Documente Academic
Documente Profesional
Documente Cultură
Catalog HY09-030/US
The Gear Pump Divisions ability to engineer specialty products for unique applications has kept us at the forefront of technology, and ensured our position as the industry leader. Our success has come from providing a quality product with excellent sales and service support. We manufacture hydraulic components for a wide range of industries including: Construction Refuse/dump truck Material handling Forestry Agriculture Industrial
WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE. This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any time without notice.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. This offer and its acceptance are governed by the provisions stated in the Offer of Sale.
Catalog HY09-030/US
Contents Index
Average Output Flow - Pumps ..................................... 2 Average Input Power - Pumps ..................................... 3 PL Factor ........................................................................ 3 Average Performance Data - Motors 030/050/075 ..... 4 Average Performance Data - Motors 031/051/076 ..... 5 Dimensional Data ....................................................... 6-7 Approximate Weight ..................................................... 6 030/031 Series Coding ................................................... 8 050/051 Series Coding ................................................. 14 075/076 Series Coding ................................................. 19 Offer of Sale ................................................................. 24
Pump/Valve Products
PGP030/031
Flows to 41 GPM Pressures to 3000 psi Speeds to 2400 rpm Priority valves Two-speed valves Piggybacks Winch motors Flow dividers
PGP050/051
Flows to 66 GPM Pressures to 3000 psi Speeds to 2400 rpm Priority valves Two-speed valves Unloader valve Winch motors Flow dividers Piggybacks
PGP075/076
Flows to 128 GPM Pressures to 3000 psi Speeds to 2400 rpm Two-speed valves Piggybacks Winch motors Flow dividers
Catalog HY09-030/US
viscosity 150 SSU at 100F. Requests for more specific data should be directed to our Product Support Department through our sales representatives.
PGP030/031
Flow data at 2500 PSI (172 bar) unless noted.
Speed RPM
900 1200 1500 1800 2100 2400
Catalog HY09-030/US
PL Chart
Shaft Style 030/031 SAE A Spline SAE B Spline SAE B Key SAE BB Spline SAE BB Key SAE C Spline Connecting Shaft 050/051 SAE B Spline SAE B-B Spline SAE B-B Key SAE C Spline SAE C Key Connecting Shaft 075/076 SAE C Single SAE C Tandem SAE C Key Connecting Shaft Integral Two Piece Shaft & Gear Style 2,600 7,900 4,850 12,150 7,250 --6,100 9,400 5,600 12,900 10,900 -8,000 12,500 7,500 -2,600 5,850 4,850 -5,850 5,850 5,850 6,100 -5,600 8,500 8,500 8,500 8,000 -7,500 10,000
Catalog HY09-030/US
PGM030
Speed RPM 800
1" Gear Output Torque 550 62 1200 550 62 1600 550 62 2000 550 62 Power 7 5 10.5 8 14 10.5 17.5 13 Input Flow 9 34 13 49 16 60.5 19.5 74
1 " Gear Output Torque Power 870 98.5 870 98.5 860 97 850 96 11 8 16.5 12.5 22 16.5 27 20 Input Flow 13 49 18 68 23 87 28 106
2" Gear Output Torque Power 1150 130 1150 130 1140 129 1125 127 14.5 11 22 16.5 29 21.5 36 27 Input Flow 17 64.5 23.5 89 30.5 115 37 140
U.S./Metric
Torque: In.-lbs. Nm
1 " Gear Output Input Flow 15.5 58.5 22.5 85 30 114 37 140
Power: HP kW
2" Gear Output Torque Power 1850 209 1840 208 1750 197.5 1720 194.5 23.5 17.5 35 26 44.5 33 54.5 40.5 Input Flow 26 98.5 37.5 142 49.5 187 61.5 233
Torque Power 1070 121 1075 121.5 1045 118 1030 116.5 13.5 10 20.5 15 26.5 20 32.5 24
Torque Power 1450 164 1450 164 1440 162.5 1415 160 18 13.5 27.5 20.5 36.5 27 44.5 33
U.S./Metric
Torque: In.-lbs. Nm
