Sunteți pe pagina 1din 2

Electro-Deionisation (EDI) Systems

u HEADWORKS BIOLOGY SEPARATION MEMBRANE DISINFECTION BIOSOLIDS SYSTEMS

Custom Design

Experience

High Quality

Responsiveness

Applications

- RO Permeate Polisher Applications

Two separation technologies, membranes and ion exchange, are combined into one sealed, self-contained unit. The primary use of EDI has focused on RO permeate polishing. This technology is widely used in industry as a final polisher replacing traditional ion exchange units which required chemical regeneration using base and acid reagents.

MAIN FEATURES
Custom Build and Modular Units High rejection of soluble ionic load up to 98+% No chemical regeneration required : Electrical current to continuously regenerate the resin inside the cell Stable production of purified water electro-deionisation Specific technology
Anderson systems incorporate E-Cell technology which is a combination of flat sheet membranes and ion exchange resin. A combination of pressure and electrical driving force allows this technology to produce very high purity water for industrial applications. Modular design and process specific criteria allows the greatest flexibility in providing skids that industry requires for the production of high purity water used in their facilities.

Complex Process Development Capability Quality Assurance and Control Management

HOW IT WORKS
The fundamental principle of EDI technology is the use of pressure and electrical current to separate soluble ions from water through a semi permeable material which includes both cationic and anionic membranes. Each cell incorporates specific ion exchange resin between the two types of membranes allowing negative and positive ions to only pass through one of the membranes. The resulting product stream is high purity water and a concentrate stream which is usually recycled back to an upfront RO system for reprocessing.

TECHNICAL DATA
Anderson skids units are custom manufactured to specific client requirements. All system capacities can be achieved through modular design. Utilizing these building blocks flow rates from Materials - Pressure driven system utilizing semi permeable polymer compounds. - From carbon steel to specialty alloy - Blasted, primed, finished coated with two-part epoxy 100 to 1000 gpm are easily designed and can be physically constructed to fit into all variations of foot prints specified by our clients. Remote controls and alarms Intrinsic Alarms for: High and Low Pressure, Temperature, Pressure Drop Feed, Conductivity. Control System could include PLC systems for both local and remote and could include linkage to SCADA control center.


Flexible Connections

PVC and SS Piping

EDI Modules

Recirculation Pump

INDUSTRIAL TREATMENT LINE


Water Intake from river or lake Water Reuse

Pre-Treatment
Technologies: From screening to Filtration

Primary Separation
Technologies: - Membrane (UF/NF/RO) - Ion exchange - Decarbonation

Post Treatment
Technologies: - Membrane (2nd Pass RO) - Ion exchange - EDI - Condensate Polisher

Plant Operations
Industrial Process

WW Treatment
Industrial Wastewater Treatment Plant

Rejection into natural environment

Electro-deionisation (EDI) Systems Anderson Process Water Treatment Raw Water Process Water Process Industrial Wastewater WWTP Treated Wastewater

Manufacturers Representative:

Contacts

www.degremont-technologies.com

Degrmont Technologies - Anderson 160 King Street W., 2nd Floor Dundas, Ontario L9H 1V4 CANADA Tel: Fax: + 1 905 627 9233 + 1 905 627 2381

e-mail: info-anderson@degtec.com

Copyright 2007 Anderson Water Systems Inc., Degremont Technologies - SYS07202EN-V1-06/2007 - Subject to change without prior notice, contact Degremont Technologies for more information.

S-ar putea să vă placă și