 143148
125 x13
149154
Ms
Al*
1,19
Ms
211
214
Al*
190
192
Ms
Al
Ms
211
214
218
224
125 x15
153158
RS-637150010040
150 x10
168174
Al*
231
235
RS-637150013040
150 x13
174180
Al*
233
237
RS-637150015040
150 x15
178184
Al*
244
248
RS-637200012040
200 x12
222229
Al*
288
291
RS-637200016040
200 x16
230239
Al*
294
298
RS-637125015040
Al
5,60
120
4x
M10x40
1,15
5,00
1,40
3,75
1,40
6x
M12x50
6x
M10x50
145
8,20
1,40
7,25
6x
M12x50
2,65
8,10
2,85
182
6x
M12x50
243
8x
M12x60
3,75
3,30
3,70
6,50
6,75
653

Crimping ferrules for industrial hoses - L type
L type ferrules are used to assemble hydraulic type fittings (the same type as Z type high-pressure fittings) on
industrial hoses (both rubber and plastic with textile reinforcement or reinforcing spiral suction-delivery hoses).
In order to select an appropriate ferrule, hose outside and inside diameter must be taken into account. The length
of the ferrule L must not exceed the length of the fittings hose tail. Ferrules made of AISI 316 available on request.
hydraulic type fitting
ferrule - L type
code
(galvanized steel)
code
(AISI 304)
TI-L-15-04
TI-L-15-05
TI-L-17-05
TI-L-19-05
TI-L-16-06
TI-L-18-06
TI-L-19-06
TI-L-20-06
TI-L-24-06
TI-L-22-08
TI-L-24-08
TI-L-26-08
TI-L-28-08
TI-L-25-10
TI-L-28-10
TI-L-30-10
TI-L-30-12
TI-L-33-12
TI-L-37-16
TI-L-39-16
TI-L-41-16
TI-L-45-20
TI-L-48-20
TI-L-50-20
TI-L-53-20
TI-L-52-24
TI-L-56-24
TI-L-58-24
TI-L-64-32
TI-L-67-32
TI-L-70-32
TI-L-82-40
TI-L-96-48
TI-L-15-04SS
TI-L-15-05SS
TI-L-17-05SS
TI-L-19-05SS
TI-L-16-06SS
TI-L-18-06SS
TI-L-19-06SS
TI-L-20-06SS
TI-L-24-06SS
TI-L-22-08SS
TI-L-24-08SS
TI-L-26-08SS
TI-L-28-08SS
TI-L-25-10SS
TI-L-28-10SS
TI-L-30-10SS
TI-L-30-12SS
TI-L-33-12SS
TI-L-37-16SS
TI-L-39-16SS
TI-L-41-16SS
TI-L-45-20SS
TI-L-48-20SS
TI-L-50-20SS
TI-L-53-20SS
TI-L-52-24SS
TI-L-56-24SS
TI-L-58-24SS
TI-L-64-32SS
TI-L-67-32SS
TI-L-70-32SS
TI-L-82-40SS
TI-L-96-48SS
hose I.D.
[inch]
[mm]
1/4
5/16
3/8
10
1/2
12 13
5/8
16
3/4
19 20
25
1.1/4
32
1.1/2
38 40
50 51
2.1/2
3
63 65
75 80
rubber or plastic hose
D1
[mm]
D2
[mm]
D3
[mm]
19
19
21
23
20
22
23
24
28,4
27
29,5
30
33
30
33
35
36
39
43
45
47
52
55
57
62
59
63
65
73
76
76,1
89,8
106,4
15
15
17
19
16
18
19
20
24
21,5
24
25,5
28
25
28
30
30
33
37
39
41
45
48
50
53
52
56
58
64
67
69,8
82
96
11,6
13,2
14,8
18,6
21,4
24,8
31
L
[mm]
30
32
34
36,5
40
50
51,5
58
38,2
60
44,8
64
57
70
71
88
92
Example:
Hose for water IV-PATOS-13 with inside diameter Dw = 13 mm,
outside diameter Dz = 23 mm, fittings TI-ZBW110-08-08, crimping
ferrule TI-L-24-08. Crimped in accordance with IT-14.
Attention!
To crimp rubber and plastic hoses with textile reinforcement, properly
selected ferrules for high-pressure thermoplastic hoses can also be
used (ZC-..., MC-...).
654

Crimping ferrules for industrial hoses - LDR, LD, LR types
LDR, LD, LR type ferrules designed to crimp stainless steel hygienic fittings (with serrated hose tail) of NH-..K-...
type and hose fittings with tails for safety clamps - RS, e.g. TW-KRS-..., NH-..R-... on industrial hoses (rubber and
plastic with textile reinforcement, optionally with steel wire reinforcement - suction-delivery hoses). Inside Dw and
outside Dz hose diameter must be taken into account when selecting the ferrule. The length of the ferrule L can
be slightly (several mm) longer than the length of the fittings hose tail Lk. LR ferrules - only for fittings for safety
clamps, LD - only for NH-..., K-... type fittings. Ferrules made of AISI 316 steel available on request.
fitting for safety
clamp assembly
LDR, LR, LD
type ferrule
NH-... K-...
type fitting
code
(galvanized steel)
code
(AISI 304)
TI-LR-037-16
TI-LD-040-16
TI-LDR-045-20
TI-LDR-048-20
TI-LDR-056-24
TI-LDR-064-32
TI-LDR-068-32
TI-LDR-071-32
TI-LDR-073-32
TI-LDR-078-40
TI-LDR-082-40
TI-LDR-085-40
TI-LDR-092-40
TI-LDR-092-48
TI-LDR-095-48
TI-LDR-098-48
TI-LDR-114-48
TI-LR-120-64
TI-LR-123-64
TI-LD-024-08SS
TI-LD-030-12SS
TI-LD-037-16SS
TI-LR-037-16SS
TI-LD-040-16SS
TI-LDR-045-20SS
TI-LDR-048-20SS
TI-LDR-056-24SS
TI-LDR-064-32SS
TI-LDR-068-32SS
TI-LDR-071-32SS
TI-LDR-073-32SS
TI-LDR-078-40SS
TI-LDR-082-40SS
TI-LDR-085-40SS
TI-LDR-092-40SS
TI-LDR-092-48SS
TI-LDR-095-48SS
TI-LDR-098-48SS
TI-LDR-114-48SS
TI-LD-119-64SS
TI-LR-120-64SS
TI-LD-123-64SS
TI-LR-123-64SS
hose I.D.
[inch]
1/2
3/4
[mm]
1213
1920
25
1.1/4
32
1.1/2
3840
5051
2.1/2
6365
7580
100102
rubber or plastic hose
D1
[mm]
D2
[mm]
D3
[mm]
L
[mm]
29,5
36
43
44
46
52
55
63,6
72
76
79
81
86
90
93
100
100
103
106
123
127
128
24
30
40
45
48
56
64
68
71
73
78
82
85
92
92
95
98
114
119
120
20
25
32
33
32
26
33
33,5
47
33,5
40
47
45,2
47
59
54
74
68
86
72
131
123
111
73,5
105
73,5
105
37
Example:
A hose for foodstuffs BLUE FOOD FLEXWING (Dw = 63 mm, Dz
= 78 mm), fitting NH-DWK-065 with nut NH-DN-065, crimped with
ferrule TI-LDR-082-40SS.
655

Internal crimping system
Internal crimping allows permanent and safe fitting-hose connection ensuring full and unrestricted flow through the
fitting of a flexible hose assembly. The fitting is internally expanded by pulling a hardened tool of the same size as
the hose bore, called a dolly or a plug, down the inside of a hose tail. The compressive force exerted on the hose
wall by the hose tail causes the hose material to flow into the serrated cavities of both hose tail and ferrule. As
a result, a permanently attached, secure mechanical bond is achieved. The whole process is the opposite to the
traditional external crimping.
The main advantage of internal crimping over external crimping is the increase in a flow rate, because:
- when externally crimped, the hose tail of a fitting (inserted into the hose) limits the flow diameter by the thickness
of its wall;
- when internally crimped, the wall of the hose tail is entirely pushed into the hose, the inside diameters of both
the hose and its fitting are the same Dw = Dk).
Example for DN76 (3) hose, when flow rate amounts to w = 4 m/s.
x
Dk
[mm]
area S
[cm2]
flow rate Q
[l/min]
external crimping
internal crimping
gain (external / internal)
70,5
76,0
+ 7,8%
39,0
45,3
+ 16%
936
1088
+ 16%
The bigger the flow rate, the shorter the reloading time - that makes the internal crimping method cost-effective.
Another advantage is the lack of obstacles and no turbulence at the end of a hose tail which is crucial for the
transfer of dry and loose or semi-fluid products (granules, grain, cement, concrete, etc.). The method can be used
for the majority of rubber industrial hoses from 2 (DN50) to 12 (DN300). It is particularly recommended for water
and air hoses, fuels and other petrochemical products, delivery hoses for dry media, and for foodstuffs.
Fitting and ferrule selection
Internal crimping requires special fittings and ferrules (TM type). The ferrule is selected according to hose Dw
and its Dz (see picture below). Assemble in accordance with IT-86 manual. The maximum working pressure for
internally crimped fittings is 30 bar for 2 to 6 fittings, 20 bar for 8 and bigger fittings. Maximum working pressure
of the complete flexible hose assembly is limited by the working pressure of hose connections (e.g. PN 16 flange)
and by working pressure of the hose.
TM-... fitting
656
TM-... type ferrule
rubber
industrial hose

HOOKIE HOOK
Special hooks allow to lift reloading hoses. Widely used in marine
reloading systems to facilitate handling of hoses between oil rigs and
supply vessels, in shipyards, etc. As a standard used with floating
hoses. Made of forged carbon steel and mounted with clamps on a
special type of fittings with swivel option.
code
hose DN
[inch]
working load
[T]
weight
[kg]
description
TM- HH1-075
TM- HH1-100
TM- HH1-125
3
4
5
4
4
4
9
7,8
6
Complete Hookie Hook hose lifter with retaining clamp. Total width 460 mm.
RUBBER P-CLIP
RUBBER P-CLIP clamp designed for secure and vibration-damping
suspension of pipes, cables, hoses, etc. It consists of a bent steel clip
and a rubber flange profile. The rubber profile dampens mechanical
impact and vibrations as well as protects cables and hoses against
damage. The clip is made of galvanized carbon steel, the profile of
EPDM rubber resistant to water, abrasion, temperature changes
and ageing.
code W1
(galvanized steel)
diameter
[mm]
band width
[mm]
bore size
[mm]
code W4
(AISI 304)
diameter
[mm]
band width
[mm]
bore size
[mm]
AB-03003856
AB-03003864
AB-03003880
AB-03003901
AB-03003928
AB-03003936
AB-03003944
AB-03003952
AB-03003960
AB-03003979
AB-03003987
AB-03003995
AB-03004007
AB-03004015
AB-03004023
AB-03004031
AB-03004040
AB-03004058
AB-03004066
AB-03004074
AB-03004082
AB-03004904
AB-03004920
AB-03004947
AB-03004955
AB-03004971
AB-03004980
AB-03005000
5
6
8
10
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
30
32
34
35
37
38
40
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
15
15
15
15
15
15
15
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
5,3
6,4
6,4
6,4
6,4
6,4
6,4
6,4
AB-43003883
AB-43004667
AB-43004704
AB-43004739
AB-43004755
AB-43004771
AB-43004780
AB-43004798
AB-43004827
AB-43004878
AB-43004886
AB-43004931
AB-43004958
AB-43005141
AB-43005563
AB-43005619
AB-43005790
AB-43006160
8
6
10
13
15
17
18
19
22
27
28
33
35
54
16
22
40
77
12
15
15
15
15
15
15
15
15
15
15
15
15
15
20
20
20
20
5,3
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
6,4
8,4
8,4
8,4
8,4
658

DIN 3015 clamps
Designed for quick, easy, durable and esthetic assembly of pipes, cables and hoses in several branches of industry,
including land and marine installations. Manufactured according to DIN 3015 specifications. Mounted on a base
construction by welding the lower plate, screwing or fixing it on rails.
Supplied in 3 versions:
STANDARD
Type 100
HEAVY DUTY
Type 101
DOUBLE
Type 201
Type 301
Clamp material (clamp body):

material
symbol
colour
working temp.
polypropylene
PP
green
from -30C to +90C
polyamide PA66 with addition of 20%

glass fibre - self extinguishing
PA
black
from -40C to +180C
rubber
RB
black
from -40C to +80C
aluminium
AL
silver
up to +350C
The surface of the inner part of a clamp is grooved as a standard. Clamps with smooth surface of the inner part
are also available. Joining parts (screws, plates) are made of zinc-plated carbon steel, weld parts of carbon steel.
Clamps with parts made of stainless steel are available on request.
To order separated clamp body, please add X to the code (e.g. TC-PP100-006X).
To obtain detailed information about physical, mechanical, thermal and electrical properties of a particular material,
please contact Technical Department of TUBES INTERNATIONAL.
Clamps mounted on a base construction and other elements of the system
Clamps are mounted on a base construction by welding the lower plate followed by the assembly of a clamp and
pipe. The clamps with already mounted body must not be welded! Keep proper distance between subsequent
clamps. If a pipe is bent, assemble clamps as close as possible to the pipe bend. After tightening screws (with an
appropriate torque) of clamp on the pipe, two halves of clamps should not be in contact with each other.
Optional system elements for assembly by welding or screwing, e.g.:

- extended, angular and bridge plates,
- double and multiple mounting plates,
- rails for multiple mounting,
- units for stack mounting (one onto the other).
For a detailed clamps offer, contact Sales or Technical Department of TUBES INTERNATIONAL.
659

DIN 3015 standard clamp
100 type
Clamp material: Green polypropylene (also: selfextinguishing polyamide, aluminium,

rubber)
Bolts material: Galvanized steel
Base material: Carbon steel
0 group
Designed for quick, easy, durable and esthetic assembly

of pipes, cables and hoses. Apart from standard metal
parts, extended plates, rails and bolts for clamp sets
are available as well. For proper selection of elements,
contact Sales or Technical Department of TUBES
INTERNATIONAL.
16 group
pipe
O.D.
[mm]
code
(polypropylene)
code
(polyamide)
code
(rubber)
code
(aluminium)
TC-PP100-006
TC-PA100-006
TC-PP100-008
TC-PA100-008
TC-PP100-010
TC-PA100-010
TC-PP100-012
TC-PA100-012
TC-PP100-106
TC-PA100-106
TC-RB100-106
TC-AL100-106
TC-PP100-106,4
TC-PA100-106,4
TC-RB100-106,4
6,4
group
30
28
27
32
M6 x 20
30
34
20
27
42
M6 x 20
30
40
26
33
48
M6 x 25
30
48
33
35
55
M6 x 30
30
57
40
42
62
M6 x 35
30
68
52
58
74
M6 x 50
30
86
66
66
88
M6 x 60
6
0
8
10
12
TC-PP100-108
TC-PA100-108
TC-RB100-108
TC-AL100-108
TC-PP100-109,5
TC-PA100-109,5
TC-RB100-109,5
TC-PP100-110
TC-PA100-110
TC-RB100-110
TC-AL100-110
TC-PP100-112
TC-PA100-112
TC-RB100-112
TC-AL100-112
12
TC-PP100-212,7
TC-PA100-212,7
TC-RB100-212,7
12,7
TC-PP100-213,5
TC-PA100-213,5
TC-RB100-213,5
13,5
TC-PP100-214
TC-PA100-214
TC-RB100-214
TC-AL100-214
14
TC-PP100-215
TC-PA100-215
TC-RB100-215
TC-AL100-215
TC-PP100-216
TC-PA100-216
TC-RB100-216
TC-AL100-216
TC-PP100-217,2
TC-PA100-217,2
TC-RB100-217,2
TC-AL100-217,2
17,2
TC-PP100-218
TC-PA100-218
TC-RB100-218
TC-AL100-218
18
TC-PP100-219
TC-PA100-219
TC-RB100-219
19
TC-PP100-319
TC-PA100-319
TC-RB100-319
TC-AL100-319
19
TC-PP100-320
TC-PA100-320
TC-RB100-320
TC-AL100-320
20
TC-PP100-321,3
TC-PA100-321,3
TC-RB100-321,3
TC-AL100-321,3
TC-PP100-322
TC-PA100-322
TC-RB100-322
TC-AL100-322
8
9,5
10
15
16
21,3
22
TC-PP100-325
TC-PA100-325
TC-RB100-325
TC-AL100-325
25
TC-PP100-325,4
TC-PA100-325,4
TC-RB100-325,4
25,4
TC-PP100-426,9
TC-PA100-426,9
TC-RB100-426,9
TC-AL100-426,9
26,9
TC-PP100-428
TC-PA100-428
TC-RB100-428
TC-AL100-428
TC-PP100-430
TC-PA100-430
TC-RB100-430
TC-AL100-430
TC-PP100-432
TC-PA100-432
TC-RB100-432
TC-AL100-432
TC-PP100-532
TC-PA100-532
TC-RB100-532
TC-AL100-532
32
TC-PP100-533,7
TC-PA100-533,7
TC-RB100-533,7
TC-AL100-533,7
33,7
TC-PP100-535
TC-PA100-535
TC-RB100-535
TC-AL100-535
35
TC-PP100-538
TC-PA100-538
TC-RB100-538
TC-AL100-538
TC-PP100-540
TC-PA100-540
TC-RB100-540
TC-AL100-540
28
30
32
38
40
TC-PP100-542
TC-PA100-542
TC-RB100-542
TC-AL100-542
42
TC-PP100-542,4
TC-PA100-542,4
TC-RB100-542,4
42,4
TC-PP100-545
TC-PA100-545
TC-RB100-545
TC-AL100-545
45
TC-PP100-644,5
TC-PA100-644,5
TC-RB100-644,5
TC-AL100-644,5
44,5
TC-PP100-648,3
TC-PA100-648,3
TC-RB100-648,3
TC-AL100-648,3
TC-PP100-650,8
TC-PA100-650,8
TC-RB100-650,8
TC-AL100-650,8
660
dimensions
48,3
50,8

DIN 3015 standard clamp
101 type

rubber)
Plate material: Galvanized steel
0 group

INTERNATIONAL.
16 group
pipe
O.D.
[mm]
code
(polypropylene)
code
(polyamide)
code
(rubber)
code
(aluminium)
TC-PP101-006
TC-PA101-006
TC-PP101-008
TC-PA101-008
TC-PP101-010
TC-PA101-010
TC-PP101-012
TC-PA101-012
TC-PP101-106
TC-PA101-106
TC-RB101-106
TC-AL101-106
TC-PP101-106,4
TC-PA101-106,4
TC-RB101-106,4
6,4
group
dimensions
a
30
28
27
32
M6 x 30
30
34
20
27
42
M6 x 30
30
40
26
33
48
M6 x 35
30
48
33
35
55
M6 x 40
30
57
40
42
62
M6 x 45
30
68
52
58
74
M6 x 60
30
86
66
66
88
M6 x 70
6
0
8
10
12
TC-PP101-108
TC-PA101-108
TC-RB101-108
TC-AL101-108
TC-PP101-109,5
TC-PA101-109,5
TC-RB101-109,5
TC-PP101-110
TC-PA101-110
TC-RB101-110
TC-AL101-110
TC-PP101-112
TC-PA101-112
TC-RB101-112
TC-AL101-112
12
TC-PP101-212,7
TC-PA101-212,7
TC-RB101-212,7
12,7
TC-PP101-213,5
TC-PA101-213,5
TC-RB101-213,5
13,5
TC-PP101-214
TC-PA101-214
TC-RB101-214
TC-AL101-214
14
TC-PP101-215
TC-PA101-215
TC-RB101-215
TC-AL101-215
TC-PP101-216
TC-PA101-216
TC-RB101-216
TC-AL101-216
TC-PP101-217,2
TC-PA101-217,2
TC-RB101-217,2
TC-AL101-217,2
17,2
TC-PP101-218
TC-PA101-218
TC-RB101-218
TC-AL101-218
18
TC-PP101-219
TC-PA101-219
TC-RB101-219
19
TC-PP101-319
TC-PA101-319
TC-RB101-319
TC-AL101-319
19
TC-PP101-320
TC-PA101-320
TC-RB101-320
TC-AL101-320
20
TC-PP101-321,3
TC-PA101-321,3
TC-RB101-321,3
TC-AL101-321,3
TC-PP101-322
TC-PA101-322
TC-RB101-322
TC-AL101-322
8
9,5
10
15
16
21,3
22
TC-PP101-325
TC-PA101-325
TC-RB101-325
TC-AL101-325
25
TC-PP101-325,4
TC-PA101-325,4
TC-RB101-325,4
25,4
TC-PP101-426,9
TC-PA101-426,9
TC-RB101-426,9
TC-AL101-426,9
26,9
TC-PP101-428
TC-PA101-428
TC-RB101-428
TC-AL101-428
TC-PP101-430
TC-PA101-430
TC-RB101-430
TC-AL101-430
TC-PP101-432
TC-PA101-432
TC-RB101-432
TC-AL101-432
TC-PP101-532
TC-PA101-532
TC-RB101-532
TC-AL101-532
32
TC-PP101-533,7
TC-PA101-533,7
TC-RB101-533,7
TC-AL101-533,7
33,7
TC-PP101-535
TC-PA101-535
TC-RB101-535
TC-AL101-535
35
TC-PP101-538
TC-PA101-538
TC-RB101-538
TC-AL101-538
TC-PP101-540
TC-PA101-540
TC-RB101-540
TC-AL101-540
28
30
32
38
40
TC-PP101-542
TC-PA101-542
TC-RB101-542
TC-AL101-542
42
TC-PP101-542,4
TC-PA101-542,4
TC-RB101-542,4
42,4
TC-PP101-545
TC-PA101-545
TC-RB101-545
TC-AL101-545
45
TC-PP101-644,5
TC-PA101-644,5
TC-RB101-644,5
TC-AL101-644,5
44,5
TC-PP101-648,3
TC-PA101-648,3
TC-RB101-648,3
TC-AL101-648,3
TC-PP101-650,8
TC-PA101-650,8
TC-RB101-650,8
TC-AL101-650,8
48,3
50,8
661

DIN 3015 heavy duty clamp
201 type

rubber)
INTERNATIONAL.
pipe
O.D.
[mm]
code
(polypropylene)
code
(polyamide)
code
(rubber)
code
(aluminium)
TC-PP201-106
TC-PA201-106
TC-RB201-106
TC-AL201-106
TC-PP201-106,4
TC-PA201-106,4
TC-RB201-106,4
TC-AL201-106,4
6,4
TC-PP201-108
TC-PA201-108
TC-RB201-108
TC-AL201-108
TC-PP201-109,5
TC-PA201-109,5
TC-RB201-109,5
9,5
TC-PP201-110
TC-PA201-110
TC-RB201-110
TC-AL201-110
10
TC-PP201-112
TC-PA201-112
TC-RB201-112
TC-AL201-112
TC-PP201-112,7
TC-PA201-112,7
TC-RB201-112,7
TC-AL201-112,7
TC-PP201-113,5
TC-PA201-113,5
TC-RB201-113,5
13,5
TC-PP201-114
TC-PA201-114
TC-RB201-114
TC-AL201-114
14
TC-PP201-115
TC-PA201-115
TC-RB201-115
TC-AL201-115
15
TC-PP201-116
TC-PA201-116
TC-RB201-116
TC-AL201-116
16
TC-PP201-117,2
TC-PA201-117,2
TC-RB201-117,2
TC-AL201-117,2
17,2
group
30
55
33
32
73
M10 x 45
30
70
45
48
85
M10 x 60
30
85
60
60
100
M10 x 70
45
120
90
90
140
10
M12 x 100
12
1
12,7
TC-PP201-118
TC-PA201-118
TC-RB201-118
TC-AL201-118
18
TC-PP201-219
TC-PA201-219
TC-RB201-219
TC-AL201-219
19
TC-PP201-220
TC-PA201-220
TC-RB201-220
TC-AL201-220
20
TC-PP201-221,3
TC-PA201-221,3
TC-RB201-221,3
TC-AL201-221,3
21,3
TC-PP201-222
TC-PA201-222
TC-RB201-222
TC-AL201-222
22
TC-PP201-225
TC-PA201-225
TC-RB201-225
TC-AL201-225
TC-PP201-225,4
TC-PA201-225,4
TC-RB201-225,4
25,4
TC-PP201-226,9
TC-PA201-226,9
TC-RB201-226,9
TC-AL201-226,9
26,9
TC-PP201-228
TC-PA201-228
TC-RB201-228
TC-AL201-228
28
TC-PP201-230
TC-PA201-230
TC-RB201-230
TC-AL201-230
30
TC-PP201-330
TC-PA201-330
TC-RB201-330
TC-AL201-330
30
TC-PP201-332
TC-PA201-332
TC-RB201-332
TC-AL201-332
32
TC-PP201-333,7
TC-PA201-333,7
TC-RB201-333,7
TC-AL201-333,7
33,7
TC-PP201-335
TC-PA201-335
TC-RB201-335
TC-AL201-335
TC-PP201-338
TC-PA201-338
TC-RB201-338
TC-AL201-338
TC-PP201-340
TC-PA201-340
TC-RB201-340
TC-AL201-340
TC-PP201-342
TC-PA201-342
TC-RB201-342
TC-AL201-342
42
TC-PP201-342,4
TC-PA201-342,4
TC-RB201-342,4
TC-AL201-342,4
42,4
TC-PP201-438
TC-PA201-438
TC-RB201-438
TC-AL201-438
38
TC-PP201-442
TC-PA201-442
TC-RB201-442
TC-PP201-442,4
TC-PA201-442,4
TC-RB201-442,4
TC-AL201-442,4
TC-PP201-444,5
TC-PA201-444,5
TC-RB201-444,5
TC-AL201-444,5
44,5
TC-PP201-448,3
TC-PA201-448,3
TC-RB201-448,3
TC-AL201-448,3
48,3
662
dimensions
25
35
38
40
42
4
42,4

DIN 3015 heavy duty clamp
201 type

rubber)
INTERNATIONAL.
pipe
O.D.
[mm]
code
(polypropylene)
code
(polyamide)
code
(rubber)
code
(aluminium)
TC-PP201-450
TC-PA201-450
TC-RB201-450
TC-AL201-450
50
TC-PP201-450,8
TC-PA201-450,8
TC-RB201-450,8
50,8
TC-PP201-455
TC-PA201-455
TC-RB201-455
TC-AL201-455
55
TC-PP201-457
TC-PA201-457
TC-RB201-457
TC-AL201-457
TC-PP201-460,3
TC-PA201-460,3
TC-RB201-460,3
TC-AL201-460,3
TC-PP201-463,5
TC-PA201-463,5
TC-RB201-463,5
TC-AL201-463,5
63,5
TC-PP201-465
TC-PA201-465
TC-RB201-465
TC-AL201-465
65
TC-PP201-470
TC-PA201-470
TC-RB201-470
TC-AL201-470
70
TC-PP201-565
TC-PA201-565
TC-RB201-565
TC-AL201-565
65
TC-PP201-570
TC-PA201-570
TC-RB201-570
TC-AL201-570
70
TC-PP201-575
TC-PA201-575
TC-RB201-575
TC-AL201-575
TC-PP201-576,1
TC-PA201-576,1
TC-RB201-576,1
TC-AL201-576,1
TC-PP201-580
TC-PA201-580
TC-RB201-580
TC-AL201-580
TC-PP201-582,5
TC-PA201-582,5
TC-RB201-582,5
TC-AL201-582,5
80
TC-PP201-588,9
TC-PA201-588,9
TC-RB201-588,9
TC-AL201-588,9
88,9
TC-PP201-688,9
TC-PA201-688,9
TC-RB201-688,9
88,9
TC-PP201-6100
TC-PA201-6100
TC-RB201-6100
100
TC-PP201-6101,6 TC-PA201-6101,6 TC-RB201-6101,6

TC-PP201-6108
TC-PA201-6108
TC-RB201-6108
TC-PP201-6114,3 TC-PA201-6114,3 TC-RB201-6114,3
group
76,1
108
114,3
TC-PA201-6127
TC-RB201-6127
127
TC-PA201-6133
TC-RB201-6133
133
TC-PP201-7133
TC-PA201-7133
TC-RB201-7133
133
TC-PP201-7139,7 TC-PA201-7139,7 TC-RB201-7139,7
139,7
TC-PP201-7152,4 TC-PA201-7152,4 TC-RB201-7152,4
TC-RB201-7165
45
120
90
90
140
10
M12 x 100
60
152
122
120
180
10
M16 x 130
80
205
168
170
225
15
M20 x 190
90
250
205
200
270
15
M24 x 220
120
320
265
270
340
25
M30 x 300
160
470
395
410
520
30
M30 x 450
101,6
6
TC-PP201-6133
TC-PA201-7165
80
TC-PP201-6127
TC-PP201-7165
75
5
57
60,3
dimensions
152,4
165
TC-PP201-7168,3 TC-PA201-7168,3 TC-RB201-7168,3
168,3
TC-PP201-8168,3
168,3
TC-PP201-8177,8
TC-PP201-8193,7
TC-PP201-8216
216
177,8
8
193,7
TC-PP201-8219,1
219,1
TC-PP201-9219,1
219,1
TC-PP201-9244,5
TC-PP201-9273
TC-PP201-9323,9
244,5
273
323,9
663

DIN 3015 double clamp
301 type
Clamp material: Green polypropylene (also: selfextinguishing polyamide, rubber)

INTERNATIONAL.
pipe
O.D.
[mm]
code
(polypropylene)
code
(polyamide)
code
(rubber)
code
(aluminium)
TC-PP301-106
TC-PA301-106
TC-RB301-106
6x6
TC-PP301-106,4
TC-PA301-106,4
TC-RB301-106,4
6,4 x 6,4
TC-PP301-108
TC-PA301-108
TC-RB301-108
TC-PP301-109,5
TC-PA301-109,5
TC-RB301-109,5
TC-PP301-110
TC-PA301-110
TC-RB301-110
TC-PP301-112
TC-PA301-112
TC-RB301-112
12 x 12
TC-PP301-212,7
TC-PA301-212,7
TC-RB301-212,7
12,7 x 12,7
TC-PP301-213,5
TC-PA301-213,5
TC-RB301-213,5
13,5 x 13,5
TC-PP301-214
TC-PA301-214
TC-RB301-214
TC-PP301-215
TC-PA301-215
TC-RB301-215
TC-PP301-216
TC-PA301-216
TC-RB301-216
16 x 16
TC-PP301-217,2
TC-PA301-217,2
TC-RB301-217,2
17,2 x 17,2
TC-PP301-218
TC-PA301-218
TC-RB301-218
18 x 18
TC-PP301-319
TC-PA301-319
TC-RB301-319
19 x 19
TC-PP301-320
TC-PA301-320
TC-RB301-320
20 x 20
TC-PP301-321,3
TC-PA301-321,3
TC-RB301-321,3
21,3 x 21,3
TC-PP301-322
TC-PA301-322
TC-RB301-322
group
8x8
9,5 x 9,5
30
37
20
25
37
M6 x 35
30
53
29
26
55
M8 x 35
30
67
36
37
70
M8 x 45
30
82
45
42
85
M8 x 50
30
106
56
54
110
M8 x 60
10 x 10
14 x 14
2
15 x 15
22 x 22
TC-PP301-325
TC-PA301-325
TC-RB301-325
25 x 25
TC-PP301-325,4
TC-PA301-325,4
TC-RB301-325,4
25,4x 25,4
TC-PP301-426,9
TC-PA301-426,9
TC-RB301-426,9
TC-PP301-428
TC-PA301-428
TC-RB301-428
TC-PP301-430
TC-PA301-430
TC-RB301-430
26,9 x 26,9
4
28 x 28
30 x 30
TC-PP301-532
TC-PA301-532
TC-RB301-532
32 x 32
TC-PP301-533,7
TC-PA301-533,7
TC-RB301-533,7
33,7 x 33,7
TC-PP301-535
TC-PA301-535
TC-RB301-535
TC-PP301-538
TC-PA301-538
TC-RB301-538
TC-PP301-540
TC-PA301-540
TC-RB301-540
35 x 35
5
38 x 38
40 x 40
TC-PP301-542
TC-PA301-542
TC-RB301-542
42 x 42
TC-PP301-542,4
TC-PA301-542,4
TC-RB301-542,4
42,4 x 42,4
664
dimensions
a

DIN 3015 clamps - mounting elements
Standard clamp - short lower plate for complete clamps 100, 101 type
16
code
group
TC-APIN-0
TC-APIN-1
TC-APIN-2
TC-APIN-3
TC-APIN-4
TC-APIN-5
TC-APIN-6
0
1
2
3
4
5
6
code
group
TC-APIA-0
TC-APIA-1
TC-APIA-2
TC-APIA-3
TC-APIA-4
TC-APIA-5
TC-APIA-6
0
1
2
3
4
5
6
code
group
TC-APID-0
TC-APID-1
TC-APID-2
TC-APID-3
TC-APID-4
TC-APID-5
TC-APID-6
0
1
2
3
4
5
6
code
group
TC-APIM-0
TC-APM-1
TC-APIM-2
TC-APIM-3
TC-APIM-4
TC-APIM-5
TC-APIM-6
0
1
2
3
4
5
6
c
[mm]
20
26
33
40
52
66
F
[mm]
32
42
48
55
62
74
88
Standard clamp - long lower plate
16
F
[mm]
46
64
70
78
86
97
112
c
[mm]
20
26
33
40
52
66
d
[mm]
51
56
64
71
83
100
Standard clamp - double lower plate

F
[mm]
61
81
91
106
121
148
177
c
[mm]
20
26
33
40
52
66
N
[mm]
20
18
19
20
23
24
l
[mm]
30
40
44
52
60
75
90
no. of
clamps
2
2
2
2
2
2
2
F
[mm]
306
404
447
525
303
375
447
c
[mm]
20
26
33
40
52
66
N
[mm]
20
18
19
20
23
24
l
[mm]
30
40
44
52
60
75
90
no. of
clamps
10
10
10
10
5
5
5
Standard clamp - multiple lower plate
Standard clamp - upper plate for complete clamps 101 type
16
code
group
TC-APS-0
TC-APS-1
TC-APS-2
TC-APS-3
TC-APS-4
TC-APS-5
TC-APS-6
0
1
2
3
4
5
6
c
[mm]
20
26
33
40
52
66
F
[mm]
28
37
43
50
57
69
83
665

Standard clamp - allen screw for complete clamps 100 type
code
group
TC-AVTC-0
TC-AVTC-0
TC-AVTC-2
TC-AVTC-3
TC-AVTC-4
TC-AVTC-5
TC-AVTC-6
0
1
2
3
4
5
6
M
[mm]
M6
M6
M6
M6
M6
M6
M6
e
[mm]
20
20
25
30
35
50
60
M
[mm]
M6
M6
M6
M6
M6
M6
M6
e
[mm]
30
30
35
40
45
60
70
M
[mm]
M6
M6
M6
M6
M6
M6
M6
e
[mm]
20
20
25
30
35
50
60
F
[mm]
28
34
41
47
57
67
82
c
[mm]
20
26
33
40
52
66
c
[mm]
14
20
26
33
40
52
66
f
[mm]
32
42
48
55
62
74
88
Standard clamp - screw (hexagonal) for complete clamps 101 type

code
group
TC-AVTE-0
TC-AVTE-0
TC-AVTE-2
TC-AVTE-3
TC-AVTE-4
TC-AVTE-5
TC-AVTE-6
0
1
2
3
4
5
6
code
group
TC-AVTEA-0
TC-AVTEA-1
TC-AVTEA-2
TC-AVTEA-3
TC-AVTEA-4
TC-AVTEA-5
TC-AVTEA-6
0
1
2
3
4
5
6
code
group
TC-APMRS-0
TC-APMRS-1
TC-APMRS-2
TC-APMRS-3
TC-APMRS-4
TC-APMRS-5
TC-APMRS-6
0
1
2
3
4
5
6
code
group
TC-APINL-0
TC-APINL-1
TC-APINL-2
TC-APINL-3
TC-APINL-4
TC-APINL-5
TC-APINL-6
0
1
2
3
4
5
6
Standard clamp - stacking screw
Standard clamp - stacking security plate
Standard clamp - angular lower plate
666
16

Standard clamp - bridge lower plate
code
group
c
[mm]
f
[mm]
TC-APINB-1
20
48
TC-APINB-2
26
54
TC-APINB-3
33
62
TC-APINB-4
40
71
TC-APINB-5
52
85
TC-APINB-6
66
98
Double and standard clamp - rails and nuts

code
standard double
group
group
b
[mm]
TC-ABINS-1
TC-ABINS-2
TC-ABINS-3
15
06
h
[mm]
length
[m]
28
11
1 or 2
28
14
1 or 2
28
30
1 or 2
TC-ADES
nut for guide rails (M6, d = 12)
TC-ADESD
25
Double clamp - short lower plate for double complete clamps 301 type
code
group
S
[mm]
d
[mm]
F
[mm]
TC-ADPIN-1
12
37
TC-ADPIN-2
14
55
TC-ADPIN-3
14
70
TC-ADPIN-4
14
85
TC-ADPIN-5
14
110
code
group
f
[mm]
c
[mm]
s
[mm]
m
[mm]
no. of
clamps
TC-ADPIM-1
200
40
M6
TC-ADPIM-2
290
58
M8
TC-ADPIM-3
360
72
M8
TC-ADPIM-4
450
90
M8
TC-ADPIM-5
560
112
M8
Double clamp - multiple lower plate
Double clamp - upper plate for double complete clamps 301 type
code
group
F
[mm]
d
[mm]
TC-ADPS-1
35
TC-ADPS-2
52
TC-ADPS-3
66
TC-ADPS-4
81
TC-ADPS-5
105
667

Double clamp - screw (hexagonal) for double complete clamps 301 type
code
group
M
[mm]
e
[mm]
TC-ADVTE-1
M6
35
TC-ADVTE-2
M8
35
TC-ADVTE-3
M8
45
TC-ADVTE-4
M8
50
TC-ADVTE-5
M8
60
code
group
M
[mm]
e
[mm]
Double clamp - stacking screw
TC-ADVTEA-1
M6
20
TC-ADVTEA-2
M8
20
TC-ADVTEA-3
M8
29
TC-ADVTEA-4
M8
34
TC-ADVTEA-5
M8
47
code
group
F
[mm]
c
[mm]
X
[mm]
TC-APMRSD-1
30
30
11
TC-APMRSD-2-5
25
30
30
13
code
group
a
[mm]
F
[mm]
c
[mm]
S
[mm]
TC-APINP-1
30
75
33
TC-APINP-2
30
87
45
TC-APINP-3
30
102
60
TC-APINP-4
45
140
80
10
TC-APINP-5
60
180
122
10
TC-APINP-6
80
225
168
15
TC-APINP-7
90
270
205
15
TC-APINP-8
120
340
265
25
TC-APINP-9
160
520
395
30
code
group
a
[mm]
F
[mm]
c
[mm]
S
[mm]
TC-APSP-1
30
55
33
TC-APSP-2
30
70
45
TC-APSP-3
30
85
60
TC-APSP-4
45
120
80
10
TC-APSP-5
60
152
122
10
TC-APSP-6
80
205
168
15
TC-APSP-7
90
250
205
15
TC-APSP-8
120
320
265
25
TC-APSP-9
160
470
395
30
Double clamp - stacking security plate
Heavy clamp - short lower plate for

heavy complete clamps 201 type
Heavy clamp - upper plate for heavy

complete clamps 201 type
668

Heavy clamp - screw (hexagonal) for heavy complete clamps 201 type
M
[mm]
M10
M10
M10
M12
M16
M20
M24
M30
M30
e
[mm]
45
60
70
100
130
190
220
300
450
group
M
[mm]
e
[mm]
TC-AVTEAP-1
M10
26
TC-AVTEAP-2
M10
41
TC-AVTEAP-3
M10
52
TC-AVTEAP-4
M12
83
TC-AVTEAP-5
M16
110
code
group
a
[mm]
F
[mm]
c
[mm]
S
[mm]
TC-APMRSP-1
30
55
33
TC-APMRSP-2
30
70
45
TC-APMRSP-3
30
85
60
TC-APMRSP-4
45
120
90
10
TC-APMRSP-5
60
152
122
10
code
group
b
[mm]
h
[mm]
length
[m]
TC-ABINP-1
14
40
22
1 or 2
TC-ADESP-1
13
TC-ADESP-2
code
group
TC-APSPD-1
TC-APSPD-2
TC-APSPD-3
TC-APSPD-4
TC-APSPD-5
TC-APINPD-1
TC-APINPD-2
code
group
TC-AVTEP-1
TC-AVTEP-2
TC-AVTEP-3
TC-AVTEP-4
TC-AVTEP-5
TC-AVTEP-6
TC-AVTEP-7
TC-AVTEP-8
TC-AVTEP-9
1
2
3
4
5
6
7
8
9
code
Heavy clamp - stacking screw
Heavy clamp - stacking security plate
Heavy clamp - rails and nuts
Heavy clamp - upper and lower double plate
1
2
3
4
5
1
2
a
[mm]
60
60
60
90
120
60
60
f
[mm]
56
70
85
116
153
74
86
s
[mm]
8
8
8
10
10
8
8
c
[mm]
33
45
60
90
122
33
45
p
[mm]
31
31
31
46
61
31
31
d/m
[mm]
11
11
11
14
18
M10
M10
TC-APINPD-3
60
TC-APINPD-4
90
100
60
31
M10
140
10
90
46
TC-APINPD-5
120
M12
180
10
122
61
M16
669

NORMACONNECT pipe couplings
NORMACONNECT pipe coupling is a reliable solution for connecting thick and thin walled pipes made of metal
as well as other materials. Complies with the latest DIN 86128 standard. Widely used in:
- gas installations, fluid and solids transfer,
- construction,
- mining and deep exploitation,
- shipbuilding,
- fresh water supply and waste water treatment.
NORMACONNECT pipe coupling is an economical alternative to conventional pipe connecting techniques for
both plastic and metal pipes. All plain pipes can be fast and easily joined. The coupling is supplied as a ready-tofit set. It is pushed onto the pipes ends, aligned and rotated to any radial fitting position. For safe and successful
fitting it is enough to tighten the two bolts alternately with a torque wrench. Coupling is also reliable and tight under
the condition of angular or parallel deflection of pipe axes up to 35 mm. Abrupt pressure changes, vibration and
structure-born noise appearing in a pipe are considerably dampened by the coupling. NORMACONNECT pipe
coupling is light, handy, compact and can be easily fitted in tight and inaccessible spaces.
The patented double-lip sealing ring applied in NORMACONNECT pipe coupling ensures increased safety and
maximum tightness at both low and high working pressure. Due to special design of sealing lips, the efficiency of
sealing rises as internal pressure rises. It is achieved when the sealing lips of the ring are pressed even stronger
onto the pipe surface under pressure.
670

NORMACONNECT FLEX
Material:
Housing - AISI 304

Bolts - AISI 316L
Pins - AISI 304
Claw ring - AISI 301
Band insert - AISI 316Ti
Working temp.: From -20C up to +80C (NBR sealing)
From -30C up to +125C (EPDM sealing)
Couplings used to join metal and plastic pipes which are not under large mechanical load. The double-lip sealing
ring guarantees that the connection is highly resistant to pressure and vacuum. The protection ring used in this
version protects the sealing ring against UV light radiation, flame, etc.
code
pipe
O.D.
[mm]
clamp diam.
range
[mm]
nominal
pressure
[bar]
a
[mm]
b
[mm]
C max
[mm]
d
[mm]
R
[mm]
bolt
weight
[kg]
VA-FW4-026N
VA-FW4-028N
VA-FW4-030N
VA-FW4-033N
VA-FW4-035N
VA-FW4-038N
VA-FW4-042N
VA-FW4-044N
VA-FW4-048N
VA-FW4-054N
VA-FW4-057N
VA-FW4-060N
VA-FW4-076N
VA-FW4-084N
VA-FW4-088N
VA-FW4-104N
VA-FW4-108N
VA-FW4-114N
VA-FW4-129N
VA-FW4-133N
VA-FW4-139N
VA-FW4-154N
VA-FW4-159N
VA-FW4-168N
26,9
28,0
30,0
33,7
35,0
38,0
42,4
44,5
48,3
54,0
57,0
60,3
76,1
84,0
88,9
104,0
108,0
114,3
129,0
133,0
139,7
154,0
159,0
168,3
26,4 27,4
27,5 28,5
28,6 30,5
30,6 34,2
34,5 35,5
35,6 38,5
39,0 42,9
43,0 45,0
45,5 48,8
53,6 54,9
55,0 57,6
57,7 60,9
74,0 76,9
83,0 85,0
85,1 89,8
103,0 106,0
106,9 109,1
112,0 115,4
128,0 131,0
131,0 134,3
137,0 141,1
153,0 156,0
157,0 160,6
166,0 170,0
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
47
47
47
47
62,4
62,4
62,4
62,4
62,4
77,4
77,4
77,4
98
98
98
98
98
98
113
113
113
113
113
113
9,5
9,5
9,5
9,5
14,4
14,4
14,4
14,4
14,4
29,4
29,4
29,4
40,3
40,3
40,3
40,3
40,3
40,3
50
50
50
50
50
50
3
3
3
3
8
8
8
8
8
17
17
17
25
25
25
25
25
25
35
35
35
35
35
35
44
45
45
51
55
57
62
63
68
73
78
79
100
108
111
126
131
137
153
160
166
180
186
194
46
45
45
45
51
45
50
50
51
57
54
56
73
78
79
91
80
85
102
106
111
131
116
121
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
0,40
0,40
0,40
0,40
0,50
0,50
0,50
0,50
0,60
0,70
0,70
0,80
1,40
1,40
1,40
1,60
1,80
1,80
2,40
2,40
2,60
2,70
2,70
2,80
Code example of a coupling with EPDM sealing: VA-FW4-060E.
671

NORMACONNECT GRIP
Material:
Housing - AISI 304

Bolts - AISI 316L
Pins - AISI 304
Anchoring ring - AISI 316Ti
Claw ring - AISI 301
Band insert - AISI 316Ti
Working temp.: From -20C up to +80C (NBR sealing)
From -30C up to +125C (EPDM sealing)
Couplings used to join metal pipes operating under large mechanical load. The anchoring ring strongly grips the
pipe surface with its conically stamped teeth. Due to special design of the anchoring ring, the coupling resists high
vibration. The double-lip sealing ring guarantees that the connection is highly resistant to pressure and vacuum.
code
pipe
O.D.
[mm]
clamp diam.
range
[mm]
nominal
pressure
[bar]
a
[mm]
b
[mm]
C max
[mm]
d
[mm]
R
[mm]
bolt
weight
[kg]
VA-GW4-026N
VA-GW4-028N
VA-GW4-030N
VA-GW4-033N
VA-GW4-035N
VA-GW4-038N
VA-GW4-042N
VA-GW4-044N
VA-GW4-048N
VA-GW4-054N
VA-GW4-057N
VA-GW4-060N
VA-GW4-076N
VA-GW4-084N
VA-GW4-088N
VA-GW4-104N
VA-GW4-108N
VA-GW4-114N
VA-GW4-129N
VA-GW4-133N
VA-GW4-139N
VA-GW4-154N
VA-GW4-159N
VA-GW4-168N
26,9
28,0
30,0
33,7
35,0
38,0
42,4
44,5
48,3
54,0
57,0
60,3
76,1
84,0
88,9
104,0
108,0
114,3
129,0
133,0
139,7
154,0
159,0
168,3
26,4 27,4
27,5 28,5
28,6 30,5
30,6 34,2
34,5 35,5
35,6 38,5
39,0 42,9
43,0 45,0
45,5 48,8
53,6 54,9
55,0 57,6
57,7 60,9
74,0 76,9
83,0 85,0
85,1 89,8
103,0 106,0
106,9 109,1
112,0 115,4
128,0 131,0
131,0 134,3
137,0 141,1
153,0 156,0
157,0 160,6
166,0 170,0
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
16
47
47
47
47
62,4
62,4
62,4
62,4
62,4
77,4
77,4
77,4
98
98
98
98
98
98
115
115
115
115
115
115
9,5
9,5
9,5
9,5
14,4
14,4
14,4
14,4
14,4
29,4
29,4
29,4
40,3
40,3
40,3
40,3
40,3
40,3
50
50
50
50
50
50
3
3
3
3
8
8
8
8
8
17
17
17
25
25
25
25
25
25
35
35
35
35
35
35
44
45
45
51
55
57
62
63
68
73
78
79
100
108
111
126
131
137
153
160
166
180
186
194
44
45
45
46
51
48
50
50
53
57
55
69
75
76
80
77
86
88
101
106
109
110
118
115
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M8
M10
M10
M10
M10
M10
M10
M12
M12
M12
M12
M12
M12
0,40
0,40
0,40
0,40
0,50
0,50
0,60
0,60
0,60
0,80
0,80
0,80
1,50
1,60
1,70
1,80
1,80
1,80
3,10
3,30
3,30
3,40
3,50
3,60
Code example of a coupling with EPDM sealing: VA-GW4-060E.
672
HIGH PRESSURE - hoses

Hydraulic rubber hoses
Rubber hydraulic hoses are used in high pressure hydraulic systems for control and power supply. They are designed
to transfer hydraulic oil primarily (hydraulic fluid compliant with ISO 6743-4, apart from HFD R, HFD S and HFD T
fire-resistant fluids). For other applications (e.g. for compressed gases) always contact Technical Department of
TUBES INTERNATIONAL. For water, water-based fluids and air, the maximum working temperature is +70C. For
air over 17 bar, the external layer of the hose should be pinpricked and have additional protection.
Typical hydraulic rubber hoses can be classified into three different construction types:
Hoses with textile braid

(one or two)
Hoses with compacted

steel wire braids
(one, two or three)
Hoses with steel wire spirals

(four or six)
Hydraulic rubber hoses are manufactured in imperial size with standardized inside diameter.
The most popular standards setting the requirements for hoses are: European standards - EN, international ISO
and American SAE. The symbol of the standard and the most important data (diameter, working pressure and
production date) are marked on the hose. Additionally, there may be a specific name on the hose that is given by
a producer or customer.
hose name
standard
inside
diameter
working
pressure
production date
Table for initial hydraulic hose selection

Maximum working pressure [bar]
1 bar = 0,1 MPa
working pressure [bar]
hose type
3/16 1/4 5/16 3/8
1/2
3/4
16
20
25
32
38
51
50
45
40
93
80
70
55
180
160
130
105
88
63
50
40
standards
5/8
1.1/4 1.1/2
DN
code
TUBES
European
international
American
10
12
HW-2TE
EN 854 2TE
ISO 4079-1 2TE
80
75
68
63
58
HW-3TE
EN 854 3TE
ISO 4079-1 3TE
160
145
130
110
HW-1SN
EN 853 1SN
ISO 1436-1SN
SAE 100 R1AT
250
225
215
HW-1SC
EN 857 1SC
ISO 11237-1 1SC
HW-2SN
EN 853 2SN
ISO 1436-2SN
HW-2SC
EN 857 2SC
HW-4SP
EN 856 4SP
HW-4SH
EN 856 4SH
HW-R12
EN 856 R12
HW-R13
HW-R15
225
215
180
160
130
105
88
SAE 100 R2AT
415
400
350
330
275
250
215
165
125
90
80
ISO 11237-1 2SC
400
350
330
275
250
215
165
ISO 3862-1 4SP
450
445
415
350
350
280
210
185
165
ISO 3862-1 4SH
420
380
325
290
250
ISO 3862-1 R12
SAE 100 R12
280
280
280
280
280
EN 856 R13
ISO 3862-1 R13
SAE 100 R13
345
345
345
345
345
ISO 3862-1 R15
SAE 100 R15
420
420
420
420
Apart from regular hydraulic rubber hoses manufactured according to the standards above, there are also hoses
that exceed these standards (see next page).
673

Superior flexibility
Hydraulic hoses with minimum bend radius smaller than standard are much more flexible.
Example:
HW-2SN-10P - min. bend radius R = 125 mm
(meets the requirements of EN 853 2SN)
HW-2SN/UF-10P - min. bend radius R = 65 mm
(exceeds the requirements of EN 853 2SN)
Superior pressure parameters
The maximum working pressure of some hydraulic hoses exceeds standard requirements. The hoses can be
easily used for applications with the same safety factor without need to change the diameter (e.g. for smaller one)
or change hose type (from double braid to hose with steel wire spirals).
Example:
HW-2SC-12P - maximum working pressure 275 bar
(COMPACT hose meets the requirements of EN 857 2SC)
HW-2SC/BE/K-12P - maximum working pressure 325 bar
(COMPACT hose exceeds the requirements of EN 857 2SC)
Superior temperature parameters
There is a defined working temperature range for each hydraulic hose type. For hoses with textile braids (2TE,
3TE), steel wire braids (1SC, 2SC,1SN, 2SN), and for some groups of hoses with steel wire spiral (4SP, 4SH), the
working temperature ranges from -40C up to +100C (with peaks up to +125C). For hoses with steel wire spirals,
constant pressure independent of diameter (R12, R13, R15), the temperature ranges from -40C up to +121C
(with peaks up to +125C).
The working temperature of a hydraulic system may be higher than the one above. Then the use of standard
hoses is not recommended. If the maximum working temperature of the hydraulic rubber hose is exceeded, the
rubber hardens so its flexibility is limited. What is more, the assembly is no longer tight and leaks start to occur at
the hose ends, where the fittings are. In such cases, the hoses with a superior temperature range should be used.
Example:
HW-/HT is a group of hoses with a temperature range extended to +135C
(with peaks up to +150C) at maximum ambient temperature around +100C.
Superior abrasion resistance
Hydraulic rubber hoses manufactured according to the regular standards have limited abrasion resistance of the
external layer. Abrasion tests are carried out according to EN ISO 6945 standard. It defines the weight loss of a
hose sample after a number of cycles of longitudinally applied load (e.g. the maximum weight loss for hoses of
1SN and 2SN type is 0.5 g after 2,000 cycles of longitudinal load of 25 0.5 N).
In order to increase the abrasion resistance of hoses, manufacturers apply an additional layer (e.g. UHMWPE
Ultra-High Molecular Weight Polyethylene - cross-linked PE). Then, there is no need for adding any extra protection
covers (e.g. spirals).
Example:
HW-/AR is a group of hoses with excellent abrasion resistance
(300 times better than those of regular hoses)
674

Superior service life
When hydraulic rubber hoses operate under actual service conditions, their service life depends on many factors
of which the crucial ones are:
- fatigue strength of a flexible hose assembly under variable internal pressure, bending as well as internal and
external temperature changes,
- aging resistance (natural loss of mechanical properties of hose material),
- resistance to external impact.
The fatigue strength of a hose assembly can be estimated through hydraulic tests with the use of pulsating pressure
with or without cyclic bending. Specific requirements for the tests are described in standards (ISO 6803, ISO 6802,
ISO 8032). The standards determine the required pulsating pressure endurance defined as the number of pulsating
pressure cycles (impulses). Frequency of pulsating pressure is quite high (around 1 Hz), testing pressure rises
from 100% to 133% of the maximum working pressure and temperature during test is elevated (+100C).
Note that the obtained results are not fully reliable in terms of service life under actual operating conditions of the
hose. However they help to determine whether the hose meets or even exceeds the relevant standard requirements
and allow to compare the hose parameters of different producers.
actual service life of hydraulic hose
service life of hydraulic hose during

the tests described above
pressure
pressure impulses
1 pulse cycle
time
hose bending
years (months) of operation until breakdown
thousands of cycles (bends) until breakdown
Examples:
The EN853 standard requires the hose of 2SN type to withstand the minimum of 200,000 impulse cycles at pulsating
pressure which amounts to 133% of the maximum working pressure.
HW-2SN-P hoses
Confirmed service life of 400,000 impulse cycles.
The EN857 standard requires the hose of 4SH type to withstand the minimum of 400,000 impulse cycles at pulsating
pressure which amounts to 133% of the maximum working pressure.
HW-4SH-P hoses
Confirmed service life of 1,000,000 impulse cycles.
675

HW-2TE
Internal layer:
Reinforcement:
External layer:
Working temp.:

One textile braid
Characteristics: General purpose hydraulic hose. Designed for low pressure installations. It is highly flexible
and lightweight.
Standards:
EN 854 2TE.
Assembly:
Use Z type fittings - non-skived (IT-50).
code
I.D.
[mm]
O.D.
[mm]
HW-2TE-05
HW-2TE-06
HW-2TE-08
HW-2TE-10
HW-2TE-13
HW-2TE-16
HW-2TE-19
HW-2TE-25
4,8
6,4
8
9,5
12,7
16
19
25,4
11,8
13,4
14,9
16,5
19,7
23,9
27
34,4
working
pressure
[bar]
80
75
68
63
58
50
45
40
HW-3TE
bursting
pressure
[bar]
320
300
270
252
232
200
180
160
Internal layer:
Reinforcement:
External layer:
Working temp.:
bending
radius
[mm]
25
40
50
60
70
90
110
150
weight
[kg/m]
0,11
0,14
0,17
0,19
0,24
0,33
0,38
0,57

Two textile braid
Characteristics: General purpose hydraulic hose. Designed for low pressure installations. It is highly flexible
and lightweight.
Standards:
EN 854 3TE.
Assembly:
676
code
I.D.
[mm]
O.D.
[mm]
HW-3TE-06
HW-3TE-08
HW-3TE-10
HW-3TE-13
HW-3TE-16
HW-3TE-19
HW-3TE-25
6,4
8
9,5
12,7
16
19
25,4
14,4
16,9
18,5
21,7
25,9
29
35,9
working
pressure
[bar]
145
130
110
93
80
70
55
bursting
pressure
[bar]
580
520
440
372
320
280
220
bending
radius
[mm]
45
55
70
85
105
130
150
weight
[kg/m]
0,19
0,25
0,27
0,34
0,47
0,54
0,68

HW-1SN
Internal layer:
Reinforcement:
External layer:
Working temp.:

One steel wire braid
Characteristics: General purpose hydraulic hose.

Standards:
EN 853-1SN, ISO 1436-1SN/R1AT, SAE 100R1AT.
Assembly:
Use Z and S type fittings - non-skived (IT-4, IT-37).
code
I.D.
[mm]
O.D.
[mm]
HW-1SN-05
HW-1SN-06
HW-1SN-08
HW-1SN-10
HW-1SN-13
HW-1SN-16
HW-1SN-19
HW-1SN-25
HW-1SN-32
HW-1SN-38
HW-1SN-51
4,8
6,4
8
9,5
12,7
16
19
25,4
31,8
38,1
50,8
11,6
13,3
14,9
17,3
20,4
23,5
27,5
35,4
43,4
50,1
63,6
working
pressure
[bar]
250
225
215
180
160
130
105
88
63
50
40
HW-2SN
bursting
pressure
[bar]
1000
900
850
720
640
520
420
350
250
200
160
Internal layer:
Reinforcement:
External layer:
Working temp.:
bending
radius
[mm]
90
100
115
130
180
200
240
300
420
500
630
weight
[kg/m]
0,20
0,23
0,27
0,34
0,41
0,51
0,63
0,95
1,25
1,59
2,15

Two steel wire braids

Standards:
EN 853-2SN, ISO 1436-1 2SN/R2AT, SAE100 R2AT.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-2SN-05
HW-2SN-06
HW-2SN-08
HW-2SN-10
HW-2SN-13
HW-2SN-16
HW-2SN-19
HW-2SN-25
HW-2SN-32
HW-2SN-38
HW-2SN-51
4,8
6,4
8
9,5
12,7
16
19
25,4
31,8
38,1
50,8
13,4
14,9
16,5
18,9
22
25,2
29,1
37,7
47,8
54,1
66,9
working
pressure
[bar]
415
400
350
330
275
250
215
165
125
90
80
bursting
pressure
[bar]
1650
1600
1400
1320
1100
1000
850
650
500
360
320
bending
radius
[mm]
90
100
115
130
180
200
240
300
420
500
630
weight
[kg/m]
0,31
0,37
0,41
0,51
0,63
0,76
0,96
1,39
1,99
2,35
3,08
677

Hydraulic rubber hoses (compact version)
HW-1SC
Internal layer:
Reinforcement:
External layer:
Working temp.:

Characteristics: General purpose hydraulic hose with reduced outside diameter and weight and thus increased
flexibility.
Standards:
Meets or exceeds the requirements of EN 857-1SC, SAE 100R1 AT.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-1SC-06
HW-1SC-08
HW-1SC-10
HW-1SC-13
HW-1SC-16
HW-1SC-19
6,4
8
9,5
12,7
16
19
12,4
14
15,6
18,7
21,5
25
working
pressure
[bar]
225
215
180
160
130
105
HW-2SC
bursting
pressure
[bar]
900
860
720
640
520
420
Internal layer:
Reinforcement:
External layer:
Working temp.:
bending
radius
[mm]
75
85
90
130
150
180
weight
[kg/m]
0,20
0,22
0,23
0,35
0,40
0,48

flexibility.
Standards:
Meets or exceeds the requirements of EN 857-2SC, SAE 100R16, SAE 100R2AT.
Assembly:
678
code
I.D.
[mm]
O.D.
[mm]
HW-2SC-06
HW-2SC-08
HW-2SC-10
HW-2SC-13
HW-2SC-16
HW-2SC-19
HW-2SC-25
6,4
8
9,5
12,7
16
19
25,4
13,4
15
17,4
20,6
23,7
27,7
35,6
working
pressure
[bar]
400
350
330
275
250
215
165
bursting
pressure
[bar]
1600
1400
1320
1100
1000
860
660
bending
radius
[mm]
75
85
90
130
170
200
250
weight
[kg/m]
0,30
0,35
0,42
0,54
0,63
0,80
1,17

Hydraulic rubber hoses (multispiral)
HW-4SP
Internal layer:
Reinforcement:
External layer:
Working temp.:

Four steel wire spirals

Standards:
EN 856 4SP, ISO 3862-1 4SP.
Assembly:
Use Z type fittings, M and Z type ferrules - external skiving (IT-9, IT-31).
Acceptable use of N type fittings - non-skived (IT-82).
code
I.D.
[mm]
O.D.
[mm]
HW-4SP-06
HW-4SP-10
HW-4SP-13
HW-4SP-16
HW-4SP-19
HW-4SP-25
HW-4SP-32
HW-4SP-38
HW-4SP-51
6,4
9,5
12,7
16
19
25,4
31,8
38,1
50,8
17,8
21,4
24,6
28,5
32,1
39,7
50,8
57,1
70,6
working
pressure
[bar]
450
445
415
350
350
280
210
185
165
HW-4SH
bursting
pressure
[bar]
2370
2050
1750
1720
1800
1450
1100
960
920
Internal layer:
Reinforcement:
External layer:
Working temp.:
bending
radius
[mm]
150
180
230
250
300
340
460
560
660
weight
[kg/m]
0,62
0,85
0,93
1,15
1,55
2,03
3,17
3,66
5,14


Standards:
EN 856 4SH, ISO 3862-1 4SH.
Assembly:
Use IL type fittings - external and internal skiving (IT-34).
Acceptable use of Z type fittings and M type ferrules - external skiving (IT-11).
code
I.D.
[mm]
O.D.
[mm]
HW-4SH-19
HW-4SH-25
HW-4SH-32
HW-4SH-38
HW-4SH-51
19
25,4
31,8
38,1
50,8
32,2
38,7
45,5
53,5
68,1
working
pressure
[bar]
420
380
325
290
250
bursting
pressure
[bar]
1830
1620
1410
1250
1100
bending
radius
[mm]
280
340
460
560
700
weight
[kg/m]
1,55
2,09
2,57
3,44
4,90
679

Hydraulic rubber hoses (multispiral)
HW-R13
Internal layer:
Reinforcement: Four steel wire spirals
(six for DN 32 DN 51)

Standards:
EN 856 R13, SAE 100 R13, ISO 3862-1 R13.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-R13-19
HW-R13-25
HW-R13-32
HW-R13-38
HW-R13-51
19
25,4
31,8
38,1
50,8
32,6
39,2
50,4
57,9
71,9
working
pressure
[bar]
345
345
345
345
345
bursting
pressure
[bar]
1810
1780
1720
1600
1450
bending
radius
[mm]
240
300
419
508
635
weight
[kg/m]
1,65
2,26
3,89
4,95
7,09
HW-R15
Internal layer:
(six for DN 32, DN 38)
External layer: Synthetic rubber

Standards:
SAE 100 R15.
Assembly:
680
code
I.D.
[mm]
O.D.
[mm]
HW-R15-19
HW-R15-25
HW-R15-32
HW-R15-38
19
25,4
31,8
38,1
32,2
38,7
50,4
57,9
working
pressure
[bar]
420
420
420
420
bursting
pressure
[bar]
1700
1700
1700
1700
bending
radius
[mm]
267
330
445
533
weight
[kg/m]
1,55
2,11
3,65
5,01

Hydraulic rubber hoses with increased parameters
PERFORMER 1SN
Internal layer:
Reinforcement:
External layer:
Working temp.:

Characteristics: General purpose hydraulic hose with service life exceeding the standard.
Service life: 300,000 impulse cycles min.
Standards:
EN853-1SN, ISO 1436-1SN, SAE 100R1S-AT.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-1SN-05P
HW-1SN-06P
HW-1SN-08P
HW-1SN-10P
HW-1SN-13P
HW-1SN-16P
HW-1SN-19P
HW-1SN-25P
HW-1SN-32P
HW-1SN-38P
HW-1SN-51P
4,8
6,4
7,9
9,5
12,7
15,9
19
25,4
31,8
38,1
50,8
11,5
13,2
15
17,3
20,6
23,9
27,6
35,3
43,2
50,7
64,2
working
pressure
[bar]
250
225
215
180
160
130
105
90
63
50
40
bursting
pressure
[bar]
1000
900
850
720
640
520
420
360
252
200
160
bending
radius
[mm]
90
100
115
125
180
205
240
300
420
500
630
weight
[kg/m]
0,18
0,23
0,27
0,35
0,41
0,52
0,64
1,00
1,28
1,65
2,29
Standards: Manufactured according to the producers standard.

Assembly: Contact Technical Department of TUBES INTERNATIONAL.
code
I.D.
[mm]
O.D.
[mm]
HW-1SN-63P
HW-1SN-76P
HW-1SN-102P
63,5
76,2
101,6
78
91
116
working
pressure
[bar]
50
35
25
bursting
pressure
[bar]
200
140
100
bending
radius
[mm]
760
900
1250
weight
[kg/m]
2,87
3,32
4,01
681

PERFORMER 2SN
Internal layer:
Reinforcement:
External layer:
Working temp.:

Characteristics: General purpose hydraulic hose with service life exceeding the standard.
Service life: 400,000 impulse cycles min.
Standards:
EN853-2SN, ISO 1436-2SN, SAE 100R2S-AT.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-2SN-05P
HW-2SN-06P
HW-2SN-08P
HW-2SN-10P
HW-2SN-13P
HW-2SN-16P
HW-2SN-19P
HW-2SN-25P
HW-2SN-32P
HW-2SN-38P
HW-2SN-51P
4,8
6,4
7,9
9,5
12,7
15,9
19
25,4
31,8
38,1
50,8
12,8
14,9
16,7
19,1
22,1
25,3
29,6
37,7
47,7
54
67,5
working
pressure
[bar]
450
400
350
330
275
250
215
165
125
90
80
bursting
pressure
[bar]
1800
1600
1400
1320
1100
1000
860
660
500
360
320
bending
radius
[mm]
90
100
115
125
180
205
240
300
420
500
630
weight
[kg/m]
0,30
0,40
0,46
0,55
0,64
0,78
0,97
1,42
2,12
2,55
3,20
Standards: Manufactured according to the producers standard.

Assembly: Contact Technical Department of TUBES INTERNATIONAL.
682
code
I.D.
[mm]
O.D.
[mm]
HW-2SN-63P
HW-2SN-76P
HW-2SN-102P
63,5
76,2
101,6
80
93
118
working
pressure
[bar]
70
55
40
bursting
pressure
[bar]
280
220
160
bending
radius
[mm]
760
900
1250
weight
[kg/m]
3,71
4,39
5,30

ULTRAFLEX 1SN
Internal layer:
Reinforcement:
External layer:
Working temp.:

Characteristics: General purpose hydraulic hose with increased flexibility (bend radius 50% smaller than required
by the standard for 1SN type hoses). Service life: 300,000 impulse cycles min.
Standards:
Exceeds EN853-1SN, ISO 1436-1SN, SAE 100R1S-AT.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-1SN/UF-06P
HW-1SN/UF-08P
HW-1SN/UF-10P
HW-1SN/UF-13P
HW-1SN/UF-16P
HW-1SN/UF-19P
HW-1SN/UF-25P
6,4
7,9
9,5
12,7
15,9
19
25,4
13,2
15
17,3
20,6
23,9
27,6
35,3
working
pressure
[bar]
225
215
180
160
130
105
90
bursting
pressure
[bar]
900
860
720
640
520
420
360
bending
radius
[mm]
50
58
65
90
100
120
150
weight
[kg/m]
0,19
0,23
0,30
0,38
0,50
0,65
0,87
ULTRAFLEX 2SN
Internal layer:
Reinforcement:
External layer:
Working temp.:

Characteristics: General purpose hydraulic hose with increased flexibility (bend radius 50% smaller than required
by the standard for 2SN type hoses). Service life: 400,000 impulse cycles min.
Standards:
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-2SN/UF-06P
HW-2SN/UF-08P
HW-2SN/UF-10P
HW-2SN/UF-13P
HW-2SN/UF-16P
HW-2SN/UF-19P
HW-2SN/UF-25P
6,4
7,9
9,5
12,7
15,9
19
25,4
14,9
16,7
19,1
22,1
25,3
29,6
37,7
working
pressure
[bar]
400
350
330
275
250
215
165
bursting
pressure
[bar]
1600
1400
1320
1100
1000
860
660
bending
radius
[mm]
50
58
65
90
100
120
150
weight
[kg/m]
0,37
0,43
0,53
0,61
0,77
0,92
1,27
683

THERMAL 1SN/HT
Internal layer:
Reinforcement:
External layer:
Working temp.:

Characteristics: Hydraulic hose with wider working temperature range than required by the standard. Service
life: 300,000 impulse cycles min.
Standards:
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-1SN/HT-06P
HW-1SN/HT-08P
HW-1SN/HT-10P
HW-1SN/HT-13P
HW-1SN/HT-16P
HW-1SN/HT-19P
HW-1SN/HT-25P
HW-1SN/HT-32P
HW-1SN/HT-38P
HW-1SN/HT-51P
6,4
7,9
9,5
12,7
15,9
19
25,4
31,8
38,1
50,8
13,2
15
17,3
20,6
23,9
27,6
35,3
43,2
50,7
64,2
working
pressure
[bar]
225
215
180
160
130
105
88
63
50
40
bursting
pressure
[bar]
900
860
720
640
520
420
360
252
200
160
bending
radius
[mm]
100
115
125
180
205
240
300
420
500
630
weight
[kg/m]
0,23
0,28
0,36
0,42
0,53
0,65
1,01
1,29
1,66
2,32
THERMAL 2SN/HT
Internal layer:
Reinforcement:
External layer:
Working temp.:

Characteristics: Hydraulic hose with wider working temperature range than required by the standard. Service
life: 400,000 impulse cycles min.
Standards:
Assembly:
684
code
I.D.
[mm]
O.D.
[mm]
HW-2SN/HT-06P
HW-2SN/HT-08P
HW-2SN/HT-10P
HW-2SN/HT-13P
HW-2SN/HT-16P
HW-2SN/HT-19P
HW-2SN/HT-25P
HW-2SN/HT-32P
HW-2SN/HT-38P
HW-2SN/HT-51P
6,4
7,9
9,5
12,7
15,9
19
25,4
31,8
38,1
50,8
13,2
16,7
19,1
22,1
25,3
29,6
37,7
47,7
54
67,5
working
pressure
[bar]
400
350
330
275
250
215
165
125
90
80
bursting
pressure
[bar]
1600
1400
1320
1100
1000
860
660
500
360
320
bending
radius
[mm]
100
115
125
180
205
240
300
420
500
630
weight
[kg/m]
0,41
0,48
0,56
0,65
0,79
0,99
1,44
2,14
2,58
3,24

ULTIMATE 1SN/HT
Internal layer:
Reinforcement:
External layer:
Working temp.:

Characteristics: Hydraulic hose with wider working temperature range than required by the standard.
Standards:
Exceeds EN853-1SN, ISO 1436-1SN, SAE 100R1-AT.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-1SN/HT-06S
HW-1SN/HT-08S
HW-1SN/HT-10S
HW-1SN/HT-13S
HW-1SN/HT-16S
HW-1SN/HT-19S
HW-1SN/HT-25S
HW-1SN/HT-32S
HW-1SN/HT-38S
HW-1SN/HT-51S
6,4
8
9,5
12,7
16
19
25,4
31,8
38,1
50,8
13,2
14,8
17,2
20,4
23,5
27,5
35,4
43,5
50
63,6
working
pressure
[bar]
225
215
180
160
130
105
88
63
50
40
bursting
pressure
[bar]
900
850
720
640
520
420
350
250
200
160
bending
radius
[mm]
100
115
130
180
200
240
300
420
500
630
weight
[kg/m]
0,24
0,28
0,36
0,45
0,55
0,64
0,96
1,36
1,54
2,09
ULTIMATE 2SN/HT
Internal layer:
Reinforcement:
External layer:
Working temp.:

Characteristics: Hydraulic hose with wider working temperature range than required by the standard.
Standards:
Exceeds EN853-2SN, ISO 1436-2SN, SAE 100R2-AT.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-2SN/HT-06S
HW-2SN/HT-08S
HW-2SN/HT-10S
HW-2SN/HT-13S
HW-2SN/HT-16S
HW-2SN/HT-19S
HW-2SN/HT-25S
HW-2SN/HT-32S
HW-2SN/HT-38S
HW-2SN/HT-51S
6,4
8
9,5
12,7
16
19
25,4
31,8
38,1
50,8
15
16,5
18,9
22,2
25,2
29,2
37,2
47,3
53,7
66,7
working
pressure
[bar]
400
350
330
275
250
215
165
125
90
78
bursting
pressure
[bar]
1600
1400
1320
1100
1000
850
650
500
360
310
bending
radius
[mm]
100
115
130
180
205
240
300
420
500
630
weight
[kg/m]
0,40
0,47
0,58
0,68
0,80
0,99
1,38
2,04
2,28
2,97
685

PROKOMP 1SC
Internal layer:
Reinforcement:
External layer:
Working temp.:

flexibility (COMPACT type). Service life: 300,000 impulse cycles min.
Standards:
EN857-1SC, ISO 11237-1.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-1SC-06P
HW-1SC-08P
HW-1SC-10P
HW-1SC-13P
HW-1SC-16P
HW-1SC-19P
HW-1SC-25P
6,4
7,9
9,5
12,7
15,9
19
25,4
12,5
13,5
15,7
19
22,4
25,8
33,5
working
pressure
[bar]
225
215
180
160
130
105
90
bursting
pressure
[bar]
900
860
720
640
520
420
360
bending
radius
[mm]
50
55
60
70
90
100
160
weight
[kg/m]
0,19
0,21
0,26
0,33
0,41
0,52
0,73
PROKOMP 2SC
Internal layer:
Reinforcement:
External layer:
Working temp.:

flexibility (COMPACT type). Service life: 400,000 impulse cycles min.
Standards:
EN857-2SC, SAE 100R16, ISO 11237-1.
Assembly:
686
code
I.D.
[mm]
O.D.
[mm]
HW-2SC-06P
HW-2SC-08P
HW-2SC-10P
HW-2SC-13P
HW-2SC-16P
HW-2SC-19P
HW-2SC-25P
6,4
7,9
9,5
12,7
15,9
19
25,4
13,5
15
17,1
20,5
23,5
27,5
35,5
working
pressure
[bar]
400
350
330
275
250
215
165
bursting
pressure
[bar]
1600
1400
1320
1100
1000
860
660
bending
radius
[mm]
50
55
65
80
90
120
150
weight
[kg/m]
0,31
0,35
0,42
0,52
0,62
0,86
1,11

ARMOUR 1SC
Internal layer:
Reinforcement: One steel wire braid
with polymer cover
flexibility (COMPACT type). The external polymer cover ensures increased abrasion resistance
(300 times higher than the standard) and low coefficient of friction that is crucial for reel
application and when hoses rub against each other. Increased resistance to UV radiation and
ozone. Service life: 300,000 impulse cycles min.
Standards:
EN857-1SC, ISO 11237-1.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-1SC/AR-06P
HW-1SC/AR-08P
HW-1SC/AR-10P
HW-1SC/AR-13P
HW-1SC/AR-16P
HW-1SC/AR-19P
HW-1SC/AR-25P
6,4
7,9
9,5
12,7
15,9
19
25,4
12,5
13,5
15,7
19
22,4
25,8
33,3
working
pressure
[bar]
225
215
180
160
130
105
90
bursting
pressure
[bar]
900
860
720
640
520
420
360
bending
radius
[mm]
50
55
60
70
90
100
160
weight
[kg/m]
0,19
0,21
0,26
0,33
0,41
0,52
0,67
ARMOUR 2SC
Internal layer:
Reinforcement: Two steel wire braids
with polymer cover
flexibility (COMPACT type). The external polymer cover ensures increased abrasion resistance
(300 times higher than the standard) and low coefficient of friction that is crucial for reel
application and when hoses rub against each other. Increased resistance to UV radiation and
ozone. Service life: 400,000 impulse cycles min.
Standards:
EN857-2SC, SAE 100R16, ISO 11237-1.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-2SC/AR-06P
HW-2SC/AR-08P
HW-2SC/AR-10P
HW-2SC/AR-13P
HW-2SC/AR-16P
HW-2SC/AR-19P
HW-2SC/AR-25P
6,4
7,9
9,5
12,7
15,9
19
25,4
13,5
15
17,1
20,5
23,5
27,5
35,5
working
pressure
[bar]
400
350
330
275
250
215
165
bursting
pressure
[bar]
1600
1400
1320
1100
1000
860
660
bending
radius
[mm]
50
55
65
80
90
120
150
weight
[kg/m]
0,31
0,35
0,42
0,52
0,62
0,86
1,15
687

BASTION 2SC
Internal layer:
Reinforcement:
External layer:
Working temp.:

flexibility (COMPACT type). Designed for heavy duty applications. Superior resistance to impulse
pressure. The external layer, made of special rubber compound, is antistatic, highly resistant
to flame (exceeds MSHA requirements), ozone, weather, abrasion and UV radiation. Certified
by MSHA.
Standards:
Exceeds EN857-2SC, SAE 100R 16S, ISO 11237-1.
Assembly:
Contact Technical Department of TUBES INTERNATIONAL.
code
I.D.
[mm]
O.D.
[mm]
HW-2SC/BN -06P
HW-2SC/BN -10P
HW-2SC/BN -13P
HW-2SC/BN -16P
HW-2SC/BN -19P
HW-2SC/BN -25P
6,4
9,5
12,7
15,9
19
25,4
12,8
16,6
20,1
23,5
27,6
35,4
working
pressure
[bar]
400
330
275
250
245
210
bursting
pressure
[bar]
1850
1500
1220
1050
980
840
bending
radius
[mm]
45
65
80
90
120
150
weight
[kg/m]
0,26
0,39
0,50
0,64
0,80
1,14
BRUTE/K 2SC
Internal layer:
Reinforcement:
External layer:
Working temp.:

flexibility (COMPACT type). Higher working pressure compared to standard 2SC hydraulic hoses.
Standards:
Exceeds EN857-2SC.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-2SC/BE/K -06P
HW-2SC/BE/K -08P
HW-2SC/BE/K -10P
HW-2SC/BE/K -13P
HW-2SC/BE/K -16P
HW-2SC/BE/K -19P
HW-2SC/BE/K -25P
6,4
7,9
9,5
12,7
15,9
19
25,4
13,5
15,7
17,1
20,9
25,1
27,9
35,4
688
working
pressure
[bar]
450
420
380
325
290
280
210
bursting
pressure
[bar]
1800
1680
1520
1300
1160
1120
840
bending
radius
[mm]
50
65
80
90
120
120
150
weight
[kg/m]
0,31
0,36
0,44
0,55
0,60
0,86
1,29

HI-PULSE 4SP
Internal layer:
Reinforcement:
External layer:
Working temp.:

Characteristics: General purpose hydraulic hose. The external layer is flame resistant, MSHA approved. Service
life longer than required by the standard: 1,000,000 impulse cycles min.
Standards:
EN856 4SP, ISO 3862-1 4SP.
Assembly:
Acceptable use of N type fittings - non-skived.
code
I.D.
[mm]
O.D.
[mm]
HW-4SP-10P
HW-4SP-13P
HW-4SP-16P
HW-4SP-19P
HW-4SP-25P
HW-4SP-32P
HW-4SP-38P
HW-4SP-51P
9,5
12,7
15,9
19
25,4
31,8
38,1
50,8
21,4
24
27,6
32,1
38,7
49,8
57,3
71,1
working
pressure
[bar]
460
430
350
350
320
210
190
180
bursting
pressure
[bar]
1840
1720
1400
1400
1280
840
760
720
bending
radius
[mm]
180
230
250
300
340
460
560
660
weight
[kg/m]
0,75
0,90
1,09
1,51
2,09
3,10
3,61
5,03
HI-PULSE 4SH
Internal layer:
Reinforcement:
External layer:
Working temp.:

Standards:
EN856 4SH, ISO 3862-1 4SH.
Assembly:
Acceptable use of Z type fittings and M type ferrules - external skiving (IT-11).
code
I.D.
[mm]
O.D.
[mm]
HW-4SH-19P
HW-4SH-25P
HW-4SH-32P
HW-4SH-38P
HW-4SH-51P
19
25,4
31,8
38,1
50,8
32,1
38,7
45,5
52,5
67,5
working
pressure
[bar]
420
390
350
290
250
bursting
pressure
[bar]
1680
1560
1400
1160
1000
bending
radius
[mm]
280
340
460
560
700
weight
[kg/m]
1,51
2,09
3,10
3,61
5,03
689

Hydraulic rubber hoses with increased parameters.
HI-PULSE 6SP
Internal layer:
Reinforcement:
External layer:
Working temp.:

Six steel wire spirals
Characteristics: Hydraulic hose with superior resistance to high impulse pressure. Widely used on drilling rigs
(in drilling equipment). The external layer is resistant to flame (MSHA approved), weather and
abrasion. Service life: 500,000 impulse cycles min.
Standards:
Manufactured according to the producers standard.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-6SP-19P
HW-6SP-25P
HW-6SP-32P
HW-6SP-38P
HW-6SP-51P
HW-6SP-63P
HW-6SP-76P
19
25
31
38
51
63
76
33,8
41
51
59,1
72
87,2
94,4
working
pressure
[bar]
600
560
525
475
420
350
210
bursting
pressure
[bar]
2400
2240
2100
1900
1680
1400
840
bending
radius
[mm]
300
300
420
500
600
800
900
weight
[kg/m]
2,22
2,81
4,37
5,32
6,75
9,18
8,16
IMPETUS R12
Internal layer:
Reinforcement:
External layer:
Working temp.:

life longer than required by the standard, 1,000,000 impulse cycles min.
Standards:
EN856 R12, ISO 3862-1 R12, SAE 100R12.
Assembly:
690
code
I.D.
[mm]
O.D.
[mm]
HW-R12-10P
HW-R12-13P
HW-R12-16P
HW-R12-19P
HW-R12-25P
HW-R12-32P
HW-R12-38P
HW-R12-51P
9,5
12,7
15,9
19
25,4
31,8
38,1
50,8
20,3
23,8
27,4
30,7
38
47
53,3
66,7
working
pressure
[bar]
280
280
280
280
280
280
280
280
bursting
pressure
[bar]
1120
1120
1120
1120
1120
1120
1120
1120
bending
radius
[mm]
130
180
200
240
300
420
500
600
weight
[kg/m]
0,66
0,84
1,04
1,35
1,93
2,71
3,22
4,78

IMPETUS R13
Internal layer:
Standards:
EN856 R13, ISO 3862-1 R13, SAE 100R13.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-R13-10P
HW-R13-13P
HW-R13-16P
HW-R13-19P
HW-R13-25P
HW-R13-32P
HW-R13-38P
HW-R13-51P
9,5
12,7
15,9
19
25,4
31,8
38,1
50,8
20,5
24
27,6
32,1
38,7
49,8
57,3
71,1
working
pressure
[bar]
350
350
350
350
350
350
350
350
bursting
pressure
[bar]
1400
1400
1400
1400
1400
1400
1400
1400
bending
radius
[mm]
130
180
200
240
300
420
500
600
weight
[kg/m]
0,71
0,88
1,20
1,51
2,11
3,58
4,91
6,89
IMPETUS R15
Internal layer:
life longer than required by the standard, 1,000,000 impulse cycles min.
Standards:
EN856 R15, ISO 3862-1 R15, SAE 100R15.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-R15-19P
HW-R15-25P
HW-R15-32P
HW-R15-38P
HW-R15-51P
19
25,4
31,8
38,1
50,8
32
39
50
58
72
working
pressure
[bar]
420
420
420
420
420
bursting
pressure
[bar]
1680
1680
1680
1680
1680
bending
radius
[mm]
270
300
420
500
600
weight
[kg/m]
1,56
2,04
3,63
4,81
6,94
691

Hydraulic rubber hoses (mining)
Hydraulic rubber hoses designed for mine application must meet safety standards regarding the risk of dust
explosion or fire (methane, coal dust explosion) in underground coal mines.
Hoses designed for mining should be sufficiently:
- anti-electrostatic (prevention of explosion and ignition)
- fire-resistant (prevention of ignition, explosion and spreading of fire)
- non-toxic thermal decomposition products
Apart from the above safety issues, there may also be a requirement for the increased abrasion resistance of the
external rubber layer.
There are institutions in each country that confirm, through certificates, approvals and permits, the fulfilment of
safety requirements for mining. Among others, the certificates given by or according to:
- WUG, KOMAG and other accredited units (Poland),
- DSK (LOBA) (Germany),
- MakNII (Ukraine),
- GOST-R (Russia),
- MSHA - Mine Safety and Health Administration (USA),
- FRAS - Fire Resistant Anti Static, Flame Retardant Anti Static (Australia).
The requirements for hoses used in mining are dissimilar in different countries as they refer to distinct standards,
methods and tests criteria, e.g. fire resistance. The requirements of Polish mining supervision are the most stringent.
The hoses approved for mine application are usually permanently marked with: name of an institution (standard)
and approval (certificate) number that allows the use of the hose for a particular purpose.
We assemble and supply hydraulic hoses with STECKO fittings approved for use in mines and zones
with the potential hazard of methane and/or coal dust explosion.
Attention! STECKO mining type fittings - see HIGH PRESSURE chapter, section - fittings.
692

EN 853 TA 2SN
Internal layer:
Reinforcement:
External layer:
Working temp.:

Characteristics: Hydraulic hose designed for mining applications. The external layer is antistatic, non-toxic and
fire-resistant. Certified by the Central Mining Institute for B safety mark. Approved by MSHA,
GOST-R, MakNII.
Standards:
EN853-2SN [TA].
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-2SN/G-06
HW-2SN/G-08
HW-2SN/G-10
HW-2SN/G-13
HW-2SN/G-16
HW-2SN/G-19
HW-2SN/G-25
HW-2SN/G-32
6,4
7,9
9,5
12,7
15,9
19
25,4
31,8
14,7
16,3
18,7
21,8
25
29
36,8
47
working
pressure
[bar]
400
350
330
275
250
215
165
125
bursting
pressure
[bar]
1600
1400
1320
1100
1000
860
660
500
bending
radius
[mm]
100
115
130
180
200
240
300
420
weight
[kg/m]
0,36
0,41
0,51
0,67
0,79
1,01
1,46
2,04
ROCKMASTER 2SN
Internal layer:
Reinforcement:
External layer:
Working temp.:

fire-resistant. Approved by WUG, GOST-R, LOBA.
Standards:
EN853-2SN, ISO 1436-2SN/R2AT, SAE 100R2AT.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MA-RMASTER2SN-06
MA-RMASTER2SN-08
MA-RMASTER2SN-10
MA-RMASTER2SN-13
MA-RMASTER2SN-16
MA-RMASTER2SN-19
MA-RMASTER2SN-25
MA-RMASTER2SN-32
MA-RMASTER2SN-38
MA-RMASTER2SN-51
6,4
7,9
9,5
12,7
15,9
19
25,4
31,8
38,1
50,8
14,7
16,3
18,7
21,8
25
29
36,8
47
53,4
66,2
working
pressure
[bar]
400
350
350
350
250
215
175
140
100
90
bursting
pressure
[bar]
1750
1480
1400
1400
1020
900
670
600
500
420
bending
radius
[mm]
50
60
70
89
100
130
160
419
500
630
weight
[kg/m]
0,36
0,40
0,51
0,64
0,71
0,95
1,31
1,94
2,25
3,09
693

ROCKMASTER 4SP
Internal layer:
Reinforcement:
External layer:
Working temp.:

fire-resistant. Service life: 1,000,000 bending cycles min.
Approved by WUG, GOST-R, LOBA.
Standards:
Exceeds the requirements of EN856 4SP, ISO 3862-1 4SP.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MA-RMASTER4SP-06
MA-RMASTER4SP-10
MA-RMASTER4SP-13
MA-RMASTER4SP-16
MA-RMASTER4SP-19
MA-RMASTER4SP-25
MA-RMASTER4SP-32
MA-RMASTER4SP-38
MA-RMASTER4SP-51
6,4
9,5
12,7
15,9
19
25,4
31,8
38,1
50,8
17,8
21,3
24,4
28,1
32
39
49,9
57
70,8
working
pressure
[bar]
500
460
425
400
380
320
210
185
175
bursting
pressure
[bar]
2400
2100
1900
1600
1600
1400
1250
1000
1000
bending
radius
[mm]
100
110
120
140
170
340
460
560
660
weight
[kg/m]
0,60
0,75
0,90
1,10
1,48
1,91
3,01
3,61
5,27
ROCKMASTER 4SH
Internal layer:
Reinforcement:
External layer:
Working temp.:

fire-resistant. Service life: 1,000,000 bending cycles min. Approved by WUG, GOST-R, LOBA.
Standards:
Exceeds the requirements of EN856 4SH, ISO 3862-1 4SH.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MA-RMASTER4SH-19
MA-RMASTER4SH-25
MA-RMASTER4SH-32
MA-RMASTER4SH-38
MA-RMASTER4SH-51
19
25,4
31,8
38,1
50,8
32
38,1
45,2
53,5
68
694
working
pressure
[bar]
420
385
350
300
250
bursting
pressure
[bar]
1750
1750
1400
1250
1000
bending
radius
[mm]
210
220
420
560
700
weight
[kg/m]
1,51
2,04
2,46
3,29
4,54

ROCKMASTER R13
Internal layer:
Reinforcement:
External layer:
Working temp.:

Standards:
Exceeds the requirements of EN856 R13, ISO 3862-1 R13, SAE 100 R13.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MA-RMASTER13-19
MA-RMASTER13-25
MA-RMASTER13-32
MA-RMASTER13-38
MA-RMASTER13-51
19
25,4
31,8
38,1
50,8
32
39,2
49
57,8
72
working
pressure
[bar]
350
350
350
350
350
bursting
pressure
[bar]
1950
1650
1500
1600
1500
bending
radius
[mm]
240
300
420
500
630
weight
[kg/m]
1,64
2,20
3,31
4,76
6,83
ROCKMASTER R15
Internal layer:
Working temp.: (with peaks up to +125C)
Standards:
Exceeds the requirements of EN856 R15, ISO 3862-1 R15, SAE 100 R15.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MA-RMASTER15-19
MA-RMASTER15-25
MA-RMASTER15-32
MA-RMASTER15-38
19
25,4
31,8
38,1
32
38,1
49,5
57,8
working
pressure
[bar]
420
420
420
420
bursting
pressure
[bar]
1750
1750
1680
1680
bending
radius
[mm]
265
267
267
315
weight
[kg/m]
1,51
2,04
3,67
4,76
695

Thermoplastic hoses
Thermoplastic hoses - medium and high pressure hoses made of thermoplastic polymers (most often of polyester,
polyamide, polyurethane) with one or two textile or steel wire braids as reinforcement.
Features of thermoplastic hose:
- very low weight (even up to 60% lighter than rubber hoses),
- compact structure (small outside diameter in proportion to the internal one),
- small bending radius,
- good chemical resistance of the internal layer to hydraulic oil and chemicals,
- very smooth internal layer hardly affects flow rate,
- resistant to ageing, ozone and ultraviolet radiation.
The external layer is usually made of abrasion resistant polyurethane.
When the material of the internal layer is considered, general purpose thermoplastic hoses can be divided into
the following:
material
main application
polyester
hydraulic oil
polyamide
solvent, paint
other application
air, gases, fuel, water-based fluids,
chemicals
water-based fluids, isocyanate, polyol,
air, gases, hydraulic oil
It is recommended to confirm the application of a hose for a particular medium with Technical Department of
Standards:
Some types of thermoplastic hoses are standardized. Standards usually applied: SAE J517 (specifies SAE 100R7
and SAE 100R8 hoses), DIN 24951, ISO 3949 and EN 855. These standards define two types of hoses: with two
textile braids (R7) and with two aramid fibre braids (R8).
Application:
- oil hydraulics,
- painting (airless paint sprayers),
- compressed air and gases,
- chemicals,
- water blasting.
Pinpricking of the external layer:
Over longer operation time gas particles start to penetrate the hose wall causing blisters or bubbles. Pinpricks small holes in the external layer of the hose prevent this process. It is particularly recommended to pinprick the
hoses for high pressure gas transfer and the area next to the fittings. Pinpricking is factory-made or when complete
hose assemblies are made.
Static electricity:
If it is necessary for particular application to convey electrical charges away from the hose (hoses for paint, organic
solvents, hoses with high flow rates), the choice of the hose with a metal braid or additional conductor (conductive
fibre in a braid, etc.) is recommended. The fittings must be mounted in such a way so as to obtain electrical
continuity of the assembly.
Twin and multiple hoses:
A twin version of thermoplastic hoses (two hoses with external layers welded together) is frequently used in forklift trucks, hydraulic installations of machine tools or process lines and in many other applications. A multiple hose
version (three or four pieces, etc.) is available on request.
Assembly:
The thermoplastic hoses require Z type fittings for high pressure hoses (crimped with crimping machine).
In some cases reusable S type fittings can be used. Ultra high pressure hoses (about 700 bar) should be crimped
with special kind of fittings (see HIGH PRESSURE chapter - UHP equipment section).
696

Table for initial thermoplastic hose selection
for hydraulic oil installations, gases, air, fuels,
water - based fluids (internal layer - polyester)
max.
working
pressure
[bar]
nominal diameter DN [mm, inch]

3
10
13
16
19
26
1/8
5/32
3/16
1/4
5/16
3/8
1/2
5/8
3/4
700800
see HIGH PRESSURE chapter - UHP accessories section
450500
FK0100
FK0100
400450
FK0100
350400
300350
F0220
OL8
250300
200250
150200
100150
50100
OL7
OL5
OL7
F0200
OL5
R7
OL5
FK0100
MTKH
F0220
F0220
OL8
MTH1
OL8
FM040
FM040
MTH1
F0200
OL7
FP17010
R7
R18
OL7M
F0200
R7
R18
OL7M
MTH1
FM040
R18
OL7M
MTH1
FM040
R18
F0220
OL8
OL7M
R18
FK0100
R18
MTKH
OL7
FP17010
F0200
OL7
OL5M
FP17010
R7
F0200
OL7
FP17010
R7
FM040
MTH1
F0200
F0220
OL8
FK0100
OL8
F0220
FK0100
OL7
R7
MTH1
FM040
F0200
OL7
R7
MTH1
FM040
F0200
OL8
F0220
MTH1
OL7
R7
FM040
F0200
OL7
R7
OL5
F0080
F0080
OL5
MTKH
F0220
OL8
FK0100
F0220
OL8
F0080
OL5
F0080
OL5
OL5
The maximum working pressure of a particular hose type (the one given in the catalogue) is in a pressure range in
the table above. When selecting a hose for the particular diameter and maximum working pressure it is recommended
to read out a suitable hose type, find the precise maximum working pressure in the hose description and consider all
additional factors such as: medium, temperature, bending radius, vibrations and dynamic bending, electrical conductivity
or antistatic properties, pinpricking of the external layer (for gases and air) and external working conditions of the hose.
AS FAST AS IT IS POSSIBLE !!!

We assemble and supply complete
thermoplastic hose assemblies according
to customer specifications.
697

Thermoplastic hoses - polyester
F 0080
Internal layer: Polyester

External layer: Polyurethane, resistant to abrasion,
pinpricked
Characteristics: Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, water-based
fluids.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MC-F0080B-05
MC-F0080C-06
MC-F0080D-08
MC-F0080E-10
5
6,6
8
9,7
8,3
11,4
13,4
15,5
working
pressure
[bar]
130
130
120
120
OL 5
bursting
pressure
[bar]
520
520
480
480
Internal layer:
Reinforcement:
External layer:
Working temp.:
bending
radius
[mm]
30
40
50
60
weight
[kg/100 m]
4,50
8,00
10,00
13,00
Polyester
Polyester braid
Polyurethane, resistant to abrasion
fluids. A pinpricked version is available on request (for gases and air).
Assembly:
698
code
I.D.
[mm]
O.D.
[mm]
ZC-OL5-03
ZC-OL5-04
ZC-OL5-04/8,3
ZC-OL5-04/8,6
ZC-OL5-05
ZC-OL5-06
ZC-OL5-08
ZC-OL5M-08
ZC-OL5-10
ZC-OL5-13
3,5
4
4
4
4,8
6,4
8
8
9,7
13
7,5
8
8,3
8,6
9,2
10,8
13
13,7
14,8
18,7
working
pressure
[bar]
200
200
210
210
200
145
120
180
115
80
bursting
pressure
[bar]
800
800
840
840
800
580
480
540
460
320
bending
radius
[mm]
25
30
30
30
30
45
50
45
55
90
weight
[kg/100 m]
3,70
4,50
4,80
4,80
5,90
7,00
8,70
11,30
11,40
16,90

FP 17010 / FP 27010
Internal layer:
Reinforcement:
External layer:
Working temp.:
Polyester
Two polyester braids
Polyurethane, pinpricked
Characteristics: Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, chemicals
and water-based fluids.
Standards:
SAE 100R7, ISO 3949-1.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MC-FP17010B-05
MC-FP17010C-06*
MC-FP17010D-08*
MC-FP17010E-10*
5
6,6
8
9,7
9,3
11,8
14,2
16
working
pressure
[bar]
207
190
172
155
bursting
pressure
[bar]
830
760
690
620
bending
radius
[mm]
30
40
50
70
weight
[kg/100 m]
5,70
8,50
12,90
15,00
* - a twin version available, code example: MC-FP27010C-06
R7 ANTIABRASION
Internal layer:
Reinforcement:
External layer:
Working temp.:
Polyester
One or two polyester braids
Polyurethane, pinpricked
Characteristics: Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, chemicals
and water-based fluids.
Standards:
SAE 100R7.
Assembly:
Use Z type fittings (IT 87).
code
I.D.
[mm]
O.D.
[mm]
TO-R7-04
TO-R7-05
TO-R7-06
TO-R7-08
TO-R7-10
TO-R7-13
TO-R7-16
TO-R7-19
TO-R7-25
4
5
6,5
8,1
9,7
13
16,3
19,5
25,9
8,3
9,6
12,2
14,3
16
20,3
23,7
27,1
34
working
pressure
[bar]
210
210
210
190
160
140
105
90
70
bursting
pressure
[bar]
840
840
840
760
640
560
420
360
280
bending
radius
[mm]
25
25
35
45
55
75
110
140
190
weight
[kg/100 m]
4,50
6,00
10,00
13,00
14,50
22,00
28,00
33,50
45,50
699

OL 7 / OLB 7
Internal layer:
Reinforcement:
External layer:
Working temp.:
Polyester
Standards:
SAE 100R7, EN 855, ISO 3949 (OL7M exceeds SAE 100R7).
Assembly:
code
ZC-OL7-03
ZC-OL7-04
ZC-OL7-05*
ZC-OL7-06*
ZC-OL7M-06
ZC-OL7-08*
ZC-OL7M-08
ZC-OL7-10*
ZC-OL7M-10
ZC-OL7-13*
ZC-OL7M-13
ZC-OL7-16
ZC-OL7-19
ZC-OL7-25
I.D.
[mm]
O.D.
[mm]
3,5
4
4,8
6,4
6,4
8
8
9,7
9,7
13
13
16
19,2
25,6
8,5
8,9
10
11,8
12,7
14,3
15
16
18
20,3
22,8
23,5
26,5
32,5
working
pressure
[bar]
230
250
210
200
250
190
250
175
250
140
210
105
90
70
bursting
pressure
[bar]
920
1000
840
800
1000
760
1000
700
1000
560
840
420
360
280
bending
radius
[mm]
25
25
30
35
40
45
50
55
50
75
70
120
145
200
weight
[kg/100 m]
5,70
5,80
7,30
9,00
10,70
12,80
15,00
15,50
20,50
21,90
31,30
27,70
33,00
40,30
* - twin version available, code example: ZC-OLB7-05
R18 CPLT

Reinforcement: One or two polyester braids
pinpricked
fluids. Resistant to very low temperatures.
Standards:
Exceeds SAE 100R18.
Assembly:
Use Z type fittings (IT-106)..
code
I.D.
[mm]
O.D.
[mm]
TO-R18 CPLT-05
TO-R18 CPLT-06
TO-R18 CPLT-08
TO-R18 CPLT-10
TO-R18 CPLT-13
TO-R18 CPLT-16
5
6,5
8,1
9,7
13
16,3
9,6
12,2
14,3
16,6
22,5
26,1
700
working
pressure
[bar]
210
210
210
210
210
210
bursting
pressure
[bar]
840
840
840
840
840
840
bending
radius
[mm]
25
35
45
45
70
100
weight
[kg/100 m]
6,00
9,50
13,00
16,50
29,50
37,00

F 0200 / F 2200

Reinforcement: Two polyester braids
pinpricked
Characteristics: Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels and waterbased fluids.
Standards:
Exceeds DIN 24951, SAE 100R7, ISO 3949-1.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MC-F0200A-04
MC-F0200B-05
MC-F0200C-06*
MC-F0200D-08*
MC-F0200E-10*
MC-F0200F-13*
MC-F0200G-16
MC-F0200H-19
MC-F0200I-26
4
5
6,6
8
9,7
13
16,4
19,5
26
8,3
9,3
12,5
14,3
16,5
20,5
24
27,5
34,2
working
pressure
[bar]
235
220
215
195
187
157
130
105
77
bursting
pressure
[bar]
950
880
860
780
750
630
520
420
310
bending
radius
[mm]
20
26
30
40
70
90
130
150
180
weight
[kg/100 m]
4,90
6,30
10,60
13,00
16,60
23,00
27,60
34,20
43,30
* - twin version available, code example: MC-F2200C-06.
OL 8 / OLB 8
Internal layer:
Reinforcement:
External layer:
Working temp.:
Polyester
Two aramid fibre braids
Characteristics: Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels and waterbased fluids. A pinpricked version is available on request (for gases and air).
Standards:
SAE 100R8, EN 855, ISO 3949.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
ZC-OL8-03
ZC-OL8-05*
ZC-OL8-06*
ZC-OL8-08*
ZC-OL8-10*
ZC-OL8-13*
ZC-OL8-16
ZC-OL8-19
ZC-OL8-25
3,5
4,8
6,4
8
9,7
13
16
19,2
25,6
7,1
10
11,8
14,3
16
20,3
23,5
26,5
34,7
working
pressure
[bar]
420
350
350
325
280
245
195
165
145
bursting
pressure
[bar]
1680
1400
1400
1300
1120
980
780
660
580
bending
radius
[mm]
30
35
50
60
70
95
125
150
200
weight
[kg/100 m]
3,70
7,20
8,50
12,60
14,60
22,50
26,50
35,20
50,50
* - twin version available, code example: ZC-OLB8-06.
701

F 0220 / F 2220

Reinforcement: One or two aramid fibre braids
pinpricked
fluids.
Standards:
Exceeds SAE 100R8, ISO 3949-2.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MC-F0220A-04
MC-F0220B-05
MC-F0220C-06*
MC-F0220D-08*
MC-F0220E-10*
MC-F0220F-13*
MC-F0220G-16
MC-F0220H-19
MC-F0220I-26
4
5
6,6
8
9,7
13
16,4
19,5
26
8,3
9,3
12,5
14,3
16,5
20,5
24
27,5
34,2
working
pressure
[bar]
362
362
362
350
300
250
200
162
140
bursting
pressure
[bar]
1450
1450
1450
1400
1200
1000
800
650
560
bending
radius
[mm]
15
22
30
40
70
90
130
150
190
weight
[kg/100 m]
5,00
7,00
10,50
12,60
14,80
22,70
27,70
34,00
48,00
* - twin version available, code example: MC-F2220C-06.
FM 040 / FM 240

pinpricked
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MC-FM040B-05
MC-FM040C-06*
MC-FM040D-08*
MC-FM040E-10*
MC-FM040F-13*
MC-FM040G-16
MC-FM040H-19
MC-FM040I-26
5
6,6
8
9,9
13
16,4
19,5
26
9,3
12
13,5
15,5
18,5
23
26,5
32
* - twin version available, code example: MC-FM240C-06.
702
working
pressure
[bar]
330
300
215
215
180
145
120
97
bursting
pressure
[bar]
1320
1200
860
860
720
580
480
390
bending
radius
[mm]
20
35
40
60
70
110
150
170
weight
[kg/100 m]
10,00
16,80
19,00
24,90
31,40
40,10
46,00
60,00

MTH 1 / MTBH 1
Internal layer:
Reinforcement:
External layer:
Working temp.:
Polyester
Characteristics: Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels and waterbased fluids. A pinpricked version is available on request (for gases and air).
Assembly:
code
I.D.
[mm]
O.D.
[mm]
ZC-MTH1-05*
ZC-MTH1-06*
ZC-MTH1-08*
ZC-MTH1-10*
ZC-MTH1-13*
ZC-MTH1-16
ZC-MTH1-19
ZC-MTH1-25
4,8
6,4
8
9,7
13
16,3
19,2
25,6
10
11,9
14
16
19,2
23,3
26,5
32,5
working
pressure
[bar]
325
300
240
225
190
150
130
105
bursting
pressure
[bar]
1300
1200
960
900
760
600
520
420
bending
radius
[mm]
30
40
50
60
75
110
150
185
weight
[kg/100 m]
13,30
17,00
22,10
26,00
32,60
41,20
45,40
59,00
* - twin version available, code example: ZC-MTBH1-06.
FK 0100 / FK 2100

Reinforcement: One aramid fibre braid
+ one steel wire braid
pinpricked
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MC-FK0100B-05
MC-FK0100C-06*
MC-FK0100D-08*
MC-FK0100E-10*
MC-FK0100F-13*
MC-FK0100G-16*
MC-FK0100H-19*
MC-FK0100I-26*
5
6,6
8
9,8
13
16,4
19,5
26
11,2
13,2
15,2
18,5
21,5
24,5
28
35
working
pressure
[bar]
500
500
450
425
350
225
200
175
bursting
pressure
[bar]
2000
2000
1800
1700
1400
900
800
700
bending
radius
[mm]
30
40
50
80
90
100
130
150
weight
[kg/100 m]
14,50
19,60
23,20
34,20
38,00
45,30
51,20
68,00
* - twin version available, code example: MC-FK2100C-06.
703

MTKH / MTKHB

External layer: Polyurethane, resistant to abrasion
Assembly:
code
I.D.
[mm]
O.D.
[mm]
ZC-MTKH-10*
ZC-MTKH-13*
ZC-MTKH-19
9,5
13
19,2
18
22
28,2
working
pressure
[bar]
425
375
225
bursting
pressure
[bar]
1700
1500
900
bending
radius
[mm]
60
75
150
weight
[kg/100 m]
34,40
46,00
65,90
* - twin version available, code example: ZC-MTKHB-06.
OL 7 MARINE
Internal layer:
Reinforcement:
External layer:
Working temp.:
Polyester
fluids. Resistant to seawater. Flexible even at low temperatures.
Standards:
SAE 100R7, EN 855, ISO 3949.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
ZC-OL7MARINE-03
ZC-OL7MARINE-04
ZC-OL7MARINE-05
ZC-OL7MARINE-06
ZC-OL7MARINE-08
ZC-OL7MARINE-10
ZC-OL7MARINE-13
ZC-OL7MARINE-16
ZC-OL7MARINE-19
ZC-OL7MARINE-25
3,5
4
4,8
6,4
8
9,7
13
16
19,2
25,6
8,5
8,9
10
11,8
14,3
16
20,3
23,5
26,5
32,5
working
pressure
[bar]
230
250
210
200
190
175
140
105
90
70
Other standard hoses are available in MARINE version as well.
704
bursting
pressure
[bar]
920
1000
840
800
760
700
560
420
360
280
bending
radius
[mm]
25
25
30
35
45
55
75
120
145
200
weight
[kg/100 m]
5,70
5,80
7,30
9,00
12,80
15,50
21,90
27,70
33,00
40,30

FP 17100 MARINE

pinpricked
Characteristics: Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, chemicals,
water-based fluids. Resistant to seawater.
Standards:
SAE 100R7, ISO 3949-1.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MC-FP17100B-05
MC-FP17100C-06
MC-FP17100D-08
MC-FP17100E-10
5
6,6
8
9,7
9,3
11,8
14,2
16
working
pressure
[bar]
208
190
173
155
bursting
pressure
[bar]
830
760
690
620
bending
radius
[mm]
30
40
50
70
weight
[kg/100 m]
5,50
8,50
12,50
14,40
Other standard hoses are available in a MARINE version as well.
OL 7 NON CONDUCTIVE

External layer: Orange polyurethane,
Characteristics: Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels and waterbased fluids. Used near electrical transformers, medium and high voltage installations. Nonconductive - a leakage current in test conditions according to the standard, lower than 50 A
at 246 kV/m voltage for 5 min.
Standards:
SAE 100R7, EN 855, ISO 3949.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
ZC-OL7NC-03
ZC-OL7NC-04
ZC-OL7NC-05
ZC-OL7NC-06
ZC-OL7NC-08
ZC-OL7NC-10
ZC-OL7NC-13
ZC-OL7NC-16
ZC-OL7NC-19
ZC-OL7NC-25
3,5
4
4,8
6,4
8
9,7
13
16
19,2
25,6
8,5
8,9
10
11,8
14,3
16
20,3
23,5
26,5
32,5
working
pressure
[bar]
230
250
210
200
190
175
140
105
90
70
bursting
pressure
[bar]
920
1000
840
800
760
700
560
420
360
280
bending
radius
[mm]
25
25
30
35
45
55
75
120
145
200
weight
[kg/100 m]
5,70
5,80
7,30
9,00
12,80
15,50
21,90
27,70
33,00
40,30
Other standard hoses are available in NON-CONDUCTIVE version as well.
705

FP 17051 NON CONDUCTIVE

External layer: Orange polyurethane,
Characteristics: Lightweight, flexible hose designed for hydraulic oil installations, gases, air, fuels, chemicals and
water-based fluids. Used near electrical transformers, medium and high voltage installations.
Non-conductive - a leakage current in test conditions according to the standard, lower than
50 A at 246 kV/m voltage for 5 min.
Standards:
Exceeds SAE 100R7, DIN 24951, ISO 3949-1.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MC-FP17051B-05
MC-FP17051C-06
MC-FP17051D-08
MC-FP17051E-10
MC-FP17051F-13
5
6,6
8
9,7
13
9,3
12,5
14,3
16,5
20,5
working
pressure
[bar]
220
215
195
187
157
bursting
pressure
[bar]
880
860
780
750
630
bending
radius
[mm]
26
30
40
70
90
weight
[kg/100 m]
6,30
10,60
12,50
16,60
21,80
AT 7 ATOXIC

pinpricked
Characteristics: Lightweight, flexible hose designed for gases, air and fluids. The non-toxic internal layer can
come into contact with food. Once the fittings are assembled, the hose should be sterilized. Not
suitable for medical, pharmaceutical application and food fluids with alcohol content.
Standards:
SAE 100R7, EN 855, ISO 3949.
Assembly:
706
code
I.D.
[mm]
O.D.
[mm]
ZC-AT7-03
ZC-AT7-04
ZC-AT7-05
ZC-AT7-06
ZC-AT7-08
ZC-AT7-10
ZC-AT7-13
ZC-AT7-16
ZC-AT7-19
ZC-AT7-25
3,5
4
4,8
6,4
8
9,7
13
16
19,2
25,6
8,5
8,9
10
11,8
14,3
16
20,3
23,5
26,5
32,5
working
pressure
[bar]
230
250
210
200
190
175
140
105
90
70
bursting
pressure
[bar]
920
1000
840
800
760
700
560
420
360
280
bending
radius
[mm]
30
35
35
50
55
75
95
125
150
200
weight
[kg/100 m]
5,70
5,80
7,30
9,00
12,80
15,50
22,40
27,70
33,00
40,30

050 CO2

pinpricked
Characteristics: Hose designed for CO2 installations in industrial and marine fire extinguishing systems.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
TO-050CO2-05
TO-050CO2-06
TO-050CO2-08
TO-050CO2-10
TO-050CO2-13
TO-050CO2-16
5
6,4
8,1
9,8
13
16,3
9,7
11,6
13,2
15,5
18,8
22
working
pressure
[bar]
300
275
212
212
175
140
bursting
pressure
[bar]
1200
1100
850
850
700
560
bending
radius
[mm]
30
40
55
65
85
115
weight
[kg/100 m]
12,00
15,50
19,50
23,00
30,00
32,00
120 AIR CYLINDER FILLING

pinpricked
Characteristics: Hose designed for filling gas cylinders. The odourless internal layer meets the requirements
of FDA and CGA G-7.1-2004 (for breathing air). Not suitable for explosive gases e.g. oxygen,
hydrogen.
Assembly:
Use Z type fittings.
code
I.D.
[mm]
O.D.
[mm]
TO-120ACF-05
TO-120ACF-06
5
6,5
9,6
12,1
working
pressure
[bar]
420
420
bursting
pressure
[bar]
1680
1680
bending
radius
[mm]
30
50
weight
[kg/100 m]
6,50
9,50
707

140 BEVERAGE DISPENSING

Reinforcement: 140A - two synthetic fibre braids
140B - steel wire braid
140C - aramid fibre braid
pinpricked
Characteristics: Hose designed for carbon dioxide, nitrogen, mixed gases. Primarily intended for beverage
dispensers e.g. for beer, juice. The odourless internal layer meets the requirements of FDA.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
TO-140BD-A-06
TO-140BD-B-06
TO-140BD-C-06
6,5
6,4
6,5
12,2
11,6
11,5
708
working
pressure
[bar]
210
300
350
bursting
pressure
[bar]
840
1200
1400
bending
radius
[mm]
35
40
50
weight
[kg/100 m]
10,00
15,50
9,00

Table for initial thermoplastic hose selection
for paint, solvent, isocyanate, polyol, water-based fluids,
hydraulic oil (internal layer - polyamide)
max.
working
pressure
[bar]
nominal diameter DN [mm, inch]

3
10
13
16
19
26
1/8
5/32
3/16
1/4
5/16
3/8
1/2
5/8
3/4
700800
see HIGH PRESSURES chapter, section - UHP accessories

SK0100*
MTK
450500
SK0100*
400450
MTK*
SK0100*
SK0100*
MTK*
VE8
S0230
MT2*
S0230
MT1*
VE8
AS8**
MT1*
VE8
AS8**
250300
SM040
MT1*
SM040
200250
VE7
S0190
AS7**
S0190
VE7
VE7M
AS7**
S0190
MT1*
SM040*
AS7**
MT1*
SM040*
MT2*
S0230
VE8
AS8**
MTK*
SK0100*
MTK*
150200
VE5
VE5
VE5
VE7
S0190
VE7
AS7**
S0190
VE7
SM040*
MT1*
S0190
VE8
MT2*
SK0100*
VE8
MT2*
MTK*
SK0100*
S0090
S0090
VE5
S0090
VE5
S0090
VE5
VE7
AS7**
MT1*
SM040*
S0190
VE7
AS7**
MT1*
SM040*
S0190
MT2*
VE8
MT1*
VE7
AS7**
SM040*
S0190
VE7
AS7**
350400
300350
100150
50100
MTK*
S0230
VE8
AS8**
MT2*
SK0100*
MT2*
S0230
VE8
AS8**
VE5
The maximum working pressure of a particular hose type (the one given in the catalogue) is in a pressure range in the
table above. When selecting a hose for the particular diameter and maximum working pressure it is recommended
to read out a suitable hose type, find the precise maximum working pressure in the hose description and consider
all additional factors such as: medium, temperature, bending radius, vibrations and dynamic bending, electrical
conductivity or antistatic properties, pinpricking of the external layer (for gases and air) and external working
conditions of the hose.
Symbols:
* - hose with a metal braid
** - hose with conductive fibre in a braid
709

Thermoplastic hoses - polyamide
S 0090
Internal layer: Polyamide

pinpricked
Characteristics: Lightweight, flexible hose designed for water-based fluids, solvents, paints and hydraulic oil.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MC-S0090B-05
MC-S0090C-06
MC-S0090D-08
MC-S0090E-10
5
6,6
8
9,7
8,3
11,4
13,4
15,5
working
pressure
[bar]
130
130
120
120
VE 5
bursting
pressure
[bar]
520
520
480
480
Internal layer:
Reinforcement:
External layer:
Working temp.:
bending
radius
[mm]
30
40
50
60
weight
[kg/100 m]
4,50
7,50
10,00
12,40
Polyamide
Polyester braid
Characteristics: Lightweight, flexible hose designed for isocyanate, polyol, solvents and paint. A pinpricked
version is available on request (for gas and air).
Assembly:
710
code
I.D.
[mm]
O.D.
[mm]
ZC-VE5-03
ZC-VE5-04
ZC-VE5-05
ZC-VE5-06
ZC-VE5-08
ZC-VE5-10
ZC-VE5-13
3,5
4
4,8
6,4
8
9,7
13
7,5
8
9,2
10,8
13
14,8
18,7
working
pressure
[bar]
200
200
200
145
120
115
80
bursting
pressure
[bar]
800
800
800
580
480
460
320
bending
radius
[mm]
25
25
30
45
50
55
90
weight
[kg/100 m]
3,60
4,10
5,60
6,50
9,40
11,50
15,70

VE 7
Internal layer:
Reinforcement:
External layer:
Working temp.:
Polyamide
Characteristics: Lightweight, flexible hose designed for isocyanate, polyols, solvents and paints. A pinpricked
version is available on request (for gases and air).
Standards:
SAE 100R7, EN 855, ISO 3949 (VE7M exceeds the requirements of SAE 100R7).
Assembly:
code
I.D.
[mm]
O.D.
[mm]
ZC-VE7-03
ZC-VE7-05
ZC-VE7-06
ZC-VE7M-06
ZC-VE7-08
ZC-VE7-10
ZC-VE7-13
ZC-VE7-16
ZC-VE7-19
ZC-VE7-25
3,5
4,8
6,4
6,4
8
9,7
13
16
19,2
25,6
8,5
10
11,8
12,7
14,3
16
20,3
23,5
26,5
32,5
working
pressure
[bar]
230
210
200
250
190
175
140
105
90
70
bursting
pressure
[bar]
920
840
800
1000
760
700
560
420
360
280
bending
radius
[mm]
25
30
35
40
45
55
75
120
145
200
weight
[kg/100 m]
5,40
6,80
8,70
10,50
12,60
14,60
21,90
25,80
30,10
36,90
AS 7 CONDUCTIVE

with conductive fibre
Characteristics: Lightweight, flexible, antistatic (R < 3x104 /m) hose designed for isocyanate, polyol, solvents
and paints. A pinpricked version is available on request (for gases and air).
Standards:
SAE 100R7, EN 855, ISO 3949.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
ZC-AS7-05
ZC-AS7-06
ZC-AS7-08
ZC-AS7-10
ZC-AS7-13
ZC-AS7-16
ZC-AS7-19
ZC-AS7-25
4,8
6,4
8
9,7
13
16
19,2
25,6
10,5
12,7
14,3
17,3
20,3
23,5
26,5
32,5
working
pressure
[bar]
250
228
190
228
140
105
90
70
bursting
pressure
[bar]
1000
912
760
912
560
420
360
280
bending
radius
[mm]
30
40
55
60
75
120
145
200
weight
[kg/100 m]
7,50
10,20
12,60
17,90
21,40
25,80
30,10
36,90
711

S 0190 / S 2190
Internal layer: Polyamide 11-12

pinpricked
Characteristics: Lightweight, flexible hose designed for water-based fluids, solvents, paints and hydraulic oil.
Standards:
Exceeds DIN 24951, SAE 100R7, ISO 3949-1.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MC-S0190A-04
MC-S0190B-05*
MC-S0190C-06*
MC-S0190D-08*
MC-S0190E-10*
MC-S0190F-13*
MC-S0190G-16
MC-S0190H-19
MC-S0190I-26
4
5
6,6
8
9,7
13
16,4
19,5
26
8,3
9,3
12,5
14,3
16,5
20,5
24
27,5
34,2
working
pressure
[bar]
235
220
215
195
187
157
130
105
77
bursting
pressure
[bar]
950
880
860
780
750
630
520
420
310
bending
radius
[mm]
20
26
30
40
70
90
130
150
180
weight
[kg/100 m]
5,00
5,70
10,10
13,00
15,00
21,80
28,00
34,00
48,00
* - twin version available, code example: MC-S2190C-06.
VE 8
Internal layer:
Reinforcement:
External layer:
Working temp.:
Polyamide
Two aramid fibre braids
Characteristics: Lightweight, flexible hose designed for isocyanates, polyols, solvents and paint. A pinpricked
Standards:
SAE 100R8, EN 855, ISO 3949.
Assembly:
712
code
I.D.
[mm]
O.D.
[mm]
ZC-VE8-03
ZC-VE8-05
ZC-VE8-06
ZC-VE8-08
ZC-VE8-10
ZC-VE8-13
ZC-VE8-16
ZC-VE8-19
ZC-VE8-25
3,5
4,8
6,4
8
9,7
13
16
19,2
25,6
7,1
10
11,8
14,3
16
20,3
23,5
26,5
34,7
working
pressure
[bar]
420
350
350
325
280
245
195
165
145
bursting
pressure
[bar]
1680
1400
1400
1300
1120
980
780
660
580
bending
radius
[mm]
30
35
50
60
70
95
125
150
200
weight
[kg/100 m]
3,10
8,80
8,30
12,20
14,00
21,80
28,50
34,10
47,50

AS 8 CONDUCTIVE

Reinforcement: Two aramid fibre braids
with conductive fibre
Characteristics: Lightweight, flexible, antistatic (R < 3x104 /m) hose designed for isocyanate, polyol, solvents
and paint. A pinpricked version is available on request (for gases and air).
Standards:
SAE 100R8, EN 855, ISO 3949.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
ZC-AS8-05
ZC-AS8-06
ZC-AS8-08
ZC-AS8-10
ZC-AS8-13
4,8
6,4
8
9,7
13
10
11,8
14,3
16,7
20,3
working
pressure
[bar]
350
350
325
280
245
bursting
pressure
[bar]
1400
1400
1300
1120
980
bending
radius
[mm]
35
50
60
70
95
weight
[kg/100 m]
8,80
10,20
12,20
16,80
21,80
S 0230 / S 2230

Reinforcement: Two aramid fibre braids
pinpricked
Characteristics: Lightweight, flexible hose designed for water-based fluids, solvents, paint and hydraulic oil.
A non-pinpricked version is available on request.
Standards:
Exceeds SAE 100R8, ISO 3949-2.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MC-S0230B-05
MC-S0230C-06*
MC-S0230D-08*
MC-S0230E-10*
MC-S0230F-13*
5
6,6
8
9,7
13
9,3
12,5
14,3
16,5
20,5
working
pressure
[bar]
362
362
350
300
250
bursting
pressure
[bar]
1450
1450
1400
1200
1000
bending
radius
[mm]
22
30
40
70
90
weight
[kg/100 m]
7,50
10,00
14,00
15,80
25,00
* - a twin version available, code example: MC-S2230C-06.
713

SM 040 / SM 240

pinpricked
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MC-SM040B-05
MC-SM040C-06*
MC-SM040D-08*
MC-SM040E-10*
MC-SM040F-13*
MC-SM040G-16
MC-SM040H-19
MC-SM040I-26
5
6,6
8
9,9
13
16,4
19,5
26
9,3
12
13,5
15,5
18,5
22
26,5
32
working
pressure
[bar]
287
275
215
215
180
145
120
97
bursting
pressure
[bar]
1150
1100
860
860
720
580
480
390
bending
radius
[mm]
20
35
40
60
70
110
150
170
weight
[kg/100 m]
10,70
16,80
19,50
25,00
30,00
34,50
46,00
60,00
* - a twin version available, code example: MC-SM240C-06.
MT 1 / MTB 1
Internal layer:
Reinforcement:
External layer:
Working temp.:
Polyamide
Polyurethane, resistant to abrasion,
Assembly:
code
I.D.
[mm]
O.D.
[mm]
ZC-MT1-03
ZC-MT1-05*
ZC-MT1-06*
ZC-MT1-08*
ZC-MT1-10*
ZC-MT1-13*
ZC-MT1-16
ZC-MT1-19
ZC-MT1-25
3,5
4,8
6,4
8
9,7
13
16,3
19,2
25,6
7,5
10
11,9
14
16
19,2
23,3
26,5
32,5
* - a twin version available, code example: ZC-MTB1-06.
714
working
pressure
[bar]
375
350
300
240
225
190
150
130
105
bursting
pressure
[bar]
1500
1400
1200
960
900
760
600
520
420
bending
radius
[mm]
30
30
40
50
60
75
110
150
185
weight
[kg/100 m]
7,60
13,10
16,50
20,50
25,30
31,40
40,60
44,70
59,00

MT 2 / MTB 2
Internal layer:
Reinforcement:
External layer:
Working temp.:
Polyamide
Assembly:
code
I.D.
[mm]
O.D.
[mm]
ZC-MT2-06*
ZC-MT2-08*
ZC-MT2-10*
ZC-MT2-13*
ZC-MT2-16
ZC-MT2-19
ZC-MT2-25
6,4
8
9,7
13
16,3
19,2
25,6
13,5
15,1
17
22
24,5
27,5
35
working
pressure
[bar]
400
350
330
275
250
215
165
bursting
pressure
[bar]
1600
1400
1320
1100
1000
860
660
bending
radius
[mm]
40
50
60
75
110
150
185
weight
[kg/100 m]
29,40
34,60
41,80
59,80
66,00
78,80
105,30
* - a twin version available, code example: ZC-MTB2-06.
SK 0100 / SK 2100

pinpricked
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MC-SK0100B-05
MC-SK0100C-06*
MC-SK0100D-08*
MC-SK0100E-10*
MC-SK0100F-13*
MC-SK0100G-16*
MC-SK0100H-19*
MC-SK0100I-26*
5
6,6
8
9,8
13
16,4
19,5
26
11,2
13,2
15,2
18,5
21,5
24,5
28
35
working
pressure
[bar]
500
500
450
425
350
225
200
175
bursting
pressure
[bar]
2000
2000
1800
1700
1400
900
800
700
bending
radius
[mm]
30
40
50
80
90
100
130
150
weight
[kg/100 m]
14,50
19,70
23,20
34,20
37,80
46,40
51,10
68,00
* - a twin version available, code example: ZC-MTKB-06.
715

MTK / MTKB

Assembly:
code
I.D.
[mm]
O.D.
[mm]
ZC-MTK-05*
ZC-MTK-08*
ZC-MTK-10*
ZC-MTK-13*
ZC-MTK-16
ZC-MTK-19
ZC-MTK-25
4,8
8
9,5
13
16
19,2
25,8
11,3
16
18
22
25
28,2
35,4
working
pressure
[bar]
500
500
425
375
250
225
200
bursting
pressure
[bar]
2000
2000
1700
1500
1000
900
800
bending
radius
[mm]
30
50
60
75
110
150
250
weight
[kg/100 m]
16,70
29,20
34,00
44,20
51,00
60,00
81,00
* - a twin version available, code example: ZC-MTKB-06.
159 CNG
Internal layer: Conductive polyamide + polyamide 12

Reinforcement: One or two aramid fibre braids
+ one synthetic fibre braid
pinpricked
Characteristics: Lightweight, flexible hose intended for natural gas (CNG - Compressed Natural Gas). Used for
filling the tanks of CNG vehicles. A twin version with a venting tube is available.
Assembly:
Use P type fittings (IT-98).
code
I.D.
[mm]
O.D.
[mm]
TO-159CNG-06
TO-159CNG-10
TO-159CNG-13
TO-159CNG-19
6,5
9,7
13
19,5
13,7
18,9
22,9
29,6
716
working
pressure
[bar]
350
350
350
350
bursting
pressure
[bar]
1400
1400
1400
1400
bending
radius
[mm]
50
70
90
180
weight
[kg/100 m]
12,00
22,00
29,00
40,00

Thermoplastic hoses (grease)
130 GREASING
Internal layer: Thermoplastic polymer

Reinforcement: Single synthetic fibre braid
External layer: Thermoplastic polymer
(for 130C TPU)
(for 130C from -20C up to +60C)
Characteristics: Lightweight, flexible hose for high pressure grease systems.
Assembly:
Use special fittings.
code
I.D.
[mm]
O.D.
[mm]
TO-130A-04
TO-130B-04
TO-130C-04
4,2
4,2
4
8,8
10,1
8,3
working
pressure
[bar]
400
400
400
EP 1C
bursting
pressure
[bar]
1000
1000
1000
Internal layer:
Reinforcement:
External layer:
Working temp.:
bending
radius
[mm]
35
35
25
weight
[kg/100 m]
6,00
9,00
5,00
Polyethylene compound
Polyurethane, resistant to abrasion,
Characteristics: Lightweight, flexible hose for high pressure grease systems.

Standards:
DIN 1283.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
MC-EP1C030A-04
MC-EP1C010B-05
MC-EP1C010C-06
4
5
6,6
7,6
9,3
11,8
working
pressure
[bar]
225
225
200
bursting
pressure
[bar]
900
900
800
bending
radius
[mm]
20
30
40
weight
[kg/100 m]
3,70
5,10
7,85
717

Thermoplastic hoses (grease)
GR 7 / GR 8
Internal layer:
Polyester (PEE), polyethylene (PE)

or polyamide (PA)
Reinforcement: Polyester braid (GR 7)
or aramid fibre braid (GR 8)
External layer: Synthetic rubber (PZ) or polyurethane
(PU) or polyamide (PA)
Characteristics: Lightweight, flexible hose designed for high pressure grease systems.
Standards:
DIN 1283 (hose marked with *).
Assembly:
code
ZC-GR7-H10846*
ZC-GR7-H10246*
ZC-GR7-H84000
ZC-GR7-H94000
ZC-GR7-PE8440
ZC-GR7-PE1084
ZC-GR7-PE1256
ZC-GR7-PE1460
ZC-GR8-H10846*
ZC-GR8-PA8243*
718
internal /
external
layer
PEE / PZ
PEE / PZ
PEE / PU
PEE / PU
PE / PU
PE / PU
PE / PZ
PE / PZ
PEE / PZ
PA / PA
I.D.
[mm]
O.D.
[mm]
4
4
4
4
4
4
5
6,6
4
4
10,8
10,2
8,1
9,1
8,4
10,8
12
14
10,8
8,2
working
pressure
[bar]
400
400
200
250
200
200
150
200
400
400
bursting
pressure
[bar]
1000
1000
800
1000
800
800
600
800
1500
1300
bending
radius
[mm]
35
35
35
40
35
35
40
65
35
35
weight
[kg/100 m]
9,70
7,90
4,50
6,00
4,50
8,00
11,00
14,00
9,50
4,20
HIGH PRESSURE - fittings

Proper selection and assembly of fittings is as important for safe and long-lasting operation of a hose assembly
as the selection of a hose itself. When choosing a fitting, not only working parameters of the hose assembly must
be taken into consideration (see section I - Intro ) but also the type of the hose they are meant for.
Fittings for high pressure hose assemblies:
There is a great number of fitting types used and manufactured worldwide. They meet the requirements of
international, domestic or a particular producers standards. All fittings are divided according to the way the
connecting side is finished (type of sealing, thread and size), but also the way the fittings are assembled on the
hose. Taking this into account, there are the following types:
- two-piece crimp fittings,
- one-piece (integral) crimp fittings,
- two-piece reusable fittings.
TUBES INTERNATIONAL supplies reusable and two-piece crimp fittings.
The two-piece crimp fittings are selected according to the type of a high pressure hose, following the technological
guidelines of the manufacturer or supplier. The types of fittings and ferrules as well as technological details of the
assembly process (hose preparation, crimp diameter) are given in the manuals.
Each type of a hydraulic hose requires special preparation of the hose end for a particular connector, different
fitting or ferrule.
assembly
hoses
non-skived
textile braid
thermoplastic
fittings
TI-Z
1SN / 2SN / 1SC / 2SC

4SP / 4SH / R13 / R15
ferrules
TI-L, MC-BP, MC-BX, ZC-BP

and others
TI-Z
TI-N
TI-N
external skiving
1ST / 2ST
TI-Z
4SP / 4SH
TI-M
external and internal skiving
4SH / R13 / R15
TI-IL
TI-IL
Fittings material:
Zinc-plated carbon steel or stainless steel (AISI 316 or AISI 304) as a standard. Sealing material (O-rings) - NBR
as a standard, Viton optional.
719

Fittings with imperial pipe thread
AGR
DKR
BSP thread, 60 cone sealing
DKOR
AGR-F
DKR - 60 cone, metal-metal sealing.

DKOR - 60 cone, sealing with O-ring.
DKR-F
BSP thread, flat sealing

Additional flat seal required.
AGR-K
BSPT thread, sealing on the thread

Additional sealant (PTFE type or anaerobic sealant) required. Possible sealing on 60 cone.
RNR
BANJO bolt with BSP thread

Sealing with the use of washers between fitting,
bolt head and connection surface.
AGN
NPT thread, sealing on thread

Additional sealant (PTFE type or anaerobic sealant) required. Possible sealing on 60 cone.
Fittings with imperial UNF thread
AGJ
DKJ
JIC, imperial UNF thread

74 cone, metal-metal sealing.
SAE 90, imperial UNF thread

ORFS, imperial UNF thread

Flat-face seal with O-ring
SAE, imperial UNF thread

O-ring sealing
720

Fittings with metric thread
DKOL (DKOS)
Metric thread - cone 24
CEL (CES)
BEL (BES)
DKL (DKS)
DKOL (DKOS) - Light (heavy) duty, 24 cone

with O-ring.
DKL (DKS) - light (heavy) duty - 24/60 cone,
metal-metal sealing.
CEL (CES) - light (heavy) duty - cone 24 sealing.
BEL (BES) - light (heavy) duty - sealing of cutting
ring
Metric thread - cone 60.
AGM
DKM - 60 cone, metal-metal sealing.

AGM - 60 cone, metal-metal sealing.
DKM
RNM
BANJO bolt with metric thread.