1 " Gear
Power: HP kW
2" Gear 3" Gear Input Output Input Flow 50.5 191 72 273 93 352 114 431
U.S./Metric
Torque: In.-lbs. Nm
Power: HP kW
Catalog HY09-030/US
U.S./Metric
Torque: In.-lbs. Nm
Power: HP kW
2" Gear Output Torque Power 1810 204.5 1830 207 1805 204 1770 200 23 17 35 26 46 34.5 56 42 Input Flow 21 79.5 30.5 115 40 151 49 185 2" Gear Output Torque Power 2330 263.5 2340 264.5 2300 260 2250 254 29.5 22 44.5 33 58.5 43.5 71.5 53.5 Input Flow 26 98.5 37.5 142 49.5 187 61.5 233
Output Torque Power 1310 148 1340 151.5 1330 150.5 1290 146 16.5 12.5 25.5 19 34 25.5 41 30.5
U.S./Metric
Torque: In.-lbs. Nm
1" Gear
Power: HP kW
2" Gear Output Torque Power 2875 325 2870 324.5 2830 319.5 2800 316.5 36.5 27 54.5 40.5 72 53.5 89 66.5 Input Flow 35.5 134 49.5 187 64 242 78 295 2" Gear Output Torque Power 3650 412.5 3650 412.5 3600 406.5 3500 395.5 46.5 34.6 69.5 52 91.5 68 111 83 Input 3" Gear* Output Input Flow 50.5 191 72 273 93 352 114 431
U.S./Metric
Torque: In.-lbs. Nm
Power: HP kW
Catalog HY09-030/US
Dimensional Data
Bs(2)(3)
5.44 138.1 5.88 149.2 6.75 171.5
Bm(3)(4)
8.69 220.7 9.50 241.3 10.75 273.1
C(5)(6)
5.44 138.1 5.44 138.1 7.75 196.9
D(5)(7)
5.88 149.2 5.88 149.2 7.94 201.6
E(3)
2.94 74.6 3.38 85.7 3.75 95.3
F(2)
0.75 19.1 0.75 19.1 1.00 25.4
G
1.75 44.5 1.75 44.5 2.00 50.8
H
2.50 63.5 2.88 73.0 3.00 76.2
I
0.88 22.2 1.00 25.4 1.25 31.8
J
2.69 68.3 3.00 76.2 3.94 100.0
K
5.38 136.5 6.00 152.4 7.88 200.0
L(3)(8)
3.31 84.1 3.75 95.3 4.75 120.7
M(4)
3.25 82.6 3.62 92.1 4.00 101.6
mm. 41.3
2.19
mm. 55.6
2.19
mm. 55.6
U.S./Metric
NOTES 1. Dimension will vary with shaft type 2. Dimension + gear width 3. Dimension is for Type 1 SEC. For Type 2: subtract 1.12" (28.4 mm) for 030/031: subtract 1.00" (25.4 mm) for 050/051. 4. Dimension + total gear width 5. Dimension will vary with port type. Subtract 0.25" (6.4 mm) for S.F. ports. 6. For 2.25" and 2.50" gear width in 050/051 series, dimention is 6.75" (171.5 mm). 7. Dimension is for wide B-C. Narrow B-C dimensions: 5.00" (127 mm) for 030/031 and 050/051; 7.19" (182.6 mm) for 075/076. 8. Dimension + front section gear width
1 "
34 15.5 38.5 17.5 75 34
1 "
35 16 40 18 77 35
1 "
36 16.5 41.5 19 80 36
2"
37 17 43 19.5 82 37
2 "
48.5 22 85 39
2 "
50 22.5 87 40
2 "
90 41
3"
92 42
1 "
28 12.5 32.5 15 62 28
1 "
29 13 34 15.5 64 29
1 "
31 14 35.5 16 67 31
2"
32 14.5 37 17 69 32
2 "
42.5 19 72 33
2 "
44 20 74 34
2 "
77 35
3"
79 36
*Determine the approximate weight from Single Unit chart and add weight of each additional assembly from this chart.
Catalog HY09-030/US
Dimensional Data
I K J
Bs L
C I K
J A Bs L
C D I J A Bm L M K
C D
J A Bm L M
Catalog HY09-030/US
Box
Box
Box
(3)
Box
(4)
Box
Box
Box
(5)
(6)
(7)
Box
(8)
Box
(9)
Box
(6)
Box
(7)
(10)
Box
PG
Box 1 Pump/Motor
P M Pump Motor
Box 2 Unit
A B C Single Unit Tandem Unit Single or Tandem w. two-piece shaft (O.B. bearing required)
O.D.Tube Porting (30 series only) 1" 1" JE JI O.D.Tube Porting - Modified Casting* " CA CU " DA DU " " JA JU 1" " KA KU " 1" LA LU 1" MA MU 1" RA SU 1" 1" ZA ZU 1 " 1" GU GU 1" 1 " HU HU BSPP Porting " " " "
JY
CO DO BO YO RO ZO -
WE XE ZE
WI XI ZI
WY XY ZY
Metric Straight Thread " NE " PE " " QE 1" " RE " 1" SE
NI PI QI RI SI
NY PY QY RY SY
KI LI MI
KY LY MY
NPT Porting (030 series only) - Modified Casting* 1" 1" QU QU For All Units To determine direction of shaft rotation, view the unit with the shaft pointing toward you, and the idler (driven) gear beneath the shaft. With clockwise rotation, flow will be left to right. The pump inlet port will be on the left, outlet on the right. The flow is in the opposite direction with counter-clockwise rotation. Inverting the pump will reverse the inlet and outlet ports but not the direction of rotation.
