Documente Academic
Documente Profesional
Documente Cultură
DATA SHEET
For a complete data sheet, please also download:
The IC06 74HC/HCT/HCU/HCMOS Logic Family Specifications The IC06 74HC/HCT/HCU/HCMOS Logic Package Information The IC06 74HC/HCT/HCU/HCMOS Logic Package Outlines
Philips Semiconductors
Product specication
74HC/HCT153
The logic equations for the outputs are: 1Y = 1E.(1I0.S1.S0+1I1.S1.S0+ +1I2.S1.S0+1I3.S1.S0) 2Y = 2E.(2I0.S1.S0+2I1.S1.S0+ +2I2.S1.S0+2I3.S1.S0) The 153 can be used to move data to a common output bus from a group of registers. The state of the select inputs would determine the particular register from which the data came. An alternative application is a function generator. The device can generate two functions or three variables. This is useful for implementing highly irregular random logic. The 153 is similar to the 253 but has standard outputs.
QUICK REFERENCE DATA GND = 0 V; Tamb = 25 C; tr = tf = 6 ns TYPICAL SYMBOL tPHL/ tPLH PARAMETER propagation delay 1In, 2In to nY Sn to nY nE to nY CI CPD Notes 1. CPD is used to determine the dynamic power dissipation (PD in W): PD = CPD VCC2 fi + (CL VCC2 fo) where: fi = input frequency in MHz fo = output frequency in MHz CL = output load capacitance in pF VCC = supply voltage in V (CL VCC2 fo) = sum of outputs 2. For HC the condition is VI = GND to VCC For HCT the condition is VI = GND to VCC 1.5 V ORDERING INFORMATION See 74HC/HCT/HCU/HCMOS Logic Package Information. input capacitance power dissipation capacitance per multiplexer notes 1 and 2 CONDITIONS HC CL = 15 pF; VCC = 5 V 14 15 10 3.5 30 16 17 11 3.5 30 ns ns ns pF pF HCT UNIT
December 1990
Philips Semiconductors
Product specication
74HC/HCT153
December 1990
Philips Semiconductors
Product specication
74HC/HCT153
OUTPUT nY L L H L H L H L H
December 1990
Philips Semiconductors
Product specication
74HC/HCT153
TEST CONDITIONS VCC WAVEFORMS (V) 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0 2.0 4.5 6.0
Fig.6
tPHL/ tPLH
ns
Fig.7
tPHL/ tPLH
ns
Fig.7
tTHL/ tTLH
ns
Figs 6 and 7
December 1990
Philips Semiconductors
Product specication
74HC/HCT153
The value of additional quiescent supply current (ICC) for a unit load of 1 is given in the family specifications. To determine ICC per input, multiply this value by the unit load coefficient shown in the table below.
AC CHARACTERISTICS FOR 74HCT GND = 0 V; tr = tf = 6 ns; CL = 50 pF Tamb (C) 74HCT SYMBOL PARAMETER +25 min. tPHL propagation delay 1In to nY; 2In to nY propagation delay 1In to nY; 2In to nY propagation delay Sn to nY propagation delay nE to nY output transition time typ. 19 40 to+85 max. min. 34 max. 43 40 to+125 min. max. 51 ns 4.5 Fig.6 UNIT VCC (V) WAVEFORMS TEST CONDITIONS
13
24
30
36
ns
4.5
Fig.6
20 14 7
34 27 15
43 34 19
51 41 22
ns ns ns
December 1990
Philips Semiconductors
Product specication
74HC/HCT153
Fig.6 Waveforms showing the input (1In, 2In) to output (1Y, 2Y) propagation delays and the output transition times.
Fig.7
Waveforms showing the select input (S0, S1) and the output enable input (E) to output (1Y, 2Y) propagation delays and the output transition times.
December 1990