Sealing with the use of washers between fittings,
bolt head and connection surface.
Flanged fittings
Flanged SAE
* - JIS flange (KOMATSU)
Sealing of O-ring
flange size
[inch]
1/2
5/8*
3/4
1
1.1/4
1.1/2
2
2.1/2
3
3.1/2
4
5
light duty (3000 PSI)

D
30,2
34,0
38,1
44,5
50,8
60,3
71,4
84,1
101,6
114,3
127
152,4
H
6,7
6,7
6,7
8
8
8
9,5
9,6
9,6
11,3
11,3
11,3
d
17,5
19,8
22,2
26,2
30,2
35,7
42,9
50,8
61,9
69,9
77,8
92,1
h
38,1
42,9
47,6
52,4
58,7
69,8
77,8
88,9
106,4
120,7
130,2
152,4
heavy duty (6000 PSI)

D
31,8
41,3
47,6
54,0
63,5
79,5
-
H
7,8
8,8
9,5
10,3
12,6
12,6
-
d
18,2
23,8
27,8
31,8
36,5
44,5
-
h
40,5
50,8
57,2
66,7
79,4
96,8
-
SUPER CAT
D
31,8
41,3
47,6
54,0
63,5
79,5
-
H
14,2
14,2
14,2
14,2
14,2
14,2
-
d
23,8
27,8
31,8
-
h
50,8
57,2
66,7
-
721

Other endings
DKF
AGF
BEF
Metric thread, fitting according to

French standards :
DKF - 24 cone, metal-metal sealing.
AGF - 24 cone sealing.
BEF - sealing of cutting ring
JIS, metric thread (KOMATSU)
JIS, BSP thread (TOYOTA)
JIS, BSP thread (NISSAN)
STECK-O, plug ending

O-ring seal
Fitting according to customers specification
722

The codes of ferrules and hydraulic fittings and types of the fitting connecting part:
Ferrules and hydraulic fittings are marked with a code that facilitates its recognition:
a) The thread size of a fitting connecting part as well as hose size, which the fitting and ferrule are intended for,
is given in a sixteenth part of an inch - unit of measure is 1/16.
The most common marking:
thread size or
hose size
[inch]
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
for hose
I.D.
[mm]
3,2
4,8
6,4
7,9
9,5
12,7
15,9
19,1
25,4
31,8
38,1
50,8
DN
[mm]
3
5
6
8
10
12 (13)
16
19 (20)
25
32
38 (40)
50 (51)
size in a sixteenth part

of an inch
dash number
2/16
3/16
4/16
5/16
6/16
8/16
10/16
12/16
16/16
20/16
24/16
32/16
-02
-03
-04
-05
-06
-08
-10
-12
-16
-20
-24
-32
b) A code example of a straight BSP fitting with 3/8 female thread for 1/2 hose:

TI - ZBW110 - 06 - 08
TI
Z
B
W
1
10
-06
-08
- code group (TUBES INTERNATIONAL),

- standard fitting (Z), also: IL - for 4 and 6 spirals hoses - INTERLOCK system, S - reusable fitting,
- the end of a connection part - BSP thread, also: M - metric, J - JIC, S - SAE flange,
- female thread, also: Z - male thread, K - flange, etc.,
- straight fitting, also: 2 - 90 elbow, 3 - 45 elbow, 4, 5 and 6 - special,
- specific type of the connection part which describes a kind of sealing, etc.,
- thread size 3/8,
- hose size 1/2.
c) A code example of a ferrule for 1/2 hose according to SAE100R2AT (two braids, non-skived):

TI - Z2TX- 08
TI
Z
2TX
-08
- code group (TUBES INTERNATIONAL),

- standard ferrule (Z), also: M - for multispiral hoses, IL - for multispiral hoses - INTERLOCK system,
- particular hose type which the ferrule is intended for,
- hose size 1/2.
STAINLESS STEEL CONNECTORS

Most of fittings and ferrules, described in our catalogue, are available in stainless steel. Their codes require adding
SS suffix. During ordering or enquiry process the grade of stainless steel should be determined by the customer.
The most popular grades are AISI 304 and AISI 316 (see TECHNICAL INFORMATION at the end of the catalogue).
FITTINGS IDENTIFICATION
Information given in this catalogue enable correct identification of a fitting type and a thread size of a connector
(pipe stub, flange). The thread should be measured with a calliper and the number of threads per inch with a thread
pitch gauge. Having such data, any type of fitting can be identified with help of the table for thread identification in
TECHNICAL INFORMATION chapter at the end of the catalogue.
723

Standard fittings - Z type
Crimp ferrules for hydraulic rubber hoses
TI-Z STANDARD
Z1TX
Z2TX
hose I.D.
[inch]
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
code
TI-Z1TX-03
TI-Z1TX-04
TI-Z1TX-05
TI-Z1TX-06
TI-Z1TX-08
TI-Z1TX-10
TI-Z1TX-12
TI-Z1TX-16
TI-Z1TX-20
TI-Z1TX-24
TI-Z1TX-32
hose type
1SN(R1AT)
1SN(R1AT) / 2SC
1SN(R1AT)
code
TI-Z2TX-03
TI-Z2TX-04
TI-Z2TX-05
TI-Z2TX-06
TI-Z2TX-08
TI-Z2TX-10
TI-Z2TX-12
TI-Z2TX-16
TI-Z2TX-20
TI-Z2TX-24
TI-Z2TX-32
hose type
2SN(R2AT)
1SN(R1AT) / 2SN(R2AT)
2SN(R2AT)
TI-Z STANDARD
Z1TC
ZF12T
hose I.D.
[inch]
1/4
5/16
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
code
TI-Z1TC-04
TI-Z1TC-05
TI-Z1TC-06
TI-Z1TC-08
TI-Z1TC-10
TI-Z1TC-12
TI-Z1TC-16
hose type
1SC
code
TI-ZF12T-04SS
TI-ZF12T-05SS
TI-ZF12T-06SS
TI-ZF12T-08SS
TI-ZF12T-10SS
TI-ZF12T-12SS
TI-ZF12T-16SS
TI-ZF12T-20SS
TI-ZF12T-24SS
TI-ZF12T-32SS
hose type
1SN(R1AT) / 2SN(R2AT)
TI-M STANDARD
M9X
M4X
hose I.D.
[inch]
1/4
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
724
code
TI-M9X-04
TI-M9X-06
TI-M9X-08
TI-M9X-10
TI-M9X-12
TI-M9X-16
TI-M9X-20
TI-M9X-24
TI-M9X-32
hose type
code
hose type
TI-M4X-20
TI-M4X-24
TI-M4X-32
4SH
4SP
4SP
4SH
4SP

ZC-BP5
Crimp ferrule for thermoplastic hoses
hose I.D.
[inch]
ferrule I.D.
[mm]
1/8
5/32
3/16
1/4
5/16
3/8
1/2
7,8
8,6
9,8
11,1
13,8
15,1
19,1
code
ZC-BP5-02
ZC-BP5-025
ZC-BP5-03
ZC-BP5-04
ZC-BP5-05
ZC-BP5-06
ZC-BP5-08
ZC-BP7 / BP8
hose I.D.
[inch]
ferrule I.D.
[mm]
1/8
5/32
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1
9
9,3
10,7
12,4
15,4
17
21,5
24,2
27,1
33,1
55,5
hose type
OL5 / VE5
code
ZC-BP7-02
ZC-BP7-025
ZC-BP7-03
ZC-BP7-04
ZC-BP7-05
ZC-BP7-06
ZC-BP7-08
ZC-BP7-10
ZC-BP7-12
ZC-BP7-16
ZC-BP8-16
MC-BX7
hose type
SAE100R7
SAE100R8
hose I.D.
[inch]
ferrule I.D.
[mm]
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1
11,6
13,9
15,9
17,5
21,3
24,8
28,2
34,6
code
MC-BX7-03
MC-BX7-04
MC-BX7-05
MC-BX7-06
MC-BX7-08
MC-BX7-10
MC-BX7-12
MC-BX7-16
MC-BX8-16
hose type
SAE100R6 / R7 / R8
SAE100R6 / R7
SAE100R8
Attention!
For thermoplastic and hydraulic rubber hoses with textile braid, properly selected ferrules of L type can be used (see INDUSTRIAL FITTINGS
- clips, clamps, ferrules).
725

TI-Z STANDARD
thread
size
[inch]
1/8
1/4
3/8
1/2
5/8
3/4
1.1/4
1.1/2
2
DKR
DKR 45
code
TI-ZBZ110-02-03
TI-ZBZ110-02-04*
TI-ZBZ110-04-03*
TI-ZBZ110-04-04*
TI-ZBZ110-04-05
TI-ZBZ110-04-06
TI-ZBZ110-06-04*
TI-ZBZ110-06-05*
TI-ZBZ110-06-06*
TI-ZBZ110-06-08
TI-ZBZ110-08-04
TI-ZBZ110-08-05
TI-ZBZ110-08-06*
TI-ZBZ110-08-08*
TI-ZBZ110-08-10
TI-ZBZ110-08-12
code
TI-ZBW110-02-03*
TI-ZBW110-02-04*
TI-ZBW110-04-03*
TI-ZBW110-04-04*
TI-ZBW110-04-05*
TI-ZBW110-04-06
TI-ZBW110-06-04*
TI-ZBW110-06-05*
TI-ZBW110-06-06*
TI-ZBW110-06-08*
TI-ZBW110-08-04
TI-ZBW110-08-05
TI-ZBW110-08-06*
TI-ZBW110-08-08*
TI-ZBW110-08-10*
TI-ZBW110-08-12
TI-ZBW110-10-08*
TI-ZBW110-10-10*
TI-ZBW110-10-12
TI-ZBW110-12-08*
TI-ZBW110-12-10*
TI-ZBW110-12-12*
TI-ZBW110-12-16
TI-ZBW110-16-12*
TI-ZBW110-16-16*
code
TI-ZBW210-02-03
TI-ZBW210-02-04
TI-ZBW210-04-03*
TI-ZBW210-04-04*
TI-ZBW210-04-05
TI-ZBW210-04-06
TI-ZBW210-06-04*
TI-ZBW210-06-05*
TI-ZBW210-06-06*
TI-ZBW210-06-08
code
TI-ZBW310-02-03
TI-ZBW310-02-04
TI-ZBW310-04-03*
TI-ZBW310-04-04*
TI-ZBW310-04-05
TI-ZBW310-04-06
TI-ZBW310-06-04*
TI-ZBW310-06-05*
TI-ZBW310-06-06*
TI-ZBW310-06-08
TI-ZBW210-08-06*
TI-ZBW210-08-08*
TI-ZBW210-08-10
TI-ZBW310-08-06*
TI-ZBW310-08-08*
TI-ZBW310-08-10
TI-ZBW210-10-08
TI-ZBW210-10-10*
TI-ZBW310-10-08
TI-ZBW310-10-10*
TI-ZBW210-12-08*
TI-ZBW210-12-10*
TI-ZBW210-12-12*
TI-ZBW310-12-08
TI-ZBW310-12-10*
TI-ZBW310-12-12*
TI-ZBW210-16-12*
TI-ZBW210-16-16*
TI-ZBW310-16-12*
TI-ZBW310-16-16*
TI-ZBW110-20-16*
TI-ZBW110-20-20*
TI-ZBW210-20-16
TI-ZBW210-20-20*
TI-ZBW310-20-16
TI-ZBW310-20-20*
TI-ZBW110-24-20*
TI-ZBW110-24-24*
TI-ZBW110-32-24*
TI-ZBW110-32-32*
TI-ZBW210-24-20
TI-ZBW210-24-24*
TI-ZBW210-32-24
TI-ZBW210-32-32*
TI-ZBW310-24-20
TI-ZBW310-24-24*
TI-ZBW310-32-24
TI-ZBW310-32-32*
hose I.D.
[inch]
3/16
1/4
3/16
1/4
5/16
3/8
1/4
5/16
3/8
1/2
1/4
5/16
3/8
1/2
5/8
3/4
1/2
5/8
3/4
1/2
5/8
3/4
1
3/4
1
1.1/4
1
1.1/4
1.1/2
1.1/4
1.1/2
1.1/2
2
TI-Z STANDARD
thread
size
[inch]
hose I.D.
[inch]
1/4
3/8
1/2
3/4
1/4
3/8
1/2
3/4
* - available in AISI 316 steel
726
BSP thread, 60 cone

DKR 90
AGR
TI-ZBZ110-10-10*
TI-ZBZ110-12-08
TI-ZBZ110-12-10*
TI-ZBZ110-12-12*
TI-ZBZ110-12-16
TI-ZBZ110-16-12*
TI-ZBZ110-16-16*
TI-ZBZ110-16-20
TI-ZBZ110-20-16*
TI-ZBZ110-20-20*
TI-ZBZ110-20-24
TI-ZBZ110-24-20*
TI-ZBZ110-24-24*
TI-ZBZ110-32-32*
BSP thread, 60 cone - COMPACT

DKR 90
code
TI-ZBW410-04-04
TI-ZBW410-06-06
TI-ZBW410-08-08
TI-ZBW410-12-12

TI-Z STANDARD
thread
size
[inch]
hose I.D.
[inch]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
TI-Z STANDARD
thread
size
[inch]
1/8
1/4
3/8
1/2
5/8
3/4
1
DKOR
BSP thread, 60 cone, O-ring

DKOR 90
DKOR 45
code
TI-ZBW120-04-04
TI-ZBW120-06-06
TI-ZBW120-08-08
TI-ZBW120-12-12
TI-ZBW120-16-16
TI-ZBW120-20-20
TI-ZBW120-24-24
TI-ZBW120-32-32
code
TI-ZBW220-04-04
TI-ZBW220-06-06
TI-ZBW220-08-08
TI-ZBW220-12-12
TI-ZBW220-16-16
TI-ZBW220-20-20
TI-ZBW220-24-24
TI-ZBW220-32-32
code
TI-ZBW320-04-04
TI-ZBW320-06-06
TI-ZBW320-08-08
TI-ZBW320-12-12
TI-ZBW320-16-16
TI-ZBW320-20-20
TI-ZBW320-24-24
TI-ZBW320-32-32
BANJO imperial
copper washer
RNR
bolt
double bolt
code
code
TI-ZBB600-02-03
TI-ZBB600-02-04
TI-ZBB600-04-03
TI-ZBB600-04-04*
TI-ZBB600-04-05
TI-ZBB600-04-06
TI-ZBB600-06-04
TI-ZBB600-06-05*
TI-ZBB600-06-06*
TI-ZBB600-06-08*
TI-ZBB600-08-06*
TI-ZBB600-08-08*
TI-ZBB600-10-08
TI-ZBB600-10-10
TI-ZBB600-12-08*
TI-ZBB600-12-10
TI-ZBB600-12-12*
TI-ZBB600-16-12
TI-ZBB600-16-16*
code
code
TI-ZBB610-02
TI-ZBB620-02
TI-ZBB610-04*
TI-ZBB620-04
TI-ZBB610-06*
TI-ZBB620-06
TI-ZBB610-08*
TI-ZBB620-08
TI-ZBB610-10
TI-ZBB620-10
TI-ZBB610-12*
TI-ZBB620-12
TI-ZBB610-16*
TI-ZBB620-16
hose I.D.
[inch]
3/16
1/4
3/16
1/4
5/16
3/8
1/4
5/16
3/8
1/2
3/8
1/2
1/2
5/8
1/2
5/8
3/4
3/4
1
TI-Z STANDARD
thread
size
[inch]
hose I.D.
[inch]
1/4
3/8
1/2
3/4
1
1/4
3/8
1/2
3/4
1
TI-UM-10/16
TI-UM-13/19
TI-UM-17/21
TI-UM-21/26
TI-UM-24/30
TI-UM-27/33
TI-UM-33/40
BSP thread, reversed cone 60 - TOYOTA
code
TI-ZBW150-04-04
TI-ZBW150-06-06
TI-ZBW150-08-08
TI-ZBW150-12-12
TI-ZBW150-16-16
727

TI-Z STANDARD
thread
size
[inch]
1/8
1/4
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
1/4
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
code
TI-ZBZ130-02-03
TI-ZBZ130-02-04
TI-ZBZ130-04-03*
TI-ZBZ130-04-04*
TI-ZBZ130-04-05*
TI-ZBZ130-04-06*
TI-ZBZ130-06-04*
TI-ZBZ130-06-05*
TI-ZBZ130-06-06*
TI-ZBZ130-06-08
TI-ZBZ130-08-06*
TI-ZBZ130-08-08*
TI-ZBZ130-08-10
TI-ZBZ130-10-10
TI-ZBZ130-12-08*
TI-ZBZ130-12-10*
TI-ZBZ130-12-12*
TI-ZBZ130-16-12*
TI-ZBZ130-16-16*
TI-ZBZ130-20-16*
TI-ZBZ130-20-20*
TI-ZBZ130-20-24
TI-ZBZ130-24-20*
TI-ZBZ130-24-24*
TI-ZBZ130-32-32*
code
TI-ZNZ110-02-03*
TI-ZNZ110-02-04*
TI-ZNZ110-04-03*
TI-ZNZ110-04-04*
TI-ZNZ110-04-05*
TI-ZNZ110-04-06
TI-ZNZ110-06-04*
TI-ZNZ110-06-05*
TI-ZNZ110-06-06*
TI-ZNZ110-06-08
TI-ZNZ110-08-06*
TI-ZNZ110-08-08*
TI-ZNZ110-08-10
TI-ZNZ110-10-10*
TI-ZNZ110-12-08*
TI-ZNZ110-12-10*
TI-ZNZ110-12-12*
TI-ZNZ110-16-12*
TI-ZNZ110-16-16*
TI-ZNZ110-20-16*
TI-ZNZ110-20-20*
3/16
1/4
3/16
1/4
5/16
3/8
1/4
5/16
3/8
1/2
3/8
1/2
5/8
5/8
1/2
5/8
3/4
3/4
1
1
1.1/4
1.1/2
1.1/4
1.1/2
2
AGR-F
TI-ZNZ110-24-20*
TI-ZNZ110-24-24*
TI-ZNZ110-32-32*
BSP thread, flat sealing
DKR-F
DKR-F 90
DKR-F 45
hose I.D.
[inch]
1/4
1/4
5/16
3/8
5/16
3/8
1/2
1/2
5/8
1/2
5/8
3/4
3/4
1
1.1/4
1.1/2
2
728
NPT thread, 60 cone

AGN
hose I.D.
[inch]
TI-Z STANDARD
thread
size
[inch]
BSPT thread, 60 cone

AGR-K
code
TI-ZBZ140-04-04*
TI-ZBZ140-06-04
TI-ZBZ140-06-05*
TI-ZBZ140-06-06*
TI-ZBZ140-08-05
TI-ZBZ140-08-06*
TI-ZBZ140-08-08*
TI-ZBZ140-10-10*
TI-ZBZ140-12-08
TI-ZBZ140-12-10
TI-ZBZ140-12-12*
TI-ZBZ140-16-12*
TI-ZBZ140-16-16*
code
TI-ZBW140-04-04*
TI-ZBW140-06-04*
TI-ZBW140-06-05*
TI-ZBW140-06-06*
TI-ZBW140-08-06*
TI-ZBW140-08-08*
TI-ZBW140-10-08
TI-ZBW140-10-10
TI-ZBW140-12-08*
TI-ZBW140-12-10*
TI-ZBW140-12-12*
TI-ZBW140-16-12
TI-ZBW140-16-16*
TI-ZBW140-20-20*
TI-ZBW140-24-24*
TI-ZBW140-32-32*
code
TI-ZBW240-04-04
code
TI-ZBW340-04-04
TI-ZBW240-06-06
TI-ZBW340-06-06
TI-ZBW240-08-08
TI-ZBW340-08-08
TI-ZBW240-10-10
TI-ZBW340-10-10
TI-ZBW240-12-12
TI-ZBW340-12-12
TI-ZBW240-16-16
TI-ZBW240-20-20
TI-ZBW340-16-16
TI-ZBW340-20-20

TI-Z STANDARD
thread
size
[mm]
M12x1,5
M14x1,5
M16x1,5
M18x1,5
M22x1,5
M26x1,5
M27x2
M30x2
M36x2
M45x2
M52x2
3/16
1/4
3/16
1/4
1/4
5/16
3/8
1/4
5/16
3/8
3/8
1/2
1/2
5/8
5/8
5/8
3/4
1
1.1/4
1.1/2
code
TI-ZMZ111-12-03*
TI-ZMZ111-12-04*
TI-ZMZ111-14-04*
TI-ZMZ111-16-04*
TI-ZMZ111-16-05*
TI-ZMZ111-16-06*
TI-ZMZ111-18-04*
TI-ZMZ111-18-05*
TI-ZMZ111-18-06*
TI-ZMZ111-22-06*
TI-ZMZ111-22-08*
TI-ZMZ111-26-08*
TI-ZMZ111-26-10*
TI-ZMZ111-27-10*
TI-ZMZ111-30-10
TI-ZMZ111-30-12*
TI-ZMZ111-36-16*
TI-ZMZ111-45-20*
TI-ZMZ111-52-24*
CES
M16x1,5
M18x1,5
M20x1,5
M22x1,5
M24x1,5
M30x2
M36x2
M42x2
M52x2
DKOL 45
code
TI-ZMW121-12-03*
TI-ZMW121-12-04*
TI-ZMW121-14-03
TI-ZMW121-14-04*
TI-ZMW121-16-04*
TI-ZMW121-16-05*
TI-ZMW121-16-06*
TI-ZMW121-18-04*
TI-ZMW121-18-05*
TI-ZMW121-18-06*
TI-ZMW121-22-06*
TI-ZMW121-22-08*
TI-ZMW121-26-08*
TI-ZMW121-26-10*
TI-ZMW121-27-10*
TI-ZMW121-30-10
TI-ZMW121-30-12*
TI-ZMW121-36-16*
TI-ZMW121-45-20*
TI-ZMW121-52-24*
code
TI-ZMW221-12-03
TI-ZMW221-12-04*
TI-ZMW221-14-03
TI-ZMW221-14-04*
TI-ZMW221-16-04*
TI-ZMW221-16-05*
TI-ZMW221-16-06*
TI-ZMW221-18-04
TI-ZMW221-18-05*
TI-ZMW221-18-06*
TI-ZMW221-22-06*
TI-ZMW221-22-08*
TI-ZMW221-26-08
TI-ZMW221-26-10*
TI-ZMW221-27-10*
TI-ZMW221-30-10
TI-ZMW221-30-12*
TI-ZMW221-36-16*
TI-ZMW221-45-20*
TI-ZMW221-52-24*
Metric thread, 24 cone, O-ring, heavy duty

DKOS
DKOS 90
code
TI-ZMW321-12-03
TI-ZMW321-12-04*
TI-ZMW321-14-03
TI-ZMW321-14-04*
TI-ZMW321-16-04*
TI-ZMW321-16-05*
TI-ZMW321-16-06*
TI-ZMW321-18-04
TI-ZMW321-18-05
TI-ZMW321-18-06*
TI-ZMW321-22-06
TI-ZMW321-22-08*
TI-ZMW321-26-08
TI-ZMW321-26-10*
TI-ZMW321-27-10*
TI-ZMW321-30-10
TI-ZMW321-30-12*
TI-ZMW321-36-16*
TI-ZMW321-45-20*
TI-ZMW321-52-24*
DKOS 45
hose I.D.
[inch]
code
M14x1,5
Metric thread, 24 cone, O-ring, light duty

DKOL
DKOL 90
hose I.D.
[inch]
TI-Z STANDARD
thread
size
[mm]
CEL
3/16
1/4
3/16
1/4
1/4
5/16
3/8
1/4
5/16
3/8
3/8
1/2
1/2
5/8
3/4
3/4
1
1
1.1/4
1.1/4
1.1/2
TI-ZMZ112-14-04
TI-ZMZ112-16-04*
TI-ZMZ112-18-04*
TI-ZMZ112-18-05*
TI-ZMZ112-18-06*
TI-ZMZ112-20-04
TI-ZMZ112-20-05*
TI-ZMZ112-20-06*
TI-ZMZ112-22-06*
TI-ZMZ112-22-08*
TI-ZMZ112-24-08*
TI-ZMZ112-30-10*
TI-ZMZ112-30-12*
TI-ZMZ112-36-12*
TI-ZMZ112-36-16*
TI-ZMZ112-42-16*
TI-ZMZ112-42-20
TI-ZMZ112-52-20*
TI-ZMZ112-52-24*
code
TI-ZMW122-14-03
TI-ZMW122-14-04
TI-ZMW122-16-03
TI-ZMW122-16-04*
TI-ZMW122-18-04*
TI-ZMW122-18-05
TI-ZMW122-18-06
TI-ZMW122-20-04
TI-ZMW122-20-05*
TI-ZMW122-20-06*
TI-ZMW122-22-06*
TI-ZMW122-22-08
TI-ZMW122-24-08*
TI-ZMW122-30-10*
TI-ZMW122-30-12*
TI-ZMW122-36-12*
TI-ZMW122-36-16*
TI-ZMW122-42-16*
TI-ZMW122-42-20
TI-ZMW122-52-20*
TI-ZMW122-52-24
code
TI-ZMW222-14-03
TI-ZMW222-14-04*
TI-ZMW222-16-03
TI-ZMW222-16-04*
TI-ZMW222-18-04*
TI-ZMW222-18-05
TI-ZMW222-18-06
TI-ZMW222-20-04
TI-ZMW222-20-05*
TI-ZMW222-20-06*
TI-ZMW222-22-06*
TI-ZMW222-22-08
TI-ZMW222-24-08*
TI-ZMW222-30-10*
TI-ZMW222-30-12*
TI-ZMW222-36-12*
TI-ZMW222-36-16*
TI-ZMW222-42-16*
TI-ZMW222-42-20
TI-ZMW222-52-20*
TI-ZMW222-52-24
code
TI-ZMW322-14-03
TI-ZMW322-14-04*
TI-ZMW322-16-03
TI-ZMW322-16-04*
TI-ZMW322-18-04*
TI-ZMW322-18-05
TI-ZMW322-18-06
TI-ZMW322-20-04
TI-ZMW322-20-05*
TI-ZMW322-20-06*
TI-ZMW322-22-06*
TI-ZMW322-22-08
TI-ZMW322-24-08*
TI-ZMW322-30-10*
TI-ZMW322-30-12*
TI-ZMW322-36-12*
TI-ZMW322-36-16*
TI-ZMW322-42-16*
TI-ZMW322-42-20
TI-ZMW322-52-20*
TI-ZMW322-52-24
729

TI-Z STANDARD
thread
size
[mm]
M12x1,5
M14x1,5
M16x1,5
M18x1,5
M22x1,5
M26x1,5
M27x1,5
M27x2
M30x2
M33x1,5
M33x2
M36x2
M45x2
M52x2
Metric thread, 24/60 cone, light duty

DKL 90
code
TI-ZMW111-12-04*
TI-ZMW111-14-04*
TI-ZMW111-16-04
TI-ZMW111-16-05*
TI-ZMW111-16-06
TI-ZMW111-18-05
TI-ZMW111-18-06*
TI-ZMW111-22-06
TI-ZMW111-22-08*
TI-ZMW111-22/16L-08
TI-ZMW111-26-10*
TI-ZMW111-27/1,5-10
TI-ZMW111-27-10
TI-ZMW111-30-12*
TI-ZMW111-33/1,5-12
TI-ZMW111-33-12
TI-ZMW111-36-16*
TI-ZMW111-45-20*
TI-ZMW111-52-24*
code
TI-ZMW211-12-04*
TI-ZMW211-14-04*
TI-ZMW211-16-04
TI-ZMW211-16-05*
TI-ZMW211-16-06
TI-ZMW211-18-05
TI-ZMW211-18-06*
TI-ZMW211-22-06
TI-ZMW211-22-08*
TI-ZMW211-22/16L-08
TI-ZMW211-26-10*
TI-ZMW211-27/1,5-10
TI-ZMW211-27-10
TI-ZMW211-30-12*
TI-ZMW211-33/1,5-12
TI-ZMW211-33-12
TI-ZMW211-36-16*
TI-ZMW211-45-20*
TI-ZMW211-52-24*
DKS
Metric thread, 24/60 cone, heavy duty

DKS 90
DKS 45
code
TI-ZMW112-18-04*
TI-ZMW112-20-05*
TI-ZMW112-22-06*
TI-ZMW112-24-08*
TI-ZMW112-30-10*
TI-ZMW112-36-12*
TI-ZMW112-42-16*
TI-ZMW112-52-20*
code
TI-ZMW212-18-04*
TI-ZMW212-20-05*
TI-ZMW212-22-06*
TI-ZMW212-24-08*
TI-ZMW212-30-10*
TI-ZMW212-36-12*
TI-ZMW212-42-16*
TI-ZMW212-52-20*
code
TI-ZMW312-18-04*
TI-ZMW312-20-05*
TI-ZMW312-22-06*
TI-ZMW312-24-08*
TI-ZMW312-30-10*
TI-ZMW312-36-12*
TI-ZMW312-42-16*
TI-ZMW312-52-20*
DKL 45
hose I.D.
[inch]
1/4
1/4
1/4
5/16
3/8
5/16
3/8
3/8
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
1
1.1/4
1.1/2
TI-Z STANDARD
thread
size
[mm]
hose I.D.
[inch]
M18x1,5
M20x1,5
M22x1,5
M24x1,5
M30x2
M36x2
M42x2
M52x2
1/4
5/16
3/8
1/2
5/8
3/4
1
1.1/4
730
DKL
code
TI-ZMW311-12-04*
TI-ZMW311-14-04*
TI-ZMW311-16-04
TI-ZMW311-16-05*
TI-ZMW311-16-06
TI-ZMW311-18-05
TI-ZMW311-18-06*
TI-ZMW311-22-06
TI-ZMW311-22-08*
TI-ZMW311-22/16L-08
TI-ZMW311-26-10*
TI-ZMW311-27-10
TI-ZMW311-30-12*
TI-ZMW311-36-16*
TI-ZMW311-45-20*
TI-ZMW311-52-24*

TI-Z STANDARD
pipe O.D.
[mm]
hose I.D.
[inch]
6
6
8
8
8
10
10
12
12
15
15
18
18
18
22
22
28
35
42
3/16
1/4
1/4
5/16
3/8
5/16
3/8
3/8
1/2
3/8
1/2
1/2
5/8
3/4
5/8
3/4
1
1.1/4
1.1/2
TI-Z STANDARD
pipe O.D.
[mm]
hose I.D.
[inch]
8
10
12
12
14
14
16
20
20
25
25
30
38
38
1/4
1/4
1/4
5/16
3/8
1/2
1/2
5/8
3/4
3/4
1
1
1.1/4
1.1/2
BEL
Metric standpipe, light duty

BEL 90
BEL 45
code
TI-ZMR111-06-03*
TI-ZMR111-06-04*
TI-ZMR111-08-04*
TI-ZMR111-08-05*
TI-ZMR111-08-06*
TI-ZMR111-10-05*
TI-ZMR111-10-06*
TI-ZMR111-12-06*
TI-ZMR111-12-08*
TI-ZMR111-15-06*
TI-ZMR111-15-08*
TI-ZMR111-18-08*
TI-ZMR111-18-10*
TI-ZMR111-18-12*
TI-ZMR111-22-10*
TI-ZMR111-22-12*
TI-ZMR111-28-16*
TI-ZMR111-35-20*
TI-ZMR111-42-24*
code
TI-ZMR211-06-03*
TI-ZMR211-06-04*
TI-ZMR211-08-04*
TI-ZMR211-08-05*
TI-ZMR211-10-05*
TI-ZMR211-10-06*
TI-ZMR211-12-06*
TI-ZMR211-12-08*
TI-ZMR211-15-06*
TI-ZMR211-15-08*
TI-ZMR211-18-08*
TI-ZMR211-18-10*
TI-ZMR211-22-10*
TI-ZMR211-22-12*
TI-ZMR211-28-16*
TI-ZMR211-35-20*
TI-ZMR211-42-24*
code
TI-ZMR311-06-03*
TI-ZMR311-06-04*
TI-ZMR311-08-04*
TI-ZMR311-08-05*
TI-ZMR311-10-05*
TI-ZMR311-10-06*
TI-ZMR311-12-06*
TI-ZMR311-12-08*
TI-ZMR311-15-06*
TI-ZMR311-15-08*
TI-ZMR311-18-08*
TI-ZMR311-18-10*
TI-ZMR311-22-10*
TI-ZMR311-22-12*
TI-ZMR311-28-16*
TI-ZMR311-35-20*
TI-ZMR311-42-24*
BES
Metric standpipe, heavy duty

BES 90
BES 45
code
TI-ZMR112-08-04*
TI-ZMR112-10-04*
TI-ZMR112-12-04*
TI-ZMR112-12-05*
TI-ZMR112-14-06*
TI-ZMR112-14-08*
TI-ZMR112-16-08*
TI-ZMR112-20-10*
TI-ZMR112-20-12*
TI-ZMR112-25-12*
TI-ZMR112-25-16*
TI-ZMR112-30-16*
TI-ZMR112-38-20*
TI-ZMR112-38-24
code
TI-ZMR212-08-04*
TI-ZMR212-10-04*
TI-ZMR212-12-04*
TI-ZMR212-12-05*
TI-ZMR212-14-06*
TI-ZMR212-14-08*
TI-ZMR212-16-08*
TI-ZMR212-20-10*
TI-ZMR212-20-12*
TI-ZMR212-25-12*
TI-ZMR212-25-16*
TI-ZMR212-30-16*
TI-ZMR212-38-20*
TI-ZMR212-38-24
code
TI-ZMR312-08-04*
TI-ZMR312-10-04*
TI-ZMR312-12-04*
TI-ZMR312-12-05*
TI-ZMR312-14-06*
TI-ZMR312-14-08*
TI-ZMR312-16-08*
TI-ZMR312-20-10*
TI-ZMR312-20-12*
TI-ZMR312-25-12*
TI-ZMR312-25-16*
TI-ZMR312-30-16*
TI-ZMR312-38-20*
TI-ZMR312-38-24
731

TI-Z STANDARD
thread
size
[mm]
M10
M12
M14
M16
M18
M20
M22
M26
M30
BANJO metric
copper washer
RNM
bolt
double bolt
code
code
TI-ZMB600-10-03
TI-ZMB600-10-04
TI-ZMB600-12-03
TI-ZMB600-12-04*
TI-ZMB600-12-05
TI-ZMB600-14-03
TI-ZMB600-14-04*
TI-ZMB600-14-05
TI-ZMB600-14-06*
TI-ZMB600-16-04
TI-ZMB600-16-05*
TI-ZMB600-16-06*
TI-ZMB600-18-05
TI-ZMB600-18-06*
TI-ZMB600-18-08*
TI-ZMB600-20-06
TI-ZMB600-20-08*
TI-ZMB600-22-08*
TI-ZMB600-22-10
TI-ZMB600-26-10
TI-ZMB600-26-12*
TI-ZMB600-30-12*
TI-ZMB600-30-16
code
code
TI-ZMB610-10/1
TI-ZMB620-10/1
TI-ZMB610-12/1,5*
TI-ZMB620-12/1,5*
TI-ZMB610-14/1,5*
TI-ZMB620-14/1,5*
TI-ZMB610-16/1,5*
TI-ZMB620-16/1,5*
TI-ZMB610-18/1,5*
TI-ZMB620-18/1,5*
hose I.D.
[inch]
3/16
1/4
3/16
1/4
5/16
3/16
1/4
5/16
3/8
1/4
5/16
3/8
5/16
3/8
1/2
3/8
1/2
1/2
5/8
5/8
3/4
3/4
1
TI-UM-10/16
TI-UM-12/18
TI-UM-14/20
TI-UM-16/22
TI-UM-16/23
TI-UM-20/26
TI-UM-22/27
TI-UM-26/33
TI-UM-30/36
TI-ZMB610-20/1,5
TI-ZMB610-22/1,5*
TI-ZMB620-22/1,5*
TI-ZMB610-26/1,5*
TI-ZMB620-26/1,5*
TI-ZMB610-30/1,5*

TI-Z STANDARD
thread
size
[inch]
M10x1
M12x1,5
M14x1,5
M16x1,5
M18x1,5
M20x1,5
M22x1,5
M24x1,5
M26x1,5
M30x1,5
M33x1,5
M36x1,5
M38x1,5
M42x1,5
M45x1,5
732
Metric thread, reversed cone 60

KOMATSU
Metric thread, 60 cone

DKM
code
TI-ZMW150-14-04
TI-ZMW150-16-06
TI-ZMW150-18-06
TI-ZMW150-22-08
code
TI-ZMW160-10/1-04
TI-ZMW160-12-04
TI-ZMW160-14-04
TI-ZMW160-16-04
TI-ZMW160-18-04
TI-ZMW160-18-05
TI-ZMW160-20-06
TI-ZMW160-22-06
TI-ZMW160-24-08
TI-ZMW160-26-10
TI-ZMW160-30-12
TI-ZMW160-38-16
TI-ZMW160-45-20
hose I.D.
[inch]
1/4
1/4
1/4
1/4
3/8
1/4
5/16
3/8
3/8
3/8
1/2
1/2
5/8
5/8
3/4
1
1.1/4
1
1.1/2
1.1/4
TI-ZMW150-24-10
TI-ZMW150-30-12
TI-ZMW150-33-16
TI-ZMW150-36-20
TI-ZMW150-42-24
-

TI-Z STANDARD
thread
size
[inch]
7/16-20
1/2-20
9/16-18
5/8-18
3/4-16
7/8-14
1.1/16-16
1.3/16-12
1.5/16-12
1.5/8-12
1.7/8-12
2.1/2-12
AGJ
JIC thread UNF, 74 cone

DKJ
DKJ 90
DKJ 45
hose I.D.
[inch]
3/16
1/4
3/16
1/4
5/16
1/4
5/16
3/8
5/16
3/8
5/16
3/8
1/2
3/8
1/2
5/8
3/4
1/2
5/8
3/4
1
3/4
1
5/8
3/4
1
1
1.1/4
1.1/4
1.1/2
2
code
TI-ZJZ110-07-03*
TI-ZJZ110-07-04*
TI-ZJZ110-08-03*
TI-ZJZ110-08-04*
TI-ZJZ110-08-05*
TI-ZJZ110-09-04*
TI-ZJZ110-09-05*
TI-ZJZ110-09-06*
TI-ZJZ110-10-05
TI-ZJZ110-10-06
TI-ZJZ110-12-05
TI-ZJZ110-12-06*
TI-ZJZ110-12-08*
TI-ZJZ110-14-06*
TI-ZJZ110-14-08*
TI-ZJZ110-14-10*
TI-ZJZ110-14-12
TI-ZJZ110-17-08*
TI-ZJZ110-17-10*
TI-ZJZ110-17-12*
TI-ZJZ110-17-16*
TI-ZJZ110-19-12
TI-ZJZ110-19-16
TI-ZJZ110-21-10
TI-ZJZ110-21-12*
TI-ZJZ110-21-16*
TI-ZJZ110-26-16*
TI-ZJZ110-26-20*
TI-ZJZ110-30-20
TI-ZJZ110-30-24*
TI-ZJZ110-40-32*
code
TI-ZJW110-07-03*
TI-ZJW110-07-04*
TI-ZJW110-08-03*
TI-ZJW110-08-04*
TI-ZJW110-08-05*
TI-ZJW110-09-04*
TI-ZJW110-09-05*
TI-ZJW110-09-06*
TI-ZJW110-10-05
TI-ZJW110-10-06
TI-ZJW110-12-05
TI-ZJW110-12-06*
TI-ZJW110-12-08*
TI-ZJW110-14-06*
TI-ZJW110-14-08*
TI-ZJW110-14-10*
TI-ZJW110-14-12
TI-ZJW110-17-08*
TI-ZJW110-17-10*
TI-ZJW110-17-12*
TI-ZJW110-17-16*
TI-ZJW110-19-12
TI-ZJW110-19-16
TI-ZJW110-21-10
TI-ZJW110-21-12*
TI-ZJW110-21-16*
TI-ZJW110-26-16*
TI-ZJW110-26-20*
TI-ZJW110-30-20
TI-ZJW110-30-24*
TI-ZJW110-40-32*
code
TI-ZJW210-07-03*
TI-ZJW210-07-04*
TI-ZJW210-08-03
TI-ZJW210-08-04*
TI-ZJW210-08-05*
TI-ZJW210-09-04*
TI-ZJW210-09-05*
TI-ZJW210-09-06*
TI-ZJW210-12-05
TI-ZJW210-12-06*
TI-ZJW210-12-08*
TI-ZJW210-14-06*
TI-ZJW210-14-08*
TI-ZJW210-14-10*
TI-ZJW210-17-08
TI-ZJW210-17-10*
TI-ZJW210-17-12*
TI-ZJW210-19-12
TI-ZJW210-21-12
TI-ZJW210-21-16*
TI-ZJW210-26-16
TI-ZJW210-26-20*
TI-ZJW210-30-20
TI-ZJW210-30-24*
TI-ZJW210-40-32*
code
TI-ZJW310-07-03*
TI-ZJW310-07-04*
TI-ZJW310-08-04*
TI-ZJW310-08-05*
TI-ZJW310-09-04*
TI-ZJW310-09-05*
TI-ZJW310-09-06*
TI-ZJW310-12-05
TI-ZJW310-12-06*
TI-ZJW310-12-08*
TI-ZJW310-14-06*
TI-ZJW310-14-08*
TI-ZJW310-14-10*
TI-ZJW310-17-08
TI-ZJW310-17-10*
TI-ZJW310-17-12*
TI-ZJW310-19-12
TI-ZJW310-21-16*
TI-ZJW310-26-16
TI-ZJW310-26-20*
TI-ZJW310-30-20
TI-ZJW310-30-24*
TI-ZJW310-40-32*
733

SAE 3000 flange
TI-Z STANDARD
flange size
[inch]
5/8
3/4
1
1.1/4
1.1/2
2
2.1/2
SFL 90
SFL 45
code
TI-ZSK111-08-08*
TI-ZSK111-08-10
TI-ZSK111-10-08K**
TI-ZSK111-10-10K**
TI-ZSK111-12-08*
TI-ZSK111-12-10*
TI-ZSK111-12-12*
TI-ZSK111-16-12*
TI-ZSK111-16-16*
TI-ZSK111-20-16*
TI-ZSK111-20-20*
TI-ZSK111-24-20*
TI-ZSK111-24-24*
TI-ZSK111-32-24*
TI-ZSK111-32-32*
TI-ZSK111-40-32
code
TI-ZSK211-08-08*
TI-ZSK211-08-10
TI-ZSK211-10-08K**
TI-ZSK211-10-10K**
TI-ZSK211-12-08*
TI-ZSK211-12-10*
TI-ZSK211-12-12*
TI-ZSK211-16-12*
TI-ZSK211-16-16*
TI-ZSK211-20-16*
TI-ZSK211-20-20*
TI-ZSK211-24-20*
TI-ZSK211-24-24*
TI-ZSK211-32-24*
TI-ZSK211-32-32*
TI-ZSK211-40-32
code
TI-ZSK311-08-08*
TI-ZSK311-08-10
TI-ZSK311-10-08K**
TI-ZSK311-10-10K**
TI-ZSK311-12-08*
TI-ZSK311-12-10*
TI-ZSK311-12-12*
TI-ZSK311-16-12*
TI-ZSK311-16-16*
TI-ZSK311-20-16*
TI-ZSK311-20-20*
TI-ZSK311-24-20*
TI-ZSK311-24-24*
TI-ZSK311-32-24*
TI-ZSK311-32-32*
TI-ZSK311-40-32
hose I.D.
[inch]
code
1/2
SFL
1/2
5/8
1/2
5/8
1/2
5/8
3/4
3/4
1
1
1.1/4
1.1/4
1.1/2
1.1/2
2
2
TI-ZSK611-08*
TI-ZSK611-12*
TI-ZSK611-16*
TI-ZSK611-20*
TI-ZSK611-24*
TI-ZSK611-32*
TI-ZSK611-40
SAE 6000 flange
TI-Z STANDARD
flange size
[inch]
3/4
1
1.1/4
1.1/2
2
1/2
5/8
3/4
1/2
5/8
3/4
1
3/4
1
1
1.1/4
1.1/4
1.1/2
1.1/2
2

** - KOMATSU
734
SFS 90
SFS 45
code
TI-ZSK112-08-08*
TI-ZSK112-08-10
TI-ZSK112-08-12
TI-ZSK112-12-08*
TI-ZSK112-12-10*
TI-ZSK112-12-12*
TI-ZSK112-12-16
TI-ZSK112-16-12*
TI-ZSK112-16-16*
TI-ZSK112-20-16*
TI-ZSK112-20-20*
TI-ZSK112-24-20*
TI-ZSK112-24-24*
TI-ZSK112-32-24*
TI-ZSK112-32-32*
code
TI-ZSK212-08-08*
TI-ZSK212-08-10
TI-ZSK212-08-12
TI-ZSK212-12-08*
TI-ZSK212-12-10*
TI-ZSK212-12-12*
TI-ZSK212-12-16
TI-ZSK212-16-12*
TI-ZSK212-16-16*
TI-ZSK212-20-16*
TI-ZSK212-20-20*
TI-ZSK212-24-20*
TI-ZSK212-24-24*
TI-ZSK212-32-24*
TI-ZSK212-32-32*
code
TI-ZSK312-08-08*
TI-ZSK312-08-10
TI-ZSK312-08-12
TI-ZSK312-12-08*
TI-ZSK312-12-10*
TI-ZSK312-12-12*
TI-ZSK312-12-16
TI-ZSK312-16-12*
TI-ZSK312-16-16*
TI-ZSK312-20-16*
TI-ZSK312-20-20*
TI-ZSK312-24-20*
TI-ZSK312-24-24*
TI-ZSK312-32-24*
TI-ZSK312-32-32*
hose I.D.
[inch]
code
1/2
SFS
TI-ZSK612-08*
TI-ZSK612-12*
TI-ZSK612-16*
TI-ZSK612-20*
TI-ZSK612-24*
TI-ZSK612-32*

TI-Z STANDARD
flange size
[inch]
hose I.D.
[inch]
3/4
3/4
3/4
1
1
1.1/4
1.1/4
1.1/2
1
1.1/4
1.1/2
SFS
SUPER CAT flange

SFS 90
SFS 45
code
TI-ZSK113-12-12
TI-ZSK113-16-12
TI-ZSK113-16-16
TI-ZSK113-20-16
TI-ZSK113-20-20
TI-ZSK113-24-20
TI-ZSK113-24-24
code
TI-ZSK213-12-12
TI-ZSK213-16-12
TI-ZSK213-16-16
TI-ZSK213-20-16
TI-ZSK213-20-20
TI-ZSK213-24-20
TI-ZSK213-24-24
code
TI-ZSK313-12-12
TI-ZSK313-16-12
TI-ZSK313-16-16
TI-ZSK313-20-16
TI-ZSK313-20-20
TI-ZSK313-24-20
TI-ZSK313-24-24
SAE flange seal
TI-USK
O-ring (NBR)
flat (polyurethane)
flange size
[inch]
code
TI-USK110-08
TI-USK110-12
TI-USK110-16
TI-USK110-20
TI-USK110-24
TI-USK110-32
1/2
3/4
1
1.1/4
1.1/2
2
TI-Z STANDARD
thread
size
[inch]
9/16-18
11/16-16
13/16-16
1-14
1.3/16-12
1.7/16-12
1.11/16-12
2-12
AORFS
d x s [mm]
18,64 x 3,53
24,99 x 3,53
32,92 x 3,53
37,69 x 3,53
47,22 x 3,53
56,75 x 3,53
code
TI-USK110-08PU
TI-USK110-12PU
TI-USK110-16PU
TI-USK110-20PU
TI-USK110-24PU
TI-USK110-32PU
UNF thread, flat sealing

ORFS
ORFS 90
D x d x s [mm]
25,40 x 17,02 x 2,79
31,72 x 23,36 x 2,79
39,62 x 31,24 x 2,79
44,45 x 36,07 x 2,79
53,98 x 45,34 x 2,79
63,50 x 54,86 x 2,79
ORFS 45
hose I.D.
[inch]
1/4
5/16
3/8
1/4
5/16
3/8
3/8
1/2
1/2
5/8
1/2
5/8
3/4
3/4
1
1.1/4
1.1/2
code
TI-ZOZ110-09-04*
TI-ZOZ110-11-04*
TI-ZOZ110-11-05*
TI-ZOZ110-11-06*
TI-ZOZ110-13-06*
TI-ZOZ110-13-08*
TI-ZOZ110-16-08*
TI-ZOZ110-16-10*
TI-ZOZ110-19-10
TI-ZOZ110-19-12*
TI-ZOZ110-23-16*
TI-ZOZ110-27-20*
TI-ZOZ110-32-24*
code
TI-ZOW110-09-04*
TI-ZOW110-09-05
TI-ZOW110-09-06
TI-ZOW110-11-04*
TI-ZOW110-11-05*
TI-ZOW110-11-06*
TI-ZOW110-13-06*
TI-ZOW110-13-08*
TI-ZOW110-16-08*
TI-ZOW110-16-10*
TI-ZOW110-19-08*
TI-ZOW110-19-10
TI-ZOW110-19-12*
TI-ZOW110-23-12*
TI-ZOW110-23-16*
TI-ZOW110-27-20*
TI-ZOW110-32-24*
code
TI-ZOW210-09-04*
TI-ZOW210-09-05
TI-ZOW210-09-06
TI-ZOW210-11-04*
TI-ZOW210-11-05*
TI-ZOW210-11-06*
TI-ZOW210-13-06*
TI-ZOW210-13-08*
TI-ZOW210-16-08*
TI-ZOW210-16-10*
TI-ZOW210-19-10
TI-ZOW210-19-12*
TI-ZOW210-23-12*
TI-ZOW210-23-16*
TI-ZOW210-27-20*
TI-ZOW210-32-24*
code
TI-ZOW310-09-04*
TI-ZOW310-09-05
TI-ZOW310-09-06
TI-ZOW310-11-04*
TI-ZOW310-11-05*
TI-ZOW310-11-06*
TI-ZOW310-13-06*
TI-ZOW310-13-08*
TI-ZOW310-16-08*
TI-ZOW310-16-10*
TI-ZOW310-19-10
TI-ZOW310-19-12*
TI-ZOW310-23-12*
TI-ZOW310-23-16*
TI-ZOW310-27-20*
TI-ZOW310-32-24*
735

TI-Z STANDARD
Connector
hose I.D.
[inch]
code
TI-ZLL-03-03
TI-ZLL-04-04*
TI-ZLL-05-05*
TI-ZLL-06-06*
TI-ZLL-08-08*
TI-ZLL-10-10*
TI-ZLL-12-12*
TI-ZLL-16*16*
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
TI-G MINING
connection
size
[inch]
hose I.D.
[inch]
1/4
3/8
1/2
3/4
1
1.1/4
1/4
3/8
1/2
3/4
1
1.1/4
STECKO
For 2SN hose
For 4SP hose
code
TI-GST120-04-04/2SN
TI-GST120-06-06/2SN
TI-GST120-08-08/2SN
TI-GST120-12-12/2SN
TI-GST120-16-16/2SN
TI-GST120-20-20/2SN
code
TI-GST120-04-04/4SP
TI-GST120-06-06/4SP
TI-GST120-08-08/4SP
TI-GST120-12-12/4SP
TI-GST120-16-16/4SP
TI-GST120-20-20/4SP
TI-G MINING
connection
size
[inch]
hose I.D.
[inch]
1/4
3/8
1/2
3/4
1
1.1/4
1/4
3/8
1/2
3/4
1
1.1/4
STECKO - dimensions
D [mm]
15
20
24
29
39
46
STECKO fittings are delivered as a set with a crimp ferrule.
736
d [mm]
10
14
18
24
31
38

NON SKIVE fittings - N type
TI-N NON SKIVE
Crimp ferrule
hose I.D.
[inch]
code
TI-N4-12
TI-N4-16
TI-N4-20
TI-N4-24
TI-N4-32
3/4
1
1.1/4
1.1/2
2
TI-N NON SKIVE
thread
size
[inch]
3/4
1
1.1/4
1.1/2
2
3/4
1
1.1/4
1.1/2
2
3/4
1
1
1.1/4
1.1/4
1.1/2
2
M30x2
M36x2
M42x2
M52x2
DKOR 45
code
TI-NBZ110-12-12
TI-NBZ110-16-16
TI-NBZ110-20-16
TI-NBZ110-20-20
TI-NBZ110-24-20
TI-NBZ110-24-24
TI-NBZ110-32-32
code
TI-NBW110-12-12
TI-NBW110-16-16
TI-NBW110-20-16
TI-NBW110-20-20
TI-NBW110-24-20
TI-NBW110-24-24
TI-NBW110-32-32
code
TI-NBW210-12-12
TI-NBW210-16-16
TI-NBW210-20-16
TI-NBW210-20-20
TI-NBW210-24-20
TI-NBW210-24-24
TI-NBW210-32-32
code
TI-NBW310-12-12
TI-NBW310-16-16
TI-NBW310-20-16
TI-NBW310-20-20
TI-NBW310-24-20
TI-NBW310-24-24
TI-NBW310-32-32

AGR-K
NPTF thread, 60 cone

AGN
code
TI-NBZ130-12-12
TI-NBZ130-16-16
code
TI-NNZ110-12-12
TI-NNZ110-16-16
TI-NNZ110-20-16
TI-NNZ110-20-20
TI-NNZ110-24-20
TI-NNZ110-24-24
TI-NNZ110-32-32
hose I.D.
[inch]
3/4
1
1
1.1/4
1.1/4
1.1/2
2
TI-N NON SKIVE
thread
size
[mm]

DKOR
DKOR 90
AGR
hose I.D.
[inch]
TI-N NON SKIVE
thread
size
[inch]
type of hose
4SP / 4SH / R13 / R15
4SP / 4SH / R13 / R15
4SH
4SH
4SH
TI-NBZ130-20-20
TI-NBZ130-24-24
TI-NBZ130-32-32
CES
Metric thread, 24 cone, O-ring, heavy duty

DKOS
DKOS 90
DKOS 45
hose I.D.
[inch]
3/4
3/4
1
1
1.1/4
1.1/4
1.1/2
code
TI-NMZ112-30-12
TI-NMZ112-36-12
TI-NMZ112-36-16
TI-NMZ112-42-16
TI-NMZ112-42-20
TI-NMZ112-52-20
TI-NMZ112-52-24
code
TI-NMW122-30-12
TI-NMW122-36-12
TI-NMW122-36-16
TI-NMW122-42-16
TI-NMW122-42-20
TI-NMW122-52-20
TI-NMW122-52-24
code
TI-NMW222-30-12
TI-NMW222-36-12
TI-NMW222-36-16
TI-NMW222-42-16
TI-NMW222-42-20
TI-NMW222-52-20
TI-NMW222-52-24
code
TI-NMW322-30-12
TI-NMW322-36-12
TI-NMW322-36-16
TI-NMW322-42-16
TI-NMW322-42-20
TI-NMW322-52-20
TI-NMW322-52-24
737

SAE 3000 flange
TI-N NON SKIVE
flange size
[inch]
1
1.1/4
1.1/2
2
2.1/2
3/4
1
3/4
1
1
1.1/4
1.1/4
1.1/2
1.1/2
2
2
TI-ZSK611-12
TI-ZSK611-16
TI-ZSK611-20
TI-ZSK611-24
TI-ZSK611-32
1
1.1/4
1.1/2
2
3/4
1
3/4
1
1
1.1/4
1.1/4
1.1/2
1.1/2
2
TI-N NON SKIVE
flange size
[inch]
hose I.D.
[inch]
3/4
3/4
3/4
1
1
1.1/4
1.1/4
1.1/2
2
1
1.1/4
1.1/2
2
738
code
TI-NSK111-12-12
TI-NSK111-12-16
TI-NSK111-16-12
TI-NSK111-16-16
TI-NSK111-20-16
TI-NSK111-20-20
TI-NSK111-24-20
TI-NSK111-24-24
TI-NSK111-32-24
TI-NSK111-32-32
TI-NSK111-40-32
code
TI-NSK211-12-12
TI-NSK211-12-16
TI-NSK211-16-12
TI-NSK211-16-16
TI-NSK211-20-16
TI-NSK211-20-20
TI-NSK211-24-20
TI-NSK211-24-24
TI-NSK211-32-24
TI-NSK211-32-32
TI-NSK211-40-32
code
TI-NSK311-12-12
TI-NSK311-12-16
TI-NSK311-16-12
TI-NSK311-16-16
TI-NSK311-20-16
TI-NSK311-20-20
TI-NSK311-24-20
TI-NSK311-24-24
TI-NSK311-32-24
TI-NSK311-32-32
TI-NSK311-40-32
SFS
SFS 90
SFS 45
code
TI-NSK112-12-12
TI-NSK112-12-16
TI-NSK112-16-12
TI-NSK112-16-16
TI-NSK112-20-16
TI-NSK112-20-20
TI-NSK112-24-20
TI-NSK112-24-24
TI-NSK112-32-24
TI-NSK112-32-32
code
TI-NSK212-12-12
TI-NSK212-12-16
TI-NSK212-16-12
TI-NSK212-16-16
TI-NSK212-20-16
TI-NSK212-20-20
TI-NSK212-24-20
TI-NSK212-24-24
TI-NSK212-32-24
TI-NSK212-32-32
code
TI-NSK312-12-12
TI-NSK312-12-16
TI-NSK312-16-12
TI-NSK312-16-16
TI-NSK312-20-16
TI-NSK312-20-20
TI-NSK312-24-20
TI-NSK312-24-24
TI-NSK312-32-24
TI-NSK312-32-32
hose I.D.
[inch]
code
3/4
SFL 45
SAE 6000 flange
TI-N NON SKIVE
flange size
[inch]
SFL 90
hose I.D.
[inch]
code
3/4
SFL
TI-ZSK612-12
TI-ZSK612-16
TI-ZSK612-20
TI-ZSK612-24
TI-ZSK612-32
SFS
SUPER CAT flange

SFS 90
SFS 45
code
TI-NSK113-12-12
TI-NSK113-16-12
TI-NSK113-16-16
TI-NSK113-20-16
TI-NSK113-20-20
TI-NSK113-24-20
TI-NSK113-24-24
TI-NSK113-32-32
code
TI-NSK213-12-12
TI-NSK213-16-12
TI-NSK213-16-16
TI-NSK213-20-16
TI-NSK213-20-20
TI-NSK213-24-20
TI-NSK213-24-24
TI-NSK213-32-32
code
TI-NSK313-12-12
TI-NSK313-16-12
TI-NSK313-16-16
TI-NSK313-20-16
TI-NSK313-20-20
TI-NSK313-24-20
TI-NSK313-24-24
TI-NSK313-32-32

SAE flange seal
TI-USK
O-ring (NBR)
flat (polyurethane)
flange size
[inch]
code
TI-USK110-08
TI-USK110-12
TI-USK110-16
TI-USK110-20
TI-USK110-24
TI-USK110-32
1/2
3/4
1
1.1/4
1.1/2
2
TI-N NON SKIVE
thread
size
[inch]
1.1/16-16
1.5/16-12
1.5/8-12
1.7/8-12
2.1/2-12
AGJ
d x s [mm]
18,64 x 3,53
24,99 x 3,53
32,92 x 3,53
37,69 x 3,53
47,22 x 3,53
56,75 x 3,53
code
TI-USK110-08PU
TI-USK110-12PU
TI-USK110-16PU
TI-USK110-20PU
TI-USK110-24PU
TI-USK110-32PU
JIC UNF thread, 74 cone

DKJ
DKJ 90
D x d x s [mm]
25,40 x 17,02 x 2,79
31,72 x 23,36 x 2,79
39,62 x 31,24 x 2,79
44,45 x 36,07 x 2,79
53,98 x 45,34 x 2,79
63,50 x 54,86 x 2,79
DKJ 45
hose I.D.
[inch]
3/4
3/4
1
1
1.1/4
1.1/2
2
TI-N NON SKIVE
thread
size
[inch]
hose I.D.
[inch]
1.3/16-12
1.7/16-12
1.11/16-12
2-12
3/4
1
1.1/4
1.1/2
code
TI-NJZ110-17-12
TI-NJZ110-21-12
TI-NJZ110-21-16
TI-NJZ110-26-16
TI-NJZ110-26-20
TI-NJZ110-30-24
TI-NJZ110-40-32
AORFS
code
TI-NOZ110-19-12
TI-NOZ110-23-16
TI-NOZ110-27-20
TI-NOZ110-32-24
code
TI-NJW110-17-12
TI-NJW110-21-12
TI-NJW110-21-16
TI-NJW110-26-16
TI-NJW110-26-20
TI-NJW110-30-24
TI-NJW110-40-32
code
TI-NJW210-17-12
TI-NJW210-21-12
TI-NJW210-21-16
TI-NJW210-26-16
TI-NJW210-26-20
TI-NJW210-30-24
TI-NJW210-40-32

ORFS
ORFS 90
code
TI-NOW110-19-12
TI-NOW110-23-16
TI-NOW110-27-20
TI-NOW110-32-24
code
TI-NOW210-19-12
TI-NOW210-23-16
TI-NOW210-27-20
TI-NOW210-32-24
code
TI-NJW310-17-12
TI-NJW310-21-12
TI-NJW310-21-16
TI-NJW310-26-16
TI-NJW310-26-20
TI-NJW310-30-24
TI-NJW310-40-32
ORFS 45
code
TI-NOW310-19-12
TI-NOW310-23-16
TI-NOW310-27-20
TI-NOW310-32-24
739

INTERLOCK fittings - IL type
Crimp ferrules
TI-IL INTERLOCK
IL4
IL13
hose I.D.
[inch]
code
TI-IL4-12*
TI-IL4-16*
TI-IL4-20*
TI-IL4-24*
TI-IL4-32*
3/4
1
1.1/4
1.1/2
2
hose type
4SH / R13 / R15
4SH / R13 / R15
4SH
4SH
4SH
code
hose type
TI-IL13-20*
TI-IL13-24*
TI-IL13-32*
R13 / R15
R13 / R15
R13 / R15

TI-IL INTERLOCK
thread
size
[inch]
hose I.D.
[inch]
3/4
1
1.1/4
1.1/2
2
3/4
1
1.1/4
1.1/2
2
AGR
code
TI-ILBZ110-12-12*
TI-ILBZ110-16-16*
TI-ILBZ110-20-20*
TI-ILBZ110-24-24*
TI-ILBZ110-32-32*

DKOR
DKOR 90
code
TI-ILBW110-12-12*
TI-ILBW110-16-16*
TI-ILBW110-20-20*
TI-ILBW110-24-24*
TI-ILBW110-32-32*
code
TI-ILBW210-12-12*
TI-ILBW210-16-16*
TI-ILBW210-20-20*
TI-ILBW210-24-24*
TI-ILBW210-32-32*
DKOR 45
code
TI-ILBW310-12-12*
TI-ILBW310-16-16*
TI-ILBW310-20-20*
TI-ILBW310-24-24*
TI-ILBW310-32-32*

NPTF thread, 60 cone
AGN
TI-IL INTERLOCK
thread
size
[inch]
hose I.D.
[inch]
3/4
1
1.1/4
1.1/2
2
3/4
1
1.1/4
1.1/2
2
code
TI-ILNZ110-12-12*
TI-ILNZ110-16-16*
TI-ILNZ110-20-20*
TI-ILNZ110-24-24*
TI-ILNZ110-32-32*

TI-IL INTERLOCK
thread
size
[inch]
hose I.D.
[inch]
M30x2
M36x2
M42x2
M52x2
3/4
3/4
1
1.1/4
740
CES
code
TI-ILMZ112-30-12*
TI-ILMZ112-36-12*
TI-ILMZ112-42-16*
TI-ILMZ112-52-20*
Metric thread, 24 cone , O-ring, heavy series

DKOS
DKOS 90
code
TI-ILMW122-30-12*
TI-ILMW122-36-12*
TI-ILMW122-42-16*
TI-ILMW122-52-20*
code
TI-ILMW222-30-12*
TI-ILMW222-36-12*
TI-ILMW222-42-16*
TI-ILMW222-52-20*
DKOS 45
code
TI-ILMW322-30-12*
TI-ILMW322-36-12*
TI-ILMW322-42-16*
TI-ILMW322-52-20*

SAE 3000 flange
TI-IL INTERLOCK
flange size
[inch]
hose I.D.
[inch]
3/4
3/4
3/4
1
1
1.1/4
1.1/4
1.1/2
2
1
1.1/4
1.1/2
2
code
TI-ZSK611-12*
TI-ZSK611-16*
TI-ZSK611-20*
TI-ZSK611-24*
TI-ZSK611-32*
SFL
SFL 90
SFL 45
code
TI-ILSK111-12-12*
TI-ILSK111-16-12*
TI-ILSK111-16-16*
TI-ILSK111-20-16*
TI-ILSK111-20-20*
TI-ILSK111-24-20*
TI-ILSK111-24-24*
TI-ILSK111-32-32*
code
TI-ILSK211-12-12*
TI-ILSK211-16-12*
TI-ILSK211-16-16*
TI-ILSK211-20-16*
TI-ILSK211-20-20*
TI-ILSK211-24-20*
TI-ILSK211-24-24*
TI-ILSK211-32-32*
code
TI-ILSK311-12-12*
TI-ILSK311-16-12*
TI-ILSK311-16-16*
TI-ILSK311-20-16*
TI-ILSK311-24-20*
TI-ILSK311-24-24*
-

SAE 6000 flange
TI-IL INTERLOCK
flange size
[inch]
hose I.D.
[inch]
3/4
3/4
3/4
1
1
1.1/4
1.1/4
1.1/2
1.1/2
2
1
1.1/4
1.1/2
2
2
code
TI-ZSK612-12*
TI-ZSK612-16*
TI-ZSK612-20*
TI-ZSK612-24*
TI-ZSK612-32*
SFS
SFS 90
SFS 45
code
TI-ILSK112-12-12*
TI-ILSK112-16-12*
TI-ILSK112-16-16*
TI-ILSK112-20-16*
TI-ILSK112-20-20*
TI-ILSK112-24-20*
TI-ILSK112-24-24*
TI-ILSK112-32-24*
TI-ILSK112-32-32*
code
TI-ILSK212-12-12*
TI-ILSK212-16-12*
TI-ILSK212-16-16*
TI-ILSK212-20-16*
TI-ILSK212-20-20*
TI-ILSK212-24-20*
TI-ILSK212-24-24*
TI-ILSK212-32-24*
TI-ILSK212-32-32*
code
TI-ILSK312-12-12*
TI-ILSK312-16-12*
TI-ILSK312-16-16*
TI-ILSK312-20-16*
TI-ILSK312-20-20*
TI-ILSK312-24-20*
TI-ILSK312-24-24*
TI-ILSK312-32-32*
TI-IL INTERLOCK
flange size
[inch]
hose I.D.
[inch]
3/4
3/4
3/4
1
1
1.1/4
1.1/4
1.1/2
1
1.1/4
1.1/2
SFS
SUPER CAT flange

SFS 90
SFS 45
code
TI-ILSK113-12-12*
TI-ILSK113-16-12*
TI-ILSK113-16-16*
TI-ILSK113-20-16*
TI-ILSK113-20-20*
TI-ILSK113-24-20*
TI-ILSK113-24-24*
code
TI-ILSK213-12-12*
TI-ILSK213-16-12*
TI-ILSK213-16-16*
TI-ILSK213-20-16*
TI-ILSK213-20-20*
TI-ILSK213-24-20*
TI-ILSK213-24-24*
code
TI-ILSK313-12-12*
TI-ILSK313-16-12*
TI-ILSK313-16-16*
TI-ILSK313-20-16*
TI-ILSK313-20-20*
TI-ILSK313-24-20*
TI-ILSK313-24-24*
741

SAE flange seal
TI-USK
O-ring (NBR)
flat (polyurethane)
flange size
[inch]
code
TI-USK110-12
TI-USK110-16
TI-USK110-20
TI-USK110-24
TI-USK110-32
3/4
1
1.1/4
1.1/2
2
TI-IL INTERLOCK
thread
size
[inch]
hose I.D.
[inch]
1.1/16
1.5/16
1.5/8
1.7/8
2.1/2
3/4
1
1.1/4
1.1/2
2
AGJ
code
TI-ILJZ110-17-12*
TI-ILJZ110-21-16*
TI-ILJZ110-26-20*
TI-ILJZ110-30-24*
TI-ILJZ110-40-32*
d x s [mm]
24,99 x 3,53
32,92 x 3,53
37,69 x 3,53
47,22 x 3,53
56,75 x 3,53
code
TI-USK110-12PU
TI-USK110-16PU
TI-USK110-20PU
TI-USK110-24PU
TI-USK110-32PU
JIC UNF thread, 74 cone

DKJ
DKJ 90
code
TI-ILJW110-17-12*
TI-ILJW110-21-16*
TI-ILJW110-26-20*
TI-ILJW110-30-24*
TI-ILJW110-40-32*
code
TI-ILJW210-17-12*
TI-ILJW210-21-16*
TI-ILJW210-26-20*
TI-ILJW210-30-24*
TI-ILJW210-40-32*
D x d x s [mm]
31,72 x 23,36 x 2,79
39,62 x 31,24 x 2,79
44,45 x 36,07 x 2,79
53,98 x 45,34 x 2,79
63,50 x 54,86 x 2,79
DKJ 45
code
TI-ILJW310-17-12*
TI-ILJW310-21-16*
TI-ILJW310-26-20*
TI-ILJW310-30-24*
TI-ILJW310-40-32*
TI-IL INTERLOCK
thread
size
[inch]
hose I.D.
[inch]
1.3/16
1.7/16
1.11/16
2
3/4
1
1.1/4
1.1/2
742
ORFS

ORFS 90
ORFS 45
code
TI-ILOW110-19-12*
TI-ILOW110-23-16*
TI-ILOW110-27-20*
TI-ILOW110-32-24*
code
TI-ILOW210-19-12*
TI-ILOW210-23-16*
TI-ILOW210-27-20*
TI-ILOW210-32-24*
code
TI-ILOW310-19-12*
TI-ILOW310-23-16*
TI-ILOW310-27-20*
TI-ILOW310-32-24*

Reusable fittings - S type
TI-S REUSABLE
Ferrules for non-skived rubber hoses
hose I.D.
[inch]
1/4
5/16
3/8
1/2
5/8
3/4
1
code
TI-S1T-04
TI-S1T-05
TI-S1T-06
TI-S1T-08
TI-S1T-10
TI-S1T-12
TI-S1T-16
hose type
1SN
TI-S REUSABLE
code
TI-S2T-04
TI-S2T-05
TI-S2T-06
TI-S2T-08
TI-S2T-10
TI-S2T-12
TI-S2T-16
hose type
2SN
Ferrules for thermoplastic hoses
hose I.D.
[inch]
5/32
3/16
1/4
5/16
3/8
code
hose type
TI-SMT1-04
TI-SMT1-05
TI-SMT1-06
MT1 / MTH1
TI-S REUSABLE
code
TI-SOL5-025*
TI-SOL5-03
TI-SOL5-04
hose type
OL5 / VE5 (4x8 mm)
OL5 / VE5
Ferrules for thermoplastic hoses
hose I.D.
[inch]
3/16
1/4
5/16
3/8
1/2
code
TI-SR7-03
TI-SR7-04
TI-SR7-04M
TI-SR7-05
TI-SR7-06
TI-SR7-08
hose type
SAE100R7 / MT1 / MTH1
SAE100R7
OL7M / VE7
SAE100R7
SAE100R7 / MT1 / MTH1
* - only for 4x8 mm hoses.
743

Reusable fittings S type
AGR-K
TI-S REUSABLE
thread
size
[inch]
hose
I.D.
[inch]
1/8
1/4
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
3/8
1/2
3/4
1
TI-S REUSABLE
thread
size
[inch]
1/8
1/4
3/8
1/2
5/8
3/4
1
4
6
8
10
12
15
18
22
28
5/32
3/16
5/32
3/16
1/4
5/16
5/16
3/8
1/2
5/8
3/4
1
DKR
code
TI-SBZ110-02-03
TI-SBZ110-04-04
TI-SBZ110-06-05
TI-SBZ110-06-06
TI-SBZ110-08-08
TI-SBZ110-10-10
TI-SBZ110-12-12
TI-SBZ110-16-16
code
TI-SBW110-02-025*
TI-SBW110-02-03
TI-SBW110-04-025*
TI-SBW110-04-03
TI-SBW110-04-04
TI-SBW110-04-05
TI-SBW110-06-05
TI-SBW110-06-06
TI-SBW110-08-08
TI-SBW110-10-10
TI-SBW110-12-12
TI-SBW110-16-16
DKR 45
CEL
code
TI-SBW210-02-025*
TI-SBW210-02-03
TI-SBW210-04-025*
TI-SBW210-04-03
TI-SBW210-04-04
TI-SBW210-04-05
TI-SBW210-06-05
TI-SBW210-06-06
TI-SBW210-08-08
TI-SBW210-10-10
TI-SBW210-12-12
TI-SBW210-16-16
Metric standpipe, light series

BEL
BEL 90
code
TI-SBW310-02-03
TI-SBW310-04-03
TI-SBW310-04-04
TI-SBW310-06-05
TI-SBW310-06-06
TI-SBW310-08-08
TI-SBW310-10-10
TI-SBW310-12-12
TI-SBW310-16-16
BEL 45
hose
I.D.
[inch]
5/32
3/16
1/4
1/4
5/16
3/8
3/8
1/2
5/8
3/4
1
* - only for 4 x 8 mm hoses.
744
BSP thread, 60 cone

DKR 90
AGR
hose
I.D.
[inch]
TI-S REUSABLE
pipe
O.D.
[mm]
code
TI-SBZ130-02-03
TI-SBZ130-04-04
TI-SBZ130-06-05
TI-SBZ130-06-06
TI-SBZ130-08-08
TI-SBZ130-12-10
TI-SBZ130-12-12
TI-SBZ130-16-16
code
TI-SMZ111-14-04
TI-SMZ111-16-05
TI-SMZ111-18-06
TI-SMZ111-22-08
-
code
TI-SMR111-04-025*
TI-SMR111-04-03
TI-SMR111-06-04
TI-SMR111-08-04
TI-SMR111-10-05
TI-SMR111-12-06
TI-SMR111-15-06
TI-SMR111-15-08
TI-SMR111-18-10
TI-SMR111-22-12
TI-SMR111-28-16
code
TI-SMR211-04-025*
TI-SMR211-04-03
TI-SMR211-06-04
TI-SMR211-08-04
TI-SMR211-10-05
TI-SMR211-12-06
TI-SMR211-15-06
TI-SMR211-15-08
TI-SMR211-18-10
TI-SMR211-22-12
TI-SMR211-28-16
code
TI-SMR311-04-03
TI-SMR311-06-04
TI-SMR311-08-04
TI-SMR311-10-05
TI-SMR311-12-06
TI-SMR311-15-08
TI-SMR311-18-10
TI-SMR311-22-12
-

Reusable fittings S type
TI-S REUSABLE
pipe
O.D.
[mm]
6
8
10
12
14
16
20
25
30
1/8
1/4
3/8
1/2
3/4
5/32
3/16
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
M10
M12
M16
M18
M20
BES 45
code
TI-SMZ112-18-04
TI-SMZ112-22-06
TI-SMZ112-24-08
-
code
TI-SMR112-06-025*
TI-SMR112-06-03
TI-SMR112-08-03
TI-SMR112-10-04
TI-SMR112-12-05
TI-SMR112-14-06
TI-SMR112-16-08
TI-SMR112-20-10
TI-SMR112-25-12
TI-SMR112-30-16
code
TI-SMR212-06-025*
TI-SMR212-06-03
TI-SMR212-08-03
TI-SMR212-10-04
TI-SMR212-12-05
TI-SMR212-14-06
TI-SMR212-16-08
TI-SMR212-20-10
TI-SMR212-25-12
-
code
TI-SMR312-06-03
TI-SMR312-10-04
TI-SMR312-12-05
TI-SMR312-14-06
TI-SMR312-16-08
TI-SMR312-20-10
TI-SMR312-25-12
-
copper seal
RNR
bolt
double bolt
code
code
TI-SBB600-02-025*
TI-SBB600-02-03
TI-SBB600-02-04
TI-SBB600-04-03
TI-SBB600-04-04
TI-SBB600-06-04
TI-SBB600-06-05
TI-SBB600-06-06
TI-SBB600-08-06
TI-SBB600-08-08
TI-SBB600-12-10
TI-SBB600-12-12
code
code
TI-ZBB610-02
TI-ZBB620-02
TI-ZBB610-04
TI-ZBB620-04
TI-ZBB610-06
TI-ZBB620-06
TI-ZBB610-08
TI-ZBB620-08
TI-ZBB610-12
TI-ZBB620-12
BANJO imperial
hose
I.D.
[inch]
5/32
3/16
1/4
3/16
1/4
1/4
5/16
3/8
3/8
1/2
5/8
3/4
TI-S REUSABLE
thread
size
[mm]
Metric standpipe, heavy series

BES
BES 90
hose
I.D.
[inch]
TI-S REUSABLE
thread
size
[inch]
CES
TI-UM-10/16
TI-UM-13/19
TI-UM-17/21
TI-UM-21/26
TI-UM-27/33
BANJO metric
copper seal
RNM
bolt
double
code
code
TI-SMB600-10-025*
TI-SMB600-10-03
TI-SMB600-10-04
TI-SMB600-12-04
TI-SMB600-16-05
TI-SMB600-18-05
TI-SMB600-18-06
TI-SMB600-18-08
TI-SMB600-20-06
code
code
TI-ZMB610-10/1
TI-ZMB620-10/1
TI-ZMB610-12/1,5
TI-ZMB610-16/1,5
TI-ZMB610-12/1,5
TI-ZMB610-16/1,5
TI-ZMB610-18/1,5
TI-ZMB620-18/1,5
TI-ZMB610-20/1,5
TI-ZMB620-20/1,5
hose
I.D.
[inch]
5/32
3/16
1/4
1/4
5/16
5/16
3/8
1/2
3/8
TI-UM-10/16
TI-UM-12/18
TI-UM-16/22
TI-UM-18/24
TI-UM-20/26
* - only for 4 x 8 mm hoses.
745
HIGH PRESSURE - adaptors

BSP (BSPT) adaptors
2 x BSP male thread 60
BSPT male thread/ BSP male thread 60
A101
code
(carbon steel)
code
(stainless steel)
thread
size
[inch]
thread
size
[inch]
TI-A101-02-02
TI-A101-02-04
TI-A101-02-06
TI-A101-02-08
TI-A101-04-04
TI-A101-04-06
TI-A101-04-08
TI-A101-04-10
TI-A101-04-12
TI-A101-04-16
TI-A101-06-06
TI-A101-06-08
TI-A101-06-10
TI-A101-06-12
TI-A101-06-16
TI-A101-08-08
TI-A101-08-10
TI-A101-08-12
TI-A101-08-16
TI-A101-08-20
TI-A101-08-24
TI-A101-10-10
TI-A101-10-12
TI-A101-10-16
TI-A101-12-12
TI-A101-12-16
TI-A101-12-20
TI-A101-12-24
TI-A101-16-16
TI-A101-16-20
TI-A101-16-24
TI-A101-16-32
TI-A101-20-20
TI-A101-20-24
TI-A101-20-32
TI-A101-24-24
TI-A101-24-32
TI-A101-32-32
TI-A101-32-40
TI-A101-32-48
TI-A101-40-40
TI-A101-40-48
TI-A101-48-48
TI-A101-02-02SS
TI-A101-02-04SS
TI-A101-04-04SS
TI-A101-04-06SS
TI-A101-04-08SS
TI-A101-06-06SS
TI-A101-06-08SS
TI-A101-06-12SS
TI-A101-08-08SS
TI-A101-08-10SS
TI-A101-08-12SS
TI-A101-08-16SS
TI-A101-10-10SS
TI-A101-10-12SS
TI-A101-12-12SS
TI-A101-12-16SS
TI-A101-12-20SS
TI-A101-16-16SS
TI-A101-16-20SS
TI-A101-16-24SS
TI-A101-20-20SS
TI-A101-20-24SS
TI-A101-20-32SS
TI-A101-24-24SS
TI-A101-24-32SS
TI-A101-32-32SS
-
1/8
1/8
1/8
1/8
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
3/4
3/4
1
1
1
1
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
2
2
2
2.1/2
2.1/2
3
1/8
1/4
3/8
1/2
1/4
3/8
1/2
5/8
3/4
1
3/8
1/2
5/8
3/4
1
1/2
5/8
3/4
1
1.1/4
1.1/2
5/8
3/4
1
3/4
1
1.1/4
1.1/2
1
1.1/4
1.1/2
2
1.1/4
1.1/2
2
1.1/2
2
2
2.1/2
3
2.1/2
3
3
746
A102
code
(carbon steel)
code
(stainless steel)
TI-A102-02-02
TI-A102-02-04
TI-A102-04-02
TI-A102-04-04
TI-A102-04-06
TI-A102-04-08
TI-A102-06-04
TI-A102-06-06
TI-A102-06-08
TI-A102-08-04
TI-A102-08-06
TI-A102-08-08
TI-A102-08-12
TI-A102-08-16
TI-A102-12-04
TI-A102-12-06
TI-A102-12-08
TI-A102-12-12
TI-A102-12-16
TI-A102-16-08
TI-A102-16-12
TI-A102-16-16
TI-A102-16-20
TI-A102-20-16
TI-A102-20-20
TI-A102-24-24
TI-A102-24-32
TI-A102-32-32
TI-A102-40-40
TI-A102-48-48
TI-A102-02-02SS
TI-A102-04-02SS
TI-A102-04-04SS
TI-A102-04-08SS
TI-A102-04-12SS
TI-A102-06-04SS
TI-A102-06-06SS
TI-A102-08-04SS
TI-A102-08-06SS
TI-A102-08-08SS
TI-A102-12-04SS
TI-A102-12-06SS
TI-A102-12-08SS
TI-A102-12-10SS
TI-A102-12-12SS
TI-A102-16-12SS
TI-A102-16-16SS
TI-A102-16-20SS
TI-A102-20-16SS
TI-A102-20-20SS
TI-A102-24-20SS
TI-A102-24-24SS
TI-A102-32-24SS
TI-A102-32-32SS
-
BSPT
thread
size
[inch]
1/8
1/8
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
2
2
2.1/2
3
BSP
thread
size
[inch]
1/8
1/4
1/8
1/4
3/8
1/2
3/4
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1
1/4
3/8
1/2
5/8
3/4
1
1/2
3/4
1
1.1/4
1
1.1/4
1.1/4
1.1/2
2
1.1/2
2
2.1/2
3

BSP (BSPT) adaptors
BSP male thread 60 / BSP female thread
BSP male thread 60/ female thread 60
A103
code
(carbon steel)
code
(stainless steel)
TI-A103-02-02
TI-A103-02-04
TI-A103-02-06
TI-A103-02-08
TI-A103-04-02
TI-A103-04-04
TI-A103-04-06
TI-A103-04-08
TI-A103-04-12
TI-A103-06-04
TI-A103-06-06
TI-A103-06-08
TI-A103-06-12
TI-A103-06-16
TI-A103-08-02
TI-A103-08-04
TI-A103-08-06
TI-A103-08-08
TI-A103-08-12
TI-A103-08-16
TI-A103-08-20
TI-A103-12-04
TI-A103-12-06
TI-A103-12-08
TI-A103-12-12
TI-A103-12-16
TI-A103-12-20
TI-A103-12-24
TI-A103-16-04
TI-A103-16-06
TI-A103-16-08
TI-A103-16-12
TI-A103-16-16
TI-A103-16-20
TI-A103-16-24
TI-A103-16-32
TI-A103-20-08
TI-A103-20-12
TI-A103-20-16
TI-A103-20-20
TI-A103-20-24
TI-A103-20-32
TI-A103-24-08
TI-A103-24-12
TI-A103-24-16
TI-A103-24-20
TI-A103-24-24
TI-A103-24-32
TI-A103-32-16
TI-A103-32-20
TI-A103-32-24
TI-A103-32-32
TI-A103-02-04SS
TI-A103-04-02SS
TI-A103-04-04SS
TI-A103-04-08SS
TI-A103-06-04SS
TI-A103-06-06SS
TI-A103-06-08SS
TI-A103-08-04SS
TI-A103-08-06SS
TI-A103-08-08SS
TI-A103-08-12SS
TI-A103-12-06SS
TI-A103-12-08SS
TI-A103-12-12SS
TI-A103-12-16SS
TI-A103-16-12SS
TI-A103-16-16SS
TI-A103-16-20SS
TI-A103-20-16SS
TI-A103-20-20SS
TI-A103-24-20SS
TI-A103-24-24SS
TI-A103-24-32SS
TI-A103-32-24SS
TI-A103-32-32SS
male
thread
size
[inch]
1/8
1/8
1/8
1/8
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1
1
1
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
1.1/2
2
2
2
2
female
thread
size
[inch]
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
3/4
1/4
3/8
1/2
3/4
1
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
1/2
3/4
1
1.1/4
1.1/2
2
1/2
3/4
1
1.1/4
1.1/2
2
1
1.1/4
1.1/2
2
A104
code
(carbon steel)
code
(stainless steel)
TI-A104-02-02
TI-A104-04-04
TI-A104-04-06
TI-A104-04-08
TI-A104-06-02
TI-A104-06-04
TI-A104-06-06
TI-A104-06-08
TI-A104-06-12
TI-A104-08-04
TI-A104-08-06
TI-A104-08-08
TI-A104-08-10
TI-A104-08-12
TI-A104-08-16
TI-A104-10-10
TI-A104-12-06
TI-A104-12-08
TI-A104-12-12
TI-A104-12-16
TI-A104-16-08
TI-A104-16-12
TI-A104-16-16
TI-A104-20-20
TI-A104-24-24
TI-A104-32-32
TI-A104-02-04SS
TI-A104-04-04SS
TI-A104-04-06SS
TI-A104-06-06SS
TI-A104-06-08SS
TI-A104-08-08SS
TI-A104-08-12SS
TI-A104-12-12SS
TI-A104-12-16SS
TI-A104-16-16SS
TI-A104-16-20SS
TI-A104-20-20SS
TI-A104-20-24SS
TI-A104-24-24SS
-
male
thread
size
[inch]
1/8
1/8
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
5/8
3/4
3/4
3/4
3/4
1
1
1
1
1.1/4
1.1/4
1.1/2
2
female
thread
size
[inch]
1/8
1/4
1/4
3/8
1/2
1/8
1/4
3/8
1/2
3/4
1/4
3/8
1/2
5/8
3/4
1
5/8
3/8
1/2
3/4
1
1/2
3/4
1
1.1/4
1.1/4
1.1/2
1.1/2
2
2 x BSP female thread 60
A105
code
(carbon steel)
code
(stainless steel)
thread size
[inch]
TI-A105-02
TI-A105-04
TI-A105-06
TI-A105-08
TI-A105-10
TI-A105-12
TI-A105-16
TI-A105-20
TI-A105-24
TI-A105-32
TI-A105-04SS
TI-A105-06SS
TI-A105-08SS
TI-A105-12SS
TI-A105-16SS
-
1/8
1/4
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
747

BSP (BSPT) adaptors
2 x BSP female thread
A106
code
(carbon steel)
code
(stainless steel)
TI-A106-02-02
TI-A106-02-04
TI-A106-04-04
TI-A106-06-06
TI-A106-08-08
TI-A106-08-16
TI-A106-12-12
TI-A106-12-16
TI-A106-16-16
TI-A106-20-20
TI-A106-24-24
TI-A106-04-04SS
TI-A106-06-06SS
TI-A106-08-08SS
TI-A106-12-12SS
TI-A106-16-16SS
-
thread
size
[inch]
1/8
1/8
1/4
3/8
1/2
1/2
3/4
3/4
1
1.1/4
1.1/2
thread
size
[inch]
1/8
1/4
1/4
3/8
1/2
1
3/4
1
1
1.1/4
1.1/2
A107
code
(carbon steel)
code
(stainless steel)
thread size
[inch]
TI-A107-04
TI-A107-06
TI-A107-08
TI-A107-12
TI-A107-16
TI-A107-20
TI-A107-04SS
TI-A107-06SS
TI-A107-08SS
TI-A107-12SS
TI-A107-16SS
-
1/4
3/8
1/2
3/4
1
1.1/4
Use A108 nut for A107 adaptor
BSP thread
A109
A108
code
(carbon steel)
code
(stainless steel)
thread size
[inch]
TI-A108-02
TI-A108-04
TI-A108-06
TI-A108-08
TI-A108-12
TI-A108-16
TI-A108-20
TI-A108-04SS
TI-A108-06SS
TI-A108-08SS
TI-A108-12SS
TI-A108-16SS
-
1/8
1/4
3/8
1/2
3/4
1
1.1/4
BSPT male thread / BSP male thread 60
A110
code
(carbon steel)
code
(stainless steel)
thread size
[inch]
TI-A110-02
TI-A110-04
TI-A110-06
TI-A110-08
TI-A110-12
TI-A110-16
TI-A110-20
TI-A110-02SS
TI-A110-04SS
TI-A110-06SS
TI-A110-08SS
TI-A110-12SS
TI-A110-16SS
-
1/8
1/4
3/8
1/2
3/4
1
1.1/4
748
code
(carbon steel)
code
(stainless steel)
thread size
[inch]
TI-A109-02
TI-A109-04
TI-A109-06
TI-A109-08
TI-A109-10
TI-A109-12
TI-A109-16
TI-A109-20
TI-A109-04SS
TI-A109-06SS
TI-A109-08SS
TI-A109-12SS
TI-A109-16SS
TI-A109-20SS
1/8
1/4
3/8
1/2
5/8
3/4
1
1.1/4
A111
code
(carbon steel)
code
(stainless steel)
thread size
[inch]
TI-A111-02
TI-A111-04
TI-A111-06
TI-A111-08
TI-A111-12
TI-A111-16
TI-A111-20
TI-A111-24
TI-A111-04SS
TI-A111-06SS
TI-A111-08SS
TI-A111-12SS
TI-A111-16SS
-
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2

BSP (BSPT) adaptors
BSP female thread 60
BSP male thread 60
A112
code
(carbon steel)
TI-A112-02
TI-A112-04
TI-A112-06
TI-A112-08
TI-A112-10
TI-A112-12
TI-A112-16
TI-A112-20
TI-A112-24
TI-A112-32
code
(stainless steel)
TI-A112-04SS
TI-A112-06SS
TI-A112-08SS
TI-A112-12SS
TI-A112-16SS
TI-A112-20SS
TI-A112-24SS
TI-A112-32SS
thread size
[inch]
1/8
1/4
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
BSP male thread / BSP female thread
A113
code
(carbon steel)
TI-A113-02
TI-A113-04
TI-A113-06
TI-A113-08
TI-A113-10
TI-A113-12
TI-A113-16
TI-A113-20
TI-A113-24
TI-A113-32
code
(stainless steel)
TI-A113-02SS
TI-A113-04SS
TI-A113-06SS
TI-A113-08SS
TI-A113-12SS
TI-A113-16SS
TI-A113-20SS
TI-A113-24SS
TI-A113-32SS
A114
code
(carbon steel)
TI-A114-02
TI-A114-04
TI-A114-06
TI-A114-08
TI-A114-10
TI-A114-12
TI-A114-16
TI-A114-20
TI-A114-24
TI-A114-32
code
(stainless steel)
TI-A114-04SS
TI-A114-06SS
TI-A114-08SS
TI-A114-12SS
TI-A114-16SS
TI-A114-20SS
TI-A114-24SS
TI-A114-32SS
thread size
[inch]
1/8
1/4
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
2 x BSP male thread
A115
code
(carbon steel)
TI-A115-02
TI-A115-04
TI-A115-06
TI-A115-08
TI-A115-10
TI-A115-12
TI-A115-16
TI-A115-20
TI-A115-24
TI-A115-32
code
(stainless steel)
TI-A115-04SS
TI-A115-06SS
TI-A115-08SS
TI-A115-12SS
TI-A115-16SS
TI-A115-20SS
-
code
(stainless steel)
TI-A116-02SS
TI-A116-04SS
TI-A116-06SS
TI-A116-08SS
TI-A116-12SS
TI-A116-16SS
TI-A116-20SS
thread size
[inch]
1/8
1/4
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
A116
code
(carbon steel)
TI-A116-02
TI-A116-04
TI-A116-06
TI-A116-08
TI-A116-12
TI-A116-16
-
thread size
[inch]
1/8
1/4
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
thread size
[inch]
1/8
1/4
3/8
1/2
3/4
1
1.1/4
A117
code
(carbon steel)
TI-A117-04
TI-A117-06
TI-A117-08
TI-A117-12
TI-A117-16
code
(stainless steel)
TI-A117-04SS
TI-A117-06SS
TI-A117-08SS
TI-A117-12SS
TI-A117-16SS
thread size
[inch]
1/4
3/8
1/2
3/4
1
749

BSP (BSPT) adaptors
BSP male thread / SAE 3000 flange
A119
A118
code
(carbon steel)
code
(stainless steel)
thread
size
[inch]
flange
size
[inch]
code
(carbon steel)
code
(stainless steel)
thread
size
[inch]
flange
size
[inch]
TI-A118-08
TI-A118-12
TI-A118-16
TI-A118-20
TI-A118-24
TI-A118-32
1/2
3/4
1
1.1/4
1.1/2
2
1/2
3/4
1
1.1/4
1.1/2
2
TI-A119-08
TI-A119-12
TI-A119-16
TI-A119-20
TI-A119-24
TI-A119-32
1/2
3/4
1
1.1/4
1.1/2
2
1/2
3/4
1
1.1/4
1.1/2
2
A120
A121
code
(carbon steel)
code
(stainless steel)
thread
size
[inch]
flange
size
[inch]
code
(carbon steel)
code
(stainless steel)
thread
size
[inch]
flange
size
[inch]
TI-A120-08
TI-A120-12
TI-A120-16
TI-A120-20
TI-A120-24
TI-A120-32
1/2
3/4
1
1.1/4
1.1/2
2
1/2
3/4
1
1.1/4
1.1/2
2
TI-A121-08
TI-A121-12
TI-A121-16
TI-A121-20
TI-A121-24
TI-A121-32
1/2
3/4
1
1.1/4
1.1/2
2
1/2
3/4
1
1.1/4
1.1/2
2
A122
A123
code
(carbon steel)
code
(stainless steel)
thread
size
[inch]
flange
size
[inch]
code
(carbon steel)
code
(stainless steel)
thread
size
[inch]
flange
size
[inch]
TI-A122-08
TI-A122-12
TI-A122-16
TI-A122-20
TI-A122-24
TI-A122-32
1/2
3/4
1
1.1/4
1.1/2
2
1/2
3/4
1
1.1/4
1.1/2
2
TI-A123-08
TI-A123-12
TI-A123-16
TI-A123-20
TI-A123-24
TI-A123-32
1/2
3/4
1
1.1/4
1.1/2
2
1/2
3/4
1
1.1/4
1.1/2
2
750

BSP (BSPT) / NPT adaptors
BSPT male thread / NPT male thread
BSP male thread 60 / NPT male thread
A201
code
(carbon steel)
code
(stainless steel)
TI-A201-02-02
TI-A201-04-04
TI-A201-04-06
TI-A201-06-04
TI-A201-06-06
TI-A201-08-08
TI-A201-12-12
TI-A201-16-12
TI-A201-16-16
TI-A201-16-20
TI-A201-20-20
TI-A201-24-24
TI-A201-32-32
BSPT
thread
size
[inch]
1/8
1/4
1/4
3/8
3/8
1/2
3/4
1
1
1
1.1/4
1.1/2
2
NPT
thread
size
[inch]
1/8
1/4
3/8
1/4
3/8
1/2
3/4
3/4
1
1.1/4
1.1/4
1.1/2
2
A203
code
(carbon steel)
code
(stainless steel)
TI-A203-02-02
TI-A203-02-04
TI-A203-04-04
TI-A203-04-06
TI-A203-06-04
TI-A203-06-06
TI-A203-08-04
TI-A203-08-08
TI-A203-12-12
TI-A203-16-16
TI-A203-20-20
TI-A203-24-24
TI-A203-32-32
TI-A203-02-02SS
TI-A203-02-04SS
TI-A203-04-04SS
TI-A203-04-06SS
TI-A203-06-04SS
TI-A203-06-06SS
TI-A203-08-04SS
TI-A203-08-08SS
TI-A203-12-12SS
TI-A203-16-16SS
TI-A203-20-20SS
TI-A203-24-24SS
TI-A203-32-32SS
BSP
thread
size
[inch]
1/8
1/8
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
1.1/4
1.1/2
2
NPT
thread
size
[inch]
1/8
1/4
1/4
3/8
1/4
3/8
1/4
1/2
3/4
1
1.1/4
1.1/2
2
A202
code
(carbon steel)
code
(stainless steel)
TI-A202-02-02
TI-A202-02-04
TI-A202-04-02
TI-A202-04-04
TI-A202-04-06
TI-A202-04-08
TI-A202-06-04
TI-A202-06-06
TI-A202-06-08
TI-A202-06-12
TI-A202-08-04
TI-A202-08-06
TI-A202-08-08
TI-A202-08-12
TI-A202-08-16
TI-A202-10-08
TI-A202-10-12
TI-A202-12-08
TI-A202-12-12
TI-A202-12-16
TI-A202-16-08
TI-A202-16-12
TI-A202-16-16
TI-A202-16-20
TI-A202-20-16
TI-A202-20-20
TI-A202-20-24
TI-A202-24-20
TI-A202-24-24
TI-A202-24-32
TI-A202-32-24
TI-A202-32-32
TI-A202-02-02SS
TI-A202-02-04SS
TI-A202-04-02SS
TI-A202-04-04SS
TI-A202-04-06SS
TI-A202-04-08SS
TI-A202-06-04SS
TI-A202-06-06SS
TI-A202-06-08SS
TI-A202-06-12SS
TI-A202-08-04SS
TI-A202-08-06SS
TI-A202-08-08SS
TI-A202-08-12SS
TI-A202-10-12SS
TI-A202-12-08SS
TI-A202-12-12SS
TI-A202-12-16SS
TI-A202-16-12SS
TI-A202-16-16SS
TI-A202-16-20SS
TI-A202-20-16SS
TI-A202-20-20SS
TI-A202-20-24SS
TI-A202-24-20SS
TI-A202-24-24SS
TI-A202-24-32SS
TI-A202-32-24SS
TI-A202-32-32SS
BSP
thread
size
[inch]
1/8
1/8
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
5/8
5/8
3/4
3/4
3/4
1
1
1
1
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
2
2
NPT
thread
size
[inch]
1/8
1/4
1/8
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1/4
3/8
1/2
3/4
1
1/2
3/4
1/2
3/4
1
1/2
3/4
1
1.1/4
1
1.1/4
1.1/2
1.1/4
1.1/2
2
1.1/2
2
751

BSP (BSPT) / NPT adaptors
BSP female thread 60 / NPT male thread
BSP female thread / NPT male thread
A204
code
(carbon steel)
code
(stainless steel)
TI-A204-04-04
TI-A204-04-06
TI-A204-06-04
TI-A204-06-06
TI-A204-06-08
TI-A204-08-06
TI-A204-08-08
TI-A204-12-12
TI-A204-16-16
TI-A204-04-04SS
TI-A204-04-06SS
TI-A204-06-04SS
TI-A204-06-06SS
TI-A204-06-08SS
TI-A204-08-06SS
TI-A204-08-08SS
TI-A204-12-12SS
TI-A204-16-16SS
BSP
thread
size
[inch]
1/4
1/4
3/8
3/8
3/8
1/2
1/2
3/4
1
NPT
thread
size
[inch]
1/4
3/8
1/4
3/8
1/2
3/8
1/2
3/4
1
A206
code
(carbon steel)
code
(stainless steel)
TI-A206-02-02
TI-A206-04-02
TI-A206-04-04
TI-A206-06-04
TI-A206-06-06
TI-A206-06-08
TI-A206-08-06
TI-A206-08-08
TI-A206-12-08
TI-A206-12-12
TI-A206-16-16
TI-A206-16-20
TI-A206-24-24
TI-A206-32-32
752
BSP
thread
size
[inch]
1/8
1/4
1/4
3/8
3/8
3/8
1/2
1/2
3/4
3/4
1
1
1.1/2
2
NPT
thread
size
[inch]
1/8
1/8
1/4
1/4
3/8
1/2
3/8
1/2
1/2
3/4
1
1.1/4
1.1/2
2
A205
code
(carbon steel)
code
(stainless steel)
TI-A205-02-02
TI-A205-02-04
TI-A205-02-06
TI-A205-04-04
TI-A205-04-06
TI-A205-06-06
TI-A205-06-08
TI-A205-08-08
TI-A205-08-16
TI-A205-12-12
TI-A205-16-16
TI-A205-20-20
TI-A205-24-24
TI-A205-32-32
TI-A205-02-02SS
TI-A205-02-04SS
TI-A205-04-04SS
TI-A205-04-06SS
TI-A205-06-06SS
TI-A205-06-08SS
TI-A205-08-08SS
TI-A205-08-16SS
TI-A205-12-12SS
TI-A205-16-16SS
TI-A205-20-20SS
TI-A205-24-24SS
-
BSP
thread
size
[inch]
1/8
1/8
1/8
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
1.1/4
1.1/2
2
NPT
thread
size
[inch]
1/8
1/4
3/8
1/4
3/8
3/8
1/2
1/2
1
3/4
1
1.1/4
1.1/2
2

2 x NPT male thread
NPT adaptors
NPT male / female thread
A301
A303
code
(carbon steel)
code
(stainless steel)
TI-A303-02-02
TI-A303-02-04
TI-A303-02-06
TI-A303-04-02
TI-A303-04-04
TI-A303-04-06
TI-A303-04-08
TI-A303-06-02
TI-A303-06-04
TI-A303-06-06
TI-A303-06-08
TI-A303-08-02
TI-A303-08-04
TI-A303-08-06
TI-A303-08-08
TI-A303-08-12
TI-A303-08-16
TI-A303-12-04
TI-A303-12-06
TI-A303-12-08
TI-A303-12-12
TI-A303-12-20
TI-A303-16-04
TI-A303-16-06
TI-A303-16-08
TI-A303-16-12
TI-A303-16-20
TI-A303-20-08
TI-A303-20-12
TI-A303-20-16
TI-A303-20-24
TI-A303-24-12
TI-A303-24-16
TI-A303-24-20
TI-A303-32-16
TI-A303-32-20
TI-A303-32-24
TI-A303-02-02SS
TI-A303-02-04SS
TI-A303-04-02SS
TI-A303-04-04SS
TI-A303-04-06SS
TI-A303-04-08SS
TI-A303-06-02SS
TI-A303-06-04SS
TI-A303-06-06SS
TI-A303-06-08SS
TI-A303-08-04SS
TI-A303-08-06SS
TI-A303-08-08SS
TI-A303-08-12SS
TI-A303-12-04SS
TI-A303-12-06SS
TI-A303-12-08SS
TI-A303-12-12SS
TI-A303-16-06SS
TI-A303-16-08SS
TI-A303-16-12SS
TI-A303-20-12SS
TI-A303-20-16SS
TI-A303-24-12SS
TI-A303-24-20SS
-
male
thread
size
[inch]
1/8
1/8
1/8
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
1
1
1
1
1
1.1/4
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
2
2
2
female
thread
size
[inch]
1/8
1/4
3/8
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
3/4
1
1/4
3/8
1/2
3/4
1.1/4
1/4
3/8
1/2
3/4
1.1/4
1/2
3/4
1
1.1/2
3/4
1
1.1/4
1
1.1/4
1.1/2
code
(carbon steel)
code
(stainless steel)
thread
size
[inch]
thread
size
[inch]
TI-A301-02-02
TI-A301-02-04
TI-A301-02-06
TI-A301-04-04
TI-A301-04-06
TI-A301-04-08
TI-A301-04-12
TI-A301-06-06
TI-A301-06-08
TI-A301-06-12
TI-A301-08-08
TI-A301-08-12
TI-A301-08-16
TI-A301-12-12
TI-A301-12-16
TI-A301-16-16
TI-A301-16-20
TI-A301-16-24
TI-A301-20-20
TI-A301-20-24
TI-A301-24-24
TI-A301-24-32
TI-A301-32-32
TI-A301-02-02SS
TI-A301-02-04SS
TI-A301-02-06SS
TI-A301-04-04SS
TI-A301-04-06SS
TI-A301-04-08SS
TI-A301-06-06SS
TI-A301-06-08SS
TI-A301-08-08SS
TI-A301-08-12SS
TI-A301-08-16SS
TI-A301-12-12SS
TI-A301-12-16SS
TI-A301-16-16SS
TI-A301-20-20SS
TI-A301-24-24SS
TI-A301-32-32SS
1/8
1/8
1/8
1/4
1/4
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
3/4
3/4
1
1
1
1.1/4
1.1/4
1.1/2
1.1/2
2
1/8
1/4
3/8
1/4
3/8
1/2
3/4
3/8
1/2
3/4
1/2
3/4
1
3/4
1
1
1.1/4
1.1/2
1.1/4
1.1/2
1.1/2
2
2
2 x NPT female thread
A302
code
(carbon steel)
code
(stainless steel)
thread
size
[inch]
thread
size
[inch]
TI-A302-02-02
TI-A302-02-04
TI-A302-02-06
TI-A302-04-04
TI-A302-04-06
TI-A302-04-08
TI-A302-04-12
TI-A302-06-06
TI-A302-06-08
TI-A302-08-08
TI-A302-08-12
TI-A302-12-12
TI-A302-12-16
TI-A302-16-16
TI-A302-20-20
TI-A302-24-24
TI-A302-32-32
TI-A302-02-02SS
TI-A302-04-04SS
TI-A302-06-06SS
TI-A302-08-08SS
TI-A302-12-12SS
TI-A302-16-16SS
TI-A302-20-20SS
TI-A302-24-24SS
TI-A302-32-32SS
1/8
1/8
1/8
1/4
1/4
1/4
1/4
3/8
3/8
1/2
1/2
3/4
3/4
1
1.1/4
1.1/2
2
1/8
1/4
3/8
1/4
3/8
1/2
3/4
3/8
1/2
1/2
3/4
3/4
1
1
1.1/4
1.1/2
2
753

NPT adaptors
2 x NPT male thread
A304
A305
code
(carbon steel)
code
(stainless steel)
thread size
[inch]
code
(carbon steel)
code
(stainless steel)
thread size
[inch]
TI-A304-02-02
TI-A304-04-04
TI-A304-06-06
TI-A304-08-08
TI-A304-12-12
TI-A304-16-16
TI-A304-20-20
TI-A304-24-24
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
TI-A305-02-02
TI-A305-04-04
TI-A305-04-06
TI-A305-06-06
TI-A305-08-08
TI-A305-12-12
TI-A305-16-16
TI-A305-20-20
TI-A305-24-24
TI-A305-32-32
TI-A305-02-02SS
TI-A305-04-04SS
TI-A305-06-06SS
TI-A305-08-08SS
-
1/8
1/4
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
A306
A307
code
(carbon steel)
code
(stainless steel)
thread size
[inch]
code
(carbon steel)
code
(stainless steel)
thread size
[inch]
TI-A306-02-02
TI-A306-04-04
TI-A306-06-06
TI-A306-08-08
TI-A306-12-12
TI-A306-16-16
TI-A306-20-20
TI-A306-24-24
TI-A306-32-32
TI-A306-02-02SS
TI-A306-06-06SS
TI-A306-08-08SS
TI-A306-12-12SS
-
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
TI-A307-02-02
TI-A307-04-02
TI-A307-04-04
TI-A307-06-06
TI-A307-08-08
TI-A307-12-12
TI-A307-16-16
TI-A307-20-20
TI-A307-24-24
TI-A307-32-32
1/8
1/4
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
754

NPT adaptors
3 x NPT male thread
A308
code
(carbon steel)
TI-A308-02
TI-A308-04
TI-A308-06
TI-A308-08
TI-A308-12
TI-A308-16
code
(stainless steel)
TI-A308-02SS
TI-A308-04SS
TI-A308-06SS
TI-A308-08SS
TI-A308-12SS
-
thread size
[inch]
1/8
1/4
3/8
1/2
3/4
1
A309
code
(carbon steel)
TI-A309-02
TI-A309-04
TI-A309-06
TI-A309-08
TI-A309-12
TI-A309-16
TI-A309-20
TI-A309-24
TI-A309-32
code
(stainless steel)
TI-A309-02SS
TI-A309-04SS
TI-A309-06SS
TI-A309-08SS
-
A310
code
(carbon steel)
TI-A310-02
TI-A310-04
TI-A310-06
TI-A310-08
TI-A310-12
TI-A310-16
TI-A310-20
TI-A310-24
TI-A310-32
code
(stainless steel)
-
thread size
[inch]
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
A311
code
(carbon steel)
TI-A311-02
TI-A311-04
TI-A311-06
TI-A311-08
TI-A311-12
TI-A311-16
TI-A311-20
TI-A311-24
TI-A311-32
code
(stainless steel)
-
code
(stainless steel)
-
thread size
[inch]
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
NPT male thread
A312
code
(carbon steel)
TI-A312-02
TI-A312-04
TI-A312-06
TI-A312-08
TI-A312-12
TI-A312-16
TI-A312-20
TI-A312-24
thread size
[inch]
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
thread size
[inch]
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
A313
code
(carbon steel)
TI-A313-02
TI-A313-04
TI-A313-06
TI-A313-08
TI-A313-12
TI-A313-16
TI-A313-20
TI-A313-24
TI-A313-32
code
(stainless steel)
TI-A313-02SS
TI-A313-04SS
TI-A313-06SS
TI-A313-08SS
TI-A313-12SS
TI-A313-16SS
TI-A313-20SS
TI-A313-24SS
TI-A313-32SS
thread size
[inch]
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
755

SAE flange connectors
Material:
Zinc-plated steel (standard), AISI 316L steel (option)
Working temp.: From -20C up to +100C (NBR seal), from -20C up to +200C (Viton seal)
Compact SAE flange connectors, available in two types - threaded (metric or imperial BSP) or butt weld. Equipped
with a set of bolts and O-ring seal (not applicable to counterflanges).
Examples of flange connections
flange
connector
flange
connector
counterflange
flange
connector
flange
body
connector plate
blanking
flange
cover plate
flange
connector plate
body
Basic dimensions of SAE flange
SAE 3000
SAE 6000
flange
dimension
[inch]
dimension
I
[mm]
dimension
H
[mm]
bolt hole
diam. C
[mm]
bolt
size
[mm]
flange
dimension
[inch]
dimension
I
[mm]
dimension
H
[mm]
1/2
38,1
17,5
M8
1/2
40,5
18,2
M8
3/4
47,6
22,3
3/4
50,8
23,8
11
M10
52,4
26,2
1.1/4
58,7
30,2
1.1/2
69,9
35,7
77,8
42,9
2.1/2
88,9
11
bolt
size
[mm]
57,2
27,8
13
M12
1.1/4
66,6
31,8
15
M14
1.1/2
79,3
36,5
17
M16
96,8
44,5
21
M20
50,8
2.1/2
123,8
58,7
25
M24
106,4
61,9
152,4
71,4
32
M30
3.1/2
120,7
69,9
130,2
77,8
152,4
92,1
756
M10
bolt hole
diam. C
[mm]
11,5
13,5
17
M12
M16

SAE flange connector 3000 / DIN 2353
press.
[bar]
code
flange
dimension
[inch]
HK-C3-M-08-12S
HK-C3-M-08-15L
1/2
HK-C3-M-08-16S
HK-C3-M-12-16S
348
HK-C3-M-12-20S
3/4
HK-C3-M-12-22L
HK-C3-M-16-20S
HK-C3-M-16-25S
HK-C3-M-16-28L
HK-C3-M-20-25S
278
HK-C3-M-20-30S
1.1/4
HK-C3-M-20-35L
HK-C3-M-24-35L
HK-C3-M-24-38S
210
1.1/2
HK-C3-M-24-42L
HK-C3-M-32-38S
HK-C3-M-32-42L
SAE flange connector 6000 / DIN 2353
bolt
size
[mm]
12
thread
size
[mm]
20x1,5
15
22x1,5
4xM8
16
24x1,5
HK-C6-M-08-16S
pipe O.D.
[mm]
code
flange
dimension
[inch]
HK-C3-M-90-08-12S
HK-C3-M-90-08-15L
1/2
HK-C3-M-90-08-16S
HK-C3-M-90-12-16S
348
HK-C3-M-90-12-20S
3/4
HK-C3-M-90-12-22L
HK-C3-M-90-16-20S
HK-C3-M-90-16-25S
HK-C3-M-90-16-28L
HK-C3-M-90-20-25S
278
HK-C3-M-90-20-30S
1.1/4
HK-C3-M-90-20-35L
HK-C3-M-90-24-35L
210
HK-C3-M-90-24-38S
HK-C3-M-90-24-42L
1.1/2
code
HK-C6-M-08-14S
16
24x1,5
HK-C6-M-12-16S
20
30x2
HK-C6-M-12-20S
22
30x2
HK-C6-M-12-22L
20
30x2
25
36x2
28
36x2
HK-C6-M-16-28L
25
36x2
HK-C6-M-20-25S
30
42x2
HK-C6-M-20-30S
35
45x2
HK-C6-M-20-35L
1/2
3/4
HK-C6-M-16-20S
4xM10
420
HK-C6-M-16-25S
35
45x2
HK-C6-M-24-30S
38
52x2
HK-C6-M-24-38S
42
52x2
38
52x2
42
52x2
4xM12
1.1/4
1.1/2
HK-C6-M-24-42L
bolt
size
[mm]
12
thread
size
[mm]
20x1,5
14
22x1,5
4xM8
16
24x1,5
16
24x1,5
20
30x2
22
30x2
20
30x2
25
36x2
28
36x2
pipe O.D.
[mm]
25
36x2
30
42x2
35
45x2
30
45x2
38
52x2
42
52x2
4xM10
4xM12
4xM14
4xM16
SAE 6000 90 flange connector / DIN 2353
bolt
size
[mm]
12
thread
size
[mm]
20x1,5
15
22x1,5
4xM8
16
24x1,5
HK-C6-M-90-08-16S
16
24x1,5
HK-C6-M-90-12-16S
20
30x2
HK-C6-M-90-12-20S
22
30x2
HK-C6-M-90-12-22L
20
30x2
25
36x2
28
36x2
HK-C6-M-90-16-28L
25
36x2
HK-C6-M-90-20-25S
30
42x2
HK-C6-M-90-20-30S
35
45x2
HK-C6-M-90-20-35L
35
45x2
38
52x2
42
52x2
pipe O.D.
[mm]
flange
dimension
[inch]
HK-C6-M-08-12S
SAE 3000 90 flange connector / DIN 2353
press.
[bar]
press.
[bar]
press.
[bar]
code
flange
dimension
[inch]
HK-C6-M-90-08-12S
HK-C6-M-90-08-14S
1/2
3/4
HK-C6-M-90-16-20S
4xM10
420
HK-C6-M-90-16-25S
1.1/4
HK-C6-M-90-24-30S
4xM12
HK-C6-M-90-24-38S
HK-C6-M-90-24-42L
1.1/2
bolt
size
[mm]
12
thread
size
[mm]
20x1,5
14
22x1,5
4xM8
16
24x1,5
16
24x1,5
20
30x2
22
30x2
20
30x2
25
36x2
28
36x2
25
36x2
30
42x2
35
45x2
30
42x2
38
52x2
42
52x2
pipe O.D.
[mm]
4xM10
4xM12
4xM14
4xM16
757

SAE 3000 flange connector / BSP male thread 60
press.
[bar]
code
flange
dimension
[inch]
thread
size
[inch]
3/8
bolt
size
[mm]
1/2
1/2
4xM8
HK-C3-B-08-06
HK-C3-B-08-08
HK-C3-B-08-12
HK-C3-B-12-08
348
HK-C3-B-12-12
3/4
HK-C3-B-12-16
HK-C3-B-16-12
HK-C3-B-16-16
HK-C3-B-16-20
HK-C3-B-20-16
278
HK-C3-B-20-20
1.1/4
HK-C3-B-20-24
HK-C3-B-24-20
HK-C3-B-24-24
210
1.1/2
1/2
HK-C6-B-12-08
3/4
HK-C6-B-12-12
HK-C6-B-12-16
4xM10
HK-C6-B-20-16
HK-C6-B-20-20
1.1/2
HK-C6-B-20-24
1.1,4
HK-C6-B-24-20
1.1/2
HK-C6-B-24-24
HK-C3-B-90-08-08
bolt
size
[mm]
1/2
1/2
4xM8
HK-C3-B-90-12-08
348
HK-C3-B-90-12-12
3/4
HK-C3-B-90-12-16
HK-C3-B-90-16-12
HK-C3-B-90-16-16
HK-C3-B-90-16-20
HK-C3-B-90-20-16
278
HK-C3-B-90-20-20
1.1/4
HK-C3-B-90-20-24
210
758
HK-C3-B-90-24-20
HK-C3-B-90-24-24
1.1/2
1/2
1/2
4xM8
3/4
1/2
3/4
3/4
4xM10
1
3/4
1
4xM12
1.1/4
1
1.1/4
1.1/4
4xM14
1.1/2
1.1/2
1.1/4
1.1/2
4xM16
SAE 6000 90 flange connector / BSP male thread 60
press.
[bar]
code
HK-C6-B-90-08-08
3/4
HK-C6-B-90-08-12
1/2
HK-C6-B-90-12-08
3/4
HK-C6-B-90-12-12
HK-C6-B-90-12-16
4xM10
420
HK-C6-B-90-16-16
HK-C6-B-90-16-20
HK-C6-B-90-20-16
1.1/4
HK-C6-B-90-20-20
1.1/2
HK-C6-B-90-20-24
1.1/2
thread
size
[inch]
3/8
bolt
size
[mm]
1/2
1/2
4xM8
4xM12
3/4
1/2
3/4
HK-C6-B-90-24-20
HK-C6-B-90-24-24
3/4
4xM10
HK-C6-B-90-16-12
1.1/4
1.1,4
flange
dimension
[inch]
HK-C6-B-90-08-06
3/4
1
bolt
size
[mm]
thread
size
[inch]
3/8
HK-C3-B-90-08-12
thread
size
[inch]
3/8
4xM12
flange
dimension
[inch]
HK-C3-B-90-08-06
HK-C6-B-16-16
1.1/4
flange
dimension
[inch]
HK-C6-B-16-12
HK-C6-B-16-20
1.1/2
code
420
1.1/4
SAE 3000 90 flange connector / BSP male thread 60
press.
[bar]
HK-C6-B-08-08
HK-C6-B-08-12
HK-C3-B-32-24
code
3/4
HK-C3-B-24-32
HK-C3-B-32-32
press.
[bar]
HK-C6-B-08-06
3/4
1
SAE 6000 flange connector / BSP male thread 60
3/4
1
4xM12
1.1/4
1
1.1/4
1.1/4
4xM14
1.1/2
1.1/2
1.1/4
1.1/2
4xM16

SAE 3000 flange connector / BSP female thread
press.
[bar]
code
HK-D3-B-08-06
348
HK-D3-B-08-08
flange
dimension
[inch]
1/2
thread
size
[inch]
3/8
1/2
HK-D3-B-12-12
3/4
3/4
HK-D3-B-16-16
HK-D3-B-20-20
1.1/4
1.1/4
HK-D3-B-24-24
1.1/2
1.1/2
HK-D3-B-32-32
175
HK-D3-B-40-40
2.1/2
138
HK-D3-B-48-48
HK-D3-B-56-56
3.1/2
3.1/2
HK-D3-B-64-64
HK-D3-B-80-80
278
210
35
SAE 6000 flange connector / BSP female thread
bolt
size
[mm]
348
278
210
175
HK-D6-B-08-08
flange
dimension
[inch]
1/2
thread
size
[inch]
3/8
1/2
bolt
size
[mm]
4xM8
HK-D6-B-12-12
3/4
3/4
4xM10
HK-D6-B-16-16
4xM12
HK-D6-B-20-20
1.1/4
1.1/4
4xM14
HK-D6-B-24-24
1.1/2
1.1/2
4xM16
HK-D6-B-32-32
4XM20
2.1/2
HK-D6-B-40-40
2.1/2
2.1/2
4xM24
HK-D6-B-48-48
4xM30
HK-D3-B-90-08-08
flange
dimension
[inch]
1/2
thread
size
[inch]
1/2
HK-D3-B-90-12-12
3/4
3/4
HK-D3-B-90-16-16
HK-D3-B-90-20-20
1.1/4
1.1/4
HK-D3-B-90-24-24
1.1/2
1.1/2
HK-D3-B-90-32-32
HK-D3-B-90-40-40
2.1/2
2.1/2
code
code
HK-D6-B-08-06
4xM8
4xM10
420
4xM12
4xM16
SAE 3000 90 flange connector / BSP female thread
press.
[bar]
press.
[bar]
bolt
size
[mm]
4xM8
4xM10
4xM12
SAE 6000 90 flange connector / BSP female thread
press.
[bar]
420
HK-D6-B-90-08-08
flange
dimension
[inch]
1/2
thread
size
[inch]
1/2
bolt
size
[mm]
4xM8
HK-D6-B-90-12-12
3/4
3/4
4xM10
HK-D6-B-90-16-16
4xM12
HK-D6-B-90-20-20
1.1/4
1.1/4
4xM14
HK-D6-B-90-24-24
1.1/2
1.1/2
4xM16
HK-D6-B-90-32-32
4xM20
code
759

SAE 3000 flange with butt weld connection
press.
[bar]
code
HK-D3-SA-06-17
flange dimension dimension

dimension
A
B
[inch]
[mm]
[mm]
3/8
17,5
13
HK-D3-SA-08-21
1/2
21,6
13
HK-D3-SA-12-27
3/4
27,2
19
HK-D3-SA-16-34
34,1
25
HK-D3-SA-20-42
1.1/4
42,8
31
HK-D3-SA-24-48
1.1/2
48,6
38
HK-D3-SA-32-61
61
50
175
HK-D3-SA-40-76
2.1/2
76,6
138
HK-D3-SA-48-90
90,5
HK-D3-SA-56-103
3.1/2
103
89
HK-D3-SA-64-115
115,3
99
HK-D3-SA-80-142
142
120
348
278
210
35
bolt
size
[mm]
code
HK-D3-SB-06-17
13
HK-D6-SA-12-27
3/4
27,2
19
4xM10
HK-D6-SA-16-34
34,5
25
4xM12
HK-D6-SA-20-42
1.1/4
42,8
31
4xM14
HK-D6-SA-24-48
1.1/2
48,6
38
4xM16
HK-D6-SA-32-61
61
50
4xM20
63
HK-D6-SA-40-76
2.1/2
76,6
63
4xM24
73
HK-D6-SA-48-90
90,5
75
4xM30

dimension
A
B
[inch]
[mm]
[mm]
3/8
17,5
10
13
HK-D3-SB-12-27
3/4
27,2
19
HK-D3-SB-16-34
34,5
25
HK-D3-SB-20-42
1.1/4
42,8
31
HK-D3-SB-24-48
1.1/2
48,6
38
HK-D3-SB-32-61
61
50
175
HK-D3-SB-40-76
2.1/2
76,6
138
HK-D3-SB-48-89
89
HK-D3-SB-56-103
3.1/2
103
89
HK-D3-SB-64-115
115
99
HK-D3-SB-80-142
142
120
35
760
4xM8
21,6
21,6
210
bolt
size
[mm]
1/2
1/2
278

dimension
A
B
[inch]
[mm]
[mm]
3/8
17,5
13
HK-D6-SA-08-21
HK-D3-SB-08-21
348
code
HK-D6-SA-06-17
4xM8
4xM10
420
4xM12
4xM16
press.
[bar]
press.
[bar]
bolt
size
[mm]
press.
[bar]
code
HK-D6-SB-06-17
4xM8

dimension
A
B
[inch]
[mm]
[mm]
3/8
17,5
10
bolt
size
[mm]
4xM8
HK-D6-SB-08-21
1/2
21,6
13
HK-D6-SB-12-27
3/4
27,2
18
4xM10
HK-D6-SB-16-34
34,5
22
4xM12
HK-D6-SB-20-42
1.1/4
42,8
28
4xM14
HK-D6-SB-24-48
1.1/2
48,6
32
4xM16
HK-D6-SB-32-61
61
41
4xM20
63
HK-D6-SB-40-76
2.1/2
76,6
50
4xM24
73
HK-D6-SB-48-90
90
58
4xM30
4xM10
420
4xM12
4xM16

SAE 3000 90 flange with butt weld connection
press.
[bar]
348
278
210
175

dimension
A
B
[inch]
[mm]
[mm]
HK-D3-SA-90-08-21
1/2
21,6
13
code
HK-D3-SA-90-12-27
3/4
27,2
19
HK-D3-SA-90-16-34
34,1
25
HK-D3-SA-90-20-42
1 1/4
42,8
31
HK-D3-SA-90-24-48
1 1/2
48,6
38
HK-D3-SA-90-32-61
61
50
HK-D3-SA-90-40-76
2 1/2
76,6
60
bolt
size
[mm]
4xM8
4xM10
code
HK-E3-SA-08-17
HK-E3-SA-08-21
348
HK-E3-SA-12-21
HK-E3-SA-12-27
HK-E3-SA-16-27
HK-E3-SA-16-34
278
HK-E3-SA-20-34
HK-E3-SA-20-42
HK-E3-SA-24-42
210
HK-E3-SA-24-48
HK-E3-SA-32-48
HK-E3-SA-32-61
175
138
HK-E3-SA-40-61
HK-E3-SA-40-76
HK-E3-SA-48-76
HK-E3-SA-48-90
HK-E3-SA-56-90
HK-E3-SA-56-103
35
HK-E3-SA-64-103
HK-E3-SA-64-115
HK-E3-SA-72-115
HK-E3-SA-72-142

dimension
A
B
[inch]
[mm]
[mm]
17,5
1/2
21,6
13
3/4
1
1 1/4
1 1/2
2
2 1/2
3
3 1/2
4
5
420
4xM12
press.
[bar]
press.
[bar]

dimension
A
B
[inch]
[mm]
[mm]
HK-D6-SA-90-08-21
1/2
21,6
13
bolt
size
[mm]
4xM8
HK-D6-SA-90-12-27
3/4
27,2
19
4xM10
HK-D6-SA-90-16-34
34,1
25
4xM12
HK-D6-SA-90-20-42
1 1/4
42,8
31
4xM14
HK-D6-SA-90-24-48
1 1/2
48,6
38
4xM16
HK-D6-SA-90-32-61
61
50
4xM20
code
bolt
size
[mm]
press.
[bar]
code
HK-E6-SA-08-17
4xM8
HK-E6-SA-08-21
21,6
HK-E6-SA-12-21
27,2
HK-E6-SA-12-27
27,2
34,5
34,5
42,8
42,8
48,6
48,6
61
61
76,6
76,6
90,5
90,5
103
103
115,5
115,5
142,5
19
HK-E6-SA-16-27
4xM10
25
420
HK-E6-SA-16-34
HK-E6-SA-20-34
HK-E6-SA-20-42
31
HK-E6-SA-24-42
HK-E6-SA-24-48
38
4xM12
50
HK-E6-SA-32-48
HK-E6-SA-32-61

dimension
A
B
[inch]
[mm]
[mm]
17,5
1/2
21,6
13
3/4
1
1 1/4
1 1/2
2
21,6
27,2
27,2
34,5
34,5
42,8
42,8
48,6
48,6
61
bolt
size
[mm]
4xM8
4xM10
19
4xM12
25
4xM14
31
4xM16
38
50
4xM20
63
73
89
4xM16
99
120
761

SAE 3000 counterflange / BSP female thread
press.
[bar]
code
flange
dimension
[inch]
HK-D3-BX-08-06
348
278
210
1/2
HK-D3-BX-08-08
thread
size
[inch]
3/8
SAE 6000 counterflange / BSP female thread
bolt hole
thread
[mm]
3/4
3/4
HK-D3-BX-16-16
HK-D3-BX-20-20
1.1/4
1.1/4
HK-D3-BX-24-24
1.1/2
1.1/2
HK-D3-BX-32-32
code
flange
dimension
[inch]
HK-D6-BX-08-06
M8
1/2
HK-D3-BX-12-12
press.
[bar]
1/2
HK-D6-BX-08-08
M10
420
M12
thread
size
[inch]
3/8
1/2
bolt hole
thread
[mm]
M8
HK-D6-BX-12-12
3/4
3/4
M10
HK-D6-BX-16-16
M12
HK-D6-BX-20-20
1.1/4
1.1/4
M14
HK-D6-BX-24-24
1.1/2
1.1/2
M16
HK-D6-BX-32-32
M20
175
HK-D3-BX-40-40
2.1/2
2.1/2
HK-D6-BX-40-40
2.1/2
2.1/2
M24
138
HK-D3-BX-48-48
HK-D6-BX-48-48
M30
HK-D3-BX-56-56
3.1/2
3.1/2
35
HK-D3-BX-64-64
HK-D3-BX-80-80
M16
SAE 3000 counterflange with butt weld connection
press.
[bar]
code
HK-D3-SAX-06
348
HK-D3-SAX-08
flange dimension dimension bolt hole

dimension
A
B
thread
[inch]
[mm]
[mm]
[mm]
3/8
17,5
13
M8
1/2
21,6
13
HK-D3-SAX-12
3/4
27,2
19
HK-D3-SAX-16
34,1
25
HK-D3-SAX-20
1.1/4
42,8
31
HK-D3-SAX-24
1.1/2
48,6
38
HK-D3-SAX-32
61
50
175
HK-D3-SAX-40
2.1/2
76,6
138
HK-D3-SAX-48
90,5
HK-D3-SAX-56
3.1/2
103
89
HK-D3-SAX-64
115,3
99
HK-D3-SAX-80
142
120
278
210
35
762
press.
[bar]
code
HK-D6-SAX-06
HK-D6-SAX-08

dimension
A
B
thread
[inch]
[mm]
[mm]
[mm]
3/8
17,5
13
M8
1/2
21,6
13
HK-D6-SAX-12
3/4
27,2
19
M10
HK-D6-SAX-16
34,1
25
M12
HK-D6-SAX-20
1.1/4
42,8
31
M14
HK-D6-SAX-24
1.1/2
48,6
38
M16
HK-D6-SAX-32
61
50
M20
63
HK-D6-SAX-40
2.1/2
76,6
63
M24
73
HK-D6-SAX-48
90,5
73
M30
M10
420
M12
M16

press.
[bar]
code
HK-D3-SBX-06
348
HK-D3-SBX-08

dimension
A
B
thread
[inch]
[mm]
[mm]
[mm]
3/8
17,5
10
M8
1/2
21,6
13
HK-D3-SBX-12
3/4
27,2
19
HK-D3-SBX-16
34,1
25
HK-D3-SBX-20
1.1/4
42,8
31
HK-D3-SBX-24
1.1/2
48,6
38
HK-D3-SBX-32
61
50
175
HK-D3-SBX-40
2.1/2
76,6
138
HK-D3-SBX-48
HK-D3-SBX-56
278
210
35
press.
[bar]
code
HK-D6-SBX-06
HK-D6-SBX-08

dimension
A
B
thread
[inch]
[mm]
[mm]
[mm]
3/8
17,5
10
M8
1/2
21,6
13
HK-D6-SBX-12
3/4
27,2
18
M10
HK-D6-SBX-16
34,1
22
M12
HK-D6-SBX-20
1.1/4
42,8
28
M14
HK-D6-SBX-24
1.1/2
48,6
32
M16
HK-D6-SBX-32
61
41
M20
63
HK-D6-SBX-40
2.1/2
76,6
50
M24
90,5
73
HK-D6-SBX-48
90,5
58
M30
3.1/2
103
89
HK-D3-SBX-64
115
99
HK-D3-SBX-80
142
120
HK-E6-06
flange
dimension
[inch]
3/8
cut-out
diameter
[mm]
13
bolt
size
[mm]
4xM8
HK-E6-12
3/4
20
4xM10
HK-E6-16
25
4xM12
HK-E6-20
1.1/4
25
4xM14
HK-E6-24
1.1/2
34
4xM16
HK-E6-32
46
4XM20
M10
420
M12
M16
SAE 3000 blanking flange
SAE 6000 blanking flange
HK-E3-08
flange
dimension
[inch]
1/2
cut-out
diameter
[mm]
13
HK-E3-12
3/4
16
HK-E3-16
25
HK-E3-20
1.1/4
25
HK-E3-24
1.1/2
34
HK-E3-32
43
175
HK-E3-40
2.1/2
61
HK-E6-40
2.1/2
56
4xM24
138
HK-E3-48
60
HK-E6-48
71
4xM30
HK-E3-56
3.1/2
73
HK-E3-64
87
HK-E3-80
127
press.
[bar]
348
278
210
35
code
bolt
size
[mm]
4xM8
press.
[bar]
4xM10
420
4xM12
code
4xM16
763

SAE 3000 cover plate
SAE 6000 cover plate
HK-G3-08
flange
dimension
[inch]
1/2
HK-G6-08
flange
dimension
[inch]
1/2
HK-G3-12
3/4
HK-G3-16
HK-G6-12
3/4
11
HK-G6-16
13
HK-G3-20
1.1/4
HK-G3-24
1.1/2
HK-G6-20
1.1/4
HK-G6-24
1.1/2
HK-G3-32
HK-G6-32
HK-G3-40
21
2.1/2
HK-G6-40
2.1/2
25
HK-G3-48
HK-G6-48
32
HK-G3-56
3.1/2
HK-G3-64
HK-G3-80
code
thickness
G
[mm]
bolt hole
diam. C
[mm]
9
11
11,5
13,5
code
thickness
G
[mm]
bolt hole
diam. C
[mm]
9
15
17
17
SAE 3000 flange connector plate
SAE 6000 flange connector plate
HK-H3-08
flange
dimension
[inch]
1/2
opening
diam. D
[mm]
13
HK-H3-12
3/4
19
HK-H3-16
25
HK-H3-20
1.1/4
32
HK-H3-24
1.1/2
38
HK-H3-32
51
HK-H6-32
51
21
HK-H3-40
2.1/2
63
HK-H6-40
2.1/2
63
25
HK-H6-48
73
32
code
HK-H3-48
73
HK-H3-56
3.1/2
89
HK-H3-64
99
HK-H3-80
120
764
thickness
G
[mm]
bolt hole
diam. C
[mm]
9
11
11,5
13,5
17
HK-H6-08
flange
dimension
[inch]
1/2
opening
diam. D
[mm]
13
HK-H6-12
3/4
17
11
HK-H6-16
24
13
code
HK-H6-20
1.1/4
31
HK-H6-24
1.1/2
38
thickness
G
[mm]
bolt hole
diam. C
[mm]
9
15
17
HIGH PRESSURE - precision pipes

HPZ, HPC type
Cold drawn seamless precision pipes made of toughened
steel.
Material: Steel grade E235+N according to EN 10305-4
standard.
Steel grade 37.4 NBK according to DIN 1630
(TDC - DIN 2391).
Zinc-plated coating, chromium (VI) free
Length: 6 meters (available in lengths of 2 or 3 meters)
code
(black pipe)
code
(zinc-plated pipe)
O.D.
[mm]
wall
thickness
[mm]
I.D.
[mm]
weight
[kg/m]
HR-HPZ1-06/1,0
HR-HPZ1-08/1,5
HR-HPZ1-10/1,0
HR-HPZ1-10/1,5
HR-HPZ1-10/2,0
HR-HPZ1-12/1,5
HR-HPZ1-12/2,0
HR-HPZ1-14/2,0
HR-HPZ1-15/1,5
HR-HPZ1-15/2,0
HR-HPZ1-16/2,0
HR-HPZ1-18/2,0
HR-HPZ1-20/3,0
HR-HPZ1-22/2,0
HR-HPZ1-25/2,0
HR-HPZ1-25/3,0
HR-HPZ1-28/2,0
HR-HPZ1-30/3,0
HR-HPZ1-35/3,0
HR-HPZ1-38/4,0
HR-HPZ1-42/4,0
HR-HPC1-06/1,0
HR-HPC1-08/1,5
HR-HPC1-10/1,0
HR-HPC1-10/1,5
HR-HPC1-12/1,5
HR-HPC1-12/2,0
HR-HPC1-15/1,5
HR-HPC1-15/2,0
HR-HPC1-16/2,0
HR-HPC1-18/2,0
HR-HPC1-22/2,0
HR-HPC1-25/3,0
HR-HPC1-28/2,0
HR-HPC1-30/3,0
HR-HPC1-35/3,0
-
6
8
10
10
10
12
12
14
15
15
16
18
20
22
25
25
28
30
35
38
42
1
1,5
1
1,5
2
1,5
2
2
1,5
2
2
2
3
2
2
3
2
3
3
4
4
4
5
8
7
6
9
8
10
12
11
12
14
14
18
21
19
24
24
29
30
34
0,123
0,240
0,222
0,314
0,395
0,389
0,493
0,592
0,499
0,641
0,691
0,789
1,260
0,986
1,130
1,630
1,280
2,000
2,370
3,350
3,750
theoretical press. [bar]

DIN2413
DIN2413
l
llI
static
dynamic
389
374
431
414
282
249
373
358
478
460
353
305
409
393
403
343
282
249
376
323
353
305
313
274
373
358
256
228
226
202
338
294
201
182
282
249
242
216
297
261
269
238
bursting
pressure
[bar]
1680
1860
870
1380
2100
1150
1580
1340
980
1250
1170
1040
1450
850
670
1050
620
920
720
970
850
Theoretical pressure according to DIN 2413-93.

