Documente Academic
Documente Profesional
Documente Cultură
Output Ratings
Generating Set Model 380-415V,50Hz Prime* 250.0 kVA 200.0 kW * Refer to ratings definitions on page 4. Ratings at 0.8 power factor. Standby* 275.0 kVA 220.0 kW -
Technical Data
Engine Make & Model: Alternator Model: Base Frame Type: Circuit Breaker Type: Frequency: Engine Speed: RPM Fuel Tank Capacity: litres (US gal) Fuel Consumption, Prime: l/hr (US gal/hr) Fuel Consumption, Standby : l/hr (US gal/hr) 58.9 (15.6) 63.3 (16.7) Perkins 1306C-E87TAG6 LL5014J Heavy Duty Fabricated Steel 3 Pole MCCB 50 Hz 1500 350 (92.5) 60 Hz -
Lubrication system
Oil Filter Type: Total Oil Capacity l (US gal): Oil Pan l (US gal): Oil Type: Cooling Method: Spin-On, Full Flow 26.4 (7.0) 22.7 (6.0) API-CH-4 Water
Performance
Engine Speed: RPM Gross Engine Power: kW (hp) -Standby: -Prime: BMEP: kPa (psi) -Standby: -Prime: Regenerative Power: kW
50 Hz
1500 250.9 (336.0) 228.5 (306.0) 2306.0 (334.4) 2099.0 (304.5) 20.8
60 Hz
-
Fuel System
Fuel Filter Type: Replaceable Element Recommended Fuel: 110% Load Prime 50 Hz 60 Hz Standby 50 Hz 60 Hz 63.3 (16.7) 50.2 (13.3) 34.3 (9.1) 63.3 (16.7) 58.9 (15.6) 46.1 (12.2) 31.1 (8.2) Class A2 Diesel Fuel Consumption: l/hr (US gal/hr) 100% Load 75% Load 50% Load
Air System
Air Filter Type: Combustion Air Flow: m/min (cfm) -Standby: -Prime: Max. Combustion Air Intake Restriction: kPa (in H2O) Radiator Cooling Air Flow: m/min (cfm) External Restriction to Cooling Air Flow: Pa (in H2O)
50 Hz
Paper Element 16.4 (579) 16.4 (579) 6.2 (25.0) 424.2 (14980) 125 (0.5)
60 Hz
(based on diesel fuel with a specific gravity of 0.85 and conforming to BS2869, Class A2)
Cooling System
Cooling System Capacity: l (US gal) Water Pump Type: Heat Rejected to Water & Lube Oil: kW (Btu/min) -Standby: -Prime: Heat Radiation to Room: kW (Btu/min) -Standby: -Prime: Radiator Fan Load: kW (hp)
50 Hz
45.3 (12.0)
60 Hz
-
Exhaust System
Silencer Type: Silencer Noise Reduction Pressure Drop Across Silencer System: kPa (in Hg) Silencer Noise Reduction
50 Hz
Level 1
60 Hz
SD100 (0) 8.70 (2.569) 12 10.7 (3.2) 44.5 (1572) 44.5 (1572) 528 (982) 500 (932) -
Centrifugal
110.0 (6256) 103.0 (5858) 44.0 (2502) 40.0 (2275) 10.3 (13.8)
Level: dB Max. Allowable Back Pressure: kPa (in. Hg) Exhaust Gas Flow: m/min (cfm) -Standby: -Prime: Exhaust Gas Temperature: C (F) m/min (cfm) -Standby: -Prime:
Cooling system designed to operate in ambient conditions up to 50C (122F). Contact your local Olympian dealer for power ratings at specific site conditions.
60 Hz
623
585
536
686
300
300
300
300
300
300
300
300
300
Xd X'd X''d
Reactances shown are applicable to standby ratings. * Based on 30% voltage dip. Improved motor starting capability is available with optional Permanent Magnet generator or AREP excitation. ** With optional Permanent Magnet generator or AREP excitation.
Operating Data
Overspeed: RPM Voltage Regulation (steady state) (% ): Wave Form NEMA = TIF: Wave Form IEC = THF: Total Harmonic Content LL/LN: Radio Interference: 2250 +/- 0.5 50 2.0% 4.0%
Technical Data
Voltage
kVA
415/240V 400/230V 380/220V 230/115V 220/127V 220/110V 200/115V 250.0 250.0 250.0 250.0 250.0 250.0 250.0
Prime
kW
200.0 200.0 200.0 200.0 200.0 200.0 200.0
Standby
kVA
275.0 275.0 275.0 275.0 275.0 275.0 275.0
Voltage
kW
220.0 220.0 220.0 220.0 220.0 220.0 220.0
Prime
kVA kW
Standby
kVA kW
Dimensions: mm (in)
Length Width Height 2960 (116.5) 1003 (39.5) 1718 (67.6)
Note: General configuration not to be used for installation. See general dimension drawings for detail.
Definitions
Standby Rating
These ratings are applicable for supplying continuous electrical power (at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO 8528-3).
General Data
Documents
Operation and maintenance manuals provided. Wiring diagrams included.
Quality Standards
BS4999, BS5000, BSEN60034, BSEN61000, IEC60034.
Prime Rating
These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours.
Warranty
All equipment carried full manufacturer's warranty.
Information contained in this publication may be considered confidential. Discretion is recommended when distributing. Materials and specifications are subject to change without notice. CAT, CATERPILLAR, their respective logos and ''Caterpillar Yellow'', as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.