Piggyback Port End - Pump Only Type 030-030, 031-031 (double 030-030 only)
KO
LO
MO
Catalog HY09-030/US
10 1.97 3000
20 3.94 2500
" " " " 1"* 1 "* 1"* 1" 1 "* 1 "* 1 " 1 "* 1 "*
" " " " " " 1" 1" 1" 1 " 1 " 1 "
IL IM IR IC ID IF IJ IK YC YD YF YJ IA IB YL YA YP
IM X IL X IR X ID IC IF IG IH YD YC YF YG IB IA YL YB YM
X X X X X X* X* X X X X X X X X X X X X* X X X X* X* X X X X X X X X X X X X X X
X X X X X X* X*
"* " 1"* 1 "* 1 "* 7/8" 1"* 1"* 1" 1 "* 1 "* 1 "* 1 " 1 "* 1 "* -
" " " " " 7/8" 7/8" 1" 1" 1" 1" 1 " 1 " 1 " 1 "
EC ED EF EJ EK IP EZ EM AC AD AF AJ AK AA AO AL AP AE AU
ED EC EF EG EH IN EZ EL AD AC AF AG AH AO AA AL AM AU AE
X X X X*
X X X X X*
X X X X X* X*
X* X X X*
X X X X*
OD Tube Porting X X X X X X X X X X* X* X* X*
X*
X X X* 2000 2000
X X X X* X*
X*
X*
X X X X* X* X*
X X X X* X*
X X* X*
NOTES 1. Shaded cells are acceptable for motor codes. 2. NPT ports are not recommended for use at pressures in excess of 1500 PSI. 3. X" Means both codes are available. 4. 2000 or 2500 indicates maximum pressure rating on port.
Catalog HY09-030/US
10 1.97 3000
20 3.94 2500
X X X X
X X X X X X X X* 2000 2000
UD UD X UJ X X X X X X X X
X X UJ X X X X X X* X X X X* 2000 2000 X X OD OD X X X X X X X X X
X X X X X* X X X X* X*
X X X*
X X X*
"* " 1"* 1 "* 1"* 1" 1 "* 1 "* 1 " 1 "*
YN YQ X* " YQ YN " YS YS " YV YT " YW YU SL RQ 1" RQ SL 1" MP MP 1" IX VY NJ UI 1 " UI NJ 1 " PF PF 1" VI HW
X X X X*
X X YV X X X X*
X X X YV X* X X X X* 2000 2000
X X X X* X X X* X X 2000
X X X X*
X*
X*
"* " 1"* 1 "* 1"* 1" 1 "* 1 "* 1 " 1 "
EN TQ " TQ EN " ES ES " EV ET " EW EU NL ER 1" ER NL 1" CM CM 1" EX VE 1" VA HA 1 " PA PA 1 " SA QA
X X X X* X*
X X X X*
TQ TQ EV X X X X* X* EV ER ER X* X* 2000 ER ER X* X* X X*
2000
* This porting is acceptable for low pressure inlet port only. NOTES 1. Shaded cells are acceptable for motor codes.
10
Catalog HY09-030/US
10 1.97 3000
20 3.94 2500
X X X X X X
X X X X X* X X X X*
X X X X X X X X X X X*
X X X X X X X X X*
X X
Metric X X X X*
2500 2500
X X X X X X X X
X* X X X X* 2500 2500
X X X*
X X X*
X X* 2000 2000
X X* X*
X X* X X
Max Pressure 3000 psi (207 bar) 3000 psi (207 bar) 3000 psi (207 bar) 3000 psi (207 bar) 3000 psi (207 bar) 2500 psi (172 bar) 2500 psi (172 bar)
11
Catalog HY09-030/US
CCW BL BM BN RB RL RM RN SM SN XL XM XN ZM ZN
* 031 Series only. Used when only one adjacent gear housing has an inlet port.