Technical Delivery Conditions (TDC):
- pipes are annealed under controlled atmosphere (normalised NBK (+N)),
- surface protection: phosphate coating (black pipes) and light oil,
- smooth edges (free from burr), blinded, 6-meter lengths.
Dimensions and tolerances of pipes with Technical Delivery Conditions (TDC):
DIN 1630
Seamless circular pipe of non-alloy steel with very high quality requirements.
DIN 2391
Seamless circular pipe of non-alloy steel with strict dimensional tolerance.
EN0305-4
Cold drawn seamless circular pipe of non-alloy steel for hydraulic and pneumatic

high pressure applications.
Note! For pipe bending and processing tools - see chapter MACHINES AND ACCESSORIES.
765
HIGH PRESSURE - DIN 2353 connectors

Characteristics and applications
Threaded (pipe) fittings with 24 cone sealing and cutting ring are widely used in many branches of industry to
connect steel and non-ferrous metal pipes with outside diameter from 4 to 42 mm. Fittings according to DIN 2353
can also be used to connect flexible hose assemblies (as a body without nut and cutting ring). Manufactured according to ISO 8437-1 or DIN 2353. Used in hydraulic and pneumatic drive and control systems as well as general
industrial applications.
Operation principle of fittings with a cutting ring
A complete connection of a pipe with a hydraulic installation requires: a fitting (1), a cutting ring (2), a nut (3) and
a hydraulic precision pipe (4). During assembly, sharp edges of the ring (5 and 6) bite into the pipe according to
the 24 cone (7) and creating a shoulder (9). The pipe, cut straight at 90 angle, must be pushed firmly against
the bottom of the seat (10). Otherwise, the cutting ring does not bite into the pipe deep enough to create a tight
connection
9
2
1
10
Before assembly
After assembly
The fittings manufactured according to DIN 2353, depending on their usage and pressure, can be divided into the
following categories:
- LL (extra light series) - used in small hydraulic and cooling devices, for plastic hoses, compressed air, propane,
etc.
- L (light series) - used for standard applications within the working pressure of that range.
- S (heavy series) - used for higher pressure, hydraulic high pressure applications such as: hammering, shipbuilding, mining, chemical industry, heavy equipment.
To identify DIN2353 fitting, a seat D (that defines pipe outside diameter), and thread size M (metric thread is a
standard) must be measured. The table below presents all information needed for quick and easy identification of
the range and module number used in a code number at TUBES INTERNATIONAL. For example: fitting with D =
10 mm and thread size M16x1.5 corresponds to a light range and 10L module.
picture
766
pipe D
[mm]
thread size M
[mm]
4
6
8
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
M8x1
M10x1
M12x1
M12x1,5
M14x1,5
M16x1,5
M18x1.5
M22x1.5
M26x1,5
M30x2
M36x2
M45x2
M52x2
M14x1,5
M16x1,5
M18x1.5
M20x1,5
M22x1.5
M24x1,5
M30x2
M36x2
M42x2
M52x2
series
LL
(extra light)
L
(light)
S
(heavy)
module
4LL
6LL
8LL
6L
8L
10L
12L
15L
18L
22L
28L
35L
42L
6S
8S
10S
12S
14S
16S
20S
25S
30S
38S

Basic information
Material
DIN 2353 pipe fittings are supplied in two material versions:
- carbon steel (zinc-plated or phosphate-coated) - HD code group, standard seal: NBR rubber,
- stainless steel (AISI 316) HS code group, standard seal: Viton.
Working temperature
Allowable working temp. depends on the material of a connector and seal:
-
-
-
-
carbon steel:
carbon steel + NBR:
stainless steel:
stainless steel + Viton:

Working Pressure
The max. working pressure (nominal pressure) of DIN 2353 pipe fittings differs according to the type (light series,
heavy series), size (pipe outside diameter), material and manufacturer. In the table below, data from different producers showing different types of fittings, made of carbon and stainless steel, is collected. It facilitates preliminary
selection. If the required working pressure exceeds the value in the table, please contact TUBES INTERNATIONAL
Technical Department.
series
LL
L
pipe O.D.
[mm]
48
6 15
18 22
28 42
6 12 (14)
16 25
30 38
maximum working pressure [bar]

for complete fitting
for connection with
according to different producers
cutting ring according
to PN-ISO 8434-1
minimum
maximum
100
250
160
100
630
400
250
160
100
100
400
250
250
400
315
250
630
400
315
Nominal pressure (max working pressure) given by manufacturers is calculated within static working conditions,
the safety factor of 4 for the cutting ring connection. For fittings with metal to metal seal and BANJO fittings, the
safety factor varies from 1.5 to 2.5. When choosing a fitting, dynamic pressure load and vibrations in the installation should be also considered.
For temperatures above +100C, the max. working pressure may require reduction (contact TUBES INTERNATIONAL Technical Department).
Medium
Pipe fittings according to DIN 2353 can be used to transfer a wide range of fluids and gases. However, the compatibility of the medium with fitting material and seal type must be always checked. For all applications different from
standard hydraulic oils, please contact TUBES INTERNATIONAL Technical Department.
Pipes used in installations
Pipes used for the construction of installations
- seamless steel precision pipes, protected against corrosion (phosphate-coated, zinc-plated), annealed
- stainless steel precision pipes, cold-drawn, free of annealing scale, heat treated (annealed).
Pipe dimensions (outside diameter, wall thickness) should be chosen according to the required flow rate and
working pressure in an installation.
767

Identification of DIN 2353 pipe fitting
Fittings according to DIN 2353 have up to 4 different connection ends joining them with the remaining part of the
installation. The two most common are:
- connectors with 24 cone or a connection end designed for the connection with 24 cone,
- connectors with one end designed to be screwed into the body (of a particular equipment or machine).
Connectors with 24 cone
1) Designed to be connected with a pipe with D outside diameter. The parts connect when a cutting ring with D
inside diameter is pressed down by a tightening nut with M female thread (code HD-M).
This connection end corresponds exactly to the end fitting of flexible hydraulic hoses such as (code:
TI-ZMZ111... - light series and TI-ZMZ112... - heavy series).
2) Fitting end mating the cone with swivel nut on a conical thread with an additional O-ring.
This connection end corresponds exactly to the end fitting of flexible hydraulic hoses type (code:
TI-ZMZ111... - light series and TI-ZMZ112... - heavy series).
3) Fitting end mating the cone with swivel nut on a pipe end with a cutting ring and a nut.
This connection end corresponds exactly to the end fitting of flexible hydraulic hoses such as (code:
TI-ZMZ111... - light series and TI-ZMZ112... - heavy series), additionally with a cutting ring.
768

Connectors - with male thread, designed to be screwed into the body
A connection end designed to be screwed into the body (of a particular equipment or machine) is identified by the
size of a G male thread as well as sealing type.
picture
seal type
G-type threaded screw
safety factor
metal to metal seal
- BSP parallel thread

- metric parallel thread
2,5 : 1
elastomeric seal
(rectangular shape)

4:1
- UNF-UN
4:1

4:1
DIN3852 B type
DIN3852 E type
ISO 11926
O-ring seal
ISO 1179 G type

ISO 6149 G type
O-ring seal with
retaining ring
DIN 3852
ANSI / ASME
thread seal
PTFE tape
or anaerobic sealant
- BSPT
- metric cone thread
- NPT
2,5 : 1
769

Connectors - with male thread - designed to be screwed into the body
C
C
A-
3/8 BSP
female thread
in the body
B
A
C
B
A
B-
3/8 BSP
G male thread
C-
DIN2353 seat
for pipe D = 12 mm,
light series (12L)
B
A
An example of DIN 2353 connectors used with a valve with imperial female thread is presented above. The table
below shows the range of G male thread pipe sizes in their most common combination with DIN 2353 connectors
(pipe size and series).
G thread male pipe sizes
picture
770
module
pipe O. D.
[mm]
6L
8L
10L
12L
15L
18L
22L
28L
35L
42L
6S
8S
10S
12S
14S
16S
20S
25S
30S
38S
6
8
10
12
15
18
22
28
35
42
6
8
10
12
14
16
20
25
30
38
series
type
L
(light)
S
(heavy)
BSP and NPT

threads
(parallel and taper)
metric threads
(parallel and taper)
UN-UNF
threads
1/8
1/4
1/4
3/8
1/2
1/2
3/4
1
1.1/4
1.1/2
1/4
1/4
3/8
3/8
1/2
1/2
3/4
1
1.1/4
1.1/2
M10x1
M12x1,5
M14x1,5
M16x1,5
M18x1.5
M22x1.5
M26x1,5
M33x2
M42x2
M48x2
M12x1,5
M14x1,5
M16x1,5
M18x1.5
M20x1,5
M22x1.5
M27x2
M33x2
M42x2
M48x2
7/16-20
1/2-20
1/2-20
9/16-20
3/4-16
3/4-16
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
1/2-20
1/2-20
9/16-20
9/16-20
3/4-16
3/4-16
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12

DIN 2353 fittings assembly manual
1. Before start, check whether all tools are free from damage.
2. The length of a pipe should be at least twice as long as tightening nut (H length). The roundness of the pipe
should meet DIN 2391 standard.
3. Pipe should be cut at 90 angle using a metal cutting saw (roll pipe cutters must not be used). Check the cut
angle and deburr internally and externally.
4. Lubricate the inside of the 24 cone seat, thread, tightening nut and cutting ring.
5. Assemble the nut and cutting ring on the pipe as indicated in the picture. Ensure that the head of the cutting
ring (thicker end) faces the tightening nut.
6. Push the pipe against the shoulder of the 24 cone of the body. Screw the nut manually until it is finger tight
and then tighten the nut with a spanner until the cutting edge of the cutting ring starts to bite into the pipe. The
pipe must not rotate during this part of assembly!
7. Push the pipe firmly against the bottom of the cone seat, tighten the nut with a spanner by about 3/4 turn. The
nut and the body can be marked to assure the 3/4 turn. While tightening, the cutting ring bites into the pipe
creating a collar just in front of the ring. Tightening too strong or too weak, weakens the connection and may
cause leakage or loosening of the pipe.
8. Loosen the nut, take out the pipe and check whether the collar in front of the cutting ring edge is visible. The
collar has to be visible on at least 80% of the pipe circumference. Check if the cutting ring is firmly tightened
on the pipe and cannot move alongside. If the grip is not tight enough, the preassembly must be repeated.
9. If the preassembly was correct, push the pipe against the bottom, tighten again about 1/4 turn beyond the point
of clearly perceptible resistance. While tightening the body must be held firm by a spanner or a vice.
10. Preassembly of stainless steel fittings should be performed using special tools.
minimal length
pipe cut
check
deburr
lubrication and assembly
preassembly
start
3/4 turn
check
final assembly
1/4 turn
Assembly machines for DIN 2353 rings

Pre-assembling of DIN2353 cutting rings on hydraulic pipes can be performed on special machines made for that
purpose (see chapter MACHINES AND ACCESSORIES - hose assembly production).
771

Codes of connectors in the catalogue
Connectors are marked with special codes in our catalogue - they should be used when placing an order.
Code example:
HD - G - 12LX
DIN 2353 connectors group
12
material: carbon steel

(S - AISI 316 steel)
12
type of fitting: straight connector

pipe outside diameter: 12 mm
light series
body (without tightening nut and cutting ring)
Code example:
HD - GE - 20S - BE - 12X
DIN 2353 connectors group
20
material: carbon steel

(S - AISI 316 steel)
3/4 BSP
type of fitting: straight connector

pipe outside diameter: 20 mm
heavy series
type of nipple thread: BSP thread
type of seal: elastomeric according to DIN 3852 E type
thread size BSP: 3/4 (12/16)
body (without tightening nut and cutting ring).
772

Nut
Cutting ring
D
press.
[bar]
100
315
160
630
400
315
DU
code
(carbon steel)
code
(AISI 316)
pipe O.D. D
[mm]
HD-M-04LL
HS-M-04LL
8x1
HD-M-06LL
HS-M-06LL
10x1
HD-M-08LL
HS-M-08LL
12x1
HD-M-06L
HS-M-06L
12x1,5
HD-DU-08L
HD-M-08L
HS-M-08L
14x1,5
HD-DU-10L
10
HD-M-10L
HS-M-10L
10
16x1,5
HS-D-12
HD-DU-12L
12
HD-M-12L
HS-M-12L
12
18x1,5
HD-D-15
HS-D-15
HD-DU-15L
15
HD-M-15L
HS-M-15L
15
22x1,5
HD-D-18
HS-D-18
HD-DU-18L
18
HD-M-18L
HS-M-18L
18
26x1,5
HD-D-22
HS-D-22
HD-DU-22L
22
HD-M-22L
HS-M-22L
22
30x2
HD-D-28
HS-D-28
HD-DU-28L
28
HD-M-28L
HS-M-28L
28
36x2
HD-D-35
HS-D-35
HD-DU-35L
35
HD-M-35L
HS-M-35L
35
45x2
HD-D-42
HS-D-42
HD-DU-42L
42
HD-M-42L
HS-M-42L
42
52x2
HD-D-06
HS-D-06
HD-DU-06S
HD-M-06S
HS-M-06S
14x1,5
HD-D-08
HS-D-08
HD-DU-08S
HD-M-08S
HS-M-08S
16x1,5
HD-D-10
HS-D-10
HD-DU-10S
10
HD-M-10S
HS-M-10S
10
18x1,5
HD-D-12
HS-D-12
HD-DU-12S
12
HD-M-12S
HS-M-12S
12
20x1,5
HD-D-14
HS-D-14
HD-DU-14S
14
HD-M-14S
HS-M-14S
14
22x1,5
HD-D-16
HS-D-16
HD-DU-16S
16
HD-M-16S
HS-M-16S
16
24x1,5
HD-D-20
HS-D-20
HD-DU-20S
20
HD-M-20S
HS-M-20S
20
30x2
HD-D-25
HS-D-25
HD-DU-25S
25
HD-M-25S
HS-M-25S
25
36x2
HD-D-30
HS-D-30
HD-DU-30S
30
HD-M-30S
HS-M-30S
30
42x2
HD-D-38
HS-D-38
HD-DU-38S
38
HD-M-38S
HS-M-38S
38
52x2
code
(carbon steel)
code
(AISI 316)
code
(carbon steel)
pipe O.D. D
[mm]
HD-D-04LL
HS-D-04LL
HD-D-06LL
HS-D-06LL
HD-D-08LL
HS-D-08LL
HD-D-06
HS-D-06
HD-DU-06L
HD-D-08
HS-D-08
HD-D-10
HS-D-10
HD-D-12
press.
[bar]
100
315
160
630
400
315
M
[mm]
Example of a connection of a DIN 2353 connector with seamless hydraulic precision pipe
straight connector
HD-G-20S
cutting ring
HD-D-20
nut
HD-M-20S
hydraulic pipe
HR-HPC1-20/3,0
773

90 elbow connector
Straight connector
G
press.
[bar]
100
315
160
630
400
315
code
(carbon steel)
code
(AISI 316)
press.
[bar]
D/M
HD-G-04LLX
HS-G-04LLX
4LL/8x1
HD-G-06LLX
HS-G-06LLX
6LL/10x1
HD-G-08LLX
HS-G-08LLX
8LL/12x1
6L/12x1,5
100
HD-G-06LX
HS-G-06LX
HD-G-08LX
HS-G-08LX
8L/14x1,5
HD-G-10LX
HS-G-10LX
10L/16x1,5
HD-G-12LX
HS-G-12LX
12L/18x1,5
HD-G-15LX
HS-G-15LX
15L/22x1,5
HD-G-18LX
HS-G-18LX
18L/26x1,5
HD-G-22LX
HS-G-22LX
22L/30x2
HD-G-28LX
HS-G-28LX
28L/36x2
HD-G-35LX
HS-G-35LX
35L/45x2
315
160
HD-G-42LX
HS-G-42LX
42L/52x2
HD-G-06SX
HS-G-06SX
6S/14x1,5
HD-G-08SX
HS-G-08SX
8S/16x1,5
HD-G-10SX
HS-G-10SX
10S/18x1,5
HD-G-12SX
HS-G-12SX
12S/20x1,5
HD-G-14SX
HS-G-14SX
14S/22x1,5
HD-G-16SX
HS-G-16SX
16S/24x1,5
HD-G-20SX
HS-G-20SX
20S/30x2
HD-G-25SX
HS-G-25SX
25S/36x2
HD-G-30SX
HS-G-30SX
30S/42x2
HD-G-38SX
HS-G-38SX
38S/52x2
630
400
315
Tee connector
code
(carbon steel)
code
(AISI 316)
D/M
HD-W-04LLX
HS-W-04LLX
4LL/8x1
HD-W-06LLX
HS-W-06LLX
6LL/10x1
HD-W-08LLX
HS-W-08LLX
8LL/12x1
HD-W-06LX
HS-W-06LX
6L/12x1,5
HD-W-08LX
HS-W-08LX
8L/14x1,5
HD-W-10LX
HS-W-10LX
10L/16x1,5
HD-W-12LX
HS-W-12LX
12L/18x1,5
HD-W-15LX
HS-W-15LX
15L/22x1,5
HD-W-18LX
HS-W-18LX
18L/26x1,5
HD-W-22LX
HS-W-22LX
22L/30x2
HD-W-28LX
HS-W-28LX
28L/36x2
HD-W-35LX
HS-W-35LX
35L/45x2
HD-W-42LX
HS-W-42LX
42L/52x2
HD-W-06SX
HS-W-06SX
6S/14x1,5
HD-W-08SX
HS-W-08SX
8S/16x1,5
HD-W-10SX
HS-W-10SX
10S/18x1,5
HD-W-12SX
HS-W-12SX
12S/20x1,5
HD-W-14SX
HS-W-14SX
14S/22x1,5
HD-W-16SX
HS-W-16SX
16S/24x1,5
HD-W-20SX
HS-W-20SX
20S/30x2
HD-W-25SX
HS-W-25SX
25S/36x2
HD-W-30SX
HS-W-30SX
30S/42x2
HD-W-38SX
HS-W-38SX
38S/52x2
Cross connector
T
press.
[bar]
315
160
630
400
315
774
code
(carbon steel)
code
(AISI 316)
D/M
HD-T-06LX
HS-T-06LX
HD-T-08LX
HS-T-08LX
HD-T-10LX
press.
[bar]
code
(carbon steel)
code
(AISI 316)
D/M
6L/12x1,5
HD-K-06LX
HS-K-06LX
6L/12x1,5
8L/14x1,5
HD-K-08LX
HS-K-08LX
8L/14x1,5
HS-T-10LX
10L/16x1,5
HD-K-10LX
HS-K-10LX
10L/16x1,5
HD-T-12LX
HS-T-12LX
12L/18x1,5
HD-K-12LX
HS-K-12LX
12L/18x1,5
HD-T-15LX
HS-T-15LX
15L/22x1,5
HD-K-15LX
HS-K-15LX
15L/22x1,5
HD-T-18LX
HS-T-18LX
18L/26x1,5
HD-K-18LX
HS-K-18LX
18L/26x1,5
HD-T-22LX
HS-T-22LX
22L/30x2
HD-K-22LX
HS-K-22LX
22L/30x2
HD-T-28LX
HS-T-28LX
28L/36x2
HD-K-28LX
HS-K-28LX
28L/36x2
HD-T-35LX
HS-T-35LX
35L/45x2
HD-K-35LX
HS-K-35LX
35L/45x2
HD-T-42LX
HS-T-42LX
42L/52x2
HD-K-42LX
HS-K-42LX
42L/52x2
HD-T-06SX
HS-T-06SX
6S/14x1,5
HD-K-06SX
HS-K-06SX
6S/14x1,5
HD-T-08SX
HS-T-08SX
8S/16x1,5
HD-K-08SX
HS-K-08SX
8S/16x1,5
HD-T-10SX
HS-T-10SX
10S/18x1,5
HD-K-10SX
HS-K-10SX
10S/18x1,5
HD-T-12SX
HS-T-12SX
12S/20x1,5
HD-K-12SX
HS-K-12SX
12S/20x1,5
HD-T-14SX
HS-T-14SX
14S/22x1,5
HD-K-14SX
HS-K-14SX
14S/22x1,5
HD-T-16SX
HS-T-16SX
16S/24x1,5
HD-K-16SX
HS-K-16SX
16S/24x1,5
HD-T-20SX
HS-T-20SX
20S/30x2
HD-K-20SX
HS-K-20SX
20S/30x2
HD-T-25SX
HS-T-25SX
25S/36x2
HD-K-25SX
HS-K-25SX
25S/36x2
HD-T-30SX
HS-T-30SX
30S/42x2
HD-K-30SX
HS-K-30SX
30S/42x2
HD-T-38SX
HS-T-38SX
38S/52x2
HD-K-38SX
HS-K-38SX
38S/52x2
315
160
630
400
315

Straight bulkhead connector
Weld bulkhead connector
SV
press.
[bar]
315
160
630
400
315
code
(carbon steel)
code
(AISI 316)
D/M
HD-SV-06LX
HS-SV-06LX
HD-SV-08LX
HS-SV-08LX
HD-SV-10LX
ESV
code
(carbon steel)
code
(AISI 316)
D/M
A
[mm]
6L/12x1,5
HD-ESV-06LX
HS-ESV-06LX
6L/12x1,5
18
8L/14x1,5
HD-ESV-08LX
HS-ESV-08LX
8L/14x1,5
20
HS-SV-10LX
10L/16x1,5
HD-ESV-10LX
HS-ESV-10LX
10L/16x1,5
22
HD-SV-12LX
HS-SV-12LX
12L/18x1,5
HD-ESV-12LX
HS-ESV-12LX
12L/18x1,5
25
HD-SV-15LX
HS-SV-15LX
15L/22x1,5
HD-ESV-15LX
HS-ESV-15LX
15L/22x1,5
28
HD-SV-18LX
HS-SV-18LX
18L/26x1,5
HD-ESV-18LX
HS-ESV-18LX
18L/26x1,5
32
HD-SV-22LX
HS-SV-22LX
22L/30x2
HD-ESV-22LX
HS-ESV-22LX
22L/30x2
36
HD-SV-28LX
HS-SV-28LX
28L/36x2
HD-ESV-28LX
HS-ESV-28LX
28L/36x2
40
HD-SV-35LX
HS-SV-35LX
35L/45x2
HD-ESV-35LX
HS-ESV-35LX
35L/45x2
50
HD-SV-42LX
HS-SV-42LX
42L/52x2
HD-ESV-42LX
HS-ESV-42LX
42L/52x2
60
HD-SV-06SX
HS-SV-06SX
6S/14x1,5
HD-ESV-06SX
HS-ESV-06SX
6S/14x1,5
20
HD-SV-08SX
HS-SV-08SX
8S/16x1,5
HD-ESV-08SX
HS-ESV-08SX
8S/16x1,5
22
HD-SV-10SX
HS-SV-10SX
10S/18x1,5
HD-ESV-10SX
HS-ESV-10SX
10S/18x1,5
25
HD-SV-12SX
HS-SV-12SX
12S/20x1,5
HD-ESV-12SX
HS-ESV-12SX
12S/20x1,5
28
HD-SV-14SX
HS-SV-14SX
14S/22x1,5
HD-ESV-14SX
HS-ESV-14SX
14S/22x1,5
30
HD-SV-16SX
HS-SV-16SX
16S/24x1,5
HD-ESV-16SX
HS-ESV-16SX
16S/24x1,5
35
HD-SV-20SX
HS-SV-20SX
20S/30x2
HD-ESV-20SX
HS-ESV-20SX
20S/30x2
38
HD-SV-25SX
HS-SV-25SX
25S/36x2
HD-ESV-25SX
HS-ESV-25SX
25S/36x2
45
HD-SV-30SX
HS-SV-30SX
30S/42x2
HD-ESV-30SX
HS-ESV-30SX
30S/42x2
50
HD-SV-38SX
HS-SV-38SX
38S/52x2
HD-ESV-38SX
HS-ESV-38SX
38S/52x2
60
90 elbow bulkhead connector
press.
[bar]
315
160
630
400
315
Flat nut for bulkhead connectors
WSV
press.
[bar]
315
160
630
400
315
MP
code
(carbon steel)
code
(AISI 316)
D/M
press.
[bar]
HD-WSV-06LX
HS-WSV-06LX
6L/12x1,5
HD-MP-06L
HS-MP-06L
12x1,5
HD-WSV-08LX
HS-WSV-08LX
8L/14x1,5
HD-MP-08L/06S
HS-MP-08L/06S
14x1,5
HD-WSV-10LX
HS-WSV-10LX
10L/16x1,5
HD-MP-10L/08S
HS-MP-10L/08S
16x1,5
HD-WSV-12LX
HS-WSV-12LX
12L/18x1,5
HD-MP-12L/10S
HS-MP-12L/10S
18x1,5
HD-WSV-15LX
HS-WSV-15LX
15L/22x1,5
HD-MP-12S
HS-MP-12S
20x1,5
HD-WSV-18LX
HS-WSV-18LX
18L/26x1,5
HD-MP-15L/14S
HS-MP-15L/14S
22x1,5
HD-WSV-22LX
HS-WSV-22LX
22L/30x2
HD-MP-16S
HS-MP-16S
24x1,5
HD-WSV-28LX
HS-WSV-28LX
28L/36x2
HD-MP-18L
HS-MP-18L
26x1,5
HD-WSV-35LX
HS-WSV-35LX
35L/45x2
HD-MP-22L/20S
HS-MP-22L/20S
30x2
HD-WSV-42LX
HS-WSV-42LX
42L/52x2
HD-MP-28L/25S
HS-MP-28L/25S
36x2
HD-WSV-06SX
HS-WSV-06SX
6S/14x1,5
HD-MP-30S
HS-MP-30S
42x2
HD-WSV-08SX
HS-WSV-08SX
8S/16x1,5
HD-MP-35L
HS-MP-35L
48x2
HD-WSV-10SX
HS-WSV-10SX
10S/18x1,5
HD-MP-42L/38S
HS-MP-42L/38S
52x2
HD-WSV-12SX
HS-WSV-12SX
12S/20x1,5
HD-WSV-14SX
HS-WSV-14SX
14S/22x1,5
HD-WSV-16SX
HS-WSV-16SX
16S/24x1,5
HD-WSV-20SX
HS-WSV-20SX
20S/30x2
HD-WSV-25SX
HS-WSV-25SX
25S/36x2
HD-WSV-30SX
HS-WSV-30SX
30S/42x2
HD-WSV-38SX
HS-WSV-38SX
38S/52x2
code
(carbon steel)
code
(AISI 316)
M
[mm]
775

Adjustable straight connector, O-ring seal
Adjustable 90 elbow connector, O-ring seal
EVWO
SNV
press.
[bar]
315
160
630
400
315
code
(carbon steel)
code
(AISI 316)
D/M
HD-SNV-06L
HS-SNV-06L
HD-SNV-08L
HS-SNV-08L
HD-SNV-10L
code
(carbon steel)
code
(AISI 316)
D/M
6L/12x1,5
HD-EVWO-06LX
HS-EVWO-06LX
6L/12x1,5
8L/14x1,5
HD-EVWO-08LX
HS-EVWO-08LX
8L/14x1,5
HS-SNV-10L
10L/16x1,5
HD-EVWO-10LX
HS-EVWO-10LX
10L/16x1,5
HD-SNV-12L
HS-SNV-12L
12L/18x1,5
HD-EVWO-12LX
HS-EVWO-12LX
12L/18x1,5
HD-SNV-15L
HS-SNV-15L
15L/22x1,5
HD-EVWO-15LX
HS-EVWO-15LX
15L/22x1,5
HD-SNV-18L
HS-SNV-18L
18L/26x1,5
HD-EVWO-18LX
HS-EVWO-18LX
18L/26x1,5
HD-SNV-22L
HS-SNV-22L
22L/30x2
HD-EVWO-22LX
HS-EVWO-22LX
22L/30x2
HD-SNV-28L
HS-SNV-28L
28L/36x2
HD-EVWO-28LX
HS-EVWO-28LX
28L/36x2
HD-SNV-35L
HS-SNV-35L
35L/45x2
HD-EVWO-35LX
HS-EVWO-35LX
35L/45x2
HD-SNV-42L
HS-SNV-42L
42L/52x2
HD-EVWO-42LX
HS-EVWO-42LX
42L/52x2
HD-SNV-06S
HS-SNV-06S
6S/14x1,5
HD-EVWO-06SX
HS-EVWO-06SX
6S/14x1,5
HD-SNV-08S
HS-SNV-08S
8S/16x1,5
HD-EVWO-08SX
HS-EVWO-08SX
8S/16x1,5
HD-SNV-10S
HS-SNV-10S
10S/18x1,5
HD-EVWO-10SX
HS-EVWO-10SX
10S/18x1,5
HD-SNV-12S
HS-SNV-12S
12S/20x1,5
HD-EVWO-12SX
HS-EVWO-12SX
12S/20x1,5
HD-SNV-14S
HS-SNV-14S
14S/22x1,5
HD-EVWO-14SX
HS-EVWO-14SX
14S/22x1,5
HD-SNV-16S
HS-SNV-16S
16S/24x1,5
HD-EVWO-16SX
HS-EVWO-16SX
16S/24x1,5
HD-SNV-20S
HS-SNV-20S
20S/30x2
HD-EVWO-20SX
HS-EVWO-20SX
20S/30x2
HD-SNV-25S
HS-SNV-25S
25S/36x2
HD-EVWO-25SX
HS-EVWO-25SX
25S/36x2
HD-SNV-30S
HS-SNV-30S
30S/42x2
HD-EVWO-30SX
HS-EVWO-30SX
30S/42x2
HD-SNV-38S
HS-SNV-38S
38S/52x2
HD-EVWO-38SX
HS-EVWO-38SX
38S/52x2
Adjustable tee connector, O-ring seal
press.
[bar]
315
160
630
400
315
Adjustable tee connector (asymmetric), O-ring

seal
EVLO
EVTO
press.
[bar]
315
160
630
400
315
776
code
(carbon steel)
code
(AISI 316)
D/M
HD-EVTO-06LX
HS-EVTO-06LX
HD-EVTO-08LX
HS-EVTO-08LX
HD-EVTO-10LX
press.
[bar]
code
(carbon steel)
code
(AISI 316)
D/M
6L/12x1,5
HD-EVLO-06LX
HS-EVLO-06LX
6L/12x1,5
8L/14x1,5
HD-EVLO-08LX
HS-EVLO-08LX
8L/14x1,5
HS-EVTO-10LX
10L/16x1,5
HD-EVLO-10LX
HS-EVLO-10LX
10L/16x1,5
HD-EVTO-12LX
HS-EVTO-12LX
12L/18x1,5
HD-EVLO-12LX
HS-EVLO-12LX
12L/18x1,5
HD-EVTO-15LX
HS-EVTO-15LX
15L/22x1,5
HD-EVLO-15LX
HS-EVLO-15LX
15L/22x1,5
HD-EVTO-18LX
HS-EVTO-18LX
18L/26x1,5
HD-EVLO-18LX
HS-EVLO-18LX
18L/26x1,5
HD-EVTO-22LX
HS-EVTO-22LX
22L/30x2
HD-EVLO-22LX
HS-EVLO-22LX
22L/30x2
HD-EVTO-28LX
HS-EVTO-28LX
28L/36x2
HD-EVLO-28LX
HS-EVLO-28LX
28L/36x2
HD-EVTO-35LX
HS-EVTO-35LX
35L/45x2
HD-EVLO-35LX
HS-EVLO-35LX
35L/45x2
HD-EVTO-42LX
HS-EVTO-42LX
42L/52x2
HD-EVLO-42LX
HS-EVLO-42LX
42L/52x2
HD-EVTO-06SX
HS-EVTO-06SX
6S/14x1,5
HD-EVLO-06SX
HS-EVLO-06SX
6S/14x1,5
HD-EVTO-08SX
HS-EVTO-08SX
8S/16x1,5
HD-EVLO-08SX
HS-EVLO-08SX
8S/16x1,5
HD-EVTO-10SX
HS-EVTO-10SX
10S/18x1,5
HD-EVLO-10SX
HS-EVLO-10SX
10S/18x1,5
HD-EVTO-12SX
HS-EVTO-12SX
12S/20x1,5
HD-EVLO-12SX
HS-EVLO-12SX
12S/20x1,5
HD-EVTO-14SX
HS-EVTO-14SX
14S/22x1,5
HD-EVLO-14SX
HS-EVLO-14SX
14S/22x1,5
HD-EVTO-16SX
HS-EVTO-16SX
16S/24x1,5
HD-EVLO-16SX
HS-EVLO-16SX
16S/24x1,5
HD-EVTO-20SX
HS-EVTO-20SX
20S/30x2
HD-EVLO-20SX
HS-EVLO-20SX
20S/30x2
HD-EVTO-25SX
HS-EVTO-25SX
25S/36x2
HD-EVLO-25SX
HS-EVLO-25SX
25S/36x2
HD-EVTO-30SX
HS-EVTO-30SX
30S/42x2
HD-EVLO-30SX
HS-EVLO-30SX
30S/42x2
HD-EVTO-38SX
HS-EVTO-38SX
38S/52x2
HD-EVLO-38SX
HS-EVLO-38SX
38S/52x2
315
160
630
400
315

Straight reducing connector
GR
press.
[bar]
315
160
630
400
315
code
(carbon steel)
code
(AISI 316)
HD-GR-08/06LX
HD-GR-10/06LX
D1/M1
D2/M2
HS-GR-08/06LX
8L/14x1,5
6L/12x1,5
HS-GR-10/06LX
10L/16x1,5
6L/12x1,5
HD-GR-10/08LX
HS-GR-10/08LX
10L/16x1,5
8L/14x1,5
HD-GR-12/06LX
HS-GR-12/06LX
12L/18x1,5
6L/12x1,5
HD-GR-12/08LX
HS-GR-12/08LX
12L/18x1,5
8L/14x1,5
HD-GR-12/10LX
HS-GR-12/10LX
12L/18x1,5
10L/16x1,5
HD-GR-15/10LX
HS-GR-15/10LX
15L/22x1,5
10L/16x1,5
HD-GR-15/12LX
HS-GR-15/12LX
15L/22x1,5
12L/18x1,5
HD-GR-18/10LX
HS-GR-18/10LX
18L/26x1,5
10L/16x1,5
HD-GR-18/12LX
HS-GR-18/12LX
18L/26x1,5
12L/18x1,5
HD-GR-18/15LX
HS-GR-18/15LX
18L/26x1,5
15L/22x1,5
HD-GR-22/12LX
HS-GR-22/12LX
22L/30x2
12L/18x1,5
HD-GR-22/15LX
HS-GR-22/15LX
22L/30x2
15L/22x1,5
HD-GR-22/18LX
HS-GR-22/18LX
22L/30x2
18L/26x1,5
HD-GR-28/18LX
HS-GR-28/18LX
28L/36x2
18L/26x1,5
HD-GR-28/22LX
HS-GR-28/22LX
28L/36x2
22L/30x2
HD-GR-35/22LX
HS-GR-35/22LX
35L/45x2
22L/30x2
HD-GR-35/28LX
HS-GR-35/28LX
35L/45x2
28L/36x2
HD-GR-08/06SX
HS-GR-08/06SX
8S/16x1,5
6S/14x1,5
HD-GR-10/06SX
HS-GR-10/06SX
10S/18x1,5
6S/14x1,5
HD-GR-10/08SX
HS-GR-10/08SX
10S/18x1,5
8S/16x1,5
HD-GR-12/06SX
HS-GR-12/06SX
12S/20x1,5
6S/14x1,5
HD-GR-12/08SX
HS-GR-12/08SX
12S/20x1,5
8S/16x1,5
HD-GR-12/10SX
HS-GR-12/10SX
12S/20x1,5
10S/18x1,5
HD-GR-14/10SX
HS-GR-14/10SX
14S/22x1,5
10S/18x1,5
HD-GR-14/12SX
HS-GR-14/12SX
14S/22x1,5
12S/20x1,5
HD-GR-16/12SX
HS-GR-16/12SX
16S/24x1,5
12S/20x1,5
HD-GR-16/14SX
HS-GR-16/14SX
16S/24x1,5
14S/22x1,5
HD-GR-20/10SX
HS-GR-20/10SX
20S/30x2
10S/18x1,5
HD-GR-20/12SX
HS-GR-20/12SX
20S/30x2
12S/20x1,5
HD-GR-20/16SX
HS-GR-20/16SX
20S/30x2
16S/24x1,5
HD-GR-25/16SX
HS-GR-25/16SX
25S/36x2
16S/24x1,5
HD-GR-25/20SX
HS-GR-25/20SX
25S/36x2
20S/30x2
HD-GR-30/20SX
HS-GR-30/20SX
30S/42x2
20S/30x2
HD-GR-30/25SX
HS-GR-30/25SX
30S/42x2
25S/36x2
HD-GR-38/30SX
HS-GR-38/30SX
38S/52x2
38S/52x2
777

Reducing fitting
Reducing fitting
KORO-L
press.
[bar]
315
160
315
160
315
160
315
160
315
160
778
code
(carbon steel)
code
(AISI 316)
HD-KORO-08/06LX
HD-KORO-10/06LX
D1/M1
D2/M2
HS-KORO-08/06LX
8L/14x1,5
6L/12x1,5
HS-KORO-10/06LX
10L/16x1,5
6L/12x1,5
HD-KORO-12/06LX
HS-KORO-12/06LX
12L/18x1,5
6L/12x1,5
HD-KORO-15/06LX
HS-KORO-15/06LX
15L/22x1,5
HD-KORO-18/06LX
HS-KORO-18/06LX
HD-KORO-22/06LX
KORO-S
press.
[bar]
code
(carbon steel)
code
(AISI 316)
HD-KORO-08/06SX
HD-KORO-10/06SX
D1/M1
D2/M2
HS-KORO-08/06SX
8S/16x1,5
6S/14x1,5
HS-KORO-10/06SX
10S/18x1,5
6S/14x1,5
HD-KORO-12/06SX
HS-KORO-12/06SX
12S/20x1,5
6S/14x1,5
6L/12x1,5
HD-KORO-14/06SX
HS-KORO-14/06SX
14S/22x1,5
6S/14x1,5
18L/26x1,5
6L/12x1,5
HD-KORO-16/06SX
HS-KORO-16/06SX
16S/24x1,5
6S/14x1,5
HS-KORO-22/06LX
22L/30x2
6L/12x1,5
HD-KORO-20/06SX
HS-KORO-20/06SX
20S/30x2
6S/14x1,5
HD-KORO-28/06LX
HS-KORO-28/06LX
28L/36x2
6L/12x1,5
HD-KORO-25/06SX
HS-KORO-25/06SX
25S/36x2
6S/14x1,5
HD-KORO-35/06LX
HS-KORO-35/06LX
35L/45x2
6L/12x1,5
HD-KORO-30/06SX
HS-KORO-30/06SX
30S/42x2
6S/14x1,5
HD-KORO-42/06LX
HS-KORO-42/06LX
42L/52x2
6L/12x1,5
HD-KORO-38/06SX
HS-KORO-38/06SX
38S/52x2
6S/14x1,5
HD-KORO-10/08LX
HS-KORO-10/08LX
10L/16x1,5
8L/14x1,5
HD-KORO-10/08SX
HS-KORO-10/08SX
10S/18x1,5
8S/16x1,5
HD-KORO-12/08LX
HS-KORO-12/08LX
12L/18x1,5
8L/14x1,5
HD-KORO-12/08SX
HS-KORO-12/08SX
12S/20x1,5
8S/16x1,5
HD-KORO-15/08LX
HS-KORO-15/08LX
15L/22x1,5
8L/14x1,5
HD-KORO-14/08SX
HS-KORO-14/08SX
14S/22x1,5
8S/16x1,5
HD-KORO-18/08LX
HS-KORO-18/08LX
18L/26x1,5
8L/14x1,5
HD-KORO-16/08SX
HS-KORO-16/08SX
16S/24x1,5
8S/16x1,5
HD-KORO-22/08LX
HS-KORO-22/08LX
22L/30x2
8L/14x1,5
HD-KORO-20/08SX
HS-KORO-20/08SX
20S/30x2
8S/16x1,5
HD-KORO-28/08LX
HS-KORO-28/08LX
28L/36x2
8L/14x1,5
HD-KORO-25/08SX
HS-KORO-25/08SX
25S/36x2
8S/16x1,5
HD-KORO-35/08LX
HS-KORO-35/08LX
35L/45x2
8L/14x1,5
HD-KORO-30/08SX
HS-KORO-30/08SX
30S/42x2
8S/16x1,5
HD-KORO-42/08LX
HS-KORO-42/08LX
42L/52x2
8L/14x1,5
HD-KORO-38/08SX
HS-KORO-38/08SX
38S/52x2
8S/16x1,5
HD-KORO-12/10LX
HS-KORO-12/10LX
12L/18x1,5
10L/16x1,5
HD-KORO-12/10SX
HS-KORO-12/10SX
12S/20x1,5
10S/18x1,5
HD-KORO-15/10LX
HS-KORO-15/10LX
15L/22x1,5
10L/16x1,5
HD-KORO-14/10SX
HS-KORO-14/10SX
14S/22x1,5
10S/18x1,5
HD-KORO-18/10LX
HS-KORO-18/10LX
18L/26x1,5
10L/16x1,5
HD-KORO-16/10SX
HS-KORO-16/10SX
16S/24x1,5
10S/18x1,5
HD-KORO-22/10LX
HS-KORO-22/10LX
22L/30x2
10L/16x1,5
HD-KORO-20/10SX
HS-KORO-20/10SX
20S/30x2
10S/18x1,5
HD-KORO-28/10LX
HS-KORO-28/10LX
28L/36x2
10L/16x1,5
HD-KORO-25/10SX
HS-KORO-25/10SX
25S/36x2
10S/18x1,5
HD-KORO-35/10LX
HS-KORO-35/10LX
35L/45x2
10L/16x1,5
HD-KORO-30/10SX
HS-KORO-30/10SX
30S/42x2
10S/18x1,5
HD-KORO-42/10LX
HS-KORO-42/10LX
42L/52x2
10L/16x1,5
HD-KORO-38/10SX
HS-KORO-38/10SX
38S/52x2
10S/18x1,5
HD-KORO-15/12LX
HS-KORO-15/12LX
15L/22x1,5
12L/18x1,5
HD-KORO-14/12SX
HS-KORO-14/12SX
14S/22x1,5
12S/20x1,5
HD-KORO-18/12LX
HS-KORO-18/12LX
18L/26x1,5
12L/18x1,5
HD-KORO-16/12SX
HS-KORO-16/12SX
16S/24x1,5
12S/20x1,5
HD-KORO-22/12LX
HS-KORO-22/12LX
22L/30x2
12L/18x1,5
HD-KORO-20/12SX
HS-KORO-20/12SX
20S/30x2
12S/20x1,5
HD-KORO-28/12LX
HS-KORO-28/12LX
28L/36x2
12L/18x1,5
HD-KORO-25/12SX
HS-KORO-25/12SX
25S/36x2
12S/20x1,5
HD-KORO-35/12LX
HS-KORO-35/12LX
35L/45x2
12L/18x1,5
HD-KORO-30/12SX
HS-KORO-30/12SX
30S/42x2
12S/20x1,5
HD-KORO-42/12LX
HS-KORO-42/12LX
42L/52x2
12L/18x1,5
HD-KORO-38/12SX
HS-KORO-38/12SX
38S/52x2
12S/20x1,5
HD-KORO-18/15LX
HS-KORO-18/15LX
18L/26x1,5
15L/22x1,5
HD-KORO-16/14SX
HS-KORO-16/14SX
16S/24x1,5
14S/22x1,5
HD-KORO-22/15LX
HS-KORO-22/15LX
22L/30x2
15L/22x1,5
HD-KORO-20/14SX
HS-KORO-20/14SX
20S/30x2
14S/22x1,5
HD-KORO-28/15LX
HS-KORO-28/15LX
28L/36x2
15L/22x1,5
HD-KORO-25/14SX
HS-KORO-25/14SX
25S/36x2
14S/22x1,5
HD-KORO-35/15LX
HS-KORO-35/15LX
35L/45x2
15L/22x1,5
HD-KORO-30/14SX
HS-KORO-30/14SX
30S/42x2
14S/22x1,5
HD-KORO-42/15LX
HS-KORO-42/15LX
42L/52x2
15L/22x1,5
HD-KORO-38/14SX
HS-KORO-38/14SX
38S/52x2
14S/22x1,5
HD-KORO-22/18LX
HS-KORO-22/18LX
22L/30x2
18L/26x1,5
HD-KORO-20/16SX
HS-KORO-20/16SX
20S/30x2
16S/24x1,5
HD-KORO-28/18LX
HS-KORO-28/18LX
28L/36x2
18L/26x1,5
HD-KORO-25/16SX
HS-KORO-25/16SX
25S/36x2
16S/24x1,5
HD-KORO-35/18LX
HS-KORO-35/18LX
35L/45x2
18L/26x1,5
HD-KORO-30/16SX
HS-KORO-30/16SX
30S/42x2
16S/24x1,5
HD-KORO-42/18LX
HS-KORO-42/18LX
42L/52x2
18L/26x1,5
HD-KORO-38/16SX
HS-KORO-38/16SX
38S/52x2
16S/24x1,5
HD-KORO-28/22LX
HS-KORO-28/22LX
28L/36x2
22L/30x2
HD-KORO-25/20SX
HS-KORO-25/20SX
25S/36x2
20S/30x2
HD-KORO-35/22LX
HS-KORO-35/22LX
35L/45x2
22L/30x2
HD-KORO-30/20SX
HS-KORO-30/20SX
30S/42x2
20S/30x2
HD-KORO-42/22LX
HS-KORO-42/22LX
42L/52x2
22L/30x2
HD-KORO-38/20SX
HS-KORO-38/20SX
38S/52x2
20S/30x2
HD-KORO-35/28LX
HS-KORO-35/28LX
35L/45x2
28L/36x2
HD-KORO-30/25SX
HS-KORO-30/25SX
30S/42x2
25S/36x2
HD-KORO-42/28LX
HS-KORO-42/28LX
42L/52x2
28L/36x2
HD-KORO-38/25SX
HS-KORO-38/25SX
38S/52x2
25S/36x2
HD-KORO-42/35LX
HS-KORO-42/35LX
42L/52x2
35L/45x2
HD-KORO-38/30SX
HS-KORO-38/30SX
38S/52x2
30S/42x2
630
400
315
630
400
315
630
400
250
630
400
315
400
250
400
315
400
315

Nipple BSP parallel thread, DIN 3852-B seal
Nipple metric parallel thread, DIN 3852-B seal
GE - BB
press.
[bar]
315
160
630
400
315
code
(carbon steel)
code
(AISI 316)
D/M
G
[BSP]
HD-GE-06L-BB-02X
HS-GE-06L-BB-02X
6L/12x1,5
HD-GE-08L-BB-04X
HS-GE-08L-BB-04X
8L/14x1,5
HD-GE-10L-BB-04X
HS-GE-10L-BB-04X
10L/16x1,5
1/4
HD-GE-12L-BB-06X
HS-GE-12L-BB-06X
12L/18x1,5
3/8
HD-GE-15L-BB-08X
HS-GE-15L-BB-08X
15L/22x1,5
HD-GE-18L-BB-08X
HS-GE-18L-BB-08X
HD-GE-22L-BB-12X
GE - MB
code
(carbon steel)
code
(AISI 316)
D/M
1/8
HD-GE-06L-MB-10X
HS-GE-06L-MB-10X
6L/12x1,5
10x1
1/4
HD-GE-08L-MB-12X
HS-GE-08L-MB-12X
8L/14x1,5
12x1,5
HD-GE-10L-MB-14X
HS-GE-10L-MB-14X
10L/16x1,5
14x1,5
HD-GE-12L-MB-16X
HS-GE-12L-MB-16X
12L/18x1,5
16x1,5
1/2
HD-GE-15L-MB-18X
HS-GE-15L-MB-18X
15L/22x1,5
18x1,5
18L/26x1,5
1/2
HD-GE-18L-MB-22X
HS-GE-18L-MB-22X
18L/26x1,5
22x1,5
HS-GE-22L-BB-12X
22L/30x2
3/4
HD-GE-22L-MB-26X
HS-GE-22L-MB-26X
22L/30x2
26x1,5
HD-GE-28L-BB-16X
HS-GE-28L-BB-16X
28L/36x2
HD-GE-28L-MB-33X
HS-GE-28L-MB-33X
28L/36x2
33x2
HD-GE-35L-BB-20X
HS-GE-35L-BB-20X
35L/45x2
1.1/4
HD-GE-35L-MB-42X
HS-GE-35L-MB-42X
35L/45x2
42x2
HD-GE-42L-BB-24X
HS-GE-42L-BB-24X
42L/52x2
1.1/2
HD-GE-42L-MB-48X
HS-GE-42L-MB-48X
42L/52x2
48x2
HD-GE-06S-BB-04X
HS-GE-06S-BB-04X
6S/14x1,5
1/4
HD-GE-06S-MB-12X
HS-GE-06S-MB-12X
6S/14x1,5
12x1,5
HD-GE-08S-BB-04X
HS-GE-08S-BB-04X
8S/16x1,5
1/4
HD-GE-08S-MB-14X
HS-GE-08S-MB-14X
8S/16x1,5
14x1,5
HD-GE-10S-BB-06X
HS-GE-10S-BB-06X
10S/18x1,5
3/8
HD-GE-10S-MB-16X
HS-GE-10S-MB-16X
10S/18x1,5
16x1,5
HD-GE-12S-BB-06X
HS-GE-12S-BB-06X
12S/20x1,5
3/8
HD-GE-12S-MB-18X
HS-GE-12S-MB-18X
12S/20x1,5
18x1,5
HD-GE-14S-BB-08X
HS-GE-14S-BB-08X
14S/22x1,5
1/2
HD-GE-14S-MB-20X
HS-GE-14S-MB-20X
14S/22x1,5
20x1,5
HD-GE-16S-BB-08X
HS-GE-16S-BB-08X
16S/24x1,5
1/2
HD-GE-16S-MB-22X
HS-GE-16S-MB-22X
16S/24x1,5
22x1,5
HD-GE-20S-BB-12X
HS-GE-20S-BB-12X
20S/30x2
3/4
HD-GE-20S-MB-27X
HS-GE-20S-MB-27X
20S/30x2
27x2
HD-GE-25S-BB-16X
HS-GE-25S-BB-16X
25S/36x2
HD-GE-25S-MB-33X
HS-GE-25S-MB-33X
25S/36x2
33x2
HD-GE-30S-BB-20X
HS-GE-30S-BB-20X
30S/42x2
1.1/4
HD-GE-30S-MB-42X
HS-GE-30S-MB-42X
30S/42x2
42x2
HD-GE-38S-BB-24X
HS-GE-38S-BB-24X
38S/52x2
1.1/2
HD-GE-38S-MB-48X
HS-GE-38S-MB-48X
38S/52x2
48x2
Nipple BSP parallel thread,DIN 3852-E seal
press.
[bar]
315
160
630
400
315
Nipple metric parallel thread. DIN 3852-E seal
GE - BE
press.
[bar]
100
315
160
630
400
315
code
(carbon steel)
code
(AISI 316)
HD-GE-04LL-BE-02X
HD-GE-06LL-BE-02X
HD-GE-08LL-BE-02X
HD-GE-06L-BE-02X
HD-GE-08L-BE-04X
HD-GE-10L-BE-04X
G
[mm]
GE - ME
D/M
G
[BSP]
press.
[bar]
HS-GE-04LL-BE-02X
4LL/8x1
1/8
HS-GE-06LL-BE-02X
6LL/10x1
1/8
HS-GE-08LL-BE-02X
8LL/12x1
1/8
HD-GE-08LL-ME-10X HS-GE-08LL-ME-10X
8LL/12x1
10x1
HS-GE-06L-BE-02X
6L/12x1,5
1/8
HD-GE-06L-ME-10X
HS-GE-06L-ME-10X
6L/12x1,5
10x1
HS-GE-08L-BE-04X
8L/14x1,5
1/4
HD-GE-08L-ME-12X
HS-GE-08L-ME-12X
8L/14x1,5
12x1,5
HS-GE-10L-BE-04X
10L/16x1,5
1/4
HD-GE-10L-ME-14X
HS-GE-10L-ME-14X
10L/16x1,5
14x1,5
HD-GE-12L-BE-06X
HS-GE-12L-BE-06X
12L/18x1,5
3/8
HD-GE-12L-ME-16X
HS-GE-12L-ME-16X
12L/18x1,5
16x1,5
HD-GE-15L-BE-08X
HS-GE-15L-BE-08X
15L/22x1,5
1/2
HD-GE-15L-ME-18X
HS-GE-15L-ME-18X
15L/22x1,5
18x1,5
HD-GE-18L-BE-08X
HS-GE-18L-BE-08X
18L/26x1,5
1/2
HD-GE-18L-ME-22X
HS-GE-18L-ME-22X
18L/26x1,5
22x1,5
HD-GE-22L-BE-12X
HS-GE-22L-BE-12X
22L/30x2
3/4
HD-GE-22L-ME-26X
HS-GE-22L-ME-26X
22L/30x2
26x1,5
HD-GE-28L-BE-16X
HS-GE-28L-BE-16X
28L/36x2
HD-GE-28L-ME-33X
HS-GE-28L-ME-33X
28L/36x2
33x2
HD-GE-35L-BE-20X
HS-GE-35L-BE-20X
35L/45x2
1.1/4
HD-GE-35L-ME-42X
HS-GE-35L-ME-42X
35L/45x2
42x2
HD-GE-42L-BE-24X
HS-GE-42L-BE-24X
42L/52x2
1.1/2
HD-GE-42L-ME-48X
HS-GE-42L-ME-48X
42L/52x2
48x2
HD-GE-06S-BE-04X
HS-GE-06S-BE-04X
6S/14x1,5
1/4
HD-GE-06S-ME-12X
HS-GE-06S-ME-12X
6S/14x1,5
12x1,5
HD-GE-08S-BE-04X
HS-GE-08S-BE-04X
8S/16x1,5
1/4
HD-GE-08S-ME-14X
HS-GE-08S-ME-14X
8S/16x1,5
14x1,5
HD-GE-10S-BE-06X
HS-GE-10S-BE-06X
10S/18x1,5
3/8
HD-GE-10S-ME-16X
HS-GE-10S-ME-16X
10S/18x1,5
16x1,5
HD-GE-12S-BE-06X
HS-GE-12S-BE-06X
12S/20x1,5
3/8
HD-GE-12S-ME-18X
HS-GE-12S-ME-18X
12S/20x1,5
18x1,5
HD-GE-14S-BE-08X
HS-GE-14S-BE-08X
14S/22x1,5
1/2
HD-GE-14S-ME-20X
HS-GE-14S-ME-20X
14S/22x1,5
20x1,5
HD-GE-16S-BE-08X
HS-GE-16S-BE-08X
16S/24x1,5
1/2
HD-GE-16S-ME-22X
HS-GE-16S-ME-22X
16S/24x1,5
22x1,5
HD-GE-20S-BE-12X
HS-GE-20S-BE-12X
20S/30x2
3/4
HD-GE-20S-ME-27X
HS-GE-20S-ME-27X
20S/30x2
27x2
HD-GE-25S-BE-16X
HS-GE-25S-BE-16X
25S/36x2
HD-GE-25S-ME-33X
HS-GE-25S-ME-33X
25S/36x2
33x2
HD-GE-30S-BE-20X
HS-GE-30S-BE-20X
30S/42x2
1.1/4
HD-GE-30S-ME-42X
HS-GE-30S-ME-42X
30S/42x2
42x2
HD-GE-38S-BE-24X
HS-GE-38S-BE-24X
38S/52x2
1.1/2
HD-GE-38S-ME-48X
HS-GE-38S-ME-48X
38S/52x2
48x2
100
315
160
630
400
315
code
(carbon steel)
code
(AISI 316)
D/M
G
[mm]
4LL/8x1
8x1
6LL/10x1
10x1
779

Nipple BSPT (taper) thread
Nipple metric (taper) thread
GE - MT
GE - BT
press.
[bar]
315
160
630
400
315
code
(carbon steel)
code
(AISI 316)
D/M
G
[BSPT]
HD-GE-06L-BT-02X
HS-GE-06L-BT-02X
6L/12x1,5
HD-GE-08L-BT-04X
HS-GE-08L-BT-04X
8L/14x1,5
HD-GE-10L-BT-04X
HS-GE-10L-BT-04X
10L/16x1,5
1/4
HD-GE-12L-BT-06X
HS-GE-12L-BT-06X
12L/18x1,5
3/8
HD-GE-15L-BT-08X
HS-GE-15L-BT-08X
15L/22x1,5
HD-GE-18L-BT-08X
HS-GE-18L-BT-08X
HD-GE-22L-BT-12X
code
(carbon steel)
code
(AISI 316)
D/M
1/8
HD-GE-06L-MT-10X
HS-GE-06L-MT-10X
6L/12x1,5
10x1
1/4
HD-GE-08L-MT-12X
HS-GE-08L-MT-12X
8L/14x1,5
12x1,5
HD-GE-10L-MT-14X
HS-GE-10L-MT-14X
10L/16x1,5
14x1,5
HD-GE-12L-MT-16X
HS-GE-12L-MT-16X
12L/18x1,5
16x1,5
1/2
HD-GE-15L-MT-18X
HS-GE-15L-MT-18X
15L/22x1,5
18x1,5
18L/26x1,5
1/2
HD-GE-18L-MT-22X
HS-GE-18L-MT-22X
18L/26x1,5
22x1,5
HS-GE-22L-BT-12X
22L/30x2
3/4
HD-GE-06S-MT-12X
HS-GE-06S-MT-12X
6S/14x1,5
12x1,5
HD-GE-28L-BT-16X
HS-GE-28L-BT-16X
28L/36x2
HD-GE-08S-MT-14X
HS-GE-08S-MT-14X
8S/16x1,5
14x1,5
HD-GE-35L-BT-20X
HS-GE-35L-BT-20X
35L/45x2
1.1/4
HD-GE-10S-MT-16X
HS-GE-10S-MT-16X
10S/18x1,5
16x1,5
HD-GE-42L-BT-24X
HS-GE-42L-BT-24X
42L/52x2
1.1/2
HD-GE-12S-MT-18X
HS-GE-12S-MT-18X
12S/20x1,5
18x1,5
HD-GE-06S-BT-04X
HS-GE-06S-BT-04X
6S/14x1,5
1/4
HD-GE-14S-MT-20X
HS-GE-14S-MT-20X
14S/22x1,5
20x1,5
HD-GE-08S-BT-04X
HS-GE-08S-BT-04X
8S/16x1,5
1/4
HD-GE-16S-MT-22X
HS-GE-16S-MT-22X
16S/24x1,5
22x1,5
HD-GE-10S-BT-06X
HS-GE-10S-BT-06X
10S/18x1,5
3/8
HD-GE-12S-BT-06X
HS-GE-12S-BT-06X
12S/20x1,5
3/8
HD-GE-14S-BT-08X
HS-GE-14S-BT-08X
14S/22x1,5
1/2
HD-GE-16S-BT-08X
HS-GE-16S-BT-08X
16S/24x1,5
1/2
HD-GE-20S-BT-12X
HS-GE-20S-BT-12X
20S/30x2
3/4
HD-GE-25S-BT-16X
HS-GE-25S-BT-16X
25S/36x2
HD-GE-30S-BT-20X
HS-GE-30S-BT-20X
30S/42x2
1.1/4
HD-GE-38S-BT-24X
HS-GE-38S-BT-24X
38S/52x2
1.1/2
Nipple NPT (taper) thread
press.
[bar]
315
630
400
Nipple UN-UNF parallel thread. O-ring seal
GE - NT
press.
[bar]
315
160
630
400
315
780
G
[mm]
code
(carbon steel)
code
(AISI 316)
D/M
G
[mm]
HD-GE-06L-NT-02X
HS-GE-06L-NT-02X
6L/12x1,5
HD-GE-08L-NT-04X
HS-GE-08L-NT-04X
8L/14x1,5
HD-GE-10L-NT-04X
HS-GE-10L-NT-04X
10L/16x1,5
1/4
HD-GE-12L-NT-06X
HS-GE-12L-NT-06X
12L/18x1,5
3/8
HD-GE-15L-NT-08X
HS-GE-15L-NT-08X
15L/22x1,5
HD-GE-18L-NT-08X
HS-GE-18L-NT-08X
18L/26x1,5
HD-GE-22L-NT-12X
HS-GE-22L-NT-12X
22L/30x2
HD-GE-28L-NT-16X
HS-GE-28L-NT-16X
28L/36x2
HD-GE-35L-NT-20X
HS-GE-35L-NT-20X
35L/45x2
1.1/4
HD-GE-42L-NT-24X
HS-GE-42L-NT-24X
42L/52x2
HD-GE-06S-NT-04X
HS-GE-06S-NT-04X
HD-GE-08S-NT-04X
GE - UN
press.
[bar]
code
(carbon steel)
code
(AISI 316)
D/M
G
[UN-UNF]
1/8
HD-GE-06L-UN-07X
HS-GE-06L-UN-07X
6L/12x1,5
7/16-20
1/4
HD-GE-08L-UN-08X
HS-GE-08L-UN-08X
8L/14x1,5
1/2-20
HD-GE-10L-UN-08X
HS-GE-10L-UN-08X
10L/16x1,5
1/2-20
HD-GE-12L-UN-09X
HS-GE-12L-UN-09X
12L/18x1,5
9/16-18
1/2
HD-GE-15L-UN-12X
HS-GE-15L-UN-12X
15L/22x1,5
3/4-16
1/2
HD-GE-18L-UN-12X
HS-GE-18L-UN-12X
18L/26x1,5
3/4-16
3/4
HD-GE-22L-UN-17X
HS-GE-22L-UN-17X
22L/30x2
1.1/16-12
HD-GE-28L-UN-21X
HS-GE-28L-UN-21X
28L/36x2
1.5/16-12
HD-GE-35L-UN-26X
HS-GE-35L-UN-26X
35L/45x2
1.5/8-12
1.1/2
HD-GE-42L-UN-30X
HS-GE-42L-UN-30X
42L/52x2
1.7/8-12
6S/14x1,5
1/4
HD-GE-06S-UN-08X
HS-GE-06S-UN-08X
6S/14x1,5
1/2-20
HS-GE-08S-NT-04X
8S/16x1,5
1/4
HD-GE-08S-UN-08X
HS-GE-08S-UN-08X
8S/16x1,5
1/2-20
HD-GE-10S-NT-06X
HS-GE-10S-NT-06X
10S/18x1,5
3/8
HD-GE-10S-UN-09X
HS-GE-10S-UN-09X
10S/18x1,5
9/16-18
HD-GE-12S-NT-06X
HS-GE-12S-NT-06X
12S/20x1,5
3/8
HD-GE-12S-UN-09X
HS-GE-12S-UN-09X
12S/20x1,5
9/16-18
HD-GE-14S-NT-08X
HS-GE-14S-NT-08X
14S/22x1,5
1/2
HD-GE-14S-UN-12X
HS-GE-14S-UN-12X
14S/22x1,5
3/4-16
HD-GE-16S-NT-08X
HS-GE-16S-NT-08X
16S/24x1,5
1/2
HD-GE-16S-UN-12X
HS-GE-16S-UN-12X
16S/24x1,5
3/4-16
HD-GE-20S-NT-12X
HS-GE-20S-NT-12X
20S/30x2
3/4
HD-GE-20S-UN-17X
HS-GE-20S-UN-17X
20S/30x2
1.1/16-12
HD-GE-25S-NT-16X
HS-GE-25S-NT-16X
25S/36x2
HD-GE-25S-UN-21X
HS-GE-25S-UN-21X
25S/36x2
1.5/16-12
HD-GE-30S-NT-20X
HS-GE-30S-NT-20X
30S/42x2
1.1/4
HD-GE-30S-UN-26X
HS-GE-30S-UN-26X
30S/42x2
1.5/8-12
HD-GE-38S-NT-24X
HS-GE-38S-NT-24X
38S/52x2
1.1/2
HD-GE-38S-UN-30X
HS-GE-38S-UN-30X
38S/52x2
1.7/8-12
315
160
630
400
315

Weld connector
Adjustable straight fitting BSP parallel thread,

DIN 3852-E seal
AS
press.
[bar]
315
160
630
400
315
EVGEO - BE
code
(carbon steel)
code
(AISI 316)
D/M
A
[mm]
press.
[bar]
HD-AS-06LX
HS-AS-06LX
6L/12x1,5
10
HD-EVGEO-06L-BE-02
HS-EVGEO-06L-BE-02
6L/12x1,5
1/8
HD-AS-08LX
HS-AS-08LX
8L/14x1,5
12
HD-EVGEO-08L-BE-04
HS-EVGEO-08L-BE-04
8L/14x1,5
1/4
HD-AS-10LX
HS-AS-10LX
10L/16x1,5
14
HD-AS-12LX
HS-AS-12LX
12L/18x1,5
16
HD-AS-15LX
HS-AS-15LX
15L/22x1,5
19
HD-EVGEO-15L-BE-08
HS-EVGEO-15L-BE-08
15L/22x1,5
1/2
HD-AS-18LX
HS-AS-18LX
18L/26x1,5
22
HD-EVGEO-18L-BE-08
HS-EVGEO-18L-BE-08
18L/26x1,5
1/2
HD-AS-22LX
HS-AS-22LX
22L/30x2
27
HD-EVGEO-22L-BE-12
HS-EVGEO-22L-BE-12
22L/30x2
3/4
HD-AS-28LX
HS-AS-28LX
28L/36x2
32
HD-EVGEO-28L-BE-16
HS-EVGEO-28L-BE-16
28L/36x2
HD-AS-35LX
HS-AS-35LX
35L/45x2
40
HD-EVGEO-35L-BE-20
HS-EVGEO-35L-BE-20
35L/45x2
1.1/4
1.1/2
315
160
code
(carbon steel)
160
630
400
315
G
[BSP]
HD-EVGEO-10L-BE-04
HS-EVGEO-10L-BE-04
10L/16x1,5
1/4
HD-EVGEO-12L-BE-06
HS-EVGEO-12L-BE-06
12L/18x1,5
3/8
HD-AS-42LX
HS-AS-42LX
42L/52x2
46
HD-EVGEO-42L-BE-24
HS-EVGEO-42L-BE-24
42L/52x2
HS-AS-06SX
6S/14x1,5
11
HD-EVGEO-06S-BE-04
HS-EVGEO-06S-BE-04
6S/14x1,5
1/4
HD-AS-08SX
HS-AS-08SX
8S/16x1,5
13
HD-EVGEO-08S-BE-04
HS-EVGEO-08S-BE-04
8S/16x1,5
1/4
HD-AS-10SX
HS-AS-10SX
10S/18x1,5
15
HD-AS-12SX
HS-AS-12SX
12S/20x1,5
17
HD-AS-14SX
HS-AS-14SX
14S/22x1,5
19
HD-EVGEO-14S-BE-08
HS-EVGEO-14S-BE-08 14S/22x1,5
1/2
HD-AS-16SX
HS-AS-16SX
16S/24x1,5
21
HD-EVGEO-16S-BE-08
1/2
HD-AS-20SX
HS-AS-20SX
20S/30x2
26
3/4
HD-AS-25SX
HS-AS-25SX
25S/36x2
31
HD-AS-30SX
HS-AS-30SX
30S/42x2
36
HD-AS-38SX
HS-AS-38SX
38S/52x2
44
630
400
315
HD-EVGEO-10S-BE-06
3/8
HD-EVGEO-12S-BE-06
3/8
HD-EVGEO-20S-BE-12
HS-EVGEO-20S-BE-12
20S/30x2
HD-EVGEO-25S-BE-16
HS-EVGEO-25S-BE-16
25S/36x2
HD-EVGEO-30S-BE-20
HS-EVGEO-30S-BE-20
30S/42x2
1.1/4
HD-EVGEO-38S-BE-24
HS-EVGEO-38S-BE-24
38S/52x2
1.1/2
Adjustable straight fitting UN-UNF parallel

thread, O-ring seal
EVGEO - UN
EVGEO - ME
315
D/M
HD-AS-06SX
Adjustable straight fitting metric parallel thread,

DIN 3852-E seal
press.
[bar]
code
(AISI 316)
code
(carbon steel)
code
(AISI 316)
D/M
G
[mm]
press.
[bar]
code
(carbon steel)
code
(AISI 316)
D/M
G
[UN-UNF]
HD-EVGEO-06L-ME-10
HS-EVGEO-06L-ME-10
6L/12x1,5
10x1
HD-EVGEO-06L-UN-07
HS-EVGEO-06L-UN-07
6L/12x1,5
7/16-20
HD-EVGEO-08L-ME-12
HS-EVGEO-08L-ME-12
8L/14x1,5
12x1,5
HD-EVGEO-08L-UN-08
HS-EVGEO-08L-UN-08
8L/14x1,5
1/2-20
HD-EVGEO-10L-ME-14
HS-EVGEO-10L-ME-14 10L/16x1,5
14x1,5
HD-EVGEO-10L-UN-08
HS-EVGEO-10L-UN-08
10L/16x1,5
1/2-20
HD-EVGEO-12L-ME-16
16x1,5
HD-EVGEO-12L-UN-09
HS-EVGEO-12L-UN-09
12L/18x1,5
9/16-18
3/4-16
315
HD-EVGEO-15L-ME-18
18x1,5
HD-EVGEO-15L-UN-12
HS-EVGEO-15L-UN-12
15L/22x1,5
HD-EVGEO-18L-ME-22
22x1,5
HD-EVGEO-18L-UN-12
HS-EVGEO-18L-UN-12
18L/26x1,5
3/4-16
HD-EVGEO-22L-ME-26
HS-EVGEO-22L-ME-26
26x1,5
HD-EVGEO-22L-UN-17
HS-EVGEO-22L-UN-17
22L/30x2
1.1/16-12
HD-EVGEO-28L-UN-21
HS-EVGEO-28L-UN-21
28L/36x2
1.5/16-12
HD-EVGEO-35L-UN-26
HS-EVGEO-35L-UN-26
35L/45x2
1.5/8-12
22L/30x2
HD-EVGEO-28L-ME-33
HS-EVGEO-28L-ME-33
28L/36x2
33x2
HD-EVGEO-35L-ME-42
HS-EVGEO-35L-ME-42
35L/45x2
42x2
HD-EVGEO-42L-ME-48
HS-EVGEO-42L-ME-48
42L/52x2
48x2
HD-EVGEO-42L-UN-30
HS-EVGEO-42L-UN-30
42L/52x2
1.7/8-12
HD-EVGEO-06S-ME-12
HS-EVGEO-06S-ME-12
6S/14x1,5
12x1,5
HD-EVGEO-06S-UN-08
HS-EVGEO-06S-UN-08
6S/14x1,5
1/2-20
HD-EVGEO-08S-ME-14
HS-EVGEO-08S-ME-14
8S/16x1,5
14x1,5
HD-EVGEO-08S-UN-08
HS-EVGEO-08S-UN-08
8S/16x1,5
1/2-20
HD-EVGEO-10S-ME-16
HS-EVGEO-10S-ME-16 10S/18x1,5
16x1,5
HD-EVGEO-10S-UN-09
HS-EVGEO-10S-UN-09 10S/18x1,5 9/16-18
HD-EVGEO-12S-ME-18
18x1,5
HD-EVGEO-12S-UN-09
HS-EVGEO-12S-UN-09 12S/20x1,5 9/16-18
HD-EVGEO-14S-ME-20
20x1,5
HD-EVGEO-14S-UN-12
HS-EVGEO-14S-UN-12 14S/22x1,5
3/4-16
HD-EVGEO-16S-ME-22
22x1,5
HD-EVGEO-16S-UN-12
HS-EVGEO-16S-UN-12 16S/24x1,5
3/4-16
HD-EVGEO-20S-ME-27
HS-EVGEO-20S-ME-27
20S/30x2
27x2
HD-EVGEO-20S-UN-17
HS-EVGEO-20S-UN-17
20S/30x2 1.1/16-12
HD-EVGEO-25S-ME-33
HS-EVGEO-25S-ME-33
25S/36x2
33x2
HD-EVGEO-25S-UN-21
HS-EVGEO-25S-UN-21
25S/36x2 1.5/16-12
HD-EVGEO-30S-ME-42
HS-EVGEO-30S-ME-42
30S/42x2
42x2
HD-EVGEO-30S-UN-26
HS-EVGEO-30S-UN-26
30S/42x2
1.5/8-12
HD-EVGEO-38S-ME-48
HS-EVGEO-38S-ME-48
38S/52x2
48x2
HD-EVGEO-38S-UN-30
HS-EVGEO-38S-UN-30
38S/52x2
1.7/8-12
160
630
400
315
781

Female fitting, BSP female thread
Female fitting, metric female thread
GAI - B
press.
[bar]
315
160
630
400
315
code
(carbon steel)
code
(AISI 316)
D/M
G
[BSP]
HD-GAI-06L-B-02X
HS-GAI-06L-B-02X
6L/12x1,5
HD-GAI-08L-B-04X
HS-GAI-08L-B-04X
8L/14x1,5
HD-GAI-10L-B-04X
HS-GAI-10L-B-04X
10L/16x1,5
1/4
HD-GAI-12L-B-06X
HS-GAI-12L-B-06X
12L/18x1,5
3/8
HD-GAI-15L-B-08X
HS-GAI-15L-B-08X
15L/22x1,5
HD-GAI-18L-B-08X
HS-GAI-18L-B-08X
HD-GAI-22L-B-12X
GAI - M
code
(carbon steel)
code
(AISI 316)
D/M
1/8
HD-GAI-06L-M-10X
HS-GAI-06L-M-10X
6L/12x1,5
10x1
1/4
HD-GAI-08L-M-12X
HS-GAI-08L-M-12X
8L/14x1,5
12x1,5
HD-GAI-10L-M-14X
HS-GAI-10L-M-14X
10L/16x1,5
14x1,5
HD-GAI-12L-M-16X
HS-GAI-12L-M-16X
12L/18x1,5
16x1,5
1/2
HD-GAI-15L-M-18X
HS-GAI-15L-M-18X
15L/22x1,5
18x1,5
18L/26x1,5
1/2
HD-GAI-18L-M-22X
HS-GAI-18L-M-22X
18L/26x1,5
22x1,5
HS-GAI-22L-B-12X
22L/30x2
3/4
HD-GAI-22L-M-26X
HS-GAI-22L-M-26X
22L/30x2
26x1,5
HD-GAI-28L-B-16X
HS-GAI-28L-B-16X
28L/36x2
HD-GAI-28L-M-33X
HS-GAI-28L-M-33X
28L/36x2
33x2
HD-GAI-35L-B-20X
HS-GAI-35L-B-20X
35L/45x2
1.1/4
HD-GAI-35L-M-42X
HS-GAI-35L-M-42X
35L/45x2
42x2
HD-GAI-42L-B-24X
HS-GAI-42L-B-24X
42L/52x2
1.1/2
HD-GAI-42L-M-48X
HS-GAI-42L-M-48X
42L/52x2
48x2
HD-GAI-06S-B-04X
HS-GAI-06S-B-04X
6S/14x1,5
1/4
HD-GAI-06S-M-12X
HS-GAI-06S-M-12X
6S/14x1,5
12x1,5
HD-GAI-08S-B-04X
HS-GAI-08S-B-04X
8S/16x1,5
1/4
HD-GAI-08S-M-14X
HS-GAI-08S-M-14X
8S/16x1,5
14x1,5
HD-GAI-10S-B-06X
HS-GAI-10S-B-06X
10S/18x1,5
3/8
HD-GAI-10S-M-16X
HS-GAI-10S-M-16X
10S/18x1,5
16x1,5
HD-GAI-12S-B-06X
HS-GAI-12S-B-06X
12S/20x1,5
3/8
HD-GAI-12S-M-18X
HS-GAI-12S-M-18X
12S/20x1,5
18x1,5
HD-GAI-14S-B-08X
HS-GAI-14S-B-08X
14S/22x1,5
1/2
HD-GAI-14S-M-20X
HS-GAI-14S-M-20X
14S/22x1,5
20x1,5
HD-GAI-16S-B-08X
HS-GAI-16S-B-08X
16S/24x1,5
1/2
HD-GAI-16S-M-22X
HS-GAI-16S-M-22X
16S/24x1,5
22x1,5
HD-GAI-20S-B-12X
HS-GAI-20S-B-12X
20S/30x2
3/4
HD-GAI-20S-M-27X
HS-GAI-20S-M-27X
20S/30x2
27x2
HD-GAI-25S-B-16X
HS-GAI-25S-B-16X
25S/36x2
HD-GAI-25S-M-33X
HS-GAI-25S-M-33X
25S/36x2
33x2
HD-GAI-30S-B-20X
HS-GAI-30S-B-20X
30S/42x2
1.1/4
HD-GAI-30S-M-42X
HS-GAI-30S-M-42X
30S/42x2
42x2
HD-GAI-38S-B-24X
HS-GAI-38S-B-24X
38S/52x2
1.1/2
HD-GAI-38S-M-48X
HS-GAI-38S-M-48X
38S/52x2
48x2
90 elbow nipple, BSPT (taper) thread
press.
[bar]
315
160
630
400
315
90 elbow nipple, metric (taper) thread
WE - BT
press.
[bar]
315
160
630
400
315
782
G
[mm]
code
(carbon steel)
code
(AISI 316)
D/M
G
[BSPT]
HD-WE-06L-BT-02X
HS-WE-06L-BT-02X
6L/12x1,5
HD-WE-08L-BT-04X
HS-WE-08L-BT-04X
8L/14x1,5
HD-WE-10L-BT-04X
HS-WE-10L-BT-04X
10L/16x1,5
1/4
HD-WE-12L-BT-06X
HS-WE-12L-BT-06X
12L/18x1,5
3/8
HD-WE-15L-BT-08X
HS-WE-15L-BT-08X
15L/22x1,5
HD-WE-18L-BT-08X
HS-WE-18L-BT-08X
HD-WE-22L-BT-12X
WE - MT
press.
[bar]
code
(carbon steel)
code
(AISI 316)
D/M
1/8
HD-WE-06L-MT-10X
HS-WE-06L-MT-10X
6L/12x1,5
10x1
1/4
HD-WE-08L-MT-12X
HS-WE-08L-MT-12X
8L/14x1,5
12x1,5
HD-WE-10L-MT-14X
HS-WE-10L-MT-14X
10L/16x1,5
14x1,5
HD-WE-12L-MT-16X
HS-WE-12L-MT-16X
12L/18x1,5
16x1,5
1/2
HD-WE-15L-MT-18X
HS-WE-15L-MT-18X
15L/22x1,5
18x1,5
18L/26x1,5
1/2
HD-WE-18L-MT-22X
HS-WE-18L-MT-22X
18L/26x1,5
22x1,5
HS-WE-22L-BT-12X
22L/30x2
3/4
HD-WE-06S-MT-12X
HS-WE-06S-MT-12X
6S/14x1,5
12x1,5
HD-WE-28L-BT-16X
HS-WE-28L-BT-16X
28L/36x2
HD-WE-08S-MT-14X
HS-WE-08S-MT-14X
8S/16x1,5
14x1,5
HD-WE-35L-BT-20X
HS-WE-35L-BT-20X
35L/45x2
1.1/4
HD-WE-10S-MT-16X
HS-WE-10S-MT-16X
10S/18x1,5
16x1,5
HD-WE-42L-BT-24X
HS-WE-42L-BT-24X
42L/52x2
1.1/2
HD-WE-12S-MT-18X
HS-WE-12S-MT-18X
12S/20x1,5
18x1,5
HD-WE-06S-BT-04X
HS-WE-06S-BT-04X
6S/14x1,5
1/4
HD-WE-14S-MT-20X
HS-WE-14S-MT-20X
14S/22x1,5
20x1,5
HD-WE-08S-BT-04X
HS-WE-08S-BT-04X
8S/16x1,5
1/4
HD-WE-16S-MT-22X
HS-WE-16S-MT-22X
16S/24x1,5
22x1,5
HD-WE-10S-BT-06X
HS-WE-10S-BT-06X
10S/18x1,5
3/8
HD-WE-12S-BT-06X
HS-WE-12S-BT-06X
12S/20x1,5
3/8
HD-WE-14S-BT-08X
HS-WE-14S-BT-08X
14S/22x1,5
1/2
HD-WE-16S-BT-08X
HS-WE-16S-BT-08X
16S/24x1,5
1/2
HD-WE-20S-BT-12X
HS-WE-20S-BT-12X
20S/30x2
3/4
HD-WE-25S-BT-16X
HS-WE-25S-BT-16X
25S/36x2
HD-WE-30S-BT-20X
HS-WE-30S-BT-20X
30S/42x2
1.1/4
HD-WE-38S-BT-24X
HS-WE-38S-BT-24X
38S/52x2
1.1/2
315
630
400
G
[mm]

90 elbow nipple, NPT (taper) thread
WE - NT
press.
[bar]
315
160
630
400
315
code
(carbon steel)
code
(AISI 316)
D/M
G
[NPT]
HD-WE-06L-NT-02X
HS-WE-06L-NT-02X
6L/12x1,5
1/8
HD-WE-08L-NT-04X
HS-WE-08L-NT-04X
8L/14x1,5
1/4
HD-WE-10L-NT-04X
HS-WE-10L-NT-04X
10L/16x1,5
1/4
HD-WE-12L-NT-06X
HS-WE-12L-NT-06X
12L/18x1,5
3/8
HD-WE-15L-NT-08X
HS-WE-15L-NT-08X
15L/22x1,5
1/2
HD-WE-18L-NT-08X
HS-WE-18L-NT-08X
18L/26x1,5
1/2
HD-WE-22L-NT-12X
HS-WE-22L-NT-12X
22L/30x2
3/4
HD-WE-28L-NT-16X
HS-WE-28L-NT-16X
28L/36x2
HD-WE-35L-NT-20X
HS-WE-35L-NT-20X
35L/45x2
1.1/4
HD-WE-42L-NT-24X
HS-WE-42L-NT-24X
42L/52x2
1.1/2
HD-WE-06S-NT-04X
HS-WE-06S-NT-04X
6S/14x1,5
1/4
HD-WE-08S-NT-04X
HS-WE-08S-NT-04X
8S/16x1,5
1/4
HD-WE-10S-NT-06X
HS-WE-10S-NT-06X
10S/18x1,5
3/8
HD-WE-12S-NT-06X
HS-WE-12S-NT-06X
12S/20x1,5
3/8
HD-WE-14S-NT-08X
HS-WE-14S-NT-08X
14S/22x1,5
1/2
HD-WE-16S-NT-08X
HS-WE-16S-NT-08X
16S/24x1,5
1/2
HD-WE-20S-NT-12X
HS-WE-20S-NT-12X
20S/30x2
3/4
HD-WE-25S-NT-16X
HS-WE-25S-NT-16X
25S/36x2
HD-WE-30S-NT-20X
HS-WE-30S-NT-20X
30S/42x2
1.1/4
HD-WE-38S-NT-24X
HS-WE-38S-NT-24X
38S/52x2
1.1/2
Adjustable 90 elbow nipple, BSP parallel

thread, ISO 1179-G seal
Adjustable 90 elbow nipple, metric parallel

WE - MG
WE - BG
press.
[bar]
315
250
160
315
250
200
160
code
(carbon steel)
code
(AISI 316)
D/M
G
[BSP]
HD-WE-06L-BG-02X
6L/12x1,5
HD-WE-08L-BG-04X
8L/14x1,5
HD-WE-10L-BG-04X
10L/16x1,5
1/4
HD-WE-12L-BG-06X
12L/18x1,5
3/8
HD-WE-15L-BG-08X
15L/22x1,5
1/2
HD-WE-18L-BG-08X
18L/26x1,5
1/2
press.
[bar]
code
(carbon steel)
code
(AISI 316)
D/M
1/8
HD-WE-06L-MG-10X
6L/12x1,5
10x1
1/4
HD-WE-08L-MG-12X
8L/14x1,5
12x1,5
HD-WE-10L-MG-14X
10L/16x1,5
14x1,5
HD-WE-12L-MG-16X
12L/18x1,5
16x1,5
HD-WE-15L-MG-18X
15L/22x1,5
18x1,5
HD-WE-18L-MG-22X
18L/26x1,5
22x1,5
315
250
G
[mm]
HD-WE-22L-BG-12X
22L/30x2
3/4
HD-WE-22L-MG-27X
22L/30x2
27x2
HD-WE-28L-BG-16X
28L/36x2
HD-WE-28L-MG-33X
28L/36x2
33x2
HD-WE-35L-BG-20X
35L/45x2
1.1/4
HD-WE-35L-MG-42X
35L/45x2
42x2
HD-WE-42L-BG-24X
42L/52x2
1.1/2
HD-WE-42L-MG-48X
42L/52x2
48x2
HD-WE-06S-BG-04X
6S/14x1,5
1/4
HD-WE-06S-MG-12X
6S/14x1,5
12x1,5
HD-WE-08S-BG-04X
8S/16x1,5
1/4
HD-WE-08S-MG-14X
8S/16x1,5
14x1,5
HD-WE-10S-BG-06X
10S/18x1,5
3/8
HD-WE-10S-MG-16X
10S/18x1,5
16x1,5
HD-WE-12S-BG-06X
12S/20x1,5
3/8
HD-WE-12S-MG-18X
12S/20x1,5
18x1,5
HD-WE-14S-BG-08X
14S/22x1,5
1/2
HD-WE-14S-MG-20X
14S/22x1,5
20x1,5
HD-WE-16S-BG-08X
16S/24x1,5
1/2
HD-WE-16S-MG-22X
16S/24x1,5
22x1,5
HD-WE-20S-BG-12X
20S/30x2
3/4
HD-WE-20S-MG-27X
20S/30x2
27x2
HD-WE-25S-BG-16X
25S/36x2
HD-WE-25S-MG-33X
25S/36x2
33x2
HD-WE-30S-BG-20X
30S/42x2
1.1/4
HD-WE-30S-MG-42X
30S/42x2
42x2
HD-WE-38S-BG-24X
38S/52x2
1.1/2
HD-WE-38S-MG-48X
38S/52x2
48x2
160
315
250
160
783

Banjo nipple, BSP parallel thread.
DIN 3852-E seal
Banjo nipple, metric parallel thread,

DIN 3852-E seal
WH - BE
press.
[bar]
315
160
630
400
315
code
(carbon steel)
code
(AISI 316)
D/M
G
[BSP]
HD-WH-06L-BE-02X
HS-WH-06L-BE-02X
6L/12x1,5
HD-WH-08L-BE-04X
HS-WH-08L-BE-04X
8L/14x1,5
HD-WH-10L-BE-04X
HS-WH-10L-BE-04X
10L/16x1,5
1/4
HD-WH-12L-BE-06X
HS-WH-12L-BE-06X
12L/18x1,5
3/8
HD-WH-15L-BE-08X
HS-WH-15L-BE-08X
15L/22x1,5
HD-WH-18L-BE-08X
HS-WH-18L-BE-08X
HD-WH-22L-BE-12X
WH - ME
code
(carbon steel)
code
(AISI 316)
D/M
1/8
HD-WH-06L-ME-10X
HS-WH-06L-ME-10X
6L/12x1,5
10x1
1/4
HD-WH-08L-ME-12X
HS-WH-08L-ME-12X
8L/14x1,5
12x1,5
HD-WH-10L-ME-14X
HS-WH-10L-ME-14X
10L/16x1,5
14x1,5
HD-WH-12L-ME-16X
HS-WH-12L-ME-16X
12L/18x1,5
16x1,5
1/2
HD-WH-15L-ME-18X
HS-WH-15L-ME-18X
15L/22x1,5
18x1,5
18L/26x1,5
1/2
HD-WH-18L-ME-22X
HS-WH-18L-ME-22X
18L/26x1,5
22x1,5
HS-WH-22L-BE-12X
22L/30x2
3/4
HD-WH-22L-ME-26X
HS-WH-22L-ME-26X
22L/30x2
26x1,5
HD-WH-28L-BE-16X
HS-WH-28L-BE-16X
28L/36x2
HD-WH-28L-ME-33X
HS-WH-28L-ME-33X
28L/36x2
33x2
HD-WH-35L-BE-20X
HS-WH-35L-BE-20X
35L/45x2
1.1/4
HD-WH-35L-ME-42X
HS-WH-35L-ME-42X
35L/45x2
42x2
HD-WH-42L-BE-24X
HS-WH-42L-BE-24X
42L/52x2
1.1/2
HD-WH-42L-ME-48X
HS-WH-42L-ME-48X
42L/52x2
48x2
HD-WH-06S-BE-04X
HS-WH-06S-BE-04X
6S/14x1,5
1/4
HD-WH-06S-ME-12X
HS-WH-06S-ME-12X
6S/14x1,5
12x1,5
HD-WH-08S-BE-04X
HS-WH-08S-BE-04X
8S/16x1,5
1/4
HD-WH-08S-ME-14X
HS-WH-08S-ME-14X
8S/16x1,5
14x1,5
HD-WH-10S-BE-06X
HS-WH-10S-BE-06X
10S/18x1,5
3/8
HD-WH-10S-ME-16X
HS-WH-10S-ME-16X
10S/18x1,5
16x1,5
HD-WH-12S-BE-06X
HS-WH-12S-BE-06X
12S/20x1,5
3/8
HD-WH-12S-ME-18X
HS-WH-12S-ME-18X
12S/20x1,5
18x1,5
HD-WH-14S-BE-08X
HS-WH-14S-BE-08X
14S/22x1,5
1/2
HD-WH-14S-ME-20X
HS-WH-14S-ME-20X
14S/22x1,5
20x1,5
HD-WH-16S-BE-08X
HS-WH-16S-BE-08X
16S/24x1,5
1/2
HD-WH-16S-ME-22X
HS-WH-16S-ME-22X
16S/24x1,5
22x1,5
HD-WH-20S-BE-12X
HS-WH-20S-BE-12X
20S/30x2
3/4
HD-WH-20S-ME-27X
HS-WH-20S-ME-27X
20S/30x2
27x2
HD-WH-25S-BE-16X
HS-WH-25S-BE-16X
25S/36x2
HD-WH-25S-ME-33X
HS-WH-25S-ME-33X
25S/36x2
33x2
HD-WH-30S-BE-20X
HS-WH-30S-BE-20X
30S/42x2
1.1/4
HD-WH-30S-ME-42X
HS-WH-30S-ME-42X
30S/42x2
42x2
HD-WH-38S-BE-24X
HS-WH-38S-BE-24X
38S/52x2
1.1/2
HD-WH-38S-ME-48X
HS-WH-38S-ME-48X
38S/52x2
48x2
Tee nipple, BSPT (taper) thread
press.
[bar]
315
160
630
400
315
Tee nipple, NPT (taper) thread
TE - BT
press.
[bar]
315
160
630
400
315
784
G
[mm]
code
(carbon steel)
code
(AISI 316)
D/M
G
[BSPT]
HD-TE-06L-BT-02X
HS-TE-06L-BT-02X
6L/12x1,5
HD-TE-08L-BT-04X
HS-TE-08L-BT-04X
8L/14x1,5
HD-TE-10L-BT-04X
HS-TE-10L-BT-04X
HD-TE-12L-BT-06X
TE - NT
press.
[bar]
code
(carbon steel)
code
(AISI 316)
D/M
G
[NPT]
1/8
HD-TE-06L-NT-02X
HS-TE-06L-NT-02X
6L/12x1,5
1/8
1/4
HD-TE-08L-NT-04X
HS-TE-08L-NT-04X
8L/14x1,5
1/4
10L/16x1,5
1/4
HD-TE-10L-NT-04X
HS-TE-10L-NT-04X
10L/16x1,5
1/4
HS-TE-12L-BT-06X
12L/18x1,5
3/8
HD-TE-12L-NT-06X
HS-TE-12L-NT-06X
12L/18x1,5
3/8
HD-TE-15L-BT-08X
HS-TE-15L-BT-08X
15L/22x1,5
1/2
HD-TE-15L-NT-08X
HS-TE-15L-NT-08X
15L/22x1,5
1/2
HD-TE-18L-BT-08X
HS-TE-18L-BT-08X
18L/26x1,5
1/2
HD-TE-18L-NT-08X
HS-TE-18L-NT-08X
18L/26x1,5
1/2
HD-TE-22L-BT-12X
HS-TE-22L-BT-12X
22L/30x2
3/4
HD-TE-22L-NT-12X
HS-TE-22L-NT-12X
22L/30x2
3/4
HD-TE-28L-BT-16X
HS-TE-28L-BT-16X
28L/36x2
HD-TE-28L-NT-16X
HS-TE-28L-NT-16X
28L/36x2
HD-TE-35L-BT-20X
HS-TE-35L-BT-20X
35L/45x2
1.1/4
HD-TE-35L-NT-20X
HS-TE-35L-NT-20X
35L/45x2
1.1/4
315
160
HD-TE-42L-BT-24X
HS-TE-42L-BT-24X
42L/52x2
1.1/2
HD-TE-42L-NT-24X
HS-TE-42L-NT-24X
42L/52x2
1.1/2
HD-TE-06S-BT-04X
HS-TE-06S-BT-04X
6S/14x1,5
1/4
HD-TE-06S-NT-04X
HS-TE-06S-NT-04X
6S/14x1,5
1/4
HD-TE-08S-BT-04X
HS-TE-08S-BT-04X
8S/16x1,5
1/4
HD-TE-08S-NT-04X
HS-TE-08S-NT-04X
8S/16x1,5
1/4
HD-TE-10S-BT-06X
HS-TE-10S-BT-06X
10S/18x1,5
3/8
HD-TE-10S-NT-06X
HS-TE-10S-NT-06X
10S/18x1,5
3/8
HD-TE-12S-BT-06X
HS-TE-12S-BT-06X
12S/20x1,5
3/8
HD-TE-12S-NT-06X
HS-TE-12S-NT-06X
12S/20x1,5
3/8
HD-TE-14S-BT-08X
HS-TE-14S-BT-08X
14S/22x1,5
1/2
HD-TE-14S-NT-08X
HS-TE-14S-NT-08X
14S/22x1,5
1/2
HD-TE-16S-BT-08X
HS-TE-16S-BT-08X
16S/24x1,5
1/2
HD-TE-16S-NT-08X
HS-TE-16S-NT-08X
16S/24x1,5
1/2
HD-TE-20S-BT-12X
HS-TE-20S-BT-12X
20S/30x2
3/4
HD-TE-20S-NT-12X
HS-TE-20S-NT-12X
20S/30x2
3/4
HD-TE-25S-BT-16X
HS-TE-25S-BT-16X
25S/36x2
HD-TE-25S-NT-16X
HS-TE-25S-NT-16X
25S/36x2
HD-TE-30S-BT-20X
HS-TE-30S-BT-20X
30S/42x2
1.1/4
HD-TE-30S-NT-20X
HS-TE-30S-NT-20X
30S/42x2
1.1/4
HD-TE-38S-BT-24X
HS-TE-38S-BT-24X
38S/52x2
1.1/2
HD-TE-38S-NT-24X
HS-TE-38S-NT-24X
38S/52x2
1.1/2
630
400
315

Adjustable tee nipple, BSP parallel thread,
ISO 1179-G sea
Adjustable tee nipple, metric parallel thread,

ISO 6149-G seal
TE - MG
TE - BG
press.
[bar]
315
250
160
315
250
200
160
code
(carbon steel)
code
(AISI 316)
D/M
G
[BSP]
HD-TE-06L-BG-02X
6L/12x1,5
HD-TE-08L-BG-04X
8L/14x1,5
HD-TE-10L-BG-04X
10L/16x1,5
1/4
HD-TE-12L-BG-06X
12L/18x1,5
3/8
HD-TE-15L-BG-08X
15L/22x1,5
1/2
HD-TE-18L-BG-08X
18L/26x1,5
1/2
HD-TE-22L-BG-12X
22L/30x2
HD-TE-28L-BG-16X
HD-TE-35L-BG-20X
code
(carbon steel)
code
(AISI 316)
D/M
1/8
HD-TE-06L-MG-10X
6L/12x1,5
10x1
1/4
HD-TE-08L-MG-12X
8L/14x1,5
12x1,5
HD-TE-10L-MG-14X
10L/16x1,5
14x1,5
HD-TE-12L-MG-16X
12L/18x1,5
16x1,5
HD-TE-15L-MG-18X
15L/22x1,5
18x1,5
HD-TE-18L-MG-22X
18L/26x1,5
22x1,5
3/4
HD-TE-22L-MG-27X
22L/30x2
27x2
28L/36x2
HD-TE-28L-MG-33X
28L/36x2
33x2
35L/45x2
1.1/4
HD-TE-35L-MG-42X
35L/45x2
42x2
HD-TE-42L-BG-24X
42L/52x2
1.1/2
HD-TE-42L-MG-48X
42L/52x2
48x2
HD-TE-06S-BG-04X
6S/14x1,5
1/4
HD-TE-06S-MG-12X
6S/14x1,5
12x1,5
HD-TE-08S-BG-04X
8S/16x1,5
1/4
HD-TE-08S-MG-14X
8S/16x1,5
14x1,5
HD-TE-10S-BG-06X
10S/18x1,5
3/8
HD-TE-10S-MG-16X
10S/18x1,5
16x1,5
HD-TE-12S-BG-06X
12S/20x1,5
3/8
HD-TE-12S-MG-18X
12S/20x1,5
18x1,5
HD-TE-14S-BG-08X
14S/22x1,5
1/2
HD-TE-14S-MG-20X
14S/22x1,5
20x1,5
HD-TE-16S-BG-08X
16S/24x1,5
1/2
HD-TE-16S-MG-22X
16S/24x1,5
22x1,5
HD-TE-20S-BG-12X
20S/30x2
3/4
HD-TE-20S-MG-27X
20S/30x2
27x2
HD-TE-25S-BG-16X
25S/36x2
HD-TE-25S-MG-33X
25S/36x2
33x2
HD-TE-30S-BG-20X
30S/42x2
1.1/4
HD-TE-30S-MG-42X
30S/42x2
42x2
HD-TE-38S-BG-24X
38S/52x2
1.1/2
HD-TE-38S-MG-48X
38S/52x2
48x2
Banjo tee nipple, BSP parallel thread,

DIN 3852-E seal
press.
[bar]
315
250
160
315
250
160
Banjo tee nipple, metric parallel thread,

DIN 3852-E seal
TH - BE
press.
[bar]
315
160
630
400
315
G
[mm]
code
(carbon steel)
code
(AISI 316)
D/M
G
[BSP]
HD-TH-06L-BE-02X
HS-TH-06L-BE-02X
6L/12x1,5
HD-TH-08L-BE-04X
HS-TH-08L-BE-04X
8L/14x1,5
HD-TH-10L-BE-04X
HS-TH-10L-BE-04X
10L/16x1,5
1/4
HD-TH-12L-BE-06X
HS-TH-12L-BE-06X
12L/18x1,5
3/8
HD-TH-15L-BE-08X
HS-TH-15L-BE-08X
15L/22x1,5
HD-TH-18L-BE-08X
HS-TH-18L-BE-08X
HD-TH-22L-BE-12X
TH - ME
press.
[bar]
code
(carbon steel)
code
(AISI 316)
D/M
1/8
HD-TH-06L-ME-10X
HS-TH-06L-ME-10X
6L/12x1,5
10x1
1/4
HD-TH-08L-ME-12X
HS-TH-08L-ME-12X
8L/14x1,5
12x1,5
HD-TH-10L-ME-14X
HS-TH-10L-ME-14X
10L/16x1,5
14x1,5
HD-TH-12L-ME-16X
HS-TH-12L-ME-16X
12L/18x1,5
16x1,5
1/2
HD-TH-15L-ME-18X
HS-TH-15L-ME-18X
15L/22x1,5
18x1,5
18L/26x1,5
1/2
HD-TH-18L-ME-22X
HS-TH-18L-ME-22X
18L/26x1,5
22x1,5
HS-TH-22L-BE-12X
22L/30x2
3/4
HD-TH-22L-ME-26X
HS-TH-22L-ME-26X
22L/30x2
26x1,5
HD-TH-28L-BE-16X
HS-TH-28L-BE-16X
28L/36x2
HD-TH-28L-ME-33X
HS-TH-28L-ME-33X
28L/36x2
33x2
HD-TH-35L-BE-20X
HS-TH-35L-BE-20X
35L/45x2
1.1/4
HD-TH-35L-ME-42X
HS-TH-35L-ME-42X
35L/45x2
42x2
HD-TH-42L-BE-24X
HS-TH-42L-BE-24X
42L/52x2
1.1/2
HD-TH-42L-ME-48X
HS-TH-42L-ME-48X
42L/52x2
48x2
HD-TH-06S-BE-04X
HS-TH-06S-BE-04X
6S/14x1,5
1/4
HD-TH-06S-ME-12X
HS-TH-06S-ME-12X
6S/14x1,5
12x1,5
HD-TH-08S-BE-04X
HS-TH-08S-BE-04X
8S/16x1,5
1/4
HD-TH-08S-ME-14X
HS-TH-08S-ME-14X
8S/16x1,5
14x1,5
HD-TH-10S-BE-06X
HS-TH-10S-BE-06X
10S/18x1,5
3/8
HD-TH-10S-ME-16X
HS-TH-10S-ME-16X
10S/18x1,5
16x1,5
HD-TH-12S-BE-06X
HS-TH-12S-BE-06X
12S/20x1,5
3/8
HD-TH-12S-ME-18X
HS-TH-12S-ME-18X
12S/20x1,5
18x1,5
HD-TH-14S-BE-08X
HS-TH-14S-BE-08X
14S/22x1,5
1/2
HD-TH-14S-ME-20X
HS-TH-14S-ME-20X
14S/22x1,5
20x1,5
HD-TH-16S-BE-08X
HS-TH-16S-BE-08X
16S/24x1,5
1/2
HD-TH-16S-ME-22X
HS-TH-16S-ME-22X
16S/24x1,5
22x1,5
HD-TH-20S-BE-12X
HS-TH-20S-BE-12X
20S/30x2
3/4
HD-TH-20S-ME-27X
HS-TH-20S-ME-27X
20S/30x2
27x2
HD-TH-25S-BE-16X
HS-TH-25S-BE-16X
25S/36x2
HD-TH-25S-ME-33X
HS-TH-25S-ME-33X
25S/36x2
33x2
HD-TH-30S-BE-20X
HS-TH-30S-BE-20X
30S/42x2
1.1/4
HD-TH-30S-ME-42X
HS-TH-30S-ME-42X
30S/42x2
42x2
HD-TH-38S-BE-24X
HS-TH-38S-BE-24X
38S/52x2
1.1/2
HD-TH-38S-ME-48X
HS-TH-38S-ME-48X
38S/52x2
48x2
315
160
630
400
315
G
[mm]
785

Gauge fitting, BSP parallel thread
Blank plug
VKA
MAV - B
press.
[bar]
315
630
code
(carbon steel)
code
(AISI 316)
D/M
G
[BSP]
HD-MAV-06L-B-04X
HS-MAV-06L-B-04X
6L/12x1,5
1/4
HD-MAV-08L-B-04X
HS-MAV-08L-B-04X
8L/14x1,5
1/4
HD-MAV-10L-B-04X
HS-MAV-10L-B-04X
10L/16x1,5
1/4
press.
[bar]
630
HS-VKA-10L/S
10
1/4
HD-VKA-12L/S
HS-VKA-12L/S
12
1/2
HD-VKA-15L
HS-VKA-15L
15
HD-MAV-08S-B-08X
HS-MAV-08S-B-08X
8S/16x1,5
1/2
HD-VKA-18L
HS-VKA-18L
18
HD-MAV-10S-B-08X
HS-MAV-10S-B-08X
10S/18x1,5
1/2
HD-VKA-22L
HS-VKA-22L
22
HD-MAV-12S-B-08X
HS-MAV-12S-B-08X
12S/20x1,5
1/2
HD-VKA-28L
HS-VKA-28L
28
HD-VKA-35L
HS-VKA-35L
35
HD-VKA-42L
HS-VKA-42L
42
HD-VKA-14S
HS-VKA-14S
14
HD-VKA-16S
HS-VKA-16S
16
HD-VKA-20S
HS-VKA-20S
20
HD-VKA-25S
HS-VKA-25S
25
HD-VKA-30S
HS-VKA-30S
30
HD-VKA-38S
HS-VKA-38S
38
315
160
630
code
(carbon steel)
code
(AISI 316)
G
[BSP]
HD-VSTI-02-BE
HS-VSTI-02-BE
1/8
HD-VSTI-04-BE
HS-VSTI-04-BE
1/4
HD-VSTI-06-BE
HS-VSTI-06-BE
3/8
HD-VSTI-08-BE
HS-VSTI-08-BE
1/2
HD-VSTI-12-BE
HS-VSTI-12-BE
3/4
HD-VSTI-16-BE
HS-VSTI-16-BE
HD-VSTI-20-BE
HS-VSTI-20-BE
1.1/4
HD-VSTI-24-BE
HS-VSTI-24-BE
1.1/2
Plug, 24 cone seat
ROV
press.
[bar]
315
VSTI - ME
786
HD-VKA-10L/S
6S/14x1,5
160
250
HS-VKA-08L/S
12L/18x1,5
Plug, metric parallel thread, DIN 3852-E seal
400
HS-VKA-06L/S
HD-VKA-08L/S
HS-MAV-12L-B-04X
VSTI - BE
press.
[bar]
HD-VKA-06L/S
HS-MAV-06S-B-08X
315
250
HD-MAV-12L-B-04X
400
400
code
(AISI 316)
HD-MAV-06S-B-08X
Plug, BSP parallel thread, DIN 3852-E seal
press.
[bar]
code
(carbon steel)
code
(carbon steel)
code
(AISI 316)
G
[mm]
HD-VSTI-10-ME
HS-VSTI-10-ME
10X1
HD-VSTI-12-ME
HS-VSTI-12-ME
12X1,5
HD-VSTI-14-ME
HS-VSTI-14-ME
14X1,5
HD-VSTI-16-ME
HS-VSTI-16-ME
16X1,5
HD-VSTI-18-ME
HS-VSTI-18-ME
18X1,5
HD-VSTI-20-ME
HS-VSTI-20-ME
20X1,5
HD-VSTI-22-ME
HS-VSTI-22-ME
22X1,5
HD-VSTI-26-ME
HS-VSTI-26-ME
26X1,5
HD-VSTI-27-ME
HS-VSTI-27-ME
27X2
HD-VSTI-33-ME
HS-VSTI-33-ME
33X2
HD-VSTI-42-ME
HS-VSTI-42-ME
42X2
HD-VSTI-48-ME
HS-VSTI-48-ME
48X2
630
400
315
code
( galv.steel)
code
(AISI 316)
D/M
HD-ROV-06LX
HS-ROV-06LX
6L/12x1,5
HD-ROV-08LX
HS-ROV-08LX
8L/14x1,5
HD-ROV-10LX
HS-ROV-10LX
10L/16x1,5
HD-ROV-12LX
HS-ROV-12LX
12L/18x1,5
HD-ROV-15LX
HS-ROV-15LX
15L/22x1,5
HD-ROV-18LX
HS-ROV-18LX
18L/26x1,5
HD-ROV-22LX
HS-ROV-22LX
22L/30x2
HD-ROV-28LX
HS-ROV-28LX
28L/36x2
HD-ROV-35LX
HS-ROV-35LX
35L/45x2
HD-ROV-42LX
HS-ROV-42LX
42L/52x2
HD-ROV-06SX
HS-ROV-06SX
6S/14x1,5
HD-ROV-08SX
HS-ROV-08SX
8S/16x1,5
HD-ROV-10SX
HS-ROV-10SX
10S/18x1,5
HD-ROV-12SX
HS-ROV-12SX
12S/20x1,5
HD-ROV-14SX
HS-ROV-14SX
14S/22x1,5
HD-ROV-16SX
HS-ROV-16SX
16S/24x1,5
HD-ROV-20SX
HS-ROV-20SX
20S/30x2
HD-ROV-25SX
HS-ROV-25SX
25S/36x2
HD-ROV-30SX
HS-ROV-30SX
30S/42x2
HD-ROV-38SX
HS-ROV-38SX
38S/52x2
HIGH PRESSURE - JIC 37 connectors

SAE fittings - J514 (JIC 37)
Fittings manufactured according to SAE J514 (ISO 8434-2) standard are widely used in many branches of industry
to connect steel pipes with outside diameter from 6 to 38 mm. Fittings according to SAE J514 can also be used
to connect flexible hose assemblies. Widely used in hydraulic and pneumatic drive and control systems as well
as in industrial applications.
Operation principle of JIC 37
field of force
pressure surfaces
sealing points
The pipes that are to be connected with JIC 37 fittings, must be flared with a flaring machine (hand tools must not
be used). The connection of a fitting with a flared steel pipe with 74 angle cone (37 x 2 = 74) is obtained by a
ferrule in a tightening nut. The flared 37 part of the pipe couples with the conical 37 part of the fitting body assuring metal to metal seal. Fittings with elastomeric sealing (O-ring) are available as well. The fittings according to JIC
37 may also be connected with JIC type fittings (e.g. TI-ZJW110, TI-ZJZ110) of flexible hydraulic hose assemblies.
Technical characteristics
Material:
Zinc-plated carbon steel, stainless steel (AISI 316Ti).
Working pressure:
Depends on the size and type of a fitting. The working pressure of the fitting given in the table is its max. working
pressure (including temporary pressure build-up). Safety factor 4:1 (calculated for static pressure), for a connection of the fitting with a pipe or for fittings with elastomeric sealing. For fittings with taper thread or with metal to
metal seal, the safety factor is 2.5:1.
Working temperature:
from -20 C to +120 C
- for carbon steel fittings:
- for stainless steel fittings: from -60 C to +200 C
For temperatures above +100 C, the max. working pressure may require reduction.
Sealing:
NBR seals are used for carbon steel fittings, Viton (FPM) seals for stainless steel fittings as a standard. Working
temperature range of the seals:
- NBR
from -35C to +100C,
- Viton (FPM)
from -25C to +200C.
Fluid being transferred:
Fittings according to JIC 37 can be used to transfer a wide range of fluids and gases. However, the compatibility of
the medium with fitting material and seal type must be always checked. For all applications different from standard
hydraulic oils, please contact TUBES INTERNATIONAL Technical Department.
787

Codes of connectors in the catalogue
Connectors are marked with special codes in our catalogue - they should be used when placing an order.
Code example:
HJ - G - 09 - SS
JIC 37 connector group
type: straight connector

thread size: male thread JIC 9/16-18
material: AISI 316 steel
(code without SS - made of carbon steel)
Code example:
HJ - GE - 09 - BE - 06 - SS
JIC 37 connector group
type: straight connector

thread size: male thread JIC 9/16-18
type of nipple thread: BSP
sealing according to DIN 3852 E type
thread size: 3/8 BSP (6/16)
material: AISI 316 steel
(code without SS - made of carbon steel)
788

press.
[bar]
description
Ferrule
code
(carbon steel)
code
(AISI 316)
HJ-FM-06
HJ-FC-04
240
HJ-FM-14
HJ-FM-15
HJ-FM-18
HJ-FM-30
HJ-FM-06-SS
HJ-FC-04-SS
HJ-FM-08-SS
HJ-FC-05-SS
HJ-FM-10-SS
HJ-FC-06-SS
HJ-FM-12-SS
HJ-FC-08-SS
HJ-FM-16-SS
HJ-FC-10-SS
HJ-FM-20-SS
HJ-FC-12-SS
HJ-FM-25-SS
HJ-FC-16-SS
HJ-FM-32-SS
HJ-FC-20-SS
HJ-FM-38-SS
HJ-FC-24-SS
HJ-FM-14-SS
HJ-FM-15-SS
HJ-FM-18-SS
HJ-FM-30-SS
press.
[bar]
code
(carbon steel)
code
(AISI 316)
HJ-M-07
HJ-M-08
HJ-M-09
HJ-M-12
HJ-M-14
HJ-M-17
HJ-M-21
HJ-M-26
HJ-M-30
HJ-M-07-SS
HJ-M-08-SS
HJ-M-09-SS
HJ-M-12-SS
HJ-M-14-SS
HJ-M-17-SS
HJ-M-21-SS
HJ-M-26-SS
HJ-M-30-SS
450
HJ-FM-08
350
HJ-FM-10
HJ-FC-06
HJ-FM-12
HJ-FC-08
pipe O.D.
HJ-FM-16
290
240
HJ-FM-20
HJ-FC-12
HJ-FM-25
HJ-FC-16
HJ-FM-32
HJ-FC-20
HJ-FM-38
FM
FC
description
Nut
350
450
350
290
240
pipe O.D.
[mm]
6
8
10
12
16
20
25
32
38
14
15
18
30
pipe O.D.
[mm]
6
8
10
12
14-15-16
18-20
25
30-32
38
[inch]
1/4
5/16
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
-
[inch]
1/4
5/16
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
JIC
[UN-UNF]
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
Example of a connector of a fitting JIC37 connector with seamless hydraulic precision pipe
straight fitting
HJ-G-17
ferrule
HJ-FM-20
nut
HJ-M-17
hydraulic pipe
HR-HPC1-20/3,0
789

press.
[bar]
description
Straight connector
450
350
290
240
G
GR
350
290
press.
[bar]
description
90 elbow connector
450
350
290
240
press.
[bar]
description
Tee connector
450
350
290
240
description
press.
[bar]
Straight bulkhead connector
450
350
290
SV
790
240
code
(carbon steel)
code
(AISI 316)
HJ-G-07
HJ-G-08
HJ-G-09
HJ-G-12
HJ-G-14
HJ-G-17
HJ-G-21
HJ-G-26
HJ-G-30
HJ-GR-09/07
HJ-GR-12/09
HJ-GR-14/12
HJ-GR-17/12
HJ-GR-17/14
HJ-GR-21/17
HJ-G-07-SS
HJ-G-08-SS
HJ-G-09-SS
HJ-G-12-SS
HJ-G-14-SS
HJ-G-17-SS
HJ-G-21-SS
HJ-G-26-SS
HJ-G-30-SS
-
pipe O.D.
[mm]
A
B
6
6
8
8
10
10
12
12
14-15-16 14-15-16
18-20
18-20
25
25
30-32
30-32
38
38
10
6
12
10
14-15-16
12
18-20
12
18-20 14-15-16
25
18-20
code
(carbon steel)
code
(AISI 316)
JIC 37
[UN-UNF]
[inch]
A
1/4
5/16
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
3/8
1/2
5/8
3/4
3/4
1
B
1/4
5/16
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
1/4
3/8
1/2
1/2
5/8
3/4
pipe O.D.
[mm]
A
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
9/16-18
3/4-16
7/8-14
1.1/16-12
1.1/16-12
1.5/16-12
B
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
7/16-20
9/16-18
3/4-16
3/4-16
7/8-14
1.1/16-12
[inch]
JIC 37
[UN-UNF]
7/16-20
HJ-W-07
HJ-W-07-SS
1/4
HJ-W-08
HJ-W-08-SS
5/16
1/2-20
HJ-W-09
HJ-W-09-SS
10
3/8
9/16-18
HJ-W-12
HJ-W-12-SS
12
1/2
3/4-16
HJ-W-14
HJ-W-14-SS
14-15-16
5/8
7/8-14
HJ-W-17
HJ-W-17-SS
18-20
3/4
1.1/16-12
HJ-W-21
HJ-W-21-SS
25
1.5/16-12
HJ-W-26
HJ-W-26-SS
30-32
1.1/4
1.5/8-12
HJ-W-30
HJ-W-30-SS
38
1.1/2
1.7/8-12
code
(carbon steel)
code
(AISI 316)
[mm]
[inch]
JIC 37
[UN-UNF]
pipe O.D.
HJ-T-07
HJ-T-07-SS
1/4
7/16-20
HJ-T-08
HJ-T-08-SS
5/16
1/2-20
HJ-T-09
HJ-T-09-SS
10
3/8
9/16-18
HJ-T-12
HJ-T-12-SS
12
1/2
3/4-16
HJ-T-14
HJ-T-14-SS
14-15-16
5/8
7/8-14
HJ-T-17
HJ-T-17-SS
18-20
3/4
1.1/16-12
HJ-T-20
HJ-T-20-SS
25
1.5/16-12
HJ-T-26
HJ-T-26-SS
30-32
1.1/4
1.5/8-12
HJ-T-30
HJ-T-30-SS
38
1.1/2
1.7/8-12
code
(carbon steel)
code
(AISI 316)
[mm]
[inch]
JIC 37
[UN-UNF]
HJ-SV-07
HJ-SV-07-SS
1/4
7/16-20
HJ-SV-08
HJ-SV-08-SS
5/16
1/2-20
HJ-SV-09
HJ-SV-09-SS
10
3/8
9/16-18
HJ-SV-12
HJ-SV-12-SS
12
1/2
3/4-16
HJ-SV-14
HJ-SV-14-SS
14-15-16
5/8
7/8-14
HJ-SV-17
HJ-SV-17-SS
18-20
3/4
1.1/16-12
pipe O.D.
HJ-SV-21
HJ-SV-21-SS
25
1.5/16-12
HJ-SV-26
HJ-SV-26-SS
30-32
1.1/4
1.5/8-12
HJ-SV-30
HJ-SV-30-SS
38
1.1/2
1.7/8-12

press.
[bar]
description
Adjustable 90 elbow connector
450
350
290
EVW
240
press.
[bar]
description
Adjustable tee connector
450
350
290
EVT
240
press.
[bar]
description
Adjustable tee connector

(asymmetric)
pipe O.D.
code
(carbon steel)
code
(AISI 316)
[mm]
[inch]
JIC 37
[UN-UNF]
HJ-EVW-07
HJ-EVW-07-SS
1/4
7/16-20
HJ-EVW-08
HJ-EVW-08-SS
5/16
1/2-20
HJ-EVW-09
HJ-EVW-09-SS
10
3/8
9/16-18
HJ-EVW-12
HJ-EVW-12-SS
12
1/2
3/4-16
HJ-EVW-14
HJ-EVW-14-SS
14-15-16
5/8
7/8-14
HJ-EVW-17
HJ-EVW-17-SS
18-20
3/4
1.1/16-12
HJ-EVW-21
HJ-EVW-21-SS
25
1.5/16-12
HJ-EVW-26
HJ-EVW-26-SS
30-32
1.1/4
1.5/8-12
HJ-EVW-30
HJ-EVW-30-SS
38
1.1/2
1.7/8-12
code
(carbon steel)
code
(AISI 316)
[mm]
[inch]
JIC 37
[UN-UNF]
HJ-EVT-07
HJ-EVT-07-SS
1/4
7/16-20
HJ-EVT-08
HJ-EVT-08-SS
5/16
1/2-20
HJ-EVT-09
HJ-EVT-09-SS
10
3/8
9/16-18
HJ-EVT-12
HJ-EVT-12-SS
12
1/2
3/4-16
HJ-EVT-14
HJ-EVT-14-SS
14-15-16
5/8
7/8-14
HJ-EVT-17
HJ-EVT-17-SS
18-20
3/4
1.1/16-12
HJ-EVT-21
HJ-EVT-21-SS
25
1.5/16-12
HJ-EVT-26
HJ-EVT-26-SS
30-32
1.1/4
1.5/8-12
HJ-EVT-30
HJ-EVT-30-SS
38
1.1/2
1.7/8-12
code
(carbon steel)
code
(AISI 316)
[mm]
[inch]
JIC 37
[UN-UNF]
HJ-EVL-07
HJ-EVL-07-SS
1/4
7/16-20
HJ-EVL-08
HJ-EVL-08-SS
5/16
1/2-20
HJ-EVL-09
HJ-EVL-09-SS
10
3/8
9/16-18
HJ-EVL-12
HJ-EVL-12-SS
12
1/2
3/4-16
HJ-EVL-14
HJ-EVL-14-SS
14-15-16
5/8
7/8-14
HJ-EVL-17
HJ-EVL-17-SS
18-20
3/4
1.1/16-12
HJ-EVL-21
HJ-EVL-21-SS
25
1.5/16-12
HJ-EVL-26
HJ-EVL-26-SS
30-32
1.1/4
1.5/8-12
HJ-EVL-30
HJ-EVL-30-SS
38
1.1/2
1.7/8-12
pipe O.D.
pipe O.D.
450
350
290
EVL
240
791

description
press.
[bar]
Straight nipple, BSP thread

350
290
240
350
290
GE - BE
description
Straight nipple, UN-UNF

thread
240
press.
[bar]
400
350
290
240
400
350
290
GE - UN
792
240
code
(carbon steel)
HJ-GE-07-BE-02
HJ-GE-08-BE-02
HJ-GE-09-BE-04
HJ-GE-12-BE-06
HJ-GE-14-BE-08
HJ-GE-17-BE-12
HJ-GE-21-BE-16
HJ-GE-26-BE-20
HJ-GE-30-BE-24
HJ-GE-07-BE-04
HJ-GE-07-BE-06
HJ-GE-07-BE-08
HJ-GE-08-BE-04
HJ-GE-08-BE-06
HJ-GE-09-BE-02
HJ-GE-09-BE-06
HJ-GE-09-BE-08
HJ-GE-12-BE-04
HJ-GE-12-BE-08
HJ-GE-12-BE-12
HJ-GE-14-BE-06
HJ-GE-14-BE-12
HJ-GE-17-BE-06
HJ-GE-17-BE-08
HJ-GE-17-BE-16
HJ-GE-21-BE-12
HJ-GE-21-BE-20
HJ-GE-26-BE-16
HJ-GE-26-BE-24
HJ-GE-30-BE-20
code
(AISI 316)
HJ-GE-07-BE-02-SS
HJ-GE-08-BE-02-SS
HJ-GE-09-BE-04-SS
HJ-GE-12-BE-06-SS
HJ-GE-14-BE-08-SS
HJ-GE-17-BE-12-SS
HJ-GE-21-BE-16-SS
HJ-GE-26-BE-20-SS
HJ-GE-30-BE-24-SS
HJ-GE-07-BE-04-SS
HJ-GE-07-BE-08-SS
HJ-GE-08-BE-04-SS
HJ-GE-08-BE-06-SS
HJ-GE-09-BE-02-SS
HJ-GE-09-BE-06-SS
HJ-GE-09-BE-08-SS
HJ-GE-12-BE-04-SS
HJ-GE-12-BE-08-SS
HJ-GE-12-BE-12-SS
HJ-GE-14-BE-06-SS
HJ-GE-14-BE-12-SS
HJ-GE-17-BE-08-SS
HJ-GE-17-BE-16-SS
HJ-GE-21-BE-12-SS
HJ-GE-21-BE-20-SS
HJ-GE-26-BE-16-SS
HJ-GE-26-BE-24-SS
HJ-GE-30-BE-20-SS
pipe O.D.
[mm]
[inch]
6
1/4
8
5/16
10
3/8
12
1/2
14-15-16
5/8
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
6
1/4
6
1/4
6
1/4
8
5/16
8
5/16
10
3/8
10
3/8
10
3/8
12
1/2
12
1/2
12
1/2
14-15-16
5/8
14-15-16
5/8
18-20
3/4
18-20
3/4
18-20
3/4
25
1
25
1
30-32
1.1/4
30-32
1.1/4
38
1.1/2
JIC 37
[UN-UNF]
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
7/16-20
7/16-20
7/16-20
1/2-20
1/2-20
9/16-18
9/16-18
9/16-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-12
1.1/16-12
1.1/16-12
1.5/16-12
1.5/16-12
1.5/8-12
1.5/8-12
1.7/8-12
code
(carbon steel)
HJ-GE-07-UN-07
HJ-GE-08-UN-08
HJ-GE-09-UN-09
HJ-GE-12-UN-12
HJ-GE-14-UN-14
HJ-GE-17-UN-17
HJ-GE-21-UN-21
HJ-GE-26-UN-26
HJ-GE-30-UN-30
HJ-GE-07-UN-08
HJ-GE-07-UN-09
HJ-GE-07-UN-12
HJ-GE-08-UN-09
HJ-GE-09-UN-07
HJ-GE-09-UN-08
HJ-GE-09-UN-12
HJ-GE-09-UN-14
HJ-GE-12-UN-09
HJ-GE-12-UN-14
HJ-GE-12-UN-17
HJ-GE-14-UN-12
HJ-GE-14-UN-17
HJ-GE-17-UN-12
HJ-GE-17-UN-14
HJ-GE-17-UN-21
HJ-GE-21-UN-14
HJ-GE-21-UN-17
HJ-GE-21-UN-26
HJ-GE-26-UN-21
HJ-GE-30-UN-26
code
(AISI 316)
HJ-GE-07-UN-07-SS
HJ-GE-08-UN-08-SS
HJ-GE-09-UN-09-SS
HJ-GE-12-UN-12-SS
HJ-GE-14-UN-14-SS
HJ-GE-17-UN-17-SS
HJ-GE-21-UN-21-SS
-
pipe O.D.
[mm]
[inch]
6
1/4
8
5/16
10
3/8
12
1/2
14-15-16
5/8
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
6
1/4
6
1/4
6
1/4
8
5/16
10
3/8
10
3/8
10
3/8
10
3/8
12
1/2
12
1/2
12
1/2
14-15-16
5/8
14-15-16
5/8
18-20
3/4
18-20
3/4
18-20
3/4
25
1
25
1
25
1
30-32
1.1/4
38
1.1/2
JIC 37
W
[UN-UNF] [UN-UNF]
7/16-20
7/16-20
1/2-20
1/2-20
9/16-18
9/16-18
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-12 1.1/16-12
1.5/16-12 1.5/16-12
1.5/8-12
1.5/8-12
1.7/8-12
1.7/8-12
7/16-20
1/2-20
7/16-20
9/16-18
7/16-20
3/4-16
1/2-20
9/16-18
9/16-18
7/16-20
9/16-18
1/2-20
9/16-18
3/4-16
9/16-18
7/8-14
3/4-16
9/16-18
3/4-16
7/8-14
3/4-16
1.1/16-12
7/8-14
3/4-16
7/8-14
1.1/16-12
1.1/16-12
3/4-16
1.1/16-12
7/8-14
1.1/16-12 1.5/16-12
1.5/16-12
7/8-14
1.5/16-12 1.1/16-12
1.5/16-12 1.5/8-12
1.5/8-12 1.5/16-12
1.7/8-12
1.5/8-12
G
[BSP]
1/8
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
3/8
1/2
1/4
3/8
1/8
3/8
1/2
1/4
1/2
3/4
3/8
3/4
3/8
1/2
1
3/4
1.1/4
1
1.1/2
1.1/4

description
Straight nipple, BSPT (taper)

thread
press.
[bar]
350
290
240
350
290
GE - BT
description
Straight nipple, NPT (taper)

thread
240
press.
[bar]
350
290
240
350
290
GE - NT
240
code
(carbon steel)
code
(AISI 316)
HJ-GE-07-BT-02
HJ-GE-08-BT-02
HJ-GE-09-BT-04
HJ-GE-12-BT-06
HJ-GE-14-BT-08
HJ-GE-17-BT-12
HJ-GE-21-BT-16
HJ-GE-26-BT-20
HJ-GE-30-BT-24
HJ-GE-07-BT-04
HJ-GE-08-BT-04
HJ-GE-09-BT-02
HJ-GE-09-BT-06
HJ-GE-09-BT-08
HJ-GE-12-BT-04
HJ-GE-12-BT-08
HJ-GE-12-BT-12
HJ-GE-14-BT-06
HJ-GE-14-BT-12
HJ-GE-17-BT-08
HJ-GE-17-BT-16
HJ-GE-21-BT-12
HJ-GE-26-BT-16
HJ-GE-30-BT-20
HJ-GE-07-BT-02-SS
HJ-GE-08-BT-02-SS
HJ-GE-09-BT-04-SS
HJ-GE-12-BT-06-SS
HJ-GE-14-BT-08-SS
HJ-GE-17-BT-12-SS
HJ-GE-21-BT-16-SS
HJ-GE-26-BT-20-SS
HJ-GE-30-BT-24-SS
HJ-GE-07-BT-04-SS
HJ-GE-08-BT-04-SS
HJ-GE-09-BT-02-SS
HJ-GE-09-BT-06-SS
HJ-GE-09-BT-08-SS
HJ-GE-12-BT-04-SS
HJ-GE-12-BT-08-SS
HJ-GE-12-BT-12-SS
HJ-GE-14-BT-06-SS
HJ-GE-14-BT-12-SS
HJ-GE-17-BT-08-SS
HJ-GE-17-BT-16-SS
HJ-GE-21-BT-12-SS
HJ-GE-26-BT-16-SS
HJ-GE-30-BT-20-SS
code
(carbon steel)
code
(AISI 316)
HJ-GE-07-NT-02
HJ-GE-08-NT-02
HJ-GE-09-NT-04
HJ-GE-12-NT-06
HJ-GE-14-NT-08
HJ-GE-17-NT-12
HJ-GE-21-NT-16
HJ-GE-26-NT-20
HJ-GE-30-NT-24
HJ-GE-07-NT-04
HJ-GE-07-NT-06
HJ-GE-07-NT-08
HJ-GE-08-NT-04
HJ-GE-09-NT-02
HJ-GE-09-NT-06
HJ-GE-09-NT-08
HJ-GE-12-NT-04
HJ-GE-12-NT-08
HJ-GE-12-NT-12
HJ-GE-07-NT-21
HJ-GE-14-NT-12
HJ-GE-17-NT-08
HJ-GE-17-NT-16
HJ-GE-21-NT-12
HJ-GE-26-NT-16
HJ-GE-30-NT-20
HJ-GE-07-NT-02-SS
HJ-GE-08-NT-02-SS
HJ-GE-09-NT-04-SS
HJ-GE-12-NT-06-SS
HJ-GE-14-NT-08-SS
HJ-GE-17-NT-12-SS
HJ-GE-21-NT-16-SS
HJ-GE-26-NT-20-SS
HJ-GE-30-NT-24-SS
HJ-GE-07-NT-04-SS
HJ-GE-07-NT-06-SS
HJ-GE-07-NT-08-SS
HJ-GE-08-NT-04-SS
HJ-GE-09-NT-02-SS
HJ-GE-09-NT-06-SS
HJ-GE-09-NT-08-SS
HJ-GE-12-NT-04-SS
HJ-GE-12-NT-08-SS
HJ-GE-12-NT-12-SS
HJ-GE-07-NT-21-SS
HJ-GE-14-NT-12-SS
HJ-GE-17-NT-08-SS
HJ-GE-17-NT-16-SS
HJ-GE-21-NT-12-SS
HJ-GE-26-NT-16-SS
HJ-GE-30-NT-20-SS
pipe O.D.
[mm]
[inch]
6
1/4
8
5/16
10
3/8
12
1/2
14-15-16
5/8
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
6
1/4
8
5/16
10
3/8
10
3/8
10
3/8
12
1/2
12
1/2
12
1/2
14-15-16
5/8
14-15-16
5/8
18-20
3/4
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
JIC 37
[UN-UNF]
G
[BSPT]
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
7/16-20
1/2-20
9/16-18
9/16-18
9/16-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-12
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
1/8
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
1/4
1/8
3/8
1/2
1/4
1/2
3/4
3/8
3/4
1/2
1
3/4
1
1.1/4
pipe O.D.
[mm]
[inch]
6
1/4
8
5/16
10
3/8
12
1/2
14-15-16
5/8
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
6
1/4
6
1/4
6
1/4
8
5/16
10
3/8
10
3/8
10
3/8
12
1/2
12
1/2
12
1/2
14-15-16
5/8
14-15-16
5/8
18-20
3/4
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
JIC 37
[UN-UNF]
P
[NPT]
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
7/16-20
7/16-20
7/16-20
1/2-20
9/16-18
9/16-18
9/16-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-12
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
1/8
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
3/8
1/2
1/4
1/8
3/8
1/2
1/4
1/2
3/4
3/8
3/4
1/2
1
3/4
1
1.1/4
793

description
press.
[bar]
Straight nipple, metric thread

350
290
240
350
GE - ME
description
Straight fitting, BSP female

thread
press.
[bar]
350
290
240
350
GAI - B
description
Straight fitting, NPT female

thread
press.
[bar]
350
290
240
350
GAI - N
794
code
(carbon steel)
code
(AISI 316)
HJ-GE-07-ME-10
HJ-GE-08-ME-12
HJ-GE-09-ME-14
HJ-GE-12-ME-16
HJ-GE-14-ME-22
HJ-GE-17-ME-27
HJ-GE-21-ME-33
HJ-GE-26-ME-42
HJ-GE-30-ME-48
HJ-GE-07-ME-12
HJ-GE-08-ME-10
HJ-GE-08-ME-14
HJ-GE-09-ME-16
HJ-GE-12-ME-14
HJ-GE-12-ME-18
HJ-GE-14-ME-18
HJ-GE-14-ME-20
HJ-GE-17-ME-22
HJ-GE-21-ME-27
code
(carbon steel)
code
(AISI 316)
HJ-GAI-07-B-02
HJ-GAI-08-B-02
HJ-GAI-09-B-04
HJ-GAI-12-B-06
HJ-GAI-14-B-08
HJ-GAI-17-B-12
HJ-GAI-21-B-16
HJ-GAI-26-B-20
HJ-GAI-30-B-24
HJ-GAI-07-B-04
HJ-GAI-08-B-04
HJ-GAI-09-B-06
HJ-GAI-09-B-08
HJ-GAI-12-B-04
HJ-GAI-12-B-08
HJ-GAI-17-B-08
HJ-GAI-26-B-16
HJ-GAI-30-B-20
HJ-GAI-07-B-02-SS
HJ-GAI-08-B-02-SS
HJ-GAI-09-B-04-SS
HJ-GAI-12-B-06-SS
HJ-GAI-14-B-08-SS
HJ-GAI-17-B-12-SS
HJ-GAI-21-B-16-SS
HJ-GAI-26-B-20-SS
HJ-GAI-30-B-24-SS
HJ-GAI-07-B-04-SS
HJ-GAI-08-B-04-SS
HJ-GAI-09-B-06-SS
HJ-GAI-12-B-08-SS
-
code
(carbon steel)
code
(AISI 316)
HJ-GAI-07-N-02
HJ-GAI-08-N-02
HJ-GAI-09-N-04
HJ-GAI-12-N-06
HJ-GAI-14-N-08
HJ-GAI-17-N-12
HJ-GAI-21-N-16
HJ-GAI-26-N-20
HJ-GAI-30-N-24
HJ-GAI-07-N-04
HJ-GAI-08-N-04
HJ-GAI-09-N-06
HJ-GAI-12-N-04
HJ-GAI-12-N-08
HJ-GAI-17-N-08
pipe O.D.
[mm]
[inch]
6
1/4
8
5/16
10
3/8
12
1/2
14-15-16
5/8
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
6
1/4
8
5/16
8
5/16
10
3/8
12
1/2
12
1/2
14-15-16
5/8
14-15-16
5/8
18-20
3/4
25
1
JIC 37
[UN-UNF]
M
[mm]
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
7/16-20
1/2-20
1/2-20
9/16-18
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-12
1.5/16-12
10x1
12x1,5
14x1,5
16x1,5
22x1,5
27x2
33x2
42x2
48x2
12x1,5
10x1
14x1,5
16x1,5
14x1,5
18x1,5
18x1,5
20x1,5
22x1,5
27x2
pipe O.D.
[mm]
[inch]
6
1/4
8
5/16
10
3/8
12
1/2
14-15-16
5/8
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
6
1/4
8
5/16
10
3/8
10
3/8
12
1/2
12
1/2
18-20
3/4
30-32
1.1/4
38
1.1/2
JIC 37
[UN-UNF]
G
[BSP]
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
7/16-20
1/2-20
9/16-18
9/16-18
3/4-16
3/4-16
1.1/16-12
1.5/8-12
1.7/8-12
1/8
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
1/4
3/8
1/2
1/4
1/2
1/2
1
1.1/4
pipe O.D.
[mm]
[inch]
6
1/4
8
5/16
10
3/8
12
1/2
14-15-16
5/8
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
6
1/4
8
5/16
10
3/8
12
1/2
12
1/2
18-20
3/4
JIC 37
[UN-UNF]
P
[NPT]
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
7/16-20
1/2-20
9/16-18
3/4-16
3/4-16
1.1/16-12
1/8
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
1/4
3/8
1/4
1/2
1/2

description
Straight fitting, BSP male

thread
press.
[bar]
350
290
240
350
290
EVGE - BE
description
240
press.
[bar]
Straight fitting, BSPT male

thread
350
290
240
350
EVGE - BT
290
code
(carbon steel)
code
(AISI 316)
HJ-EVGE-07-BE-02
HJ-EVGE-08-BE-02
HJ-EVGE-09-BE-04
HJ-EVGE-12-BE-06
HJ-EVGE-14-BE-08
HJ-EVGE-17-BE-12
HJ-EVGE-21-BE-16
HJ-EVGE-26-BE-20
HJ-EVGE-30-BE-24
HJ-EVGE-07-BE-04
HJ-EVGE-07-BE-06
HJ-EVGE-08-BE-04
HJ-EVGE-08-BE-06
HJ-EVGE-09-BE-06
HJ-EVGE-09-BE-08
HJ-EVGE-12-BE-04
HJ-EVGE-12-BE-08
HJ-EVGE-14-BE-06
HJ-EVGE-14-BE-12
HJ-EVGE-17-BE-08
HJ-EVGE-17-BE-16
HJ-EVGE-21-BE-12
HJ-EVGE-21-BE-20
HJ-EVGE-26-BE-16
HJ-EVGE-30-BE-20
HJ-EVGE-07-BE-02-SS
HJ-EVGE-08-BE-02-SS
HJ-EVGE-09-BE-04-SS
HJ-EVGE-12-BE-06-SS
HJ-EVGE-14-BE-08-SS
HJ-EVGE-17-BE-12-SS
HJ-EVGE-21-BE-16-SS
HJ-EVGE-26-BE-20-SS
HJ-EVGE-30-BE-24-SS
HJ-EVGE-07-BE-04-SS
HJ-EVGE-08-BE-04-SS
HJ-EVGE-08-BE-06-SS
HJ-EVGE-09-BE-06-SS
HJ-EVGE-09-BE-08-SS
HJ-EVGE-12-BE-04-SS
HJ-EVGE-12-BE-08-SS
HJ-EVGE-14-BE-06-SS
HJ-EVGE-14-BE-12-SS
HJ-EVGE-17-BE-08-SS
HJ-EVGE-17-BE-16-SS
HJ-EVGE-21-BE-12-SS
HJ-EVGE-26-BE-16-SS
HJ-EVGE-30-BE-20-SS
pipe O.D.
[mm]
[inch]
6
1/4
8
5/16
10
3/8
12
1/2
14-15-16
5/8
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
6
1/4
6
1/4
8
5/16
8
5/16
10
3/8
10
3/8
12
1/2
12
1/2
14-15-16
5/8
14-15-16
5/8
18-20
3/4
18-20
3/4
25
1
25
1
30-32
1.1/4
38
1.1/2
JIC 37
[UN-UNF]
G
[BSP]
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
7/16-20
7/16-20
1/2-20
1/2-20
9/16-18
9/16-18
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-12
1.1/16-12
1.5/16-12
1.5/16-12
1.5/8-12
1.7/8-12
1/8
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
3/8
1/4
3/8
3/8
1/2
1/4
1/2
3/8
3/4
1/2
1
3/4
1.1/4
1
1.1/4
code
(carbon steel)
code
(AISI 316)
JIC 37
[UN-UNF]
G
[BSPT]
HJ-EVGE-07-BT-02
7/16-20
1/8
HJ-EVGE-08-BT-02
1/2-20
1/8
HJ-EVGE-09-BT-04
9/16-18
1/4
HJ-EVGE-12-BT-06
3/4-16
3/8
HJ-EVGE-14-BT-08
7/8-14
1/2
HJ-EVGE-17-BT-12
1.1/16-12
3/4
HJ-EVGE-21-BT-16
1.5/16-12
HJ-EVGE-26-BT-20
1.5/8-12
1.1/4
HJ-EVGE-30-BT-24
1.7/8-12
1.1/2
HJ-EVGE-07-BT-04
7/16-20
1/4
HJ-EVGE-08-BT-04
1/2-20
1/4
HJ-EVGE-09-BT-06
9/16-18
3/8
HJ-EVGE-12-BT-04
3/4-16
1/4
HJ-EVGE-12-BT-08
3/4-16
1/2
HJ-EVGE-14-BT-06
7/8-14
3/8
HJ-EVGE-14-BT-12
7/8-14
3/4
1/2
HJ-EVGE-17-BT-08
1.1/16-12
HJ-EVGE-17-BT-16
1.1/16-12
HJ-EVGE-21-BT-12
1.5/16-12
3/4
795

description
press.
[bar]
Straight fitting, NPT thread

350
290
240
350
EVGE - NT
description
Adjustable 90 elbow nipple,

BSP thread,
ISO 6199-G seal
290
240
JIC 37
[UN-UNF]
P
[NPT]
HJ-EVGE-07-NT-02
HJ-EVGE-08-NT-02
HJ-EVGE-09-NT-04
HJ-EVGE-12-NT-06
HJ-EVGE-14-NT-08
HJ-EVGE-17-NT-12
HJ-EVGE-21-NT-16
HJ-EVGE-26-NT-20
HJ-EVGE-30-NT-24
HJ-EVGE-07-NT-04
HJ-EVGE-08-NT-04
HJ-EVGE-09-NT-02
HJ-EVGE-09-NT-06
HJ-EVGE-09-NT-08
HJ-EVGE-12-NT-04
HJ-EVGE-12-NT-08
HJ-EVGE-12-NT-12
HJ-EVGE-14-NT-06
HJ-EVGE-14-NT-12
HJ-EVGE-17-NT-08
HJ-EVGE-21-NT-12
HJ-EVGE-26-NT-16
HJ-EVGE-07-NT-02-SS
HJ-EVGE-08-NT-02-SS
HJ-EVGE-09-NT-04-SS
HJ-EVGE-12-NT-06-SS
HJ-EVGE-14-NT-08-SS
HJ-EVGE-17-NT-12-SS
HJ-EVGE-21-NT-16-SS
HJ-EVGE-26-NT-20-SS
HJ-EVGE-30-NT-24-SS
HJ-EVGE-07-NT-04-SS
HJ-EVGE-08-NT-04-SS
HJ-EVGE-09-NT-02-SS
HJ-EVGE-09-NT-06-SS
HJ-EVGE-09-NT-08-SS
HJ-EVGE-12-NT-04-SS
HJ-EVGE-12-NT-08-SS
HJ-EVGE-12-NT-12-SS
HJ-EVGE-14-NT-06-SS
HJ-EVGE-14-NT-12-SS
HJ-EVGE-17-NT-08-SS
HJ-EVGE-21-NT-12-SS
HJ-EVGE-26-NT-16-SS
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
7/16-20
1/2-20
9/16-18
9/16-18
9/16-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1/8
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
1/4
1/8
3/8
1/2
1/4
1/2
3/4
3/8
3/4
1/2
3/4
1
code
(carbon steel)
code
(AISI 316)
350
HJ-WE-07-BG-02
HJ-WE-08-BG-04
HJ-WE-09-BG-04
HJ-WE-12-BG-06
HJ-WE-14-BG-08
HJ-WE-17-BG-12
HJ-WE-21-BG-16
HJ-WE-26-BG-20
HJ-WE-30-BG-24
HJ-WE-07-BG-04
HJ-WE-07-BG-06
HJ-WE-07-BG-08
HJ-WE-08-BG-02
HJ-WE-08-BG-06
HJ-WE-09-BG-06
HJ-WE-09-BG-08
HJ-WE-12-BG-04
HJ-WE-12-BG-08
HJ-WE-12-BG-12
HJ-WE-14-BG-06
HJ-WE-14-BG-12
HJ-WE-17-BG-08
HJ-WE-17-BG-16
HJ-WE-21-BG-12
HJ-WE-21-BG-20
HJ-WE-26-BG-16
HJ-WE-30-BG-20
HJ-WE-07-BG-02-SS
HJ-WE-08-BG-04-SS
HJ-WE-09-BG-04-SS
HJ-WE-12-BG-06-SS
HJ-WE-14-BG-08-SS
HJ-WE-17-BG-12-SS
HJ-WE-21-BG-16-SS
HJ-WE-26-BG-20-SS
HJ-WE-30-BG-24-SS
HJ-WE-07-BG-04-SS
HJ-WE-09-BG-06-SS
HJ-WE-09-BG-08-SS
HJ-WE-12-BG-08-SS
HJ-WE-17-BG-08-SS
-
315
200
160
315
250
350
250
315
250
200
250
796
code
(AISI 316)
press.
[bar]
250
WE - BG
code
(carbon steel)
200
pipe O.D.
[mm]
[inch]
6
1/4
8
5/16
10
3/8
12
1/2
14-15-16
5/8
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
6
1/4
6
1/4
6
1/4
8
5/16
8
5/16
10
3/8
10
3/8
12
1/2
12
1/2
12
1/2
14-15-16
5/8
14-15-16
5/8
18-20
3/4
18-20
3/4
25
1
25
1
30-32
1.1/4
38
1.1/2
JIC 37
[UN-UNF]
G
[BSP]
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
17/8-12
7/16-20
7/16-20
7/16-20
1/2-20
1/2-20
9/16-18
9/16-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-12
1.1/16-12
1.5/16-12
1.5/16-12
1.5/8-12
1.7/8-12
1/8
1/4
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
3/8
1/2
1/8
3/8
3/8
1/2
1/4
1/2
3/4
3/8
3/4
1/2
1
3/4
1.1/4
1
1.1/4

description
90 elbow nipple, BSPT

(taper) thread
press.
[bar]
code
(carbon steel)
code
(AISI 316)
240
HJ-WE-07-BT-02
HJ-WE-08-BT-02
HJ-WE-09-BT-04
HJ-WE-12-BT-06
HJ-WE-14-BT-08
HJ-WE-17-BT-12
HJ-WE-21-BT-16
HJ-WE-26-BT-20
HJ-WE-30-BT-24
HJ-WE-07-BT-04
HJ-WE-08-BT-04
HJ-WE-09-BT-02
HJ-WE-09-BT-06
HJ-WE-09-BT-08
HJ-WE-12-BT-04
HJ-WE-12-BT-08
HJ-WE-12-BT-12
HJ-WE-14-BT-06
HJ-WE-14-BT-12
HJ-WE-17-BT-08
HJ-WE-17-BT-16
HJ-WE-21-BT-12
HJ-WE-26-BT-16
HJ-WE-07-BT-02-SS
HJ-WE-08-BT-02-SS
HJ-WE-09-BT-04-SS
HJ-WE-12-BT-06-SS
HJ-WE-14-BT-08-SS
HJ-WE-17-BT-12-SS
HJ-WE-21-BT-16-SS
HJ-WE-26-BT-20-SS
HJ-WE-30-BT-24-SS
HJ-WE-07-BT-04-SS
HJ-WE-08-BT-04-SS
HJ-WE-09-BT-02-SS
HJ-WE-09-BT-06-SS
HJ-WE-09-BT-08-SS
HJ-WE-12-BT-04-SS
HJ-WE-12-BT-08-SS
HJ-WE-14-BT-06-SS
HJ-WE-14-BT-12-SS
HJ-WE-17-BT-08-SS
HJ-WE-17-BT-16-SS
HJ-WE-21-BT-12-SS
HJ-WE-26-BT-16-SS
press.
[bar]
code
(carbon steel)
code
(AISI 316)
HJ-WE-07-NT-02
HJ-WE-08-NT-02
HJ-WE-09-NT-04
HJ-WE-12-NT-06
HJ-WE-14-NT-08
HJ-WE-17-NT-12
HJ-WE-21-NT-16
HJ-WE-26-NT-20
HJ-WE-30-NT-24
HJ-WE-07-NT-04
HJ-WE-07-NT-06
HJ-WE-07-NT-08
HJ-WE-08-NT-04
HJ-WE-09-NT-02
HJ-WE-09-NT-06
HJ-WE-09-NT-08
HJ-WE-12-NT-04
HJ-WE-12-NT-08
HJ-WE-12-NT-12
HJ-WE-14-NT-06
HJ-WE-14-NT-12
HJ-WE-17-NT-08
HJ-WE-17-NT-16
HJ-WE-21-NT-12
HJ-WE-21-NT-20
HJ-WE-26-NT-16
HJ-WE-26-NT-24
HJ-WE-30-NT-20
HJ-WE-07-NT-02-SS
HJ-WE-08-NT-02-SS
HJ-WE-09-NT-04-SS
HJ-WE-12-NT-06-SS
HJ-WE-14-NT-08-SS
HJ-WE-17-NT-12-SS
HJ-WE-21-NT-16-SS
HJ-WE-26-NT-20-SS
HJ-WE-30-NT-24-SS
HJ-WE-07-NT-04-SS
HJ-WE-07-NT-06-SS
HJ-WE-08-NT-04-SS
HJ-WE-09-NT-02-SS
HJ-WE-09-NT-06-SS
HJ-WE-09-NT-08-SS
HJ-WE-12-NT-04-SS
HJ-WE-12-NT-08-SS
HJ-WE-14-NT-06-SS
HJ-WE-14-NT-12-SS
HJ-WE-17-NT-08-SS
HJ-WE-17-NT-16-SS
HJ-WE-21-NT-12-SS
HJ-WE-26-NT-16-SS
HJ-WE-30-NT-20-SS
350
290
240
350
WE - BT
description
90 elbow nipple, NPT

(taper) thread
290
350
290
240
350
290
WE - NT
240
pipe O.D.
[mm]
[inch]
6
1/4
8
5/16
10
3/8
12
1/2
14-15-16
5/8
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
6
1/4
8
5/16
10
3/8
10
3/8
10
3/8
12
1/2
12
1/2
12
1/2
14-15-16
5/8
14-15-16
5/8
18-20
3/4
18-20
3/4
25
1
30-32
1.1/4
JIC 37
[UN-UNF]
G
[BSPT]
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
7/16-20
1/2-20
9/16-18
9/16-18
9/16-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-12
1.1/16-12
1.5/16-12
1.5/8-12
1/8
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
1/4
1/8
3/8
1/2
1/4
1/2
3/4
3/8
3/4
1/2
1
3/4
1
pipe O.D.
[mm]
[inch]
6
1/4
8
5/16
10
3/8
12
1/2
14-15-16
5/8
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
6
1/4
6
1/4
6
1/4
8
5/16
10
3/8
10
3/8
10
3/8
12
1/2
12
1/2
12
1/2
14-15-16
5/8
14-15-16
5/8
18-20
3/4
18-20
3/4
25
1
25
1
30-32
1.1/4
30-32
1.1/4
38
1.1/2
JIC 37
[UN-UNF]
P
[NPT]
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
7/16-20
7/16-20
7/16-20
1/2-20
9/16-18
9/16-18
9/16-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-12
1.1/16-12
1.5/16-12
1.5/16-12
1.5/8-12
1.5/8-12
1.7/8-12
1/8
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
3/8
1/2
1/4
1/8
3/8
1/2
1/4
1/2
3/4
3/8
3/4
1/2
1
3/4
1.1/4
1
1.1/2
1.1/4
797

description
Adjustable tee nipple, BSP

press.
[bar]
code
(carbon steel)
code
(AISI 316)
350
HJ-TE-07-BG-02
HJ-TE-08-BG-04
HJ-TE-09-BG-04
HJ-TE-12-BG-06
HJ-TE-14-BG-08
HJ-TE-17-BG-12
HJ-TE-21-BG-16
HJ-TE-26-BG-20
HJ-TE-30-BG-24
HJ-TE-07-BG-04
HJ-TE-07-BG-06
HJ-TE-07-BG-08
HJ-TE-08-BG-02
HJ-TE-08-BG-06
HJ-TE-09-BG-06
HJ-TE-09-BG-08
HJ-TE-12-BG-04
HJ-TE-12-BG-08
HJ-TE-12-BG-12
HJ-TE-14-BG-06
HJ-TE-14-BG-12
HJ-TE-17-BG-08
HJ-TE-17-BG-16
HJ-TE-21-BG-12
HJ-TE-21-BG-20
HJ-TE-26-BG-16
HJ-TE-30-BG-20
press.
[bar]
code
(carbon steel)
code
(AISI 316)
350
HJ-LE-07-BG-02
HJ-LE-08-BG-04
HJ-LE-09-BG-04
HJ-LE-12-BG-06
HJ-LE-14-BG-08
HJ-LE-17-BG-12
HJ-LE-21-BG-16
HJ-LE-26-BG-20
HJ-LE-30-BG-24
HJ-LE-07-BG-04
HJ-LE-07-BG-06
HJ-LE-07-BG-08
HJ-LE-08-BG-02
HJ-LE-08-BG-06
HJ-LE-09-BG-06
HJ-LE-09-BG-08
HJ-LE-12-BG-04
HJ-LE-12-BG-08
HJ-LE-12-BG-12
HJ-LE-14-BG-06
HJ-LE-14-BG-12
HJ-LE-17-BG-08
HJ-LE-17-BG-16
HJ-LE-21-BG-12
HJ-LE-21-BG-20
HJ-LE-26-BG-16
HJ-LE-30-BG-20
315
250
200
160
315
250
350
250
315
250
200
250
TE - BG
description
Adjustable tee nipple, BSP

200
315
250
200
160
315
250
350
250
315
250
200
250
LE - BG
798
200
pipe O.D.
[mm]
[inch]
6
1/4
8
5/16
10
3/8
12
1/2
14-15-16
5/8
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
6
1/4
6
1/4
6
1/4
8
5/16
8
5/16
10
3/8
10
3/8
12
1/2
12
1/2
12
1/2
14-15-16
5/8
14-15-16
5/8
18-20
3/4
18-20
3/4
25
1
25
1
30-32
1.1/4
38
1.1/2
JIC 37
[UN-UNF]
G
[BSP]
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
17/8-12
7/16-20
7/16-20
7/16-20
1/2-20
1/2-20
9/16-18
9/16-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-12
1.1/16-12
1.5/16-12
1.5/16-12
1.5/8-12
1.7/8-12
1/8
1/4
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
3/8
1/2
1/8
3/8
3/8
1/2
1/4
1/2
3/4
3/8
3/4
1/2
1
3/4
1.1/4
1
1.1/4
pipe O.D.
[mm]
[inch]
6
1/4
8
5/16
10
3/8
12
1/2
14-15-16
5/8
18-20
3/4
25
1
30-32
1.1/4
38
1.1/2
6
1/4
6
1/4
6
1/4
8
5/16
8
5/16
10
3/8
10
3/8
12
1/2
12
1/2
12
1/2
14-15-16
5/8
14-15-16
5/8
18-20
3/4
18-20
3/4
25
1
25
1
30-32
1.1/4
38
1.1/2
JIC 37
[UN-UNF]
G
[BSP]
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
7/16-20
7/16-20
7/16-20
1/2-20
1/2-20
9/16-18
9/16-18
3/4-16
3/4-16
3/4-16
7/8-14
7/8-14
1.1/16-12
1.1/16-12
1.5/16-12
1.5/16-12
1.5/8-12
1.7/8-12
1/8
1/4
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
3/8
1/2
1/8
3/8
3/8
1/2
1/4
1/2
3/4
3/8
3/4
1/2
1
3/4
1.1/4
1
1.1/4

press.
[bar]
description
Gauge fitting
350
MAV
press.
[bar]
description
Plug, female thread
450
350
290
VKA
240
press.
[bar]
description
Plug, male thread
450
350
290
ROV
240
press.
[bar]
description
Flat nut for bulkhead connectors
450
350
MP
290
240
pipe O.D.
[mm]
[inch]
code
(carbon steel)
code
(AISI 316)
JIC 37
[UN-UNF]
G
[BSP]
HJ-MAV-07-04
HJ-MAV-07-04-SS
1/4
7/16-20
1/4
HJ-MAV-08-04
HJ-MAV-08-04-SS
5/16
1/2-20
1/4
HJ-MAV-09-04
HJ-MAV-09-04-SS
10
3/8
9/16-18
1/4
HJ-MAV-12-04
HJ-MAV-12-04-SS
12
1/2
3/4-16
1/4
HJ-MAV-07-08
HJ-MAV-07-08-SS
1/4
7/16-20
1/2
HJ-MAV-08-08
HJ-MAV-08-08-SS
5/16
1/2-20
1/2
HJ-MAV-09-08
HJ-MAV-09-08-SS
10
3/8
9/16-18
1/2
HJ-MAV-12-08
HJ-MAV-12-08-SS
12
1/2
3/4-16
1/2
code
(carbon steel)
code
(AISI 316)
[mm]
HJ-VKA-07
HJ-VKA-07-SS
HJ-VKA-08
HJ-VKA-08-SS
HJ-VKA-09
HJ-VKA-09-SS
HJ-VKA-12
HJ-VKA-14
pipe O.D.
[inch]
JIC 37
[UN-UNF]
1/4
7/16-20
5/16
1/2-20
10
3/8
9/16-18
HJ-VKA-12-SS
12
1/2
3/4-16
HJ-VKA-14-SS
14-15-16
5/8
7/8-14
HJ-VKA-17
HJ-VKA-17-SS
18-20
3/4
1.1/16-12
HJ-VKA-21
HJ-VKA-21-SS
25
1.5/16-12
HJ-VKA-26
HJ-VKA-26-SS
30-32
1.1/4
1.5/8-12
HJ-VKA-30
HJ-VKA-30-SS
38
1.1/2
1.7/8-12
code
(carbon steel)
code
(AISI 316)
[mm]
[inch]
JIC 37
[UN-UNF]
7/16-20
pipe O.D.
HJ-ROV-07
HJ-ROV-07-SS
1/4
HJ-ROV-08
HJ-ROV-08-SS
5/16
1/2-20
HJ-ROV-09
HJ-ROV-09-SS
10
3/8
9/16-18
HJ-ROV-12
HJ-ROV-12-SS
12
1/2
3/4-16
HJ-ROV-14
HJ-ROV-14-SS
14-15-16
5/8
7/8-14
HJ-ROV-17
HJ-ROV-17-SS
18-20
3/4
1.1/16-12
1.5/16-12
HJ-ROV-21
HJ-ROV-21-SS
25
HJ-ROV-26
HJ-ROV-26-SS
30-32
1.1/4
1.5/8-12
HJ-ROV-30
HJ-ROV-30-SS
38
1.1/2
1.7/8-12
code
(carbon steel)
code
(AISI 316)
HJ-MP-07
HJ-MP-08
HJ-MP-09
HJ-MP-12
HJ-MP-14
HJ-MP-17
HJ-MP-21
HJ-MP-26
HJ-MP-30
pipe O.D.
[mm]
6
8
10
12
14-15-16
18-20
25
30-32
38
[inch]
1/4
5/16
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
JIC 37
[UN-UNF]
7/16-20
1/2-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
799
HIGH PRESSURE - ORFS connectors

SAE fittings - J1453 (ORFS)
ORFS (O-Ring Face Seal) connectors are used to connect rigid pipes in hydraulic applications. Pipe ends are
flared at 90 C angle. The sealing is achieved by pressing an O-ring placed in the groove of the surface front flatface of the fitting with a male thread. The ORFS fittings can also be connected with fittings of flexible hydraulic
hose assemblies (e.g. TI-ZOW110, ZOZ110).
1
3
field of force
description
press.
[bar]
Ferrule
630
420
280
630
420
280
description
Nut
press.
[bar]
630
420
280
800
pressure surfaces
sealing points
code
(carbon steel)
code
(AISI 316)
CA-400101
CA-400101-W
CA-400102
CA-400102-W
CA-400103
CA-400103-W
CA-400104
CA-400104-W
CA-400105
CA-400105-W
CA-400106
CA-400106-W
CA-400107
CA-400107-W
CA-400108
CA-400108-W
CA-400109
CA-400109-W
CA-400110
CA-400111
CA-400112
CA-400113
CA-400113-W
CA-400114
CA-400115
CA-400116
CA-410101
CA-410101-W
CA-410102
CA-410102-W
CA-410103
CA-410103-W
CA-410104
CA-410104-W
CA-410105
CA-410105-W
CA-410106
CA-410106-W
CA-410107
CA-410107-W
CA-410108
CA-410108-W
CA-410109
CA-410109-W
CA-410110
CA-410111
CA-410112
CA-410113
CA-410113-W
CA-410114
CA-410115
CA-410116
code
(carbon steel)
code
(AISI 316)
CA-400301
CA-400302
CA-400303
CA-400304
CA-400305
CA-400306
CA-400307
CA-400308
CA-410301
CA-410302
CA-410303
CA-410304
CA-410305
CA-410306
CA-410307
CA-410308
pipe O.D.
[mm]
6
10
12
16
20
25
30
38
8
14
15
18
22
28
32
35
[inch]
1/4
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
5/16
7/8
-
pipe O.D.
[mm]
6
8-10
12
14-15-16
18-20
22-25
28-30-32
35-38
[inch]
1/4
5/16-3/8
1/2
5/8
3/4
7/8-1
1.1/4
1.1/2
ORFS
[UN-UNF]
9/16-18
11/16-16
13/16-16
1-14
1.3/16-12
1.7/16-12
1.11/16-12
2-12

description
press.
[bar]
code
(carbon steel)
code
(AISI 316)
Straight nipple, BSP thread

(elastomeric seal)
630
CA-400401
CA-400402
CA-400403
CA-400404
CA-400405
CA-400406
CA-400407
CA-400408
CA-400409
CA-400410
CA-400411
CA-400412
CA-400413
CA-400414
CA-400415
CA-400416
CA-400417
CA-400418
CA-400419
CA-400420
CA-400421
CA-400422
CA-400423
CA-400424
CA-400425
CA-400426
CA-400427
CA-400428
CA-400429
CA-400430
CA-400431
CA-400432
CA-410401
CA-410402
CA-410403
CA-410404
CA-410405
CA-410406
CA-410407
CA-410408
CA-410409
CA-410410
CA-410411
CA-410412
CA-410413
CA-410414
CA-410415
CA-410416
CA-410417
CA-410418
CA-410419
CA-410420
CA-410421
CA-410422
CA-410423
CA-410424
CA-410425
CA-410426
CA-410427
CA-410428
CA-410429
CA-410430
CA-410431
CA-410432
press.
[bar]
code
(carbon steel)
code
(AISI 316)
420
CA-400901
CA-400902
CA-400903
CA-400904
CA-400905
CA-400906
CA-400907
CA-400908
CA-400909
CA-400910
CA-400911
CA-400912
CA-400913
CA-400914
CA-400915
CA-400916
CA-400917
CA-400918
CA-400919
CA-400920
CA-400921
CA-400922
CA-410901
CA-410902
CA-410903
CA-410904
CA-410905
CA-410906
CA-410907
CA-410908
CA-410909
CA-410910
CA-410911
CA-410912
CA-410913
CA-410914
CA-410915
CA-410916
CA-410917
CA-410918
CA-410919
CA-410920
CA-410921
CA-410922
420
280
630
420
630
420
280
description
Straight nipple, NPTF thread
630
420
280
630
420
280
approx. pipe O.D.

[mm]
[inch]
6
1/4
8-10
5/16-3/8
12
1/2
14-15-16
5/8
18-20
3/4
22-25
7/8-1
28-30-32
1.1/4
35-38
1.1/2
6
1/4
6
1/4
6
1/4
8-10
5/16-3/8
8-10
5/16-3/8
8-10
5/16-3/8
8-10
5/16-3/8
12
1/2
12
1/2
12
1/2
14-15-16
5/8
14-15-16
5/8
14-15-16
5/8
14-15-16
5/8
18-20
3/4
18-20
3/4
18-20
3/4
18-20
3/4
22-25
7/8-1
22-25
7/8-1
22-25
7/8-1
22-25
7/8-1
28-30-32
1.1/4
28-30-32
1.1/4
approx. pipe O.D.

[mm]
[inch]
6
1/4
8-10
5/16-3/8
12
1/2
14-15-16
5/8
18-20
3/4
22-25
7/8-1
28-30-32
1.1/4
35-38
1.1/2
6
1/4
6
1/4
8-10
5/16-3/8
8-10
5/16-3/8
12
1/2
12
1/2
12
1/2
14-15-16
5/8
14-15-16
5/8
18-20
3/4
18-20
3/4
22-25
7/8-1
28-30-32
1.1/4
35-38
1.1/2
ORFS
[UN-UNF]
G
[BSP]
9/16-18
11/16-16
13/16-16
1-14
1.3/16-12
1.7/16-12
1.11/16-12
2-12
9/16-18
9/16-18
9/16-18
11/16-16
11/16-16
11/16-16
11/16-16
13/16-16
13/16-16
13/16-16
1-14
1-14
1-14
1-14
1.3/16-12
1.3/16-12
1.3/16-12
1.3/16-12
1.7/16-12
1.7/16-12
1.7/16-12
1.7/16-12
1.11/16-12
1.11/16-12
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
3/8
1/2
1/8
3/8
1/2
3/4
1/4
1/2
3/4
1/4
3/8
3/4
1
1/4
1/2
1
1.1/4
1/4
3/4
1.1/4
1.1/2
1
1.1/2
ORFS
[UN-UNF]
P
[NPTF]
9/16-18
11/16-16
13/16-16
1-14
1.3/16-12
1.7/16-12
1.11/16-12
2-12
9/16-18
9/16-18
11/16-16
11/16-16
13/16-16
13/16-16
13/16-16
1-14
1-14
1.3/16-12
1.3/16-12
1.7/16-12
1.11/16-12
2-12
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
1/4
3/8
3/8
1/2
1/4
1/2
3/4
3/8
3/4
1/2
1
3/4
1
1.1/4
801

description
press.
[bar]
Straight nipple, UNF thread

(O-ring + washer seal)
630
420
280
630
420
630
420
280
description
Straight fitting, BSP female

thread
press.
[bar]
630
420
280
description
Straight fitting, NPTF female

thread
W
[UNF/UN-2A]
9/16-18
11/16-16
13/16-16
1-14
1.3/16-12
1.7/16-12
1.11/16-12
2-12
9/16-18
9/16-18
9/16-18
11/16-16
11/16-16
11/16-16
11/16-16
11/16-16
13/16-16
13/16-16
13/16-16
13/16-16
1-14
1-14
1.3/16-12
1.3/16-12
1.3/16-12
1.7/16-12
1.7/16-12
1.11/16-12
1.11/16-12
2-12
7/16-20
9/16-18
3/4-16
7/8-14
1.1/16-12
1.5/16-12
1.5/8-12
1.7/8-12
1/2-20
9/16-18
3/4-16
7/16-20
1/2-20
3/4-16
7/8-14
1.1/16-12
9/16-18
7/8-14
1.1/16-12
1.5/16-12
3/4-16
1.1/16-12
3/4-16
7/8-14
1.5/16-12
1.1/16-12
1.5/8-12
1.5/16-12
1.7/8-12
1.5/8-12
code
(carbon steel)
code
(AISI 316)
approx. pipe O.D.

