Documente Academic
Documente Profesional
Documente Cultură
Statement of Confidentiality AQN jointly submits this document with the understanding that it will be held in the strictest confidence and will not be disclosed. No parts of this document should be duplicated or used for any purpose other than the evaluation of AQN- qualifications, without the prior written consent of AQN.
Excelcomindo
Classification: Confidential
AQN
1.0
Document History
Version Date Author(s) Description MOP initial version
ITDS
Confidential
Page 1 of 6
1.0
Document Sign-Off
XL Signature:
Date:
AQN/Mobixell
Signature:
Date:
Confidential
Page 2 of 6
1.0
Table of Contents
1
1.1 1.2
INTRODUCTION ....................................................................................................... 4
REQUEST SUMMARY ..................................................................................................................... 4 CONTACT INFORMATION .............................................................................................................. 5
2
2.1 2.2 2.3
Confidential
Page 3 of 6
1.0
1 INTRODUCTION
1.1 Request summary
Activity Request System to be Changed Date of Activity Change description XL MIP Routers MIP SBY2 site XX/XX/XXXX Time XX:XX XX:XX Test connectivity by dummy P2P to confirm physical condition of ports and cables.
Confidential
Page 4 of 13
1.0
Confidential
Page 5 of 13
1.0
2 METHOD OF PROCEDURE
2.1 Method of procedure and check list
# Description / notes Expected Duration Change Completion Verification Done By Status Status
1 2
Pre-sanity check Login to MCD SBY2 routers In privileged EXEC mode SBYRKO03-RO-MIP01> enable Do a : SBYRKO03-RO-MIP01# sh run Backup the running config either by doing a copy and paste to a text file or by FTP if allowed Confirm physical connection as below:
15 min 3 min
AQN DDI
3 4 5
In privileged EXEC mode Login to MIP router Assign a dummy P2P IP (e.g. 192.168.255.248/29) on the physical interface in MIP Router Te1/4 and CE Router 4/2/2.
5 min
DDI
7 8
Test ping If successful then physical link is confirm ok, activity done. Note: Follow up will be the expansion activity of SBY2 Router - PSCE
15 min
DDI
SBYRKO03-RO-MIP01 Te1/6
<>
PS-CESBRKO01 xe-5/2/2
10 min
HS IB SBY
Confidential
Page 6 of 13
1.0
Description / notes
Expected Duration
10
In privileged EXEC mode Login to MIP router Assign a dummy P2P IP (e.g. 192.168.255.248/29) on the physical interface in MIP Router Te1/4 and CE Router 4/2/2.
5 min
DDI
11 12
Test ping
If PING successful, then confirm there is port damage. Activity Done. Note: Follow up will be a TR vendor for damaged ports
15 min 5 min
DDI DDI
13
If PING is not successful then confirm physical cable is faulty and need to change. Activity Done. Note: Follow up will be a request to change cabling to cable vendor
5 min
DDI
14 15
24 hours AQN/MBX
Confidential
Page 7 of 13
1.0
# Description / notes
Expected Duration
Change Done By
Completion Status
Verification Status
1 2 3 4
Login to MCD CBT T1 routers In privileged EXEC mode Do a : cbt-c4900-1-t1# sh run In privileged EXEC mode Login to MIP router Remove all the Dummy P2P IP configuration and save it Do a sh run config To make sure configuration same with previous one Post-sanity check
5 6
5 min 20 min
DDI AQN
.: END OF DOCUMENTATION :.
Confidential
Page 8 of 13