1" 1"
" "
SR RZ
RS ZR
BSPP Porting
1" 1 " 1 " * 1" 1 " 1 " 1 " 1 " " " " " 1" 1" CX DX FX CT DT FT DV FV XC XD XF TL TC TD TF VD VF
ODT Porting
1" 1 " 1 " * 1" 1 " 1 " 1 " 1 " " " " " 1" 1" CB DB FB CJ DJ FJ DK FK BC BD BF JP JC JD JF KD KF
GM HM HN WN PN SX
MG MH NH NW NP XS
CR DR FR DS FS
RC RD RF SD SF
1" 1"
" "
KJ KX
JK XK
12
Catalog HY09-030/US
ODT Porting
1" 1 " 1 " 1" 1 " 1 " CC BB FF
BSPP Porting
1" 1 " 1" 1 " EE GG
13
Catalog HY09-030/US
Box
Box
Box
(3)
Box
(4)
Box
Box
Box
(5)
(6)
(7)
Box
(8)
Box
(9)
Box
(6)
Box
(7)
(10)
Box
PG
Box 1 Pump/Motor
P M Pump Motor
Box 2 Unit
A B C Single Unit Tandem Unit Single or Tandem w. two-piece shaft (O.B. bearing required)
NI PI QI
NY PY QY
CW
CCW
Double
Piggyback Port End - Pump Only Type 050-050, 051-051 & 050-030, 051-031
Optional: Port end cover with integral R/V Larger rear ports 1 x 1 S.F. or ODT Larger side ports 1 S.F. or ODT inlet 1" ODT outlet
KO
LO
MO
Larger rear ports, but requires special gear housing and cap screws 1 x 1 NPT up to 1500 PSI
NPT Porting (050 series only) " KE " LE " " ME O.D.T. Porting " " " "
KI LI MI
KY LY MY
CE DE FE
CI DI FI
CY DY FY
14
Catalog HY09-030/US
22 5.74 2000
25 6.38 2000
10 2.55 3000
12 3.19 3000
22 5.74 2500
25 6.38 2500
" " 1"* 1 "* 1" 1" 1 "* 1 "* 1 " 1 " 1 "* 1 "*
" " " " 1" 1" 1" 1 " 1 " 1" 1 " 1 "
IC ID IF IJ IK YC YD YF YJ IA IB YL YK YP YR
ID IC IF IG IH YD YC YF YG IB IA YL YH YM YR
X X X X*
ID ID X X X X X
ID ID X X X YD YD X X* X*
ID ID X IJ YD YD X X X* X
X IJ YD YD X X X X X X* YD YD X X IB IB X X
X YJ IB IB X X X X
"* " 1"* 1 "* 1"* 1" 1 "* 1 "* 1 "* 1 " 1 "* 1 "* 1 "
" " " " 1" 1" 1" 1" 1 " 1 " 1 " 1 " 1 "
EC ED EF EJ EK AC AD AF AJ AK AA AO AL AP AE AU AR
ED EC EF EG EH AD AC AF AG AH AO AA AL AM AU AE AR
ED ED X EJ* X* X X X X* X* X*
X X X EJ AD AD X X* X* X* X X* X* AD AD AJ X* AO AO X X* X* AD AD X AJ AO AO X X
X*
X* 2500 2500* X*
X*
X*
X*
OD Tube Porting X X X X X* X* X X X X X* X* X* X X X X* X* X*
X X X X X X* X X X
NOTES 1. NPT ports are not recommended for use at pressures in excess of 1500 PSI. 2. Shaded cells are acceptable for motor codes. 3. X Means both codes are available. 4. 2000 or 2500 indicates maximum pressure rating on port.
15
Catalog HY09-030/US
25 6.38 2000
12 3.19 3000 X X X X* X* X*
15 3.83 3000
051 Series 17 20 22 25 4.46 5.10 5.74 6.38 3000 2500 2500 2500 Split Flange Porting
OA
X X* X* X*
X X X OJ X X OB X X X X X X* ON* X* X
OB
OB
X* X X X X* X* X*
X X X X* X* X* X X* X*
X X
X X
X X
X*
X*
X X* X* X* X*
X* X*
BSPP Porting
YN YQ X* " YQ YN " YS YS 2000 " YV YT 2000* " YW YU SL RQ 1" RQ SL 1" MP MP 1" IX VY 1" VI HW NJ UI 1 " UI NJ 1 " PF PF 1 " IS IQ " " " 1" 1" 1" 1 " 1 " EN TQ ES EV NL ER CM TQ X* EN ES 2000 ET 2000* ER NL CM UA EX VE PA PA SA QA X X X X* SL* YQ YQ X YV* YW* RQ* 2000 2000* YQ YQ X YV* RQ* X X* NJ* YV RQ RQ X VY* RQ RQ IX UI UI X RQ RQ X IX X UI UI X X RQ* X* 2500 2500 2500 2500* SL* 2500 2500 2500 2500* RQ* YQ YQ YV* RQ* YQ YQ X YV* RQ* 2500 2500 2500* RQ RQ IX UI UI X RQ RQ X IX UI UI X X*
TQ TQ X X*
TQ TQ EV ER ER X X* EV ER ER X UA* EX* X X*
X*
ER ER UA EX X X* UA EX X X
ER
* This porting is acceptable for low pressure inlet port only. NOTES 1. Shaded cells are acceptable for motor codes. 2. X Means both codes are available.
