Documente Academic
Documente Profesional
Documente Cultură
2
4 6
Index
Factories Locations
General Overview
8
9 11
12
13 15 19 23
Bend 45 Bend 90 Tee Branch Intersection Vertical 90 Outside Riser Vertical 90 Inside Riser Adjustable Riser Reducer Add-on Branch
27
28 29 30 31 32 33 34 35 36
Connector Barrier Strip, Joint Plate, Crimping Type Copper End Plate, Drop Out Plate Cable Tray Cover Framing System Accessories
37
38 39 40 41
43
44 45 47
50
51 52 54 56 58
60
61 62
Introduction
-Factories -Locations
www.unimetal-ikk.com
Specialized Factory for Steel Products (Jeddah/KSA) Sigma Factory for Steel Products (Ajman & Umm Al Quwain /UAE) Specialized Factory for Steel Products (6th of October/Egypt) Specialized Factory for Steel Products (Amman/Jordan) Uni-Metal cable trays and accessories from SFSP are manufactured in compliance with : - NEMA VE 12009 - NEMA VE 22006 - IEC 61537 - BS EN 61537:2007 - BS 5750/BS EN 10130 - BS EN 10131 - BS EN 10051 - CENELEC EN 50173-1 - EIA/ITA 568 A - ISO/IEC 11801; 2002. Cable Trays are designed to meet most requirements of cable and electrical wire installations and comply to local and international standards of fabrication and finishing. This catalogue is designed to be helpful to engineers and contractors in the application and selection of tray products for construction and maintenance. If a unique application requires a special product not included in this catalogue , SFSP engineering personnel are ready to furnish design consultation and realistic cost estimates. In addition, know-how are available for your convenience.
www.sfsp-ikk.com
www.unimetal-ikk.com 3
Factories
SFSP- Saudi Arabia
Specialized Factory for Steel Products Jeddah - Saudi Arabia Tel : +966 2 637 4482 Fax: +966 2 636 1963 sfsp.jeddah@ikkgroup.com
SFSP- EGYPT
Specialized Factory for Steel Products 6th of October, Cairo - Egypt Tel : +20 2 3831 2477 Fax: +20 2 3831 1036 sfsp.cairo@ikkgroup.com
SFSP- JORDAN
Specialized Factory for Steel Products Amman, Jordan Tel : +962 6 416 4216 Fax: +962 6 416 4217 sfsp.amman@ikkgroup.com
SFSP -
www.sfsp-ikk.com
www.sfsp-ikk.com
SYRIA
LEBANON
Amman
IRAQ
IRAN
JORDAN
6th of October
Cairo
KUWAIT
EGYPT Bahrain
Umm Al Quwain
QATAR
UAE
Ajman
SUDAN
YEMEN
A OM
www.ikkgroup.com
DJIBOUTI
www.unimetal-ikk.com
O/SF/GLO/LT/730/3 26-06-2008
SFSP is a leading manufacturer and fabricator of steel and aluminum products used for the support of equipment for industrial, commercial, utility and OEM installations. Our customers have access to the most complete support systems offered in the industry including metal framings, cable trays, pipe hangers, slotted angles, fasteners and others. (Our factory is equipped with an in-house hot dip galvanization facility) .
www.unimetal-ikk.com 5
Uni-Metal trades in-house produced steel construction products, all designed and manufactured in SFSP plants located in KSA,UAE,Egypt and Jordan.
S ALE S SAudi ARABiA JEDDAH
Tel :+966 2 627 8222 Fax: +966 2 627 8722 unitech.ksa@ikkgroup.com
MAd inAh
Tel : +966 4 864 9111 Fax: +966 4 813 2254 unitech.ksa@ikkgroup.com
YAnBu
Tel : +966 4 390 1499 Fax: +966 4 322 7101 unitech.ksa@ikkgroup.com
Norway
Russia
Denmark
Lithuania
Ireland
Belarus
Germany
Stuttgart Czech Rep
Poland
Astana
Slovakia Ukraine Maldova Romania Croatia Serbia Bulgaria
France
Switzerland
Austria
Hungary
Kazakhstan
Mongolia
Istanbul
Georgia
Greece
Turkey
Armenia
Baku Azerbaijan
Uzbekistan
Kyrgyzstan
Turkmenistan
Ashgabat
TUNISIA
Tanger
Tajikistan
Oran Algeria
Malta
Beirut
SYRIA
Irbil
Kabol
Casablanka
