Documente Academic
Documente Profesional
Documente Cultură
ADVERTISEMENT
s10lenovo.com
insanelymac.com
netbooktech.com
msiwind.net
osx86.thefreesuite.com
Credits go to everyone who created the files and so on, I did nothing but compile and
install everything, thus creating this procedure of my experience.
This guide [like many others] covers the installation of the msiwind distro on a Lenovo
S10. It is to help fellow enthusiasts that want to install a second OS on their system.
Remember, if you like OSX, go buy it! Also as a reminder, this guide is a dual-boot
guide [assuming XP is already installed], though I’m sure you can figure out how to do
a single-boot method from this. There are MANY diffrent ways to go about doing this..
this is just what I did.
Neither I nor any of the forums listed above are to be held responsible for
anything that happens [negative or not]... and know that you are... proceeding at
your own risk.
The first thing I did was uninstall OKR [one key recovery], so for those of you looking
for that option, it should be that same, but with 3 partitions. One for XP, one for OKR,
and one for OSX.
Here are my 2 partitions. Yes, XP was converted to NFTS from the default FAT32 using
partition magic 8, which was graciously provided by my boss. Also you wont see the 3rd
default EISA 7GB partition, which I deleted. Keep in mind you want to format the OSX
volume as NTFS and name it whatever you want it to be called, it’ll show up later in disk
utility.
Shut down windows. This next step requires the msiwindosx.iso burnt as well as an
external DVD player ready to go.
Turn the computer on while tapping F12 [Fn+F11] so it gives boot options. Choose the
external drive and press enter when prompted with OSX disc. It'll now go through
loading everything it needs so don’t worry just wait a bit
Here is a shot of the S10 w/ my 22". Doesn’t the 22” look massive? Yikes, like a regular
laptop to a big screen Plasma almost. Hah.
Once darwinx86 is done loading everything, it'll go through the regular OSX install
prompts, so just follow them for the most part. I have pics just incase
When the OSX installer loads, select "Utilities" followed by 'Disk Utility"
Once you do that you'll see you HDD and 2 partitions. One disk0s1, which is your XP
partition and the other one for OSX
Select your OSX HDD [osx in my case] and select the erase tab. then from the volume
format drop down menu choose Extended Journaled and proceed to erase.
After that’s done, let it continue w/ your OSX install. Agree to the prompt, then select
the partition you want to install it on [osx for me]
It’ll want to check your installation disk first, followed by the installation. Go take a
break... this'll take a while, but make sure the laptop is plugged in!!
Once done, it'll restart... and you'll probably end up getting a HFS+ partition error upon
boot like me. If you don’t, just skip to the bottom, otherwise read on
Kill the computer and start it while tapping F12 and boot the DVD install disk again.
It’ll go through its whole sequence and once you get to the OSX installer, select Utilities
> Terminal from the bar at the top.
When you press enter it'll ask if you're sure you want to mess w/ it [i'm not quite sure
what it asks since I don’t have pics or remember it well, but it's something w/ boot
record lol]. Anyway say, "Hell yea I wanna mess w/ it... I didn’t come this far to be
stopped”
Once that’s done Kill the computer [if it hasn’t restarted] and turn it on again... now the
Darwin boot loader should start up fine
At this point you should be able to get into XP with out a problem when selected from
the Darwin screen, but when you choose OSX, you'll end up in an endless loop when
you get to the migration assistant/file transfer screen.
The next steps are to bypass it, but be careful while you type it, and recheck before you
press enter just incase. The only reason I’m giving a heads up is because I had to do
this THREE bloody times to get it right... the only reason I even caught my mistake
and didn’t give up was because I had pics as documentation of my steps. And it’s upon
seeing those pics I realized I had stupid mistakes like a period here or there or a
spelling mistake. -__-
“ -s ”
Followed by
“ /sbin/fsck –fy “
“ /sbin/mount –uw / “
Now type
“ cd /Volumes/****/var/db/ “
* = this is your volume name, which is “osx” in my case. If you don’t remember what
you named it, check by looking back before you typed in the /mount command. It
should say “The volume *your.volume.name.here* appears to be ok”
Type
“ touch .AppleSetupDone “
Now, we’ll be creating a password for the root account, so make sure you remember
this. I made it the same as my usual login password.
Type
“ passwd “
It’ll now ask you to enter your password, and re-enter it. Don’t worry, the cursor
doesn’t move, so it’s not frozen or anything
“ exit “
Once that is done, it’ll logout, restart, do its thing and go straight to the logon screen!
This is where you type “ root “ as the account name and whatever password you choose
earlier. Once you do that it’ll log you in.
Now, the first thing you want t do is to create an Administrator account for yourself
(don’t use root.. not to good of an idea)
I went to system preferences > accounts > and created myself a new admin account.
Once I did that, I logged out of “root” and logged back in as “ amru ”
Now that we have the OS installed and can boot to it fine (test it out! Restart a couple
times alternating the OS’s), we’ll move on the next step of getting stuff to work like
wifi, video, audio etc.
Open Terminal (applications > Utilities > Terminal) and drag the unzipped file into the
Terminal window. It'll tell you straight up what you need to type to run it. Type that and
your password and exit terminal.
Now reboot. Once you restart you airport should be on and it *should* detect a WAP, if
not make sure your SSID is broadcasting, or just type it in manually like I did. If you
can’t get it to work... just troubleshoot it further since airport should be on now and
that problem was solved.
Now head over to the software update and let it run, and once again make sure you
have it plugged in. After its done it'll restart and you'll log back in and probably notice
not only is the wifi dead, but the grapix are now at 800x600 instead of the previous
1024x600. Re-install the WiFi like you did earlier. Once you have that we'll move on to
updating the grapix.
From > *Miglos .kexts* <, install the following. You can install the rest but I had some
problems the first and second time so I selected and installed these.
ACPIPS2Nub.kext
AppleACPIBatteryManager.kext
AppleACPIPlatform.kext
ApplePS2Controller.kext
EHCISleepEnabler.kext
For the most part now everything should be working.. except audio. To get audio to
work this is what I did, while restarting between each step.
5. Install Spark. I used Spark to edit/add a new Hotkey to the System. Now if I press
Cntrl+F9 it'll toggle Un/Mute. > *Spark* <
Last edited by amru on Tue Mar 03, 2009 3:35 pm, edited 8 times in total.
Advertisement
drive?
donaldb wrote:
scottyinco
I bookmarked it as well. looking forward to the rest of the info Master
now I need a new hard drive for my red racer. where is the best place to get another
Posts: 300
drive? Joined: Tue Sep 30, 2008
4:49 pm
Location: Broomfield, CO USA
Black Lenovo S10, 2gb RAM, 500gb Western Digital HDD, Bluetooth, 6-cell chinese knockoff
battery.
This is a nice post! But i can not download the files for the audio.
my email : andy.yyc@gmail.com
This is a nice post! But i can not download the files for the audio.
my email : andy.yyc@gmail.com
I just checked the links, and they all work for me... did you click on the link instead
of rightclick + saveas?
yyc2003 wrote:
Hi amru ;
This is a nice post! But i can not download the files for the audio.
my email : andy.yyc@gmail.com
I just checked the links, and they all work for me... did you click on the link instead
of rightclick + saveas?
Display posts from previous: All posts Sort by Post time Ascending Go Next
WHO IS ONLINE
Users browsing this forum: No registered users and 3 guests
Board index The team • Delete all board cookies • All times are UTC - 8 hours [ DST ]