Documente Academic
Documente Profesional
Documente Cultură
Portable test pumps used for testing tubes, pipes, and various pressure vessels
P-Series A self-contained pump used for testing tubes, pipes, or various pressure vessels. It contains all stainless steel high pressure components and an easy to read 4 inch diameter pressure guage - all stored in the tool box. The mating quick connect couplings are available for air inlet, water inlet, and high pressure outlet. The P-Series controls allow the pump to continuously maintain pressure or shut off to determine a pressure drop. The operating range for inlet air supply is 25 to 125 psi (1.72 to 8.58 Bar), and temperature range of 40 to 150F. Q-Series Hand Pump A self-contained and portable hand pump for testing tubes, pipe, or various pressure vessels. Completely independent from supplied water source; the pump is integrated into a 5 gallon attached resevoir which is easily refilled. Its also independent from supplied compressed air source, and is hand operated by use of a convenient handle. With the turn of a knob, the pressure output can be adjusted to either 1,000 psi, 2,000 psi, or 3,000 psi for the appropriate application. Its portable, lightweight, and requires only one man to operate. There is also an optional silicone-filled gauge for all weather use. The simplicity of construction provides durability and longevity. Blue Max 3 A portable test pump used for testing tubes, pipes, or various pressure vessels. The BMX3 has an air operated pump, with wide ranges of pressures and volumes, easy to operate controls, and output pressure regulation controls. Its portable and lightweight design provides a low center of gravity for stability, and semi-pneumatic tires make it portable for a one man operation. There is low maintenance by including a mounted regulator/ lubricator, silicone-filled test guage, and a water inlet suction strainer. The BMX3s enclosed cabinet means a safer operation, quiet design, protection against component abuse and damage, and a convenient control location.
Manufactured under a QA system certified to ISO-9001. Can be supplied under ANSI N45.2, 10CFR50 Appendix B.
Q-Series
Model Number PSR-HP-3000 Part Number PSR-HP-0001 Length 24 Width 7 Description Gauge Assembly Height 27 Approximate Shipping Weight 25 lbs Maximum Outlet Pressure (psi (Bar)) 3,000 (207) Discharge Volume per Stroke (cu in (ml)) 0.730 (11.96)
*Total required SCFM to produce rated flow at maximum pump pressure. This is relevent only when the system is used for continuous injection at the maximum rated pressure. Normal testing applications require much less SCFM to begin with and fall to (0) at stall test pressure. Length 19 Width 21 Height 44 Approximate Shipping Weight 85 lbs
EST Group Hatfield, PA 19440 USA (P) 215.721.1100 800.355.7044 (F) 215.721.1101 est-info@curtisswright.com http://estgroup.cwfc.com
EST Group B.V. Hoorn 312a 2404 HL Alphen aan den Rijn The Netherlands (P) +31.172.418841 (F) +31.172.418849 est-emea@curtisswright.com
EST Group Asia 35 Tannery Road, #11-10 Tannery Block Ruby Industrial Complex Singapore 347740 (P) +65.6745.8560 (F) +65.6742.8700 est-asia@curtisswright.com