LEBANON
MOROCCO
Tripoli
Banghazi
IRAQ
KUWAIT
Kuwait
Tehran
Afghanistan
China
ALGERIA
Cairo
Aqaba Tabuk
Skakah
IRAN
BAHRAIN
Manama
Pakistan Nepal
LIBYA
6th of October
EGYPT
Yanbu
Hail Qassim
Ma dinah
QATAR
Jeddah
Al Kharj
Hufuf
Musaffah
Ajman
UAE
Jebel Ali
SAUDI ARABIA
Najran
Muscat
SUDAN
Salalah
Eritrea
Guinea
Sanaa
Adan
YE
ME
OM
Khamis Mushayt
AN
Thailand
Cambo
Ghana
Benin
Nigeria
Abuja
Cameroon
Equatorial Guinea
Ethiopia
Somalia
Sri Lanka
Hatyai
Malaysia
Muqdisho
Gabon
Bata Libreville
Uganda
Congo
Kenya
Indo
Angola
Zambia
Malawi
Mozambique Zimbabwe
Namibia
Windhoek
Botswana
Gaborone
South Africa
2010
www.unimetal-ikk.com
KhAMis MushAYT
Tel : +966 7 237 5929 Fax: +966 7 237 8783 unitech.ksa@ikkgroup.com
BAhA
Tel : +966 7 237 5929 Fax: +966 7 237 8783 unitech.ksa@ikkgroup.com
NAjRAn
Tel : +966 7 321 4038 Fax: +966 7 321 4035 unitech.ksa@ikkgroup.com
GiZAn
Tel : +966 7 321 6660 Fax: +966 7 321 0665 unitech.ksa@ikkgroup.com
RiYAdh
Tel : +966 1 454 9282 Fax: +966 1 456 6627 unitech.ksa@ikkgroup.com
TABuk
Tel : +966 4 422 6414 Fax: +966 4 422 6414 unitech.ksa@ikkgroup.com
AL KhARj
Tel : +966 1 540 9982 Fax: +966 1 540 3130 unitech.ksa@ikkgroup.com
QAssiM
Tel : +966 6 385 2186 Fax: +966 6 382 3946 unitech.ksa@ikkgroup.com
HAfAR AL BATin
Tel : +966 3 721 5915 Fax: +966 3 721 5915 unitech.ksa@ikkgroup.com
SkAkAh / Qurayyat
Tel : +966 4 626 3904 Fax: +966 4 626 3904 unitech.ksa@ikkgroup.com
HAiL
Tel : +966 6 543 3931 Fax: +966 6 543 3935 unitech.ksa@ikkgroup.com
DAMMAM
Tel : +966 3 859 0097 Fax: +966 3 857 8177 unitech.ksa@ikkgroup.com
DAMMAM Showroom
Tel : +966 3 834 9300 Fax: +966 3 834 9457 unitech.ksa@ikkgroup.com
JuBAiL
Tel : +966 3 361 4390 Fax: +966 3 361 4499 unitech.ksa@ikkgroup.com
Hufuf
Tel : +966 3 586 9732 Fax: +966 3 584 5966 unitech.ksa@ikkgroup.com
Korea Japan
BAHRAIN MANAMA
Tel : +973 175 64386 Fax: +973 175 64315 unitech.bahrain@ikkgroup.com
DUBAI / Al Rashidiyah
Tel : +971 4 285 6031 Fax : +971 4 286 2941 unitech.uae@ikkgroup.com
Yiwu
Taiwan
SHARJAH
Tel : +971 6 534 4092 Fax: +971 6 534 8949 unitech.uae@ikkgroup.com
QATAR
Philippines
LEBANON BEIRUT
Tel : +961 1 858 277 Fax: +961 1 858 276 unitech.lebanon@ikkgroup.com
JORDAN AMMAN
Tel : +962 6 556 3030 Fax: +962 6 554 7911 unitech.jordan@ikkgroup.com
odia Vietnam
DOHA
Tel : +974 451 3301/2/3 Fax: +974 451 3305 unitech.qatar@ikkgroup.com
onesia
New Guinea
LIBYA TRIPOLI
Tel : +218 21 719 9384 Fax: +218 21 717 0264 unitech.libya@ikkgroup.com
OMAN MuscAT
Tel : + 968 24 59 1006 fax : + 968 24 59 7006 unitech.oman@ikkgroup.com
KUWAIT AL SALEhiYAh
Tel : + 965 22 459 984 Fax: + 965 22 459 985 unitech.kuwait@ikkgroup.com
EGYPT CAIRO
Tel:+20 2 346 8566 Fax:+20 2 346 8567 unitech.egypt@ikkgroup.com
GHOMHOURIYA STREET
Tel : +20 2 787 2152 Fax: +20 2 593 1053 unitech.egypt@ikkgroup.com
Australia
Sydney
New Zealand
MAnAging OfficE
LEBANON
GERMANY
BEIRUT
www.unimetal-ikk.com 7
CHINA - Yiwu
General Overview
-Types Overview -Materials & Finishes -Technical Data
General Overview
- MATERIAL THICKNESS 1.00 mm 1.20 mm 1.50 mm 2.00 mm Medium Duty - Cable Tray System MCT - 120
Thickness Side Height Length Width : 1.20 mm : 25 ,50 ,75 and 100 mm : 2440 mm / 3000 mm : 50 - 1000 mm
All illustrations, drawings and descriptive material in this publication are of a generally informative nature only, and do not form a complete package of the specifications or description of the goods . Most of the dimensions shown are nominal . Uni-Metal can make modifications and design, materials or finishes as it deems necessary or desirable .
. . . . .
