Documente Academic
Documente Profesional
Documente Cultură
www.t3energy.com
T3 Energy Services
table of contents
T3 Energy Services has full engineering capabilities worldwide, with onshore and offshore operations in North and South America, Mexico, China, and Canada.
Table of Contents
Aftermarket Services_______________________________________ 2-3
Quality:
As it specifically relates to T3 Energys manufacturing process, all processes, employee certification programs, and inspection activities are managed through our ISO 9001 and API Q1-compliant Quality Management Systems (QMS). T3s QMS is based on several different industrial standards and is coupled with performance models to ensure continual monitoring and improvement. All T3 Facilities have a quality management team that is charged with assuring that day-to-day operations are conducted consistently and within the protocols outlined within the corporate QMS. Operational steps are continually monitored and evaluated against customer and industrial requirements. All of T3 Energys management systems were born electronically. All procedures, policies, and specifications are available to every T3 Energy location via a company network supported by an off-site server. Regardless of where your product is serviced, it will be consistently managed to the same safe standards, the same stringent quality requirements, and the same environmentally-friendly practices.
Aftermarket Service
Overview
Organization:
Wellhead & Production Systems (WPS) WPS Specialty is Land and Offshore Based API 6A Valves, Wellheads, Christmas Trees, Drilling and Completion Services. Pipeline Group Pipeline Valve Specialty is Land and Offshore Based API 6D Valves Pressure Control Two sub-units: Pressure and Flow
Drilling Solutions Drilling Products Completion Solutions Completion Products Valves and Chokes
Overview_______________________________________________ 4-25
Delivery_______________________________________________________ Field Installation_ ________________________________________________ Scheduled Maintenance_ _________________________________________ Emergency Maintenance__________________________________________ Repair/Remanufacture_ ___________________________________________ Replacement Parts_ _____________________________________________ Rental Tools____________________________________________________
2 2 3 3 3 3 3
Corporate/Vision Statement_ _______________________________________ 6 Phone Directory_________________________________________________ 8 Safety_ _______________________________________________________ 10 History_______________________________________________________ 11 Guide to Specifying Wellheads_ _________________________________12-17_ Standard to Custom_ ____________________________________________ 18 Custom Engineered_____________________________________________ 19 Custom Approaches_ ___________________________________________ 20 Standard Offerings_ ___________________________________________21-25 Time Saver_ ___________________________________________________ 28 TDS I________________________________________________________ 29 TDS II_ _______________________________________________________ 30
Tubing Heads_ _______________________________________________62-65 Adapters_ __________________________________________________66-77 Tubing Hangers______________________________________________78-81 Crosses & Tees______________________________________________82-83 Tree Caps_ _________________________________________________84-85 Block Trees_ ________________________________________________86-87
1
2009 T3 Energy Services, Inc. All Rights reserved.
Aftermarket Service
Aftermarket Service
Services Offered
Delivery Field Installation Scheduled Maintenance Emergency Maintenance Repair/Remanufacture Replacement Parts Rental Tools
Reliability is gained with planned and preventive maintenance programs. Specialized T3-developed scheduled and preventive maintenance programs are in place and these can be customized to fit your needs, regardless of original manufacturer. T3 has experienced engineers with an established course for optimizing your valve life. Our service team at T3 provides world-class engineering support with our customized program, including proprietary online record retention for reporting your service history. T3 branches are strategically located and many are equipped with full machining and welding capabilities designed to support and augment our customers services and remanufactured product requirements. In-house repairs mean better quality and faster turn around. This commitment encompasses T3 service, repair, remanufacturing to engineering. Whether new products, remanufactured, or repaired equipment, you are assured the same level of commitment and support. All T3 remanufactured products are backed by a new product limited warranty. Elastomers and replacement parts-all items that are part of your scheduled maintenance program are available. At T3, we manufacture and stock replacement parts of all kinds. We have a complete manufacturing facility for custom designs as well as standard elastomers. T3 branches stock a broad range of rental tools and equipment. These include but are not limited to wear bushings, running tools, test plugs, gate valves, frac trees, manifolds, frac isolation systems, lubricators, back pressure valves, two-way check valves, BPV taps, greasing skids, cutting torch and grinders, casing saws, portable generators, trailers with mono-rail systems, portable cellar pumps, and torque wrenches. One-stop shop for equipment, installation and service, no matter who the Original Equipment Manufacturer.
3
2009 T3 Energy Services, Inc. All Rights reserved.
Maintenance:
Remanufacture / Repair:
It is T3s commitment to our customer that field operations extends beyond industry-standard factory inspection. At T3 branch facilities, we not only assemble and test your system and/or product prior to delivery- we track and utilize wellhead assets, too.
T3 Values Product and Field Operational Reliability
Distributed Geographic Footprint Extensive Domestic and International Manufacturing Capacity Continued Growth through Acquisition Expanded Customer Support Team
Replacement Parts:
Our service technicians are fully trained and experienced in wellhead products and services, both installation of T3 equipment and all major brands. Above all, T3 service technicians are trained and knowledgeable in industry practices for safe product handling and equipped to install your equipment safely-whatever the OEM brand. Our goal is to provide world-class seamless service to our customers, from field service to T3 branch service to engineering support. We have proven we are capable of this, and it is evident in our superior safety record.
Installation:
Rental Tools:
T3 Branches:
2
2009 T3 Energy Services, Inc. All Rights reserved.
overview
overview overview
CROWN & TRAVELING BLOCK STANDPIPE MANIFOLD REMOTE CONTROL SYSTEM PANEL MASTER BUSHING WELLHEAD & PRODUCTION TREE PIPELINE VALVES
Drilling Phase
Production Phase
Wellhead Products
Pipeline Products
4
2009 2009 T3 T3 Energy Energy Services, Services, Inc. Inc. All All Rights Rights reserved. reserved.
5
2009 2009 T3 T3 Energy Energy Services, Services, Inc. Inc. All All Rights Rights reserved. reserved.
overview
overview
Industry Licenses API-6A, 6D, 16A, 16C, 16D, 17D NBBI VR QMI ISO 9001:2000 ISO 14001 Environmental Management Program NACE, ASTM and ANSI Industrial Requirements
T3 Wellhead Production Division (WPS) products and services are supported by a customer- driven engineering team with years of engineering experience in production equipment services.
Surface Wellhead Equipment Catalog
6
2009 T3 Energy Services, Inc. All Rights reserved.
7
2009 T3 Energy Services, Inc. All Rights reserved.
overview
WPS Products
Tubing Heads, Hangers Adapters for Single and Multi-string Completions TimeSaver Wellhead Systems Lockdown Screws Reducer Bushings Elastomer and Metal Seals Various Christmas Tree Accessories Casing Heads, Casing Spools, Casing Hangers API 6A Gate Valves Multi-Trim Chokes Actuators and Safety Systems Custom Coatings
WPS Services
Rental equipment such as casing saws, greasing skids, cutting torches and lubricators Machinists and Welders on 24HR, ON CALL for emergency situations Troubleshooting, maintenance and repair Various rental tools, portable cellar pumps, generators and torque wrenches Installation and service of Surface Safety Systems Replacement/stock of Wellhead parts Full array of Service tools Transportation
Aftermarket Service Drilling Solutions Drilling Products Completion Solutions Completion Products Valves and Chokes
We know your needs are changing. You require products and services that are cost effective and reliable. You want the latest time saving applications, the best technology, and you want a company that has a great safety record. For these reasons, weve shaped our offerings to reflect your needs. Were launching cutting edge time saving wellhead solutions. Whether your requirements are simple or one of T3s solutions-based designs, we have systems designed to lower your total installation costs and maximize your production. You can use us for all of your conventional wellhead needs. T3 WPS maintains a strategically distributed inventory from standarized product lines. Simplify everything and use T3 for all of your needs. T3 WPS is committed to continuous improvement to shape industry needs and improve your experience with T3 Wellhead & Production Systems.
Phone Directory
Corporate Office 713-996-4110 Alvarado 682-518-7805 Broussard 337-839-0070 Conway 501-505-8816 Grand Junction 970-243-6870 Houston 713-440-3170 Houston WPS Office 713-375-3070 Houston WPS Fax 713-375-3050 Indiana 724-465-6480 Surface Wellhead Equipment Catalog Longview 903-234-0233 Odessa 432-552-0695 Oklahoma City 405-677-8051 Perryton 806-435-1122 Robstown 361-387-2843 Shreveport 318-424-4700 Fort Nelson, BC Canada 250-233-8300 Dubai U.A.E. 97-14-885-1300 Mexico 011-52-937-372-4071
8
2009 T3 Energy Services, Inc. All Rights reserved.
9
2009 T3 Energy Services, Inc. All Rights reserved.
overview
overview
History of T3 Energy
2000 2001 2002 2003 2004 2005 2006 2007 2008 2009
1999 First Reserve Corporation Forms T3 Energy Services (T3) Year 2000 T3 major acquisitions: Cor-Val (Houma, LA) Preferred Industries (Houma, LA) United Wellhead (Robstown, TX) In 2001,
smaller acquisitions were made as T3 merged with Manifold Valve of Jennings, LA. API 6D product lines were gained with purchase of Pipeline Valve (PVS), and Custom Coating Applicators-both of Houston, TX becoming a part of the T3 family. New products included Model 6012 Ram BOP, and Annular BOP Models 7012, 7022, 7082.
