Documente Academic
Documente Profesional
Documente Cultură
M L R
2. Copy posts to \POSTS folder. Each product has its own \POSTS folder.
II. Edit machine and control definitions to use migrated libraries (All products)
These steps are optional. Complete them if you want your machine and control definitions to
use the libraries you migrated from your current Mastercam workstation.
1. If desired, edit machine definition to use
migrated libraries as defaults.
Repeat for each machine definition.
1a. Set default tool library for machine. See Section 3.1.4.2 on page 42.
1b. Set default material library for machine. See Section 3.1.4.2 on page 42.
2. If desired, edit control definition to use
migrated libraries as defaults.
Repeat for each control definition.
2a. Set default toolpath defaults file
(.defaults).
See Section 3.1.4.4 on page 45.
2b. Set default operations library
(.operations).
See Section 3.1.4.4 on page 45.
III. Edit configuration files
These steps are optional. Complete them if you want Mastercam to automatically load
selected machines by default. Repeat this section for inch and metric .config files.
1. Select default machine to load when
starting Mastercam.
See Section 3.1.4.5 on page 46.
2. Select a default machine for each product. Section 3.1.4.5 on page 46.
IV. Convert setup sheet files M L R
1. If desired, convert setup sheets (.set files). See Section 3.1.5 on page 53.
Youre now ready to convert your current parts
and machining jobs!
See Section 4.1 on page 56.
Posts and Machine Definition Worksheet Page 1 of 1
Supplied by Reseller Workstation ID: ______________
C
UG_TransitionGuide.book Page 7 Wednesday, July 6, 2005 6:54 PM
UG_TransitionGuide.book Page 8 Wednesday, July 6, 2005 6:54 PM
Complete the steps on this worksheet if you will be using the UpdatePost utility to convert your existing posts
and automatically generate machine and control definitions.
I. Preparation (All products)
1. Locate and organize the posts you want to
convert.
Organize them in folders by product type
and version. For each post, include the
PST/PSB and TXT files in the same folder.