Straight Return Flange Inside Return Flange Outside C-Type Inside C-Type Outside
- SHAPES OF ACCESSORIES
Cornered
Curved
- TYPES OF PERFORATION
Staggered
Serial
15
- DIMENSIONS
15
Oblong holes 7 x 32
25 25
H
W
25 25
Oblong holes 7 x 32
7
25 25
10
25 25
32
Stainless Steel
F.Austenitic Stainless Steels AISI 304 & 316, As per: ASTM A 240 /EN 10088-2/ DIN 17400 / BS 1449:2 / ASTM A480 / ASTM A666 / ISO 3506 / EN 10028-7 /JIS G 4304 F.1 Stainless Steel Fasteners EN 3506 F.2 Stainless Steel Wire BS 1554 ,ASTM A276
Aluminium FinishEs
1- HotDIP Galvanization After Fabrication As per: ASTM A 123 / ASTM A 153 / ISO 1461. BS 729 / DIN 50976
www.unimetal-ikk.com 11
2- Zinc Electroplating After Fabrication As per: ASTM B633 / EN 12329 / ISO 4042/ BS 1706 / BS 3382 / DIN 50961 3- Powder Coating Epoxy / Polyester / Epoxy & Polyester BS 3900 / ISO 2409 / ISO 1519 / ISO 1520
12
www.unimetal-ikk.com
Width
(mm)
Order Example
Item (h) (w) (t) type
50 100
50
Order Example: LCT25 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
50 32 32
www.unimetal-ikk.com 13
50 W
25 25
25
25
25 32 7
25
Width
(mm)
25
Order Example
Item (h) (w) (t) type
50 100
32
Order Example: LCT50 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
14
www.unimetal-ikk.com
Load kN/m 0.77 0.44 0.22 0.08 0.90 0.55 0.27 0.10 0.92 0.61 0.30 0.11 0.93 0.64 0.32 0.12 0.93 0.64 0.32 0.12 0.48 0.32 0.19 0.09 0.24 0.15 0.08 . 0.17 0.11 . .
50 25 L
25 W
50
32
32
Order Example
MCT25 025 0050 2 RFI MCT25 025 0100 2 RFI
50 100
Order Example: MCT25 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
www.unimetal-ikk.com 15
Item
(h)
50 W
25 25
25
25
25 32 7
Width
(mm)
Order Example
Item (h) (w) (t) type
25
25
50 100
32
Order Example: MCT50 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
16
www.unimetal-ikk.com
W
W
Width
(mm)
Order Example
Item (h) (w) (t) type
25 25
25 25
100 150
Order Example: MCT75 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
25
25
25
25
32
www.unimetal-ikk.com 17
32
25
Width
(mm)
Order Example
Item (h) (w) (t) type
25 25 25
25 25 32 25 25 7
100 150
Order Example: MCT100 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
32
18
www.unimetal-ikk.com
25 25 W
50 32 50 7
32
Order Example
HCT25 0025 0100 3 RFI HCT25 0025 0150 3 RFI
100 150
Order Example: HCT25 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
www.unimetal-ikk.com 19
HCT 600 - 25
1.00
Item
(h)
50 W
25 25
32
Order Example
Item (h) (w) (t) type
50 100
Order Example: HCT50 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
20
www.unimetal-ikk.com
Width
(mm)
Order Example
Item (h) (w) (t) type
100 150
Order Example: HCT75 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
25
25
width 700 mm
www.unimetal-ikk.com 21
1.00
0.94
32
100
Order Example
Item (h) (w) (t) type
Order Example: HCT100 - Side height (h) - Width(w) - Thickness - Side type 32 for more ordering details, please check pages (61-62) 7
22
www.unimetal-ikk.com
50 32
Width
(mm)
Order Example
Item (h) (w) (t) type
Order Example: VCT25 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
www.unimetal-ikk.com 23
50 100
50 W
Cable tray
25 25
Load kN/m 0.80 0.50 0.28 0.10 0.58 0.36 0.18 X 0.43 0.25 0.10 X
Width
(mm)
Order Example
Item (h) (w) (t) type
50 100
Order Example: VCT50 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
24
75 W
Load kN/m 1.30 0.86 0.50 0.21 1.01 0.65 0.36 0.13
VCT 1000 - 75
25
25
32
Order Example
Item (h) (w) (t) type
50 100
Order Example: VCT75 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
www.unimetal-ikk.com 25
100
25 25
25 25
25 25
25 32 25 32
Order Example
Item (h) (w) (t) type
100 150
Order Example: VCT100 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
26
www.unimetal-ikk.com
27
160 161
Width
(mm)
Order Example
Item (h) (w) (t) type
50 100
Order Example: 160 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
170
171
Radius r = 200 mm
Width
(mm)
Order Example
Item (h) (w) (t) type
50 100
Order Example: 170 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
28
240
241
242
Width
(mm)
Order Example
Item (h) (w) (t) type
50 100
Order Example: 240 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
250
251
Cornered/Short
www.unimetal-ikk.com 29
Radius r = 200 mm
Width
(mm)
Order Example
Item (h) (w) (t) type
50 100
250T
o
251T
Order Example: 250 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
For this type, all specifications are the same as other bend 90 types. Order No. shall be the same as curved type,but add the letter T . ex: 250 050 0050 2 ; Curved type 250T 050 0050 2 ; Cornered/Short type
320
321
322
Width
(mm)
Order Example
Item (h) (w) (t) type
50 100
Order Example: 320 - Side height (h) - Width (w) - Thickness (t) - Side type for more ordering details, please check pages (61-62)
330
Width
(mm)
331
Order Example
Item (h) (w) (t) type
50 100
Order Example: 330 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
Radius r = 200 mm
www.unimetal-ikk.com
30
- Intersection - cornered
400 - 401
400
401
Width
(mm)
Order Example
Item (h) (w) (t) type
50 100
Order Example: 400 - Side height (h) - Width(w) - Thickness - Side type for more ordering details, please check pages (61-62)
