Documente Academic
Documente Profesional
Documente Cultură
http://garnstudio.com/lang/en/includes/printpattern.php?id=5518&lang=en
Rosita
by DROPS Design
Knitted DROPS shawl with lace pattern in "Lace". DROPS 139-2 DROPS design: Pattern no LA-008 Yarn group A --------------------------------------------------------Measurements: Width at the top: approx. 140 cm when blocked Length mid back: approx. 75 cm when blocked Materials: DROPS LACE from Garnstudio 100 g colour no 3620, red DROPS CIRCULAR NEEDLE (80 cm) SIZE 3.5 mm NOTE: Read about the knitting tension below.
All yarns are DROPS yarns. Color charts and updated retailer lists at www.garnstudio.com
Prices as of 10.10.2013:
Yarn type DROPS LACE UNI COLOUR (100g) DROPS LACE MIX (100g) DROPS Needles & Hooks Max price 8.10 GBP 8.10 GBP from 1.00 GBP
Do you need help? Take a look at our video tutorials at www.garnstudio.com/lang/en/video.php Decrease - SKP Decrease - sl1, K1, psso Decrease K2tog (knit 2 together) Garter stitch Increase KFB (knit front back) Marking thread (MT) yo (yarn over)
1 of 6
10-Oct-13 3:41 PM
DROPS Design
http://garnstudio.com/lang/en/includes/printpattern.php?id=5518&lang=en
KNITTING TENSION: This garment is to be soaked and blocked/stretched to size afterwards so the knitting tension is not that important but to get a sense of whether you are working too loose/tight, work a test on needle size 3.5 mm in stocking st and get approx. 23 sts x 30 rows = 10 x 10 cm. GARTER ST (back and forth on needle): K all rows. PATTERN: See diagrams M.1 and M.2. Diagrams show pattern from RS. Pattern in diagram M.1A is reversed from pattern in diagram M.1B. INCREASE TIP: Work 5 sts in 1 st as follows: K 1, 1 YO, K 1, 1 YO, K 1. NOTE: To avoid a "fragile" middle st when inc 5 sts in this st, knit up sts both through middle st on needle and middle st from previous row at the same time. --------------------------------------------------------SHAWL: Worked back and forth on circular needle, work from mid back of neck and down. Cast on 3 sts on circular needle size 3.5 mm with Lace. Work as follows: Row 1: K 2 sts in 1st and 2nd st, and K 1 st in 3rd st = 5 sts. Row 2: K all sts. Row 3: K 1, K 2 sts in next st, insert a marker in next st (mid st), K 2 sts in next st, K 1 = 7 sts. Row 4: K all sts. Row 5 (WS): K 2 (= edge sts), P 3 and K 2 (= edge sts). Continue as follows: 2 edge sts in GARTER ST - see explanation above, diagram M.1A, 1 mid st in stocking st, diagram M.1B and 2 edge sts in garter st. When diagram M.1 has been worked, continue inc and pattern the same way, i.e. inc 4 sts on every row from RS. Work until the shawl measures approx. 42 cm measure mid back and lightly pull when measuring (finish after 1 row from WS). Continue in pattern and on next row (= from RS) inc mid st to 5 sts (4 sts inc) SEE INCREASE TIP. Work one more row from the WS purl the inc sts. Continue with diagram M.2 as follows: 2 sts in garter st, diagram M.2A over the first 2 sts, insert a marker, then diagram M.2B until the 3 sts in the middle (the middle st and 1 st on each side of this st), insert a marker, work the 3 middle sts in diagram M.2C, insert a marker, continue with diagram M.2D until 4 sts remain, insert a marker, work diagram M.2E over 2 sts and the last 2 sts in garter st. After 1 repetition of M.2 in height repeat last 2 rows in the patterns M.2B, M.2C and M.2D until finished measurements, and work M.2A and M.2E as follows: Work first row of M.2A: K2, start M.2A from beg again over next 2 sts, work M.2B over next 8 sts. Work first row of M.2E: work M.2D over first 8 sts, then start M.2E from beg again over next 2 sts, K2. Continue like this, incorporating new sts each side in pattern until piece measures approx. 60 cm / 23'' mid back (with a light pull). Cast off with 2 threads as follows: K 2 sts, slip them back on left needle and K them twisted tog (i.e. work in back loop of st instead of front). * Work 1 more st (= 2 sts on right needle), slip them back on the left needle, K them twisted tog *, repeat from *-* until all sts have been cast off. This is done to make the edge elastic for blocking.
BLOCKING: Place the shawl in lukewarm water until it is soaking wet. Carefully squeeze the water out of the shawl - do not twist the shawl - then roll the shawl in a towel and squeeze to remove more water - the shawl will now only be moist. Place the shawl on a carpet or mattress - carefully stretch it out to size and fasten it with pins. Leave to dry. Repeat the process when the garment has been washed.
2 of 6
10-Oct-13 3:41 PM
DROPS Design
http://garnstudio.com/lang/en/includes/printpattern.php?id=5518&lang=en
DROPS Max Prices - Your guarantee of a great purchase! We know that you invest a lot of time and effort in your knitting projects. When you choose to use our patterns, it is therefore a pleasure for us to provide you with affordable quality yarn that ensures a great result. As Northern Europe's largest brand of hand knitting yarns and designs, we have unique opportunities to work with the very best raw materials and make savings that benefit you. That's why you can buy DROPS yarn 20-30% cheaper than similar products! DROPS SUPERSTORE Nordic Mart
3 of 6
10-Oct-13 3:41 PM
DROPS Design
http://garnstudio.com/lang/en/includes/printpattern.php?id=5518&lang=en
4 of 6
10-Oct-13 3:41 PM
DROPS Design
http://garnstudio.com/lang/en/includes/printpattern.php?id=5518&lang=en
www.garnstudio.com
We take pride in providing knitting and crochet patterns that are correct and easy to understand. All patterns are translated from Norwegian and you can always check the original pattern for measurements and calculations. All
patterns are carefully reviewed, but we make reservation for possible mistakes. In the case of discrepancies please post your remark in "knitting help" or contact your local Garnstudio retailer.
This document, including all its sub-sections, has copyrights. Read more about this by clicking on the "Copyright" link on the footer of our website.
5 of 6
10-Oct-13 3:41 PM
DROPS Design
http://garnstudio.com/lang/en/includes/printpattern.php?id=5518&lang=en
6 of 6
10-Oct-13 3:41 PM