16
Catalog HY09-030/US
25 6.38 2000
10 2.55 3000 X*
12 3.19 3000
15 3.83 3000
051 Series 17 20 22 25 4.46 5.10 5.74 6.38 3000 2500 2500 2500 Metric Split Flange Porting
RV UR UR X UX X* UO UO X X* UR UR X UX UO UO X X X X X X* X*
2500*
X* X* X*
UX UO UO X X X*
X X X X* X*
X X X X* X*
X X
2000 2000* X*
X* X X* X*
X X* X*
X X
X X
X X* X*
X*
X X* X*
X X* X*
* This porting is acceptable for low pressure inlet port only. NOTES 1. Shaded cells are acceptable for motor codes. 2. X Means both codes are available. 3. 2000 or 2500 indicates maximum pressure rating on port.
in.3/rev. 1.28 1.91 2.55 3.19 3.83 4.46 5.10 5.74 6.38
cm3/rev. 20.9 31.3 41.8 52.2 62.7 73.1 83.6 94.0 104.5
Max Pressure 3000 psi (207 bar) 3000 psi (207 bar) 3000 psi (207 bar) 3000 psi (207 bar) 3000 psi (207 bar) 3000 psi (207 bar) 2500 psi (172 bar) 2500 psi (172 bar) 2500 psi (172 bar)
17
Catalog HY09-030/US
* 051 Series only. Used when only one adjacent gear housing has an inlet port.
1" 1 " 1 " 1 " 1 " 1" 1 " 1 " 1 " 1"
" " " " 1" 1" " " 1" 1" "
BR LR MR NR MS NS LX MX MZ NZ SR
RB RL RM RN SM SN XL XM ZM ZN RS
No Ports IN OUT
-
DUAL B
DUAL EE GG
ODT Porting
1" 1 " 1 " CB DB FB BC BD BF
PJ CJ DJ FJ DK FK
*JP JC JD JF KD KF
1" 1 "
1" 1 "
RR SS
ODT Porting
1" 1 " 1 " 1 " 1 " 1" " " " 1" 1" " GM HM WM HN WN PN MG MH MW NH NW NP 1" 1 " 1 " 1" 1 " 1 " LL MM NN 1" 1 " 1 " 1" 1 " 1 " CC BB FF
CR DR FR DS FS HZ
RC RD RF SD SF *ZH
1"
"
KJ
JK
NOTE Split flange thread depths may be more shallow than S.A.E. standard. Contact Product Support Department for actual dimensions.
18
Catalog HY09-030/US
Box
Box
Box
(3)
Box
(4)
Box
Box
Box
(5)
(6)
(7)
Box
(8)
Box
(9)
Box
(6)
Box
(7)
(10)
Box
PG
Box 1 Pump/Motor
P M Pump Motor
Box 2 Unit
A B C Single Unit Tandem Unit Single or Tandem w/ two-piece shaft (O.B. bearing required)
JE
JI
JY
TI CW
TY CCW Double
Piggyback Port End - Pump Only Type 075-050, 076-051 & 075-030, 076-031
KO
LO
MO
For All Units To determine direction of shaft rotation, view the unit with the shaft pointing toward you, and the idler (driven) gear beneath the shaft. With clockwise rotation, flow will be left to right. The inlet pump port will be on the left, outlet on the right. The flow is in the opposite direction with counter-clockwise rotation. Inverting the pump will reverse the inlet and outlet ports but not the direction of rotation.