- Intersection - curved
410 - 411
410
Width
(mm)
411
Order Example
Item (h) (w) (t) type
50 100
Order Example: 410 - Side height (h) - Width (w) - Thickness (t) - Side type for more ordering details, please check pages (61-62)
Radius r = 200 mm
www.unimetal-ikk.com 31
480 481
Width
(mm)
482
Order Example
Item (h) (w) (t) type
50 100
Order Example: 480 - Side height (h) - Width (w) - Thickness (t) - Side type for more ordering details, please check pages (61-62)
Width
(mm)
Order Example
Item (h) (w) (t) type
50 100
Radius r = 200 mm
Order Example: 490 - Side height (h) - Width (w) - Thickness (t) - Side type for more ordering details, please check pages (61-62)
32
www.unimetal-ikk.com
560 561
Width
(mm)
562
Order Example
Item (h) (w) (t) type
50 100
Order Example: 560 - Side height (h) - Width (w) - Thickness (t) - Side type for more ordering details, please check pages (61-62)
Width
(mm)
Order Example
Item (h) (w) (t) type
50 100
Radius r = 200 mm
Order Example: 570 - Side height (h) - Width (w) - Thickness (t) - Side type for more ordering details, please check pages (61-62)
www.unimetal-ikk.com 33
- Adjustable riser
640
Width
(mm)
Order Example
Item (h) (w) (t) type (L) (r)
50 100
640 050 0050 2 STR 3000 /45 640 050 0100 2 STR 3000 /45
Order Example: 640 - Side height (h) - Width (w) - Thickness (t) - Side type - Length (L) - Angle (r) for more ordering details, please check pages (61-62)
- Custom risers
For inquiries, use same code as adjustable risers and add the angle desired at the end, ex: for custom riser 45 angle 640 050 0300 4 STR 3000/45 for custom riser 60 angle 660 050 0300 4 STR 3000/60
45
60
Angle: 45
Angle: 60
- Reducer - central
680-681
681
W2
680
Width
(mm)
Order Example
Item (h) (w1) (w2) (t) type
50 100
680 050 0300 050 2 RFI 681 050 0400 050 2 RFI
h
Order Example: 680 - Side height (h) - Width (w1) - Width (w2)- Thickness (t) - Side type for more ordering details, please check pages (61-62)
W1
34
- Right side
690 - 691
690 691
Width
(mm)
Order Example
Item (h) (w1) (w2) (t) type
50 100
690 050 0300 050 2 RFI 691 050 0400 050 2 RFI
Order Example: 690 - Side height (h) - Width (w1) - Width (w2)- Thickness (t) - Side type for more ordering details, please check pages (61-62)
- Left side
700 - 701
700 701
Width
(mm)
Order Example
Item (h) (w1) (w2) (t) type
50 100
700 050 0300 050 2 RFI 701 050 0400 050 2 RFI
Order Example: 700 - Side height (h) - Width (w1) - Width (w2)- Thickness (t) - Side type for more ordering details, please check pages (61-62)
www.unimetal-ikk.com 35
Width
(mm)
Order Example
Item (h) (w) (t) type
50 100
Order Example: 800 - Side height (h) - Width (w) - Thickness (t) - Side type for more ordering details, please check pages (61-62)
Width
(mm)
Order Example
Item (h) (w) (t) type
50 100
Order Example: 810 - Side height (h) - Width (w) - Thickness (t) - Side type for more ordering details, please check pages (61-62)
36
www.unimetal-ikk.com
37
240
240
- Straight connector
1000
h
Order Example
240
h
Item (h) (t)
240
1000
h
- Angle connector
1010/1020
20
240
240
240
h
h 20
20
50
Width
(mm)
20
Width
(mm)
Order Example: 240 1010 - Side height (h) - Width (w) - Thickness (t) 240 for more ordering details, please check pages (61-62)
h
240
50
Order Example: 1020 - Side height (h) - Width (w) - Thickness (t) for more ordering details, please check pages (61-62)
- Adjustable connector
50
1030/1040
50
120
50
120
For M6 Bolt
h
1030
7 x 38 for M6 Bolt
Order Example
Item (h) (t)
1030 050 2
Order Example: 1030 - Side height (h) - Thickness (t) for more ordering details, please check pages (61-62)
1040
Order Example
Item (h) (t)
1040 050 2
Order Example: 1040 - Side height (h) - Thickness (t) for more ordering details, please check pages (61-62)
38
www.unimetal-ikk.com
- Wrap-over connector
1050
- Corner connector
1060
- Barrier strip
1070
Available Lengths: 2440 / 3000 mm
240
150 240
50
25
1070
1050
1060
- End plate
1100
- Drop-out plate
1110
W
W= w min
1080
us
1100
7m
1110
Size
mm
2
Dimensions (mm) J 50 100 150 h 200 50 100 150 200 100 150 200 250 300 100 150 200 250 300 E1 6 6 6 6 6 6 6 6 8.5 8.5 8.5 8.5 8.5 10 10 10 10 10 E2 6 6 6 6 6 6 6 6 8.5 8.5 8.5 8.5 8.5 10 10 10 10 10
Current rating AMP 50 50 50 50 90 90 90 90 125 125 125 125 125 160 160 160 160 160
Cable
mm
2
Stud Hole 6.5 6.5 8.4 6.5 8.4 6.5 8.4 6.5 8.4 6.5 8.4 8.4 6.5 8.4
Dimensions (mm) A 1.8 2.4 2.4 3.1 3.1 3.8 3.8 4.5 4.5 5.4 5.4 6 6.8 6.8 C 3.7 4 4.2 4.8 5.0 5.5 5.5 6.2 6.2 7.1 7.1 7.7 8.8 8.8 D 10 10 12 10 12 10 12 11 12 12 12 12 13 13 G 4 5 6 5 6 5 6 6 6 7 7 7 7 7 H 6 6 9 6 9 6 9 7 9 7 7 7 7 7 B 6 8 8 8 8 10 10 10 10 12 12 12 12 12 J 18 21 26 21 26 24 28 26 28 30 30 32 30 30
1.5 2.5 4
10
16
6 10 16 20 25
25
www.unimetal-ikk.com 39
- Ventilated cover
2010
Width
(mm)
Order Example
Item Type (w) (t)
50
Order Example: 2000 - Type - Width (w) - Thickness (t) for more ordering details, please check pages (61-62)
- Cable Ladder covers are supplied with or without a 15 mm downturned flange. - Straight section covers are furnished 3000 mm long. All fitting covers are furnished in solid design only.
