Documente Academic
Documente Profesional
Documente Cultură
10/29/13
If dormant period is over without OOW's reset, system activates all reset units by 2 Hz flash light. All units are dimmable via central dimmer on control panel (WAP 220.11.1.0) Minimum illumination has been fixed. 4.2.2 Alert stage 1 If dormant period and flash light period (15 sec) are over without OOW's reset, system activates electronic buzzer on terminal board module (WAT 220.24.1.0) as well as additional buzzers located on bridge wing area.Alert stage 1 is triggered to pay attention to monitored OOW. Sound characteristics can be adapted on by parameter settings (PLC -P1). Additional buzzers can be connected directly on terminal board module (WAT 220.24.1.0, -X1: 49, 50 & 55, 56). 2 potential free contacts have been closed (WAT 220.24.1.0, -X1: 7, 8 & 9,10) for further use as well as for VDR link. 4.2.3 Alert stage 2 If dormant period, flash light period (15 sec) and alert stage 1 (15 sec) are over without OOW's reset, system activates 2 potential free n/o contacts on terminal board module (WAT 220.24.1.0, -X1: 13, 14 & 15, 16) for generating further alert via optic / acoustical alarm devices in officer's area (cabins or staircase) as well as for VDR link. 4.2.4 Alert stage 3 If dormant period, flash light period (15 sec), alert stage 1 (15 sec) and alert stage 2 (30 sec) are over without OOW's reset, system activates 2 potential free n/o contacts on terminal board module (WAT 220.24.1.0, -X1: 17, 18 & 19, 20) for General Alarm trigger as well as for VDR link. 5.1 Emergency call Monitored OOW is able to generate an emergency call by pushing any reset unit longer than 5 sec. That activates without delay alert stage 2 and subsequently alarm stage 3. After emergency call has been released, reset is possible by pushing a reset unit. top
www.sm-electrics.de/sm-electrics/watch-alarm-system/officer-of-the-watch-oow.php#
2/2