19
Catalog HY09-030/US
10 4.1
12 5.12
15 6.15 3000 X
22 9.22
25 10.25 2500
2500 2500
3000 3000 X X
2500 2500 X X
No Porting
NPT Porting
" 1" 1" 1" 1 " 1 " " " 1" 1" 1" 1 " IC ID ID ID ID ID X ID ID IJ YD YD X X X ID ID IJ YD YD X X X ID IC IJ IG YC YD YD YC YF YF YJ YG YL YL
X/X/-
OD Tube Porting
" 1"* 1 "* 1"* 1" 1 "* 1 "* 1 " 1 "* 1 " " " 1" 1" 1" 1" 1 " 1 " 1 " EC EJ EK AC AD AF AJ AK AL AP ED EG EH AD AC AF AG AH AL AM ED X* ED X* AD AD 2000 X 2000* X* AD AD X ED EJ ED EJ 2500* X* 2500 2500 2500 2500* X X X X X/X X X X* X*
X/-
AR AR
2000
OJ X OB OB X X X X X X* X*
X OJ OB OB X X OU OU X X* X* X X* X*
X/-
X/-/X
X X*
X X* X*
X X*
X X*
2500 2500*
X X*
X X*
X X X X X X* X*
X X* X*
X*
X*
3. X Means both codes are available. 4. 2000 or 2500 indicates maximum pressure rating on port.
20
Catalog HY09-030/US
075/076 Series 25 27 11.275 2000 30 12.3 2000 10 4.1 12 5.12 15 6.15 9.22 10.25 2250 2250
2500 2500
3000 YQ YQ YV RQ RQ X IX*
2500 2500
BSPP Porting
YV RQ RQ X X* UI UI
RQ RQ IX/-
SL*
MP MP
2500*
-/X VI*
X X*
CM CM
UM UM VO HO NO UO UO NO PO PO SO QO UY TO SV JM JQ JS LJ TO UY SV JR JN JS JX
2000* X*/X*
NOTES 1. Shaded cells are acceptable for motor codes. 2. X Means both codes are available. 3. 2000 or 2500 indicates maximum pressure rating on port.
21
Catalog HY09-030/US
* 076 Series only. Used when only one adjacent gear housing has an inlet port.
BSPP Porting
DUAL B 1" 1 " 1 " 1" 1 " 1 " EE GG HH
in.3/rev. 3.08 4.10 5.13 6.15 7.18 8.20 9.23 10.25 11.28 12.30
cm3/rev. 50.4 67.2 84.0 100.8 117.6 134.4 151.2 168.0 184.8 201.6
Max Pressure 3000 psi (207 bar) 3000 psi (207 bar) 3000 psi (207 bar) 3000 psi (207 bar) 3000 psi (207 bar) 2500 psi (172 bar) 2500 psi (172 bar) 2500 psi (172 bar) 2000 psi (138 bar) 2000 psi (138 bar)
ODT Porting
1" 1 " 1" 1 " CC BB
22
Notes
23
Offer of Sale
The items described in this document are hereby offered for sale at prices to be established by Parker Hannifin Corporation, its subsidiaries and its authorized distributors. This offer and its acceptance by any customer (Buyer) shall be governed by all of the following Terms and Conditions. Buyers order for any item described in its document, when communicated to Parker Hannifin Corporation, its subsidiary or an authorized distributor (Seller) verbally or in writing, shall constitute acceptance of this offer. 1. Terms and Conditions of Sale: All descriptions, quotations, proposals, offers, acknowledgments, acceptances and sales of Sellers products are subject to and shall be governed exclusively by the terms and conditions stated herein. Buyers acceptance of any offer to sell is limited to these terms and conditions. Any terms or conditions in addition to, or inconsistent with those stated herein, proposed by Buyer in any acceptance of an offer by Seller, are hereby objected to. No such additional, different or inconsistent terms and conditions shall become part of the contract between Buyer and Seller unless expressly accepted in writing by Seller. Sellers acceptance of any offer to purchase by Buyer is expressly conditional upon Buyers assent to all the terms and conditions stated herein, including any terms in addition to, or inconsistent with those contained in Buyers offer. Acceptance of Sellers products shall in all events constitute such assent. 2. Payment: Payment shall be made by Buyer net 30 days from the date of delivery of the items purchased hereunder. Any claims by Buyer for omissions or shortages in a shipment shall be waived unless Seller receives notice thereof within 30 days after Buyers receipt of the shipment. 3. Delivery: Unless otherwise provided on the face hereof, delivery shall be made F.O.B. Sellers plant. Regardless of the method of delivery, however, risk of loss shall pass to Buyer upon Sellers delivery to a carrier. Any delivery dates shown are approximate only and Seller shall have no liability for any delays in delivery. 4. Warranty: Seller warrants that the item sold hereunder shall be free from defects in material or workmanship for a period of 547 days from the date of shipment to Buyer, or 3,000 hours of use, whichever expires first. THIS WARRANTY COMPRISES THE SOLE AND ENTIRE WARRANTY PERTAINING TO ITEMS PROVIDED HEREUNDER. SELLER MAKES NO OTHER WARRANTY, GUARANTEE, OR REPRESENTATION OF ANY KIND WHATSOEVER. ALL OTHER WARRANTIES, INCLUDING BUT NOT LIMITED TO, MERCHANTABILITY AND FITNESS FOR PURPOSE, WHETHER EXPRESS, IMPLIED, OR ARISING BY OPERATION OF LAW, TRADE USAGE, OR COURSE OF DEALING ARE HEREBY DISCLAIMED. NOTWITHSTANDING THE FOREGOING, THERE ARE NO WARRANTIES WHATSOEVER ON ITEMS BUILT OR ACQUIRED WHOLLY OR PARTIALLY, TO BUYERS DESIGNS OR SPECIFICATIONS. 