2005
T3 repair and service center was opened in Cardenas, Mexico expanding marketing and sales efforts in Mexico. roduct introductions: P Model 6011i Ram Blowout Preventer Model 6000 Shear Blind Ram Blocks Model 6031 Ram Blowout Preventer Model WS2 Drilling and Well Service Choke
2004
Acquisitions went International with the purchase of Oilco of Nisku, Canada. This acquisition expanded product lines into other geographical markets and customers. T3 became a manufacturer of rubber goods with the purchase of Alberta Rubber Products, Inc. of Canada. New product introductions included Model CVC1ME Electric Actuated Production Choke, Model CVC4MEA Hydraulic Stepping Actuated Production Choke, and Model T3 Drilling Choke. T3 manufactures rubber goods used in oilwell flow control, seals for BOPs and casing/tubing hangers.
2006
T3 acquired KC Machine of Rock Springs, WY This acquisition continued T3s expansion of its pressure and flow control, wellhead and pipeline products and services to those customers located in the Rocky Mountain Region. New products include Model 6012R BOP, and Model 6012W Ram Blocks with wear pads.
2007
T3 acquired Energy Equipment Corporation (EEC) of Houston, TX with new valve and wellhead products for surface and subsea drilling and production.
2008
T3 continues expansion into Oklahoma City, OK and Grand Junction, Colorado with Pinnacle Wellhead.
6 5 4 3 2 1 0
Industrial Average
2009
Annual T3 Energy TRIR 2009 T3 Energy Goal 2006 2007 2008 2009 YTD
T3 acquired Azura Energy Systems Surface Wellhead business providing additional geographic locations in key markets and allowing consolidation of several facilities where both companies are presently located.
10
2009 T3 Energy Services, Inc. All Rights reserved.
11
2009 T3 Energy Services, Inc. All Rights reserved.
overview
overview
01
Standard Stainless
V 35 to 250 R -40 to 120 Temperature Class (F) X 0 to 350 S 0 to 150 K -75 to 180 Y 0 to 650 T 0 to 180 L -50 to 180 U 0 to 250 P -20 to 180 Material Class: Minimum Material Requirements: AA-Standard Trim API Material Class: AA-General Service Carbon or Low alloy Steel Standard Trim - No H2S or CO2 - Non-Corrosive Body, Bonnet, End and Outlet Temperature Range: 0F to 250 F Connections as well as Pressure Controlling Parts, stems and Mandrel Hangers BB-Stainless Trim API Material Class: BB - General Service Stainless Trim - No H2S, Slight CO2 - Mildly Corrosive When Partial Pressure(5) of CO2 is between 7 and 30 Temperature Range: 0F to 250F CC-Full Stainless Trim API Material Class: CC-General Service Full Stainless Trim - No H2S, High CO2 When Partial Pressure(5) of CO2 is Greater than 30 Temperature Range: 0F to 250F DD-Sour, Non-Corrosive API Material Class: DD-Sour Service(1) Slight H2S, No CO2 Temperature Range: 0F to 250F EE-Slightly Corrosive API Material Class: EE-Sour Service(1) Sour Gas and Oil. H2S, Slight CO2 Where Resistance to Hydrogen Sulfide Embrittlement is Required When CO2 is Present in Smaller Amounts than H2S Temperature Range: 0F to 250F Carbon or Low Alloy Steel Body, Bonnet, End and Outlet Connections, Stainless Steel Pressure Controlling Parts, Stems and Mandrel Hangers Stainless Steel Body, Bonnet, End and Outlet Connections as well as Pressure Controlling Parts, Stems and Mandrel Hangers Carbon or Low Alloy Steel(2) Body, Bonnet, End and Outlet Connections as well as Pressure Controlling Parts, Stems and Mandrel Hangers Carbon or Low Alloy Steel(2) Body, Bonnet, End and Outlet(2) Connection, Stainless Steel Pressure Controlling Parts, Stems and Mandrel Hangers.
Surface Casing
Intermediate Casing
Liners
Production Casing and Tie Back Strings Material Class: Minimum Material Requirements: FF-Sour Service per NACE Stainless Steel (2) (1) API Material Class: FF-Sour Service Body, Bonnet, End and Outlet Sour Gas and Oil - H2S, High CO2 (1) Connections as well as Where CO2 content exceeds H2S Content Pressure Controlling Parts, When Resistance to H2S Embrittlement is Required Stems and Mandrel Hangers (3) Temperature Range: 0F to 250 F HH-CRA Sour and Corrosive Service API Material Class: HH - Sour Service Sour gas and Oil CRAs High Alloy, Inconel or CLAD.
Nace CRA
Salt Water
Production Tubing
Salt Water CRAs Salt Water / Waterflood (Uninhibited) Metal-to-metal areas are CLAD (4) Where Untreated or Uninhibited Brackish Provides resistance to corrosion Saline Water Exists All other wet areas are internally Oilfield Waterflood Projects and/or Disposal Wells. coated. Internal Parts are Resistant to Sulfide Embrittlement and Corrosion. Temperature Range: 0F to 250 F
235 Brinell (4) Inconel 625 Cladding (5) Partial Pressure= {% of H2S or CO2=100}x Shut-in Pressure
Notes: (1) As defined by NACE Standard MR0175. (2) In compliance with NACE Standard MR0175 (3) NACE- Tubing/Mandrel hangers: 4130 HT (Heat Treated), Q&T, 207-
235 Brinell (4) Inconel 625 Cladding (5) Partial Pressure= {% of H2S or CO2=100}x Shut-in Pressure
Notes: (1) As defined by NACE Standard MR0175. (2) In compliance with NACE Standard MR0175 (3) NACE- Tubing/Mandrel hangers: 4130 HT (Heat Treated), Q&T, 207-
12
2009 T3 Energy Services, Inc. All Rights reserved.
13
2009 T3 Energy Services, Inc. All Rights reserved.
overview
overview
Section A
Safety Valve Upper Master Valve Lower Master Valve Tubing Head Adapter
Cross
Features:
Christmas Tree
Tubing Hanger
A5P Tubing Head Adapter with TC-1A-EN Tubing Hanger TCM Tubing Head with LDS Actuated Gate Valves Multi-trim (MLT) Chokes Casing Spool, T3-22 or T3-29 Casing Head, T3-22 or T3-29
02 Casing Head Model: Select a T3 model, connection type, size. Example: SOW x size Flange -WP top connection PSL - & PR-level, material class, temperature range; with/without bowl protector pins; quantity and side-outlet type. Refer to Drilling Products section for selections. 03- Side Outlet Valve: Select a T3 Valve Model; API-WP, PSL-and PR-level; quantity Refer to Valve section for available sizes. Selection of side outlet valve type will determine VR-Plug thread prep. 04- End Fittings: Select end fittings. Specify which side end fittings will be installed. (ie., blind Flange on the right or left hand side.)
Casing Head Models: C-22 or C-29 Lockdown Screws (-L) Bowl Protector Pins (-BP) EFO (extended flange outlet) LPO (line pipe outlet) Connection (bottom): SOW (slip-on weld) Weldless 8rd (male or female) T3 Valve Models: Flanged Gate Valve Threaded Gate Valve Threaded Ball Valve Availability: LP (line Pipe) API 8rd threaded
LDS
Wellhead
05 Casing Hanger: Slip type. Casing Hanger Models: Note: C-21 Hangers are not designed for use in Casing C-21 with H ring Heads or Casing Spools that have lockdown screws. C-22 See the T3 Casing Hanger compatibility chart, C-29 available in the Drilling Products section for sizes.
Reducer Bushing Slip Hanger, C-22 or C-29 Valve Removal (VR) Plug Casing Spool Casing Head Bowl Protector Pins Bull Plug Base Plate
Section B
06 Casing Spool Selection: Casing Spool Models: T3 top connection is API flanged. C-22 with CS Seals Studded Side outlets (SSO), extended flanged outlet (EFO) C-29 with CS Seals Line Pipe (LP), or API 8rd threaded Lockdown Screws (-L) Refer to Drilling Products section for sizes and pressures Bowl Protector Pins (-BP) 07 Side Outlet Valve: Select a T3 Valve Model; T3 Valve Models: API-WP, PSL - and PR level; quantity Flanged Gate Valve Refer to Valve section for available sizes. Threaded Gate Valve Selection of side outlet valve type will Threaded Ball Valve determine VR-Plug thread prep. 08 End Fittings Availability: Specify which side end fittings will be installed. LP (Line Pipe) (ie., Blind Flange on the right or left hand side.) API 8rd threaded Weldneck 09 Casing Hanger: Slip-type Casing Hanger Models: Note: C-21 Hangers are not designed for use in Casing C-21 with H ring Heads or Casing Spools that have lockdown screws C-22 See the T3 Casing HAnger compatibility chart, C-29 available in the Drilling Products section for sizes. 10 Stack Spools of the Same Selection Type: Two or more spools may be stacked of the same selection type.