Locking clamp
Thickness: 2mm
2100
Covers Side Height Types : Solid without flange - (VOF) Solid with flange - (VWF)
Width
(mm)
Order Example
Item (w) (t)
50
2100 050 2
Order Example: 2100 - Width (w) - Thickness (t) for more ordering details, please check pages (61-62)
40
www.unimetal-ikk.com
9021
M 16
M 16
50
17
Thread - ZP
S
M 6 M 8 M 10
d M 12 D M 16
or ,Throught Anchor ....... Example: SRW - M 12 -DIN 115 or ,Throught Order Anchor ....... : TROrder Example -Order ZP - M 12 1000 Example: WA - ZP - M 12 - DIN 125
Load cap. Load cap. [kN] [kN] 2,2 2,2 4,0
d D cap. Zinc Plated Stainless Steel Thread D d [kN] [mm] Lengths Load for bolt - Stainless ZP for bolt Zinc Stainless Steel Zinc Plated [mm] [mm] cap. Plated steel Thread Thread ZP (mm) (mm) 1000 (mm)[mm] 2,2 M-6 [kN] 12 6,4 M 6 6.4 M6M 6 M 1000 M12 6 1000 4,0 1.6 2,2 M6 8 M6 M8M 8 M8 16 8.4 1000 1.6 16 8,4 M M 8 4,0 M 88 1000 6,4 M 10 1000 2 6,4 M 10 M10 M21 10 M10 21 M 10 10,5 M 10 10.5 1000 12,9 M 1212 M 1000 12 M M12 M12 24 13 12,92.5 M 12 13 M 12 1000 24 17,3 M 16 M 16 1000 17 17,3 3 M 16M16 30 M16 30 M 16 17 M 16 Order Example : TR - ZP - M 12 1000
Length Load
DIN
for bolt - ZP
M68 M M10
1,6 1,6 2
DIN
for bolt
Ds 228 2 M 24 2
4 3
s [mm] [mm]
22 (mm) (mm)
6.6 8.4 224 2 2.5
440
M 6 440 9021
9021 M 10
M 12
M 8 9021
2,5 3
d D
d D
9021 9021 M 16
M 12 440 440
9021
MM 10 10 M 12 M12 M 12 M12 M 16
M 12
M 8 M8
30
M12 50
M 12 17 37 3
50 M 16
45
13.5 13 17
45 4
337 350
Order Example: SRW - MWA 12 - DIN 9021 Order Example: - ZP - M 12 - DIN 9021
axbxd H.D. Galvanised Stainless Steel a x b x d H.D. Galvanised Steel for Bolts - HDG Stainless for Bolts [mm] for Bolts - HDG for Bolts [mm] 40 x 40 x 5 M 10 M 10 d 40 M 10 SM 40 x x 40 40 x x5 5 M 12 M 10 12S Zincd Plated Stainless Steel EN DIN b 40 x 40 x 5 axbxd 12 M 12 Dimension- ZP M Dimension 40 x 40 x 5 M 16 M 16 d H.D. Glavanized Stainless Steel [mm] [mm] b 40 x 40 x 5 M 16 M 16 for Bolt for Bolt D M 6 x 12
M 6 x 25 M 8 x 25 M 8 dx 40 10 13 10 13
Dimension- ZP a
a
S
SM 6 40 x 40 x 6 M 10 Stainless M12 M16 40 x 40 x (4-5-6) M 10 dx 20 EN DIN 40 M 10 40 x x 40 40 x x6 6 M 12 b M 10 x 30 M 10 x 30 Order Example: SSW 41/41 - M 12 - d Dimension d [mm] [mm] 40 x 40 x 6 M 12 M 12 b M 10 x 45 M 10 x 45
17 16
M M 6 M 6 M 10 Steel M M 10 12
8 x 25
M6
M10 S
M 6
(mm) 30 M 16 17 M 16 3 M10 40 x 40 x (4-5-6) Order Example: WA - ZP - M 12 - DIN 125 40 x 40 x 6 M 6 M 6 M12 40 x 4040 x 40 x (4-5-6) x6
M 8
M 8
M 8
M 10 M 12 M 16
M 10 M 12 M 16
M 10 x 60 M Order 6 x 12Example: FR AMI NG STEM S ACC ESSORI ES SW 41/41 - HDG - M 12 10 10 M SY 10 x 70 SW 41/41 HDG M 12 Example: M Order 6 x 25 Fully Threaded Rods Grade 4.6 DIN 975 M 12 x 22 Threaded Rods, Hexagon Head Bol ts, Nuts, Washers
M 8 x 25
M 12 x 25 M 12 x 30
M 8 x 25
M 12 x 25
M 10 x 20 M 10 x 30 M 10 x 45 M 10 x 60 M 10 x 70 M 12 x 22 M 12 x 25
Zinc Plated
M6
M 12 x 13 30
13
Zinc Plated D
M6
d Length s
30 M8
M12 M16
M 8
1000
2.2 4.0
for bolt - ZP
M 6 M 8 M 10 M 12 M 12 M 16
(mm)
2 2
30-40
2000/3000
M 8 M 10 M 12 M 16
M8
30-40
M10 30
37 50
10,520-60 2,5 13 17 3 3
d D
Order Example TR -- ZP ZP M12 1000 Order Example : :HB - -M 1000 Order Example : STR -12 M 12
M 12 x 25 M 12 x 30
