Documente Academic
Documente Profesional
Documente Cultură
9/11/2013
<="" a="">
CadToolChest FREE
for AutoCAD
Page Last Updated Dec. 22, 2012
FAQs
This section of CadToolChest FREE contains a library of hard to find AutoLisp programs designed to run within AutoCAD (a popular, although expensive, 2D/3D Computer Aided Drafting system). Some are dialog driven, some are not, and some can be called as sub-functions by your own AutoLisp programs. For information on AutoCAD click HERE For non-AutoCAD CadToolChest FREE programs and other Freeware, click the links in the left border.
Version
2012-1221 (LSP)
AutoCAD Version
2002 thru 2013
3D Butt Weld Reducing Elbow An AutoLisp command, named 3dRedELL, that constructs a 3D Butt Weld Recomended PAYware
2012-1221 Reducing Elbow. One of the sub-functions can also be called by your own AutoLisp (LSP) programs to create a 3D Butt Weld Reducing Elbow.
2012-1221 (LSP) 2012-1221 (LSP) 2012-1221 (LSP) 2012-1221 (LSP) 2012-1221 (LSP) 2012-1221 (LSP) 2012-1221 (LSP) 2012-1221 (LSP) 2012-1221 (LSP)
3D Pipe
An AutoLisp command, named 3DP, that creates 3D Pipe using AutoCAD 3DSolid Cylinders. A pipe can be constructed with or without wall thickness.
2002 thru 2013 2002 thru 2013 2002 thru 2013 2002 thru 2013 2002 thru 2013
Fillet Zero
An AutoLisp command, named F0 (that's a zero). It fillets two objects with radius set to zero.
CadToolChest-Alias
An AutoLisp sub-function that substitutes a name of your choice for any of the standard CadToolChest command names. This does not change the name of the sub-functions.
TOP
Intersection of a Line and a Plane An AutoLisp command, named ILP, that locates the intersection between a line
and a plane. Its sub-function can also be called by your own AutoLisp programs.
Is It A Point
An AutoLisp sub-function that determines if a list is a 2d or 3d coordinate.
Polar 3d
An AutoLisp sub-function that returns the 3D coordinate at a 3D angle and distance 2012-1221 from another 3D coordinate. The 3D angle can be specified in two ways; either (LSP) provide the angle in the xy plane and the angle from the xy plane, or provide two 3D coordinates. 2002 thru 2013
RRRotate
http://bellsouthpwp2.net/C/a/CadTools/Free/CadToolChest-Free.html
2012-121/2
9/11/2013
RRRotate
An AutoLisp command, named RRR , that is similar to the standard AutoLisp Rotate command but uses reference angles for both the "from" and "to" angles.
2012-1221 (LSP)
2011 thru 2012-122013 An AutoLisp dialog box driven command, named SHACKLE, that constructs 2D 21 (should work in (Top, Front and Side views) and 3D Crosby 2130, 2140, and 2150 series shackles (LSP) 2002 thru (catalogs 2002, 2005 & 2006). 2010)
Shackle
Shortest Distance between two Objets or a Point and Object An AutoLisp command, named SDIST, that locates, identifies, and displays the
shortest distance between two objects, or between a 3D point and an object. Its sub-functions can also be called by your own AutoLisp programs.
Welded Flange
An AutoLisp dialog box driven command, named FLANGE , that constructs 2D and 3D piping Weld Flanges.
All programs and documentation are subject to change without notice. Even though a program is listed as tested in a particular version of AutoCAD and not in another, it is likely that it will function properly in newer versions, and perhaps even in earlier versions. Feel free to test them (using a test drawing) in whichever version you are using. Some programs are provided with an LSP file and a FAS file. Only one is needed for execution, and either can be used. The FAS is smaller and loads a little faster. But don't loose the LSP file as it is the source code and will be needed if you want to make changes to the program. These programs are distributed, by CadToolChest, as Freeware without guarantee or warranty of any type. You may freely use, modify and/or distribute them for personal or commercial use, but you may not sell or charge for them or any portion of them. If bundled with a product that is sold, you must make them available for free. As customary, acknowledge the original author's contribution and include this notice if you build upon or distribute this work.
TOP
The author of CadToolChest retains all copyrights other than described above.
C ON T AC T
C AD T OOL C H E S T e - Mail
Feedback Form
(e-Mail address not required)
Visitors since 2006/10/06 <="" a="" height="17" hspace="2" vspace="2" width="162" border="1">
USA
http://bellsouthpwp2.net/C/a/CadTools/Free/CadToolChest-Free.html
2/2