[mm]
[inch]
ORFS
[UN-UNF]
G
[BSP]
CA-401001
CA-411001
1/4
9/16-18
1/4
code
(AISI 316)
CA-400601
CA-400602
CA-400603
CA-400604
CA-400605
CA-400606
CA-400607
CA-400608
CA-400609
CA-400610
CA-400611
CA-400612
CA-400613
CA-400614
CA-400615
CA-400616
CA-400617
CA-400618
CA-400619
CA-400620
CA-400621
CA-400622
CA-400623
CA-400624
CA-400625
CA-400626
CA-400627
CA-400628
CA-400629
CA-400630
CA-401002
CA-411002
8-10
5/16-3/8
11/16-16
1/4
CA-401003
CA-411003
12
1/2
13/16-16
3/8
CA-401004
CA-411004
14-15-16
5/8
1-14
1/2
CA-401005
CA-411005
18-20
3/4
1.3/16-12
3/4
CA-401006
CA-411006
22-25
7/8-1
1.7/16-12
CA-401007
CA-411007
28-30-32
1.1/4
1.11/16-12
1.1/4
CA-401008
CA-411008
35-38
1.1/2
2-12
1.1/2
630
CA-401009
CA-411009
12
1/2
13/16-16
1/4
420
CA-401010
CA-411010
18-20
3/4
1.3/16-12
1/2
press.
[bar]
code
(carbon steel)
code
(AISI 316)
approx. pipe O.D.

[mm]
[inch]
ORFS
[UN-UNF]
P
[NPTF]
CA-401101
CA-411101
1/4
9/16-18
1/4
630
CA-401102
CA-411102
8-10
5/16-3/8
11/16-16
1/4
CA-401103
CA-411103
12
1/2
13/16-16
3/8
CA-401104
CA-411104
14-15-16
5/8
1-14
1/2
CA-401105
CA-411105
18-20
3/4
1.3/16-12
3/4
420
280
802
ORFS
[UN-UNF]
CA-410601
CA-410602
CA-410603
CA-410604
CA-410605
CA-410606
CA-410607
CA-410608
CA-410609
CA-410610
CA-410611
CA-410612
CA-410613
CA-410614
CA-410615
CA-410616
CA-410617
CA-410618
CA-410619
CA-410620
CA-410621
CA-410622
CA-410623
CA-410624
CA-410625
CA-410626
CA-410627
CA-410628
CA-410629
CA-410630
approx. pipe O.D.

[mm]
[inch]
6
1/4
8-10
5/16-3/8
12
1/2
14-15-16
5/8
18-20
3/4
22-25
7/8-1
28-30-32
1.1/4
35-38
1.1/2
6
1/4
6
1/4
6
1/4
8-10
5/16-3/8
8-10
5/16-3/8
8-10
5/16-3/8
8-10
5/16-3/8
8-10
5/16-3/8
12
1/2
12
1/2
12
1/2
12
1/2
14-15-16
5/8
14-15-16
5/8
18-20
3/4
18-20
3/4
18-20
3/4
22-25
7/8-1
22-25
7/8-1
28-30-32
1.1/4
28-30-32
1.1/4
35-38
1.1/2
code
(carbon steel)
CA-401106
CA-411106
22-25
7/8-1
1.7/16-12
CA-401107
CA-411107
28-30-32
1.1/4
1.11/16-12
1.1/4
CA-401108
CA-411108
35-38
1.1/2
2-12
1.1/2
630
CA-401109
CA-411109
12
1/2
13/16-16
1/4
420
CA-401110
CA-411110
18-20
3/4
1.3/16-12
1/2

description
Straight connector, ORFS

male thread
press.
[bar]
630
420
280
630
420
280
description
Straight bulkhead connector,

ORFS male thread
press.
[bar]
630
code
code
(carbon st.) (AISI 316)
CA-401701
CA-401702
CA-401703
CA-401704
CA-401705
CA-401706
CA-401707
CA-401708
CA-401709
CA-401710
CA-401711
CA-401712
CA-401713
CA-401714
CA-401715
CA-401716
CA-411701
CA-411702
CA-411703
CA-411704
CA-411705
CA-411706
CA-411707
CA-411708
CA-411709
CA-411710
CA-411711
CA-411712
CA-411713
CA-411714
CA-411715
CA-411716
approx. pipe O.D.

A [inch]
B [mm]
1/4
6
5/16-3/8
8-10
1/2
12
5/8
14-15-16
3/4
18-20
7/8-1
22-25
1.1/4
28-30-32
1.1/2
35-38
5/16-3/8
6
1/2
8-10
5/8
12
3/4
8-10
3/4
12
3/4
14-15-16
7/8-1
18-20
1.1/4
22-25
A [mm]
6
8-10
12
14-15-16
18-20
22-25
28-30-32
35-38
8-10
12
14-15-16
18-20
18-20
18-20
22-25
28-30-32
B [inch]
1/4
5/16-3/8
1/2
5/8
3/4
7/8-1
1.1/4
1.1/2
1/4
3/8-5/16
1/2
3/8
1/2
5/8
3/4
7/8-1
ORFS A
[UN-UNF]
ORFS B
[UN-UNF]
9/16-18
11/16-16
13/16-16
1-14
1.3/16-12
1.7/16-12
1.11/16-12
2-12
11/16-16
13/16-16
1-14
1.3/16-12
1.3/16-12
1.3/16-12
1.7/16-12
1.11/16-12
9/16-18
11/16-16
13/16-16
1-14
1.3/16-12
1.7/16-12
1.11/16-12
2-12
9/16-18
11/16-16
13/16-16
11/16-16
13/16-16
1-14
1.3/16-12
1.7/16-12
approx. pipe O.D.

[mm]
[inch]
code
(carbon steel)
code
(AISI 316)
ORFS
[UN-UNF]
CA-401801
CA-411801
1/4
9/16-18
CA-401802
CA-411802
8-10
5/16-3/8
11/16-16
CA-401803
CA-411803
12
1/2
13/16-16
CA-401804
CA-411804
14-15-16
5/8
1-14
CA-401805
CA-411805
18-20
3/4
1.3/16-12
CA-401806
CA-411806
22-25
7/8-1
1.7/16-12
CA-401807
CA-411807
28-30-32
1.1/4
1.11/16-12
CA-401808
CA-411808
35-38
1.1/2
2-12
420
280
description
press.
[bar]
Adaptor ORFS male thread

/ DIN 2353
315
160
630
420
400
280
code
(carbon steel)
code
(AISI 316)
approx. pipe O.D.

[mm]
[inch]
series
ORFS
[UN-UNF]
M
[metric]
12x1,5
CA-402601
CA-412601
1/4
6L
9/16-18
CA-402602
CA-412602
1/4
8L
9/16-18
14x1,5
CA-402603
CA-412603
8-10
5/16-3/8
10L
11/16-16
16x1,5
CA-402604
CA-412604
12
1/2
12L
13/16-16
18x1,5
CA-402605
CA-412605
14-15-16
5/8
15L
1-14
22x1,5
CA-402606
CA-412606
18-20
3/4
18L
1.3/16-12
26x1,5
CA-402607
CA-412607
22-25
22L
1.7/16-12
30x2
CA-402608
CA-412608
28-30-32
1.1/4
28L
1.11/16-12
36x2
CA-402609
CA-412609
35-38
1.1/2
35L
2-12
45x2
CA-402610
CA-412610
35-38
1.1/2
42L
2-12
52x2
CA-402611
CA-412611
1/4
6S
9/16-18
14x1,5
CA-402612
CA-412612
1/4
8S
9/16-18
16x1,5
CA-402613
CA-412613
8-10
5/16-3/8
10S
11/16-16
18x1,5
CA-402614
CA-412614
12
1/2
12S
13/16-16
20x1,5
CA-402615
CA-412615
14-15-16
5/8
14S
1-14
22x1,5
CA-402616
CA-412616
14-15-16
5/8
16S
1-14
24x1,5
CA-402617
CA-412617
18-20
3/4
20S
1.3/16-12
30x2
CA-402618
CA-412618
22-25
7/8-1
25S
1.7/16-12
36x2
CA-402619
CA-412619
28-30-32
1.1/4
30S
1.11/16-12
42x2
CA-402620
CA-412620
35-38
1.1/2
38S
2-12
52x2
803

description
Adaptor ORFS male / BSP

60 male thread
code
(carbon steel)
CA-403101
CA-413101
400
CA-403102
CA-413102
8-10
CA-403103
CA-413103
12
1/2
1/4
9/16-18
1/8
5/16-3/8
11/16-16
1/4
13/16-16
3/8
CA-403104
CA-413104
14-15-16
5/8
1-14
1/2
CA-403105
CA-413105
18-20
3/4
1.3/16-12
3/4
250
CA-403106
CA-413106
22-25
7/8-1
1.7/16-12
200
CA-403107
CA-413107
28-30-32
1.1/4
1.11/16-12
1.1/4
CA-403108
CA-413108
35-38
1.1/2
2-12
1.1/2
CA-403109
CA-413109
1/4
9/16-18
1/4
CA-403110
CA-413110
1/4
9/16-18
3/8
CA-403111
CA-413111
8-10
5/16-3/8
11/16-16
3/8
350
CA-403112
CA-413112
8-10
5/16-3/8
11/16-16
1/2
400
CA-403113
CA-413113
12
1/2
13/16-16
1/4
350
CA-403114
CA-413114
12
1/2
13/16-16
1/2
315
CA-403115
CA-413115
12
1/2
13/16-16
3/4
400
CA-403116
CA-413116
14-15-16
5/8
1-14
3/8
350
CA-403117
CA-413117
14-15-16
5/8
1-14
5/8
315
CA-403118
CA-413118
14-15-16
5/8
1-14
3/4
350
CA-403119
CA-413119
18-20
3/4
1.3/16-12
1/2
250
CA-403120
CA-413120
18-20
3/4
1.3/16-12
315
CA-403121
CA-413121
22-25
7/8-1
1.7/16-12
3/4
200
CA-403122
CA-413122
22-25
7/8-1
1.7/16-12
1.1/4
press.
[bar]
code
(carbon steel)
code
(AISI 316)
approx. pipe O.D.

[mm]
[inch]
ORFS
[UN-UNF]
G
[BSP]
CA-403201
CA-413201
1/4
9/16-18
1/8
400
CA-403202
CA-413202
8-10
5/16-3/8
11/16-16
1/4
CA-403203
CA-413203
12
1/2
13/16-16
3/8
350
CA-403204
CA-413204
14-15-16
5/8
1-14
1/2
315
CA-403205
CA-413205
18-20
3/4
1.3/16-12
3/4
250
CA-403206
CA-413206
22-25
7/8-1
1.7/16-12
200
CA-403207
CA-413207
28-30-32
1.1/4
1.11/16-12
1.1/4
1.1/2
160
804
G
[BSP]
350
400
Adaptor ORFS female /

BSP 60 male thread
ORFS
[UN-UNF]
315
160
description
code
(AISI 316)
approx. pipe O.D.

[mm]
[inch]
press.
[bar]
CA-403208
CA-413208
35-38
1.1/2
2-12
CA-403209
CA-413209
1/4
9/16-18
1/4
400
CA-403210
CA-413210
1/4
9/16-18
3/8
CA-403211
CA-413211
8-10
5/16-3/8
11/16-16
3/8
350
CA-403212
CA-413212
8-10
5/16-3/8
11/16-16
1/2
400
CA-403213
CA-413213
12
1/2
13/16-16
1/4
350
CA-403214
CA-413214
12
1/2
13/16-16
1/2
315
CA-403215
CA-413215
12
1/2
13/16-16
3/4
400
CA-403216
CA-413216
14-15-16
5/8
1-14
3/8
350
CA-403217
CA-413217
14-15-16
5/8
1-14
5/8
315
CA-403218
CA-413218
14-15-16
5/8
1-14
3/4
350
CA-403219
CA-413219
18-20
3/4
1.3/16-12
1/2
250
CA-403220
CA-413220
18-20
3/4
1.3/16-12
315
CA-403221
CA-413221
22-25
7/8-1
1.7/16-12
3/4
200
CA-403222
CA-413222
22-25
7/8-1
1.7/16-12
1.1/4

description
Straight fitting, BSP male

thread (elastomeric seal)
press.
[bar]
630
420
280
description
Straight fitting, metric male

thread (elastomeric seal)
ORFS
[UN-UNF]
G
[BSP]
CA-403301
CA-413301
1/4
9/16-18
1/8
CA-403302
CA-413302
8-10
5/16-3/8
11/16-16
1/4
CA-403303
CA-413303
12
1/2
13/16-16
3/8
CA-403304
CA-413304
14-15-16
5/8
1-14
1/2
CA-403305
CA-413305
18-20
3/4
1.3/16-12
3/4
CA-403306
CA-413306
22-25
7/8-1
1.7/16-12
CA-403307
CA-413307
28-30-32
1.1/4
1.11/16-12
1.1/4
CA-403308
CA-413308
35-38
1.1/2
2-12
1.1/2
CA-403309
CA-413309
1/4
9/16-18
1/4
CA-403310
CA-413310
8-10
5/16-3/8
11/16-16
3/8
CA-403311
CA-413311
12
1/2
13/16-16
1/2
420
CA-403312
CA-413312
18-20
3/4
1.3/16-12
1.1/4
press.
[bar]
code
(carbon steel)
code
(AISI 316)
[mm]
[inch]
ORFS
[UN-UNF]
M
[mm]
CA-403401
CA-413401
1/4
9/16-18
12x1,5
CA-403402
CA-413402
8-10
5/16-3/8
11/16-16
14x1,5
CA-403403
CA-413403
12
1/2
13/16-16
18x1,5
CA-403404
CA-413404
14-15-16
5/8
1-14
22x1,5
CA-403405
CA-413405
18-20
3/4
1.3/16-12
27x2
CA-403406
CA-413406
22-25
7/8-1
1.7/16-12
33x2
CA-403407
CA-413407
28-30-32
11/4
1.11/16-12
42x2
CA-403408
CA-413408
35-38
11/2
2-12
48x2
CA-403409
CA-413409
1/4
9/16-18
10x1
CA-403410
CA-413410
8-10
5/16-3/8
11/16-16
16x1,5
CA-403411
CA-413411
12
1/2
13/16-16
16x1,5
630
280
350
630
420
90 elbow nipple, NPTF

thread
code
(AISI 316)
630
420
description
approx. pipe O.D.

[mm]
[inch]
code
(carbon steel)
press.
[bar]
420
630
420
280
630
420
280
approx. pipe O.D.
CA-403412
CA-413412
14-15-16
5/8
1-14
18x1,5
CA-403413
CA-413413
18-20
3/4
1.3/16-12
22x1,5
CA-403414
CA-413414
22-25
7/8-1
1.7/16-12
27x2
ORFS
[UN-UNF]
P
[NPTF]
1/8
code
(carbon steel)
code
(AISI 316)
approx. pipe O.D.

[mm]
[inch]
CA-403901
CA-413901
1/4
9/16-18
CA-403902
CA-413902
8-10
5/16-3/8
11/16-16
1/4
CA-403903
CA-413903
12
1/2
13/16-16
3/8
CA-403904
CA-413904
14-15-16
5/8
1-14
1/2
CA-403905
CA-413905
18-20
3/4
1.3/16-12
3/4
CA-403906
CA-413906
22-25
7/8-1
1.7/16-12
CA-403907
CA-413907
28-30-32
1.1/4
1.11/16-12
1.1/4
1.1/2
CA-403908
CA-413908
35-38
1.1/2
2-12
CA-403909
CA-413909
1/4
9/16-18
1/4
CA-403910
CA-413910
1/4
9/16-18
3/8
CA-403911
CA-413911
8-10
5/16-3/8
11/16-16
3/8
CA-403912
CA-413912
8-10
5/16-3/8
11/16-16
1/2
CA-403913
CA-413913
12
1/2
13/16-16
1/4
CA-403914
CA-413914
12
1/2
13/16-16
1/2
CA-403915
CA-413915
12
1/2
13/16-16
3/4
CA-403916
CA-413916
14-15-16
5/8
1-14
3/8
CA-403917
CA-413917
14-15-16
5/8
1-14
3/4
CA-403918
CA-413918
18-20
3/4
1.3/16-12
1/2
CA-403919
CA-413919
18-20
3/4
1.3/16-12
CA-403920
CA-413920
22-25
7/8-1
1.7/16-12
3/4
CA-403921
CA-413921
28-30-32
1.1/4
1.11/16-12
CA-403922
CA-413922
35-38
1.1/2
2-12
1.1/4
805

description

BSP thread
press.
[bar]
ORFS
[UN-UNF]
G
[BSP]
1/8
CA-405101
CA-415101
1/4
9/16-18
CA-405102
CA-415102
8-10
5/16-3/8
11/16-16
1/4
CA-405103
CA-415103
12
1/2
13/16-16
3/8
250
CA-405104
CA-415104
14-15-16
5/8
1-14
1/2
CA-405105
CA-415105
18-20
3/4
1.3/16-12
3/4
CA-405106
CA-415106
22-25
7/8-1
1.7/16-12
CA-405107
CA-415107
28-30-32
1.1/4
1.11/16-12
1.1/4
160
CA-405108
CA-415108
35-38
1.1/2
2-12
1.1/2
315
CA-405109
CA-415109
1/4
9/16-18
1/4
CA-405110
CA-415110
1/4
9/16-18
3/8
CA-4051.11
CA-4151.11
8-10
5/16-3/8
11/16-16
3/8
CA-405112
CA-415112
8-10
5/16-3/8
11/16-16
1/2
CA-405113
CA-415113
12
1/2
13/16-16
1/4
315
CA-405114
CA-415114
12
1/2
13/16-16
1/2
CA-405115
CA-415115
12
1/2
13/16-16
3/4
CA-405116
CA-415116
14-15-16
5/8
1-14
1/4
CA-405117
CA-415117
14-15-16
5/8
1-14
3/8
CA-405118
CA-415118
14-15-16
5/8
1-14
3/4
200
CA-405119
CA-415119
14-15-16
5/8
1-14
315
CA-405120
CA-415120
18-20
3/4
1.3/16-12
1/4
250
CA-405121
CA-415121
18-20
3/4
1.3/16-12
1/2
200
CA-405122
CA-415122
18-20
3/4
1.3/16-12
315
CA-405123
CA-415123
22-25
7/8-1
1.7/16-12
1/4
250
CA-405124
CA-415124
22-25
7/8-1
1.7/16-12
3/4
CA-405125
CA-415125
22-25
7/8-1
1.7/16-12
1.1/4
250
315
250
200
CA-405126
CA-415126
28-30-32
1.1/4
1.11/16-12
160
CA-405127
CA-415127
28-30-32
1.1/4
1.11/16-12
1.1/2
press.
[bar]
code
(carbon steel)
code
(AISI 316)
approx. pipe O.D.

[mm]
[inch]
ORFS
[UN-UNF]
M
[metric]
CA-405201
CA-415201
1/4
9/16-18
M12x1,5
315
CA-405202
CA-415202
8-10
5/16-3/8
11/16-16
M14x1,5
CA-405203
CA-415203
12
1/2
13/16-16
M18x1.5
CA-405204
CA-415204
14-15-16
5/8
1-14
M22x1.5
CA-405205
CA-415205
18-20
3/4
1.3/16-12
M27x2
CA-405206
CA-415206
22-25
7/8-1
1.7/16-12
M33x2
CA-405207
CA-415207
28-30-32
1.1/4
1.11/16-12
M42x2
CA-405208
CA-415208
35-38
1.1/2
2-12
M48x2
CA-405209
CA-415209
1/4
9/16-18
M10x1
CA-405210
CA-415210
8-10
5/16-3/8
11/16-16
M16x1,5
CA-405211
CA-415211
12
1/2
13/16-16
M16x1,5
250
160
315
250
CA-405212
CA-415212
12
1/2
13/16-16
M22x1.5
315
CA-405213
CA-415213
14-15-16
5/8
1-14
M18x1.5
CA-405214
CA-415214
14-15-16
5/8
1-14
M27x2
CA-405215
CA-415215
18-20
3/4
1.3/16-12
M22x1.5
160
CA-405216
CA-415216
18-20
3/4
1.3/16-12
M33x2
250
CA-405217
CA-415217
22-25
7/8-1
1.7/16-12
M27x2
CA-405218
CA-415218
22-25
7/8-1
1.7/16-12
M42x2
CA-405219
CA-415219
28-30-32
1.1/4
1.11/16-12
M48x2
250
160
806
approx. pipe O.D.

[mm]
[inch]
350
250

metric thread
code
(AISI 316)
315
200
description
code
(carbon steel)

description

UNF thread
(O-ring seal)
press.
[bar]
420
380
280
420
code
(AISI 316)
approx. pipe O.D.

[mm]
[inch]
ORFS
[UN-UNF]
W
[UNF]
CA-405301
CA-415301
1/4
9/16-18
7/16-20
CA-405302
CA-415302
8-10
5/16-3/8
11/16-16
9/16-18
CA-405303
CA-415303
12
1/2
13/16-16
3/4-16
CA-405304
CA-415304
14-15-16
5/8
1-14
7/8-14
CA-405305
CA-415305
18-20
3/4
1.3/16-12
1.1/16-12
CA-405306
CA-415306
22-25
7/8-1
1.7/16-11
1.5/16-12
CA-405307
CA-415307
28-30-32
1.1/4
1.11/16-12
1.5/8-12
CA-405308
CA-415308
35-38
1.1/2
2-12
1.7/8-12
CA-405309
CA-415309
1/4
9/16-18
9/16-18
CA-405310
CA-415310
1/4
9/16-18
3/4-16
CA-405311
CA-415311
8-10
5/16-3/8
11/16-16
7/16-20
CA-405312
CA-415312
8-10
5/16-3/8
11/16-16
3/4-16
CA-405313
CA-415313
8-10
5/16-3/8
11/16-16
7/8-14
CA-405314
CA-415314
8-10
5/16-3/8
11/16-16
1.1/16-12
9/16-18
CA-405315
CA-415315
12
1/2
13/16-16
CA-405316
CA-415316
12
1/2
13/16-16
7/8-14
CA-405317
CA-415317
12
1/2
13/16-16
1.1/16-12
CA-405318
CA-415318
14-15-16
5/8
1-14
3/4-16
CA-405319
CA-415319
14-15-16
5/8
1-14
1.1/16-12
CA-405320
CA-415320
18-20
3/4
1.3/16
3/4-16
CA-405321
CA-415321
18-20
3/4
1.3/16
7/8-14
380
CA-405322
CA-415322
18-20
3/4
1.3/16
1.5/16-12
420
CA-405323
CA-415323
22-25
7/8-1
1.7/16
1.1/16-12
CA-405324
CA-415324
22-25
7/8-1
1.7/16
1.5/8-12
CA-405325
CA-415325
28-30-32
1.1/4
1.11/16
1.5/16-12
CA-405326
CA-415326
28-30-32
1.1/4
1.11/16
1.7/8-12
CA-405327
CA-415327
35-38
1.1/2
2-12
1.5/8-12
code
(carbon steel)
code
(AISI 316)
CA-404901
CA-414901
1/4
9/16-18
CA-404902
CA-414902
8-10
5/16-3/8
11/16-16
CA-404903
CA-414903
12
1/2
13/16-16
CA-404904
CA-414904
14-15-16
5/8
1-14
CA-404905
CA-414905
18-20
3/4
1.3/16-12
CA-404906
CA-414906
22-25
7/8-1
1.7/16-12
CA-404907
CA-414907
28-30-32
1.1/4
1.11/16-12
CA-404908
CA-414908
35-38
1.1/2
2-12
280
description
code
(carbon steel)
press.
[bar]
Tee ORFS connector

630
420
280
approx. pipe O.D.

[mm]
[inch]
ORFS
[UN-UNF]
807

description
Tee adaptor L type ORFS

male thread / female thread
press.
[bar]
630
420
approx. pipe O.D.

[mm]
[inch]
code
(carbon steel)
code
(AISI 316)
ORFS
[UN-UNF]
CA-407401
CA-417401
1/4
9/16-18
CA-407402
CA-417402
8-10
5/16-3/8
11/16-16
CA-407403
CA-417403
12
1/2
13/16-16
CA-407404
CA-417404
14-15-16
5/8
1-14
CA-407405
CA-417405
18-20
3/4
1.3/16-12
CA-407406
CA-417406
22-25
7/8-1
1.7/16-12
CA-407407
CA-417407
28-30-32
1.1/4
1.11/16-12
CA-407408
CA-417408
35-38
1.1/2
2-12
code
(carbon steel)
code
(AISI 316)
approx. pipe O.D.

[mm]
[inch]
CA-407601
CA-417601
1/4
CA-407602
CA-417602
8-10
5/16-3/8
11/16-16
CA-407603
CA-417603
12
1/2
13/16-16
280
description
Plug, ORFS, female thread
press.
[bar]
630
420
280
description
Plug, ORFS, male thread
press.
[bar]
630
420
280
description
Nut, UNF thread, for bulkhead connectors
press.
[bar]
630
420
280
808
ORFS
[UN-UNF]
9/16-18
CA-407604
CA-417604
14-15-16
5/8
1-14
CA-407605
CA-417605
18-20
3/4
1.3/16-12
CA-407606
CA-417606
22-25
7/8-1
1.7/16-12
CA-407607
CA-417607
28-30-32
1.1/4
1.11/16-12
CA-407608
CA-417608
35-38
1.1/2
2-12
code
(carbon steel)
code
(AISI 316)
approx. pipe O.D.

[mm]
[inch]
CA-407701
CA-417701
1/4
9/16-18
CA-407702
CA-417702
8-10
5/16-3/8
11/16-16
ORFS
[UN-UNF]
CA-407703
CA-417703
12
1/2
13/16-16
CA-407704
CA-417704
14-15-16
5/8
1-14
CA-407705
CA-417705
18-20
3/4
1.3/16-12
CA-407706
CA-417706
22-25
7/8-1
1.7/16-12
CA-407707
CA-417707
28-30-32
1.1/4
1.11/16-12
CA-407708
CA-417708
35-38
1.1/2
2-12
code
(carbon steel)
code
(AISI 316)
approx. pipe O.D.

[mm]
[inch]
CA-407801
CA-417801
1/4
9/16-18
CA-407802
CA-417802
8-10
5/16-3/8
11/16-16
13/16-16
ORFS
[UN-UNF]
CA-407803
CA-417803
12
1/2
CA-407804
CA-417804
14-15-16
5/8
1-14
CA-407805
CA-417805
18-20
3/4
1.3/16-12
CA-407806
CA-417806
22-25
7/8-1
1.7/16-12
CA-407807
CA-417807
28-30-32
1.1/4
1.11/16-12
CA-407808
CA-417808
35-38
1.1/2
2-12
HIGH PRESSURE - quick release couplings

Quick release couplings solve the problem of quick connection and disconnection of flexible hose assemblies. The
connection can be made faster and easier than in the case of standard screwed couplings (threaded, flanged)
because it is made by hand, with no tools. Usually, it requires only pushing a plug into a socket. Locking occurs
automatically, using the spring mechanism.
The most often the plug is blocked in the socket with steel balls. In many cases connection and disconnection can
be made with one hand only (one hand operation).
The use of quick release couplings facilities assembly. It enables fast and easy replacement of interchangeable
modules of hydraulic systems, saving time and money.
Construction - basic elements (illustrated by the example of ISO-B quick release double shut-off coupling)
Socket:
1 - body
2 - blocking mechanism (sleeve, spring, steel balls)
3 - seal (O-ring, stopper ring)
4 - valve (valve head, spring, valve holder)
5 - valve seal (O-ring)
Plug:
6 - body
7 - valve (valve head, spring, valve holder)
8 - valve seal (O-ring)
Types of quick release couplings

straight-through
single shut-off
double shut-off
double shut-off,
dry-break (leak-free)
no valves
valve only on supply side

(most often in socket)
valves on both socket

and plug side
valves on both socket and plug side,

(flat surface face - flat face
and appropriate sealing
Standards
Quick release couplings are manufactured according to generally acknowledged standards or according to the
manufacturers standards. The most common in hydraulics:
- ISO 7241-1 A (ISO-A)
- ISO 7241-1 B (ISO-B)
- ISO 16028 (ISO-F)
Standards define the dimensional requirements for sockets and plugs, strength requirements (working pressure,
bursting pressure) and others (flow rate, connection strength, spillage volume, etc.). Dimensional requirements
deal with a plug profile in particular (shape and dimensions). Manufacturing according to the same profile standard ensures so called interchangeability and allows connection of sockets and plugs from different producers.
However, this connection does not guarantee all functional features of an original set of couplers (socket and plug
from the same manufacturer) and should be properly verified.
809

Plug profiles
(according to international and producers standards: NORDIC RANGE, TEMA STANDARD, CEJN 525)
dimensions [mm]
size
[inch]
ISO-A
A
11,8
17,25
20,5
29,05
34,3
44,95
54,95
65,05
3/16
1/4
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
ISO-B
B
5,6
8,9
9,3
16
19,85
25
30,7
35,1
A
10,85
14,15
19,05
23,5
31,4
37,75
44,45
63,2
ISO-F
B
7,9
9,65
12,45
12,2
18,8
20,6
32,6
38,1
A
16,15
19,7
24,5
27
29,9
36
-
B
5,75
4,75
9,85
9,85
11,4
10,9
-
NORDIC RANGE
A
B
9,3
6,8
11,9
11,8
19,9
13,7
24,6
15
32,7
18,5
41
21,5
-
Material and sealing

The components of quick release couplings are usually made of steel, brass, stainless steel. The choice of proper
material is vital for:
- quick release coupling resistance under pressure (also resistance to pulsating pressure and vibrations).
- mechanical wear of the plug and movable components when influenced by friction, resistance to mechanical
impact.
- internal corrosion resistance to the medium.
- external corrosion resistance to operation conditions.
In order to obtain properties adequate for certain application, the body of the socket is made of zinc-plated steel,
brass (chrome-plated, nickel-plated), or stainless steel. The body of the plug is made of hardened zinc-plated
steel, brass or stainless steel, valves made of brass or zinc alloys, balls and springs of appropriate stainless steel.
The O-rings of quick release coupling are made of various elastomeric materials. NBR is a basic material used in
hydraulic systems. A socket-plug seal has an additional stopper ring made of PTFE. Quick release couplings of
Nordic Range have a double seal (two O-rings) that increases the durability of the sealing.
material
working temp.
characteristics and use of seals
NBR
(nitrile)
from -40C
up to +100C
Basic seal for hydraulics. Resistant to hydraulic oil, mineral oil, fuel (but not biodiesel),
water up to +80 C, glycol, grease, compressed air up to +70 C, methane, propane,
butane, ethanol and methanol.
Viton
(FPM / FKM)
from -25C
up to +200C
Excellent resistance to high temperature, oils, greases, aromatic substances. Resistant to most chemicals. Can be used for steam up to +150 C.
EPDM
from -40C
up to +150C
Good resistance to high temperatures. Especially recommended for hot water and
steam. Good resistance to brake fluids, glycol and fire resistant hydraulic fluids. Resistant to many of the non-aggressive chemicals. Not suitable for mineral oils and
gasoline.
PUR
(polyurethane)
from -40C
up to +100C
Compared to NBR, more resistant to pressure pulsation, but more sensitive to dirt.
Mainly used for hydraulic oil.
810

medium
NBR
seal material
Viton
oils (hydraulic oil, motor oil, grease)
fuels (diesel oil, fuel oil)
gases
quick release coupling material

steel
SS
brass
EPDM
contact TUBES INTERNATIONAL
steam (up to +150C)
water (up to +80C)

water (over +80C)
- recommended
X
- conditional use
X - not recommended
If a quick release coupling is used for a medium other than hydraulic oil, always contact
TUBES INTERNATIONAL for the proper seal selection!
Working pressure
The working pressure of a quick release coupling is its maximum working pressure (including temporary pressure
build-up), above which the coupling must not operate. The safety factor is the relation of bursting pressure to the
maximum working pressure. In the hydraulic systems the safety factor should be 4 : 1. The value of bursting pressure, working pressure and safety factor should be defined for both connected and disconnected quick release
coupling (closed valves). For the disconnected quick release couplings these values are usually lower.
Pressure eliminator
The application of a socket or a plug with a pressure eliminator facilities connection of quick release couplings when
residual pressure in the system is high. The eliminator, a tiny release valve with two small holes, is built into the
socket or plug. Once the quick release coupling is connected, release valve opens, the medium flows out through
the holes causing the drop of the static pressure.
socket and plug without eliminator
valve without eliminator
socket and plug with eliminator
valve with eliminator

valve
holes
811

Flow
A quick release coupling, the one with a valve in particular, causes pressure loss in an installation transferring
fluid. The higher the flow rate Q (measured in l/min) through a quick release coupling (and so fluid velocity), the
bigger the pressure loss p (measured in bars), which is the difference of pressure value in the installation in front
of and behind the quick release coupling. Experimentally obtained charts of pressure loss for different flow rates
are prepared for each type and size of the quick release couplings. For hydraulic quick release couplings the tests
are performed with hydraulic oil of approximately 32 cSt viscosity at ambient temperature. The charts of pressure
loss p or flow rate Q through the quick release coupling with specified pressure drop (e.g. 1 bar, 2 bar, 4 bar) are
provided in the coupling description. The comparison of flow rates is only acceptable when the flow rates of quick
release couplings are compared at the same value of pressure drop.
Protection against accidental disconnection

Disconnection of standard quick release couplings requires backward pull of the plug-locking sleeve in the socket.
To prevent accidental disconnection, some of the quick release couplings are equipped with locking sleeve security
mechanism preventing backward pull and accidental disconnection.
This feature is implemented by an additional safety locking ring (which needs to be moved in the direction of
sleeve and turned) or security pin (safety lock- turning of the sleeve is only possible in a proper position of a cut
in the sleeve).
safety locking ring
ring
locking pin
pin
quick release coupling unlocked
quick release coupling unlocked
quick release coupling locked
quick release coupling locked
Air inclusion
When a quick release coupling is connected (disconnected), air inclusion follows to the inside of the installation.
This causes disturbances in the system, for example unsynchronised operation of actuators. The amount of air
that gets into the system depends on the shape of valves faces. The larger the space between the valves during
the connection of a plug with a socket, the more air gets into the system. The smallest air inclusion is specific to
flat-face quick release couplings.
812

Push-pull system
The application of push-pull quick release couplings protects flexible hose assemblies from tearing apart in case
of accidental strain (e.g. a tractor drives away from a seeder - a mechanical coupler has already been unhooked
but hydraulic installation is still connected). The push-pull system works properly only if the socket is fixed to the
body of equipment (housing) with a knurled locking sleeve (see picture below). When the hose assembly is strained,
automatic disconnection of the quick release coupling follows. This prevents damage of the hydraulic installation
and possible oil loss. There is also a type of quick release couplings with emergency breakaway function.
One hand operation - connection and disconnection with one hand

To connect standard quick release coupling, locking sleeve must be pulled back and the plug must be pushed into
the socket. In order to increase the ease of handling, some of the quick release couplings are connected (disconnected) with one hand. The connection takes place automatically after only pushing the plug into the socket. In
order to disconnect such a coupling, the locking sleeve must be pulled back and the plug will pop out.
One hand operation
Standard
Leakage
When connecting (disconnecting) a quick release coupling, leakage of medium occurs. The volume of the leakage
depends on the shape of a valve face. It ranges from a fraction of millilitre for flat-face quick release couplings
to a dozen of millilitres for big poppet-type quick release couplings.
813

Failure-free operation - protection against contamination
Hydraulic hose assemblies equipped with quick release couplings are often disconnected for longer periods of
time. It often happens e.g. in construction, road and agricultural equipment. The application of blank plugs/caps
for sockets and plugs protects quick release couplings against contamination and ensures failure-free operation.
Lubricators (lubricating blank plugs) enable operation in the conditions of high contamination and in winter - prevent
freezing of quick release couplings
Blank caps
Lubricating blank plugs
Assembly of quick release couplings

Assembly of a quick release coupling depends on the type of a socket and a plug as well as construction of high
pressure system in which quick release coupling is to work. As a standard, plugs are mounted on flexible hose
assemblies while the sockets are attached to the body of a machine or equipment.
sealing method
example
TI-ZMW121-22-08
HD-GE-15L-BE-08X
HQ-IA12-M-08G
using connectors
HQ-IA12-M-15L
TI-ZMW121-22-08
on 24 cone
TI-ZBZ110-08-08
TI-UDB-08
HQ-IA12-M-08G
UG-TAPE-12
HQ-IA12-M-08G
using metal-rubber seal
TI-ZBZ130-08-08
sealing on a thread
(PTFE tape or anaerobic sealant)
814

Couplings according to ISO-A standard
DNP, HQ (1/4 2)
Standard:
Applications:
Working press.:
Material:
Seal:
Advantages:
ISO 7241-1 A
Hydraulics (hydraulic oil)
Up to 350 bar (safety factor: 4:1)
Galvanized steel
NBR (from -20C up to +100C)
Inexpensive quick release couplings
Quick release couplings widely used in agricultural machines. Sockets are available in a standard and push-pull
type (automatic disconnection in case of accidental strain of a hose assembly). Commonly known as euro quick
release couplings. Interchangeable with ISO-A quick release couplings of different producers.
Socket STANDARD type
Plug STANDARD type
Plug STANDARD (DIN 2353)
size
[inch]
thread size
[inch]
1/4
1/4" BSP fem.
code
DNP
DP-PAV1-0606002
HQ
HQ-IA06-F-04G
3/8
3/8 BSP fem.
DP-PAV1-1010002
HQ-IA10-F-06G
1/2
1/2" BSP fem.
DP-PAV1-1313002
HQ-IA12-F-08G
3/4
3/4" BSP fem.
DP-PAV1-2019002
HQ-IA19-F-12G
1 BSP fem.
DP-PAV1-2525002
HQ-IA25-F-16G
1.1/4
1.1/4 BSP fem.
DP-PAV1-3031002
HQ-IA32-F-20G
1.1/2
1.1/2 BSP fem.
DP-PAV1-3939002
HQ-IA40-F-24G
2 BSP fem.
DP-PAV1-5051002
HQ-IA50-F-32G
size
[inch]
thread size
[inch]
1/4
3/8
code
1/4" BSP fem.
DNP
DP-PAV1-0606003
HQ
HQ-IA06-M-04G
3/8 BSP fem.
DP-PAV1-1010003
HQ-IA10-M-06G
1/2
1/2" BSP fem.
DP-PAV1-1313003
HQ-IA12-M-08G
3/4
3/4" BSP fem.
DP-PAV1-2019003
HQ-IA19-M-12G
1 BSP fem.
DP-PAV1-2525003
HQ-IA25-M-16G
1.1/4
1.1/4 BSP fem.
DP-PAV1-3031003
HQ-IA32-M-20G
1.1/2
1.1/2 BSP fem.
DP-PAV1-3939003
HQ-IA40-M-24G
2 BSP fem.
DP-PAV1-5051003
HQ-IA50-M-32G
size
[inch]
thread size
[mm]
DNP
HQ
M18x1.5 male
(12L)
DP-PPV3-1318303
HQ-IA12-M-12L
M22x1.5 male
(15L)
DP-PPV3-1322303
HQ-IA12-M-15L
code
1/2
815

Couplings according to ISO-A standard
size
[inch]
Socket PUSH PULL type
1/2
thread size
code
DNP
HQ
1/2 BSP
female
DP-PPV1-1313002
HQ-IA12P-F-08G
M18x1.5 male
(12L)
DP-PPV3-1318302
HQ-IA12P-F-12L
M22x1.5 male
(15L)
DP-PPV3-1322302
HQ-IA12P-F-15L
M22x1.5 male
(15L)*
DP-PPV3-1322502
HQ-IA12P-F-15L-B
* - socket version for panel mounting

size
[inch]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
Socket blank plug
size
[inch]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
Plug blank cap
material
PVC or PE
aluminium
material
PVC or PE
aluminium
code
DNP
DP-SPAV-06002
DP-SPAV-10002
DP-SPAV-13002
DP-SPAV-20002
DP-SPAV-25002
DP-SPAV-30202
DP-SPAV-39202
DP-SPAV-50202
HQ
HQ-IA06-F-RED
HQ-IA10-F-RED
HQ-IA12-F-RED
HQ-IA19-F-RED
HQ-IA25-F-RED
code
DNP
DP-SPAV-06003
DP-SPAV-10003
DP-SPAV-13003
DP-SPAV-20003
DP-SPAV-25003
DP-SPAV-30203
DP-SPAV-39203
DP-SPAV-50203
HQ
HQ-IA06-M-RED
HQ-IA10-M-RED
HQ-IA12-M-RED
HQ-IA19-M-RED
HQ-IA25-M-RED
-
Operating parameters
size
[inch]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
816
working pressure
[bar]
DNP
350
350
250
250
200
200
190
160
HQ
350
300
250
250
230
230
190
130
flow rate at p = 3 bar

[l/min]
DNP
HQ
15
12
55
39
73
88
152
156
226
280
413
620
582
885
1174
1375

Couplings according to ISO-B standard
HANSEN (3/16 1)
Standard:
Applications:
ISO 7241-1 B (except size 3/16)

Hydraulics (hydraulic oil),
Industrial (water, steam, fuel, oil,
gas and chemicals)
Working press.: Up to 345 bar (safety factor: 4:1)
Material:
Brass, galvanized steel, stainless steel
Seal:
NBR (from -20C up to +100C) - standard
Viton (from -20C up to +200C) - option
EPDM (from -40C up to +150C) - option
Advantages:
Increased resistance to pulsating pressure
Quick release couplings available from 1/2 to 1 made of special hardened steel which ensures increased resistance to pulsating pressure. Depending on application, the material of a quick release coupling and seal must
be chosen. Interchangeable with ISO-B quick release couplings of different producers. For pulsating pressure in
disconnected couplings, the maximum working pressure must be reduced by 50%.
Socket
size
[inch]
3/16
1/4
3/8
1/2
3/4
1
Plug
size
[inch]
3/16
1/4
3/8
1/2
3/4
1
Blank plugs/caps
female
thread
[inch]
1/8" NPT
1/4" BSP
1/4" NPT
3/8 BSP
3/8 NPT
1/2" BSP
1/2" NPT
3/4" BSP
3/4" NPT
1 BSP
1 NPT
female
thread
[inch]
1/8" NPT
1/4" BSP
1/4" NPT
3/8 BSP
3/8 NPT
1/2" BSP
1/2" NPT
3/4" BSP
3/4" NPT
1 BSP
1 NPT
code
brass
HA-B1H11
HA-B2H16BS
HA-B2H16
HA-B3H21BS
HA-B3H21
HA-B4HP26BS
HA-B4HP26
HA-B6HP31BS
HA-B6HP31
HA-B8HP36BS
HA-B8HP36
galvanized steel
HA-1H11
HA-2H16BS
HA-2H16
HA-3H21BS
HA-3H21
HA-4HP26BS
HA-4HP26
HA-6HP31BS
HA-6HP31
HA-8HP36BS
HA-8HP36
AISI 303
HA-LL1H11
HA-LL2H16BS
HA-LL2H16
HA-LL3H21BS
HA-LL3H21
HA-LL4HP26BS
HA-LL4HP26
HA-LL6HP31BS
HA-LL6HP31
HA-LL8HP36BS
HA-LL8HP36
AISI 316
HA-ML1H11
HA-ML2H16BS
HA-ML2H16
HA-ML3H21BS
HA-ML3H21
HA-ML4HP26BS
HA-ML4HP26
HA-ML6HP31BS
HA-ML6HP31
HA-ML8HP36BS
HA-ML8HP36
code
brass
HA-B1K11
HA-B2K16BS
HA-B2K16
HA-B3K21BS
HA-B3K21
HA-B4KP26BS
HA-B4KP26
HA-B6KP31BS
HA-B6KP31
HA-B8KP36BS
HA-B8KP36
size
[inch]
material
3/16
1/4
3/8
1/2
3/4
1
PVC
galvanized steel
HA-1K11
HA-2K16BS
HA-2K16
HA-3K21BS
HA-3K21
HA-4KP26BS
HA-4KP26
HA-6KP31BS
HA-6KP31
HA-8KP36BS
HA-8KP36
AISI 303
HA-LL1K11
HA-LL2K16BS
HA-LL2K16
HA-LL3K21BS
HA-LL3K21
HA-LL4KP26BS
HA-LL4KP26
HA-LL6KP31BS
HA-LL6KP31
HA-LL8KP36BS
HA-LL8KP36
AISI 316
HA-ML1K11
HA-ML2K16BS
HA-ML2K16
HA-ML3K21BS
HA-ML3K21
HA-ML4KP26BS
HA-ML4KP26
HA-ML6KP31BS
HA-ML6KP31
HA-ML8KP36BS
HA-ML8KP36
code
socket blank plug
HA-PSDC1HK
HA-PSDC2HK
HA-PSDC3HK
HA-PSDC4HK
HA-PSDC6HK
HA-PSDC8HK
plug blank cap

HA-PPDC1HK
HA-PPDC2HK
HA-PPDC3HK
HA-PPDC4HK
HA-PPDC6HK
HA-PPDC8HK
817

HANSEN (1.1/4 2)
Standard:
Applications:
ISO 7241-1 B (except size- 1.1/4)

gas and chemicals).
Material:
Seal:
Advantages:
According to: 97/23/WE: module D1
Quick release couplings designed and manufactured according to PED (Pressure Equipment Directive) 97/23/
WE: Module D1. Depending on application, the material and seal of a quick release coupling must be chosen.
Interchangeable with ISO-B quick release couplings of different producers. For pulsating pressure in disconnected
couplings, the maximum working pressure must be reduced by 50%.
size
[inch]
Socket
1.1/4
1.1/2
2
size
[inch]
Plug
1.1/4
1.1/2
2
size
[inch]
Blank plug/cap
female
thread
[inch]
1.1/4" BSP
1.1/4" NPT
1.1/2 BSP
1.1/2 NPT
2" BSP
2" NPT
brass
HA-B10H41BS
HA-B10H41
HA-B12H46BS
HA-B12H46
HA-B20H51BS
HA-B20H51
galvanized steel
HA-10H41BS
HA-10H41
HA-12H46BS
HA-12H46
HA-20H51BS
HA-20H51
female
thread
[inch]
1.1/4" BSP
1.1/4" NPT
1.1/2 BSP
1.1/2 NPT
2" BSP
2" NPT
brass
HA-B10K41BS
HA-B10K41
HA-B12K46BS
HA-B12K46
HA-B20K51BS
HA-B20K51
galvanized steel
HA-10K41BS
HA-10K41
HA-12K46BS
HA-12K46
HA-20K51BS
HA-20K51
code
AISI 303
HA-LL10H41BS
HA-LL10H41
HA-LL12H46BS
HA-LL12H46
HA-LL20H51BS
HA-LL20H51
code
material
1.1/2"
AISI 303
HA-LL10K41BS
HA-LL10K41
HA-LL12K46BS
HA-LL12K46
HA-LL20K51BS
HA-LL20K51
code
socket blank plug
plug blank cap
HA-SDC12HK
HA-PDC12HK
HA-SDC20HK
HA-PDC20HK
aluminium
2"
size
[inch]
3/16
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2

brass
200
185
150
155
140
100
80 (37)*
100 (29)*
50 (27)*
* - maximum working pressure for hazardous fluids
818
galvanized steel
275
255
255
345
275
275
120 (37)*
150 (29)*
100 (27)*
stainless steel
345
255
255
290
240
170
120 (37)*
150 (29)*
100 (27)*

[l/min]
13
29
50
84
188
272
442
631
1314

TEMA (1/4 1)
Standard:
Applications:
ISO 7241-1 B
gas and chemicals)
Material:
Chrome-plated brass (socket up to: 1/2)
galvanized steel (other items)
Seal:
Viton (from -25C up to +200C)
Advantages:
double O-ring seal - perfect for gases
Quick release couplings (except 1/4 size) equipped with additional double O-ring seal are ideal for gas installations. Both a socket and a plug are also available with a static pressure eliminator. Depending on application, the
material and seal of a quick release coupling must be chosen. Interchangeable with ISO-B quick release couplings
of different producers.
picture
Socket
size
[inch]
description
with a valve
1/4
with a valve
and an eliminator
with a valve
3/8
with a valve
and an eliminator
with a valve
1/2
Plug
with a valve
and an eliminator
with a valve
3/4
with a valve
and an eliminator
with a valve
Blank plugs/caps
with a valve
and an eliminator
size
[inch]
material
female
thread
[inch]
1/4
3/8
1/2
3/4
seal
socket code
plug code
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
TA-H-IB2510
TA-H-IB2510V
TA-H-IB2511
TA-H-IB2511V
TA-H-IB3810
TA-H-IB3810V
TA-H-IB3811
TA-H-IB3811V
TA-H-IB5010
TA-H-IB5010V
TA-H-IB5011
TA-H-IB5011V
TA-H-IB7510
TA-H-IB7510V
TA-H-IB7511
TA-H-IB7511V
TA-H-IB10010
TA-H-IB10010V
TA-H-IB10011
TA-H-IB10011V
TA-H-IB2520
TA-H-IB2520V
TA-H-IB2521
TA-H-IB2521V
TA-H-IB3820
TA-H-IB3820V
TA-H-IB3821
TA-H-IB3821V
TA-H-IB5020
TA-H-IB5020V
TA-H-IB5021
TA-H-IB5021V
TA-H-IB7520
TA-H-IB7520V
TA-H-IB7521
TA-H-IB7521V
TA-H-IB10020
TA-H-IB10020V
TA-H-IB10021
TA-H-IB10021V
code
socket blank plug
TA-H-IB2516
plug blank cap

TA-H-IB2526
TA-H-IB3816
TA-H-IB3826
TA-H-IB5016
TA-H-IB5026
3/4
TA-H-IB7516
TA-H-IB7526
TA-H-IB10016
TA-H-IB10026
1/4
3/8
1/2
PVC
size
[inch]
working pressure
(coupling connected / disconnected)
[bar]

[l/min]
1/4
3/8
1/2
3/4
1
400 / 280
320 / 320
300 / 250
300 / 235
300 / 235
21
56
107
208
292
819

PERFECTING (3/16 1.1/2)
Standard:
Applications:
ISO 7241-1 B (except sizes: 3/16 and 1.1/4)

gas and chemicals)
Material:
Seal:
Advantages:
Double O-ring seal
The socket of a quick release couplings made of brass and stainless steel in sizes above 1 is equipped with a
second O-ring instead of a stopper ring. It ensures better sealing. Interchangeable with ISO-B quick release couplings of different producers. Available in 316 steel or with blank caps.
Socket
size
[inch]
female thread
[inch]
3/16
1/8" NPTF
1/4" BSP
1/4" NPTF
3/8 BSP
3/8 NPTF
1/2" BSP
1/2" NPTF
3/4" BSP
3/4" NPTF
1 BSP
1 NPTF
1.1/4 BSP
1.1/4 NPT
1.1/2 BSP
1.1/2 NPT
1/4
3/8
1/2
(from 3/16 up to 1)
3/4
1
1.1/4
(from 1.1/4 up to 1.1/2)
Plug
1.1/2
size
[inch]
female thread
[inch]
3/16
1/8" NPTF
1/4" BSP
1/4" NPTF
3/8 BSP
3/8 NPTF
1/2" BSP
1/2" NPTF
3/4" BSP
3/4" NPTF
1 BSP
1 NPTF
1.1/4 BSP
1.1/4 NPT
1.1/2 BSP
1.1/2 NPT
1/4
3/8
(from 3/16 up to 1)
1/2
3/4
1
1.1/4
(from 1.1/4 up to 1.1/2)
1.1/2
code
brass
PC-1HF1-B
PC-2HBF2-B
PC-2HF2-B
PC-3HBF3-B
PC-3HF3-B
PC-4HBF4-B
PC-4HF4-B
PC-6HBF6-B
PC-6HF6-B
PC-8HBF8-B
PC-8HF8-B
PC-10HBF10-B
PC-10HF10-B
PC-12HBF12-B
PC-12HF12-B
galvanized steel
PC-1HF1
PC-2HBF2
PC-2HF2
PC-3HBF3
PC-3HF3
PC-4HBF4
PC-4HF4
PC-6HBF6
PC-6HF6
PC-8HBF8
PC-8HF8
PC-10HBF10
PC-10HF10
PC-12HBF12
PC-12HF12
brass
PC-H1F1-B
PC-H2BF2-B
PC-H2F2-B
PC-H3BF3-B
PC-H3F3-B
PC-H4BF4-B
PC-H4F4-B
PC-H6BF6-B
PC-H6F6-B
PC-H8BF8-B
PC-H8F8-B
PC-H10BF10-B
PC-H10F10-B
PC-H12BF12-B
PC-H12F12-B
galvanized steel
PC-H1F1
PC-H2BF2
PC-H2F2
PC-H3BF3
PC-H3F3
PC-H4BF4
PC-H4F4
PC-H6BF6
PC-H6F6
PC-H8BF8
PC-H8F8
PC-H10BF10
PC-H10F10
PC-H12BF12
PC-H12F12
AISI 303
PC-1HF1-S
PC-2HBF2-S
PC-2HF2-S
PC-3HBF3-S
PC-3HF3-S
PC-4HBF4-S
PC-4HF4-S
PC-6HBF6-S
PC-6HF6-S
PC-8HBF8-S
PC-8HF8-S
PC-10HBF10-S
PC-10HF10-S
PC-12HBF12-S
PC-12HF12-S
code
AISI 303
PC-H1F1-S
PC-H2BF2-S
PC-H2F2-S
PC-H3BF3-S
PC-H3F3-S
PC-H4BF4-S
PC-H4F4-S
PC-H6BF6-S
PC-H6F6-S
PC-H8BF8-S
PC-H8F8-S
PC-H10BF10-S
PC-H10F10-S
PC-H12BF12-S
PC-H12F12-S
size
[inch]
3/16
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
820

brass
207
207
172
172
138
103
69
69
galvanized steel
275
345
275
275
275
275
172
172
AISI 303
241
241
241
241
207
138
138
103

[l/min]
16
23
55
83
151
260
476
642

Dry break couplings according to ISO-F standard
DNP PLT1, HQ IFX (1/4 1.1/2)
Standard:
Applications:
Working press.:
Material:
Seal:
Advantages:
ISO 16028 (except size 1.1/2)

Up to 315 bar (safety factor: 4:1 - DNP, 3:1 - HQ)
Galvanized steel
Inexpensive dry-break quick release couplings
Dry-break, flat-face quick release couplings in an economical version. Mainly used in construction machinery.
Sockets have safety locking pins preventing accidental disconnection. One hand operation. Interchangeable with
ISO-F quick release couplings of different producers.
Socket
size
[inch]
female thread
[inch]
1/4
1
1.1/2
1/4" BSP
3/8 BSP
1/2" BSP
1/2" BSP
3/4" BSP
3/4" BSP
1 BSP
1.1/4 BSP
1.1/2 BSP
size
[inch]
female thread
[inch]
1/4
1/4" BSP
3/8 BSP
1/2" BSP
1/2" BSP
3/4" BSP
3/4" BSP
1 BSP
1.1/4 BSP
1.1/2 BSP
3/8
1/2
3/4
Plug
3/8
1/2
3/4
1
1.1/2
Blank plugs/caps
size
[inch]
material
1/4
3/8
1/2
3/4
1
PVC
code
DNP PLT1
DP-PLT1-0606002
DP-PLT1-1310002
DP-PLT1-1313002
DP-PLT1-2013002
DP-PLT1-2019002
DP-PLT1-2519002
DP-PLT1-2525002
DP-PLT1-3031002
DP-PLT1-3939002
HQ IFX
HQ-IFX10-F-06G
HQ-IFX10-F-08G
HQ-IFX12-F-08G
HQ-IFX12-F-12G
HQ-IFX19-F-16G
code
DNP PLT1
DP-PLT1-0606003
DP-PLT1-1310003
DP-PLT1-1313003
DP-PLT1-2013003
DP-PLT1-2019003
DP-PLT1-2519003
DP-PLT1-2525003
DP-PLT1-3031003
DP-PLT1-3939003
HQ IFX
HQ-IFX10-M-06G
HQ-IFX10-M-08G
HQ-IFX12-M-08G
HQ-IFX12-M-12G
HQ-IFX19-M-16G
-
socket blank plug code

DNP PLT1
DP-SPLT-06002
DP-SPLT-13002
DP-SPLT-20002
DP-SPLT-25002
DP-SPLT-30002
plug blank cap code
HQ IFX
HQ-IF06-F-RED
HQ-IF10-F-RED
HQ-IF12-F-RED
HQ-IF19-F-RED
HQ-IF25-F-RED
DNP PLT1
DP-SPLT-06003
DP-SPLT-13003
DP-SPLT-20003
DP-SPLT-25003
DP-SPLT-30003
HQ IFX
HQ-IF06-M-RED
HQ-IF10-M-RED
HQ-IF12-M-RED
HQ-IF19-M-RED
HQ-IF25-M-RED
size
[inch]
1/4
3/8
1/2
3/4
1
1.1/2
working pressure
[bar]
DNP PLT1
300
250
250
250
250
250

[l/min]
HQ IFX
315
315
315
-
DNP PLT1
24
54
98
228
300
650
HQ IFX
72
120
280
-
821

CEJN X64/X65, DNP PLT4/PLK4, HQ IF
(3/16 1.1/2)
Standard:
Applications:
ISO 16028 (except size 3/16 and 1.1/2)

Industrial
Working press.: Up to: 720 bar
Material:
Galvanized steel
Seal:
Advantages:
Dry break, increased resistance to corrosion
(HQ quick release couplings)
Dry break, flat face quick release couplings designed mainly for construction equipment in which high pressure
peaks occur. HQ quick release couplings have zinc-nickel plated coating which provides several times better resistance to corrosion than zinc-plated one. Sockets have a safety locking pin preventing accidental disconnection. A
plug with a static pressure eliminator is also available. One hand operation. Depending on application, the seal
material must be chosen. Interchangeable with ISO-F quick release couplings of different producers. AISI 316
steel version is available on request.
Socket
size
[inch]
female thread
[inch]
3/16
1/4
1.1/2
1/8" BSP
1/4" BSP
3/8 BSP
1/2" BSP
1/2" BSP
3/4" BSP
3/4" BSP
3/4" BSP
1 BSP
1 BSP
1.1/4 BSP
1.1/2 BSP
size
[inch]
female thread
[inch]
3/16
1/4
1/8" BSP
1/4" BSP
3/8 BSP
1/2" BSP
1/2" BSP
3/4" BSP
3/4" BSP
3/4" BSP
1 BSP
1 BSP
1.1/4 BSP
1.1/2 BSP
3/8
1/2
5/8
3/4
1
Plug
3/8
1/2
5/8
3/4
1
1.1/2
822
code
CEJN X65
CJ-H-101651201
CJ-H-102651202
CJ-H-103651204
CJ-H-103651205
CJ-H-105651205
CJ-H-105651207
CJ-H-106651201
CJ-H-107651201
CJ-H-107651203
CJ-H-100651203
-
DNP PLT4
DP-PLT4-0404112
DP-PLT4-0606112
DP-PLT4-1310112
DP-PLT4-1313112
DP-PLT4-2013112
DP-PLT4-2019112
DP-PLT4-2219112
DP-PLT4-2519112
DP-PLT4-2525112
DP-PLT4-3025112
DP-PLT4-3031112
-
CEJN X65
CJ-H-101656201
CJ-H-102656202
CJ-H-103656204
CJ-H-103656205
CJ-H-105656205
CJ-H-105656207
CJ-H-106656201
CJ-H-107656201
CJ-H-107656203
CJ-H-100656203
-
DNP PLT4
DP-PLT4-0404113
DP-PLT4-0606113
DP-PLT4-1310113
DP-PLT4-1313113
DP-PLT4-2013113
DP-PLT4-2019113
DP-PLT4-2219113
DP-PLT4-2519113
DP-PLT4-2525113
DP-PLT4-3025113
DP-PLT4-3031113
-
HQ IF
HQ-IF06-F-04G
HQ-IF10-F-06G
HQ-IF10-F-08G
HQ-IF12-F-08G
HQ-IF12-F-12G
HQ-IF16-F-12G
HQ-IF19-F-12G
HQ-IF19-F-16G
HQ-IF25-F-20G
HQ-IF40-F-24G
code
HQ IF
HQ-IF06-M-04G
HQ-IF10-M-06G
HQ-IF10-M-08G
HQ-IF12-M-08G
HQ-IF12-M-12G
HQ-IF16-M-12G
HQ-IF19-M-12G
HQ-IF19-M-16G
HQ-IF25-M-20G
HQ-IF40-M-24G

Plug with pressure eliminator
size
[inch]
female thread
[inch]
1/4
1/4" BSP
3/8 BSP
1/2" BSP
1/2" BSP
3/4" BSP
3/4" BSP
3/4" BSP
1 BSP
1 BSP
1.1/4 BSP
3/8
1/2
5/8
3/4
1
Socket blank plug
Plug blank cap
size
[inch]
material
3/16
1/4
3/8
1/2
5/8
3/4
1
PVC
size
[inch]
material
3/16
1/4
3/8
1/2
5/8
3/4
1
PVC
code
CEJN X65
CJ-H-102646202
CJ-H-103646204
CJ-H-103646205
CJ-H-105646205
CJ-H-105646207
CJ-H-106646201
CJ-H-107646201
CJ-H-107646203
-
DNP PLK4
DP-PLK4-0606113
DP-PLK4-1310113
DP-PLK4-1313113
DP-PLK4-2013113
DP-PLK4-2019113
DP-PLK4-2219113
DP-PLK4-2519113
DP-PLK4-2525113
DP-PLK4-3025113
DP-PLK4-3031113
HQ IF
-
code
CEJN
CJ-H-091651000
CJ-H-092651000
CJ-H-093651000
CJ-H-095651000
CJ-H-096651000
CJ-H-097651000
-
DNP
DP-SPLT-06002
DP-SPLT-13002
DP-SPLT-20002
DP-SPLT-25002
DP-SPLT-30002
HQ
HQ-IF06-F-RED
HQ-IF10-F-RED
HQ-IF12-F-RED
HQ-IF16-F-RED
HQ-IF19-F-RED
HQ-IF25-F-RED
code
CEJN
CJ-H-091651050
CJ-H-092651050
CJ-H-093651050
CJ-H-095651050
CJ-H-096651050
CJ-H-097651050
-
DNP
DP-SPLT-06003
DP-SPLT-13003
DP-SPLT-20003
DP-SPLT-25003
DP-SPLT-30003
HQ
HQ-IF06-M-RED
HQ-IF10-M-RED
HQ-IF12-M-RED
HQ-IF16-M-RED
HQ-IF19-M-RED
HQ-IF25-M-RED
size
[inch]
3/16
1/4
3/8
1/2
5/8
3/4
1
1.1/2
working / bursting pressure *

[bar]
CEJN
720 / 1800
500 / 1500
400 / 1200
400 / 1200
400 / 1200
400 / 1200
300 / 800
-
DNP PLT4
500 / 2500
400 / 1900
350 / 1600
350 / 1700
350 / 1500
350 / 1800
350 / 1500
-
DNP PLK4
400 / 1900
350 / 1400
350 / 1400
350 / 1400
300 / 1200
300 / 1200
-

[l/min]
HQ IF
400 / 2000
375 / 1500
350 / 1500
350 / 1500
350 / 1450
315 / 1000
250 / 1000
CEJN X65
6,8
23
43
90
120
180
441
-
CEJN X64
15
28
75
110
160
-
DNP PLT4
10,5
24
66
100
128
232
300
-
DNP PLK4
28
44
90
150
180
232
-
HQ IF
30
72
120
180
280
375
1085
* - the value of bursting pressure is given for a connected quick release coupling.
823

Multiple coupling system
CEJN Multi-X (3/8 3/4)
Standard:
ISO 16028
Applications:
Working press.: Up to: 350 bar - feed (safety factor: 3.4:1),
Up to 50 bar - return
Material:
Components made of galvanized steel,
anodized aluminium, zinc and brass
Seal:
Advantages:
Connection of several quick release couplings
at the same time
CEJN Multi-X is a user friendly, multiple coupling system designed for the most challenging working conditions.
Allows to connect 2 or 4 hose assemblies at the same time. A socket part is equipped with an assembly plate necessary to attach the multi coupling system to the machines body. Plugs are equipped with a pressure eliminator
which allows to connect the system when there is static pressure in the installation. Hose assemblies are connected
with the socket and plug part of the multi coupling system using WEO system which prevents twisting of hoses.
Socket plate
Plug plate
824
coupling
size
WEO coupling
size
L
[mm]
W
[mm]
H1
[mm]
H2
[mm]
H3
[mm]
code
2 x 3/8
2 x 1/2
83
168
70
138
CJ-H-109322000
2 x 1/2"
2 x 3/4
98
176
79
139
CJ-H-109322001
4 x 3/8
4 x 1/2
83
168
88
155
CJ-H-109323000
2 x 3/8
2 x 1/2
2 x 1/2
2 x 3/4
98
176
99
159
CJ-H-109324000
4 x 1/2
4 x 3/4
98
176
99
159
CJ-H-109324001
2 x 1/2
2 x 3/4
4 x 3/4
120
214
107
170
CJ-H-109325000
coupling
size
WEO coupling
size
L
[mm]
W
[mm]
H1
[mm]
H2
[mm]
H3
[mm]
code
2 x 3/8
2 x 3/8
116
116
66
CJ-H-109322050
2 x 1/2"
2 x 1/2
138
132
73
CJ-H-109322051
4 x 3/8
4 x 3/8
116
116
83
CJ-H-109323050
2 x 3/8
2 x 1/2
2 x 3/8
2 x 1/2
138
132
93
CJ-H-109324050
4 x 1/2
4 x 1/2
138
132
93
CJ-H-109324051
2 x 1/2
2 x 3/4
2 x 1/2
2 x 3/4
182
179
97
CJ-H-109325050

Multiple coupling system
Blank plug/caps
(plug part)
coupling size
[inch]
Adaptor WEO - JIC
Adaptor WEO - BSP
code
plug blank cap
socket blank cap
2 x 3/8
CJ-H-099321050
CJ-H-099321000
2 x 1/2
CJ-H-099321052
CJ-H-099321002
CJ-H-099321051
CJ-H-099321001
CJ-H-099321053
CJ-H-099321003
4 x 1/2
CJ-H-099321053
CJ-H-099321003
2 x 1/2
2 x 3/4
CJ-H-099321055
CJ-H-099321005
4 x 3/8
PVC
2 x 3/8
2 x 1/2
(socket part)
material
WEO size
[inch]
thread size
[inch]
code
3/8
9/16 - 18 UNF
CJ-H-147270609
1/2
3/4" - 16 UNF
CJ-H-147270812
3/4
1.1/16 - 12 UNF
CJ-H-147271217
WEO size
[inch]
thread size
[inch]
code
3/8
3/8 BSP
CJ-H-147240606
1/2
1/2 BSP
CJ-H-147240808
3/4
3/4" BSP
CJ-H-147241212
WEO - connection example

WEO system allows to assemble hydraulic hoses without the use of tools and spanners. The only tool needed
is a screwdriver. It is an ideal solution in applications where there is not enough space to assemble the hoses in
a traditional way. WEO system significantly reduces assembly time. After connection of a plug with a socket, the
plug can align itself (swivel movement), what prevents hose kinking during operation.
assembly stop - POM

release ring - POM
locking hooks hardened steel
O-ring - NBR
plug- WEO
back-up ring - Hytrel
O-ring - NBR
socket WEO
825

NORDIC RANGE couplings
CEJN 525, TEMA STANDARD (3/16 2)
Standard:
Applications:
Producers standard
Industrial (water, steam, fuels and oils,
gases, chemicals),
Material:
Chrome-plated brass (TEMA sockets up to 1)
galvanized steel (other items)
Seal:
Advantages:
Double O-ring seal, locking ring
Quick release couplings designed for heavy duty operation. Sockets, except 3/16 size, equipped with an additional
O-ring are perfect for gas installations. Both a socket and a plug are available with a static pressure eliminator.
The socket, except 3/16 size, has an additional safety locking ring preventing accidental disconnection. They can
be used as single shut-off only in 3/16 and 1/4 sizes and only from the socket side. Depending on application,
the seal material must be chosen.
picture
Socket
size
[inch]
3/16
1/4
description
with valve
without valve
with valve
without valve
female
thread
[inch]
1/8
BSP
1/4
BSP
with valve
3/8
without valve
with valve
and eliminator
3/8
BSP
with valve
(3/16 and 1/4 size)
1/2
without valve
with valve
and eliminator
1/2
BSP
with valve
3/4
without valve
with valve
and eliminator
3/4
BSP
with valve
1
without valve
with valve
and eliminator
1
BSP
with valve
1.1/2
without valve
with valve
and eliminator
826
with valve
without valve
1.1/2
BSP
2
BSP
seal
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
code
CEJN
CJ-H-105251202
CJ-H-105251212
CJ-H-105250202
CJ-H-105251204
CJ-H-105251214
CJ-H-105250204
CJ-H-105251234
CJ-H-105251205
CJ-H-105251215
CJ-H-105250205
CJ-H-105251235
CJ-H-105251207
CJ-H-105251217
CJ-H-105250207
CJ-H-105251237
CJ-H-105251209
CJ-H-105251219
CJ-H-105250209
CJ-H-105251239
-
TEMA
TA-H-2310
TA-H-2310V
TA-H-2310UV
TA-H-2310VUV
TA-H-2510
TA-H-2510V
TA-H-2510UV
TA-H-2510VUV
TA-H-3810
TA-H-3810V
TA-H-3810UV
TA-H-3810VUV
TA-H-3811
TA-H-3811V
TA-H-5010
TA-H-5010V
TA-H-5010UV
TA-H-5010VUV
TA-H-5011
TA-H-5011V
TA-H-7510
TA-H-7510V
TA-H-7510UV
TA-H-7510VUV
TA-H-7511
TA-H-7511V
TA-H-10010
TA-H-10010V
TA-H-10010UV
TA-H-10010VUV
TA-H-10011
TA-H-10011V
TA-H-15010
TA-H-15010V
TA-H-15010UV
TA-H-15010VUV
TA-H-15011
TA-H-15011V
TA-H-20010
TA-H-20010V
TA-H-20010UV
TA-H-20010VUV

NORDIC RANGE couplings
picture
Plug
size
[inch]
3/16
1/4
(3/16 and 1/4 size)
description
with valve
without valve
with valve
without valve
with a valve
3/8
without valve
with valve
and eliminator
with valve
1/2
without valve
with valve
and eliminator
with valve
3/4
without valve
with valve
and eliminator
with valve
without valve
with valve
and eliminator
with valve
1.1/2
without valve
with valve
and eliminator
with valve
without valve
female
thread
[inch]
1/8
BSP
1/4
BSP
3/8
BSP
1/2
BSP
3/4
BSP
1
BSP
1.1/2
BSP
2
BSP
code
seal
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
-
CEJN
CJ-H-105256202
CJ-H-105256212
CJ-H-105255202
CJ-H-105256204
CJ-H-105256214
CJ-H-105255204
CJ-H-105256234
CJ-H-105256205
CJ-H-105256215
CJ-H-105255205
CJ-H-105256235
CJ-H-105256207
CJ-H-105256217
CJ-H-105255207
CJ-H-105256237
CJ-H-105256209
CJ-H-105256219
CJ-H-105255209
CJ-H-105256239
-
TEMA
TA-H-2320
TA-H-2320V
TA-H-2320UV
TA-H-2520
TA-H-2520V
TA-H-2520UV
TA-H-3820
TA-H-3820V
TA-H-3820UV
TA-H-3821
TA-H-3821V
TA-H-5020
TA-H-5020V
TA-H-5020UV
TA-H-5021
TA-H-5021V
TA-H-7520
TA-H-7520V
TA-H-7520UV
TA-H-7521
TA-H-7521V
TA-H-10020
TA-H-10020V
TA-H-10020UV
TA-H-10021
TA-H-10021V
TA-H-15020
TA-H-15020V
TA-H-15020UV
TA-H-15021
TA-H-15021V
TA-H-20020
TA-H-20020V
TA-H-20020UV
size
[inch]
3/16
1/4
3/8
1/2
3/4
1
1.1/2
2
working pressure
[bar]
CEJN
450 / 300
350 / 280
300 / 250
280 / 200
250 / 250
-
TEMA
200 / 100
450 / 300
350 / 280
300 / 250
280 / 200
250 / 200
200 / 180
180 / 150
bursting pressure
[bar]
CEJN
1800 / 1200
1300 / 1100
1100 / 1000
1000 / 800
930 / 1000
-
TEMA
800 / 400
1800 / 1200
1300 / 1120
1200 / 1000
1120 / 800
930 / 800
800 / 720
720 / 600

[l/min]
CEJN
24
57
101
212
355
-
TEMA
12
24
52
110
205
280
660
1150
827

NORDIC RANGE (SS) couplings
CEJN 526, TEMA STANDARD (3/16 2)
Standard:
Applications:
Producers standard
gases, chemicals),
Material:
Stainless steel (AISI 316)
Seal:
Advantages:
Double O-ring seal, locking ring
Quick release couplings designed for heavy duty operation. Sockets, except 3/16 size, are equipped with a safety
locking ring preventing accidental disconnection and an additional O-ring (perfect for gas installations). Available
with a static pressure eliminator. They can be used as single shut-off only in 3/16 and 1/4 sizes and only from the
socket side. Depending on application, the seal material must be chosen. For pulsating pressure, the maximum
working pressure must be reduced by 50%.
picture
size
[inch]
3/16
Socket
1/4
3/8
(3/16 and 1/4 size)
1/2
3/4
1
1.1/2
2
picture
size
[inch]
3/16
Plug
1/4
(3/16 and 1/4 size)
3/8
1/2
(from 3/8 up to 1 size)
3/4
1
1.1/2
(1.1/2 and 2 size)
828
description
with valve
without valve
with valve
without valve
with valve
without valve
with valve and eliminator
with valve
without valve
with valve
without valve
with valve
without valve
with valve
without valve
with valve
without valve
description
with valve
without valve
with valve
without valve
with valve
without valve
with valve
without valve
with valve
without valve
with valve
without valve
with valve
without valve
with valve
without valve
female
thread
[inch]
1/8
BSP
1/4
BSP
3/8
BSP
1/2
BSP
3/4
BSP
1
BSP
1.1/2
BSP
2
BSP
female
thread
[inch]
1/8
BSP
1/4
BSP
3/8
BSP
1/2
BSP
3/4
BSP
1
BSP
1.1/2
BSP
2
BSP
code
CEJN
CJ-H-105261212
CJ-H-105261214
CJ-H-105261215
CJ-H-105261217
CJ-H-105261219
-
TEMA
TA-H-2310RFV
TA-H-2310RVUV
TA-H-2510RV
TA-H-2510RVUV
TA-H-3810RV
TA-H-3810RVUV
TA-H-3811RV
TA-H-5010RV
TA-H-5010RVUV
TA-H-5011RV
TA-H-7510RV
TA-H-7510RVUV
TA-H-7511RV
TA-H-10010RV
TA-H-10010RVUV
TA-H-10011RV
TA-H-15010RV
TA-H-15010RVUV
TA-H-20010RV
TA-H-20010RVUV
code
CEJN
CJ-H-105266212
CJ-H-105266214
CJ-H-105266215
CJ-H-105266217
CJ-H-105266219
-
TEMA
TA-H-2320RFV
TA-H-2320RUV
TA-H-2520RV
TA-H-2520RUV
TA-H-3820RV
TA-H-3820RUV
TA-H-3821RV
TA-H-5020RV
TA-H-5020RUV
TA-H-5021RV
TA-H-7520RV
TA-H-7520RUV
TA-H-7521RV
TA-H-10020RV
TA-H-10020RUV
TA-H-10021RV
TA-H-15020RV
TA-H-15020RUV
TA-H-20020RV
TA-H-20020RUV

NORDIC RANGE (SS) couplings
size
[inch]
3/16
1/4
3/8
1/2
3/4
1
1.1/2
2
working pressure
[bar]
CEJN
250 / 250
300 / 250
300 / 250
200 / 200
200 / 150
-
TEMA
200 / 100
250 / 250
300 / 210
300 / 250
250 / 200
250 / 200
150 / 150
120 / 120
bursting pressure
[bar]
CEJN
1000 / 1000
1200 / 1000
1200 / 1000
1000 / 800
800 / 600
-

[l/min]
TEMA
800 / 400
1000 / 1000
1200 / 840
1200 / 1000
1000 / 800
1000 / 800
600 / 600
480 / 480
CEJN
24
57
101
212
355
-
TEMA
12
24
52
110
205
280
660
1150
NORDIC RANGE and NORDIC RANGE SS accessories

Seal kits for sockets
size
[inch]
material
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
NBR
Viton
3/16
1/4
3/8
1/2
3/4
1
1.1/2
2
Socket lubricator
size
[inch]
code
3/8
TA-H-GR3
1/2
TA-H-GR5
3/4
TA-H-GR7
TA-H-GR10
code
CEJN
CJ-H-105254900
CJ-H-105254901
CJ-H-105254902
CJ-H-105254903
CJ-H-105254904
-
TEMA
TA-P-11310N
TA-P-11310V
TA-H-2500-PSN
TA-H-2500-PSV
TA-H-3800-PSN
TA-H-3800-PSV
TA-H-5000-PSN
TA-H-5000-PSV
TA-H-7500-PSN
TA-H-7500-PSV
TA-H-10000-PSN
TA-H-10000-PSV
TA-H-15000-PSN
TA-H-15000-PSV
TA-H-20000-PSN
TA-H-20000-PSV
Blank plugs/caps
size
[inch]
3/16
1/4
3/8
1/2
3/4
1
1.1/2
2
socket blank plug code

CEJN
TEMA
TA-H-2315
CJ-H-095251001
TA-H-2516
CJ-H-095251002
TA-H-3816
CJ-H-095251003
TA-H-5016
CJ-H-095251004
TA-H-7516
CJ-H-095251005
TA-H-10016
TA-H-15015
TA-H-20015
plug blank cap code

CEJN
TEMA
TA-P-125
CJ-H-095251051
TA-H-2526
CJ-H-095251052
TA-H-3826
CJ-H-095251053
TA-H-5026
CJ-H-095251054
TA-H-7526
CJ-H-095251055
TA-H-10026
TA-H-15025
TA-H-20025
material
CEJN
TEMA
PVC
PVC
POM
EBA
colour
CEJN
TEMA
red
black
blue
black
829

Screw to connect couplings
DNP PVV3, HQ HS (1/4 1.1/4)
Standard:
Applications:
Working press.:
Material:
Seal:
Advantages:
Producers standard
Up to 450 bar
Galvanized steel
O-ring protecting from unscrewing under
pulsating pressure and vibrations
Standard quick release screw to connect couplings equipped with an additional O-ring on the socket body which
prevents unscrewing of the coupling exposed to pulsating pressure and vibrations. The coupling can be connected
under max. 50 bar (pressure from a socket side or plug side).
Socket
Plug
Socket DIN 2353 light series
female thread
[inch]
M thread
[mm]
DNP PVV3
HQ HS
1/4
1/4" BSP
M24x2
DP-PVV3-0606112
HQ-HS06-F-04G
3/8
3/8 BSP
M28x2
DP-PVV3-1010112
HQ-HS10-F-06G
1/2
1/2" BSP
M36x2
DP-PVV3-1313112
HQ-HS12-F-08G
3/4
3/4" BSP
M42x2
DP-PVV3-2019112
HQ-HS19-F-12G
1 BSP
M48x3
DP-PVV3-2525112
HQ-HS25-F-16G
1.1/4
1.1/4 BSP
M70x3
DP-PVV3-3031112
HQ-HS32-F-20G
size
[inch]
female thread
[inch]
M thread
[mm]
DNP PVV3
HQ HS
1/4
1/4" BSP
M24x2
DP-PVV3-0606113
HQ-HS06-M-04G
3/8
3/8 BSP
M28x2
DP-PVV3-1010113
HQ-HS10-M-06G
1/2
1/2" BSP
M36x2
DP-PVV3-1313113
HQ-HS12-M-08G
3/4
3/4" BSP
M42x2
DP-PVV3-2019113
HQ-HS19-M-12G
1 BSP
M48x3
DP-PVV3-2525113
HQ-HS25-M-16G
1.1/4 BSP
M70x3
DP-PVV3-3031113
HQ-HS32-M-20G
size
[inch]
male thread
[mm]
M thread
[mm]
1/4
3/8
M24x2
M28x2
1
1.1/4
M14x1,5 (8L)
M16x1,5 (10L)
M18x1.5 (12L)
M22x1.5 (15L)
M26x1,5 (18L)
M30x2 (22L)
M36x2 (28L)
M45x2 (35L)
size
[inch]
male thread
[mm]
M thread
[mm]
1/4
3/8
M14x1,5 (8L)
M16x1,5 (10L)
M18x1.5 (12L)
M22x1.5 (15L)
M26x1,5 (18L)
M30x2 (22L)
M36x2 (28L)
M45x2 (35L)
M24x2
M28x2
3/4
1/2
3/4
1
1.1/4
830
code
1.1/4
1/2
Plug DIN 2353 light series
code
size
[inch]
M36x2
M42x2
M48x3
M70x3
M36x2
M42x2
M48x3
M70x3
code
DNP PVV3
DP-PVV3-0614302
DP-PVV3-1016302
DP-PVV3-1318302
DP-PVV3-1322302
DP-PVV3-2026302
DP-PVV3-2030302
DP-PVV3-2536302
-
HQ HS
HQ-HS06-F-08L
HQ-HS10-F-10L
HQ-HS12-F-12L
HQ-HS12-F-15L
HQ-HS19-F-18L
HQ-HS19-F-22L
HQ-HS25-F-28L
HQ-HS32-F-35L
code
DNP PVV3
DP-PVV3-0614303
DP-PVV3-1016303
DP-PVV3-1318303
DP-PVV3-1322303
DP-PVV3-2026303
DP-PVV3-2030303
DP-PVV3-2536303E
-
HQ HS
HQ-HS06-M-08L
HQ-HS10-M-10L
HQ-HS12-M-12L
HQ-HS12-M-15L
HQ-HS19-M-18L
HQ-HS19-M-22L
HQ-HS25-M-28L
HQ-HS32-M-35L

Socket DIN 2353 heavy series
size
[inch]
1.1/4
size
[inch]
male thread
[mm]
1/2
3/4
1
3/8
1/2
3/4
1
1.1/4
Socket blank plug
Plug blank cap
M thread
[mm]
M16x1,5 (8S)
M18x1.5 (10S)
M20x1,5 (12S)
M22x1.5 (14S)
M24x1,5 (16S)
M30x2 (20S)
M30x2 (20S)
M36x2 (25S)
M42x2 (30S)
M52x2 (38S)
3/8
Plug DIN 2353 heavy series
male thread
[mm]
M28x2
M36x2
M42x2
M48x3
M70x3
M thread
[mm]
M16x1,5 (8S)
M18x1.5 (10S)
M20x1,5 (12S)
M22x1.5 (14S)
M24x1,5 (16S)
M30x2 (20S)
M30x2 (20S)
M36x2 (25S)
M42x2 (30S)
M52x2 (38S)
size
[inch]
material
1/4
3/8
1/2
3/4
1
1.1/4
PP
size
[inch]
material
1/4
3/8
1/2
3/4
1
1.1/4
PP
M28x2
M36x2
M42x2
M48x3
M70x3
code
DNP PVV3
DP-PVV3-1016402
DP-PVV3-1018402
DP-PVV3-1320402
DP-PVV3-1322402
DP-PVV3-2024402
DP-PVV3-2030402
DP-PVV3-2530402
DP-PVV3-2536402
DP-PVV3-2542402
DP-PVV3-3052402
HQ HS
HQ-HS10-F-08S
HQ-HS10-F-10S
HQ-HS12-F-12S
HQ-HS12-F-14S
HQ-HS19-F-16S
HQ-HS19-F-20S
HQ-HS25-F-20S
HQ-HS25-F-25S
HQ-HS25-F-30S
HQ-HS32-F-38S
code
DNP PVV3
DP-PVV3-1016403
DP-PVV3-1018403
DP-PVV3-1320403
DP-PVV3-1322403
DP-PVV3-2024403
DP-PVV3-2030403
DP-PVV3-2530403
DP-PVV3-2536403
DP-PVV3-2542403
DP-PVV3-3052403
HQ HS
HQ-HS10-M-08S
HQ-HS10-M-10S
HQ-HS12-M-12S
HQ-HS12-M-14S
HQ-HS19-M-16S
HQ-HS19-M-20S
HQ-HS25-M-20S
HQ-HS25-M-25S
HQ-HS25-M-30S
HQ-HS32-M-38S
code
DNP
DP-SPVV-06002
DP-SPVV-10002
DP-SPVV-13002
DP-SPVV-20002
DP-SPVV-25002
DP-SPVV-30002
HQ
HQ-HS06-F-RED
HQ-HS10-F-RED
HQ-HS12-F-RED
HQ-HS19-F-RED
HQ-HS25-F-RED
HQ-HS32-F-RED
code
DNP
DP-SPVV-06003
DP-SPVV-10003
DP-SPVV-13003
DP-SPVV-20003
DP-SPVV-25003
DP-SPVV-30003
HQ
HQ-HS06-M-RED
HQ-HS10-M-RED
HQ-HS12-M-RED
HQ-HS19-M-RED
HQ-HS25-M-RED
HQ-HS32-M-RED
size
[inch]
1/4
3/8
1/2
3/4
1
1.1/4
working / bursting pressure *

[bar]
DNP PVV3
350 / 1400
325 / 1800
300 / 1400
250 / 1400
250 / 1400
250 / 1000
HQ HS
450 / 1800
450 / 1600
400 / 1400
400 / 1500
300 / 1180
300 / 1800

[l/min]
DNP PVV3
17
56
88
135
218
537
HQ HS
10
33
80
175
385
545
* - the value of bursting pressure is given for a connected quick release coupling.
831

GROMELLE (1/4 2)
Standard:
Applications:
Producers standard
Industrial (water, steam, fuel and oil
gases and chemicals )
Material:
Galvanized steel, stainless steel
Seal:
Viton (from -20C up to +200C) - standard
Advantages:
High working pressure
Quick release screw to connect couplings designed to resist heavy mechanical loads. Intended for high working
pressure applications (up to 1100 bar). The coupling can be connected under residual pressure. The material of
the coupling and seal must be selected according to its application. For pulsating pressure, when the quick release
coupling is disconnected, the maximum working pressure must be reduced by 50%.
Socket
Plug
Blank plugs/caps
size
[inch]
female thread
[inch]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
1/4" BSP
3/8 BSP
1/2" BSP
3/4" BSP
1 BSP
1.1/4 BSP
1.1/2 BSP
2 BSP
size
[inch]
female thread
[inch]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
1/4" BSP
3/8 BSP
1/2" BSP
3/4" BSP
1 BSP
1.1/4 BSP
1.1/2 BSP
2 BSP
size
[inch]
material
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
aluminium
code
galvanized steel
GR-WA-0601700
GR-WA-0602700
GR-WA-0603700
GR-WA-0604700
GR-WA-0605700
GR-WA-0606700
GR-WA-0607700
GR-WA-0609700
AISI 316L
GR-WV-06017V0
GR-WV-06027V0
GR-WV-06037V0
GR-WV-06047V0
GR-WV-06057V0
GR-WV-06067V0
GR-WV-06077V0
GR-WV-06097V0
code
galvanized steel
GR-WA-0601400
GR-WA-0602400
GR-WA-0603400
GR-WA-0604400
GR-WA-0605400
GR-WA-0606400
GR-WA-0607400
GR-WA-0609400
AISI 316L
GR-WV-06014V0
GR-WV-06024V0
GR-WV-06034V0
GR-WV-06044V0
GR-WV-06054V0
GR-WV-06064V0
GR-WV-06074V0
GR-WV-06094V0
code
socket blank plug

GR-WD-0611700
GR-WD-0612700
GR-WD-0613700
GR-WD-0614700
GR-WD-0615700
GR-WD-0616700
GR-WD-0617700
GR-WD-0619700
plug blank cap

GR-WD-0611400
GR-WD-0612400
GR-WD-0613400
GR-WD-0614400
GR-WD-0615400
GR-WD-0616400
GR-WD-0617400
GR-WD-0619400
832
size
[inch]
working / bursting pressure

[bar]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
1100 / 2400
750 / 2250
750 / 1600
650 / 1600
450 / 1100
450 / 1100
300 / 850
300 / 750

[l/min]
21
30
48
94
147
235
370
600

HQ TC (3/4 1)
Standard:
Applications:
Working press.:
Material:
Seal:
Advantages:
Producers standard
Up to 250 bar (safety factor 3:1)
Galvanized steel
Butterfly handles facilitate connection
without any special tools
Quick release screw to connect couplings are intended for hydraulic installations of tripper tracks. The socket is
equipped with a tightening nut which allows panel mounting. The plug with butterfly handles enables fast and easy
connection/disconnection without any special tools. The coupling can be connected under residual pressure (static
pressure which remains in the system after drive disconnection).
Socket
Plug
Socket blank plug
size
[inch]
female thread
[inch]
code
3/4
3/4" BSP
HQ-TC19-F-12G
1 BSP
HQ-TC25-F-16G
size
[inch]
female thread
[inch]
code
3/4
3/4" BSP
HQ-TC19-M-12G
1 BSP
HQ-TC25-M-16G
size
[inch]
material
code
3/4
HQ-TC19-F-PLUG
metal
Plug blank cap
HQ-TC25-F-PLUG
size
[inch]
material
3/4
code
HQ-TC19-M-CUP
metal
1
HQ-TC25-M-CUP
size
[inch]
working pressure
[bar]
3/4
1
250
250

[l/min]
185
240
833

HSP CUPLA (1/4 2)
Standard:
Applications:
Producers standard
Industrial
Nickel-plated steel
Material:
Seal:
Perfect finish, high reliability
Advantages:
Quick release couplings manufactured in Japan of special alloy steel. Highly durable, resistant to vibrations and
pulsating pressure. Used in hydraulic installations in foundry equipment where sudden pressure fluctuations occur.
Suitable for vacuum pressure. Depending on application, the material of seal must be chosen.
Socket and plug with female thread
size
[inch]
female thread
[inch]
socket code
plug code
1/4
1/4" BSPT
NK-2HS
NK-2HP
3/8
3/8 BSPT
NK-3HS
NK-3HP
1/2" BSPT
NK-4HS
NK-4HP
1/2
3/4
1
1.1/2
Socket and plug with male thread
NK-6HP
NK-66HS
NK-66HP
1 BSPT
NK-8HS
NK-8HP
1.1/4 BSPT
NK-10HS
NK-10HP
1.1/2 BSPT
NK-12HS
NK-12HP
2 BSPT
NK-16HS
NK-16HP
size
[inch]
male thread
[inch]
socket code
plug code
1/4
BSPT male thread
3/4 BSPT
NK-6HS
3/8
1/2
BSP male thread
1/4" BSPT
NK-2HS-R
NK-2HP-R
1/4 BSP
NK-2HS-GS
NK-2HP-GS
3/8" BSPT
NK-3HS-R
NK-3HP-R
3/8 BSP
NK-3HS-GS
NK-3HP-GS
1/2" BSPT
NK-4HS-R
NK-4HP-R
NK-4HP-GS
1/2 BSP
NK-4HS-GS
3/4" BSPT
NK-6HS-R
NK-6HP-R
3/4 BSP
NK-6HS-GS
NK-6HP-GS
834
size
[inch]
working pressure
[bar]

[l/min]
1/4
206
3/8
206
27
1/2
206
70
3/4
206
120
206
195
1.1/2 (10 HSP)
180
450
1.1/2 (12 HSP)
180
535
140
950

350 CUPLA (1/4 1.1/2)
Standard:
Applications:
Producers standard
Industrial
Material:
Nickel-plated steel
Seal:
Advantages:
Dry-break, perfect finish, high reliability
Dry-break, quick release couplings of a flat-face type manufactured in Japan of special alloy steel. Highly durable, resistant to vibrations and pulsating pressure. Low air inclusion. Used in hydraulic installations in foundry
equipment where sudden pressure fluctuations occur. Equipped with a safety locking pin preventing accidental
disconnection. For one hand operation. A distinctive feature of the quick release coupling is the working pressure
which does not depend on its size.
size
[inch]
Socket and plug with female thread
1/4
1/2
3/4
1
1.1/2
female thread
[inch]
coupling code
plug code
1/4" BSPT
NK-350-2S
NK-350-2P
3/8 BSPT
NK-350-3S
NK-350-3P
3/8 BSP
NK-350-3S-3G
NK-350-3P-3G
1/2" BSPT
NK-350-4S
NK-350-4P
NK-350-4P-4G
1/2" BSP
NK-350-4S-4G
3/4 BSPT
NK-350-6S
NK-350-6P
3/4 BSP
NK-350-6S-6G
NK-350-6P-6G
1 BSPT
NK-350-8S
NK-350-8P
1 BSP
NK-350-8S-8G
NK-350-8P-8G
1.1/4 BSPT
NK-350-10S
NK-350-10P
1.1/2 BSPT
NK-350-12S
NK-350-12P
size
[inch]
working pressure
[bar]

[l/min]
1/4
345
27
1/2
345
56
3/4
345
100
345
180
1.1/2
345
360
flat surface faces of valves

body made of special alloy steel
safety locking pin preventing
accidental disconnection
835

SNAP-TITE couplings
H series (1/4 2)
Standard:
Applications:
MIL-C-51234
gases and chemicals)
Working press.: Up to 759 bar (safety factor 2:1)
Material:
Brass, Galvanized steel, stainless steel,
anodized aluminium (option)
Seal:
EPDM (from -55C up to +150C)
Advantages:
Unique construction of valves allows
to obtain laminar flow
Quick release couplings manufactured in USA. Unique construction of valves allows to obtain laminar flow. Can be
used as single shut-off but only from the socket side. The socket is available with a safety locking pin preventing
accidental disconnection. Depending on application, the material of quick release coupling and seal must be chosen.
On request:
- quick release couplings IH series (socket of zinc plated steel in sizes from 1/4 to 3/4, a special construction
valve guarantees excellent resistance to pulsating pressure in pneumatic installations),
- quick release couplings PH series (socket and plug of zinc plated steel in sizes from 3/8 to 1, equipped with
a static pressure eliminator - can be connected under residual pressure, max. 210 bar),
- quick release couplings with other connection threads (UNF, NPT).
Plug
size
[inch]
1/4
836
female
thread
[inch]
1/4" BSP
1/8" BSP
1/4" BSP
3/8
3/8" BSP
1/2
1/2" BSP
3/4
3/4" BSP
1 BSP
1.1/4
1.1/4" BSP
1.1/2
1.1/2" BSP
2 BSP
code
seal
valve
NBR
Viton
NBR
Viton
NBR
Viton
NBR
EPDM
Viton
NBR
EPDM
Viton
NBR
Viton
NBR
EPDM
Viton
NBR
Viton
-
yes
yes
no
no
yes
yes
no
yes
yes
no
yes
yes
yes
no
yes
yes
yes
no
yes
yes
yes
yes
yes
no
yes
yes
no
brass
galvanized steel
AISI 316
SN-BVHN4-4RP
SN-BVHN4-4RPV
SN-BPHN4-4RP
SN-BVHN6-6RP
SN-BVHN6-6RPV
SN-BPHN6-6RP
SN-BVHN8-8RP
SN-BVHN8-8RPV
SN-BPHN8-8RP
SN-BVHN12-12RP
SN-BVHN12-12RPV
SN-BPHN12-12RP
SN-BVHN16-16RPV
SN-BPHN16-16RP
SN-BVHN20-20RPV
SN-BVHN24-24RP
SN-BVHN24-24RPV
SN-BVHN32-32RP
-
SN-VHN4-4RP
SN-PHN4-4RP
SN-VHN6-6RP
SN-VHN6-6RPV
SN-PHN6-6RP
SN-VHN8-8RP
SN-VHN8-8RPV
SN-PHN8-8RP
SN-VHN12-12RP
SN-PHN12-12RP
SN-VHN16-16RP
SN-PHN16-16RP
SN-VHN20-20RP
SN-VHN20-20RPV
SN-VHN24-24RP
SN-PHN24-24RP
SN-PHN32-32RP
SN-SVHN4-4RP
SN-SVHN4-4RPV
SN-SPHN4-2RP
SN-SPHN4-4RP
SN-SVHN6-6RP
SN-SVHN6-6RPV
SN-SPHN6-6RP
SN-SVHN8-8RP
SN-SVHN8-8RPV
SN-SPHN8-8RP
SN-SVHN12-12RP
SN-SVHN12-12RPE
SN-SVHN12-12RPV
SN-SPHN12-12RP
SN-SVHN16-16RP
SN-SVHN16-16RPE
SN-SVHN16-16RPV
SN-SPHN16-16RP
SN-SVHN20-20RP
SN-SVHN20-20RPV
SN-SVHN24-24RP
SN-SVHN24-24RPE
SN-SVHN24-24RPV
SN-SPHN24-24RP
SN-SVHN32-32RPV
-

SNAP-TITE couplings
Socket
size
[inch]
female
thread
[inch]
1/4
1/4" BSP
3/8
3/8" BSP
1/2
1/2" BSP
3/4
3/4" BSP
1 BSP
1.1/4
1.1/4" BSP
1.1/2
1.1/2" BSP
2 BSP
code
seal
valve
NBR
NBR
Viton
NBR
NBR
Viton
Viton
NBR
Viton
NBR
NBR
Viton
NBR
Viton
NBR
NBR
Viton
NBR
EPDM
Viton
NBR
Viton
NBR
Viton
Viton
NBR
NBR
Viton
NBR
EPDM
NBR
Viton
Viton
NBR
NBR
Viton
yes
yes
yes
no
no
no
no
yes
yes
no
no
no
yes
yes
no
no
no
yes
yes
yes
no
no
yes
yes
yes
no
yes
yes
yes
yes
yes
yes
yes
no
yes
yes
brass
galvanized steel
AISI 316
SN-BVHC4-4RP
SN-BVHC4-4RPV
SN-BPHC4-4RPV
SN-BVHC6-6RP
SN-BVHC6-6RPV
SN-BPHC6-6RP
SN-BPHC6-6RPV
SN-BVHC8-8RP
SN-BVHC8-8RPV
SN-BPHC8-8RPV
SN-BVHC12-12RP
SN-BVHC12-12RPV
SN-BPHC12-12RP
SN-BPHC12-12RPV
SN-BVHC16-16RP
SN-BVHC16-16RPV
SN-BVHC20-20RP
SN-BVHC20-20RPV
SN-BVHC24-24RP
SN-BVHC24-24RPV
SN-BVHC32-32RP
-
SN-VHC4-4RP
SN-VHC6-6RP
SN-PHC6-6RP
SN-VHC8-8RP
SN-PHC8-8RP
SN-VHC12-12RP
SN-PHC12-12RP
SN-VHC16-16RP
SN-PHC16-16RP
SN-VHC20-20RP
SN-VHC24-24RP
SN-VHC24-24RPSL*
-
SN-SVHC4-4RP
SN-SVHC4-4RPSL*
SN-SVHC4-4RPV
SN-SPHC4-4RP
SN-SPHC4-4RPSL
SN-SPHC4-4RPV
SN-SPHC4-4RPVSL*
SN-SVHC6-6RP
SN-SVHC6-6RPV
SN-SPHC6-6RP
SN-SPHC6-6RPSL*
SN-SPHC6-6RPV
SN-SVHC8-8RP
SN-SVHC8-8RPV
SN-SPHC8-8RP
SN-SPHC8-8RPSL*
SN-SPHC8-8RPV
SN-SVHC12-12RP
SN-SVHC12-12RPE
SN-SVHC12-12RPV
SN-SPHC12-12RP
SN-SPHC12-12RPV
SN-SVHC16-16RP
SN-SVHC16-16RPV
SN-SVHC16-16RPVSL*
SN-SPHC16-16RP
SN-SVHC20-20RPV
SN-SVHC24-24RPE
SN-SVHC24-24RPSL*
SN-SVHC24-24RPV
SN-SVHC24-24RPVSL*
SN-SPHC24-24RP
SN-SVHC32-32RPV
* - socket with a safety locking pin preventing accidental disconnection
Blank plugs/caps
size
[inch]
material
code
socket blank plug
plug blank cap
1/4
SN-AMPH-4
SN-ADCH-4
3/8
SN-AMPH-6
SN-ADCH-6
1/2
SN-AMPH-8
SN-ADCH-8
3/4
SN-AMPH-12
SN-ADCH-12
aluminium
SN-AMPH-16
SN-ADCH-16
1.1/4
SN-AMPH-20
SN-ADCH-20
1.1/2
SN-AMPH-24
SN-ADCH-24
SN-AMPH-32
SN-ADCH-32
837

SNAP-TITE couplings
Operating parameters - working pressure
size
[inch]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2

Single, double shut-off
brass
155
155
138
138
121
24
24
28
steel
448
310
276
241
138
121
103
103
AISI 316
345
276
259
138
138
103
103
34
free flow
aluminium
155
155
121
121
103
26
26
21
brass
276
276
276
241
207
69
69
52
galv. steel
759
759
759
621
414
345
345
276
AISI 316
690
552
552
483
276
207
207
69
Operating parameters - flow

size
[inch]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
flow rate at p = 3 bar [l/min]

double shut-off
21
28
73
135
196
308
420
1040
single shut-off
22
42
75
151
227
401
632
1296
Cross-section of connected quick release coupling
838
aluminium
276
276
276
241
207
69
69
52

SNAP-TITE couplings
71 series (1/8 2)
Standard:
Applications:
Producers standard
gases, chemicals)
Material:
Galvanized steel, stainless steel
Seal:
EPDM (from -55C up to +150C)
Advantages:
Dry-break, high working press. of quick release
couplings made of special stainless steel
Dry-break quick release couplings manufactured in USA, designed for heavy duty operation. Characterized by
the highest working pressure of all flat-face type quick release couplings (high pressure stainless steel version).
The socket is available with a safety locking pin preventing accidental disconnection. One hand operation. Depending on application, the material of quick release coupling and seal must be chosen. For pulsating pressure,
the maximum working pressure must be reduced by 40%. Quick release couplings with other connection threads
(UNF) are also available.
Plug
size
[inch]
female
thread **
[inch]
1/8
1/4 BSP
1/4 BSP
1/4
(1/8 size)
1/4 NPTF
(1/4 NPSF)
1/4 BSP
3/8 BSP
3/8
1/2 BSP
3/8 NPTF
(3/8 NPSF)
1/2 BSP
1/2
(1/4 1 size)
1/2 NPTF
(1/2 NPSF)
3/4 BSP
3/4
3/4 NPTF
(3/4 NPSF)
1 BSP
(2 size)
2
1 NPTF
(1 NPSF)
1.1/2 BSP
2 BSP
2 NPT
code
seal
NBR
Viton
NBR
Viton
NBR
EPDM
Viton
NBR
NBR
Viton
NBR
NBR
EPDM
Viton
NBR
Viton
NBR
EPDM
Viton
NBR
Viton
NBR
EPDM
Viton
NBR
EPDM
Viton
NBR
EPDM
Viton
NBR
NBR
NBR
EPDM
Viton
galvanized steel
AISI 316
SN-71N2-4RP
SN-71N2-4RPV
SN-71N4-4RP
SN-71N4-4RPV
SN-71N4-4F
SN-71N4-4FE
SN-71N4-4FV
SN-71N6-4RP
SN-71N6-6RP
SN-71N6-8RP
SN-71N6-6F
SN-71N6-6FE
SN-71N6-6FV
SN-71N8-8RP
SN-71N8-8F
SN-71N8-8FE
SN-71N8-8FV
SN-71N12-12RP
SN-71N12-12F
SN-71N12-12FE
SN-71N12-12FV
SN-71N16-16RP
SN-71N16-16F
SN-71N16-16FE
SN-71N16-16FV
SN-71N32-24RP
SN-71N32-32RP
SN-71N32-32F
SN-71N32-32FE
SN-71N32-32FV
SN-S71N4-4RP
SN-S71N4-4RPV
SN-S71N4-4F
SN-S71N4-4FE
SN-S71N4-4FV
SN-S71N6-6RP
SN-S71N6-6RPV
SN-S71N6-6F
SN-S71N6-6FE
SN-S71N6-6FV
SN-S71N8-8RP
SN-S71N8-8RPV
SN-S71N8-8F
SN-S71N8-8FE
SN-S71N8-8FV
SN-S71N12-12RP
SN-S71N12-12RPV
SN-S71N12-12F
SN-S71N12-12FE
SN-S71N12-12FV
SN-S71N16-16RP
SN-S71N16-16RPE
SN-S71N16-16RPV
SN-S71N16-16F
SN-S71N16-16FE
SN-S71N16-16FV
-
high pressure
stainless steel
SN-SH71N4-4RP
SN-SH71N4-4RPV
SN-SH71N4-4F
SN-SH71N4-4FE
SN-SH71N4-4FV
SN-SH71N6-6RP
SN-SH71N6-6RPV
SN-SH71N6-6F
SN-SH71N6-6FV
SN-SH71N8-8RP
SN-SH71N8-8RPV
SN-SH71N8-8F
SN-SH71N8-8FE
SN-SH71N8-8FV
SN-SH71N12-12RP
SN-SH71N12-12F
SN-SH71N12-12FV
SN-SH71N16-16F
SN-SH71N16-16FE
SN-SH71N16-16FV
-
** - threads of stainless steel plugs are given in brackets.
839

SNAP-TITE couplings
Socket
size
[inch]
female
thread **
[inch]
1/8
1/8" NPTF
1/4 BSP
1/4
(1/8 size)
1/4 NPTF
(1/4 NPSF)
1/4 BSP
3/8 BSP
3/8
1/2 BSP
3/8 NPTF
(3/8 NPSF)
1/2 BSP
1/2
(1/4 1 size)
1/2 NPTF
(1/2 NPSF)
3/4 BSP
3/4
3/4 NPTF
(3/4 NPSF)
1 BSP
1.1/4 BSP
1 NPTF
(1 NPSF)
(2 size)
1.1/2 BSP
2 BSP
2
2 NPT
code
seal
NBR
EPDM
NBR
NBR
Viton
NBR
EPDM
EPDM
NBR
Viton
Viton
NBR
NBR
NBR
Viton
NBR
NBR
EPDM
EPDM
NBR
Viton
Viton
NBR
NBR
Viton
NBR
EPDM
EPDM
NBR
Viton
Viton
NBR
NBR
Viton
Viton
NBR
EPDM
NBR
Viton
Viton
NBR
EPDM
NBR
Viton
NBR
NBR
NBR
EPDM
EPDM
NBR
Viton
Viton
NBR
NBR
NBR
NBR
Viton
Viton
galvanized steel
AISI 316
SN-71C2-2F
SN-71C2-2FE
SN-71C2-2FV
SN-71C4-4RP
SN-71C4-4RPV
SN-71C4-4F
SN-71C4-4FE
SN-71C4-4FSL*
SN-71C4-4FV
SN-71C4-4FVSL*
SN-71C6-4RP
SN-71C6-6RP
SN-71C6-6RPSL*
SN-71C6-8RP
SN-71C6-6F
SN-71C6-6FE
SN-71C6-6FESL*
SN-71C6-6FSL
SN-71C6-6FV
SN-71C6-6FVSL*
SN-71C8-8RP
SN-71C8-8RPSL*
SN-71C8-8F
SN-71C8-8FE
SN-71C8-8FESL*
SN-71C8-8FSL*
SN-71C8-8FV
SN-71C12-12RP
SN-71C12-12RPSL*
SN-71C12-12RPV
SN-71C12-12RPVSL*
SN-71C12-12F
SN-71C12-12FE
SN-71C12-12FSL*
SN-71C12-12FV
SN-71C12-12FVSL*
SN-71C16-16RP
SN-71C16-16RPSL*
SN-71C16-20RP
SN-71C16-20RPSL*
SN-71C16-16F
SN-71C16-16FE
SN-71C16-16FSL*
SN-71C16-16FV
SN-71C16-16FVSL*
SN-71C32-24RPSL*
SN-71C32-32RPSL*
SN-71C32-32F
SN-71C32-32FSL*
SN-71C32-32FV
SN-71C32-32FVSL*
SN-S71C4-4RPV
SN-S71C4-4F
SN-S71C4-4FE
SN-S71C4-4FSL*
SN-S71C4-4FV
SN-S71C4-4FVSL*
SN-S71C6-6RPV
SN-S71C6-6F
SN-S71C6-6FE
SN-S71C6-6FV
SN-S71C6-6FVSL*
SN-S71C8-8RP
SN-S71C8-8RPV
SN-S71C8-8F
SN-S71C8-8FE
SN-S71C8-8FESL*
SN-S71C8-8FSL*
SN-S71C8-8FV
SN-S71C8-8FVSL*
SN-S71C12-12RP
SN-S71C12-12RPV
SN-S71C12-12F
SN-S71C12-12FE
SN-S71C12-12FSL*
SN-S71C12-12FV
SN-S71C12-12FVSL*
SN-S71C16-16RPE
SN-S71C16-16RPV
SN-S71C16-20RP
SN-S71C16-16F
SN-S71C16-16FE
SN-S71C16-16FESL*
SN-S71C16-16FSL*
SN-S71C16-16FV
SN-S71C16-16FVSL*
-
* - socket with a safety locking pin preventing accidental disconnection

** - threads of stainless steel sockets are given in brackets
840
high pressure
stainless steel
SN-SH71C4-4RP
SN-SH71C4-4RPSL*
SN-SH71C4-4F
SN-SH71C4-4FESL*
SN-SH71C4-4FV
SN-SH71C6-6RP
SN-SH71C6-6RPSL*
SN-SH71C6-6F
SN-SH71C6-6FV
SN-SH71C8-8RP
SN-SH71C8-8RPSL*
SN-SH71C8-8RPV
SN-SH71C8-8F
SN-SH71C8-8FESL*
SN-SH71C8-8FSL*
SN-SH71C8-8FV
SN-SH71C12-12F
SN-SH71C12-12FSL*
SN-SH71C12-12FV
SN-SH71C16-16F
SN-SH71C16-16FESL*
-

SNAP-TITE couplings
Blank plugs/caps
size
[inch]
material
1/4
3/8
1/2
3/4
1
plastic
code
socket blank plug
SN-71PCC-4
SN-71PCC-6
SN-71PCC-8
SN-71PCC-12
SN-71PCC-16
plug blank cap

SN-71PNC-4
SN-71PNC-6
SN-71PNC-8
SN-71PNC-12
SN-71PNC-16
Operating parameters - working / bursting pressure

size
[inch]
1/8
1/4
3/8
1/2
3/4
1
2
working / bursting pressure [bar]

galvanized steel
689 / 1517
689 / 1379
689 / 1379
689 / 1379
517 / 1034
517 / 1034
344 / 689
AISI 316
344 / 862
344 / 862
344 / 862
344 / 862
275 / 689
206 / 413
high pressure stainless steel

689 / 1379
689 / 1379
689 / 1379
517 / 1034
517 / 1034
344 / 689
Operating parameters - flow, air inclusion, leakage

size
[inch]

[l/min]
air inclusion
[cm]
leakage
[cm]
1/8
1/4
3/8
1/2
3/4
1
2
2,5
21
53
86
169
247
957
0,02
0,01
0,02
0,03
0,04
0,06
30,5
0,12
0,02
0,02
0,03
0,06
0,1
5,25
Cross-section of connected quick release coupling (size from 1/4 to 1)
841
HIGH PRESSURE - rotary unions

GGIL, GG90 type
Material:
Seal:
Connection:
Working temp.:
Galvanized steel
NBR
BSP male / female thread
Straight and angular rotary unions. Used in systems that require rotary connection or to eliminate strain of hose
assemblies. Characterized by small sizes and low torque. Used in construction, agricultural and industrial machines,
lifting equipment and automotive industry.
GGIL type
GG90 (1/4 1) type
code
thread
size
[inch]
flow rate
[l/min]
ZO-GGIL-04
ZO-GGIL-06
ZO-GGIL-08
ZO-GGIL-12
ZO-GGIL-16
ZO-GGIL-20
ZO-GGIL-24
ZO-GGIL-32
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
25
45
80
120
150
200
250
300
ZO-GG90-04
ZO-GG90-06
ZO-GG90-08
ZO-GG90-12
ZO-GG90-16
ZO-GG90-20
ZO-GG90-24
ZO-GG90-32
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
25
45
80
120
150
200
250
300
842
GG90 (1.1/4 2) type
max. working
max. rotational
pressure
speed
[bar]
[r.p.m.]
Straight rotary union GGIL type
400
500
400
400
360
370
310
280
280
230
250
200
210
170
180
140
Angular rotary union GG90 type
400
500
400
400
360
370
310
280
280
230
250
200
210
170
180
140
A
[mm]
dimensions
B
C
[mm]
[mm]
D
[mm]
62
65
74
80
90
98
108
115
42
44
50
50
57
63
70
76
33
37
40
49
60
60
70
85
71
77
86
100
113
118
138
152
50
56
63
70
80
83
100
110
11
15
17
20
23
32
38
43
33
38
43
56
60
63
79
85
HIGH PRESSURE - rotary unions

TEMA SWIVEL
Body:
Female pin:
Brass
Hardened steel
(for version RF - stainless steel)
Nut:
Galvanized steel
Seal:
NBR
O-ring
expansive space
safety locking ring
Union used in systems that require rotary connection or

to eliminate stress of hose assemblies. Characterized
by small sizes and low torque. The maximum rotational
speed is (60 r.p.m.). Suitable for hydraulic oil or water
(RF version).
seal NBR
plastic ring
code
size
[inch]
I.D.
[mm]
TA-R-250
TA-R-250RF
TA-R-250W
TA-R-500
TA-R-500RF
TA-R-500B
TA-R-500W
TA-R-500W2
TA-R-500W3
TA-R-500W5
TA-R-500W6
TA-R-500-30
TA-R-500-31
TA-R-500-32
TA-R-750
TA-R-750RF
TA-R-1000
TA-R-1000RF
1/4
1/4
1/4
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
3/4
3/4
1
1
6
6
5
11
11
11
11
11
11
11
11
11
11
11
17
17
22
22
thread (1)
female
1/4
1/4
1/2
1/2
1/2
3/4
3/4
1
1
male
M16x1,5
M18x1.5
M26x1,5
M18x1.5
M22x1.5
M24x1,5
7/8-14UNF
7/8-14UNF
7/8-14UNF
-
thread (2)
female
3/8
3/8
3/4
3/4
1
1
1.1/4
1.1/4
male
M14x1,5
1/2
1/2
1/2
M22x1.5
1/2
1/2
3/4
7/8-14UNF
1/2
-
working
pressure
[bar]
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
200
200
843
HIGH PRESSURE - valves

Ball valve BKH BSP/NPT
Material:
Body
Ball
Stem
Seals:
Ball
Stem
Working temp.: PA
PTFE
NBR
FKM
- steel
- steel
- steel
- PA or PTFE
- NBR or FKM
- (from -40C up to +100C)
- (from -200C up to +250C)
2-way ball valve with BSP or NPT female thread designed for high pressure hydraulic or industrial applications. For
proper choice of a valve for fluids other than hydraulic oil or for high working temperatures, please contact TUBES
INTERNATIONAL Sales or Technical Department.
code
(PA/NBR seal)
code
(PTFE/FKM seal)
DN
[mm]
HZ-BKH-G-02
HZ-BKH-G-04
HZ-BKH-G-06
HZ-BKH-G-08
HZ-BKH-G-12
HZ-BKH-G-16
HZ-BKH-G-02-T/V
HZ-BKH-G-04-T/V
HZ-BKH-G-06-T/V
HZ-BKH-G-08-T/V
HZ-BKH-G-12-T/V
HZ-BKH-G-16-T/V
4
6
10
13
20
25
thread
size D
[inch]
1/8 BSP
1/4 BSP
3/8 BSP
1/2 BSP
3/4 BSP
1 BSP
HZ-BKH-N-02
HZ-BKH-N-04
HZ-BKH-N-06
HZ-BKH-N-08
HZ-BKH-N-12
HZ-BKH-N-16
4
6
10
13
20
25
1/8 NPT
1/4 NPT
3/8 NPT
1/2 NPT
3/4 NPT
1 NPT
work. press. work. press.

(PA/NBR) (PTFE/FKM)
[bar]
[bar]
500
100
500
100
500
100
500
100
400
100
400
100
500
500
500
500
400
400
valve
length L
[mm]
69
69
73
85
96
113
69
69
73
92
97
113
weight
[kg]
0,35
0,35
0,50
0,65
1,50
2,00
0,35
0,35
0,50
0,65
1,50
2,00
Ball valve SKH BSP

Material:
Body
Ball
Stem
Seals:
Ball
Stem
Working temp.: POM
PTFE
NBR
FKM
- steel
- steel
- steel
- PA or PTFE
- NBR or FKM
- (from -200C up to +250C)
2-way ball valve with BSP female thread designed for high pressure hydraulic or industrial applications. For proper choice
of a valve for fluids other than hydraulic oil or for high working temperatures, please contact TUBES INTERNATIONAL
Sales or Technical Department.
code
(PA/NBR seal)
code
(PTFE/FKM seal)
DN
[mm]
HZ-SKH-G-20
HZ-SKH-G-24
HZ-SKH-G-32
HZ-SKH-G-20-T/V
HZ-SKH-G-24-T/V
HZ-SKH-G-32-T/V
32
40
50
844
thread
size D
[inch]
1.1/4" BSP
1.1/2" BSP
2" BSP
work. press. work. press.

(PA/NBR) (PTFE/FKM)
[bar]
[bar]
400
63
400
63
400
63
valve
length L
[mm]
110
120
140
weight
[kg]
3,20
4,00
5,90

Ball valve BKH L/S
Material:
Body
Ball
Stem
Seals:
Ball
Stem
Working temp.: PA
NBR
- steel
- steel
- steel
- PA
- NBR
2-way ball valve with metric male thread, designed for high pressure hydraulic applications.
4
6
8
10
13
13
20
25
thread
size D
[mm]
M12x1,5
M14x1,5
M16x1,5
M18x1.5
M22x1.5
M26x1,5
M30x2
M36x2
pipe
diam. RA
[mm]
6
8
10
12
15
18
22
28
working
pressure
[bar]
500
500
500
500
500
500
400
400
valve
length L
[mm]
67
67
71
75
84
84
102
108
4
6
8
10
13
13
20
25
M16x1,5
M18x1.5
M20x1,5
M22x1.5
M24x1,5
M30x2
M36x2
M42x2
8
10
12
14
16
20
25
30
500
500
500
500
500
500
400
400
73
73
77
84
87
91
110
120
code
DN
[mm]
HZ-BKH-06L
HZ-BKH-08L
HZ-BKH-10L
HZ-BKH-12L
HZ-BKH-15L
HZ-BKH-18L
HZ-BKH-22L
HZ-BKH-28L
HZ-BKH-08S
HZ-BKH-10S
HZ-BKH-12S
HZ-BKH-14S
HZ-BKH-16S
HZ-BKH-20S
HZ-BKH-25S
HZ-BKH-30S
weight
[kg]
0,30
0,30
0,30
0,50
0,60
0,60
1,50
2,00
0,35
0,35
0,35
0,50
0,60
0,65
1,50
2,10
Ball valve SKH L/S

Material:
Body
Ball
Stem
Seals:
Ball
Stem
Working temp.: PA
NBR
- steel
- steel
- steel
- PA
- NBR
2-way ball valve with metric male thread, designed for high pressure hydraulic applications.
32
40
thread
size D
[mm]
M45x2
M52x2
pipe
diam. RA
[mm]
35
42
working
pressure
[bar]
400
400
valve
length L
[mm]
128
133
32
M52x2
38
400
140
code
DN
[mm]
HZ-SKH-35L
HZ-SKH-42L
HZ-SKH-38S
weight
[kg]
3,00
3,80
3,10
845

Ball valve BK3L BSP/NPT
Material:
Body
Ball
Stem
Seals:
Ball
Stem
Working temp.: POM
NBR
- steel
- steel
- steel
- POM
- NBR
3-way (L type) ball valve with BSP or NPT female thread, designed for high pressure hydraulic applications.
code
DN
[mm]
thread size D
[inch]
working pressure
[bar]
length L
[mm]
weight
[kg]
HZ-BK3L-G-02
HZ-BK3L-G-04
HZ-BK3L-G-06
HZ-BK3L-G-08
4
6
10
13
1/8 BSP
1/4 BSP
3/8 BSP
1/2 BSP
400
400
400
350
69
69
73
85
0,40
0,40
0,55
0,70
HZ-BK3L-N-02
HZ-BK3L-N-04
HZ-BK3L-N-06
HZ-BK3L-N-08
4
6
10
13
1/8 NPT
1/4 NPT
3/8 NPT
1/2 NPT
400
400
500
350
73
73
77
84
0,40
0,40
0,55
0,70
Ball valve SK3L BSP/NPT

Material:
Body
Ball
Stem
Seals:
Ball
Stem
Working temp.: POM
NBR
- steel
- steel
- steel
- POM
- NBR
3-way (L type) ball valve with BSP or NPT female thread, designed for high pressure hydraulic applications.
code
DN
[mm]
thread size D
[inch]
working pressure
[bar]
length L
[mm]
weight
[kg]
HZ-SK3L-G-12
HZ-SK3L-G-16
20
25
3/4" BSP
1" BSP
400
400
96
113
1,55
2,10
HZ-SK3L-N-12
HZ-SK3L-N-16
20
25
3/4" NPT
1" NPT
400
400
97
113
1,55
2,10
846

Ball valve MKHX BSP
Material:
Body - steel
Ball
- steel
Stem - steel
Ball
- POM
Seals:
Stem - NBR
4-way (X Type) ball valve with BSP female thread, designed for high pressure hydraulic applications.
code
DN
[mm]
HZ-MKHX-06-G-02
HZ-MKHX-06-G-04
HZ-MKHX-06-G-06
HZ-MKHX-06-G-08
HZ-MKHX-06-G-12
HZ-MKHX-06-G-16
4
6
10
13
20
25
thread
size D
[inch]
1/8
1/4
3/8
1/2
3/4
1
thread
length i
[mm]
8
12
12
14
16
18
valve
length L
[mm]
100
100
115
135
148
172
working
pressure
[bar]
500
500
500
400
400
350
weight
[kg]
2,10
2,10
2,90
4,50
7,20
9,70
Ball valve HBKH

Material:
Body - steel
Ball
- steel
Stem - steel
Seals:
Ball
- POM
Stem - NBR
Special 2-way ball valve with male metric thread. Used in hydraulic systems as a stroke limitation on hydraulic
actuators.
code
DN
[mm]
HZ-HBKH-12L-B
HZ-HBKH-15L-B
13
13
thread
size
[mm]
M18x1.5
M22x1.5
distance between
assembly holes
[mm]
37,5
37,5
assembly holes
diameter
[mm]
6,5
6,5
working
pressure
[bar]
500
500
847

Hand switching valve D3V
Material:
Body - iron casting

Stem - hardened steel
NBR
Seal:
Hand switching 3-way valve used in hydraulic systems to control fluid flow direction. Controlled by manual lever.
code
DC-D3V-06
DC-D3V-08
DC-D3V-12
DC-D3V-16
thread
size
[inch]
3/8
1/2
3/4
1
working
pressure
[bar]
250
250
250
250
bursting
pressure
[bar]
1000
1000
1000
1000
D1
[mm]
D2
[mm]
8,5
11
11
11
25
32
32
32
Controlled check valve FPD

Material:
Body - galvanized steel

Springs - hardened steel
Seal:
NBR
Controlled check valve (hydraulic lock), FPD type, applied in hydraulic systems to prevent automatic drop of an
actuator. Standard opening pressure: 2 bar (5 and 10 bar available).
Allowable flow directions:
V1
C1 and simultaneously C2
V2,

V2
C2 and simultaneously C1
V1.
code
DC-FPD-04
DC-FPD-06-20L*
DC-FPD-06
DC-FPD-08
DC-FPD-12
thread
size
[inch]
1/4
3/8
3/8
1/2
3/4
* - a valve without assembly holes.
848
working
pressure
[bar]
350
300
300
300
280
bursting
pressure
[bar]
1400
1200
1200
1200
1000
flow rate
[l/min]
weight
[kg]
12
20
30
45
85
0,65
0,62
1,75
1,78
3,25

Check valve FPR
Material: Body - galvanized steel
Seal:
Check valves, FPR type, designed for closing hydraulic fluid flow in one direction and opening free hydraulic fluid
flow in the opposite direction. Standard opening pressure: 0.5 bar ( 2.5; 5 and 10 bar available).
Allowable flow direction: A
A1.
code
DC-FPR-04
DC-FPR-06
DC-FPR-08
DC-FPR-12
DC-FPR-16
DC-FPR-20
DC-FPR-24
thread
size
[inch]
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
working
pressure
[bar]
350
350
320
300
250
250
210
bursting
pressure
[bar]
1400
1400
1280
1200
1000
1000
840
flow rate
[l/min]
weight
[kg]
12
30
45
85
140
200
310
0,10
0,17
0,22
0,45
0,97
1,68
2,10
Check valve FPRI

Material:
Body - steel
NBR
Seal:
Check (cartridge) valve, FPRI type, designed for closing hydraulic fluid flow in one direction and opening free
hydraulic fluid flow in the opposite direction. Standard opening pressure: 1 bar.
A1.
code
DC-FPRI-04
DC-FPRI-06
DC-FPRI-08
DC-FPRI-12
thread
size
[inch]
1/4
3/8
1/2
3/4
working
pressure
[bar]
350
350
350
300
bursting
pressure
[bar]
1400
1400
1400
1200
flow rate
[l/min]
weight
[kg]
15
30
45
80
0,015
0,025
0,040
0,070
849

Throttle valve FPMB
Material:
NBR
Seal:
Adjustable throttle valve, FPMB type, used in hydraulic systems to control a flow rate. The flow rate is controlled
by a rotary ring.
A1, A1
A.
code
DC-FPMB-04
DC-FPMB-06
DC-FPMB-08
DC-FPMB-12
DC-FPMB-16
thread
size
[inch]
1/4
3/8
1/2
3/4
1
working
pressure
[bar]
350
350
310
280
250
bursting
pressure
[bar]
1400
1400
1240
1120
1000
flow rate
[l/min]
weight
[kg]
12
30
45
85
150
0,28
0,43
0,63
1,05
1,96
Throttle check valve FPMU

Material:

Seal:
NBR
Throttle check valves, FPMU type, used in hydraulic systems to open a free flow in one direction. The flow, throttled in
the opposite direction, is controlled by a rotary ring. Standard opening pressure: 0.5 bar (2,5; 5 and 10 bar available).
A1 (free), A1
A (throttled).
code
DC-FPMU-04
DC-FPMU-06
DC-FPMU-08
DC-FPMU-12
DC-FPMU-16
850
thread
size
[inch]
1/4
3/8
1/2
3/4
1
working
pressure
[bar]
350
350
310
280
250
bursting
pressure
[bar]
1400
1400
1240
1120
1000
flow rate
[l/min]
weight
[kg]
12
30
45
85
150
0,28
0,43
0,63
1,05
1,96

Throttle valve FPSB
Material:

Knob - steel
NBR
Seal:
Adjustable throttle valve, FPSB type, used in hydraulic systems to control a flow rate. The flow rate is controlled
by a handwheel.
A1, A1
A.
code
DC-FPSB-04
DC-FPSB-06
DC-FPSB-08
thread
size
[inch]
1/4
3/8
1/2
working
pressure
[bar]
300
300
280
bursting
pressure
[bar]
1200
1200
1120
flow rate
[l/min]
weight
[kg]
12
20
25
0,30
0,31
0,31
Throttle check valve FPSU

Material:

Spring - steel
Ball
- steel
Knob - steel
Seal:
NBR
Throttle check valve, FPSU type, used in hydraulic systems to open free flow in one direction. The flow, throttled
in the opposite direction, is controlled by a rotary ring. Standard opening pressure: 0.5 bar.
A1 (free), A1
A (throttled).
code
DC-FPSU-04
DC-FPSU-06
DC-FPSU-08
thread
size
[inch]
1/4
3/8
1/2
working
pressure
[bar]
300
300
280
bursting
pressure
[bar]
1200
1200
1120
flow rate
[l/min]
weight
[kg]
12
25
40
0,31
0,31
0,31
851

Throttle valve FPB
Material:

Wheel - plastic
Seal:
NBR
Characteristics: Adjustable throttle valve, FPB type, used in hydraulic systems to control a flow rate. The flow
rate is controlled by a wheel.
A1, A1
A.
code
DC-FPB-04
DC-FPB-06
DC-FPB-08
DC-FPB-12
thread
size
[inch]
1/4
3/8
1/2
3/4
working
pressure
[bar]
300
300
280
250
bursting
pressure
[bar]
1200
1200
1120
1000
flow rate
[l/min]
weight
[kg]
12
30
45
85
0,21
0,35
0,50
0,87
Throttle check valve FPU

Material:

Spring - steel
Stem - steel
Knob - plastic
Seal:
NBR
Characteristics: Throttle check valve, FPSU type, used in hydraulic systems to open free flow in one direction.
The flow, throttled in the opposite direction, is controlled by a rotary ring. Standard opening
pressure: 0.5 bar (2.5, 5 and 10 bar available).
A1 (free), A1
A (throttled).
DC-FPU-04
DC-FPU-06
DC-FPU-08
DC-FPU-12
thread
size
[inch]
1/4
3/8
1/2
3/4
working
pressure
[bar]
300
300
280
250
bursting
pressure
[bar]
1200
1200
1120
1000
picture
code
valve size
[inch]
thread size
[mm]
description
DC-TP-04
DC-TP-06
DC-TP-08
DC-TP-12
1/4
3/8
1/2
3/4
M20x1
M25x1,5
M30x1,5
M35x1,5
Tightening nut designed for mounting valves of FPB or FPU type.

Material: galvanized steel.
code
852
flow rate
[l/min]
weight
[kg]
12
30
45
85
0,25
0,42
0,60
1,10

Shut-off valve FPE
Material:
Body - nickel plated brass

Wheel - plastic
Seal:
NBR
Connection:
BSP female thread
Characteristics: FPE type valve with M connection for a pressure gauge, used in hydraulic systems to shut off
a pressure gauge from installation.
The valve must be connected with an adaptor FPE/FPEA.
code
thread size
[inch]
working pressure
[bar]
weight
[kg]
DC-FPE-04
1/4
350
0,17
Shut-off valve FPEA

Material:
Body - nickel plated brass

Wheel - plastic
Seal:
NBR
Connection:
BSP female thread
Characteristics: FPEA type valve with M connection for a pressure gauge, used in hydraulic systems to shut off
a pressure gauge from installation.
The valve must be connected with an adaptor FPE/FPEA.
code
thread size
[inch]
working pressure
[bar]
weight
[kg]
DC-FPEA-04
1/4
350
0,16
Adaptor FPE / FPEA

Material:
Galvanized steel
Characteristics: Adaptor for optional use with shut-off valves, both FPE and FPEA types. Allows to assemble
the valve in any position.
code
thread size 1
[inch]
thread size 2
[inch]
working pressure
[bar]
DC-FPE/FPEA
1/4 BSPT
1/4 BSP
350
853

Safety valve FFP, MFP
Material: Galvanized steel
Characteristics: Safety valve secures hydraulic system from oil leakage in case of sudden depressurisation
(e.g. failure of hose assembly).
Allowable flow direction: A1
A2 (valve), A2
A1 (without valve).
854
code
thread
size
[inch]
DC-FFP-04
DC-FFP-06
DC-FFP-08
DC-FFP-12
DC-FFP-16
1/4
3/8
1/2
3/4
1
DC-MFP-04
DC-MFP-06
DC-MFP-08
DC-MFP-12
DC-MFP-16
1/4
3/8
1/2
3/4
1
working
bursting
pressure
pressure
[bar]
[bar]
FFP type (BSP female thread)
350
1400
350
1400
350
1400
350
1400
300
1200
MFP type (BSP male thread)
350
1400
350
1400
350
1400
350
1400
300
1200
flow rate
[l/min]
weight
[kg]
25
50
80
150
200
0,08
0,11
0,18
0,40
0,88
25
50
80
150
200
0,08
0,12
0,21
0,41
0,86
Release valve TEMA TA

Material:
Body - zinc-plated steel

Valve - chrome-plated brass
Seal:
NBR
Manual valve allows to release the excess of oil in installation back to the tank and to reduce the oil pressure in
the installation with a valve. Mounted between the part of the system with quick release couplings and feeding part
of the system (under pressure). After releasing the excess of hydraulic oil, connection of quick release couplings
becomes possible.
DN
[mm]
thread
size G
[inch]
SW
[mm]
L
[mm]
D
[mm]
working
press.
[bar]
TA-V-TA38
10
3/8
21
62
33
250
TA-V-TA50
13
1/2
25
70
33
250
TA-V-TA75
20
3/4
32
73
33
250
TA-V-TA100
25
38
77
33
250
TA-V-TA38-IW
10
3/8
28
60
33
250
TA-V-TA50-IW
13
1/2
28
66
33
250
TA-V-515
1/2
33
250
TA-V-515RV *
1/2
33
250
code
* - stainless steel valve with Viton seal.
855

Hydraulic directional control valves
VDM6 type
Material:
Body - cast iron

Spools - nickel plated hardened steel
Seal:
NBR
Flow rate:
45 l/min
Liquids viscosity:
From 10 cSt up to 400 cSt
(recommended 12 75)
Max. working press.: 350 bar
Working temp.:
Monoblock spool directional control valves designed for hydraulic systems used in cranes, hoists, construction,
agricultural and industrial machines. Equipped with double-acting actuator spools as a standard. Spools for singleacting and hydraulic actuators are assembled on request.
code
number of
working section
type of control
overflow valve
SA-623100010
SA-623100020
SA-623100030
SA-623100040
1
2
3
4
lever
lever
lever
lever
yes (175 bar)

yes (175 bar)
yes (175 bar)
yes (175 bar)
pump
3/8
3/8
3/8
3/8
connection
[BSP]
tank
1/2
1/2
1/2
1/2
receiver
3/8
3/8
3/8
3/8
Other types of hydraulic directional control valves
VDM8
856
VD6A
type
version
VDM8
VD6A
VD8A
VD10A
VD12A
monoblock
sectional
sectional
sectional
sectional
VD8A
nominal flow rate
[l/min]
75
45
75
115
170
VD10A, VD12A
maximum press.
[bar]
350
350
350
280
280
max. number of the

working section
5
8
8
8
8

Hydraulic directional control valves
YFM35, YFM55 type
Material:
Body - cast iron

Spools - hardened steel
Seal:
NBR
Max. return pressure: 25 bar
Working temp.:
Monoblock spool directional control valve with a manual lever and centring springs. Designed for hydraulic systems
used in cranes, hoists, construction, agricultural and industrial machines. Equipped with C type safety valve (set
at 140 bar) and type 1 spool as a standard.
number of
work. sections
code
safety valve
type
connection port size
nominal
flow
P (pump)
T (tank)
A, B (receiver)
3/8 BSP
female thread
3/8 BSP
female thread
3/8 BSP
female thread
1/2 BSP
female thread
1/2 BSP
female thread
1/2 BSP
female thread
YFM35 type
TL-YFM35/1-C-1
TL-YFM35/2-C-11
TL-YFM35/3-C-111
TL-YFM35/4-C-1111
TL-YFM35/5-C-11111
TL-YFM35/6-C-111111
1
2
3
4
5
6
45 l/min
YFM55 type
TL-YFM55/1-C-1
TL-YFM55/2-C-11
TL-YFM55/3-C-111
TL-YFM55/4-C-1111
TL-YFM55/5-C-11111
TL-YFM55/6-C-111111
1
2
3
4
5
6
60 l/min
safety valve types

A type
(without a valve)
B type
(40 80 bar)
C type
(63 200 bar)
D type
(160 315 bar)
slide types
1 type
2 type
3 type
Code structure
YFM35 / 2 - B - 1
hydr. directional
control valve type
no. working
sections
safety valve
type
section 1
slide type
section 2
slide type
857

Hydraulic directional control valve
YE45 type
Material:
Body - iron cast

Spools - hardened steel
Seal:
NBR
Max. return pressure: 25 bar
Control voltage:
12V DC
Working temp.:
Monoblock spool directional control valve with electrically controlled centring springs. Designed for hydraulic systems used in cranes, hoists, construction, agricultural and industrial machines. Equipped with C type safety valve
(set at 140 bar) and type 1 spools.
code
TL-YE45/1-C-1
TL-YE45/2-C-11
TL-YE45/3-C-111
TL-YE45/4-C-1111
TL-YE45/5-C-11111
TL-YE45/6-C-111111
number of
work. sections
safety valve
type
nominal
flow
1
2
3
4
5
6
45 l/min
connection port size

P (pump)
T (tank)
A, B (receiver)
3/8 BSP
female thread
3/8 BSP
female thread
3/8 BSP
female thread
safety valve types

A type
(without valve)
B type
(40 80 bar)
C type
(63 200 bar)
D type
(160 315 bar)
slide types
1 type
2 type
3 type
code structure
YE45
hydr. directional
control valve type
858
no. working
sections
/ 4 - B - 1
safety valve
type
section 1
slide type
3
section 2
slide type
1
section 1
slide type
section 2
slide type

Hydraulic directional control valve
NG6, NG10 type
Material:
Body - steel
Spool - hardened steel
Seal:
NBR
Control voltage:
24V DC
Working temp.:
Monoblock spool directional control valve, electrically controlled, with centring springs designed for panel mounting. Used in hydraulic systems of industrial machines. Supplied with O-rings and mounting screws as a standard.
Plugs are equipped with LEDs indicating status of power supply.
code
nominal flow
slide type
main view
NG6 type
TL-NG6-E-24DC
TL-NG6-G-24DC
TL-NG6-H-24DC
TL-NG6-J-24DC
TL-NG6-HA-24DC
TL-NG6-D-24DC
E
G
H
J
HA
D
60 l/min
NG10 type
TL-NG10-E-24DC
TL-NG10-G-24DC
TL-NG10-H-24DC
TL-NG10-J-24DC
TL-NG10-HA-24DC
TL-NG10-D-24DC
E
G
H
J
HA
D
120 l/min
slide type
E type
G type
H type
J type
HA type
D type
Code structure
NG10 - E hydr. directional

control valve type
slide type
24DC
control voltage
859

Assembly plates PNG6, PNG10
Material:
Steel
Panel mounting plates PNG6 and PNG10 allows to connect valves designed for plate mounting with high pressure
hose assemblies.
picture
type
connection
port size
description
PNG6
3/8
BSP female
For connection of directional valve

NG6 type with hose assemblies.
Connection ports located on the
bottom part of the plate.
PNG6
3/8
BSP female

side parts of the plate.
TL-PNG10-D12
PNG10
1/2
BSP female

bottom part of the plate.
code
1 type
2 type
description
TL-PNG10/6
PNG10
PNG6
code
TL-PNG6-D38
TL-PNG6-B38
picture
860
Adaptor PNG10 / PNG6
HIGH PRESSURE- pumps

Gear pumps SALAMI
2 PE group
Material:
Body
- aluminium
Mounting plate - cast iron
Rear cover
- cast iron
Seal:
NBR (Viton - option)
Liquid viscosity: from 12 cSt to 800 cSt (recommended 17 65)
Displacement external gear pumps, designed for hydraulic systems in machines and devices. Available as a single
or multi-stream pump.
code
SA-2PE4,5D-P60P1 **
SA-2PE6,2D-P60P1 **
SA-2PE8,3D-P28P1
SA-2PE8,3D-P60P1 **
SA-2PE11,3D-P28P1
SA-2PE13,8S-B25B1
SA-2PE16D-B25B1
SA-2PE16/11,3S-B25B5
SA-2PE19D-P28P1
SA-2PE22,5D-P28P1
unit efficiency
[cm3/rev]
nominal efficiency*
[l/min]
4,6
6,5
8,2
8,2
11,5
13,8
16,6
16,6 / 11,5
19,4
22,9
6,6
9,3
11,7
11,7
16,4
19,7
23,7
23,7 / 16,4
27,6
32,6
nominal
rotational speed
[r.p.m.]
1500
1500
1500
1500
1500
1500
1500
1500
1500
1500
max. working
pressure
[bar]
250
250
250
250
250
250
250
250 / 250
220
200
* - estimated efficiency at nominal rotational speed

** - rear pump designed for mounting of multi-stream pump
Code structure of 2 PE type pumps
Size
Function
P - pump
M - motor
8,3
D - P
Series
28
P1
Base plate
Direction of rotation
D - clockwise
S counter clockwise
R- reversible
P1 - European standard
B1 - German standard 80
B2-B3 - German standard 52
B4-B5 - German standard 50
S2 - SAE A for 2 screws
S6 - SAE A 2 screws (O-ring)
K1 - 4 bolts to Perkins engine
Type - efficiency
4,5 - 4,6 cm3/rev

6,2 - 6,5 cm3/rev
8,3 - 8,2 cm3/rev
4,5 - 4,6 cm3/rev
10,5 - 10,6 cm3/rev
11,3 - 11,5 cm3/rev
12,5 - 12,5 cm3/rev
13,8 - 13,8 cm3/rev
16 - 16,6 cm3/rev
19 - 19,4 cm3/rev
22,5 - 22,9 cm3/rev
26 - 25,8 cm3/rev
Inlet and outlet
P - European
B - German
G - British (BSP)
R - American (UNF)
Drive shaft
02 - tang drive for diesel motor

03 - tang drive for electric motor
25 - 1:5 tapered
28 - 1:8 tapered
52 - SAE A9T 16/32 DP splined
54 - SAE A11T 16/32 DP splined
60 - DIN 5480 splined hole
62 - 9 teeth DIN 5482 splined
82 - SAE A 5/8
85 - SAE A 3/4
861

Gear pumps SALAMI
3 PB group
Material:
Body
- aluminium
Base plate - aluminium
Rear cover - iron cast
Seal:
NBR (Viton - option)
Liquid viscosity: From 12 cSt to 800 cSt (recommended 17 65)
Displacement external gear pumps, designed for hydraulic systems in machines and devices. Available as a single
or multi-stream pump.
code
unit efficiency
[cm3/rev]
nominal efficiency*
[l/min]
SA-3PB38D-P38P2
SA-3PB46D-P38P2
SA-3PB55D-P38P2
38,7
46,9
54,1
55,1
66,8
77,1
nominal
rotational speed
[r.p.m.]
1500
1500
1500
max. working
pressure
[bar]
250
245
220
* - estimated efficiency at nominal rotational speed
Code structure of 3 PB type pumps
Size
Function
P - pump
M - motor
Type - efficiency
21 - 20,6 cm3/rev
27 - 27 cm3/rev
33 - 33,5 cm3/rev
38 - 38,7 cm3/rev
46 - 46,9 cm3/rev
55 - 54,1 cm3/rev
65 - 63,1 cm3/rev
75 - 73,4 cm3/rev
862
38
D - P
Series
38
P2
Base plate
Direction of rotation
D - clockwise
S - counter clockwise.
R - reversible
Inlet and outlet
P - European
B - German
G - British (BSP)
R - American (UNF)
P2 - European standard 50.8

P3 - European standard 60.3
B6 - German standard 105
S3 - SAE B for 2 screws 101.6
Z1 - 4 screws to the gearbox
ZF 80 type
Drive shaft
05 - tang drive for electric motor

35 - 1:5 tapered
38 - 1:8 tapered
48 - 1:8 tapered (only with P3)
55 - SAE B13T 16/32 DP splined
56 - SAE B15T 16/32 DP splined
63 - DIN 5482 splined
66 - DIN 5462 splined
87 - SAE B 7/8
88 -SAE BB 1

Flange connectors
Material:
Zinc-plated steel (standard), AISI 316L steel (option)
Working temp.: From -20C up to +100C (NBR seal), from -20C up to +200C (Viton seal)
Compact flange connectors with square flange heads, bolt circle diameter from 26 mm up to 72.5 mm with metric
and BSP threads used to connect hydraulic pumps. Equipped with a set of bolts, washers and O-rings as a standard.
Flange connector with 4 bolt holes / DIN 2353
press.
[bar]
315
HK-A-35-10L
10
thread
size
[mm]
16x1,5
HK-A-35-12L
12
18x1,5
15
22x1,5
250
HK-A-90-35-15L
315
code
bolt circle
diameter
[mm]
pipe O.D
[mm]
35
250
HK-A-35-15L
315
HK-A-35-16S
16
24x1,5
HK-A-40-15L
15
22x1,5
HK-A-40-18L
18
26x1,5
100
250
100
250
HK-A-40-20S
20
30x2
HK-A-40-22L
22
30x2
HK-A-40-28L
28
36x2
HK-A-55-20S
20
30x2
HK-A-55-25S
25
36x2
30
42x2
35
45x2
HK-A-55-30S
100
90 flange connector with 4 bolt holes / DIN 2353
40
55
HK-A-55-35L
bolt
size
[mm]
315
4xM6
100
4xM8
300
HK-A-BZ-30-08
bolt circle
diameter
[mm]
30
thread
size
[inch]
1/2
bolt
size
[mm]
4xM6
HK-A-BZ-40-12
40
3/4
4xM8
HK-A-BZ-51-16
51
HK-A-BZ-56-16
56
code
100
250
Square flange connector with 4 bolt holes / BSP male

thread 60
press.
[bar]
press.
[bar]
4xM10
250
10
thread
size
[mm]
16x1,5
12
18x1,5
15
22x1,5
HK-A-90-35-16S
16
24x1,5
HK-A-90-40-15L
15
22x1,5
HK-A-90-40-18L
18
26x1,5
code
bolt circle
diameter
[mm]
pipe O.D
[mm]
HK-A-90-35-10L
HK-A-90-35-12L
HK-A-90-40-20S
35
20
30x2
HK-A-90-40-22L
40
22
30x2
HK-A-90-40-28L
28
36x2
HK-A-90-55-20S
20
30x2
HK-A-90-55-25S
25
36x2
HK-A-90-55-30S
30
42x2
35
45x2
55
100
HK-A-90-55-35L
250
HK-A-90-55-38S
38
52x2
100
HK-A-90-55-42L
42
52x2
bolt
size
[mm]
4xM6
4xM8
Square flange connector with 4 bolt holes / BSP

female thread
press.
[bar]
300
HK-A-BW-30-06
bolt circle
diameter
[mm]
30
thread
size
[inch]
3/8
bolt
size
[mm]
4xM6
HK-A-BW-40-08
40
1/2
4xM8
HK-A-BW-51-12
51
3/4
HK-A-BW-56-12
56
3/4
code
4xM10
863

Flange connectors
90 flange connector with 4 bolt holes / BSP male
thread 60
press.
[bar]
code
bolt circle
diameter
[mm]
thread
size
[inch]
3/8
35
1/2
HK-A-BZ-90-35-06
315
250
315
HK-A-BZ-90-35-08
HK-A-BZ-90-35-12
3/4
HK-A-BZ-90-40-06
3/8
HK-A-BZ-90-40-08
HK-A-BZ-90-40-12
40
315
HK-A-BW-90-30-06-AL
HK-A-BW-90-30-08-AL
HK-A-BW-90-35-06-AL
180
HK-A-BW-90-35-08-AL
HK-A-BW-90-40-08-AL
HK-A-BW-90-40-12-AL
HK-A-BW-90-55-12-AL
HK-A-BW-90-55-16-AL
864
HK-A-BW-90-35-08
4xM6
250
HK-A-BW-90-40-08
HK-A-BW-90-55-08
1/2
code
HK-A-BW-90-35-06
3/4
bolt circle
diameter
[mm]
35
HK-A-BW-90-40-06
315
HK-A-BW-90-55-12
thread
size
[inch]
3/8
40
bolt
size
[mm]
1/2
3/8
4xM6
1/2
3/4
1/2
55
HK-A-BW-90-55-16
3/4
4xM8
4xM8
90 flange connector with 4 bolt holes / BSP female

thread (aluminium)
press.
[bar]
code
HK-A-BW-90-40-12
HK-A-BZ-90-55-08
55
press.
[bar]
3/4
1
HK-A-BZ-90-55-16
bolt
size
[mm]
1/2
HK-A-BZ-90-40-16
HK-A-BZ-90-55-12

thread
bolt circle
diameter
[mm]
30
35
40
55
thread
size
[inch]
3/8
bolt
size
[mm]

thread (aluminium)
press.
[bar]
HK-B-BW-90-26-06-AL
HK-B-BW-90-26-08-AL
1/2
3/8
1/2
180
HK-B-BW-90-30-08-AL
HK-B-BW-90-40-08-AL
HK-B-BW-90-40-12-AL
3/4
1
HK-B-BW-90-30-06-AL
4xM6
1/2
3/4
code
4xM8
HK-B-BW-90-51-12-AL
HK-B-BW-90-51-16-AL
bolt circle
diameter
[mm]
26
30
40
51
thread
size
[inch]
3/8
1/2
3/8
1/2
1/2
3/4
3/4
1
bolt
size
[mm]
3xM5
3xM6
3xM8
3xM10

Flange connectors
thread
press.
[bar]
code
HK-B-BW-90-26-06
HK-B-BW-90-26-08
HK-B-BW-90-30-06
HK-B-BW-90-30-08
HK-B-BW-90-40-08
HK-B-BW-90-40-12
300
HK-B-BW-90-51-12
HK-B-BW-90-51-16
HK-B-BW-90-56-12
HK-B-BW-90-56-16
HK-B-BW-90-62-16
HK-B-BW-90-62-20
HK-B-BW-90-72-20
HK-B-BW-90-72-24
bolt circle
diameter
[mm]
26
30
40
51
56
62
72,5
thread
size
[inch]
3/8
1/2
3/8
1/2
1/2
3/4
bolt
size
[mm]
3xM5
3xM6
3xM8
3/4
1
3/4
3xM10
1
1
1.1/4
1.1/4
3xM12
1.1/2
865
HIGH PRESSURE - UHP equipment

UHP (Ultra High Pressure) equipment includes hoses, hose assemblies, fittings, adaptors and accessories designed
to operate under pressure of 700 bar or above. The range comprises: WATERBLAST rubber hoses (working pressure from 700 to 1250 bar), thermoplastic hoses (working pressure 700 800 bar), SPIR STAR hoses (working
pressure to 3200 bar). Depending on application, these working pressures values are obtained at different safety
factors (WATERBLAST n = 2.5, hydraulics n = 4, gases n = 4 to 6). The selection of UHP fittings, adaptors, quick
release couplings and crimping method must always be determined by pressure in a particular application. Hose
assemblies must always be pressure tested.
WATERBLAST hoses
WATERBLAST
Internal layer:
Black oil-resistant synthetic rubber
Reinforcement: Four or six steel wire spirals
External layer: Black synthetic rubber resistant to oil
and abrasion
(temporary from -40C up to +100C)
Characteristics: Hose designed for water installations and high pressure equipment. Used in water jet cutting
and water jet cleaning equipment. Application: cleaning of chemical and power supply installations, cleaning and cutting of concrete constructions, road surface, cleaning of steel surface,
steelworks, tanks, vessels, mining installations, etc.
WATERBLAST hoses should not be used for oil hydraulics.
As high temperatures strongly affect the properties of rubber, the working pressure should be
reduced down to about 80% of nominal pressure at a temperature above +70C and to about
60% at a temperature of +90C and above. Safety factor: about 2.5.
WATERBLAST 4
code
SL-WBL4-10
SL-WBL4-13
SL-WBL4-19
SL-WBL4-25
I.D.
[inch]
3/8
1/2
3/4
1
[mm]
9,5
12,7
19
25,4
O.D.
[mm]
21,3
24,6
32
38,4
working
pressure
[bar]
850
800
750
700
bursting
pressure
[bar]
2125
2000
1850
1700
bending
radius
[mm]
150
180
220
300
working
pressure
[bar]
1250
1250
1100
1100
bursting
pressure
[bar]
3125
3125
2750
2750
bending
radius
[mm]
200
210
230
250
working
pressure
[bar]
1400
bursting
pressure
[bar]
3500
bending
radius
[mm]
230
weight
[kg/m]
0,76
0,89
1,52
2,10
WATERBLAST 4 PLUS
code
SL-WBL4P-06
SL-WBL4P-10
SL-WBL4P-13
SL-WBL4P-19
I.D.
[inch]
1/4
3/8
1/2
3/4
[mm]
6,4
9,5
12,7
19
O.D.
[mm]
17,6
21,4
24,6
32
weight
[kg/m]
0,61
0,88
1,22
1,83
WATERBLAST 45
code
SL-WBL45-13
866
I.D.
[inch]
1/2
[mm]
12,7
O.D.
[mm]
29
weight
[kg/m]
1,91

WATERBLAST hoses standard fittings
1/4
3/8
1/2
1/4
3/8
1/2
1/4
TI-WBW110-04-04
TI-WBZ110-04-04
-
hose I.D.
3/8
TI-WBW110-06-06
TI-WBZ110-06-06
-
1/2
TI-WBW110-08-08 *
TI-WBZ110-08-08 *
metric female thread

(24 cone)
O-ring, DKOL
M22x1.5
TI-WMW121-22-06
TI-WMW121-22-08 *

(24 cone)
O-ring, DKOS
M20x1,5
M22x1.5
M24x1,5
TI-WMW122-20-06
TI-WMW122-22-06
-
TI-WMW122-22-08 *
TI-WMW122-24-08 *
M22x1.5
TI-WMW111-22-08 *
M24x1,5
TI-WMZ112-24-08 *
fitting
thread size
BSP female thread

(60 cone)
BSP male thread
(60 cone)

(24 cone)
without O-ring, DKL
metric male thread
(24 cone)
CES
* - for SL-WBL hoses add SL at the end of a code.