M 12 x 30 Roofing Bolts M 12 x 40 M 12 x 60 M 12 x 80
m
e
e S/m S/m Zinc Plated Stainless = electroplated, strength grade 4.6 M 12 x 40 gv Steel ISO DIN Thread - ZP Thread 19 18 [mm] [mm] ,strength grade 8.8 h.d. galvanised fv 8.8 = [mm] M 6 M 6
M 12 x 90
S
M 12 DimensionZP
- yelectroplated, Thread Size grade 8.8 gv 8.8 x = x-y xstrength -y xy = Stainless steel grade A4-50 A4-50 M 13/6,5 13/7,5 15,0 M 12 8 x 60 M 8 - Steel S235 ,Mgrade 4.6 ,M 4.8 8.8 6 6,4 6 and 12 1,6 (mm) (mm) (mm) (mm) S A4-70 = Stainless steel grade A4-70 17/ 8 16/ S M 10 M 10 9,5steel 19,6 16 M 8 M 8 = Stainless grade A4-50 Zinc Plated A4-50 Stainless Steel M 12 x 80 - Surface : plain , black , zinc plated 8,4 1,6 EN DIN Length M 12 10 - 50 - 80 21,9 12 - 120 16 - 150 19/10 10 18/12 Dimension [mm] [mm]grade A4-70 Stainless Order SRB 6 24/13 M 16 Example :A4-70 M 16 - M = 24/15,5steel 27,7 M 6 x 12 10 steel 10 grade A2-50 M 16 x 40 A2-50 = Stainless M 6 x 25
M 8 x 25 M 16 x 60
M410/ 5 M5 10/ 6
M6 11,5
M8
Zinc Plated Stainless Steel galvanised ,strength grade 8.8 fv 8.8 = h.d. for - ZP Materials : bolt low carbon steel , carbon steel for bolt = electroplated, strength grade 8.8 gv 8.8
[mm] [mm] [mm]
60 75 75 90 90
M 10 M 16
M 16 x 40 M 16 x 60 M 16 x 90
M 16 x 90 M 10 x 20
M 10 x 30 M 10 x 60
M 8 x 40
S. 53)
HCR
S. 53)
mm) 5 5 10
Thread - ZP
M 6 M 8 M 10 M 12 M 16
10 20 20 25 25
its is advisable to apply safty factor in consideration of the various ways of employment Example : HB - ZP -M 12 1000 M8 O its isOrder advisable to apply safty factor in consideration of the various 19/10 M 12 18/12 21,9 ways of employment
M [mm] [mm] 9.6 10.3 10 8 M 12 x 80 M6 8 M 12 x 80 E[mm] 17.5 12.2 25 19 M 12 x 90 M 8 17.5 12.2 25 19 MM 10 6 10/ 5 10/ 6 11,5 27.8 17.1 45 38 M 16 x 40 M 16 x 40 24 M 10 27.8 17.1 38 MM 12 M M 16 x 60 8 16 x 6045 13/7,5 15,0 40.5 25.3 75 13/6,5 M 12 M 16 x 90 M 16 x 90 40.5 25.3 75 17/ 8 16/ M 10 9,5 19,6
Shear
H.D. Glavanized
Grade 4.6
(E)
M5 M6 M8 M10 M16
Head (A) mm
12.0 15.1 18.3 21.44 34.14
Head (H) mm
3.0 3.70 4.50 5.30 8.74
= electroplated, strength Square Width Square Depth galvanised ,strength fv 8.8 = h.d. (O) mm (P) mm gv 8.8 = electroplated, strength g
gv
2419
M 16
M10 M16
9.86 5.56 Stainless steel grade A2A2-70 = Material & Finishes Codes 16.3 8.74
fv gv
[mm]
steel W1.4529 H
fv 8.8 = h.d. galvanised ,strength grade 8.8 gv 8.8 = electroplated, strength grade 8.8
10/ 5
www.unimetal-ikk.com 41
Yellow zinc plated M 12 x 25 Head M 12 x 25 Carriage Bolts with Nut DIN Type Below Steel Thread (Zn)603 Yellow zinc plated Type
M 12 x 30 M 12 x 30 Steel Thread Max Torque Pull (Zn) Shear S/m S/m M 12 x 40 M 12 x 40 (mm) Out Max Torque Pull Shear M 12 x 50 ISO DIN (mm) Out 9.6 10.3 10 M 12 x 60 M 12 x 60
Stainless Steel Stainless Steel Thread Max Torque Pull Shear Thread e (mm) Out
(1KN=100kg) (1KN=100kg)
M 12 x 90 M 16 x 40 M 16 x 60 M 16 x 40 M 16 x 60 24 24
Order Example : HB - ZPHead - M 12 Bol 1000 Threaded Rods, Hexagon ts, Nuts, Washers
Plated Hexagon Nuts DIN 934, DIN Zinc EN 24032 Hexagon nut (SHN) DIN 934 or ISO 4032 (= DIN EN 24032)
Length Load
M 8
M 8
1000
Stainless Steel cap. Thread Thread - ZP e S/m [kN] S/m [mm] Zinc Plated Stainless Steel ISO DIN 6 1000 Steel 2,2 M 6 Zinc Plated Thread Stainless Thread ThreadM - ZP Thread