14
2009 T3 Energy Services, Inc. All Rights reserved.
15
2009 T3 Energy Services, Inc. All Rights reserved.
overview
overview
T3 Technology
The T3 Surface Wellhead Product Line Equation Traditional Technology Plus Customer-Driven Solutions
Section C
Model TC-60 Dual: CS Seal rated up to 15,000 psi T3 TimeSaver Wellheads are compatible with TCM and TC-60 Refer to Tubing Heads section for sizes and pressures
Our company is proud to be recognized for its history of technological innovation and its reputation for custom-engineered drilling and completion wellhead systems. But thats only a small window into the portal of T3 Surface Wellhead Systems.
12 Side Outlet Valve: Connection type and Valve Model; API-WP, PSL- & PR- level; quantity Refer to Valve section for sizes. Selection of side outlet valve type will determine VR-threaaad prep. Specify which side end fittings will be installed. (ie., Blind Flange on the right side or left hand side) 13 Tubing Hanger Selection: Note: T3 recommends TC-1A-EN-M2M metal-to-metal tubing hangers in corrosive environments and in pressures at or above 15,000 psi Select the appropriate downhole control line(s) for yout application. A continuous control line external termination is recommended. Select BO-2 or BO-10 if tubing string manipulation with annular pressure containment is a requirement
T3 Valve Models: Flanged Gate Valve Threaded Gate Valve Threaded Ball Valve LP (line pipe) API 8rd threaded Note: 9/16 in. OD tube - high pressure (15,000 psi and greater) Tubing Hanger Models: TC-1A-EN TC-1A-EN-M2M TC-60 Dual TC-DC Dual Alternatives: B-1 B-2P BO-2 Hanger Coupling BO-10 Hanger Coupling
Surface Wellhead at T3 means applying the standard conventional wisdom of the past with todays needs for engineered products. Above all, T3 Surface Wellheads focus is on your needs and supplying them in a short period of time with value added solutions. For many years the best choice for budget and risk parameters was a standard flanged low pressure API wellhead.
However, in todays ever changing environment, solutions need to be all encompassing. For our customers, this range of solutions translates into convenience. Relying on one source will simplify everything for you. Depend on T3 Surface Wellhead to supply your application needs, no matter what or where they are, or however routine and challenging.
For deep, critical service wells, reliability is the driver; a custom-engineered project approach may be the best solution. As well location, depth, pressures, number of completions and other factors complicate the scope of your project, T3 can design a custom-engineered approach to your wellhead. T3 Surface Wellhead is here with a solution that optimizes performance and minimizes your total well cost.
14 Adapter Selection: Models: Note: Each hanger has a corresponding adapter. A5P Adapter: Every adapter corresponds with DHCL options TC-1A-EN Hanger selected in the tubing hanger A5P-M2M Hanger Refer to Adapters section for sizes and pressures TC-1A-EN-M2M Hanger Note: The TC-1W (wrap around) Packoff is Dual Adapters: used with Alternative Adapters to allow tubing TC-60 Dual string manipulation while maintaining annular pressures. TC-D2C Dual 15 Additional Details: Industry standard tests are performed for temperature and pressure in our facilities Surface Wellhead Equipment Catalog
16
2009 T3 Energy Services, Inc. All Rights reserved.
17
2009 T3 Energy Services, Inc. All Rights reserved.
overview
overview
Standard to Custom
The T3 Surface Wellhead Product Line: Low Pressure Wellheads to High Pressure Oil & Gas Wellheads
Custom Engineered
The T3 Surface Wellhead Thru-Diverter Systems and Downhole Deployment Valve (DDV) option.
Drilling Phase
Shale plays are the emerging giant of the petroleum industry. Over the last 20 years, production from oil shales has doubled. Product Development for recovering this resource is among one of T3 Advanced Engineerings top priorities.
Wellhead Products
TDS I
(formerly Oilco) of Canada - world renown for its seal technology - gives our customers a unique advantage. These rubber goods and metal-tometal seals for casing/tubing hangers, valves and chokes are used in our TimeSaver systems. TDS-1 Thru Diverter System uses a conventional slip-type casing hanger as primary means for hanging casing during drilling operations. The Diverter Attachment Assembly moves with the rig, reducing inherent dangers involved while working under the Diverter/BOP stack.
TDS II
TDS-2 combines the features of TDS-1 Thru Diverter System with the TimeSaver-2 Unitized Wellhead. The Diverter Attachment Assembly can land multiple casing strings with speed - installation and removal with Slip-nLock weldless connection. Depending upon which design is selected, DDV porting.
Among the knowledge base are engineers from several of the largest wellhead service providers. Those familiar with oil/shale deposits in the world, who have already led to the creation of unique advanced technologies, and a highly skilled workforce. With this solid foundation, the product development team at T3 Wellhead and Production Systems is moving forward with drilling products designed for rigorous demands. The technologies which obtain oil and gas from shale reserves means energy producers require more flexibility and time savers for oil extraction than the more traditional oil production services. These processes require full API compliance as well as rugged and reliable T3 industrial wellheads. T3 manufactures several TimeSaver Wellhead Systems that meet those requirements. Many applications also require abrasion resistant sealing components. Here our ownership of T3 Elastomers
A fluted mandrel hanger is the primary means for hanging casing. T3 offers four options to allow cement returns to the surface, DDV prep. available. Emergency Equipment: A conventional slip-type casing hanger and packoff support bushing.
Custom coatings are also provided in-house at T3 for various wellhead products, valves and chokes per industry requirements. Special interior surface coatings for corrosive/ severe service is made available in-house at T3.
18
2009 T3 Energy Services, Inc. All Rights reserved.
19
2009 T3 Energy Services, Inc. All Rights reserved.
overview
overview
Custom Approaches
The T3 Dual Block Valve: Two integrated vertical bores for production of oil & gas in a single unit.
Standard Offerings
The T3 Single Completion: A single vertical bore for production of oil & gas, or water wells
Production Phase
Wellhead Products
Applications: Vertical or Horizontal Wells Short Radius, Sidetracks and Multi-lateral Completions Water Source Wells Frac and Pack Completions
TC-DC
TC-60
Thru-Tubing Completions
20
2009 T3 Energy Services, Inc. All Rights reserved.
21
2009 T3 Energy Services, Inc. All Rights reserved.
overview
overview
Standard Offerings
The T3 ESP Completion
Standard Offerings
The T3 Mini Tubing Spool Completion.
MT S Completion
Applications: Vertical or Horizontal Wells Short Radius, Sidetracks and Multi-lateral Completions Frac and Pack Completions Advantages: Accommodates Smaller Diameter Frac Stack Big Cost Savings, snub / suspend
22
2009 T3 Energy Services, Inc. All Rights reserved.
23
2009 T3 Energy Services, Inc. All Rights reserved.
overview
overview
Standard Offerings
The T3 FCS.
Standard Offerings
Tubing String Reciprocation Completion
BO-2 Completion
Traditional Cost Effective Wellhead Systems
Applications: Vertical or Horizontal Wells Short Radius, Sidetracks and Multi-lateral Completions Water Source Wells Frac and Pack Completions
Reducer Bushings
Thru-Tubing Completions
Test Port
Casing
24
2009 T3 Energy Services, Inc. All Rights reserved.
25
2009 T3 Energy Services, Inc. All Rights reserved.
drilling Solutions
drilling Solutions
26
2009 T3 Energy Services, Inc. All Rights reserved.
27
2009 T3 Energy Services, Inc. All Rights reserved.
drilling solutions
drilling solutions
T3 Time Saver
TDS I
Benefits:
TS-3 TimeSaver Assembly is assembled and tested at the service center, cutting installation time by half.
Features:
Standard Apapter Standard Tubing Spool Upper Mandrel Packoff Mandrel Casing Hanger
Applications:
Batch Drilling, Fast BOP Nipple-up, Offline testing.
Standard Equipment
API Flanged Casing Heads, Slip-type Casing Hangers.
Benefits:
TDS-1 Thru Diverter System Cementing operations can start immediately because the T3 TDS casing head is run through the diverter on the surface casing. Operations can continue with removal of diverter and installation of the BOP adapter for drill-out of production casing.
Features
Weldless System with pre-installed casing pipe. BOP adapter remanins nippled-up to BOP allowing offline pressure testing of BOPs and fast BOP nipple-up. T3 Frac Isolation System compatible. Make-up of Landing Ring and TDS Casing Head running tool together, (moves with the rig).
or Slip-type TS-3 Casing Spool Lower Mandrel Packoff Casing Head Special Bowl Pins and Seals
Standard Equipment:
Upper Mandrel Hanger
Emergency Equipment:
Upper Emergency Slip Hanger, C-22 or C-29 Packoff Support Bushing
Install TDS BOP adapter to the TDS Casing Head ASsembly BOP stack. Adapter stays on the stack and moves with the rig.
.
Run-in standard T3 combination BOP test plug and wear bushing running and retrieval Support Ring Landing Ring for Diverter to Overshot Casing No third-party rental tools required. tool.
