Documente Academic
Documente Profesional
Documente Cultură
JETRIKE
An Open Design
Copyright (c) 2007, Henry Thomas All rights reserved. Redistribution and use of plans, with or without modification, are permitted provided that the following conditions are met: 1. 2. Redistributions of plans must retain the above copyright notice, this list of conditions and the following disclaimer. Neither the name of Henry Thomas or JETRIKE nor the names of any contributors may be used to endorse or promote products derived from these plans without specific prior written permission.
THESE PLANS ARE PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INJURY OCCASIONING BODILY HARM OR DEATH; LOSS OF PROFITS; PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THESE PLANS, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Specificatioins
JETRIKE.COM
Lean Steer Trike
Dwg. No. Size Rev
AN OPEN DESIGN Redistribution and use of these plans in electronic or printed form, are permitted provided all the conditions of the open design license are met. See Page 1 for details. Henry Thomas 2007, All Rights Reserved. Material: 316 Stainless Weight: 12kg Finish: Bare Metal Do Not Scale Drawing
Drive Train
A4
Jetrike
Scale 1:10
Sheet 2 of 16
1.37 34.8
68
50 40 2 30
B
R8
16 30
1.5 6 39 .7
B
8
C
12
R5
R1 0
30
12
15
39.7
JETRIKE.COM
Title
D
Size
BB Mount
Dwg. No.
AN OPEN DESIGN Redistribution and use of these plans in electronic or printed form, are permitted provided all the conditions of the open design license are met. See Page 1 for details. Henry Thomas 2007, All Rights Reserved. Material: Mild Steel Weight: 332g Finish: Painted Do Not Scale Drawing
50
1
M8 Thread
2
A4
Jetrike
Rev
Scale 1:1
Sheet 3 of 16
Item 14
Item 15
45
278.6
60
6.7
40
35
45
JETRIKE.COM
Title
15
17
1.8
Drive Train
Dwg. No.
70
AN OPEN DESIGN Redistribution and use of these plans in electronic or printed form, are permitted provided all the conditions of the open design license are met. See Page 1 for details. Henry Thomas 2007, All Rights Reserved. Material: 316 Stainless Weight: 3.08kg Finish: Bare Metal Do Not Scale Drawing
DETAIL A
Size
A4
Jetrike
Rev
Scale 1:4
Sheet 4 of 16
434.9
A A
75
40
8.3
Item 15 424.2
10.7
75
22.5
B
Item 16 187.8
23
22.5
8.3
C
40
Item 3
33.7
143.6
8.3
D
8.3 43.6
1
JETRIKE.COM
Title
Item 17 42
2
Size
Drive Train
Dwg. No.
AN OPEN DESIGN Redistribution and use of these plans in electronic or printed form, are permitted provided all the conditions of the open design license are met. See Page 1 for details. Henry Thomas 2007, All Rights Reserved. Material: 316 Stainless Weight: 3.08kg Finish: Bare Metal Do Not Scale Drawing
A4
Jetrike
Rev
Scale 1:2
Sheet 5 of 16
35
19 .8
40 x 5mm Flat 40
R22 .5
31.8
98.5
20
R20
5.5 14.5
C
29.5
37
M1 0
R12
7.5
45
R8
R5
Items 33, 34 & 35 in the cut list are a single piece with a bend
JETRIKE.COM
Title
D
Size
Left Dropout
Dwg. No.
AN OPEN DESIGN Redistribution and use of these plans in electronic or printed form, are permitted provided all the conditions of the open design license are met. See Page 1 for details. Henry Thomas 2007, All Rights Reserved. Material: 316 Stainless Weight: 117g Finish: Bare Metal Do Not Scale Drawing
A4
Jetrike
Rev
Scale 1:1
Sheet 6 of 16
35
40 x 5mm Flat
.5 R22
B
.8 19
40
77
R5
31.8 20 5
12.5
20
12.5
Items 33, 34 & 36 in the cut list are a single piece with a bend
JETRIKE.COM
Title
0 R2
Right Dropout
Dwg. No.
D
Size
AN OPEN DESIGN Redistribution and use of these plans in electronic or printed form, are permitted provided all the conditions of the open design license are met. See Page 1 for details. Henry Thomas 2007, All Rights Reserved. Material: 316 Stainless Weight: 103g Finish: Bare Metal Do Not Scale Drawing
A4
Jetrike
Rev
Scale 1:1
Sheet 7 of 16
35
32.
