Documente Academic
Documente Profesional
Documente Cultură
com
KA5H0380R/KA5M0380R/KA5L0380R
SPS
Features
Precision fixed operating frequency (100/67/50kHz) Low start-up current(typ. 100uA) Pulse by pulse current limiting Over current protection Over voltage protecton (Min. 25V) Internal thermal shutdown function Under voltage lockout Internal high voltage sense FET Auto-restart mode
Description
The SPS product family is specially designed for an off-line SMPS with minimal external components. The SPS consist of high voltage power SenseFET and current mode PWM IC. Included PWM controller features integrated fixed frequency oscillator, under voltage lock-out, leading edge blanking, optimized gate turn-on/turn-off driver, thermal shutdown protection, over voltage protection, and temperature compensated precision current sources for loopcompensation and fault protection circuitry. Compared to discrete MOSFET and PWM controller or RCC solution, a SPS can reduce total component count, design size, weight and at the same time increase efficiency, productivity, and system reliability. It has a basic platform well suited for cost-effective design in either a flyback converter or a forward converter.
TO-220F-4L
INTERNAL BIAS
DRAIN SFET
FB
Rsens S R Q
7.5V
GND
27V
+ _
Rev. .5.0
2000 Fairchild Semiconductor International
KA5H0380R/KA5M0380R/KA5L0380R
Value 800 800 30 12 95 10 3.0 2.1 30 0.3 to VSD 35 0.28 25 to +85 55 to +150
Drain-Gate voltage (RGS=1M) Gate-source (GND) voltage Drain current pulsed Avalanche current (4) Continuous drain current (TC=25C) Continuous drain current (TC=100C) Supply voltage Analog input voltage range Total power dissipation Operating temperature Storage temperature
(2)
Notes: 1. Tj=25C to 150C 2. Repetitive rating: Pulse width limited by maximum junction temperature 3. L=51mH, starting Tj=25C 4. L=13H, starting Tj=25C
KA5H0380R/KA5M0380R/KA5L0380R
IDSS
Static drain-source on resistance (note) Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Turn on delay time Rise time Turn off delay time Fall time Total gate charge (gate-source+gate-drain) Gate-source charge Gate-drain (Miller) charge
Note: Pulse test: Pulse width < 300S, duty < 2% 1 S = --R
(note)
KA5H0380R/KA5M0380R/KA5L0380R
Symbol
Min.
Typ.
Max.
Unit
Vref Vref/T
4.80
5.00 0.3
5.20 0.6
V mV/C
OSCILLATOR SECTION Initial accuracy Initial accuracy Initial accuracy Frequency change with temperature (2) PWM SECTION Maximum duty cycle Maximum duty cycle FEEDBACK SECTION Feedback source current Shutdown delay current IFB Idelay Ta=25C, 0V<Vfb<3V Ta=25C, 5VVfbVSD 0.7 4 0.9 5 1.1 6 mA A Dmax Dmax KA5H0380R KA5M0380R KA5L0380R 62 72 67 77 72 82 % % FOSC FOSC FOSC KA5H0380R KA5M0380R KA5L0380R 25CTa+85C 90 61 45 100 67 50 5 110 73 55 10 kHz kHz kHz %
OVER CURRENT PROTECTION SECTION Over current protection UVLO SECTION Start threshold voltage Minimum operating voltage TOTAL STANDBY CURRENT SECTION Start current Operating supply current (control part only) SHUTDOWN SECTION Shutdown Feedback voltage Thermal shutdown temperature (Tj) Over voltage protection
(1)
IL(max)
1.89
2.15
2.41
Vth(H) Vth(L)
8.4 14
9 15
9.6 16
V V
IST IOPR
VCC=14V VCC<28
0.1 7
0.17 12
mA mA
Vfb>6.5V VCC>24V
6.9 140 25
7.5 160 27
8.1 29
V C V
NOTE: 1. These parameters, although guaranteed, are not 100% tested in production 2. These parameters, although guaranteed, are tested in EDS(water test) process
KA5H0380R/KA5M0380R/KA5L0380R
101 VGS Top: 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V Bottom:4.5V 100
101
100 150oC
25oC
-25oC
8 7
Drain-Source On-Resistance
6 5 4 3 2 1 0 Vgs=20V
Vgs=10V
RDS(on) , [" ]
150oC
25oC
1.0
ID,Drain Current
10 VDS=160V
VGS,Gate-Source Voltage[V]
Capacitance [pF]
Ciss
Coss Crss
101
2 @Note : ID=3.0A 0
10
15
20
25
30
KA5H0380R/KA5M0380R/KA5L0380R
1.2
2.5
2.0 1.1
Drain-Source On-Resistance
BVDSS, (Normalized)
RDS(on), (Normalized)
1.5
1.0
1.0
0.9
0.5
0.8
-50
50
100
150
0.0
-50
50
100
150
3.5
3.0 2.5
10-1
10
-2
101
102
40
60
80
100
120
140
Thermal Response
100 D=0.5 0.2 0.1 10- 1 0.05 0.02 0.01 @ Notes : 1. Z J C (t)=1.25 o C/W Max. 2. Duty Factor, D=t1 /t2 3. TJ M -TC =PD M *Z J C (t)
Z J C(t) ,
single pulse
10- 2 - 5 10
10- 4
10- 3
10- 2
10- 1
100
101
[sec]
KA5H0380R/KA5M0380R/KA5L0380R
25
50
75
100
125 150
1.1 1.05
Ipeak 1
0.95 0.9 0.85 0 25 50 75 100 125 150 0.8 -25 0 25 50 75 100 125 150
1.5 1.3
Istart
Vstart 1
0.95 0.9 0 25 50 75 100 125 150 0.85 -25 0 25 50 75 100 125 150
KA5H0380R/KA5M0380R/KA5L0380R
Vstop 1
0.95 0.9 0.85 -25 0 25 50 75 100 125 150
Dmax 1
0.95 0.9 0.85 -25 0 25 50 75 100 125 150
Vsd 1
0.95 0.9 0 25 50 75 100 125 150 0.85 -25 0 25 50 75 100 125 150
Vovp 1
0.95 0.9 0 25 50 75 100 125 150 0.85 -25 0 25 50 75 100 125 150
KA5H0380R/KA5M0380R/KA5L0380R
Vss
1 0.9
Rdson 1
0.5 0 25 50 75 100 125 150 0 -25 0 25 50 75 100 125 150
KA5H0380R/KA5M0380R/KA5L0380R
Package Dimensions
TO-220F-4L
10
KA5H0380R/KA5M0380R/KA5L0380R
TO-220F-4L (Forming)
11
KA5H0380R/KA5M0380R/KA5L0380R
Ordering Information
Product Number KA5H0380R-TU KA5H0380R-YDTU KA5M0380R-TU KA5M0380R-YDTU KA5L0380R-TU KA5L0380R-YDTU
TU : Non forming Type YDTU :forming Type
12
KA5H0380R/KA5M0380R/KA5L0380R
13
KA5H0380R/KA5M0380R/KA5L0380R
LIFE SUPPORT POLICY FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR INTERNATIONAL. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user.
www.fairchildsemi.com 7/24/00 0.0m 001 Stock#DSxxxxxxxx 2000 Fairchild Semiconductor International
2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.