Documente Academic
Documente Profesional
Documente Cultură
Company Name:
and Location (city,ST)
Note: Lead time varies greatly based on meter sizes, materials and quantity ordered. Refer to quote for specific lead time for your meters. Requested Delivery Date: Ship Meters Via:
Ship to Address:
Specifying Engineer/Location:
(Engineering firm, city, ST) ONICON specified by name?
Meter #1
Meter #2
Meter #3
Meter #4
Typical Configuration
1- Standard
Body & Liner Materials : 1- Carbon steel body/ PTFE liner 2- Carbon steel body/ Polypropylene liner 3- Carbon steel body/ Ebonite liner 4- 304SS body/ PTFE liner (check lead time) 5- 316SS body/ PTFE liner (check lead time) Connection Type: 0- Wafer 1- ANSI Class 150 Flanges 3- ANSI Class 300 Flanges Transmitter Mounting Options: 1-Integral 2-Remote w/o Pre-amp: 65 ft max 3-Remote w/Pre-amp: 1600 ft max(F-32xx only) Remote Mount Cable Length in Feet: 16, 32, 49 or 65 (>65ft, specify) Power Supply: A- Low voltage(LV) 15-40 VAC or VDC B- High voltage(HV) 120/240 VAC 50/60Hz # of 316SS Electrodes: A- 2 Electrodes B- 3 Electrodes C- 2 Electrodes with grounding rings
1 for all HW applications 2 for low temp 6" and smaller 3 for low temp 8" and larger 4&5 for special process applications only- special order
1- ANSI-150 Flange wafer type is also common for smaller sizes < 6"
1- Integral for chilled water and hot water below 212 F 2- Remote w/o pre-amp for hot water from 212 - 266 F Not provided for integral mount Both power supplies require an earth connection for proper operation A- 2 for carbon steel pipe B- 3 electrodes, or, C- ground rings required for non-metallic or lined pipe
APPLICATION INFORMATION:
Used to configure/program the meter
FLOW METER MODEL: (Correct model will show based on information entered above) METER TAG INFORMATION: (text on laminated tag attached to meter) APPLICATION TYPE:
(CHW, HW, make-up, boiler feed, etc.)
F-3-
F-3-
F-3-
F-3-
LIQUID TYPE:
(water, x% ethylene glycol, brine, etc.)
PIPE SIZE:
(nominal diameter)
PIPE MATERIAL:
(i.e: carbon steel, pvc, etc.)
Yes / No
DESIGN MAXIMUM FLOW RATE:
Maximum flow per system design
To Be Used with SYSTEM 10 BTU Meter: Yes / No (if yes, please complete Sys-10 form)
Full Bore Mag Flow Meter Order Form-Flanged-Wafer Type.xls Rev 09/08