5. Limitation of Remedy: SELLERS LIABILITY ARISING FROM OR IN ANY WAY CONNECTED WITH THE ITEMS SOLD OR THIS CONTRACT SHALL BE LIMITED EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE ITEMS SOLD OR REFUND OF THE PURCHASE PRICE PAID BY BUYER, AT SELLERS SOLE OPTION IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR SEQUENTIAL OR SPECIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS ARISING FROM OR IN ANY WAY CONNECTED WITH THIS AGREEMENT OR ITEM SOLD HEREUNDER, WHETHER ALLEGED TO ARISE FROM BREACH OF CONTRACT, EXPRESS OR IMPLIED WARRANTY, OR IN TORT, INCLUDING WITHOUT LIMITATION, NEGLIGENCE, FAILURE TO WARN OR STRICT LIABILITY. 6. Changes, Reschedules and Cancellations: Buyer may request to modify the designs or specifications for the items sold hereunder as well as the quantities and delivery dates thereof, or may request to cancel all or part of this order, however, no such requested modification or cancellation shall become part of the contract between Buyer and Seller unless accepted by Seller in a written amendment to this Agreement. Acceptance of any such requested modification or cancellation shall be at Sellers discretion, and shall be upon such terms and conditions as Seller may require. 7. Special Tooling: A tooling charge may be imposed for any special tooling, including without limitation, dies, fixtures, molds and patterns, acquired to manufacture items sold pursuant to this contract. Such special tooling shall be and remain Sellers property notwithstanding payment of any charges by Buyer. In no event will Buyer acquire any interest in apparatus belonging to Seller which is utilized in the manufacture of the items sold hereunder, even if such apparatus has been specially converted or adapted for such manufacture and notwithstanding any charges paid by Buyer. Unless otherwise agreed, Seller shall have the right to alter, discard or otherwise dispose of any special tooling or other property in its sole discretion at any time. 8. Buyers Property: Any designs, tools, patterns, materials, drawings, confidential information or equipment furnished by Buyer or any other items which become Buyers property, may be considered obsolete and may be destroyed by Seller after two (2) consecutive years have elapsed without Buyer placing an order for the items which are manufactured using such property. Seller shall not be responsible for any loss or damage to such property while it is in Sellers possession or control. 9. Taxes: Unless otherwise indicated on the face hereof, all prices and charges are exclusive of excise, sales, use, property, occupational or like taxes which may be imposed by any taxing authority upon the manufacture, sale or delivery of the items sold hereunder. If any such taxes must be paid by Seller or if Seller is liable for the collection of such tax, the amount thereof shall be in addition to the amounts for the items sold. Buyer agrees to pay all such taxes or to reimburse Seller therefore upon receipt of its invoice. If Buyer claims exemption from any sales, use or other tax imposed by any taxing authority, Buyer shall save Seller harmless from and against any such tax, together with any interest or penalties thereon which may be assessed if the items are held to be taxable. 10. Indemnity For Infringement of Intellectual Property Rights: Seller shall have no liability for infringement of any patents, trademarks, copyrights, trade dress, trade secrets or similar rights except as provided in this Part 10. Seller will defend and indemnify Buyer against allegations of infringement of U.S. patents, U.S. trademarks, copyrights, trade dress and trade secrets (hereinafter Intellectual Property Rights). Seller will defend at its expense and will pay the cost of any settlement or damages awarded in an action brought against Buyer based on an allegation that an item sold pursuant to this contract infringes the Intellectual Property Rights of a third party. Sellers obligation to defend and indemnify Buyer is contingent on Buyer notifying Seller within ten (10) days after Buyer becomes aware of such allegations of infringement, and Seller having sole control over the defense of any allegations or actions including all negotiations for settlement or compromise. If an item sold hereunder is subject to a claim that it infringes the Intellectual Property Rights of a third party, Seller may, at its sole expense and option, procure for Buyer the right to continue using said item, replace or modify said time so as to make it noninfringing, or offer to accept return of said item and return the purchase price less a reasonable allowance for depreciation. Notwithstanding the foregoing Seller shall have no liability for claims of infringement based on information provided by Buyer, or directed to items delivered hereunder for which the designs are specified in whole or part by Buyer, or infringements resulting from the modification, combination or use in a system of any item sold hereunder. The foregoing provisions of this Part 10 shall constitute Sellers sole and exclusive liability and Buyers sole and exclusive remedy for infringement of Intellectual Property Rights. If a claim is based on information provided by Buyer or if the design for an item delivered hereunder is specified in whole or in part by Buyer, Buyer shall defend and indemnify Seller for all costs, expenses or judgments resulting from any claim that such item infringes any patent, trademark, copyright, trade dress, trade secret or any similar right. 