TimeSaver Assembly
Mandrel Hanger
Cellar
Options
DDV porting Adaptable to Single and Multi-String Completions
Surface Wellhead Equipment Catalog
Tubing
28
2009 T3 Energy Services, Inc. All Rights reserved.
29
2009 T3 Energy Services, Inc. All Rights reserved.
drilling solutions
drilling solutions
Benefits:
TDS-2 Thru Diverter System Casing head and diverter are one assembly, with emergency equipment design, similar to TS2.
TDS II
Features:
Many of the same features as the T3 TDS-1 System, Weldless Systwm with pre-installed casing pipe.
Emergency Equipment:
Upper Emergency Slip Hanger, C-21, C-22 or C-29 Packoff Support Bushing
T3 Energy Surface Wellhead Systems has all the drilling solutions for your project needs.
TDS Casing Head Assembly Support Ring Landing Ring for Diverter to Overshot Casing
Conductor
Cellar
Applications:
Batch Drilling, Fast BOP Nipple-up, Offline testing.
Options:
DDV porting Adaptable to Single and Multi-String Completions
30
2009 T3 Energy Services, Inc. All Rights reserved.
31
2009 T3 Energy Services, Inc. All Rights reserved.
drilling products
drilling products
T3 Energy Surface Wellhead Systems has all the traditional drilling products for your project needs.
Surface Wellhead Equipment Catalog
32
2009 T3 Energy Services, Inc. All Rights reserved.
33
2009 T3 Energy Services, Inc. All Rights reserved.
drilling products
drilling products
Tubing Head
Casing Spool
Reducer Busing
Bit Guide with Seal
Casing Hanger
-L with "H"-Ring with Automatic Seal
Casing Head
with SSO
-L with SSO
with SSO
-L with SSO
Base Plate
34
2009 T3 Energy Services, Inc. All Rights reserved.
35
2009 T3 Energy Services, Inc. All Rights reserved.
drilling products
drilling products
Casing Heads
Casing Heads
45
C-29
A WP (psi)
B Height/ Length
C Bowl ID
7.00 7.00 7.00 8 3/4 8 3/4 8 3/4 8 3/4 8 3/4 10 7/8 10 7/8 10 7/8 10 7/8 10 7/8 10 7/8 10 7/8 10 7/8 10 7/8 13 1/2 13 1/2 13 1/2 13 1/2 13 1/2 13 1/2 16 5/8 16 5/8 16 5/8 20 1/8 20 1/8
Size, (in.)
7 1/16 7 1/16 7 1/16 9 9 9 9 9 11 11 11 11 11 11 11 11 11 13 5/8 13 5/8 13 5/8 13 5/8 13 5/8 13 5/8 16 3/4 16 3/4 16 3/4 21 1/4 20 3/4
C-22
Bowl Depth
C-29
Bowl Depth Approx. (Lbs.)
275 264 254 210 240 180 240 270 340 460 660 320 430 680 300 410 590 470 585 1510 380 500 1430 980 995 1560 1210 1330
2000 3000 5000 2000 3000 2000 3000 5000 2000 3000 5000 2000 3000 5000 2000 3000 5000 2000 3000 5000 2000 5000 2000 3000 5000 2000 3000 15 15 7/8 13 7/8 15 7/8 15 7/8 15 7/8 16 1/2 18 3/4 16 3/4 16 3/4 16 3/4 15 3/4 16 3/4 16 3/4 17 3/8 17 3/8 17 3/8 15 18 1/2 18 1/8 18 1/8 18 1/8 29 1/2 21 3/4
7.12 7.12 7.12 6.52 6.52 6.52 6.52 6.52 6.52 6.52 6.52 6.52 6.52 6.52 6.52 6.52 6.52 6.52 6.52 6.52 6.52 6.52 6.52 8.50 8.50 8.50 8.50 8.50 10.02 10.02 10.02 10.02 10.02 10.02 10.02 10.02 10.02 10.02 10.02 10.02 10.02 10.02 10.02
Functions
Allows testing and support for a BOP system during drilling out for the next casing string Provides the attachment / sealing point to surface equipment Ported to allow for pressure testing of the casing head slip-on weld Casing hanger retention with optical lockdown screws in top flange Provides for annular access and monitoring through studded side outlets (SSO) Provides landing and retention of a T3 bowl protector or test plug
C-22 Bowl
Features Straight bowl profile, industry standard design, multiple side outlet options API 6A compliant for material, temperature, PSL; Meets PR-1 test requirements Bottom connections may be male-threaded, female-threaded, slip-on weld, or weldless When required, a welded baseplate may be used Benefits Straight bowl with load shoulder can support bowl protectors, casing hangers and test plugs Standard designinterchangeable within the wellhead industry, added savings are made with standardization Versatile top connection, may be flanged, bowl pinned, or have retractable lockdown screws
3000 16 1/16
C-29 Bowl
Features Many of the same features as C22 design except for a deeper bowl Compliant for use in higher pressures and extreme loads Benefits Deeper bowl accepts other T3 wellhead casing hangers; designed for heavier casing loads
36
2009 T3 Energy Services, Inc. All Rights reserved.
37
2009 T3 Energy Services, Inc. All Rights reserved.
drilling products
drilling products
Slip-n-Lock
Slip-n-Lock is a TimeSaver and this combination casing head connection/hanger can easily be installed thus saving valuable rig time.
-L with SSO
EFO LPO
Slip-n-Lock
-L Slip-n-Lock
-L with SSO
EFO LPO
Specify: Model C-22 or C-29 Slip-n-Lock Options: Lockdown Screws (-L) Bowl Protector Pins (-BP) Outlet: SSO (studded side outlet) EFO (extended flange outlet) LPO (line pipe outlet) Surface Wellhead Equipment Catalog
Service: General, H2S, CO2, Salt Water. TimeSaver Options: Custom Diverter Head Attachment, with or without DDV porting. Specify API requirements for PSL, Temperature and Material Class.
38
2009 T3 Energy Services, Inc. All Rights reserved.
39
2009 T3 Energy Services, Inc. All Rights reserved.
drilling Products
drilling products
CASING HANGERS
Flange x Casing Size (in.) Size (in.) 9 9 9 11 11 11 11 11 11 13 5/8 13 5/8
Casing Hangers
4 1/2 5 5 1/2 4 1/2 5 5 1/2 6 5/8 7 7 5/8 4 1/2 5 1/2 7 7 5/8 8 5/8 9 5/8 10 3/4 x x x x x x x x x x x x x
x x x x x x x x x x x x x x x x x x
x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x
Casing Hangers
with H-ring Slip-type Casing Hanger with H-ring Features: C-21 is the standard for hanging light to medium casing loads A set of wedging slips energized by casing weight; can support 80% of the casing joint strength Slips wrap around and bolt into place; no loose parts to fall into the well May be used only in heads or spools with no lockdown pins or bowl pins H-ring H-ring with elastomer seal is positioned above the hanger for annular seal The H-ring is temperature range rated at -20 to 250 F Seals used in H-rings are: CS-seal on the ID; S-seal on the OD Benefits: Can be lowered and set through the BOP and riser system before or after cementing T3 Wellhead H-ring packoff seals are more reliable than O-rings Compatible with full API tolerance range for casing OD Available in full range of casing OD sizes Suits most casing loads Surface Wellhead Equipment Catalog
Casing Hanger with Automatic Sealing Features: C-22 casing hanger is standard design for suspending medium casing loads May be used in heads or spools with lockdown pins or bowl pins (BP) Includes a set of wedging slip segments energized by casing weight Packoff temperature range rated at -50 deg. to 180 deg. F Can support 80% of the casing joint strength Benefits: Packoff is automatically energized by casing weight Compatible with full API tolerance range for casing OD Available in full range of casing OD sizes
Casing Hanger with Automatic Sealing Features and Benefits Has many of the same features and benefits as C-22, designed for higher casing loads
13 5/8 13 5/8 13 5/8 13 5/8 13 5/8 16 3/4 16 3/4 16 3/4 16 3/4 18 3/4 20 3/4 20 3/4 20 3/4 20 3/4 20 3/4 21 1/4 21 1/4 21 1/4 21 1/4 21 1/4 26 3/4 Note:
9 5/8 10 3/4 11 3/4 13 3/8 13 3/8 9 5/8 10 3/4 11 3/4 13 3/8 16 9 5/8 10 3/4 1 3/4 13 3/8 16 18 5/8
x x x x x x x x x x x x x x x x x x x x x x x
Hangers are not designed for use in casing heads or spools that have lockdown screws.
Specify: Model
Options:
Casing size, weight and grade API requirements for PSL, Temperature, and Material Class. Surface Wellhead Equipment Catalog
40
2009 T3 Energy Services, Inc. All Rights reserved.
41
2009 T3 Energy Services, Inc. All Rights reserved.
drilling products
drilling products
Casing Spools
T3 Casing Spools are a straight bore, industry standard design, available in two models.
B
45 deg. load shoulder C-29 Bowl Depth is greater.
C-29 C-22
Casing Spools
Casing Spools
Dimensions (in.)