Fitting material: galvanized carbon steel.
Other types of fittings available on request.
Safety guidelines for operators of WATERBLAST hoses:
- High water pressure is dangerous - can cause death, body injury or property damage. Always wear protective
clothing, glasses, gloves and shoes.
- Hose assemblies can only be operated by trained personnel.
- Operation area must be safe from third party and marked properly.
- Never use a hose above its working pressure and below its minimal bending radius.
- Always visually check an assembly before operation.
- Never use hoses with corroded, leaking, worn or damaged fittings. Such a hose must be removed from service
immediately.
- Hose assemblies with blisters, cuts or exposed reinforcement must be removed from service.
- Do not use a hose with kinks, squeezes or other signs of damage. It must be removed from service.
- Do not use a hose that has been exposed to chemical attack or to high temperature. It must be removed from
service.
- While in service, a hose should not be exposed to kinking, twisting, straining or contact with sharp edges.
- Hose may change in length by a few per cent when pressurized. Allowance should be made to provide slack
to compensate for any changes in length.
- Several hose lengths can be joined up using high pressure couplings. It is not recommended to hang connected
pieces or suspend a hose under its own weight.
- Always clean, drain and coil hoses after use.
Complete WATERBLAST hose assemblies

TUBES INTERNATIONAL provides complete WATERBLAST hose assemblies. Each hose assembly is hydrostatically tested under pressure (150% of its working
pressure) and is supplied with a quality certificate.
867

Thermoplastic hoses UHP (700 bar)
Thermoplastic hoses are designed for pressure not exceeding 800 bar. The external layer is made of abrasion
resistant polyurethane, internal layer of polyester or polyamide reinforced by max 3 layers of steel or aramid fibre.
Widely used in hydraulic systems, rescue equipment, lifts and pumps for hydraulic oil, paints, solvents, isocyanines
and polyols. Working temperature ranges from -40 C up to 100C (for water and water-based liquids max. +65C).
Use P type ferrules (IT-23, IT-72).
code
1 type
(STANDARD)
UH-OL8M-06*
UH-MTKH-06
UH-352-06
UH-0412-06
UH-352-10
UH-0414-10
2 type
(TWIN)
UH-MTKHB-06
UH-1412-06
UH-1414-10
3 type
(NON CONDUCTIVE)
UH-OL8MNC-06
UH-0462-06
4 type
(MARINE)
UH-OL8MMARINE-06*
UH-MTKHMARINE-06
UH-0402-06
UH-0404-10
5 type
(CHEMICAL)
UH-MTK-06
UH-0482-06
UH-MTKM-10
UH-0484-10
6 type
(ANTISTATIC)
UH-AS8M-06
7 type
(EXTRA)
UH-0802-06
868
I.D.
[mm]
O.D.
[mm]
working
pressure
[bar]
bursting
pressure
[bar]
bending
radius
[mm]
weight
[kg/100 m]
ferrule
Hose intended for high pressure hydraulic systems. Internal layer: polyester. Reinforcement: aramid
fibre layer + steel layer. External layer: black polyurethane.
* - hose reinforced with two aramid fibre layers.
6,4
6,4
6,6
6,6
10
9,8
14,8
14,5
14,2
12,7
19,1
18,7
700
2800
50
40
38
35
95
90
15,90
26,00
23,20
18,50
35,20
33,00
P852
P352
Twin hose comprises two STANDARD type hoses. Internal layer: polyester. Reinforcement: aramid
6,4
6,6
9,8
14,5
12,7
18,7
700
2800
40
35
90
52,00
37,00
66,00
P352
Non-conductive hose according to SAE 100 R8 standard less than 50 A leakage when subjected to
246 kV/m for 5 min., used near electrical installations. Internal layer: polyester. Reinforcement: two
aramid fibre layers. External layer: orange polyurethane.
6,4
6,6
14,8
14
700
2800
50
35
15,90
14,50
P852
Hose resistant to sea water, used in marine industry. Internal layer: polyester. Reinforcement: aramid
* - hose reinforced with two aramid fibre layers.
6,4
6,4
6,6
9,8
14,8
14,5
12,7
18,7
700
2800
50
40
35
90
15,90
25,30
18,00
33,00
P352
Hose used to transfer aggressive chemicals, such as paint, solvents. Internal layer: polyamide. Reinforcement: aramid fibre layer + steel layer. External layer: black polyurethane.
6,4
6,6
9,5
9,8
14,5
12,7
18,8
18,7
700
2800
40
35
90
90
25,10
18,00
37,30
32,00
P352
Antistatic hose (R < 3x104 /m) designed for non-conductive media transfer. Internal layer: polyamide. Reinforcement: two aramid fibre layers. External layer: blue polyurethane.
6,4
14,8
700
2800
50
15,00
P852
Hose for hydraulic systems working under 800 bar pressure. Internal layer: polyester. Reinforcement:
two aramid fibre layers + steel layer. External layer: black polyurethane.
6,6
14,3
800
3200
35
24,50
P352

UHP (700 bar) fittings for thermoplastic hoses
TI-P (700, 800 bar)
Crimping ferrules
hose
I.D.
[inch]
1/4
3/8
TI-P (700, 800 bar)
thread
size
[inch]
hose
I.D.
[inch]
1/4
3/8
3/8
1/4
1/4
3/8
TI-P (700, 800 bar)
thread
size
[mm]
M12x1,5
M14x1,5
M16x1,5
M18x1.5
1/8 - 27
1/4 - 18
3/8 - 18
1/2 - 20
9/16 - 18
3/8 - 18
ferrule I.D.
14,6 mm
19,9 mm
code
TI-P852-04
-
ferrule I.D.
16 mm
-
AGR
DKR
code
TI-PBZ110-04-04
TI-PBZ110-06-06
code
TI-PBW110-04-04
TI-PBW110-06-04
TI-PBW110-06-06
AGM
DKL
DKS
DKOS
code
TI-PMZ140-12-04
-
code
TI-PMW111-14-04
-
code
TI-PMW112-16-04
TI-PMW112-18-04
code
TI-PMW122-18-04
BSP thread, 60 cone
Metric thread
hose
I.D.
[inch]
1/4
TI-P (700, 800 bar)
thread
size
[inch]
code
TI-P352-04
TI-P352-06
NPTF (NPSM) thread, 60 cone

AGN
DKN
JIC, UNF, 74 cone

DKJ
hose
I.D.
[inch]
1/4
1/4
3/8
code
TI-PNZ110-02-04
TI-PNZ110-04-04
TI-PNZ110-06-04
TI-PNZ110-06-06
code
TI-PNW110-04-04
TI-PNW110-06-06
code
-
code
TI-PJW110-08-04
TI-PJW110-09-04
-
Hose assembly with a rubber fitting protector
TI-PBW110-06-06
TI-P352-06
EM-GKB-10
UH-352-10
869

SPIR STAR hoses
The internal layer of SPIR STAR hoses is made of the highest quality thermoplastic materials such as polyoxymethylene (POM), polyamide (PA), polyvinylidene fluoride (PVDF), polytetrafluoroethylene - Teflon (PTFE). There
are up to 8 layers of high-tensile spring wire made of carbon or stainless steel (also acid resistant steel) spirally
wrapped around the internal core.
The external layer is made of polyurethane, different kinds of polyamide or of PVDF depending on application.
Unique combination of the properties of materials that SPIR STAR hoses are made of, allowed to obtain superior
hose characteristics which outperform standard hoses:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Ultrahigh pressure - up to 3200 bar for UHP type.

Low volumetric expansion rate when under pressure - quick response of an executive part to a feed impulse.
Smooth internal layer minimizes pressure drop.
Reinforced with steel wire layers, which prevent kinking when the hose is bent and ensure long operation life
in the most demanding applications.
External layer resistant to wear and damage.
Long lengths available - up to 4500 m.
Small outside diameter - good proportion of size to high pressure operation capability - important when cleaning
hard-to-reach places.
Tailor-made assemblies are also available: twin hoses, bundles and other special-purpose systems.
Excellent flow rate.
Very good chemical resistance to detergents, chemicals and solvents.
Low weight.
Resistance to external pressure.
Resistance to ultraviolet radiation, ozone and ageing.
High stability in high temperatures (for HT series).
Resistance to seawater.
High resistance to impulse operation.
Low medium permeability factor.
The main areas of SPIR STAR application:

Waterblast technology
The main fields of application: hydro demolition and treatment of concrete, sewage system cleaning, water jet
cutting, pipeline and heat exchanger cleaning, surface preparation - surface cleaning and degreasing with a pure
medium (water) or medium with solids and abrasives added. A wide range of hose types combined with fittings of
special structure e.g. Blast Pro type, allows to satisfy any application need.
High pressure hydraulics
SPIR STAR hoses are widely applied wherever maximum flexibility and resistance to external damage are required.
SPIR STAR hoses are about 50% lighter than similar rubber hoses. Examples of application: hardening of metal
surface with high pressure (autofrettage), hydroforming, lifesaving equipment and bolt tensioning.
Oil and gas mining industry - oil rigs
Confirmed applications in offshore projects on rigs of the North Sea and Gulf of Mexico. The main areas of application: hose bundles, methanol service, chemical injection, hydraulics and oilfield well hydraulic control. Other
advantages of SPIR STAR hoses vital for this branch of industry: availability of long lengths up to 4500 m in one
piece, resistance to external pressure and high temperature up to 150C for some types of hoses.
Other branches of industry
Aircraft, military, chemical, automotive and shipbuilding industry, railway, local government, road infrastructure.
870

SPIR STAR hoses
inside diameter
[mm]
5/4HT
number of steel
wire spirals
DC1
E
F
H
HT
K
L
M
OK
PPA
R
ES
W
-
-
-
-
-
-
-
-
-
-
-
-
-
double cover (PA/PUR)

stainless steel wire
PTFE internal layer
reinforced version
for application in extreme temperatures
additional reinforcement layer in external layer
extremely flexible
PA11 internal core for methanol service
additional reinforcement layer on external layer
PVDF internal layer, PA external layer
thicker/reinforced external layer
resistant to seawater
open (wide) layers of spiralled wire, as an alternative for
additional external reinforcement
871

SPIR STAR hoses
code
2 type
I.D.
[mm]
O.D.
[mm]
working
pressure
[bar]
bursting
pressure
[bar]
bending
radius
[mm]
weight
[kg/m]
fitting
I.D.
[mm]
ferrule
O.D.
[mm]
Lightweight, flexible, 2 layer hose used mainly with lances and to clean heat exchangers, hose assemblies and
piping systems.
Internal layer: POM (polyoxymethylene), from 10 mm PA (polyamide), external layer: PA (polyamide).
SS-NW-03/2
3,4
6,9
1000
2500
60
0,07
8,9
SS-NW-04/2
1200
3000
75
0,11
2,5
10,1
12,9
SS-NW-05/2
9,4
1040
2600
95
0,13
3 (3,5)
SS-NW-06/2
6,3
11,5
1000
2500
110
0,18
13,9
SS-NW-08/2
8,1
13,3
900
2250
130
0,20
5,5
17,8
SS-NW-10/2
10,1
15,5
690
1725
160
0,28
6,5
20,8
SS-NW-13/2
12,9
19,3
690
1725
200
0,44
8,5
26
SS-NW-20/2
19
26,2
520
1300
240
0,75
13
34,2
24,8
33,5
440
1100
300
0,95
16,5
40
SS-NW-25/2
2K type
Robust, flexible, 2 layer hose used mainly with lances and to clean heat exchangers, hose assemblies and piping
systems.
Internal layer: PA (polyamide), external layer: PUR (polyurethane).
SS-NW-04/2K
9,8
1200
3000
65
0,19
2,5
13,1
SS-NW-06/2K
6,2
12,9
1120
2800
95
0,30
16,2
2OK type
Robust, flexible, 2 layer hose used mainly with lances and to clean heat exchangers, hose assemblies and piping
systems.
Internal layer: POM (polyoxymethylene), external layer: PA (polyamide) + additional stainless steel layer.
SS-NW-05/2OK
10,8
1040
2600
95
0,22
3,5
13,3
SS-NW-06/2OK
6,2
13,1
1000
2500
110
0,31
15
2W type
Robust, flexible, kink-resistant hose mainly used for tightening screws, iron roughnecks, jacks, cutters and other
devices.
Internal layer: PA (polyamide), external layer: PUR (polyurethane) * - twin version (Twin Hose) available.
SS-NW-04/2W
9,8
1400
3500
65
0,16
2,5
13
SS-NW-06/2W
12
1280
3200
95
0,23
15,4
SS-NW-06/2WL *
5,9
12
1200
3000
80
0,24
15,5
SS-NW-08/2W *
14,3
1040
2600
110
0,31
5,5
18,3
SS-NW-08/2WL
14
1000
2500
100
0,32
5,5
18,3
SS-NW-08/2WR
16
1040
2600
110
0,36
4,5
21,3
SS-NW-10/2W
10
17,2
1100
2760
125
0,43
6,5
21,5
SS-NW-13/2W
12,8
20,8
1040
2600
150
0,59
8,5
26,7
SS-NW-13/2WR
12,8
22,2
1040
2600
150
0,59
7,5
27,5
SS-NW-20/2W
18,8
29,5
760
1900
220
1,16
13
36,3
25
35,6
640
1600
280
1,49
16,5
44
SS-NW-25/2W
3 type
Lightweight, flexible, 3 layer hose used mainly with lances and to clean heat exchanger, hose assemblies and
piping systems.
Internal layer: POM (polyoxymethylene), external layer: PA (polyamide).
SS-NW-05/3
10,3
1120
2800
95
0,22
3 (3,5)
12,9
SS-NW-06/3
6,1
12,3
1040
2600
110
0,28
14,1
872

SPIR STAR hoses
code
4 type
I.D.
[mm]
O.D.
[mm]
working
pressure
[bar]
bursting
pressure
[bar]
bending
radius
[mm]
weight
[kg/m]
fitting
I.D.
[mm]
ferrule
O.D.
[mm]
Robust, flexible, 4 layer hose used mainly for tightening screws, jacks, iron roughnecks, cutters, jacks, water jet
cutting machines, pressure testing machines, and other devices.
SS-NW-03/4
3,4
2000
5000
110
0,14
12,1
SS-NW-04/4
10,3
2200
5500
130
0,23
1,8
14,7
SS-NW-05/4
11,2
1800
4500
150
0,26
2,5
15
SS-NW-06/4
6,3
12,6
1500
3800
180
0,30
3,5
16,4
SS-NW-08/4
14,6
1500
3800
200
0,39
4,5
20,3
SS-NW-10/4
9,9
18,4
1500
3800
200
0,69
5,5
23,1
SS-NW-13/4
12,8
21,4
1300
3250
200
0,80
7,5
27,4
SS-NW-13/4H
12,8
22
1400
3500
200
0,88
7,5
29,5
SS-NW-16/4
16
25,5
1040
2600
250
1,00
10,5
32,7
SS-NW-20/4
18,8
28,8
1040
2600
250
1,35
13
36,9
SS-NW-25/4
24,8
36,3
900
2250
300
1,72
19
45,9
6 type
Robust, flexible, 6 layer hose used mainly for high pressure cleaning, water jet cutting, hydroforming, chemicals
injection and lubrication under high pressure.
SS-NW-03/6
9,1
2800
7000
150
0,23
1,8
15,3
SS-NW-04/6
11,5
2800
7000
175
0,37
1,8
17,1
SS-NW-05/6
4,8
13,2
2500
6250
200
0,45
17,5
SS-NW-05/6H
4,6
14,4
2800
7000
220
0,56
19,7
SS-NW-06/6H
5,9
16,4
2800
7000
250
0,75
21,4
16,4
2100
5250
250
0,64
4,5
21,6
SS-NW-08/6
SS-NW-08/6H
7,7
18,8
2500
6250
260
0,93
4,5
25,7
SS-NW-08/6UHP
7,6
19,3
2800
7000
300
1,06
4,5
23,3
SS-NW-08/6UHP-X
7,6
19,3
3035
7000
300
1,06
4,5
23,3
SS-NW-10/6
9,8
20,4
1920
4800
250
1,00
5,5
26,6
SS-NW-13/6
12,8
23,4
1800
4500
300
1,16
7,5
30,1
SS-NW-13/6H
12,7
24,8
2000
5000
300
1,20
7,5
32,9
SS-NW-16/6
15,9
27,7
1520
3800
320
1,48
10,5
35
SS-NW-20/6
18,8
32,8
1400
3500
350
2,17
13
42,9
SS-NW-25/6
24,8
39,8
1400
3000
600
2,80
17,5
49
8 type
SS-NW-04/8
SS-NW-05mmUHP
Robust, flexible, 8 layer hose used mainly for high pressure water jet cutting, hydroforming and laboratory applications.
Internal layer: POM (polyoxymethylene), from 13 mm PA (polyamide) external layer: PA (polyamide).
4
12,8
3200
8000
175
0,54
1,8
19,5
4,5
15,3
3200
8000
250
0,69
19,7
SS-NW-06mmUHP
5,8
18,6
3200
8000
280
1,06
23,7
SS-NW-08/8
7,6
20,8
2800
7000
300
1,29
4,5
27,9
SS-NW-08mmUHP
7,6
22
3200
7400
300
1,50
4,5
29,7
SS-NW-13mmUHP
12,8
27,7
2800
6000
350
2,09
7,5
34,6
15,9
31,8
2000
5000
400
2,52
10,5
38
SS-NW-16mmUHP
HDC1 type
Hose designed for cleaning of heat exchangers, surface preparation, ship hull cleaning and hydro demolition of
concrete.
Internal layer: POM (polyoxymethylene), external layer: PA (polyamide) + PUR (polyurethane).
SS-NW-05/6HDC1
4,6
18,4
2800
7000
220
0,69
19,7
SS-NW-08/6HDC1
7,7
22,8
2500
6250
260
1,09
4,5
25,7
873

SPIR STAR hoses
I.D.
[mm]
code
SS-HT-05/4HT
SS-HT-06/2WHT
SS-HT-06/4HT
SS-HT-08/2WHT
SS-HT-08/4HT
SS-HT-10/4HT
SS-HT-13/4HHT
5
6,3
6,3
8
8
9,9
12,8
bursting
pressure
[bar]
bending
radius
[mm]
weight
[kg/m]
fitting
I.D.
[mm]
ferrule
O.D.
[mm]
11,2
12,2
12,6
14,5
14,6
18,4
22
1285
915
1085
745
1085
1085
1040
4500
3200
3800
2600
3800
3800
3620
250
150
280
250
300
300
300
0,28
0,27
0,32
0,40
0,41
0,70
1,00
2,5
3,5
3,5
4
4,5
5
7,5
15,4
17,1
17,5
20,7
20,2
24,9
29,5
4
3
5,5
5
8,5
16,5
16,8
19.9
18,3
21,5
27,8
42
2,5
3,5
3,5
5,5
5,5
5,5
4,5
5,5
8,5
7,5
10,5
13
13
19
15
17,1
16,4
17,8
17,8
18,3
20,3
23,1
26,5
29,5
32,7
36,9
43,1
42,3
Hose designed for methanol injection.

Internal layer: PA11 BOSNO P40 TLO polyamide, external layer: Polyamide (PA).
M type
SS-M-06/2WM
SS-M-06/4WM
SS-M-08/2WM
SS-M-10/2WM
SS-M-13/2WM
SS-M-25/2KM
6
6
8
10
12,7
23,6
12,2
13
14,3
17,2
20,8
32,6
1100
1035
1040
1100
1040
500
2760
4140
2600
2760
2600
1250
95
180
110
125
150
280
0,24
0.34
0,31
0,47
0,63
1,20
Hose designed especially for oil rig applications.

Internal layer: PVDF (polyvinylidene fluoride), external layer: Polyamide (PA).
PPA type
SS-PPA-05/4PPA
SS-PPA-06/2WPPA
SS-PPA-06/4PPA
SS-PPA-08/2PA
SS-PPA-08/2PPA
SS-PPA-08/2WPPA
SS-PPA-08/4PPA
SS-PPA-10/4PPA
SS-PPA-13/2WPPA
SS-PPA-13/4HPPA
SS-PPA-16/4PPA
SS-PPA-20/4PPA
SS-PPA-20/6PPA
SS-PPA-25/4PPA
SS-KF-06/2KF
SS-KF-08/2KF
SS-KF-10/2KF
SS-KF-13/2KF
SS-KF-16/2KF
SS-KF-20/2KF
SS-KF-25/2KF
working
pressure
[bar]
Hose designed for hot chemicals injection. Working temp. up to +150C.

Internal layer and external layer: PVDF (polyvinylidene fluoride).
HT type
KF type
O.D.
[mm]
5
6,3
6,3
8,1
8,1
8
8
10
12,8
12,8
16
18,8
18,8
24,8
11,2
12,2
12,6
13,3
13,3
14,5
14,7
18,4
20,8
22
25,5
28,8
32,8
36,3
1285
915
1180
840
570
790
1085
1180
790
1040
790
775
1040
690
4500
3200
4140
2100
2000
2760
3800
4140
2760
3620
2760
2760
3620
2250
250
150
280
130
300
250
300
300
300
300
400
500
600
500
0,26
0,27
0,31
0,20
0,23
0,36
0,42
0,68
0,67
1,00
1,08
1,35
2,17
1,82
Hose designed especially for high pressure heating systems. Cannot be used without external protection layer,
e.g. thermoplastic or silicone.
Internal layer: PTFE (Teflon), external layer: carbon steel braid.
6
7,8
9,8
12,2
15,1
20,2
24,2
11
13,3
15,5
18,6
21,4
27,6
31,7
500
475
475
450
400
300
275
2000
1900
1900
1800
1600
1200
1100
60
85
110
150
175
200
240
0,26
0,35
0,44
0,60
0,70
1,06
1,21
4,5
5,9
7,5
9,9
12,5
16,1
19
Working temperature range for SPIR STAR hose types (working pressure depends on working temperature).

- HT type
- PPA type
- KF type
- other
874

from -20C up to +80C (PA from -30C up to +60C)

SPIR STAR hoses - VIPER, MAMBA, COBRA type
VIPER, MAMBA and COBRA, a new type of hoses in SPIR-STAR line whose construction ensures high flexibility
and tensile strength. Used in UHP hydraulics e.g. in bolt tensioners, jacks, control panels, etc.
Working temperature from -30C up to +60C.
code
VIPER type
SS-HL-VIPER-06
VIPER Twin type
(double)
SS-HL-VIPER-06T
MAMBA type
SS-HL-MAMBA-06
MAMBA Twin type
(double)
SS-HL-MAMBA-06T
COBRA type
SS-HL-COBRA-05
I.D.
[mm]
O.D.
[mm]
working
pressure
[bar]
bursting
pressure
[bar]
bending
radius
[mm]
weight
[kg/100 m]
fitting
I.D.
[mm]
ferrule
O.D.
[mm]
Internal layer: PA (polyamide), reinforcement layer: multi layers of high- tensile steel wire.
External layer: yellow fluorescent PUR (polyurethane).
6,1
12,5
700
1800
80
20,60
14,4
14,4
15,5
15,5
External layer: yellow and purple fluorescent PUR (polyurethane).
6,1
12,5
700
1800
80
41,2
External layer: red PUR (polyurethane).
5,9
12
1200
3000
80
23,70
External layer: red and dark grey PUR (polyurethane).
5,9
12
1200
3000
80
47,40
Internal layer: POM (polyoxymethylene), reinforcement layer: multi layers of high- tensile steel wire.
External layer: dark blue PA (polyamide).
5
11,2
1800
4500
150
25,00
2,5
15
Basic fittings for VIPER, MAMBA, COBRA hoses
fitting
hose type
NPTF female
NPTF male
BSP male
(seal. ring)
BSP male
(seal. 100cone)
BSP female
VIPER
VIPER Twin
1/4-18
1/4-18
3/8-18
MAMBA
MAMBA Twin
1/4-18
1/4-18
3/8-18
1/4
1/4
1/4
COBRA
1/4
1/4
1/4
875

SPIR STAR fittings
The most common combinations of fittings and basic types of SPIR STAR hoses are marked with numerical
codes e.g. for hose SS-NW-06/2. They are given in the tables below. The tables facilitate initial fitting selection for
a particular hose type. The process of matching the fitting to the particular hose, the choice of sealing and thread
size depends not only on the nominal diameter of the hose assembly but also on its maximum working pressure
i.e. mainly on the number of reinforcement layers and fitting material. The standard combinations given in the
tables below do not apply to special types of hoses - those marked with additional letters in the code of the hose
type, e.g. NW-SS-06/2 WL.
The final confirmation of availability of hose-fitting connection must be based on the most recent catalogue cards
from SPIR STAR catalogue.
The procedure of initial standard hose assembly selection:
1. The selection of a hose according to such working parameters as medium, temperature. The maximum working pressure and required nominal diameter are selected from the tables on SPIR STAR hoses pages of this
catalogue.
2. The selection of fittings from the tables below.
3. The verification of the selection by comparison to SPIR STAR catalogue data.
fitting
hose
DN
hose type - number

of reinf. layers
2
10
13
16
20
25
876
NPTF / NPT male
1/4"
1/16"
1/4"x28
1/4"x28; 3/8"x24
1/4"
1/4"x28
1/16"; 1/8"; 1/4"; 5/16"
1,4"
1/4"x28; 3/8"x24; 9/16"x18
1/8"
1/4"x28; 3/8"x24; 9/16"x18
1/4"
1/8"; 1/4"
1/4"
HP male (UNF LH)

LH metric thread
BSP female
1/4"x28; 3/8"x24; 9/16"x18
1/4"
1/4"x28; 3/8"x24; 9/16"x18; M14x1,5
1/4"
9/16"
1/8"; 1/4"; 3/8"
1/4"
3/8"x24
1/4"
3/8"x24; 9/16"x18; M14x1,5
3/8"
1/4"; 3/8"
3/8"
9/16"x18
1/4"; 3/8"
9/16"x18
1/4'; 3/8"
3/8"x24; 9/16"x18; M14x1,5; 3/4"x16
1/2"
3/8"; 1/2"
1/2"
9/16"x18
1/2"
9/16"x18
1/2"
1/2"
9/16"x18; 3/4"x16
3/4"x16
3/4"
M18x1.5
1"x11,5
1"x14
1"x11,5
1"x14

SPIR STAR fittings
fitting
hose
DN
3
4
5
10
13
16
20
25
hose type - number

of reinf. layers
2
metric female, O-ring

(DKOS *)
metric female
(DKL or DKS *)
M type (UNF female)

HP female
(UNF or LH female)
M24x1,5
M24x1,5
M20x1,5
M18x1.5; M22x1.5; M24x1,5
M18x1.5
M20x1,5; M24x1,5
M22x1.5; M24x1,5
M24x1,5
M22x1.5
M22x1.5; M24x1,5
M22x1.5; M24x1,5
M22x1.5; M24x1,5
M24x1,5
M30x2
M36x2
M42x2
M42x2
M12x1,5 (DKL)
M14x1,5 (DKL)
M14x1,5 (DKL)
M14x1,5 (DKL)
M14x1,5 (DKL); M16x1,5 (DKS)
-
9/16"x18
9/16"x18
9/16"x18
9/16"x18
1/4"x28; 3/8"x24; 9/16"x18
9/16"x18
9/16"x18
3/8"x24; 9/16"x18
9/16"x18
3/4"x16
3/4"x16
3/4"x16; 7/8"x14
3/4"x16
3/4"x16
1"x12
1"x12
1 5/16"x12
1 5/16"x12
1 5/16"x12
JIC female UNF
BSP male
BSP male / metric

(flat sealing)
9/16"
9/16"
9/16"
9/16"
3/4"
1 1/16"x12
1 5/16"x12
1 5/16"x12
1/8"; 1/4"
1/8"; 1/4"
1/4"
1/8"; 1/4"; 3/8"
1/4"
1/4"; 3/8"
1/4"; 3/8"
3/8"
-
M6x1, M7x1
1/8"; M7; M8; M10
1/8"; M7; M10
1/4"
1/4"
1/4"
-
fitting
hose
DN
3
4
5
hose type - number

of reinf. layers
2
10
13
20
* Note: Fittings with metric thread basically correspond to such familiar types as DKOS, DKL and DKS. However,
due to dimension differences occurring in certain sizes, it is recommended to confirm the choice with TUBES
INTERNATIONAL Technical Department.
877

Fittings and accessories for SPIR STAR hoses
HP connection is the most popular way of components connections in high pressure technology. Its principle is
shown in the picture below.
1
1.
2.
3.
4.
Fitting with UNF left-hand male thread or left-hand metric thread.

Gland nut with hexagon head for spanner and UNF right-hand male thread or metric one.
Collar with UNF left-hand female thread or left-hand metric thread corresponding to the fitting thread.
Connecting adaptor with UNF right-hand female thread or metric one for screwing with the gland nut (2).
Gland nuts and collars

picture
code
thread size
description
SS-6000305
M16x1,5
SS-6000025
1/4x28 UNF LH
SS-6000165
3/4x16 UNF
Gland nut
SS-6000373
M20x1,5
Gland nut
SS-6000035
3/8x24 UNF LH
SS-6000395
M30x2
SS-6000055
9/16x18 UNF LH
Collar
SS-6000285
M14x1,5 LH
Collar
Gland nut
Collar
Collar
Gland nut
Adaptors
picture
code
working
pressure
[bar]
thread size
SS-D-DKOS-M24-5
2800
2 x male M24x1,5
SS-D-DKOS-M36-5
1400
2 x male M36x2
SS-D-DKOS-M42-5
480
2 x male M42x2
SS-D-DKR-G1/4-5
2800
2 x male 1/4" BSP
SS-D-DKR-G3/8-5
2800
2 x male 3/8" BSP
SS-D-DKR-G1/2-5
2000
2 x male 1/2" BSP
SS-D-HD-1/4-5
4000
2 x female M16x1,5 (HP 1/4")
SS-D-HD-3/8-5
4000
2 x female M20x1,5 (HP 3/8")
SS-D-HD-9/16-5
4000
2 x female M30x2 (HP 9/16")
Other types are available on request.

Also check high pressure adaptors for TEMA and CEJN quick release couplings.
878
description
High pressure DKOS nipple
High pressure DKR nipple
Straight connection HP
(body)

Fittings and accessories for SPIR STAR hoses
Hose bend restrictors (assembled behind sleeve)
Polyurethane restrictors raise working safety level and extend hose service life. They are very lightweight and easy
to assemble. Intended for hoses operating under highest pressure (see the table). For hoses with lower working
pressure and other applications e.g. for hose 6/2 WL, standard rubber restrictors should be used. (see CLEANING
AND WASHING - code EM-KK or EM-GK). Please contact TUBES INTERNATIONAL Technical Department
to confirm your selection.
picture
code
Dxd
[mm]
hose type
SS-BR-PUR-01
30 x 18
5/6
SS-BR-PUR-02
30 x 19,5
5/6H
SS-BR-PUR-03
30 x 20,5
5mmUHP
SS-BR-PUR-04
40 x 22,5
6/6H
SS-BR-PUR-05
40 x 26
6mmUHP
SS-BR-PUR-04
40 x 22,5
8/6
SS-BR-PUR-05
40 x 26
8/6H
SS-BR-PUR-06
40 x 28,5
8/8
SS-BR-PUR-07
40 x 30
8mmUHP
Hose securing grips

Steel securing grips used to protect a hose operator against the effects of connection failure e.g. pulling a fitting
out from the hose. Very easy to install, even when the systems is on - requires disconnection of the hose from the
system only at one side for assembly time. In emergency situation, when the hose-fitting connection breaks or the
fitting is pulled out from the installation, the grip shrinks and tightens on the hose so the hose slows down and stops.
picture
code
hose O.D.
[mm]
strength
[kN]
SS-CG-01
10 15
10,2
SS-CG-02
15 20
20,4
SS-CG-03
20 30
24,3
SS-CG-04
30 40
35,1
SS-CG-05
40 50
48
SS-CG-06
50 60
48
Protective hose covers

In order to protect the external hose layer, another hose - LUISIANA and CRISTALLO (see INDUSTRIAL HOSES
- food) can be used by sliding the protective hose over the one to be protected. LUISIANA hose cover (reinforced
with spiral) secures SPIR STAR hoses in WATERBLAST applications where high surface friction occurs. CRISTALLO hose cover (without reinforcement) secures high pressure hydraulic hoses in applications where friction is
smaller but maximum flexibility is crucial.
Selection of a protective hose cover: the outside diameter of the ferrule of SPIR STAR hose after crimping must
be smaller than the inside diameter of the protective hose.
879

UHP accessories
Monro Jet nozzle
Material:
Water flow:
Working press.:
Working temp.:
Stainless steel
From 3 l/min. up to 230 l/min.
From 200 bar up to 2500 bar
Up to +100C
Monro Jet rotary nozzle enables spreading a high pressure stream of water over a large area. Designed to be assembled on lances and water guns for ultrahigh pressures, operated manually or by robots. Used in construction,
rust and scale removal industry, cleaning of castings, drilling rigs, ships and tanks, roads and runways, pipes and
hose assemblies, building facades, cutting off roots, removing and cleaning of concrete constructions, removing
paint, tar, asphalt and bituminous coverings. Selection made on the basis of pressure and water consumption of
supply device. Please contact TUBES INTERNATIONAL Technical Department to confirm your selection.
dimensions [mm]
length
width
type
working press.
[bar]
F1 (20)
1500
134,9
F2 (20)
1000
134,9
F3 (20)
800
134,9
weight
[kg]
rotor calibration
connections
49
1,25
0,60 2,80
9/16-18 UNF LH (RH)

M14x1,5 LH
M24x1,5 RH
49
1,25
0,60 2,80
1/4 BSP
3/8 BSP (NPT)
1/2 BSP (NPT)
0,60 2,80
1/4 BSP
3/8 BSP (NPT)
1/2 BSP (NPT)
9/16-18 UNF LH (RH)
M14x1,5 LH
M24x1,5 RH
49
0,67
F4 (20)
500
109,0
43
0,64
0,60 2,80
F6 (30)
500
109,0
43
0,64
0,60 1,65
F25 (20)
2500
134,9
49
1,30
0,40 1,20
1/4 BSP
3/8 BSP (NPT)
1/2 BSP (NPT)
9/16-18 UNF LH (RH)
M14x1,5 LH
1/4 BSP
3/8 BSP (NPT)
1/2 BSP (NPT)
9/16-18 UNF LH (RH)
M14x1,5 LH
9/16-18 UNF LH (RH)
M14x1,5 LH
Code structure of Monro Jet nozzle
MV
F1
080
nozzle type
connection
connection code
880
38B
38N
12B
M14L
calibration
1/4 BSP 3/8 BSP 3/8 NPT 1/2 BSP 1/2 NPT M14x1,5 LH
14B
12N
M14L
connection code
M24x1,5 RH
M14R
9/16-18 UNF LH 9/16-18 UNF RH

916L
916R

Quick release couplings
The series is specially designed for ultra-high pressure. The diversity of this product range enables using the couplings even in the most demanding applications. These couplings are made of hardened steel to ensure longer
service life. They are compact and easy to connect. The unique design of these couplings minimizes possible fluid
leakage and prevents air inclusion so that it enables keeping the coupling clean. Blank plugs that are provided with
the couplings as a standard provide additional protection from dirt. Versions with a safety locking ring preventing
accidental disconnection are available on request.
Flat-Face series
The Flat-face, dry-brake series has been developed to meet the rigorous demands of ultrahigh pressure hydraulic
applications. It is easier to control the cleanliness of a connecting surface as it is flat. Moreover the series is designed for one hand operation. It is enough to push the plug into the socket without any positioning. The plug is
automatically locked in the socket. In order to disconnect the socket turn the locking sleeve by 30 and then pull it
backwards to release the plug. The unique blank plug design with an integrated pressure eliminator is a solution
to a problem of residual pressure that is sometimes present on the plug side, making it difficult to connect with the
socket. By pressing the button on the blank plug, the internal pressure can be easily relieved and the plug can be
pushed in into the socket without any problems.
Sealing for threaded connection of a coupling with hose assembly or hydraulic system
type of sealing
application
metal - metal sealing

120 cone
For the pressure of 700 bar and above, the use of 120 cone sealing is recommended. The cone allows to achieve very good sealing properties at low tightening torque so the quick release couplings can be reassembled many times
without any risk of damage to the sealing surfaces.
rubber - metal seals
Rubber - metal seals can be used for parallel thread or other components with
appropriate sealing surface (flat surface). Rubber - metal seals are not recommended for pressures above 1000 bar.
liquid sealant or paste sealant
It is recommended to use liquid or paste sealant for NPT or BSPT threads.

Sealing tape (e.g. PTFE tape) should be avoided as it may damage components during tightening or cause system malfunction if it accidentally enters the
hydraulic system.
Proper selection and handling of a quick release coupling

In order to choose a quick release coupling properly for certain application and to be sure that it is going to function faultlessly, we should:
- Account for the working pressure of a quick release coupling, flow rate and pressure drop as well as the type
of sealing.
- Consider protection against accidental disconnection.
- Do not connect couplings under pressure.
- Keep the quick release coupling clean (wipe off the surface of the socket and plug before each connection).
- Use blank plugs and caps whenever the socket and plug are separated as they protect the quick release couplings against dirt and debris. It is important to wipe the socket and plug clean each time before putting the
blank plugs and caps on. The blank plug and cap should be connected whenever the coupling is connected.
- Check the condition of the plug, socket and sealing on regular basis - replace them, if necessary.
881

CEJN 115 series
TEMA 1000 series
Material:
Seal:
Flow rate:
Nominal diam.:
Working press.:
Bursting press.:
Hardened, zinc-plated steel

NBR
6 l/min. (p = 4 bar)
2,5 mm
1000 bar (connected coupling)
2600 bar (CEJN)
3000 bar (TEMA)
Double shut-off hydraulic quick release coupling designed for ultra-high pressure systems. Used in crimping
machines, rescue equipment, jacks, cutters, etc. The socket is available with a safety locking ring preventing accidental disconnection as an option. Both sockets and plugs are supplied with blank plugs and caps as a standard.
CEJN code
TEMA code
CJ-HP-101151102
CJ-HP-101151104
CJ-HP-101151201
CJ-HP-101151202
CJ-HP-101151204
CJ-HP-101151222*
CJ-HP-101151401
CJ-HP-101151402
CJ-HP-101151404
CJ-HP-101151422*
-
TA-H-HP10104131
TA-H-HP10104171
TA-H-HP10104132*
TA-H-HP10104172*
TA-H-HP10105131
TA-H-HP10105171
TA-H-HP10105132*
TA-H-HP10105172*
thread
size
1/4 BSPT
3/8 BSPT
1/8 BSP
1/4 BSP
3/8 BSP
1/4 BSP
3/8 BSP
1/8 NPT
1/4 NPT(F)
3/8 NPT(F)
1/4 NPT(F)
3/8 NPT(F)
CJ-HP-101151252
1/4 BSP
2)
CJ-HP-101151254
3/8 BSP
3)
CJ-HP-101151452
1/4 NPT
CJ-HP-101151454
3/8 NPT
CJ-HP-101156102
CJ-HP-101156104
CJ-HP-101156201
CJ-HP-101156202
CJ-HP-101156204
CJ-HP-101156401
CJ-HP-101156402
CJ-HP-101156404
CJ-HP-101156152
CJ-HP-101156154
CJ-HP-101156212
CJ-HP-101156272**
CJ-HP-101156452
CJ-HP-101156454
TA-H-HP1020413
TA-H-HP1020417
TA-H-HP1020513
TA-H-HP1020517
-
1/4 BSPT
3/8 BSPT
1/8 BSP
1/4 BSP
3/8 BSP
/8 NPT
1/4 NPT(F)
3/8 NPT(F)
1/4 BSPT
3/8 BSPT
1/4 BSP
1/4 BSP
1/4 NPT
3/8 NPT
1)
4)
3)
2)
2)
-
picture
Socket - female thread
Socket - male thread
Plug - female thread
Plug - male thread
*) with safety locking ring

**) with safety valve
1) metal-rubber seal CJ-HP-199500061
882
sealing
1)
4)
3)
4)
3)
-
spanner L [mm] D [mm]

[mm]
( 2mm) ( 2mm)
59
61
54
28
60
61
60
24
59
27
54
59
28
60
59
61
24
28
62
22
24
17
22
24
17
22
24
37
38
33
25
28
20
38
26
33
36
37
20
CEJN code
TEMA code
description
TA-H-HP16
TA-H-HP26
socket blank plug PVC

plug blank cap PVC
plug blank cap PVC
plug blank cap PVC
26
63
22
50
52
62

4) cone 120
CJ-HP-091151005
CJ-HP-091151057
CJ-HP-091151004
CJ-HP-091151055
CJ-HP-091151002
CJ-HP-091151053
27
colour
blue
black
red
26

CEJN 116 series
TEMA 1500 series
Material:
Seal:
Flow rate:
Nominal diam.:
Working press.:
Bursting press.:
Hardened, zinc-plated steel

NBR
2,5 mm
3000 bar (CEJN)
3500 bar (TEMA)
Double shut-off hydraulic quick release coupling designed for ultra-high pressure systems. Used in crimping
machines, rescue equipment, jacks, cutters, etc. The socket is available with a safety locking ring preventing accidental disconnection as an option. Both socket and plugs are supplied with blank plugs and caps as a standard.
picture
CEJN code
thread
size
TEMA code
sealing
CJ-HP-101161201
1/8 BSP
1)
CJ-HP-101161202
TA-H-HP15104131
1/4 BSP
5)
CJ-HP-101161222 a)
TA-H-HP15104132 a)
1/4 BSP
5)
CJ-HP-101161230 c)
1/4 BSP
2)
CJ-HP-101161246 a) b)
1/4 BSP
2)
TA-H-HP15104171
3/8 BSP
3)
TA-H-HP15104172 a)
3/8 BSP
3)
CJ-HP-101161402
TA-H-HP15105131
1/4 NPT(F)
CJ-HP-101161422 a)
TA-H-HP15105132 a)
1/4 NPT(F)
TA-H-HP15105171
3/8 NPT(F)
TA-H-HP15105172 a)
3/8 NPT(F)
CJ-HP-101166201
1/8 BSP
1)
CJ-HP-101166202
TA-H-HP1520413
1/4 BSP
5)
CJ-HP-101166241 d)
1/4 BSP
5)
spanner L [mm] D [mm]

[mm]
( 2mm) ( 2mm)
54
24
28
60
67
35
61
24
59
17
33
22
38
TA-H-HP1520417
3/8 BSP
3)
24
CJ-HP-101166402
TA-H-HP1520513
1/4 NPT(F)
22
TA-H-HP1520517
3/8 NPT(F)
24
28
20
37
25
Plug - male thread

CJ-HP-101165252 e)
a)
b)
c)
d)
e)
28
with safety locking ring

made of stainless steel
with angular connection
valve made of stainless steel
plug without valve
BSP 1/4
1)
2)
3)
4)
5)
4)
22
41
metal-rubber seal CJ-HP-199500061

copper washer CJ-HP-099504600
120 cone seal
CEJN code
TEMA code
description
CJ-HP-091151005
CJ-HP-091151057
CJ-HP-091151004
CJ-HP-091151055
CJ-HP-091151002
CJ-HP-091151053
TA-H-HP16
TA-H-HP26

plug blank cap PVC
plug blank cap PVC
plug blank cap PVC
colour
blue
black
red
883

CEJN 115 FF series
Material:
Seal:
Flow rate:
Working press.:
Bursting press.:
Working temp.:
Hardened zinc-plated steel, aluminium

NBR
5,3 l/min. (p = 4 bar)
2800 bar
Double shut-off hydraulic quick release coupling designed for ultra-high pressure systems. For one hand operation.
The unique flat surface face between socket and plug ensures dry-brake disconnection and prevents air inclusion.
Lightweight design makes it a perfect choice for applications where weight is of highest importance. Highly recommended for rescue equipment, hydraulic tools and testing equipment. The 115 FF type socket can be connected
to the standard 115 series type plug.
code
DN
[mm]
thread
size
thread seal
spanner
[mm]
L
[mm]
D
[mm]
weight
[g]
CJ-HP-101151200
2,5
1/4 BSP
rubber-metal
seal
24
70,1
30
170
picture
CEJN 116 FF series

Material:
Seal:
Flow rate:
Working press.:
Hardened zinc-plated steel

NBR
5,3 l/min. (p = 4 bar)
1500 bar - 1/4, 1000 bar - 3/8
(connected coupling)
Double shut-off hydraulic quick release coupling designed for ultra-high pressure systems. For one hand operation.
The unique flat surface face between socket and plug ensures dry-brake disconnection and prevents air inclusion.
Widely used in cylinders, hydraulic tools and testing equipment. The 116 FF type socket can be connected to the
standard 116 series type plug.
thread
size
thread seal
CJ-HP-101161219
1/4 BSP
120 cone
CJ-HP-101161229
3/8 BSP
rubber metal seal
CJ-HP-101161419
1/4 NPT
picture
code
DN
[mm]
CJ-HP-101161429
3/8 NPT
1/4 BSP
rubber metal seal
CJ-HP-101161279
3/8 BSP
rubber metal seal
CJ-HP-101161469
1/4 NPT
CJ-HP-101161479
3/8 NPT
CJ-HP-101161269
Socket - male thread
2,5
spanner
[mm]
L
[mm]
D
[mm]
72,1
24
72,6
69,1
weight
[g]
215
30
70,6
225
225
220
205
24
70,6
30
210
200
210
code
description
code
description
code
description
CJ-HP-101154100
socket blank plug FF
CJ-HP-101154101
plug blank cap FF
CJ-HP-101154102
plug blank cap FF + elimin.
884

CEJN 117 series
Material:
Seal:
Flow rate:
Working press.:
Bursting press.:
Working temp.:

NBR
2600 bar
Double shut-off hydraulic quick release coupling designed for ultra-high pressure systems. Although the 117 series
is a sister coupling to 115 series and has the same working parameters, they are not compatible. The two series
are widely used in rescue tools. CEJN 117 couplings are supplied with plastic blank plugs and caps as a standard.
picture
Coupling - female thread
Coupling - male thread
thread
size
thread seal
CJ-HP-101171202
1/4 BSP
120 cone
CJ-HP-101171232*
1/4 BSP
120 cone
code
DN
[mm]
spanner
[mm]
24
CJ-HP-101171404
3/8 NPT
3/8 NPT
3/8 BSP
rubber metal seal
CJ-HP-101171454
3/8 NPT
CJ-HP-101176202
1/4 BSP
120 cone
22
CJ-HP-101176404
3/8 NPT
24
2,5
D
[mm]
weight
[g]
165
61,3
CJ-HP-101171434*
CJ-HP-101171254
L
[mm]
28
60,3
170
165
170
60,8
24
28
155
38
25,4
60
37
27,7
65
62,3
CEJN 218 series

Material:
Seal:
Flow rate:
Working press.:
Bursting press.:
Working temp.:

NBR
15 l/min. (p = 4 bar)
2800 bar
Double shut-off hydraulic quick release coupling designed for ultra-high pressure systems. The socket equipped
with a safety locking ring preventing accidental disconnection. Developed for application where high flow rates are
required. CEJN 218 couplings are supplied with plastic plugs and caps as a standard.
picture
Coupling - female thread
thread
size
thread seal
CJ-HP-102181234
3/8 BSP
rubber metal seal
CJ-HP-102181434
3/8 NPT
CJ-HP-102186204
3/8 BSP
rubber metal seal
CJ-HP-102186404
3/8 NPT
code
DN
[mm]
spanner
[mm]
L
[mm]
D
[mm]
weight
[g]
340
30
73,4
34,6
330
4,5
50,5
24
115
27,7
49
110
885

CEJN 125 series
Material:
Seal:
Flow rate:
Working press.:
Bursting press.:
Working temp.:

NBR
5,8 l/min. (p = 4 bar)
5000 bar
Hydraulic quick release coupling designed for ultra-high pressure systems. Available as a double or single shutoff version (there is no valve in the plug with male thread). Widely used for bolt tensioners, bearing pullers, etc.
Supplied with plastic blank plugs and caps as a standard.
picture
code
DN
[mm]
thread
size
thread seal
spanner
L
[mm]
[mm]
D
weight
[mm]
[g]
1/4 BSP
120 cone
24
64,3
30
210
1/4 BSP
120 cone
22
38
25,4
60
1/4 BSP
cooper washer
22
42,5
25,4
65

CJ-HP-101251203

2,5
CJ-HP-101256203
Plug - female (without valve)

CJ-HP-101255252
CEJN 135 series

Material:
Seal:
Flow rate:
Working press.:
Bursting press.:
Working temp.:

NBR
4,6 l/min. (p = 4 bar)
3000 bar (disconnected or connected)
6000 bar
Double shut-off hydraulic quick release coupling for ultra-high pressure systems. The socket equipped with a safety
locking ring preventing accidental disconnection. Widely used in hydraulic tools and testing equipment. The series
enables connection even under high pressure. CEJN 135 couplings are supplied with blank plugs and caps as a
standard. Swivelling of the plug in the socket can cause its wear and damage that is why quick release couplings
with standard (swivelling) plugs (CJ-101351505) can only be exposed to 1000 cycles up to the maximum working
pressure, whereas the couplings with non-swivel plugs (CJ-101356506) - 5000 cycles.
picture
thread
size
thread seal
spanner
[mm]
L
[mm]
D
[mm]
weight
[g]
M16x1,5
60 cone
22
64
30
210
CJ-HP-101356505
M16x1,5
60 cone
22
55,3
25
125
CJ-HP-101356506
M16x1,5
60 cone
22
55,3
25
125
code
DN
[mm]

CJ-HP-101351505
2,5
886

CEJN 230 series
DNP PVS series
Material:
Seal:
Flow rate:
Zinc-plated steel
NBR
1/4 - 15,7 l/min; (p=4 bar)
3/8 - 20,2 l/min; (p=4 bar)
Bursting press.: 1/4 - 2200 bar (connected coupling)
3/8 - 1850 bar (connected coupling)
1/4 - 1800 bar (disconnected socket)
3/8 - 1850 bar (disconnected socket)
1/4 - 1490 bar (disconnected plug)
3/8 - 1500 bar (disconnected plug)
Double shut-off, screw hydraulic quick release couplings designed for ultra-high pressure systems where large
mechanical loads occur. Widely used in crimping machines, rescue equipment, jacks, cutters, etc. CEJN 230 series
can be connected under pressure. Steel or aluminium blank plugs and caps are available on request.
picture
DN [mm]
CJ-HP-102301452
DP-PVS3-0606022
3,7
1/4
NPT
22
60,8
53
28
30
CJ-HP-102301484
DP-PVS3-1010022
4,8
3/8
NPT
24
72,3
62
35
35
CJ-HP-102306402
DP-PVS1-0606013
3,7
1/4
NPT
19
32,5
39
28
30
CJ-HP-102306434
DP-PVS1-1010013
4,8
3/8
NPT
32
40
40,5
35
35
CEJN DNP
material
DNP code
description
CJ-HP-102304101
DP-SPVS-06102
socket blank plug 1/4
CJ-HP-102304103
DP-SPVS-10102C
socket blank plug 3/8
CJ-HP-102304100
DP-SPVS-06103
plug blank cap 1/4
CJ-HP-102304102
DP-SPVS-10103C
plug blank cap 3/8
2
3
L [mm]
D [mm]
span.
[mm] CEJN DNP CEJN DNP
DNP code
CEJN code
picture
thread
size
CEJN code
code
size
[inch]
CJ-HP-199500061
1/8
CJ-HP-199500062
1/4
CJ-HP-199500064
3/8
CEJN
DNP
zinc-plated steel
aluminium
working pressure
[bar]
1000
description
1) rubber-metal seal
CJ-HP-199500083
1/4
1500
2) rubber-metal seal
CJ-HP-099504600
1/4
2000
3) cooper washer
887

Connectors
Adaptors enable connection of quick release couplings with Ultra High Pressure (UHP) hoses as well as connection of the assemblies with UHP porting blocks. Made of black zinc-plated steel.
picture
code
A1
thread
seal
A2
thread
seal
L
[mm]
span.
[mm]
press.
[bar]
CJ-HP-199501622
1/4
BSP
60 inner cone
1/4
BSP
60 inner cone
31,5
21
2000
CJ-HP-199501623
1/4
BSP
60 inner cone
1/4
NPT (F)
on thread
32
21
CJ-HP-199501621
1/4
BSP
60 inner cone
1/4
BSPT
on thread
33
21
1000
CJ-HP-199501603
1/4
BSP
60 inner cone
3/8
NPT (F)
on thread
34
21
CJ-HP-199501604
1/4
BSP
60 inner cone
3/8
BSPT
on thread
35
21
CJ-HP-199501602
1/4
BSP
60 inner cone
1/4
BSP
120 outer cone
39
21
CJ-HP-199501605
1/4
BSP
60 inner cone
9/16-18
UNF
60 outer cone
37
17
CJ-HP-199501606
1/4
BSP
60 inner cone
3/4-16
UNF
60 outer cone
42
21
2000
888
CJ-HP-199501607
1/4
BSP
60 inner cone
M16x1,5
60 outer cone
37
19
CJ-HP-199501608
1/4
BSP
60 inner cone
M22x1.5
60 outer cone
48
27
CJ-HP-199500029
1/4
BSP
120 outer cone
9/16-18
UNF
60 inner cone
37,5
17
CJ-HP-199501601
1/4
BSP
120 outer cone
1/4
BSP
120 outer cone
45
17
3000

Connectors
UHP adaptors - continued:
picture
code
A1
thread
seal
A2
thread
seal
L
[mm]
span.
[mm]
press.
[bar]
CJ-HP-199501611
1/4
BSP
120 outer cone
3/4-16
UNF
60 outer cone
48,5
21
2000
CJ-HP-199501610
1/4
BSP
120 outer cone
M16x1,5
60 outer cone
44
22
3000
CJ-HP-199501609
1/4
BSP
120 outer cone
M22x1.5
60 outer cone
54,5
27
2000
CJ-HP-199500022
1/4
BSP
120 outer cone
9/16-18
UNF
60 outer cone
43,5
17
CJ-HP-199501613
9/16-18
UNF
60 outer cone
M16x1,5
60 outer cone
44,2
19
CJ-HP-199501612
M16x1,5
60 outer cone
M16x1,5
60 outer cone
43
19
CJ-HP-199501614
9/16-18
UNF
60 inner cone
M16x1,5
60 outer cone
38,2
19
CJ-HP-199500016
1/8
BSP
rubber-metal
seal
22
3000
2000
1000
CJ-HP-199500015
1/4
BSP
rubber-metal
seal
260,1
CJ-HP-199500014
1/4
BSP
rubber-metal
seal
260,1
1500
CJ-HP-199501600
1/4
BSP
120 outer cone
27
17
3000
889

Connectors
CEJN porting blocks enable to connect several pressure hoses to one pump as well as to connect a pressure
gauge. Made of black zinc-plated steel. Flow diameter 5 mm (3/16).
picture
code
description
CJ-HP-199501680
4-way porting block

(supplied with one
blank plug
CJ-HP-199501600)
CJ-HP-199501681
CJ-HP-199501682
CJ-HP-199501683
CJ-HP-199501684
CJ-HP-199501600
890
3-way pressure
gauge block
3-way porting block
5-way porting block
2-way
angular block
blank plug
thread
seal
press.
[bar]
120 inner cone
3000
rubber-metal
seal
1000
120 inner cone
2000
rubber-metal
seal
1000
120 inner cone
3000
rubber-metal
seal
1000
120 inner cone
3000
rubber-metal
seal
1000
120 inner cone
3000
rubber-metal
seal
1000
120 outer cone
3000
4 x 1/4 BSP
2 x 1/4 BSP
1 x 1/2 BSP
3 x 1/4 BSP
5 x 1/4 BSP
2 x 1/4 BSP
1/4 BSP

Information on high pressure connections
SPIR STAR hose
nut
connector
ring
nut
UHP pipe
ring
pipe
nut
MP - (medium pressure) up to 1380 bar (20 000 PSI)

HP - (high pressure) up to 4140 bar (60 000 PSI)
safety
locking ring
weep hole
The nut presses against the safety locking ring screwed on

the pipe end. For HP - the ring hides in the nut, for MP- it
is fully visible.
weep hole
58 fitting
60 socket
High pressure connections are available in several types, but most of them derive from the Autoclave standard.
For MP, HP and HP Waterblast, there is 58 cone at the end of a pipe, and 60 cone in the body of a socket. Metalto-metal sealing is obtained by interfaces of the cones.
HP Waterblast is a derivative of the HP system.
Procedure for the connection described above:
On properly prepared pipe (58 cone + left-hand thread of appropriate length) a nut must be inserted and a safety
locking ring screwed. The correct position of the locking ring is reached when one or two threads are visible from
the cone side. Once the pipe is ready, it should be placed in the socket, tightened by hand and then with a torque
spanner according to working pressure and pipe size requirements.
Table of safety locking ring thread sizes, nuts and recommended tightening torques.
characteristic
MP
1/4
3/8
HP
9/16
1/4
3/8
HP Waterblast
9/16
1/4
3/8
9/16
9/16-18
UNF LH
or
M14x1,5 LH
M30x2
or
M26x1,5
thread
on the pipe
1/4-28
UNF LH
3/8-24
UNF LH
9/16-18
UNF LH
1/4-28
UNF LH
3/8-24
UNF LH
9/16-18
UNF LH
1/4-28
UNF LH
3/8-24
UNF LH
nut thread
7/16-20
UNF
9/16-18
UNF
13/16-16
UNF
9/16-18
UNF
3/4-16
UNF
1.1/8-12
UNF
M16x1,5
M20x1,5
1380
1380
1380
4140
4140
4140
3200
3200
3200
30
40
75
34
68
102
34
68
102
max. working
pressure
[bar
tightening
torque
[Nm]
Always wear protective clothing while working close to high pressure devices without housing.
Always check the connection. If possible, the start-up of installation should be done at relatively low pressure.
Do it for your own safety. In case of faulty connection, leakage of medium through weep hole takes place - see
picture above.
891

Connectors
High-pressure (HP) connectors allow to build rigid pipe installations and to attach high pressure hose assemblies.
All elements are designed to work under pressure in three ranges: 1380 bar, 2070 bar and 4140 bar. Made of AISI
316L steel, designed to work with liquid and gaseous media.
Working temperature from -73C up to +315C.
HP pipe connection with 58 cone and left-hand imperial thread.
code
pipe
[inch]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
thickn.
[mm]
DN
[mm]
SM-S20V01T01
1/4
123
38,1
70
80
15,88
3,2
SM-S20V01T02
3/8
123
50,8
76
80
19,05
5,5
SM-S20V01T03
9/16
160
63,5
96
100
25,4
SM-S30V01T01
1/4
124
34,93
80
80
25,4
2,4
SM-S30V01T02
3/8
128
44,45
88
80
25,4
3,2
SM-S30V01T03
9/16
135
66,68
121
80
38,1
3,2
SM-S60V01T01
1/4
124
34,93
80
80
25,4
1,6
SM-S60V01T02
3/8
128
44,45
88
80
25,4
1,6
SM-S60V01T03
9/16
135
66,68
121
80
38,1
picture
code
pipe
[inch]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
thickn.
[mm]
DN
[mm]
Two way 90 needle valve
SM-S20V02T01
1/4
123
38,1
60
80
15,88
3,2
SM-S20V02T02
3/8
123
50,8
63
80
19,05
5,5
SM-S20V02T03
9/16
160
63,5
80
100
25,4
SM-S30V02T01
1/4
124
34,93
65
80
25,4
2,4
SM-S30V02T02
3/8
128
44,45
69
80
25,4
3,2
SM-S30V02T03
9/16
135
66,68
94
80
38,1
3,2
SM-S60V02T01
1/4
124
34,93
65
80
25,4
1,6
SM-S60V02T02
3/8
128
44,45
69
80
25,4
1,6
SM-S60V02T03
9/16
135
66,68
94
80
38,1
code
pipe
[inch]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
thickn.
[mm]
DN
[mm]
SM-S20V03T01
1/4
132
38,1
70
80
15,88
3,2
SM-S20V03T02
3/8
136
50,8
76
80
19,05
5,5
SM-S20V03T03
9/16
177
63,5
98
100
25,4
SM-S30V03T01
1/4
138
34,93
80
80
25,4
2,4
SM-S30V03T02
3/8
147
44,45
88
80
25,4
3,2
SM-S30V03T03
9/16
162
66,68
121
80
38,1
3,2
SM-S60V03T01
1/4
138
34,93
80
80
25,4
1,6
SM-S60V03T02
3/8
147
44,45
88
80
25,4
1,6
SM-S60V03T03
9/16
162
66,68
121
80
38,1
picture
Two way straight needle
valve
picture
Three way needle valve
(two inlets)
892
working
pressure
20000 PSI
1380 bar
30000 PSI
2070 bar
60000 PSI
4140 bar
working
pressure
20000 PSI
1380 bar
30000 PSI
2070 bar
60000 PSI
4140 bar
working
pressure
20000 PSI
1380 bar
30000 PSI
2070 bar
60000 PSI
4140 bar

Connectors
picture
code
pipe
[inch]
A
[mm]
B
[mm]
C
[mm]
D
[mm]
thickn.
[mm]
DN
[mm]
Three way needle valves

(one inlet)
SM-S20V04T01
1/4
132
38,1
70
80
15,88
3,2
SM-S20V04T02
3/8
136
50,8
76
80
19,05
5,5
SM-S20V04T03
9/16
177
63,5
98
100
25,4
SM-S30V04T01
1/4
138
34,93
80
80
25,4
2,4
SM-S30V04T02
3/8
147
44,45
88
80
25,4
3,2
SM-S30V04T03
9/16
162
66,68
121
80
38,1
3,2
SM-S60V04T01
1/4
138
34,93
80
80
25,4
1,6
SM-S60V04T02
3/8
147
44,45
88
80
25,4
1,6
SM-S60V04T03
9/16
162
66,68
121
80
38,1
picture
Ring
picture
Nut
code
pipe
[inch]
A
[mm]
B
[mm]
SM-S20F12T01
1/4
9,5
5,6
SM-S20F12T02
3/8
12,4
6,3
SM-S20F12T03
9/16
18,4
SM-S60F12T01
1/4
9,5
9,5
SM-S60F12T02
3/8
12,7
13,5
SM-S60F12T03
9/16
20,64
20,64
code
pipe
[inch]
A
[mm]
span. B
[mm]
SM-S20F13T01
1/4
14,5
12,7
SM-S20F13T02
3/8
19
15,87
SM-S20F13T03
9/16
25,5
22,2
SM-S60F13T01
1/4
22
15,88
SM-S60F13T02
3/8
30
20,64
SM-S60F13T03
9/16
40
30,16
working
pressure
20000 PSI
1380 bar
30000 PSI
2070 bar
60000 PSI
4140 bar
working
pressure
20000 PSI
1380 bar
60000 PSI
4140 bar
working
pressure
20000 PSI
1380 bar
60000 PSI
4140 bar
893

Connectors
picture
Blank plug
picture
Cap
picture
Straight connector
894
code
pipe
[inch]
A
[mm]
B
[mm]
working
pressure
SM-S20F11T01
1/4
23,5
9,5
SM-S20F11T02
3/8
30,5
12,4
SM-S20F11T03
9/16
40
18,3
SM-S60F11T01
1/4
28
9,5
SM-S60F11T02
3/8
37
12,7
SM-S60F11T03
9/16
50
20,64
code
pipe
[inch]
A
[mm]
span. B
[mm]
SM-S20F10T01
1/4
21
20
SM-S20F10T02
3/8
29
26
SM-S20F10T03
9/16
35
35
SM-S60F10T01
1/4
22,23
16
SM-S60F10T02
3/8
31,75
20
SM-S60F10T03
9/16
38,1
26
20000 PSI
1380 bar
60000 PSI
4140 bar
working
pressure
20000 PSI
1380 bar
60000 PSI
4140 bar
code
pipe
[inch]
A
[mm]
B
[mm]
span. C
[mm]
span. D
[mm]
SM-S20F08T01
1/4
9,22
44,5
13
26
SM-S20F08T02
3/8
12,78
50,8
16
26
SM-S20F08T03
9/16
17,12
60,33
23
35
SM-S60F08T01
1/4
14,63
41
16
16
SM-S60F08T02
3/8
18,68
45
21
20
SM-S60F08T03
9/16
26,93
54
31
16
working
pressure
20000 PSI
1380 bar
60000 PSI
4140 bar

Connectors
picture
Bulkhead straight connector
picture
Anti-vibration nut
picture
Pipe nipple
code
pipe
A
B
C
D
E
J
span. F
[inch] [mm] [mm] [mm] [mm] [mm] [mm] [mm]
SM-S20F09T01
1/4
20
48
13,5
25,4
9,22
10
13
SM-S20F09T02
3/8
23
55
16
34,9 12,78
10
16
SM-S20F09T03
9/16
30
64
19
34,9 17,12
10
23
SM-S30F09T01
1/4
23
50
12,7
25,4 14,63
10
16
SM-S30F09T02
3/8
30
60,33
19
34,9 18,68
10
21
SM-S30F09T03
9/16
43
69,85 25,4 47,63 26,93
10
31
SM-S60F09T01
1/4
23
50,8
12,7
25,4 14,63
10
16
SM-S60F09T02
3/8
30
60,33
19
34,9 18,68
10
21
SM-S60F09T03
9/16
43
69,85 25,4 47,63 26,93
10
31
code
pipe
[inch]
A
[mm]
span. B
[mm]
span. C
[mm]
SM-S20F14T01
1/4
32,01
16
13
SM-S20F14T02
3/8
37,21
20
16
SM-S20F14T03
9/16
47,19
26
23
SM-S60F14T01
1/4
22
16
SM-S60F14T02
3/8
30
21
SM-S60F14T03
9/16
40
31
code
length [mm/inch]
pipe
69,85 76,2 101,6 152,4 203,2
[inch]
2.3/4
3
4
6
8
working
pressure
20000 PSI
1380 bar
30000 PSI
2070 bar
60000 PSI
4140 bar
working
pressure
20000 PSI
1380 bar
60000 PSI
4140 bar
254
10
305
12
SM-S20F16T01/...
1/4
SM-S20F16T02/...
3/8
SM-S20F16T03/...
9/16
SM-S60F16T01/...
1/4
SM-S60F16T02/...
3/8
SM-S60F16T03/...
9/16
working
pressure
20000 PSI
1380 bar
60000 PSI
4140 bar
895

Connectors
picture
Elbow
picture
Tee
picture
Cross
896
code
pipe
[inch]
A
[mm]
B
[mm]
D
[mm]
E
[mm]
thickn.
[mm]
span. F
[mm]
SM-S20F04T01
1/4
28,45
38,1
19,05 19,05
15,88
13
SM-S20F04T02
3/8
35,05
50,8
25,4
25,4
19,05
16
SM-S20F04T03
9/16
44,45
63,5
31,75 31,75
25,4
23
SM-S60F04T01
1/4
38,1
34,93 22,23
25,4
25,4
16
SM-S60F04T02
3/8
38,1
44,45 31,75
25,4
25,4
21
SM-S60F04T03
9/16
47,63 66,68 47,63 28,58
38,1
31
code
pipe
[inch]
A
[mm]
B
[mm]
D
[mm]
E
[mm]
thickn.
[mm]
span. F
[mm]
SM-S20F05T01
1/4
28,45
38,1
19,05 19,05
15,88
13
SM-S20F05T02
3/8
35,05
50,8
25,4
25,4
19,05
16
SM-S20F05T03
9/16
44,45
63,5
31,75 31,75
25,4
23
SM-S60F05T01
1/4
34,93
50,8
22,23 22,23
25,4
16
SM-S60F05T02
3/8
39,69
50,8
26,99 26,99
25,4
21
SM-S60F05T03
9/16
53,98 66,68 34,93 34,93
38,1
31
code
pipe
[inch]
A
[mm]
B
[mm]
D
[mm]
E
[mm]
thickn.
[mm]
span. F
[mm]
SM-S20F06T01
1/4
38,1
38,1
19,05 19,05
15,88
13
SM-S20F06T02
3/8
50,8
50,8
25,4
25,4
19,05
16
SM-S20F06T03
9/16
63,5
63,5
31,75 31,75
25,4
23
SM-S60F06T01
1/4
38,1
50,8
25,4
19,05
25,4
16
SM-S60F06T02
3/8
50,8
53,98 26,99
25,4
25,4
21
SM-S60F06T03
9/16
66,68 69,85 34,93 33,34
38,1
31
working
pressure
20000 PSI
1380 bar
60000 PSI
4140 bar
working
pressure
20000 PSI
1380 bar
60000 PSI
4140 bar
working
pressure
20000 PSI
1380 bar
60000 PSI
4140 bar

Connectors
picture
Check valve
picture
Ball check valve
picture
Two way ball valve
code
pipe
[inch]
A
[mm]
B
[mm]
span. C
[mm]
SM-S20F01T01
1/4
75
9,22
13
SM-S20F01T02
3/8
80
12,78
16
SM-S20F01T03
9/16
114
17,12
23
SM-S30F01T01
1/4
86
14,63
16
SM-S30F01T02
3/8
97
18,68
21
SM-S30F01T03
9/16
117
26,93
31
SM-S60F01T01
1/4
86
14,63
16
SM-S60F01T02
3/8
97
18,68
21
SM-S60F01T03
9/16
117
26,93
31
code
pipe
[inch]
A
[mm]
B
[mm]
span. C
[mm]
SM-S20F02T01
1/4
75
10
13
SM-S20F02T02
3/8
80
12
16
SM-S20F02T03
9/16
114
13,5
23
SM-S30F02T01
1/4
86
14,63
16
SM-S30F02T02
3/8
97
18,68
21
SM-S30F02T03
9/16
117
26,93
31
SM-S60F02T01
1/4
86
14,63
16
SM-S60F02T02
3/8
97
18,68
21
SM-S60F02T03
9/16
117
26,93
31
code
SM-B15V01T11
SM-B15V01T12
SM-B15V01T13
thread /
pipe
1/4"
NPT
3/8"
NPT
1/2"
NPT
A
B
C
D
[mm] [mm] [mm] [mm]
working
pressure
20000 PSI
1380 bar
30000 PSI
2070 bar
60000 PSI
4140 bar
working
pressure
20000 PSI
1380 bar
30000 PSI
2070 bar
60000 PSI
4140 bar
thickn.
[mm]
DN
[mm]
96
50,5 103,3
70
25,4
6,4
96
50,5 103,3
70
25,4
6,4
104
76,2 137,7
115
34,9
9,5
SM-B20V01T01
1/4"
96
50,5 103,3
70
25,4
2,8
SM-B20V01T02
3/8"
96
50,5 103,3
70
25,4
5,2
SM-B20V01T03
9/16
104
76,2 143,9
115
34,9
working
pressure
15000 PSI
1034 bar
20000 PSI
1380 bar
- For SM-B15 type, connections with NPT female thread; for SM-B20 type, high pressure connections MP.
- Working temperature from -30 C up to +150 C
897
CEJN pressure gauges 940 series

Case:
AISI 316 or AISI 304 steel
Dial:
Aluminium
Needle:
Aluminium or stainless steel
Seal:
Polychloroprene
Filling:
98% glycerine
Working temp.:
Internal protection: IP 65
Accuracy:
63: 1.6% of scale
100, 150: 1% of scale
Versions:
Bottom connection
Back connection
Characteristics: CEJN pressure gauges are designed for ultra-high pressure applications. A measuring range
should be selected according to working pressure so as not to exceed 75% of the maximum
measuring range. A dual measuring scale - in PSI and BAR standard. Available with bottom or back
(panel mounting) connection. The pressure gauges can be mounted using CEJN porting blocks.
thread size
[inch]
BSP 1/4
pressure
[bar / PSI]
1000 / 14500
NPT 1/4
1000 / 14500
CJ-HP-199403120
BSP 1/2
1000 / 14500
CJ-HP-199403140
NPT 1/2
1000 / 14500
BSP 1/2
1600 / 23200
BSP 1/2
2060 / 20870
code
CJ-HP-199402120
CJ-HP-199402121
CJ-HP-199403121
diameter
[mm]
63
100
CJ-HP-199403122
CJ-HP-199404120
CJ-HP-199404121
150
BSP 1/2
1000 / 14500
BSP 1/2
1600 / 23200
CJ-HP-199404122
BSP 1/2
2060 / 29870
CJ-HP-199402320
BSP 1/4
1000 / 14500
CJ-HP-199402321
63
NPT 1/4
1000 / 14500
BSP 1/2
1000 / 14500
BSP 1/2
1600 / 23200
CJ-HP-199403322
BSP 1/2
2060 / 29870
CJ-HP-199404320
BSP 1/2
1000 / 14500
BSP 1/2
1600 / 23200
BSP 1/2
2060 / 29870
CJ-HP-199403320
CJ-HP-199403321
CJ-HP-199404321
CJ-HP-199404322
898
100
150
version
bottom connection
back connection
INSTRUMENTATION - connectors
LET-LOK type connectors
Description and application
LET-LOK connectors for pipes are designed mainly for chemical, petrochemical, pharmaceutical and power industry, nuclear power plants and process engineering. Designed to work under high pressure, vacuum, vibration,
high temperatures, and where high leak tightness of connections is required. Made in accordance with an industrial
specification for two O-ring connectors in the highest quality applications. To meet all production requirements,
fully automatic machining centres are utilized to make products which undergo 100% quality control at different
stages of production process.
LET-LOK connectors are available as couplings (to connect several pipes) and connectors (to join pipes with
fittings with male or female thread).
Structure of LET-LOK fitting
nut
body
front Ferrule
back Ferrule
The mechanism of a coupling causes gripping and sealing of connection on the cone of the body and front ferrule.
The pipe deforms and the seal is made only by metal parts which allows to get the maximum working temperature
of about 650C, both for high pressure and vacuum. Such connection provides perfect leak tightness without unnecessary stress.
Basic advantages of LET-LOK connectors
- A wide range of pipe diameters, from 2 up to 50 mm and from 1/16 up to 2.
- Maintains high leak tightness of the connection even after repeated assembly.
- Very high leak tightness in high pressure and temperature conditions, vacuum, vibration and rapid changes of
pressure.
- Made in 4 material versions: stainless steel AISI 316, brass, Monel 400 alloy and Hastelloy C-276.
- To facilitate identification, each connector is marked with a material name it is made of and with pipe outside
diameter.
- Connectors are assembled using a regular spanner which lowers the costs of installation and service.
The pipes used with LET-LOK connectors
In order to ensure maximum reliability, durability and safety of the connection, special attention should be given
to the matching of a pipe to an application. The pipes made of AISI 304 or AISI 316 stainless steel in connection
with stainless steel LET-LOK connectors can be used in the widest range of applications. The pipes should be
made in accordance with the requirements of ASTM A213, ASTM A269 standards or equivalent.
When choosing the pipe, notice the following:
- The pipe surface should be smooth without scratches, clean from dirt.
- The pipe must not be flattened or oval. It can damage the connector and cause leakage.
- The pipe should be annealed and made of material which is softer than the material of the connector (90 HRB
or lower).
- The thickness of the wall must be adapted to the working pressure in the installation.
Copper pipes can be also used but in connection with brass LET-LOK fittings (contact TUBES INTERNATIONAL
Sales or Technical Department).
899
O.D.
[inch]
1/16
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1.1/4
1.1/2
2
O.D.
[mm]
3
6
8
10
12
14
15
16
18
20
22
25
38
50
0,010
386
0,8
670*
310*
0,012
473
0,014
572
1,0
420
310*
240*
200*
160
150
maximum working pressure [bar] for seamless stainless steel pipes - imperial
wall thickness [inch]
0,016 0,020 0,028 0,035 0,049 0,065 0,083 0,095 0,109 0,120
666
846
600*
770
379*
490
724
283*
359
524
724
283*
407
559
235*
334
451
173
258*
355
465
203
279*
361
417
168
230*
292
341
403
141
196
241*
290
334
165
214*
248
290
324
165
193*
227
248
159
186
207*
138
152
0,134
0,156
0,188
283
234
172
338
276
200*
338
249
maximum working pressure [bar] for seamless stainless steel pipes - metric
wall thickness [mm]
1,2
1,5
1,8
2,0
2,2
2,5
2,8
3,0
3,5
4,0
540
390
300
250
200*
190
170
150
140
120
710
520
400
330
270
250
230*
200*
180
160
510
410
340
310
290
260
230*
200
180
580
470
380
360
330
290
260
230*
200
430
400
370
320
290
260
230*
140
400
370
330
300
260
190
380
340
290
190
320
200*
150
240
180
270
210
4,5
5,0
310
240*
270
* - recommended minimum pipe wall thickness for gases
Working pressure correction factor for stainless steel pipes depending on temperature:
temperature [C]
coefficient [AISI 316]
93
1
204
0,96
316
0,85
427
0,79
538
0,76
649
0,37
The allowable working pressure of LET-LOK connectors is defined by the lower of two values: the maximum
working pressure of pipes with certain outside diameter at a given temperature and (for connectors with thread)
maximum working pressure for certain size and type of threaded connection according to the table below:
thread size
[inch]
1/16
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
900
maximum working pressure [bar] for connectors with NPT and BSP(T) threads
AISI 316
brass
male thread
female thread
male thread
female thread
759
462
379
228
690
448
345
221
552
455
276
228
538
366
269
179
531
338
262
165
503
317
248
159
366
303
179
152
414
345
207
172
345
317
172
159
269
269
131
131
Ferrule for metric pipe
Ferrule for imperial pipe
M760L...
code
back ring
front ring
pipe O.D.
[mm]
HM-LM760LB-02SS
HM-LM760LB-03SS
HM-LM760LB-04SS
HM-LM760LB-06SS
HM-LM760LB-08SS
HM-LM760LB-10SS
HM-LM760LB-12SS
HM-LM760LB-14SS
HM-LM760LB-15SS
HM-LM760LB-16SS
HM-LM760LB-18SS
HM-LM760LB-20SS
HM-LM760LB-22SS
HM-LM760LB-25SS
HM-LM760LB-38SS
HM-LM760LB-50SS
HM-LM760LF-02SS
HM-LM760LF-03SS
HM-LM760LF-04SS
HM-LM760LF-06SS
HM-LM760LF-08SS
HM-LM760LF-10SS
HM-LM760LF-12SS
HM-LM760LF-14SS
HM-LM760LF-15SS
HM-LM760LF-16SS
HM-LM760LF-18SS
HM-LM760LF-20SS
HM-LM760LF-22SS
HM-LM760LF-25SS
HM-LM760LF-38SS
HM-LM760LF-50SS
2
3
4
6
8
10
12
14
15
16
18
20
22
25
38
50
Insert for metric pipe
C760L...
code
back ring
front ring
pipe O.D.
[inch]
HM-LC760LB-01SS
HM-LC760LB-02SS
HM-LC760LB-03SS
HM-LC760LB-04SS
HM-LC760LB-05SS
HM-LC760LB-06SS
HM-LC760LB-08SS
HM-LC760LB-10SS
HM-LC760LB-12SS
HM-LC760LB-14SS
HM-LC760LB-16SS
HM-LC760LB-20SS
HM-LC760LB-24SS
HM-LC760LB-32SS
HM-LC760LF-01SS
HM-LC760LF-02SS
HM-LC760LF-03SS
HM-LC760LF-04SS
HM-LC760LF-05SS
HM-LC760LF-06SS
HM-LC760LF-08SS
HM-LC760LF-10SS
HM-LC760LF-12SS
HM-LC760LF-14SS
HM-LC760LF-16SS
HM-LC760LF-20SS
HM-LC760LF-24SS
HM-LC760LF-32SS
1/16
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1.1/4
1.1/2
2
Insert for imperial pipe
M760LI
code
pipe O.D.
[mm]
pipe I.D.
[mm]
HM-LM760LI-06-04SS
HM-LM760LI-08-06SS
HM-LM760LI-10-08SS
HM-LM760LI-12-08SS
HM-LM760LI-12-10SS
6
8
10
12
12
4
6
8
8
10
C760LI
code
pipe O.D.
[mm]
pipe I.D.
[mm]
HM-LC760LI-03-02SS
HM-LC760LI-04-02SS
HM-LC760LI-04-03SS
HM-LC760LI-05-02SS
HM-LC760LI-05-03SS
HM-LC760LI-05-04SS
HM-LC760LI-06-03SS
HM-LC760LI-06-04SS
HM-LC760LI-08-04SS
HM-LC760LI-08-06SS
HM-LC760LI-10-06SS
HM-LC760LI-10-08SS
HM-LC760LI-12-08SS
HM-LC760LI-12-10SS
HM-LC760LI-16-12SS
3/16
1/4
1/4
5/16
5/16
5/16
3/8
3/8
1/2
1/2
5/8
5/8
3/4
3/4
1
1/8
1/8
3/16
1/8
3/16
1/4
3/16
1/4
1/4
3/8
3/8
1/2
1/2
5/8
3/4
901
Nut for metric pipe
Nut for imperial pipe
M761L
code
pipe O.D.
[mm]
spanner
size
[mm]
HM-LM761L-02SS
HM-LM761L-03SS
HM-LM761L-04SS
HM-LM761L-06SS
HM-LM761L-08SS
HM-LM761L-10SS
HM-LM761L-12SS
HM-LM761L-14SS
HM-LM761L-15SS
HM-LM761L-16SS
HM-LM761L-18SS
HM-LM761L-20SS
HM-LM761L-22SS
HM-LM761L-25SS
HM-LM761L-38SS
HM-LM761L-50SS
2
3
4
6
8
10
12
14
15
16
18
20
22
25
38
50
12
12
12
14
16
19
22
25
25
25
30
32
32
38
60
3
Straight connector for metric pipe
C761L
code
pipe O.D.
[inch]
spanner
size
[inch]
HM-LC761L-01SS
HM-LC761L-02SS
HM-LC761L-03SS
HM-LC761L-04SS
HM-LC761L-05SS
HM-LC761L-06SS
HM-LC761L-08SS
HM-LC761L-10SS
HM-LC761L-12SS
HM-LC761L-14SS
HM-LC761L-16SS
HM-LC761L-20SS
HM-LC761L-24SS
HM-LC761L-32SS
1/16
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1.1/4
1.1/2
2
5/16
7/16
1/2
9/16
5/8
11/16
7/8
1
1.1/8
1.1/4
1.1/2
1.7/8
2.1/4
3
Straight connector for imperial pipe
M762L
902
code
pipe O.D.
[mm]
HM-LM762L-02SS
HM-LM762L-03SS
HM-LM762L-04SS
HM-LM762L-06SS
HM-LM762L-08SS
HM-LM762L-10SS
HM-LM762L-12SS
HM-LM762L-14SS
HM-LM762L-15SS
HM-LM762L-16SS
HM-LM762L-18SS
HM-LM762L-20SS
HM-LM762L-22SS
HM-LM762L-25SS
HM-LM762L-38SS
HM-LM762L-50SS
2
3
4
6
8
10
12
14
15
16
18
20
22
25
38
50
C762L
code
pipe O.D.
[inch]
HM-LC762L-01SS
HM-LC762L-02SS
HM-LC762L-03SS
HM-LC762L-04SS
HM-LC762L-05SS
HM-LC762L-06SS
HM-LC762L-08SS
HM-LC762L-10SS
HM-LC762L-12SS
HM-LC762L-14SS
HM-LC762L-16SS
HM-LC762L-20SS
HM-LC762L-24SS
HM-LC762L-32SS
1/16
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1.1/4
1.1/2
2
Tee for metric pipe
Tee for imperial pipe
M764L
code
pipe O.D.
[mm]
HM-LM764L-02SS
HM-LM764L-03SS
HM-LM764L-04SS
HM-LM764L-06SS
HM-LM764L-08SS
HM-LM764L-10SS
HM-LM764L-12SS
HM-LM764L-14SS
HM-LM764L-15SS
HM-LM764L-16SS
HM-LM764L-18SS
HM-LM764L-20SS
HM-LM764L-22SS
HM-LM764L-25SS
HM-LM764L-38SS
HM-LM764L-50SS
2
3
4
6
8
10
12
14
15
16
18
20
22
25
38
50
90 elbow for metric pipe
C764L
code
pipe O.D.
[inch]
HC-LC764L-01SS
HC-LC764L-02SS
HC-LC764L-03SS
HC-LC764L-04SS
HC-LC764L-05SS
HC-LC764L-06SS
HC-LC764L-08SS
HC-LC764L-10SS
HC-LC764L-12SS
HC-LC764L-14SS
HC-LC764L-16SS
HC-LC764L-20SS
HC-LC764L-24SS
HC-LC764L-32SS
1/16
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1.1/4
1.1/2
2
90 elbow for imperial pipe
M765L
code
pipe O.D.
[mm]
HM-LM765L-02SS
HM-LM765L-03SS
HM-LM765L-04SS
HM-LM765L-06SS
HM-LM765L-08SS
HM-LM765L-10SS
HM-LM765L-12SS
HM-LM765L-14SS
HM-LM765L-15SS
HM-LM765L-16SS
HM-LM765L-18SS
HM-LM765L-20SS
HM-LM765L-22SS
HM-LM765L-25SS
HM-LM765L-38SS
HM-LM765L-50SS
2
3
4
6
8
10
12
14
15
16
18
20
22
25
38
50
C765L
code
pipe O.D.
[inch]
HC-LC765L-01SS
HC-LC765L-02SS
HC-LC765L-03SS
HC-LC765L-04SS
HC-LC765L-05SS
HC-LC765L-06SS
HC-LC765L-08SS
HC-LC765L-10SS
HC-LC765L-12SS
HC-LC765L-14SS
HC-LC765L-16SS
HC-LC765L-20SS
HC-LC765L-24SS
HC-LC765L-32SS
1/16
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
7/8
1
1.1/4
1.1/2
2
903
Straight connector with NPT female thread for
metric pipe
Straight connector with NPT female thread for

imperial pipe
M766L
C766L
code
pipe O.D.
[mm]
thread size
[inch]
HM-LM766L-03-02SS
HM-LM766L-03-04SS
HM-LM766L-04-02SS
HM-LM766L-06-02SS
HM-LM766L-06-04SS
HM-LM766L-06-06SS
HM-LM766L-06-08SS
HM-LM766L-08-02SS
HM-LM766L-08-04SS
HM-LM766L-08-06SS
HM-LM766L-08-08SS
HM-LM766L-10-04SS
HM-LM766L-10-06SS
HM-LM766L-10-08SS
HM-LM766L-12-04SS
HM-LM766L-12-06SS
HM-LM766L-12-08SS
HM-LM766L-15-08SS
HM-LM766L-16-08SS
HM-LM766L-20-08SS
HM-LM766L-20-12SS
HM-LM766L-22-12SS
HM-LM766L-22-16SS
HM-LM766L-25-12SS
HM-LM766L-25-16SS
3
3
4
6
6
6
6
8
8
8
8
10
10
10
12
12
12
15
16
20
20
22
22
25
25
1/8
1/4
1/8
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/4
3/8
1/2
1/4
3/8
1/2
1/2
1/2
1/2
3/4
3/4
1
3/4
1
904
code
pipe O.D.
[inch]
thread size
[inch]
HC-LC766L-01-01SS
HC-LC766L-01-02SS
HC-LC766L-02-02SS
HC-LC766L-02-04SS
HC-LC766L-03-02SS
HC-LC766L-04-02SS
HC-LC766L-04-04SS
HC-LC766L-04-06SS
HC-LC766L-04-08SS
HC-LC766L-05-02SS
HC-LC766L-05-04SS
HC-LC766L-06-02SS
HC-LC766L-06-04SS
HC-LC766L-06-06SS
HC-LC766L-06-08SS
HC-LC766L-06-12SS
HC-LC766L-08-04SS
HC-LC766L-08-06SS
HC-LC766L-08-08SS
HC-LC766L-08-12SS
HC-LC766L-10-06SS
HC-LC766L-10-08SS
HC-LC766L-10-12SS
HC-LC766L-12-08SS
HC-LC766L-12-12SS
HC-LC766L-14-12SS
HC-LC766L-16-12SS
HC-LC766L-16-16SS
HC-LC766L-20-20SS
HC-LC766L-24-24SS
HC-LC766L-32-32SS
1/16
1/16
1/8
1/8
3/16
1/4
1/4
1/4
1/4
5/16
5/16
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
7/8
1
1
1.1/4
1.1/2
2
1/16
1/8
1/8
1/4
1/8
1/8
1/4
3/8
1/2
1/8
1/4
1/8
1/4
3/8
1/2
3/4
1/4
3/8
1/2
3/4
3/8
1/2
3/4
1/2
3/4
3/4
3/4
1
1.1/4
1.1/2
2
Straight connector with NPT male thread for

imperial pipe
Straight connector with NPT male thread for

metric pipe
C768L
M768L
code
pipe O.D.
[mm]
thread size
[inch]
HM-LM768L-02-02SS
HM-LM768L-03-02SS
HM-LM768L-03-04SS
HM-LM768L-04-02SS
HM-LM768L-04-04SS
HM-LM768L-06-02SS
HM-LM768L-06-04SS
HM-LM768L-06-06SS
HM-LM768L-06-08SS
HM-LM768L-08-02SS
HM-LM768L-08-04SS
HM-LM768L-08-06SS
HM-LM768L-08-08SS
HM-LM768L-10-02SS
HM-LM768L-10-04SS
HM-LM768L-10-06SS
HM-LM768L-10-08SS
HM-LM768L-10-12SS
HM-LM768L-12-02SS
HM-LM768L-12-04SS
HM-LM768L-12-06SS
HM-LM768L-12-08SS
HM-LM768L-12-12SS
HM-LM768L-14-04SS
HM-LM768L-14-06SS
HM-LM768L-14-08SS
HM-LM768L-15-08SS
HM-LM768L-16-06SS
HM-LM768L-16-08SS
HM-LM768L-16-12SS
HM-LM768L-18-08SS
HM-LM768L-18-12SS
HM-LM768L-20-08SS
HM-LM768L-20-12SS
HM-LM768L-22-12SS
HM-LM768L-22-16SS
HM-LM768L-25-08SS
HM-LM768L-25-12SS
HM-LM768L-25-16SS
HM-LM768L-38-24SS
HM-LM768L-50-32SS
2
3
3
4
4
6
6
6
6
8
8
8
8
10
10
10
10
10
12
12
12
12
12
14
14
14
15
16
16
16
18
18
20
20
22
22
25
25
25
38
50
1/8
1/8
1/4
1/8
1/4
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
3/4
1/8
1/4
3/8
1/2
3/4
1/4
3/8
1/2
1/2
3/8
1/2
3/4
1/2
3/4
1/2
3/4
3/4
1
1/2
3/4
1
1.1/2
2
code
pipe O.D.
[inch]
thread size
[inch]
HM-LC768L-01-01SS
HM-LC768L-01-02SS
HM-LC768L-01-04SS
HM-LC768L-02-01SS
HM-LC768L-02-02SS
HM-LC768L-02-04SS
HM-LC768L-02-06SS
HM-LC768L-02-08SS
HM-LC768L-03-02SS
HM-LC768L-03-04SS
HM-LC768L-04-01SS
HM-LC768L-04-02SS
HM-LC768L-04-04SS
HM-LC768L-04-06SS
HM-LC768L-04-08SS
HM-LC768L-04-12SS
HM-LC768L-05-02SS
HM-LC768L-05-04SS
HM-LC768L-05-06SS
HM-LC768L-06-02SS
HM-LC768L-06-04SS
HM-LC768L-06-06SS
HM-LC768L-06-08SS
HM-LC768L-06-12SS
HM-LC768L-06-16SS
HM-LC768L-08-02SS
HM-LC768L-08-04SS
HM-LC768L-08-06SS
HM-LC768L-08-08SS
HM-LC768L-08-12SS
HM-LC768L-08-12SS
HM-LC768L-10-04SS
HM-LC768L-10-06SS
HM-LC768L-10-08SS
HM-LC768L-10-12SS
HM-LC768L-12-06SS
HM-LC768L-12-08SS
HM-LC768L-12-12SS
HM-LC768L-12-16SS
HM-LC768L-14-08SS
HM-LC768L-14-12SS
HM-LC768L-14-16SS
HM-LC768L-16-08SS
HM-LC768L-16-12SS
HM-LC768L-16-16SS
HM-LC768L-20-16SS
HM-LC768L-20-20SS
HM-LC768L-24-24SS
HM-LC768L-32-32SS
1/16
1/16
1/16
1/8
1/8
1/8
1/8
1/8
3/16
3/16
1/4
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
7/8
7/8
7/8
1
1
1
1.1/4
1.1/4
1.1/2
2
1/16
1/8
1/4
1/16
1/8
1/4
3/8
1/2
1/8
1/4
1/16
1/8
1/4
3/8
1/2
3/4
1/8
1/4
3/8
1/8
1/4
3/8
1/2
3/4
1
1/8
1/4
3/8
1/2
3/4
1
1/4
3/8
1/2
3/4
3/8
1/2
3/4
1
1/2
3/4
1
1/2
3/4
1
1
1.1/4
1.1/2
2
905
90 elbow with NPT male thread for metric pipe
90 elbow with NPT male thread for imperial pipe
M769L
C769L
code
pipe O.D.
[mm]
thread size
[inch]
code
pipe O.D.
[inch]
thread size
[inch]
HM-LM769L-03-02SS
HM-LM769L-03-04SS
HM-LM769L-04-02SS
HM-LM769L-04-04SS
HM-LM769L-06-02SS
HM-LM769L-06-04SS
HM-LM769L-06-06SS
HM-LM769L-06-08SS
HM-LM769L-08-02SS
HM-LM769L-08-04SS
HM-LM769L-08-06SS
HM-LM769L-08-08SS
HM-LM769L-10-02SS
HM-LM769L-10-04SS
HM-LM769L-10-06SS
HM-LM769L-10-08SS
HM-LM769L-12-02SS
HM-LM769L-12-04SS
HM-LM769L-12-06SS
HM-LM769L-12-08SS
HM-LM769L-12-12SS
HM-LM769L-15-08SS
HM-LM769L-16-06SS
HM-LM769L-16-08SS
HM-LM769L-16-12SS
HM-LM769L-18-08SS
HM-LM769L-18-12SS
HM-LM769L-20-08SS
HM-LM769L-20-12SS
HM-LM769L-22-12SS
HM-LM769L-22-16SS
HM-LM769L-25-08SS
HM-LM769L-25-12SS
HM-LM769L-25-16SS
HM-LM769L-38-24SS
3
3
4
4
6
6
6
6
8
8
8
8
10
10
10
10
12
12
12
12
12
15
16
16
16
18
18
20
20
22
22
25
25
25
38
1/8
1/4
1/8
1/4
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/2
3/4
1/2
3/8
1/2
3/4
1/2
3/4
1/2
3/4
3/4
1
1/2
3/4
1
1.1/2
HM-LC769L-01-01SS
HM-LC769L-01-02SS
HM-LC769L-02-01SS
HM-LC769L-02-02SS
HM-LC769L-02-04SS
HM-LC769L-03-02SS
HM-LC769L-03-04SS
HM-LC769L-04-01SS
HM-LC769L-04-02SS
HM-LC769L-04-04SS
HM-LC769L-04-06SS
HM-LC769L-04-08SS
HM-LC769L-05-02SS
HM-LC769L-05-04SS
HM-LC769L-05-06SS
HM-LC769L-06-02SS
HM-LC769L-06-04SS
HM-LC769L-06-06SS
HM-LC769L-06-08SS
HM-LC769L-06-12SS
HM-LC769L-08-04SS
HM-LC769L-08-06SS
HM-LC769L-08-08SS
HM-LC769L-08-12SS
HM-LC769L-10-06SS
HM-LC769L-10-08SS
HM-LC769L-10-12SS
HM-LC769L-12-08SS
HM-LC769L-12-12SS
HM-LC769L-14-12SS
HM-LC769L-16-12SS
HM-LC769L-16-16SS
HM-LC769L-20-20SS
HM-LC769L-24-24SS
HM-LC769L-32-32SS
1/16
1/16
1/8
1/8
1/8
3/16
3/16
1/4
1/4
1/4
1/4
1/4
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
5/8
5/8
5/8
3/4
3/4
7/8
1
1
1.1/4
1.1/2
2
1/16
1/8
1/16
1/8
1/4
1/8
1/4
1/16
1/8
1/4
3/8
1/2
1/8
1/4
3/8
1/8
1/4
3/8
1/2
3/4
1/4
3/8
1/2
3/4
3/8
1/2
3/4
1/2
3/4
3/4
3/4
1
1.1/4
1.1/2
2
906
Tee with NPT male thread for metric pipe
Tee with NPT male thread for imperial pipe
M772L
code
pipe O.D.
[mm]
thread size
[inch]
HM-LM772L-06-02SS
HM-LM772L-06-04SS
HM-LM772L-08-02SS
HM-LM772L-08-04SS
HM-LM772L-10-04SS
HM-LM772L-12-04SS
HM-LM772L-12-06SS
HM-LM772L-12-08SS
HM-LM772L-16-08SS
6
6
8
8
10
12
12
12
16
1/8
1/4
1/8
1/4
1/4
1/4
3/8
1/2
1/2
Bulkhead straight connector for metric pipes
C772L
code
pipe O.D.
[inch]
thread size
[inch]
HM-LC772L-02-02SS
HM-LC772L-02-04SS
HM-LC772L-03-02SS
HM-LC772L-04-02SS
HM-LC772L-04-04SS
HM-LC772L-05-02SS
HM-LC772L-06-04SS
HM-LC772L-06-06SS
HM-LC772L-08-06SS
HM-LC772L-08-08SS
HM-LC772L-10-08SS
HM-LC772L-12-12SS
1/8
1/8
3/16
1/4
1/4
5/16
3/8
3/8
1/2
1/2
5/8
3/4
1/8
1/4
1/8
1/8
1/4
1/8
1/4
3/8
3/8
1/2
1/2
3/4
Bulkhead straight connector for imperial pipes
M774L
C774L
code
pipe O.D.
[mm]
code
pipe O.D.
[inch]
HM-LM774L-03SS
HM-LM774L-04SS
HM-LM774L-06SS
HM-LM774L-08SS
HM-LM774L-10SS
HM-LM774L-12SS
HM-LM774L-14SS
HM-LM774L-15SS
HM-LM774L-16SS
HM-LM774L-18SS
HM-LM774L-20SS
HM-LM774L-25SS
HM-LM774L-38SS
3
4
6
8
10
12
14
15
16
18
20
25
38
HM-LC774L-01SS
HM-LC774L-02SS
HM-LC774L-03SS
HM-LC774L-04SS
HM-LC774L-05SS
HM-LC774L-06SS
HM-LC774L-08SS
HM-LC774L-10SS
HM-LC774L-12SS
HM-LC774L-16SS
HM-LC774L-20SS
HM-LC774L-24SS
HM-LC774L-32SS
1/16
1/8
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
907
Many other elements of LET-LOK system are also available. In order to obtain more information, please contact
TUBES INTERNATIONAL Sales or Technical Department.
Reducing
connector
763L
Reducing tee
764LR
Reducing 90
elbow connector
765LR
Straight connector
BSPT female
thread
766LR
Straight connector
BSP female
thread
766LG
Reducing
adaptor
767LT
Reducing
connector
767LM
Straight
connector
767LP
Straight connector
BSPT male
thread
768LR
Straight connector
BSP male
thread
768LG
Straight connector
UNF male
thread
768LOB
Straight connector
weld-in
connection
768LN
Straight connector
weld-in
connection
768LW
90 elbow
BSPT
male thread
769LR
90 elbow
weld-in
connection
769LN
Reducing
90 elbow
769LT
90 elbow
NPT female
thread
770L
Tee (L type)
NPT male
thread
771L
Tee (L type)
NPT female
thread
771LF
Tee (T type)
NPT female
thread
772LF
Bulkhead straight
connector NPT
female thread
774LF
Bulkhead
reducing
adaptor
774LT
Bulkhead
connector
NPT male
thread
774LM
Bulkhead
reducing
connector
775L
Union cross
7102L
Adaptor
NPT female
thread
739LF
Adaptor
NPT male
thread
739LM
Adaptor
BSPT male
thread
739LMR
Adaptor
UNF male
thread
739LMOB
Adaptor
weld-in
connection
739LN
908
Threaded connectors
Threaded connectors, like LET-LOK connectors, are designed primarily for chemical, petrochemical, pharmaceutical and power industry, nuclear power plants and process engineering. Made of AISI 316 stainless steel and brass
with NPT threads from 1/16 up to 2.
Maximum working pressure [bar] for connectors with NPT and BSP(T) threads
thread size
[inch]
1/16
1/8
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
2
AISI 316
male thread
759
690
552
538
531
503
366
414
345
269
brass
female thread
462
448
455
366
338
317
303
345
317
269
90 elbow with NPT female thread
male thread
379
345
276
269
262
248
179
207
172
131
90 elbow with NPT male thread
100H
code
HM-P100H-02SS
HM-P100H-04SS
HM-P100H-06SS
HM-P100H-08SS
HM-P100H-12SS
HM-P100H-16SS
thread size
[inch]
1/8
1/4
3/8
1/2
3/4
1
Tee with NPT female thread
100HM
code
HM-P100HM-02SS
HM-P100HM-04SS
HM-P100HM-06SS
HM-P100HM-08SS
HM-P101H-02SS
HM-P101H-04SS
HM-P101H-06SS
HM-P101H-08SS
HM-P101H-12SS
HM-P101H-16SS
thread size
[inch]
1/8
1/4
3/8
1/2
Tee with NPT male thread
101H
code
female thread
228
221
228
179
165
159
152
172
159
131
thread size
[inch]
1/8
1/4
3/8
1/2
3/4
1
101HM
code
HM-P101HM-02SS
HM-P101HM-04SS
HM-P101HM-06SS
HM-P101HM-08SS
thread size
[inch]
1/8
1/4
3/8
1/2
909
Threaded connectors
Cross with NPT female thread
Symmetric tee with NPT female / male thread
102H
code
HM-P102H-02SS
HM-P102H-04SS
HM-P102H-06SS
HM-P102H-08SS
HM-P102H-12SS
HM-P102H-16SS
thread size
[inch]
1/8
1/4
3/8
1/2
3/4
1
Reducing straight adaptor with NPT male / female

thread
3600H
code
HM-P3600H-02SS
HM-P3600H-04SS
HM-P3600H-06SS
HM-P3600H-08SS
thread size
[inch]
1/8
1/4
3/8
1/2
Straight adaptor with NPT male / female thread
110H
code
HM-P110H-02-01SS
HM-P110H-04-02SS
HM-P110H-06-02SS
HM-P110H-06-04SS
HM-P110H-08-02SS
HM-P110H-08-04SS
HM-P110H-08-06SS
HM-P110H-12-04SS
HM-P110H-12-06SS
HM-P110H-12-08SS
HM-P110H-16-04SS
HM-P110H-16-06SS
HM-P110H-16-08SS
HM-P110H-16-12SS
HM-P110H-20-08SS
HM-P110H-20-12SS
HM-P110H-20-16SS
HM-P110H-24-08SS
HM-P110H-24-12SS
HM-P110H-24-16SS
HM-P110H-24-20SS
HM-P110H-32-08SS
HM-P110H-32-12SS
HM-P110H-32-16SS
HM-P110H-32-20SS
HM-P110H-32-24SS
910
male
thread size
[inch]
1/8
1/4
3/8
3/8
1/2
1/2
1/2
3/4
3/4
3/4
1
1
1
1
1.1/4
1.1/4
1.1/4
1.1/2
1.1/2
1.1/2
1.1/2
2
2
2
2
2
female
thread size
[inch]
1/16
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1/2
3/4
1
1/2
3/4
1
1.1/4
1/2
3/4
1
1.1/4
1.1/2
120H
code
HM-P120H-02-01SS
HM-P120H-02-02SS
HM-P120H-04-02SS
HM-P120H-04-04SS
HM-P120H-06-02SS
HM-P120H-06-04SS
HM-P120H-06-06SS
HM-P120H-08-02SS
HM-P120H-08-04SS
HM-P120H-08-06SS
HM-P120H-08-08SS
HM-P120H-12-04SS
HM-P120H-12-06SS
HM-P120H-12-08SS
HM-P120H-12-12SS
HM-P120H-16-04SS
HM-P120H-16-08SS
HM-P120H-16-12SS
HM-P120H-16-16SS
female
thread size
[inch]
1/8
1/8
1/4
1/4
3/8
3/8
3/8
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
1
1
1
1
male
thread size
[inch]
1/16
1/8
1/8
1/4
1/8
1/4
3/8
1/8
1/4
3/8
1/2
1/4
3/8
1/2
3/4
1/4
1/2
3/4
1
Threaded connectors
Straight connector with NPT male thread
Straight connector with NPT female thread
122H
code
HM-P122H-01SS
HM-P122H-02SS
HM-P122H-04SS
HM-P122H-06SS
HM-P122H-08SS
HM-P122H-12SS
HM-P122H-16SS
thread size
[inch]
1/16
1/8
1/4
3/8
1/2
3/4
1
103H
code
HM-P103H-02SS
HM-P103H-04SS
HM-P103H-06SS
HM-P103H-08SS
HM-P103H-12SS
HM-P103H-16SS
thread size
[inch]
1/8
1/4
3/8
1/2
3/4
1
Pipe union
male / female
NPT thread
104H
Blank plug
NPT male
thread
107H
Blank plug
NPT male
thread
121H
Blank plug
UNF male
thread
107HOB
Blank plug
UNF male
thread
121HOB
Blank cap
NPT female
thread
108H
Reducing adaptor
male / female
UNF thread
110HOB
Reducing adaptor
NPT female
thread
119H
90 elbow
male / female
NPT thread
116H
Straight long
connector NPT
male thread
113H
Straight connector
NPT / BSPT
male thread
122HNR
Straight connector
NPT / BSP
male thread
122HNG
Straight connector
NPT / UNF
male thread
122HNOB
Straight connector
NPT male thread
122HCN
Reducing connector
NPT male thread
123H
Adaptor
NPT female thread
/ BSPT male thread
120HNR
Adaptor
NPT female thread
/ BSP male thread
120HNG
Adaptor
NPT female thread
/ UNF male thread
120HNOB
Adaptor
BSPT female thread
/ NPT male thread
120HRN
Adaptor
BSP female thread
/ NPT male thread
120HGN
Fitting
NPT male
thread
130HM
Fitting
NPT female
thread
130HF
Pipe fitting
with hose tail
130LT
Tee
NPT male
/ female thread
3750H
911
INSTRUMENTATION - valves
Top grade, precision valves of different types (ball, needle, check valves and many other) used in control and
measuring equipment for chemical, petrochemical, pharmaceutical and power industry, nuclear power plants and
process engineering. Available in many different versions depending on working temperature, pressure and connection size. Made of AISI 316 stainless steel as a standard.
Ball valves
Ball valves are used to fully open or close the flow path. Should not be used in the intermediate position.
The construction of ball valve (on the example of H-6800 series valve):
panel mounting option
stem sealing:
PTFE, PEEK
connections:
LET-LOK , male and female threads
body sealing:
PTFE, PEEK
ball sealing:
TFM, PCTFE, PEEK
Types of main seals (ball) used in ball valves:

valve type
working temperature
range
H-6800
H-500
H-700
H-6800
H-6800
H-500
PFA
H-800
from -54C do -149C
Modified PTFE with the same chemical and temperature resistance, but with better mechanical properties.
PTFE
H-500
Very good resistance to chemicals, aging, hydrolysis and weather conditions. Low coefficient of friction. Perfect sealing material
for general purpose application.
SS PTFE
H-500
PTFE filled with stainless steel powder. It has better temperature and pressures properties, lower deformation factor with the
same chemical resistance as standard PTFE.
material
TFM1600
PCTFE
PEEK
912
characteristics and seals applications

Modified PTFE with the same chemical resistance, but with better pressure characteristics. Compared to standard PTFE, it undergoes less deformation under pressure load and has greater
ability to regain its original shape once the pressure load is removed.
Modified PTFE with the same chemical resistance. Recommended for low temperature applications e.g. nitrogen or oxygen.
Very good resistance to chemicals and hydrolysis, very high mechanical strength and dimensional stability. Retains rigidity and
shape in its working temperature range.
Needle valves
Needle valves (depending on the type of a valve and stem) may be used to fully open and close the flow path, to
regulate the flow rate or to dose the media.
The construction of needle valve (on the example of H-300 series valve):
stem types (needles)

C
B
A
panel mounting option

connections:
stem seal: PTFE
Four types of stems used in H-300 series needle valves:

- A - regulating stem,
- B - standard V-stem type, close-open valve position,
- C - with non-rotating stem, reduces friction, recommended for high pressure gases and large number of cycles,
- D - with non-rotating stem with soft removable seal, assures lower torque when tightening, recommended for
high pressure gases of high purity.
Check, release and excess flow valves

Check valves open flow in one direction at the set difference between pressure values. Release valves (overflow)
open the flow when pressure in the system rises above the set value. Excess flow valves close the flow if pressure
drops behind the valve, when e.g. installation bursts. All these valves are equipped with springs calibrated for a
defined pressure value.
The construction of check valve (on the example of H-400 series valve):
sealing:
Viton, NBR, EPDM,
CR, Kalrez, PTFE
opening pressure (PSI):

1/3, 1, 3, 5, 10, 25, 50
connections:
913
Ball valve H-6800 type
Body material:
Ball material:
Ball seal:
Working temp.:
AISI 316 (brass - option)

AISI 316
TFM1600 (PCTFE, PEEK - option)
TFM1600
- up to +210C
PCTFE
- up to +140C
PEEK
- up to +260C
Connection:
LET-LOK type connectors,
NPT, BSPT, BSP threads
Working press.: TFM1600
- up to 206 bar
PCTFE, PEEK - up to 410 bar
High pressure two-way ball valve designed to be assembled in an installation or for panel mounting. Lever made of
Nylon (black as standard, blue, red, green and yellow and metal lever available on request). ISLT version equipped
with a padlock used to lock the position of the lever. Available also as a two-way 90 version or three-way version
(bottom inlet). Pneumatic control available on request. All valves are pressure tested before shipment.
code
connection
size
HM-H6800-SS-LM-03-PSS
3 mm
6 mm
8 mm
10 mm
12 mm
18 mm
HM-H6800-SS-LC-01-PSS
1/16
1/8
1/4
3/8
1/2"
3/4"
HM-H6810-SS-N-02-PSS
1/8
1/4
3/8
1/2
3/4"
HM-H6810-SS-R-02-PSS
1/8
1/4
3/8
1/2"
3/4"
1/8
1/4
3/8
1/2"
3/4"
914
flow diameter
[mm]
seal
LET-LOK metric connectors

2,4
4,8
4,8
TFM1600
4,8
10,3
10,3
LET-LOK imperial connectors
1,3
2,4
4,8
TFM1600
4,8
10,3
10,3
NPT female thread
4,8
4,8
4,8
TFM1600
10,3
10,3
BSPT female thread
4,8
4,8
4,8
TFM1600
10,3
10,3
NPT male thread
4,8
4,8
4,8
TFM1600
10,3
10,3
length
[mm]
body
material
78,6
83,6
84,8
86,4
102,5
102,5
AISI 316
70,2
78,6
83,6
86,3
102,5
102,5
AISI 316
63,6
63,6
69,6
87,4
91
AISI 316
63,6
63,6
69,6
87,4
91
AISI 316
67,6
76,6
76,6
92,4
94,4
AISI 316
Ball valve H-700 type
Body material:
Ball material:
Ball seal:
Working temp.:
Connection:
AISI 316
AISI 316
TFM1600
Up to +204C
LET-LOK type connectors,
Middle pressure two-way ball valve for general purpose application. Features compact construction, relatively high
flow rate, low torque and long service life. Standard lever with position blocking system. Available with butterfly
lever as well. All valves are pressure tested before shipment.
code
HM-H700-SS-LM-06-TLD
HM-H700-SS-LC-04-TLD
HM-H710-SS-N-04-TLD
HM-H710-SS-N-06-TLD
HM-H710-SS-N-08-TLD
HM-H780-SS-N-04-TLD
HM-H780-SS-N-06-TLD
HM-H780-SS-N-08-TLD
HM-H795-SS-LCN-04-04-TLD
connection
size
flow diameter
[mm]
seal
LET-LOK metric connectors

6 mm
5
8 mm
7
10 mm
9,2
TFM1600
12 mm
12,5
25 mm
15
LET-LOK imperial connectors
1/4"
5
3/8
7
1/2"
9,2
TFM1600
3/4"
12,5
1
15
NPT female thread
1/4"
5
3/8
7
TFM1600
1/2"
9
NPT male thread
1/4"
5
3/8
7
TFM1600
1/2"
9,2
NPT male thread / LET-LOK imperial connectors
1/4
5
3/8
7
TFM1600
1/2
9,2
length
[mm]
body
material
90
90
95,3
113,4
129,6
AISI 316
90
90
95,3
113,4
129,6
AISI 316
50
60
75
AISI 316
50,3
62,2
74,9
AISI 316
70,15
82,3
85,1
AISI 316
Other ball valves

H-500
H-800
Middle pressure 2-way 3-piece ball valve for general purpose application, made of AISI
316 steel. Sizes from 1/4 up to 1 with LET-LOK, threaded connectors and welding
ends. Working pressure up to 204 bar. Working temperature up to +232C.
Middle pressure ball mini-valve for general purpose application, also for panel mounting.
Sizes from 1/16 up to 1/2 with LET-LOK, and threaded connectors. Working pressure
up to 206 bar. Working temperature up to +149C. Available as 90 elbow version and
as 3-way ball valve (bottom inlet).
915
Check valve H-400 type
Body material:
Seal:
AISI 316 (brass - option)

O-ring Viton (NBR, EPDM, CR,
Kalrez, PTFE - option)
Working temp.: From -23C up to +190C (Viton)
Connection:
LET-LOK connectors,
Check valve designed for instrumentation applications. Closed as a rule, the valve opens when the pressure difference between inlet and outlet is higher than the valve opening pressure (depending on a spring applied). The
valves are set with one of the opening pressure values: 1/3 PSI (0.02 bar), 1 PSI (0.06 bar), 10 PSI (0.68 bar),
25 PSI (1.7 bar) or 50 PSI (3.4 bar). H-400 series comprises 5 groups of valves: basic H-400, high pressure H400HP (up to 410 bar), one-piece H-400OP, H-400OPA and H-400A with adjustable opening pressure. All valves
are pressure tested before shipment.
code
connection
size
HM-H400-SS-LM-06-1/3
HM-H400-SS-LM-10-1/3
HM-H400-SS-LM-12-1/3
6 mm
10 mm
12 mm
HM-H400-SS-LC-02-1/3
HM-H400-SS-LC-04-1/3
HM-H400-SS-LC-06-1/3
HM-H400-SS-LC-08-1/3
HM-H400-SS-LC-12-1/3
HM-H400-SS-LC-16-1/3
1/8"
1/4
3/8"
1/2"
3/4
1
HM-H410-SS-N-02-1/3
HM-H410-SS-N-04-1/3
HM-H410-SS-N-06-1/3
HM-H410-SS-N-08-1/3
HM-H410-SS-N-12-1/3
HM-H410-SS-N-16-1/3
1/8
1/4
3/8
1/2
3/4"
1
nominal opening
pressure
seal
length
[mm]
body
material
Viton
60,5
64
77
AISI 316
Viton
56
60,5
63,5
77
88,5
120
AISI 316
Viton
44
52,5
51,5
76,5
86
107
AISI 316
LET-LOK metric connections

1/3 PSI
(0,02 bar)
LET-LOK imperial connections

1/3 PSI
(0,02 bar)
NPT female thread
1/3 PSI
(0,02 bar)
Other check valves

H-900
H-900 HP
H-911
916
Low pressure release valve made of AISI 316 steel for general purpose application. 1/4
size with LET-LOK connectors and threaded connections. Working pressure up to 15.5
bar. Working temperature up to +148C.
High pressure release valve made of AISI 316 steel for general purpose application. 1/4
size with LET-LOK connectors and threaded connections. Working pressure up to 410
High pressure emergency excess flow valve. Sizes from 1/8 to 1/2. With LET-LOK
connectors and threaded connections. Working pressure up to 410 bar. Working temperature up to +204C.
Needle valve H-99, H-99HP type
Body material:
Stem material:
Valve seal:
Throttle seal:
Working temp.:
AISI 316
AISI 316
Metal / metal (AISI 316)
PTFE, carbon fibre (CF)
Up to +204C (PTFE)
Up to +600C (CF)
Connection:
LET-LOK connectors, NPT, BSPT,
BSP threads, welding ends
Working press.: H-99
- up to 410 bar
H-99 HP - up to 690 bar
High pressure needle valve designed to be assembled in an installation or for panel mounting. Used mainly in
heavy duty conditions, for taking samples, shutting off the flow and testing equipment. As a standard equipped
with V-type stem (close-open valve position). Versions with a regulating or non-rotating stem are also available.
All valves are pressure tested before shipment.
code
connection
size
HM-H99-SS-NV-02
HM-H99-SS-NV-04
HM-H99-SS-NV-06
HM-H99-SS-NV-08
HM-H99-SS-NV-12
HM-H99-SS-NV-16
1/8
1/4
3/8
1/2"
3/4"
1
code
connection
size
HM-H99HP-SS-LMV-06
HM-H99HP-SS-LMV-08
HM-H99HP-SS-LMV-10
HM-H99HP-SS-LMV-12
HM-H99HP-SS-LCV-04
HM-H99HP-SS-LCV-06
HM-H99HP-SS-LCV-08
HM-H99HP-SS-LCV-12
HM-H99HP-SS-NV-02
HM-H99HP-SS-NV-04
HM-H99HP-SS-NV-06
HM-H99HP-SS-NV-08
HM-H99HP-SS-NV-12
HM-H99HP-SS-NV-16
flow diameter
[mm]
NPT female thread
5
5
5
5
6
8
flow diameter
[mm]

6 mm
5
8 mm
5
10 mm
5
12 mm
5
1/4"
5
3/8
5
1/2"
5
3/4"
6
NPT female thread
1/8
5
1/4
5
3/8
5
1/2"
5
3/4"
6
1
8
throttle seal
length
[mm]
PTFE
58
58
58
65
70
80
seal
throttle seal
length
[mm]
PTFE
72,8
73
73,2
78,2
PTFE
72,7
72,7
78,3
85,3
PTFE
58
58
58
65
70
80
917
Needle valve H-300 type
Body material:
Stem material:
Valve seal:
Throttle seal:
Working temp.:
Connection:
AISI 316
AISI 316
Metal / metal (AISI 316)
PTFE
Up to +230C
LET-LOK connectors,
High pressure needle valve designed to be assembled in an installation or for panel mounting. Features compact
construction and relatively high flow rate. Two versions: straight and 90 elbow. As a standard equipped with V-type
stem (close-open valve position). Versions with a regulating stem or non-rotating stem with soft, non-rotating seal
are available on request. All valves are pressure tested before shipment.
code
HM-H300-SS-LM-03-VRS
HM-H300-SS-LC-02-VRS
HM-H310-SS-N-02-VRS
HM-H310-SS-N-04-VRS
HM-H310-SS-N-06-VRS
HM-H310-SS-N-08-VRS
HM-H380-SS-N-02-VRS
HM-H380-SS-N-04-VRS
HM-H380-SS-N-06-VRS
HM-H380-SS-N-08-VRS
connection
size
flow diameter
[mm]

3 mm
2
6 mm
4,4
8 mm
4,4
10 mm
6,4
12 mm
6,4
1/8
2
1/4
4,4
3/8
6,4
1/2"
6,4
3/4"
9,5
NPT female thread
1/8
4,4
1/4
6,4
3/8
9,5
1/2"
9,5
NPT male thread
1/8
4,4
1/4
4,4
3/8
6,4
1/2"
9,5
steam
length
[mm]
V-steam
50,8
58,8
58,8
66,4
76,2
V-steam
50,8
58,8
66
71,6
97
V-steam
41,2
54,0
76,2
76,2
V-steam
50,8
50,8
57
76,2
Other needle valves

H-1200
Low pressure toggle valve made of AISI 316 steel or brass. Full flow opens with 90 lift
of the lever. When the lever is pushed down, the valve is closed by the spring. 1/8 and
1/4sizes with LET-LOK connectors and threaded connections. Working pressure 21
H-1300
Middle pressure metering valve for general purpose application. Suitable for panel mounting. Sizes from 1/8 to 3/8 with LET-LOK connectors and threaded connections.
Working pressure up to 138 bar. Working temperature to +204C. Also available in 90
elbow version.
918
Needle valve SM-1000 type
Body material:
Stem material:
Valve seal:
Throttle seal:
Working temp.:
AISI 316L
AISI 316L
Metal / metal (AISI 316L)
PTFE (Graphoil - option)
PTFE
- from -73C up to +230C
Graphoil
- from -54C up to +510C
Connection:
NPT, BSP thread
High pressure needle valve. As a standard equipped with self-centring, non-rotating stem (needle) extending service life of metal sealing surface and ensuring leak tightness at large number of cycles. In working temperature
above +150C (above +100C for Graphoil graphite sealing) the maximum working pressure of 690 bar must be
reduced in consultation with TUBES INTERNATIONAL Sales or Technical Department. All valves are pressure
tested and marked before shipment.
code
SM-1000A11AA
SM-1000B11AA
SM-1000C11AA
SM-1000D11AA
SM-1000E11AA
thread
size
[inch]
1/4
3/8
1/2
3/4
1
dimensions [mm]
DN
[mm]
weight
[kg]
4
4
4
4
6,5
30
30
30
40
50
60
60
60
65
75
89
89
89
99
109
0,48
0,48
0,48
0,70
1,10
Also available:
- other types of needle valves of SM-1000 series (valves with drainage, with male thread at the inlet, with three
outlets and 90 valves).
- valve blocks (2, 3, 4 and 5 valves), based on the SM-1000 valve series, with female thread, male thread and
flanged,
- SM-1000 needle valves and valve blocks made of other materials (Monel, Hastelloy, Inconel, titanium, Duplex
steel and many other).
919
MEASURING SYSTEMS - measuring couplings

MCS (Mini Control System) allows to build simple measuring sets to check pressure in hydraulic systems. The
measurement can be performed even if the hydraulic system is working at the maximum pressure (up to 630 bar).
Connecting elements are designed to allow connection without leaks and without additional tools. To be connected
permanently or for the time of measurement. A wide range of measuring connectors, adaptors, hoses and other
accessories helps to manage any connection.
Example of a simple measuring set connected to hydraulic installation
rubber protection
code: TA-M-100-40
measuring hose assembly:
pressure gauge 0 400 bar

code: FM-631-400
fitting with 1/4 female thread for

pressure gauge assembled on
DN2 hose
code: PS-801.50.204.00
thermoplastic hose DN2
working pressure 630 bar
code: ZC-TEST8-5021
test fitting DN2 with M16 x 1.5 female
thread with additional plastic blank plug
assembled on hose
code: PS-801.10.162.00
test fitting with M16 x 2 thread according to
DIN 2353 and additional metal blank plug
code: PS-620.04.015.51
920
MCS miniature couplings 620 series

Material:
Galvanized steel
(AISI 316 available on request)
Working temp.: From -30C up to +120C (NBR seal)
From -20C up to +200C (Viton seal)
From -30C up to +100C (with PVC blank cap)
description
press.
[bar]
Test fitting M16x2

400
630
400
630
400
630
400
630
250
630
code
(with PVC cap)
code
(with steel cap)
PS-620.01.010.50
PS-620.01.010.51
PS-620.01.204.50
PS-620.01.204.51
PS-620.01.012.10
PS-620.01.012.11
PS-620.01.202.10
PS-620.01.202.11
PS-620.01.204.10
PS-620.01.204.11
PS-620.01.010.30
PS-620.01.010.31
PS-620.01.202.30
PS-620.01.202.31
PS-620.01.204.30
PS-620.01.204.31
PS-620.01.206.30
PS-620.01.206.31
PS-620.01.302.30
PS-620.01.302.31
PS-620.01.304.30
PS-620.01.306.30
type of
sealing
L
[mm]
J
[mm]
8
12
B
38
M12x1,5
1/8 BSP
12
1/4 BSP
12
36
M10x1
1/4 BSP
thread
size G
M10x1
1/8 BSPT
1/4 BSPT
3/8 BSPT
9,5
1/8-27 NPTF
PS-620.01.304.31
14
1/4-18 NPTF
PS-620.01.306.31
14,2
3/8-18 NPTF
PS-620.01.010.20
PS-620.01.010.21
PS-620.01.012.20
PS-620.01.012.21
PS-620.01.014.20
PS-620.01.014.21
PS-620.01.016.20
PS-620.01.016.21
PS-620.01.202.20
PS-620.01.202.21
PS-620.01.204.20
PS-620.01.204.21
PS-620.01.206.20
PS-620.01.206.21
PS-620.01.008.00
PS-620.01.008.01
PS-620.01.010.00
PS-620.01.010.01
PS-620.01.014.00
PS-620.01.014.01
PS-620.01.404.00
PS-620.01.404.01
PS-620.01.405.00
PS-620.01.405.01
PS-620.01.406.00
PS-620.01.406.01
12
9/16-18 UNF
PS-620.01.408.00
PS-620.01.408.01
14
3/4-16 UNF
PS-620.01.204.00
PS-620.01.204.01
PS-620.01.204.80
PS-620.01.204.81
M10x1
M12x1,5
12
M14x1,5
1/8 BSP
M16x1,5
12
38
60 cone
3/8 BSP
8,5
M8x1
9,5
M10x1
12
F
1/4 BSP
11
12
M14x1,5
7/16-20 UNF
1/2-20 UNF
1/4 JIS
1/4 BSP
Types of connection seals
A type
B type
C type
E type
F type
921

description
press.
[bar]
L
[mm]
thread
size G
65
M12x1,5
66,5
M14x1,5
PS-620.02.010.61
10
67
M16x1,5
PS-620.02.012.60
PS-620.02.012.61
12
58
M18x1.5
PS-620.02.015.60
PS-620.02.015.61
15
60
M22x1.5
PS-620.02.018.60
PS-620.02.018.61
18
61
M26x1,5
PS-620.02.022.60
PS-620.02.022.61
22
59,5
M30x2
PS-620.02.028.60
PS-620.02.028.61
28
66
M36x2
PS-620.02.035.60
PS-620.02.035.61
35
71,5
M45x2
PS-620.02.042.60
PS-620.02.042.61
42
74,5
M52x2
PS-620.02.106.60
PS-620.02.106.61
65
M14x1,5
PS-620.02.108.60
PS-620.02.108.61
66,5
M16x1,5
PS-620.02.110.60
PS-620.02.110.61
10
67
M18x1.5
PS-620.02.112.60
PS-620.02.112.61
12
58
M20x1,5
PS-620.02.114.60
PS-620.02.114.61
14
58,5
M22x1.5
PS-620.02.116.60
PS-620.02.116.61
16
61,5
M24x1,5
PS-620.02.120.60
PS-620.02.120.61
20
60,5
M30x2
PS-620.02.125.60
PS-620.02.125.61
25
65,5
M36x2
PS-620.02.130.60
PS-620.02.130.61
30
67,5
M42x2
315
PS-620.02.138.60
PS-620.02.138.61
38
69,5
M52x2
press.
[bar]
code
(with PVC cap)
code
(with steel cap)
pipe d diameter
[mm]
PS-620.03.006.50
PS-620.03.006.51
PS-620.03.008.50
PS-620.03.008.51
PS-620.03.010.50
PS-620.03.010.51
10
PS-620.03.012.50
PS-620.03.012.51
12
press.
[bar]
code
(with PVC cap)
code
(with steel cap)
L
[mm]
thread
size G
450
PS-620.05.404.00
PS-620.05.404.01
64
7/16-20 UNF
420
PS-620.05.405.00
PS-620.05.405.01
67
1/2-20 UNF
PS-620.05.406.00
PS-620.05.406.01
69
9/16-18 UNF
PS-620.05.408.00
PS-620.05.408.01
71
3/4-16 UNF
Test fitting M16x2 according

to DIN 3865, 24 cone
315
160
630
400
description
Test fitting M16x2 and pipe

connection
code
(with PVC cap)
code
(with steel cap)
PS-620.02.006.60
PS-620.02.006.61
PS-620.02.008.60
PS-620.02.008.61
PS-620.02.010.60
pipe d diameter
[mm]
series
L
[mm]
L1
[mm]
20
57
26
60
630
description
Test fitting M16x2
350
922

description
Test fitting M16x2 and pipe

connection according to
DIN 2353
press.
[bar]
code
(with PVC cap)
code
(with steel cap)
PS-620.04.006.50
PS-620.04.006.51
PS-620.04.008.50
PS-620.04.008.51
PS-620.04.010.50
PS-620.04.010.51
10
PS-620.04.012.50
PS-620.04.012.51
12
PS-620.04.015.50
PS-620.04.015.51
15
PS-620.04.018.50
PS-620.04.018.51
PS-620.04.022.50
PS-620.04.022.51
22
71
PS-620.04.028.50
PS-620.04.028.51
28
69
PS-620.04.035.50
PS-620.04.035.51
35
PS-620.04.042.50
PS-620.04.042.51
42
PS-620.04.106.50
PS-620.04.106.51
58
PS-620.04.108.50
PS-620.04.108.51
59
PS-620.04.110.50
PS-620.04.110.51
10
PS-620.04.112.50
PS-620.04.112.51
12
PS-620.04.114.50
PS-620.04.114.51
14
PS-620.04.116.50
PS-620.04.116.51
PS-620.04.120.50
PS-620.04.120.51
20
78
PS-620.04.125.50
PS-620.04.125.51
25
82
PS-620.04.130.50
PS-620.04.130.51
30
91
27
M42x2
315
PS-620.04.138.50
PS-620.04.138.51
38
100
29
M52x2
press.
[bar]
code
(with PVC cap)
code
(with steel cap)
pipe d diameter
[mm]
L
[mm]
thread
size G
PS-620.06.108.50
PS-620.06.108.51
82
M16X1,5
PS-620.06.110.50
PS-620.06.110.51
10
84
M18x1.5
press.
[bar]
code
(with PVC cap)
code
(with steel cap)
L
[mm]
thread
size G
630
PS-620.07.204.80
PS-620.07.204.81
62
1/4 BSP
315
160
630
400
description
Test fitting M16x2 for bulkhead connector according

to DIN 3861
series
pipe d diameter
[mm]
18
16
L
[mm]
L1
[mm]
54
20
59
22
64
80
63
thread
size G
M12x1,5
M14x1,5
M16x1,5
M18x1.5
M22x1.5
M26x1,5
25
M30x2
26
M36x2
25
M45x2
27
M52x2
M14x1,5
M16x1,5
24
M18x1.5
M20x1,5
M22x1.5
71
M24x1,5
25,5
M30x2
M36x2
630
description
Test fitting with M16x2 and

female thread according to
BS 5200
923

description
press.
[bar]
code
(with PVC cap)
code
(with steel cap)
L
[mm]
thread
size G
630
PS-620.11.000.70
PS-620.11.000.71
81
M16x1
Bulkhead test fitting M16x2
description
press.
[bar]
Pressure gauge M16x2

(bulkhead)
code
(free flow)
code
(with pressure damper)
L
[mm]
thread
size G
PS-620.08.204.00
PS-620.08.204.00.1
50
1/4 BSP
PS-620.08.208.00
PS-620.08.208.00.1
58
1/2 BSP
PS-620.08.304.00
PS-620.08.304.00.1
50
1/4 NPTF
PS-620.08.308.00
PS-620.08.308.00.1
58
1/2 NPTF
code
(free flow)
code
L
[mm]
thread
size G
PS-620.09.204.00
PS-620.09.204.00.1
34
1/4 BSP
PS-620.09.208.00
PS-620.09.208.00.1
39
1/2 BSP
PS-620.09.304.00
PS-620.09.304.00.1
34
1/4 NPTF
630
description
press.
[bar]
Pressure gauge M16x2
630
924

description
press.
[bar]
code
(free flow)
code
L
[mm]
L1
[mm]
thread
size G
PS-620.10.204.00
PS-620.10.204.00.1
40
40
1/4 BSP
PS-620.10.208.00
PS-620.10.208.00.1
40
42,7
1/2 BSP
code
(with PVC cap)
code
(with steel cap)
L
[mm]
PS-620.16.204.80
PS-620.16.204.81
53
PS-620.16.206.80
PS-620.16.206.81
90 pressure gauge M16x2

swivel connection
630
description
press.
[bar]
Test fitting M16x2
400
345
description
PS-620.16.208.80
PS-620.16.208.81
PS-620.16.212.80
PS-620.16.212.81
68
PS-620.16.216.80
PS-620.16.216.81
74
PVC blank cap
description
met.
thread
size G
1/4 BSP
51,5
60
code
h [mm]
PVC
3/8 BSP
55
1/2 BSP
59,5
54
3/4 BSP
59,5
1 BSP
code
Steel blank cap

PS-630.03.620.00
PS-630.03.162.03
925

description
press.
[bar]
code
(with PVC cap)
code
(with steel cap)
PS-612.01.204.20
type of
sealing
L
[mm]
J
[mm]
thread
size G
Test fitting S12.65x1.5
630
description
32
1/4 BSP
10
PS-612.01.204.21
29
1/4 BSP
press.
[bar]
code
(with PVC cap)
code
(with steel cap)
type of
sealing
L
[mm]
J
[mm]
thread
size G
630
PS-615.01.204.21
38
10
1/4 BSP
press.
[bar]
code
(with PVC cap)
code
(with steel cap)
type of
sealing
L
[mm]
J
[mm]
thread
size G
PS-616.01.202.21
Test fitting M16x1.5
description
Test fitting 5/8 BSF (JCB)
420
926
PS-616.01.204.21
1/8 BSP
1/4 BSP
MEASURING SYSTEMS - hoses

089
Internal layer:
Reinforcement:
External layer:
Working temp.:
Polyester
Aramid braid
Characteristics: Lightweight, flexible hose designed for hydraulic oil systems, solvents and paint. Used in control
and measuring systems. Pinpricked as a standard.
code
I.D.
[mm]
O.D.
[mm]
TO-089A-02
TO-089C-04
2
4
5
8
working
pressure
[bar]
630
630
bursting
pressure
[bar]
1900
1900
TEST 7
Internal layer:
Reinforcement:
External layer:
Working temp.:
bending
radius
[mm]
20
40
weight
[kg/100 m]
2,00
4,50
Polyester
Polyester braid
Characteristics: Lightweight, flexible hose designed for water-based liquids, solvents, hydraulic oil and paint.
Used in hydraulic control and measuring systems. Pinpricked version available on request (for
gases and air).
code
I.D.
[mm]
O.D.
[mm]
ZC-TEST7-5021
ZC-TEST7-5521
ZC-TEST7-5526
2,1
2,1
2,6
5
5,5
5,5
working
pressure
[bar]
265
265
265
TEST 8
bursting
pressure
[bar]
800
800
800
Internal layer:
Reinforcement:
External layer:
Working temp.:
bending
radius
[mm]
20
20
20
weight
[kg/100 m]
2,10
2,20
2,20
Polyester
Aramid braid
Characteristics: Lightweight, flexible hose designed for water based liquids, solvents, hydraulic oil and paint.
Used in hydraulic control and measuring systems. Pinpricked version available on request (for
gases and air).
code
I.D.
[mm]
O.D.
[mm]
ZC-TEST8-5021
ZC-TEST8-8040
2,1
4
5
8
working
pressure
[bar]
630
550
bursting
pressure
[bar]
1890
1650
bending
radius
[mm]
20
35
weight
[kg/100 m]
1,90
4,40
927
MEASURING SYSTEMS - hose fittings

Fittings described below are designed for 2x5 mm hose (801 type) and 4x8 mm (804 type). To select proper fittings
for hoses with different diameters, please contact TUBES INTERNATIONAL Technical Department.
Crimping ferrule
Test fitting, female thread
801.10
804.10
800.00
press.
[bar]
-
code
L
[mm]
d
[mm]
PS-800.00.002.00
14
PS-800.00.004.00
17
11,5
press.
[bar]
630
500
code
L
[mm]
thread
size d1
PS-801.10.161.00
22
M16x1,5
PS-801.10.162.00
22
M16x2
PS-810.10.162.00*
22
M16x2
PS-804.10.162.00
22
M16x2
* - AISI 316 steel
Test fitting, push-in connection
Pipe fitting
801.30
804.30
801.20
press.
[bar]
code
L
[mm]
d
[mm]
400
PS-801.20.000.00
19
3,3
press.
[bar]
Pipe fitting, female thread (with cutting ring),

24 cone
code
L
[mm]
d
[mm
PS-801.30.004.00
26
PS-801.30.006.00
25
PS-801.30.008.00
25
PS-804.30.004.00
29
PS-804.30.006.00
29
PS-804.30.008.00
29
90 elbow pipe fitting
801.31
801.32
press.
[bar]
code
L
[mm]
d
[mm]
thread
size d1
315
PS-801.31.006.00
26
M12x1,5
630
PS-801.32.006.00
26
M14x1,5
315
PS-801.31.008.00
26
M14x1,5
630
PS-801.32.008.00
26
M16x1,5
928
801.35
press.
[bar]
-
code
L
[mm]
d
[mm
PS-801.35.004.00
23
PS-801.35.006.00
22
PS-801.35.008.00
31

90 elbow, female thread (with cutting ring), 24
cone
Female thread, 24 cone, O-ring, DKOL / DKOS
801.40
801.41
804.40
804.41
801.36
801.37
press.
[bar]
code
L
[mm]
d
[mm]
thread
size d1
press.
[bar]
code
L
[mm]
d
[mm]
thread
size d1
315
PS-801.36.006.00
28
M12x1,5
315
PS-801.40.006.00
21
M12x1,5
630
PS-801.37.006.00
28
M14x1,5
630
PS-801.41.006.00
21
M14x1,5
315
PS-801.36.008.00
30
M14x1,5
315
PS-801.40.008.00
21
M14x1,5
630
PS-801.37.008.00
30
M16x1,5
630
PS-801.41.008.00
21
M16x1,5
315
PS-801.40.010.00
21
10
M16x1,5
630
PS-801.41.010.00
21
10
M18x1.5
315
PS-804.40.006.00
21
M12x1,5
500
PS-804.41.006.00
21
M14x1,5
315
PS-804.40.008.00
21
M14x1,5
500
PS-804.41.008.00
21
M16x1,5
315
PS-804.40.010.00
21
10
M16x1,5
500
PS-804.41.010.00
21
10
M18x1.5
90 elbow, female thread, 24 cone, O-ring,

DKOL / DKOS
801.42
801.43
press.
[bar]
code
L
[mm]
d
[mm]
thread
size d1
315
PS-801.42.006.00
32
M12x1,5
630
PS-801.43.006.00
32
M14x1,5
315
PS-801.42.008.00
30
M14x1,5
630
PS-801.43.008.00
30
M16x1,5
315
PS-801.42.010.00
30
10
M16x1,5
630
PS-801.43.010.00
30
10
M18x1.5
Pressure gauge fitting
801.50
804.50
Pressure gauge fitting

press.
[bar]
630
801.50
press.
[bar]
code
L
[mm]
thread
size d1
630
PS-801.50.304.00
23
1/4-18 NPTF
500
code
L
[mm]
thread
size d1
PS-801.50.204.00
15
1/4 BSP
PS-801.50.208.00
17
1/2 BSP
PS-801.50.112.00
17
M20x1,5
PS-804.50.204.00
15
1/4 BSP
ORFS female thread
Test fitting with female thread
801.10.125
press.
[bar]
code
L
[mm]
thread
size d1
630
PS-801.10.125.00
22
S12,65x1,5
801.53
press.
[bar]
code
L
[mm]
thread
size d1
400
PS-801.53.506.00
18
11/16-16 UN
929

DKL female thread
JIC female thread
801.60
804.60
801.60
804.60
press.
[bar]
code
L
[mm]
thread
size d1
press.
[bar]
code
L
[mm]
thread
size d1
400
PS-801.60.202.00
14
1/8 BSP
450
PS-801.60.404.00
15
7/16-20 UNF
PS-801.60.204.00
18
1/4 BSP
420
PS-801.60.405.00
17
1/2-20 UNF
PS-801.60.141.00
18
M14x1,5
450
PS-804.60.404.00
15
7/16-20 UNF
PS-804.60.204.00
18
1/4 BSP
630
500
BSF female thread (JCB)

BANJO straight fitting
801.70
804.70
press.
[bar]
200
code
L
[mm]
B
[mm]
PS-801.70.008.00
19
8 mm
PS-801.70.010.00
21
10 mm
10
PS-801.70.202.00
21
1/8
10
PS-804.70.008.00
19
8 mm
PS-804.70.010.00
21
10 mm
10
PS-804.70.202.00
21
1/8
10
d1
801.10
press.
[bar]
code
L
[mm]
thread
size
420
PS-801.10.145.00
5/8 BSF
BSP male thread
801.80
BANJO (90 elbow) fitting
press.
[bar]
400
801.72
press.
[bar]
200
code
L
[mm]
PS-801.72.008.00
25
8 mm
PS-801.72.010.00
22
10 mm
10
PS-801.72.202.00
22
1/8
10
d1
L
[mm]
thread
size d1
PS-801.80.202.00
19
1/8 BSP
PS-801.80.204.00
24,5
1/4 BSP
NPTF male thread
B
[mm]
801.80
804.80
press.
[bar]
400
930
code
code
L
[mm]
thread
size d1
PS-801.80.302.00
21
1/8-27 NPTF
PS-804.80.302.00
21
1/8-27 NPTF
MEASURING SYSTEMS - pressure gauge

FM 631 / 632 / 633
FM 631
FM 632
Diameter:
Case:
Window:
Sensing element:
Connection:
Fill:
Working temp.:
Internal protection:
Operational position:
Versions:
63 mm
Stainless steel
Polycarbonate
Copper alloy Bourdon tube
Brass
Glycerol 86.5%
1.6
Vertical (+/-5%)
FM 631 - bottom connection
FM 632 - back connection
FM 633 - for panel mounting
FM 633
FM U-CLAMP
Characteristics: Standard pressure gauge intended for application in industry. A measuring range must be
chosen according to working pressure, so that:
- constant or slowly fluctuating pressure does not exceed 75% of measuring range,
- pulsating pressure does not exceed 60% of measuring range,
- dynamic pressure impulses do not exceed the maximum measuring range,
For appropriate choice of pressure gauges for gases above 25 bar and for welding gases
(oxygen, acetylene) please contact TUBES INTERNATIONAL Sales or Technical Department.
Because of the material used to make the measuring parts of pressure gauges, they must not
be used for application with viscous, caustic and crystallisable fluids.
code
FM-631-000
FM-631-001
FM-631-002
FM-631-004
FM-631-006
FM-631-010
FM-631-012
FM-631-016
FM-631-020
FM-631-025
FM-631-040
FM-631-060
FM-631-100
FM-631-160
FM-631-250
FM-631-315
FM-631-400
FM-631-600
FM-U-CLAMP
code
code
measuring range
[bar]
FM-632-000
FM-633-000
-1 0
FM-632-001
FM-633-001
01
FM-632-002
FM-633-002
0 2,5
FM-632-004
FM-633-004
04
FM-632-006
FM-633-006
06
FM-632-010
FM-633-010
0 10
FM-632-012
FM-633-012
0 12
FM-632-016
FM-633-016
0 16
FM-632-020
FM-633-020
0 20
FM-632-025
FM-633-025
0 25
FM-632-040
FM-633-040
0 40
FM-632-060
FM-633-060
0 60
FM-632-100
FM-633-100
0 100
FM-632-160
FM-633-160
0 160
FM-632-250
FM-633-250
0 250
FM-632-315
FM-633-315
0 315
FM-632-400
FM-633-400
0 400
FM-632-600
FM-633-600
0 600
clamp for panel mounting of pressure gauges FM 632 type
male thread
connection
[inch]
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
931
MEASURING SYSTEMS- measuring sets

TEMA 100
Measuring system designed to monitor static, dynamic pressure

as well as vacuum in hydraulic and pneumatic applications. The
measuring system consists of a basic set and such accessories
as: additional measuring nipples, hoses and adaptors that facilitate measurement in hardly accessible places. A self-venting
device guarantees accurate readings. A quick release coupling
designed to be connected with a measuring nipple has integrated
shut-off valves that ensure spill free connection and disconnection of the measuring system.
Maximum working pressure up to 600 bar.
code
type
TA-M-101
TA-M-105
TA-M-112
TA-M-113
TA-M-114
TA-M-106
TA-M-107
TA-M-108
TA-M-109
Set without pressure gauge

Set with 1 press. gauge (-1 15 bar)
Set with 1 press. gauge (0 25 bar)
Standard set designed to measure pressure in hydraulic systems

is supplied in a plastic case and consists of:
- measuring handle TA-M-101-2*,
- pressure gauge of your choice**,
- measuring nipple TA-M-120,
- measuring hose assembly TA-M-130 (L=2.5m),
- adaptor TA-M-135 (1/4 BSP female / 1/8 BSP male thread),
- adaptor TA-M-136 (1/8 BSP female / 1/4 BSP male thread).
There is empty space for two additional pressure gauges and
TA-M-139 adaptor in this plastic case.
* option - measuring handle TA-M-101-21A

** for a set with 2 pressure gauges, add their numbers to the code - e.g. TA-M-106-13 (a set with one pressure gauge 0100 bar and one
pressure gauge 040 bar.)
COMPONENTS AND ACCESSORIES OF TEMA 100 SYSTEM
picture
code
TA-M-101-2
TA-M-101-21A
TA-M-101-3
TA-M-120
Measuring handle that can be connected under low pressure. Equipped with pressure gauge port, quick release coupling with shut-off valve and self-venting device.
Measuring handle that can be connected under full working pressure. Equipped with
pressure gauge port, quick release coupling with shut-off valve, self-venting device
and valve.
Self-venting block with an alternative position of a venting screw.