0 0.5 7 12.
.4 42
18
35
B
17
17
10
18mm Round Item 30 18 CHS Nominal Bore 32mm Extra Heavy Item 18 70
C
4.9
C
2.7
32.6 42.4
10
17
D
JETRIKE.COM
Title
AN OPEN DESIGN Redistribution and use of these plans in electronic or printed form, are permitted provided all the conditions of the open design license are met. See Page 1 for details. Henry Thomas 2007, All Rights Reserved. Material: 316 Stainless Weight: 360g Finish: Bare Metal Do Not Scale Drawing
35
Size
A4
Jetrike
Rev
Scale 1:1
Sheet 8 of 16
R30
60.3
55
7 R2
4.2
CHS Nominal Bore 50mm Extra Light This is a bit too heavy, a lighter 60mm OD tube would be better, but would be harder to bend.
C
30.2
JETRIKE.COM
Title
D
Size
Fender
Dwg. No.
AN OPEN DESIGN Redistribution and use of these plans in electronic or printed form, are permitted provided all the conditions of the open design license are met. See Page 1 for details. Henry Thomas 2007, All Rights Reserved. Material: 316 Stainless Weight: 407g Finish: Bare Metal Do Not Scale Drawing
A4
Jetrike
Rev
Scale 1:2
Sheet 9 of 16
Item 5
32
0 R2
20
Item 42 20 20 20 45
85
25
40 Item 37 Item 38
JETRIKE.COM
Title
Frame
Dwg. No.
AN OPEN DESIGN Redistribution and use of these plans in electronic or printed form, are permitted provided all the conditions of the open design license are met. See Page 1 for details. Henry Thomas 2007, All Rights Reserved. Material: 316 Stainless Weight: 3.15kg Finish: Bare Metal Do Not Scale Drawing
65
40
1 2
Size
A4
Jetrike
Rev
Scale 1:4
Sheet 10 of 16
369.8
A
40
A
40
47.7
Item 6
8
20
4
B
322.1
. 78
60
217.9
23.1 48.9
C
Item 7
8.2 Item 8
61
40 Item 4
.6
522
68.1
21.6
JETRIKE.COM
Title
46.4
73
Item 5
Frame
Dwg. No.
AN OPEN DESIGN Redistribution and use of these plans in electronic or printed form, are permitted provided all the conditions of the open design license are met. See Page 1 for details. Henry Thomas 2007, All Rights Reserved. Material: 316 Stainless Weight: 3.15kg Finish: Bare Metal Do Not Scale Drawing
Size
A4
Jetrike
Rev
Scale 1:2
Sheet 11 of 16
33
Item 11
1.13 28.6
.7
27.3
Flat 32 x 5mm Item 40
73.2 30
28.6
50
Item 10
27.3
335
.5 R1 2
0.25 6.4
6 R1 .9
Item 19
16
33.7
25
12.5
Title
JETRIKE.COM
Rocker Arm
Dwg. No. Size Rev
AN OPEN DESIGN Redistribution and use of these plans in electronic or printed form, are permitted provided all the conditions of the open design license are met. See Page 1 for details. Henry Thomas 2007, All Rights Reserved. Material: 316 Stainless Weight: 755g Finish: Bare Metal Do Not Scale Drawing
Item 40 25
1
Item 11
2
A4
Jetrike
Scale 1:4
Sheet 12 of 16
Endcap Plate 35 x 35 x 1.5mm Item 44 Bush 18mm Round Item 31 281.5 Item 9
SHS 35 x 35 x 1.6mm Item 9 Endcap Plate 20 x 20 x 1.5mm Item 46 CHS Nominal Bore 25mm Light Item 20
6 R1
.9
90
.7
28.6
376.3
14
Item 31 60 17.5
18
33
18
R16
27.
C
20
49.2
Item 39 32
60.7
Item 12 10
17.5 35
0.25 6.4
JETRIKE.COM
Title
Swing Arm
Dwg. No.