C Min. Through Bore 10.02 10.02 10.02 10.02 12.52 12.52 12.52 12.52 15.39 15.39 19.20 19.20 19.20 C-22 Top Bowl Depth 6.52 6.52 6.52 6.52 6.52 6.52 6.52 6.52 8.52 8.52 8.52 8.52 8.52 C-29 Top Bowl Depth 10.02 10.02 10.02 10.02 10.02 10.02 10.02 10.02 10.00 10.00 9.50 9.50 9.50
C
Functions: Supports C-21, C-22, C-29 industry standard casing hangers Provides annular access through studded side outlets (SSO) Retains bowl protectors/bit guides during drilling Supports the BOP during drilling operations
Size (in.) 11 11 11 11
Size (in.) 11 11 11 11
WP (psi) 3000 5000 5000 10000 3000 5000 5000 3000 5000 3000 5000 2000
Features Straight bowl profile API 6A compliant for material, temperature, PSL; Meets PR-1 test requirements Bottom connections are flanged / studded with CS Seal Studded side outlets (SSO) that accept valve removal plugs (optional LP threaded) Models -L have retractable lockdown screws Models -BP have retractable bowl protector pins Benefits Interchangeable within wellhead industry casing spools and most widely used hanger designs Compatible with standard wear bushings, test plugs and running tools Straight bowl prevents wedge-locking of bowl protectors, casing hangers and test plugs
3000 13 5/8 3000 13 5/8 5000 13 5/8 3000 16 3/4 3000 16 3/4 3000 20 3/4 5000 21 1/4 2000 21 1/4
Features Many of the same features as C-22 Casing Spools Made for greater casing loads, has a deeper bowl Benefits Many of the same benefits as C-22 Casing Spools Standardization within the industry ensures efficiency, increased safety, reduced overall costs Surface Wellhead Equipment Catalog
42
2009 T3 Energy Services, Inc. All Rights reserved.
43
2009 T3 Energy Services, Inc. All Rights reserved.
drilling products
drilling products
Mandrel Hangers
Drill-thru Mandrel Hanger
Mandrel Hangers
T3 TimeSaver wellhead utilizes a mandrel hanger as the primary means for hanging casing. One packoff is used for both mandrel and emergency hangers providing a gas-tight seal.
Externally threaded with stub ACME threads; internal threads to suspend casing.
Benefits Allows cement returns through drill-thru ports to the surface BOP stack Can be modified upon request per application Larger fluted ports allow greater cement returns to the surface BOP stack Can be modified upon request for DDV operations
Maddrel Hangers
Note: Slip-type Casing Hangers are available in all sizes and models for emergency hangers
OPtions
Drill-thru
Fluted
Fluted Mandrel Hanger with Downhole Deployment Valve (DDV) Porting and Alignment Pin prep.
Options: Porting for downhole deployment valve operations (DDV prep.) API requirements for PSL, Temperature, and Material Class
44
2009 T3 Energy Services, Inc. All Rights reserved.
13 5/8
45
2009 T3 Energy Services, Inc. All Rights reserved.
drilling products
drilling products
J-Slot Running and Retrieval Tool for Packoff Support Bushing and Mandrel Casing Hanger Combination Test Plug, Running and Retrieval Tool for Wear Bushings
Packoff Support Bushing Bowl Protector / Wear Bushing for Upper Wellhead Assembly
Specify: T3 Seal Bushing requirements per your Casing Program Standard Sizes: 7 in. 7-5/8 in. 8-5/8 in. 9-5/8 in. Surface Wellhead Equipment Catalog
Service: General, H2S, CO2, Salt Water. Options: Bushing can be modified for special applications. API requirements for PSL, Temperature, and Material Class.
46
2009 T3 Energy Services, Inc. All Rights reserved.
drilling products
drilling products
Seal Technology
T3 Energy Systems designs, manufactures, and supplies elastomer and metal seals from our stateof-the-art facility in Canada. Designs are for drilling applications, completion applications and wellhead equipment replacement parts. All seals meet stringent design acceptance criteria. Oilfield elastomers must be reliable for low-pressure, general service or critical-service wells. T3 has developed special compounds and designs for situations that require increased service life and efficiencies. S-Seal
Elastomer Seals
The S-Seal is an interference-type seal utilizing metal coil springs molded integral to the seal corners as anti-extrusion device. The S-Seal is used where there is a machined gap between the sealing bore and shaft (i.e., tubing hanger neck and tubing head adapter bore). There are both OD and ID applications for the S-Seal.
CS-Seal
The CS-Seal is an interference seal used to bridge large extrusion gaps associated with sealing rough mill casing (up to 30 in. pipe).
Elastomer Selection -50 to 250 F -20 to 280 F Low Temp. Nitrile LT NBR Low Temperature HNBR LT, HNBR Each elastomeric material may be used in H2S, CO2, or sweet service.
Application: S Seals are: Reliable between machined components where O ring seals may be inadequate. Used in Drilling, Integral to T3 standard Bit Guide/Reducer Bushings. Used as O.D. and I.D. seals Up to 15,000 psi WP
he conventional O-ring seal is very limited in its ability to bridge large extrusion gaps and remain intact
0 to 350 F HNBR
tested to cover a wide range of pressure and temperature applications and service.
without some kind of anti-extrusion device. T3 has a solution for this situation. T3 seals are designed and
The following key design features have been incorporated into All T3 Seal Designs:
T3 proprietary elastomeric compounds are utilized, rated for all API material classes, including HH which may be used in H2S, or CO2 service; amine resistant. Elements within the seals including anti-extrusion components are continuous.
Seals
Anti-extrusion devices are integrally molded into the seal element, making them easier to install and more durable. Proper squeeze, volume fill and stretch under all API/T3 tolerance conditions, (i.e., the largest diametric gap possible and the worst-case misalignment of sealing surfaces.
Used (single or dual) as a seal in tubing and casing hangers. Up to 15,000 psi WP
48
2009 T3 Energy Services, Inc. All Rights reserved.
49
2009 T3 Energy Services, Inc. All Rights reserved.
drilling products
drilling products
M2M
Reducer Bushings
Features: Bit Guide machined into top for drilling Supplied with FS seals; for standard casing sizes May be used in Tubing Spools or Casing Spools Benefits: Acts as a Secondary Seal Isolates the lower flange during fracturing operations Compatible with T3 TimeSaver and Unitized Wellhead Protects the casing during drilling and downhole operations
Casing
Sizes 4 1/2 5 4 1/2 5 5 1/2 7 7 5/8 8 5/8 9 5/8 8 5/8 9 5/8 10 3/4 11 3/4
Reducer Bushings
Spool OD Reducer Bushing O.D. 7 7 9 5/8 9 5/8 9 5/8 9 5/8 9 5/8 10 3/4 10 3/4 13 3/8 13 3/8 13 3/8 13 3/8 4.00 4.50 4.00 4.50 5.00 6.39 6.76 8.00 9.00 8.00 9.00 10.00 11.00 11 11 11 11 11 11 11 13 5/8 14 5/8 15 5/8 16 5/8 Thru Bore
Metal Seals
T3 Energy Systems patented metal seal design has addressed many issues traditionally associated with metal seals today, a technological breakthrough for wellhead equipment. T3 Energy Systems metal seals are rugged enough for oilfield operation, have simple installation procedures, easily tested after installed and are reusable in most cases. In most applications T3 Energy Systems metal seals are self-energizing and do not rely on a wedging action, suspended weight or flange make-up force to affect a seal.
Reducer Bushings
Rated for all API material classes, including HH which may be used in H2S, or CO2 service; amine resistant. Can be made from almost any high-strength steel or corrosion-resistant alloy. Used on machined surfaces such as tubing hanger neck to tubing head adapters. Made for applications where long life is a requirement (15,000 psi +). Specify: Reducer Bushing / Secondary Seal Casing Size: Chart has standard available sizes.
Notes: 1. X-over bushing may be required for 7 in. casing sizes. 2. Standard spool supplied. 3. Special case; need to machine up to 10 3/4 for bushing to 8 5/8
50
2009 T3 Energy Services, Inc. All Rights reserved.
51
2009 T3 Energy Services, Inc. All Rights reserved.
completion solutions
Completion solutions
T3 Energy Surface Wellhead Systems has all the traditional completion solutions for your project needs.
Surface Wellhead Equipment Catalog
52
2009 T3 Energy Services, Inc. All Rights reserved.
53
2009 T3 Energy Services, Inc. All Rights reserved.
completion solutions
Completion Solutions
Benefits
T3 DC Dual Completion allows tubing string intervention, with T3 TC-DC custom designed rotating flange adapter .
Features
Rotating Flange Adapter TMC Tubing Head TC-DC Tubing Hanger Dual Block Gate Valves Dual Manifold Cross T3 Bowl Pins and Seals
Develop a Joint Venture with T3 Energys Surface Wellhead Systems for that total package you require for completions.
