Documente Academic
Documente Profesional
Documente Cultură
General Features
Testing sample varieties: soft magnetic ferrite, permalloy, amorphous and nano crystal. Test sample shapes: toroid, E and U shapes. Test samples with closed magnetic circuit can be directly winded and measured on samples. Magnetizing
magnetic field intensity through the measurement of pressure drop on non inductive resistance, magnetic field peak value can be locked through digital feedback, magnetic field lock precision 0.5%.
Magnetic induction obtained through
digital integration of coil measuring voltage, magnetic induction peak value locked through digital feedback, magnetic induction lock precision 0.5%.
Power source and sampling amplifier integrated into a casing with simple interface: one RS232 interface
connected to the computer, two way voltage alarm connected to high speed A/D card.
Different power sources can be selected according to different test requirements: 1 kHz ~ 300 kHz or 500
dynamic magnetic characteristic parameters such as a, d, Pc, Br and Hc, and calculate ', '', L, R, Q and AL, etc.
Automatic and continuous measurement up to 255 testing points, the testing time of every testing point is
process.
Sampling waveform and instrument status under real-time monitoring, and can be stopped at any time. The effective sectional area and length of magnetic path of samples can be calculated according to the
schemes, adopt text format, can be conveniently typed into other software.
Display I(t), U(t) and B(t) sampling waveform and B(H) hysteresis loop, and coordinate message at every
,a(H) permeability curve, ua(F) permeability curve, Ps(B) damage curve and Ps(F) damage curve, and can display coordinate message at every data point on the curve.
B(H) magnetization curve, ua(F) permeability curve, Ps(B) damage curve and Ps(F) damage curve
measured under different conditions can be combined on one drawing for comparative analysis.
Set up upper and lower limits according to ua, Ps, Bm, Br, Hc and Hm, etc. Qualify test result and
Chinese and English format can be adopted to facilitate adding user mark and enterprise name
Multiple unit systems optional to satisfy the application habits of different users.
System Specifications
Adopt volammetry to measure loss Ps and amplitude permeability a and loss angle , when test frequency is 50 kHz, conduct test on ferrite circular ring sample with standard size (d1 = 40 mm, d2 = 32 mm, h = 6 ~ 10 mm), technical indices as follows:
Parameters measured
Uncertainty (k = 2) Repeatability (constant temperature)
Bm (%) Br (%)
1 0.5 1.5 1
Hc (%) ua (%)
1.5 1 1 0.5
Ps (%)
1.5 1
(%)
1.5 1
Instrument Specifications
TPS-200SA/300k Soft Magnet AC Test Power Supply Output Power: 200 VA sine wave Frequency Range: 1 kHz ~ 500 kHz Frequency Fineness: < 0.1% * Current Value TPS-200SA/500k Soft Magnett AC Power Supply Output Power: 200 VA sine wave (below 300 kHz) Frequency Range: 1 kHz ~ 500 kHz Frequency Fineness: < 0.1% * Current Value
Frequency Error: < 0.05% Output Voltage: 0 ~ 50 V (Peak Value) Voltage Fineness: Program Control 1 mV, panel < 10 mV
Frequency Error: < 0.05% Output Voltage: 0 ~ 50 V (Peak Value) Voltage Fineness: Program Control 1 mV, panel < 10 mV Voltage Distortion Factor: Superior to 1% Voltage Stability: Superior to 0.1% Sampling Current: 0 ~ 5 A (Peak Value) Sample Voltage: 0 ~ 10 V (Peak Value) PC5012 A/D Card Sampling Rate: 50 MHz * 2 Channels Resolution and Linearity: 12 Bits 1/2 LSB Voltage Range: 0.1 V ~ 20 V Sampling Clock: 25 ns ~ 5 ms Hardware Clock Internal Storage Capacity: 4 M Bytes * 2 Bus Structure: PCI busbar
Voltage Distortion Factor: Superior to 1% Voltage Stability: Superior to 0.1% Sampling Current: 0 ~ 5 A (Peak Value) Sample Voltage: 0 ~ 10 V (Peak Value) TPS-500A Broadband Programmable Power supply Output Power: 500 VA sine wave Frequency Range: 10 kHz ~ 100 kHz Frequency Fineness: < 0.1% * Current Value Frequency Error: < 0.05% Output Voltage: 0 ~ 50 V~ 100 V~ 150 V~ 300 V Voltage Fineness: Program Control 1 mV, panel < 10 mV Voltage Distortion Factor: Superior to 1% Voltage Stability: Superior to 0.1% Sampling Current: 0 ~ 10 A (Peak Value) Sample Voltage: 0 ~ 200 V (Peak Value)
System Specifications
Serial No. 1 2 3 4 5 6 Product Name Test Power Supply Data Acquisition Card Measurement Software Computer Printer Standard Specimen Model TPS-200SA PC5012 SMTest Dell Dimension E-520n HP1020 laser printer Ferrite Quantity 1 1 1 1 1 1
An ISO 9001 : 2208 | ISO 14001 : 2008 | ISO 13485 WHO: GMP Products | GLP Compliant Products
SHOWROOM
J-284 Sector 1 Bawana Industrial Estate, Bawana, Delhi, INDIA-110039 Tel.: 0091-0-9312219738 (M) +91- 9717741167 E-mail.: info@acmasindia.com