[mm] M 6 M 10 M 8 M 12
M6 M 6 M 10 10/ 5 13/7,5 15,0 M8 M 8 M 12 13/6,5 1000 M8 12,9
M 10 M 16 M 12 M 16
M 10 M 16 M10
M12 M 12 M16 M 16
d D
22 fv 8.8 = h.d. galvanised 24 M 8 gv 8.8 = electroplated, 30 1 M 10 A4-50 = Stainless steel 45 1 A4-70 37 steel M 12 = Stainless
= Stainless steel
[mm] [m 12 16 21 24 30
10
M 6 x 12 M 6 x 25 M 8 x 25 M 8 x 40 M 10 x 20 M 10 x 30 M 10 x 45 M 10 x 60 M 10 x 70 M 12 x 22 M 12 x 25 M 12 x 30 M 12 x 40 M 12 x 50 M 12 x 60 M 12 x 80 M 12 x 90 M 16 x 40 M 16 x 90
13 M 10 x 30
M 10 x 45 17 16
17
16
M 12 x 25 M 12 x 30 M 12 x 40 M 12 x 60 18 M 12 x 80 M 16 x 40 M 16 x 60 24 24 19 18
19
M 16 x 90 24 24
M 16 x 90
= electroplated, stre
[mm]
10/ 6 M10 11,5 13/6,5 13/7,5 M12 15,0 17/ 8 16/ 9,5 M16 19,6 10/ 5 19/10 18/12 M20 21,9 24/13 24/15,5 27,7
Electroplated Thread
M10 M12 M16 Order Example: SHR - M 12
42
www.unimetal-ikk.com
43
- C-Channel Systems
Channel
Uni-metals framing channel is cold formed on modern rolling machines from low carbon steel strips. A continuous slot provides the ability to make attachments at any point.
Y Y Y Y
Z Z Z Y Y Y Y Y Y Y Z Z Z
Z Z
Y Y
Y Y
21.0 Y
Z Z Z Z
Y Z 41.0
41.0
Lengths
Standard length: 3000 mm with 3.2mm length tolerance. Custom lengths are available upon request.
Z 21.0 Y 21.0 ZY 21.0 Y
Z Z Z
Z Z
Z 41.0
Z Z
22.0 Z
Y Y Z 41.0Z 41.0 Y Y 7.0 41.0 41.0 Y Y 41.0 41.0
22.0
Y Y
21.0 Y
21.0
Z 41.0 Z 41.0
41.0
Z 41.0 Z 41.0 22.0
41.0
41.0 22.07.0
7.0
Thickness
1.5 mm 1.5 mm 2.0 mm 2.0 mm 2.5 mm 2.5 mm
21.0 21.0
Width W
41.0 mm 41.0 mm 41.0 mm 41.0 mm 41.0 mm 41.0 mm
22.0 22.0
22.0
7.0 41.0 41.0
7.0
7.0 7.0
7.0
41.0 7.0
7.0
22.0 22.0
7.0 7.0
22.0
7.0 7.0
82.0 82.0
CCH 320
Material Thickness 2 for 1.5 mm 3 for 2.0 mm 4 for 2.5 mm
0
Channel Patterns 0 - PT 1 - ST 2 - B2B
50 50
41.0
82.0
13
30
41.0 41.0
41.0 41.0
13 50 50 13 30
13 13
30 30
30
B2B Type
For more information on Uni-channel Systems , Uni-Metal technical staff will be ready to assist you with all necessary details. www.unimetal-ikk.com 44
www.unimetal-ikk.com
F1*
1.30 0.64 0.43 0.32 0.27 0.24 0.21 0.19
F2*
0.64 0.32 0.21 0.16 0.14 0.12 0.11 0.10
Fz**
5.13 5.13 5.13 5.13 5.13 5.13 5.13 5.13
F1 or F2 in KN
F1
F2
- CCH441 41x41x2.5
6.0 5.0
F1*
5.18 2.70 1.80 1.35 1.15 0.95 0.90 0.75
F2*
2.65 1.25 0.90 0.65 0.55 0.45 0.40 0.35
Fz**
8.8 8.8 8.8 8.8 8.8 8.8 8.8 8.8
F1 or F2 in KN
F1
F2
10
In the case of concrete support frame, use anchor M20 . In the case of concrete C-channel frame, use spring nut M16 . ** Connection force (pull-out force) : 8.8 (KN)
8.0 6.0 4.0
FD b
25
1/2
1/2
Length A (mm)
t Fv =F1 + F2
* Given Loads are always in [kN] Allowable characteristic live load
www.unimetal-ikk.com 45
Fz
2.0 0.0
h-50
25
F1
or
F2
A (mm)
150 300 450 600 700 800
F1 F2
F1*
3.10 1.50 1.00 0.80 0.66 0.57 0.51 0.46
F2*
1.50 0.80 0.51 0.38 0.33 0.29 0.26 0.23
Fz**
8.48 8.48 8.48 8.48 8.48 8.48 8.48 8.48
A
F1 / F2 in KN
900 1000
130
50
10
In the case of concrete support frame, use anchor M12. In the case of concrete C-channel frame, use spring nut M8. ** Connection force (pull-out force) : 8.48 (KN)
F1*
11.0 6.50 4.60 3.50 3.00 2.65 2.35 2.10
F2*