Surface Wellhead Equipment Catalog
Couplings
54
2009 T3 Energy Services, Inc. All Rights reserved.
55
2009 T3 Energy Services, Inc. All Rights reserved.
completion solutions
completion solutions
Tubing Head 7-1/16 5K Dual Block Gate Valve (Actuated, not shown) Tubing Hanger
Features:
Dual Tubing Head Dual Tubing Hanger Dual Block Gate Valves Dual Manifold Cross Dual Tree Cap
7-1/16 5K Connection
11 5K Connection with Test Ports 2-1/16 5K LP Threaded Gate Valve LP Threaded Gate Valve Surface Casing
2-3/8 Couplings
56
2009 T3 Energy Services, Inc. All Rights reserved.
57
2009 T3 Energy Services, Inc. All Rights reserved.
completion products
completion products
58
2009 T3 Energy Services, Inc. All Rights reserved.
59
2009 T3 Energy Services, Inc. All Rights reserved.
Completion Products
completion products
Valves
Gate Valve
10-15,000 WP
Tubing Hangers
Dual with Non-Continuious DHCL
Tubing Heads
60
2009 T3 Energy Services, Inc. All Rights reserved.
61
2009 T3 Energy Services, Inc. All Rights reserved.
Completion Products
completion products
Tubing Heads
Tubing Heads
T3 Tubing Heads are a straight bore design, available in two models TCM for single completion and TC-60 for dual strings
TC-60
11 11 11 11 11 11 11 11 11 11 2000 7 1/16 2000 7 1/16 3000 7 1/16 3000 7 1/16 3000 7 1/16 5000 7 1/16 5000 7 1/16 5000 7 1/16 10000 7 1/16 10000 7 1/16 2000 3000 3000 3000 5000 5000 5000 2 2 1/16 3000 2 2 1/16 3000 7 1/16 5000 2 1/16 5000 2 1/16 5000 LPO STUDDED LPO STUDDED STUDDED STUDDED 7 7 7 7 7 7 7 7 7
17.88 7.12 6.38 7.005 19.80 7.12 6.38 7.005 19.80 7.12 6.38 7.005 19.80 7.12 6.38 7.005 19.8 7.12 6.38 7.005 24.05 7.12 6.38 7.005 24.05 7.12 6.38 7.005 24.74 8.500 6.38 7.005 24.31 8.500 6.38 7.005 26.00 8.500 6.38 7.005
STUDDED 7 5/8
10000 1 13/16 10000 STUDDED 10000 1 13/16 10000 STUDDED 15000 1 13/16 15000 STUDDED
Specify: Model: Tubing Head Bottom Connection: Chart above has standard sizes with working pressures per flange. Top Connection: Chart above has standard sizes with WP per top connection.
62
2009 T3 Energy Services, Inc. All Rights reserved.
63
2009 T3 Energy Services, Inc. All Rights reserved.
Completion Products
completion products
TCM
When Ordering Products:
TCM supports all T3 TC-1A-EN tubing hangers and TC-DC dual hangers Supports TC-1W (wrap-around) Packoff Secondary seal (bottom prep.) FS seal
9 9 9 9 9 11 11 11 11 11 2000 3000 3000 3000 3000 2000 2000 3000 3000 3000 5000 5000 5000 10000 7 1/16 7 1/13 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 2000 3000 3000 5000 5000 2000 3000 3000 3000 5000 5000 5000 10000 10,000 15,000 2 2 2 1/16 2 1/16 2 1/16 2 2 1/16 2 2 1/16 2 2 1/16 2 1/16 3000 5000 5000 3000 3000 5000 5000 LPO LPO 4 1/2 4 1/2
Depth Thru
7.12 4.00 7.005 7.12 4.00 7.005 7.12 4.00 7.005 7.12 4.00 7.005 7.12 4.00 7.005 7.12 6.760 7.005 7.12 6.760 7.005 7.12 6.760 7.005 7.12 6.760 7.005 7.12 6.760 7.005 7.12 6.760 7.005 7.12 6.760 7.005 7.12 6.760 7.005 7.12 6.760 7.005 7.12 6.36 7.005
STUDDED 4 1/2 STUDDED 4 1/2 STUDDED 4 1/2 LPO STUDDED LPO STUDDED LPO STUDDED STUDDED STUDDED STUDDED 7 7 7 7 7 7 7 7 7
11 11 11 11 11
STUDDED 7 5/8
10,000 7 1/16
Specify: Model:
Tubing Head
Bottom Connection: Chart above has standard sizes with working pressures per flange. Top Connection: Chart above has standard sizes with WP per top connection. Surface Wellhead Equipment Catalog
Outlet Type: Chart above has standard sizes. Options: Reducer Bushings. API requirements for PSL, Temperature, and Material Class.
64
2009 T3 Energy Services, Inc. All Rights reserved.
65
2009 T3 Energy Services, Inc. All Rights reserved.
completion products
completion products
A-5P
A-5P single completion tubing head adapters
Bottom Flange Top Connection Dimensions (in.) Size (in.) WP (psi) Size (in.) WP (psi) M 2 M OVERALL HEIGHT/ FLANGE OD THRU LENGTH 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 3000 5000 5000 10000 10000 10000 15000 15000 3000 5000 5000 10000 10000 10000 15000 15000 5000 10000 10000 15000 15000 3000 5000 5000 5000 10000 10000 15000 2 1/16 2 1/16 2 1/16 2 1/16 2 1/16 2 1/16 2 1/16 2 1/16 2 9/16 2 9/16 2 9/16 2 9/16 2 9/16 2 9/16 2 9/16 2 9/16 3 1/16 3 1/16 3 1/16 3 1/16 3 1/16 3 1/8 3 1/8 4 1/16 4 1/16 4 1/16 4 1/16 4 1/16 5000 5000 10000 10000 15000 10.00 10.00 8.75 15.00 15.50 15.50 18.88 18.88 18.88 18.88 19.88 15.00 15.50 15.50 18.88 18.88 18.88 18.88 19.88 15.50 18.88 18.88 19.88 19.88 15.00 15.50 15.50 15.50 18.88 18.88 19.88 MIN. BORE 2.06 2.06 2.06 2.06 2.06 2.06 2.06 2.06 2.56 2.56 2.56 2.56 2.56 2.56 2.56 2.56 3.06 3.06 3.06 3.06 3.06 3.19 3.19 4.25 4.06 4.06 4.06 4.06
Adapters
5000 8.75
10000 15000 5000 5000 10000 10000 8.25 8.75 8.75 8.75 8.75 8.75 8.38 10.00 10.00
Tubing Head Adapters with Seal Bore for Elastomer Seals Features Elastomer seal bore adapter, provides a transition between the tubing head and the tree Studded top connection for connecting the tree May use continuous or non-continuous downhole control lines in selected configurations For pressures 3000 - 15,000 psi API 6A compliant for material, temperature, PSL; Meets PR-2 test requirements Application Used with TC-1A-EN Extended Neck Tubing Hangers with elastomer seals Compatible with typical Control Line Exit Blocks
5000 15000 15000 10000 15000 10000 15000 5000 5000 10000 10000 15000
10000
10000
M2M Tubing Head Adapter with Seal Bore for a Metal-to-Metal Seal Features This is a metal-to-metal seal adapter with inside diameter machined to provide a controlled seal bore for the A-5P-M2M extended neck tubing hanger Studded top connection for connecting the tree May use continuous or non-continuous downhole control lines in selected configurations API 6A compliant for material, temperature, PSL; Meets PR-2 test requirements Application For use in corrosive environments, and for General Service rated at or above 15,000 psi Compatible with typical Control Line Exit Blocks
5000
15000
Top Connection: Studded Service: General, H2S, CO2, Salt Water. Surface Wellhead Equipment Catalog
Specify: Model: A5P Adapter A5P-M2M Adapter Bottom Connection: Chart above has standard sizes with working pressures per flange. Top Connection: Studded
Service: General, H2S, CO2, Salt Water. Options: Porting for DHCL, continuous or non-continuous. Control Line Exit Block: Standard Block or Needle Valve Asembly. API requirements for PSL, Temperature, and Material Class. Surface Wellhead Equipment Catalog
66
2009 T3 Energy Services, Inc. All Rights reserved.
67
2009 T3 Energy Services, Inc. All Rights reserved.
completion products
completion products
T3 offers four load-bearing adapters as an alternative means to hang tubing via tubing threads.
