Documente Academic
Documente Profesional
Documente Cultură
Control Systems
Automatic or Manual Operation Hydronic & Electric Systems
Idling Critical snow melt locations such as hospitals and vehicle ramps must melt snow quickly to avoid accumulation. Idling reduces response time by preheating the slab just below the melting point. Once snow or ice is detected, the slab is then heated to the melting temperature.
2008 P 435 - 04/08
Mixing Non-condensing boilers require protection from thermal shock and ue gas condensation. A mixing valve or variable speed injection pump regulates the uid temperature returning back to the boiler, ensuring that the boiler minimum temperature is maintained. Maximum System T Rapid temperature increases cause uneven expansion within a concrete slab. Over time, this can lead to cracks in the slab. Setting a maximum temperature difference between the supply and return fluid temperatures helps protect the slab.
2 of 4
667
664
1 or 2
039
072 090
040
3 of 4
2008
P 435 - 04/08
665
665
Power Contactor
667 or 664
665 or 664
Snow / Ice or Slab Sensor Primary Pump Boiler Supply Sensor See page 3 for mixing options Mix Mix Supply System Sensor Pump Modulating (with 664) or On / Off (with 650 or 665) Steam Valve System Pump
664 or 2 x 665
Boiler Pump
Aquastat
DHW Pump
Primary Pump
Additional applications can be downloaded from the Literature section of the tekmar website.
tekmar Control Systems Ltd., Canada tekmar Control Systems, Inc., U.S.A. Head Office: 5100 Silver Star Road Vernon, B.C. Canada V1B 3K4 (250) 545-7749 Fax. (250) 545-0650 Web Site: www.tekmarcontrols.com
Product design, software and literature are Copyright 2008 by: tekmar Control Systems Ltd. and tekmar Control Systems, Inc.
4 of 4
All specifications are subject to change without notice. Printed in Canada. P 435 - 04/08.