6.7 3.50 2.35 1.75 1.50 1.30 1.15 1.00
Fz**
14.7 14.7 14.7 14.7 14.7 14.7 14.7 14.7
A
F1 / F2 in KN
F1
F2
F1
or
F2
Fz
h-50
25
FD
25
t Fv =F1 + F2
1/2
1/2
Length A (mm)
* Given Loads are always in [kN] Allowable characteristic live load
46
www.unimetal-ikk.com
- U - Support
3000
25
200 140
U-Support with welded-on head plate 200 x 100 x 5mm 70
42
100 140
200 80
13x30
100
70
Order Example
13x30 3000 0200 5 25 13x30
Item (L) (t)
5
Order Example: 3000 - Length (L) - Thickness (t) for more ordering details, please check pages (61-62)
200 140 80
5
3000
13x30
25 13x30
42
- I - Support
3050
5
100
42
70
13x30
80
- Head Plate
3100
200 x 100 x 5mm
25
42
200 140 80
13x30
100
Order Example
Item (L) (t)
200 140
3050 0200 5
3100
100
42
13x30
70
13x30 25 13x30
80
5
Order Example: 3050 - Length (L) - Thickness (t) for more ordering details, please check pages (61-62)
3050
- Wall Bracket
3200 - 3250
for U-Support
42
80
for I-Support
5 mm thickness
3200
3250
Order Example
Item (L) (t)
3200 0210 5
Order Example: 3200 - Length (L) - Thickness (t) for more ordering details, please check pages (61-62)
47
- Support connectors
3300
- Clamping plates
3350
3300 0200 5
Order Example: 3300 - Length (L) - Thickness (t) for more ordering details, please check pages (61-62)
3350 0200 5
Order Example: 3350 - Length (L) - Thickness (t) for more ordering details, please check pages (61-62)
- Support plates
3400
3400
- Support clamps
3450
3450
- Clamping angles
3550
3550
- Angles
3600
3600
48
www.unimetal-ikk.com
49
Direction of Loading
The direction of the applied load shall be considered to determine the most appropriate anchor . The tension and shear components shall be lesser than the recommended load/design resistance in the direction concerned.
Fig.1 Fig.2
Fig.2
Tensile Loads
Tensile loads are applied along the axis of fixing (see Fig.1). Common examples include suspended ceiling applications and the suspension of mechanical services, pipework , ductwork ,etc ...
Fig.3
Fig.3
Shear Loads
Shear loads act at right angles to the axis of fixing and directly against the face of the structural material (see Fig.2). Shear performance is governed mainly by the shear strength of the bolt material and by the comperssive strength of the supporting substrate.
Fig.4
Fig.4
Offset Loads
Offset loads act at right angles to the fixing axis but are offset from the surface (see Fig.4). In this situation, the deflection of the bolt due to bending needs to be considered as well as the shear capacity of the anchor.
50
M6
M8 M 10
STM/H
M6 M8
Yellow zinc M 12 plated Steel Thread (Zn)
Typical Applications:
Cable trays, handrails, brackets, staircases, ladders, machines, window panels, base plates, scaffoldings and frameworks .
M 10
Order examp
M6 M8 M 10 M 12
Metal Products
Technical Data:
M H A steel Sleeve Anchor - zinc plated steel. Throughbolt, stainless A4/316 - stainless steel [ SS 304 (A2) , SS 316 (A4) ].
Bending Moment (Nm) Screw Grade
Materials:
M6 M8 M10 M12
3.9 17 34 60
Fea tur es example Sma ll Order Torqu Fea tur es Zinc p Europea n Technica l Approva l O pti Throu
Setting Data:
Edge distance > 1,5 x H eff., distance between anchors > 3 x H eff. Thickness of foundation > 2 x H eff.
Size