AN OPEN DESIGN Redistribution and use of these plans in electronic or printed form, are permitted provided all the conditions of the open design license are met. See Page 1 for details. Henry Thomas 2007, All Rights Reserved. Material: 316 Stainless Weight: 902g Finish: Bare Metal Do Not Scale Drawing
R16.9
70
33.7
1 2
Size
A4
Jetrike
Rev
Scale 1:4
Sheet 13 of 16
135
243
180
. 243
5
CHS Nominal Bore 15mm Light Items 28 & 29 in the cut list are a single peice with a bend
35
45
.5
40
27
4.9 140
B
150
CHS Nominal Bore 15mm Light Items 21, 22, 23, 24, 25, 26, & 27 in the cut list are a single piece with bends
19
55
10
R1 0
100
42.5
20
35.5
JETRIKE.COM
Title
Seat
Dwg. No.
AN OPEN DESIGN Redistribution and use of these plans in electronic or printed form, are permitted provided all the conditions of the open design license are met. See Page 1 for details. Henry Thomas 2007, All Rights Reserved. Material: 316 Stainless Weight: 2.66kg Finish: Bare Metal Do Not Scale Drawing
R10.7
1
Item 41
Size
A4
Jetrike
Rev
Scale 1:4
Sheet 14 of 16
28
A
29 30 31
47
27 26 25 24 23
46
45 44 43 42 41
22 21 18 17 16 19
20
15 13 1 2 3 8 4 33
1
14 11 10 9 7 35
2
12 40 39 38
D
5 34
36
37
32
DESCRIPTION BB Shell British 1.37 x 24 TPI SHS 50 x 50 x 5.0mm SHS 40 x 40 x 1.6mm SHS 40 x 40 x 1.6mm SHS 40 x 40 x 1.6mm SHS 40 x 40 x 1.6mm SHS 40 x 40 x 1.6mm SHS 40 x 40 x 1.6mm SHS 35 x 35 x 1.6mm SHS 30 x 30 x 1.6mm SHS 30 x 30 x 1.6mm SHS 20 x 20 x 1.6mm RHS 40 x 20 x 1.5mm RHS 40 x 20 x 1.5mm RHS 40 x 20 x 1.5mm RHS 40 x 20 x 1.5mm RHS 40 x 20 x 1.5mm CHS Nominal Bore 32mm Extra Heavy CHS Nominal Bore 25mm Medium CHS Nominal Bore 25mm Medium CHS Nominal Bore 15mm Light CHS Nominal Bore 15mm Light CHS Nominal Bore 15mm Light CHS Nominal Bore 15mm Light CHS Nominal Bore 15mm Light CHS Nominal Bore 15mm Light CHS Nominal Bore 15mm Light CHS Nominal Bore 15mm Light CHS Nominal Bore 15mm Light Round 16mm Round 16mm Square 12mm Flat 40 x 5mm Flat 40 x 5mm Flat 40 x 5mm Flat 40 x 5mm Flat 40 x 5mm Flat 40 x 5mm Flat 32 x 5mm Flat 25 x 5mm Flat 20 x 5mm Flat 32 x 3mm Plate 40 x 40 x 1.5mm Plate 35 x 35 x 1.5mm Plate 30 x 30 x 1.5mm Plate 20 x 20 x 1.5mm CHS Nominal Bore 50mm Extra Light SHS 40 x 40 x 1.6mm SHS 30 x 30 x 1.6mm RHS 40 x 20 x 1.5mm CHS Nominal Bore 25mm Medium CHS Nominal Bore 15mm Light Flat 40 x 5mm
C B
QTY. 1 1 1 1 1 1 1 1 2 1 1 2 1 2 2 2 2 1 1 2 2 2 2 2 2 2 2 2 4 1 2 2 2 2 1 1 5 3 2 2 4 2 2 2 2 2 1
LENGTH 68 30 143.6 73 68.1 369.8 249.2 522 376.3 73.6 335 60 38.3 43.6 434.9 198.5 42.2 70 50 70 197.9 96 123.1 29.5 228.5 61.1 148.5 78.5 202.1 70 35 14 23.4 12.2 65.8 44.3 85 45 60.7 41 42.5 66.1
TOTAL 68 30 143.6 73 68.1 372 249.7 522 751.6 73.7 335 120 38.3 87.2 869.8 398 84.4 70 50 140 395.8 192 246.2 59 457 122.2 297 157 808.4 70 70 28 46.8 24.4 65.8 44.3 425 135 121.4 82 170 132.2
234.2