Alternative Adapters
BO-2
ACME Threads
BO-2 Adapter
Tubing Head Adapter Features Machined with a top outside diameter (OD) threaded connection for the Christmas tree Load bearing lower ID threaded connection for hanging tubing Compatible with TC-1W wrap-around tubing hangers Application Used with completions requiring a threaded valve or Christmas tree Ideal for pumping wells without tubing anchors Tubing Head Adapter Features Studded top connection for the Christmas tree Load bearing lower ID threaded connection for hanging tubing Compatible with TC-1W wrap-around tubing hangers No back pressure valve (BPV) prep available Application Suited for reciprocating the tubing at a low cost prior to landing the tree assembly and Coupling Adapters Features BO-2 and BO-10 adapters have Stub ACME interior threads Provides a studded top connection for the Christmas tree Used in situations requiring tubing string manipulation through a wrap-around tubing hanger BO-2 is installed by rotating the tree onto the hanger coupling; BO-10 installs without rotation of the tree Two test ports Application Suited for reciprocating the tubing prior to landing the Christmas tree assembly Compatible with standard Type H back pressure valves, and TC-1W tubing hangers
Lift Threads
ACME Threads
Tubing Threads
BO-2 Coupling
68
2009 T3 Energy Services, Inc. All Rights reserved.
69
2009 T3 Energy Services, Inc. All Rights reserved.
completion products
completion products
B-1 Adapters
B-2P Adapters
B-1 ADapters
Size (in.) WP Size (psi) (in.) Overall Height/ Length Flange Tubing App. (Lbs.) OD Suspension Bottom Flange Top Connection Dimensions (in.) Weight
B-2P ADapters
Bottom Flange WP Size (psi) (in.) Top Connection WP (psi) Overall Height/ Length Dimensions (in.) Flange Tubing Weight Approx. (Lbs.) Size (in.)
7 1/16 2000 3000 5000 2000 3000 5000 2000 2000 3000 5000 2 1/16 2 1/16 2 1/16 2 9/16 2 9/16 2 9/16 3 1/8 3 1/8 3 1/8 3 1/8 2000 5000 5000 2000 5000 5000 2000 3000 3000 5000 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 3.30 14.00 15.00 15.50 14.00 15.00 15.50 14.00 14.00 15.00 15.50 2 3/8 EUE 8RD. 2 3/8 EUE 8RD. 2 3/8 EUE 8RD. 2 7/8 EUE 8RD. 2 7/8 EUE 8RD. 2 7/8 EUE8RD. 3 1/2 EUE8RD. 3 1/2 EUE8RD. 3 1/2 EUE8RD. 3 1/2 EUE8RD. 114 114 126 124 170 230 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16
OD Suspension
Threads
7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 2000 3000 5000 2000 3000 5000 2000 3000 5000 2 3/8 2 3/8 2 3/8 2 7/8 2 7/8 2 7/8 3 1/2 3 1/2 3 1/2 EUE 8RD. EUE 8RD. 7.62 EUE 8RD. EUE 8RD. EUE 8RD. 7.62 EUE 8RD. EUE 8RD. EUE 8RD. EUE 8RD. 14.00 15.00 15.50 14.00 15.00 15.50 14.50 15.00 15.50
Threads
2 3/8 2 3/8 2 3/8 2 7/8 2 7/8 2 7/8 3 1/2 3 1/2 3 1/2 EUE 8RD. EUE 8RD. EUE 8RD. EUE 8RD. EUE 8RD. EUE 8RD. EUE 8RD. EUE 8RD. EUE 8RD. 125 125 125 125 125 125 125 125 125
Bottom Connection: Chart above has standard sizes with working pressures per flange. Top Connection: Chart above has standard sizes with WP per top connection. Surface Wellhead Equipment Catalog
Configuration: Specify the necessary tubing suspension thread size. Options: Premium Tubing Threads. API requirements for PSL, Temperature, and Material Class.
Bottom Connection: Chart above has standard sizes with working pressures per flange. Top Connection: Chart above has standard sizes with WP per top connection.
Tubing Suspension Threads: Chart above has standard sizes. Options: Premium Tubing Threads. API requirements for PSL, Temperature, and Material Class.
70
2009 T3 Energy Services, Inc. All Rights reserved.
71
2009 T3 Energy Services, Inc. All Rights reserved.
completion products
completion products
BO-2 COMPLETIONS:
Use with BO-2 hanger coupling in standard tubing sizes. Allows for reciprocation of the tubing under pressure. BO-2 ADAPTER has stub ACME interior threads for the coupling. BO-2 is installed by rotating the tree onto the hanger coupling.
The BO-2 assembly is fitted with FS Seals. Accepts H back pressure valves, and two-way check valves. Offered up to 15,000 psi.
Bo-2 ADapters
Bottom Flange Top Connection WP (psi)
5000 5000 10000 5000 10000 5000 5000 10000 5000 10000 3000 5000 1000 10000
Coupling Tubing
Adapter OD
15.00 15.50 15.50 18.88 18.88 15.00 15.50 15.50 18.88 18.88 15.00 15.50 15.50 18.88
(in.)
2 1/16 2 1/16 2 1/16 2 1/16 2 1/16 2 9/16 2 9/16 2 9/16 2 9/16 2 9/16 3 1/8 3 1/8 3 1/16 3 1/16
7 1/16 7 1/16 7 1/16
Features Externally threaded coupling for make-up with the BO-2 Coupling Adapter Used with TC-1W wrap-around tubing hanger/packoff to maintain annular pressure Accepts Type-H BPV, 2-way check valves Internal running threads Fits all T3 BO-2 Adapters Applications Suited for reciprocating the tubing prior to installing the Christmas tree assembly
7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16
Specify: Model: BO-2 Coupling Standard Tubing Sizes: 2-3/8 2-7/8 3-1/2
Options: Premium, or standard API threads. Back pressure valve preparation other than H API requirements for PSL, Temperature, and Material Class.
Service: General, H2S, CO2, Salt Water. Surface Wellhead Equipment Catalog
72
2009 T3 Energy Services, Inc. All Rights reserved.
73
2009 T3 Energy Services, Inc. All Rights reserved.
completion products
completion products
BO-10 COMPLETIONS:
Use with BO-10 hanger coupling and TC-1W split packoff. Used in situations requiring tubing string manipulation through a wrap-around tubing hanger. BO-10 installs without rotation of the tree.
The BO-10 assembly is fitted with a Stub ACME ring for easy installation of large Christmas trees. The TC-1W split, wrap-around packoff is required. Accepts Type H back pressure valves, and two-way check valves.
Bo-10 ADapters
Bottom Flange Top Connection WP (psi)
5000 10,000 10.000 5000 10,000 10,000 5000 10,000 10,000
Adapter Bottom
(in.)
7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16 7 1/16
(in.)
2 1/16 2 1/16 2 1/16 2 9/16 2 9/16 2 9/16 3 1/8 3 1/16 3 1/16
Flange OD Suspension
15.50 15.50 18.88 15.50 15.50 18.88 15.50 15.50 18.88 2 3/8 2 3/8 2 3/8 2 7/8 2 7/8 2 7/8 3 1/2 3 1/2 3 1/2
Service: General, H2S, CO2, Salt Water. Options: Premium, or standard API threads (dim. C) Back pressure valve preparation other than H Premium, or standard API threads (dim. C) API requirements for PSL, Temperature, and Material Class.
Bottom Connection: Chart above has standard sizes with working pressures per flange. Top Connection: Chart above has standard sizes with WP per top connection.
74
2009 T3 Energy Services, Inc. All Rights reserved.
75
2009 T3 Energy Services, Inc. All Rights reserved.
completion Products
completion products
TC-1W
The TC-1W is a split, wrap-around packoff that allows fluids displacement while maintaining complete control of annular pressure. A tubing suspension adapter, or coupling-type adapter must be used along with the TC-1W packoff.
TC-1W (wrap around) Packoff Features Split, wrap-around body with elastomer annular seal Allows tubing string manipulation while maintaining annular pressure Compression type annular seal, energized by lockscrews in the tubing head Used with BO-2, or BO-10 Hanger Couplings Used with B-1 or B-2P Suspension Adapters Fits all T3 TCM single completion tubing heads
TC-1W
7 7 7 11 2-3/8 2-7/8 3-1/2 11 upon request TC-1W (wrap-around) Packoff Bowl Size (in.) Tubing Size (in.)
76
2009 T3 Energy Services, Inc. All Rights reserved.
77
2009 T3 Energy Services, Inc. All Rights reserved.
completion products
completion products
Tubing Hangers
T3 offers TC-1A-EN tubing hangers in three industry standard models, each hanger is API 6A compliant for material, temperature, PSL; Meets PR-2 test requirements.These are single string tubing hangers, compatible with type H back pressure valves.