Measuring nipple 1/8 BSP male thread, A type seal, galv. steel (PVC blank cap).
TA-M-120-126
Measuring nipple 1/8 BSP male thread, A type seal, galv. steel.
TA-M-120UNF
Measuring nipple 7/16 UNF male thread, galv. steel (PVC blank cap).
TA-M-121-125
Measuring nipple 1/4 BSP male thread, A type seal, galv. steel (PVC blank cap).
TA-M-121-126
TA-M-121R
TA-M-121R-126R
932
description
Measuring nipple 1/4 BSP male thread, A type seal, galv. steel.
Measuring nipple 1/4 BSP male thread, A type seal, AISI 316 steel (PVC blank cap).
Measuring nipple 1/4 BSP male thread, A type seal, AISI 316 steel
TA-M-122-125
Measuring nipple 1/4 BSP male thread, B type seal, galv. (PVC blank cap).
TA-M-122-126
Measuring nipple 1/4 BSP male thread, B type seal, galv. steel.
MEASURING SYSTEMS- measuring sets

COMPONENT PARTS AND ACCESSORIES OF TEMA SYSTEM 100
picture
code
description
TA-M-123-125
Measuring nipple M12x1,5 male thread, A type seal, galv. steel (PVC blank cap).
TA-M-123-126
Measuring nipple M12x1,5 male thread, A type seal, galv. steel.
TA-M-124-125
Measuring nipple M14x1,5 male thread, A type seal, galv. steel (PVC blank cap).
TA-M-124-126
Measuring nipple M14x1,5 male thread, A type seal, galv. steel.
TA-M-124UNF
Measuring nipple 9/16 UNF male thread, galv. steel (PVC blank cap).
TA-M-128-125
Measuring nipple M10x1 male thread, A type seal, galv. steel (PVC blank cap).
TA-M-128-126
Measuring nipple M10x1 male thread, A type seal, galv. steel.
TA-M-129R
TA-M-129R-126R
TA-M-125
Measuring nipple M10x1 male thread, B type seal, AISI 316 steel (PVC blank cap).
Measuring nipple M10x1 male thread, B type seal, AISI 316 steel
Blank cap of measuring nipple (PVC).
TA-M-126K
Blank cap of measuring nipple (galv. steel).
TA-M-126R
Blank cap of measuring nipple (AISI 316 steel).
TA-M-150
Socket of quick release coupling with 1/8 BSP male thread for measuring nipple.
TA-M-139
Changeover adaptor for TEMA 100 system with M16 x 2 metric male thread.
TA-M-150-137
TA-M-130
Socket of quick release coupling with 1/4 BSP male thread for measuring nipple.
Measuring hose assembly L = 2.5 m with TA-M-120 plug and TA-M-150 socket.
TA-M-160-1
Pipe connector for measuring nipple 6 mm x 1/8.
TA-M-161-1
TA-M-162-1
TA-M-163-1
TA-M-164-1
TA-M-165-1
TA-M-135
Adaptor 1/4 female thread / 1/8 male thread.
TA-M-136
Adaptor 1/8 female thread / 1/4 male thread.
TA-M-137
Adaptor 1/8 female thread / 1/4 female thread.
TA-M-140
90 elbow adaptor 1/8 female thread / 1/8 female thread.
TA-M-100-40
Rubber protection of pressure gauge 63 mm.
TA-M-101-1
Plastic case.
933
CLEANING AND WASHING

NiTO water guns
code
connection
description
NT-28002A8
3/4
female thread
General purpose, lightweight, economical water

gun with adjustable outlet nozzle, smooth flow
control. Made of brass with blue polyurethane
outside shield.
Working temp.: up to +60C.
code
connection
description
NT-53800A1
1/2 NiTO plug
NT-63820A1
3/4 NiTO plug
NT-53802A5
1/2
male thread
NT-59800A1
3/4
female thread
General purpose, lightweight water gun with adjustable outlet nozzle, smooth linear flow control
and trigger lock. Also available in blue, white,
red, yellow and green colour.
Weight: 0.295 kg.
Cover body: highly durable material.
Nozzle: chrome-plated brass.
Working press.: 6 bar at 40C, 4 bar at 60C.
Flow rate: 8.5 10.5 l/min (3 bar).
code
connection
NT-30550A3
3/4
female thread
NT-30525A3
1/2 NiTO plug
NT-30500A3
3/4 NiTO plug
NT-30520A3
1 NiTO plug
NT-30530A3
1/2 hose tail
NT-30510A3
3/4 hose tail
NiTO LIGHT DUTY
NiTO I
NiTO II
NiTO HEAVY DUTY
NiTO ERGO
934
NT-30210A0
code
connection
NT-30000A0
1/2
female thread
NT-30000A3
3/4 hose tail
NT-30030A3
1/2 NiTO plug
NT-30010A3
3/4 NiTO plug
code
connection
NT-40525A3
1/2 NiTO plug
NT-40500A3
3/4 NiTO plug
description
Industrial water gun with adjustable outlet nozzle, smooth linear flow control and trigger lock.
The cover body is impact resistant.
Casing: composite material.
Weight: 0.7 kg.
Flow rate: 20 60 l/min (5 bar) depending on the
assembled nozzle.
Flow rate with standard nozzle: 40 l/min.
Nozzle set 20, 30, 60 l/min.
description
Industrial water gun with adjustable outlet nozzle

and linear flow control.
Cover body: synthetic rubber.
Weight: 1.1 kg.
Flow rate: 25 42 l/min (5 bar).
description
General purpose, ergonomic design, lightweight
water gun with adjustable outlet nozzle, smooth
linear flow control and trigger with lock function.
Weight: 0.5 kg.
Cover body: composite material.
Nozzle: chrome-plated brass.
Flow rate: 50 l/min (5 bar).

NiTO CLEAN sets for foam cleaning and rinsing
NT-57105A8
NT-57140A1
NT-30800A3
NT-9350
Foam cleaning gives better results and is more effective and economical than traditional methods. A layer of foam is sprayed over
the surface to be cleaned using NiTO CLEAN device. The device
consists of NiTO gun in COMBI version, container for chemical
agent with injector and dosage nozzles. The correct dosage of
chemical agent is ensured by the use of precision nozzles of selected size (from 0.4% to 10% dosage of chemical agent). When
the cleaning action is completed, the foam is rinsed with water
using the gun with a suitable nozzle attached. The NiTO COMBI
guns can also be used without containers to wash surfaces using
several other types of nozzles.
code
NT-57105A8
NT-9352
NT-30800A3
NT-571140A1
17 cm lance, small nozzle (black).

17 cm lance, large nozzle (blue).
NT-9352
65 cm angular lance, small nozzle (black).
NT-9353
65 cm angular lance, large nozzle (blue)
NT-93065
NT-93015
NT-93139
NT-93149
NT-93105
NT-93115
Short adjustable nozzle.
NT-9351
NT-93005
NT-93005
NiTO l COMBI water gun with 1/2 plug

(max. working temp.: +40C, max. pressure: 6 bar).
NiTO ll COMBI with 3/4 female thread
(max. working temp.: +90C, max. pressure: 25 bar).
NT-9350
NT-93055
NT-93055
description
Foam set: NiTO l water gun + 17 cm lance + 1.4 l container

(max. working temp. +40C, max. pressure: 6 bar).
Foam set: NiTO l water gun + 17 cm lance + 2.5 l container
Foam set: NiTO ERGO water gun + 17 cm lance + 1.4 l container
Foam set: NiTO ERGO water gun + 17 cm lance + 2.5 l container
(max. working temp. +60C, max. pressure: 10 bar.
NT-9378
Set of 14 dosing nozzles (0.4% 10%).
NT-93139
Foam injector with NiTO ERGO handle and suction hose
NT-93149
Foam injector with suction hose
NT-93105
1.4 litre, white container (red, blue, yellow and green also available)
NT-93115
2.5 litre, white container (red, blue, yellow and green also available)
NT-93189
Blank plug for Nito CLEAN container
935

AKBO water guns
AK-RN001-B
AK-RN001-W
AK-RNP01-B
AK-RNP01-W
AK-RHP01-R
code
version
description
AK-RN001-B
blue
AK-RNP01-B
blue trigger
protection
AK-RN001-W
white
AK-RNP01-W
white trigger
protection
AK-RHP01-R
red
AK-RHP02-R-L40
red
lance 40 cm
HEAVY DUTY water gun of

AISI 316 steel.
HEAVY DUTY water gun of

AISI 316 steel, with PTFE-air
insulation.
Note!
- the guns are not designed for steam,
- special precautions must be taken when the gun is used
for hot water.
AK-RHP02-R-L40
Water jets
HANDFIGHTER
936
code
connection
material
NT-53750A3
1/2 NiTO plug
chrome-plated
brass
NT-63750A3
3/4 NiTO plug
chrome-plated
brass
NT-20300A9
3/4
female thread
nickel-plated
brass
NT-20000A4
15/20 mm
hose tail
brass
code
connection
IN-59481-020
(short)
3/4 male thread
IN-59481-120
(short)
19 mm hose tail
IN-59481-220
(long)
3/4 female thread
IN-59481-225
(long)
1 male thread
IN-59482-020
(short)
3/4 male thread
IN-59482-125
(short)
25 mm hose tail
IN-59482-220
(long)
3/4 female thread
IN-59482-225
(long)
1 male thread
description
Adjustable nozzle.
description
An industrial water jet with adjustable outlet nozzle. The application of a safety ring
made of EPDM rubber gives additional protection against mechanical damage.
Material: brass
Cover body: highly resistant orange plastic
Nozzle: 7 mm.
Working pressure: 16bar.
An industrial water jet with adjustable outlet
nozzle. The application of a safety ring of
EPDM rubber gives additional protection
against mechanical damage.
Material: brass
Cover body: highly resistant red material.
Nozzle: 10 mm.

EWO water and coolant guns for CNC machines
code
connection
description
EW-40404
13 mm hose tail
EW-40406
19 mm hose tail
EW-40430
1/2 female thread
MULTICLEAN water gun with adjustable flow control and trigger lock. Solid
brass construction. Particularly recommended for CNC machines, coolants
and cleaning.
Working temp.: from +5C up to +90C.
Weight: 1.05 kg.
EW-160K4
2 mm nozzle
EW-160K4a
4 mm nozzle
code
connection
EW-41204
13 mm hose tail
EW-41206
19 mm hose tail
EW-41230
1/2 female thread
EW-412K4
2 mm nozzle
EW-412K5
4 mm nozzle
Nozzle for MULTICLEAN gun.

2 mm nozzle as a standard.
description
PROFICLEAN water gun with adjustable flow control and trigger lock. Robust and lightweight aluminium construction. Particularly recommended
for CNC machines, coolants and
cleaning.
Working temp.: from +5C up to +90C.
Weight: 0.75 kg.
Nozzle for PROFICLEAN gun.
2 mm nozzle as a standard.
Pressure dependence of the flow rate, with a fully open valve

nozzle size
pressure [bar]
4
10
16
25
40
2 mm
4 l/min
5 l/min
6,3 l/min
8 l/min
10 l/min
13 l/min
4 mm
16 l/min
20 l/min
25 l/min
32 l/min
40 l/min
50 l/min
EWO gun for chassis cleaning

code
connection
EW-355511
quick release
coupling plug
EW-355521
quick release
coupling plug
EW-355531
quick release
coupling plug
description
Water gun designed for chassis
cleaning.
Container:
- EW-355511 - plastic 0.7 l.
- EW-355521 - metal 0.7 l.
- EW-355531 - none
Max. pressure: 10 bar.
Working temp.: 0C up to +90C.
937

EWO gun for sand blasting
code
connection
EW-39012
quick release
coupling plug
description
Gun designed to remove rust and

dirt from places inaccessible for e.g.
grinders, using mineral abrasive material. Grain diameter range 0.1 0.8
mm depending on the surface that is
sand blasted.
Nozzle diameter: 4 mm.
Max. pressure.: 10 bar.
Working temp.: 0C up to +50C.
EW-39013
quick release
coupling plug
EW-39012 - gun with 0.7 l plastic

container.
EW-39013 - gun with 1.5 m suction
hose.
code
connection
description
EW-125241
quick release
coupling plug
EWO gun for waxing
Aluminium gun with 3 mm nozzle

with adjustable flow control. Uses
vacuum pressure to suck the fluid of
low viscosity from the container.
EW-125341
quick release
coupling plug
Container: plastic, volume 0.7 l.

Nozzle diameter: 3 mm.
Working temp.: +5C up to +50C.
EW-125341 - gun with 360 rotating
nozzle.
EW-1253363 - gun with fitting for
suction hose.
EW-1253363
938
quick release
coupling plug

High pressure MTM water guns
code
connection
MH-100060
3/8 male
MH-100007
3/8 female
MH-100067
1/4 female
MH-100071
M22x1.5 male
MH-100077
3/8 female (swivel)
MH-100080
M22x1.5 male (swivel)
code
connection
MH-100085
3/8 male
MH-100011
3/8 female
MH-100089
1/4 female
MH-100091
M22x1.5 male
MH-100096
3/8 female (swivel)
MH-100097
code
connection
MH-100184
3/8 male
MH-100026
3/8 female
MH-100186*
3/8 female
MH-100187
1/4 female
MH-100189
M22x1.5 male
MH-100190
3/8 female (swivel)
MH-100191*
3/8 female (swivel)
code
connection
MH-100192
3/8 male
MH-100027
3/8 female
MH-100194*
3/8 female
MH-100241
1/4 female
MH-100196
M22x1.5 male
MH-100197
3/8 female (swivel)
MH-100198*
3/8 female (swivel)
code
connection
MH-100176
3/8 female
MH-100276
1/4 female
MH-100237
M22x1.5 male
MH-100277
3/8 female (swivel)
MH-100177
description
ASTRA water gun with 1/4 BSP

female thread outlet.
Working press.: up to 350 bar
description
IRIDE water gun with 1/4 BSP female thread outlet.

description
ASTRA water gun with non-freezing

1/4 BSP female thread outlet.
Max. leak 1.8 l/min at 3 bar pressure.
( * 0.6 l/min version).
description
IRIDE water gun with non-freezing

Max. leak 1.8 l/min at 3 bar pressure.
( * 0,6 l/min version).
description
IRIDE water gun with MT6 lance and

939

High pressure MTM water guns
code
connection
description
MH-100009
3/8 female
MH-100074
3/8 male
MH-100250
1/4 female
MH-100076
M22x1.5 male
MH-100082
3/8 female (swivel)
MH-100084
code
connection
MH-100014
3/8 female
MH-100093
3/8 male
MH-100251
1/4 female
MH-100095
M22x1.5 male
MH-100015
3/8 female (swivel)
MH-100099
ASTRA water gun with a quick release coupling socket, KW type.

description
IRIDE water gun with a quick release

coupling socket, KW type.
Assembly of high pressure water gun accessories

5
6
4
1.
2.
3.
4.
5.
6.
7.
8.
Water gun,
Adaptors: 1, 2, 3-piece,
Hoses supplied as complete hose assemblies with fittings and protectors,
Sewer cleaning hose assemblies,
Insulated and non-insulated lances,
Heads, protectors and adaptors,
Nozzles for high pressure cleaning equipment,
Sewer cleaning nozzles.
940

Accessories for high pressure water guns
code
MH-140067
MH-140084
MH-140068
MH-140085
description
MT4 lance, 345 mm
with HYPERJET head
Chassis cleaning lance,
1000 mm
connection
inlet / outlet
material
M22x1.5 male
1/4 NPT female
M22x1.5 male
1/8 NPT female
1/4 BSP male
1/4 NPT female
M22x1.5 male
1/4 NPT female
MH-140154
MT2 lance 395 mm
stainless steel
MH-140155
MT2 lance 395 mm
galv. steel
MH-140157
MT3 lance 290 mm
MH-140158
MT3 lance 290 mm
MH-140152
MT5 lance 280 mm
stainless steel
MH-140153
MT5 lance 280 mm
galv. steel
MH-120173
MT2 lance 700 mm
MH-120176
MT2 lance 900 mm
MH-120183
MT2 lance 1200 mm
MH-120188
MT2 lance 1500 mm
MH-120191
MT2 lance 1700 mm
MH-120195
MT2 lance 2000 mm
MH-120225
MT2 lance 700 mm
MH-120227
MT2 lance 900 mm
MH-120237
MT2 lance 1200 mm
MH-120240
MT2 lance 1500 mm
MH-120243
MT2 lance 1700 mm
MH-120247
MT2 lance 2000 mm
MH-120008
MT2 lance 700 mm
MH-120010
MT2 lance 900 mm
MH-120012
MT2 lance 1200 mm
MH-120014
MT2 lance 1500 mm
MH-120192
MT2 lance 1700 mm
MH-120016
MT2 lance 2000 mm
MH-120023
MT2 lance 700 mm
MH-120025
MT2 lance 900 mm
MH-120027
MT2 lance 1200 mm
MH-120029
MT2 lance 1500 mm
MH-120244
MT2 lance 1700 mm
MH-120031
MT2 lance 2000 mm
MH-140010
MT1 lance 250 mm
MH-140012
MT1 lance 500 mm
MH-140014
MT1 lance 700 mm
MH-140016
MT1 lance 900 mm
MH-140018
MT1 lance 1200 mm
MH-140011
MT1 lance 250 mm
MH-140013
MT1 lance 500 mm
MH-140015
MT1 lance 700 mm
MH-140017
MT1 lance 900 mm
MH-140019
MT1 lance 1200 mm
1/4 BSP male

1/4 BSP male
pic.
stainless steel
galv. steel
3
4
5
galv. steel
1/4 BSP male

1/4 NPT female
stainless steel
galv. steel
coupling
1/4 NPT female
stainless steel
stainless steel
M22x1.5 male
1/4 NPT female
galv. steel
941

code
MH-140133
MT1 lance 250 mm
MH-140134
MT1 lance 500 mm
MH-140136
MT1 lance 700 mm
MH-140138
MT1 lance 900 mm
MH-140140
MT1 lance 1200 mm
MH-140141
MT1 lance 250 mm
MH-140142
MT1 lance 500 mm
MH-140145
MT1 lance 700 mm
MH-140146
MT1 lance 900 mm
MH-140147
MT1 lance 1200 mm
MH-140020
MT6 lance 500 mm
MH-140022
MT6 lance 700 mm
MH-140024
MT6 lance 900 mm
MH-140026
MT6 lance 1200 mm
MH-140021
MT6 lance 500 mm
MH-140023
MT6 lance 700 mm
MH-140025
MT6 lance 900 mm
MH-140027
MH-140225
MT6 lance 1200 mm

Lance 500 mm with
HYPERJET-PLUS head
Lance 700 mm with
HYPERJET-PLUS head
Lance 900 mm with
HYPERJET-PLUS head
Lance 1200 mm with
HYPERJET-PLUS head
Lance 500 mm with
HYPERJET-PLUS head
Lance 700 mm with
HYPERJET-PLUS head
Lance 900 mm with
HYPERJET-PLUS head
Lance 1200 mm with
HYPERJET-PLUS head
Lance 500 mm with DUALJET head
MH-140227
MH-140229
MH-140231
MH-140226
MH-140228
MH-140230
MH-140232
MH-140117
MH-140120
MH-140244
MH-140246
MH-140118
MH-140243
MH-140245
MH-140247
942
description
MH-140034
Double, straight lance 1/8, 600 mm
MH-140038
MH-140035
MH-140039
MH-140036
Double lance 1/8, 600 mm
MH-140040
MH-140037
MH-140041
connection
inlet / outlet
material
pic.
stainless
steel
1/4 BSP male
1/4 NPT female
galv. steel
stainless
steel
M22x1.5 male
1/4 NPT female
2
galv. steel
stainless
steel
M22x1.5 male
1/4 NPT female
galv. steel
stainless
steel
M22x1.5 male
4
galv. steel
M22x1.5 male
1/4 NPT female
M22x1.5 male
1/4 NPT female
stainless
steel
galv. steel
stainless
steel
galv. steel

code
RM-200085220
RM-200085270
connection
inlet / outlet
M22x1.5 male
1/4 NPT female
length
[mm]
600
material
galv. steel
600
st. steel
RM-200085710
850
galv. steel
RM-200085700
1000
galv. steel
1500
galv. steel
RM-200085750
RM-200085810
1/4 BSP female

1/4 NPT female
850
st. steel
RM-200085800
1000
st. steel
RM-200085850
1500
st. steel
code
calibration
connection
RM-200357530
RM-200357535
RM-200357540
RM-200357545
RM-200357550
RM-200357555
RM-200357560
RM-200357565
RM-200357570
RM-200357580
RM-200357510
03
035
04
045
05
055
06
065
07
08
10
1/4 BSP female
connection
code
calibration
RM-200458635
RM-200458640
RM-200458645
RM-200458650
RM-200458655
RM-200458660
RM-200458665
RM-200458670
RM-200458680
RM-200458690
RM-200458610
035
04
045
05
055
06
065
07
08
09
10
1/4 BSP female
code
calibration
connection
RM-6581030
03
RM-6581035
035
RM-6581040
04
RM-6581045
045
RM-6581050
05
RM-6581055
055
RM-6581060
06
1/4 BSP female
description
ST-85 adjustable
lance.
Bending angle: from
20 to 140
Work. press.: 210 bar.
Work. temp.: +150C.
description
Rotary head for MT1, MT2, MT6

lances.
Working press.: 100 250 bar.
Working temp.: +100C.
description
Rotary head for MT1, MT2, MT6

lances.
Working press.: 200 400 bar.
description
Adjustable head for MT1, MT2,

MT6 lances.
943

Lance nozzle
Material: Stainless steel

Thread: 1/4 NPT male
code
calibration
MH-170289
MH-170291
MH-170293
MH-170294
MH-170295
MH-170296
MH-170297
MH-170299
MH-170301
MH-170308
MH-170310
MH-170311
MH-170312
MH-170313
MH-170314
MH-170315
MH-170317
MH-170318
MH-170319
MH-170321
-
03
04
05
055
06
065
07
08
10
03
04
045
05
055
06
065
07
075
08
10
-
flow rate / pressure

[l/min / bar]
11/210
11/140, 13/210
11/100, 13/140
11/80
13/100, 15/140
13/80, 21/210
15/100
21/140
21/80-100
11/210
11/140, 13/210
15/210
11/100, 13/140
11/80
13/100, 15/140
13/80, 21/210
15/100
15/80
21/140
21/80-100
-
flow
angle
15
code
calibration
MH-170334
MH-170336
MH-170337
MH-170338
MH-170339
MH-170340
MH-170341
MH-170342
MH-170344
MH-170346
MH-170352
MH-170354
MH-170355
MH-170356
MH-170357
MH-170358
MH-170359
MH-170360
MH-170361
MH-170362
MH-170364
03
04
045
05
055
06
065
07
08
10
03
04
045
05
055
06
065
07
075
08
10

[l/min / bar]
11/210
11/140, 13/210
15/210
11/100, 13/140
11/80
13/100, 15/140
13/80, 21/210
15/100
21/140
21/80-100
11/210
11/140, 13/210
15/210
11/100, 13/140
11/80
13/100, 15/140
13/80, 21/210
15/100
15/80
21/140
21/80-100
flow
angle
25
40
HYDROJET lance nozzle

Thread: 1/4 NPT male
code
calibration
MH-170216
MH-170224
MH-170228
MH-170232
MH-170236
MH-170240
MH-170244
MH-170602
MH-170606
MH-170610
MH-170626
MH-170217
MH-170225
MH-170229
MH-170233
MH-170237
MH-170241
MH-170245
MH-170603
MH-170607
MH-170611
MH-170627
03
04
045
05
055
06
065
07
075
08
10
03
04
045
05
055
06
065
07
075
08
10
944

[l/min / bar]
11/210
11/140, 13/210
15/210
11/100, 13/140
11/80
13/100, 15/140
13/80, 21/210
15/100
15/80
21/140
21/80-100
11/210
11/140, 13/210
15/210
11/100, 13/140
11/80
13/100, 15/140
13/80, 21/210
15/100
15/80
21/140
21/80-100
flow
angle
15
code
calibration
MH-170218
MH-170226
MH-170230
MH-170234
MH-170238
MH-170242
MH-170246
MH-170604
MH-170608
MH-170612
MH-170628
MH-170219
MH-170227
MH-170231
MH-170235
MH-170239
MH-170243
MH-170247
MH-170605
MH-170609
MH-170613
MH-170629
03
04
045
05
055
06
065
07
075
08
10
03
04
045
05
055
06
065
07
075
08
10

[l/min / bar]
11/210
11/140, 13/210
15/210
11/100, 13/140
11/80
13/100, 15/140
13/80, 21/210
15/100
15/80
21/140
21/80-100
11/210
11/140, 13/210
15/210
11/100, 13/140
11/80
13/100, 15/140
13/80, 21/210
15/100
15/80
21/140
21/80-100
flow
angle
25
40

KARCHER lance nozzle
KARCHER lance nozzle
code
calibration
MH-170894
MH-170895
MH-170896
MH-170897
MH-170898
MH-170899
MH-170900
MH-170901
MH-170903
MH-170910
MH-170911
MH-170912
MH-170913
MH-170914
MH-170915
MH-170916
MH-170917
MH-170918
MH-170919
MH-170922
-
03
04
05
055
06
065
07
08
10
03
04
045
05
055
06
065
07
075
08
10
-

[l/min / bar]
11/210
11/140, 13/210
11/100, 13/140
11/80
13/100, 15/140
13/80, 21/210
15/100
21/140
21/80-100
11/210
11/140, 13/210
15/210
11/100, 13/140
11/80
13/100, 15/140
13/80, 21/210
15/100
15/80
21/140
21/80-100
-
flow
angle
15
code
code
calibration
MH-170930
MH-170931
MH-170932
MH-170933
MH-170934
MH-170935
MH-170936
MH-170937
MH-170938
MH-170941
MH-170949
MH-170950
MH-170951
MH-170952
MH-170953
MH-170954
MH-170955
MH-170956
MH-170957
MH-170958
MH-170961
03
04
045
05
055
06
065
07
08
10
03
04
045
05
055
06
065
07
075
08
10
thread

[l/min / bar]
11/210
11/140, 13/210
15/210
11/100, 13/140
11/80
13/100, 15/140
13/80, 21/210
15/100
21/140
21/80-100
11/210
11/140, 13/210
15/210
11/100, 13/140
11/80
13/100, 15/140
13/80, 21/210
15/100
15/80
21/140
21/80-100
description
flow
angle
25
40
pic.
M18x1.5 female
Housing adaptor
MH-350228
1/4 BSP female

M18x1.5 male
Lance adaptor
MH-390181
O-ring sealing
MH-240039
LS 3 foam injector / generator

code
connection
description
RM-540500
1/4 BSP male
RM-540505
M22x1.5 female
RM-540502
M22x1.5 male
1 l container and foam injector with

adjustable flow rate and spray angle.
Max. flow rate: 20 l/min.
945

code
1/4 BSP male
Socket for 350 bar lance
1/4 BSP female
Plug for 350 bar lance
MH-240252
3/8 BSP female
Plug 400 bar
MH-240253
3/8 BSP female
Socket 400 bar
MH-240254
3/8 BSP female
Plug 250 bar
MH-240255
3/8 BSP female
Socket 250 bar
code
outlet
MH-160062
1/4 NPT female
MH-160139
1/8 NPT female
MH-160061
1/4 NPT female
MH-160137
1/8 NPT female
code
outlet
MH-220278
1/4 NPT female
MH-220130*
1/4 NPT female
MH-220134
MH-220135*
3
4
5
6
7
946
pic.
MH-240025
MH-220133*
description
MH-240221
MH-220132
outlet
description
pic.
HYPERJET head.
Inlet: 1/4 BSP female thread.
HYPERJET PLUS head.

description
1/8 NPT female + 3/8 male Nozzle protector.

1/8 NPT female + 3/8 male Colour: black (blue version *).
1/8 NPT female
1/8 NPT female
code
connection
MH-240019
MH-240020
MH-240021
MH-350001
MH-240026
MH-240027
MH-240028
MH-240029
MH-240030
MH-240031
MH-240033
MH-240034
MH-240032
MH-240024
MH-240035
MH-240036
MH-240037
MH-240038
MH-240023
MH-350001
M22x1.5 male / 1/2 BSP male

M22x1.5 male / 3/8 BSP fem.
M22x1.5 fem. / 1/2 BSP male
M22x1.5 fem. / 3/8 BSP fem.
M22x1.5 fem. / M22x1.5 fem.
M22x1.5 male / M22x1.5 male
M22x1.5 fem. / M22x1.5 male
M22x1.5 male / 1/4 BSP fem.
description
pic.
Adaptor.
3-piece adaptor.
2-piece adaptor (2 x O-ring)
3
4
5
6
7
3-piece, long adaptor.
Long adaptor.
2-piece adaptor.
Adaptor.

Hoses for high pressure cleaning equipment
RM-RED
Internal layer:
Reinforcement:
External layer:
Working temp.:

Red pinpricked synthetic rubber
Characteristics: Hose designed for hot water pressure cleaning equipment. Supplied as a complete hose assembly with fittings and protectors. Different types of fittings and lengths are also available
- contact TUBES INTERNATIONAL Technical Department.
code
RM-344100710
RM-344100715
RM-344100720
RM-344101710*
RM-344101715*
RM-344101720*
I.D.
[mm]
thread
size
(inlet)
O.D.
[mm]
15
M22x1.5
female
thread
size
(outlet)
M22x1.5
female
working
pressure
[bar]
length
[m]
315
10
15
20
10
15
20
* - equipped with one swivel fitting that prevents hose kinking.
YELLOW 2 SC
Internal layer:
Reinforcement:
External layer:
Working temp.:

Yellow synthetic rubber
Characteristics: Hose designed for hot water pressure cleaning equipment. External layer resistant to abrasion,
oil, animal fats and bird droppings. Not suitable for industrial cleaning applications. Wire layers resistant to corrosion. Supplied as a complete hose assembly with fittings and protectors.
Different types of fittings and lengths are available - contact Technical Department of TUBES
INTERNATIONAL.
code
RM-3491004109
RM-3491004159
RM-3491004209
RM-349100410
RM-349100415
RM-349100420
I.D.
[mm]
O.D.
[mm]
15,6
thread
size
(inlet)
M22x1.5
female
thread
size
(outlet)
M22x1.5
female
working
pressure
[bar]
fittings
material
stainless
steel
400
galvanized
steel
length
[m]
10
15
20
10
15
20
947

AQUAWASH 1SN
Internal layer:
Reinforcement:
External layer:
Working temp.:

Black or blue synthetic rubber
Characteristics: Hose designed for hot and cold water high pressure cleaning equipment. Resistant to abrasion,
ozone and detergents. Not suitable for steam cleaning.
Standards:
EN 1829-2:2008, EN 853 1SN - dimensional compatibility.
Assembly:
Contact TUBES INTERNATIONAL Technical Department.
code
I.D.
[mm]
O.D.
[mm]
HW-AQUA1SN-06BK
HW-AQUA1SN-08BK
HW-AQUA1SN-10BK
HW-AQUA1SN-12BK
6,4
7,9
9,5
12,7
13,2
15
17,3
20,6
Code example:
- black hose:
- blue hose:
working
pressure
[bar]
250
250
250
210
bursting
pressure
[bar]
900
850
825
770
bending
radius
[mm]
100
115
130
180
weight
[kg/m]
0,23
0,28
0,36
0,42
HW-AQUA1SN-06BK
HW-AQUA1SN-06BL
AQUAWASH 2SN
Internal layer:
Reinforcement:
External layer:
Working temp.:

Black or blue synthetic rubber
Characteristics: Hose designed for hot and cold water high pressure cleaning equipment. Resistant to abrasion,
ozone and detergents. Not suitable for steam cleaning.
Standards:
EN 1829-2:2008, EN 853 2SN - dimensional compatibility.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-AQUA2SN-06BK
HW-AQUA2SN-08BK
HW-AQUA2SN-10BK
HW-AQUA2SN-12BK
6,4
7,9
9,5
12,7
14,9
16,7
19,1
22,1
Code example:
- black hose:
- blue hose:
948
HW-AQUA2SN-06BK
HW-AQUA2SN-06BL
working
pressure
[bar]
400
400
400
400
bursting
pressure
[bar]
1600
1400
1300
1200
bending
radius
[mm]
100
115
130
180
weight
[kg/m]
0,40
0,46
0,55
0,64

HYDROWASH / 1
Internal layer: Black synthetic rubber

External layer: Black or blue synthetic
rubber (pinpricked)
Characteristics: Hose designed for hot water pressure cleaning equipment. Internal layer resistant to detergents,
external layer to abrasion, oil, ozone and weather conditions.
Assembly:
Use Z type fittings (non-skived).
code
I.D.
[mm]
O.D.
[mm]
HW-HWASH1T-06
HW-HWASH1T-08
HW-HWASH1T-10
HW-HWASH1T-12
6,4
8
9,5
12,7
13,2
14,8
17,2
20,4
Code example:
- black hose:
- blue hose:
working
pressure
[bar]
250
250
250
250
bursting
pressure
[bar]
1000
1000
1000
1000
bending
radius
[mm]
100
115
130
180
weight
[kg/m]
0,22
0,26
0,34
0,41
HW-HWASH1T-06BK
HW-HWASH1T-06BL
HYDROWASH / 2
Internal layer: Black synthetic rubber

Reinforcement: Two steel wire braids
External layer: Black or blue synthetic
rubber (pinpricked)
Characteristics: Hose designed for hot water pressure cleaning equipment. Internal layer resistant to detergents,
external layer to abrasion, oil, ozone and weather conditions.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
HW-HWASH2T-06
HW-HWASH2T-08
HW-HWASH2T-10
HW-HWASH2T-12
6,4
8
9,5
12,7
15
16,5
18,9
22,2
Code example:
- black hose:
- blue hose:
working
pressure
[bar]
400
400
400
400
bursting
pressure
[bar]
1600
1600
1600
1600
bending
radius
[mm]
100
115
130
180
weight
[kg/m]
0,38
0,44
0,55
0,64
HW-HWASH2T-06BK
HW-HWASH2T-06BL
949

GAUNTLET 1500
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black NBR rubber

One textile braid
Yellow Carbryn / NBR compound
oil, animal fat and poultry fat. High flexibility of the hose facilitates operation.
code
I.D.
[mm]
O.D.
[mm]
GY-GAUNTLET/1500-06
GY-GAUNTLET/1500-10
GY-GAUNTLET/1500-13
GY-GAUNTLET/1500-19
6,4
9,5
12,7
19,1
15
19,1
21,3
31,8
working
pressure
[bar]
103
103
83
103
bursting
pressure
[bar]
410
410
330
410
bending
radius
[mm]
65
95
125
190
weight
[kg/m]
0,16
0,27
0,29
0,61
GAUNTLET 3000
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black NBR rubber

code
I.D.
[mm]
O.D.
[mm]
GY-GAUNTLET/3000-10
GY-GAUNTLET/3000-13
9,5
12,7
17,5
20,8
working
pressure
[bar]
206
206
bursting
pressure
[bar]
824
824
bending
radius
[mm]
100
120
weight
[kg/m]
0,36
0,48
GAUNTLET 4500
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black NBR rubber

code
I.D.
[mm]
O.D.
[mm]
GY-GAUNTLET/4500-10
GY-GAUNTLET/4500-13
9,5
12,7
17,5
20,8
950
working
pressure
[bar]
310
310
bursting
pressure
[bar]
1240
1240
bending
radius
[mm]
-
weight
[kg/m]
0,40
0,51

Fittings for high pressure cleaning hoses
Fitting for cleaning equipment
ZKW110
code
(carbon steel)
code
(stainless steel)
TI-ZKW110-22-04
TI-ZKW110-22-05
TI-ZKW110-22-06
-
TI-ZKW110-22-04SS
TI-ZKW110-22-05SS
TI-ZKW110-22-06SS
TI-ZKW110-22-08SS
thread
size
[mm]
M22x1.5
M22x1.5
M22x1.5
M22x1.5
hose
I.D.
[inch]
1/4
5/16
3/8
1/2
Fitting for cleaning equipment (long nut)
ZKW210
code
(carbon steel)
TI-ZKW210-22-05
TI-ZKW211-22-05*
thread
size
[mm]
M22x1.5
M22x1.5
* - fitting with long nut.
Fitting for cleaning equipment (brass nut)
ZKW111
code
(carbon steel)
code
(stainless steel)
TI-ZKW111-22-04
TI-ZKW111-22-05
TI-ZKW111-22-06
TI-ZKW111-22-04SS
TI-ZKW111-22-05SS
TI-ZKW111-22-06SS
thread
size
[mm]
M22x1.5
M22x1.5
M22x1.5
hose
I.D.
[inch]
1/4
5/16
3/8
Fitting for cleaning equipment (for water gun)
ZKW150
code
(carbon steel)
TI-ZKW150-22-04
TI-ZKW150-22-05
TI-ZKW150-22-06
thread
size
[mm]
M22x1.5
M22x1.5
M22x1.5
code
TI-ZKR110-10-04
TI-ZKR110-10-05
TI-ZKR110-10-06
hose
I.D.
[inch]
1/4
5/16
3/8
hose
I.D.
[inch]
1/4
5/16
3/8
Bearing fitting for cleaning equipment (for water

gun)
ZKR110
pipe
diameter
[mm]
10
10
10
hose
I.D.
[inch]
5/16
5/16
ZKR180
code
(carbon steel)
code
(stainless steel)
TI-ZKR180-11-04
TI-ZKR180-11-05
TI-ZKR180-10-04SS
TI-ZKR180-10-05SS
TI-ZKR180-11-04SS
TI-ZKR180-11-05SS
pipe
diameter
[mm]
10
10
11
11
hose
I.D.
[inch]
1/4
5/16
1/4
5/16
951

Fittings for high pressure cleaning hoses
Nut for cleaning equipment
ZKW160
code
(carbon steel)
code
(stainless steel)
TI-ZKW160-22-04
TI-ZKW160-22-05
TI-ZKW160-22-06
TI-ZKW160-22-04SS
TI-ZKW160-22-05SS
TI-ZKW160-22-06SS
thread
size
[mm]
M22x1.5
M22x1.5
M22x1.5
hose
I.D.
[inch]
1/4
5/16
3/8
ZKW16...
code
(carbon steel)
code
(stainless steel)
TI-ZKW161-22
TI-ZKW162-22
TI-ZKW163-22
TI-ZKW164-22
TI-ZKW161-22SS
TI-ZKW162-22SS
TI-ZKW163-22SS
TI-ZKW164-22SS
thread
size
[mm]
M22x1.5
M22x1.5
M22x1.5
M22x1.5
color
black
yellow
blue
red
Protectors of hose fittings for cleaning equipment

GK
type
colour
DN 6 (D1/D2)
code
blue
gray
GK
orange
red
black
yellow
952
KK
black
SK
EK
EK
SK
KK
14,6/14,6
EM-GKG-06
14,6/14,6
EM-GKO-06
14,6/14,6
EM-GKR-06
14,6/14,6
EM-GKY-06
14,5/15
EM-KKS-06
14/13
EM-SK-06
17
EM-EKS-68
DN 8 (D1/D2)
code
DN 10 (D1/D2)
code
DN 12 (D1/D2)
code
17/17
EM-GKB-08
17/17
EM-GKG-08
17/17
EM-GKO-08
17/17
EM-GKR-08
17/17
EM-GKS-08
17/17
EM-GKY-08
19,5/19,5
EM-GKB-10
19,5/19,5
EM-GKG-10
19,5/19,5
EM-GKO-10
19,5/19,5
EM-GKR-10
19,5/19,5
EM-GKS-10
19,5/19,5
EM-GKY-10
23/22,5
EM-GKB-12
23/22,5
EM-GKG-12
23/22,5
EM-GKO-12
23/22,5
EM-GKR-12
23/22,5
EM-GKS-12
23/22,5
EM-GKY-12
17
EM-EKS-68

Sewage cleaning hoses
IK 25
Internal layer: Black smooth NBR rubber

Reinforcement: Two textile braids
External layer: Black smooth NR/BR compound
highly resistant to abrasion
Characteristics: Hose designed for pressure cleaning of sewage systems. Highly resistant to abrasion (according
to DIN 53516:1987 - 40 mm3 standard).
Supplied as a complete hose assembly with male or female BSP 60 thread fittings (e.g. code
no. of the hose assembly IK 25, 1/2, 40 meter long - SP-IK25-68468136-040). Standard
length: 40, 60, 80, 100, 120, 160, 180 m. Each hose assembly is pressure tested and delivered
with a quality control certificate.
Other fittings and lengths are available - contact TUBES INTERNATIONAL Technical Department.
code
I.D.
[mm]
O.D.
[mm]
SP-IK25-68468136-L
SP-IK25-68468196-L
SP-IK25-68468257-L
SP-IK25-68468328-L
13
19
25
32
25
31
39
48
thread
size
[inch]
1/2
3/4
1
1.1/4
working
pressure
[bar]
250
250
250
250
bursting
pressure
[bar]
625
625
625
625
bending
radius
[mm]
70
95
110
150
weight
[kg/m]
0,46
0,61
0,86
1,27
CANAL 200
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black SBR rubber

Two textile braids
Black SBR rubber
Characteristics: Hose designed for pressure cleaning of sewage systems.

Assembly:
code
I.D.
[mm]
O.D.
[mm]
PR-CANAL/200-19
PR-CANAL/200-25
19
25
32
39
working
pressure
[bar]
200
200
bursting
pressure
[bar]
450
450
bending
radius
[mm]
100
150
weight
[kg/m]
0,65
0,85
953

KUKA 250
Internal layer:
Reinforcement:
External layer:
Working temp.:

Two textile braids
Characteristics: Delivery hose (mandrel built) designed for high pressure cleaning and flushing of sewage
systems. External layer resistant to abrasion and weather conditions. Manufactured according
to EN ISO 6945 standard.
code
I.D.
[mm]
O.D.
[mm]
SL-KUKA250-13
SL-KUKA250-16
SL-KUKA250-19
SL-KUKA250-25
SL-KUKA250-32
13
16
19
25
32
25,1
28,1
31,6
39,3
48
bending
radius
[mm]
65
80
90
105
140
working
pressure
[bar]
250
250
250
250
250
bursting
pressure
[bar]
625
625
625
625
625
weight
[kg/m]
0,45
0,50
0,60
0,83
1,18
standard
length
[m]
120
120
120
120
120
KUKA 250 hose fittings

picture
Fitting with BSP male thread
Fitting with BSP female thread
954
code
thread size
[inch]
hose I.D.
[mm]
spanner size
[mm]
SL-KUKA250-13/BZ110-08
1/2
13
27
SL-KUKA250-16/BZ110-10
5/8
16
27
SL-KUKA250-19/BZ110-12
3/4
19
32
SL-KUKA250-25/BZ110-16
25
41
SL-KUKA250-32/BZ110-20
1.1/4
32
50
SL-KUKA250-13/BW110-08
1/2
13
27
SL-KUKA250-16/BW110-08
1/2
16
27
SL-KUKA250-16/BW110-10
5/8
16
30
SL-KUKA250-16/BW110-12
3/4
16
32
SL-KUKA250-19/BW110-12
3/4
19
32
SL-KUKA250-25/BW110-16
25
41
SL-KUKA250-32/BW110-20
1.1/4
32
50

JC 7 / JC 8
Internal layer: Thermoplastic polyester

Reinforcement: Two polyester braid
pinpricked
- JC 7 orange
- JC 8 blue
Characteristics: Hose designed for water pressure cleaning of sewage system.
Assembly:
code
I.D.
[mm]
O.D.
[mm]
ZC-JC7-13
ZC-JC7-16
ZC-JC7-19 / ZC-JC8-19
ZC-JC7-25 / ZC-JC8-25
ZC-JC7-32 / ZC-JC8-32
13
16
19,2
25,6
32
22,4
26,5
29,5
36,8
45,5
working
pressure
[bar]
280
220
200/250
200/250
200/250
bursting
pressure
[bar]
700
550
500/625
500/625
500/625
bending
radius
[mm]
75
100
120
150
235
weight
[kg/100 m]
29,50
40,20
45,40
63,50
91,50
ECOLOGY 210HD / 250HD
Internal layer: Polyethylene

Reinforcement: One or two synthetic fibre braids
+ one braid for cover integration
External layer: Polyurethane
- E210HD - blue
- E250HD - red
Characteristics: Hose designed for high pressure cleaning of sewage system. Suitable for water-based fluids
used for cleaning, scrubbing, etc. Resistant to abrasion and microorganisms, flexible in a full
range of working temperatures. Suitable for high humidity working conditions. The external layer
is resistant to acids, bases, oil and grease. Not designed to transfer hydraulic fluids and solvents.
Assembly:
Supplied as a complete hose assembly with specified length L with male or female BSP
60 thread fittings (e.g. code no. of the assembly hose E250HN 1/2, 40 meter long - TOE250HD-12-040). Standard length: 40, 60, 80, 100, 120, 150, 180, 200, 240, 300 m.
Other fittings are available - contact TUBES INTERNATIONAL Technical Department.
31,5
38,7
46,7
thread
size
[inch]
3/4
1
1.1/4
working
pressure
[bar]
210
210
210
bursting
pressure
[bar]
525
525
525
bending
radius
[mm]
120
155
240
22,8
30,3
37,9
45,3
1/2
3/4
1
1.1/4
250
250
250
250
625
625
625
625
75
120
155
240
code
I.D.
[inch]
O.D.
[mm]
TO-E210HD-20-L
TO-E210HD-25-L
TO-E210HD-32-L
3/4
1
1.1/4
TO-E250HD-12-L
TO-E250HD-20-L
TO-E250HD-25-L
TO-E250HD-32-L
1/2
3/4
1
1.1/4
weight
[kg/m]
0,46
0,64
0,83
0,28
0,42
0,57
0,73
955

FLEXY
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black smooth synthetic rubber

One steel braid
Black smooth synthetic rubber
Characteristics: Very flexible hose designed for pressure cleaning of sewage systems. Highly resistant to abrasion. Electrical resistance of the internal and external layer is /m. Supplied as a complete
hose assembly with fittings. Other types of fittings and lengths are available - contact TUBES
INTERNATIONAL Technical Department.
code
RM-420311010
RM-420311015
RM-420311020
RM-420311025
RM-420311030
RM-420342010
RM-420342015
RM-420342020
RM-420342025
RM-420342030
I.D.
[mm]
O.D.
[mm]
thread
size
(inlet)
M22x1.5
male
thread
size
(outlet)
length
[m]
300
10
15
20
25
30
10
15
20
25
30
1/4 BSP
male
10,8
1/4 BSP
male
working
pressure
[bar]
1/4 BSP
male
Sewage systems cleaning nozzles

code
956
RM-65105
RM-65104
RM-65100
RM-65108
RM-65110
RM-65140
RM-65148
RM-65114
RM-65113
RM-65115
RM-65120
RM-65125
RM-65130
RM-65146
RM-200049800
RM-200049810
RM-200049820
RM-65161
RM-65162
thread
size
1/4 BSP
female
calibration
035
04
045
05
06
09
12
04
05
055
075
09
10
11
05
06
08
09
12
description
pic.
Nozzle designed to unclog

pipes - without centric hole.
Material: acid-resistant steel.
Nozzle designed to clean and

unclog pipes - with centric
hole.
Rotary nozzle designed to

unclog pipes - without centric
hole.
INDUSTRIAL PNEUMATICS
HOSES
Many different hoses, described in chapters INDUSTRIAL HOSES - air and water and INDUSTRIAL HOSES
- general purpose are designed for compressed air. This part of the catalogue focuses only on hoses typical for
pneumatics and industrial automatics, designed to be connected with push-in fittings and spiral hoses used to
connect pneumatic tools.
VALVES
Valves are intended for controlling and regulating functions in pneumatic systems. Use examples:
- control of the flow direction of compressed air e.g. distribution valve, check valve,
- control of the flow rate of compressed air (throttle valve),
- control of the pressure of compressed air (pressure reducing valve),
- special purpose valves (pneumatic logic elements, rapid drain valve).
AIR PREPARATION
The quality of performance of a pneumatic application, service life of its elements and working safety mostly depend on the quality of air preparation.
Air preparation usually involves:
- removal of liquid and solid impurities (performed by filters),
- reduction of compressed air pressure to the required value (pressure reducing valve),
- lubrication of compressed air (lubricators).
Due to the diversification of requirements for FRL (Filter, Regulator, Lubricator) units, TUBES INTERNATIONAL
supplies devices from three series:
- Skillair - general purpose with connection size from 1/4 to 2,
- New Deal - designed for high pressure with connection size from 1/4 to 1,
- Bit - designed for assembly just at the final receiver with connection size from 1/8 to 1/4.
FITTINGS
TUBES INTERNATIONAL provides:
a) Push-in fittings - quick and easy assembly, user friendly. Despite a wide range of available types of push-in
fittings, a complete system can be built using just four different types. As a result storage costs are significantly
reduced. It is recommended to use hoses made of polyamide or polyurethane with a calibrated outside diameter.
Fitting material: nickel-plated brass (up to 16 bar), technopolymer (up to 12 bar). Push-in fittings can be divided
into:
- R series - general purpose, for hoses with outside diameter from 3 to 14 mm,
- RL FOX series - reduced outside dimensions (e.g. used with small distribution valves, in places where R
series is too big to be used), for hoses with outside diameter from 3 to 10 mm,
- F series- fittings for food industry.
b) Fittings with a cutting ring - B series, designed for copper or plastic hose assemblies:
- max. working pressure: 60 bar,
- material: nickel-plated brass.
c) Screw fittings - C that are screwed onto the plastic hoses and Banjo fittings - D series. Fitting design eliminates
the risk of cutting the hose.
d) Threaded fittings - A series: (straight, reducing, tee, equal cross, etc.) that extend the range of options when
joining installation parts:
- max. working pressure: 60 bar,
- material: nickel-plated brass.
ACTUATORS
Pneumatic actuator is a device that changes compressed air energy into mechanical energy, used to drive mechanisms and machine elements. This group consists of standard actuators according to ISO and VDMA standards,
compact, mini and rotary actuators, grippers, guides and slide units.
957
INDUSTRIAL PNEUMATICS - hoses

PE
Hose material: LDPE polyethylene

Characteristics: Lightweight, flexible hose designed for air, water and other media. Resistant to chemicals,
tasteless, for application with food products. Complies with BGA and FDA standards.
code
O.D.
[mm]
tolerance
[mm]
I.D.
[mm]
NP-PE-04/02
NP-PE-05/03
NP-PE-06/04
NP-PE-08/05
NP-PE-08/06
NP-PE-10/08
NP-PE-12/09
NP-PE-12/10
NP-PE-14/10
NP-PE-16/12
NP-PE-18/14
4
5
6
8
8
10
12
12
14
16
18
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,1
0,15
0,15
0,15
2
3
4
5
6
8
9
10
10
12
14
working
pressure
[bar]
17
12,5
10
13
7
5,6
8
4,5
8
7
6,2
bending
radius
[mm]
20
20
30
40
30
40
60
60
80
90
120
standard
length
[m]
50
50
50
50
50
50
50
50
50
50
50
PA 6
Hose material: PA 6 polyamide (Nylon)

Characteristics: Lightweight, flexible hose with calibrated outside diameter, designed for pneumatic, hydraulic,
fuel and oil installations, lubrication and chemicals. Available in natural colour.
Standards:
DIN 73378.
958
code
O.D.
[mm]
I.D.
[mm]
SH-PA6-04/02
SH-PA6-06/04
SH-PA6-08/06
SH-PA6-10/08
SH-PA6-12/08
SH-PA6-12/10
4
6
8
10
12
12
2
4
6
8
8
10
working
pressure +20C
[bar]
40
25
18
14
25
11
bending
radius
[mm]
22
44
66
88
88
80
standard
length
[m]
100
100
100
100
100
100

PA 12 / PA 12H
Hose material: PA 11/12 polyamide (Nylon)

Characteristics: Lightweight, flexible hose with calibrated outside diameter designed for pneumatic, hydraulic, fuel
and oil installations, lubrication and chemicals. PA 12H version is made of more rigid material,
the drop of pressure in relation to temperature is smaller. Available in a wide range of colours:
natural, black, blue, green, red, yellow. A black hose is recommended for outdoor application.
Standards:
DIN 73378.
code
O.D.
[mm]
NP-PA12-04/02
NP-PA12-04/2,9
NP-PA12-04/03
NP-PA12-05/03
NP-PA12-06/04
NP-PA12-08/05
NP-PA12-08/5,5
NP-PA12-08/5,9
NP-PA12-08/06
NP-PA12-10/06
NP-PA12-10/07
NP-PA12-10/7,5
NP-PA12-10/08
NP-PA12-12/08
NP-PA12-12/09
NP-PA12-12/10
NP-PA12-14/10
NP-PA12-14/11
NP-PA12-15/12
NP-PA12-16/13
NP-PA12-18/14
NP-PA12-20/16
NP-PA12-22/18
4
4
4,3
5
6
8
8
8
8
10
10
10
10
12
12
12
14
14
15
16
18
20
22
NP-PA12H-04/02
NP-PA12H-05/03
NP-PA12H-06/04
NP-PA12H-08/06
NP-PA12H-10/07
NP-PA12H-10/08
NP-PA12H-12/10
4
5
6
8
10
10
12
I.D.
[mm]
PA 12 version
2
2,9
3
3
4
5
5,5
5,9
6
6
7
7,5
8
8
9
10
10
11
12
13
14
16
18
PA 12H version
2
3
4
6
7
8
10
working
pressure
[bar]
bending
radius
[mm]
standard
length
[m]
45
21
30
35
27
30
26
20
19
34
24
20
15
27
19
12
22
16
12
12
16
15
13
20
20
20
25
25
40
40
30
30
50
50
50
60
60
60
85
80
80
90
90
120
120
150
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
45
35
27
19
24
15
12
20
25
25
30
50
60
85
50
50
50
50
50
50
50
959

PA 12 X-HIPHL

(for water-based media +70C)
Characteristics: Lightweight, flexible hose with calibrated outside diameter designed for pneumatic, hydraulic,
fuel and oil installations, lubrication and chemicals. Available in a wide range of colours: natural,
black, blue, green, red, yellow and orange.
Standards:
DIN 73378.
code
O.D.
[mm]
I.D.
[mm]
ZC-PA12/H-04/02
ZC-PA12/H-05/03
ZC-PA12/H-06/04
ZC-PA12/H-08/05
ZC-PA12/H-08/5,5
ZC-PA12/H-08/06
ZC-PA12/H-10/06
ZC-PA12/H-10/7,5
ZC-PA12/H-10/08
ZC-PA12/H-12/08
ZC-PA12/H-12/09
ZC-PA12/H-14/10
ZC-PA12/H-16/12
ZC-PA12/H-18/14
ZC-PA12/H-20/16
4
5
6
8
8
8
10
10
10
12
12
14
16
18
20
2
3
4
5
5,5
6
6
7,5
8
8
9
10
12
14
16
working
press. 23C
[bar]
49
37
29
34
27
21
37
21
16
29
21
24
21
18
16
bursting
press. 23C
[bar]
147
111
87
102
81
63
111
63
48
87
63
72
63
54
48
bending
radius
[mm]
16
20
30
35
40
40
55
60
60
60
60
75
95
100
200
standard
length
[m]
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
Working pressure correction factor at various temperatures

0C
1
960
+23C
1
+30C
0,83
+40C
0,71
+50C
0,62
+60C
0,55
+70C
0,49
+80C
0,45
+90C
0,41
+100C
0,37

PA 12 S40-PHL

(for water-based media +70C)
fuel and oil installations, lubrication and chemicals. Available in a wide range of colours: natural,
black, blue, green, red, yellow and orange.
Standards:
DIN 73378.
code
O.D.
[mm]
I.D.
[mm]
ZC-PA12/S40-PHL-04/02
ZC-PA12/S40-PHL-04/03
ZC-PA12/S40-PHL-05/03
ZC-PA12/S40-PHL-05/035
ZC-PA12/S40-PHL-06/04
ZC-PA12/S40-PHL-08/05
ZC-PA12/S40-PHL-08/06
ZC-PA12/S40-PHL-10/06
ZC-PA12/S40-PHL-10/07
ZC-PA12/S40-PHL-10/075
ZC-PA12/S40-PHL-10/08
ZC-PA12/S40-PHL-12/08
ZC-PA12/S40-PHL-12/09
ZC-PA12/S40-PHL-12/10
ZC-PA12/S40-PHL-14/10
ZC-PA12/S40-PHL-14/11
ZC-PA12/S40-PHL-15/12
ZC-PA12/S40-PHL-16/13
ZC-PA12/S40-PHL-18/14
ZC-PA12/S40-PHL-20/16
ZC-PA12/S40-PHL-22/18
4
4
5
5
6
8
8
10
10
10
10
12
12
12
14
14
15
16
18
20
22
2
3
3
3,5
4
5
6
6
7
7,5
8
8
9
10
10
11
12
13
14
16
18
working
press. 23C
[bar]
44
19
33
23
28
32
20
33
23
20
16
28
20
12
23
16
16
13
17
16
13
bursting
press. 23C
[bar]
132
56
100
70
84
96
60
100
70
60
48
84
60
36
68
48
48
40
52
48
40
bending
radius
[mm]
16
28
20
25
30
35
40
55
58
60
60
60
60
85
75
85
90
110
100
200
200
standard
length
[m]
100
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
50
50
50
50
50
Working pressure correction factor at various temperatures

0C
1
+23C
1
+30C
0,87
+40C
0,74
+50C
0,64
+60C
0,57
+70C
0,52
+80C
0,47
961

PA 12 E

fuel and oil installations, lubrication and chemicals. Available in natural colour.
Standards:
DIN 73378.
962
code
O.D.
[mm]
I.D.
[mm]
SH-PA12-04/02
SH-PA12-04/03
SH-PA12-04/2,9
SH-PA12-05/03
SH-PA12-06/04
SH-PA12-08/05
SH-PA12-08/06
SH-PA12-08/5,5
SH-PA12-10/06
SH-PA12-10/07
SH-PA12-10/08
SH-PA12-10/7,5
SH-PA12-12/08
SH-PA12-12/09
SH-PA12-12/10
SH-PA12-14/10
SH-PA12-14/11
SH-PA12-15/12
SH-PA12-16/13
SH-PA12-18/14
SH-PA12-20/16
SH-PA12-22/18
4
4
4
5
6
8
8
8
10
10
10
10
12
12
12
14
14
15
16
18
20
22
2
3
2,9
3
4
5
6
5,5
6
7
8
7,5
8
9
10
10
11
12
13
14
16
18
working
pressure +20C
[bar]
40
18
15
30
25
26
18
24
28
24
14
18
27
18
11
22
14
15
14
17
15
13
bending
radius
[mm]
15
30
30
30
38
35
57
48
35
45
76
66
80
83
70
90
83
100
90
190
180
200
standard
length
[m]
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100

PA 12 MULTI

(for fluids containing water to +65C)
Characteristics: Multihose with a black polyurethane outside cover widely used in pneumatic, hydraulic, fuel and
oil installations, lubrication and chemicals. Different colours of hoses in the bundle enable easy
recognition of each circuit or medium being transferred.
code
ZC-M422A
ZC-M4252A
ZC-M4272A
ZC-M642A
ZC-M862A
ZC-M1082A
ZC-M12102A
ZC-M14122A
ZC-M15122A
ZC-M151252A
ZC-M423A
ZC-M4253A
ZC-M4273A
ZC-M643A
ZC-M863A
ZC-M1083A
ZC-M12103A
ZC-M14123A
ZC-M15123A
ZC-M151253A
ZC-M424A
ZC-M4254A
ZC-M4274A
ZC-M644A
ZC-M864A
ZC-M1084A
ZC-M12104A
ZC-M14124A
ZC-M15124A
ZC-M151254A
ZC-M425A
ZC-M4255A
ZC-M4275A
ZC-M645A
ZC-M865A
ZC-M1085A
ZC-M12105A
ZC-M427A
ZC-M4257A
ZC-M4277A
ZC-M647A
ZC-M867A
ZC-M1087A
ZC-M4212A
ZC-M42512A
ZC-M42712A
ZC-M6412A
ZC-M8612A
number
of hoses
12
O.D.
[mm]
I.D.
[mm]
4
4
4
6
8
10
12
14
15
15
4
4
4
6
8
10
12
14
15
15
4
4
4
6
8
10
12
14
15
15
4
4
4
6
8
10
12
4
4
4
6
8
10
4
4
4
6
8
2
2,5
2,7
4
6
8
10
12
12
12,5
2
2,5
2,7
4
6
8
10
12
12
12,5
2
2,5
2,7
4
6
8
10
12
12
12,5
2
2,5
2,7
4
6
8
10
2
2,5
2,7
4
6
8
2
2,5
2,7
4
6
wall
thickness
[mm]
1
0,75
0,65
1
1
1
1
1
1,5
1,25
1
0,75
0,65
1
1
1
1
1
1,5
1,25
1
0,75
0,65
1
1
1
1
1
1,5
1,25
1
0,75
0,65
1
1
1
1
1
0,75
0,65
1
1
1
1
0,75
0,65
1
1
working
pressure
[bar]
33
22
17
20
14
11
9
7,5
11
9
33
22
17
20
14
11
9
7,5
11
9
33
22
17
20
14
11
9
7,5
11
9
33
22
17
20
14
11
9
33
22
17
20
14
11
33
22
17
20
14
bursting
pressure
[bar]
132
88
68
80
56
44
36
30
44
36
132
88
68
80
56
44
36
30
44
36
132
88
68
80
56
44
36
30
44
36
132
88
68
80
56
44
36
132
88
68
80
56
44
132
88
68
80
56
weight
[g/m]
40
36
35
60
78
128
187
211
267
247
57
51
48
76
118
148
215
243
303
273
70
62
60
107
140
222
317
359
467
427
90
81
73
132
175
268
364
116
102
97
185
243
308
199
176
167
267
426
963

PUR
Hose material: PUR polyurethane

Characteristics: Lightweight, flexible hose widely used in pneumatic and hydraulic applications, tool lines, industrial robots, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Remains flexible at low
temperatures. Shore (A) hardness 90. Available in natural, black and blue colour.
code
O.D.
[mm]
I.D.
[mm]
PP-PUR-04/2,3
PP-PUR-04/2,5
PP-PUR-05/3,1
PP-PUR-06/04
PP-PUR-08/5,7
PP-PUR-10/7,5
PP-PUR-12/09
PP-PUR-14/11
4
4
5
6
8
10
12
14
2,3
2,5
3,1
4
5,7
7,5
9
11
working
pressure
[bar]
14,3
12,7
13,3
11,3
10,7
8,7
9
9
bending
radius
[mm]
12
12
13
15
30
45
55
60
standard
length
[m]
50
50
50
50
50
50
50
50
PUR E
Hose material: PUR polyurethane

Characteristics: Lightweight, flexible hose widely used in pneumatic and hydraulic applications, tool lines, industrial robots, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Remains flexible at
low temperatures. Shore (A) hardness is 95. Available in natural and blue colour.
code
SH-PURE-04/2,5
SH-PURE-04/2,5BL
SH-PURE-06/04
SH-PURE-06/04BL
SH-PURE-08/5,7
SH-PURE-08/5,7BL
SH-PURE-10/7,5
SH-PURE-10/7,5BL
SH-PURE-12/09
SH-PURE-12/09BL
964
O.D.
[mm]
I.D.
[mm]
4
4
6
6
8
8
10
10
12
12
2,5
2,5
4
4
5,7
5,7
7,5
7,5
9
9
working
pressure +20C
[bar]
12
12
11
11
8
8
8
8
8
8
bending
radius
[mm]
20
20
25
25
35
35
40
40
45
45
standard
length
[m]
50
50
50
50
50
50
50
50
50
50

PUR F
Hose material: Polyether-polyurethane

Characteristics: Lightweight, highly flexible hose used in applications that are in frequent contact with water
(very high resistance to microbes and hydrolysis), detergents and solvents. Remains flexible at
low temperatures. High resistance to abrasion and kinking. Calibrated outside diameter allows
to use push-in fittings. Shore (A) hardness 98. Meets FDA and PZH standards. Available in
transparent, semi-transparent black, blue, green and red colour versions.
code
O.D.
[mm]
I.D.
[mm]
PP-PUR-F-04/2,5
PP-PUR-F-06/3,9
PP-PUR-F-08/5,5
PP-PUR-F-10/7
PP-PUR-F-12/8
4
6
8
10
12
2,5
3,9
5,5
7
8
working
press. 20C
[bar]
24
22
16
16
16
working
press. 60C
[bar]
12
10
10
10
10
bending
radius
[mm]
12
15
25
40
60
standard
length
[m]
50
50
50
50
50
PUR ASS
Hose material: Antistatic polyether-polyurethane

Characteristics: Lightweight, very flexible hose used in applications where static charge build-up must be
avoided. Calibrated outside diameter allows to use push-in fittings. Particularly recommended
for electronics and varnish industry, gas installations and mining. Surface resistance <104
code
PP-PUR-ASS-04/2,5
PP-PUR-ASS-05/3,1
PP-PUR-ASS-06/4
PP-PUR-ASS-08/5,8
PP-PUR-ASS-10/7,5
O.D.
[mm]
I.D.
[mm]
4
5
6
8
10
2,5
3,1
4
5,8
7,5
working
press. 20C
[bar]
18
19
19
12
11
working
press. 60C
[bar]
10
10
10
8
7
bending
radius
[mm]
10
12
15
28
35
standard
length
[m]
100
100
100
100
100
965

FLAMEX
Hose material: Flame resistant PUR polyurethane

Characteristics: Lightweight, flexible hose designed for air, water and other media. Resistant to flame, weld
spatter and hot metal turnings. Resistant to hydrolysis, biological corrosion, UV radiation, solvents and detergents. Withstands 0.9 bar vacuum. Calibrated outside diameter allows to use
push-in fittings.
code
O.D.
[mm]
I.D.
[mm]
PP-FLAMEX-04/02
PP-FLAMEX-08/04
PP-FLAMEX-10/06
PP-FLAMEX-12/08
PP-FLAMEX-14/10
4
8
10
12
14
2
4
6
8
10
working
pressure
[bar]
20
20
20
20
20
bending
radius
[mm]
7
15
20
28
45
standard
length
[m]
50
50
50
50
50
DUO PU
Hose material: PUR polyurethane (blue + black)

Characteristics: Lightweight, very flexible twin hose widely used in pneumatic and hydraulic applications, tool
lines, industrial robots, etc. Resistant to abrasion, solvents, fuels, hydrocarbons. Remains flexible at low temperature. Shore (A) hardness 90.
code
O.D.
[mm]
I.D.
[mm]
NP-DUO-PU-04/02
NP-DUO-PU-06/04
NP-DUO-PU-08/06
NP-DUO-PU-10/07
4
6
8
10
2
4
6
7
966
working
pressure
[bar]
23
14
10
12
bending
radius
[mm]
20
30
35
40
standard
length
[m]
50
50
50
50

PVDF
Hose material:
Polyvinylidene fluoride PVDF

(complies with FDA)
Characteristics: Hose with outstanding mechanical parameters. Excellent resistance to high temperature, high
pressure, UV radiation and many chemicals. Sterile, non-flammable and with low gas permeability. Therefore widely used in food, pharmaceutical and chemical industry.
code
O.D.
[mm]
I.D.
[mm]
tolerance
[mm]
NP-PVDF-04/2
NP-PVDF-06/4
NP-PVDF-08/6
NP-PVDF-10/8
NP-PVDF-12/10
4
6
8
10
12
2
4
6
8
10
0,1
0,1
0,1
0,1
0,1
working
press. 23C
[bar]
166
100
71
55
45
bending
radius
[mm]
60
75
85
100
125
weight
[g/m]
17
28
39
50
62
AC
Hose material: Blue PA 11/12 polyamide (Nylon)

Characteristics: Spiral hose designed for pneumatic control systems, pneumatic tools, industrial robots, etc.
Supplied as a hose assembly with 100 mm straight ends with fittings (male thread).
code
O.D.
[mm]
I.D.
[mm]
NP-AC-64/25
NP-AC-64/50
NP-AC-64/75
NP-AC-86/25
NP-AC-86/50
NP-AC-86/75
NP-AC-86/100
NP-AC-108/25
NP-AC-108/50
NP-AC-108/75
NP-AC-108/100
NP-AC-129/25
NP-AC-129/50
NP-AC-129/75
NP-AC-129/100
NP-AC-1512/25
NP-AC-1512/50
NP-AC-1512/75
6
6
6
8
8
8
8
10
10
10
10
12
12
12
12
15
15
15
4
4
4
6
6
6
6
8
8
8
8
9
9
9
9
12
12
12
working
length
[m]
2,5
5
7,5
2,5
5
7,5
10
2,5
5
7,5
10
2,5
5
7,5
10
2,5
5
7,5
outside coil
diameter
[mm]
72
72
72
76
76
76
76
120
120
120
120
124
124
124
124
190
190
190
number of
coils
23
46
72
17
36
54
62
16
32
50
70
16
32
50
70
10
21
31
working
pressure
[bar]
27
27
27
19
19
19
19
15
15
15
15
19
19
19
19
12
12
12
fitting
male thread
[inch]
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
without fittings
without fittings
without fittings
967

SPN
Hose material: Blue PA 11/12 polyamide (Nylon)

code
O.D.
[mm]
I.D.
[mm]
NP-SPN-05/025
NP-SPN-05/050
NP-SPN-05/075
NP-SPN-05/100
NP-SPN-06/025
NP-SPN-06/050
NP-SPN-06/075
NP-SPN-06/100
NP-SPN-08/025
NP-SPN-08/050
NP-SPN-08/075
NP-SPN-08/100
NP-SPN-10/025
NP-SPN-10/050
NP-SPN-10/075
NP-SPN-10/100
NP-SPN-12/025
NP-SPN-12/050
NP-SPN-12/075
NP-SPN-12/100
5
5
5
5
6
6
6
6
8
8
8
8
10
10
10
10
12
12
12
12
3
3
3
3
4
4
4
4
6
6
6
6
8
8
8
8
9
9
9
9
working
length
[m]
2,5
5
7,5
10
2,5
5
7,5
10
2,5
5
7,5
10
2,5
5
7,5
10
2,5
5
7,5
10
outside coil
diameter
[mm]
35
35
35
35
72
72
72
72
76
76
76
76
120
120
120
120
124
124
124
124
working
pressure
[bar]
35
35
35
35
27
27
27
27
19
19
19
19
15
15
15
15
19
19
19
19
number of
coils
40
82
123
160
23
47
72
112
18
36
54
84
16
32
50
67
12
33
49
66
SFT
Working temp.: From 0C up to +40C
Characteristics: Holder for pneumatic hoses. Facilitates building of a pneumatic system, saves space and
increases resistance to vibrations.
code
hose O.D.
[mm]
number
of hoses
A
[mm]
B
[mm]
C
[mm]
D
[mm]
E
[mm]
h
[mm]
h1
[mm]
[mm]
ZC-SFT-04
ZC-SFT-06
ZC-SFT-08
ZC-SFT-10
ZC-SFT-12
ZC-SFT-14
4
6
8
10
12
14
10
10
10
10
4
4
9
9
12
15
19
21
114
114
143
172
78
87
11,7
11,7
14,6
17,4
20,5
22,5
8
10
12
13,8
16,8
18,8
19,5
19,5
19,5
19,5
19,5
19,5
5
7
9
10,8
14
16
3
3
3
3
3
3
2,5
2,5
3,1
4,1
4,1
4,1
968

AC E
Hose material: Blue PA 12 polyamide (Nylon)

Available as a hose assembly with 100 mm straight ends with fittings (male thread).
code
SH-ACE-86/25
SH-ACE-86/50
SH-ACE-86/75
SH-ACE-86/100
SH-ACE-108/50
SH-ACE-108/100
O.D.
[mm]
I.D.
[mm]
8
8
8
8
10
10
6
6
6
6
8
8
working
length
[m]
2,5
5
7,5
10
5
10
outside coil
diameter
[mm]
76
76
76
76
96
96
number of
coils
17
36
54
62
32
70
working
press. 20C
[bar]
15
15
15
15
13
13
fitting
male thread
[inch]
1/4
1/4
1/4
1/4
3/8
3/8
SPP E
Hose material: Blue PUR polyurethane

Characteristics: Highly flexible spiral hose resistant to abrasion, breaking and kinking. Designed for pneumatic
control systems, pneumatic tools, industrial robots, etc. Available as a hose assembly with 100
mm and 500 mm straight ends with fittings (male thread).
code
O.D.
[mm]
I.D.
[mm]
SH-SPPE-06/20
SH-SPPE-08/20
SH-SPPE-08/40
SH-SPPE-08/75
SH-SPPE-10/60
6
8
8
8
10
4
5
5
5
6,5
working
length
[m]
2
2
4
7,5
6
outside coil
diameter
[mm]
40
44
44
44
55
coil block
length
[mm]
160
180
400
750
640
working
press. 20C
[bar]
11
12
12
12
9
fitting
male thread
[inch]
1/4
1/4
1/4
1/4
1/4
969

SPP
Hose material: Blue PUR polyurethane

Characteristics: Highly flexible spiral hose resistant to abrasion, breaking and kinking. Designed for pneumatic
control systems, pneumatic tools, industrial robots, etc. Available as a hose assembly with 100
mm and 500 mm straight ends with fittings (male thread).
code
O.D.
[mm]
I.D.
[mm]
NP-SPP-06/020
NP-SPP-06/030
NP-SPP-06/040
NP-SPP-06/060
NP-SPP-06/075
NP-SPP-06/080
NP-SPP-08/020
NP-SPP-08/030
NP-SPP-08/040
NP-SPP-08/060
NP-SPP-08/075
NP-SPP-08/080
NP-SPP-10/020
NP-SPP-10/030
NP-SPP-10/040
NP-SPP-10/060
NP-SPP-10/075
NP-SPP-10/080
NP-SPP-12/020
NP-SPP-12/030
NP-SPP-12/040
NP-SPP-12/060
NP-SPP-12/075
NP-SPP-12/080
NP-SPP-16/020
NP-SPP-16/030
NP-SPP-16/040
NP-SPP-16/060
NP-SPP-16/075
NP-SPP-16/080
6
6
6
6
6
6
8
8
8
8
8
8
10
10
10
10
10
10
12
12
12
12
12
12
16
16
16
16
16
16
4
4
4
4
4
4
5
5
5
5
5
5
6,5
6,5
6,5
6,5
6,5
6,5
8
8
8
8
8
8
11
11
11
11
11
11
970
working
length
[m]
2
3
4
6
7,5
8
2
3
4
6
7,5
8
2
3
4
6
7,5
8
2
3
4
6
7,5
8
2
3
4
6
7,5
8
outside coil
diameter
[mm]
37
37
37
37
37
37
42
42
42
42
42
42
52
52
52
52
52
52
65
65
65
65
65
65
107
107
107
107
107
107
coil block
length
[mm]
160
270
360
495
665
710
180
335
400
630
750
800
190
340
400
640
750
800
180
325
400
590
730
780
145
240
290
450
575
625
working
press. 20C
[bar]
14
14
14
14
14
14
16
16
16
16
16
16
14
14
14
14
14
14
14
14
14
14
14
14
13
13
13
13
13
13
fitting
male thread
[inch]
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/2
1/2
1/2
1/2
INDUSTRIAL PNEUMATICS - SPEEDFIT system

SPEEDFIT is a push-in system that enables very fast assembly of
compressed air pipe systems. The system can be assembled using plastic or metal pipes (copper, brass, aluminium) in an outside
diameter range from 12 mm to 28 mm (+0.05/-0.1 mm). Flexible
hoses made of polyamide, polyethylene or polyurethane can be
used as well. Working temperature from -20C to +70C. Working
pressure 10 bar (+23C), 7 bar (+70C). System includes polyamide
and aluminium pipes, hoses, straight fittings, adaptors, elbows,
tees, etc. Widely used for assembly of compressed air systems.
Pipes with outside diameter 12 22 mm
connection
disconnection
push the collet square against
the face of the fitting
remove the pipe
Pipes with outside diameter 28 mm

connection
disconnection
push the collet square against

the face of the fitting
remove the pipe
thread
size
[inch]
code
pipe O.D.
[mm]
JG-PM011213E
12
3/8
JG-PM011214E
12
1/2
JG-PM011514E
15
1/2
JG-PM011516E
15
3/4
JG-PM011814E
18
1/2
JG-PM012216E
22
3/4
code
pipe O.D.
[mm]
JG-PM0312E
12
JG-PM0315E
15
JG-PM0318E
18
JG-PM0322E
22
JG-PM0328E
28
code
pipe O.D.
[mm]
JG-PM0412E
12
JG-PM0415E
15
JG-PM0418E
18
JG-PM0422E
22
JG-PM0428E
28
description
Straight connector with male
thread (push-in end/male
thread).
Material: plastic.
Thread seal by ring gasket.
description
90 elbow.
Material: plastic.
description
Straight connector.
Material: plastic.
971

pipe O.D.
[mm]
code
972
JG-PM0212E
12
JG-PM0215E
15
JG-PM0218E
18
JG-PM0222E
22
JG-PM0228E
28
description
Tee.
Material: plastic.
code
pipe O.D.
[mm]
thread
size
[inch]
JG-PM051213E
JG-PM051214E
JG-PM051513E
JG-PM051514E
JG-PM051814E
JG-PM052214E
JG-PM052216E
12
12
15
15
18
22
22
3/8
1/2
3/8
1/2
1/2
1/2
3/4
code
pipe O.D.
[mm]
stem O.D.
[mm]
JG-PM221212E
12
12
JG-PM221515E
15
15
JG-PM221818E
18
18
JG-PM222222E
22
22
code
stem O.D.
[mm]
pipe O.D.
[mm]
JG-PM061512E
15
12
JG-PM061815E
18
15
JG-PM062215E
22
15
JG-PM062218E
22
18
JG-PM062815E
28
15
JG-PM062822E
28
22
code
pipe O.D.
[mm]
pipe O.D.
[mm]
JG-PM3018AE
18
15
JG-PM3022AE
22
15
code
pipe O.D.
[mm]
JG-PMTT22E
22
description
Stem connector with male

thread.
Material: plastic.
Thread seal by ring gasket.
description
Push-in 90 elbow.
Material: plastic.
description
Reducing connector.
Material: plastic.
description
Reducing tee.
Material: plastic.
description
Water trap tee.

Material: plastic.
code
pipe O.D.
[mm]
JG-WTC28
28
description
Water trap tee for 28 mm tee

Material: brass.
code
pipe O.D.
[mm]
thread
size
[inch]
JG-PM15WB
15
1/2
description
Wingback elbow.
Material: brass.
JG-PM22WB
22
3/4
code
pipe O.D.
[mm]
thread
size
[inch]
JG-MM011504N
15
1/2
JG-MM012206N
22
3/4
JG-MM012808N
28
JG-MM012818N
28
1*
code
pipe O.D.
[mm]
thread
size
[inch]
JG-MM051504N
15
1/2
JG-MM052206N
22
3/4
JG-MM052816N
28
3/4*
JG-MM052818N
28
1*
code
pipe O.D.
[mm]
thread
size
[inch]
JG-MM501514N
15
1/2
JG-MM502216N
22
3/4
code
pipe O.D.
[mm]
JG-15RA
15
description
Straight connector with BSPT

thread.
* - BSP thread
Material: brass.
description
Stem connector with BSPT

thread.
* - BSP thread
Material: brass.
description
Stem connector with female

thread.
Material: brass.
description
Disconnection tool.
JG-22RA
22
973
code
pipe O.D.
[mm]
JG-PM0812R
12
JG-PM0815E
15
JG-PM0818E
18
JG-PM0822E
22
JG-PM0828E
28
code
thread size
[inch]
JG-LWSK1/2
4x1/2
description
Blank plug.
description
Plastic porting block

(three 1/2 blank plugs).
code
inlet
thread
[inch]
outlet
thread
[inch]
JG-WALLBOX1/2
1/2
3x1/2
description
Aluminium porting block

(two 1/2 blank plugs).
JG-WALLBOX3/4
3/4
3x1/2
code
pipe O.D.
[mm]
JG-PM4615E
15
description
Pipe bland cap.
974
JG-PM4622E
22
code
pipe O.D.
[mm]
JG-PM1912E
12
JG-PM1915E
15
JG-PM1918E
18
JG-PM1922E
22
code
pipe O.D.
[mm]
JG-PM1812R
12
JG-CM1815S
15
JG-CM1818S
18
JG-CM1822S
22
description
Collet cover preventing accidental disconnection.
description
Collet safety locking ring preventing accidental disconnection.
code
pipe O.D.
[mm]
JG-RK12
12
JG-RK15
15
JG-RK18
18
JG-RK22
22
JG-RK28
28
code
pipe or hose O.D.

[mm]
JG-TS28
4 28
JG-TS28EK
code
pipe or hose O.D.

[mm]
JG-AL30
4 30
description
Pipe clip.
description
Pipe and hose cutter.
Spare blade.
description
Aluminium pipe cutter.
code
pipe O.D.
[mm]
pipe I.D.
[mm]
JG-PA-RM1209-3M-B
12
JG-PA-RM1512-3M-B
15
12
JG-PA-RM1814-3M-B
18
14
JG-PA-RM2218-3M-B
22
18
JG-PA-RM2823-3M-B
28
23
code
pipe O.D.
[mm]
pipe I.D.
[mm]
JG-PA-RM1209-3M-E
12
JG-PA-RM1512-3M-E
15
12
JG-PA-RM1814-3M-E
18
14
JG-PA-RM2218-3M-E
22
18
JG-PA-RM2823-3M-E
28
23
code
pipe O.D.
[mm]
pipe I.D.
[mm]
JG-AL-M1512-3M-10B
15
12
JG-AL-M1816-3M-10B
18
16
JG-AL-M2220-3M-10B
22
20
JG-AL-M2826-3M-10B
28
26
description
Rigid Nylon pipe.

Colour: blue.
Length: 3 m.
description
Rigid Nylon pipe.

Colour: black.
Length: 3 m.
description
Aluminium pipe.
Colour: blue.
Length: 3 m.
975
INDUSTRIAL PNEUMATICS - fittings

Push-in fittings - R series
Material:
Nickel-plated brass,
technopolymer
Working press.: 16 bar (brass), 12 bar (technopolymer)
Vacuum:
Vacuum
Working temp.: From -20C up to +80C (brass),
From -20C up to +60C (technopolymer)
Seal:
NBR
Push-in fittings are designed to connect pneumatic
hoses with calibrated outside diameter. The connection is
achieved by pushing the hose into the fitting. To disconnect, the body has to be pressed towards release bushing.
It is recommended to use these fittings with hoses made
of polyamide. The hoses made of polyurethane or other
materials can also be used.
R series push-in fittings and Fox series miniature fittings, manufactured by Metal Work, are the best solution for
connecting pipes and actuators in pneumatic systems. Available in various configurations for virtually unlimited
application. Quick and easy to use, the push-in fittings can be re-used thousands of times without affecting the
pneumatic and mechanical seal in any way. The clamping spring of special shape grips the pipe without scratching
or deforming it and facilitates release.
Construction:
D (hose O.D.):
3, 3,17, 4, 5, 6, 8, 10, 12, 14 mm
1
2
3
4

5
6
7
Ring or release bushing: technopolymer

Locking bushing: brass or technopolymer
Body: brass or technopolymer
Clamping spring: stainless steel (for pipes 3 and 3,17
and R31 and R32: brass gripper)
Spring supporting ring: technopolymer
Seal: NBR
O-ring: NBR
O-ring (pos. 7):

thread
O-ring
M3
2,6x1
M5
(3 and 3,17)
3x1,2
M5
M7
M12x1,5
1/8
1/4
3/8
1/2
3,5x1,2
5x1,5
9,75x1,78
7,66x1,78
10,82x1,78
14x1,78
17,13x2,62
G (the size of a connection thread):

M3, M5, M7 M12x1,5, 1/8, 1/4, 3/8, 1/2
Push-in fittings R series
Push-in fittings RL (FOX) series
976
FOX mini series

RL (FOX) miniature series (with reduced outside dimensions, for hoses with outside diameter ranging from 3 to 10
mm) is intended to allow the use of push-in fittings where
the room for assembly is limited (e.g. small distribution
valves). In the RL 4 and 8 fittings the release bushing
has patented screwdriver slots to facilitate disconnection
in tight construction.
A mounting grip of RL21 and RL22 fittings (elbow and tee)
has a ring for fixing to the wall asymmetrically in order to
contain the head of a screw within the overall dimensions
of the fitting.
RL fittings 8 are not compatible with R7, R8 and R9 fittings
of an older R series.

Despite a wide range of available types of push-in

fittings, a complete system can be created using
just four different types (R1, R4, R6, R5). Therefore
storage costs are significantly reduced.
All fittings with a male parallel thread are equipped

with an O-ring (Metal Work patented solution). The
use of an O-ring considerably improves the seal of
angled, rough, and slightly convex surfaces. PTFE
tape does not have to be used at all.
Fittings can be assembled with an Allen wrench or

pneumatic tools. All elbows and tees are rotary so
assembly time is significantly reduced.
The pipe is easy to disassemble (by gentle pressing

both a release bushing and fitting - by radial push
of spanner).
A single tee can give a central or lateral tee.
A special version (e.g. R15, R16) with two O-rings

allows maximum orientation so that the fitting can
follow hose movement.
977

code
R series
MW-2001004
MW-2001005
MW-2001006
MW-2001019
MW-2001014
MW-2001015
MW-2001016
MW-2001017
FOX series
MW-2001B01
MW-2001B02
MW-2001A01
MW-2001A02
MW-2L01001
MW-2L01020
MW-2L01002
MW-2L01003
MW-2L01000
MW-2L01021
MW-2L01101
MW-2L01007
MW-2L01008
MW-2L01009
MW-2L01010
MW-2L01011
MW-2L01102
MW-2L01012
MW-2L01013
-
Straight fitting male

cylindrical thread,
brass
Straight fitting,
female thread,
brass
R1
R2
hose O.D.
[mm]
thread
size
3
3
3,17
3,17
4
4
4
4
5
5
5
6
6
6
6
6
8
8
8
8
10
10
12
12
12
14
14
M3
M5
M3
M5
M5
M7
1/8
1/4
M5
1/8
1/4
M5
M7
M12x1,5
1/8
1/4
1/8
1/4
3/8
M12x1,5
1/4
3/8
1/4
3/8
1/2
3/8
1/2
Straight fitting, male

conical thread,
brass
R 1C
code
R series
MW-2001C15
MW-2001C16
MW-2001Z07
MW-2001Z08
978
FOX series
MW-2L01C02
MW-2L01C07
MW-2L01C08
MW-2L01C09
MW-2L01C10
MW-2L01C11
MW-2L01C13
MW-2L01C14
-
hose O.D.
[mm]
thread
size
4
6
6
8
8
8
10
10
12
12
6
6
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
3/8
1/2
M12X1
M12X1.25
code
R series
MW-2002003
MW-2002004
-
FOX series
MW-2002B02
MW-2002A02
MW-2L02001
MW-2L02002
MW-2L02005
MW-2L02006
MW-2L02007
MW-2L02008
hose O.D.
[mm]
thread
size
3
3,17
4
4
5
5
6
6
8
8
M5
M5
1/8
1/4
1/8
1/4
1/8
1/4
1/8
1/4
Straight pass-through fitting,

brass
R3
code
R series
MW-2003002
MW-2003006
MW-2003007
FOX series
MW-2003A02
MW-2003A01
MW-2L03001
MW-2L03003
MW-2L03004
MW-2L03005
MW-2L03301
MW-2L03302
MW-2L03303
MW-2L03304
MW-2L03305
-
hose O.D.
[mm]
hose O.D.
[mm]
3
3,17
4
6
8
10
4
4
6
6
8
5
12
14
3
3,17
4
6
8
10
6
8
8
10
10
5
12
14

90 elbow, pass-through,
brass
Straight stem fitting,

brass
R4
R6
code
R series
MW-2004002
MW-2004006
MW-2004007
FOX series
MW-2004A02
MW-2004A01
MW-2L04001
MW-2L04003
MW-2L04004
MW-2L04005
-
hose O.D.
[mm]
3
3,17
4
5
6
8
10
12
14
Tee fitting,
pass-through,
brass
R5
code
R series
MW-2005002
MW-2005006
MW-2005007
FOX series
MW-2005A02
MW-2005A01
MW-2L05001
MW-2L05003
MW-2L05004
MW-2L05005
-
hose O.D.
[mm]
3
3,17
4
5
6
8
10
12
14
code
R series
MW-2006A02
MW-2006A01
MW-2006001
MW-2006002
MW-2006003
MW-2006004
MW-2006005
MW-2006006
MW-2006000
MW-2006007
MW-2006008
MW-2006009
MW-2006010
MW-2006011
MW-2006012
MW-2006013
MW-2006019
MW-2006014
MW-2006015
MW-2006016
MW-2006017
MW-2006101
MW-2006102
hose O.D.
[mm]
thread
size
3
3,17
4
4
4
5
5
5
6
6
6
8
8
8
10
10
12
12
12
14
14
6
8
M5
M5
M5
1/8
1/4
M5
1/8
1/4
M5
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/4
3/8
1/2
3/8
1/2
M12x1,5
M12x1,5
Straight extended
stem fitting
with thread,
brass
R 18
Straight stem fitting,
brass
R7
code
R series
MW-2007001
MW-2007002
MW-2007003
MW-2007004
MW-2007005
MW-2007006
MW-2007007
hose O.D.
[mm]
code
R series
MW-2018002
MW-2018007
MW-2018008
MW-2018009
MW-2018010
MW-2018011
MW-2018012
MW-2018013
hose O.D.
[mm]
thread
size
4
6
6
8
8
8
10
10
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
4
5
6
8
10
12
14
979

code
R series
MW-2008001
MW-2008003
MW-2008005
MW-2008015
MW-2008009
MW-2008010
MW-2008011
MW-2008014
MW-2008017
MW-2008018
MW-2009001
FOX series
MW-2008A01
MW-2008A02
MW-2L08002
MW-2L08004
MW-2L08006
MW-2L08007
MW-2L08008
-
Reducing fitting,
brass
Bulkhead straight fitting,
R8
R 10
plug O.D.
[mm]
hose O.D.
[mm]
4
4
5
6
6
8
8
8
10
10
12
12
12
12
14
14
14
4
3
3,17
4
4
5
4
5
6
6
8
10
4
6
8
8
10
12
6
brass
code
R series
MW-2011002
MW-2011006
MW-2011007
FOX series
MW-2011A02
MW-2011A01
MW-2L11001
MW-2L11003
MW-2L11004
MW-2L11005
-
hose O.D.
[mm]
thread
size
3
3,17
4
6
8
10
5
12
14
M8x0,75
M8x0,75
M11x1
M13x1
M15x1
M17x1
M14x1
M22x1
M24x1
BANJO elbow body,

brass
R 13
Blank plug,
brass, (technopolymer)
R9
code
R series
MW-2010A02
MW-2L10001*
MW-2010002
MW-2L10003*
MW-2L10004*
MW-2L10005*
MW-2L10006*
MW-2010007
- made of technopolymer
980
hose O.D.
[mm]
3
4
5
6
8
10
12
14
code
R series
MW-2012A02
MW-2012A01
MW-2012001
MW-2012002
MW-2012003
MW-2012004
MW-2012005
MW-2012006
MW-2012007
MW-2012008
MW-2012009
MW-2012010
MW-2012011
MW-2012012
MW-2012013
MW-2012014
hose O.D.
[mm]
thread
size
3
3,17
4
4
5
5
6
6
8
8
8
10
10
12
12
12
M5
M5
M5
1/8
M5
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
3/8
1/4
1/2

code
R series
MW-2013001
MW-2013002
MW-2013003
MW-2013004
MW-2013005
MW-2013006
MW-2013007
MW-2013008
MW-2013009
MW-2013010
MW-2013011
MW-2013012
MW-2013013
MW-2013014
BANJO tee body,

brass
Rotary tee,
male thread,
brass
R 14
R 16
hose O.D.
[mm]
thread
size
4
4
5
5
6
6
8
8
8
10
10
12
12
12
M5
1/8
M5
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
3/8
1/4
1/2
code
R series
MW-2015003
MW-2015004
MW-2015010
MW-2015011
MW-2015012
-
FOX series
MW-2L15001
MW-2L15020
MW-2L15002
MW-2L15005
MW-2L15106
MW-2L15021
MW-2L15006
MW-2L15007
MW-2L15008
MW-2L15009
MW-2L15013
MW-2L15014
Rotary 90 elbow,
male thread,
brass
code
FOX series
MW-2L14001
MW-2L14002
MW-2L14106
MW-2L14005
MW-2L14006
MW-2L14007
MW-2L14008
-
hose O.D.
[mm]
thread
size
3
3,17
3
3,17
4
4
5
5
6
6
8
6
8
10
12
12
12
M3
M3
M5
M5
M5
1/8
M5
1/8
M5
1/8
1/8
1/4
1/4
1/4
1/4
3/8
1/2
thread
size
4
4
4
5
5
6
6
6
8
6
8
10
12
12
12
8
10
M5
M7
1/8
M5
1/8
1/8
M5
M7
1/8
1/4
1/4
1/4
1/4
3/8
1/2
3/8
3/8
Straight pass-through fitting,

technopolymer
R 15
R series
MW-2014101
MW-2014102
MW-2014103
MW-2014104
MW-2014003
MW-2014004
MW-2014009
MW-2014010
MW-2014011
MW-2014012
hose O.D.
[mm]
R 19
code
R series
MW-2019001
MW-2019002
MW-2019003
MW-2019004
MW-2019005
MW-2019006
hose O.D.
[mm]
4
5
6
8
10
12
981

code
R series
MW-2020001
MW-2020002
MW-2020003
MW-2020004
MW-2020016
MW-2020005
MW-2020006
MW-2020007
MW-2020008
MW-2020009
MW-2020010
MW-2020011
MW-2020012
Rotary 90 elbow,
male thread,
technopolymer
Tee pass-through,
technopolymer
R 20
R 22
hose O.D.
[mm]
thread size
4
4
5
5
6
6
8
6
8
10
12
12
12
M5
1/8
M5
1/8
M5
1/8
1/8
1/4
1/4
1/4
1/4
3/8
1/2
Rotary tee,
male thread
technopolymer
R 20/A
code
R series
MW-2020A01
MW-2020A02
MW-2020A03
MW-2020A04
MW-2020A05
MW-2020A06
MW-2020A07
MW-2020A08
MW-2020A09
MW-2020A10
MW-2020A11
MW-2020A12
hose O.D.
[mm]
thread size
4
4
5
5
6
8
6
8
10
12
12
12
M5
1/8
M5
1/8
1/8
1/8
1/4
1/4
1/4
1/4
3/8
1/2
code
R series
MW-2022002
MW-2022005
MW-2022006
code
R series
MW-2021002
MW-2021005
MW-2021006
982
FOX series
MW-2L21001
MW-2L21003
MW-2L21004
-
hose O.D.
[mm]
4
5
6
8
10
12
4
5
6
8
10
12
Y fitting,
technopolymer
R 23
code
hose O.D.
[mm]
R series
MW-2023001
MW-2023002
MW-2023003
MW-2023004
4
5
6
8
Y fitting,
with stem fitting,
technopolymer
R 24
code
R series
MW-2024001
MW-2024003
hose O.D.
[mm]
hose O.D.
[mm]
4
6
4
6
Parallel Y fitting
with male thread,
technopolymer
90 elbow
pass-through,
technopolymer
R 21
hose O.D.
[mm]
FOX series
MW-2L22001
MW-2L22003
MW-2L22004
-
R 25
code
FOX series
MW-2L25001
MW-2L25002
MW-2L25003
MW-2L25004
MW-2L25005
MW-2L25008
MW-2L25009
hose O.D.
[mm]
thread size
4
4
4
6
6
8
8
M5
M7
1/8
1/8
1/4
1/4
3/8

code
R series
MW-2012102
MW-2012104
MW-2012106
MW-2012107
MW-2012108
MW-2012109
MW-2012110
MW-2012111
MW-2012112
MW-2012113
MW-2012114
MW-2012115
BANJO straight
body fitting,
technopolymer
Rotary 90 elbow,
male parallel thread,
brass
R 28
R 31
hose O.D.
[mm]
thread size
4
5
6
6
8
8
8
10
10
12
12
12
1/8
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/4
3/8
1/2
BANJO tee body,

technopolymer
code
R series
MW-2031004
MW-2031005
MW-2031006
MW-2031015
MW-2031016
MW-2031017
MW-2031018
MW-2031019
FOX series
MW-2L31001
MW-2L31002
MW-2L31003
MW-2L31007
MW-2L31008
MW-2L31009
MW-2L31010
MW-2L31011
MW-2L31012
MW-2L31013
MW-2L31014
-
R 29
code
R series
MW-2013102
MW-2013104
MW-2013106
MW-2013107
MW-2013108
MW-2013109
MW-2013110
MW-2013111
MW-2013112
MW-2013113
MW-2013114
MW-2013115
hose O.D.
[mm]
thread size
4
5
6
6
8
8
8
10
10
12
12
12
1/8
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/4
3/8
1/2
Disassembly tool
hose O.D.
[mm]
thread
size
4
4
4
5
5
5
6
6
6
8
8
8
10
10
10
12
12
12
14
M5
1/8
1/4
M5
1/8
1/4
M5
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
1/4
3/8
1/2
1/2
Rotary 90 elbow,
male conical thread, brass
R 31C
code
R series
MW-2031C015
MW-2031C016
FOX series
MW-2L31C02
MW-2L31C03
MW-2L31C08
MW-2L31C09
MW-2L31C10
MW-2L31C11
MW-2L31C12
MW-2L31C13
MW-2L31C14
-
hose O.D.
[mm]
thread
size
4
4
6
6
8
8
8
10
10
12
12
1/8
1/4
1/8
1/4
1/8
1/4
3/8
1/4
3/8
3/8
1/2
R 17
code
hose O.D.
[mm]
application
MW-2L17001
MW-2017001
3 10
4 14
for R and FOX fittings

only R fittings
983

Rotary tee,
male parallel thread,
brass
Rotary 90 elbow,
female thread,
technopolymer
R 32
R 34/F
code
R series
MW-2032005
MW-2032017
MW-2032018
MW-2032019
FOX series
MW-2L32002
MW-2L32003
MW-2L32008
MW-2L32009
MW-2L32010
MW-2L32011
MW-2L32012
MW-2L32013
MW-2L32014
-
hose O.D.
[mm]
thread
size
4
4
5
6
6
8
8
8
10
10
12
12
14
1/8
1/4
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
3/8
1/2
1/2
code
FOX series
MW-2L34F01
MW-2L34F06
MW-2L34F07
MW-2L34F08
MW-2L34F09
MW-2L34F10
hose O.D.
[mm]
thread
size
4
6
6
6
8
8
M5
M5
1/8
1/4
1/8
1/4
Rotary tee,
male thread,
technopolymer
Rotary tee,
male conical thread,
technopolymer
R 32C
code
FOX series
MW-2L32C02
MW-2L32C03
MW-2L32C08
MW-2L32C09
MW-2L32C10
MW-2L32C11
MW-2L32C12
MW-2L32C13
MW-2L32C14
code
FOX series
MW-2L34001
MW-2L34006
MW-2L34007
MW-2L34008
MW-2L34009
MW-2L34010
984
hose O.D.
[mm]
thread
size
4
4
6
6
8
8
8
10
10
1/8
1/4
1/8
1/4
1/8
1/4
3/8
1/4
3/8
R 35
code
FOX series
MW-2L35001
MW-2L35002
MW-2L35003
MW-2L35006
MW-2L35007
MW-2L35008
MW-2L35009
MW-2L35010
MW-2L35011
hose O.D.
[mm]
thread
size
4
4
4
6
6
6
8
8
8
M5
1/8
1/4
M5
1/8
1/4
1/8
1/4
3/8
Rotary 90 elbow,
male thread,
technopolymer
Rotary tee,
female thread,
technopolymer
R 34
R 35/F
hose O.D.
[mm]
thread
size
4
6
6
6
8
8
M5
M5
1/8
1/4
1/8
1/4
code
FOX series
MW-2L35F01
MW-2L35F06
MW-2L35F07
MW-2L35F08
MW-2L35F09
MW-2L35F10
hose O.D.
[mm]
thread
size
4
6
6
6
8
8
M5
M5
1/8
1/4
1/8
1/4

code
FOX series
MW-2L36001
MW-2L36020
MW-2L36002
MW-2L36006
MW-2L36021
MW-2L36007
MW-2L36008
MW-2L36009
MW-2L36010
Extended rotary 90 elbow,

male thread,
technopolymer
Rotary 90 elbow,
male conical thread,
brass
R 36
R 39C
hose O.D.
[mm]
thread
size
4
4
4
6
6
6
6
8
8
M5
M7
1/8
M5
M7
1/8
1/4
1/8
1/4
code
R series
MW-2039Z07
MW-2039Z08
FOX series
MW-2L39C02
MW-2L39C08
MW-2L39C09
MW-2L39C10
MW-2L39C11
MW-2L39C13
-
hose O.D.
[mm]
thread
size
4
6
6
8
8
10
6
6
1/8
1/8
1/4
1/8
1/4
1/4
M12x1
M12x1.25
Cross, brass
Extended rotary tee,

male thread, technopolymer
R 40
code
R 37
code
FOX series
MW-2L37001
MW-2L37020
MW-2L37002
MW-2L37006
MW-2L37007
MW-2L37008
MW-2L37009
MW-2L37010
hose O.D.
[mm]
thread
size
4
4
4
6
6
6
8
8
M5
M7
1/8
M5
1/8
1/4
1/8
1/4
hose O.D.
[mm]
FOX series
MW-2L40003
MW-2L40004
6
8
Divider,
technopolymer
R 42
code
Lateral rotary tee,

male thread, brass
FOX series
MW-2L42001
MW-2L42002
MW-2L42004
MW-2L42005
hose O.D. 1
[mm]
hose O.D. 2
[mm]
4
4
6
6
4
6
6
8
Divider,
male thread.
technopolymer
R 38
code
R series
MW-2038015
MW-2038016
FOX series
MW-2L38002
MW-2L38008
MW-2L38009
MW-2L38010
MW-2L38011
MW-2L38013
MW-2L38014
-
hose O.D.
[mm]
thread
size
4
6
6
8
8
10
10
12
12
1/8
1/8
1/4
1/8
1/4
1/4
3/8
3/8
1/2
R 43
code
FOX series
MW-2L43001
MW-2L43002
MW-2L43003
MW-2L43008
MW-2L43009
hose O.D.
[mm]
thread
size
4
4
4
6
6
M5
1/8
1/4
1/8
1/4
985

Divider,
technopolymer
90 elbow
with stem,
technopolymer
R 44
R 48
1
2
code
FOX series
MW-2L44001
MW-2L44003
hose O.D. 1
[mm]
hose O.D. 2
[mm]
6
8
4
6
code
FOX series
MW-2L48001
MW-2L48002
MW-2L48003
MW-2L48004
hose O.D.
[mm]
stem O.D
[mm]
4
6
8
10
4
6
8
10
Divider,
male thread,
technopolymer
R 45
2
code
FOX series
MW-2L45001
MW-2L45002
MW-2L45007
MW-2L45008
MW-2L45009
hose O.D. 1
[mm]
hose O.D. 2
[mm]
thread
size
6
6
8
8
8
4
4
6
6
6
1/8
1/4
1/8
1/4
3/8
90 elbow with stem,

technopolymer
Dual rotary union,

brass
R 50
code
R series
MW-2033002
-
FOX series
MW-2L50001
MW-2L50002
MW-2L50007
MW-2L50008
MW-2L50009
MW-2L50010
MW-2L50011
MW-2L50013
hose O.D.
[mm]
thread
size
4
4
5
6
6
6
8
8
10
M5
1/8
1/8
M5
1/8
1/4
1/8
1/4
1/4
R 46
code
FOX series
MW-2L46001
MW-2L46002
MW-2L46003
hose O.D.
[mm]
stem O.D
[mm]
4
6
8
4
6
8
Extended 90 elbow
with stem,
technopolymer
R 47
code
FOX series
MW-2L47001
MW-2L47002
MW-2L47003
986
hose O.D.
[mm]
stem O.D
[mm]
4
6
8
4
6
8
Dual rotary union,

brass
R 51
code
FOX series
MW-2L51001
MW-2L51002
MW-2L51007
MW-2L51008
MW-2L51009
MW-2L51010
MW-2L51011
MW-2L51013
hose O.D.
[mm]
thread
size
4
4
6
6
6
8
8
10
M5
1/8
M5
1/8
1/4
1/8
1/4
1/4

code
FOX series
MW-2L52002
MW-2L52008
MW-2L52009
MW-2L52010
MW-2L52011
MW-2L52013
code
FOX series
MW-2L53002
MW-2L53008
MW-2L53009
MW-2L53010
MW-2L53011
MW-2L53013
code
FOX series
MW-2L54001
MW-2L54002
MW-2L54007
MW-2L54008
MW-2L54009
MW-2L54010
MW-2L54011
MW-2L54012
MW-2L54013
MW-2L54014
Triple rotary union,

brass
BANJO fitting,
brass
R 52
R 55
hose O.D.
[mm]
thread size
4
6
6
8
8
10
1/8
1/8
1/4
1/8
1/4
1/4
code
FOX series
MW-2L55001
MW-2L55002
MW-2L55007
MW-2L55008
MW-2L55009
MW-2L55010
MW-2L55011
MW-2L55012
MW-2L55013
MW-2L55014
hose O.D.
[mm]
thread size
4
4
6
6
6
8
8
8
10
10
M5
1/8
M5
1/8
1/4
1/8
1/4
3/8
1/4
3/8
Triple rotary union,

brass
BANJO fitting,
brass
R 53
R 56
hose O.D.
[mm]
thread size
4
6
6
8
8
10
1/8
1/8
1/4
1/8
1/4
1/4
code
FOX series
MW-2L56001
MW-2L56002
MW-2L56007
MW-2L56008
MW-2L56009
MW-2L56010
MW-2L56011
MW-2L56012
MW-2L56013
MW-2L56014
hose O.D.
[mm]
thread size
4
4
6
6
6
8
8
8
10
10
M5
1/8
M5
1/8
1/4
1/8
1/4
3/8
1/4
3/8
BANJO fitting,
brass
BANJO fitting,
brass
R 54
R 57
hose O.D.
[mm]
thread size
4
4
6
6
6
8
8
8
10
10
M5
1/8
M5
1/8
1/4
1/8
1/4
3/8
1/4
3/8
code
FOX series
MW-2L57001
MW-2L57002
MW-2L57007
MW-2L57008
MW-2L57009
MW-2L57010
MW-2L57011
MW-2L57012
MW-2L57013
MW-2L57014
hose O.D.
[mm]
thread size
4
4
6
6
6
8
8
8
10
10
M5
1/8
M5
1/8
1/4
1/8
1/4
3/8
1/4
3/8
987

Push-in fittings for the food industry - F series
Material:
Working press.:
Working temp.:
Seal:
Nickel-plated brass
16 bar
Viton
F series fittings are designed for food industry. There

is no technopolymer in the fitting, parts are chemically
treated with nickel-plated coating, seals are made of
Viton. As a result, they are highly resistant to detergents
and other chemicals. Their working temperature ranges
up to +150C. The fittings can be also used in chemical,
pharmaceutical, electronic industry and in medicine.
Construction:
1
2
3
4
Body:
chemically nickel-plated brass
Gripper:
chemically nickel-plated brass
Fitting seal: Viton
Thread seal: Viton
R 1 NSF
code
hose
O.D.
MW-2F01001
MW-2F01002
MW-2F01003
MW-2F01000
MW-2F01007
MW-2F01008
MW-2F01009
MW-2F01010
MW-2F01011
MW-2F01012
MW-2F01013
MW-2F01022
4
4
4
6
6
6
8
8
8
10
10
10
male
thread
size
M5
1/8
1/4
M5
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
R 1C NSF
code
hose
O.D.
MW-2F01C02
MW-2F01C07
MW-2F01C08
MW-2F01C09
MW-2F01C10
MW-2F01C11
MW-2F01C13
MW-2F01C14
4
6
6
8
8
8
10
10
male
thread
size
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
R 2 NSF
code
hose
O.D.
MW-2F02001
MW-2F02005
MW-2F02006
MW-2F02007
MW-2F02008
MW-2F02011
4
6
6
8
8
10
R 3 NSF
988
code
hose
O.D.
MW-2F03001
MW-2F03003
MW-2F03004
MW-2F03005
4
6
8
10
male
thread
size
M13x1
M15x1
M17x1
M20x1
female
thread
size
1/8
1/8
1/4
1/8
1/4
1/4
R 4 NSF
code
hose
O.D.
MW-2F04001
MW-2F04003
MW-2F04004
MW-2F04005
4
6
8
10

Push-in fittings for the food industry - F series
R 31 NSF
R 5 NSF
code
hose
O.D.
MW-2F05001
MW-2F05003
MW-2F05004
MW-2F05005
4
6
8
10
R 6 NSF
code
fitting
diameter
MW-2F06001
MW-2F06002
MW-2F06003
MW-2F06000
MW-2F06007
MW-2F06008
MW-2F06009
MW-2F06010
MW-2F06011
MW-2F06012
MW-2F06013
4
4
4
6
6
6
8
8
8
10
10
male
thread
size
M5
1/8
1/4
M5
1/8
1/4
1/8
1/4
3/8
1/4
3/8
code
hose
O.D.
MW-2F31001
MW-2F31002
MW-2F31003
MW-2F31007
MW-2F31008
MW-2F31009
MW-2F31010
MW-2F31011
MW-2F31012
MW-2F31013
MW-2F31014
MW-2F31015
4
4
4
6
6
6
8
8
8
10
10
10
male
thread
size
M5
1/8
1/4
M5
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
R 32 NSF
code
hose
O.D.
MW-2F32002
MW-2F32008
MW-2F32009
MW-2F32010
MW-2F32011
MW-2F32012
MW-2F32013
MW-2F32014
4
6
6
8
8
8
10
10
R 38 NSF
R 31C NSF
code
hose
O.D.
MW-2F31C02
MW-2F31C03
MW-2F31C08
MW-2F31C09
MW-2F31C10
MW-2F31C11
MW-2F31C12
MW-2F31C13
MW-2F31C14
4
4
6
6
8
8
8
10
10
male
thread
size
1/8
1/4
1/8
1/4
1/8
1/4
3/8
1/4
3/8
code
hose
O.D.
MW-2F38002
MW-2F38008
MW-2F38009
MW-2F38010
MW-2F38011
MW-2F38013
MW-2F38014
4
6
6
8
8
10
10
code
MW-2F11001
MW-2F11003
MW-2F11004
MW-2F11005
4
6
8
10
male
thread
size
M11x1
M13x1
M15x1
M17x1
male
thread
size
1/8
1/8
1/4
1/8
1/4
1/4
3/8
R 39 NSF
R 10 NSF
hose
O.D.
male
thread
size
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
code
hose
O.D.
MW-2F39C02
MW-2F39C08
MW-2F39C09
MW-2F39C10
MW-2F39C11
MW-2F39C12
MW-2F39C13
4
6
6
8
8
8
10
male
thread
size
1/8
1/8
1/4
1/8
1/4
3/8
1/4
989

Stainless steel push-in fittings
Material:
Working press.:
Vacuum press:
Working temp.:
Seal:
AISI 316L
15 bar
0,99 bar
Viton
High quality push-in fittings made entirely of AISI 316L

steel. Viton seals and lack of plastic elements ensure outstanding corrosion and chemical resistance. Widely used
in chemical, food, pharmaceutical, electronic industry and
in medicine.
Construction:
3
4
1
1
2
3
4
5
6
7
Body:
Release bushing:
Locking bushing:
Safety locking ring:
Protecting ring:
Hose seal:
Thread seal:
60000
code
hose
O.D.
AI-60000-04-02
AI-60000-04-04
AI-60000-06-02
AI-60000-06-04
AI-60000-08-02
AI-60000-08-04
AI-60000-10-04
AI-60000-10-06
AI-60000-12-06
AI-60000-12-08
4
4
6
6
8
8
10
10
12
12
990
male
thread
size
1/8
1/4
1/8
1/4
1/8
1/4
1/4
3/8
3/8
1/2
AISI 316L
AISI 316L
AISI 316L
AISI 316L
PTFE
Viton
Viton
60110
60020
code
hose
O.D.
AI-60020-04-M5
AI-60020-04-02
AI-60020-04-04
AI-60020-06-02
AI-60020-06-04
AI-60020-08-02
AI-60020-08-04
AI-60020-10-04
AI-60020-10-06
AI-60020-12-06
AI-60020-12-08
4
4
4
6
6
8
8
10
10
12
12
male
thread
size
M5
1/8
1/4
1/8
1/4
1/8
1/4
1/4
3/8
3/8
1/2
code
hose
O.D.
AI-60110-04-02
AI-60110-04-04
AI-60110-06-02
AI-60110-06-04
AI-60110-08-02
AI-60110-08-04
AI-60110-10-04
AI-60110-10-06
AI-60110-12-06
AI-60110-12-08
4
4
6
6
8
8
10
10
12
12
male
thread
size
1/8
1/4
1/8
1/4
1/8
1/4
1/4
3/8
3/8
1/2

Stainless steel push-in fittings
60115
code
hose
O.D.
AI-60115-04-M5
AI-60115-04-02
AI-60115-04-04
AI-60115-06-02
AI-60115-06-04
AI-60115-08-02
AI-60115-08-04
AI-60115-10-04
AI-60115-10-06
AI-60115-12-06
AI-60115-12-08
4
4
4
6
6
8
8
10
10
12
12
male
thread
size
M5
1/8
1/4
1/8
1/4
1/8
1/4
1/4
3/8
3/8
1/2
60210
code
hose
O.D.
AI-60210-04-02
AI-60210-04-04
AI-60210-06-02
AI-60210-06-04
AI-60210-08-02
AI-60210-08-04
AI-60210-10-04
AI-60210-10-06
AI-60210-12-06
AI-60210-12-08
4
4
6
6
8
8
10
10
12
12
60040
male
thread
size
1/8
1/4
1/8
1/4
1/8
1/4
1/4
3/8
3/8
1/2
60215
code
hose
O.D.
AI-60215-04-M5
AI-60215-04-02
AI-60215-04-04
AI-60215-06-02
AI-60215-06-04
AI-60215-08-02
AI-60215-08-04
AI-60215-10-04
AI-60215-10-06
AI-60215-12-06
AI-60215-12-08
4
4
4
6
6
8
8
10
10
12
12
60130
male
thread
size
M5
1/8
1/4
1/8
1/4
1/8
1/4
1/4
3/8
3/8
1/2
60230
code
hose
O.D.
length
[mm]
code
hose
O.D.
length
[mm]
code
hose
O.D.
length
[mm]
AI-60040-04
AI-60040-06
AI-60040-08
AI-60040-10
AI-60040-12
4
6
8
10
12
31
35
36,5
42
48
AI-60130-04
AI-60130-06
AI-60130-08
AI-60130-10
AI-60130-12
4
6
8
10
12
18
21
22,5
26
30,5
AI-60230-04
AI-60230-06
AI-60230-08
AI-60230-10
AI-60230-12
4
6
8
10
12
36
42
45
52
61
60050
code
hose
O.D.
length
[mm]
AI-60050-04
AI-60050-06
AI-60050-08
AI-60050-10
AI-60050-12
4
6
8
10
12
31
35
37
42
48
991

Threaded fittings - A series
Material:
Nickel-plated brass
Threaded fittings (A series) are designed to connect different types of pneumatic elements (including hoses). In order
to get a tight connection, additional sealing must be most
often applied. It is usually PTFE tape or sealant (conical
thread) or aluminium/ copper washers (parallel threads).
Some fittings are equipped with NBR O-rings.
code
MW-2101A00
MW-2101000
MW-2101001
MW-2101002
MW-2101003
MW-2101004
MW-2101005
MW-2101006
MW-2101007
MW-2101008
MW-2101009
MW-2101010
MW-2101011
male
thread
size
M5
M5
1/8
1/8
1/8
1/4
1/4
1/4
3/8
3/8
1/2
1/2
3/4
male
thread
size
M5
1/8
1/8
1/4
3/8
1/4
3/8
1/2
3/8
1/2
1/2
3/4
3/4
code
female thread
size
MW-2103000
MW-2103001
MW-2103002
MW-2103003
MW-2103004
M5
1/8
1/4
3/8
1/2
code
MW-2102001
MW-2102002
MW-2102003
MW-2102004
MW-2102005
MW-2102006
MW-2102007
MW-2102008
MW-2102009
MW-2102010
MW-2102011
992
male
thread
size
1/8
1/8
1/8
1/4
1/4
1/4
3/8
3/8
1/2
1/2
3/4
male
thread
size
1/8
1/4
3/8
1/4
3/8
1/2
3/8
1/2
1/2
3/4
3/4
code
MW-2105001
MW-2105002
MW-2105003
MW-2105004
MW-2105005
MW-2105006
MW-2105007
male
thread
size
1/8
1/8
1/4
1/4
3/8
3/8
1/2
female
thread
size
1/8
1/4
1/4
3/8
3/8
1/2
1/2
A4
code
A2
A5
A3
A1
MW-2104001
MW-2104002
MW-2104003
MW-2104004
MW-2104005
MW-2104006
male
thread
size
1/4
3/8
3/8
1/2
1/2
3/4
female
thread
size
1/8
1/8
1/4
1/4
3/8
1/2
A6
code
MW-2106001
MW-2106002
MW-2106003
MW-2106004
MW-2106005
A 4/Z
code
MW-2151000
MW-2151001
MW-2151002
MW-2151003
MW-2151004
MW-2151005
male
thread
size
1/8
1/4
3/8
3/8
1/2
1/2
female
thread
size
M5
1/8
1/8
1/4
1/4
3/8
female
thread
size
1/8
1/8
1/4
1/4
3/8
female
thread
size
1/4
3/8
3/8
1/2
1/2
A7
code
male thread
size
MW-2107000
MW-2107001
MW-2107002
MW-2107003
MW-2107004
M5
1/8
1/4
3/8
1/2

code
MW-2152001
MW-2152002
MW-2152003
MW-2152004
MW-2152005
MW-2152006
MW-2152007
MW-2152008
female
thread
size
1/8
1/8
1/4
1/4
3/8
3/8
1/2
1/2
A 15
A 11
A 5/Z
male
thread
size
M5
1/8
1/8
1/4
1/4
3/8
3/8
1/2
code
female thread
size
code
male thread
size
MW-2111001
MW-2111002
MW-2111003
MW-2111004
1/8
1/4
3/8
1/2
MW-2115001
MW-2115002
MW-2115003
MW-2115004
1/8
1/4
3/8
1/2
A 16
A 12
A8
code
female thread
size
MW-2108001
MW-2108002
MW-2108003
MW-2108004
1/8
1/4
3/8
1/2
code
MW-2112001
MW-2112002
MW-2112003
MW-2112004
male
thread
size
1/8
1/4
3/8
1/2
female
thread
size
1/8
1/4
3/8
1/2
code
male thread
size
MW-2116001
MW-2116002
MW-2116003
MW-2116004
1/8
1/4
3/8
1/2
A 17
A 13
A9
code
female thread
size
MW-2109001
MW-2109002
MW-2109003
MW-2109004
1/8
1/4
3/8
1/2
code
MW-2113001
MW-2113002
MW-2113003
MW-2113004
male
thread
size
1/8
1/4
3/8
1/2
female
thread
size
1/8
1/4
3/8
1/2
code
MW-2117001
MW-2117002
MW-2117003
MW-2117004
male
thread
size
1/4
1/8
3/8
1/2
A 14
A 10
code
MW-2110001
MW-2110002
MW-2110003
MW-2110004
male
thread
size
1/8
1/4
3/8
1/2
female
thread
size
1/8
1/4
3/8
1/2
code
female thread
size
MW-2114001
MW-2114002
MW-2114003
1/8
1/4
3/8
female
thread
size
1/4
1/8
3/8
1/2
A 18
code
MW-2118000
MW-2118001
MW-2118002
MW-2118003
male
thread
size
1/8
1/4
3/8
1/2
female
thread
size
1/8
1/4
3/8
1/2
993

A 19
code
MW-2119001
MW-2119002
MW-2119003
MW-2119004
MW-2119005
MW-2119006
MW-2119007
MW-2119008
MW-2119009
MW-2119010
MW-2119011
fitting
diameter
[mm]
7
7
8
9
9
9
12
12
12
17
17
male
thread
size
1/8
1/4
1/8
1/8
1/4
3/8
1/4
3/8
1/2
3/8
1/2
A 21
code
female thread
size
code
female thread
size
MW-2121001
MW-2121002
MW-2121003
MW-2121004
1/8
1/4
3/8
1/2
MW-2124001
MW-2124002
MW-2124003
MW-2124004
1/8
1/4
3/8
1/2
- max. pressure 13 bar

- max. temperature +50C
A 25
A 23
A 20
code
MW-2120001
MW-2120002
994
male
thread
size
1/8
1/4
female
thread
size
1/8
1/4
A 24
code
female thread
size
MW-2123001
MW-2123002
MW-2123003
MW-2123004
1/8
1/4
3/8
1/2
code
MW-2150003
MW-2150004
MW-2150005
MW-2150006
MW-2150007
female
thread
size
1/8
1/8
1/8
1/4
1/4
length
[mm]
22
42
51
35
51

Stainless steel threaded fittings
Material:
AISI 316L
Nipple, BSPT male thread
Reducing nipple, BSPT male thread

1
2
62000
code
thread
size
[inch]
length
[mm]
spanner
size
[mm]
AI-62000-02
AI-62000-04
AI-62000-06
AI-62000-08
AI-62000-12
1/8
1/4
3/8
1/2
3/4
19,5
27
28
33,5
40
11
14
17
22
27
Reducing adaptor, BSPT male / female thread
62020
code
thread
size 1
[inch]
thread
size 2
[inch]
length
[mm]
spanner
size
[mm]
AI-62020-02-04
AI-62020-02-06
AI-62020-04-06
AI-62020-04-08
AI-62020-06-08
AI-62020-08-12
1/8
1/8
1/4
1/4
3/8
1/2
1/4
3/8
3/8
1/2
1/2
3/4
23,5
24
27,5
30,5
31
37,5
14
17
17
22
22
27
Reducing adaptor, BSPT female / male thread

1
62080
62040
code
thread
size 1
[inch]
thread
size 2
[inch]
length
[mm]
spanner
size
[mm]
AI-62040-02-04
AI-62040-04-06
AI-62040-04-08
AI-62040-06-08
AI-62040-08-12
1/8
1/4
1/4
3/8
1/2
1/4
3/8
1/2
1/2
3/4
22
27
30
30,5
35
17
22
24
24
32
code
thread
size 1
[inch]
thread
size 2
[inch]
length
[mm]
spanner
size
[mm]
AI-62080-04-02
AI-62080-06-02
AI-62080-06-04
AI-62080-08-04
AI-62080-08-06
AI-62080-12-08
1/4
3/8
3/8
1/2
1/2
3/4
1/8
1/8
1/4
1/4
3/8
1/2
16
16,5
16,5
19,5
19,5
23,5
14
17
17
22
22
27
Reducing adaptor
Adaptor
1
2
62300
code
thread
size
[inch]
length
[mm]
spanner
size
[mm]
AI-62300-02
AI-62300-04
AI-62300-06
AI-62300-08
AI-62300-12
1/8
1/4
3/8
1/2
3/4
15
22
24
30
32
14
17
22
27
32
62310
code
thread
size 1
[inch]
thread
size 2
[inch]
length
[mm]
spanner
size
[mm]
AI-62310-02-04
AI-62310-04-06
AI-62310-06-08
AI-62310-08-12
1/8
1/4
3/8
1/2
1/4
3/8
1/2
3/4
19
23
27,5
30
17
22
24
30
995

Stainless steel threaded fittings
Material:
AISI 316L
Blank plug (hexagonal), BSP male thread
Tee
62320
code
thread
size
[inch]
length
[mm]
spanner
size
[mm]
AI-62320-02
AI-62320-04
AI-62320-06
AI-62320-08
AI-62320-12
1/8
1/4
3/8
1/2
3/4
10
13
13,5
14,5
16
14
17
19
24
30
Tee
62400
code
thread size
[inch]
spanner size
[mm]
AI-62400-02
AI-62400-04
AI-62400-06
AI-62400-08
1/8
1/4
3/8
1/2
12
12
15
20
Tee
62440
62450
code
thread size
[inch]
spanner size
[mm]
code
thread size
[inch]
spanner size
[mm]
AI-62440-02
AI-62440-04
AI-62440-06
AI-62440-08
1/8
1/4
3/8
1/2
12
12
15
20
AI-62450-02
AI-62450-04
AI-62450-06
AI-62450-08
1/8
1/4
3/8
1/2
12
12
15
20
90 elbow
90 elbow
62510
62520
code
thread size
[inch]
spanner size
[mm]
code
thread size
[inch]
spanner size
[mm]
AI-62510-02
AI-62510-04
AI-62510-06
AI-62510-08
1/8
1/4
3/8
1/2
12
12
15
20
AI-62520-02
AI-62520-04
AI-62520-06
AI-62520-08
1/8
1/4
3/8
1/2
12
12
15
20
996

Fittings with cutting ring - B series
Material:
Nickel-plated brass
Fittings with a cutting ring are designed to connect copper
pipes and hoses made of plastic. It is recommended to use
an internal bush (B 12) if the fitting connects with the hose.
B1
code
hose
O.D. / I.D.
MW-2201001
MW-2201002
MW-2201003
MW-2201004
MW-2201005
MW-2201006
MW-2201007
MW-2201008
MW-2201009
MW-2201010
MW-2201011
MW-2201012
4/2
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
12/10
12/10
15/12
male
thread
size
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
3/8
1/2
1/2
B2
code
hose
O.D. / I.D.
MW-2202001
MW-2202002
MW-2202003
MW-2202004
MW-2202005
MW-2202006
MW-2202007
MW-2202008
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
female
thread
size
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
B3
code
hose
O.D. / I.D.
MW-2203001
MW-2203002
MW-2203003
MW-2203004
MW-2203005
MW-2203006
4/2
6/4
8/6
10/8
12/10
15/12
B4
code
hose
O.D. / I.D.
MW-2204001
MW-2204002
MW-2204003
MW-2204004
MW-2204005
6/4
8/6
10/8
12/10
15/12
B6
code
hose
O.D. / I.D.
MW-2206001
MW-2206002
MW-2206003
MW-2206004
MW-2206005
MW-2206006
4/2
6/4
8/6
10/8
12/10
15/12
B5
code
hose
O.D. / I.D.
MW-2205001
MW-2205002
MW-2205003
MW-2205004
MW-2205005
MW-2205006
MW-2205007
MW-2205008
MW-2205009
MW-2205010
MW-2205011
MW-2205012
4/2
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
12/10
12/10
15/12
male
thread
size
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
3/8
1/2
1/2
B7
code
hose
O.D. / I.D.
MW-2207001
MW-2207002
MW-2207003
MW-2207004
MW-2207005
MW-2207006
MW-2207007
MW-2207008
MW-2207010
MW-2207011
MW-2207012
4/2
6/4
6/4
8/6
8/6
8/6
10/8
10/8
12/10
12/10
15/12
male
thread
size
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
3/8
1/2
1/2
997

Fittings with cutting ring - B series
B9
B8
code
hose
O.D. / I.D.
MW-2208000
MW-2208001
MW-2208002
MW-2208003
MW-2208004
MW-2208005
MW-2208006
MW-2208007
MW-2208009
MW-2208010
MW-2208011
4/2
6/4
6/4
8/6
8/6
8/6
10/8
10/8
12/10
12/10
15/12
male
thread
size
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
3/8
1/2
1/2
B 10
code
hose
O.D. / I.D.
code
hose
O.D. / I.D.
thread
size
MW-2209001
MW-2209002
MW-2209003
MW-2209004
MW-2209005
MW-2209006
4/2
6/4
8/6
10/8
12/10
15/12
MW-2210001
MW-2210002
MW-2210003
MW-2210004
MW-2210005
MW-2210006
4/2
6/4
8/6
10/8
12/10
15/12
M8x1
M10x1
M12x1
M16x1,5
M18x1.5
M22x1.5
B 11
998
code
hose
O.D. / I.D.
MW-2211001
MW-2211002
MW-2211003
MW-2211004
MW-2211005
MW-2211006
4/2
6/4
8/6
10/8
12/10
15/12
B 12
code
hose
O.D. / I.D.
MW-2212001
MW-2212002
MW-2212003
MW-2212004
MW-2212005
6/4
8/6
10/8
12/10
15/12

Tubular fittings - C series
Material:
Nickel-plated brass
Tubular fittings are designed to connect hoses made of soft
plastic materials. To assemble the fitting, the hose must
be pushed onto the fitting and tightened up with the nut.
C1
code
hose
O.D. / I.D.
MW-2301017
MW-2301001
MW-2301002
MW-2301003
MW-2301004
MW-2301005
MW-2301020
MW-2301006
MW-2301007
MW-2301008
MW-2301009
MW-2301010
MW-2301015
5/3
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
10/8
12/10
12/10
15/12,5
male
thread
size
1/8
1/8
1/4
1/8
1/4
3/8
1/8
1/4
3/8
1/2
3/8
1/2
1/2
C 1/Z
code
hose
O.D. / I.D.
MW-2351001
MW-2351002
MW-2351003
MW-2351004
MW-2351005
MW-2351006
MW-2351007
MW-2351008
MW-2351009
MW-2351010
MW-2351011
MW-2351012
4/2
6/4
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
12/10
12/10
male
thread
size
M5
M5
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
3/8
1/2
C4
C 1/C
code
hose
O.D. / I.D.
MW-2356001
MW-2356002
MW-2356003
MW-2356004
MW-2356005
5/3
6/4
6/4
6/4
8/6
male
thread
size
M5
M6
M12x1,5
3/8
M12x1,5
code
hose
O.D. / I.D.
MW-2304001
MW-2304002
MW-2304003
MW-2304004
6/4
8/6
10/8
12/10
C2
code
hose
O.D. / I.D.
MW-2302001
MW-2302002
MW-2302003
MW-2302004
MW-2302005
MW-2302006
MW-2302007
MW-2302008
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
female
thread
size
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
C5
code.
hose
O.D. / I.D.
MW-2305016
MW-2305001
MW-2305002
MW-2305003
MW-2305004
MW-2305005
MW-2305006
MW-2305007
MW-2305008
MW-2305009
MW-2305010
MW-2305017
5/3
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
12/10
12/10
15/12,5
male
thread
size
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
3/8
1/2
1/2
C3
code
hose
O.D. / I.D.
MW-2303001
MW-2303002
MW-2303003
MW-2303004
6/4
8/6
10/8
12/10
999

Tubular fittings - C series
C 5/F
code
hose
O.D. / I.D.
MW-2352001
MW-2352002
6/4
8/6
female
thread
size
1/8
1/4
C 5/C
code
hose
O.D. / I.D.
MW-2357001
MW-2357002
6/4
8/6
male
thread
size
M12x1,5
M12x1,5
C7
code
hose
O.D. / I.D.
MW-2307015
MW-2307001
MW-2307002
MW-2307003
MW-2307004
MW-2307005
MW-2307006
MW-2307007
MW-2307008
MW-2307009
MW-2307010
MW-2307016
5/3
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
12/10
12/10
15/12,5
male
thread
size
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
3/8
1/2
1/2
C8
C6
code
hose
O.D. / I.D.
MW-2306001
MW-2306002
MW-2306003
MW-2306004
MW-2306006
6/4
8/6
10/8
12/10
15/12,5
1000
code
hose
O.D. / I.D.
MW-2308012
MW-2308001
MW-2308002
MW-2308003
MW-2308004
MW-2308005
MW-2308006
MW-2308007
MW-2308008
MW-2308009
MW-2308010
5/3
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
12/10
12/10
male
thread
size
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
3/8
1/2
C9
code
hose
O.D. / I.D.
MW-2309001
MW-2309002
MW-2309003
MW-2309004
MW-2309007
6/4
8/6
10/8
12/10
15/12,5
C 10
code
hose
O.D. / I.D.
MW-2310001
MW-2310009
MW-2310002
MW-2310003
MW-2310004
MW-2310005
MW-2310006
MW-2310011
4/2
5/3
6/4
6/4
8/6
10/8
12/10
15/12,5
female
thread
size
M7x0,5
M7x0,5
M8x0,5
M10x1
M12x1
M14x1
M16x1
M20x1
C 11
code
hose
O.D. / I.D.
MW-2311001
MW-2311002
MW-2311003
6/4
8/6
10/8

BANJO fittings - D series
Material:
Nickel-plated brass
BANJO fittings enable connection in any required position.
D series includes: fittings with cutting rings (D 17), female
threads (D 12), tubular ends (D 5, D 6) and BANJO passing through bolts. Bolts can also be used for connection of
BANJO fittings from R series (R 13, R 14, R 28 and R 29).
D5
code
hose
O.D. / I.D.
bolt
hole
MW-2405000
MW-2405013
MW-2405018
MW-2405001
MW-2405002
MW-2405003
MW-2405005
MW-2405006
MW-2405007
MW-2405008
MW-2405009
MW-2405010
MW-2405011
MW-2405017
MW-2405012
4/2
5/3
5/3
6/4
6/4
6/4
8/6
8/6
8/6
8/6
10/8
10/8
10/8
12/10
12/10
M5
1/8
M5
M5
1/8
1/4
1/8
1/4
3/8
1/2
1/4
3/8
1/2
3/8
1/2
male
thread
size
with washer (R13, R14, D12, D17, D5, D6)
MW-2407001
M5
MW-2407002
1/8
MW-2407003
1/4
MW-2407004
3/8
MW-2407005
1/2
MW-2407006
M12x1,5
with O-ring (R28, R29)
MW-2407102
1/8
MW-2407103
1/4
MW-2407104
3/8
code
D8
male
thread
size
MW-2408001
1/8
MW-2408002
1/4
MW-2408003
3/8
MW-2408004
1/2
MW-2408102
1/8
MW-2408103
1/4
MW-2408104
3/8
code
D6
code
hose
O.D. / I.D.
bolt
hole
MW-2406013
MW-2406001
MW-2406002
MW-2406004
MW-2406005
MW-2406006
MW-2406008
MW-2406009
MW-2406010
MW-2406011
5/3
6/4
6/4
8/6
8/6
8/6
10/8
10/8
10/8
12/10
1/8
1/8
1/4
1/8
1/4
3/8
1/4
3/8
1/2
1/2
D9
D7
male
female
thread
thread
size
size
MW-2409001
1/8
1/8
MW-2409002
1/4
1/4
MW-2409003
3/8
3/8
MW-2409004
1/2
1/2
MW-2409102
1/8
1/8
MW-2409103
1/4
1/4
MW-2409104
3/8
3/8
code
D 10
male
thread
size
MW-2410001
1/8
1/8
MW-2410002
1/4
1/4
MW-2410003
3/8
3/8
MW-2410004
1/2
1/2
MW-2410102
1/8
1/8
MW-2410103
1/4
1/4
MW-2410104
3/8
3/8
code
hose
O.D. / I.D.
1001

BANJO fittings - D series
aluminium
D 11
code
bolt
hole
MW-2411001
MW-2411002
MW-2411003
MW-2411004
MW-2411005
M5
1/8
1/4
3/8
1/2
1002
D 17
D 12
code
MW-2412001
MW-2412002
MW-2412003
female
thread
size
1/8
1/4
3/8
bolt
hole
1/8
1/4
3/8
code
hose
O.D. / I.D.
bolt
hole
MW-2417006
MW-2417002
MW-2417003
MW-2417004
MW-2417005
4/2
6/4
6/4
8/6
8/6
1/8
1/8
1/4
1/8
1/4

LINE ON LINE range of products
RML R
MAN L
RFL R
V2V L
V3V L
LAM L
VSR L
VNR L
Line on Line is an exclusive range of products designed for pneumatic systems. They feature high effectiveness,
small dimensions and compact design. The modularity of their construction allows parallel, serial or combined
parallel-serial connection. Available with two FOX push-in fittings (for pipe-pipe connection), or with a male thread
and a FOX push-in fitting (for thread-pipe connection). Threaded connections are made of nickel-plated brass and
the body of technopolymer, which make these connectors very lightweight. Using LINE ON LINE family connectors,
any pneumatic function can be realized at any point of the system. Permanent marking of the body with a function
symbol and flow direction facilitates identification and assembly.
Line on Line family connectors consists of the following products:

-
-
-
-
-
-
-
-
RFL R - throttle check valves, regulate the air flow stream, used e.g. to regulate speed in pneumatic actuators,
RML R (RMC, RMS) - miniature pressure reducing valves, regulates air pressure in the system,
VSR L - quick drain valves,
VNR L - check valves,
V2V L and V3V L shut-off valves,
MAN L - connector with pressure gauge,
LAM L - pneumatic pressure indicator,
SOV L - solenoid valves.
1003
INDUSTRIAL PNEUMATICS - valves

Mini ball valve type 6560
Body material:
Ball material:
Ball seal:
Spindle seal:
Working temp.:
Nickel-plated brass
Chromium-plated brass
PTFE
NBR
General purpose valve designed for industrial installations. Widely used for air, gases, water, chemicals, petrochemical products.
code
hose O.D.
[mm]
flow diameter
[mm]
length
[mm]
working pressure
[bar]
AI-6560-04
AI-6560-06
AI-6560-08
AI-6560-10
AI-6560-12
4
6
8
10
12
3
5
5,5
8
10
44
48
48
58,5
66
20
20
20
20
20
Types of valves
valve type
function
see chapter
safety
tank protection against increasing pressure
check
allow air to flow in one direction

throttle and throttle check
allow to control flow rate and

flow direction of compressed air
shut-off
allow to shut-off air flow
ball
allow to shut off air flow

or change its direction (3-way)

processing
ball valves, butterfly valves and others

with integrated pneumatic actuator control
regulator
allow to adjust the pressure in installation
INDUSTRIAL PNEUMATICS - air treatment

units
quick drain
allow to remove air very quickly

e.g. from actuator chamber
distribution
allow to distribute compressed air

nto several devices
valve island
integrated set of separating valves
1004

Distribution valves
Distribution valves control flow direction of compressed air to enable connection or separation of air streams. Most
often distribution valves play a role of simple controllers for regulating units in a pneumatic system. They are used
to start and stop e.g. a pneumatic actuator either one- or two-directionally, depending on the valve type. Separation and switching of streams are performed by cooperation of movable and fixed mechanical parts of the valve.
According to the type of actuation, the valves are divided into:
- manual,
- mechanical,
- electric,
- pneumatic.
In pneumatic systems, distribution valves are located between basic pneumatic units and elements, to which they
are connected with hose assemblies or mounting panels. Every change of the position of a control element allows
to obtain different combinations of connection between different units of the pneumatic system. The distribution
valve can connect the compressed air outlet with one working chamber of the pneumatic system, simultaneously
the other chamber to the atmosphere, to cause movement of the actuator in a specific direction (fig. 1a). If the
actuator is to move in the opposite direction, the connections need to be reversed. It is achieved by changing
the position of the valve control element (fig. 1b). It is also possible to stop the actuator by disconnection of the
compressed air and atmosphere chambers of the actuator (fig. 1c). Thus the distribution valves can start, stop and
reverse the operation of the actuator.
STOP
fig. 1a
fig. 1b
fig. 1c
The distribution valves are pictured using graphic symbols in the form of a set of adjacent equal squares. The
number of squares corresponds to the number of modes of the distribution valve control unit. The number of connection ports drawn next to one of the squares indicates the number of paths in the valve. These connections are
drawn outside of that particular square which corresponds to normal (initial) position of the valve. The lines drawn
inside the squares show paths between connections for the corresponding position of the valve control element, the
arrows show the direction of air flow. A cut-off of the flow to a particular connection port is depicted by transverse
lines whereas connections of paths inside the valve are signified by dots at the intersection of those lines. Air outlet
to the atmosphere is marked by empty triangle whose vertex indicates the direction of the outlet flow. In the case
of direct outlet flow into the atmosphere the triangle is drawn next to the valve symbol. In the case of outlet flow
to the atmosphere through the connection port which allows connection of a hose assembly, a triangle is drawn
away from the valve symbol. Symbols indicating the external type of control are added to the distribution valve
symbol perpendicular to the direction of connection port. The power supply of the valve as well as the outlet flow
to the atmosphere is signified by an empty triangle placed away from the distribution valve symbol in the way that
the vertex faces the valve. The complete valve symbol should also include designation of all the connection ports
that are built into the valve. A designation system is defined by ISO 5599/3 standard. According to the standard,
the connection ports are labelled by digits. The port designations according to ISO 5599/3 standard are described
further in the catalogue.
1005

Distribution valves
1
2, 4 3, 5 12, 14 82, 84 X
-
supply connection port,

working or outlet connection ports,
outlet to the atmosphere (venting connection ports),
control connection ports,
venting connection ports of supporting valves,
pilots external supply
fig. 2. Types and markings of connection ports in control valves.
Classification of basic valves:

According to the number of ways (equal to the number of connection ports):
- 2-way,
- 3-way,
- 5-way.
According to the number of positions (number of adjacent squares on a valve symbol):
- 2-position,
- 3-position.
Note: Please remember that only one valve position can be active at the time.
Functional valve symbols
Valve 2/2 NC (2-way / 2-position, normally closed)
Valve 2/2 NO (2-way / 2-position, normally open)
Valve 3/2 NC (3-way / 2-position, normally closed)
Valve 3/2 NO (3-way / 2-position, normally open)
Valve 5/2 (5-way / 2-position)
Valve 5/3 CC (5-way / 3-position, shut-off in the middle position)
Valve 5/3 OC (5-way / 3-position, deaerated in middle position)
Valve 5/3 PC (5-way / 3-position, aerated in middle position)
Mechanical plunger control
Mechanical roller cam control
Mechanical bent roller cam control
Manual button control
Manual lever control
Manual foot-operated control
Direct electric control
Pneumatic control
Indirect electric control with inside pneumatic support
Cancelling spring (this symbol always occurs in monostable controlled valves)
1006

Series 70 - manual control
MAV distribution valve - 90 lever
Type:
Size:
Working press.:
Working temp.:
Connection:
Flow rate:
3/2, 5/2, 5/3

1/8, 1/4, 1/2
Up to 10 bar
1/8, 1/4, 1/2 BSP thread
550 l/min
- 1/8
1100 l/min
- 1/4
4600 l/min
- 1/2
(input pressure 6 bar and p = 1 bar)
Material:
Valve body made of aluminium, spool of nickel-plated aluminium, seal of NBR and cover of Hostaform.
Description: General purpose manual control distribution valves used mostly to control work of actuators. Can
be mounted in line, on the wall, directly to actuators or on manifold base.
MAV
series
MAV - manual
valve
size
LE
function
2 - 1/8
3 - 1/4
4 - 1/2
3 - 3/2
5 - 5/2
6 - 5/3
controlling (14)
S - mechanical spring
B - bi-stable
O - stable for 5/3
D - differential
A - pneumatic spring /
mechanical
1/4
type
code
NC
return (12)
PP - drawer
VL - lever
LE - lever 90
BRE - pilot-assisted plunger for
panel actuators
1/8
code
NC - normally closed
NO - normally opened
OO - 3/2 bi-stable or 5/2
CC - closed outlets
OC - deaerated outlets
PC - aerated outlets
1/2
type
code
MAV 23 LES
MAV 33 LES
MAV 43 LES
MW-7020000100
MW-7030000100
NC
NC
NC
MW-7010000200
MAV 23 LEB
MAV 33 LEB
MAV 43 LEB
MW-7020000200
MW-7030000200
OO
OO
OO
MW-7010000300
MAV 25 LES
MAV 35 LES
MAV 45 LES
MW-7020000300
MW-7030000300
OO
OO
OO
MW-7010000400
MAV 25 LEB
MAV 35 LEB
MAV 45 LEB
MW-7020000400
MW-7030000400
OO
OO
OO
MW-7010000500
MAV 36 LEO
MAV 46 LEO
MAV 26 LEO
MW-7020000500
MW-7030000500
CC
CC
CC
MW-7010000600
MAV 26 LEO
MAV 36 LEO
MAV 46 LEO
MW-7030000600
MW-7020000600
OC
OC
OC
MW-7010000700
MAV 36 LEO
MAV 46 LEO
MAV 26 LEO
MW-7020000700
MW-7030000700
PC
PC
PC
MAV 26 LES
MAV 36 LES
MAV 46 LES
MW-7030000900
MW-7010000900
MW-7020000900
OC
OC
OC
MW-7010001000
MAV 26 LES
MAV 36 LES
MAV 46 LES
MW-7020001000
MW-7030001000
CC
CC
CC
MW-7010001100
MAV 26 LES
PC
MAV 36 LES
PC
MW-7030001100
function and symbol
type
MW-7010000100
MW-7020001100
further details
3/2
5/2
5/3
MAV 46 LES
PC
1007

Series 70 - manual control
MAV distribution valve - front lever
Type:
Size:
Working press.:
Working temp.:
Connection:
Flow rate:
3/2, 5/2, 5/3

1/8, 1/4
Up to 10 bar
1/8, 1/4 BSP thread
550 l/min
- 1/8
1100 l/min
- 1/4
Material:
Description: General purpose manual distribution valves used mostly to control work of actuators. Can be mounted
in line, on the wall, directly to actuators or on manifold base.
MAV
series
MAV - manual
valve
size
2 - 1/8
3 - 1/4
VL
function
controlling (14)
3 - 3/2
5 - 5/2
6 - 5/3
PP - drawer
VL - lever
LE - lever 90
BRE - pilot-assisted plunger for
panel actuators
1/8
code
B
return (12)
B - bi-stable
O - stable for 5/3
D - differential
A - pneumatic spring /
mechanical
1/4
type
code
NC
further details
CC - closed outlets
PC aerated outlets
1/2
type
code
type
function and symbol
MW-7010001400
MAV 23 VLB
MAV 33 VLB
MW-7020001400
OO
OO
3/2
MW-7010001700
MAV 25 VLB
MAV 35 VLB
MW-7020001700
OO
OO
5/2
MW-7010001150
MAV 26 VLO
OC
MW-7010001160
MAV 26 VLS
OC
1008
5/3

Series 70 - solenoid control
SOV distribution valve - solenoid
Type:
Size:
Working press.:
Working temp.:
Connection:
Voltage:
Flow rate:
3/2, 5/2, 5/3

1/8, 1/4, 1/2
Up to 10 bar
1/8, 1/4, 1/2 BSP thread
12V / 24V / 110V / 220V
550 l/min
- 1/8
1100 l/min
- 1/4
4600 l/min
- 1/2
Material:
Description: General purpose valves with electric control (solenoid valves), used mostly to control actuators. Can
be mounted in line, to the wall, directly to actuators or on manifold base.
SOV
series
size
SOV - solenoid
valve
2 - 1/8
3 - 1/4
4 - 1/2
SO
function
controlling(14)
3 - 3/2
5 - 5/2
6 - 5/3
SO - solenoid
SE - solenoid assisted
1/8
code
MW-7010020100
MW-7010020200
MW-7010020300
MW-7010020400
MW-7010020500
MW-7010021100
MW-7010021200
MW-7010021300
MW-7010021500
MW-7010021600
MW-7010022100
MW-7010022200
MW-7010022300
MW-7010022400
MW-7010022500
MW-7010022600
S
return (12)
S - mechanical springs
B - bi-stable
D - differential
P - pneumatic
A - pneumatic / mechanical
spring
1/4
type
SOV 23 SOB
OO
SOV 23 SOS
NC
SOV 23 SEB
OO
SOV 23 SOS
NO
SOV 23 SES
NC
SOV 25 SOS
OO
SOV 25 SOB
OO
SOV 25 SOD
OO
SOV 25 SES
OO
SOV 25 SEB
OO
SOV 26 SOS
CC
SOV 26 SOS
OC
SOV 26 SOS
PC
SOV 26 SES
CC
SOV 26 SES
OC
SOV 26 SES
PC
code
MW-7020020100
MW-7020020200
MW-7020020300
MW-7020020400
MW-7020020500
MW-7020021100
MW-7020021200
MW-7020021300
MW-7020021500
MW-7020021600
MW-7020022100
MW-7020022200
MW-7020022300
MW-7020022400
MW-7020022500
MW-7020022600
NC
further details
CC - closed outlets
1/2
type
SOV 33 SOB
OO
SOV 33 SOS
NC
SOV 33 SEB
OO
SOV 33 SOS
NO
SOV 33 SES
NC
SOV 35 SOS
OO
SOV 35 SOB
OO
SOV 35 SOD
OO
SOV 35 SES
OO
SOV 35 SEB
OO
SOV 36 SOS
CC
SOV 36 SOS
OC
SOV 36 SOS
PC
SOV 36 SES
CC
SOV 36 SES
OC
SOV 36 SES
PC
code
MW-7030020100
MW-7030020200
MW-7030020300
MW-7030020400
MW-7030020500
MW-7030021100
MW-7030021200
MW-7030021300
MW-7030021500
MW-7030021600
MW-7030022100
MW-7030022200
MW-7030022300
MW-7030022400
MW-7030022500
MW-7030022600
type
SOV 43 SOB
OO
SOV 43 SOS
NC
SOV 43 SEB
OO
SOV 43 SOS
NO
SOV 43 SES
NC
SOV 45 SOS
OO
SOV 45 SOB
OO
SOV 45 SOD
OO
SOV 45 SES
OO
SOV 45 SEB
OO
SOV 46 SOS
CC
SOV 46 SOS
OC
SOV 46 SOS
PC
SOV 46 SES
CC
SOV 46 SES
OC
SOV 46 SES
PC
function and symbol
3/2
5/2
5/3
1009

Series 70 - solenoid control - accessories
Coils for series 70 valves of 1/8 and 1/4 size
code
MW-W0215000151
MW-W0215000101
MW-W0215000111
MW-W0215000121
MW-W0215000131
type
power
nominal voltage
22 8 BA
2VA-12V DC
22 8 BA
2VA-24V DC
22 8 BA
3VA-24V AC
22 8 BA
3VA-110V AC
22 8 BA
3VA-220V AC
starting
continuous work
12V DC
2VA
2VA
24V DC
2VA
2VA
24V 50/60Hz
4VA
3VA
110V 50/60Hz
4VA
3VA
220V 50/60Hz
4VA
3VA
Coils for series 70 valves of 1/8 and 1/2 size

code
MW-W0215000051
MW-W0215000001
MW-W0215000011
MW-W0215000021
MW-W0215000031
type
22 8
5VA-12V DC
22 8
5VA-24V DC
22 8
5VA-24V AC
22 8
5VA-110V AC
22 8
5VA-220V AC
power
nominal voltage
starting
continuous work
12V DC
5VA
5VA
24V DC
5VA
5VA
24V 50/60Hz
8VA
5VA
110V 50/60Hz
8VA
5VA
220V 50/60Hz
8VA
5VA
Electric plug 22 mm
code
type
cable
colour
MW-W0970510011
MW-W0970510012
MW-W0970510013
MW-W0970510014
MW-W0970510015
MW-W0970510016
MW-W0970510017
standard
LED 24V
LED 110V
LED 220V
LED + VDR 24V
LED + VDR 110V
LED + VDR 220V
PG9
PG9
PG9
PG9
PG9
PG9
PG9
black
transparent
transparent
transparent
transparent
transparent
transparent
VDR - circuit protection.
1010

Series 70 - pneumatic control
Distribution valves PNV
Type:
Size:
Working press.:
Min. press. control:
Working temp.:
Connection:
Flow rate:
3/2, 5/2, 5/3

1/8, 1/4, 1/2
Up to 10 bar
2,5 bar (monostable)
1 bar (bistable)
1/8, 1/4, 1/2 BSP female thread
550 l/min
- 1/8
1100 l/min
- 1/4
4600 l/min
- 1/2
Material:
Description: General purpose pneumatic distribution valves most often used to control actuators. Can be mounted
in line, on the wall, directly to actuators or on manifold base.
PNV
PN
controlling (14)
series
size
function
PNV - pneumatic valve
2 - 1/8
3 - 1/4
4 - 1/2
3 - 3/2
5 - 5/2
6 - 5/3
PN- pneumatic
1/8
code
S
return (12)
B - bi-stable
D - differential
O - stable for 5/3
A - pneumatic / mechanical
spring
1/4
type
code
NC
further details
CC - closed outlets
1/2
type
code
function and symbol
type
MW-7010010100
PNV 23 PNB
PNV 33 PNB
PNV 43 PNB
MW-7020010100
MW-7030010100
OO
OO
OO
MW-7010010200
PNV 23 PNS
PNV 33 PNS
PNV 43 PNS
MW-7020010200
MW-7030010200
NC
NC
NC
MW-7010010400
PNV 23 PNS
PNV 33 PNS
PNV 43 PNS
MW-7020010400
MW-7030010400
NO
NO
NO
MW-7010011100
PNV 25 PNS
PNV 35 PNS
PNV 45 PNS
MW-7020011100
MW-7030011100
OO
OO
OO
MW-7010011200
PNV 35 PNB
PNV 45 PNB
PNV 25 PNB
MW-7020011200
MW-7030011200
OO
OO
OO
MW-7010011300
PNV 25 PND
PNV 35 PND
PNV 45 PND
MW-7030011300
MW-7020011300
OO
OO
OO
MW-7010012100
PNV 36 PNS
PNV 46 PNS
PNV 26 PNS
MW-7020012100
MW-7030012100
CC
CC
CC
MW-7010012200
PNV 26 PNS
PNV 36 PNS
PNV 46 PNS
MW-7030012200
MW-7020012200
OC
OC
OC
MW-7010012300
PNV 26 PNS
PNV 36 PNS
PNV 46 PNS
MW-7020012300
MW-7030012300
PC
PC
PC
3/2
5/2
5/3
1011

Accessories - silencers
1012
code
CH
description
MW-W0970530051
MW-W0970530052
MW-W0970530053
MW-W0970530054
MW-W0970530055
MW-W0970530056
MW-W0970530057
M5
1/8
1/4
3/8
1/2
3/4
1
3,7
6,2
7,7
8
10,3
10
12
4,7
8,2
11,3
11,5
13
15
18
8
13
16
19
24
30
36
MW SFE silencer.
Material: nickel-plated brass, stainless steel wire.
+80C.
code
CH
MW-W0970530012
1/8
12
15
MW-W0970530013
1/4
15
7,5
19
MW-W0970530014
3/8
19
8,5
29,2
10
MW-W0970530015
1/2
23
31,5
14
MW-W0970530016
3/4
29
10
41,5
17
MW-W0970530017
36
12
51,2
23
code
CH
MW-W0970530021
MW-W0970530020
MW-W0970530022
MW-W0970530023
MW-W0970530024
MW-W0970530025
MW-W0970530026
MW-W0970530027
M5
M7
1/8
1/4
3/8
1/2
3/4
1
4
5
7
8,5
11
15
21,5
27
4
5
6
8
8
10
10
11,5
13
21
21
23,5
33
37
43,5
56
8
10
13
16
19
24
30
36
code
MW-W0970530001
MW-W0970530002
MW-W0970530003
MW-W0970530004
MW-W0970530005
MW-W0970530006
MW-W0970530007
M5
1/8
1/4
3/8
1/2
3/4
1
6
12
15
19
23
29
36
4,5
6
6,7
8,5
8,7
11
11,5
10
15
19
28,5
33
40,5
50,5
description
MW SCQ silencer for booster.
Material: nickel-plated brass, sintered nickel-plated bronze.
+80C.
description
MW SE silencer.
+80C.
description
MW SC silencer.
+80C.

