Documente Academic
Documente Profesional
Documente Cultură
The SMA series is supplied in ON Semiconductors exclusive, cost-effective, highly reliable SURMETICt package and is ideally suited for use in communication systems, automotive, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications. This new line of 1.5 watt Zener diodes offers the following advantages:
Specification Features http://onsemi.com
PLASTIC SURFACE MOUNT ZENER VOLTAGE REGULATORS 600 WATTS PEAK POWER
Standard Zener Breakdown Voltage 15 V to 150 V Peak Power 600 Watts @ 100 ms ESD Rating of Class 3 (> 16 KV) per Human Body Model Response Time is Typically < 1.0 ns Flat Handling Surface for Accurate Placement Package Design for Top Slide or Bottom Circuit Board Mounting Low Profile Package PbFree Packages are Available
CATHODE
ANODE
Mechanical Characteristics CASE: Void-free, transfer-molded plastic FINISH: All external surfaces are corrosion resistant and leads are MARKING DIAGRAM
readily solderable
MAXIMUM CASE TEMPERATURE FOR SOLDERING PURPOSES:
xx AYWWG
band
MOUNTING POSITION: Any
xx A Y WW G = Specific Device Code = (See Table on Page 2) = Assembly Location = Year = Work Week = PbFree Package
ORDERING INFORMATION
Device BZG03C15 BZG03C15G BZG03C150 BZG03C150G Package SMA SMA (PbFree) SMA SMA (PbFree) Shipping 5000/Tape & Reel 5000/Tape & Reel 5000/Tape & Reel 5000/Tape & Reel
For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specification Brochure, BRD8011/D.
Semiconductor Components Industries, LLC, 2005
BZG03C15 Series
MAXIMUM RATINGS
Rating Peak Power Dissipation (Note 1) @ TL = 25C, tP = 100 ms DC Power Dissipation @ TL = 75C Measured Zero Lead Length (Note 2) Derate Above 75C Thermal Resistance, JunctiontoLead Forward Surge Current (Note 3) @ TA = 25C Operating and Storage Temperature Range Symbol PZSM PD Value 600 1.5 20 50 40 65 to +150 Unit W W mW/C C/W A C
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. 100 ms, nonrepetitive square pulse 2. 1 in. square copper pad, FR4 board 3. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum
I IF
SYMBOLS DEFINITIONS
Symbol IPP VC VRWM Parameter Maximum Reverse Peak Pulse Current Clamping Voltage @ IPP Working Peak Reverse Voltage Maximum Reverse Leakage Current @ VRWM Breakdown Voltage @ IT Test Current Forward Current Forward Voltage @ IF
VC VBR VRWM IR VF IT
IR VBR IT IF
IPP
VF
UniDirectional TVS
ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted, VF = 1.2 V Max. @ IF = 0.5 A for all types)
VRWM (Note 4) Volts 11 110 Breakdown Voltage IR @ VRWM mA 1 1 VBR (V) (Note 5) Min 13.8 138 Nom 15.0 150 Max 15.6 156 @ IT mA 50 5
Typ
Zzt @ IT
Max
W 5.0 130
W 10.0 300
4. A transient suppressor is normally selected according to the working peak reverse voltage (VRWM), which should be equal to or greater than the DC or continuous peak operating voltage level 5. VBR measured at pulse test current IT at an ambient temperature of 25C *The G suffix indicates PbFree package available.
http://onsemi.com
2
BZG03C15 Series
RATING AND TYPICAL CHARACTERISTIC CURVES
100 NONREPETITIVE PULSE WAVEFORM SHOWN IN FIGURE 2. TA = 25C
C, CAPACITANCE (pF)
10
1,000
100
0.1
104
0.001
10
10
100 200
100 80 60 40 20 0
40
200
120
http://onsemi.com
3
BZG03C15 Series
PACKAGE DIMENSIONS
A1
SOLDERING FOOTPRINT*
4.0 0.157
2.0 0.0787
2.0 0.0787
SCALE 8:1 mm inches
*For additional information on our PbFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
4
BZG03C15/D