Documente Academic
Documente Profesional
Documente Cultură
Resin finish
Comparison of traditional Easy Care finish with a No Iron finish Smoothness Appearance: ( 3 x 40C washed, tumble dried )
only softened Easy Care finish No Iron finish
Resin finish
Different methods to determine the smoothness appearance Common evaluation methods for smoothness appearance are: " Smoothness Appearance of fabrics after repeated home launderings "
AATCC 124
Monsanto
Smoothness Appearance AATCC 124 (Idem fr M&S P134) DIN 53895
1 1 1
2 3 2 2
3.5
3 4
5 3.5 6
4 8
5 10
Resin finish
Smoothness Appearance of fabrics after repeated home launderings
SA-1 SA-2
AATCC 124
SA-3
SA- 4
Resin finish
Comparison of different resin finish processes
Washing Suitable for reactive after dyed curing goods necessary no yes
0-2
3.5-5
30-80
140 - 160
3 min
non-swollen
standard
0-1
3.5-5
30-80
150 - 190
30 - 10 sec
non-swollen
standard
no
yes
0-3
2- 4
150-200
130
3 min
non-swollen
good
yes
yes
Moist-Cure
7-10
0.5 - 1.5
150-200
25 - 35
20-24 h
partly swollen
very good
yes
no
Resin finish
Comparison of different resin finish processes
Dry-Cure process:
Moist-Cure process:
4) Top finish
3) Wash off
4) Top finish
6
Resin finish
Easy Life Finish
The uncomplicated Easy Care finish with variable building block system For woven knit goods of cotton and their blends with synthetic fibres One stage process Guide recipe 100 % Co fabric (lightweight fabric; white or coloured goods)
Stage 1 30-80 10-16 15-30 20-30 3-5 0.5 g/l Arkofix NDF liq c g/l Catalyst NKC liq g/l Ceraperm MW liq conc g/l Velustrol P40 liq g/l Appretan MB extra g/l Sandozin MRN liq c
- pad cold - Pickup 60-70 % - dry at 120 C, then cure 150C 3 minuntes
Resin finish
LT-Cure Finish
The comprehensive low risk finish for highest demands as an alternative to moist crosslinking with almost the same effects (no change of shade) For woven goods of 100 % Cotton. Three stage process Guide recipe for 100 % Co fabric (120g/m2)
Stage 1 Resin finish 150-210 g/l Arkofix NDF/NEC Plus liq c* 25-32 g/l Catalyst LT1 liq 10-30 g/l Ceraperm MW liq conc 30-40 g/l Velustrol P40 liq 0.5 g/l Sandozin MRN liq c - pad cold - pickup 60-70 % - dry at 80C to residual humidity of 5-8%, - then cure 3 min at 130C Stage 2 Openwidth washing 0.5 g/l Sandoclean PC liq - openwidth wash at 40C - rinse & dry Stage 3 Top finish 0.5 g/l acetic acid 60 % 30-40 g/l Ceraperm MW liq conc 40 g/l Ceranin HDP liq 0-5 g/l Appretan MB extra 0.5 g/l Sandozin MRN liq c - pad cold, pickup 60-80 % - dry at 130C - sanforize if necessary
Resin finish
Moist-Cure
The complex State of the Art finish with a technically demanding background For woven goods of 100% Cotton. Three stage process Guide recipe for 100 % Co fabric (120g/m2)
Stage 2 Openwidth washing with soda ash Stage 1 Resin finish and Sandoclean PC liq 180-240 g/l Arkofix NDL liq conc - neutralize at 60C 0-30 g/l Ceraperm MW liq conc - rinse, neutralize cold with acetic acid 25-40 g/l Ceranine HDP liq - rinse & dry 0.5 g/l Sandozin MRN liq c 4-7 g/l sulphuric acid conc (for details see separate sheet) - pad cold Stage 3 Top finish - pickup 70-80 % 0.5 g/l acetic acid 60 % - dry at 90-100C to 7-10 % residual humidity 30 g/l Ceraperm MW liq conc - roll and batch at 25-35C for 20-24 h 40 g/l Ceranine HDP liq 0-5 g/l Appretan MB extra 0.5 g/l Sandozin MRN liq c - pad cold, pickup 60-80 % - dry at 130C - sanforize if necessary
Resin finish
Moist-Cure
The complex State of the Art finish with a technically demanding background For woven goods of 100% Cotton. Three stage process Guide recipe for 100 % Co fabric (120g/m2)
Stage 2 Openwidth washing with soda ash Stage 1 Resin finish *) and Sandoclean PC liq 180-240 g/l Arkofix MCL liq conc - neutralize at 60C 0-30 g/l Ceraperm MW liq conc - rinse, neutralize cold with acetic acid 25-40 g/l Ceranine HDP liq - rinse & dry 0.5 g/l Sandozin MRN liq c *) (for details see separate sheet) 110 g/l Catalyst MC1 liq 0.4-0.6 ml/l HCl 36-38 % Stage 3 Top finish - pad cold 0.5 g/l acetic acid 60 % - pickup 70-80 % 30 g/l Ceraperm MW liq conc - dry at 90-100C to 6.5-7 % residual humidity 40 g/l Ceranine HDP liq - roll and batch at 30-35C for 22-24 h 0-5 g/l Appretan MB extra 0.5 g/l Sandozin MRN liq c - pad cold, pickup 60-80 % - dry at 130C *) is not available in all countries - sanforize if necessary
10
Resin finish
Influence of moisture in Moist-Cure process
Crease recovery angles in
160 150 140 130 120 110 100 90 80 70 60 In this area: too much loss of strenght Optimum in effects and strenght 7 9 In this area: effects not good enough Wet crease angles
50
1 3 5 11 13
Moisture in %
Resin finish
Influence of drying temperature in Moist-Cure process
Loss in % 100 % Cotton finished with Glyoxal resin and catalysed with sulfuric acid
Tensile strength
Abrasion
Resin finish
Important points for Moist-Cure process