Documente Academic
Documente Profesional
Documente Cultură
CAD to FEA
Materialise offers you a total solution for signicantly reducing turn-around times for geometry preparation and adaptation for FEA and CFD. Applying the forward engineering principle saves time and money. Now you can generate optimized FE meshes directly from scanned data and from CAD data. In addition, our technology allows you to make design changes immediately on FE meshes.
Courtesy of Minho University Courtesy of Hansen Transmissions International Courtesy of BRP-Rotax GmbH & Co. KG Courtesy of K.U. Leuven
Materialise provides you with a shortcut to CAE, particularly when youre dealing with complex CAD, scan data or the combination of data originating from multiple sources. Our alternative, rapid process chain for pre-processing scan data for FEA/CFD eliminates time-consuming, error-prone reverse engineering.
3-matic software converts CAD data as well as scan data easily into a consistent, clean, and optimal FE mesh. File xing, which is very time-consuming on the CAD level, is completed quickly with 3-matics range of automated tools. Our remesh technology easily generates high quality surface or volume meshes. Working with a mesh from the outset reduces geometry preparation times.
Improve correlation far beyond FEA obtained from CAD data by accurately capturing physical shape in the FEA mesh. FEA on parts without CAD (e.g. legacy parts) is no longer impossible or uneconomical. Use our FE technology to study behavior instead of just geometry of scanned parts. 3-matic allows you to reconstruct and optimize point cloud data directly. Within minutes, Materialise image processing technology, Mimics, translates Technical Computed Tomography and micro-CT scan data into an accurate, full 3D model that can be manipulated further using 3-matic.
1. Wrapping of CAD assembly for UTM 2. Scan data repair of oil pan captured with our in-house GOM Atos 2 scanner 3. Morphing the design of a car (blue: original design, green: morphed design) 4. Trust on our Engineering & Consultancy Services for a complete solution
Our array of services includes: Precise digitizing of your parts through optical, technical CT or micro-CT scanning Geometry preprocessing and solving Engineering and design optimization Scan data to CAD le comparison CAD data generation of your optimized mesh data
Made by Materialise
Materialise started as a specialist in rapid prototyping and manufacturing in 1990 and has almost 20 years of core competence in le repair, surface mesh (STL) manipulation and image processing. Based on this knowledge, and its acquired expertise in CAE software solutions, Materialise is the perfect partner for those who are involved in simulations on complex geometry. Materialise has several subsidiaries in Europe, Asia and the USA, and employs over 700 people.
3-matic, Mimics, Materialise, and other names mentioned in this yer are registered trademarks and/or trade names either owned by or licensed to Materialise. No user has any right, title, or interest in those marks or names not previously expressly granted in writing to such user by Materialise.
www.materialise.com