Documente Academic
Documente Profesional
Documente Cultură
Legend COMMAND RESPONSE = return/enter key = Enter this command/value. = The system response.
Connecting your laptop Connect your laptop to the management port using the supplied cable (RJ-45 to DB-9) Hyperterm (or other program) settings: COM port at 9600 bps, 8-none-1. Terminal emulation is VT100.
Login into the PP2430 Press until the LOGIN: prompt appears. Type Manager Wait for the prompt [1:TN] $ Type bcc Wait for the bcc> prompt Type config Wait for the box# prompt.
Initial Setup data Enter the SiteName (PCUSN name) for the terminal and telnet connection
telnet server prompt {[%slot%:SiteName]$ } auto-user-script autouser.bat back back console portnum 1 prompt {[%slot%:SiteName]$ } auto-manager-script automgr.bat auto-user-script autouser.bat back
back back
Check the output of the PP2430 against the list below. If information in the current configuration does not match the information in the list below please input the commands for that block, as shown below.
Setup data
board module 1 type arnmbsfetx back board module 2 type arnssync back board module 3 type arnfe1 back snmp lock-address 255.255.255.255 community label public access read-write manager address 0.0.0.0 back back back tftp default-volume 1 back telnet client back server prompt {[%slot%:SiteName]$ } auto-user-script autouser.bat back back
back rip back tcp back back ethernet slot 1 connector 1 circuit-name E11 ip address <ip address> mask 255.255.255.248 host-cache-aging cache-120 arp back back auto-neg speed-select auto-negotiation advertised-capabilities {10base-t 10base-t-fd 100base-x 100base-x-fd} back back fe1 slot 1 connector 2 logical-line circuit-name FE1-2-1 time-slots 1 bofl disabled promiscuous enabled service transparent ppp line back ip address 10.120.131.9 mask 255.255.255.252 arp back back back back port-line-test back back console portnum 1 prompt {[%slot%:SiteName]$ } auto-manager-script automgr.bat auto-user-script autouser.bat back console portnum 2 modem enabled back back
Save the configuration At the box# prompt type exit Wait for the bcc> prompt Type save config config Type exit Wait for the [1:Sitename] prompt Type logout