Throttle and throttle check valves
Throttle and throttle check valves are used in pneumatic systems to control the flow rate of compressed air stream
and its direction.
Valves MRF-N, MRF-O type

Size:
M5, 1/8, 1/4, 3/8, 1/2
Working temp.: From -10C up to +50C (plastic)
From -10C up to +70C (brass)
Adjustment:
Manual or with screwdriver
MRF valves are designed for continuous speed control of pneumatic actuators. Throttle check valves can be
mounted directly in the connection port of an actuator (letter C at the end of the code) or distribution valve (letter
V at the end of the code). In both cases, the seal ensures a full flow rate during supply and flow rate control during deaeration. Throttle valves (letter B at the end of the code) can be used for the control of the flow rate in both
directions - during aeration and deaeration.
Construction of throttle and throttle check valves MRF-N and MRF-O
MRF-N
123456-
Brass pin
Nickel-plated brass body
Nickel-plated brass retaining ring
Brass gasket holding insert
NBR gasket
Nickel-plated or technopolymer brass
revolving ring
MRF-O
78910 11 12 13 -
NBR gasket
Technopolymer spring supporting ring
Stainless steel grabbing spring
Technopolymer retaining bush
Technopolymer release bush
Nickel-plated brass knob
Nickel-plated brass securing ring nut
C - cylinder
V - valve
B - bidirectional
1013

Throttle and throttle check valves
MRF
element
MRF - valve
type
body
N - with knob and ring nut

O - flash pin
M - nickel-plated brass
T - technopolymer
M5
function
plug
connection
thread
connection
4 - 4
5 - 5
6 - 6
8 - 8
10 - 10
12 - 12
M5 - M5
1/8 - G 1/8
1/4 - G 1/4
3/8 - G 3/8
1/2 - G 1/2
C - for cylinder
V - for valve
B - bidirectional
MRF COMPACT "O"

connection
/ hose I.D.
M5
5
1/8"
6
8
1/4"
10
12
10
3/8"
12
1/2"
1014
12
brass
MRF COMPACT "N"

technopolymer
brass
technopolymer
code
type
code
type
code
type
code
type
MW-9001001C
MRF O M C 4 M5
MW-9011001C
MRF O T C 4 M5
MW-9031001C
MRF N M C 4 M5
MW-9021001C
MRF N T C 4 M5
MW-9001101V
MRF O M V 4 M5
MW-9011101V
MRF O T V 4 M5
MW-9031101V
MRF N M V 4 M5
MW-9021101V
MRF N T V 4 M5
MW-9001601B
MRF O M B 4 M5
MW-9011601B
MRF O T B 4 M5
MW-9031201B
MRF N M B 4 M5
MW-9021201B
MRF N T B 4 M5
MW-9001002C
MRF O M C 5 M5
MW-9031003C
MRF N M C 5 M5
MW-9001113V
MRF O M V 5 M5
MW-9031103V
MRF N M V 5 M5
MW-9001603B
MRF O M B 5 M5
MW-9031203B
MRF N M B 5 M5
MW-9001007C
MRF O M C 6 M5
MW-9011007C
MRF O T C 6 M5
MW-9031005C
MRF N M C 6 M5
MW-9021005C
MRF N T C 6 M5
MRF N T V 6 M5
MW-9001105V
MRF O M V 6 M5
MW-9011105V
MRF O T V 6 M5
MW-9031105V
MRF N M V 6 M5
MW-9021105V
MW-9001612B
MRF O M B 6 M5
MW-9011612B
MRF O T B 6 M5
MW0-9031205B
MRF N M B 6 M5
MW-9021205B
MRF N T B 6 M5
MW-9001011C
MRF O M C 4 1/8
MW-9011011C
MRF O T C 4 1/8
MW-9031002C
MRF N M C 4 1/8
MW-9021002C
MRF N T C 4 1/8
MW-9001111V
MRF O M V 4 1/8
MW-9011111V
MRF O T V 4 1/8
MW-9031102V
MRF N M V 4 1/8
MW-9021102V
MRF N T V 4 1/8
MW-9001602B
MRF O M B 4 1/8
MW-9011602B
MRF O T B 4 1/8
MW-9031202B
MRF N M B 4 1/8
MW-9021202B
MRF N T B 4 1/8
MW-9001012C
MRF O M C 5 1/8
MW-9031004C
MRF N M C 5 1/8
MW-9001112V
MRF O M V 5 1/8
MW-9031104V
MRF N M V 5 1/8
MW-9001604B
MRF O M B 5 1/8
MW-9031204B
MRF N M B 5 1/8
MW-9001003C
MRF O M C 6 1/8
MW-9011003C
MRF O T C 6 1/8
MW-9031006C
MRF N M C 6 1/8
MW-9021006C
MRF N T C 6 1/8
MRF N T V 6 1/8
MW-9001101V
MRF O M V 6 1/8
MW-9011101V
MRF O T V 6 1/8
MW-9031106V
MRF N M V 6 1/8
MW-9021106V
MW-9001605B
MRF O M B 6 1/8
MW-9011605B
MRF O T B 6 1/8
MW-9031206B
MRF N M B 6 1/8
MW-9021206B
MRF N T B 6 1/8
MW-9001005C
MRF O M C 8 1/8
MW-9011005C
MRF O T C 8 1/8
MW-9031008C
MRF N M C 8 1/8
MW-9021008C
MRF N T C 8 1/8
MRF N T V 8 1/8
MW-9001103V
MRF O M V 8 1/8
MW-9011103V
MRF O T V 8 1/8
MW-9031108V
MRF N M V 8 1/8
MW-9021108V
MW-9001607B
MRF O M B 8 1/8
MW-9011607B
MRF O T B 8 1/8
MW-9031208B
MRF N M B 8 1/8
MW-9021208B
MRF N T B 8 1/8
MW-9001004C
MRF O M C 6 1/4
MW-9011004C
MRF O T C 6 1/4
MW-9031007C
MRF N M C 6 1/4
MW-9021007C
MRF N T C 6 1/4
MRF N T V 6 1/4
MW-9001102V
MRF O M V 6 1/4
MW-9011102V
MRF O T V 6 1/4
MW-9031107V
MRF N M V 6 1/4
MW-9021107V
MW-9001606B
MRF O M B 6 1/4
MW-9011606B
MRF O T B 6 1/4
MW-9031207B
MRF N M B 6 1/4
MW-9021207B
MRF N T B 6 1/4
MW-9001006C
MRF O M C 8 1/4
MW-9011006C
MRF O T C 8 1/4
MW-9031009C
MRF N M C 8 1/4
MW-9021009C
MRF N T C 8 1/4
MRF N T V 8 1/4
MW-9001104V
MRF O M V 8 1/4
MW-9011104V
MRF O T V 8 1/4
MW-9031109V
MRF N M V 8 1/4
MW-9021109V
MW-9001608B
MRF O M B 8 1/4
MW-9011608B
MRF O T B 8 1/4
MW-9031209B
MRF N M B 8 1/4
MW-9021209B
MRF N T B 8 1/4
MW-9001008C
MRF O M C 10 1/4
MW-9011008C
MRF O T C 10 1/4
MW-9031011C
MRF N M C 10 1/4
MW-9021011C
MRF N T C 10 1/4
MRF N T V 10 1/4
MW-9001106V
MRF O M V 10 1/4
MW-9011106V
MRF O T V 10 1/4
MW-9031111V
MRF N M V 10 1/4
MW-9021111V
MW-9001609B
MRF O M B 10 1/4
MW-9011609B
MRF O T B 10 1/4
MW-9031211B
MRF N M B 10 1/4
MW-9021211B
MRF N T B 10 1/4
MW-9001014C
MRF O M C 12 1/4
MW-9011014C
MRF O T C 12 1/4
MW-9031014C
MRF N M C 12 1/4
MW-9021014C
MRF N T C 12 1/4
MRF N T V 12 1/4
MW-9001123V
MRF O M V 12 1/4
MW-9011123V
MRF O T V 12 1/4
MW-9031114V
MRF N M V 12 1/4
MW-9021114V
MW-9001623B
MRF O M B 12 1/4
MW-9011623B
MRF O T B 12 1/4
MW-9031214B
MRF N M B 12 1/4
MW-9021214B
MRF N T B 12 1/4
MW-9001009C
MRF O M C 10 3/8
MW-9011009C
MRF O T C 10 3/8
MW-9031012C
MRF N M C 10 3/8
MW-9021012C
MRF N T C 10 3/8
MRF N T V 10 3/8
MW-9001114V
MRF O M V 10 3/8
MW-9011114V
MRF O T V 10 3/8
MW-9031112V
MRF N M V 10 3/8
MW-9021112V
MW-9001610B
MRF O M B 10 3/8
MW-9011610B
MRF O T B 10 3/8
MW-9031212B
MRF N M B 10 3/8
MW-9021212B
MRF N T B 10 3/8
MW-9001015C
MRF O M C 12 3/8
MW-9011015C
MRF O T C 12 3/8
MW-9031015C
MRF N M C 12 3/8
MW-9021015C
MRF N T C 12 3/8
MRF N T V 12 3/8
MW-9001124V
MRF O M V 12 3/8
MW-9011124V
MRF O T V 12 3/8
MW-9031115V
MRF N M V 12 3/8
MW-9021115V
MW-9001624B
MRF O M B 12 3/8
MW-9011624B
MRF O T B 12 3/8
MW-9031215B
MRF N M B 12 3/8
MW-9021215B
MRF N T B 12 3/8
MW-9001016C
MRF O M C 12 1/2
MW-9011016C
MRF O T C 12 1/2
MW-9031016C
MRF N M C 12 1/2
MW-9021016C
MRF N T C 12 1/2
MW-9001125V
MRF O M V 12 1/2
MW-9011125V
MRF O T V 12 1/2
MW-9031116V
MRF N M V 12 1/2
MW-9021116V
MRF N T V 12 1/2
MW-9001625B
MRF O M B 12 1/2
MW-9011625B
MRF O T B 12 1/2
MW-9031216B
MRF N M B 12 1/2
MW-9021216B
MRF N T B 12 1/2

Minivalves - VME 1 series
- Type: 3/2, NC, NO, monostable
- Version: valves with fittings
- Control: mechanical or manual
- Nominal flow rate (at 6 bar p = 1 bar): 60 l/min
- Connection: push-in fittings 4
- Low actuation force: 8 N
- Working pressure range: 2 10 bar
- Working temperature range: -10C to +60C
- Operation with unlubricated compressed air also possible
Pedal operated valves - PEV series

- Type: 5/2, mono and bi-stable
- Control: pedal operated
- Connection: G 1/4
Distribution valves according to ISO 5599/1 - IPV-ISV series

- Type: 5/2, 5/3, mono and bi-stable
- Version: for board assembly with normalised connection surface
- Control: electric, pneumatic, manually supported
- Nominal flow rate (at 6 bar p = 1 bar): 1100 2700 l/min
(depending on size)
- Size: ISO 1, ISO 2
- Working pressure range: vacuum 10 bar (depending on type)
Distribution valves - MACH 11, 16, 18 series

- Type: 5/2, 5/3, mono and bi-stable
- Version: for board assembly with normalised connection surface
- Control: electric, pneumatic, manually supported
- Electrical connection: according to DIN 43650, shape C
- Working pressure range: vacuum 10 bar (depending on type)
Valves island for MACH 16 series

- Type: for MACH 16 valves with electric control
- Versions: with board for mono or bi-stable valves, optional connection
of additional board for monostable valves
- Max. number of coils: 16
- Operation voltage: 24V DC, 24V AC
- Valve actuation indicator: LED;
- Internal protection: IP 65
- Optional island reconfiguration (board for bi-stable valves exchanged
for board for monostable valves)
1015

Distribution valves - PIV.P 10mm, PIV.M 15mm series
- Type: 3/2, NC, NO, monostable
- Version: for board assembly
- Control: electric, direct
- Service life: more than 50 million cycles
- Connection: M3, M5 (depending on size)
- Internal protection: IP60
- Maximum operation frequency: 30 Hz
- Working temperature range: +5C to +50C
Distribution valve - PIV.I, PIV.T, PIV.B series

- Type: 2/2, 3/2, NC, NO, monostable
- Version: for board assembly
- Service life: 25 million cycles
- Power consumption: 2 16 W (depending on series)
- Max. operation frequency: 15 to 30 Hz (depending on series)
- Used when high operation frequency and short response time are required
Distribution valve - PIV series

- Type: 2/2, 3/2, NC, NO, monostable,
- Service life: 25 million cycles (depending on series)
- Power consumption: 2 16 W (depending on series)
- Maximum operation frequency: 15 30 Hz (depending on series)
- Used when high operation frequency and short response time are required
Distribution valve according to CNOMO 060580

- Type: 3/2, NC, monostable,
- Versions: for board assembly, mono or bi-stable manual actuation
- Operational voltage: 24V DC, 24V 110V 220V AC
Modular slave IP 20
- Type: PROFIBUS-DP, INTERBUS-S
- Versions: 16 inputs / 32 inputs, 16 inputs, 16 inputs + 16 outputs
- Operational voltage: 24V DC (18 V 30V), around 100 mA
- Working temperature range: 0C to +55C
1016

Modular slave IP 65
- Versions: 8 outputs, 16 inputs, 8 inputs + 4 outputs
- Operational voltage: 24V DC (18V 30V), around 100 mA
- Working temperature range: from 0 up to +55C
Modular slave IP 65 for MACH 16 valves

- Versions: 8 outputs, 16 inputs, 8 inputs + 4 outputs
- Operational voltage: 24V DC (18V 30V), around 100 mA
- Working temperature range: from 0 up to +55C
MULTIMACH valves island

- Valve connection: connection ports 2 and 4, 4, 6, 8 mm
threaded exhaust outlet port 3/8 or fitting 8
- Working temperature range: 0C to +55C
- Nominal flow rate (at 6 bar p = 1 bar): 150 - 400 - 800 l/min (depending on size)
- Coil operational voltage: 24V DC
- Power consumption: 1.2 W
- Electrical connection: 9 or 25 pin plug connector.
- Valves with three different values of a nominal flow rate can mounted together
In-line flow micro regulators - RFL series

- Type: throttle check, throttle valve
- Connection: M5, 1/8, 1/4, 3/8, 1/2
- Max. working pressure: 10 bar
- Max. working temperature: +70C
Quick drain valves - VSR series

- Connection: 1/8, 1/4, 1/2
- Nominal flow rate (at 6 bar, P>A): 900 3500 l/min
- Nominal flow rate (at 6 bar, A>R): 1700 7800 l/min
- Min. working pressure: 0.5 bar
- (P - supply connection, A - working, R - venting)
1017

Check and controlled throttle check valves - STP series
- Type: controlled check valve, controlled throttle check valve
- Connection: 1/8, 1/4, 3/8, 1/2
- Pilot wire outside diameter: 4 mm
- Supply pipe outside diameter: 6 - 8 - 10 - 12 mm
- Nominal flow rate (at 6 bar): 250 1700 l/min
- Working pressure range: 0.5 10 bar
- Working temperature range: from -10C up to 70C
Start-up valves - VCS series

- Type: start-up valve
- Connection: 1/8, 1/4, 3/8, 1/2
- Working temperature range: from -10C up to +80C
Shuttle valves - VOR series

- Type: circuit selector
- Connection: 1/8, 1/4
- Nominal diameter: 2,5 mm
Check valves - VNR series

- Type: check valve
- Connection: 1/8, 1/4
- Nominal diameters: 5, 2, 7 mm
- Valve opening pressure: 0.05 bar
Logic valve
- Type: logic valve
- Versions: basic logic functions: OR, AND, YES, NOT, MEMORY
- Connection: push-in fitting 4 mm
- Nominal diameter: 2.7 mm
- Working pressure range: 0 8 bar (depends on version)
- Working temperature range: from -10 up to +60C
- Nominal flow rate (at 6 bar p=1 bar): 100 l/min
1018
INDUSTRIAL PNEUMATICS - air treatment units

Atmospheric air is polluted with gases, vapours and molecules of various chemical compounds as well as with
swirling dust of various shape, structure and density. The composition and concentration of pollutants in the atmospheric air is dependent on the location and time of the year. All of these pollutions enter pneumatic systems enriched
with impurities brought during compression, unless they are removed from the air before and after compression.
In pneumatics, compressed air is prepared in special devices (air preparation units - FRL) which:
- remove impurities from air (F-filter),
- regulate pressure to the required level (R-regulator),
- lubricate the air (L-lubricator).
In addition, a shut-off start-up valve is usually installed before FRL units whereas a soft-start valve after FRL units
(before a final device).
Filtered air should not contain:
- water in the form of drops - water vapours are allowable as long as the dew-point (the condensation temperature
of the air at a given pressure and humidity) is about 5 10 C below the lowest temperature in the installation,
and the relative humidity at the lowest working temperature does not exceed 80% (relative humidity is expressed
in %, 0-dry air without water vapour, 100% saturated with water vapour its cooling causes immediate condensation),
- oil and other fluids in the form of drops,
- mechanical pollution greater than 50 m.
Filters - selection and maintenance.
- A filter is a device that does not remove water in the form of steam from the air (for this purpose use a refrigeration or adsorption dryer which transmits air through a tank with adsorbent which captures the moisture).
- A filter insert should be replaced every half a year on average (depending on the extent of air pollution)
- A filter with an insert of 5 m filtration degree should be installed before an accurate filter (depurator). It removes
biggest particles so that sudden clogging of accurate filters is avoided.
Regulating valves (regulators) - selection and maintenance
- The range of regulating valve output should be carefully selected - the required working pressure must be within
the range but as close to the maximum valve output pressure as possible. Then the regulator operates closer
to its set point value and has smaller hysteresis.
- Care must be taken to provide only clean air to the regulating valve inlet. Possible impurities can cause problems
with closing of the valve and continuous air venting through secondary venting.
- Some regulating valves are equipped with an air vent working continuously, which is not its disadvantage (it
allows to maintain the required value of output pressure more precisely).
- the required pressure in majority of regulators should be set from the bottom.
Lubricators - selection and maintenance
- Most of pneumatic actuators (e.g. all drives-servo motors MW-...) can work without lubrication (without an
external lubricator). If a lubricator is used, its tank must be refilled with oil periodically because oil mist rinses
factory-applied grease off.
- At assembly and start-up of the lubricator, a needle which adjusts the amount of the oil mist must be closed
and then opened to the required dosage of oil.
- The distance between the lubricator and actuators should not exceed 7 meters.
device
filter
regulator (regulating valve)
lubricator
filter-regulator
shut-off start-up valve
soft-start valve
main parameters
degree of filtration
type of condensate drain
output pressure range
tank volume
way of oil refilling
type of condensate drain
output pressure range
type of control signal
type of control signal
common parameters
- size of connection ports

- nominal flow
- working temp.
1019

EWO series
Panel regulator
Material:
Size:
Inlet pressure:
Working temp.:
Connection:
Flow rate:
Zinc and aluminium alloy

3/8
Up to 25 bar
3/8 BSP thread
1000 l/min
(inlet pressure 8 bar and p = 1 bar)
Membrane type regulating valve with a pressure gauge integrated into a handwheel, perfect for panel mounting.
Equipped with an air venting system. Highly accurate in maintaining output pressure. A set for panel mounting
available (EW-367K33).
code
outlet pressure range

[bar]
EW-367331
EW-367332
EW-367333
EW-367334
0,5 3
0,5 6
0,5 10
0,5 16
High pressure regulator

Material:
Size:
Inlet pressure:
Working temp.:
Connection:
Flow rate:
Brass
DN 12, DN 20
Up to 60 bar
1/4, 3/8, 1 BSP thread
1400 l/min - BG I
5000 l/min - BG II
(inlet pressure 20 bar and p = 4 bar)
High pressure piston-type regulating valve. Available in two versions BG I (DN 12) and BG II (DN 20). Equipped
with an air venting system. Highly accurate in maintaining output pressure. Robust brass housing. As a standard
a pressure gauge 63 mm is mounted (version without a pressure gauge available).
code
EW-302323
EW-302324
EW-302325
EW-302326
EW-302333
EW-302334
EW-302335
EW-302336
EW-302393
EW-302394
EW-302395
EW-302396
1020
DN
[mm]
connection
12
1/4
12
3/8
20

[bar]
0,5 12
1 20
2 35
3 50
0,5 12
1 20
2 35
3 50
0,5 12
1 20
2 35
3 50

BIT series
Main advantages of BIT air preparation system are reduced dimensions, long service life and excellent qualityto-price ratio. Especially recommended for de-centralized compressed air systems or near the final actuators.
FIL filter
Size:
Degree of filtration:
Inlet pressure:
Working temp.:
Connection:
Condensate drain:
Flow rate:
FIL
BIT
1/8
RMSA
condensate drain
element
series
connection
FIL - filtr
BIT
1/8 - 1/8
1/4 - 1/4
5 - 5 m
20 - 20 m
50 - 50 m
1/8"
code
MW-5101001
MW-5101002
MW-5101003
MW-5101004
MW-5101005
MW-5101006
1/8 1/4
5 m, 20 m, 50 m
Up to 13 bar
Up to +50C
1/8, 1/4 BSP female thread
Manual / automatic (RMSA)
Automatic drain (SAC)
1200 l/min
- 1/8
1200 l/min
- 1/4
type
FIL BIT 1/8 5 RMSA
FIL BIT 1/8 20 RMSA
FIL BIT 1/8 50 RMSA
FIL BIT 1/8 5 SAC
FIL BIT 1/8 20 SAC
FIL BIT 1/8 50 SAC
RMSA - manual/ semi-automatic

SAC - automatic, using pressure drop
1/4"
code
MW-5201001
MW-5201002
MW-5201003
MW-5201004
MW-5201005
MW-5201006
type
FIL BIT 1/4 5 RMSA
FIL BIT 1/4 20 RMSA
FIL BIT 1/4 50 RMSA
FIL BIT 1/4 5 SAC
FIL BIT 1/4 20 SAC
FIL BIT 1/4 50 SAC
degree of
filtration
[m]
5
20
50
5
20
50
condensate
drain
RMSA
SAC
Condensate draining, replacing filter inserts - service tips
fig. 1a
fig. 1b
fig. 1c
fig. 1d
When the handwheel is in the centre position, the drain valve is semi-automatic. It opens when the tank is vented
and closes after tank is pressurised (fig. 1a). To drain the pressurised tank, press the drain valve (fig. 1b). Clockwise turn of the handwheel closes the drain valve regardless of the tank pressure (fig. 1c). To clean or replace filter
inserts, unscrew the separator screen of the centrifuge (fig. 1d). To disassemble the tank use MW-9170601 key.
1021

BIT series
MR regulator
Size:
Outlet press. range:
Inlet pressure:
Working temp.:
Connection:
Pressure gauge port:
Flow rate:
MR
element
MR - regulating valve
MRA - water regulating valve
MR BIT
MR BIT FC
MR BIT SR

MRA BIT
BIT
FC
1/8
02
series
version
connection
BIT
FC
SR
1/8 - 1/8
1/4 - 1/4
02 - 02 bar
04 - 04 bar
08 - 08 bar
012 - 012 bar
- standard version for pressure adjustment of compressed air in pneumatic system

- controlled relief to allow greater accuracy in regulation by means of slight, continuous air relief.
- relieves the downstream circuit quickly when the upstream pressure drops. Mount the SR regulator
between the start-up valve and the final application.
- regulates pressure in water circuits; without secondary venting.
1/8"
code
MW-5102001
MW-5102002
MW-5102003
MW-5102004
MW-5107001
MW-5107002
MW-5107003
MW-5107004
MW-5108001
MW-5108002
MW-5108003
MW-5108004
MW-5111001
MW-5111002
1/8, 1/4
02, 04, 08, 012 bar
Up to 13 bar
Up to +50C
1/8 BSP female thread
600 l/min
- 1/8
600 l/min
- 1/4
type
MR BIT SR 1/8 02
MR BIT SR 1/8 04
MR BIT SR 1/8 08
MR BIT SR 1/8 012
MR BIT 1/8 02
MR BIT 1/8 04
MR BIT 1/8 08
MR BIT 1/8 012
MRA BIT 1/8 02
MRA BIT 1/8 04
MRA BIT 1/8 08
MRA BIT 1/8 012
MR BIT FC 1/8 02
MR BIT FC 1/8 04
1/4"
code
MW-5202001
MW-5202002
MW-5202003
MW-5202004
MW-5207001
MW-5207002
MW-5207003
MW-5207004
MW-5208001
MW-5208002
MW-5208003
MW-5208004
MW-5211001
MW-5211002
type
MR BIT SR 1/4 02
MR BIT SR 1/4 04
MR BIT SR 1/4 08
MR BIT SR 1/4 012
MR BIT 1/4 02
MR BIT 1/4 04
MR BIT 1/4 08
MR BIT 1/4 012
MRA BIT 1/4 02
MRA BIT 1/4 04
MRA BIT 1/4 08
MRA BIT 1/4 012
MR BIT FC 1/4 02
MR BIT FC 1/4 04
outlet pressure
range
[bar]
02
04
08
0 12
02
04
08
0 12
02
04
08
0 12
02
04
version
MR BIT SR
MR BIT
MRA BIT
MR BIT FC
Padlockable microregulator
BIT series micro-regulator valve is also available with a padlock. A
pin with a hole projects from the top of the knob. When the knob
is in the push-lock position, the padlock can be inserted in the
hole, preventing any changes in the setting of the microregulator.
A padlock and two keys are supplied with the regulator.
1022

BIT series
FR filter - regulator
Size:
Inlet pressure:
Working temp.:
Connection:
Flow rate:
BIT
FR
element
series
FR - filter regulator
BIT
1/4
02
RMSA
connection degree of filtration outlet pressure range

1/8 - 1/8
1/4 - 1/4
5 - 5 m
20 - 20 m
50 - 50 m
1/8"
code
MW-5105001
MW-5105013
MW-5105002
MW-5105014
MW-5105003
MW-5105015
MW-5105004
MW-5105016
MW-5105005
MW-5105017
MW-5105006
MW-5105018
MW-5105007
MW-5105019
MW-5105008
MW-5105020
MW-5105009
MW-5105021
MW-5105010
MW-5105022
MW-5105011
MW-5105023
MW-5105012
MW-5105024
1/8 1/4
02, 04, 08, 012 bar
5 m, 20 m, 50 m
Up to 13 bar
Up to +50C
1/8 1/4 BSP female thread
600 l/min
- 1/8
600 l/min
- 1/4
type
FR BIT 1/8 5 02 RMSA
FR BIT 1/8 5 02 SAC
FR BIT 1/8 20 02 SAC
FR BIT 1/8 5 04 SAC
FR BIT 1/8 5 08 SAC
FR BIT 1/8 20 012 SAC
FR BIT 1/8 50 012 SAC
02 - 02 bar
04 - 04 bar
08 - 08 bar
012 - 012 bar
1/4"
code
MW-5205001
MW-5205013
MW-5205002
MW-5205014
MW-5205003
MW-5205015
MW-5205004
MW-5205016
MW-5205005
MW-5205017
MW-5205006
MW-5205018
MW-5205007
MW-5205019
MW-5205008
MW-5205020
MW-5205009
MW-5205021
MW-5205010
MW-5205022
MW-5205011
MW-5205023
MW-5205012
MW-5205024
type
FR BIT 1/4 5 02 SAC
FR BIT 1/4 5 04 SAC
FR BIT 1/4 5 08 SAC
FR BIT 1/4 20 012 SAC
FR BIT 1/4 50 012 SAC
condensate drain
RMSA - manual/ semi-automatic
outlet pressure
range
[bar]
degree of
filtration
[m]
5
02
20
50
5
04
20
50
5
08
20
50
5
0 12
20
50
condensate
drain
RMSA
SAC
RMSA
SAC
RMSA
SAC
RMSA
SAC
RMSA
SAC
RMSA
SAC
RMSA
SAC
RMSA
SAC
RMSA
SAC
RMSA
SAC
RMSA
SAC
RMSA
SAC
1023

BIT series
LUB lubricator
Size:
Tank volume:
Inlet pressure:
Working temp.:
Connection:
Flow rate:
1/8, 1/4
26,5 cm3
Up to 13 bar
Up to +50C
710 l/min
- 1/8
710 l/min
- 1/4
Compressed air lubricator is designed to saturate working medium with oil. It protects against corrosion and reduces
the wear of pneumatic system elements.
LUB
BIT
1/4
element
series
connection
LUB - lubricator
BIT
1/8 - 1/8
1/4 - 1/4
1/8"
1/4"
code
type
code
type
MW-5103001
LUB BIT 1/8
MW-5203001
LUB BIT 1/4
Air preparation elements of BIT series can be combined into units according to customer specifications.
BIT elements assembly
- Fit the mounting plates (MW-9170201 assembly set) in the slots under the body of BIT element.
- Check if there are of O-rings between threaded connections.
- Check the compatibility of flow direction with the arrows on the body of elements, connect elements.
Also available: wall mounting brackets (MW-9200701; MW-9170301) and spare parts:
filter and lubricator tanks, handwheel sets for regulating valves, removable filter inserts and many other.
1024

BIT series
Distributor
-Versions: PA
Air preparation unit - F+R+L

- Versions: F+R+L BIT 1/8, F+R+L BIT 1/4
- Unit elements: filter, regulating valve, lubricator
- Threaded connection: 1/8,1/4
- Outlet pressure range: 0 - 2 - 4 - 8 - 12 bar
- Degree of filtration: 5 - 20 - 50 m
- Nominal flow rate (at 6 bar, p = 1 bar): 280 l/min
- Max. inlet pressure: 13 bar
- Condensate drain: manual, semi-automatic or automatic
Air preparation unit - FR+L

- Versions: FR+L BIT 1/8, FR+L BIT 1/4
- Unit elements: filter + regulating valve, lubricator
- Threaded connection: 1/8,1/4
Air preparation unit - F+D

- Versions: F+D BIT 1/8, F+D BIT 1/4
- Unit elements: filter, precision filter
- Threaded connection: 1/8, 1/4
- Degree of filtration: filter: 5 m - precision filter: 0.01 m
Air preparation unit - F+L

- Versions: F+L BIT 1/8, F+L BIT 1/4
- Unit elements: filter, lubricator
1025

NEW DEAL series
Due to its metal construction, the entire range of NEW DEAL elements is resistant to heavy duty working conditions. Designed for high pressure application (up to 18 bar).
FIL filter
Size:
Inlet pressure:
Working temp.:
Connection:
Condensate drain:
1/4, 3/8, 1/2, 3/4, 1

4 m, 20 m, 50 m
Up to 18 bar
Up to +50C
1/4, 3/8, 1/2, 3/4, 1 BSP female thread
Manual / semi-automatic (RMSA)
Automatic (SAC)
1720 l/min
- 1/4
4100 l/min
- 3/8, 1/2
11000 l/min
- 3/4, 1
Flow rate:
FIL
1/4
element
connection
condensate drain
FIL - filter
1/4 - 1/4
3/8 - 3/8
1/2 - 1/2
3/4 - 3/4
1 - 1
4 - 4 m
20 - 20 m
50 - 50 m
RMSA - manual / semi-automatic

RA - automatic, float type, drainage independent of the flow
and pressure
1/4"
3/8"
RMSA
1/2"
3/4"
degree of condenfiltration
sate
[m]
drain
code
type
code
type
code
type
code
type
code
type
MW1221005
FIL 1/4
4 RMSA
MW1321005
FIL 3/8
4 RMSA
MW1421005
FIL 1/2
4 RMSA
MW1521005
FIL 3/4
4 RMSA
MW1621005
FIL 1
4 RMSA
MW1221006
FIL 1/4
20 RMSA
MW1321006
FIL 3/8
20 RMSA
MW1421006
FIL 1/2
20 RMSA
MW1521006
FIL 3/4
20 RMSA
MW1621006
FIL 1
20 RMSA
20
MW1221008
FIL 1/4
50 RMSA
MW1321008
FIL 3/8
50 RMSA
MW1421008
FIL 1/2
50 RMSA
MW1521008
FIL 3/4
50 RMSA
MW1621008
FIL 1
50 RMSA
50
MW1221013
FIL 1/4
4 SAC
MW1321013
FIL 3/8
4 SAC
MW1421013
FIL 1/2
4 SAC
MW1221014
FIL 1/4
20 SAC
MW1321014
FIL 3/8
20 SAC
MW1421014
FIL 1/2
20 SAC
20
MW1221016
FIL 1/4
50 SAC
MW1321016
FIL 3/8
50 SAC
MW1421016
FIL 1/2
50 SAC
50
MW1321009
FIL 3/8
4 RA
MW1421009
FIL 1/2
4 RA
MW1521009
FIL 3/4
4 RA
MW1621009
FIL 1
4 RA
MW1321010
FIL 3/8
20 RA
MW1421010
FIL 1/2
20 RA
MW1521010
FIL 3/4
20 RA
MW1621010
FIL 1
20 RA
20
MW1321012
FIL 3/8
50 RA
MW1421012
FIL 1/2
50 RA
MW1521012
FIL 3/4
50 RA
MW1621012
FIL 1
50 RA
50
1026
RMSA
SAC
RA

NEW DEAL series
REG regulator
Size:
Inlet pressure:
Working temp.:
Connection:
1/4, 3/8, 1/2, 3/4, 1

02, 04, 08, 012 bar
Up to 18 bar
Up to +50C
1/4, 3/8, 1/2, 3/4, 1 BSP thread
1/8 BSP female thread for valves to 1/2
(above - BSP 1/4 female thread)
650 l/min
- 1/4
2500 l/min
- 3/8, 1/2
4500 l/min
- 3/4, 1
Flow rate:
REG
1/4
04
element
connection
REG - regulator
1/4 - 1/4
3/8 - 3/8
1/2 - 1/2
3/4 - 3/4
1 - 1
02 - 02 bar
04 - 04 bar
08 - 08 bar
012 - 012 bar
1/4"
3/8"
1/2"
3/4"
outlet press.
range
code
type
code
type
code
type
code
type
code
type
MW1202004
REG 1/4
02
02
MW1202001
REG 1/4
04
MW1302001
REG 3/8
04
MW1402001
REG 1/2
04
MW1502001
REG 3/4
04
MW1602001
REG 1
04
04
MW1202002
REG 1/4
08
MW1302002
REG 3/8
08
MW1402002
REG 1/2
08
MW1502002
REG 3/4
08
MW1602002
REG 1
08
08
MW1202003
REG 1/4
012
MW1302003
REG 3/8
012
MW1402003
REG 1/2
012
MW1502003
REG 3/4
012
MW1602003
REG 1
012
0 12
Padlockable regulator
NEW DEAL series regulating valve is also available with a padlock.
A pin with a hole projects from the top of the knob. When the knob
is in the push-lock position, the padlock can be inserted in the hole,
preventing any changes in the setting of the regulator. A padlock
and two keys are supplied with the regulator.
1027

NEW DEAL series
Size:
Inlet pressure:
Working temp.:
Connection:
Flow rate:
FR
1/4
1/4, 3/8, 1/2

08, 012 bar
Up to 18 bar
Up to +50C
1/4, 3/8, 1/2 BSP female thread
700 l/min
- 1/4
2500 l/min
- 3/8, 1/2
08
RMSA
element
connection
FR - filter - regulator
1/4 - 1/4
3/8 - 3/8
1/2 - 1/2
4 - 4 m
20 - 20 m
50 - 50 m
08
0 12
1/4"
3/8"
1/2"
code
type
code
type
code
type
MW-1225029
FR 1/4
4 08 RMSA
MW-1325029
FR 3/8
4 08 RMSA
MW-1425029
FR 1/2
4 08 RMSA
FR 1/4
4 08 SAC
MW-1325509
FR 3/8
4 08 SAC
MW-1425509
MW-1225509
MW-1225030
MW-1225510
MW-1225032
MW-1225511
MW-1225053
MW-1225513
MW-1225054
MW-1225514
MW-1225056
MW-1225516
1028
MW-1325510
FR 3/8
20 08 SAC
MW-1425510
RMSA - manual/semi-automaitc
outlet pressure
range
[bar]
MW-1325512
FR 3/8
50 08 SAC
MW-1425512
SAC
08
FR 1/2
20 08 SAC
MW-1325513
FR 3/8
4 012 SAC
MW-1425513
RMSA
50
FR 1/2
50 08 SAC
SAC
FR 1/4
20 012 SAC
MW-1325514
FR 3/8
20 012 SAC
MW-1425514
FR 1/2
20 012 SAC
FR 1/4
FR 3/8
FR 1/2
MW-1325056
MW-1425056
50 012 RMSA
50 012 RMSA
50 012 RMSA
FR 1/4
50 012 SAC
MW-1325516
FR 3/8
50 012 SAC
MW-1425516
RMSA
4
FR 1/2
4 012 SAC
FR 3/8
FR 1/2
FR 1/4
MW-1325054
MW-1425054
20 012 RMSA
20 012 RMSA
20 012 RMSA
FR 1/2
50 012 SAC
RMSA
20
SAC
FR 3/8
FR 1/2
FR 1/4
MW-1325053
MW-1425053
4 012 RMSA
4 012 RMSA
4 012 RMSA
FR 1/4
4 012 SAC
condensate
drain
RMSA
FR 1/4
FR 3/8
FR 1/2
MW-1325032
MW-1425032
50 08 RMSA
50 08 RMSA
50 08 RMSA
FR 1/4
50 08 SAC
degree of
filtration
[m]
4
FR 1/2
4 08 SAC
FR 1/4
FR 3/8
FR 1/2
MW-1325030
MW-1425030
20 08 RMSA
20 08 RMSA
20 08 RMSA
FR 1/4
20 08 SAC
condensate drain
SAC
RMSA
0 12
20
SAC
RMSA
50
SAC

NEW DEAL series
LUB lubricator
Size:
Tank volume:
Inlet pressure:
Working temp.:
Connection:
Flow rate:
1/4, 3/8, 1/2, 3/4, 1

50 cm3 - 1/4
150 cm3 - 3/8, 1/2
380 cm3 - 3/4, 1
Up to 18 bar
Up to +50C
1/4, 3/8, 1/2, 3/4, 1 BSP female thread
1100 l/min
- 1/4
4300 l/min
- 3/8, 1/2
16000 l/min
- 3/4, 1
LUB
1/4
element
connection
LUB - lubricator
1/4 - 1/4
3/8 - 3/8
1/2 - 1/2
3/4 - 3/4
1 - 1
1/4"
3/8"
1/2"
3/4"
code
type
code
type
code
type
code
type
code
type
MW-1223001
LUB 1/4
MW-1323001
LUB 3/8
MW-1423001
LUB 1/2
MW-1523001
LUB 3/4
MW-1623001
LUB 1
Air preparation elements of NEW DEAL series can be combined into units according to customer specifications.
New Deal elements assembly
Also available: wall mounting brackets (MW-9200701; MW-9400701), mounting screws, filter and lubricator tanks,
handwheel sets for regulating valves, removable filter inserts and many other.
1029

NEW DEAL series
Pilot assisted pressure regulator
- Versions: REG. PIL. 3/8, 1/2
- Outlet pressure range: depends on a pilot valve
Pressure regulating start-up valve

- Threaded connection: 3/4, 1
Depurator - D
- Versions: DEP. ND 3/8, DEP. ND 1/2
- Degree of purification: 99.97%
- Degree of filtration: 0.01 mm
- Recommended flow rate (at 6 bar): 230 l/min
- Working medium: compressed air with 4 m filtration degree
Start-up valves - V
- Versions: V3V ND 1/4, V3V ND 3/8-1/2, V3V ND 3/4, V3V ND 1
- Threaded connection: 1/4, 3/8, 1/2, 3/4, 1
- Nominal flow rate (at 6 bar, p = 1 bar): 1500 10 200 l/min
(depends on the version)
- Max. working pressure: 13 18 bar (depends on a version)
- Control: manual, electric
Automatic condensate drains

- Version: SCAL. ND 1/2
- Threaded connection: 1/2
1030

NEW DEAL series
Air preparation unit - FRL
- Versions: FRL ND 1/4, FRL ND 3/8, FRL ND 1/2, FRL ND 3/4, FRL ND 1
- Threaded connection: 1/4, 3/8, 1/2, 3/4,1
- Nominal flow rate (at 6 bar, p = 1 bar): 400 3700 l/min
(depends on a version)

- Versions: FR+L ND 1/4, FR+L ND 3/8, FR+L ND 1/2
- Unit elements: filter + regulating valve, lubricator
- Threaded connection: 1/4, 3/8, 1/2
Air preparation unit - FRPL

- Versions: FRPL ND 3/4, FRPL ND 1
- Unit elements: filter, pilot operated regulating valve, lubricator
- Outlet pressure range: 0 - 8 - 12 bar
Air preparation unit - VFRL

- Versions: VFRL ND 1/4, VFRL ND 3/8, VFRL ND 1/2
- Unit elements: start-up valve, filter, regulating valve, lubricator
Air preparation unit - V+FR+L

- Versions: VFR+L. ND 1/4, VFR+L. ND 3/8, VFR+L. ND 1/2
- Unit elements: start-up valve, filter + regulating valve, lubricator
1031

NEW DEAL series
Air preparation unit - FRPVL
- Versions: FRPVL. ND 3/4, FRPVL. ND 1
- Unit elements: filter, pilot operated regulating valve, start-up valve, lubricator

- Versions: F+L. ND 1/4, F+L. ND 3/8, F+L. ND 1/2, F+L. ND 3/4, F+L. ND 1
- Unit elements: filter + lubricator

- Versions: F+D. ND 3/8, F+D. ND 1/2
- Unit elements: filter, precision filter
Distributor
- Versions: PA ND 1/4, PA ND 3/8-1/2, PA ND 3/4-1
1032

SKILLAIR series
SKILLAIR series allows any combination of shut-off valves, filters, regulators, lubricators, branching modules. Each
element can be disassembled without the need to disconnect supply pipes.
Using SKILLAIR series it is possible to create a unit consisting of several FRL elements according to customer
specifications. To combine these elements, one or more connection sets must be used. To get the required inlet
and outlet connection, the appropriate set of final plates should be used.
An example of FRL unit
5
1
1, 8
2
3, 6
4
5
7
2
6
final plates (set)

filter (FIL)
connection sets
regulating valve (REG)
mounting bracket to the wall
lubricator (LUB)
7
3
8
The direction of air flow must be compatible with the direction pointed by the
arrows on the elements.
series (size)
100
MW-9230301
MW-9230401
MW-9330501
-
200
300
connection
(BSP female)
400
connection set
MW-9330301
MW-9430301
final plates set *
MW-9330601
MW-9330701
MW-9330801
MW-9430701
MW-9530901
MW-9531001
-
MW-9630301
MW-9631001
MW-9631101
MW-9631201
MW-9631301
1/4"
3/8
1/2"
3/4"
1
1.1/4"
1.1/2"
2
* - with input and output connection
An example of FRL SKILLAIR 200 series unit consisting of:

- filter-reducer (FR) - adjustable in the range 0 12 bar, filtration 20 m and RMSA condensate drain,
- lubricator (LUB),
- final plates set with 1/2 connections and connection set.
final plates set
MW-9330801
filter-regulator (FR)
MW-3483011A
connection set
MW-9330301
lubricator (LUB)
MW-3481001A
1033

SKILLAIR series
FIL filter
Size:
Inlet pressure:
Working temp.:
Connection:
Condensate drain:
Flow rate:
FIL
100
element
series (size)
FIL - filter
100
200
300
400
100
code
type
RMSA
5 - 5 m
20 - 20 m
50 - 50 m
200
100, 200, 300, 400

5 m, 20 m, 50 m
Up to 15 bar
Up to +50C
1/4 2 BSP female thread
Manual / semi-automatic (RMSA)
Automatic (SAC)
- 100 and 200 series
Automatic (RA)
- 300 and 400 series
2000 l/min
- 100 series
3100 l/min
- 200 series
5300 l/min
- 300 series
16500 20000 l/min - 400 series
condensate drain
RMSA -
SAC -
RA
manual / semi-automatic
automatic for 100 and 200 sizes, using pressure
drop
automatic for 300 and 400 sizes, float type,
drainage independent of the flow and pressure
300
code
type
MW-3480001A
FIL 200
5 RMSA
400
code
type
MW-4480001A
FIL 300
5 RMSA
degree of
filtration
[m]
code
type
MW-3280001A
FIL 100
5 RMSA
MW-6180001A
FIL 400
5 RMSA
MW-3280002A
FIL 100
FIL 200
FIL 300
FIL 400
MW-3480002A
MW-4480002A
MW-6180002A
20 RMSA
20 RMSA
20 RMSA
20 RMSA
20
MW-3280003A
FIL 100
FIL 200
FIL 300
FIL 400
MW-3480003A
MW-4480003A
MW- 6180003A
50 RMSA
50 RMSA
50 RMSA
50 RMSA
50
MW-3280007A
FIL 100
5 SAC
MW-3480007A
FIL 200
5 SAC
MW-4480004A
FIL 300
5 RA
MW-6180004A
FIL 400
5 RA
MW-3280008A
FIL 100
20 SAC
MW-3480008A
FIL 200
20 SAC
MW-4480005A
FIL 300
20 RA
MW-6180005A
FIL 400
20 RA
20
MW-3280009A
FIL 100
50 SAC
MW-3480009A
FIL 200
50 SAC
MW-4480006A
FIL 300
50 RA
MW-6180006A
FIL 400
50 RA
50
1034
condensate
drain
RMSA
SAC / RA

SKILLAIR series
REG regulator
Size:
Inlet pressure:
Working temp.:
Connection:
Flow rate:
REG
100, 200, 300, 400

02, 04, 08, 012 bar
Up to 15 bar
Up to +50C
1/8 BSP female (1/4 for 400 series)
1600 l/min
- 100 series
3500 l/min
- 200 series
7000 l/min
- 300 series
18000 20000 l/min - 400 series
100
02
element
series (size)
REG - regulator
100
200
300
400
02 - 02 bar
04 - 04 bar
08 - 08 bar
012 - 012 bar
100
code
200
type
code
300
type
code
400
type
code
connection
type
REG 100
REG 200
REG 300
MW-3202001A
MW-3402001A
MW-4402000A
02
02
02
MW-3202002A
REG 100
REG 200
REG 300
MW-3402002A
MW-4402001A
04
04
04
MW-3202003A
REG 100
REG 200
REG 300
MW-3402003A
MW-4402002A
08
08
08
MW-3202004A
REG 100
REG 200
REG 300
MW-3402004A
MW-4402003A
012
012
012
outlet press.
range
02
MW-6102001A REG 400*
without
final
plates
04
08
0 12
* - additional pilot regulating valve (REG P) is required - it defines outlet pressure range
1035

SKILLAIR series
REG P pilot regulator
Size:
Inlet pressure:
Working temp.:
Connection:
Flow rate:
1/4
02, 04, 08, 012 bar
Up to 13 bar
Up to +50C
140 l/min
Pilot regulators are utilized when great accuracy in maintaining the set pressure is required under changing
operating conditions. Friction is almost eliminated therefore the valve features high accuracy and has low hysteresis.
Continuous air release is necessary to ensure proper operation. It is not a sign of malfunction. Typical for regulating
valves of large dimensions (400 series). It is recommended to use filtered air.
REG P
1/4
element
size
REG P - pilot regulator
1/4 - 1/4
02 - 02 bar
04 - 04 bar
08 - 08 bar
012 - 012 bar
code
type
MW-3206001
MW-3206002
MW-3206003
MW-3206004
REG P 1/4 02
REG P 1/4 04
REG P 1/4 08
REG P 1/4 012
02
connection
1/4 BSP
02
04
08
0 12
Direct pilot regulator assembly on SKILLAIR regulating valve
- Remove the pins C and D under the pilot

regulator.
- Check if two seals E and F under the pilot
regulator are in place.
- Fix the pilot regulator to the body of the
regulating valve using self-threading
screws G. Make sure that the arrows H
point in the same direction as the arrows
on the body of the regulating valve.
1036

SKILLAIR series
Size:
100, 200, 300
Outlet press. range: 02, 04, 08, 012 bar
Degree of filtration: 5 m, 20 m, 50 m
Inlet pressure:
Up to 15 bar
Working temp.:
Up to +50C
Connection:
1/4 1 BSP thread
Pressure gauge port: 1/8 BSP thread
Flow rate:
1600 l/min
- 100 series
3000 l/min
- 200 series
5600 l/min
- 300 series
FR
100
012
RMSA
element
series
degree of
filtration
outlet
press. range
condensate drain
FR - f filter - regulator
100
200
300
400
5 - 5 m
20 - 20 m
50 - 50 m
02* - 02 bar
04* - 04 bar
08 - 08 bar
012 - 012 bar
RMSA -
SAC -
RA
* - option
100
200
automatic for 100 and 200 sizes, using pressure
drop
automatic for 300 size, float type, drainage
independent of the flow and pressure
300
code
type
code
type
code
type
MW-3283007A
FR 100 5
08 RMSA
MW-3483007A
FR 200 5
08 RMSA
MW-4483004A
FR 300 5
08 RMSA
MW-3283031A
FR 100 5
08 SAC
MW-3483031A
FR 200 5
08 SAC
MW-4483013A
FR 300 5
08 SAC
MW-3283008A
FR 100 20
08 RMSA
MW-3483008A
FR 200 20
08 RMSA
MW-4483005A
FR 300 20
08 RMSA
MW-3283032A
FR 100 20
08 SAC
MW-3483032A
FR 200 20
08 SAC
MW-4483014A
FR 300 20
08 SAC
MW-3283009A
FR 100 50
08 RMSA
MW-3483009A
FR 200 50
08 RMSA
MW-4483006A
FR 300 50
08 RMSA
MW-3283033A
FR 100 50
08 SAC
MW-3483033A
FR 200 50
08 SAC
MW-4483015A
FR 300 50
08 SAC
MW-3283010A
FR 100 5
012 RMSA
MW-3483010A
FR 200 5
012 RMSA
MW-4483007A
FR 300 5
012 RMSA
MW-3283034A
FR 100 5
012 SAC
MW-3483034A
FR 200 5
012 SAC
MW-4483016A
FR 300 5
012 SAC
MW-3283011A
FR 100 20
012 RMSA
MW-3483011A
FR 200 20
012 RMSA
MW-4483008A
FR 300 20
012 RMSA
MW-3283035A
FR 100 20
012 SAC
MW-3483035A
FR 200 20
012 SAC
MW-4483017A
FR 300 20
012 SAC
MW-3283012A
FR 100 50
012 RMSA
MW-3483012A
FR 200 50
012 RMSA
MW-4483009A
FR 300 50
012 RMSA
FR 100 50
012 SAC
MW-3483036A
FR 200 50
012 SAC
MW-4483018A
MW-3283036A
FR 300 50
012 RA
outlet
press. range
[bar]
degree of
filtration
[m]
condensate
drain
RMSA
5
SAC / RA
RMSA
08
20
SAC / RA
RMSA
50
SAC / RA
RMSA
5
SAC / RA
RMSA
0 12
20
SAC / RA
RMSA
50
SAC / RA
1037

SKILLAIR series
LUB lubricator
Size:
Tank volume:
100, 200, 300, 400

50 cm3
- 100 series
95 cm3
- 200 series
160 cm3
- 300 series
800 cm3
- 400 series
Inlet pressure: Up to 15 bar
Connection:
Flow rate:
1500 l/min
- 100 series
3700 l/min
- 200 series
5500 l/min
- 300 series
18000 20000 l/min - 400 series
LUB
100
element
series (size)
STD
oil filling method
100
200
300
400
LUB - lubricator
STD
CA
CD
CAML -
CDML -
100
code
200
type
LUB 100
MW-3281001A
STD
MW-3281002A
MW-3281005A
1038
code
300
type
LUB 200
MW-3481001A
STD
LUB 100
CA
MW-3481002A
LUB 100
CD
MW-3481005A
standard version, oil refilling by disassembly of

the tank or through the cap
automatic refilling, refill only when lubricator is
working
vacuum refilling, pressure drop inside the tank
enables refilling.
automatic refilling with minimum level
vacuum refilling with minimum level
code
400
type
LUB 300
MW-4481001A
STD
LUB 200
CA
MW-4481002A
LUB 200
CD
code
connection
type
LUB 400
MW-6181001A
STD
LUB 300
CA
MW-6181002A
LUB 400
CA
MW-4481005A
LUB 300
CD
MW-6181004A
LUB 400
CD
MW-4481006A
LUB 300
CDML
MW-6181006A
LUB 400
CDML
MW-4481007A
LUB 300
CAML
MW-6181007A
LUB 400
CAML
oil filling
method
STD
CA
without
final
plates
CD
CDML
CAML

SKILLAIR series
Filter - F
- Versions: FIL100, FIL200, FIL300, FIL400
- Threaded connection: 1/4, 3/8, 1/2, 3/4, 1, 1.1/4,1.1/2, 2
- Nominal flow rate (at 6 bar, p = 0.5 bar): 1400 20 000 l/min
- Max. working pressure: 13 15 bar (depends on version)
Pressure regulator - R
- Versions: REG100, REG200, REG300, REG400
- Max. inlet pressure: 13 15 bar (depends on version)
Battery regulator
- Version: REG100
- Max. inlet pressure: 15 bar (depends on a version)
Each subsequent throttle valve can have a different set pressure , independent of the previous
valve. Working compressed air intake - from the pressure gauge port G1/8
Precision pressure regulator

- Threaded connection: 1/4
Pilot operated pressure regulator

- Version: regulating valve with Skillair 300 pilot
- Threaded connection: 1/2, 3/4, 1
- Outlet pressure range: depends on pilot valve
Advantages: low air load loss, excellent sensitivity
1039

SKILLAIR series
Pressure regulator - SKILLTRONIC
- Versions: SKILLTRONIC A and D, SKILLTRONIC 300A
and 300D, SKILLTRONIC 400A and 400D
- Threaded connection: 1/2, 3/4, 1, 1.1/4, 1.1/2, 2
- Outlet pressure range: 0.3 7 bar
- Operation voltage: 24V DC
Advantages: excellent repeatability, sensitivity and extremely fast response time
Pressure regulator with a filter - FR

- Versions: FR100, FR200, FR300,
- Max. inlet pressure: 13 15 bar (depends on version)
Lubricator
- Versions: LUB100, LUB200, LUB300, LUB400
- Threaded connection: 1/4, 3/8, 1/2, 3/4, 1, 1.1/4, 1.1/2, 2
- Nominal flow rate (at 6 bar, p = 0.5 bar): 1100 21000 l/min
- Various ways of filling with lubricant
Depurator - D
- Versions: DEP100, DEP200, DEP300, DEP400
- Threaded connection: 1/4, 3/8 , 1/2, 3/4, 1, 1.1/4,1.1/2, 2
- Degree of purification: 99.97%
- Degree of filtration: 0.01 m
Start-up valves
- Versions: V3V100, V3V200, V3V300, V3V400
- Nominal flow rate (at 6 bar, p = 0.5 bar): 1300 to 14000 l/min
- Max. working pressure: 13 to 15 bar (depends on a version)
- Min. inlet pressure (electrically controlled valves): 3 to 4 bar
- Control: manual, pneumatic, electrical
1040

SKILLAIR series
Soft-start valve
- Versions: APR100, APR200, APR300, APR400
- Min. inlet pressure (electrically controlled valves): 3 4 bar
- Control: pneumatic, electrical
Distributor
- Versions: PA100, PA200, PA300, PA400
Air preparation unit - FRL

- Versions: FRL100, FRL200, FRL300, FRL400
- Max. inlet pressure: 13 15 bar (depends on a version)

- Versions: FR+L100, FR+L200, FR+L300
- Unit elements: filter, regulating valve + lubricator
Air preparation unit - VFRL

- Versions: FRL100, FRL200, FRL300, FRL400
1041

SKILLAIR series
Air preparation unit - V+FR+L
- Version: V+FR+L100, V+FR+L200, V+FR+L300,
-Threaded connection: 1/4, 3/8, 1/2, 3/4, 1
- Nominal flow rate (at 6 bar, p = 0.5 bar): 300 2300 l/min (depends on a version)
- Max. working temp.: +50C

- Version: F+L100, F+L200, F+L300, F+L400
- Unit elements: filter, lubricator

- Version: F+D100, F+D200, F+D300, F+D400
- Unit elements: filter, depurator
1042

SYNTESI series
SYNTESI provides full modularity and flexibility that SKILLAIR series is known for. The application of threaded
metal connections and assembly sets have eliminated such traditional parts as draw bolts and connecting clamps.
Therefore the system has become more economical and simple.
Various elements of SYNTESI system can be combined with each other and with pneumatic system using hexagonal nickel brass bushes (B,J,K). The bushes are easy to remove by unscrewing the two front screws (C). At the
front and back of every SYNTESI unit there are 1/8 additional connections for e.g. pressure gauges (E), pressure
switches (F) or push-in connections (G). The connections enable independent intake of compressed air from any
particular element of air preparation unit. The elements of SYNTESI system can be mounted directly to the wall
using two M4 screws (H) or indirectly using a mounting bracket (I). A padlockable knob (L) for a manual control
shut-off valve, regulating valve and for filter-regulator can be used with one or two padlocks (M) securing from an
unintentional change of regulating valve settings or shut-off valve start.
Table of SYNTESI system accessories
description
nickel brass bushes (B) *
connection set (J,K) **
steel bracket (I)
padlock (M)
1/8
MW-9210001
1/4
MW-9210002
MW-9210000 , MW-5610P100
MW-9200701
MW-9062401
3/8
MW-9210003
* - with a connection (1 pc.) and 2 screws

** - with a connector and 4 screws
1043

SYNTESI series
FIL filter
Size:
Inlet pressure:
Working temp.:
Connection:
Condensate drain:
Flow rate:
1/8, 1/4, 3/8

5 m, 20 m, 50 m
Up to 15 bar
Up to +50C
Manual/ semiautomatic (RMSA)
Automatic float type (RA)
1300 l/min
- 1/8
1650 l/min
- 1/4
1750 l/min
- 3/8
FIL SY
RMSA
element
condensate drop
FIL SY - filter
5 - 5 m
20 - 20 m
50 - 50 m
RMSA - manual/semi-automatic
RA
- automatic, float type
The elements of SYNTESI system can be easily used to build FRL unit according to customer specifications. The
connection set and bushings facilitate assembly .
connection
[m]
code
type
MW-5610F100
FIL SY 5 RMSA
MW-5610F200
FIL SY 20 RMSA
20
MW-5610F300
FIL SY 50 RMSA
condensate drop
RMSA
50
without bushing
MW-5610F400
FIL SY 5 RA
MW-5610F500
FIL SY 20 RA
20
MW-5610F600
FIL SY 50 RA
50
1044
RA

SYNTESI series
REG regulator
Size:
Inlet pressure:
Working temp.:
Connection:
Flow rate:
1/8, 1/4, 3/8

02, 04, 08, 012 bar
Up to 15 bar
Up to +50C
1200 l/min
- 1/8
2800 l/min
- 1/4
3350 l/min
- 3/8
Instead of a flat membrane, SYNTESI pressure regulator employs a rolling membrane, which guarantees:
- greater nominal flow rate - a result of increased membrane stroke,
- quicker response to the change of settings - a result of reduced dynamic and static friction,
- greater accuracy in maintaining outlet pressure settings at variable flow rates and supply pressure.
If the outlet pressure rises above the set value, the membrane opens the relief valve and vents the regulator until
the pressure drops to the set level. The regulator has a push-lock mechanism which locks the knob in any position
when it is pushed down. A blocking plate enables padlock assembly, securing from an unintentional change of
outlet pressure setting. Additional 1/8 connections, one at the front and one at the back, can be used for pressure
gauges, pressure switches or push-in connections. The air taken in through these elements is appropriately reduced.
REG SY
02
element
REG SY - regulator
02 - 02 bar
04 - 04 bar
08 - 08 bar
012 - 012 bar
connection set and bushings facilitate assembly.
code
type
MW-5610R100
MW-5610R120
MW-5610R140
MW-5610R160
REG SY 02
REG SY 04
REG SY 08
REG SY 012
connection
without bushing
02
04
08
0 12
1045

SYNTESI series
Size:
Inlet press:
Working temp.:
Connection:
Flow rate:
1/8, 1/4, 3/8

02, 04, 08, 012 bar
5 m, 20 m, 50 m
Up to 15 bar
Up to +50C
1300 l/min
- 1/8
2000 l/min
- 1/4
3000 l/min
- 3/8
Filter-regulator combines the functions of filtration and pressure regulation in a single unit. It is made up of the
same elements forming the filter and the regulator so technical parameters are the same.
FR SY
012
RMSA
element
condensate drain
FR SY - filter - regulator
5 - 5 m
20 - 20 m
50 - 50 m
02* - 02 bar
04* - 04 bar
08 - 08 bar
012 - 012 bar
RMSA -
RA
-
automatic, float type
* - option
code
type
MW-5610B140
MW-5610B440
MW-5610B240
MW-5610B540
MW-5610B340
MW-5610B640
MW-5610B160
MW-5610B460
MW-5610B260
MW-5610B560
MW-5610B360
MW-5610B660
FR SY 5 08 RMSA
FR SY 5 08 RA
FR SY 20 08 RMSA
FR SY 20 08 RA
FR SY 50 08 RMSA
FR SY 50 08 RA
FR SY 5 012 RMSA
FR SY 5 012 RA
FR SY 20 012 RMSA
FR SY 20 012 RA
FR SY 50 012 RMSA
FR SY 50 012 RA
1046
connection
outlet pressure
range
[bar]
[m]
5
08
20
50
without bushing
5
0 12
20
50
condensate drain
RMSA
RA
RMSA
RA
RMSA
RA
RMSA
RA
RMSA
RA
RMSA
RA

SYNTESI series
LUB lubricator
Size:
Tank volume:
Input pressure:
Working temp.:
Connection:
Flow rate:
1/8, 1/4, 3/8

60 cm3
Up to 15 bar
Up to +50C
1600 l/min
- 1/8
3000 l/min
- 1/4
3650 l/min
- 3/8
LUB SY
STD
element
oil filling method

STD
LUB SY - lubricator
standard version, filling with oil through oil replenishment cap
code
type
connection
oil filling method
MW-5610L100
LUB SY
without bushing
STD
1047

Accessories - pressure gauge
Pressure gauge - M type
Size:
Measuring range:
Working temp.:
Diameter:
Casing material:
Shield material:
Filling:
1/8 1/4
04, 012 bar
Up to +50C
40, 50, 63 mm
Plastic
Aluminium
None (dry gauge)
General purpose pressure gauge mounted to reducers of BIT, NEW DEAL and SKILLAIR type. Its measuring
range should be selected according to working pressure so that it does not exceed 75% of max. scope. The scale
expressed in bar and PSI.
1048
40
1/8
04
element
shield diameter
connection
measuring range
M - pressure gauge
40 mm
50 mm
63 mm
1/8 - 1/8
1/4 - 1/4
04 - 0 4 bar
12 - 0 12 bar
code
type
shield diameter
[mm]
measuring range
[bar]
MW-9700101
MW-9700102
MW-9800101
MW-9800102
MW-9900101
M 40 1/8 12
M 40 1/8 04
M 50 1/8 12
M 50 1/8 04
M 63 1/4 12
40
50
63
0 12
04
0 12
04
0 12
INDUSTRIAL PNEUMATICS - actuators

Actuators
Pneumatic actuators are usually utilized as executing elements in pneumatic systems. Available in a single-acting
version (with a spring), double-acting and with a through-rod. In a single-acting version output position is forced by
the spring, and a change of piston position requires compressed air intake. In a double-acting version both feed
and return of the piston is obtained by compressed air. The actuators can be additionally equipped with magnets
used for Non-contact Piston Position Detection and stroke cushioning.
Special design cylinders, non-stick slip version, are used to ensure smooth regulation of work. Used at low piston
speed and transverse loads.
To prevent rotation of an actuator, it is recommended to use the piston rod of a special shape (TF actuator version)
or guides. Then the piston rod and elements that are fixed to it are at constant angle or can transfer specified torque.
All actuators are designed for operation with unlubricated air and do not require any maintenance. If lubricated air
is used, lubrication must be continuous because it replaces the factory-applied grease.
Construction of ISO 15552 actuator
1. Piston rod: C45 steel or stainless steel, thick chromed

2. Head: die cast aluminium
3. Piston rod seal: polyurethane, NBR or FKM/FPM
4. Guide bushing
5. Body: drawn anodised calibrated aluminium
6. Piston: self-lubricating technopolymer
7. Piston seal: polyurethane, NBR or FKM/FPM
8. Magnet: plastoferrite
9. Buffer + Static O-rings: NBR or FKM/FPM
10. Cushioning seal: polyurethane, NBR or FKM/FPM
11. Cushioning needle: OT 58 brass, with needle out movement safety system even when fully open
12. Screws: for assembly
1049

ISO 6432 mini-cylinders
ISO 6432 8 25 mm
Piston diameter: 8, 10, 12, 16, 20, 25 mm
Working stroke: Up to 500 mm
Working press.: From 0,8 up to 10 bar - 8 12 mm
From 0,6 up to 10 bar - 16 25 mm
101
102
106*
109*
110
111
112
113
112
12
0050
version
construction
piston
diameter
working
stroke
material
sealing
- SE axial connection
- DEM axial connection
- SE
- DEA
- DE
- SE
- DEM
- DEMA
O - standard
V - without head
nut
S - non-magnetic
G - non-stick slip
08**
10**
12**
16
20
25
up to
500 mm
A - piston rod:
C45 chrome
piston: aluminium
C - piston rod:
C45 chrome
piston: technopolymer
Z - piston rod and nut:
stainless steel
piston: aluminium
X - piston rod and nut:
stainless steel
N
P
V
B
- NBR
- polyurethane
- Viton***
- low
temperature***
* - available from 16mm piston diameter

** - stainless steel piston rod
*** - only for non-magnetic versions and with aluminium piston
SE - single-acting (magnetic), cushioned (101, 111), adjustable cushioning (106)
DE - double-acting (non-magnetic), cushioned
DEA - double-acting (non-magnetic), adjustable cushioning
DEM - double-acting (magnetic), cushioned (102, 112)
DEMA - double-acting (magnetic), adjustable cushioning
101
110
102
111
106
112
109
113
There are also economic versions of actuators (reduced weight) or versions made of stainless steel available.
1050

Round cylinder series RNDC
RNDC 32 50 mm
Piston diameter: 32, 40, 50 mm
Working press.: From 0,4 up to 10 bar - 32, 12 mm
From 0,3 up to 10 bar - 50 mm
111
32
0100
version
construction
piston
diameter
working
stroke
material
sealing
up to
500 mm
A - piston rod:
C45 chrome
piston: aluminium
C - piston rod:
C45 chrome
Z - piston rod and nut:
stainless steel
piston: aluminium
stainless steel
109
110
111*
112
113
- DEA
- DE
- SE
- DEM
- DEMA
O - standard
V - without head
nut
S - non-magnetic
G - non-stick slip
32
40
50
N
P
V
B
- NBR
- polyurethane
- Viton**
- low
temperature**
* - only for version with aluminium piston

** - only for non-magnetic versions and with aluminium piston
SE - single-acting (magnetic), cushioned (available only with aluminium piston)
DE - double-acting (non-magnetic), cushioned
DEM - double-acting (magnetic), cushioned
109
112
110
113
111
Actuators made of stainless steel are also available.
1051

ISO 15552 cylinders
ISO 15552 type A 32 125 mm
Piston diameter: 32, 40, 50, 63, 80, 100, 125 mm
Working press.: From 0,4 up to 10 bar - 32,40 mm
From 0,3 up to 10 bar - 50, 63 mm
From 0,2 up to 10 bar - 80 125 mm
121
A1
0100
version
construction
piston
diameter
121 - DEMA
124 - DEM
126* - SE
A - standard
B - non stick slip
C non-magnetic
32
40
50
63
80
A1 - 100
A2 - 125
working
stroke
material
sealing
up to
2800 mm
A - piston rod:
C45 chrome
piston: aluminium
(standard for 80 mm)
C - piston rod:
C45 chrome
(standard for 63 mm)
Z - piston rod and nut
stainless steel
piston: aluminium
stainless steel
N
P
V
B
- NBR
- polyurethane
- Viton**
- low
temperature**
* - available up to 63, only with aluminium piston

** - available only for non-magnetic versions and with aluminium piston
SE - single-acting (magnetic), adjustable cushioning
121
124
126
There are also economic versions of actuators (reduced weight) or versions made of stainless steel available.
1052

ISO 15552 cylinders
ISO 15552 160 200 mm
Piston diameter:
Working stroke:
Working press.:
Working temp.:
160, 200, mm
From 25 to 2800 mm
Up to 10 bar
W121
160
0050
version
piston diameter
working stroke
160
200
XA3
XA4
W120 - DEA
W121 - DEMA
W124 - DEM
VA3
VA4
KA3
KA4
- piston rod: C45 chrome

- seal: NBR
- seal: NBR
- 160 mm
- piston rod stainless steel
seal: NBR
- 200 mm
seal: NBR
- 160 mm
seal: FKM/FPM
- 200 mm
seal: FKM/FPM
- 160 mm
seal: FKM/FPM
- 200 mm
seal: FKM/FPM
from 25 to 2800 mm

120
121
124
1053

Actuators
Mini actuator 6 16 mm - CRTC series
- Piston diameter: 6 - 10 - 16 mm
- Standard stroke length: 5, 10, 15 mm
- Threaded connection: M5
- Seals: NBR
- Versions: single-acting
- O-ring seal enables assembly directly in the machine body
Short-stroke actuator 12 100 mm - SSCY series

- Piston diameter: 12 100 mm
- Standard stroke length: 5 150 mm (depends on a version)
- Cushioning in end-of-stroke positions adjustable on both sides
- Seals: NBR, polyurethane, Viton
- Versions: single or double-acting, with a through-rod, protection against rotation,
magnetic position sensors (standard), with a built-in oscillating flange
- Assembly set
Compact actuator 12 100 mm - CMPC series

- Single or double-acting with extended or retracted piston rod, with a through-rod,
protection against rotation
- Seals: polyurethane
- Fixing holes spacing according to: ISO 6431-VDMA 24562, NFE 49-004-1 and 2
- Can be mounted in series of 2, 3 or 4 actuators (multi-actuator units)
- Multi-position units (with 2, 3 stages) can be formed
- Assembly set
Actuator with double piston rod 32 100 mm - TWNC series

- Standard stroke length: 25 500 mm
- Axial dimensions according to ISO 6431
- Seals: NBR, polyurethane
- Versions: double-acting, with a single or twin through-rod,
magnetic position sensors (standard)
- Assembly set
Rotary actuator 32 100 mm - R1 series

- Standard rotation angle: 90, 180, 270, 360 with mechanical stroke adjustment
- Magnetic position sensors
- Seals: NBR
- Driving shaft with male pinion or female hole
- Construction: pinion - rack mechanism
- Special versions: on request
1054

Actuators
- Piston diameter: 12 - 16 - 20 - 25 mm
- Standard rotation angle: 90, 180 with mechanical stroke adjustment
(except for the smallest size)
- Compact structure (e.g. dimensions of the smallest model 46x65x28 mm)
- Construction: drive with a double piston with a rack
Rotary actuator 16 40 mm, R3 series

- Piston diameter: 16 - 20 - 22 - 25 - 30 - 40 mm
- Adjustable rotation angle: 0 180
- Versions: mechanical control of end-of-stroke positions, with hydraulic cushioning

- Adjustable rotation angle: 0 180 (accuracy of adjustment +/-5)
- Versions: mechanical control of end-of-stroke positions,
rotary connection with 4 ports can be installed in a pinion
- Construction: pinion - rack mechanism
- Service life: over 2 million cycles
Rotary actuator TECNO - R5 series

- Adjustable rotation angle: 0 180 (accuracy of adjustment +2)
- Versions: hydraulic cushioning in end-of-stroke positions
- Weight: 0.53 kg (polymer material)
Hydraulic brake BRK series for ISO 6431 40 - 80 mm actuators

- Braking force: 6000 N (standard version), 5000 N (version with valves)
- Speed: 10 6000 mm/min
- Seals: NBR
- Versions: with a throttle valve, a check valve, with both valves, with shut-off valve
- Construction: for operation with actuators according to ISO 6431
1055

Grippers
Grippers with 2 parallel jaws - P1 series
- Gripper type: two-jaw, with jaws in parallel arrangement
- Construction: double-acting, with magnetic position sensors (on request)
- Piston diameter: 16 - 20 -32 mm
- Seals: NBR
Grippers with parallel jaws - P2 series

- Construction: double-acting, with magnetic position sensors
(except for the smallest size), for internal and external gripping
- Piston diameter: 6 - 10 - 16 - 20 - 25 mm
- Maximum operating frequency: 2 cycle/sec
- Single jaw stroke: 2 7 mm (depends on size)

- Construction: double-acting, with structural reinforcement,
for internal and external gripping, with jaws position control
- Gripping force (per jaw at 6 bar): 50 750 N (depends on size)
- Repeatability: 0.01 0.02 mm (depends on size)
- Operation of 1 500 000 cycles without any maintenance is guaranteed
- Max. jaw length: 50 125 mm (depends on size)
- Special versions: on request

- Gripper type: two-jaw, with jaws in parallel arrangement, with long stroke
- Construction: double-acting, for gripping bulky objects,
for internal and external gripping, with jaws position control (except for the smallest size)
- Single jaw stroke: 5 60 mm (depends on version)
- Maximum operation frequency: 1 cycle/sec
Grippers with parallel jaws - P5 series TECNO

- Gripper type: two-jaw, with jaws in parallel arrangement, with long stroke
- Construction: double-acting, for gripping bulky objects,
for internal and external gripping, with jaws position control,
made of polymer materials, for operations with TECNO series actuators
- Operation of 1 500 000 cycles without any maintenance is guaranteed
- Single jaw stroke: 5 mm
- Repeatability: 0.05 mm
- Weight: 0.15 kg
1056

Grippers
Grippers with angular jaws - P6 series
- Gripper type: two-jaw, with jaws in angular arrangement
- Construction: double-acting, with magnetic position sensors (on request),
for internal and external gripping
- Seals: NBR
- Gripping force (per jaw at 6 bar): 15 70 N (depends on the size)
- Jaw opening angle: 30, 160

- Construction: double-acting, with magnetic position sensors,
and a slot to fit the position sensors in
- Jaw opening angle: 30
- Seals: NBR, polyurethane

- Construction: single-acting, normally open, with magnetic position sensors,
corrosion resistant, made of diamagnetic material
- Gripping force (per jaw at 6 bar): 25 80 N (depends on the size)
- Jaw opening angle: 8

- Construction: double-acting, with magnetic position sensors (on request),
for internal and external gripping
- Seals: NBR
- Jaw opening angle: max. 160, opening angle can be adjusted

- Construction: with magnetic position sensors, for external gripping
- Jaw opening angle: 20 180, opening angle can be adjusted
with 1 accuracy (for each jaw)
- Service life: over 2 million cycles without any maintenance
- Repeatability: 0.1 mm
1057

Grippers
- Gripper type: three-jaw, with jaws in parallel arrangement
- Construction: double-acting, with magnetic position sensors, for internal
and external gripping, version with four self-centering jaws available on request
- Piston diameter: 16 - 20 - 25 - 40 - 60 - 80 mm
- Closing force (per jaw at 6 bar): 58 1500 N (depends on size)
- Opening force (per jaw at 6 bar): 65 1700 N (depends on size)
- Max. operation frequency: 1.5 to 1.2 cycle/sec. (depends on size)
Gripper with parallel jaws - P12 series

- Gripper type: three-jaw, with jaws in parallel arrangement
for internal and external gripping, with self-centering jaws, of excellent accuracy
- Single jaw stroke: 4 10 mm (depending on size)
- Service life: over 1 500 000 cycles without any maintenance
- Repeatability: 0.01 0.05 mm (depends on size)
1058

Guide units
Guide units - S7 series
- Type: heavy duty guide unit
- Designed for: rigid and stable support for 32 actuators according to ISO 6431,
and for 25 rodless actuators, used in the case of very long strokes
- Stroke length: 25 2000 mm (on request - 4000 mm)
- Versions: with adjustable stroke stop, hydraulic cushioning,
with protection against dust, with position sensors, with interface plates

- Type: guide with double-acting actuator
- Construction: with in-line ball bearings, with re-circulation ball bearings,
with magnetic position sensors
- Stroke length: 25 2000 mm (on request - 4000 mm)
with adjustable pneumatic cushioning

- Type: ball guide with double-piston drive
- Construction: double-acting, with magnetic position sensors
- Stroke length: 75 250 mm (depends on size)
- Max. piston speed: 50 500 mm/s
- Versions: with adjustable stroke stop, hydraulic cushioning

- Type: TWIN double-acting actuator
- Construction: with magnetic position sensors, with slide or ball bearings
- Piston diameter: 2x12 - 2x16 - 2x20 - 2x25 - 2x30 mm
- Stroke length: 15 to 125 mm (depending on size)
- Max. piston speed: 30 to 100 mm/s
- Versions: with adjustable stroke stop, hydraulic cushioning

- Construction: with magnetic position sensors,
with slide or ball bearings with a double through-rods
- Piston diameter: 2x12 - 2x16 - 2x20 - 2x25 - 2x30 mm
- Stroke length: 25 150 mm (depends on size)
- Max. piston speed: 30 200 mm/sec
with double-sided hydraulic cushioning
1059
INDUSTRIAL PNEUMATICS - actuators and grippers

Guide units
- Construction: with magnetic position sensors, with slide or ball bearings
with a double through-rod, compressed air ports at the end plate of the piston rod
- Piston diameter 2x12 - 2x16 - 2x20 - 2x25 - 2x30 mm
- Stroke length: 25 150 mm (depends on the size)
- Max. piston speed: 30 200 mm/s
- Versions: with adjustable stroke stop, hydraulic cushioning, with double-sided
hydraulic cushioning

- Type: rodless actuator with mechanical coupling
- Construction: double-acting, with magnetic position sensors, cushioning
in end-of-stroke positions adjustable on both sides
- Stroke length: 100 5700 mm
- Seals: NBR, Viton (depends on piston speed)
- Exploitation of unlubricated compressed air also possible

- Type: rodless TWIN actuator with mechanical coupling
cushioning in end-of-stroke positions adjustable on both sides
- Piston diameter: 2x16 - 2x25 - 2x32 mm
- Stroke length: 100 5700 mm
1060
MACHINES AND ACCESSORIES - hose assembly production

PROCESS OF CRIMPING HIGH PRESSURE HOSE ASSEMBLIES
The manufacturing process of flexible hose assembly consists of several stages. Each stage is carried out by the
use of special tools/machines. Even in the smallest workshop such a set of equipment makes a technological line
described in the table below:
MATERIALS:
- hydraulic hoses,
- fittings,
- ferrules
CUTTING:
- cutting
machines
SKIVING:
- skiving tools
PLACING OF
FITTINGS AND
FERRULES ON
THE HOSE
CRIMPING
- hydraulic crimping
machines
VERIFICATION
- dimension
checks after
crimping
- pressure
testing
COMPLETE
HYDRAULIC
HOSE
ASSEMBLIES
The steps of the hydraulic hose assembly production process:

1. Measuring the length of a hose (several types of tools can be used).
2. Cutting the required length. Cutting is performed on electrically driven cutting machines with smooth or toothed
special steel blades.
3. Skiving of external or internal rubber layer of hose skive in a ferrule area - if the hose type requires such an
operation. The skiving is performed on skiving machines equipped with special skiving tools that are adjusted
to the hose diameter.
4. Inserting ferrules on the hose (manually).
5. Inserting fittings on the hose. It is performed manually or with the use of special tools or equipment.
6. Crimping process. The most important stage of the whole hose assembly process. It is performed on hydraulic
crimping machines with a manual, electrical or pneumatic drive.
7. Hose assembly testing. Taking into account customer requirements it may include:
- measuring outside diameter of the ferrule after crimping,
- checking the internal bore collapse of the fitting after crimping,
- pressure testing with pressure 1,5 to 2 times higher than the hose working pressure. Performed in special test
benches,
- pressure testing of one hose assembly chosen from a production batch until it bursts. Performed in special
test benches.
8. An extra stage of hose assembly process can be introduced - cleaning of the inside of the hose. It is performed
on customer request using special equipment and methods e.g. shooting cleaning projectiles through the hose
using compressed air or standard methods like water slushing.
9. Marking of the hose assembly to facilitate future recognition. Performed according to particular requirements,
usually inscribing information of the producer, date of production and working pressure on the ferrule.
Hose assembly production process described above, refers to the average production line.
CRITERIA FOR EQUIPMENT SELECTION

The most basic issues we have to consider when
planning to purchase equipment for a complete
assembly line are as follows:
- size (inside diameter) of manufactured hose
assemblies - what is the biggest inside diameter
that we need a machine for?
- type of manufactured hoses - e.g. hoses with 1
or 2 braids, non-skived only, etc.
- the amount of hoses that we want to manufacture,
e.g. 500 pcs/week,
- production homogeneity level - whether frequent
hose type changes are to take place?
- financial resources.
A sample stand for hose assembly production for a
small workshop is presented on the left.
1061

Crimping machines for low pressure hoses
ECKSTEIN PW 4-8
The small crimping device designed to crimp hoses with textile

reinforcement with EC type ferrules. Crimping is carried out using a
table top vice. Operation production range (internal hose diameter)
about 5 10 mm.
EC-PW-4-8
ECKSTEIN PWZ
EC-PWZ
The clamping pliers designed to crimp hoses with textile

reinforcement with EC type ferrules. Due to the construction of the
pliers it is possible to crimp in places that are not easily accessible.
Complete with three sets of dies as a standard.
Operation production range (internal hose diameter) about 5 10 mm.
EC-UPS-1
ECKSTEIN UPS 1
Manual crimping machine designed to crimp hoses with textile

reinforcement with EC type ferrules. Complete with two sets of dies
as a standard. A wide range of special purpose dies is also available.
Operation production range (internal hose diameter) about 4 18 mm.
OP-TUB-H25
TUBOMATIC H25, H25 PI
Crimping machines designed to crimp low pressure hoses. Complete

with three sets of dies. Operational production range (internal hose
diameter): 10 25 mm.
Drive: manual (H25),

pneumatic - maximum pressure 7 bar (H25 PI).
OP-TUB-H25PI
1062

Hydraulic crimping machines - service
Tubes International is the only authorized distributor of FINN-POWER
crimping machines in Poland. We offer technical advice, sale,
training, warranty and after warranty service.
FP-P16HP
FP-P20HP
FP-P16AP
FP-P20AP
FP-P20CS
code
FP-P16HP
FP-P20HP
FP-P16AP
FP-P20AP
FP-P20CS
FP-P32CS
FP-P32CS
max. internal
hose diameter
[inch]
1
1.1/2 (1.1/4*)
1
1.1/2 (1.1/4*)
1.1/2 (1.1/4*)
2 (1.1/2*)
crimping
diameter range
[mm]
10 45
10 61
10 45
10 61
10 61
10 87
max. dies
opening
[mm]
+20
+25
+20
+25
+25
+33
FINN-POWER P16 HP, P20 HP

Hydraulic crimping machines operated
by a hand pump are designed for
repair workshops, service units,
service vans, etc. Robust construction
and low weight make it an ideal
solution when repairs have to be done
on-site. There is an electric indicator
showing the crimped diameter for
P16HP and mechanical one for
P20HP. The P20HPL version with
electric indicator is also available. The
crimping head of P20HP can be set
either on the right or on the left side.
FINN-POWER P16 AP, P20 AP
Hydraulic crimping machines operated
by a pneumatic pump designed for
repair workshops, service units, etc.
There is an electric indicator showing
the crimped diameter for P16AP
and mechanical one for P20AP.
Compressed air consumption 570
l/min (P16AP), 400 l/min (P20AP),
pressure about 6 7 bar.
FINN-POWER P20 CS, P32 CS

Crimping machines operated by
an electric engine 1,6 kW fed from
a battery 12 V (or 24 V). It is an
essential piece of equipment in
service vans. The crimping diameter
is set by turning a 10-turn vernier
dial of MS control and shown by an
electric indicator when reached. The
crimping head can be set either on
the right or on the left side.
crimping
force
[T]
95
137
95
137
137
200
theoretical
effectiveness
[crimps/hour]
250
150
weight
[kg]
26,00
66,00
28,00
59,00
83,00
125,00
* - for 4 braid hoses
1063

Hydraulic crimping machines - service and production
FP-P20MSN
FP-P20X
FP-P21MS
FINN-POWER P20 X, P20 (MS, UC versions), P21 (MS, UC versions)

The P20 crimping machine in a basic solution for service and medium-size production in repair workshops as
well as for medium-size plants making hydraulic hose assemblies. Driven by a three-phase electric motor 3 kW
(400 V). The P20X crimping machine is a version of the P20 with simplified hydraulic system driven by a onephase electric motor 1.5 kW (230 V), designed for single-piece production of hose assemblies. The P21 crimping
machine is a version of the P20 but with special crimping head construction that facilitates crimping of elbow fittings,
recommended for production of large numbers of non-standard fittings.
FINN-POWER P32 (MS, UC versions)

Basic crimping machines for service and production in repair workshops
as well as for medium-size plants making hydraulic hose assemblies.
The crimping head is bigger than the one of the P20 version and allows
to crimp hydraulic hoses up to 2 inside diameter. Driven by a threephase electric motor 4 kW (400 V). A simplified version P32X is also
available.
FP-P32UCN
FP-P51UC
code
FP-P20X
FP-P20MSN (UCN)
FP-P21MS (UC)
FP-P32MSN (UCN)
FP-P32X
FP-P51MS (UC)
FP-P60UC
max. internal
crimping
hose diameter diameter range
[inch]
[mm]
1.1/2
10 61
1.1/2 (1.1/4*)
10 61
1.1/2 (1.1/4*)
10 61
2 (1.1/2*)
10 87
2 (1.1/2*)
10 87
2.1/2 (4**)
10 87
2.1/2 (4**)
10 87
* - for 4 braid hoses

** - for industrial hoses
1064
FINN-POWER P51 (MS, UC versions), P60 (UC)

The biggest of the tabletop machines range. Due to the special crimping
head construction (no longitudinal movement of the dies) positioning and
crimping of hose assemblies is much easier and accurate. When dies
with large crimping range are applied it is possible to crimp industrial
hoses up to 4 inside diameter. Driven by a three-phase electric motor 4
kW (400V). Designed for plants and workshops manufacturing hydraulic
hose assemblies with larger diameters.
The P60 crimping machine with its main advantage of large dies opening
is ideal for crimping industrial hoses.
max. dies
opening
[mm]
+25
+25
+34
+33
+33
+46
+64
crimping
force
[T]
137
137
137
200
200
280
260
theoretical
effectiveness
[crimps/hour]
340
850
850
850
230
720
720
weight
[kg]
110,00
157,00
186,00
205,00
150,00
260,00
260,00

Hydraulic crimping machines - series production
FINN-POWER crimping machines FP
series, are a series production crimping
machines serving the industry for dozens
of years by crimping flexible hydraulic hose
assemblies as well as big bore industrial
hose assemblies.
FP-FP120UCN
FP-FP20UC
FINN-POWER new generation crimping machines benefits:
- New UC control, with extended set of features (e.g. die position display) ensures more user friendly and effective
operation process.
- Operating unit and functional buttons with free placing (according to operator choice).
- Side mounting rack for die sets, side table and other accessories.
- New, improved hydraulic drive directly connected to crimping machine or as a separate unit placed in some
distance thus enabling more operational space.
- Durable housing made of resistant plastic panels easy to disasseble without the need of tools usage. It keeps
the machine safe and allowes for fast meintenance works.
- Motor stand-by function.
Depending on the type, FINN-POWER crimping machines FP series are manufactured in steel housing with UC
control (FP20) or as a new generation crimping machines in plastic housing with UC control (FP120 (S), FP140
(S) and FP145).
max. internal
hose diameter
[inch]
1.1/2
crimping
diameter range
[mm]
10 61
max. dies
opening
[mm]
+68
crimping
force
[T]
150
theoretical
effectiveness
[crimps/hour]
2300
motor
power
[kW]
3
FP-FP120UCN
FP-FP120SUCN
2
2
10 87
+68
+68
280
280
2400
3000
5,5
7,5
FP-FP140UCN
FP-FP140SUCN
2.1/2 / 4*
2.1/2 / 4*
10 124
+82
+82
320
320
2000
2500
5,5
7,5
FP-FP145UCN
2.1/2 / 4*
10 124
+82
350
2400
7,5
code
FP-FP20UC
* - for industrial hoses
1065

Hydraulic crimping machines - heavy duty production
FP-FP170(175)UC
FP-FP160(165)UC
FINN-POWER FP160 (165) (UC version)

Crimping machines for series production, especially suitable to crimp big bore hoses (maximum inside diameter of
crimped hose 6 - DN150). Operated by an electric 5.5 kW (400 V) motor. The foot pedal is supplied as a standard.
The FP160 and FP165 crimping machines have been used for years by manufacturers of high pressure hydraulics,
industrial hoses, in shipyards and in the construction of oil rigs.
FINN-POWER FP170 (175) (UC version)
The FP170 and FP175, Finn-Powers Titans, are ideal to crimp hose fittings of large bore hoses (maximum inside
diameter of crimped hose 10 - DN250), to reduce diameter of big pipes or join big elements through crimping. The
crimping force up to 830 T (FP175).
code
FP-FP160UC
FP-FP165UC
FP-FP170UC
FP-FP175UC
max. internal
hose diameter
[inch]
6
6
10
10
FP-SP350UC
crimping
diameter range
[mm]
10 202
10 202
10 320
10 320
max. dies
opening
[mm]
+125
+125
+155
+155
crimping
force
[T]
350
500
660
830
theoretical
effectiveness
[crimps/hour]
1800
1260
1160
1140
weight
[kg]
2000/225
2460/225
4280/245
4400/310
FINN-POWER
SP 100, 100Z, 350, 350S, 1200 (w. UC)
The special design crimping machine allows the hose to be fed from
the side. Enables to crimp elaborately shaped and angled hose
assemblies (e.g. in automotive industry).
-
1066
hydraulic hose size: up to 1.1/4

standard crimping diameter range: 10 to 54 mm
maximum dies opening: +25 mm
maximum feeding channel height: 63 mm (SP 1200)
maximum crimping force: 35 T (SP 350), 120 T (SP 1200)
theoretical effectiveness: 480 crimps / hour (SP 350),
950 (SP 350S), 420 (SP 1200).

Hydraulic crimping machines
(for low pressure hoses and cables)
FP-CC22UC
FP-NC20UC
These machines are designed to crimp flexible low pressure hose assemblies with fittings that do not demand large
crimping force (rubber hoses without any or with textile reinforcement, in steel wire braid, PTFE hoses - crimped
with ferrules made of steel or aluminium sheet). High production effectiveness achieved through an optimal force
and speed ratio. The crimping machines of this series can also be used to crimp fittings of wires, cables and nuts
of hydraulic fittings.
code
FP-CC22UC
FP-CC24UC
FP-NC20UC
FP-NC30UC
FP-NC40UC
hose
size
[inch]
1.1/4
1.1/4
-
crimping
diameter range
[mm]
10 54
10 61
12 49
12 63
12 105
max. dies
opening
[mm]
+25
+25
+18
+26
+26
crimping
force
[T]
68
130
50
66
93
theoretical
effectiveness
[crimps/hour]
1700
1280
2100
2400
2700
weight
[kg]
dies
type
125,00
178,00
220,00
240,00
240,00
CC22, P20
P20
NC20
NC30
NC40
FINN-POWER crimping machines are widely used in

many branches of industry for different purposes except
crimping hose assemblies. Those applications include:
crimping of cables, electric insulators, reducing pipe
diameters, forming metal elements.
For more information regarding crimping machines
please contact Technical Department of TUBES
INTERNATIONAL.
1067

Quick die change system for FINN-POWER crimping machines
Additional accessories available for P type tabletop series of crimping machines are quick die change systems
consisting of quick change tool base (QC-Tool Base) with storage place for dies (photo 1) or die set rack (photo
2) and magnetic quick change tool (QC-Tool) that allows to change out a set of dies at once (photo 3). Crimping
machines of FP series are supplied with the QC system as a standard.
photo 2
photo 1
photo 3
code
description
FP-QCT-20X
FP-QCT-20
FP-RACK-20
FP-RACK-32
FP-QCT-51
FP-QCTN-20
FP-QCTN-32
tool base for P20X with magnetic quick change tool

tool base for P20 / P21 with magnetic quick change tool
die set rack type 20 with magnetic quick change tool
die set rack type 32 with magnetic quick change tool
tool base for P51 / P60 with magnetic quick change tool
tool base for 20 MS(UC) with magnetic quick change tool
tool base for 32 MS(UC) with magnetic quick change tool
Control options of FINN-POWER crimping machines

MS(N)
New control solution available in new generation of crimping

machines P20 MSN and P32 MSN replacing MS and IS control.
Apart from two button operation (crimping - opening) the crimping
machine can be operated with foot pedal (option), using automatic
backstop (option) or in semi-automatic mode. Equipped with motor
stand-by function.
1068

UC
New version of control option used in most of new generation of

FINN-POWER crimping machines intended for series production
of hose assemblies. It is an upgraded version of VS control option.
PACKAGE II
MULTISTAGE CRIMPING
STANDARD VERSION
MOST IMPORTANT FEATURES
- crimping according to set diameters

or pressure rating,
- includes features of PACKAGE I.
crimping according to set diameter,

data transfer through USB port,
manual or automatic operation mode
graphical user friendly interface,
indicator of current crimping diameter,
motor stand-by function,
control options extensions available,
through additional packages.
PACKAGE I
PACKAGE III
CRIMPING ACCORDING TO
SET PRESSURE VALUE
PRODUCTION PROCESS MONITORING
- ideal for crimping hoses with wide tolerance

dimensions or materials sensitive to crimping.
- data transfer through USB/FTB connection,

- includes features of PACKAGE II.
1069

MS
Basic control solution for crimping machines intended for single-piece

production in repair workshops. Steering with two push-buttons:
closing - opening.
The crimping diameter is set by turning a 10-turn vernier dial situated
on the head of a crimping machine.
IS
IS control solution is ideal for series crimping and single-piece

production. The crimping diameter is set by a 10-turn vernier dial
placed on the control panel. Adjustable opening diameter of dies.
The dies can also be kept closed (for 2 sec.). Operation in the
following modes:
- manual (using two push-buttons - as in MS version),
- semi-automatic (one push-button - closing and opening),
- automatic - using automatic backstop placed behind the head.
Crimping starts when an assembly with a fitting is pushed against
the backstop. Automatic backstop is supplied as a standard.
VS
VS control solution is designed for full-scale production of various

kinds of assemblies. The functions and operation modes are
the same as for IS version, with two functions added: crimping
diameter can be corrected and the dies can be kept closed for
adjustable period of time (up to 5 sec.). The operation is controlled
by digital system on the display. The VS control version can store
configurations of crimping parameters for immediate recall.
Note:
In 2010 onwards, IS and VS control versions were replaced by UC
control.
Accessories and maintenance materials

code
FP-691417
FP-691418
FP-691563
FP-043167
FP-019302
1070
description
mechanical backstop for P20 / P21 MS
mechanical backstop for P32 MS
steering foot pedal for 145 / 140 / 120 / FP20 /
P60 / P51 / P21 / CC24 / CC22
oil filter insert P20 / P32 / P51
grease for crimping machines - package 400g

Crimping dies for
FINN-POWER machines
All FINN-POWER crimping machines are adapted
to work with exchangeable die sets. These die sets
are not supplied with machines as a standard must be ordered separately according to customer
requirements. A wide range of special die sets of
virtually any dimension or shape but also marking
dies for ferrules are available on request.
* - long dies, sample code: FP-20-16L.
16 type
code
FP-16-10
FP-16-12
FP-16-14
FP-16-16
FP-16-19
FP-16-23
FP-16-27
FP-16-31
crimping diameter
[mm]
10 12
12 14
14 16
16 19
19 23
23 27
27 31
31 38
140 (140L) type

LxD
[mm]
55x39
FP-20-10
FP-20-12
FP-20-14
FP-20-16*
FP-20-19*
FP-20-23*
FP-20-27*
FP-20-31*
FP-20-36
FP-20-41
FP-20-47
FP-20-54
crimping diam. LxD 20 type LxD 20L type

[mm]
[mm]
[mm]
10 12
12 14
14 16
55x84
16 19
19 23
23 27
75x84
27 31
70x84
31 36
36 41
75x84
41 47
47 54
85x84
54 61
32 (32L) type
code
FP-32-10
FP-32-12
FP-32-14
FP-32-16
FP-32-19
FP-32-22
FP-32-26
FP-32-30
FP-32-34
FP-32-39
FP-32-45
FP-32-51
FP-32-57
FP-32-63*
FP-32-69*
FP-32-74*
FP-32-78*
160 type
65x39
20 (20L) type
code

[mm]
[mm]
[mm]
FP-140-84*
84 92
FP-140-92*
92 100
FP-140-100*
100 108
110x140
120x140
FP-140-108*
108 116
FP-140-116*
116 124
code

[mm]
[mm]
[mm]
10 12
12 14
14 16
55x99
16 19
19 22
22 26
26 30
70x99
30 34
34 39
75x99
39 45
45 51
90x99
51 57
57 63
100x99
63 69
69 75
110x99
120x99
74 80
78 87
crimping diameter
[mm]
84 92
92 100
100 108
108 116
116 126
126 136
136 146
146 156
156 166
166 178
178 190
190 202
code
FP-160-084
FP-160-092
FP-160-100
FP-160-108
FP-160-116
FP-160-126
FP-160-136
FP-160-146
FP-160-156
FP-160-166
FP-160-178
FP-160-190
LxD
[mm]
116x220
170 type
crimping diameter
[mm]
205 220
220 235
235 250
250 270
270 290
290 320
code
FP-170-205
FP-170-220
FP-170-235
FP-170-250
FP-170-270
FP-170-290
LxD
[mm]
220x220
Selection table of dies for crimping machine

crimping
machine type
P16
P20, P21
CC22, CC24
P32
P51, P60
FP20
FP120
FP140
FP145
FP160, FP165
FP170, FP175
16
X
dies type
20 20L 32 32L 140 140L 160 170
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
1071

Hose cutting machines
OP-CTF1/E
TF 1/E
Cutting machine developed to cut hydraulic hoses with 1, 2 and 4

braids of up to 1.1/4 and with 6 braids of up to 1. Used in workshops
and service vans.
- maximum hose outside diameter: 60 mm,
- operated by: three-phase 1,1 kW,
optionally 12 V (battery powered),
- toothed cutting blade: 250 mm (2900 r.p.m.),
- weight: 31 kg,
- can be connected to external fume removal system.
OP-CTF1/ECO
TF 1/ECO

braids of up to 1 in diameter.
Used in workshops and in small scale series production.
- operated by: three-phase 0,75 kW (400 V),
optionally 12 V (battery powered),
- weight: 28 kg,
- can be connected to external fume removal system.
OP-CTF2
TF 2

braids of up to 2 and with 6 braids of up to 1.1/2 in diameter.
Used in workshops and in small scale series production.
- operated by: three-phase 3 kW (400 V),
- weight: 130 kg,
- can be connected to external fume removal system,
- optional accessories: measuring scale table 2.7 m, centring device,
hose meter counter, stroke counter.
OP-CTF2/E
TF 2/E

braids of up to 2 and with 6 braids of up to 1.1/2 in diameter. Used
in workshops and in small scale series production.
- operated by: three-phase 3 kW (400 V),
- weight: 44 kg,
- optional accessories: centring device, hose meter counter, stroke
counter.
1072

OP-CTF3
TF 3
Cutting machine developed to cut hydraulic hoses with 1, 2 braids

of up to 3 in diameter and with 4, 6 braids of up to 2 in diameter.
Used for series production.
- operated by: three-phase 5.5 kW motor (400 V),
- weight: 187 kg,
- optional accessories: measuring scale table 2.7 m, centring device,
hose meter counter, stroke counter.
Cutting machine also available with pedal equipped pneumatic
control of hose being cut.
OP-CTF4
TF 4
Cutting machine developed to cut hydraulic hoses with 1, 2 braids

of up to 3, with 4 braids of up to 2.1/2, with 6 braids of up to 2
and flexible industrial hoses of up to 3 in diameter.
- operated by: three-phase 5.5 kW motor (400 V),
- stroke counter,
- hose is pneumatically pushed against the blade,
- weight: 240 kg,
- optional accessories: measuring scale table 3 m, centring device,
hose meter counter, stroke counter, fume extractor.
OP-CTF5
TF 5
Cutting machine developed to cut hydraulic hoses with 1, 2, 4 and

6 braids of up to 3 and flexible industrial hoses of up to 4. Used
for series production.
- operated by: three-phase 7.5 kW (400 V),
- stroke counter,
- adjustable cutting speed,
- weight: 480 kg,
- optional accessories: measuring scale table 3 m, hose centring
device, hose meter counter, fume extractor.
OP-CTF5/ECO
TF 5/ECO
Cutting machine developed to cut hydraulic hoses with 1, 2, 4 and

6 braids of up to 3 and flexible industrial hoses of up to 4. Used
for series production.
- operated by: three-phase 7.5 kW (400 V),
- weight: 340 kg,
- optional accessories: measuring scale table 3 m, hose centring
device, hose meter counter, stroke counter, fume extractor.
1073

MINI CUT 5-50
HY-9006-01-00
A cutting machine developed to cut hydraulic hoses with 1 or 2 braids

of up to 2 in diameter and with 4 braids of up to 1.1/4 in diameter.
Designed for workshops and service vans.
- operated by: three-phase 3 kW motor,
12/24 V 1.1 kW motor (battery powered),
- speed of revolutions: 2880 r.p.m.,
- standard cutting blade: 300x3x50 mm - smooth (a toothed blade
can also be used),
- weight: 45 kg,
- can be connected to external fume removal system ( 63 mm).
MAXI CUT 5-60 OT
HY-9009-00-00
A cutting machine developed to cut hydraulic hoses with 1, 2 or 4

braids of up to 2 in diameter.
Designed for series production of hydraulic hose assemblies.
- operated by: three-phase 5.5 kW motor,
- pneumatically operated min. 6 bar,
- standard cutting blade: 400x4x50 mm - smooth (a toothed blade
can also be used),
- three-grade cutting speed,
- weight: 140 kg,
POWER CUT 5-75 OT
HY-9010-00-00
1074
A cutting machine developed to cut hydraulic hoses with 1 or 2 braids

of up to 3 in diameter and with 6 braids of up to 2 in diameter.
Designed for series production of hydraulic hose assemblies.
- operated by: three-phase 7.5 kW motor,
- pneumatically operated min. 6 bar,
- standard cutting blade: 520x4x38 mm - smooth, (a toothed blade
can be also used),
- weight: 210 kg,

FINN-POWER CM30 (CM30/12V)
FP-CM30
A cutting machine developed to cut hydraulic hoses with 1, 2 braids

of up to 2 in diameter (CM30/12V - 1.1/4) and with 4 braids of up
to 1.1/4 in diameter (CM30/12V - 3/4).
Widely used in repair shops, service vans and car service stations.
12V 1.1 kW motor (battery powered)
- standard cutting blade: 300 mm,
- weight: 50 kg.
FINN-POWER CM35
A cutting machine developed to cut hydraulic hoses with 1 and 2

braids of up to 2 in diameter and with 4 braids of up to 1.1/4 in
diameter.
Used in repair shops and for small series production.
- speed of rotation: 2750 r.p.m.,
- standard cutting blade: 300 mm,
- weight: 60 kg.
FP-CM35
FINN-POWER CM91
A cutting machine developed to cut hydraulic hoses with 1, 2, 4 and

6 braids of up to 3 in diameter.
- standard cutting blade: 650mm,
- electric control,
- stroke counter,
- optional accessories: a measuring scale table to measure hose
length, fume extractor, engine brake.
FP-CM91
1075

FINN-POWER CM75 PH
CM 75 PH machine is designed to cut hydraulic hoses with 1, 2 or

4 braids of up to 2 in diameter.
Used for series production of hydraulic hose assemblies.
- operated by three-phase 7.5 kW motor,
- standard cutting blade: 520x4x38 mm - toothed blade
(smooth blade can be used as well),
- weight: 270 kg.
A measuring scale table to measure hose length (2 meter long or
with extension module - 4 m) and a fume extractor can be installed
as additional equipment.
code
FP-CM75PH
FP-CM75PH/S
FP-CM75PH/W
description
table to measure hose length
fume extractor
Cutting blades
Blades made of hardened steel. Two types of cutting blades available:

- standard (smooth),
- toothed.
The toothed blades enable to cut at higher cutting speed, extremely
suitable for 4 and 6 braid hoses.
code
HY-9002-00-02
HY-9001-00-01
HY-9001-00-02
HY-9006-06-01
HY-9006-00-01
HY-9003-00-01
HY-9003-00-04
HY-9009-01-04
FP-055201
description
standard blade 200x3x40 mm
standard blade 250x3x25,4 mm
code
description
HY-9006-01-02
HY-9003-01-02
HY-9009-01-02
HY-9005-00-04
FP-12251
toothed blade TS 250x3x40 mm

toothed blade TF 520x4x38 mm
code
description
HY-9006-01-05
HY-9006-01-06
HY-9005-01-07
HY-9005-01-04
HY-9005-01-05
1076
adaptor - ring 40x25,4 mm

adaptor - ring 40x32 mm

Skiving machines for hydraulic hoses
SKALMAN
Very simple manually operated device designed to skive down

external or internal rubber layer of skived hydraulic hoses in a
diameter range from 3/16 to 2.
It is irreplaceable in any workshops manufacturing hydraulic hose
assemblies.
For application with EST, IST type tools. Mounted in a vice. Weight 4 kg.
HY-9020-00-05
MIDI SKIVE 5-50B
A machine designed to skive down external or internal rubber layer

of skived hydraulic hoses with 1, 2 or 4 braids in a diameter range
from 3/16 to 2.
Used for series production of hydraulic hose assemblies. For
application with EST, IST type tools.
Driven by three-phase 0.37 kW motor. Weight 35 kg.
HY-9020-04-01
POWER SKIVE 5-50

TWIN SKIVE 5-50
TWIN PUSH 5-50
A machine designed for semi-automatic skiving of external or internal

rubber layer of skived hydraulic hoses with 1, 2, 4 and 6 braids in a
diameter range from 3/16 to 2 and for inserting fittings. Used for
full-scale production of hydraulic hose assemblies. Efficiency
400 600 pcs/hour.
Pneumatically operated, air pressure min. 6 bar.
POWER SKIVE 5-50 (HY-9082-03-00)
- driven by: three-phase 0.75 kW motor,
- for application with EST, IST type tools and tools for fittings inserting
HY-9082-03-00
HY-9082-02-00
HY-9083-03-00
TWIN SKIVE 5-50 (HY-9082-02-00)

- driven by: three-phase 2x0.75 kW motor,
- for application with EST, IST, OST type tools and tools for fittings
inserting,
- simultaneous internal and external skiving
(reduced operation time).
TWIN PUSH 5-50 (HY-9083-03-00)
- a machine designed only for assembling straight and elbow fittings.
1077

Skiving machines for hydraulic hoses
EST
Tool used for external skiving of rubber layer of hydraulic skived

hoses. A complete tool consists of a holder (A) with a knife arm (C),
a skiving knife (D) and a mandrel (B). Skiving length is adjustable
and set by moving the mandrel forwards or backwards for the length
required. Skiving depth is set by pulling the knife to the mandrel
to the distance required. The mandrel is made of hardened steel,
the holder and the knife arm of zinc plated steel. The skiving knife
has four sharp edges. A long knife arm is used when skiving hoses
requiring bigger skiving length. For POWER SKIVE machine an EST
with two arms and two knives is necessary.
EST-S tools (short knife arm)

code
HY-9022-00-00
HY-9022-00-01
HY-9022-00-03
HY-9022-02-03
HY-9022-00-04
HY-9022-00-05
HY-9022-00-06
HY-9022-00-08
HY-9022-00-10
HY-9022-00-12
HY-9022-00-16
HY-9022-01-20
HY-9022-01-24
name
EST-L tools (long knife arm)
skiving length
holder+knife arm (100 mm)

knife arm (100 mm)
skiving knife
mandrel 3/16
23 37 mm
mandrel 1/4
23 37 mm
mandrel 5/16
23 40 mm
mandrel 3/8
23 46 mm
mandrel 1/2
23 46 mm
mandrel 5/8
23 65 mm
mandrel 3/4
23 65 mm
mandrel 1
23 65 mm
mandrel 1.1/4
23 60 mm
mandrel 1.1/2
23 60 mm
code
HY-9022-01-00
HY-9022-00-02
HY-9022-00-03
HY-9022-00-16
HY-9022-01-20
HY-9022-01-24
HY-9022-01-32
name
skiving length
holder+knife arm (125 mm)

knife arm (125 mm)
skiving knife
mandrel 1
40 75 mm
mandrel 1.1/4
45 85 mm
mandrel 1.1/2
45 85 mm
mandrel 2
45 85 mm
IST
Tool used for internal skiving of rubber layer of multi-braid hoses

with 3 to 6 reinforcement layers. Internal skiving is necessary when
assembling INTERLOCK fittings. A complete IST tool consists of
a special skiving knife and a slidable mandrel. Skiving length is
adjustable between 5 and 35 mm and set by moving the mandrel
forwards or backwards for the length required. Skiving depth is
adjustable between 1 and 6 mm by setting the height of the skiving
knife. IST is made of hardened steel. The skiving knife is adjusted
to one or two sizes of skiving tools and is not included in the tool
(ordered separately).
code
HY-9025-15-06
HY-9025-15-08
HY-9025-15-10
HY-9025-15-12
HY-9025-15-16
HY-9025-15-20
HY-9025-15-24
HY-9025-15-32
1078
description
skiving tool IST 3/8
skiving tool IST 1
skiving tool IST 1.1/4
skiving tool IST 1.1/2
skiving tool IST 2
code
HY-9025-01-05
HY-9025-01-06
HY-9025-01-08
HY-9025-01-10
HY-9025-02-10
description
skiving knife 5 mm
skiving knife 6 mm
skiving knife 8 mm
skiving knife 10 mm
skiving knife 10 mm (long)
IST
3/8
1/2
5/8, 3/4
1, 1.1/4
1.1/2, 2

Hose assemblies marking equipment
HY-9031-10-02
MARKMAN ll
A machine designed to mark ferrules of hydraulic hoses. The ferrules
are marked before crimping. They are reeled along an inscription
arranged from types in a type holder. Marking in two or three lines
holding up to 10 types 3 or 4 mm high. Ferrule outside diameter
ranges from 13 mm to 85 mm (3/16 to 2). The machine can be
driven manually with a lever (II-M version, code HY-9031-10-01) or
with pneumatic actuator (II P version - in the picture) fed with air
under pressure of 6 bar.
Weight 28 kg (II-M), 35 kg (II-P).
code
HY-9031-10-05
HY-9031-10-04
HY-9031-00-04
description
QC Adaptor
3 line 4 mm type holder
4 mm type set
FINN-POWER marking dies
The application of special marking dies for FINN-POWER crimping

machines offers possibility of imprinting characters on a ferrule
during crimping operation. There is a groove in the marking die which
enables arranging an inscription consisting of 12 up to
16 characters that are 2 or 3 mm high depending on the size of the
die. It is possible to mark in two lines when two marking dies in the
set are used.
A set of marking dies, single marking dies, types and accessories
are available for all standard dies with nominal crimping diameter
ranging from 14 78 mm.
MB20, MB21
A machine designed for dynamic impressing of an inscription on

ferrules of a hose assembly. Three exchangeable types of springs
allow to adjust the force of impression. Inscriptions can contain up
to 15 types 2 mm high, in one or two lines.
Drive: manual (MB20), pneumatic 7 bar (MB21),
Weight: 40 kg (MB20), 64 kg (MB21),
Accessories: see table below (ordered separately).
A vee block shown in the picture is not included in the set.
OP-MB20
OP-MB21
code
OP-MB-PC34
OP-MB-PC34001
OP-MB-CASE
description
1 line type holder
2 line type holder
2 mm type set
In order to make optimal selection of machines and marking units, please contact Technical Department of TUBES
INTERNATIONAL.
1079

Hose assemblies marking equipment
MARKER HP1, HP1 P
OP-MHP1
A machine for dynamic impressing of an inscription on ferrules of

a hose assembly up to 2 in diameter. Equipped with one line type
holder that can include up to 16 characters 3 mm high.
Driven by: hand operation (HP1),

pneumatically operated max. 6 bar (HP1 P).
Weight: 26 kg (HP1),

50 kg (HP1 P).
Accessories (to be ordered separately):
code
OP-MHP-PC2
OP-MHP-CASE
OP-MHP-NUM
OP-MHP-PP
description
2 line type holder
set of characters
type holder with 3 rolls
pneumatic pedal
OP-MHP-PC2
OP-MHP-NUM
OP-MHP-PP
OP-MHP1-P
Machines for inserting fittings

INSERT - 02P
A machine designed to insert fittings on hydraulic hoses up to 2 in
diameter. The use of INSERT-02P in production process reduces
the time needed for assembly.
- drive and operation: pneumatic 7 bar,
- hose mounting:
pneumatic,
- weight:
85 kg.
Tools for fitting inserting are ordered separately.
code
OP-INSERT-02P
1080
OP-INS-02PSET
description
set of tools for fitting inserting for 2

Test benches for hydraulic assemblies testing
P 110, P 160, P 160E
UF-P160/P
UF-P160E/P
UF-P160B/P
The test bench designed to test hydraulic hose assemblies with static pressure. The machine used in workshops
allows to carry out a final inspection of the quality of manufactured assemblies.
Characteristics:
- lockable testing tank with safety system consuming pressure when the tank is being opened,
- closed system tank of testing fluid with 100 l (P160), and 25 l (P160E),
- testing fluid: anticorrosive, safe and environment-friendly water-oil emulsion,
- testing capability: flexible assemblies (also in coils), rigid assemblies and other hydraulic components (valves,
cylinders, etc.),
- assemblies that are to be tested are attached to the test benches using STECKO Adaptors,
- electronic control of P160B version enables printing out test reports, storing and data processing.
machine code
parameters
UF-P160/P
(UF-P160B/P)
test pressure [bar]

drive
UF-P160E/P
additional accessories and options
code
120 1300
STECKO Adaptor set - metric (DN4 DN12)
UF-405901
pneumatic-hydraulic intensifier
STECKO Adaptor set - imperial (1/4 3/4)
UF-405902
anticorrosive additive 10 l
UF-EM10L
filter (without filter cartridge)
UF-600901
flow [l/min]
1.1
air operation
7 bar, 20 Nl/min
testing tank dimensions [mm]
1590x795x370
1200x600x500
filter cartridge 5 m
UF-6004
bench dimensions [mm]
2210x950x1325
1400x600x1200
filter cartridge 12 m
UF-6005
assembly cleaning unit (P 160)
UF-405903
fast filling pump (P 160)
UF-405904
low pressure testing 20 120 bar (P 160)
UF-ND160
weight (empty) [kg]

standard accessories
210
service manual, suction filter 100 m,
air preparation unit
Machines UF-P160/P (UF-P160B/P), UF-P160E/P delivered with a set of adaptors STECKO (UF-405901, UF405902) and anti-corrosion fluid (UF-EM10L) as a standard.
1081

P 200B, P 200BH
UF-P200B/P
(UF-P200BH/P)
The test bench designed for testing hydraulic hose assemblies with static pressure. The machine used in series
production plants allows to carry out final inspection of the quality of manufactured assemblies.
Characteristics:
- lockable testing tank with safety system consuming pressure when the tank is being opened,
- closed system of testing fluid with 100 l reservoir capacity,
- testing fluid: anticorrosive, special water-oil emulsion, operation and environment friendly,
- testing capability: flexible assemblies (also in coils), rigid assemblies and other hydraulic components (valves,
cylinders, etc.),
- assemblies to be tested are placed in the test chamber, clamped with the patented clamping system and sealed
by a hydraulic clamp,
- testing procedure: automatic, with fast filling, venting and automatic empting of the tested assembly,
- high testing performance: up to 1000 assemblies (DN12, L=800 mm) during 8 hour shift,
- electronic control enables printing out test reports, storing and data processing.
hydraulic clamp
sealing area
fast assembly handle
1082
The principle of fast assembly mounting

system
A hydraulic hose assembly is placed between
two testing heads and clamped with fast
mounting handles. The edge of a ferrule leans
against a holding plate. The hydraulic system
presses sealing cones against the internal edge
of a fitting, ensuring perfect sealing of the tested
assembly quickly and with no need to apply any
screwed adaptors.

P 200B, P 200BH
parameters
test pressure [bar]
drive
flow [l/min]
fast filling pump [l/min]
machine code
UF-P200B/P, UF-P200BH/P
120 1300
4,5
7 bar, 20 Nl/min
electric power supply
400 V, 0,38 kW
testing tank dimensions [mm]
1590x795x370
bench dimensions [mm]
2210x950x1325
standard accessories
holding plate with clamping diameter XX

from 8 to 42 mm (12 pcs.)
1,1
air operation
weight (empty) [kg]
UF-HS400-.....
120 3000
pneumatic-hydraulic
intensifier
code
additional options and accessories
210
service manual, suction filter
100 m, air preparation unit
UF-DSP400-.....
sealing cones (6 pcs.)
blind sealing cones (3 pcs)
UF-BDSP400-.....
sealing plate (120)
UF-DS400-1
low pressure testing 20 120 bar
UF-ND200
anti-corrosion liquid 10 l
UF-EM10L
Machines UF-P200B/P, UF-P200BH/P delivered with a set of holding plates (UF-HS400-...), sealing cones (UFDSP400-..., UF-BDSP400-...), sealing plate (UF-DS400-1), and anti-corrosion fluid (UF-EM10L).
Examples of practical application of fast assembly system in P200B (P200BH) machine
1083

BC1200 E, BC1200 EES
BC1200 E
BC1200 EES
Test benches are designed to check hose assemblies, small actuators and other units of pressure hydraulics with
static and pulsating pressure.
BC1200E test bench - both ends of a tested hose assembly are attached to the porting blocks on the left wall
of a test tank. Filling and testing processes are manual - by shifting the valves and pressure regulator. Pressure
impulses are generated manually - by shifting the valve.
BC1200 EES test bench - equipped with two

porting blocks, one is fixed and the other sliding
so it can adjust to the length of a tested hose
assembly. Filling and testing processes are
automatic - according to a test program that is
set on the touch pad (testing time and pressure;
when tested with pulsating pressure: maximum
pressure and time, pause time, number of
cycles to go). Test reports can be printed out
on a printer that can optionally be ordered with
BC1200 EES test bench.
parameters
test pressure [bar]
drive
operated by
test fluid
oil tank capacity [l]
pre-filling flow rate [l/min]
control
testing procedure
number, dimension of connections
internal lightning
test chamber dimensions [mm]
machine dimensions [mm]
weight (without oil) [kg]
1084
OP-BC1200 E
machine code
OP-BC1200 EES
100 1200
electric hydraulic pump, hydraulic intensifier 1:10
400 V, 50 Hz, 3-phase
hydraulic oil
110
17
manual
electronic
manual
automatic
3 x 1/4 BSP
9 x 1/4 BSP
yes
2000 x 830 x 500
2000 x 830 x 300
2500 x 875 x 1200
2500 x 955 x 1200
619
533

Racks for hydraulic hoses
OP-SR-HC
OP-SRB-6
parameters
total loading capacity [kg]
one arm loading capacity [kg]
dimensions [mm]
OP-SR8
OP-SR-HC
OP-SRB6
OP-SR6
OP-SR8
250
1200
660
1900
200
110
240
2020x1280x918
weight [kg]
OP-SR6
1600x1600x2200 1341x1524x1978 2372x2372x2173
110
84
156
AV 01
Hose holder with a manually operated reel for rolling and unrolling
of hoses with inside diameter of up to 1.
- max. loading: 240 kg,
- hose holder diameter: 1050 mm,
- dimensions: 1150 x 1050 x 1350 mm,
- weight: 45 kg,
- optional accessories: hose and reel guiding device.
OP-SRAV-01
AV 01 EL
OP-SRAV-01EL
Hose holder with an electrically operated reel for rolling and unrolling of hoses with inside diameter of up to 1. Controlled with
a foot pedal, emergency switch on a post next to the pedal. This
hose holder features a reversing switch (forwards/backwards) and
a speed controller 25/50 r.p.m.
- max. loading: 240 kg,
- hose holder diameter: 800 mm,
- dimensions: 950 x 800 x 1350 mm,
- weight: 88 kg,
- operated by: 400 V, 50 Hz, 3-phase,
- optional accessories: hose and reel guiding device.
1085

Oil filtering machines
CF 1
A filtering trolley used for filling machines and hydraulic systems with
oil, as well as for sucking and filtering of oil from tanks of presses,
machines and hydraulic systems.
-
electric drive 400 V, 0.55 kW,

pomp 39 l/min,
filter 30 m (25 and 10 m also available),
suction filter 90 m,
weight 58 kg.
OP-CF1
Deburring machines (pipe finishing)

OP-RS02
S 01, S 02
Machines designed to finish pipe ends after cutting (external

and internal burr removal).
parameters
maximum pipe diameter [mm]
OP-RS01
S 01
S 02
42
75
voltage [V]
230
400
power [kW]
0,18
0,37
weight [kg]
28
65
Bending machines for hydraulic pipes

M 18
User friendly, manually operated tool developed to bend hydraulic

pipes with outside diameter ranging from 6 to 18 mm. Designed for
small workshops. Bending rollers included in a set. Mounted in a
vice. Weight 6 kg.
picture
bending
roller
6-8
10-12
OP-RM18
1086
14
15
16
18
min. bending
radius R
[mm]
32,75
33,75
35
36
36
43,5
43,5
51
pipe O.D.
[mm]
6x1
8x1
10x1
12x1,5
14x1,5
15x1,5
16x1,5
18x2

Bending machines for hydraulic pipes
OP-RCM42
OP-RCMS42
OP-RC42
OP-RCUC42MSET
Bending machines for hydraulic pipes with diameter range 6 42 mm (pipe wall thickness up to 4 mm). Adjusted
to bending tools (ordered separately).
CM 42 (CMS 42)
Manual bending machine with two-stage hydraulic pomp. The CMS 42 version is equipped with a steel base and
a box for tools. Weight 40 kg (CMS 42 - 48 kg).
C 42
A bending machine equipped with electric drive for hydraulic system (400 V, 1.1 kW). A limit switch facilitates series
production. Weight 100 kg.
Bending tools
A set of bending tools CUC42MSET for machines: C 42, CMS 42, CM 42, MINI CENTER, CENTER JUNIOR. The
set consists of bending rollers for metric hydraulic pipes of outside diameter 6, 8, 10, 12, 14, 15, 16, 18, 20,
22, 25, 28, 30, 32, 35, 38 and 42 mm. Single parts of the set and tools for pipes in inch-sizes are also available
(check the table below).
picture
min. bending
radius R
bending angle
[mm]
set of bending tools for metric hydraulic pipes RCUC42MSET
OP-RCUC42M06
6
15
170
OP-RCUC42M08
8
16,5
170
OP-RCUC42M10
10
27,5
170
OP-RCUC42M12
12
32,7
170
OP-RCUC42M14
14
46
170
OP-RCUC42M15
15
46
170
OP-RCUC42M16
16
48
170
OP-RCUC42M18
18
48
170
OP-RCUC42M20
20
66
160
OP-RCUC42M22
22
66
160
OP-RCUC42M25
25
81,5
160
OP-RCUC42M28
28
81
160
OP-RCUC42M30
30
98,5
150
OP-RCUC42M32
32
101
150
OP-RCUC42M35
35
125,5
120
OP-RCUC42M38
38
116
120
OP-RCUC42M42
42
126
120
set of bending tools for imperial hydraulic pipes
OP-RCUC42P01
1/8
27,5
170
OP-RCUC42P02
1/4
46
170
OP-RCUC42P06
3/8
48
170
OP-RCUC42P08
1/2
66
160
OP-RCUC42P12
3/4
81
160
OP-RCUC42P16
1
125
120
OP-RCUC42P20
1 1/4
126
120
roller code
pipe O.D
[mm]
A
[mm]
B
[mm]
60
60
70
80
110
110
110
110
140
140
170
180
220
220
250
250
250
70
70
115
120
180
180
180
190
230
240
270
300
300
300
440
440
440
70
110
110
140
180
250
250
115
180
180
240
300
440
440
1087

Hydraulic pipe bending machines
C50ES
Semi-automatic device designed to bend hydraulic pipes with
electrically powered hydraulic pump. Design and principle of
operation are based on bending a pipe around bending rollers.
Electronic control panel allows high precision bending. Upon pressing
START button on control panel, the machine starts bending a pipe
by pre-determined angle with no interference from operator. Version
with double foot-operated pedal with safety switch available as an
option. Bending rollers around which pipes are bent to be ordered
separately (18 sizes).
OP- RC50ES
- bending: 6 50 mm (wall thickness 3 mm),

- powered by: 400 V, 50 Hz, 1.1 kW,
- max. bending angle: 180,
- 90 bending time: 6 s,
- bending angle tolerance: 1,
- control: electronic,
- weight: 173 kg,
- optionally powered by: 220 V.
Bending rollers
Set of bending rollers - OP-RCUC50DSET designed for OP-RC50ES machine. Consists of 18 sets of bending rollers.
Rollers are available separately as well.
picture
code
OP-RCUC50DSET
OP-RCUC50D06
OP-RCUC50D08
OP-RCUC50D10
OP-RCUC50D12
OP-RCUC50D14
OP-RCUC50D15
OP-RCUC50D16
OP-RCUC50D18
OP-RCUC50D20
OP-RCUC50D22
OP-RCUC50D25
OP-RCUC50D28
OP-RCUC50D30
OP-RCUC50D32
OP-RCUC50D35
OP-RCUC50D38
OP-RCUC50D42
OP-RCUC50D50
1088
pipe O.D.
[mm]
min. bending radius R

[mm]
set of bending rollers (18 pcs)

bending rollers (sold separately)
6
20
8
22
10
25
12
25
14
35
15
35
16
40
18
40
20
50
22
50
25
65
28
75
30
90
32
90
35
95
38
95
42
115
50
135

Multifunctional machines for hydraulic pipe processing
MINI CENTER
A multifunctional machine designed to process hydraulic pipes

6 42 mm (wall thickness to 4 mm).
Functions:
- bending,
- deburring,
- pre-assembly of cutting rings DIN 2353,
- pipe flaring JIC 37.
Electric drive 230 V, 1.7 kW.
Weight 183 kg.
Adjusted to tools for bending, DIN 2353 rings assembly and
flaring (ordered separately).
OP-RMC
CENTER JUNIOR
A multifunctional machine designed to process hydraulic pipes

6 42 mm (wall thickness to 4 mm). Functions:
- cutting (to 100 mm),
- bending,
- deburring,
- pre-assembly of cutting rings DIN 2353,
- pipe flaring JIC 37.
Equipped with a small compressor for pipe cleaning.
Electric drive 230 V, 4.6 kW.
Air-operated 220 l/min.
Weight 262 kg.
OP-RCJ
Adjusted to tools for bending, DIN 2353 rings assembly and

flaring (ordered separately).
Tools for DIN 2353 rings assembly and for pipe flaring (JIC 37)
Tools for MINI CENTER, CENTER JUNIOR,
US 01, US 02, US-FL/01, US-FL/01MAN machines.
code
OP-RUNIBSET
OP-RUNIP1SET
OP-RUNIP2SET
OP-RPA02
OP-RUNISFLSET
OP-RUSFLBL
OP-RPA01
description
set of metric pre-assembling sockets
6 42 mm DIN 2353 (20 pcs.)
set of metric pre-assembling plates
6 42 mm DIN 2353 (16 pcs.)
set of metric pre-assembling plates
DIN 2353 (20 pcs.) for US 02
box for DIN 2353 rings mounting tools
set of metric tools for flaring
6 42 mm (17 pcs.)
flaring block 37
box for flaring tools
1089

Assembly machines for DIN 2353 rings
US 015MAN
Hand operated tool for pre-assembling of DIN 2353 cutting rings on
hydraulic pipes in outside diameter range 6 15 mm. Assembled in
a vice. Weight 12 kg.
Adjusted to assembly cones and back-up plates for assembly
of cutting rings (ordered separately).
OP-RUS015MAN
code
description
OP-RUNIB015SET
Set of metric assembly cones 6 15 mm (10 pcs.)
OP-RUNIP015SET
Set of metric back-up plates 6 15 mm (6 pcs.)
US 01
OP-RUS01
Machines for pre-assembling of DIN 2353 cutting rings on hydraulic

pipes. Pneumatic drive maximum 6 bar, manual system for setting
assembly pressure.
Very easy to operate - starts with one press of the button and no
further interference is needed for quick and precise performance.
Weight 42 kg.
Adjusted to assembly tools for cutting rings (ordered separately).
US 02

pipes. The electric drive of hydraulic system (400 V, 0.75 kW),
automatic system for setting assembly pressure.
Weight 54 kg.
OP-RUS02
Adjusted to assembly tools for cutting rings (ordered separately).
Machines for DIN 2353 rings assembly and pipe flaring (JIC 37)
OP-RUS-FL/01
US-FL/01, US-FL/01MAN
pipes and for flaring of the pipe ends (JIC 37 connecting system).
The US-FL/01 version has the electric drive of hydraulic system
(400 V, 0.75 W), manual system for setting operation pressure.
US-FL/01MAN version - manual drive of hydraulic pump.
Weight US-FL/01 - 58 kg.
Weight US-FL/01MAN - 38 kg
Adjusted to flaring tools and assembly tools for cuttings rings
(ordered separately).
OP-RUS-FL/01MAN
1090

Pipe flaring machine (ORFS 90 / JIC 37)
US-FL 9037 ECO
Machine designed for flaring of pipe ends - 90 (ORFS) and 37
(JIC). Process takes place automatically upon pressing START
button on control panel. The machine employs cold orbital flaring
which ensures smooth wall surface. Flaring by use of special tools
adjusted to diameter of pipes to be processed.
Tools (flaring mandrel, dies) to be ordered separately.
- pipe flaring (ORFS 90): 6 38x5 mm,
- pipe flaring (JIC 37): 6 42x4 mm,
- powered by: 400 V, 50 Hz, 2.3 kW,
- weight: 425 kg,
- optionally powered by 220 V.
OP-RUS-FL 9037ECO
Tools for pipe flaring (ORFS 90 / JIC 37)

Tools designed for pipe flaring on OP-RUS-FL9037ECO machine.
ORFS
JIC
1091

Cleaning devices for flexible hoses, assemblies and pipes
It is becoming more and more important to protect hydraulic systems against contamination. This increase in care
is due to the fact that the systems are more advanced and operate at higher speed and lower allowance. The
contamination of hydraulic oil reduces effectiveness of the machine, destabilizes its control, causes frequently
occurring defects and break-downs that put the machine out of operation.
DID YOU KNOW THAT
80% OF HYDRAULIC SYSTEM FAULTS

ARE CAUSED BY
CONTAMINATION ?
The requirements concerning the purity of hydraulic oil are specified by ISO 4406 and American NAS 1638 standard.
The standards define cleanliness classes of oil according to the amount of contamination of certain volume - the
lower the number defining the class, the cleaner the hydraulic oil.
NAS 1638
00
10
11
12
ISO 4406
8/4
9/6
10/7
11/8
12/9
13/10
14/11
15/12
16/13
17/14
18/15
19/16
20/17
21/18
Hydraulic hoses, assemblies and pipes cleaning methods:

- blowing through with compressed air (does not meet any standards, however very useful),
- shooting cleaning projectiles using compressed air,
- slushing.
MICRO JET 5-50
A simple device designed to clean hoses and pipes with compressed

air. There are two plastic nozzles, one is for hoses from 3/16 to 1
and the other for hoses from 1 to 2. When the hose is pressed
against the nozzle the valve opens and makes cleaning possible.
- air pressure: min. 6 bar,
- connection to pneumatic installation: 1/2 BSP.
HY-9036-01-00
SPEEDY CLEAN
A machine for cleaning with special purpose detergent solution under

pressure. Designed to clean hoses and hose assemblies.
Ensures obtaining cleanliness class: ISO 4406: 16/13, NAS 1638: 8.
OP-SC
1092
hose diameter range from 1/4 up to 2,

electric drive 400 V,
air-operated 6 bar - 7 l/min,
container capacity 33 l,
operation pressure 60 bar,
weight 90 kg,
universal Adaptor for hoses from 1/4 to 2.