Tubing Hangers
78
2009 T3 Energy Services, Inc. All Rights reserved.
79
2009 T3 Energy Services, Inc. All Rights reserved.
completion products
completion products
Features:
Threaded, standard API or premium tubing threads - common tubing sizes Elastomeric tubing hanger neck seals (2) on OD energized by internal pressure Elastomeric annular seal on OD energized by lockdown screws in the tubing head Alignment slots are provided to engage the hanger halves in proper alignment with the tubing head, various sizes, model TC-60 Can be a direct connection to the lower master valve, without the need for TC-60 dual adapter (can be made integral to a block tree) Benefits: Compatible with T3 TimeSaver Unitized Wellhead Systems Two retractable alignment screws in the tubing head
Options: Porting for DHCL, continuous or non-continuous. Meets API requirements for PSL 1 - 3 for Temperature; available in 410 Stainless Steel, Material Class DD
Available in Standard Tubing Sizes Service: General, H2S, CO2, Salt Water. Surface Wellhead Equipment Catalog
80
2009 T3 Energy Services, Inc. All Rights reserved.
81
2009 T3 Energy Services, Inc. All Rights reserved.
completion products
completion products
Studded Tees
2-1/16 -5M x 2-1/16 -5M 2-9/16 -5M x 2-1/16 -5M 2-9/16 -5M x 2-9/16 -5M 3-1/8 -5M x 2-1/16 -5M 3-1/8 -5M x 2-9/16 -5M 3-1/8 -5M x 3-1/8 -5M 4-1/8 -5M x 2-1/16 -5M 4-1/8 -5M x 2-9/16 -5M 4-1/8 -5M x 3-1/8 -5M 4-1/8 -5M x 4-1/8 -5M 2-1/16 -10M x 1-13/16 -10M 2-1/16 - 10M x 2-1/16 -10M 2-9/16 -10M x 1/13/16 -10M 2-9/16 -10M x 2-1/16 -10M 2-9/16 -10M x 2-9/16 -10M 3-1/16 -10 x 1-13/16 -10M 3-1/16 -10 x 2-1/16 -10M 3-1/16 -10 x 2-9/16} -10M 3-1/16 -10 x 3-1/16 -10M 4-1/16 -10M x 1-13/16 -10M 4-1/16 -10M x 2-1/16 -10M 4-1/16 -10M x 2-9/16 -10M 4-1/16 -10M x 3-1/16: -10M 4-1/16 -10M x 4-1/16 -10M 4-1/16 -15M x 1-13/16 -15M 4-1/16 -15M x 2-1/16 -15M 4-1/16 -15M x 2-9/16 -15M 4-1/16 -15M X 3-1/16 -15M 4-1/16 -15M x 4-1/16 -15M
Studded Tee
82
2009 T3 Energy Services, Inc. All Rights reserved.
83
2009 T3 Energy Services, Inc. All Rights reserved.
completion products
completion products
Tree Caps
Tree Caps
TREE CAPS
2-1/16-5M Tree Cap 2-9/16-5M Tree Cap 3-1/8-5M Tree Cap 4-1/8-5M Tree Cap 2-1/16-10M Tree Cap 2-9/16-10M Tree Cap 3-1/16-10M Tree Cap 4-1/16-10M Tree Cap 2-1/16-15M Blind flange with 2-9/16 autoclave 2-9/16-15M Blind flange with 2-9/16 autoclave 3-1/16-15M Blind Flange with 2-9/16 autoclave 4-1/16-15M Blind flange with 2-9/16 autoclave
7-1/16-5M X 2-3/8 X 2-3/8-5M, DD Trim, Dual BHTA, see line 501 7-1/16-5M X 2-3/8 X 2-7/8-5M, Dual Tree Cap 7-1/16-5M X 2-3/8 X 2-7/8-5M, Dual Tree Cap 9-5M X 2-3/8 X 2-3/8-5M, Dual Tree Cap 9-5M X 2-3/8 X 2-7/8-5M, Dual Tree Cap 9-5M X 2-7/8 X 2-7/8-5M, Dual Tree Cap 11-5M X 2-3/8 X 2-3/8-5M, Dual Tree Cap 11-5M X 2-3/8 X 2-7/8-5M, Dual Tree Cap 11-5M X 2-7/8 X 2-7/8-5M, Dual Tree Cap
11-5M X 3-1/2 X 3-1/2-5M, Dual Tree Cap
Tree Caps
84
2009 T3 Energy Services, Inc. All Rights reserved.
85
2009 T3 Energy Services, Inc. All Rights reserved.
completion products
completion products
Block trees are typically used where space is at a premium Available in various sizes for customers Ideal for critical or severe service Direct connection to the tubing hanger
Benefits
Integral valve body minimizes potential leak paths Compact, interchangeable block gate valve internals replace overall height and profile typically seen in traditional valve dimensions
T3 offers several types of dual trees: Dual Solid Block Composite Block Either TC-60 or TC-DC hangers can be used in conjunction with either valve type. Specify: Dual Valve Model: Dual Block Surface Wellhead Equipment Catalog
Accessory Items: TC-DC Rotating Flange Adapter (only used with a single completion tubing head) Special ACME Threaded Bull Plug Interchangeable S Seals, Internal Seal Sleeve Pockets Meets API requirements for PSL 1 - 3 for Temperature
Block Trees
Surface Wellhead Equipment Catalog
86
2009 T3 Energy Services, Inc. All Rights reserved.
87
2009 T3 Energy Services, Inc. All Rights reserved.
T3 S5 Gate Valves
Gate Valves are available in two configuration
Equipment:
Seals - proprietary seal design API Flanged - ANSI -orThreaded - API EUE 8Rd Suitability - 5K & below
Features: - API 6A PR-2 Qualified - Meets PSL (1 & 2) Tests - Bi-Directional Sealing - Flanged -or- Threaded - AA, BB, CC, EE, FF Trim - Field Serviceable
Handwheel operated or Valve can be Actuated with a Pneumatic or Grease Fitting for re-greasing in the field Backseat-type Safety Shear Pin protects non-rising stem Body Lubrication High Performance Non-Elastomeric Stem Packing doesnt need energizing,
Torque
S5
The Difference:
T3 Gate Valves are: Efficient Low-torque
D
C D
Hydralic-Actuator
B A
Stem
Flanged
Threaded
Fitting Metal-to-Metal Bonnet Seal Spring-loaded Seat with Teflon Insert for Sealing to Gate Seat to Body Seal
replaceable in the field under full pressure Floating Gate and Seal Allows
A
11.62 14.62
A
9.62 9.62
End
18 18 24 24 N/A
Bi-directional Sealing
13.12 10.25 6.97 19.06 16.62 10.25 6.97 19.06 14.12 N/A 17.12 18.62 6.97 19.06 6.97 19.06 6.97 19.06
Service
88
2009 T3 Energy Services, Inc. All Rights reserved.
Body & Bonnet Alloy Steel 4130 Gates & Seats Alloy Steel 4130 Stem Alloy Steel 4130
Material Class AA BB CC
General, Slightly Corrosive Alloy Steel 4130 Stainless Steel 410 Stainless Steel 17-4 ph
Sour, Non- Corrosive Alloy Steel 4130 Alloy Steel 4130 Alloy Steel 4130
Slightly Corrosive
Full Stainless
DD
EE FF
89
2009 T3 Energy Services, Inc. All Rights reserved.
Features: - API 6A PR-2 Qualified - Meets PSL (1 & 2) Tests - Bi-Directional Sealing - Flanged -or- Threaded - AA, BB, CC, DD, EE, FF Trim - Field Serviceable
Handwheel operated or Valve can be Actuated with a Pneumatic or Hydralic-Actuator Grease Fitting for re-greasing in the field Safety Shear Pin protects non-rising stem Metal-to-Metal High Performance Non-Elastomeric Stem Packing doesnt need energizing, replaceable in the field under full presGate to Seat Sealing with Hard Faced Surfaces Backseat-type Stem Body Lubrication Fitting
S10
The Difference:
T3 Gate Valves are: Efficient Low-torque Reliable Low Maintenance
Actuators - hydraulic - pneumatic Flows - bi-directional API Flanged Suitability - 10K & above
B A
A
18.75
B
4.60
C
17.86
D
22.46
20.50
5.18
18.06
23.24
164
24
22.25
7.72
19.06
26.78
207
30
available in 2009
Body & Bonnet Alloy Steel 4130 Gates & Seats Alloy Hard Faced Steel 4130 Stem Alloy Steel 4130
Material Class AA BB CC
DD
EE FF
90
2009 T3 Energy Services, Inc. All Rights reserved.
91
2009 T3 Energy Services, Inc. All Rights reserved.
Features: - Materials and Manufacturing NACE MR0175 and API 6A Compliant - Fully Interchangeable with other OEM choke parts - Flexible Field-FitTM Design - WP 5,000 -to- 20,000 psi
Benefits: - Best Commercial Offering in the Choke Industry - Fits other OEM Trim Styles - Globally Available Parts
718 /725
Handwheel Operated or Actuated with a Pneumatic, Hydralic, Electro-hydralic or Electric Actuator Adjustable Choke converts to a Positive Choke and vice-versa Needle & Seat External Sleeve Positive Cage Positive Seat
Stem Lock
Chokes
T3 Field-Fit Choke Program = any parts at any time, without any sizing problems.
iamond Series MT Choke is designed for production Christmas trees and drilling manifold services. It provides an economical fluid control in high pressures and large volumes.
Four trim types are available, interchangeable within the same choke body. The body and bonnet are forged in several selections of API class materials. Temperature Range of 0F to 250F is standard; ranges within -75F to 400F. Surface Wellhead Equipment Catalog
iamond Series MT Choke Field-Fit program is only offered by T3 Energy. Selection of internal style is based on customer preference. Chokes have established bolting dimensions and piping connections within the industry that all T3 MT chokes adheres to.
This standard eliminates costs associated with any downtime that could occur with unneccessary piping modification. Through the Field-Fit program, your equipment is guaranteed to fit any arrangement in the world.
92
2009 T3 Energy Services, Inc. All Rights reserved.
93
2009 T3 Energy Services, Inc. All Rights reserved.
94
2009 T3 Energy Services, Inc. All Rights reserved.
www.t3energy.com