11. Force Majeure: Seller does not assume the risk of and shall not be liable for delay or failure to perform any of Sellers obligations by reason of circumstances beyond the reasonable control of Seller (hereinafter Events of Force Majeure). Events of Force Majeure shall include without limitation, accidents, acts of God, strikes or labor disputes, acts, laws, rules or regulations of any government or government agency, fires, floods, delays or failures in delivery of carriers or suppliers, shortages of materials and any other cause beyond Sellers control. 12. Entire Agreement/Governing Law: The terms and conditions set forth herein, together with any amendments, modifications and any different terms or conditions expressly accepted by Seller in writing, shall constitute the entire Agreement concerning the items sold, and there are no oral or other representations or agreements which pertain thereto. This Agreement shall be governed in all respects by the law of the State of Ohio. No actions arising out of the sale of the items sold hereunder or this Agreement may be brought by either party more than two (2) years after the cause of action accrues.
24
Parker Hannifin Corporation 6035 Parkland Blvd. Cleveland, Ohio 44124-4141 Telephone: (216) 896-3000 Fax: (216) 896-4000 Web site: www.parker.com
About Parker Hannifin Corporation Parker Hannifin is a leading global motion-control company dedicated to delivering premier customer service. A Fortune 500 corporation listed on the New York Stock Exchange (PH), our components and systems comprise over 1,400 product lines that control motion in some 1,000 industrial and aerospace markets. Parker is the only manufacturer to offer its customers a choice of hydraulic, pneumatic, and electromechanical motion-control solutions. Our Company has the largest distribution network in its field, with over 7,500 distributors serving more than 350,000 customers worldwide.
Parkers Charter To be a leading worldwide manufacturer of components and systems for the builders and users of durable goods. More specifically, we will design, market and manufacture products controlling motion, flow and pressure. We will achieve profitable growth through premier customer service. Product Information North American customers seeking product information, the location of a nearby distributor, or repair services will receive prompt attention by calling the Parker Product Information Center at our toll-free number: 1-800-C-PARKER (1-800-272-7537). In the UK, a similar service is available by calling 0500-103-203.
The Climate & Industrial Controls Group designs, manufactures and markets system-control and fluid-handling components and systems to refrigeration, air-conditioning and industrial customers worldwide.
The Aerospace Group is a leader in the development, design, manufacture and servicing of control systems and components for aerospace and related high-technology markets, while achieving growth through premier customer service.
The Fluid Connectors Group designs, manufactures and markets rigid and flexible connectors, and associated products used in pneumatic and fluid systems.
The Seal Group designs, manufactures and distributes industrial and commercial sealing devices and related products by providing superior quality and total customer satisfaction.
The Hydraulics Group designs, produces and markets a full spectrum of hydraulic compnents and systems to builders and users of industrial and mobile machinery and equipment.
The Filtration Group designs, manufactures and markets quality filtration and clarification products, providing customers with the best value, quality, technical support, and global availability.
The Automation Group is a leading supplier of pneu-matic and electromechanical components and systems to automation customers worldwide.
The Instrumentation Group is a global leader in the design, manufacture and distribution of highquality critical flow components for worldwide processinstrumentation, ultra-high-purity, medical and analytical applications.
25
Parker Hannifin Corporation Gear Pump Division 1775 Logan Avenue Youngstown, OH 44501 USA Tel: (330) 746-8011 Fax: (330) 746-1148 http://www.parker.com/gearpump