ULTRACLEAN devices for hose, assembly and pipe cleaning
The ULTRACLEAN device is designed to clean hoses, flexible assemblies and pipes for pressure hydraulics and
for other industrial application. Cleaning is carried out by shooting cleaning projectiles through the hose using
compressed air.
The application of the devices combined with the ULTRACLEAN

cleaning method allows to achieve ISO 13/10 cleanliness class of hydraulic oil.
EL, HL, HLMAX
UC-EL
A manual device for shooting cleaning projectiles.

Diameter range (for hoses):
- EL
- 1/8 1.1/4,
- HL
- 1/8 2,
- HLMAX
- 1/8 3.1/2,
Air-operated about 6 bar (1/2 hose).
Recommended filter 5 m.
HL, HLMAX are supplied with quick release coupling
with a revolving plug. EL is supplied with quick release
coupling.
BM-1
A tabletop device for shooting cleaning projectiles.

Diameter range (for hoses):
- BM-1
- 1/8 1.1/4,
Air-operated about 6 bar (1/2 hose).
Efficiency up to 500 assemblies / hour.
Complete with 5 m filter, foot control and 7 nozzles
selected according to customer specification.
The PVS module signalling that the cleaning projectile
has left the assembly is also available.
UC-HLMAX
UC-HL
UC-BM-1
1093

Sets with UC-EL device (economical version)
This device allows cleaning of hoses, pipes and assemblies in diameter range from 1/8 to 1.1/4. It is equipped
with revolving 45 shutting ring that facilitates quick nozzle changing and loading of cleaning projectiles. The inside
is made of hardened brass, plastic handle of high mechanical resistance and head and locking ring of anodic
treated aluminium.
EL7
Cleaning set consisting of:

- cleaning gun UC-EL,
- quick release coupling with a hose tail DN12 UC-QRC-C,
- 7 standard nozzles:

NH06, NH10, NH13, NH16, NH19, NH25, NH32,
- case UC-CC-LP.
EL7DP
Cleaning set consisting of:

- cleaning gun UC-EL,
- quick release coupling with a hose tail DN12 UC-QRC-C,
- 7 standard nozzles:

NH06, NH10, NH13, NH16, NH19, NH25, NH32,
- case UC-CC-LP,
- container for catching projectiles UC-PC,
- set of standard cleaning projectiles:

P007, P010, P012, P014, P016, P018 - 100 pcs. each

P020, P022, P026 - 50 pcs. each.

P033 - 40 pcs.

P040 - 30 pcs.
It is recommended to match nozzles and projectiles according to the following table:

diameter
nozzle
projectile
3/16
1/4
5/16
3/8
1/2
5/8
3/4
1
1.1/4
UC-NH06
UC-NH06
UC-NH08
UC-NH10
UC-NH13
UC-NH16
UC-NH19
UC-NH25
UC-NH32
UC-P007
UC-P010 or UC-P012
UC-P012 or UC-P014
UC-P014 or UC-P016
UC-P018 or UC-P020
UC-P022
UC-P026
UC-P033 or UC-P036
UC-P040 or UC-P045
The table above is of informative character.

If a hose was cut with an abrasive disk, a projectile with the diameter bigger than recommended should be used.
1094

The ULTRACLEAN devices are used to clean:
- hydraulic hoses and hose assemblies during production,
- used hydraulic hoses and hose assemblies,
- pipes while making pressure assemblies,
- pipes in metal constructions (also as protection against corrosion),
- heat exchanger components,
- steam boilers,
- air conditioning systems,
- gun barrels,
- chemical and food industry systems.
Nozzle types
A wide range of nozzle types, offered by Tubes International, allows ULTRA CLEAN system to be used in many
applications (cleaning hoses, pipes and other tubing types in practically all shapes and sizes).
For hoses (UC-NH...) - nozzles for hoses are placed inside hoses.
They can be used for pipes, heavy wall pipes and couplings. It is
the most popular type of nozzles.
JIC (UC-NJ...) - nozzles with connection ends adjusted to hoses
and pipes with JIC female thread connection.
For pipes (UC-NT...) - nozzles are pushed on pipes. The seal is
created between pipe end face and a lock inside the nozzle.
FFORX - nozzles designed for couplings with flat seal and sealing
ring.
Big general purpose nozzle - nozzles similar to nozzles for hoses.
Designed for diameters ranging from 55 mm (2.1/8) to 90 mm
(3.1/2).Diameter size rises by 10 mm.
Exemplary nozzles
UC-NH16
UC-NJ06
UC-NT10
UC-NJ19/T19
Use Ultra Clean system to reduce application shutdowns,

extend service life of filters and reduce the risk of premature
damage of an installation due to impurities !!!
1095

ULTRACLEAN devices to clean hoses, pipes and hose assemblies
Types of cleaning projectiles
Standard cleaning projectiles for the ULTRACLEAN devices are available in diameter range from 2 to 150 mm. The
projectiles are shot into hoses, pipes or assemblies under pressure and clean their internal surface. The pressure
is necessary as the diameter of projectiles is bigger by 20 30% than the diameter of hoses, pipes or assemblies.
Note: It is recommended to use the cleaning projectile to remove impurity reminders after the application of abrasive
or grinding projectiles. In order to match nozzles with adequate projectiles the tables in a user manual have to be
followed or experimentally determined.
Cleaning - for hoses and pipes; removes small particles of loose
impurities.
Abrasive - for hoses, pipes and assemblies wherever a layer of
scale, rust or other impurities sediment on the inside.
Grinding - pipes and assemblies with thicker layer of impurities,
scale and rust.
O.D.
[mm]
2
3
4
5
6
7
8
10
12
14
16
18
20
22
24
26
28
30
33
36
40
45
50
55
60
65
70
75
80
85
90
95
100
110
120
130
140
150
1096
code
cleaning
UC-P002
UC-P003
UC-P004
UC-P005
UC-P006
UC-P007
UC-P008
UC-P010
UC-P012
UC-P014
UC-P016
UC-P018
UC-P020
UC-P022
UC-P024
UC-P026
UC-P028
UC-P030
UC-P033
UC-P036
UC-P040
UC-P045
UC-P050
UC-P055
UC-P060
UC-P065
UC-P070
UC-P075
UC-P080
UC-P085
UC-P090
UC-P095
UC-P100
UC-P110
UC-P120
UC-P130
UC-P140
UC-P150
abrasive
UC-A006
UC-A007
UC-A010
UC-A012
UC-A014
UC-A016
UC-A018
UC-A020
UC-A022
UC-A024
UC-A026
UC-A028
UC-A030
UC-A033
UC-A036
UC-A040
UC-A045
UC-A050
UC-A055
UC-A060
UC-A065
UC-A070
UC-A075
UC-A080
UC-A085
UC-A090
UC-A095
UC-A100
UC-A110
-
grinding
UC-GR006
UC-GR007
UC-GR010
UC-GR012
UC-GR014
UC-GR016
UC-GR018
UC-GR020
UC-GR022
UC-GR024
UC-GR026
UC-GR028
UC-GR030
UC-GR033
UC-GR036
UC-GR040
UC-GR045
UC-GR050
UC-GR055
UC-GR060
UC-GR065
UC-GR070
UC-GR075
UC-GR080
UC-GR085
UC-GR090
UC-GR095
UC-GR100
UC-GR110
-
pack
[pcs.]
100
100
100
100
100
100
100
100
100
100
100
100
50
50
50
50
40
40
40
30
30
20
20
15
15
10
10
10
10
10
10
10
10
10
10
10
10
10

CLEAN SEAL system that prevents hose assemblies from dirt.
ULTRA CLEAN is the leader in contamination control solutions
of flexible hose assemblies and rigid pipes. To fully protect hose
assemblies after being cleaned, the producer introduced a new
solution - clean seal capsules. This process utilizes heat shrink
technology to encapsulate the end of a hose or tube assembly.
Such solution eliminates recontamination that occurs when
ill-fitting caps and plugs are forced onto assemblies, causing
plastic particles to shear off into the hose or tube.
Clean seal capsules leave absolutely no particles or sticky surface. They perfectly protect the hose assemblies or
pipes from contamination until they are removed. Removal includes griping the black pull tab, then ripping the pull
tab upwards and finally slipping the clean seal capsule off the hose assembly or pipe. Clean seal capsules are
single use and cannot be used again.
UC-CSS-230V
Clean seal system bench-top capsule applicator suitable

to apply clean seal capsules to a hose or tube assembly.
Equipped with a timer that ensures that air heater will
turn itself off automatically (time frame to be set with
accuracy to 1 minute)
Diameter range: from 20 mm to 80 mm of clean seal
capsule outside diameter that allows to protect fittings
from 1/4 to 2. Oversized shrink tunnel allows to apply
multiple hose and pipe assemblies at once.
Electric drive: 230 V / 50/60 Hz.
UC-HL1910E
Industrial device (heat gun) with adjustable temperature

control knob performed with the use of switch. Can be
used with heat diffuser. Electric drive: 230 V / 50 Hz.
UC-1.5HD, UC-2.0HD
Heat diffuser (fitting) to be assembled on heat gun.

Available in two sizes that depend on heat gun nozzle:
UC-1.5HD 1.1/2 (38 mm), UC-2.0HD 2 (50 mm). Made
of: AISI 304 stainless steel.
UC-HG-STAND
Flexible stand for heat gun UC-HL1910E equipped with a

so called sucker that enables installation on any smooth
surface. Flexible construction ensures work ergonomics
during assembly of clean seal capsules to hose or pipes
assemblies.
Heat shrink capsules
code
dimensions
fitting hex sizes
code
dimensions
fitting hex sizes
UC-CSC-2025P
UC-CSC-2540P
UC-CSC-2840P
UC-CSC-3140P
UC-CSC-3440P
20x25 mm
25x40 mm
28x40 mm
31x40 mm
34x40 mm
12 18 mm
18 22 mm
22 24 mm
24 27 mm
27 30 mm
UC-CSC-3850P
UC-CSC-4660P
UC-CSC-5260P
UC-CSC-6760P
UC-CSC-8060P
38x50 mm
46x60 mm
52x60 mm
67x60 mm
80x60 mm
30 32 mm
32 41 mm
36 47 mm
46 60 mm
60 72 mm
1097
MACHINES AND ACCESSORIES - hose reels

REELCRAFT spring retractable reels
GEN IV
Material:
Plastic
GEN IV series is an ideal solution in applications where size
of the reel is important e.g. service vans, assembling lines,
workbenches, etc. High grade plastic materials with added UV
stabilizers offer protection against UV light and eliminate the
possibility of hardening and cracking. Equipped with high quality
industrial hose, finished edge steel spring and heavy duty full
flow brass swivel. Available with swivel mounting brackets as
a standard.
code
hose length*
[m]
hose I.D.
[mm]
RC-GP612
RC-GP812
RC-GP1010
12 + 1,5
12 + 1,5
10 + 1,5
6
8
10
working
pressure
[bar]
16
16
16
weight
[kg]
7,5
7,5
7,5
connection
inlet / outlet
[BSP female / BSP male]
1/4
1/4
3/8
3/8
3/8
3/8
POLYCRAFT SG 3000
Material:
Polypropylene (black)
(ELHR and ELHB versions up to +80C)
General purpose hose reel to be mounted on the wall with a spring
driven mechanism. Available with hose and mounting brackets
as a standard. Widely used in service stations, agriculture,
gardening, industrial plants. Wire stand (RC-SG261398) to
place the hose reel on the floor, available on request.
code
usage
hose length
[m]
hose I.D.
[inch]
RC-SG3666ELAWR
RC-SG3860ELAWR
RC-SG3850ELHR
air / water
air / water
hot water
20
18
15
3/8
1/2
1/2
1098
working
pressure
[bar]
17
17
8
weight
[kg]
10,00
11,00
11,00
connection
inlet / outlet
[BSP fem. / BSPT male]
3/8
3/8
1/2
1/2
1/2
1/2

REELTEK
Material:
Powder coated steel, spool made of composite

materials with fibre glass reinforcement.
General purpose hose reel designed for industrial applications
such as air, water, oil and lubricant transfer. Equipped with
spring driven mechanism and available with or without the
hose. Guide arm allows adjusting the hose reel to seven different
positions.
code
option
RC-RT435OLP
RC-RT403OLP
RC-RT450OLP
RC-RT405OLP
RC-RT650OLP
RC-RT605OLP
RC-RT835OLP
RC-RT803OLP
with hose
without hose
with hose
without hose
with hose
without hose
with hose
without hose
RC-RT635OMP
RC-RT603OMP
RC-RT835OMP
RC-RT803OMP
with hose
without hose
with hose
without hose
RC-RT435OHP
RC-RT403OHP
RC-RT635OHP
RC-RT603OHP
with hose
without hose
with hose
without hose
working
pressure
[bar]
low pressure hose reels
11
1/4
21
11
1/4
21
15
1/4
21
15
1/4
21
15
3/8
21
15
3/8
21
11
1/2
21
11
1/2
21
medium pressure hose reels
11
1/4
69
11
1/4
69
11
3/8
69
11
3/8
69
high pressure hose reels
11
1/4
345
11
1/4
345
11
3/8
276
11
3/8
276
hose length
[m]
hose I.D.
[inch]
weight
[kg]
connection
inlet / outlet
[NPT female / NPT male]
11,00
9,00
12,00
10,00
14,00
11,00
14,00
11,00
3/8
3/8
3/8
3/8
3/8
3/8
1/2
1/2
1/4
1/4
3/8
1/2
-
14,00
10,00
16,00
11,00
3/8
3/8
1/2
1/2
3/8
1/2
-
15,00
10,00
16,00
11,00
3/8
3/8
1/2
1/2
1/4
3/8
-
DP 7000
Material:
Powder coated steel
Working temp.: Up to +65C (OLP version - with hose)
Up to +99C (OMP version - without hose)
Extremely robust hose reel with interlocking dual pedestal base
design ensures stability and resistance to vibrations. Meets MILSTD-810F requirements (used in military trucks). Not equipped
with hose which is available on request.
code
option
RC-DP7600OLP
RC-DP7800OLP
without hose
without hose
RC-DP7600OMP
RC-DP7800OMP
without hose
without hose
working
pressure
[bar]
low pressure hose reels
15
3/8
35
15
1/2
35
medium pressure hose reels
15
3/8
207
15
1/2
207
hose length
[m]
hose I.D.
[inch]
weight
[kg]
connection
inlet / outlet
[NPT female / NPT male]
19,00
20,00
1/2
1/2
1/4
3/8
21,00
19,00
1/2
1/2
3/8
1/2
1099

FUEL 7000 / 80000 series
Material:
Powder coated steel
Spring-driven hose reels with Viton seals designed especially

for fuel transfer. Their construction ensures the greatest possible
strength and is ideal for mobile and permanently mounted
applications. Heavy-duty and corrosion resistant concept make
fuel reels perfectly suitable for petrochemical applications and
other branches of industry. If ordered with hose, hose equipped
with fitting of 3/4 male BSPT used as a standard.
code
option
hose length
[m]
hose I.D.
[inch]
RC-F7925OLP
RC-F7900OLP
RC-F83050OLP
RC-F83000OLP
RC-FD83075OLP
RC-FD83000OLP
RC-FD84050OLP
RC-FD84000OLP
with hose
without hose
with hose
without hose
with hose
without hose
with hose
without hose
8
8
15
15
22
22
15
15
3/4
3/4
3/4
3/4
3/4
3/4
1
1
working
pressure
[bar]
3,5
35
3,5
35
3,5
35
3,5
35
weight
[kg]
25
21
41
38
59
41
55
41
connection
inlet / outlet
[BSPT male]
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
3/4
1
1
1
1
9000 series
Material:
Powder coated steel
D9000 series ensures the biggest amount of stability for the
delivery of compressed air and water. Models designed for
petrochemical applications are also available (please contact
Sales Department of TUBES INTERNATIONAL). Ideal solution
for service vans, service or plant work areas. Heavy-duty and
corrosion resistant design make D9000 series reels widely used
in many branches of industry.
code
option
hose length
[m]
hose I.D.
[inch]
RC-D9200OLP
RC-D9299OLP
RC-D9300OLP
RC-D9350OLP
RC-D9305OLP
RC-D9375OLP
RC-D9399OLP
RC-D9400OLP
RC-D9450OLP
RC-D9200OMP
RC-D9275OMP
RC-D9300OMP
RC-D9350OMP
without hose
with hose
without hose
with hose
without hose
with hose
with hose
without hose
with hose
without hose
with hose
without hose
with hose
30
30
23
15
30
23
30
15
15
23
23
15
15
1/2
1/2
3/4
3/4
3/4
3/4
3/4
1
1
1/2
1/2
3/4
3/4
1100
working
pressure
[bar]
35
21
35
17
35
17
17
35
17
207
137
207
86
weight
[kg]
53
61
53
59
59
69
79
53
63
54
60
54
65
connection
inlet / outlet
[female]
1/2 NPT 1/2 NPT
1/2 NPT 1/2 NPT
3/4 BSP 3/4 BSP
3/4 BSP 3/4 BSP
3/4 BSP 3/4 BSP
3/4 BSP 3/4 BSP
3/4 BSP 3/4 BSP
1 BSP
1 BSP
1 BSP
1 BSP
1/2 NPT 1/2 NPT
1/2 NPT 1/2 NPT
3/4 BSP 3/4 BSP
3/4 BSP 3/4 BSP

REELCRAFT hose reels
30000 series - motor driven
Material:
Powder coated steel
30000 series hose reel are designed for rugged, heavy duty
applications requiring long lengths of hose and large storage
capacity. All bolted construction (no welded elements), full flow
swivel, heavy steel frame and drum ensure longest service
life. Available in hand crank, pneumatic, hydraulic or electric
drive version. Hoses for 30000 series reels should be ordered
separately.
code
hose length
[m]
hose I.D.
[inch]
working pressure
[bar]
RC-...32106M...
RC-...32112M...
RC-...32118M...
RC-...32122M...
RC-...32128M...
RC-...33106M...
RC-...33112M...
RC-...33118M...
RC-...33122M...
RC-...33128M...
RC-...37118L...
30
60
100
122
153
16
30
54
69
84
30
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
1
207
207
207
207
207
207
207
207
207
207
21
connection
inlet / outlet
[NPT female]
1/2
1/2
1/2
1/2
1/2
3/4
3/4
3/4
3/4
3/4
1
Construction of the code 30000 series
RC - EA
type of drive
EA - electric
AA - pneumatic
HA - hydraulic
flow rate diameter

2 - 1/2
3 - 3/4
7 - 1
12
reel width
06 - 6 (152 mm)
12 - 12 (305 mm)
18 - 18 (457 mm)
22 - 22 (559 mm)
28 - 27 (686 mm)
pressure
L - 1000 PSI (69 bar)
M - 3000 PSI (207 bar)
12
power
12 - 12V DC
24 - 24V DC
10 - 115V AC
4A - 1,5 KM pneum.
6A - 4 KM pneum.
type of power
A - AC
D - DC
danger zone
explosion,
electric motor
marked Ex
1101

REELCRAFT hose reels
30000 series hand crank
Material:
Powder coated steel
30000 series hose reel designed for rugged, heavy duty

applications requiring long lengths of hose and large storage
capacity. All bolted construction (no welded elements), full flow
swivel, heavy steel frame and drum ensure longest service life.
Hand crank reels are widely used in industrial applications as well
as in field use. Hoses for 30000 series reels should be ordered
separately. BA version (bevel crank) is also available. 30000
series hose reels can also be assembled on carts and trailers.
code
for hose length

[m]
hose I.D.
[inch]
RC-CA32106 M118
RC-CA32112 M118
RC-CA32118 M118
RC-CA32128 M118
RC-CA33112 M118
RC-CA33118 M118
RC-CA33128 M118
RC-CA37118 L118
RC-CA37122 L118
RC-CA37128 L118
30
60
100
153
30
54
84
30
38
47
1/2
1/2
1/2
1/2
3/4
3/4
3/4
1
1
1
working
pressure
[bar]
207
207
207
207
207
207
207
21
21
21
weight
[kg]
18,00
21,00
25,00
30,00
21,00
25,00
30,00
26,00
28,00
30,00
connection
inlet / outlet
[BSP female]
1/2
1/2
1/2
1/2
3/4
3/4
3/4
1
1
1
REELCRAFT speciality products

G series - spring retractable grounding reels
Material:
Powder coated steel
Static discharge reels are used to ground equipment operating

in potentially explosives zones e.g. tank trucks or other vehicles
transporting highly flammable materials.
When properly clamped to the ground, the static discharge reel
dissipates static electrical build-up, reducing the chances of
sparking and the potential for explosion.
code
length
[mm]
width
[mm]
height
[mm]
cable
length
[m]
weight
[kg]
RC-G3050N
219
85
224
15
5,5
Nylon covered electric cable.
RC-GA3100N
235
110
248
30
10
Nylon covered electric cable.
1104
description

SAURO ROSSI spring retractable reels
SR-510008
SR-510020
SR-500015
SR-500020
SR-550660
SR-MINI
Spring driven reels for transfer of cold and hot water, oil, lubricant and other substances. Widely used in food,
chemical industry, production plants, service workshops, dairies, slaughterhouses, farms, petrol stations, sewage
treatment plant applications. Reels have a spring driven mechanism that allows a complete retraction each time it is
slightly pulled out. A MINI series hose reel is available with a PVC hose designed for air and water in the temperature
range from -10C to +60C. Other models are supplied without hose. Swing bracket available as a separate item.
code
SR-500015-A
SR-500015-X
SR-500020-A
SR-500020-X
SR-510008-A
SR-510008-X
SR-510020-A
SR-510020-X
SR-550660-A
SR-550660-X
SR-MINI
SR-968002-F
SR-968002-X
SR-968003-F
SR-968003-X
SR-968004-F
SR-968004-X
working
pressure
[bar]
thread inlet
[inch]
thread outlet
[inch]
hose I.D.
[inch]
250
1/2 male
1/2 female
1/2
250
1/2 male
1/2 female
1/2
250
1/2 male
1/2 female
1/2
250
1/2 male
1/2 female
1/2
200
1 male
1 female
1
200
1 male
1 female
1
200
1 male
1 female
1
200
1 male
1 female
1
250
1/2 male
3/8 female
3/8
250
1/2 female
3/8 female
3/8
30
1/4 female
1/4 male
8x12 mm
swing bracket for SR-550660-A
swing bracket for SR-550660-X
swing bracket for SR-500015-A, SR-500020-A, SR-510008-A
swing bracket for SR-500015-X, SR-500020-X, SR-510008-X
swing bracket for SR-510020-A
swing bracket for SR-510020-X
for hose length

[m]
material*
15
15
25
25
10
10
20
20
70
70
15
galvanised steel
AISI 304
galvanised steel
AISI 304
galvanised steel
AISI 304
galvanised steel
AISI 304
galvanised steel
AISI 304
PVC
* - reels made of powder coated galvanised steel are available in red colour
1105

ECODORA spring retractable reels
430 / 530 / 540 / 560 series
Material:
Carbon steel
Seal:
Viton
Spring driven hose reels designed to transfer cold and hot water,
oil, grease and other substances. Equipped with spring tested to
25.000 cycles (reel in/reel out). ECODORA hose reels are not
equipped with hose - it needs to be ordered separately. Swing
bracket is available as a separate item.
code
ED-430/20
ED-530/20
ED-540/20
ED-560/20
ED-430/30
ED-540/30
ED-430/05
ED-530/05
ED-540/05
hose length
[m]
hose I.D.
[mm]
15
25
20
30
18
30
1/2
1/2
3/4
1
3/8
3/8
working
efficiency
pressure
[l/min]
[bar]
100
75
100
75
100
150
100
150
200
30
200
30
swing bracket for 430 series
connection
inlet / outlet
[BSP female]
1/2
1/2
1/2
1/2
1
1
1
1
3/8
1/2
3/8
1/2
Basic dimensions of different series:
1106
series
430
186
140
196
226
115
450
420
460
530
203
153
220
258
115
550
510
560
540
300
218
228
268
190
550
510
573
560
488
399
238
272
368
522
510
578

ECODORA spring retractable reels
434 / 534 / 544 / 564 series
Material:
AISI 304 stainless steel
Hose reels designed for food, chemical industry as well as

applications where corrosion might occur. Equipped with
spring tested to 25000 cycles (reel in/reel out). Available in fully
stainless steel (all parts made of AISI 316) or stainless steel
fluid path (remaining elements made of carbon steel) material
versions. ECODORA hose reels are not equipped with hose - it
needs to be ordered separately. Swing bracket is available as
a separate item.
code
ED-434/20
ED-544/25
ED-544/20
ED-564/20
ED-434/30
ED-544/30
ED-534/35
ED-564/35
ED-430/06
ED-540/06
ED-530/06
hose length
[m]
hose I.D.
[inch]
15
30
20
30
18
30
25
50
1/2
1/2
3/4
1
3/8
3/8
3/8
3/8
working
efficiency
pressure
[l/min]
[bar]
100
75
100
75
100
150
100
150
200
30
200
30
400
40
400
40
sealing
Viton
Viton
Viton
Viton
Viton
Viton
PTFE
PTFE
connection
inlet / outlet
[BSP female]
1/2
1/2
1/2
1/2
1
1
1
1
3/8
1/2
3/8
1/2
3/8
1/2
3/8
1/2
Basic dimensions of different series:

series
434
186
140
196
226
115
450
420
460
534
203
153
220
258
115
550
510
560
544
300
218
228
268
190
550
510
573
564
488
399
238
272
368
522
510
578
1107

CRI REELS spring retractable reels
LG series
Material:
Carbon steel / plastic
LG series due to its extremely lightweight and compact
construction is an ideal solution for service vans, assembly lines,
workbenches, etc. Equipped with brass swivel joint and hose as
a standard. Suitable for both vertical and horizontal mounting.
code
hose length
[m]
hose I.D.
[inch]
CR- LG-LP-125-BGX
CR- LG-LP-320-BGX
8
7
1/4
3/8
working
pressure
[bar]
21
21
weight
[kg]
5,00
5,00
connection
inlet / outlet
[BSP female]
1/4
3/8
ALUMI - PRO series
Material:
Powder coated aluminium
Reel series constructed out of high quality aluminium. Ensures
the same durability and strength as steel reels but with twice as
low weight and additionally with increased corrosion resistance.
Due to lightweight and durability widely used in all branches of
industry. Equipped with brass swivel joint. Not equipped with
hose - it needs to be ordered separately.
code
for hose length

[m]
hose I.D.
[inch]
CR- P-LPL-125-AL-BGX
CR-P-LPL-325-AL-BGX
CR-P-LPL-350-AL-BGX
8
15
8
15
8
1/4
1/4
3/8
3/8
1/2
1108
working
pressure
[bar]
21
21
21
21
21
weight
[kg]
6,00
8,00
7,00
9,00
10,00
connection
inlet / outlet
[BSP female]
1/4
1/4
3/8
3/8
1/2"

EZ-COIL spring retractable reels
P series
SH series
T series
S series
Powder coated (blue colour) carbon steel hose reel designed for food, chemical industry as well as production
plants, service stations, etc. Equipped with patented controlled retraction system - EZ-Coil that retracts up to 80%
slower than conventional spring driven reels. The EZ-Coil was specifically designed and introduced to reduce
work place accidents, increase operator safety, extend hose, swivel and hose reel service life. Hose is connected
directly to swivel that facilitates assembly. Not equipped with hose - it needs to be ordered separately. For T series
left side or right side mounting is possible. 350 bar options of different series are available on request.
series
SH
T
S-left
code
hose length
[m]
hose I.D.
[inch]
working
pressure
[bar]
connection
inlet / outlet
[BSP]
weight
without hose
[kg]
CR-EZ-P-LPL-350-BGX
CR-EZ-P-LPL-450-BGX
CR-EZ-P-HPL-125-BGX
CR-EZ-SHL-N-4100-BGX
CR-EZ-SHL-N-550-BGX
CR-EZ-MPL-N-350-BGX
CR-EZ-TSHL-N-4100-BGX
CR-EZ-TMPL-N-550-BGX
CR-EZ-THPL-N-350-BGX
CR-EZ-SL15L-L325-BGX
CR-EZ-SL19L-L450-BGX
15
15
9
31
15
15
30
15
15
8
15
3/8
1/2"
1/4"
1/2"
3/4"
3/8
1/2'
3/4"
3/8
3/8
1/2"
21
21
350
21
21
210
21
105
280
21
21
3/8"
1/2"
1/4"
1/2"
3/4"
3/8
1/2"
3/4"
3/8
3/8
1/2"
16,00
22,00
20,00
30,00
25,00
24,00
36,00
34,00
30,00
8,00
13,00
1109
MACHINES AND ACCESSORIES - air guns

CEJN 208 air blowgun
code
connection
version
CJ-112080000 2)
without nozzle
CJ-112080100
90 mm bent nozzle
CJ-112080200
CJ-112080300 2)
1/4 BSP
female
90 mm bent removable
nozzle
removable nozzle with
flow regulator
CJ-112083100 1,2)
90 mm bent Star Tip

nozzle
CJ-112083200 1,2)
90 mm bent Star Tip

removable nozzle
code
1
3
4
5
6
9
11
12
10
8
13
description
General purpose blowgun designed
for air, water as well as non-explosive
fluids. Available in several versions
with possibility of nozzle exchange.
Lightweight and ergonomic construction ensures comfortable control and
operation. Wide range of additional accessories allows for usage in different
applications.
Material: POM (body), brass (valve).
Seal: NBR.
Working pressure: 16 bar (8 bar version
with flow control regulator).
Connection: 1/4 BSP female thread,
(available also with 1/4 NPT).
description
pic.
CJ-112080215
90 mm bent nozzle
CJ-112080216 2)
90 mm bent nozzle with flow regulator
CJ-112083215 1,2)
90 mm bent Star Tip nozzle
CJ-112080219
300 mm extension straight nozzle
CJ-112080220
500 mm extension straight nozzle
CJ-112080222 1)
400 mm bendable nozzle
CJ-112083219 1,2)
300 mm extension straight Star Tip nozzle
CJ-112083220
500 mm extension straight Star Tip nozzle
CJ-112089954 2)
air curtain nozzle
CJ-112089955
100 mm shield
CJ-112089956
rubber-tip nozzle, 14 mm
CJ-112089957
rubber-tip nozzle , 25 mm
CJ-112089958
rubber-tip nozzle, 34 mm
CJ-112089960
rubber-tip nozzle set
CJ-112089961 2)
bypass nozzle with pressure reductor
CJ-112089962 1,2)
silencer nozzle
10
1,2)
CJ-112089963 2)
venturi nozzle
11
CJ-112089964
rubber-tip nozzle with a thread for blowgun
12
CJ-112089965 1,2)
silencer nozzle with a thread for blowgun
13
1) sound intensity below 85 dB, according European Machinery Directive, paragraph 1.5.8.
2) according to OSHA 1-13.1 requirements.
CEJN Multiflow 210 air blowgun
1110
code
connection
CJ-112100400
CEJN 320 plug
CJ-112100450
1/4 BSP
female
description
General purpose blowgun designed for air, water as

well as non-explosive fluids. Lightweight and ergonomic design ensures comfortable control and operation. Adjustable flow settings and nozzle allow to adjust
the medium flow to particular application. Sound intensity according to OSHA requirements.
Material: POM, TPE, aluminium.
Seal: NBR.
Working pressure: 16 bar / 10 bar.
Working temp.: from -20C up to +60C (16 bar)
up to +80C (10 bar).

TEMA air blowgun
code
version
nozzle length
[mm]
connection size
female thread
[inch]
TA-G-B1200
standard
110
1/4
TA-G-B1200A
noise reduction
120
1/4
TA-G-B1200B
short
30
1/4
TA-G-B1200C
long
500
1/4
TA-G-B1211
protective shield
description
A general purpose blowgun for compressed air,
equipped with a highly durable shut-off valve. Corrosion resistant. The cover body made of impact resistant
plastic.
Working pressure: up to 15 bar.
Bursting pressure: 80 bar.
Working temperature: from -30C to +80C
EWO air blowgun
EWO 1
EWO 3
EWO 1L
code
connection
EW-26941
quick release coupling plug
EW-26911
6 mm hose tail
EW-26917
9 mm hose tail
EW-26918
13 mm hose tail
EW-47041
EW-47011
6 mm hose tail
EW-47017
9 mm hose tail
EW-47018
13 mm hose tail
EW-47040
1/4 female thread
EW-26941L
EW-26911L
6 mm hose tail
EW-26917L
9 mm hose tail
EW-26918L
13 mm hose tail
description
Compressed air blowgun.

Nozzle DN: 1.5 mm.
Working pressure: 2 6 bar.
Working temp.: from -10C up to +50C
Compressed air blowgun

with adjustable flow
Material: highly robust plastic.
Nozzle DN: 1,5 mm.
Compressed air gun with adjustable

flow and flow control valve.
Material: aluminium (casted).
Nozzle DN: 1,5 mm.
1111

EWO air blowgun
EWO 1E
code
connection
EW-26941E
EW-26911E
6 mm hose tail
EW-26917E
9 mm hose tail
EW-26918E
13 mm hose tail
EW-27011
6 mm hose tail
EW-27017
9 mm hose tail
EW-27041
EW-31911
6 mm hose tail
EW-31917
9 mm hose tail
EW-31941
EW-470K59
1/4 male (6 stream)
EW-470K61
M12x1,5 male (6 stream)
EW-470K58
1/4 (16 stream)
EW-470K60
M12x1,5 (16 stream)
code
2
3
4
5
7
6
8
9
11
1112
10
description
Compressed air and water gun with adjustable flow and flow control valve.
Material: aluminium (forged).
Nozzle DN: 1.5 mm.
Compressed air nozzle with a nozzle.

Working pressure.: 1 10 bar.
Flexible rubber nozzle for compressed

air transfer.
Working pressure: up to 6 bar.
Multistream flat nozzle for compressed

air transfer.
Material: blue polyamide.
Max. working pressure.: 6 bar.
description
pic.
EW-105K6
1.5 mm standard nozzle
EW-105K7
2 mm nozzle
EW-269K33
silencer nozzle
EW-269K45
injector nozzle (plastic 2 mm)
EW-269K59
injector nozzle (aluminium 1,5 mm)
EW-105K45
bicycle nozzle
EW-269K27
air shield nozzle
EW-470K37
Blowstar safety and silencing nozzle (without double nipple)
EW-470K38
double nipple (1/4xM12x1.25)
EW-470K39
Blowstar safety and silencing nozzle (with double nipple)
EW-470K12
extension nozzle 2.3 mm, bent, nickel-plated steel
EW-470K43
Safetystar extension nozzle, bent, nickel-plated steel,
EW-105K16A
extension nozzle 100 mm, bent, nickel-plated steel
EW-105K14A
EW-105K15A
EW-105K103
extension nozzle 100 mm, straight, nickel-plated steel
10
EW-105K104
10
EW-105K105
10
EW-105K107
10
EW-26915
70 mm protection air shield (between nozzle and gun)
11

EWO hand tyre inflator
code
fitting
EW-471221
lever-valve
EW-471223
clip
EW-471222
double-sided, push-on
EW-356221
lever-valve
EW-356223
clip
EW-356222
EW-356121
lever-valve
EW-356123
clip
EW-356122
code
fitting
EW-151200
lever-valve
EW-151260
clip
EW-151210
EW-151201
lever-valve
EW-151261
clip
EW-151211
working pressure
0 4 bar
(cars)
0 10 bar
(cars and lorries)
0 25 bar
(special vehicles,
EW-151253 * double-sided, push-on
planes)
EW-151243 *
lever-valve
description
The manual tyre inflator with 63 mm
diameter precision gauge (precision
class 2,5) in rubber protection cover.
Calibration not possible.
Material: polyamide.
Work. temp.: from -10C up to +50C.

Material: polyamide.

description

class 1.0) in rubber protection cover.
Available with three pressure ranges
with calibration option or without it.
* - only without calibration
1113

Automatic tyre inflator
AIRMATE / PNEUMATE
Material:
Casing - aluminium
Display - polycarbonate
Powered:
90 230 V / 50 60 Hz (adjustable)
Power:
16 W
Internal protection: IP 54
Accuracy:
0,5%
Weight:
2.5 kg
Dimensions:
240 x 100 mm
Working temp.:
Electronic tyre infiltrator for vehicles (max. inflation pressure for cars 5.5 bar, for lorries 10 bar). Allows to check
the actual pressure in the tyre and inflate it if necessary. After connection the LCD display shows the pressure.
Then infiltrator automatically inflates the tyre according to defined pressure value. Suitable for indoor and outdoor
use resistant to weather conditions. Available in two versions: AIRMATE for petrol stations and PNEUMATE with
more functions (e.g. nitrogen inflation) designed for service stations, vulcanizing shop, vehicle inspection stations,
etc. Supplied with PTB (Physikalische-Technische Bundesanstalt) certificate and CE marked. Hose with inflating
fitting, and other accessories need to be ordered separately.
EW-47710
max. inflation
pressure
[bar]
5,5
supply
pressure
[bar]
7 16
AIRMATE tyre infiltrator.
EW-47730
10
12 16
AIRMATE tyre infiltrator.

PNEUMATE tyre infiltrator.
code
description
EW-47720
10
12 16
EW-477K34
Rubber hose with fitting for tyre inflation DN 6, L = 10 m.
EW-477K29
PVC hose with fitting for tyre inflation DN 6, L = 10 m.
EW-477K35
PVC hose with fitting for tyre inflation DN 6,5, L = 10 m.
EW-477K43
PU spiral hose with fitting for tyre inflation DN 6,5, L = 5 m.
EW-477K42
PU spiral hose with fitting for tyre inflation DN 6,5 L = 2,5 m.
EW-477K31
Fitting for tyre inflation.
1114
MACHINES AND ACCESSORIES - protection and sealing

SPRING
Material: Galvanized spring steel
Characteristics: Protective spiral made of steel wire designed to protect hoses (cables) against abrasion, kinking
and crushing. Standard length 5 m.
code
I.D.
[mm]
distance between coils

[mm]
wire diameter
[mm]
RF-SPRING-10
RF-SPRING-12
RF-SPRING-14
RF-SPRING-15
RF-SPRING-17
RF-SPRING-19
RF-SPRING-20
RF-SPRING-22
RF-SPRING-24
RF-SPRING-25
RF-SPRING-27
RF-SPRING-29
RF-SPRING-30
RF-SPRING-33
RF-SPRING-34
RF-SPRING-37
RF-SPRING-40
RF-SPRING-42
RF-SPRING-46
RF-SPRING-48
RF-SPRING-50
10
12
14
15
17
19
20
22
24
25
27
29
30
33
34
37
40
42
46
48
50
5
5
5
5
5
5
5
6
6
6
6
6
6
10
10
10
10
10
10
10
10
1,6
1,6
1,6
1,6
1,6
1,6
1,6
2
2
2
2
2
2
3
3
3
3
3
3
3
3
1115

FLAT G
Material: Galvanized steel
Characteristics: Protective spiral made of steel band designed to protect hoses (cables) against abrasion,
kinking and crushing.
code
I.D.
[mm]
distance
between coils
[mm]
band thickness
[mm]
band width
[mm]
standard
length
[m]
RF-GFLAT-14
RF-GFLAT-16
RF-GFLAT-18
RF-GFLAT-20
RF-GFLAT-22
RF-GFLAT-24
14
16
18
20
22
24
1,57
1,57
1,57
1,57
1,57
1,57
0,8
0,8
0,8
0,8
0,8
0,8
6,35
6,35
6,35
6,35
6,35
6,35
10
10
10
10
10
10
304 B
Material: AISI 304

Type:
Standard
Characteristics: Steel braids are used as an external hose shield in order to protect hoses against mechanical
damage, abrasion, etc.
They can be clamped with clamping bands or ferrules.
1116
code
hose I.D.
[inch]
braid I.D.
[mm]
AT-304B-010
AT-304B-012
AT-304B-020
AT-304B-025
AT-304B-032
AT-304B-040
AT-304B-050
AT-304B-065
AT-304B-080
AT-304B-100
AT-304B-125
AT-304B-150
AT-304BB-200
AT-304BB-250
3/8
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
8
10
16,5
21,5
28,5
36
43,5
53
67,5
81
96
-

SPIRALINA
Material:
Rigid PVC (exhibits memory effect)
Characteristics: Protective spiral designed to protect hoses (cables) against abrasion and squeezing. Also
used to wrap group of hoses (cables) to form bundles. Resistant to weather influence, UV
radiation, ozone, flame (according to UL94VO), oil, diesel oil, water. Not conductive - surface
conductivity 1010
code
I.D.
[mm]
ME-SPIRALINAFX-013
ME-SPIRALINAFX-016
ME-SPIRALINAFX-020
ME-SPIRALINAFX-024
ME-SPIRALINAFX-027
ME-SPIRALINAFX-030
ME-SPIRALINAFX-035
ME-SPIRALINAFX-044
13
16
20
24
27
30
35
43,5
ME-SPIRALINA-056
ME-SPIRALINA-065
ME-SPIRALINA-080
56
64
81
O.D.
[mm]
band
thickness
[mm]
SPIRALINA FLEX
15,4
1,2
18,4
1,2
23,6
1,8
27,3
1,9
30,8
1,9
34,4
2,2
40
2,2
48
2,3
SPIRALINA
63
3,5
72,5
4,3
91
5
band
width
[mm]
range
diameter
[mm]
weight
[kg/m]
10
12
14,5
15
16
18
20,5
23
12 18
16 26
20 27
23 30
27 35
30 45
35 60
45 75
0,05
0,06
0,12
0,16
0,20
0,23
0,28
0,40
26
30
35
50 90
60 120
75 200
0,85
1,15
1,70
BINDING SPIRAL
Material:
Black polyethylene (PE)
Characteristics: Lightweight, very flexible protective spiral made of band cut from PE pipe. Designed to protect
electric cables and hoses and to wrap them to form bundles. Increases visibility of covered
hoses or cables.
code
O.D.
[mm]
band thickness
[mm]
band width
[mm]
coil length
[m]
SF-BINDING-06
SF-BINDING-08
SF-BINDING-10
SF-BINDING-12
SF-BINDING-15
SF-BINDING-20
SF-BINDING-25
SF-BINDING-32
6
8
10
12
15
20
25
32
1
1
1
1
1,25
1,7
2
2
5,5
5,5
8
8
10
12,5
12,5
15
100
50
50
50
50
25
25
25
1117

PROTECTOR
Material:
Polyethylene (HDPE)
Characteristics: Protective spiral designed to protect hoses (cables) against abrasion, impact and squeezing.
Also used to wrap a group of hoses (cables) in order to form bundles. Improves the visibility of
covered hoses or cables. Resistant to acids, oils, solvents and UV radiation. There are holes
at both ends of each spiral length (diameter 75 mm and more) made to join several protectors
together. Can be installed even after hose assembly installation. Supplied in 1, 1.5 and 6 m
lengths in yellow and black. A MINING-SPIRAL version is also available. It is designed for mining
industry (antistatic) with 60 and 110 mm in outside diameter in 2 m lengths.
code
I.D.
[mm]
O.D.
[mm]
SF-PROTECTOR-012
SF-PROTECTOR-016
SF-PROTECTOR-020
SF-PROTECTOR-025
SF-PROTECTOR-032
SF-PROTECTOR-050
SF-PROTECTOR-075
SF-PROTECTOR-090
SF-PROTECTOR-110
SF-PROTECTOR-140
9,6
13,4
16
20,6
27
43,2
66,2
80,2
99
127
12
16
20
25
32
50
75
90
110
140
band
thickness
[mm]
1,2
1,3
2
2,2
2,5
3,4
4,4
4,9
5,5
6,5
band
width
[mm]
10,5
12
20
25
22
30
45
45
50
55
weight
[kg/m]
coil length
[m]
hose O.D.
[mm]
0,04
0,06
0,09
0,15
0,19
0,34
0,73
1,21
1,76
2,51
25
25
25
25/50
25/50
25/50
20
20
15
10
13 18
18 24
24 28
28 40
40 55
55 70
70 90
80 120
120 150
Code examples:
SF-PROTECTOR-020Y
- yellow
SF-PROTECTOR-020BK - black
FLEX SPIRAL
Material:
Polyethylene (HDPE)
Characteristics: Extremely flexible variation of PROTECTOR spiral, with smaller band width and thinner wall.
For application in places where the ease of spiral installation on already mounted assemblies
is of highest importance. Supplied only in 25 m coils in yellow and black.
1118
code
O.D.
[mm]
band thickness
[mm]
band width
[mm]
weight
[kg/m]
coil length
[m]
SF-FLEX-020
SF-FLEX-025
SF-FLEX-032
SF-FLEX-050
SF-FLEX-075
20
25
32
50
75
1,6
1,7
2
2,6
3,2
16
19
22
24
35
0,08
0,10
0,18
0,35
0,65
25
25
25
25
20

SAFE SLEEVE
Material:
Black polypropylene
Protective sleeve of dense fabric for single hose or hose
assembly bundle protection in hydraulic or pneumatic
applications. Excellent abrasion (tested according to
EN ISO 12947-3), chemical and UV radiation resistance,
low electrical conductivity. Meets the requirements of EN
12999 and EN ISO 3457 concerning the protection in
case of oil burst caused by hose bursting.
code
I.D.
[mm]
standard length
[m]
SF-SLRD-017
SF-SLRD-023
SF-SLRD-027
SF-SLRD-030
SF-SLRD-036
SF-SLRD-039
SF-SLRD-046
SF-SLRD-055
SF-SLRD-062
SF-SLRD-078
SF-SLRD-109
SF-SLRD-125
17
23
27
30
36
39
46
55
62
78
109
125
50
50
50
50
50
50
50
50
50
50
50
50
SAFE STRIP
Material:
Black polypropylene
Strips made of dense fabric designed to bind hose
assemblies in bundles. Equipped with Velcro brand
fasteners. The buckle is made of stainless steel.
code
maximum bundle diameter

[mm]
SF-STRD-070
SF-STRD-100
SF-STRD-125
SF-STRD-155
SF-STRD-180
70
100
125
155
180
SAFE WRAP
Material: Polyamide fabric with

black polyurethane coating
Very firm sleeve with Velcro brand fasteners fastened
lengthwise. Very easy to install on hose bundles and
suitable for repeated use. Fully impervious to water.
Available in 40, 60, 80, 100 and 120 mm inside diameter
only on special request.
1119

GT 35
Material:
Polyester
Protective sleeve made of extremely dense polyester
fabric. Designed for single hose or hose assembly
bundle protection in hydraulic or pneumatic applications.
Good resistance to mechanical impact, oils and organic
products. Protects the hose and safeguards its operator
in case of oil burst caused by hose bursting.
code
I.D.
[mm]
width
[mm]
weight
[kg/m]
standard length
[m]
ZC-GT-035
ZC-GT-040
ZC-GT-045
ZC-GT-050
ZC-GT-055
ZC-GT-060
ZC-GT-065
ZC-GT-080
ZC-GT-090
ZC-GT-120
ZC-GT-150
20
22
25
28
32
35
38
45
50
70
90
35
40
45
50
55
60
65
80
90
120
150
0,027
0,032
0,034
0,038
0,042
0,045
0,048
0,060
0,065
0,096
0,112
100
100
100
100
100
100
100
100
100
100
100
GPVC
Material:
PVC
Protective sleeve made of PVC. Designed for single
hose or hose assembly bundle protection in hydraulic
or pneumatic applications. Protects the hose and
safeguards its operator in case of oil burst caused by
hose bursting.
1120
code
I.D.
[mm]
wall thickness
[mm]
weight
[kg/m]
standard length
[m]
ZC-GPVC-10
ZC-GPVC-16
ZC-GPVC-20
ZC-GPVC-22
ZC-GPVC-25
ZC-GPVC-25S
ZC-GPVC-28
ZC-GPVC-30
ZC-GPVC-30S
ZC-GPVC-33
ZC-GPVC-33S
ZC-GPVC-38
ZC-GPVC-38S
ZC-GPVC-40
ZC-GPVC-45
ZC-GPVC-50
ZC-GPVC-55
10
16
20
22
25
25
28
30
30
33
33
38
38
40
45
50
55
0,5
0,5
0,6
0,6
0,6
1,5
0,6
0,6
1,5
0,7
1,5
0,7
1,5
0,7
0,7
0,7
0,7
0,026
0,039
0,058
0,063
0,072
0,157
0,082
0,087
0,187
0,104
0,218
0,135
0,285
0,141
0,144
0,167
0,184
150
100
100
100
100
100
100
50
50
50
50
50
50
50
50
50
50

CABLE ISOL
Reinforcement: Vulcanized synthetic cord

Internal layer:
Black SBR rubber
Characteristics: Thin-walled protection hose.

code
I.D.
[mm]
O.D.
[mm]
weight
[kg/m]
standard length
[m]
IV-CABLEISOL-19/22
IV-CABLEISOL-20/23
IV-CABLEISOL-22/24
IV-CABLEISOL-22/25
IV-CABLEISOL-25/27
IV-CABLEISOL-25/28
IV-CABLEISOL-28/31
IV-CABLEISOL-32/35
IV-CABLEISOL-40/43
IV-CABLEISOL-45/48
19
20
22
22
25
25
28
32
40
45
22
23
24
25
27
28
31
35
43
48
0,12
0,12
0,10
0,14
0,11
0,15
0,17
0,19
0,24
0,27
40
40
40
40
40
40
40
40
40
40
COOLCABLE
Internal layer:
Reinforcement:
External layer:
Working temp.:
Black SBR/NR rubber

Vulcanized synthetic cord
Black SBR/NR rubber
Characteristics: Thin-walled insulating hose designed to cool electric cables in automatic welding systems.
code
I.D.
[mm]
O.D.
[mm]
IV-COOLCABLE-12
IV-COOLCABLE-14
IV-COOLCABLE-15
IV-COOLCABLE-18
IV-COOLCABLE-20
IV-COOLCABLE-25
IV-COOLCABLE-28
IV-COOLCABLE-30
IV-COOLCABLE-35
IV-COOLCABLE-38
IV-COOLCABLE-42
IV-COOLCABLE-48
IV-COOLCABLE-55
12
14
15
18
20
25
28
30
35
38
42
48
55
22
21
22
28
30
33
35
40
45
47
50
60
65
working
pressure
[bar]
10
10
10
10
10
10
10
10
10
10
10
10
10
theoretical
bursting press.
[bar]
30
30
30
30
30
30
30
30
30
30
30
30
30
weight
[kg/m]
0,35
0,25
0,26
0,47
0,51
0,45
0,44
0,72
0,77
0,72
0,70
1,30
1,16
standard
length
[m]
40
40
40
40
40
40
40
40
40
40
40
40
40
1121

PYROJACKET
PYROTAPE
PYROSIL
Material:
Glass fibre with silicone coating

in iron oxide red colour
Up to +1090C for 15 20 minutes
Up to +1650C for 15 30 seconds
For thermal protection of hoses, cables and ropes.
Resistant to abrasion, oils, fuels and the majority of
industrial chemicals. Widely used in steel melting plants,
steel mills, glass works and foundries - molten metal or
glass splashes are shed by the coating immediately.
Also used to insulate steam and hot oil installations protection against burns and energy loses. The variation
meant for aviation made according to SAE Aerospace
Standard 1072D.
Both PYROTAPE and self-bonding PYROSIL tape are
perfect for use as an end sealant of PYROJACKET
shield at the ends of assemblies and for any object of
irregular shape .
Also available as a protective sheet - PYROBLANKET.
PYROJACKET
PYROTAPE
code
band width
[mm]
roll length
[m]
FQ-PT-025
25
15 or 30
FQ-PT-050
50
15 or 30
FQ-PT-075
76
15 or 30
FQ-PT-100
FQ-PT-125
102
127
15 or 30
15 or 30
PYROSIL
code
band width
[mm]
FQ-PST-25/05
FQ-PST-38/15
25
38
1122
tape
thickness
[mm]
0,5
1,5
roll length
[m]
11
11
code
coating internal
diameter
[mm]
standard
length
[m]
FQ-PJ-008
FQ-PJ-010
FQ-PJ-011
FQ-PJ-013
FQ-PJ-016
FQ-PJ-019
FQ-PJ-022
FQ-PJ-025
FQ-PJ-029
FQ-PJ-032
FQ-PJ-035
FQ-PJ-038
FQ-PJ-041
FQ-PJ-044
FQ-PJ-051
FQ-PJ-057
FQ-PJ-064
FQ-PJ-070
FQ-PJ-076
FQ-PJ-083
FQ-PJ-089
FQ-PJ-095
FQ-PJ-102
FQ-PJ-114
FQ-PJ-127
8
10
11
13
16
19
22
25
29
32
35
38
41
44
51
57
64
70
76
83
89
95
102
114
127
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30
30

SILCO SLEEVE
SILCO TAPE
SILCO END SEAL WRAP
Material:

SILCO SLEEVE thermal sleeve is designed to protect
hoses, cables and ropes from the hazards of high heat
and occasional flame. Withstands a molten splash at
+1204C. Manufactured of knitted fibreglass yarns.
Resistant to hydraulic fluids, lubricating oils and fuels.
Insulates against energy loss in piping and hoses and
protects employees from burns.
SILCO TAPE is designed to protect hoses, cables of
relatively big diameters, objects with irregular shape
as well as hoses already connected in an installation without the need of its disassembly.
Self-adhesive SILCO END SEAL WRAP tape allows for
quick and neat connection of SILCO SLEEVE fire sleeve
with the surface of hose being protected.
SILCO SLEEVE
SILCO TAPE
code
band width
[mm]
roll length
[m]
DV-ST-025
25
30,48
DV-ST-050
50
30,48
DV-ST-075
76
30,48
DV-ST-100
DV-ST-125
102
127
30,48
30,48
SILCO END SEAL WRAP

code
band width
[mm]
DV-SESW-25/05
DV-SESW-38/05
25
38
tape
thickness
[mm]
0,5
0,5
roll length
[m]
10,98
10,98
code
coating internal
diameter
[mm]
standard
length
[m]
DV-SS-010
DV-SS-013
DV-SS-016
DV-SS-019
DV-SS-022
DV-SS-025
DV-SS-029
DV-SS-032
DV-SS-035
DV-SS-038
DV-SS-041
DV-SS-044
DV-SS-051
DV-SS-057
DV-SS-064
DV-SS-070
DV-SS-076
DV-SS-083
DV-SS-089
DV-SS-095
DV-SS-102
DV-SS-114
DV-SS-127
10
13
16
19
22
25
29
32
35
38
41
44
51
57
64
70
76
83
89
95
102
114
127
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
30,48
1123

PYROBLANKET
Material:

Thermal protective shield in a sheet version. Resistant
to abrasion, oils, fuels and the majority of industrial
chemicals. Widely used in steel melting plants, steel
mills, glass works and foundries - molten metal or glass
splashes are shed by the coating immediately.
Available in two variations:
PYROBLANKET 32 - glass fabric coated both sides with
iron-oxide silicone compound, with 1085 g/m2 basis
weight. Primarily used as weld splatter protection as
well as for lighter application in foundries. Available in
roll widths of 915 and 1525 mm;
PYROBLANKET 96 - thick glass fabric coated one
side with thick layer of iron-oxide silicone compound,
with 3260 g/m2 basis weight. Primarily used to make
protective covers in foundries - the external compound
layer sheds molten metal almost immediately. Available
in roll width of 1016 mm.
EAF CABLE COVER
Material:

Designed for thermal protection of water-cooled power
cables feeding electric arc furnaces in steel plants. Made
of PYROBLANKET 96 fabric equipped with a Nomex
hook and loop closure system to enable installation
without disconnecting the cables. Resistant to heat
radiation, abrasion, impact, flame and molten metal
splash occurring during furnace charging operations.
The cover is both non-conductive and not influenced by
furnace magnetic induction. Available in a full diameter
range up to 12 (305 mm).
PYROSEALANT
Material:
Amorphous silica, polydimethylsiloxane,

iron oxide and curing
catalyst compound
High temperature resistant, semi-liquid sealing compound
that cures to a tack-free state in 1015 minutes, and
completely within approximately 18 hours. Supplied in
310 ml tubes.
FQ-PS-310
1124

SILICAFLEX
Material:
Silica fibre
(silicon dioxide)
Thermal protective shield available as a sheet, sleeve
or tape. Very strong and resistant to chemicals (except
for hydrofluoric acid, phosphoric acid and strong bases).
Completely resistant to flames. High content of pure
silica (over 96%) guarantees excellent heat resistance,
flexibility and minimum shrinkage. Electric insulation is
its further property.
SILICAFLEX BLANKET available in thickness of: 0.76
mm and 1.27 mm and standard width of 915 mm.
SILICAFLEX SLEEVE available in a diameter range from
3/8 (10 mm) to 7 (178 mm).
SILICAFLEX TAPE AB coated one side with pressure
sensitive backing that cures when the tape is stretched.
Available in two standard widths of: 51 mm and 102 mm.
SILICAFLEX BLANKET
code
FQ-SFB18-36
FQ-SFB32-36
SILICAFLEX SLEEVE
band
width
[mm]
915
915
band
thickness
[mm]
0,76
1,27
length
[m]
up to 45
up to 45
SILICAFLEX TAPE AB
code
band width
[mm]
standard length
[m]
FQ-STAB-02
FQ-STAB-04
51
102
45
45
code
FQ-SFHD-06
FQ-SFHD-08
FQ-SFHD-12
FQ-SFHD-16
FQ-SFHD-24
FQ-SFHD-32
FQ-SFHD-48
FQ-SFHD-64
FQ-SFHD-80
FQ-SFHD-96
FQ-SFHD-116
coating internal
diameter
[mm]
10
13
19
25
38
51
76
102
127
152
178
standard
length
[m]
15
15
15
15
15
15
15
15
15
15
15
THERMOSLEEVE S
Material:
Fibre glass
Thermal protective sleeve made of heat cleaned and
coated with an acrylic saturant glass fibre braid. There
are no loose, falling out fibres in the braid. The handling
and abrasion resistance characteristics are very good.
The construction of the braid allows for expansion and
contraction by 25% to fit it to the diameter required.
Available in four diameter sizes: 16, 22, 35 and 70 mm.
1125

FEP heat shrinkable sleeve
Material:
Fluorinated ethylene propylene
Max. working temp.: +204C
Shrink temp.:
From +121C up to +204C
(shrinkage range 2025%)
Hardness:
53 Shore (A)
Density:
2,15 g/cm3
Characteristics: FEP shrinkable sleeve, highly resistant to kinking and cracking, for application in numerous
branches of industry. Long service life can be counted in years, even when it operates under
high pressure. Smooth surface prevents dirt sticking. Excellent thermal resistance. Widely used
in industry (e.g. as a sleeve for rollers in paper production or in printing houses). Certified by
FDA. Available in sizes from 61 cm to 915 cm.
code
VE-HFE6-10020-02
VE-HFE6-10020-03
VE-HFE6-10020-04
VE-HFE6-10020-05
VE-HFE6-10020-06
VE-HFE6-10020-07
VE-HFE6-10020-08
VE-HFE6-10020-09
VE-HFE6-10020-10
VE-HFE6-12520-02
VE-HFE6-12520-03
VE-HFE6-12520-04
VE-HFE6-12520-05
VE-HFE6-12520-06
VE-HFE6-12520-07
VE-HFE6-12520-08
VE-HFE6-12520-09
VE-HFE6-12520-10
VE-HFE6-15020-02
VE-HFE6-15020-03
VE-HFE6-15020-04
VE-HFE6-15020-05
VE-HFE6-15020-06
VE-HFE6-15020-07
VE-HFE6-15020-08
VE-HFE6-15020-09
VE-HFE6-15020-10
VE-HFE6-20020-02
VE-HFE6-20020-03
VE-HFE6-20020-04
VE-HFE6-20020-05
VE-HFE6-20020-06
VE-HFE6-20020-07
VE-HFE6-20020-08
VE-HFE6-20020-09
VE-HFE6-20020-10
1126
DN
[inch]
1.1/4
1.1/2
length
[cm]
61
91
122
152
183
213
244
274
305
61
91
122
152
183
213
244
274
305
61
91
122
152
183
213
244
274
305
61
91
122
152
183
213
244
274
305
shrinkage
range
[mm]
22 26
27 32
33 43
44 53
code
VE-HFE6-25020-02
VE-HFE6-25020-03
VE-HFE6-25020-04
VE-HFE6-25020-05
VE-HFE6-25020-06
VE-HFE6-25020-07
VE-HFE6-25020-08
VE-HFE6-25020-09
VE-HFE6-25020-10
VE-HFE6-30020-02
VE-HFE6-30020-03
VE-HFE6-30020-04
VE-HFE6-30020-05
VE-HFE6-30020-06
VE-HFE6-30020-07
VE-HFE6-30020-08
VE-HFE6-30020-09
VE-HFE6-30020-10
VE-HFE6-35020-02
VE-HFE6-35020-03
VE-HFE6-35020-04
VE-HFE6-35020-05
VE-HFE6-35020-06
VE-HFE6-35020-07
VE-HFE6-35020-08
VE-HFE6-35020-09
VE-HFE6-35020-10
VE-HFE6-40020-02
VE-HFE6-40020-03
VE-HFE6-40020-04
VE-HFE6-40020-05
VE-HFE6-40020-06
VE-HFE6-40020-07
VE-HFE6-40020-08
VE-HFE6-40020-09
VE-HFE6-40020-10
DN
[inch]
2.1/2
3.1/2
length
[cm]
61
91
122
152
183
213
244
274
305
61
91
122
152
183
213
244
274
305
61
91
122
152
183
213
244
274
305
61
91
122
152
183
213
244
274
305
shrinkage
range
[mm]
54 67
68 74
75 92
93 108

FEP heat shrinkable sleeve
Table continuation:
code
VE-HFE6-50020-02
VE-HFE6-50020-03
VE-HFE6-50020-04
VE-HFE6-50020-05
VE-HFE6-50020-06
VE-HFE6-50020-07
VE-HFE6-50020-08
VE-HFE6-50020-09
VE-HFE6-50020-10
VE-HFE6-60020-02
VE-HFE6-60020-03
VE-HFE6-60020-04
VE-HFE6-60020-05
VE-HFE6-60020-06
VE-HFE6-60020-07
VE-HFE6-60020-08
VE-HFE6-60020-09
VE-HFE6-60020-10
VE-HFE6-70020-02
VE-HFE6-70020-03
VE-HFE6-70020-04
VE-HFE6-70020-05
VE-HFE6-70020-06
VE-HFE6-70020-07
VE-HFE6-70020-08
VE-HFE6-70020-09
VE-HFE6-70020-10
VE-HFE6-80020-02
VE-HFE6-80020-03
VE-HFE6-80020-04
VE-HFE6-80020-05
VE-HFE6-80020-06
VE-HFE6-80020-07
VE-HFE6-80020-08
VE-HFE6-80020-09
VE-HFE6-80020-10
VE-HFE6-90020-02
VE-HFE6-90020-03
VE-HFE6-90020-04
VE-HFE6-90020-05
VE-HFE6-90020-06
VE-HFE6-90020-07
VE-HFE6-90020-08
VE-HFE6-90020-09
VE-HFE6-90020-10
DN
[inch]
length
[cm]
61
91
122
152
183
213
244
274
305
61
91
122
152
183
213
244
274
305
61
91
122
152
183
213
244
274
305
61
91
122
152
183
213
244
274
305
61
91
122
152
183
213
244
274
305
shrinkage
range
[mm]
109 130
131 150
151 176
177 203
204 241
code
VE-HFE6-10520-02
VE-HFE6-10520-03
VE-HFE6-10520-04
VE-HFE6-10520-05
VE-HFE6-10520-06
VE-HFE6-10520-07
VE-HFE6-10520-08
VE-HFE6-10520-09
VE-HFE6-10520-10
VE-HFE6-12025-02
VE-HFE6-12025-03
VE-HFE6-12025-04
VE-HFE6-12025-05
VE-HFE6-12025-06
VE-HFE6-12025-07
VE-HFE6-12025-08
VE-HFE6-12025-09
VE-HFE6-12025-10
VE-HFE6-13025-02
VE-HFE6-13025-03
VE-HFE6-13025-04
VE-HFE6-13025-05
VE-HFE6-13025-06
VE-HFE6-13025-07
VE-HFE6-13025-08
VE-HFE6-13025-09
VE-HFE6-13025-10
VE-HFE6-14025-02
VE-HFE6-14025-03
VE-HFE6-14025-04
VE-HFE6-14025-05
VE-HFE6-14025-06
VE-HFE6-14025-07
VE-HFE6-14025-08
VE-HFE6-14025-09
VE-HFE6-14025-10
VE-HFE6-16525-02
VE-HFE6-16525-03
VE-HFE6-16525-04
VE-HFE6-16525-05
VE-HFE6-16525-06
VE-HFE6-16525-07
VE-HFE6-16525-08
VE-HFE6-16525-09
VE-HFE6-16525-10
DN
[inch]
10.1/2
12
13
14
16.1/2
length
[cm]
61
91
122
152
183
213
244
274
305
61
91
122
152
183
213
244
274
305
61
91
122
152
183
213
244
274
305
61
91
122
152
183
213
244
274
305
61
91
122
152
183
213
244
274
305
shrinkage
range
[mm]
242 266
267 302
303 343
344 416
417 466
1127

STOPFLEX safety system
STOPFLEX safety system protects hose assembly operators against injury, and machinery against damage when
the hose is accidentally separated from its fitting. The disconnected hose is held by the cable. A band, equipped
with a rubber gasket, remains perfectly secured, simultaneously allowing the hose to swell according to the working
pressure. The system is designed for hydraulic assemblies with several types of fittings (metric, imperial, flanged,
etc.).
An exemplary STOPFLEX safety system attached to hydraulic hose with O.D. = 24.6 mm is shown below. The
assembly also includes DKOS fitting with M24x1.5 female thread screwed to the connector.
STOPFLEX 2425 mm band

Code: OP-SF/O-24/25N
STOPFLEX safety cable

DIN 22.5 mm, L= 300 mm
Code: OP-SF/DIN-22
In case of hose disconnection from its fitting, STOPFLEX safety system holds the hose closely to its original place
of connection, thus the whip effect can be avoided. The system has been tested using hose under maximum
working pressure, described in accordance with standards: EN 853, EN 854, EN 855, EN 856, SAE J517.
Proper and safe performance of STOPFLEX safety system is guaranteed only under condition that the working
pressure given in standards above is not exceeded.
1128

picture
yoke
thickness
s
[mm]
cable
length
L
[mm]
max.
pressure
use
[bar]
code
yoke I.D.
d
[mm]
OP-SF/DIN-14
14,5
450
8L - 1/4
OP-SF/DIN-17
17
445
8S - 10L - 3/8
usage
OP-SF/DIN-18
18,5
OP-SF/DIN-20
20,5
10S - 12L
OP-SF/DIN-22
22,5
OP-SF/DIN-24
24,5
OP-SF/DIN-26
26,5
OP-SF/DIN-30
30,5
OP-SF/DIN-34
34
OP-SF/DIN-36
36,5
25S - 28l
OP-SF/DIN-42
42,5
30S - 1.1/4
OP-SF/DIN-45
45,5
OP-SF/DIN-49
49
OP-SF/DIN-52
52,5
385
38S - 42L
OP-SF/DIN-60
60
350
OP-SF/SAE-08
8,5
300
2
SAE 1/2 3000 PSI,
SAE 1/2 6000 PSI
OP-SF/SAE-10/300
10,5
300
OP-SF/SAE-10
10,5
OP-SF/SAE-12
12,5
OP-SF/SAE-14
14,5
OP-SF/SAE-16
16,5
OP-SF/SAE-20
20,5
OP-SF/SAE-25
25
OP-SF/SAE-32
32
OP-SF/V
13
12S
300
14S - 15L - 1/2

16S - 5/8
18L - 3/4
420
20S - 22L
1
2,5
35L
450
1.1/2
415
SAE 3/4 3000 PSI
420
4
450
SAE 1-1.1/4 3000 PSI,

SAE 3/4 6000 PSI
SAE 1.1/2-2 3000 PSI,
SAE 1 6000 PSI
SAE 1.1/4 6000 PSI
SAE 1.1/2 6000 PSI
350
8
550
450
SAE 2 6000 PSI

-
210
420
general purpose
1129

picture
code
d min.
[mm]
D max.
[mm]
OP-SF/O-11/11,5N
OP-SF/O-12/12,5N
OP-SF/O-13/13,5N
OP-SF/O-14/15N
OP-SF/O-16/17N
OP-SF/O-17/18N
OP-SF/O-18/19N
OP-SF/O-20/21N
OP-SF/O-21/22N
OP-SF/O-22/23N
OP-SF/O-24/25N
OP-SF/O-25/26N
OP-SF/O-26/27N
OP-SF/O-27/28N
OP-SF/O-28/29N
OP-SF/O-30/31N
OP-SF/O-32/33N
OP-SF/O-34/35N
OP-SF/O-36/37N
OP-SF/O-38/39N
OP-SF/O-39/40N
OP-SF/O-40/41N
11
12
13
14
16
17
18
20
21
22
24
25
26
27
28
30
32
34
36
38
39
40
11,5
12,5
13,5
15
17
18
19
21
22
23
25
26
27
28
29
31
33
35
37
39
40
41
code
d min.
[mm]
D max.
[mm]
OP-SF/O-42/43N
OP-SF/O-43/44N
OP-SF/O-44/45N
OP-SF/O-45/47N
OP-SF/O-48/50N
OP-SF/O-51/53N
OP-SF/O-53/54N
OP-SF/O-54/56N
OP-SF/O-57/59N
OP-SF/O-60/62N
OP-SF/O-63/65N
OP-SF/O-66/68N
OP-SF/O-69/71N
OP-SF/O-72/74N
OP-SF/O-75/77N
OP-SF/O-78/80N
OP-SF/O-81/83N
OP-SF/O-84/86N
OP-SF/O-87/89N
OP-SF/O-90/92N
OP-SF/O-93/95N
42
43
44
45
48
51
53
54
57
60
63
66
69
72
75
78
81
84
87
90
93
43
44
45
47
50
53
54
56
59
62
65
68
71
74
77
80
83
86
89
92
95
WHIPCHEK safety system

A safety cable protecting against the effects of accidental hose disconnection. Made of galvanised steel. AC and
BC variations are equipped with copper sleeves - for coal mining applications.
picture
1130
code
minimum
hose diameter
[mm]
maximum
hose diameter
[mm]
strength
[kG]
AC-WHIPCHEK-A
13
32
588
AC-WHIPCHEK-B
38
75
2350
AC-WHIPCHEK-AC
13
32
588
AC-WHIPCHEK-BC
38
75
2350

FLOWSAFE
Material:
Net buoyancy:
Weight:
Volume:
Bacell - special foam, made from EVA plastic

16 kg
2 kg
18 dm3
FLOWSAFE floating devices designed to fit all hoses for offshore applications especially supply hoses used between
ships and rigs. With floats on supply hoses, the transfer between ships and rigs becomes much safer. The hose
stays afloat so it is clearly visible, which prevents its damage by the ships propeller and avoids the problem of
the ship becoming unable to manoeuvre. The floats protect the hose against wear and tear and therefore they are
excellent fenders for both delivery hoses (without steel wire) and suction-delivery hoses (with steel wire) of 3, 4
and 5 in diameter. There are plastic bands placed in the grooves of the floats so they can be easily fastened. When
the floating devices are applied for the delivery hoses a special wire strap should be used. The strap prevents the
float from being displaced when the hose is being handled and without pressure. The floats are flexible, do not sink
or absorb any water (the cells of foam are closed in 100%). They do not shrink or deform. UV radiation resistant.
picture
dimensions
code
hose I.D.
[inch]
TE-90620-48
68
94
230
80
490
600
TE-90620-64
55
120
230
90
182
600
TE-90620-80
53
143
250
90
182
600
description
code
float size
[inch]
wire diameter
[mm]
wire length
[mm]
Stainless steel, plastic coated cord

clamping for delivery hoses
TE-90622-01
3 and 4
480
TE-90622-02
640
MINIFLOAT
Material:
Bacell - special foam, made from EVA plastic
Net buoyancy: 3 kg
Weight:
0,42 kg
MINIFLOAT floating devices designed for 4 and 5 diameter hoses (both delivery and suction-delivery hoses).
They are threaded on a hose and set close together so as to obtain required buoyancy. The floats are flexible, do
not sink or absorb any water (the cells of foam are closed in 100%). They do not shrink or deform. UV radiation
resistant. A unique version of floats that reflects both light according to SOLAS requirements and UV radiation (so
called dark light) - visible in hard weather conditions, available on special request.
picture
dimensions
code
hose I.D.
[inch]
TE-90620-48
68
94
230
80
490
600
TE-90620-64
55
120
230
90
182
600
1131

API ring gaskets
Steel sealing rings designed for connection and sealing of specially skived grooved flanges. Used in high pressure
and high temperature connections. Manufactured of carbon steel. Made of cast iron or stainless steel versions
available on request. Meets the requirements of API-6A.
R type
Sealing ring with octagonal cross-section. Exhibits better sealing of the connection than ring gaskets based on
oval cross-section. Order should be consulted with Sales or Technical Department of TUBES INTERNATIONAL.
Working pressure up to 700 bar. Working temperature (carbon steel) from -40C up to +500C.
code
HL-RO-020
HL-RO-023
HL-RO-024
HL-RO-026
HL-RO-027
HL-RO-031
HL-RO-035
HL-RO-037
HL-RO-039
HL-RO-041
HL-RO-044
HL-RO-045
HL-RO-046
HL-RO-047
HL-RO-049
HL-RO-050
HL-RO-053
HL-RO-054
HL-RO-057
HL-RO-063
HL-RO-065
HL-RO-066
HL-RO-069
HL-RO-070
HL-RO-073
HL-RO-074
1132
dimensions [inch]
P
2,688
3,250
3,750
4,000
4,250
4,875
5,375
5,875
6,375
7,125
7,625
8,313
8,313
9,000
10,625
10,625
12,750
12,750
15,000
16,500
18,500
18,500
21,000
21,000
23,000
23,000
A
0,313
0,438
0,438
0,438
0,438
0,438
0,438
0,438
0,438
0,438
0,438
0,438
0,500
0,750
0,438
0,625
0,438
0,625
0,438
1,000
0,438
0,625
0,438
0,750
0,500
0,750
B
0,56
0,69
0,69
0,69
0,69
0,69
0,69
0,69
0,69
0,69
0,69
0,69
0,75
1,00
0,69
0,88
0,69
0,88
0,69
1,31
0,69
0,88
0,69
1,00
0,75
1,00
H
0,50
0,63
0,63
0,63
0,63
0,63
0,63
0,63
0,63
0,63
0,63
0,63
0,69
0,94
0,63
0,81
0,63
0,81
0,63
1,25
0,63
0,81
0,63
0,94
0,69
0,94
C
0,206
0,305
0,305
0,305
0,305
0,305
0,305
0,305
0,305
0,305
0,305
0,305
0,341
0,485
0,305
0,413
0,305
0,413
0,305
0,681
0,305
0,413
0,305
0,485
0,341
0,485
R1
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,09
0,06
0,06
0,06
0,06
0,06
0,06
E
0,25
0,31
0,31
0,31
0,31
0,31
0,31
0,31
0,31
0,31
0,31
0,31
0,38
0,50
0,31
0,44
0,31
0,44
0,31
0,62
0,31
0,44
0,31
0,50
0,38
0,50
F
0,344
0,469
0,469
0,469
0,469
0,469
0,469
0,469
0,469
0,469
0,469
0,469
0,531
0,781
0,469
0,656
0,469
0,656
0,469
1,063
0,469
0,656
0,469
0,781
0,531
0,781
R2
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,06
0,06
0,03
0,06
0,03
0,06
0,03
0,09
0,03
0,06
0,03
0,06
0,06
0,06

API ring gaskets
RX type
RX type sealing ring is interchangeable with R type. Working pressure up to 750 bar. Working temperature (carbon
steel) from -40C up to +500C.
code
HL-RX-020
HL-RX-023
HL-RX-024
HL-RX-025
HL-RX-026
HL-RX-027
HL-RX-031
HL-RX-035
HL-RX-037
HL-RX-039
HL-RX-041
HL-RX-044
HL-RX-045
HL-RX-046
HL-RX-047
HL-RX-049
HL-RX-050
HL-RX-053
HL-RX-054
HL-RX-057
HL-RX-073
HL-RX-074
HL-RX-210
dimensions [inch]
P
2,688
3,250
3,750
4,000
4,000
4,250
4,875
5,375
5,875
6,375
7,125
7,625
8,313
8,313
9,000
10,625
10,625
12,750
12,750
15,000
23,000
23,000
3,500
OD
3,000
3,672
4,172
4,313
4,406
4,656
5,297
5,797
6,297
6,797
7,547
8,047
8,734
8,750
9,656
11,047
11,156
13,172
13,281
15,422
23,469
23,656
3,844
A
0,344
0,469
0,469
0,344
0,469
0,469
0,469
0,469
0,469
0,469
0,469
0,469
0,469
0,531
0,781
0,469
0,656
0,469
0,656
0,469
0,531
0,781
0,375
C
0,182
0,254
0,254
0,182
0,254
0,254
0,254
0,254
0,254
0,254
0,254
0,254
0,254
0,263
0,407
0,254
0,335
0,254
0,335
0,254
0,263
0,407
0,213
H
0,125
0,167
0,167
0,125
0,167
0,167
0,167
0,167
0,167
0,167
0,167
0,167
0,167
0,188
0,271
0,167
0,208
0,167
0,208
0,167
0,208
0,271
0,125
R1
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,06
0,09
0,06
0,06
0,06
0,06
0,06
0,06
0,09
0,03
E
0,25
0,31
0,31
0,25
0,31
0,31
0,31
0,31
0,31
0,31
0,31
0,31
0,31
0,38
0,50
0,31
0,44
0,31
0,44
0,31
0,38
0,50
0,25
F
0,344
0,469
0,469
0,344
0,469
0,469
0,469
0,469
0,469
0,469
0,469
0,469
0,469
0,531
0,781
0,469
0,656
0,469
0,656
0,469
0,531
0,781
0,750
R2
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,03
0,06
0,06
0,03
0,06
0,03
0,06
0,03
0,06
0,06
0,03
1133

API ring gaskets
BX type
BX type sealing ring can only be used for flanges and grooves of API BX type. BX model has an opening allowing for
pressure balance. Working pressure up to 1500 bar. Working temperature (carbon steel) from -40C up to +500C.
code
HL-BX-150
HL-BX-151
HL-BX-152
HL-BX-153
HL-BX-154
HL-BX-155
HL-BX-156
HL-BX-157
HL-BX-158
HL-BX-159
HL-BX-160
HL-BX-161
HL-BX-162
HL-BX-163
HL-BX-164
HL-BX-165
HL-BX-166
HL-BX-167
HL-BX-168
HL-BX-169
HL-BX-170
HL-BX-171
HL-BX-172
HL-BX-303
1134
dimensions [inch]
OD
2,842
3,008
3,334
3,974
4,600
5,825
9,367
11,593
13,860
16,800
15,850
19,347
18,720
21,896
22,463
24,595
25,198
29,896
30,128
6,831
8,584
10,529
13,113
33,573
H
0,366
0,379
0,403
0,448
0,488
0,560
0,733
0,826
0,911
1,012
0,938
1,105
0,560
1,185
1,185
1,261
1,261
1,412
1,412
0,624
0,560
0,560
0,560
1,494
A
0,366
0,379
0,403
0,448
0,488
0,560
0,733
0,826
0,911
1,012
0,541
0,638
0,560
0,684
0,968
0,728
1,029
0,516
0,632
0,509
0,560
0,560
0,560
0,668
ODT
2,790
2,954
3,277
3,910
4,531
5,746
9,263
11,476
13,731
16,657
15,717
19,191
18,641
21,728
22,295
24,417
25,020
29,696
29,928
6,743
8,505
10,450
13,034
33,361
C
0,314
0,325
0,346
0,385
0,419
0,481
0,629
0,709
0,782
0,869
0,408
0,482
0,481
0,516
0,800
0,550
0,851
0,316
0,432
0,421
0,481
0,481
0,481
0,457
D
0,06
0,06
0,06
0,06
0,06
0,06
0,12
0,12
0,12
0,12
0,12
0,12
0,06
0,12
0,12
0,12
0,12
0,06
0,06
0,06
0,06
0,06
0,06
0,06
E
0,22
0,22
0,23
0,27
0,30
0,33
0,44
0,50
0,56
0,62
0,56
0,67
0,33
0,72
0,72
0,75
0,75
0,84
0,84
0,38
0,33
0,33
0,33
0,89
G
2,893
30,62
3,395
4,046
4,685
5,930
9,521
11,774
14,064
17,033
16,063
19,604
18,832
22,185
22,752
24,904
25,507
30,249
30,481
6,955
8,696
10,641
13,225
33,949
N
0,450
0,466
0,498
0,554
0,606
0,698
0,921
1,039
1,149
1,279
0,786
0,930
0,705
1,006
1,290
1,071
1,373
0,902
1,018
0,666
0,705
0,705
0,705
1,078

Seals
O-rings set - imperial
O-rings set - metric
UOB
code
TI-UOB-KIT
d
2,90
3,68
4,48
5,28
6,07
7,66
9,19
9,25
10,78
12,37
13,95
15,54
17,13
18,64
18,72
20,22
21,82
23,40
24,99
28,17
29,75
31,34
32,92
34,52
36,10
36,58
37,47
37,69
40,65
43,82
dimensions
[mm]
number
[pc]
s
1,78
1,78
1,78
1,78
1,78
1,78
2,62
1,78
2,62
2,62
2,62
2,62
2,62
3,53
2,62
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
3,53
5,33
3,53
5,33
5,33
20
20
20
20
20
20
13
20
13
13
13
10
13
13
13
10
10
10
10
10
10
10
10
10
10
10
7
10
7
7
UOM
code
TI-UOM-KIT
d
3
4
5
6
7
8
10
10
11
12
14
16
17
19
19
20
22
24
25
27
28
30
32
33
35
36
38
38
42
45
dimensions
[mm]
UDB
size
[inch]
TI-UDB-02
TI-UDB-04
TI-UDB-06
TI-UDB-08
TI-UDB-10
TI-UDB-12
TI-UDB-16
TI-UDB-20
TI-UDB-24
TI-UDB-32
1/8
1/4
3/8
1/2
5/8
3/4
1
1.1/4
1.1/2
2
18
18
18
18
17
17
17
14
14
14
14
14
14
14
12
12
12
12
12
12
12
12
12
12
12
12
12
9
9
9
DOWTY seal - metric
DOWTY seal - imperial
code
number
[pc]
s
2
2
2
2
2
2
2
2,5
2,5
2,5
2,5
2,5
2,5
2,5
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
d
10,2
13,7
17,2
21,5
23,5
27
33,9
42,9
48,41
60,58
dimensions
[mm]
D
17,02
20,65
23,88
28,65
31,8
35
42,88
52,45
58,67
73,1
s
1,65
2,03
2,03
2,34
2,34
2,34
3,25
3,25
3,25
3,25
UDM
code
size
[mm]
TI-UDM-12
TI-UDM-14
TI-UDM-16
TI-UDM-18
TI-UDM-20
TI-UDM-22
TI-UDM-24
TI-UDM-26
12
14
16
18
20
22
24
26
d
12,7
14,7
16,7
18,7
20,7
22,7
24,7
26,7
dimensions
[mm]
D
19
21
23
26
29
31
33
35
s
1,5
1,5
1,5
1,5
2
2
2
2
1135

Seals
Copper seal
Flat PTFE seal
UBW140
UM
code
TI-UM-06/10
TI-UM-08/12
TI-UM-08/14
TI-UM-10/14
TI-UM-10/16
TI-UM-12/15
TI-UM-12/18
TI-UM-13/19
TI-UM-14/20
TI-UM-16/22
TI-UM-17/21
TI-UM-18/24
TI-UM-20/26
TI-UM-21/26
TI-UM-22/27
TI-UM-24/30
TI-UM-26/33
TI-UM-27/33
TI-UM-30/36
TI-UM-33/40
TI-UM-42/49
TI-UM-48/59
1136
dimensions
size
[mm] [inch]
6
8
8
10
1/8
10
1/8
12
12
13
1/4
14
16
17
3/8
18
20
21
1/2
22
24
5/8
26
27
3/4
30
33
1
42 1.1/4
48 1.1/2
d
6
8
8
10
10
12
12
13
14
16
17
18
20
21
22
24
26
27
30
33
42
48
[mm]
D
10
12
14
14
16
15
18
19
20
22
21
24
26
26
27
30
33
33
36
40
49
59
s
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
1,5
code
size
[inch]
TI-UBW140-04T
TI-UBW140-06T
TI-UBW140-08T
TI-UBW140-12T
TI-UBW140-16T
TI-UBW140-20T
TI-UBW140-24T
1/4
3/8
1/2
3/4
1
1.1/4
1.1/2
dimensions
d
6
7
10
12
20
28
34
[mm]
D
11,3
15
19
24
30
38
44,5
s
2
2
2
2
2
2
2
Tool set for O-ring
EC-100740

Sealants
code
width x
thickness
[mm]
compression
100 kG/mm2
[mm]
UG-FLANGIFLON-03x1,5
3 x 1,5
3,5 x 0,5
5x2
6 x 0,7
UG-FLANGIFLON-07x2,5
7 x 2,5
8 x 1,1
UG-FLANGIFLON-10x3
10 x 3
11,5 x 1,3
UG-FLANGIFLON-12x4
12 x 4
13,2 x 1,4
UG-FLANGIFLON-14x5
14 x 5
15 x 1,5
UG-FLANGIFLON-17x6
17 x 6
19,5 x 2
UG-FLANGIFLON-20x7
20 x 7
23 x 2,6
code
width x
thickness
[mm]
standard
length
[m]
description
UG-TAPE-12
12 x 0,076
12
PTFE tape designed to seal

thread connections.
+260C.
UG-FLANGIFLON-05x2
description
FLANGIFLON PTFE expanded

tape designed to seal flat surfaces (e.g. flange connections).
Pressure: to 250 bar
(depends on the temperature).
Working temp.: from -240C to
+260C.
Medium: pH 014.
code
single coil efficiency

(number of fittings)
description
LT-55
1/2 - 385
3/4 - 260
1 - 180
PTFE coated string sealant

for pipe connection sealing.
For direct application from
the container with built-in cutting blade ensuring fast and
clean assembly.
volume
[ml]
description
LT-542-50
50
Anaerobic sealant for threaded connections

up to 2 exposed to vibration in particular.
Certified for use with natural gases. Not recommended for use with oxygen.
Break loose torque: 15 35 Nm.
code
volume
[ml]
description
50
Anaerobic sealant for threaded elements up

to 3. Certified for use with natural gases.
Not recommended for use with oxygen.
Break loose torque: 9 25 Nm
code
LT-577-50
1137

Sealants
code
volume
[ml]
WE-AN30-542-P-020
20
WE-AN30-542-P-050
50
code
volume
[ml]
description
WE-AN30-577-T-050
50
Anaerobic sealant for threaded elements.

Used in hydraulic and pneumatic systems.
High viscosity, medium durability.
Disassembly possible, maximum clearance
of 0.50 mm, meets the requirements of BAM
certificate can be used in installations exposed to oxygen (max. working temperature
+60C, max. working pressure of oxygen 10
bar).
T - type tube container.
code
volume
[ml]
description
WE-AN30-280-P-020
20
WE-AN30-280-P-050
50
code
volume
[ml]
description
175
Sealing thread made entirely of PTFE. Permanent and safe sealing for most threaded
metal and plastic pipe connections. Nonflammable, superior chemical and temperature resistance from -200C up to +240C.
WE-DF-17-175
1138
description
Anaerobic sealant for threaded elements.
Used in hydraulic and pneumatic systems.
Medium viscosity and durability. Disassembly possible, maximum clearance of 0,15
mm.
P - type pen container.
Anaerobic sealant for threaded elements

used in passive materials without activating
agent. Increased viscosity, high durability.
Disassembly very difficult, maximum clearance of 0.20 mm.
P - type pen container.

Threadlockers
code
volume
[ml]
WE-AN30-260-P-020
20
WE-AN30-260-P-050
50
code
package
capacity
WE-VA100-P-003
3g
WE-VA100-T-012
12 g
WE-VA-AS
150 ml
Activating agent for porous surfaces as well

as for hardening acceleration of WE-VA
glues.
code
volume
[ml]
description
WE-ZSN-400
400
Zinc anticorrosive coating, 70% of zinc in dry

coating (99% pure), thermal resistance up to
+500C.
WE-A-100
400
Aluminium pigments of >99.5% purity, thermal resistance up to +800C, abrasion resistant.
WE-A-400
400
Aluminium pigments of >99.5% purity, thermal resistance up to +800C, abrasion resistant, high gloss.
code
volume
[ml]
description
400
High quality maintenance and preservation spray used in industry and workshop
applications. W44T loosens seized screw
connections, dispels moisture, eliminates
squeaking and creaking, cleans dirty metal
surfaces, protects and cares for all tools and
machines.
500
Degreaser for surface preparation. Cleans

and degreases metals, glass, ceramics,
wood. Removes old solid grease. Evaporates quickly leaving no spots on the surface.
description
Thread-locking fluid - for use in passive materials without activating agent, medium viscosity, high durability - difficult disassembly.
P - type pen container
Cyanoacrylic glues
description
Medium viscosity, fast hardening, general
purpose glue for plastics, rubber and metals
in different combinations of the three.
P - type pen container, T - tube.
Metal sprays
Cleaning sprays
WE-W44T-400
WE-CLEANER-S-0500
1139

Assembly pastes and sprays
code
package
capacity
WE-ASW-0030
(container)
30 g
WE-ASW-0120
(container)
120 g
WE-ASW-400
(spray)
400 ml
code
volume
[ml]
description
500
High purity medical-grade grease free of

resins and acids. Developed especially for
cleaning and care of clean metal surfaces in
food, pharmaceutical and cosmetic industry.
Holds NSF H1 certificate.
400
Odourless and tasteless high-temperature

grease used in food industry. For ball and
sliding bearing, shafts, gearings. NLGI
Class 1; white yellowish colour, temperature
resistant from -40C up to +160C. Holds
NSF H1 certificate for direct contact with
food.
WE-USGMO-400
400
General purpose spray with MoS2. Highly

adhesive and resistant to high pressures
grease with MoS2 as an additive. Ensures
smooth operation of machine subassemblies and protects against corrosion.
code
volume
[ml]
description
WE-LDS-400
400
For fast and reliable location of leaks and

cracks on connections as well as gas installations and air-compressed systems. Does
not cause corrosion, non-flammable and
soft to the skin. Tested according to DINDVGW standard.
code
volume
[ml]
description
description
Anti-Seize High Tech assembly pastes ensure protection against corrosion, seizure,
cold welding, especially on stainless steel
surfaces. Exhibit perfect slipping properties,
resistance to salty water, acids and bases,
thermal resistance up to +1400C, high
pressure resistance (to 230N/mm2). Eliminate squeaking and creaking, possess good
sealing properties, allow for easy assembly
and disassembly of components. Economical use (1 kg per ca. 40 50m2), free from
toxic metals, NLGI - class 1.
Adhesive spray greases
WE-BFS-500
WE-AL-H-400
Leak detection sprays
Assembly silicone
WE-BS-085
85
Special silicone resistant to oils and high

temperatures up to +300C.
Tube type container.
1140

Protective products
code
package
capacity
WE-PR88-100
100 g
WE-PR88-100
1000 g
description
Hand protective cream - traditional means of

skin protection at work when in contact with
oily and greasy dirt as well as with strongly
adhesive dirt. Protects the skin against oils,
fat, lacquers, graphite, carbon black, tar,
resin, polyester, silicone, and mineral fibre.
Maintenance products
code
volume
[ml]
AZ-PENETRATOR
500
code
volume
[ml]
AZ-CLEANER
500
code
volume
[ml]
description
- Excellent lubricant for precision instruments.
- Penetration, lubrication, dehumidification,
protection
against corrosion.
- Removes moisture and dries out electronic
devices.
- Enables unscrewing rusted screws, nuts, etc.
- For surface maintenance and corrosion
prevention.
- Removes impurities from metal parts.
- Does not contain silicones.
description
- Removes fats, tar, oils, grease, dirt, adhesive
remainders.
- Does not contain solvents.
- Does not cause corrosion.
Silicone lubricant
AZ-SILIKON
500
description
- Permanent.
- Does not contain petroleum oils.
- Resistant to elevated temperature
(up to +176C).
- Protects components.
- Does not stain.
1141
TECHNICAL INFORMATION
Table of hose material chemical resistance
The table below serves for initial hose material and sealing selection for a particular application.
For the appropriate and final choice contact Sales or Technical Department of TUBES INTERNATIONAL.
EPDM
EPM
NR
NBR
CR
SBR
FPM
XLPE
PTFE
PVC
PU
PA
A
B
C
X
-
- ethylene propylene diene rubber

- ethylene propylene rubber
- natural rubber
- nitrile butadiene rubber
- chloroprene rubber (neoprene)
- styrene butadiene rubber
- fluorine rubber (Viton)
- cross-linked polyethylene
- Teflon
- polyvinyl chloride
- polyurethane
- polyamide (nylon)
- excellent resistance, suitable for continuous operation,

- good resistance, intermittent operation,
- limited resistance, limited use,
- no resistance,
- no data.
The data given in the tables below apply to resistance at the temperature of +20C.
SUBSTANCE
EPDM EPM
NR
NBR
CR
SBR
FPM XLPE PTFE PVC
PU
PA
Acetic acid - glacial
Acetic acid 30%
C
B
Acetic aldehyde (50%)
C/X
C/X
Acetic anhydride
Acetone
B/C
A/B
Acetyl chloride
Acetylene
B/C
A/B
A
-
Adipic acid
Aluminium acetate
Aluminium chloride
Aluminium fluoride
Aluminium nitrate
Aluminium sulphate
Ammonium carbonate
Ammonium chloride
Ammonium hydroxide
Ammonium nitrate
Ammonium nitrite
Ammonium phosphate
Ammonium sulphate
Amyl acetate
Amyl alcohol
1142
SUBSTANCE
EPDM EPM
Anhydrous ammonia
NR
NBR
CR
SBR
FPM XLPE PTFE PVC
PU
PA
contact Sales or Technical Department for proper hose selection
Anhydrous bromine
Aniline
Aniline dyes
Aniline hydrochloride
Animal fats
Aqua regia
Arachis oil
Argon
Arsenic acid
Arsenic trichloride
Asphalt
Barium chloride
Barium sulphate
Barium sulphide
Beer
Benzene
A/B
Benzoic acid
Benzyl alcohol
Benzyl benzoate
Benzyl chloride
Bituminous tar
Bordeaux mixture
Boric acid
Bromine trifluoride
Bromine water
Bromotoluene
Bunker oil
Butadiene
Butane
Butter
Butyl (III) alcohol
Butyl acetate
A/B
Butyl benzoate
Butyl Cellosolve
Butyl stearate
Butyl alcohol (butanol)
Butylamine
Butyric aldehyde
Calcium acetate
Calcium chloride
Calcium hydroxide
Calcium hypochlorite
Calcium nitrate
A
-
Calcium sulphide
Carbitol
Carbon dioxide
1143
SUBSTANCE
EPDM EPM
NR
NBR
CR
SBR
FPM XLPE PTFE PVC
PU
PA
Carbon disulfide
Carbon monoxide
Carbon tetrachloride
Carbonic acid
Cellosolw
Chinese wood oil
Chlorine (dry)
Chlorine (wet)
Chlorine dioxide
Chloroacetic acid
Chloroacetone
Chlorobenzene
Chlorobutadiene
Chloroform
Chlorotoluene
Chromic acid
Chromium solutions for galvanizing
Citric acid
Cobalt
Coconut oil
Coke-oven gas
Copper chloride
Copper cyanide
Cotton-seed oil
Creosote (coal tar)
Cresol
Cresylic acid
Crude oil
Cumene (isopropylbenzene)
Cupric acetate
Cupric sulphate
Cuprous potassium cyanide
Cyclohexane
Cyclohexanol
Cyclohexanone
Dekalin
Denatured alcohol
Diacetone
Diacetone alcohol
C/X
Dibenzyl ether
Dibuthyl ether
Dibutyl phthalate
Dibutyl sebacate
Dibutylamine
Dichlorobenzene
Dichloroethylene
Dichloroisopropyl ether
1144
SUBSTANCE
EPDM EPM
NR
NBR
CR
SBR
FPM XLPE PTFE PVC
PU
PA
Diesel oil
Diethyl sebacate
Diethylamine
Diethylaminobenzene
Diethylene glycol
Diisobutylene
Diisopropyl ketone
Diisopropylbenzene
Dimethyl phthalate
Dimethylformamide
Dinitrotoluene
Dioctyl phthalate
Dioctyl sebacate
Dipentene
Diphenyl (phenylbenzene)
Dowtherm, dautherm
Dry cleaning fluids
Ethane
Ethanoloamine
Ethyl acetate
Ethyl acetoacetate
Ethyl alcohol (ethanol)
Ethyl benzoate
Ethyl cellosolve acetate
Ethyl cellulose
Ethyl chloride
Ethyl ether (ether)
Ethyl formate
Ethyl silicate
Ethylbenzene
Ethylene
Ethylene chloride
Ethylene chlorohydrin
Ethylene glycol
Ethylenediamine
Fatty acids
Ferric chloride
Ferric nitrate
Ferric sulphate
Fish liver oil
Fluoric grease
Fluorobenzene
Fluoroboric acid
Formaldehyde (methyl aldehyde)
A
X
Formic acid
Freon 114
Freon 12
1145
SUBSTANCE
EPDM EPM
NR
NBR
CR
SBR
FPM XLPE PTFE PVC
PU
PA
Freon 13 - (chlorotrifluoromethane)
Freon 21 - (dichlorofluoromethane)
Freon 22 - (chlorodifluoromethane)
Furfural
Gallic acid
Gaseous ammonia (cold)
Gaseous ammonia (hot)
Gelatine
Glucose
Glycerine
Green liquor
Helium
Hexafluorosilicic acid
Hexane
Hydraulic oil (petroleum)
Hydrobromic acid
Hydrochloric acid (cold) 37%
Hydrochloric acid (hot) 37%
Hydrocyanic acid
Hydrofluoric acid (concentrated) cold
Hydrofluoric acid (concentrated) hot
Hydrogen (gas)
Iodine
Isobutyl alcohol (izobutanol)
Isooctane
Isopropyl acetate
Isopropyl alcohol (izopropanol)
Isopropyl chloride
Isopropyl ether
Lactic acid (cold)
Lactic acid (hot)
Lard
Lavender oil
Lead acetate
Lead nitrate
Lead sulphamate
Linseed oil
Lubricating oils
Lye (soda lye)
Magnesium chloride
Magnesium hydroxide
Magnesium sulphate
Maize oil
Liquified Natural Gas (LNG)
Maleic acid
Maleic anhydride
Malic acid
1146
SUBSTANCE
EPDM EPM
NR
NBR
CR
SBR
FPM XLPE PTFE PVC
PU
PA
Medicinal train oil
Mercury
Mesityl oxide
Methane
Methyl acetate
Methyl alcohol (metanol)
Methyl bromide
A
-
Methyl butyl ketone
Methyl Cellosolve
Methyl chloride
Methyl ethyl ether
Methyl ethyl ketone (MEK)
Methyl isobutyl ketone
Milk
Mineral oil
Monoethanolamine
Naphtha
Naphtha (refined)
Naphthalene
Naphthenic acid
Natural gas
Nickel acetate
Nickel chloride
Nickel sulphate
Nitric acid (concentrated)
Nitric acid (diluted)
Nitrobenzene
Nitroethane
Nitrogen
Nitromethane
Nonhydrocarbon detergent solution
Octachlorotoluene
Octyl alcohol
Oleate methyl
Oleic acid
Olive oil
Ortho-dichlorobenzene
Oxalic acid
Oxygen (cold)
Ozone
Palmitic acid
Para-isopropyltoluene
Pentachloroethylbenzene
Perchloric acid
Perchloroethylene
Petrol
Phenol (carbolic acid)
1147
SUBSTANCE
EPDM EPM
NR
NBR
CR
SBR
FPM XLPE PTFE PVC
PU
PA
Phenylbenzene
Phenylhydrazine
Phorone (diisopropylidene acetone)
Phosphoric acid 20%
Phosphoric acid 80%
Phosphorus trichloride
Picric acid
Pine oil
Polyvinyl acetate (emulsion)
Potassium acetate
Potassium chloride
Potassium cyanide
Potassium dichromate
Potassium hydroxide
Potassium nitrate
Potassium sulphate
Propane
Propyl acetate
Propyl alcohol (propanol)
Propyl nitrate
Propylene
Propylene glycol
A/B
A/B
Pyridine
Ricinus oil
Sal ammoniac (ammonium chloride)
Salicylic acid
Salt water
Silicon oils
Silicone grease
Silver nitrite
Skydrol 500
Skydrol 7000
Soap solutions
Soda, raw sodium carbonate
Sodium acetate
Sodium bicarbonate
Sodium bisulphite
Sodium borate
Sodium chloride (brine)
Sodium chloride (brine)
Sodium cyanide
Sodium hydroxide
Sodium hypochlorite (15%)
B/C
Sodium metaphosphate
Sodium nitrate
Sodium perborate
Sodium peroxide
1148
SUBSTANCE
EPDM EPM
NR
NBR
CR
SBR
FPM XLPE PTFE PVC
PU
PA
Sodium phosphate
Sodium silicate
Sodium sulphate
Sodium thiosulphate
Soybean oil
Stannic chloride
Steam
Stearic acid
Styrene
Sugar solution
Sulphur
Sulphur chloride
Sulphur dioxide
Sulphur trioxide
Sulphuric acid fuming (oleum)
Sulphuric acid 10 75%
Sulphuric acid 10%
Sulphuric acid 96%
A/B
A/B
Sulphurous acid
Tannic acid (tannin)
Tartaric acid
Terpentine
Terpineol
Tetrachloroethylene
Tetraethyl lead
Toluene
A/B
Transformer oil
Transmission fluid A
Trichloroacetic acid
Trichloroethane
Trichloroethylene
Tricresyl phosphate
Triethanolamine
Trinitrotoluene
Vegetable oils
Vinegar
Vinyl chloride
Vinylacetylene
Waste water
Water
Whisky, wines
White mineral oil
Xylene
Zinc chloride
Zinc sulphate
Turbine oil
1149
Table of fitting material chemical resistance
The table below serves for initial fitting material selection for a particular application.
For appropriate and final choice contact Sales or Technical Department of TUBES INTERNATIONAL.
symbol
AL
characteristics
aluminium
light, limited corrosion resistance, not suitable for acids and high pressure
MS
brass
heavy, limited corrosion resistance, not suitable for acids
BR
bronze
heavy, limited corrosion resistance, not suitable for acids
ST
carbon steel
high tensile strength, not expensive, limited corrosion resistance
monel
high corrosion resistance, very expensive, suitable for acids
304
steel AISI 304
corrosion resistance, not suitable for acids
316L
steel AISI 316L
corrosion resistance, limited resistance to acids
PP
polypropylene
light, for low pressure, corrosion resistance, suitable for acids, not advisable for food products
MON
A
B
C
X
-
material
- excellent resistance, suitable for continuous operation

- good resistance, intermitted work
- limited resistance, limited use
- no resistance
- no data
The data given in the tables below apply to resistance at the temperature of +20C.
SUBSTANCE
AL
MS
BR
ST
MON
304
316L
PP
Acetate (pure solution)
Acetate (raw solution)
Acetic acid (10%)
Acetic acid (20%)
Acetic acid (50%)
Acetic acid (80%)
Acetic anhydride
Acetone
Acetylene
Aluminium chloride (solution)
Aluminium fluoride (saturated)
Aluminium nitrate (saturated)
Aluminium potassium sulphate
Aluminium sulphate (saturated)
Ammonium carbonate (saturated)
Ammonium casein
Ammonium chloride (dry)
Ammonium hydrogen difluoride
Ammonium hydroxide
Ammonium nitrate
Ammonium phosphate (10 40%)
Ammonium sulphate (10 40%)
Anhydrous ammonia (dry)
Anhydrous ammonia (wet)
Aniline (aminobenzene)
Arsenic acid
1150
SUBSTANCE
AL
MS
BR
ST
MON
304
316L
PP
Asphalt
Barium carbonate (saturated)
Barium chloride (saturated)
Barium hydroxide (saturated)
Barium sulphate
Barium sulphide
Benzaldehyde
Benzene
Benzene, benzol
Benzoic acid
Benzyl alcohol
Borax
A
A
Boric acid
Brass plating liquid
Brine (acid)
Bromic acid
Butadiene, butylene
Butane
Butene
Butyl acetate (dry)
Butyl alcohol
Butyric acid
Cadmium cyanate
Cadmium plating liquid
Calcium acetate
Calcium carbonate
Calcium chloride (saturated)
Calcium disulphide
Calcium hydroxide (saturated)
A
A
Calcium hypochlorite (saturated)
Calcium sulphate
Calcium sulphide
Carbon bisulphite
Carbon dioxide (dry)
Carbon dioxide (wet)
Carbon disulphide
Carbon monoxide
Carbon tetrachloride
Carbonic acid
Caustic potash (KOH)
Caustic soda (NaOH)
Chlorine (aqueous solution)
Chlorine (dry)
Chlorobromomethane
X
X
Chloroform (dry)
Chlorosulphonic acid
Chromic acid (50%)
1151
SUBSTANCE
AL
MS
BR
ST
MON
304
316L
PP
Chypochlorite acid 20%
Citric acid
Clorox (whitener, 5.5% Cl2)
Copper plating liquid (cyanic)
Cupric chloride (dry)
Cupric cyanide
Cupric sulphate
A
X
Cyclohexane
Detergents
Dextrose
Diacetone alcohol
Diethyl sebacate
Diethylamine
Disodium phosphate
Ethanolamine
Ethers
Ethyl acetate
Ethyl alcohol
Ethyl chloride (dry)
Ethyl dichloride (dry)
Ethylene dichloride
Ethylene glycol
Ethylene oxide
Ethylene perchlorate
X
X
Ethylene tetrachloride
Extraction naphtha
Ferric chloride
Ferric hydroxide
Ferric nitrate (10 50%)
A
A
Ferric sulphate
Ferrous chloride
Ferrous sulphate
Fluoroboric acid
Formaldehyde (50%)
Formalin
Formic acid (anhydrous)
Gaseous ammonia
Gelatine
Glucose
Glycerine
Glycol ethers
Glycols
Heptane
Hexane
Hexyl alcohol
Hydrobromic acid (20%)
Hydrobromic acid (50%)
1152
SUBSTANCE
AL
MS
BR
ST
MON
304
316L
PP
Hydrochloric acid (20%)
Hydrochloric acid (38%)
Hydrocyanic acid
Hydrogen (gas)
Hydrogen chloride (gas)
Hydrogen peroxide 50%
Hydrogen sulphide (wet)
Iodine
Isobutyl acetate
Isobutyl alcohol
Isopropyl acetate
Isopropyl alcohol
Isopropyl ether
Ketones
Lactic acid (25%)
Lactic acid (80%)
Lead acetate
Lead chloride
Lead plating liquid
Lead sulphate
Lime sulphur
Linoleic acid
Liquid bromine
Lubricant (liquid)
Magnesium carbonate
Magnesium chloride
Magnesium hydroxide
Magnesium nitrate
Magnesium oxide
Magnesium sulphate
Maleic acid
Mercuric chloride
Mercuric cyanide
Mercury
Methane
Methyl alcohol - methanol
Methyl bromide
Methyl ethyl ketone
Methyl isobutyl ketone
Methyl methacrylate
Methylene chloride
Methylobenzene (toluene)
Metylo-amyloacetal
Microcrystal paraffin
Milk
Mine water
Naphtha
1153
SUBSTANCE
AL
MS
BR
ST
MON
304
316L
PP
Naphtha
Naphthalene
X
X
Naphthenic acid
Nickel plating liquid
Nickel sulphate
Nitric acid (100%)
Nitric acid (30%)
Nitric acid (50%)
Nitrobenzene
Nitrogen
Octyl alcohol
Oil (diesel)
Oil (gear)
Oil (heating)
Oil (hydraulic)
Oil (mineral)
Oil (raw)
Oil (refined)
Oil (ricinus)
Oil (silicone)
Oil (vegetable)
Oleic acid
Oxalic acid (saturated)
Oxygen
Palmitic acid (saturated)
Paraffin
Pentachlorophenol (dry)
Pentanol (amyl alcohol)
Phenol
Phosphoric acid (25 50%)
Phosphoric acid (50 85%)
Photographic solutions
Picric acid
Potassium acetate
Potassium bicarbonate (30%)
Potassium carbonate (50%)
Potassium chlorate (30%)
Potassium chloride (30%)
Potassium chromate (30%)
Potassium cyanide - solution (30%)
Potassium dichromate (30%)
Potassium hydroxide (30%)
Potassium hydroxide (90%)
Potassium nitrate (80%)
Potassium permanganate (20%)
Potassium sulphate (10%)
Propane
1154
SUBSTANCE
AL
MS
BR
ST
MON
304
316L
PP
Propyl alcohol
Propylene glycol
Propylene oxide (90%)
Pyridine
Pyrogallol C6H3(OH)3
Sea water
Silicohydrofluoric acid (10 50%)
Silicone fluid
Silver nitrate
Silver plating liquid
Soap solutions
Sodium acetate
Sodium bicarbonate (20%)
Sodium bisulphate
Sodium bisulphite
Sodium borate
Sodium carbonate
Sodium chlorate (50%)
Sodium chloride (30%)
Sodium cyanide (10%)
Sodium dichromate (10%)
Sodium hydroxide (30%)
Sodium hypochlorite (20%)
Sodium metaphosphate
Sodium nitrate (40%)
Sodium perborate (10%)
Sodium peroxide (10%)
A
A
Sodium phosphate
Sodium silicate
Sodium sulphate
Sodium sulphide (50%)
Sodium thiosulphate
Stannic chloride
Stannous chloride (15%)
Steam
Stearic acid
Styrene
Sulphur chloride
Sulphur dioxide (dry)
Sulphur trioxide
Sulphuric acid (10%)
Sulphuric acid (98%)
Sulphurous acid
Tannic acid tannin
Tartaric acid
1155
SUBSTANCE
AL
MS
BR
ST
MON
304
316L
PP
Tetrahydrofuran
Tin plating liquid
Titanium tetrachloride
Toluene
Trichloroethylene
Triethanolamine
Triethylamine
Trisodium phosphate (10%)
Turbojet fuel (JP4, JP5)
Turpentine
Urea (50%)
Vinegar
Water (distilled)
Whitener (12.5% of active chlorine)
Xylene
Zinc chloride
Zinc nitrate
Zinc sulphate (50%)
1156
Stainless steel equivalents
USA
Poland
UK
France
Sweden
Russia
UE
AISI
W. Nr
Germany
DIN
PN
BS
NF
SS
GOST
EN
301
302
1.4310
1.4319
X 12 CrNi 17-7
X 5 CrNi 18-7
1H18N9
301 S21
302 S25
Z 12 CN 17-07
Z 10 CN 18-09
2331
12KH18N9
X 12 CrNi 17-7
X 10 CrNi 18-9
X 10 CrNiS 18-9
303 S31
303 S41
Z8 CNF 18-09
Z10 CNF 18-09
2346
12KH18N10E
X 10 CrNi 18-9
303
1.4305
303Se
304
1.4301
1.4303
X 5 CrNi 18-10
X 5 CrNi 18-12
0H18N9
304 S15
304 S16
Z 6 CN 18-09
2332
08KH18N10
06KH18N11
X 5 CrNi 18-10
X 6 CrNi 18-10
304L
1.4306
X 2 CrNi 18-11
00H18N10
304 S11
Z 2 CN 18-10
2352
03KH18N11
X 2 CrNi 19-11
X 3 CrNi 18-10
309
1.4828
X 15 CrNiS 20-12
309 S24
Z 15 CN 23-13
X 15 CrNi 23-13
310
310S
1.4845
1.4842
X 12 CrNi 25-21
X 12 CrNi 25-20
310 S24
Z 12 CN 25-20
2361
10KH23N18
20KH25N20S2
X 6 CrNi 25-20
316
1.4401
1.4436
X 5 CrNiMo 17-12-2
0H17N12M2T
X 5 CrNiMo 17-13-3
316 S16
316 S31
316 S33
Z 6 CND 17-11
Z 6 CND 17-12
2347
2343
X 6 CrNiMo 17-12-2
X 6 CrNiMo 17-13-3
316L
1.4404
1.4435
X 2 CrNiMo 17-13-2
X 2 CrNiMo 18-14-3
316 S12
Z 2 CND 17-12
Z 2 CND 17-13
2348
2353
03KH17N14M2
03KH16N15M3
X 3 CrNiMo 17-12-2
X 3 CrNiMo 17-13-3
316Ti
1.4571 X 6 CrNiMoTi 17-12-2

H17N13M2T
1.4573 X 10 CrNiMoTi 18-12
Z 6 CNDT 17-12
2350
08KH17N13M2T
10KH17N13M2T
X 6 CrNiMoTi 17-12-2
X 6 CrNiMoTi 17-13-3
Z 2 CND 19 -15
2367
X 3 CrNiMo 18-16-4
Z 6 CNT 18-10
2367
12KH18N10T
X 6 CrNiTi 18-10
2337
Z 6 CNNb 18-10
2324
08KH18N12B
X 6 CrNiNb 18-10
Z 6 CT 12
Z 10 C 13
Z 12 C 13
Z 6 C 13
2338
X 5 CrTi 12
2302
2301
08KH13
X 12 Cr 13
X 6 Cr 13
00H17N14M2
317L
1.4438
X 2 CrNiMo 18-16-4
320 S17
320 S31
320 S33
317 S12
321
1.4541
1.4878
X 6 CrNiTi 18-10
X 12 CrNiTi 18-9
1H18N10T
1H18N9T
321 S12
321 S31
329
1.4460
X 8 CrNiMo 27-5
347
1.4550
X 6 CrNiNb 18-10
0H18N12Nb
347 S17
347 S31
409
403
410
410S
1.4512
1.4000
1.4006
1.4024
X 6 CrTi 12
X 6 Cr 13
X 10 Cr 13
X 15 Cr 13
409 S19
0H13
1H13
403 S17
410 S21
Stainless steel - basic grade characteristics

Notions such as stainless steel or acid resistant steel are conventional. Each grade has a top corrosion resistance
level defined for the specific working conditions which depend on e.g. temperature.
type
characteristics
AISI 304
Very popular general purpose stainless steel. Used in food industry for parts that are not in contact with food.
AISI 316
Acid resistant steel widely used in chemical, pharmaceutical and food industry with improved corrosion resistance (in comparison to steel AISI 304).
AISI 316L
Acid resistant steel with reduced carbon content for increased intercrystalline corrosion resistance. Used
especially for welding connections.
1157
Conversion table for pressure units
PSI
MPa
kG/cm2
bar
atm
PSI
MPa
kG/cm2
bar
atm
25
50
75
100
200
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2100
2200
2300
2400
2500
2600
2700
2800
2900
3000
3100
3200
3300
3400
3500
3600
3700
3800
3900
4000
4100
4200
4300
4400
4500
4600
4700
4800
4900
5000
5100
0,17
0,34
0,52
0,69
1,32
2,07
2,76
3,45
4,14
4,83
5,52
6,20
6,90
7,58
8,27
8,96
9,65
10,34
11,03
11,72
12,41
13,10
13,79
14,48
15,17
15,86
16,55
17,24
17,93
18,62
19,30
19,99
20,68
21,37
22,06
22,75
23,44
24,13
24,82
25,51
26,20
26,89
27,58
28,27
28,96
29,65
30,34
31,03
31,72
32,41
33,10
33,78
34,47
35,16
1,76
3,52
5,27
7,03
14,06
21,09
28,12
35,15
42,18
49,21
56,24
63,28
70,31
77,34
84,37
91,40
98,43
105,46
112,49
119,52
126,55
133,58
140,61
147,64
154,68
161,71
168,74
175,77
182,80
189,83
196,86
203,89
210,92
217,95
224,98
232,01
239,04
246,07
253,10
260,14
267,17
274,20
281,23
288,26
295,29
302,32
309,35
316,38
323,41
330,44
337,47
344,50
351,54
358,57
1,72
3,45
5,18
6,90
13,80
20,70
27,60
34,50
41,40
48,30
55,20
62,10
69,00
75,90
82,80
89,70
96,60
103,50
110,40
117,30
124,20
131,10
138,00
144,90
151,80
158,70
165,60
172,50
179,40
186,30
193,20
200,10
207,00
213,90
220,80
227,70
234,60
241,50
248,40
255,30
262,20
269,10
276,00
282,90
289,80
296,70
303,60
310,50
317,40
324,30
331,20
338,10
345,00
351,90
1,70
3,40
5,10
6,80
13,60
20,40
27,20
34,00
40,80
47,60
54,40
61,20
68,00
74,80
81,60
88,40
95,20
102,00
108,80
115,60
122,40
129,20
136,00
142,80
149,60
156,40
163,20
170,00
176,80
183,60
190,40
197,20
204,00
210,80
217,60
224,40
231,20
238,00
244,80
251,60
258,40
265,20
272,00
278,80
285,60
292,40
299,20
306,00
312,80
319,60
326,40
333,20
340,00
346,80
5200
5300
5400
5500
5600
5700
5800
5900
6000
6100
6200
6300
6400
6500
6600
6700
6800
6900
7000
7100
7200
7300
7400
7500
7600
7700
7800
7900
8000
8100
8200
8300
8400
8500
8600
8700
8800
8900
9000
9100
9200
9300
9400
9500
9600
9700
9800
9900
10000
11000
12000
13000
14000
15000
35,85
36,54
37,23
37,92
38,61
39,30
39,99
40,68
41,37
42,06
42,75
43,44
44,13
44,82
45,51
46,20
46,88
47,57
48,26
48,95
49,64
50,33
51,02
51,71
52,40
53,09
53,78
54,47
55,16
55,85
56,54
57,23
57,92
58,61
59,30
59,98
60,67
61,36
62,05
32,74
63,43
64,12
64,81
65,50
66,19
66,88
67,57
68,26
68,95
75,84
82,74
89,63
96,53
103,42
365,60
372,63
379,66
386,69
393,72
400,75
407,78
414,81
421,84
428,87
435,90
442,93
449,96
457,00
464,03
471,06
478,09
485,12
492,15
499,18
506,21
513,24
520,27
527,30
534,33
541,36
548,39
555,42
562,46
569,49
576,52
583,55
590,58
597,61
604,64
611,67
618,70
625,73
632,76
639,79
646,82
653,86
660,89
667,92
674,95
681,98
689,01
696,04
703,07
773,38
843,68
913,99
984,30
1054,60
358,80
365,70
372,60
379,50
386,40
393,30
400,20
407,10
414,00
420,90
427,80
434,70
441,60
448,50
455,40
462,30
469,20
476,10
483,00
489,90
496,80
503,70
510,60
517,50
524,40
531,30
538,20
545,10
552,00
558,90
565,80
572,70
579,60
586,50
593,40
600,30
607,20
614,10
621,00
627,90
634,80
641,70
648,60
655,50
662,40
669,30
676,20
683,10
690,00
759,00
828,00
897,00
966,00
1035,00
353,60
360,40
367,20
374,00
380,80
387,60
394,40
401,20
408,00
414,80
421,60
428,40
435,20
442,00
448,80
455,60
462,40
469,20
476,00
482,80
489,60
496,40
503,20
501,00
516,80
523,60
530,40
537,20
544,00
550,80
557,60
564,40
571,20
578,00
584,80
591,60
598,40
605,20
612,00
618,80
625,60
632,40
639,20
646,00
652,80
659,60
666,40
673,20
680,00
748,00
816,00
884,00
952,00
1020,00
1158
Conversion table
Pressure - temperature relation
(inch / mm)
inch
1/16
1/8
3/16
1/4
5/16
3/8
7/16
1/2
9/16
5/8
11/16
3/4
13/16
7/8
15/16
16/16
1/32
2/32
3/32
4/32
5/32
6/32
7/32
8/32
9/32
10/32
11/32
12/32
13/32
14/32
15/32
16/32
17/32
18/32
19/32
20/32
21/32
22/32
23/32
24/32
25/32
36/32
27/32
28/32
29/32
30/32
31/32
32/32
for saturated steam
mm
2/64
4/64
6/64
8/64
10/64
12/64
14/64
16/64
18/64
20/64
22/64
24/64
26/64
28/64
30/64
32/64
34/64
36/64
38/64
40/64
42/64
44/64
46/64
48/64
50/64
52/64
54/64
56/64
58/64
60/64
62/64
64/64
0,03125
0,0625
0,09375
0,125
0,15625
0,1875
0,21875
0,250
0,28125
0,3125
0,34375
0,375
0,40625
0,4375
0,46875
0,500
0,53125
0,5625
0,59375
0,625
0,65625
0,6875
0,71875
0,750
0,78125
0,8125
0,84375
0,875
0,90625
0,9375
0,96875
1,000
0,79
1,59
2,38
3,18
3,97
4,76
5,56
6,35
7,14
7,94
8,73
9,53
10,32
11,11
11,91
12,70
13,49
14,29
15,08
15,88
16,67
17,46
18,26
19,05
19,84
20,64
21,43
22,23
23,02
23,81
24,61
25,40
working
pressure
[bar]
[psi]
1
14,5
2
29,0
3
43,5
4
58,0
5
72,5
6
87,0
7
101,5
8
116,0
9
130,5
10
145,0
11
159,5
12
174,0
13
188,5
14
203,0
15
217,5
16
232,0
17
246,5
18
261,0
19
275,5
20
290,0
22
319,0
24
348,0
saturated steam
temperature
[C]
[F]
120,4
248,9
133,7
272,6
143,7
290,8
152,0
305,6
158,9
318,2
165,0
329,1
170,5
338,9
175,4
347,9
180,0
356,0
184,0
363,3
188,0
370,4
191,7
377,0
195,1
383,1
198,3
389,1
201,4
394,7
204,4
399,9
207,2
404,9
209,9
409,8
212,5
414,5
215,0
419,0
219,6
427,4
224,0
435,3
Working pressure - overpressure shown by a

pressure gauge.
Conversion table
(C / F)
Safety factor
(bursting pressure / working pressure)

hose applications
safety factor
Water hoses with maximum working pressure 1 MPa (10 bar).

Hose for other fluids, water slurries, solid materials and water with
working pressure above 1 MPa (10 bar).
Hoses for compressed air and other gases.
3:1
Hoses for fluids that may change into gases during pressure drop.
5:1
4:1
4:1
Rubber hoses for steam.
10 : 1
WATERBLAST hoses.
2,5 : 1
Safety factor values relate to hoses made of rubber and plastic materials
according to ISO 7751 standard.
-90
-80
-70
-60
-50
-40
-30
-20
-10
0
10
20
30
40
-130
-112
-84
-76
-58
-40
-22
-14
-4
32
50
68
86
104
50
60
70
80
90
100
125
150
200
250
300
350
400
500
122
140
158
176
194
212
257
302
392
482
572
662
752
932
1159
PVC and PA (nylon) hose characteristics
Recommended working temperature ranges from

-20C to +60C. A rise in temperature above +20C
causes considerable decrease of bursting pressure
and at the same time allowable working pressure.
working pressure [%]
Working pressure - temperature

relation for PVC hoses
Example: 11.25 bar (100%), working pressure at

+20C, about 6 bar (55%) at +40C.
Bending radius - diameter

relation for PVC hoses
Chart on the right shows minimum bending radiushose diameter relation for PVC hoses (without hose
contraction).
outside diameter [mm]
temperature [C]
bending radius [mm]
Chart on the right shows working pressure temperature relationship for PA hoses.
working pressure [%]
Working pressure - temperature

relation for PA hoses
temperature [C]
1160
Pressure drop for water hoses
flow rate [l/min]
water temperature +17,2C
pressure drop [bar /30 m]
1161
flow rate [l/min]
Pressure drop for air hoses
flow rate [l/min]
Pressure drop for oil hoses
1162
Thread recognition
V-thread
P - thread pitch
= 60 (metric, UNF, NPT)
= 55 (BSP)
calliper measurement
O.D.
[mm]
I,D.
[mm]
7,8 8,0
9,3 9,7
9,3 9,7
9,7 9,9
9,7 9,9
10,9 11,1
11,6 11,9
12,4 12,7
12,9 13,1
12,9 13,1
13,6 13,9
14,0 14,3
15,5 15,8
15,6 15,9
16,3 16,6
16,3 16,6
17,1 17,4
17,6 17,9
18,7 19,0
19,6 19,9
20,3 20,6
20,5 20,9
20,7 21,1
21,6 21,9
22,0 22,2
22,6 22,9
23,6 23,9
25,1 25,4
25,6 25,9
26,1 26,4
26,3 26,7
26,6 26,9
26,6 26,9
26,6 26,9
27,6 27,9
29,6 29,9
29,6 29,9
29,8 30,1
29,8 30,2
32,6 32,9
32,6 32,9
6,8 7,0
8,5 8,9
8,5 8,9
8,2 8,6
8,7 9,1
9,7 10,0
10,2 10,6
11,3 11,6
11,4 11,9
11,4 11,9
12,2 12,6
12,7 13,0
14,4 14,7
14,2 14,6
14,9 15,4
14,9 15,4
15,8 16,1
16,2 16,6
17,3 17,6
18,2 18,6
18,9 19,3
18,6 19,0
18,3 18,7
20,2 20,6
20,2 20,5
20,6 21,0
22,2 22,6
23,4 23,8
24,2 24,6
24,1 24,5
23,7 24,1
24,3 -24,7
24,6 25,0
25,2 25,6
26,2 26,6
27,4 27,8
28,2 28,6
27,6 27,9
27,8 28,1
30,5 30,9
31,2 31,6
thread check measurement

threads per
inch
28
27
20
20
19
18
18
18
19
18
16
16
16
14
14
14
14
14
14
14
12
12
14
thread pitch
[mm]
1
(0,91)
(0,95)
1,5
1
(1,27)
1,5
(1,27)
(1,34)
(1,41)
1,5
(1,41)
(1,41)
1,5
(1,34)
(1,41)
(1,59)
1,5
(1,59)
1,5
(1,59)
(1,81)
(1,81)
1,5
(1,81)
(1,81)
1,5
(1,81)
1,5
(1,81)
(1,81)
(2,12)
2
1,5
1,5
2
1,5
(2,12)
(1,81)
2
1,5
imperial pipe
BSP
BSPT
thread size
imperial
imperial pipe
metric
UNF UN UNS
NPT
(JIC, ORFS)
NPTF
M8 x 1
1/8
1/8
M10 x 1,5
M10 x 1
7/16-20
M12 x 1,5
1/2-20
1/4
1/4
M14 x 1,5
9/16-18
5/8-18
M16 x 1,5
3/8
3/8
11/16-16
M18 x 1,5
3/4-16
M20 x 1,5
13/16-16
1/2
1/2
M22 x 1,5
7/8-14
5/8
M24 x 1,5
1-14
M26 x 1,5
3/4
3/4
1.1/16-12
M27 x 2
M27 x 1,5
M28 x 1,5
M30 x 2
M30 x 1,5
1.3/16-12
7/8
M33 x 2
M33 x 1,5
1163
Thread recognition
calliper measurement
thread check measurement
O.D.
[mm]
I,D.
[mm]
threads per
inch
thread pitch
[mm]
33,0 33,2
33,0 33,3
32,9 33,4
35,6 35,9
36,2 36,5
37,6 37,9
37,6 37,9
40,9 41,2
41,6 41,9
41,5 41,9
41,4 42,0
42,5 42,8
44,6 44,9
44,6 44,9
47,3 47,6
47,4 47,8
47,3 47,9
50,5 50,8
51,6 51,9
51,6 51,9
59,4 59,8
59,9 60,2
63,3 63,6
64,6 64,9
65,4 65,7
72,7 73,0
74,9 75,2
87,5 87,9
88,5 88,9
112,6 113,0
113,9 114,3
129,4 129,8
138,0 138,4
139,4 139,7
139,8 141,3
163,4 163,8
167,8 168,3
218,5 219,0
30,3 30,8
30,8 31,2
30,3 30,8
33,4 33,8
34,3 34,7
34,8 35,1
36,2 36,6
38,7 39,1
39,4 39,8
39,0 39,5
39,2 39,6
40,6 41,0
42,4 42,8
43,2 43,6
45,1 45,5
44,8 45,3
45,1 45,5
48,6 49,0
49,4 49,6
50,2 50,6
56,5 56,8
56,4 56,7
61,3 61,8
62,6 63,0
62,7 63,0
68,8 69,1
72,2 72,5
84,9 85,3
84,7 85,1
110,1 110,5
110,2 110,6
123,2 124,0
135,5 135,9
127,5 127,9
11
12
11,5
(2,31)
(2,12)
(2,21)
2
(2,12)
(2,31)
1,5
(2,12)
2
(2,31)
(2,21)
(2,12)
2
1,5
(2,12)
(2,31)
(2,21)
(2,12)
2
1,5
(2,31)
(2,21)
(2,12)
2
(2,31)
(3,175)
(2,31)
(2,31)
(3,175)
(2,31)
(3,175)
6
(2,31)
9,7
(3,175)
(2,31)
(3,175)
(3,175)
160,9 161,4
12
11
12
11
11,5
12
12
11
11,5
12
11
11,5
12
11
8
11
11
8
11
8
11
8
11
8
8
imperial pipe
BSP
BSPT
1
thread size
imperial
imperial pipe
metric
UNF UN UNS
NPT
(JIC, ORFS)
NPTF
1.5/16-12
1
M36 x 2
1.7/16-12
1.1/8
M38 x 1,5
1.5/8-12
M42 x 2
1.1/4
1.1/4
1.11/16-12
M45 x 2
M45 x 1,5
1.7/8-12
1.1/2
1.1/2
2-12
M52 x 2
M52 x 1,5
2
2
2.1/2-12
M65 x 2
2.1/4
2.1/2
2.1/2
3
3
4
4
M130 x 6
5
5.1/2 (DIN 11)
5
6
6
8
Trapezoidal thread
ACME trapezoidal thread with thread angle = 29 used for fittings designed for gas (LPG).
O.D.
[mm]
I,D.
[mm]
threads per
inch
thread pitch
[mm]
thread
44,4
57
82,5
38,2
48,7
78,4
6
3
2
4,23
8,5
12,7
ACME 1.3/4
ACME 2.1/4
ACME 3.1/4
1164
Thread recognition
Round thread
Round threads (marked Rd) are used in food industry in DIN
11851 and SMS fittings.
P - thread pitch
= 30
O.D.
[mm]
I.D.
[mm]
threads per
inch
thread pitch
[mm]
thread
fitting
28
34
40
44
48
52
58
60
65
70
78
85
95
98
110
130
132
160
190
24,825
30,825
35,767
39,767
43,767
47,767
53,767
55,767
60,767
65,767
73,767
80,767
90,767
93,767
103,650
123,650
127,767
153,650
183,650
8
8
6
6
6
6
6
6
6
6
6
6
6
6
4
4
6
4
4
3,175
3,175
4,233
4,233
4,233
4,233
4,233
4,233
4,233
4,233
4,233
4,233
4,233
4,233
6,350
6,350
4,233
6,350
6,350
Rd 28 x 1/8
Rd 34 x 1/8
Rd 40 x 1/6
Rd 44 x 1/6
Rd 48 x 1/6
Rd 52 x 1/6
Rd 58 x 1/6
Rd 60 x 1/6
Rd 65 x 1/6
Rd 70 x 1/6
Rd 78 x 1/6
Rd 85 x 1/6
Rd 95 x 1/6
Rd 98 x 1/6
Rd 110 x 1/4
Rd 130 x 1/4
Rd 132 x 1/6
Rd 160 x 1/4
Rd 190 x 1/4
DIN
DIN
SMS
DIN
SMS
DIN
DIN
SMS
DIN
SMS
DIN
SMS
DIN
SMS
DIN
DIN
SMS
DIN
DIN
DN
[mm]
10
15
25
20
32
25
32
38
40
51
50
63,5
65
76
80
100
101,6
125
150
[inch]
3/8
1/2
1
3/4
1.1/4
1
1.1/4
1.1/2
1.1/2
2
2
2.1/2
2.1/2
3
3
4
4
5
6
Fittings - thread and connection type

BSP
BSPT
JIC
JIS
M
NPSM
NPTF
ORFS
G
R
SAE
UNC
UNF
W
British Standard Parallel Pipe Thread

British Standard Taper Pipe Thread
Joint Industry Conference (SAE 74)
Japanese Industrial Standard (e.g. Komatsu)
Metric
American National Pipe Thread - Straight Mechanical
American National Pipe Thread - Taper (Dry Seal)
O-Ring Front Seal
= BSP
= BSPT
Society of Automotive Engineers (90)
Unified Coarse Thread
Unified Fine Thread
Whitworth Thread
- imperial pipe thread

- imperial pipe thread, tapered
- imperial UNF thread
- imperial BSP or metric thread
- imperial pipe thread
- imperial pipe thread, tapered
- imperial
- imperial
- imperial
1165
Simple calculations of hose parameters
L
d
V
Q
w
- hose length [dm],

- hose inside diameter [dm],
- hose inside diameter volume [ l ],
- flow rate (amount of liquid flowing through the hose in a certain amount of time) [l/min],
- flow speed [m/s].
Hose volume:
3,14 x d x d x L
d2
L =
4
4
V=
[l]
Flow rate:
Q = 600
600 x 3,14 x d x d x w
d2
w=
4
4
[ l/min ]
Flow speed:
w=
4Q
4xQ
=
2
600 d 600 x d x d x 3,14
[ m/s ]
Hose diameter required for given flow rate and flow speed:
d=
4Q
=
600 w
4xQ
600 x w x 3,14
[ dm ]
Example:
flow rate - 30 l/min, flow speed - 4 m/s
d=
4 x 30
=
600 x 4 x 3,14
0,0159
= 0,126 dm = 12,6 mm
A hose with 1/2 (12.7 mm) diameter is the most suitable for the conditions mentioned in the example.
Typical flow speeds used in installations

application and medium
hydraulics -hydraulic oil
industrial applications - water,
chemicals, fuels
industrial applications - steam
industrial pneumatics - air
type of installation
suction hoses
suction-delivery hoses
delivery hoses
suction hoses
gravitational flow
delivery hoses under pump pressure
saturated steam pipelines
pneumatic installations
flow speed
[m/s]
0,5 1,2
2,0 4,0
3,0 7,0
0,6 1,1
1,0 2,0
1,5 4,0
10,0 40,0
6,0 20,0
Matching the hose assembly to the installation must allow for all limitations associated to its structure e.g. for steel
corrugated hoses the speed flow should be limited to avoid vibrations causing premature hose damage.
1166
Flange connection sizes PN and ASA
D - outer flange diameter
K - bolt circle diameter
d1 - mating surface diameter
L - bolt hole diameter
PN flange sizes in accordance with EN 1092-1. ASA flange sizes in accordance with ASME/ANSI B16.5:1996.
nominal dimensions
[mm]
15
20
25
32
40
50
65
80
100
125
150
200
250
[inch]
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
8
10
PN6
D
80
90
100
120
130
140
160
190
210
240
265
320
375
K
55
65
75
90
100
110
130
150
170
200
225
280
335
d1
40
50
60
70
80
90
110
128
148
178
202
258
312
D
95
105
115
140
150
165
185
200
235
270
300
360
425
K
65
75
85
100
110
125
145
160
190
220
250
310
370
d1
45
58
68
78
88
102
122
138
162
188
218
278
335
D
88,9
98,4
108,0
117,5
127,0
152,4
177,8
190,5
228,6
254,0
279,4
342,9
406,4
K
60,3
69,9
79,4
88,9
98,4
120,7
139,7
152,4
190,5
215,9
241,3
298,5
362,0
d1
34,9
42,9
50,8
63,5
73,0
92,1
104,8
127,0
157,2
185,7
215,9
269,9
323,9
nominal dimensions
[mm]
15
20
25
32
40
50
65
80
100
125
150
200
250
[inch]
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
8
10
[inch]
1/2
3/4
1
1.1/4
1.1/2
2
2.1/2
3
4
5
6
8
10
no. of bolts thread

4
M10
4
M10
4
M10
4
M12
4
M12
4
M12
4
M12
4
M16
4
M16
8
M16
8
M16
8
M16
12
M16
D
95
105
115
140
150
165
185
200
220
250
285
340
395/405
K
65
75
85
100
110
125
145
160
180
210
240
295
350/355
d1
45
58
68
78
88
102
122
138
158
188
212
268
320
L
14
14
14
18
18
18
18
18
22
26
26
26
30
no. of bolts thread

4
M12
4
M12
4
M12
4
M16
4
M16
4
M16
8
M16
8
M16
8
M20
8
M24
8
M24
12
M24
12
M27
D
95
105
115
140
150
165
185
200
235
270
300
375
450
K
65
75
85
100
110
125
145
160
190
220
250
320
385
d1
45
58
68
78
88
102
122
138
162
188
218
285
345
no. of bolts thread

4
1/2
4
1/2
4
1/2
4
1/2
4
1/2
4
5/8
4
5/8
4
5/8
8
5/8
8
3/4
8
3/4
8
3/4
12
7/8
D
95,3
117,5
123,8
133,4
155,6
165,1
190,5
209,6
254,0
279,4
317,5
381,0
444,5
K
66,7
82,5
88,9
98,4
114,3
127,0
149,2
168,3
200,0
235,0
269,9
330,2
387,3
d1
34,9
42,9
50,8
63,5
73,0
92,1
104,8
127,0
157,2
185,7
215,9
269,9
323,9
PN25
nominal dimensions
[mm]
15
20
25
32
40
50
65
80
100
125
150
200
250
PN10/16
L
11
11
11
14
14
14
14
18
18
18
18
18
18
L
14
14
14
18
18
18
18
18
18
18
22
22
22/26
no. of bolts thread

4
M12
4
M12
4
M12
4
M16
4
M16
4
M16
8
M16
8
M16
8
M16
8
M16
8
M20
8/12
M20
12
M20/24
PN40
ASA 150
L
15,9
15,9
15,9
15,9
15,9
19
19
19
19
22,2
22,2
22,2
25,4
L
14
14
14
18
18
18
18
18
22
26
26
30
33
no. of bolts thread

4
M12
4
M12
4
M12
4
M16
4
M16
4
M16
8
M16
8
M16
8
M20
8
M24
8
M24
12
M27
12
M30
ASA 300
L
15,9
19
19
19
22,2
19
22,2
22,2
22,2
22,2
22,2
25,4
28,6
no. of bolts thread

4
1/2
4
5/8
4
5/8
4
5/8
4
3/4
8
5/8
8
3/4
8
3/4
8
3/4
8
3/4
12
3/4
12
7/8
16
1
1167
Hydraulic symbols
General symbols
graphic symbol
description
graphic symbol
description
direction and symbol of hydraulic

control
enclosure outline
direction and symbol of pneumatic

control
pilot line
variability of pump, spring, etc.
mechanical element
(shaft, lever, piston)
Symbols of energy transformation elements

graphic symbol
description
graphic symbol
description
one-way pump with constant flow

rate
one-way actuator
two-stream pump
two-way actuator
Hydraulic symbols of actuators (cylinders)

graphic symbol
description
graphic symbol
description
single acting cylinder with spring
double-acting single end rod with

cushioning on one side
double acting cylinder
double-acting double end rod
Symbols of flow direction control elements *

graphic symbol
description
check valve
check valve with spring
shut-off valve
* - dividers - see next page
1168
graphic symbol
description
control check valve, double (load
holding valve for double-acting
actuator)
- permissible flow directions:
A A1 at the same time B1 B
B B1 at the same time A1 A
Hydraulic symbols
Symbols of pressure control elements
graphic symbol
description
full flow valve

- pressure relief valve, variable
(safety or overflow)
Symbols of flow rate control valves

graphic symbol
description
graphic symbol
description
non-adjustable restrictor
adjustable restrictor
- flow restrictions depend on

medium viscosity
- flow restrictions depend on

medium viscosity
adjustable check valve with spring
flow divider
Symbols of dividers
control symbols
graphic symbol
control symbols
description
graphic symbol
description
hand operated
two-way directional valve
lever
three-way directional valve
spring
two ways combined - normally open
push button
- arrow signifies direction of the

medium flow (from higher to lowe
pressure)
three-position lock
two ways closed - flow closed
electromagnet with single solenoid
three-way valve
(examples)
electromagnet with push/pull

solenoid
four-way valve
(examples)
indirect hydraulic control by

pressure increase
indirect proportional hydraulic
control by pressure increase
indirect pneumatic control
indirect proportional pneumatic
control
example (divider 4/3)

4/3
number of flows
number of positions
- 0 (rest position)
- a, b (set position)
- P (inlet flow)
- T (outlet flow)
- A, B (flows)
1169
Hose assembly
General guidelines in the table below concern all flexible pressure hoses (hose assemblies).
INCORRECT
CORRECT
REMARKS
HOSE TWISTING ROUND ITS AXIS:
hose twisted
during assembly
All flexible hoses are particularly prone to damage

when they are twisted round its axis.
To prevent twisting it is advised to:
hose subjected to twisting

during 3D kinetics in an
installation
1. While attaching the hose to the connecting part

of an installation we should hold down the hose
with the spanner to avoid its twisting.
2. In moving installations, the kinetics of the hose
has to be two dimensional. If three dimensional
kinetics occurs, the hose is twisted during
operation and prematurely damaged.
R < R min.
TOO SMALL BENDING RADIUS:
R min.
R min.
R min.
1,5 D
In the catalogue the minimum bending radius refers

to a certain type of hose (measured towards inward
bend). If the bending radius in the installation is
smaller than the one stated in the catalogue, or
hose is kinked, premature hose damage will take
place. To prevent premature hose failure, it is
advised to:
1. Provide correct bending radius.
2. Provide a straight hose section (approx. length
of 1.5 hose outside diameter) in the area close
to hose fittings.
3. Use proper type of angular fittings and
connecting parts (if needed).
EXTERNAL DAMAGE:
External damage is the most frequent cause of
premature hose failure.
To prevent premature hose failure it is advised to:
damage
R < R min.
damage
distance
1. Provide proper distance between hose and

sharp edges or construction elements.
2. Protect the hose against abrasion and damage
with special protective covers.
3. Handle hoses with care and attention.
REMEMBER!
Incorrect installation and external damage are the main causes of hose failure.
1170

Tubes Catalogue

Încărcat de

Informații document

Descriere originală:

Drepturi de autor

Formate disponibile

Partajați acest document

Partajați sau inserați document

Opțiuni de partajare

Vi se pare util acest document?

Este necorespunzător acest conținut?

Drepturi de autor:

Formate disponibile

Tubes Catalogue

Încărcat de

Drepturi de autor:

Formate disponibile

GENERAL TERMS AND CONDITIONS

General terms and conditions

the number of that offer must be included in the order

GENERAL TERMS AND CONDITIONS

the complaint is to be resolved at longer time agreed

PRODUCT QUALITY AND WARRANTY

We do not allow the cession of rights resulting from any

The company guarantees meeting all technical

GENERAL TERMS AND CONDITIONS

ENQUIRY - INFORMATION CARD

medium: (type of substance transferred within the hose)

classification to 97/23/WE (mark X)::

dangerous - explosive (E)

possible external damage to

end fitting no 1: (type, size, material)

end fitting no 2: (type, size, material)

expected delivery time:

space for a drawing of a hose assembly, installation or additional remarks:

product used so far:

INDUSTRIAL HOSES - general purpose

INDUSTRIAL HOSES - general purpose

INDUSTRIAL HOSES - general purpose

RAGNO N 20-40 BAR

Abrasive resistant polyurethane

INDUSTRIAL HOSES - general purpose

INDUSTRIAL HOSES - general purpose

Smooth transparent polyurethane

Smooth transparent polyurethane

INDUSTRIAL HOSES - general purpose

Smooth, transparent polyurethane

INDUSTRIAL HOSES - general purpose

INDUSTRIAL HOSES - general purpose

White, smooth PVC

INDUSTRIAL HOSES - general purpose

Grey, smooth PVC

White, smooth PVC

Fittings for THERMOCLEAN hoses

BSP thread size

INDUSTRIAL HOSES - general purpose

Black, smooth NBR/PVC compound

INDUSTRIAL HOSES - general purpose

PLICORD ARCTIC ORTACTM

ECO black rubber

INDUSTRIAL HOSES - general purpose

INDUSTRIAL HOSES - air and water

cooling installations in steel mills,

Two layers of black PVC

INDUSTRIAL HOSES - air and water

Black plasticized PVC

INDUSTRIAL HOSES - air and water

* - at 3 bar working pressure

INDUSTRIAL HOSES - air and water

Black, smooth EPDM rubber

White, smooth EPDM rubber

INDUSTRIAL HOSES - air and water

Black, smooth NBR rubber

INDUSTRIAL HOSES - air and water

INDUSTRIAL HOSES - air and water

White, smooth SBR rubber

White, smooth butyl rubber

INDUSTRIAL HOSES - air and water

Black, smooth synthetic rubber

INDUSTRIAL HOSES - air and water